National Biofilms Innovation Centre

Lead Research Organisation: University of Southampton
Department Name: Sch of Biological Sciences

Abstract

The University of Southampton will receive the award on behalf of the lead institutions of the NBIC consortium (University of Southampton, University of Liverpool, University of Nottingham and the University of Edinburgh). The University of Southampton will also be responsible for the disbursement of funds to the lead institutions of the NBIC consortium. The Grant Holder will be Jeremy Webb (Principle Investigator, Corresponding) on behalf of the NBIC Consortium lead investigators Jeremy Webb (Southampton), Rasmita Raval (Liverpool), Cait MacPhee (Edinburgh) and Miguel Camara (Nottingham)".
Biofilms are central to some of the most urgent global challenges and exert considerable economic impact across industry sectors. They are a leading cause of antimicrobial resistance (AMR), forecast to cost $100tn in world GDP and 10m deaths by 2050. Biofilms are the major cause of chronic infections, costing the NHS £2bn p.a. Contamination, energy losses and damage by biofilms impact on the £70bn UK foods industry, the $2.8 trillion consumer products sector, and $117bn global coatings industry. Biofilm management is essential to deliver clean and globally sustainable drinking water and food security.
The National Biofilms Innovation Centre (NBIC) will deliver a future where biofilms can be effectively controlled and harnessed, increasing value for the companies we work with, and providing pathways to impact for world-class research across the UK. NBIC will bring UK companies from across the industrial sectors around the table with the best of UK biofilm research to accelerate the adoption of new technologies into company products and services. Where companies are not ready to take an opportunity to market, we will provide world class entrepreneurial training to maximise the success of our spin outs
NBIC will provide a focus for industry partners to access biofilm research across the UK, simplifying knowledge transfer and catalysing collaboration. Working with industry, NBIC will produce sector roadmaps, identifying the unmet needs of the sectors, and the key scientific, commercial, technical and regulatory barriers to meet them. The roadmaps will provide a key context for the evolution of the NBIC science strategy.
NBIC will leverage existing investments in research, facilities and people to address near and long term industrial and societal challenges and to establish a pathway for the accelerated adoption of new biofilm innovations and technologies, whilst significantly promoting the expansion of a highly trained researcher workforce in this field.
We will develop the next generation of leaders in biofilms with bespoke scientific, entrepreneurial and leadership training, and we will undertake International exchanges of students and staff with SCELSE biofilms centre in Singapore. We will engage with all of the university doctoral colleges with a view to submitting a bid to the 2019 DTP call.
We will draw on the considerable outreach and engagement experience of the NBIC partners to share and develop tailored events and activities suitable for primary and secondary schools, CPD for teachers, science festivals, youth groups and community-based organisations throughout the UK.

Technical Summary

Technical Summary
NBIC will work across 4 strategic themes to prevent, detect, manage and engineer biofilms, capitalising on world-class underpinning research to address sectoral challenges identified with our industry partners. NBIC will work with industry, regulators, funders and policymakers, and engage the public in a two-way dialogue to refine the research and industrial strategy agenda, shape public funding initiatives and determine strategy for industrial pre- and post-competitive research.
The strategy and remit of the 4 themes are as follows:
PREVENT: Prevention of early stage microbial adhesion and colonisation events at surfaces. Advanced techniques to create next-generation biofilm prevention strategies.
DETECT: Accurate, quantitative biofilm detection and metrology across multiple scales through innovative sensing, tracking and diagnostic technologies. Identify and exploit new and known biofilm-specific biomarkers.
MANAGE: To kill, remove or control established biofilms by understanding and exploiting their life cycle dynamics and development across a range of environments and levels of complexity.
ENGINEER: Harness the benefits of complex microbial consortia from knowledge of their composition, function, ecology and evolution. Exploit biofilm understanding at the interface with engineering and process applications.
CROSS-CUTTING THEME: PREDICTIVE MODELLING. This theme will exploit our expertise in computational and mathematical tools for understanding, modelling and simulating biological and physical processes and activities of biofilms.
By addressing the scientific challenges and strategy outlined above, NBIC will help companies create value by benefiting from biofilms or by addressing the challenges that they face caused by biofilms.

Planned Impact

Impact summary

The National Biofilms Innovation Centre will bring together academic researchers from multiple disciplines; facilitate existing academic/industry collaborations where relevant and appropriate; broker new interactions between the academic research base and industry; and draw upon world-class underpinning bioscience to address unmet industry needs. NBIC will create the world's premier centre for biofilms training and research, and ensure its translation into capacity building and innovation.

NBIC will engage with industry by facilitating knowledge integration and capacity building. NBIC will be a single point of call for companies with challenges that relate to biofilm technologies, whether the challenge is to prevent (e.g. in human health applications), detect (e.g. in potable water systems), manage (e.g. in wastewater treatment plants) or engineer (e.g. in industrial biotechnology applications). Given this wide field of potential sectors, NBIC will draw on and facilitate links with all relevant disciplines across the physical, life, medical and social sciences. The goal is bidirectional: to ensure the maximum impact of world-class underpinning science, as well as respond directly to unmet industry needs. NBIC will achieve this by: establishing sector-specific roadmaps to educate and influence the academic base; the allocation of joint academic/industry collaborative funding; provision of entrepreneurial training for early career researchers and established academics; and the organisation of multiple different types of events, all designed to enrich relationships between Universities and companies.

Market analysis indicates that the formation, control, removal or use of biofilm technology has a global impact on economic activity of $5,000bn. Fundamental scientific breakthroughs remain to be made, and the purpose of NBIC is to form a UK-wide collaborative community best able to make these breakthroughs, and ensure their translation into products, services, devices, materials and protocols that will benefit the general public.

By delivering a coherent national response to the challenges in biofilms research, NBIC will increase the efficiency and impact of the research across the UK for all the academics that work with it.

We will create value for the companies we work with by placing at the heart of our research strategy, solving their problems and helping them access new opportunities.

By providing companies and society with new tools to prevent, detect, manage and engineer biofilms we will significantly reduce the harm that they cause and improve clinical outcomes from persistent infections and biofilm related disease.

We will develop the next generation of leaders in biofilms with bespoke scientific, entrepreneurial and leadership training, and we will undertake International exchanges of students and staff with SCELSE biofilms centre in Singapore. We will engage with all of the university doctoral colleges with a view to submitting a bid to the 2019 BBSRC DTP call.

We will draw on the considerable outreach and engagement experience of the NBIC partners to share and develop tailored events and activities suitable for primary and secondary schools, CPD for teachers, science festivals, youth groups and community-based organisations throughout the UK.

Organisations

Publications

10 25 50
 
Title #BiofilmAware social media assets 
Description Social media assets and headers to help raise awareness of what biofilms are and why they are so important and to promote the #BiofilmAware campaign. 
Type Of Art Artwork 
Year Produced 2020 
Impact Social media assets and headers to help raise awareness of what biofilms are and why they are so important and to promote the #BiofilmAware campaign. 
URL https://www.biofilms.ac.uk/biofilmaware/
 
Title #BiofilmWeek social media assets 
Description Social media assets and headers to help raise awareness of what biofilms are and why they are so important and to promote #BiofilmWeek, an initiative which is part of the #BiofilmAware campaign. 
Type Of Art Artwork 
Year Produced 2021 
Impact Social media assets and headers to help raise awareness of what biofilms are and why they are so important and to promote #BiofilmWeek, an initiative which is part of the #BiofilmAware campaign. 
URL https://www.biofilms.ac.uk/biofilmweek/
 
Title A New Weapon Against Pseudomonas aeruginosa, with Bhavik Bharochia from the University of Southampton. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/pseudomonas-aeruginosa-a-new-weapon/
 
Title Antibiotic Resistance in Skin Wound Infections, with Snehal Kadam from the University of Hull. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/antibiotic-resistance-infections/
 
Title Article and drawing produced by primary school children (J C Denis) 
Description 2 P7 children wrote and article and produced a drawing of the Edinburgh NBIC PI, following a series of events I organised. 
Type Of Art Artwork 
Year Produced 2020 
Impact Very high quality science interview produced. 
URL https://blogs.ed.ac.uk/physics-astronomy/2020/09/21/interview-with-cait-macphee/
 
Title Battling Bacterial Vaginosis, with Ryan Kean from Glasgow Caledonian University. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/bacterial-vaginosis/
 
Title Biofilm Brainhub website 
Description The Biofilm Brainhub was funded by the National Biofilms Innovation Centre (NBIC) Public Engagement Grant 2020-2021. 
Type Of Art Artistic/Creative Exhibition 
Year Produced 2021 
Impact The website has been built with the support of the wider research community and features information on biofilms for a wide range of publics, through multiple clickable layers of information. We hope this will be the "go-to website" for anyone looking to learn about biofilms. 
URL https://biofilmbrainhub.co.uk/
 
Title Biofilm Embroidery series 
Description Series of 4 pieces of embroidery depicting biofilms as imagined by embroiderer: Ruby Tait Collaboration: Jean-Christophe Denis 
Type Of Art Artwork 
Year Produced 2022 
Impact Embroiderer submitted embroidery as part of the NBIC Art Competition - and won. Alos, to be displayed at exhibition in 2023. 
 
Title Biofilm Image Gallery 
Description In January 2021 we launched our first biofilm photography competitions as part of our #BiofilmAware campaign, which works to raise awareness of NBIC and its research, and the many societal and economic impacts of biofilms. 
Type Of Art Artwork 
Year Produced 2021 
Impact This biofilm image gallery contains a selection of images from our 'Biofilms in the lab' and 'Biofilms in Real Life' photography competitions. 
URL https://www.biofilms.ac.uk/biofilm-image-gallery/
 
Title Biofilm, Mutants and Mass Spectrometry, with Winifred Akwani from the University of Surrey. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/mass-spectronomy-biofilm/
 
Title Bioiflms animation video. (J C Denis) 
Description Animation movie to describe the biofilms research in Edinburgh. 
Type Of Art Film/Video/Animation 
Year Produced 2020 
Impact Animation movie to describe the biofilms research in Edinburgh. 
URL https://youtu.be/-MpueLFcC1I
 
Title Biological Photovoltaics and Sustainability, with Maira Anam from the University of Nottingham. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/biological-photovoltaics-and-sustainability/
 
Title Coccus Pocus 2019 
Description Antibiotic resistance by pathogenic microorganisms is currently a major health concern, leading to a big rise of serious untreatable infections, especially in hospital environments. In addition, biofilms (slimy structures that microbes form around them) further protect the microbes against antibiotics, detergents and the attacks of our immune system. In October 2019, the Department of Biomedical and Forensic Sciences at the University of Hull launched an exciting scary story competition, Coccus Pocus 2019! The contestants were encouraged to write a short horror sci-fi story between 500 and 2,000 words, including antimicrobial resistance and microbial biofilms. 
Type Of Art Creative Writing 
Year Produced 2019 
Impact Prizes were awarded for first, second and third places with the stories being published on the NBIC website. 
URL https://www.biofilms.ac.uk/coccus-pocus-2019-a-microbiology-inspired-scary-story-competition/
 
Title Coccus Pocus 2020 
Description A horror sci-fi short story competition highlighting the importance of antibiotic resistance and biofilms. In an ambitious attempt to inform young people about the importance of antibiotic resistance and microbial biofilms, we will organise a horror sci-fi short story competition for this Halloween. The participants will be encouraged to write an engaging scary story, incorporating valid scientific information about AMR and biofilms. This will motivate them to read about these topics, understand the basic principles and use this information in their post-apocalyptic horror scenarios, in an educational and enjoyable way. 
Type Of Art Creative Writing 
Year Produced 2020 
Impact Prizes were awarded for first, second and third places with the stories being published on the NBIC website. 
URL https://www.biofilms.ac.uk/coccus-pocus-2020-halloween/
 
Title Coccus Pocus 2021 
Description A horror sci-fi short story competition highlighting the importance of antibiotic resistance and biofilms. In an ambitious attempt to inform young people about the importance of antibiotic resistance and microbial biofilms, we will organise a horror sci-fi short story competition for this Halloween. The participants will be encouraged to write an engaging scary story, incorporating valid scientific information about AMR and biofilms. This will motivate them to read about these topics, understand the basic principles and use this information in their post-apocalyptic horror scenarios, in an educational and enjoyable way. 
Type Of Art Creative Writing 
Year Produced 2021 
Impact Prizes were awarded for first, second and third places with the stories being published on the NBIC website. 
URL https://www.biofilms.ac.uk/coccus-pocus-2021-winning-stories
 
Title Combatting Cystic Fibrosis, with Declan Power from the University of Southampton. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/cystic-fibrosis/
 
Title Complex Polymicrobial Biofilms, with Shaun Robertson, from the University of Nottingham. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/complex-polymicrobial-biofilms/
 
Title Edinburgh Science Festival: Sherlock Holmes and the Biofilms Mystery 
Description Online activity pack: Sherlock Holmes needs your help to discover who broke into his apartment and why they did it! Can you use the clues to solve the mystery of the burglar? Use the clues and information provided about biofilms to find out WHO broke into Sherlock's apartment. 
Type Of Art Artistic/Creative Exhibition 
Year Produced 2021 
Impact Public engagement. 
URL https://storymaps.arcgis.com/stories/83be7dc3978d48f1932760c034f5afcf
 
Title Forming Biofilms Within 3D Environments, with Eirini Velliou from University College London. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/biofilms-within-3d-environments/
 
Title Girlguiding Dundee/WCAIR Virtual Sleepover: Science Camp! (Nicola Stanley-Wall) 
Description PEOPLE INVOLVED: A co-development between WCAIR researchers, the Girlguiding Dundee committee, and 2 senior female scientists from SLS WHAT WAS IT? A series of activity packs released over the course of a weekend to create the feeling of a sleepover. The packs were accompanied by a series of videos, a Teams Live event, and interaction on social media, particularly using a Facebook group 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact KEY OUTCOMES: 1600 people from across the UK signed up to take part, and the packs received over 6000 downloads. We had an incredibly busy weekend with thousands of images uploaded onto the Facebook group, and thousands of views on our YouTube videos. Well over 1000 people also signed up to receive their badge after the event. FUTURE PLANS: Continue our relationship with Girlguiding so that we can have an in-person sleepover in the future, and continue to use the resources developed for other projects, such as with Glasgow Science Centre. Quote: "Amazing range of activities and useful downloadable resources which we can use again. It was also a great way of introducing science to young people and to de-mystify it for them. So often it is taught in schools in such a dull way - excellent weekend! Virtual Sleepover attendee" 
URL https://discovery.dundee.ac.uk/en/publications/girlguiding-dundeewcair-virtual-sleepover-science-cam...
 
Title Images of Microbiology 
Description A booklet containing a series of images taken by scientists based at the University of Dundee that highlight the microbes they work with. 
Type Of Art Artwork 
Year Produced 2021 
Impact The images in the collection are part of a physical exhibition located at the Dundee Science Centre. 
URL https://discovery.dundee.ac.uk/ws/portalfiles/portal/58788913/23109_Microbe_Picture_Book_Accessible_...
 
Title Interactive Biofilm Ontology Map 
Description We have devoted time across our industrial and academic communities to understand the language and terminology of biofilms, and this has been captured as an ontology on the MindManager platform. This was developed in consultation with 80 UK researchers (in industry and research institutions/universities) to document how they talk about and describe biofilm research, problems and opportunities. 
Type Of Art Artefact (including digital) 
Year Produced 2019 
Impact Reference document to guide discussions on biofilm research, problems and opportunities. 
URL https://www.biofilms.ac.uk/biofilm-ontology/
 
Title International Biofilm Markets Infographics 
Description In the summer of 2020, we commissioned an independent study on international biofilm markets to further understand the economic significance of biofilms in the UK and globally. The study estimated expenditure associated with biofilms in 2019; information is not yet generally available for 2020 to quantify the impact of the COVID-19 pandemic. Biofilms are ubiquitous but particularly prominent in some sectors of the economy. These sectors form the focus of this study. We have used publicly available evidence to quantify economic activity relating to biofilms. The study assessed the focus industrial sectors of the National Biofilms Innovation Centre. The total economic impact was estimated to be almost $4,000bn globally and £45bn ($62Bn) in the UK. These are likely to be under-estimates of the impact of biofilms. For example, in healthcare whilst we identified $387bn of direct costs as a consequence of biofilms (5% of global healthcare expenditure). we know that prevention of infection (strongly linked to biofilm control) is a major goal of all healthcare procedures and so impacts significantly on the world's $7,800bn health related activity. We conservatively estimate the true total economic significance of biofilms is likely to be in excess of $5,000bn. We've created infographics to reflect the results of this study and show the huge impact biofilms have on our global economy. 
Type Of Art Artwork 
Year Produced 2021 
Impact These highlight key facts and statistics relating to 6 international biofilm markets - personal care, human health, food processing, marine biofouling, oral care and homecare. 
URL https://www.biofilms.ac.uk/international-biofilm-markets/
 
Title MicroBattle (µB): Microbiology themed card game 
Description MicroBattle Project was funded by the National Biofilms Innovation Centre (NBIC) Public Engagement Grant 2020-2021. MicroBattle (µB): Microbiology themed card game. 
Type Of Art Artistic/Creative Exhibition 
Year Produced 2021 
Impact Resources for members of the public to gain understanding of biofilms. 
URL https://www.biofilms.ac.uk/microbattle-card-game/
 
Title Microbe Zone (Nicola Stanley-Wall) 
Description A physical exhibition, the microbe zone, located at Dundee Science Centre features images of microbes. Scientists at the University of Dundee alongside some collaborators at other Scottish Institutions contributed images of microbes that highlight their research. Short descriptions accompany the images to allow the reader to explore the wonderful world of microbiology. An associated 'Images of microbiology' booklet and activity book have been created. 
Type Of Art Artistic/Creative Exhibition 
Year Produced 2021 
Impact New publications and new recognition of research using microbiology. 
 
Title Mighty Microbe 
Description A video of NBIC partner Katherine Fish, a Civil Engineer at the University of Sheffield talking about how she works with microbes, and describing how to make a Mighty Microbe toy. This video was made for the Maker{Future}'s 'Think Like An Engineer' initiative, funded by the Royal Academy of Engineering. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.youtube.com/watch?v=4B9_6PWA8io
 
Title Molecular Microbe-Host Interactions, with Shi-qi An from the University of Southampton. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/microbe-host-interactions/
 
Title Physics x Art 
Description Art exhibition featuring work created by student artists and inspired by physics research. The exhibition featured a gallery opening with over 70 attendees from various different backgrounds (Arts, Edinburgh public, Phyiscs). The exhibition was open from Friday, 14 October - Tuesday, 18 October which included a wider audience of passers-by, art students, College of Science and Engineering students, Edinburgh public. It also included outreach activities ('Build your own Biofilm). Featured art and sculptures related to biofilms (along with other projects). NBIC Collaborators: Jean-Christophe Denis; Cait MacPhee. 
Type Of Art Artistic/Creative Exhibition 
Year Produced 2022 
Impact Closer cooperation with Edinburgh College of Arts. Art will be displayed in a new building of the University of Edinburgh, The Nucleus, during its official opening by Princess Anne and viewable pubilcally then. 
 
Title Raman Against Respiratory Infection, with Callum Highmore from the University of Southampton. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/raman-respiratory-infection/
 
Title Safeguarding Water Quality for the Future, with Katherine Fish from the University of Sheffield. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/water-quality/
 
Title Scales of Resistance video (Morgan Alexander) 
Description A short video presentation providing educational information regarding the issue of antibiotic resistance and the need to take effective action in the future. 
Type Of Art Film/Video/Animation 
Year Produced 2019 
Impact Used as part of the Royal Society Summer Science Online programme promoting science to the general public. Morgan Alexander. 
URL https://cfvod.kaltura.com/p/1355621/sp/135562100/thumbnail/entry_id/1_y72nz7d1/version/100001/width/...
 
Title Science Ceilidh 
Description Science Ceilidh-biofilms formation, shows how microbiomes formed into biofioms. 
Type Of Art Performance (Music, Dance, Drama, etc) 
Year Produced 2018 
Impact It allows participants and viewers to have a more direct understanding of biofilms formation and how they are different from normal individual microbiomes, and how physics might be able to tackle the issue. 
URL http://www.scienceceilidh.com/physics
 
Title Science For All Takes Many Hands (Nicola Stanley-Wall) 
Description A common factor of many public engagement encounters is that they would not be possible without contributions from many people with diverse roles and skills. If we take the signature outreach event of the Division of Molecular Microbiology Magnificent Microbes as an example, there are 25 different groups of people involved to allow this long-standing public engagement event to achieve its goals. Illustrator Daisy MacGowan created Science For All Takes Many Hands which highlights and celebrates the breadth of the contributions from across the University of Dundee and beyond. These roles come from estate and buildings, health and safety, finance, contracts, research finance, research innovation services, cleaning services, and many more. Look at the illustration to explore the roles in more depth. It is important that we all recognise that public engagement by researchers is the result of teamwork and the collective effort is what allows success. 
Type Of Art Artwork 
Year Produced 2020 
Impact Stimulate change in scientist and public perception. The recognition that many people in divergent roles have valuable contributions to science outreach. Nicola Stanley-Wall 
URL https://discovery.dundee.ac.uk/en/publications/science-for-all-takes-many-hands
 
Title Sculptures (4) 
Description 3d Print and Resin Sculpture series (earth, europa, space, mars) of imagined biofilms - artist: Catriona Clark Collaboration: Jean-Christophe Denis; Cait MacPhee 
Type Of Art Artwork 
Year Produced 2022 
Impact Sculptures were included in an exhibition in October 2022 and will be included in an exhibition at the University of Edinburgh in 2023, at the opening of a new building, which will be officially opened by Princess Anne. 
 
Title Super biomaterials to fight superbugs (Morgan Alexander) 
Description A short animated video showing how Nottingham University are trying to find novel surface coatings that prevent superbugs sticking and building slime city communities called biofilms. 
Type Of Art Film/Video/Animation 
Year Produced 2019 
Impact Used as part of the Royal Society Summer Science Online programme promoting science to the general public. Morgan Alexander. 
URL https://cfvod.kaltura.com/p/1355621/sp/135562100/thumbnail/entry_id/1_00ytd3sg/version/100001/width/...
 
Title University of Edinburgh Biofilm Innovation website 
Description A website from the University of Edinburgh which showcases the important biofilm research taking place across the institution. The site also includes a number of educational and outreach resources available for download. 
Type Of Art Artistic/Creative Exhibition 
Year Produced 2021 
Impact A website from the University of Edinburgh which showcases the important biofilm research taking place across the institution. 
URL https://www.ed.ac.uk/edinburgh-biofilms-innovation
 
Title Unruly Objects 
Description Exhibition at Victoria and Albert Museum 24-25 September 2022 presenting the work completed during an NBIC funded public engagement and outreach project. Discover how BioArt can help mitigate climate change and join the drop-in lab to create your own tiny marble sculpture painted with 'living latex'. 
Type Of Art Artistic/Creative Exhibition 
Year Produced 2022 
Impact Unruly Objects explores ways of capturing carbon using cyanobacteria encapsulated into a kind of 'living latex' to mitigate climate change. It also investigates the possibility of conserving antiquities through the enhancement of their microbiomes, the place of BioArt within museums, and the use of blockchain technologies to store conservation data. Project developed by Anna Dumitriu in collaboration with Simone Krings, Dr. Suzie Hingley-Wilson and Professor Joseph Keddie from the University of Surrey. Join the Unruly Objects Lab to create your own tiny marble 'unruly objects' painted with 'living latex' and keep your tiny sculpture or leave it with us to become part of a new BioArt work. Activity open to adults and children (5+ years) accompanied with an adult. 
URL https://www.vam.ac.uk/event/4KODrMy2bB/unruly-objects
 
Title Using AI to Detect Bacteria in Wastewater, with Gavin Melaugh, from the University of Edinburgh. 
Description Video explaining biofilm research and societal impact. 
Type Of Art Artefact (including digital) 
Year Produced 2021 
Impact Public engagement. 
URL https://www.biofilms.ac.uk/using-ai-to-detect-bacteria/
 
Title Why Should I brush my teeth? 
Description Activity with the aim to Introduce biofilms in the context of teeth hygiene. Works well for attracting people at a stall, as very noticeable setup and intriguing. 
Type Of Art Artistic/Creative Exhibition 
Year Produced 2020 
Impact Used for public engagement. 
 
Description NBIC has created a pioneering and truly national centre with international reach. We have adopted an inclusive approach that has brought together the original four lead Universities (Edinburgh, Liverpool, Nottingham and Southampton), and a partnership that has expanded to include 59 associate research institutions (RIs), and support from a growing base of >150 small, medium and large companies. This has brought the UK an unprecedented set of capabilities, connectedness and exploratory power that has allowed us to be a crucible and catalyst for innovation and to achieve impact on a global stage. NBIC has created a global brand, linked to the world's leading biofilm RIs. We have signed Memoranda of Understanding (MOU) with four of these centres and are well connected with others. NBIC is proud to be recognised internationally for its innovation and leadership role in biofilms through international webinars and landmark work on defining the global research and commercial opportunity. Our impact is evidenced by our company interactions and partnering, our portfolio of 80 Proof of Concept (POC) projects, 34 Flexible Talent Mobility Awards (FTMA), and collaborative partnership awards with the USA, Singapore and Argentina. NBIC is also educating the next generation of researchers and entrepreneurs and driving the UK engine to influence the policy and research agenda for biofilms. Only via the creation of NBIC has this national connectivity and global impact been realised, hence advancing the BBSRC Biofilm strategy.
Exploitation Route NBIC will build on its collective strengths as the UK's national centre to drive and expand its global leadership at the
international forefront of research, training and innovation in biofilm technologies, addressing the grand challenges
important to the UK's future prosperity.
We will work with our partnership of 63 research institutions and >150 companies, established under Phase 1, and
transition to an approach that develops deeper and more strategic collaborations, focused and co-opted teams, and jointindustry
programs to address strategic priorities and deliver on shared sectoral roadmaps.
Key overall objectives that will be addressed during Phase 2 will be to:
- Tackle the biggest open research and innovation questions in the field and deliver global leadership, cross-cutting
enabling platforms and breakthrough science and innovation to Prevent, Detect, Manage and Engineer (PDME) biofilms.
- Drive the adoption of flexible, interdisciplinary solutions across industry sectors, addressing societal and economic grand
challenges, including climate change, NetZero, food and water safety and security, and healthcare. We will establish the
Joint Industry Programs addressing pre-competitive research to progress agreed roadmaps.
- Enter into active partnerships with government and policy makers to deliver step-changes in standards and regulations for
novel biofilm solutions. We will deliver model biofilms, analytical methods and recommendations within 3 years and support
industry-government discussions on regulation through providing a strong evidence base to underpin policy. We will
develop new international standards and test protocols driving growth and trade in biofilm products and technologies by
Year 5.
- Deliver a roadmap for new biofilm biobanking resources and infrastructure, which have been identified by our community
as critical to underpin basic science programmes as well as accelerate product development and commercialization.
- Provide global leadership via enhanced interactions with established centres in Singapore, US and the EU, while
nucleating new relationships and networks with countries with rapidly expanding economic and healthcare challenges.
- Train the next generation of thought leaders and entrepreneurs by delivering a co-created programme of training that
addresses key skills gaps identified by our industrial and academic communities.
- Accelerate the translation of knowledge-rich solutions to industry and the market via academic-industry collaborations,
and then driving innovation and growth via close engagement with regional partners, thus contributing to the 'levelling-up'
agenda. Companies that we work with will use the outputs of our work to launch new products, processes and services.
Together with our partners we will maximise the commercial impact of world-class knowledge developed by our research
and industry base to deliver economic and societal impact for the UK.
Sectors Aerospace, Defence and Marine,Agriculture, Food and Drink,Digital/Communication/Information Technologies (including Software),Education,Energy,Environment,Healthcare,Government, Democracy and Justice,Manufacturing, including Industrial Biotechology,Culture, Heritage, Museums and Collections,Pharmaceuticals and Medical Biotechnology,Transport

URL http://www.biofilms.ac.uk
 
Description The vision for the National Biofilms Innovation Centre is to create a fusion of world-class research and industry to deliver breakthrough technologies in the control and exploitation of biofilms. By harnessing our interdisciplinary expertise and infrastructure across the UK, we will create the next generation of researchers and entrepreneurs to deliver growth and wealth creation. We are creating a pioneering and truly national centre, with an inclusive strategy that has brought together the original four lead Universities, a partnership that has expanded to include 63 associate research organisations, and support from a growing base of >200 small, medium and large companies. This brings an unprecedented set of capabilities, connectedness and exploratory power that carries a huge potential for innovation that will allow us to lead on a global stage. NBIC is creating a global brand, intimately linked with the world's leading biofilm research institutions. We have signed a Memoranda of Understanding (MOU) with three of these centres. NBIC aims to be recognised internationally for its innovation and collaborative research in biofilms. Our early impact is evidenced by our company interactions, partnering, our portfolio of 81 Proof of Concept (POC) projects, and workshops. We are also educating the next generation of researchers and entrepreneurs and starting to drive the policy and research agenda for biofilms in the UK. Our vision for advancing biofilm research and skills training builds on the strategic themes of Prevention, Detection, Managing and Engineering of biofilms. Together with our academic and industry partners, we are working to define the key global challenges and scientific priorities within these themes, and we will continue to refine and develop our objectives according to industry needs. We have built a UK-wide cohort of Interdisciplinary Research Fellows (IRFs) to deliver on these scientific priorities. Key challenges defined within these themes include: In Prevention we aim to design a new generation of surfaces and materials to prevent microbial adhesion and/or biofilm formation; in Detection to deliver a step change in the ability to detect biofilms directly, in-situ and at the point-of-use in field-based contexts and in close-to-patient care; in Manage to accelerate the development of successful treatments, which target the biofilm life cycle-dynamics; and in Engineer to harness the benefits of complex microbial consortia from knowledge of their composition, function, ecology and evolution. Our vision is for NBIC to be the natural route for organisations to target their open innovation activity related to biofilm management or exploitation across the UK. We are connecting experts, simplifying knowledge transfer and catalysing collaboration to address key issues on biofilm prevention, detection, management and engineering. Working with industry, NBIC is already starting to produce sector roadmaps, identify the unmet needs of the sectors, and the key scientific, commercial, technical and regulatory barriers to meet them. The roadmaps will provide clear direction to evolve the NBIC science strategy over time. Our vision is that the research institutions in NBIC will create and share the national infrastructure that UK industry needs and that NBIC will collaborate with companies across a wide range of sectors under a permissive IP framework that anchors IP within the team that creates it, and rewards increasing commitment from companies. We have built this approach to IP into our contracts for our POC calls. Through site visits and discussions, we are building an understanding of the capabilities of all our partner research institutions to be able to capture current infrastructure and begin to identify gaps. A key part of our vision is to transform the research and entrepreneurial capability across the UK in the biofilm community through our IRFs, Doctoral Network and entrepreneurial training, addressing the skills gap in multidisciplinarity, entrepreneurship, responsible innovation, regulatory knowledge and leadership identified across the multi-sectorial biofilm field. The NBIC vision is one we have shared widely through our face-to-face contact with researchers, engagement with companies, our communications, consultations, workshops and social media. Our wider vision has been refined in response to the views of the wider community and through input from our Advisory Groups. A clear measure of the community support we have for this vision is the active and firm support from the UK Research and industrial base via their direct engagement in our work.
First Year Of Impact 2017
Sector Aerospace, Defence and Marine,Agriculture, Food and Drink,Chemicals,Communities and Social Services/Policy,Construction,Education,Energy,Environment,Healthcare,Manufacturing, including Industrial Biotechology,Pharmaceuticals and Medical Biotechnology,Transport
Impact Types Societal,Economic,Policy & public services

 
Description Active participation in the International Biofilm Standards Task Group (Paulina Rakowska)
Geographic Reach Multiple continents/international 
Policy Influence Type Membership of a guideline committee
URL https://www.biofilms.ac.uk/international-standards-task-group/
 
Description Approaches to Biofilm-associated Infections: Evaluating Gaps in Standardized Methods for Clinical Applications. Credits for continuing education webinar. (Paul Stoodley)
Geographic Reach North America 
Policy Influence Type Influenced training of practitioners or researchers
URL https://education.healthtrustpg.com/calendar/2454/2020-06-21/
 
Description Attendance at policy / strategy meeting with BBSRC to influence and contribute to the Microbiome Research Strategy (Mark Richardson) (Jan - Mar 2020)
Geographic Reach National 
Policy Influence Type Participation in a guidance/advisory committee
Impact Attendance at policy / strategy meeting with BBSRC to influence and contribute to the Microbiome Research Strategy.
 
Description BBSRC Microbiome Research Strategy (Jeremy Webb) (Jan - Mar 2020)
Geographic Reach National 
Policy Influence Type Participation in a guidance/advisory committee
Impact Attendance at policy / strategy meeting with BBSRC to influence and contribute to the Microbiome Research Strategy.
 
Description Board Member, Audit and Risk committee and EPSRC Value for Money committee, Rosalind Franklin Institute (Peter Smith)
Geographic Reach Local/Municipal/Regional 
Policy Influence Type Membership of a guideline committee
Impact Formation of a new national research institute working at the interface of life sciences and engineering.
 
Description Citation in a clinically-focused review (Dario Carugo)
Geographic Reach Multiple continents/international 
Policy Influence Type Citation in clinical reviews
URL https://turkishjournalofurology.com/en/problems-and-solutions-of-stent-biofilm-and-encrustations-a-r...
 
Description Co-supervise a PhD candidate (Peng Bao)
Geographic Reach Local/Municipal/Regional 
Policy Influence Type Influenced training of practitioners or researchers
Impact Kyle has trained for the use of multiple instruments. He has gone to Bruker (Berlin) for an on-site training on BioAFM. Kyle has progressed well with his PhD study and he has built a solid research plan.
 
Description Cosmetics Cluster UK Ltd (Katerina Steventon)
Geographic Reach National 
Policy Influence Type Influenced training of practitioners or researchers
Impact Via organising the joint webinar(s), NBIC enabled CCUK members to access new academic and industry expertise, and gain better understanding of market trends, claim substantiation and regulatory insights in the area of microbiome in personal care. The collaboration also informed CCUK about NBIC remit, initiatives and approach to innovation, to share this knowledge widely.
URL https://www.youtube.com/watch?v=js3SF_j2zlo
 
Description Cystic Fibrosis Syndicate in AMR (Mark Richardson)
Geographic Reach Multiple continents/international 
Policy Influence Type Contribution to a national consultation/review
Impact To address these challenges, the CF Syndicate in AMR will catalyse new research efforts and build capacity in the following areas: Streamline and enable access to clinically relevant samples for the preclinical screening and testing of CF antimicrobials Map and validate the preclinical screening and testing pathways to provide faster routes to bring CF antimicrobials to the clinic Develop guidance for industry on the key characteristics and requirements that CF antimicrobials should meet in order to address the needs and priorities of people with CF, through the development of Target Product Profiles.
URL https://md.catapult.org.uk/syndicates/cystic-fibrosis-syndicate-in-antimicrobial-resistance/
 
Description Cystic Fibrosis Syndicate on AMR with the Cystic Fibrosis Trust and Medicines Discovery Catapult Syndicate Steering committee (Miguel Camara)
Geographic Reach National 
Policy Influence Type Membership of a guideline committee
Impact We have designed a strategy to accelerate the discovery, commercialisation and implementation of novel therapeutic approaches for patients with cystic fibrosis. I am representing NBIC within this committee. We are working on the generation of strain biobanks for patients, Target Products Profiles for CF and drug discovery platforms which can be accessible to the general scientific and industrial community.
 
Description EPSRC Beyond Antibiotics International advisory board (Paul Stoodley)
Geographic Reach National 
Policy Influence Type Participation in a guidance/advisory committee
 
Description Formation of the International Biofilm Standards Task Group with our partners at CBE and SNBC (Jeremy Webb and Mark Richardson)
Geographic Reach Multiple continents/international 
Policy Influence Type Membership of a guideline committee
URL https://www.biofilms.ac.uk/international-standards-task-group/
 
Description IBRG (INTERNATIONAL BIODETERIORATION RESEARCH GROUP) Advisory Committee (Mark Richardson)
Geographic Reach National 
Policy Influence Type Participation in a guidance/advisory committee
Impact Membership of this group has allowed me alongside our IBSTG membership to demonstrate that NBIC is well engaged with the wider biofilm sector and allowed me to gain membership and chairmanship of a BSI technical advisory group.
URL https://www.ibrg.org/Default.aspx
 
Description Invited to UK-Singapore strategic talks representing global NBIC-SCELSE partnership. Government-to-Government discussions involving FCO, BEIS, Innovate UK, NRF (Jeremy Webb)
Geographic Reach Multiple continents/international 
Policy Influence Type Membership of a guideline committee
 
Description Involvement in the KTN Special interest group on the Microbiome across multiple sectors to aid in support of business progress and academic translation. (Mark Richardson)
Geographic Reach National 
Policy Influence Type Membership of a guideline committee
 
Description Joint Research Strategy Board, University of Southampton and University Hospital Southampton (Peter Smith)
Geographic Reach Local/Municipal/Regional 
Policy Influence Type Membership of a guideline committee
Impact Coordinating clinical, health and research activities across the University of Southampton and the University of Southampton foundation Trust.
 
Description KTN-NBIC Workshop on Biofilms and formal Report (Rasmita Raval)
Geographic Reach National 
Policy Influence Type Contribution to a national consultation/review
URL https://admin.ktn-uk.co.uk/app/uploads/2018/05/Biofilm-Workshop-Report-May2018.pdf
 
Description Local Enterprise Partnership Innovation South Strategic Regional Industrial Policy. (Peter Smith)
Geographic Reach Local/Municipal/Regional 
Policy Influence Type Participation in a guidance/advisory committee
 
Description MedTech Market Access (Peter Smith)
Geographic Reach Multiple continents/international 
Policy Influence Type Influenced training of practitioners or researchers
Impact Better informed start up and SME community on the processes and pitfalls of developing a Medtech product through to deployment.
 
Description Member of the Cystic Fibrosis Trust Strategic Implementation Board (Miguel Camara)
Geographic Reach National 
Policy Influence Type Influenced training of practitioners or researchers
Impact Being a member of this Board I have been involved in the selection of the awards for Strategic Research Centres which are key to develop new treatments for cystic fibrosis, influencing clinical guidelines and provide training for early career researchers.
 
Description Member of the International Advisory Council for Cluster for Pioneering Research (CPR) at RIKEN, Japan (Rasmita Raval)
Geographic Reach National 
Policy Influence Type Participation in a guidance/advisory committee
URL https://www.riken.jp/en/news_pubs/pubs/reports/cpr/index.html
 
Description Methodology - The methodology used in this project can provide a quick and accurate screening method for the generation of ROS within the TAED/H2O2 system. (Claudio Lourenco)
Geographic Reach Multiple continents/international 
Policy Influence Type Influenced training of practitioners or researchers
URL https://discovery.ucl.ac.uk/id/eprint/10112700/
 
Description Microbiome Innovation Network Steering Group (Mark Richardson)
Geographic Reach National 
Policy Influence Type Membership of a guideline committee
URL https://ktn-uk.org/agrifood/microbiome/
 
Description Participation in BSI CH/216/1 Standards meeting . Influencing Standards (Mark Richardson)
Geographic Reach Europe 
Policy Influence Type Membership of a guideline committee
Impact NBIC on behalf of IBSTG is now on the BSI committee for reviewing antiseptic / disinfectant testing standards . This feeds in CEN, We aim to try and influence the adoption of Biofilm relevant testing in these standards.
URL https://standardsdevelopment.bsigroup.com/committees/50081157
 
Description Participation in IBBS expert panel on standards and regulations (Mark Richardson)
Geographic Reach Multiple continents/international 
Policy Influence Type Membership of a guideline committee
Impact This was an international webinar expert panel discussing the need for innovation in standards and regulations in a range of fields and how this could be coordinated internationally. Follow up discussions are happening.
 
Description Participation with NIBSC and MHRA on standard setting (Mark Richardson)
Geographic Reach Europe 
Policy Influence Type Membership of a guideline committee
 
Description SCELSE Scientific Advisory Board
Geographic Reach Asia 
Policy Influence Type Participation in a guidance/advisory committee
 
Description SoCO BIO DTP (Mark Richardson)
Geographic Reach National 
Policy Influence Type Influenced training of practitioners or researchers
Impact Chairing Non Exec board of BBSRC funded DTP and able to influence the training of doctoral students.
URL https://southcoastbiosciencesdtp.ac.uk/
 
Description Society for Applied Microbiology Regulatory Standards (Jeremy Webb) (Dec 2019 - Mar 2020)
Geographic Reach National 
Policy Influence Type Participation in a guidance/advisory committee
Impact Meetings and discussions of the regulatory needs in the food environment with view to a workshop and coordinated policy of influence on regulatory standards .
 
Description Supervision of a third-year student on the course of Chem366 (Peng Bao)
Geographic Reach Local/Municipal/Regional 
Policy Influence Type Influenced training of practitioners or researchers
Impact Through this course, Hamza has gained basic experimental skills, knowledge of safety rules in the lab, a better understanding of the research environment, and experience in scientific report writing and public presentation.
 
Description The Biofilm - Associated Impact of Surgical Outcomes. Continuing credit course for medical practioners. (Paul Stoodley)
Geographic Reach Multiple continents/international 
Policy Influence Type Influenced training of practitioners or researchers
URL https://education.healthtrustpg.com/calendar/on-demand-the-biofilm-associated-impact-on-surgical-out...
 
Description The Environmental Biotechnology Network (EBNet) Steering Group (Will Green)
Geographic Reach National 
Policy Influence Type Participation in a guidance/advisory committee
URL https://ebnet.ac.uk/
 
Description UK MoD surface fleet hull management policy
Geographic Reach National 
Policy Influence Type Contribution to a national consultation/review
 
Description UK-Singapore Bio-Institute review panel. BEIS, Innovate UK proposal for A Bio-incubator partnership with UK. (Jeremy Webb)
Geographic Reach National 
Policy Influence Type Participation in a guidance/advisory committee
 
Description University of Southampton and University Hospital Southampton Foundation Trust COVID-19 Assessment Panel (Peter Smith)
Geographic Reach Local/Municipal/Regional 
Policy Influence Type Membership of a guideline committee
Impact Research and clinical assessment panel to fund and focus activities on the Covid-19 pandemic and possible interventions, or discouraging activity that would defocus the response.
 
Description Wessex Health Partners Working Group, Lead discovery (Peter Smith)
Geographic Reach Local/Municipal/Regional 
Policy Influence Type Membership of a guideline committee
Impact Coordination of Wessex biomedical discovery, translation and innovation across all Universities and NHS Hospital Trusts.
 
Description Wessex Regional Life Sciences Opportunities for Enterprise (Peter Smith)
Geographic Reach National 
Policy Influence Type Implementation circular/rapid advice/letter to e.g. Ministry of Health
 
Description iiCON Infection Innovation Consortium (Rasmita Raval)
Geographic Reach Local/Municipal/Regional 
Policy Influence Type Contribution to new or Improved professional practice
URL https://www.infectioninnovation.com/about/
 
Description A high-content screen for novel small molecules that inhibit antibiotic-resistant bacterial infection (Shi-Qi An)
Amount £20,000 (GBP)
Organisation Wessex Medical Research 
Sector Charity/Non Profit
Country United Kingdom
Start 01/2019 
End 09/2021
 
Description A joint workshop between the UK's National Biofilm Innovation Centre and the West African Centre for Cell Biology of Infectious Pathogens
Amount £10,000 (GBP)
Funding ID BB/W018497/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 07/2022 
End 06/2023
 
Description Antibiofilm Wound Dressings Designed to Prevent Infection and Minimize the Risk of Bacteraemia and Sepsis (Ronan McCarthy)
Amount £100,000 (GBP)
Funding ID SBF006\1040 
Organisation Academy of Medical Sciences (AMS) 
Sector Charity/Non Profit
Country United Kingdom
Start 09/2021 
End 08/2024
 
Description Assessment of Nanocin in UTI co-Biofilms (Isabelle Papandronicou)
Amount £12,000 (GBP)
Organisation University College London 
Sector Academic/University
Country United Kingdom
Start 02/2023 
End 04/2023
 
Description BBSRC Impact Acceleration Award via University of Warwick (PI) Mesoporous materials for antibiotic delivery into bacterial biofilm with industrial partner Brentapharm (Freya Harrison)
Amount £3,996 (GBP)
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 02/2022 
End 03/2022
 
Description BBSRC Impact acceleration award (University of Edinburgh, Gavin Melaugh, BBSRC IAA PIII089)
Amount £29,712 (GBP)
Funding ID BBSRC IAA PIII089 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 06/2021 
End 02/2022
 
Description Benchmarking different antibacterial technologies using an oral in vitro system (Jeremy Webb)
Amount £160,000 (GBP)
Organisation Unilever 
Sector Private
Country United Kingdom
Start 12/2017 
End 11/2019
 
Description Biofilm Resistant Liquid-like Solid Surfaces in Flow Situations
Amount £457,503 (GBP)
Funding ID EP/V049615/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 02/2022 
End 02/2025
 
Description Biofuel generation from CO2 by using microbial electrolysis system (Loughborough University, Eileen Yu)
Amount ¥100,000 (CNY)
Organisation Dalian National Laboratory for Clean Energy 
Sector Public
Country China
Start 01/2020 
End 12/2021
 
Description COLLABORATIVE TRAINING PARTNERSHIPS (CTP2)
Amount £7,025,368 (GBP)
Funding ID BB/W009374/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 10/2022 
 
Description DNA based super-resolution microscopy for bacterial cell surface nanoscale mapping
Amount £11,920 (GBP)
Funding ID IES\R2\222107 
Organisation The Royal Society 
Sector Charity/Non Profit
Country United Kingdom
Start 11/2022 
End 10/2024
 
Description Developing stochastic models of micro-plastic associated biofilm growth (Miguel Camara)
Amount £6,306 (GBP)
Organisation University of Cassino and Southern Lazio 
Sector Academic/University
Country Italy
Start 04/2019 
End 08/2019
 
Description Development and validation of biofilm model to establish the effect of chemical and physical treatments on cellular viability (Miguel Camara)
Amount £12,457 (GBP)
Organisation Melbec Microbiology Ltd 
Sector Private
Country United Kingdom
Start 02/2021 
End 01/2023
 
Description Development of a Moving Membrane Bioreactor (MMBR) for the Automated Cultivation and Harvest of Algae Grown as a Biofilm (Felix Ciceron)
Amount £135,333 (GBP)
Organisation Plymouth Marine Laboratory 
Sector Academic/University
Country United Kingdom
Start 06/2019 
End 08/2022
 
Description Development of outreach material for Nottingham NBIC outreach and public engagement (Miguel Camara)
Amount £2,000 (GBP)
Organisation University of Nottingham 
Sector Academic/University
Country United Kingdom
Start 12/2018 
End 04/2019
 
Description Development of outreach material for Nottingham NBIC outreach and public engagement - Nottingham University Institute of Policy and Engagement
Amount £2,000 (GBP)
Organisation University of Nottingham 
Sector Academic/University
Country United Kingdom
Start 12/2018 
End 04/2019
 
Description Development of rapid testing technology to increase food security (Callum Highmore)
Amount £249,905 (GBP)
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 10/2020 
End 06/2021
 
Description Development of synthetic biofilm for calibrating the effect of coatings on reducing marine viscoelastic drag. (University of Southampton, Paul Stoodley)
Amount £87,500 (GBP)
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 09/2019 
End 08/2022
 
Description Direct Industrial Funding (Robin Thorn)
Amount £200,000 (GBP)
Organisation Creo Medical Ltd 
Sector Private
Country United Kingdom
Start 02/2021 
End 02/2022
 
Description Does irrigating chronic wounds with a liquid acoustic stream (LAS) improve healing?
Amount £20,800 (GBP)
Organisation Southampton NIHR Biomedical Research Centre in Nutrition 
Sector Public
Country United Kingdom
Start 01/2020 
End 06/2021
 
Description EMBO BACNET21 Conference (Nicola Stanley-Wall)
Amount € 35,000 (EUR)
Organisation European Molecular Biology Organisation 
Sector Charity/Non Profit
Country Germany
Start 10/2021 
End 09/2022
 
Description EMBO Bacterial Networks conference grant
Amount £32,795 (GBP)
Funding ID w21/22 
Organisation European Molecular Biology Organisation 
Sector Charity/Non Profit
Country Germany
Start 07/2022 
End 12/2022
 
Description EMBO LONG TERM FELLOWSHIP (University of Dundee, Nicola Stanley-Wall, ALTF 471-2020)
Amount £185,189 (GBP)
Funding ID ALTF 471-2020 
Organisation European Molecular Biology Organisation 
Sector Charity/Non Profit
Country Germany
Start 07/2020 
End 06/2022
 
Description EPSRC DTP Early Career Researcher Competition, Understanding Microbiological Risks of Urban Flooding (University of Edinburgh, Isabel Doutelero)
Amount £80,000 (GBP)
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 10/2020 
End 05/2024
 
Description EPSRC IAA - Anti-Viral Surfaces and Materials
Amount £20,000 (GBP)
Organisation United Kingdom Research and Innovation 
Sector Public
Country United Kingdom
Start 04/2020 
End 10/2020
 
Description EPSRC Impact Acceleration Account (IAA) (Susana Direito 2022)
Amount £1,980,071 (GBP)
Funding ID EPSRC IAA PIV078 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 03/2022 
End 06/2022
 
Description EPSRC Impact Acceleration Account (IAA) Antimicrobial Contact Lens Cases (Raechelle D'Sa)
Amount £15,000 (GBP)
Funding ID EP/R511729/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 10/2018 
End 07/2019
 
Description EPSRC Impact Acceleration Account (IAA) Plasma activated aerosols for on-demand rapid sanitisation (Heather Allison)
Amount £14,678 (GBP)
Funding ID EPSRC IAA 2020 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 04/2020 
End 10/2020
 
Description EPSRC Impact Acceleration Account (University of Edinburgh, Susana Direito, EPSRC IAA PIII008)
Amount £16,615 (GBP)
Funding ID EPSRC IAA PIII008 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 04/2018 
End 09/2018
 
Description EPSRC Impact Acceleration Account - Anti-Viral Surfaces and Materials
Amount £20,000 (GBP)
Organisation United Kingdom Research and Innovation 
Sector Public
Country United Kingdom
Start 04/2020 
End 10/2020
 
Description EPSRC Impact Acceleration Account, Travel and Events Funding (University of Edinburgh, Susana Direito, EPSRC lAA Pll!063 Direito)
Amount £2,304 (GBP)
Funding ID EPSRC lAA Pll!063 Direito 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 07/2019 
End 11/2019
 
Description Establishment of Cryo-EM Screening Facility At University Of Dundee (Nicola Stanley-Wall)
Amount £1,000,000 (GBP)
Funding ID 223816/Z/21/Z 
Organisation Wellcome Trust 
Sector Charity/Non Profit
Country United Kingdom
Start 12/2021 
End 12/2026
 
Description Evaluation of a stabilised hypochlorous for decontamination of root canal surfaces (Heather Allison)
Amount £45,000 (GBP)
Organisation Dentosafe-T LTD 
Sector Private
Country United Kingdom
Start 09/2018 
End 01/2019
 
Description FELS Knowledge Exchange and Enterprise Funding Skin Health and Mental Health/Wellbeing: A Cross-Functional Workshop and Structured Industry Interviews (Katerina Steventon)
Amount £12,600 (GBP)
Organisation University of Southampton 
Sector Academic/University
Country United Kingdom
Start 03/2022 
End 07/2022
 
Description Formulated Materials for Infectious Disease Prevention
Amount £3,300,000 (GBP)
Organisation European Commission 
Department European Regional Development Fund (ERDF)
Sector Public
Country Belgium
Start 08/2020 
End 07/2023
 
Description Formulated Materials for Infectious Disease Prevention (Rasmita Raval)
Amount £3,300,000 (GBP)
Organisation European Commission 
Sector Public
Country European Union (EU)
Start 08/2020 
End 07/2023
 
Description Global Challenges Research Fund (GCRF) - Antimicrobial point of use water filtration in India (Raechelle D'Sa)
Amount £76,676 (GBP)
Organisation United Kingdom Research and Innovation 
Sector Public
Country United Kingdom
Start 04/2020 
End 06/2021
 
Description Global Challenges Research Fund (GCRF) - Point of use water filtration (Raechelle D'Sa)
Amount £20,000 (GBP)
Organisation United Kingdom Research and Innovation 
Sector Public
Country United Kingdom
Start 10/2018 
End 03/2019
 
Description ICURe Innovation to Commercialisation of University Research Cohort 40 biofilms sprint - Exploit Phase 2
Amount £11,958 (GBP)
Organisation University of Nottingham 
Sector Academic/University
Country United Kingdom
Start 10/2022 
End 03/2023
 
Description Impact Acceleration Award
Amount £19,928 (GBP)
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 02/2023 
End 07/2023
 
Description Impact Accelerator Account- PoC grant
Amount £74,484 (GBP)
Organisation University of Nottingham 
Sector Academic/University
Country United Kingdom
Start 01/2023 
End 12/2023
 
Description Infections in complex physical environments: Life and death in the sinuses (Bartlomiej Waclaw)
Amount £2,172,244 (GBP)
Funding ID EP/W023881/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 04/2022 
End 03/2025
 
Description Innovate UK (TS/P004512/1) (Rasmita Raval)
Amount £521,000 (GBP)
Funding ID TS/P004512/1 
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 03/2017 
End 02/2019
 
Description Innovate UK TS/P013716/1 (Rasmita Raval)
Amount £350,000 (GBP)
Funding ID TS/P013716/1 
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 04/2017 
End 09/2019
 
Description Innovate UK Temp Framework Aug 2020 - Anti-viral transparent adhesive protection for Touch Screens to help in the fight against COVID-19
Amount £224,011 (GBP)
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 12/2020 
End 08/2021
 
Description Lactam AMR Elucidating the Molecular Mechanisms of Action and Resistance of microbes to Unilever Anti-biofilm Lactam Technology
Amount £100,279 (GBP)
Funding ID BB/T509127/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 09/2019 
End 09/2023
 
Description MICRA Innovation Funding (Veeren Chauhan)
Amount £25,000 (GBP)
Organisation United Kingdom Research and Innovation 
Sector Public
Country United Kingdom
Start 01/2020 
End 06/2021
 
Description Modulating Skin Bacteria to Improve Wound Healing in the Elderly (Holly Wilkinson)
Amount £85,000 (GBP)
Funding ID 003/S/20 
Organisation British Skin Foundation 
Sector Charity/Non Profit
Country United Kingdom
Start 04/2022 
End 03/2025
 
Description Multifunctionalized Microalgae - A novel and flexible platform technology for maximising feed/energy conversion ratios and treating severe infections in livestock. (Michael Allen)
Amount £186,525 (GBP)
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 01/2019 
End 12/2021
 
Description Muscle resilience across the life course: from cells to society
Amount £184,485 (GBP)
Funding ID BB/W018284/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 02/2022 
End 01/2024
 
Description NBIC Eurobiofilms Marketing funding
Amount £6,000 (GBP)
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 09/2019 
 
Description NBIC Flexible Talent Mobility Account (FTMA)
Amount £275,000 (GBP)
Funding ID BB/S508020/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 11/2018 
End 02/2022
 
Description NIBB Summer Studentship Bursaries: Optimizing the operation of a novel photobioreactor (Mike Allen)
Amount £2,500 (GBP)
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 05/2021 
End 07/2021
 
Description NanoPrime (Veeren Chauhan )
Amount £500 (GBP)
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 02/2020 
End 06/2020
 
Description NanoPrime (Veeren Chauhan )
Amount £2,000 (GBP)
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 08/2019 
End 06/2020
 
Description NanoPrime Rapid (Veeren Chauhan)
Amount £5,000 (GBP)
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 02/2021 
End 08/2021
 
Description Nanoscale Characterisation of Biological and Bioinspired Materials using Integrated Fluidic Force - High-Resolution Confocal Microscopy
Amount £777,904 (GBP)
Funding ID BB/W019639/1 
Organisation University of Nottingham 
Sector Academic/University
Country United Kingdom
Start 08/2022 
End 07/2023
 
Description Nanoscale Characterisation of Biological and Bioinspired Materials using Integrated Fluidic Force - High-Resolution Confocal Microscopy
Amount £777,905 (GBP)
Funding ID BB/W019639/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 08/2022 
End 07/2023
 
Description National Biofilms Innovation Centre
Amount £12,801,513 (GBP)
Funding ID BB/R012415/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 12/2017 
End 11/2022
 
Description National Biofilms Innovation Centre
Amount £7,659,682 (GBP)
Funding ID BB/X002950/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 12/2022 
End 11/2027
 
Description National Biofilms Innovation Centre NBIC 2021 Flexible Talent Mobility Account
Amount £180,000 (GBP)
Funding ID BB/W510865/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 12/2021 
End 03/2022
 
Description New Testing methods for Oral care (Yuri Diaz Fernandez)
Amount £21,000 (GBP)
Organisation Unilever 
Sector Private
Country United Kingdom
Start 09/2019 
End 12/2024
 
Description Newcastle University Impact Acceleration Account - Feasibility test for large scale Microbial Electrolysis Cells (MEC) with bespoke control unit (Elizabeth Heidrich)
Amount £7,311 (GBP)
Organisation Newcastle University 
Sector Academic/University
Country United Kingdom
Start 01/2023 
End 04/2023
 
Description Nottingham DTP3
Amount £14,883,260 (GBP)
Funding ID BB/T008369/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 09/2020 
End 09/2028
 
Description Nottingham Research Fellowship (Veeren Chauhan )
Amount £300,000 (GBP)
Organisation University of Nottingham 
Sector Academic/University
Country United Kingdom
Start 10/2019 
End 09/2022
 
Description Novel Endolysin to Selectively Manage Antimicrobial Resistant S. aureus in Wound Biofilms
Amount £101,356 (GBP)
Funding ID CTP_22_0000000010 
Organisation National Biofilms Innovation Centre 
Sector Private
Start 01/2023 
End 01/2027
 
Description Novel Raman Spectroscopic Analysis for In Situ Detection of AMR in Cystic Fibrosis
Amount £15,000 (GBP)
Organisation Southampton NIHR Biomedical Research Centre in Nutrition 
Sector Public
Country United Kingdom
Start 01/2020 
End 10/2020
 
Description Partnership PhD (Robin Thorn)
Amount £227,700 (GBP)
Organisation Altered Carbon Ltd. 
Sector Private
Country United Kingdom
Start 10/2022 
End 10/2025
 
Description PhD Antibiotic resistance and biofilm formation in the WHO priority pathogen Acinetobacter baumannii (Ronan McCarthy)
Amount £84,048 (GBP)
Organisation Brunel University London 
Sector Academic/University
Country United Kingdom
Start 10/2021 
End 09/2025
 
Description PhD Developing ultrasound-responsive therapeutic agents for the treatment of chronic wounds (working title) (Dario Carugo)
Amount £90,000 (GBP)
Organisation University College London 
Sector Academic/University
Country United Kingdom
Start 10/2021 
End 10/2025
 
Description PhD Viscoelasticity and Associated-drag of Artificial and Natural Marine Fouling Biofilm (Jeremy Webb)
Amount £111,500 (GBP)
Organisation AkzoNobel 
Sector Private
Country Netherlands
Start 09/2019 
End 09/2022
 
Description Pilot screen of selected compounds versus common Gram-positive and Gram-negative bacteria (Miguel Camara)
Amount £11,689 (GBP)
Organisation Eurofarma 
Sector Private
Country Brazil
Start 04/2019 
End 07/2019
 
Description Plasma-activated antimicrobial hydrogel therapy (PAHT) for combatting infections in diabetic foot ulcers
Amount £369,080 (GBP)
Funding ID EP/V005839/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 02/2021 
End 01/2024
 
Description Product development award (PDA) scheme NIHR i4i: Can novel ureteric stents offer a better patient outcome compared to existing standard ureteric stents (CASSETTE)
Amount £1,375,896 (GBP)
Funding ID NIHR202935 
Organisation National Institute for Health Research 
Sector Public
Country United Kingdom
Start 02/2022 
End 01/2025
 
Description Proof of Concept application to the High Value Biorenewables Network (Eileen Yu)
Amount £50,000 (GBP)
Funding ID POC-HVB-2021/01 (YU) [University of York BBSRC High Value Biorenewables Network] 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 01/2022 
End 12/2022
 
Description Prophage host interactions: pulling back the curtains on Pseudomonas puppet masters (Heather Allison)
Amount £901,000 (GBP)
Funding ID BB/T015616/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 11/2020 
End 10/2023
 
Description Rapid characterisation and modelling of marine biofilm deformation for estimating biofouling frictional drag (Jinju Chen)
Amount £86,000 (GBP)
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 09/2022 
End 09/2026
 
Description Research Fellowship : Identification of novel antibiofilm compounds using high throughput approaches. (Miguel Camara)
Amount £63,749 (GBP)
Organisation Alfonso Martin Escudero Foundation 
Sector Charity/Non Profit
Country Spain
Start 01/2020 
End 07/2022
 
Description Research Fellowship : Role of signalling mechanisms in biofilms from uropathogenic E. coli (Miguel Camara)
Amount £107,999 (GBP)
Organisation Fundación Canaria de Investigación Sanitaria 
Sector Charity/Non Profit
Country Spain
Start 10/2019 
End 04/2021
 
Description Royal Society University Research Fellowship
Amount £1,119,000 (GBP)
Funding ID URF\R1\221795 
Organisation The Royal Society 
Sector Charity/Non Profit
Country United Kingdom
Start 10/2022 
End 09/2027
 
Description SUrfaCe Characteristics Enabled StrategieS against virus transmission (SUCCESS)
Amount £649,501 (GBP)
Funding ID EP/V029762/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 09/2020 
End 03/2022
 
Description Seeing the virus with topological optical microscopy
Amount £180,022 (GBP)
Funding ID BB/X003477/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 09/2022 
End 03/2024
 
Description Shape, shear, search & strife; mathematical models of bacteria
Amount £361,730 (GBP)
Funding ID EP/S033211/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 09/2020 
End 08/2023
 
Description South Coast Biosciences Doctoral Training Partnership (SoCoBio DTP)
Amount £10,099,355 (GBP)
Funding ID BB/T008768/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 09/2020 
End 09/2028
 
Description Southampton AMR Clinical Research Laboratory for Antimicrobial Resistance (AMR) Capital funding. (University of Southampton, Jeremy Webb, NIHR200638)
Amount £2,859,674 (GBP)
Funding ID NIHR200638 
Organisation National Institute for Health Research 
Sector Public
Country United Kingdom
Start 11/2019 
End 10/2021
 
Description Strategic Research Centre: An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF).
Amount £773,682 (GBP)
Funding ID SRC022 
Organisation Cystic Fibrosis Trust 
Sector Charity/Non Profit
Country United Kingdom
Start 04/2022 
End 03/2026
 
Description Strength in Places Fund: Delivering Integrated Solutions for Human Infections. (Rasmita Raval)
Amount £18,000,000 (GBP)
Organisation United Kingdom Research and Innovation 
Sector Public
Country United Kingdom
Start 09/2020 
End 08/2025
 
Description The State Key Laboratory Program: Understanding polybacterial interactions during rice disease (Shi-qi An)
Amount £11,000 (GBP)
Organisation Guangxi University 
Department State Key Lab for Conservation and Utilization of Subtropical Agro bioresource
Sector Academic/University
Country China
Start 12/2018 
End 12/2020
 
Description The Sustainable Innovation Fund: Optically enhanced antiviral transparent screen protection
Amount £235,709 (GBP)
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 10/2020 
End 06/2021
 
Description The Sustainable Innovation Fund: round 1 (temporary framework)
Amount £192,206 (GBP)
Funding ID 77477 
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 09/2020 
End 06/2021
 
Description The association of biofilms to water quality deterioration in Valencia (The University of Sheffield, Isabel Doutelero)
Amount € 21,000 (EUR)
Organisation Global Omnium 
Sector Private
Country Spain
Start 10/2019 
End 10/2020
 
Description Transformative Imaging for Quantitative Biology (TIQBio) Partnership
Amount £1,626,518 (GBP)
Funding ID EP/V038036/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 03/2022 
End 03/2027
 
Description Transforming industry standards in healthcare: Connecting key UK interdisciplinary analytical platforms for biofilms across the NBIC, NPL, SCELSE and SNBC (Paulina Rakowska)
Amount £200,000 (GBP)
Organisation Department for Business, Energy & Industrial Strategy 
Sector Public
Country United Kingdom
Start 01/2021 
End 03/2021
 
Description Treatment of recurrent bacterial vaginosis using engineered probiotic bacteria
Amount £612,881 (GBP)
Funding ID BMC 10035355 
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 01/2023 
End 02/2025
 
Description UKRI Ideas to address COVID-19 - Innovate UK Temp F'work Aug 2020 (University of Edinburgh, Rosalind Allen and Susana Direito, 83701)
Amount £519,283 (GBP)
Funding ID 83701 
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 12/2020 
End 02/2022
 
Description UKRI Interdisciplinary Centre for Circular Chemical Economy (Loughborough University, Eileen Yu)
Amount £4,436,401 (GBP)
Funding ID EP/V011863/1 
Organisation United Kingdom Research and Innovation 
Sector Public
Country United Kingdom
Start 01/2021 
End 12/2024
 
Description Understanding inter-kingdom and inter-microbial interactions in microbial and fungal communities - Nanoprime (University of Nottingham, Shaun Robertson)
Amount £14,880 (GBP)
Organisation University of Nottingham 
Sector Academic/University
Country United Kingdom
Start 11/2019 
 
Description Understanding interactions between microbes in polymicrobial communities via liquid extraction surface analysis (LESA) mass spectrometry - British Mass Spectrometry Society (University of Nottingham, Shaun Robertson)
Amount £4,160 (GBP)
Organisation British Mass Spectrometry Society 
Sector Charity/Non Profit
Country United Kingdom
Start 12/2019 
 
Description Understanding the impact on underwater cleaning on fouling control coatings (Jinju Chen)
Amount £104,900 (GBP)
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 09/2023 
End 09/2027
 
Description Understanding the molecular survival strategies of Acinetobacter baumannii and developing strategies to disable them.
Amount £451,305 (GBP)
Funding ID BB/V007823/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 04/2021 
End 03/2024
 
Description Unravelling the quorum sensing mechanisms in Azospirillum brasiliense Az39: one of the most used strains for agriculture in America (Miguel Camara)
Amount £12,000 (GBP)
Funding ID IEC\R2\181079 
Organisation The Royal Society 
Sector Charity/Non Profit
Country United Kingdom
Start 12/2018 
End 12/2021
 
Description Wellcome Prime Covid-19 Research Support (Shaun Robertson)
Amount £10,306 (GBP)
Organisation Wellcome Trust 
Sector Charity/Non Profit
Country United Kingdom
Start 09/2022 
End 12/2022
 
Description Wellcome Prime Scholarship (Veeren Chauhan)
Amount £5,000 (GBP)
Organisation Wellcome Trust 
Sector Charity/Non Profit
Country United Kingdom
Start 09/2021 
End 07/2022
 
Title A surface-confined liposome system for early-stage evaluation of new antimicrobial molecules (Peng Bao) 
Description Many antimicrobial molecules work by disrupting cell membranes. There have been a few well-established systems/protocols for evaluation of this mode of action at the early stage of technology development. In particular, there is a need for a fast and sensitive evaluation of such ability directly at a surface. Here, we developed an assay that allows fast screening of a wide range of antimicrobial agents. A fluorescent leakage assay employing surface-confined liposomes could provide a fast/sensitive platform for the evaluation of new antimicrobial molecules. The antimicrobial properties of UV-powered active molecules (provided by our partner at the University of Nottingham) were tested using a surface-confined liposome leakage assay in vitro. The leakage assay employed micro-sized DOPC/DOTAP (1:1) vesicles attached to the glass surface and checked under UV exposure from the LED light source on Zeiss Image2 fluorescence microscope. The mean time constants (averaged over many individual vesicles, n>20) were found to be distinctly different for samples with and without molecules, directly demonstrating the disruptive effect of molecules on lipid membranes. 
Type Of Material Technology assay or reagent 
Year Produced 2022 
Provided To Others? No  
Impact The surface-confined liposome system provides an easy, fast, and sensitive way for the early-stage evaluation of the potential of new active molecules for antimicrobial applications. It could find wide applications in drug screening. 
 
Title Automated in-situ biofilm imaging and mechanical characterisation (Jinju Chen) 
Description We developed a uniquely designed automated in-situ testing rig to detect and monitor of marine biofilm erosion and study marine biofilm mechanical properties at meter scale. 
Type Of Material Improvements to research infrastructure 
Year Produced 2020 
Provided To Others? No  
Impact This technique enabled the new partnership with International Paint (AkzoNobel). We are in the process of applying the patent. 
 
Title Developed casting methods for creating elastomeric replicas of rigid structured surfaces with micron-level accuracy (Paul Stoodley) 
Description The research tool is a pipeline from casting real surface roughness from materials, including marine fouled surfaces, and creating materials with replicated patters and roughness with defined viscoelastic parameters in able to assess the relative influence of material viscoelasticity and roughness on marine drag. 
Type Of Material Technology assay or reagent 
Year Produced 2020 
Provided To Others? No  
Impact The data generated are currently being prepared for a manuscript and will serve as a PhD thesis chapter. 
 
Title Endoscope biofilm model. (Robin Thorn) 
Description UWE developed an Endoscope Biofilm Model, comprising of a re-circulating perfusion system with a known microbial load through a surrogate endoscope operating channel (PTFE tubing). The biofilm densities of the test bacterial species were determined following 72 hours of culture within the EBM. Viable biofilms were recovered from the EBM for all four bacterial species tested; P. aeruginosa, S. aureus, K. pneumonia and E. coli, whereby the results demonstrated the growth of reproducible biofilms. 
Type Of Material Technology assay or reagent 
Year Produced 2020 
Provided To Others? No  
Impact The development of this model has led to the successful demonstrated pf the efficacy of a Creo Medical Ltd. developed endoscope disinfection system for the treatment of bacterial biofilms within the internal lumen of PTFE tubing as a surrogate for medical endoscope operating channels. The success of this approach has led to successful follow-on funding directly from Creo Medical Ltd. 
 
Title Ex vivo lung model - optimised / UKAS-accredited implementation (Freya Harrison) 
Description In line with the aims of the grant, we have optimised and shared our ex vivo lung model. The current grant has allowed significant improvements and flexible re-optimisation of the model to make it more useful and tractable for colleagues, especially those in industry. We have successfully trained scientists from Perfectus Biomed Ltd. in the use of the model and helped them gain UKAS accreditation for its use in preclinical testing of antibiofilm agents. We have also published and open-access protocol for use of the model in antibiotic susceptibility testing (JoVE, video protocol to follow - delayed by COVID-19 restrictions). Please also refer to other sections of the ResearchFish submission for details of ongoing use and uptake, and the dedicated website at https://warwick.ac.uk/fac/sci/lifesci/people/fharrison/exvivolung. 
Type Of Material Technology assay or reagent 
Year Produced 2020 
Provided To Others? Yes  
Impact Accreditation of the model and Standard EN 1276 to ISO 17025 by our industrial collaborator Perfectus Biomed Ltd. for biocide testing on biofilms of P. aeruginosa. Now beiing used by Perfectus Biomoed Ltd. to test candidate antibiofilm agents for industrial clients. See https://perfectusbiomed.com/perfectus-biomed-elevate-method-testing-beyond-the-standard/ We have also published an open-access protocol for use of the model in antibiotic susceptibility testing for P. aeruginosa and S. aureus in JoVE (see Publications). We will continually monitor uptake of the model through the lifetime of the grant and beyond, an in particular record any concomitant reduction in animal usage by users of the model, and report on this at a later stage. 
URL https://www.jove.com/t/62187/antibiotic-efficacy-testing-an-ex-vivo-model-pseudomonas-aeruginosa
 
Title Fabrication of novel antimicrobial membrane to remove biofilm in female reproductive system (Farshid Sefat) 
Description In this research a group of scaffolds encapsulated and fabricated with a antibacterial drug and tested biologically. This scaffold remove biofilm in female reproductive system by a novel method. 
Type Of Material Biological samples 
Year Produced 2021 
Provided To Others? No  
Impact This is an ongoing experimental work and we are predicting the outcome will have significant impact on many patients who suffering from bacterial within females reproductive system. 
 
Title Image analysis protocol for quantifying surface structural deformation under hydrodynamic shear. (Paul Stoodley) 
Description Developed image analysis protocol for quantifying surface structural deformation under hydrodynamic shear from cross sectional optical coherence tomography images of the elastomeric replica surfaces. 
Type Of Material Technology assay or reagent 
Year Produced 2020 
Provided To Others? No  
Impact These data will be used in a peer reviewed manuscript and as a PhD chapter. 
 
Title Improvement of self referencing method for recording and mapping both ion and molecular activity and flux from single cells, tissues and biofilms (Peter J. Smith) 
Description Further development of the self referencing electrochemical method for detection of chemical activity or flux from living systems with high temporal and spatial fidelity. Previous a bespoke system the design brings in commercially available equipment, modified for function, and delivering higher sensitivity, control, analytics and versatility. Parllel and ongoing evolution of the solid state ultra micro sensor designs provide a more robust base for distributing the technology. 
Type Of Material Technology assay or reagent 
Year Produced 2020 
Provided To Others? Yes  
Impact Van Mooy, B.A.S., Hmelo, L.R., Fredricks, H.F., Ossolinski, J.E., Pedlera, B.E., Bogorff D.J. and Smith P.J.S. (2014) Quantitative exploration of the contribution of settlement, growth, dispersal and grazing to the accumulation of natural marine biofilms on antifouling and fouling-release coatings. Biofouling 30(2):223-236. DOI: 10.1080/08927014.2013.861422. Alavian, KN, Collis, L, Li, H, Bonanni, L, Zeng, L, Sacchetti, S, Lazrove, E, Nabili, P, Flaherty, B, Graham, M, Chen, Y, Messerli, S, Mariggio, MM, Rahner, C, McNay, E, Shore, G, Smith, PJS, Hardwick, JM and Jonas, EA 2011 Bcl-xL regulates metabolic efficiency of neurons through interaction with the mitochondrial F1FO ATP synthase. Nature Cell Biol. 13, 1224-1233 doi:10.1038/ncb2330. 
URL https://www.tandfonline.com/doi/full/10.1080/08927014.2013.861422
 
Title Method to measure natural marine biofilm accumulation on artifical surfaces (Karen Tait) 
Description During this project we have made adaptions to established epifluorescence microscopy methods to allow us to measure natural microbial biofilm accumulation on artificial surfaces that have been exposed to untreated natural seawater. We have used epifluorescence techniques combined with image analysis to increase through-put and quality control associated with data capture from multiple images. This revised method will form the basis of a commercial biofilm quantification service and as such is commercially sensitive. 
Type Of Material Technology assay or reagent 
Year Produced 2020 
Provided To Others? No  
Impact We anticipate that this method will form the basis of a commercial biofilm quantification service for PML. 
 
Title Microfluidic-based models to screen formation of crystalline biofilms in urological devices (Dario Carugo) 
Description Microfluidic devices (referred to as stent-on-a-chip, SoC) were designed to replicate key flow dynamic features of a stented ureter in the presence of different types of ureteral obstruction. Dimensions mimic those of commercially available double-J stents. A replica moulding technique was employed in order to manufacture SoC devices, which employed 3D printed polylactic acid (PLA) master moulds. Devices can replicate the architecture of different urological stents and patient-specific urinary tracts. They have been employed as an in-vitro model to iterate different urological stent designs and assess whether specific device geometries could minimise deposition of bacteria over the device surface. 
Type Of Material Model of mechanisms or symptoms - in vitro 
Year Produced 2018 
Provided To Others? Yes  
Impact Novel ureteric stent designs have been developed, which have been proven to reduce particle deposition in-vitro. See following publications and patents: (1) Particle Accumulation in Ureteral Stents Is Governed by Fluid Dynamics: In Vitro Study Using a Stent-on-Chip Model (2) Reducing deposition of encrustation in ureteric stents by changing the stent architecture: A microfluidic-based investigation (3) A Microfluidic-Based Investigation of Bacterial Attachment in Ureteral Stents (* directly linked to this award) (4) Stent With Streamlined Side Holes 
URL https://www.mdpi.com/2072-666X/11/4/408/htm
 
Title Model reactor and culture system for biofilm metrology studies. 
Description We have developed a CDC reactor model system for Pseudomonas aeruginosa culture in order to carry out studies of biofilm reproducibility in partnership with LGC. 
Type Of Material Technology assay or reagent 
Year Produced 2022 
Provided To Others? No  
Impact Knowledge exchange and collaborative work in the area of biofilm metrology with industry partner LGC. 
 
Title Model system for the assessment of in-line ozone treatment in drinking water pipelines. 
Description Oxi-Tech have developed an in-line system for the delivery of ozone as a method to treat bacteria and biofilms within drinking water systems. We developed a recirculating water model system that incorporated an Oxi-cell and that was used to model water contamination by planktonic bacteria Escherichia coli, P. aeruginosa, and Legionella shakespearei. 
Type Of Material Technology assay or reagent 
Year Produced 2022 
Provided To Others? No  
Impact The Oxi-cell eradicated planktonic bacteria following 10 mins of activity. Biofilms of P. aeruginosa and L. shakespearei were grown for 48h and transferred to a model water system that contained 15m pipe between the Oxi-cell and the biofilms. Oxi-cell activity significantly reduced the percentage of live cells in L. shakespearei biofilms from 78% to 42%, and prevented the dispersal of live cells from the biofilms. These data together suggest that the Oxi-cell is effective at preventing dissemination and growth of bacterial biofilms within water systems, where it is unable to eradicate established biofilms. 
 
Title Optical imaging of wound dressings (Daimark Bennett) 
Description Development of an approach to visualise wound dressings and associated microbial biofilms using confocal microscopy. 
Type Of Material Technology assay or reagent 
Year Produced 2021 
Provided To Others? No  
Impact In preparation. 
 
Title Partial development of a novel testing rig (Karen Tait) 
Description This project has been severally impacted by Covid-19 and as such is still in its very early stages. We are in the early stages of developing a novel laboratory test rig to allow us to remotely quantify marine biofouling on a test panel. Due to the commercial interest in the project and IP agreements in place with our funders (National Biofilm Innovation Centre) it is not possible to disclose further information concerning the biofilm quantification techniques. 
Type Of Material Technology assay or reagent 
Year Produced 2020 
Provided To Others? No  
Impact None yet. 
 
Title Polymicrobial biofilm development 
Description This tool is a complex wound biofilm that can be used to assess inflammation and the effects of antimicrobials. 
Type Of Material Technology assay or reagent 
Year Produced 2022 
Provided To Others? Yes  
Impact Facilitated the methods to secure EPSRC grant 
URL https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8991182/
 
Title Porcine corneal explant cultures for antimicrobial drug development (Peter Monk) 
Description The corneum is a complex multi-layered tissue that is not easy to reproduce using cell lines. To avoid the use of living animals, we have developed an ex vivo model using the easily available by-product of the food industry. Infection with bacteria or fungi requires abrasion of the corneal epithelial layer, usually a requirement in vivo. Infection of the explants recapitulates infection in vivo, and appears similar to that seen in human corneal explants. 
Type Of Material Model of mechanisms or symptoms - in vitro 
Year Produced 2019 
Provided To Others? No  
Impact We will shortly be creating a video methods publication to allow other groups to use this method. 
 
Title Porcine skin explant model of infection using Staphylococcus aureus and Pseudomonas aeruginosa 
Description The skin explant model developed for this project a. allowed us to evaluate antimicrobial drug efficacy against biofilm infection. 
Type Of Material Technology assay or reagent 
Year Produced 2021 
Provided To Others? Yes  
Impact The model allowed us to assess Destiny Pharma's novel antimicrobial compound for efficacy against biofilm-associated infection - the compound was highly effective at killing biofilms formed by clinical S. aureus strains in the pig skin explant model. 
 
Title Rapid single-step fluorescence detection using aptamer beacon (Sourav Ghosh) 
Description The assay involves an aptamer beacon, which acts like a fluorescence switch. The aptamer fluorescence is turned off in its original state. In presence of the target species, the aptamer undergoes a change in configuration, which turns on the fluorescence. The change in intensity of fluorescence suggests quantitative detection of the target species. The method is application to a broad range of biomolecules (proteins, lipid, carbohydrates) and biological particles (fungus, spores, bacteria and virus). 
Type Of Material Technology assay or reagent 
Year Produced 2021 
Provided To Others? No  
Impact Success validation has led to clinical evaluation projects in point of care wound diagnosis (from wound swabs) and COVID-19 diagnosis from saliva. 
 
Title Reagents to monitor biofilm assays in vivo in C. elegans 
Description Reagents to monitor biofilm assays in vivo in C. elegans tested and validated. Work to improve reagents and methods ongoing in the lab. 
Type Of Material Technology assay or reagent 
Year Produced 2022 
Provided To Others? Yes  
Impact None yet but work is continued to achieve impact. 
 
Title Rotating Spiral Bioreactor (Jordan MacInnes) 
Description The prototype reactor developed in the project allows interaction between beds of microbial particles and media solutions in a controlled and therefore tractable manner. 
Type Of Material Improvements to research infrastructure 
Year Produced 2021 
Provided To Others? No  
Impact The device has already allowed precise investigation of reaction rates in microbial particle beds as a function of microbial type. The same will be true for catalytic particles of any kind. 
 
Title Standard method for growing simulated dental plaque biofilms for safety and efficacy testing using modifications of CDC and ASTM standard methods (Paul Stoodley) 
Description Biofilm communities grown from human saliva on hydroxyapatite coupons in the CDC reactor were identified through 16S sequencing and included the presence of key taxa including Firmicutes, Bacteroidetes, Actinobacteria, Proteobacteria and Fusobacteria which form the healthy core oral microbiome, including aerobes, anaerobes and unculturable species. Over an 8 day time course we observe changes to the composition of the microbiomes within the model bioreactor systems. To test this hypothesis, we utilized the commonly used antimicrobial compound chlorhexidine. Chlorhexidine was applied to bioreactor biofilms for 2 weeks resulting in significant differences in taxa composition compared to both the Control treatment and . These observations indicate that the model developed is a suitable tool for the investigation of the oral microbiome and may be valuable in determining the impact of active compounds and antimicrobial technologies on the oral microbiome, facilitating the improved development of oral healthcare products. A publication is in preparation. 
Type Of Material Technology assay or reagent 
Year Produced 2020 
Provided To Others? No  
Impact The method has potential for adoption by dental companies for testing dental hygiene products in vitro. 
 
Title Use of HS-AFM as a tool for biofilm monitoring (Michael Allen) 
Description High Speed Atomic Force Microscopy was successfully developed as a tool for assaying and analysing the structural features of biofilms. Various solid substrata which could be used in membrane bioreactors were assayed including isotactic polypropylene, polypropylene, polyethylene, polyamide and polystyrene. 
Type Of Material Technology assay or reagent 
Year Produced 2019 
Provided To Others? No  
Impact Following incubation in an aqueous environment, we could confirm and monitor biofilm formation with nanoscale resolution.Indeed, in addition to whole cellular observations ranging from larger microalgal diatom cells and bacteria, we could successfully observe what we believe to extracellular polysaccharide coating plastic surfaces. This was achieved in both air and liquid environments, the latter in particular raising the possibility of utilising this technique for non-destructive assessment of biofilm formation in the future. Independent software developments during the course of this project have allowed for the real time stitching of raster pattern generated images, providing SEM scale imagery, but delivering nanoscale resolution.Following the successful trial of the MMBR system, biofilms were monitored with the new SOP developed herein, providing HS-AFM data showing colonisation of the 'mesh' utilised. Interestingly, cells were observed to adhere to the surface elements of the individual membrane fibres, as well as being corralled in to the intervening spaces of the structure. Further work could determine the rate of colonisation and how repeated harvesting effects biofilm structure, function and integrity. 
 
Title Using H-NMR to detect the generation of Reactive Oxygen Species (Claudio Lourenco) 
Description This technique consists in the use of H-NMR to follow the reactions taking place within a complex formulation with particular emphasis in the generation of ROS. On its own the technique can effectively detect and quantify the elements present in the mixture. By fine tuning the pH of the environment the generation of ROS can be increased and its half-life in solution increased. 
Type Of Material Technology assay or reagent 
Year Produced 2017 
Provided To Others? Yes  
Impact The main impact is that it allows a quick screening and quantification of a complex mixture of ingredients within a solution. It can be extremely valuable to compare new formulations enabling the researcher to test the reactants efficacy in the early stages of product development saving costs and time on not so good formulations. 
 
Title Viability status: inability of viability kits to assess damage from ozone-treated Listeria monocytogenes (Nicola Holden) 
Description Qualitative assessment of Listeria monocytogenes (Lmo) viability in biofilms was made with Lmo biofilms stained with the commercial LIVE/DEAD BacLight kit and imaged by microscopy, mounted on polylysine-coated slides. Initially, an in vitro test was performed with a 1:1 mixture of Lmo killed with 70% isopropyl alcohol: live cells cultured in TSB, and it was possible to detect both live and dead cells at the proportions expected. Detailed examination of the slides using con-focal microscopy showed two distinct layers of Lmo cells. To investigate this phenomenon, the Lmo cells were co-stained with another nuclei acid stain DAPI, and a membrane stain (FM 1-43). There appeared to be two types of debris: one stained with SYTO9 and close to the coverslip and another stained with DAPI and close to the microscope slide. The DAPI-stained debris near the slide associated with the membrane dye (FM 1-43), suggesting that lipids that may have altered the density or adhesive properties of DAPI. It is possible that staining with SYTO9 may competitively prevent binding of DAPI, explaining why it wasn't uniform. Live/Dead staining was then performed on Lmo biofilms in situ on stainless steel (SS) discs, +/- ozone treatment. It appeared that the ozone-treatment had a minimal effect on cell viability since only a very low proportion of Lmo were stained with propidium iodide in comparison to untreated SS disc biofilms that contained a 'natural' population of dead cells. Therefore, the stains were validated in situ by treatment of Lmo on SS discs with 70 % isopropyl alcohol for 1 hour, which resulted in a high proportion of dead cells, as expected. However, treatment with 3 % hydrogen peroxide for 30 minutes only yielded a small proportion of dead cells. Yet, Lmo viable plate counts decreased by ~ 2 orders of magnitude after treatment with just 2000 ppm (0.2 %). Therefore, there was a large discrepancy in viability as reported by the Live/Dead staining kit for peroxide or ozone treatments compared to viability as assessed by CFU. It was apparent that the PI dye was not able to enter ozone/peroxide-treated cells. 
Type Of Material Physiological assessment or outcome measure 
Year Produced 2019 
Provided To Others? No  
Impact The main outcome is that we are now much better informed on whether commercial kits provide correct answers to quantify viable cells and we know that it is not possible to use this approach to assess viability of ozone or peroxide-treated biofilms. Although the kits work well for other physiological stresses that result in cell death / reduced viability, the one we tested (most commonly used) was unable to accurately quantify viability from ozone or H2O2 treated cells. This has implications for food safety risk assessments since reactive oxygen (in various forms) is used commercially as a bactericidal agent. Our data was accumulated from an experimental set-up that reflected Listeria contamination in food processing settings, i.e. at low temperature and allowing biofilm formation to occur on stainless steel surfaces. We show that if the commercial kits are used for quantification of viability, and hence to calculate the extent of die-off following treatment, they would not be accurate and could over-estimate the extent of kill / die-off. In turn, this would provide mis-leading information on the efficacy of the treatment in food safety settings. 
 
Title Workflow for genomic assessment of microbially influenced corrosion 
Description The team have developed expertise in field based DNA sequencing and the use of the Nanopore sequencing platform for energy sector samples. Furthermore, the secondment has facilitate the development of industry links, both in the UK and internationally through DNV GL's global research team. 
Type Of Material Technology assay or reagent 
Year Produced 2023 
Provided To Others? No  
Impact The FTMA application has allowed knowledge exchange between NBIC researchers and renewable energy industries and infrastructure that will be required for the energy transition. This has involved working with DNV who provide access to bacterial corrosion samples, and have assets such as wind farms and pipeline digs and are who are familiar with the industries standardisation processes. 
 
Title YouSeq The ONE 16S NGS kit 
Description Create a ready to sequence 16S Library in one closed tube reaction. The ONE 16S NGS kit contains all of the reagents necessary to create a ready-to-sequence NGS library in minutes. In a breakthrough kit format, the user simply performs one closed tube qPCR reaction. The variable regions V3/4 are targeted, amplified and adapters are added in a single reaction. The quantitative PCR read out simultaneously quantifies each library so they can be pooled precisely. Then a simple bead-clean completes the workflow. After sequencing, the data can then be loaded on to our cloud for rapid analysis. A detailed report is typically returned within 15 minutes. 
Type Of Material Technology assay or reagent 
Year Produced 2019 
Provided To Others? Yes  
Impact This product was developed during an NBIC funded secondment. 
URL https://youseq.com/product/the-one-16s-ngs-kit/8
 
Title Experimental model for pre-clinical screening of urological devices (Dario Carugo) 
Description The research model comprises a microfluidic-based mimic of the stented proximal urinary tract, which can be integrated with optical/fluorescence microscopy to determine the spatio-temporal evolution of encrustation in urological devices during product development. 
Type Of Material Database/Collection of data 
Year Produced 2020 
Provided To Others? Yes  
Impact Models could be potentially employed as an alternative to animal models, in the process of iteration and pre-clinical assessment of innovative ureteric stent designs. It specifically enables investigation of the effect of urinary flow dynamics, stent's architecture, and material properties on the initiation of bacteria/crystal deposition and biofilm formation. 
URL https://www.mdpi.com/2072-666X/11/4/408
 
Title Grant data from 01POC18027 (Samantha McLean) 
Description Data arising from the PoC grant, raw data files have been uploaded to Zenodo.org. This is a closed dataset until publication, at which time it will be published in accordance with the journal requirements. Access to this data can be requested by contacting samantha.mclean@ntu.ac.uk. 
Type Of Material Database/Collection of data 
Year Produced 2021 
Provided To Others? No  
Impact N/A 
 
Title Model for reaction in a rotating spiral bioreactor (Jordan MacInnes) 
Description The mathematical model provides a consistent detailed representation of the mass transfer and reaction within a microbial bed in a rotating spiral channel. The model allows rapid determination of optimum reactor operation once a small number of bed properties are determined empirically. 
Type Of Material Computer model/algorithm 
Year Produced 2021 
Provided To Others? No  
Impact We are currently using the model to understand optimisation of catalytic particle reaction in our prototype spiral bioreactor. 
 
Title National Biofilms Innovation Centre Data and Resource Index 
Description Most Universities within the NBIC consortium already have large data storage facilities and the capacity to assign unique and permanent Digital Object Identifiers. The NBIC Universities will provide mechanisms and services for storage, backup, registration, deposit, retention and preservation of research data assets in support of current and future access, during and after completion of research projects. All NBIC partners will be required to agree to store all data, whether published or unpublished, in their institutional repositories or authorised storage facilities. NBIC are in a unique position to create data sharing policies and workflows for biofilm data. Metadata records for the data (and published outputs) generated by the consortium will be maintained by NBIC. In accordance with this, the data will be archived from a minimum of ten years after publication or last access, whichever is longer. This register includes reference to the relevant DOIs and points of contact to ensure data access is easily managed. Data will be accompanied by contextual information to enable secondary users to gain access to details on the origin or manipulation of the data to avoid misinterpretation or misuse. Future users of the data will be bound by data sharing agreements. Where suitable a licence (for example Creative Commons) can be applied to data deposited in the repository. 
Type Of Material Database/Collection of data 
Year Produced 2019 
Provided To Others? Yes  
Impact We are continuing to develop a cultural shift towards ensuring the availability of unpublished data across the NBIC consortium. We have held a workshop on data and software sustainability and are moving towards developing a community platform available to all partners. https://www.software.ac.uk/blog/2019-12-16-2019-national-biofilms-innovation-centre-workshop 
 
Title OM model development (Angela Oates) 
Description 1. Development and Validation of Osteomyelitis Biofilm Infection Model-stable and reproducible growth of S.aureus biofilm on HA discs 2. Optimisation of porous bone cement-rations of carboxymethyl cellulose (CMC) gel and smartset bone cement to generate porous bone barriers 
Type Of Material Database/Collection of data 
Year Produced 2021 
Provided To Others? No  
Impact Development of static model which stimulated porous bone in osteo enabled the exploration of plasma penetration through this barrier and measure its efficacy against propergated biofilms. Parameters of plasma doing could then be optimised. 
 
Title PlasmaTec Plasma testing data (Angela Oates) 
Description Viable count data or zone of inhibition size on s. aureus planktonic and biofilm populations 1.Treatment Time and Flow Rate Parameter Testing on Planktonic Populations-s. aureus 1,3 and 5 mins at 15w and flow 5slm 2. Flow rate optimisation -1cm distance 15w power settings 300s treatment-2.5,3.7,5 slm flow rate 3. PlasmaTec testing against Colony biofilms-biofilm age 1hr, 2hr, 4hr,6hr and 24hr 4. Hydroxyapatite Disk Biofilms Direct Dosing-biofilm age 2,4,6and24hr treated for 300s 15w, 5slm flow at 1cm distance 5. Hydroxyapatite Disk Biofilms Direct Dosing. pulses of 1min for a treatment of 5 mins 6. Treatment Time and Flow Rate Parameter Testing on Planktonic Populations (5cm distance) 7. Temperature evaluation 
Type Of Material Database/Collection of data 
Year Produced 2020 
Provided To Others? No  
Impact Evaluation of the efficacy of plasma from the device and identification of temperature effect. 
 
Title Raw sequence data: Influence of phosphate dosing on biofilms development on lead in chlorinated drinking water bioreactors (Isabel Doutelero) 
Description Raw sequence data that support the findings of this study have been deposited in NCBI library as a Sequence Read Archive (SRA) with the accession code PRJNA663268 (https://www.ncbi.nlm.nih.gov/Traces/study/?acc=PRJNA663268). 
Type Of Material Database/Collection of data 
Year Produced 2019 
Provided To Others? Yes  
Impact Better understanding of the practice of phosphate dosing for water companies in the UK. 
URL https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7585443/
 
Title Steriplas Penetration and Efficacy Plasma in the OM Biofilm Infection Model and Bone (Angela Oates) 
Description Viable counts 1. Penetration and Efficacy Plasma in the OM Biofilm Infection Model-24hr biofilms + porous bone cement. Plasma dosing occurred at 24hr (10 minutes) which was repeated after 2hr. single v double dosing 2.Temperature changes in response to plasma -evaluation of additional parameter to assess if this is contributing to effect seen 3.Demonstration of Plasma Penetration Through Porous Bone Cement-comparison between porous bone cement, bone cement and plastic barrier 4.Preliminary Testing of the Efficacy of Plasma Treatment on Osteomyelitis Biofilms-Bone used in place of porous bone cement barrier in OM infection model 5. Preliminary Testing of the Efficacy of Plasma Treatment on Osteomyelitis Biofilms-Drilled bone used in place of porous bone cement barrier in OM infection model 
Type Of Material Database/Collection of data 
Year Produced 2021 
Provided To Others? No  
Impact Understanding of of the role biological mater in plasma penetration and efficacy. 
 
Title Steriplas Plasma doing optimisation (Angela Oates) 
Description Viable counts of 1. Effect of Plasma on Planktonic Populations and Hydroxyapatite Biofilms using current treatment settings-against 0hr, 5hr and 24hr biofilms 2.Evaluation of the frequency of Treatment: 10 Minute Dosing vs Multiple Dosing against 24hr biofilms. (1) single dose: 10 minutes plasma dosing at 24hrs, (2) Double dose: 10 minutes plasma dosing at 24hrs, repeated 2 hours later and (3) Triple dose: 10 minutes plasma dosing at 24hrs, repeated 2hr and 4hr. 
Type Of Material Database/Collection of data 
Year Produced 2021 
Provided To Others? No  
Impact Optimisation of dosing strategy to be testing in model and bone. Data shared with partner company. 
 
Title Wound biofilm volatile compound database 
Description The project has resulted in the generation of data sets related to the development of the sensor response of the Altered Carbon sensor array to key microbial volatiles emanating from wound biofilms. 
Type Of Material Database/Collection of data 
Year Produced 2020 
Provided To Others? No  
Impact This proof-of-concept study has resulted in identification of a suitable Altered Carbon graphene sensor array, that with further refinement and tuning has the potential to lead to development of a sensor array capable of discriminating between P. aeruginosa, S. aureus and S. pyogenes biofilms and sterile control samples. This work lays the foundation for development of a sensor system that can be applied to identification of these bacterial species in a clinical setting, and funding is now being sought to exploit these study findings. 
 
Description 20ALERT Live 3D Confocal Imaging in real time with high throughput, multipoint, targeted acquisition and AI-assisted quantification (Kim Hardie and Miguel Camara) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution BBSRC funding reference BB/V019414/1.
Collaborator Contribution Joint funding.
Impact Capabilities in cell, tissue and material engineering and bioprinting in 2D and 3D require next level analytical platforms. These span the length-scales of macro- (cell behaviours, physical attributes) to micro- and nano-scale. The latter includes protein crystallisation and high field NMR optimised for challenging systems (proteins / RNA / lipids etc). Our systems have capabilities such as high sensitivity cryogenically cooled probes, solid-state magic angle spinning (Ultrafast spinning upto 65 KHz), reaction monitoring and automaton for screening.
Start Year 2021
 
Description 20ALERT Live 3D Confocal Imaging in real time with high throughput, multipoint, targeted acquisition and AI-assisted quantification (Kim Hardie and Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution BBSRC funding reference BB/V019414/1.
Collaborator Contribution Joint funding.
Impact Capabilities in cell, tissue and material engineering and bioprinting in 2D and 3D require next level analytical platforms. These span the length-scales of macro- (cell behaviours, physical attributes) to micro- and nano-scale. The latter includes protein crystallisation and high field NMR optimised for challenging systems (proteins / RNA / lipids etc). Our systems have capabilities such as high sensitivity cryogenically cooled probes, solid-state magic angle spinning (Ultrafast spinning upto 65 KHz), reaction monitoring and automaton for screening.
Start Year 2021
 
Description 3M collaborative research project (Miguel Camara) 
Organisation 3M
Country United States 
Sector Private 
PI Contribution Confidential
Collaborator Contribution Confidential
Impact Ongoing research
Start Year 2018
 
Description A joint workshop between the UK's National Biofilm Innovation Centre and the West African Centre for Cell Biology of Infectious Pathogens (Miguel Camara) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution This award will allow us to establish a new synergistic partnership between the UK's National Biofilm Innovation Centre (NBIC) and the West African Centre for Cell Biology of Infectious Pathogens (WACCBIP) in Ghana. Biofilms are implicated in some of the most critical global challenges and have significant economic impact across multiple sectors. They are a leading cause of chronic infections and antimicrobial resistance (AMR), described in June 2021 by G7 Health Ministers as a "silent pandemic"1 and the cause of at least 700,000 deaths globally each year. This is predicated to rise to 10M deaths a year and cost US$100Tn in world GDP by 2050 if no action is taken2. In the UK, biofilm-mediated chronic infections are estimated to cost the NHS £7.2Bn per annum3. NBIC represents a fusion of world-class research and industry to deliver breakthrough technologies in the control and exploitation of biofilms. Established in 2017, it is an interdisciplinary centre, bringing together 4 lead and 59 associate UK universities and their infrastructure, and support from a growing industry hub of over 250 companies (SME to multinational) across multiple sectors where biofilms offer both problems and opportunities. Given their global importance, NBIC is strongly committed to establishing new international partnerships to bring together the wide and diverse range of perspectives, needs and expertise required to address biofilm-related challenges. WACCBIP is one of the World Bank's Centres of Excellence at the University of Ghana. It was founded in 2013 and is led by faculty from the Department of Biochemistry, Cell and Molecular Biology and the Noguchi Memorial Institute for Medical Research (NMIMR) The centre conducts applied research into the biology and pathogenesis of tropical diseases and aims to increase research and innovation by enhancing collaboration among biomedical scientists and industry leaders across Africa.
Collaborator Contribution Full partnership.
Impact None yet
Start Year 2022
 
Description A joint workshop between the UK's National Biofilm Innovation Centre and the West African Centre for Cell Biology of Infectious Pathogens (Miguel Camara) 
Organisation Medicines Discovery Catapult
Country United Kingdom 
Sector Private 
PI Contribution This award will allow us to establish a new synergistic partnership between the UK's National Biofilm Innovation Centre (NBIC) and the West African Centre for Cell Biology of Infectious Pathogens (WACCBIP) in Ghana. Biofilms are implicated in some of the most critical global challenges and have significant economic impact across multiple sectors. They are a leading cause of chronic infections and antimicrobial resistance (AMR), described in June 2021 by G7 Health Ministers as a "silent pandemic"1 and the cause of at least 700,000 deaths globally each year. This is predicated to rise to 10M deaths a year and cost US$100Tn in world GDP by 2050 if no action is taken2. In the UK, biofilm-mediated chronic infections are estimated to cost the NHS £7.2Bn per annum3. NBIC represents a fusion of world-class research and industry to deliver breakthrough technologies in the control and exploitation of biofilms. Established in 2017, it is an interdisciplinary centre, bringing together 4 lead and 59 associate UK universities and their infrastructure, and support from a growing industry hub of over 250 companies (SME to multinational) across multiple sectors where biofilms offer both problems and opportunities. Given their global importance, NBIC is strongly committed to establishing new international partnerships to bring together the wide and diverse range of perspectives, needs and expertise required to address biofilm-related challenges. WACCBIP is one of the World Bank's Centres of Excellence at the University of Ghana. It was founded in 2013 and is led by faculty from the Department of Biochemistry, Cell and Molecular Biology and the Noguchi Memorial Institute for Medical Research (NMIMR) The centre conducts applied research into the biology and pathogenesis of tropical diseases and aims to increase research and innovation by enhancing collaboration among biomedical scientists and industry leaders across Africa.
Collaborator Contribution Full partnership.
Impact None yet
Start Year 2022
 
Description A joint workshop between the UK's National Biofilm Innovation Centre and the West African Centre for Cell Biology of Infectious Pathogens (Miguel Camara) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This award will allow us to establish a new synergistic partnership between the UK's National Biofilm Innovation Centre (NBIC) and the West African Centre for Cell Biology of Infectious Pathogens (WACCBIP) in Ghana. Biofilms are implicated in some of the most critical global challenges and have significant economic impact across multiple sectors. They are a leading cause of chronic infections and antimicrobial resistance (AMR), described in June 2021 by G7 Health Ministers as a "silent pandemic"1 and the cause of at least 700,000 deaths globally each year. This is predicated to rise to 10M deaths a year and cost US$100Tn in world GDP by 2050 if no action is taken2. In the UK, biofilm-mediated chronic infections are estimated to cost the NHS £7.2Bn per annum3. NBIC represents a fusion of world-class research and industry to deliver breakthrough technologies in the control and exploitation of biofilms. Established in 2017, it is an interdisciplinary centre, bringing together 4 lead and 59 associate UK universities and their infrastructure, and support from a growing industry hub of over 250 companies (SME to multinational) across multiple sectors where biofilms offer both problems and opportunities. Given their global importance, NBIC is strongly committed to establishing new international partnerships to bring together the wide and diverse range of perspectives, needs and expertise required to address biofilm-related challenges. WACCBIP is one of the World Bank's Centres of Excellence at the University of Ghana. It was founded in 2013 and is led by faculty from the Department of Biochemistry, Cell and Molecular Biology and the Noguchi Memorial Institute for Medical Research (NMIMR) The centre conducts applied research into the biology and pathogenesis of tropical diseases and aims to increase research and innovation by enhancing collaboration among biomedical scientists and industry leaders across Africa.
Collaborator Contribution Full partnership.
Impact None yet
Start Year 2022
 
Description A joint workshop between the UK's National Biofilm Innovation Centre and the West African Centre for Cell Biology of Infectious Pathogens (Miguel Camara) 
Organisation NovaBiotics Ltd, UK
Country United Kingdom 
Sector Private 
PI Contribution This award will allow us to establish a new synergistic partnership between the UK's National Biofilm Innovation Centre (NBIC) and the West African Centre for Cell Biology of Infectious Pathogens (WACCBIP) in Ghana. Biofilms are implicated in some of the most critical global challenges and have significant economic impact across multiple sectors. They are a leading cause of chronic infections and antimicrobial resistance (AMR), described in June 2021 by G7 Health Ministers as a "silent pandemic"1 and the cause of at least 700,000 deaths globally each year. This is predicated to rise to 10M deaths a year and cost US$100Tn in world GDP by 2050 if no action is taken2. In the UK, biofilm-mediated chronic infections are estimated to cost the NHS £7.2Bn per annum3. NBIC represents a fusion of world-class research and industry to deliver breakthrough technologies in the control and exploitation of biofilms. Established in 2017, it is an interdisciplinary centre, bringing together 4 lead and 59 associate UK universities and their infrastructure, and support from a growing industry hub of over 250 companies (SME to multinational) across multiple sectors where biofilms offer both problems and opportunities. Given their global importance, NBIC is strongly committed to establishing new international partnerships to bring together the wide and diverse range of perspectives, needs and expertise required to address biofilm-related challenges. WACCBIP is one of the World Bank's Centres of Excellence at the University of Ghana. It was founded in 2013 and is led by faculty from the Department of Biochemistry, Cell and Molecular Biology and the Noguchi Memorial Institute for Medical Research (NMIMR) The centre conducts applied research into the biology and pathogenesis of tropical diseases and aims to increase research and innovation by enhancing collaboration among biomedical scientists and industry leaders across Africa.
Collaborator Contribution Full partnership.
Impact None yet
Start Year 2022
 
Description A joint workshop between the UK's National Biofilm Innovation Centre and the West African Centre for Cell Biology of Infectious Pathogens (Miguel Camara) 
Organisation University of Ghana
Department West Africa Centre for Cell Biology of Infectious Pathogens
Country Ghana 
Sector Academic/University 
PI Contribution This award will allow us to establish a new synergistic partnership between the UK's National Biofilm Innovation Centre (NBIC) and the West African Centre for Cell Biology of Infectious Pathogens (WACCBIP) in Ghana. Biofilms are implicated in some of the most critical global challenges and have significant economic impact across multiple sectors. They are a leading cause of chronic infections and antimicrobial resistance (AMR), described in June 2021 by G7 Health Ministers as a "silent pandemic"1 and the cause of at least 700,000 deaths globally each year. This is predicated to rise to 10M deaths a year and cost US$100Tn in world GDP by 2050 if no action is taken2. In the UK, biofilm-mediated chronic infections are estimated to cost the NHS £7.2Bn per annum3. NBIC represents a fusion of world-class research and industry to deliver breakthrough technologies in the control and exploitation of biofilms. Established in 2017, it is an interdisciplinary centre, bringing together 4 lead and 59 associate UK universities and their infrastructure, and support from a growing industry hub of over 250 companies (SME to multinational) across multiple sectors where biofilms offer both problems and opportunities. Given their global importance, NBIC is strongly committed to establishing new international partnerships to bring together the wide and diverse range of perspectives, needs and expertise required to address biofilm-related challenges. WACCBIP is one of the World Bank's Centres of Excellence at the University of Ghana. It was founded in 2013 and is led by faculty from the Department of Biochemistry, Cell and Molecular Biology and the Noguchi Memorial Institute for Medical Research (NMIMR) The centre conducts applied research into the biology and pathogenesis of tropical diseases and aims to increase research and innovation by enhancing collaboration among biomedical scientists and industry leaders across Africa.
Collaborator Contribution Full partnership.
Impact None yet
Start Year 2022
 
Description A joint workshop between the UK's National Biofilm Innovation Centre and the West African Centre for Cell Biology of Infectious Pathogens (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution This award will allow us to establish a new synergistic partnership between the UK's National Biofilm Innovation Centre (NBIC) and the West African Centre for Cell Biology of Infectious Pathogens (WACCBIP) in Ghana. Biofilms are implicated in some of the most critical global challenges and have significant economic impact across multiple sectors. They are a leading cause of chronic infections and antimicrobial resistance (AMR), described in June 2021 by G7 Health Ministers as a "silent pandemic"1 and the cause of at least 700,000 deaths globally each year. This is predicated to rise to 10M deaths a year and cost US$100Tn in world GDP by 2050 if no action is taken2. In the UK, biofilm-mediated chronic infections are estimated to cost the NHS £7.2Bn per annum3. NBIC represents a fusion of world-class research and industry to deliver breakthrough technologies in the control and exploitation of biofilms. Established in 2017, it is an interdisciplinary centre, bringing together 4 lead and 59 associate UK universities and their infrastructure, and support from a growing industry hub of over 250 companies (SME to multinational) across multiple sectors where biofilms offer both problems and opportunities. Given their global importance, NBIC is strongly committed to establishing new international partnerships to bring together the wide and diverse range of perspectives, needs and expertise required to address biofilm-related challenges. WACCBIP is one of the World Bank's Centres of Excellence at the University of Ghana. It was founded in 2013 and is led by faculty from the Department of Biochemistry, Cell and Molecular Biology and the Noguchi Memorial Institute for Medical Research (NMIMR) The centre conducts applied research into the biology and pathogenesis of tropical diseases and aims to increase research and innovation by enhancing collaboration among biomedical scientists and industry leaders across Africa.
Collaborator Contribution Full partnership.
Impact None yet
Start Year 2022
 
Description Agent Energy and HVB PoC (Eileen Yu) 
Organisation Argent Energy
Country United Kingdom 
Sector Private 
PI Contribution Through this collaboration, the aim of this research is to develop an optimised MES process with enhanced selectivity for high-value long-chain carbohydrates (C4-C8) production.
Collaborator Contribution Argent Energy will contribute in several ways for this project as a research partner. This includes providing: • Information on effluent waste gas enriched with CO2, and effluent organic waste streams; • Advice on research questions and directions for the project; • Staff time in project evaluation and taking part in project review meetings, • Access to site visits and relevant on-site data.
Impact Secured a BBSRC High value Biorenewables PoC funding with the project Enhance selectivity for high value bioproducts from CO2 and waste organics through microbial electrosynthesis.
Start Year 2021
 
Description Agent Energy and HVB PoC (Eileen Yu) 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution Through this collaboration, the aim of this research is to develop an optimised MES process with enhanced selectivity for high-value long-chain carbohydrates (C4-C8) production.
Collaborator Contribution Argent Energy will contribute in several ways for this project as a research partner. This includes providing: • Information on effluent waste gas enriched with CO2, and effluent organic waste streams; • Advice on research questions and directions for the project; • Staff time in project evaluation and taking part in project review meetings, • Access to site visits and relevant on-site data.
Impact Secured a BBSRC High value Biorenewables PoC funding with the project Enhance selectivity for high value bioproducts from CO2 and waste organics through microbial electrosynthesis.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation AlgiPharma
Country Norway 
Sector Private 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation Cardiff University
Country United Kingdom 
Sector Academic/University 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation Cystic Fibrosis Foundation
Country United States 
Sector Charity/Non Profit 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation Cystic Fibrosis Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation Georgia Institute of Technology
Country United States 
Sector Academic/University 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation Liverpool Heart and Chest Hospital
Country United Kingdom 
Sector Hospitals 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation Manchester University NHS Foundation Trust
Country United Kingdom 
Sector Public 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation Medicines Discovery Catapult
Country United Kingdom 
Sector Private 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation University of Cambridge
Country United Kingdom 
Sector Academic/University 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation University of Laval
Country Canada 
Sector Academic/University 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description An evidence-based preclinical framework for the development of antimicrobial therapeutics in cystic fibrosis (PIPE-CF). (Miguel Camara) 
Organisation University of Warwick
Country United Kingdom 
Sector Academic/University 
PI Contribution NBIC core partners, the Universities of Liverpool and Nottingham, are leading on a Strategic Research Centre as part of a new international collaboration to accelerate the development of much needed antibiotics for cystic fibrosis (CF) lung infections. Supported by £750,000 of funding from the Cystic Fibrosis Trust and the CF Foundation in the United States, the Strategic Research Centre will develop new laboratory methods to make it quicker and easier for researchers to test new medicines for CF. New Treatments Cystic Fibrosis Most people with CF will develop lung infections throughout their lifetimes. Once the bugs that cause the infections adapt to the environment of CF lungs they can be extremely difficult to treat. In some cases, the bugs are becoming resistant to the strongest medicines that are available. Left untreated, these infections can trigger permanent lung damage, meaning people are more breathless and have less energy to do day-to-day activities. More effective treatments with fewer side effects are urgently needed. Researchers around the world are currently working on the development of new medicines to treat CF lung infections. However, there are differences and gaps in how different researchers test new CF medicines in the laboratory meaning that the results are not comparable, which slows down progress. In addition, the tests that are used were not originally designed specifically to test CF medicines. For example, the tests don't mimic the effects of the thick sticky mucus found in the lungs of people with CF. This makes it hard to assess whether a potential medicine will work. The new four-year Strategic Research Centre (SRC) led by Dr Jo Fothergill at the University of Liverpool with Professor Miguel Cámara from the University of Nottingham as the deputy lead will develop a new set of laboratory methods specifically designed for testing new medicines for CF. The SRC will combine expertise in understanding the infection-causing bugs Pseudomonas aeruginosa, NTM and Burkholderia cepacia complex, with expertise in developing new lab methods.
Collaborator Contribution The SRC also involves co-investigators from Cambridge, Cardiff and Warwick; Liverpool Heart and Chest Hospital; Manchester University Hospitals NHS Trust; Georgia Institute of Technology in the USA and the Institut de biologie Intégrative et des systems in Quebec, Canada.
Impact No outputs yet.
Start Year 2021
 
Description Anti biofilm lactam technology 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution prior knowledge on biofilm and anti-biofilm protocols and related microbiology. chemical synthesis and bacterial strains.
Collaborator Contribution discussion of project processes, provision of reagents, industrial placement
Impact not yet
Start Year 2019
 
Description Areas of energy and resource recovery during environmental processes such as wastewater treatment and reuse (Mohamed Mamlouk) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution Ideas and discussion of possible joint projects.
Collaborator Contribution Host visitor and materials supply.
Impact Multi-disciplinary linking biology , electrochemistry and civil engineering.
Start Year 2020
 
Description Areas of energy and resource recovery during environmental processes such as wastewater treatment and reuse (Mohamed Mamlouk) 
Organisation Princeton University
Country United States 
Sector Academic/University 
PI Contribution Ideas and discussion of possible joint projects.
Collaborator Contribution Host visitor and materials supply.
Impact Multi-disciplinary linking biology , electrochemistry and civil engineering.
Start Year 2020
 
Description Assessment and optimisation of probiotic therapeutics against bacterial vaginosis biofilms (Ryan Kean) 
Organisation Ferring Pharmaceuticals
Country Switzerland 
Sector Private 
PI Contribution The data generated from NBIC POC 04POC21-235 has been used to secure £51,977 in funding from Ferring Pharmaceuticals to Glasgow Caledonian University, to investigate probiotic therapies against the BV model which was designed in this project. It is anticipated that future work packages will be follow on from this initial 5-month project.
Collaborator Contribution Contract research.
Impact None yet.
Start Year 2022
 
Description Assessment and optimisation of probiotic therapeutics against bacterial vaginosis biofilms (Ryan Kean) 
Organisation Glasgow Caledonian University
Country United Kingdom 
Sector Academic/University 
PI Contribution The data generated from NBIC POC 04POC21-235 has been used to secure £51,977 in funding from Ferring Pharmaceuticals to Glasgow Caledonian University, to investigate probiotic therapies against the BV model which was designed in this project. It is anticipated that future work packages will be follow on from this initial 5-month project.
Collaborator Contribution Contract research.
Impact None yet.
Start Year 2022
 
Description BBSRC CTP application (Paulina Rakowska) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution Developed application to BBSRC Collaborative Training Partnership scheme, where the lead applicant and industry partner is Smith & Nephew PLC, acting as a member of and on behalf of the NBICs Industry Advisory Board, supported by NBIC operational Team, who will supply the infrastructure to manage this programme and will coordinate the delivery of the cohort training. Grant value: over £1,500,000.
Collaborator Contribution NBICs Industry Advisory Board (Smith&Nephew, Unilever, GlaxoSmithKline, BP, Chilled Food Association, 5D Health Protection Group Ltd, Industrial Technology Innovation Centre (IBioIC) and Kohler Co), are the full partner on the proposal. The NBIC AIB co-developed the proposal by providing advise and direction to the shape of the CTP. Smith & Nephew is the main applicant, acting on behalf of the NBIC AIB.
Impact Consortium awarded funds for 15 PhDs. Award around £1.5 million.
Start Year 2020
 
Description BBSRC CTP application (Paulina Rakowska) 
Organisation BP (British Petroleum)
Country United Kingdom 
Sector Private 
PI Contribution Developed application to BBSRC Collaborative Training Partnership scheme, where the lead applicant and industry partner is Smith & Nephew PLC, acting as a member of and on behalf of the NBICs Industry Advisory Board, supported by NBIC operational Team, who will supply the infrastructure to manage this programme and will coordinate the delivery of the cohort training. Grant value: over £1,500,000.
Collaborator Contribution NBICs Industry Advisory Board (Smith&Nephew, Unilever, GlaxoSmithKline, BP, Chilled Food Association, 5D Health Protection Group Ltd, Industrial Technology Innovation Centre (IBioIC) and Kohler Co), are the full partner on the proposal. The NBIC AIB co-developed the proposal by providing advise and direction to the shape of the CTP. Smith & Nephew is the main applicant, acting on behalf of the NBIC AIB.
Impact Consortium awarded funds for 15 PhDs. Award around £1.5 million.
Start Year 2020
 
Description BBSRC CTP application (Paulina Rakowska) 
Organisation Chilled Food Association
Country United Kingdom 
Sector Private 
PI Contribution Developed application to BBSRC Collaborative Training Partnership scheme, where the lead applicant and industry partner is Smith & Nephew PLC, acting as a member of and on behalf of the NBICs Industry Advisory Board, supported by NBIC operational Team, who will supply the infrastructure to manage this programme and will coordinate the delivery of the cohort training. Grant value: over £1,500,000.
Collaborator Contribution NBICs Industry Advisory Board (Smith&Nephew, Unilever, GlaxoSmithKline, BP, Chilled Food Association, 5D Health Protection Group Ltd, Industrial Technology Innovation Centre (IBioIC) and Kohler Co), are the full partner on the proposal. The NBIC AIB co-developed the proposal by providing advise and direction to the shape of the CTP. Smith & Nephew is the main applicant, acting on behalf of the NBIC AIB.
Impact Consortium awarded funds for 15 PhDs. Award around £1.5 million.
Start Year 2020
 
Description BBSRC CTP application (Paulina Rakowska) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Developed application to BBSRC Collaborative Training Partnership scheme, where the lead applicant and industry partner is Smith & Nephew PLC, acting as a member of and on behalf of the NBICs Industry Advisory Board, supported by NBIC operational Team, who will supply the infrastructure to manage this programme and will coordinate the delivery of the cohort training. Grant value: over £1,500,000.
Collaborator Contribution NBICs Industry Advisory Board (Smith&Nephew, Unilever, GlaxoSmithKline, BP, Chilled Food Association, 5D Health Protection Group Ltd, Industrial Technology Innovation Centre (IBioIC) and Kohler Co), are the full partner on the proposal. The NBIC AIB co-developed the proposal by providing advise and direction to the shape of the CTP. Smith & Nephew is the main applicant, acting on behalf of the NBIC AIB.
Impact Consortium awarded funds for 15 PhDs. Award around £1.5 million.
Start Year 2020
 
Description BBSRC CTP application (Paulina Rakowska) 
Organisation Industrial Biotechnology Innovation Centre
Country United Kingdom 
Sector Academic/University 
PI Contribution Developed application to BBSRC Collaborative Training Partnership scheme, where the lead applicant and industry partner is Smith & Nephew PLC, acting as a member of and on behalf of the NBICs Industry Advisory Board, supported by NBIC operational Team, who will supply the infrastructure to manage this programme and will coordinate the delivery of the cohort training. Grant value: over £1,500,000.
Collaborator Contribution NBICs Industry Advisory Board (Smith&Nephew, Unilever, GlaxoSmithKline, BP, Chilled Food Association, 5D Health Protection Group Ltd, Industrial Technology Innovation Centre (IBioIC) and Kohler Co), are the full partner on the proposal. The NBIC AIB co-developed the proposal by providing advise and direction to the shape of the CTP. Smith & Nephew is the main applicant, acting on behalf of the NBIC AIB.
Impact Consortium awarded funds for 15 PhDs. Award around £1.5 million.
Start Year 2020
 
Description BBSRC CTP application (Paulina Rakowska) 
Organisation Kohler Co
Country United States 
Sector Private 
PI Contribution Developed application to BBSRC Collaborative Training Partnership scheme, where the lead applicant and industry partner is Smith & Nephew PLC, acting as a member of and on behalf of the NBICs Industry Advisory Board, supported by NBIC operational Team, who will supply the infrastructure to manage this programme and will coordinate the delivery of the cohort training. Grant value: over £1,500,000.
Collaborator Contribution NBICs Industry Advisory Board (Smith&Nephew, Unilever, GlaxoSmithKline, BP, Chilled Food Association, 5D Health Protection Group Ltd, Industrial Technology Innovation Centre (IBioIC) and Kohler Co), are the full partner on the proposal. The NBIC AIB co-developed the proposal by providing advise and direction to the shape of the CTP. Smith & Nephew is the main applicant, acting on behalf of the NBIC AIB.
Impact Consortium awarded funds for 15 PhDs. Award around £1.5 million.
Start Year 2020
 
Description BBSRC CTP application (Paulina Rakowska) 
Organisation Smith and Nephew
Country United Kingdom 
Sector Private 
PI Contribution Developed application to BBSRC Collaborative Training Partnership scheme, where the lead applicant and industry partner is Smith & Nephew PLC, acting as a member of and on behalf of the NBICs Industry Advisory Board, supported by NBIC operational Team, who will supply the infrastructure to manage this programme and will coordinate the delivery of the cohort training. Grant value: over £1,500,000.
Collaborator Contribution NBICs Industry Advisory Board (Smith&Nephew, Unilever, GlaxoSmithKline, BP, Chilled Food Association, 5D Health Protection Group Ltd, Industrial Technology Innovation Centre (IBioIC) and Kohler Co), are the full partner on the proposal. The NBIC AIB co-developed the proposal by providing advise and direction to the shape of the CTP. Smith & Nephew is the main applicant, acting on behalf of the NBIC AIB.
Impact Consortium awarded funds for 15 PhDs. Award around £1.5 million.
Start Year 2020
 
Description BBSRC CTP application (Paulina Rakowska) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution Developed application to BBSRC Collaborative Training Partnership scheme, where the lead applicant and industry partner is Smith & Nephew PLC, acting as a member of and on behalf of the NBICs Industry Advisory Board, supported by NBIC operational Team, who will supply the infrastructure to manage this programme and will coordinate the delivery of the cohort training. Grant value: over £1,500,000.
Collaborator Contribution NBICs Industry Advisory Board (Smith&Nephew, Unilever, GlaxoSmithKline, BP, Chilled Food Association, 5D Health Protection Group Ltd, Industrial Technology Innovation Centre (IBioIC) and Kohler Co), are the full partner on the proposal. The NBIC AIB co-developed the proposal by providing advise and direction to the shape of the CTP. Smith & Nephew is the main applicant, acting on behalf of the NBIC AIB.
Impact Consortium awarded funds for 15 PhDs. Award around £1.5 million.
Start Year 2020
 
Description BBSRC Global Partnering Award - collaborative proposal between NBIC and India Biofilm Society (Paulina Rakowska) 
Organisation Regional Centre for Biotechnology
Country India 
Sector Public 
PI Contribution Developed and submitted collaborative proposal to the BBSRC International Partnering Awards: India Partnering Award: Building globally leading partnership between India and UK's biofilm innovation centres. Collaboration between NBIC and India Biofilms Society. funding sought: £30000.
Collaborator Contribution Co-developed the proposal with intended in-kind contribution of £30000.
Impact Submitted proposal - unsuccessful.
Start Year 2020
 
Description BBSRC Global Partnering Award - collaborative proposal between NBIC and India Biofilm Society (Paulina Rakowska) 
Organisation SASTRA University
Country India 
Sector Academic/University 
PI Contribution Developed and submitted collaborative proposal to the BBSRC International Partnering Awards: India Partnering Award: Building globally leading partnership between India and UK's biofilm innovation centres. Collaboration between NBIC and India Biofilms Society. funding sought: £30000.
Collaborator Contribution Co-developed the proposal with intended in-kind contribution of £30000.
Impact Submitted proposal - unsuccessful.
Start Year 2020
 
Description BBSRC Global Partnering Award - collaborative proposal between NBIC and India Biofilm Society (Paulina Rakowska) 
Organisation Savitribai Phule Pune University
Country India 
Sector Academic/University 
PI Contribution Developed and submitted collaborative proposal to the BBSRC International Partnering Awards: India Partnering Award: Building globally leading partnership between India and UK's biofilm innovation centres. Collaboration between NBIC and India Biofilms Society. funding sought: £30000.
Collaborator Contribution Co-developed the proposal with intended in-kind contribution of £30000.
Impact Submitted proposal - unsuccessful.
Start Year 2020
 
Description BBSRC Global Partnering Award - collaborative proposal between NBIC and India Biofilm Society (Paulina Rakowska) 
Organisation Tripura University
Country India 
Sector Academic/University 
PI Contribution Developed and submitted collaborative proposal to the BBSRC International Partnering Awards: India Partnering Award: Building globally leading partnership between India and UK's biofilm innovation centres. Collaboration between NBIC and India Biofilms Society. funding sought: £30000.
Collaborator Contribution Co-developed the proposal with intended in-kind contribution of £30000.
Impact Submitted proposal - unsuccessful.
Start Year 2020
 
Description BBSRC and MRC Ageing Across the Lifecourse Networks (Peter Smith) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution This is a BBSRC funded project reference BB/W018284/1. MyAge will break down the silos associated with reductionist research and bring together non-overlapping expertise of researchers, industrialists and stakeholders from muscle research, me-tabolism, regenerative medicine, genomics, epigenetics, maths, data and social sciences, health inequity, biotech and pharma to understand the mechanistic pathways of muscle development, differentiation and decline. Although considerable research has focused on the better understand-ing of the determinants of muscle ageing, the complexity of the ageing process itself requires an innovative research approach that shifts away from studying single systems in isolation towards an integrative and holistic understanding of muscle ageing where multidimensional molecular, physio-logical, organism and population level research is combined. This approach aligns strongly with rec-ommendations in The Physiological Society's report, "Growing older, better". MyAge will develop a ROADMAP that seeks to inform policy and UKRI funding calls.
Collaborator Contribution In partnership with stakeholders and industry partners we will explore interventions as well as therapeutic and lifestyle modifications that impact the progression of muscle differentiation and decline from a cellular and functional perspective. MyAge will gather researchers with expertise in regenerative biology, epigenetics, single cell analysis, nanotechnology, electrophysiology, molecular phenotyping, mitochondrial function, inflammation, endocrinology, organoid culture, performance, human ageing cohorts, and social impact. Using various model systems from nematodes to humans, the network will uncover how the molecular and metabolic landscape of myofibers, SC and non-SC progenitors and muscle tissue architecture change with ageing and through exposures to different environmental stimuli. We will integrate this knowledge with epidemiological, nutritional, societal and health inequity and inequality data. Using fMRI to image muscle during exercise will allow us to investigate the physiological basis of anabolic resistance With the latest advances in topological analysis, we will integrate complex, high dimensional data sets to unravel the fundamental mecha-nisms of muscle ageing and to define how the environmental factors though the life course affect muscle cell physiology, ageing and life course trajectory. MyAge is a new network of individual members, organisations and partners who have not previously worked together in this manner. It represents a new synthesis of disciplines. Within our membership there are pre-existing networks dealing with particular specialties, for exam-ple CMAR, (29 members from Birmingham and 22 from Nottingham). Additional networks of inves-tigators are CIMA, the Southampton Lifecourse Epidemiology Centre, the BRC Nutrition and Lifecourse theme and the IfLS. The latter has a membership of 350 investigators crossing the STEM subjects, Medicine, Health and Sociology. Bringing these groups together, alongside our individual members and partners, societies and enterprise, has never been done before. This novelty of inter-action will expedite the generation of new insights, pathways and strategies to address the chal-lenges of ageing. Although MyAge will focus on muscle ageing, our members and approach will add value to, and learn from, the proposed macro-coordination of the Ageing networks.
Impact None yet.
Start Year 2022
 
Description BBSRC and MRC Ageing Across the Lifecourse Networks (Peter Smith) 
Organisation Imperial College London
Country United Kingdom 
Sector Academic/University 
PI Contribution This is a BBSRC funded project reference BB/W018284/1. MyAge will break down the silos associated with reductionist research and bring together non-overlapping expertise of researchers, industrialists and stakeholders from muscle research, me-tabolism, regenerative medicine, genomics, epigenetics, maths, data and social sciences, health inequity, biotech and pharma to understand the mechanistic pathways of muscle development, differentiation and decline. Although considerable research has focused on the better understand-ing of the determinants of muscle ageing, the complexity of the ageing process itself requires an innovative research approach that shifts away from studying single systems in isolation towards an integrative and holistic understanding of muscle ageing where multidimensional molecular, physio-logical, organism and population level research is combined. This approach aligns strongly with rec-ommendations in The Physiological Society's report, "Growing older, better". MyAge will develop a ROADMAP that seeks to inform policy and UKRI funding calls.
Collaborator Contribution In partnership with stakeholders and industry partners we will explore interventions as well as therapeutic and lifestyle modifications that impact the progression of muscle differentiation and decline from a cellular and functional perspective. MyAge will gather researchers with expertise in regenerative biology, epigenetics, single cell analysis, nanotechnology, electrophysiology, molecular phenotyping, mitochondrial function, inflammation, endocrinology, organoid culture, performance, human ageing cohorts, and social impact. Using various model systems from nematodes to humans, the network will uncover how the molecular and metabolic landscape of myofibers, SC and non-SC progenitors and muscle tissue architecture change with ageing and through exposures to different environmental stimuli. We will integrate this knowledge with epidemiological, nutritional, societal and health inequity and inequality data. Using fMRI to image muscle during exercise will allow us to investigate the physiological basis of anabolic resistance With the latest advances in topological analysis, we will integrate complex, high dimensional data sets to unravel the fundamental mecha-nisms of muscle ageing and to define how the environmental factors though the life course affect muscle cell physiology, ageing and life course trajectory. MyAge is a new network of individual members, organisations and partners who have not previously worked together in this manner. It represents a new synthesis of disciplines. Within our membership there are pre-existing networks dealing with particular specialties, for exam-ple CMAR, (29 members from Birmingham and 22 from Nottingham). Additional networks of inves-tigators are CIMA, the Southampton Lifecourse Epidemiology Centre, the BRC Nutrition and Lifecourse theme and the IfLS. The latter has a membership of 350 investigators crossing the STEM subjects, Medicine, Health and Sociology. Bringing these groups together, alongside our individual members and partners, societies and enterprise, has never been done before. This novelty of inter-action will expedite the generation of new insights, pathways and strategies to address the chal-lenges of ageing. Although MyAge will focus on muscle ageing, our members and approach will add value to, and learn from, the proposed macro-coordination of the Ageing networks.
Impact None yet.
Start Year 2022
 
Description BBSRC and MRC Ageing Across the Lifecourse Networks (Peter Smith) 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution This is a BBSRC funded project reference BB/W018284/1. MyAge will break down the silos associated with reductionist research and bring together non-overlapping expertise of researchers, industrialists and stakeholders from muscle research, me-tabolism, regenerative medicine, genomics, epigenetics, maths, data and social sciences, health inequity, biotech and pharma to understand the mechanistic pathways of muscle development, differentiation and decline. Although considerable research has focused on the better understand-ing of the determinants of muscle ageing, the complexity of the ageing process itself requires an innovative research approach that shifts away from studying single systems in isolation towards an integrative and holistic understanding of muscle ageing where multidimensional molecular, physio-logical, organism and population level research is combined. This approach aligns strongly with rec-ommendations in The Physiological Society's report, "Growing older, better". MyAge will develop a ROADMAP that seeks to inform policy and UKRI funding calls.
Collaborator Contribution In partnership with stakeholders and industry partners we will explore interventions as well as therapeutic and lifestyle modifications that impact the progression of muscle differentiation and decline from a cellular and functional perspective. MyAge will gather researchers with expertise in regenerative biology, epigenetics, single cell analysis, nanotechnology, electrophysiology, molecular phenotyping, mitochondrial function, inflammation, endocrinology, organoid culture, performance, human ageing cohorts, and social impact. Using various model systems from nematodes to humans, the network will uncover how the molecular and metabolic landscape of myofibers, SC and non-SC progenitors and muscle tissue architecture change with ageing and through exposures to different environmental stimuli. We will integrate this knowledge with epidemiological, nutritional, societal and health inequity and inequality data. Using fMRI to image muscle during exercise will allow us to investigate the physiological basis of anabolic resistance With the latest advances in topological analysis, we will integrate complex, high dimensional data sets to unravel the fundamental mecha-nisms of muscle ageing and to define how the environmental factors though the life course affect muscle cell physiology, ageing and life course trajectory. MyAge is a new network of individual members, organisations and partners who have not previously worked together in this manner. It represents a new synthesis of disciplines. Within our membership there are pre-existing networks dealing with particular specialties, for exam-ple CMAR, (29 members from Birmingham and 22 from Nottingham). Additional networks of inves-tigators are CIMA, the Southampton Lifecourse Epidemiology Centre, the BRC Nutrition and Lifecourse theme and the IfLS. The latter has a membership of 350 investigators crossing the STEM subjects, Medicine, Health and Sociology. Bringing these groups together, alongside our individual members and partners, societies and enterprise, has never been done before. This novelty of inter-action will expedite the generation of new insights, pathways and strategies to address the chal-lenges of ageing. Although MyAge will focus on muscle ageing, our members and approach will add value to, and learn from, the proposed macro-coordination of the Ageing networks.
Impact None yet.
Start Year 2022
 
Description BBSRC and MRC Ageing Across the Lifecourse Networks (Peter Smith) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution This is a BBSRC funded project reference BB/W018284/1. MyAge will break down the silos associated with reductionist research and bring together non-overlapping expertise of researchers, industrialists and stakeholders from muscle research, me-tabolism, regenerative medicine, genomics, epigenetics, maths, data and social sciences, health inequity, biotech and pharma to understand the mechanistic pathways of muscle development, differentiation and decline. Although considerable research has focused on the better understand-ing of the determinants of muscle ageing, the complexity of the ageing process itself requires an innovative research approach that shifts away from studying single systems in isolation towards an integrative and holistic understanding of muscle ageing where multidimensional molecular, physio-logical, organism and population level research is combined. This approach aligns strongly with rec-ommendations in The Physiological Society's report, "Growing older, better". MyAge will develop a ROADMAP that seeks to inform policy and UKRI funding calls.
Collaborator Contribution In partnership with stakeholders and industry partners we will explore interventions as well as therapeutic and lifestyle modifications that impact the progression of muscle differentiation and decline from a cellular and functional perspective. MyAge will gather researchers with expertise in regenerative biology, epigenetics, single cell analysis, nanotechnology, electrophysiology, molecular phenotyping, mitochondrial function, inflammation, endocrinology, organoid culture, performance, human ageing cohorts, and social impact. Using various model systems from nematodes to humans, the network will uncover how the molecular and metabolic landscape of myofibers, SC and non-SC progenitors and muscle tissue architecture change with ageing and through exposures to different environmental stimuli. We will integrate this knowledge with epidemiological, nutritional, societal and health inequity and inequality data. Using fMRI to image muscle during exercise will allow us to investigate the physiological basis of anabolic resistance With the latest advances in topological analysis, we will integrate complex, high dimensional data sets to unravel the fundamental mecha-nisms of muscle ageing and to define how the environmental factors though the life course affect muscle cell physiology, ageing and life course trajectory. MyAge is a new network of individual members, organisations and partners who have not previously worked together in this manner. It represents a new synthesis of disciplines. Within our membership there are pre-existing networks dealing with particular specialties, for exam-ple CMAR, (29 members from Birmingham and 22 from Nottingham). Additional networks of inves-tigators are CIMA, the Southampton Lifecourse Epidemiology Centre, the BRC Nutrition and Lifecourse theme and the IfLS. The latter has a membership of 350 investigators crossing the STEM subjects, Medicine, Health and Sociology. Bringing these groups together, alongside our individual members and partners, societies and enterprise, has never been done before. This novelty of inter-action will expedite the generation of new insights, pathways and strategies to address the chal-lenges of ageing. Although MyAge will focus on muscle ageing, our members and approach will add value to, and learn from, the proposed macro-coordination of the Ageing networks.
Impact None yet.
Start Year 2022
 
Description BBSRC and MRC Ageing Across the Lifecourse Networks (Peter Smith) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution This is a BBSRC funded project reference BB/W018284/1. MyAge will break down the silos associated with reductionist research and bring together non-overlapping expertise of researchers, industrialists and stakeholders from muscle research, me-tabolism, regenerative medicine, genomics, epigenetics, maths, data and social sciences, health inequity, biotech and pharma to understand the mechanistic pathways of muscle development, differentiation and decline. Although considerable research has focused on the better understand-ing of the determinants of muscle ageing, the complexity of the ageing process itself requires an innovative research approach that shifts away from studying single systems in isolation towards an integrative and holistic understanding of muscle ageing where multidimensional molecular, physio-logical, organism and population level research is combined. This approach aligns strongly with rec-ommendations in The Physiological Society's report, "Growing older, better". MyAge will develop a ROADMAP that seeks to inform policy and UKRI funding calls.
Collaborator Contribution In partnership with stakeholders and industry partners we will explore interventions as well as therapeutic and lifestyle modifications that impact the progression of muscle differentiation and decline from a cellular and functional perspective. MyAge will gather researchers with expertise in regenerative biology, epigenetics, single cell analysis, nanotechnology, electrophysiology, molecular phenotyping, mitochondrial function, inflammation, endocrinology, organoid culture, performance, human ageing cohorts, and social impact. Using various model systems from nematodes to humans, the network will uncover how the molecular and metabolic landscape of myofibers, SC and non-SC progenitors and muscle tissue architecture change with ageing and through exposures to different environmental stimuli. We will integrate this knowledge with epidemiological, nutritional, societal and health inequity and inequality data. Using fMRI to image muscle during exercise will allow us to investigate the physiological basis of anabolic resistance With the latest advances in topological analysis, we will integrate complex, high dimensional data sets to unravel the fundamental mecha-nisms of muscle ageing and to define how the environmental factors though the life course affect muscle cell physiology, ageing and life course trajectory. MyAge is a new network of individual members, organisations and partners who have not previously worked together in this manner. It represents a new synthesis of disciplines. Within our membership there are pre-existing networks dealing with particular specialties, for exam-ple CMAR, (29 members from Birmingham and 22 from Nottingham). Additional networks of inves-tigators are CIMA, the Southampton Lifecourse Epidemiology Centre, the BRC Nutrition and Lifecourse theme and the IfLS. The latter has a membership of 350 investigators crossing the STEM subjects, Medicine, Health and Sociology. Bringing these groups together, alongside our individual members and partners, societies and enterprise, has never been done before. This novelty of inter-action will expedite the generation of new insights, pathways and strategies to address the chal-lenges of ageing. Although MyAge will focus on muscle ageing, our members and approach will add value to, and learn from, the proposed macro-coordination of the Ageing networks.
Impact None yet.
Start Year 2022
 
Description Britest collaboration on cleaning (William Zimmerman) 
Organisation Britest
Country United Kingdom 
Sector Private 
PI Contribution Britest is a non-profit service company set up by it industrial consortium membership for the intensification of batch processing, drawing from biopharma, fine chemicals, agrichemicals and other process industries for its base. Britest has an ongoing initiative for better process cleaning, decontamination, disinfection and related technologies. Professor Joan Cordiner who joined the University of Sheffield and I presented our portfolio of cleaning related research activities to the Britest Symposium 21,22 January 2021 this year. The acting MD of Britest is liaising with the membership on our behalf to collaborate on EPSRC and InnovateUK grant proposals. Professor Cordiner's industrial background includes building expert systems for scheduling industrial plant / unit operation cleaning regimes.
Collaborator Contribution We are currently consortium building. We have a two page executive summary of the advances and research goals for the joint industry-academe programme, including the possibility of testing on the University of Sheffield unique £2m pilot plant tabletting facility for pharmaceutical engineering. In exchanges with industrial contacts, this is a facility that they would like to access for improving their cleaning regimes offline, i.e. not on their own production facility with valuable pharmaceuticals at full scale.
Impact Dissemination at the moment. Next major activity will be publication of the results of the NBIC funded feasibility study on biofilm removal. The final report is an excellent starting point.
Start Year 2020
 
Description Britest collaboration on cleaning (William Zimmerman) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Britest is a non-profit service company set up by it industrial consortium membership for the intensification of batch processing, drawing from biopharma, fine chemicals, agrichemicals and other process industries for its base. Britest has an ongoing initiative for better process cleaning, decontamination, disinfection and related technologies. Professor Joan Cordiner who joined the University of Sheffield and I presented our portfolio of cleaning related research activities to the Britest Symposium 21,22 January 2021 this year. The acting MD of Britest is liaising with the membership on our behalf to collaborate on EPSRC and InnovateUK grant proposals. Professor Cordiner's industrial background includes building expert systems for scheduling industrial plant / unit operation cleaning regimes.
Collaborator Contribution We are currently consortium building. We have a two page executive summary of the advances and research goals for the joint industry-academe programme, including the possibility of testing on the University of Sheffield unique £2m pilot plant tabletting facility for pharmaceutical engineering. In exchanges with industrial contacts, this is a facility that they would like to access for improving their cleaning regimes offline, i.e. not on their own production facility with valuable pharmaceuticals at full scale.
Impact Dissemination at the moment. Next major activity will be publication of the results of the NBIC funded feasibility study on biofilm removal. The final report is an excellent starting point.
Start Year 2020
 
Description Building a globally leading partnership between the UK National Biofilms Innovation Centre and Argentina (Miguel Camara) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Microbes are key in sustainable crop production but there are many unknowns on how populations of bacteria and fungi communities known as biofilms influence plant behaviour and impact on plant nutrition and protection, soil quality,bioremediation and climate change. This award brings together researchers/industry from the UK's National Biofilms Innovation Centre and Argentina to address this knowledge gap and improve agricultural productivity in both countries reducing the use of chemical treatments and their environmental impact. The objectives are to:-Bring together complementary academic/industrial expertise from these countries on the exploitation of biofilms in agriculture-Identify the key knowledge gaps and research challenges in this area of agricultural impact.-Develop a white paper that establishes priority research areas to address these gaps.-Create future research collaborations for the use of biofilms in crop production between the Uk and Argentina.
Collaborator Contribution Specific activities that will arise as outcomes from this collaborative programme include: •A joint UK-Argentine forumto share knowledge and facilitate future collaborations•Production and publication ofa 'white paper'on the current state of art, practices, challenges and research priority areasin the utilisation of plant -microbe interactionsin crop production in the UK, Argentina and globally.•Research internships for UK early career researchersto visitArgentinian institutions. These will be achieved through targeted calls subsidised by this award and based on the research priorities outlined in the white paper. The UKand Argentinianinstitutions will seekfurther funding to host Argentinian early career researchers. •Ajoint NBIC-SAMIGE/SAIB webinar seriesopenedto the international research community with talks from academic and industrial representatives to increase awareness of the research and innovation activities carried out within this collaborative partnership.•The establishment of a long-term strategic research programmebetween NBIC and the Argentinian partners enabling theco-development of jointfunding proposals.
Impact None yet.
Start Year 2021
 
Description Building a globally leading partnership between the UK National Biofilms Innovation Centre and Argentina (Miguel Camara) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Microbes are key in sustainable crop production but there are many unknowns on how populations of bacteria and fungi communities known as biofilms influence plant behaviour and impact on plant nutrition and protection, soil quality,bioremediation and climate change. This award brings together researchers/industry from the UK's National Biofilms Innovation Centre and Argentina to address this knowledge gap and improve agricultural productivity in both countries reducing the use of chemical treatments and their environmental impact. The objectives are to:-Bring together complementary academic/industrial expertise from these countries on the exploitation of biofilms in agriculture-Identify the key knowledge gaps and research challenges in this area of agricultural impact.-Develop a white paper that establishes priority research areas to address these gaps.-Create future research collaborations for the use of biofilms in crop production between the Uk and Argentina.
Collaborator Contribution Specific activities that will arise as outcomes from this collaborative programme include: •A joint UK-Argentine forumto share knowledge and facilitate future collaborations•Production and publication ofa 'white paper'on the current state of art, practices, challenges and research priority areasin the utilisation of plant -microbe interactionsin crop production in the UK, Argentina and globally.•Research internships for UK early career researchersto visitArgentinian institutions. These will be achieved through targeted calls subsidised by this award and based on the research priorities outlined in the white paper. The UKand Argentinianinstitutions will seekfurther funding to host Argentinian early career researchers. •Ajoint NBIC-SAMIGE/SAIB webinar seriesopenedto the international research community with talks from academic and industrial representatives to increase awareness of the research and innovation activities carried out within this collaborative partnership.•The establishment of a long-term strategic research programmebetween NBIC and the Argentinian partners enabling theco-development of jointfunding proposals.
Impact None yet.
Start Year 2021
 
Description Building a globally leading partnership between the UK National Biofilms Innovation Centre and Argentina (Miguel Camara) 
Organisation National Institute of Agricultural Technology
Country Argentina 
Sector Public 
PI Contribution Microbes are key in sustainable crop production but there are many unknowns on how populations of bacteria and fungi communities known as biofilms influence plant behaviour and impact on plant nutrition and protection, soil quality,bioremediation and climate change. This award brings together researchers/industry from the UK's National Biofilms Innovation Centre and Argentina to address this knowledge gap and improve agricultural productivity in both countries reducing the use of chemical treatments and their environmental impact. The objectives are to:-Bring together complementary academic/industrial expertise from these countries on the exploitation of biofilms in agriculture-Identify the key knowledge gaps and research challenges in this area of agricultural impact.-Develop a white paper that establishes priority research areas to address these gaps.-Create future research collaborations for the use of biofilms in crop production between the Uk and Argentina.
Collaborator Contribution Specific activities that will arise as outcomes from this collaborative programme include: •A joint UK-Argentine forumto share knowledge and facilitate future collaborations•Production and publication ofa 'white paper'on the current state of art, practices, challenges and research priority areasin the utilisation of plant -microbe interactionsin crop production in the UK, Argentina and globally.•Research internships for UK early career researchersto visitArgentinian institutions. These will be achieved through targeted calls subsidised by this award and based on the research priorities outlined in the white paper. The UKand Argentinianinstitutions will seekfurther funding to host Argentinian early career researchers. •Ajoint NBIC-SAMIGE/SAIB webinar seriesopenedto the international research community with talks from academic and industrial representatives to increase awareness of the research and innovation activities carried out within this collaborative partnership.•The establishment of a long-term strategic research programmebetween NBIC and the Argentinian partners enabling theco-development of jointfunding proposals.
Impact None yet.
Start Year 2021
 
Description Building a globally leading partnership between the UK National Biofilms Innovation Centre and Argentina (Miguel Camara) 
Organisation National Scientific and Technical Research Council (Argentina)
Country Argentina 
Sector Public 
PI Contribution Microbes are key in sustainable crop production but there are many unknowns on how populations of bacteria and fungi communities known as biofilms influence plant behaviour and impact on plant nutrition and protection, soil quality,bioremediation and climate change. This award brings together researchers/industry from the UK's National Biofilms Innovation Centre and Argentina to address this knowledge gap and improve agricultural productivity in both countries reducing the use of chemical treatments and their environmental impact. The objectives are to:-Bring together complementary academic/industrial expertise from these countries on the exploitation of biofilms in agriculture-Identify the key knowledge gaps and research challenges in this area of agricultural impact.-Develop a white paper that establishes priority research areas to address these gaps.-Create future research collaborations for the use of biofilms in crop production between the Uk and Argentina.
Collaborator Contribution Specific activities that will arise as outcomes from this collaborative programme include: •A joint UK-Argentine forumto share knowledge and facilitate future collaborations•Production and publication ofa 'white paper'on the current state of art, practices, challenges and research priority areasin the utilisation of plant -microbe interactionsin crop production in the UK, Argentina and globally.•Research internships for UK early career researchersto visitArgentinian institutions. These will be achieved through targeted calls subsidised by this award and based on the research priorities outlined in the white paper. The UKand Argentinianinstitutions will seekfurther funding to host Argentinian early career researchers. •Ajoint NBIC-SAMIGE/SAIB webinar seriesopenedto the international research community with talks from academic and industrial representatives to increase awareness of the research and innovation activities carried out within this collaborative partnership.•The establishment of a long-term strategic research programmebetween NBIC and the Argentinian partners enabling theco-development of jointfunding proposals.
Impact None yet.
Start Year 2021
 
Description Building a globally leading partnership between the UK National Biofilms Innovation Centre and Argentina (Miguel Camara) 
Organisation National University of Rosario
Country Argentina 
Sector Academic/University 
PI Contribution Microbes are key in sustainable crop production but there are many unknowns on how populations of bacteria and fungi communities known as biofilms influence plant behaviour and impact on plant nutrition and protection, soil quality,bioremediation and climate change. This award brings together researchers/industry from the UK's National Biofilms Innovation Centre and Argentina to address this knowledge gap and improve agricultural productivity in both countries reducing the use of chemical treatments and their environmental impact. The objectives are to:-Bring together complementary academic/industrial expertise from these countries on the exploitation of biofilms in agriculture-Identify the key knowledge gaps and research challenges in this area of agricultural impact.-Develop a white paper that establishes priority research areas to address these gaps.-Create future research collaborations for the use of biofilms in crop production between the Uk and Argentina.
Collaborator Contribution Specific activities that will arise as outcomes from this collaborative programme include: •A joint UK-Argentine forumto share knowledge and facilitate future collaborations•Production and publication ofa 'white paper'on the current state of art, practices, challenges and research priority areasin the utilisation of plant -microbe interactionsin crop production in the UK, Argentina and globally.•Research internships for UK early career researchersto visitArgentinian institutions. These will be achieved through targeted calls subsidised by this award and based on the research priorities outlined in the white paper. The UKand Argentinianinstitutions will seekfurther funding to host Argentinian early career researchers. •Ajoint NBIC-SAMIGE/SAIB webinar seriesopenedto the international research community with talks from academic and industrial representatives to increase awareness of the research and innovation activities carried out within this collaborative partnership.•The establishment of a long-term strategic research programmebetween NBIC and the Argentinian partners enabling theco-development of jointfunding proposals.
Impact None yet.
Start Year 2021
 
Description Building a globally leading partnership between the UK National Biofilms Innovation Centre and Argentina (Miguel Camara) 
Organisation National University of Río Cuarto
Country Argentina 
Sector Academic/University 
PI Contribution Microbes are key in sustainable crop production but there are many unknowns on how populations of bacteria and fungi communities known as biofilms influence plant behaviour and impact on plant nutrition and protection, soil quality,bioremediation and climate change. This award brings together researchers/industry from the UK's National Biofilms Innovation Centre and Argentina to address this knowledge gap and improve agricultural productivity in both countries reducing the use of chemical treatments and their environmental impact. The objectives are to:-Bring together complementary academic/industrial expertise from these countries on the exploitation of biofilms in agriculture-Identify the key knowledge gaps and research challenges in this area of agricultural impact.-Develop a white paper that establishes priority research areas to address these gaps.-Create future research collaborations for the use of biofilms in crop production between the Uk and Argentina.
Collaborator Contribution Specific activities that will arise as outcomes from this collaborative programme include: •A joint UK-Argentine forumto share knowledge and facilitate future collaborations•Production and publication ofa 'white paper'on the current state of art, practices, challenges and research priority areasin the utilisation of plant -microbe interactionsin crop production in the UK, Argentina and globally.•Research internships for UK early career researchersto visitArgentinian institutions. These will be achieved through targeted calls subsidised by this award and based on the research priorities outlined in the white paper. The UKand Argentinianinstitutions will seekfurther funding to host Argentinian early career researchers. •Ajoint NBIC-SAMIGE/SAIB webinar seriesopenedto the international research community with talks from academic and industrial representatives to increase awareness of the research and innovation activities carried out within this collaborative partnership.•The establishment of a long-term strategic research programmebetween NBIC and the Argentinian partners enabling theco-development of jointfunding proposals.
Impact None yet.
Start Year 2021
 
Description Building a globally leading partnership between the UK National Biofilms Innovation Centre and Argentina (Miguel Camara) 
Organisation University of La Plata
Country Argentina 
Sector Academic/University 
PI Contribution Microbes are key in sustainable crop production but there are many unknowns on how populations of bacteria and fungi communities known as biofilms influence plant behaviour and impact on plant nutrition and protection, soil quality,bioremediation and climate change. This award brings together researchers/industry from the UK's National Biofilms Innovation Centre and Argentina to address this knowledge gap and improve agricultural productivity in both countries reducing the use of chemical treatments and their environmental impact. The objectives are to:-Bring together complementary academic/industrial expertise from these countries on the exploitation of biofilms in agriculture-Identify the key knowledge gaps and research challenges in this area of agricultural impact.-Develop a white paper that establishes priority research areas to address these gaps.-Create future research collaborations for the use of biofilms in crop production between the Uk and Argentina.
Collaborator Contribution Specific activities that will arise as outcomes from this collaborative programme include: •A joint UK-Argentine forumto share knowledge and facilitate future collaborations•Production and publication ofa 'white paper'on the current state of art, practices, challenges and research priority areasin the utilisation of plant -microbe interactionsin crop production in the UK, Argentina and globally.•Research internships for UK early career researchersto visitArgentinian institutions. These will be achieved through targeted calls subsidised by this award and based on the research priorities outlined in the white paper. The UKand Argentinianinstitutions will seekfurther funding to host Argentinian early career researchers. •Ajoint NBIC-SAMIGE/SAIB webinar seriesopenedto the international research community with talks from academic and industrial representatives to increase awareness of the research and innovation activities carried out within this collaborative partnership.•The establishment of a long-term strategic research programmebetween NBIC and the Argentinian partners enabling theco-development of jointfunding proposals.
Impact None yet.
Start Year 2021
 
Description COST action 
Organisation BAM Federal Institute for Materials Research and Testing
Country Germany 
Sector Public 
PI Contribution Cost-Action Euro-MIC has been accepted. We seems to have scored full marks in all categories. There were a total of 90 co-applicants worldwide and from all disciplines. This is the product of an interdisciplinary collaboration.
Collaborator Contribution Committed to join the European MIC Network-New paths for science, sustainability and standards, when proposal will be successful. Proposal Reference OC-2020-1-24906.
Impact No outcomes yet.
Start Year 2021
 
Description Clinical collaboration with Salford Royal NHS Foundation Trust (Mohamed El Mohtadi) 
Organisation Manchester Metropolitan University
Country United Kingdom 
Sector Academic/University 
PI Contribution Securing the FTMA has allowed me to strengthen my collaboration with 5D Health Protection Group Ltd and Manchester Metropolitan University which resulted in me obtaining a Visiting Lecturer position at MMU. The in vitro work carried out during the fellowship has attracted clinical collaborations as we are now replicating the experiments using clinical samples obtained from Salford Royal NHS Foundation Trust operated Salford Royal Hospital.
Collaborator Contribution The role of collaborators (i.e. Dr Ashworth) involves the conceptualisation of project ideas and supervision of students. This will ultimately lead to increased research outcomes and the publication of several original research articles in the near future.
Impact Submission of a grant bid to the Academy of Medical Sciences. The application is currently under review.
Start Year 2020
 
Description Clinical collaboration with Salford Royal NHS Foundation Trust (Mohamed El Mohtadi) 
Organisation Salford Royal NHS Foundation Trust
Country United Kingdom 
Sector Public 
PI Contribution Securing the FTMA has allowed me to strengthen my collaboration with 5D Health Protection Group Ltd and Manchester Metropolitan University which resulted in me obtaining a Visiting Lecturer position at MMU. The in vitro work carried out during the fellowship has attracted clinical collaborations as we are now replicating the experiments using clinical samples obtained from Salford Royal NHS Foundation Trust operated Salford Royal Hospital.
Collaborator Contribution The role of collaborators (i.e. Dr Ashworth) involves the conceptualisation of project ideas and supervision of students. This will ultimately lead to increased research outcomes and the publication of several original research articles in the near future.
Impact Submission of a grant bid to the Academy of Medical Sciences. The application is currently under review.
Start Year 2020
 
Description Collaboration on Bioinformatics with the University of Glasgow (Isabel Doutelero) 
Organisation Commonwealth Scientific and Industrial Research Organisation
Country Australia 
Sector Public 
PI Contribution The experiments run to study climate change at the U. of Sheffield will be used to develop new bioinformatics tools by Dr Umer Ijaz (Reader in bioinformtics) at the U. of Glasgow. for drinking water systems.
Collaborator Contribution Dr Ijaz will studied the use of different bioinformatics tools to study the microbial ecology of drinking water distribution systems using DNA sequencing data from Sheffield experiments.
Impact Two PhD studentships have been advertised at the University of Glasgow.
Start Year 2019
 
Description Collaboration on Bioinformatics with the University of Glasgow (Isabel Doutelero) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution The experiments run to study climate change at the U. of Sheffield will be used to develop new bioinformatics tools by Dr Umer Ijaz (Reader in bioinformtics) at the U. of Glasgow. for drinking water systems.
Collaborator Contribution Dr Ijaz will studied the use of different bioinformatics tools to study the microbial ecology of drinking water distribution systems using DNA sequencing data from Sheffield experiments.
Impact Two PhD studentships have been advertised at the University of Glasgow.
Start Year 2019
 
Description Collaboration on Bioinformatics with the University of Glasgow (Isabel Doutelero) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution The experiments run to study climate change at the U. of Sheffield will be used to develop new bioinformatics tools by Dr Umer Ijaz (Reader in bioinformtics) at the U. of Glasgow. for drinking water systems.
Collaborator Contribution Dr Ijaz will studied the use of different bioinformatics tools to study the microbial ecology of drinking water distribution systems using DNA sequencing data from Sheffield experiments.
Impact Two PhD studentships have been advertised at the University of Glasgow.
Start Year 2019
 
Description Collaboration with Unilever for antibacterial surface (Xinyi Zhu) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution This project is confidentially, the details cannot be shared. Material surface characterisation has been done, and the application part is now in process.
Collaborator Contribution Input into the project.
Impact Details cannot be provided.
Start Year 2021
 
Description Collaboration with Universidad Politecnica de Valencia, Spain. (Isabel Doutelero) 
Organisation Polytechnic University of Valencia
Country Spain 
Sector Academic/University 
PI Contribution Collaboration between Isabel Douterelo with Prof Joaquin Izquierdo and Dr Silvia Carpitella, on decision making tools regarding the management of drinking water systems.
Collaborator Contribution Application of decision making tools to microbiological data from drinking water systems.
Impact One publication submitted: https://doi.org/10.3390/w12051247
Start Year 2019
 
Description Collaboration with Universidad Politecnica de Valencia, Spain. (Isabel Doutelero) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Collaboration between Isabel Douterelo with Prof Joaquin Izquierdo and Dr Silvia Carpitella, on decision making tools regarding the management of drinking water systems.
Collaborator Contribution Application of decision making tools to microbiological data from drinking water systems.
Impact One publication submitted: https://doi.org/10.3390/w12051247
Start Year 2019
 
Description Continued collaboration with ARM (Christopher Howe) 
Organisation Arm Limited
Country United Kingdom 
Sector Private 
PI Contribution Analysis of current generation from algal biofilms.
Collaborator Contribution Application of current generation from algal biofilms.
Impact None to date.
Start Year 2020
 
Description Continued collaboration with ARM (Christopher Howe) 
Organisation University of Cambridge
Country United Kingdom 
Sector Academic/University 
PI Contribution Analysis of current generation from algal biofilms.
Collaborator Contribution Application of current generation from algal biofilms.
Impact None to date.
Start Year 2020
 
Description Controlling bacterial aggregation 
Organisation Fujifilm
Department Fujifilm Diosynth Biotechnologies, UK
Country United Kingdom 
Sector Private 
PI Contribution We have made an intellectual contribution to the project and contributed a new experimental system for further investigation and potential exploitation.
Collaborator Contribution The collaborative team have brought intellectual and commercial expertise to the project, and have also linked us up to a wider collaborative group.
Impact This is an interdisciplinary project combining microbiology and molecular biology expertise with insights from soft matter physics and colloidal aggregation/self-assembly.
Start Year 2022
 
Description Creating of a working partnership between Valeport and PML (Karen Tait) 
Organisation Plymouth Marine Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution PML aims to develop a novel laboratory testing rig to allow Valeport to remotely quantify marine biofouling on a test panel.
Collaborator Contribution Valeport has provided the infrastructure for PML.
Impact The main outcome of the project so far has been significant external commercial interest from several multinational marine industrial organisations.
Start Year 2020
 
Description Creating of a working partnership between Valeport and PML (Karen Tait) 
Organisation Valeport
Country United Kingdom 
Sector Private 
PI Contribution PML aims to develop a novel laboratory testing rig to allow Valeport to remotely quantify marine biofouling on a test panel.
Collaborator Contribution Valeport has provided the infrastructure for PML.
Impact The main outcome of the project so far has been significant external commercial interest from several multinational marine industrial organisations.
Start Year 2020
 
Description Creation of working partnership between PML and Unilever (Karen Tait) 
Organisation Plymouth Marine Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution PML was able to provide the infrastructure and capability to test a product developed by Unilever in the marine environment with the aim of determining if it could be used as a means of deterring fouling.
Collaborator Contribution Unilever sought a partner who could test a product they had developed within the marine environment to prevent biofouling.
Impact PML has generated several data sets describing the ability of our partner's compound to prevent biofouling or biofouling related organisms from growing on a range of artificial surfaces. Also generated are several data sets describing the ability of the compound to inhibit growth of unicellular algae when the compound was in suspension in seawater.
Start Year 2019
 
Description Creation of working partnership between PML and Unilever (Karen Tait) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution PML was able to provide the infrastructure and capability to test a product developed by Unilever in the marine environment with the aim of determining if it could be used as a means of deterring fouling.
Collaborator Contribution Unilever sought a partner who could test a product they had developed within the marine environment to prevent biofouling.
Impact PML has generated several data sets describing the ability of our partner's compound to prevent biofouling or biofouling related organisms from growing on a range of artificial surfaces. Also generated are several data sets describing the ability of the compound to inhibit growth of unicellular algae when the compound was in suspension in seawater.
Start Year 2019
 
Description Development and application of a new technology for the targeted management of biofilms in human chronic wounds (Thomas Harle) 
Organisation Fourth State Medicine Ltd
Country United Kingdom 
Sector Private 
PI Contribution Full collaborative partners.
Collaborator Contribution Full collaborative partners.
Impact Continued work from the NBIC funded POC project (reference 02POC19129)
Start Year 2018
 
Description Development and application of a new technology for the targeted management of biofilms in human chronic wounds (Thomas Harle) 
Organisation Innovate UK
Country United Kingdom 
Sector Public 
PI Contribution Full collaborative partners.
Collaborator Contribution Full collaborative partners.
Impact Continued work from the NBIC funded POC project (reference 02POC19129)
Start Year 2018
 
Description Development and application of a new technology for the targeted management of biofilms in human chronic wounds (Thomas Harle) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution Full collaborative partners.
Collaborator Contribution Full collaborative partners.
Impact Continued work from the NBIC funded POC project (reference 02POC19129)
Start Year 2018
 
Description Development of Surgihoney and other compositions comprising an enzyme that is able to convert a substrate to release hydrogen peroxide as a novel biofilm-targeted topical therapy in chronic rhinosinusitis. (Jeremy Webb) 
Organisation Matoke Holdings
Country United Kingdom 
Sector Private 
PI Contribution Research.
Collaborator Contribution Funding and collaboration.
Impact Research outputs, please refer to https://journals.sagepub.com/doi/10.1177/1945892419874700.
Start Year 2018
 
Description Development of Surgihoney and other compositions comprising an enzyme that is able to convert a substrate to release hydrogen peroxide as a novel biofilm-targeted topical therapy in chronic rhinosinusitis. (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Research.
Collaborator Contribution Funding and collaboration.
Impact Research outputs, please refer to https://journals.sagepub.com/doi/10.1177/1945892419874700.
Start Year 2018
 
Description Development of polymicrobial skin colonisation model 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution prior knowledge on biofilms and protocol/development of skin colonisation protocols
Collaborator Contribution discussion to develop the project
Impact Barzan, G., A. Sacco, A., Mandrile, L., Giovannozzi, A.M., Brown, J., Portesi, C., Alexander, M., Williams, P., Hardie, K.R., and Rossi, A.M. (2019) New frontiers against multi-drug resistance: A Raman-based approach for detection of bacterial viability and cross-induced antibiotic resistances within 1 hour. In press Sensors and Actuators B: Chemical. Jordana-Luch, E., Gacia, V, Kingdon, A., Singh, N., Alexander, C., Williams, P., and Hardie, K.R. (2019). Development of a polymicrobial model to examine interactions between commensals and pathogens on skin. Submitted to Frontiers in Microbiology
Start Year 2015
 
Description Doctoral Training Partnership in Translational Biomedical Sciences (Mark Cragg) 
Organisation Medical Research Council (MRC)
Country United Kingdom 
Sector Public 
PI Contribution Medical Research Council (MCR) funded DTP.
Collaborator Contribution Medical Research Council (MCR) funded DTP.
Impact None yet.
Start Year 2021
 
Description Doctoral Training Partnership in Translational Biomedical Sciences (Mark Cragg) 
Organisation Queen Mary University of London
Country United Kingdom 
Sector Academic/University 
PI Contribution Medical Research Council (MCR) funded DTP.
Collaborator Contribution Medical Research Council (MCR) funded DTP.
Impact None yet.
Start Year 2021
 
Description Doctoral Training Partnership in Translational Biomedical Sciences (Mark Cragg) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Medical Research Council (MCR) funded DTP.
Collaborator Contribution Medical Research Council (MCR) funded DTP.
Impact None yet.
Start Year 2021
 
Description EPSRC Healthcare Technologies Programme Grant Application (Dario Carugo) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Collaborative writing EPSRC Healthcare Technologies Programme Grant Application.
Collaborator Contribution Collaborative writing EPSRC Healthcare Technologies Programme Grant Application.
Impact EP/V026623/1 (the grant application is still under review).
Start Year 2020
 
Description EPSRC IAA - Anti-Viral Surfaces and Materials (Rasmita Raval) 
Organisation Gencoa
Country United Kingdom 
Sector Private 
PI Contribution Developing anti-microbial technologies via knowledge-based design.
Collaborator Contribution Gencoa: The preparation of a range of novel antiviral surface coatings, production / test facilities and technical staff input. UKRI: Funding.
Impact Multi-disciplinary: Surface science, Chemistry, Imaging science, Microbiology.
Start Year 2020
 
Description EPSRC IAA - Anti-Viral Surfaces and Materials (Rasmita Raval) 
Organisation United Kingdom Research and Innovation
Country United Kingdom 
Sector Public 
PI Contribution Developing anti-microbial technologies via knowledge-based design.
Collaborator Contribution Gencoa: The preparation of a range of novel antiviral surface coatings, production / test facilities and technical staff input. UKRI: Funding.
Impact Multi-disciplinary: Surface science, Chemistry, Imaging science, Microbiology.
Start Year 2020
 
Description Edinburgh South Community Engagement (JC Denis) 
Organisation Edinburgh bioQuarter
Country United Kingdom 
Sector Private 
PI Contribution Contributed with funds, contacts and time for the delivery of community engagement activities to multi-deprived areas in the South of Edinburgh.
Collaborator Contribution Contributed with funds, contacts and time for the delivery of community engagement activities to multi-deprived areas in the South of Edinburgh.
Impact Delivery of multiple engagement activities.
Start Year 2018
 
Description Efficacy testing of CytaCoat antimicrobial catheter (Sandra Wilks) 
Organisation CytaCoat
Country Sweden 
Sector Private 
PI Contribution Consultancy work for CytaCoat using advanced biofilm analysis tools to demonstrate efficacy of their antimicrobial coating technology.
Collaborator Contribution Provided antimicrobial catheter for testing.
Impact None yet.
Start Year 2022
 
Description Exploring the disease-modifying potential of probiotic Bacillus subtilis in Parkinson's disease (Nicola Stanley-Wall) 
Organisation Johns Hopkins University
Department School of Medicine Johns Hopkins
Country United States 
Sector Academic/University 
PI Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Collaborator Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Impact None yet
Start Year 2021
 
Description Exploring the disease-modifying potential of probiotic Bacillus subtilis in Parkinson's disease (Nicola Stanley-Wall) 
Organisation Reta Lila Weston Trust For Medical Research
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Collaborator Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Impact None yet
Start Year 2021
 
Description Exploring the disease-modifying potential of probiotic Bacillus subtilis in Parkinson's disease (Nicola Stanley-Wall) 
Organisation Stavanger University Hospital
Country Norway 
Sector Hospitals 
PI Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Collaborator Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Impact None yet
Start Year 2021
 
Description Exploring the disease-modifying potential of probiotic Bacillus subtilis in Parkinson's disease (Nicola Stanley-Wall) 
Organisation University of Dundee
Country United Kingdom 
Sector Academic/University 
PI Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Collaborator Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Impact None yet
Start Year 2021
 
Description Exploring the disease-modifying potential of probiotic Bacillus subtilis in Parkinson's disease (Nicola Stanley-Wall) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Collaborator Contribution Research grant and clinical trial paid for by grant issued by Reta Lila Weston Trust For Medical Research.
Impact None yet
Start Year 2021
 
Description Feasibility test for large scale Microbial Electrolysis Cells (MEC) (Elizabeth Heidrich) 
Organisation Veolia Water Technologies
Country Italy 
Sector Private 
PI Contribution The modelling data generated here has helped predict performances for our actual pilot scale reactor, and we have secured further funding from Newcastle University impact acceleration accounts to trial the reactor set ups that were modelled. This will both validate the model outcomes and lead to a publication, but aslo provide real data on the performance of these reactors. We have partnered with Veolia who will use this performance data to input into their company software to analyse the impact that MEC technologies could have ont he energy use and resource recovery of wastewater treatment sites.
Collaborator Contribution Veolia has made a site visit to us and the pilot scale reactors to discuss the opportunities for this technology. We have had two zoom conference calls with the company to illustrate the capabilities of this modelling software, and the company have committed to doing several days of modelling for us when we have the data from the real systems to model.
Impact The original project was between maths and engineering We have secured University IAA funding.
Start Year 2022
 
Description Fellowship Enhancing the Effect of Antibiotics released from HA/ß-TCP bone grafts on Biofilm Mediated Osteomyelitis Using Quorum Sensing Inhibitors (Anirban Jyoti) 
Organisation Ceramisys
Country United Kingdom 
Sector Private 
PI Contribution Funding for this fellowship.
Collaborator Contribution Funding for this fellowship.
Impact None yet.
Start Year 2020
 
Description Fellowship Enhancing the Effect of Antibiotics released from HA/ß-TCP bone grafts on Biofilm Mediated Osteomyelitis Using Quorum Sensing Inhibitors (Anirban Jyoti) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding for this fellowship.
Collaborator Contribution Funding for this fellowship.
Impact None yet.
Start Year 2020
 
Description Fellowship Enhancing the Effect of Antibiotics released from HA/ß-TCP bone grafts on Biofilm Mediated Osteomyelitis Using Quorum Sensing Inhibitors (Anirban Jyoti) 
Organisation University of Surrey
Department Daphne Jackson Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Funding for this fellowship.
Collaborator Contribution Funding for this fellowship.
Impact None yet.
Start Year 2020
 
Description Global Challenges Research Fund (GCRF): Global-NAMRIP workshop (Kampala, Uganda) (Tim Leighton) 
Organisation Makerere University
Country Uganda 
Sector Academic/University 
PI Contribution Global Challenges Research Fund (GCRF) funding was secured by Tim Leighton to hold the 2nd Global Network for Antimicrobial Resistance and Infection Prevention Symposium.
Collaborator Contribution A jointly run symposium between Global-NAMRIP and Makerere University, Kampala, Uganda.
Impact The theme of the conference is 'Innovations towards combating antimicrobial resistance: a whole society engagement'. Delegates across a range of disciplines (healthcare, animal husbandry, food supply, water suppliers, and chemists and engineers researching new rapid diagnostic tools and therapies, and social scientists who examine our behaviour in responding to the AMR crisis) will present this 'whole society engagement'.
Start Year 2018
 
Description Global Challenges Research Fund (GCRF): Global-NAMRIP workshop (Kampala, Uganda) (Tim Leighton) 
Organisation United Kingdom Research and Innovation
Country United Kingdom 
Sector Public 
PI Contribution Global Challenges Research Fund (GCRF) funding was secured by Tim Leighton to hold the 2nd Global Network for Antimicrobial Resistance and Infection Prevention Symposium.
Collaborator Contribution A jointly run symposium between Global-NAMRIP and Makerere University, Kampala, Uganda.
Impact The theme of the conference is 'Innovations towards combating antimicrobial resistance: a whole society engagement'. Delegates across a range of disciplines (healthcare, animal husbandry, food supply, water suppliers, and chemists and engineers researching new rapid diagnostic tools and therapies, and social scientists who examine our behaviour in responding to the AMR crisis) will present this 'whole society engagement'.
Start Year 2018
 
Description Global Challenges Research Fund (GCRF): Global-NAMRIP workshop (Kampala, Uganda) (Tim Leighton) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Global Challenges Research Fund (GCRF) funding was secured by Tim Leighton to hold the 2nd Global Network for Antimicrobial Resistance and Infection Prevention Symposium.
Collaborator Contribution A jointly run symposium between Global-NAMRIP and Makerere University, Kampala, Uganda.
Impact The theme of the conference is 'Innovations towards combating antimicrobial resistance: a whole society engagement'. Delegates across a range of disciplines (healthcare, animal husbandry, food supply, water suppliers, and chemists and engineers researching new rapid diagnostic tools and therapies, and social scientists who examine our behaviour in responding to the AMR crisis) will present this 'whole society engagement'.
Start Year 2018
 
Description Holographic microscopy to investigate the impact of CPC on bacterial swimming motility (Morgan Alexander and Paul Williams) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Research project titled Holographic microscopy to investigate the impact of CPC on bacterial swimming motility.
Collaborator Contribution Funding and access to facilities.
Impact Confidential
Start Year 2020
 
Description Holographic microscopy to investigate the impact of CPC on bacterial swimming motility (Morgan Alexander and Paul Williams) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Research project titled Holographic microscopy to investigate the impact of CPC on bacterial swimming motility.
Collaborator Contribution Funding and access to facilities.
Impact Confidential
Start Year 2020
 
Description Impact Acceleration Account 2020-22: Bioinspired Antimicrobial Surfaces (Andrew Parnell) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution EPSRC provided funding for this project which is a continuation of work from the NBIC funded FTMA project (reference FTMA_20_IF_070).
Collaborator Contribution EPSRC provided funding for this project which is a continuation of work from the NBIC funded FTMA project (reference FTMA_20_IF_070).
Impact EPSRC provided funding for this project which is a continuation of work from the NBIC funded FTMA project (reference FTMA_20_IF_070).
Start Year 2021
 
Description Impact Acceleration Account 2020-22: Bioinspired Antimicrobial Surfaces (Andrew Parnell) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution EPSRC provided funding for this project which is a continuation of work from the NBIC funded FTMA project (reference FTMA_20_IF_070).
Collaborator Contribution EPSRC provided funding for this project which is a continuation of work from the NBIC funded FTMA project (reference FTMA_20_IF_070).
Impact EPSRC provided funding for this project which is a continuation of work from the NBIC funded FTMA project (reference FTMA_20_IF_070).
Start Year 2021
 
Description Industry partnership with LGC 
Organisation Laboratory of the Government Chemist (LGC) Ltd
Country United Kingdom 
Sector Private 
PI Contribution LGC Group, formerly the Laboratory of the Government Chemist, is an international life sciences measurement and tools company. It provides the role and duties of the UK Government Chemist, a statutory role and adviser to the government. We are working together in the metrology of biofilms, to understand the feasibility of developing new standards for molecular and 'omics approaches to measuring biofilms. We are providing the biofilm models and culture systems in order to generate biological material for the studies.
Collaborator Contribution LGC are applying in-house analytical measurements and approaches in order to understand the variability and reproducibility of biofilm assays, and the feasibility to develop new standards.
Impact Knowledge exchange in use of the CDC biofilm reactor model and in biofilm metrology.
Start Year 2021
 
Description Informal supervisor to EPSRC ICASE project (Paulina Rakowska) 
Organisation National Physical Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution Informal supervisor to EPSRC ICASE project: Profiling the mycobacteria biofilm: a multidisciplinary mix of mutants and mass spectrometry. Collaboration between NPL (my previous employer) and the university of Surrey (Dr Suzie Hingley-wilson and Prof. Mark Chambers). Student - Winnifred Akwani. Developed collaborative programme for the studentship. Co-authored proposal and formally supervised the student as industrial supervisor until moving to NBIC. Remaining as Informal supervisor until the end of the project.
Collaborator Contribution Developed collaborative project for the studentship. Co-authored proposal and formally supervised the student as academic supervisor.
Impact None yet.
Start Year 2018
 
Description Informal supervisor to EPSRC ICASE project (Paulina Rakowska) 
Organisation University of Surrey
Country United Kingdom 
Sector Academic/University 
PI Contribution Informal supervisor to EPSRC ICASE project: Profiling the mycobacteria biofilm: a multidisciplinary mix of mutants and mass spectrometry. Collaboration between NPL (my previous employer) and the university of Surrey (Dr Suzie Hingley-wilson and Prof. Mark Chambers). Student - Winnifred Akwani. Developed collaborative programme for the studentship. Co-authored proposal and formally supervised the student as industrial supervisor until moving to NBIC. Remaining as Informal supervisor until the end of the project.
Collaborator Contribution Developed collaborative project for the studentship. Co-authored proposal and formally supervised the student as academic supervisor.
Impact None yet.
Start Year 2018
 
Description Innovate UK The Sustainable Innovation Fund: SBRI Phase 2: Covid-19 worker safety tag with social distancing warnings and contact tracing functionality - anti microbials in plastics (Steve Law) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution Create test pieces of the X30 substrate with the AM additive and test that the additive does not affect the hazardous area material properties - in particular surface resistivity. This is an innovative step as there are no hazardous area approved materials with AM additives on the market. Eliminating the virus from the surface of the X30 will help prevent its spread. Additionally, dispensing Cold Plasma whilst the X30 is held within a multicharger will also help prevent virus spread. Innovate UK funding reference: 10004577.
Collaborator Contribution Full collaborative partners on this research project. In kind contribution from 5D Health Protection relates to internal labour and microbiology consumables.
Impact None yet.
Start Year 2021
 
Description Innovate UK The Sustainable Innovation Fund: SBRI Phase 2: Covid-19 worker safety tag with social distancing warnings and contact tracing functionality - anti microbials in plastics (Steve Law) 
Organisation Extronics Ltd
Country United Kingdom 
Sector Private 
PI Contribution Create test pieces of the X30 substrate with the AM additive and test that the additive does not affect the hazardous area material properties - in particular surface resistivity. This is an innovative step as there are no hazardous area approved materials with AM additives on the market. Eliminating the virus from the surface of the X30 will help prevent its spread. Additionally, dispensing Cold Plasma whilst the X30 is held within a multicharger will also help prevent virus spread. Innovate UK funding reference: 10004577.
Collaborator Contribution Full collaborative partners on this research project. In kind contribution from 5D Health Protection relates to internal labour and microbiology consumables.
Impact None yet.
Start Year 2021
 
Description Innovate UK The Sustainable Innovation Fund: SBRI Phase 2: Covid-19 worker safety tag with social distancing warnings and contact tracing functionality - anti microbials in plastics (Steve Law) 
Organisation Innovate UK
Country United Kingdom 
Sector Public 
PI Contribution Create test pieces of the X30 substrate with the AM additive and test that the additive does not affect the hazardous area material properties - in particular surface resistivity. This is an innovative step as there are no hazardous area approved materials with AM additives on the market. Eliminating the virus from the surface of the X30 will help prevent its spread. Additionally, dispensing Cold Plasma whilst the X30 is held within a multicharger will also help prevent virus spread. Innovate UK funding reference: 10004577.
Collaborator Contribution Full collaborative partners on this research project. In kind contribution from 5D Health Protection relates to internal labour and microbiology consumables.
Impact None yet.
Start Year 2021
 
Description Innovate UK The Sustainable Innovation Fund: SBRI Phase 2: Covid-19 worker safety tag with social distancing warnings and contact tracing functionality - anti microbials in plastics (Steve Law) 
Organisation University of Warwick
Country United Kingdom 
Sector Academic/University 
PI Contribution Create test pieces of the X30 substrate with the AM additive and test that the additive does not affect the hazardous area material properties - in particular surface resistivity. This is an innovative step as there are no hazardous area approved materials with AM additives on the market. Eliminating the virus from the surface of the X30 will help prevent its spread. Additionally, dispensing Cold Plasma whilst the X30 is held within a multicharger will also help prevent virus spread. Innovate UK funding reference: 10004577.
Collaborator Contribution Full collaborative partners on this research project. In kind contribution from 5D Health Protection relates to internal labour and microbiology consumables.
Impact None yet.
Start Year 2021
 
Description Innovate UK The Sustainable Innovation Fund: SBRI Phase 2: Covid-19 worker safety tag with social distancing warnings and contact tracing functionality - cold plasma (Marcus Swann) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution Create test pieces of the X30 substrate with the AM additive and test that the additive does not affect the hazardous area material properties - in particular surface resistivity. This is an innovative step as there are no hazardous area approved materials with AM additives on the market. Eliminating the virus from the surface of the X30 will help prevent its spread. Additionally, dispensing Cold Plasma whilst the X30 is held within a multicharger will also help prevent virus spread. Innovate UK funding reference: 10004577.
Collaborator Contribution Full collaborative partners in this research project. In kind contribution from 5D Health Protection relates to internal labour and microbiology consumables.
Impact None yet.
Start Year 2021
 
Description Innovate UK The Sustainable Innovation Fund: SBRI Phase 2: Covid-19 worker safety tag with social distancing warnings and contact tracing functionality - cold plasma (Marcus Swann) 
Organisation Extronics Ltd
Country United Kingdom 
Sector Private 
PI Contribution Create test pieces of the X30 substrate with the AM additive and test that the additive does not affect the hazardous area material properties - in particular surface resistivity. This is an innovative step as there are no hazardous area approved materials with AM additives on the market. Eliminating the virus from the surface of the X30 will help prevent its spread. Additionally, dispensing Cold Plasma whilst the X30 is held within a multicharger will also help prevent virus spread. Innovate UK funding reference: 10004577.
Collaborator Contribution Full collaborative partners in this research project. In kind contribution from 5D Health Protection relates to internal labour and microbiology consumables.
Impact None yet.
Start Year 2021
 
Description Innovate UK The Sustainable Innovation Fund: SBRI Phase 2: Covid-19 worker safety tag with social distancing warnings and contact tracing functionality - cold plasma (Marcus Swann) 
Organisation Innovate UK
Country United Kingdom 
Sector Public 
PI Contribution Create test pieces of the X30 substrate with the AM additive and test that the additive does not affect the hazardous area material properties - in particular surface resistivity. This is an innovative step as there are no hazardous area approved materials with AM additives on the market. Eliminating the virus from the surface of the X30 will help prevent its spread. Additionally, dispensing Cold Plasma whilst the X30 is held within a multicharger will also help prevent virus spread. Innovate UK funding reference: 10004577.
Collaborator Contribution Full collaborative partners in this research project. In kind contribution from 5D Health Protection relates to internal labour and microbiology consumables.
Impact None yet.
Start Year 2021
 
Description Innovate UK The Sustainable Innovation Fund: SBRI Phase 2: Covid-19 worker safety tag with social distancing warnings and contact tracing functionality - cold plasma (Marcus Swann) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Create test pieces of the X30 substrate with the AM additive and test that the additive does not affect the hazardous area material properties - in particular surface resistivity. This is an innovative step as there are no hazardous area approved materials with AM additives on the market. Eliminating the virus from the surface of the X30 will help prevent its spread. Additionally, dispensing Cold Plasma whilst the X30 is held within a multicharger will also help prevent virus spread. Innovate UK funding reference: 10004577.
Collaborator Contribution Full collaborative partners in this research project. In kind contribution from 5D Health Protection relates to internal labour and microbiology consumables.
Impact None yet.
Start Year 2021
 
Description Innovate UK: Anti-viral transparent adhesive protection for Touch Screens to help in the fight against COVID-19 (Rasmita Raval) 
Organisation Emerson & Renwick Limited
Country United Kingdom 
Sector Private 
PI Contribution Academic research and labs.
Collaborator Contribution Materials and subcontracting.
Impact Ongoing.
Start Year 2020
 
Description Innovate UK: Anti-viral transparent adhesive protection for Touch Screens to help in the fight against COVID-19 (Rasmita Raval) 
Organisation Gencoa
Country United Kingdom 
Sector Private 
PI Contribution Academic research and labs.
Collaborator Contribution Materials and subcontracting.
Impact Ongoing.
Start Year 2020
 
Description Innovate UK: Anti-viral transparent adhesive protection for Touch Screens to help in the fight against COVID-19 (Rasmita Raval) 
Organisation Innovate UK
Country United Kingdom 
Sector Public 
PI Contribution Academic research and labs.
Collaborator Contribution Materials and subcontracting.
Impact Ongoing.
Start Year 2020
 
Description Innovate UK: Anti-viral transparent adhesive protection for Touch Screens to help in the fight against COVID-19 (Rasmita Raval) 
Organisation Liverpool School of Tropical Medicine
Country United Kingdom 
Sector Academic/University 
PI Contribution Academic research and labs.
Collaborator Contribution Materials and subcontracting.
Impact Ongoing.
Start Year 2020
 
Description Innovate UK: Anti-viral transparent adhesive protection for Touch Screens to help in the fight against COVID-19 (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Academic research and labs.
Collaborator Contribution Materials and subcontracting.
Impact Ongoing.
Start Year 2020
 
Description Intelligent Imaging Innovations, Inc. (3i) 
Organisation Intelligent Imaging Innovations Ltd
Country United Kingdom 
Sector Private 
PI Contribution As a result of the BBSRC/NBIC funding (NBIC_FTMA_P_19_2_47 and NBIC_FTMA_20_IF_083) we have established a working relationship with 3i and now have a NBIC DTP iCASE studentship that will take forward promising results from these pump priming projects.
Collaborator Contribution 3i will provide access to advanced instrumentation and placment training for the iCASE student
Impact None to date
Start Year 2023
 
Description Investigations of material science and scale up processing of anti biofilm and additive Potential application areas (non-medical) (Vannessa Goodship) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution Investigations of material science and scale up processing of anti biofilm and additive Potential application areas (non-medical).
Collaborator Contribution Biological testing and guidance Potential application areas (medical).
Impact Multi-disciplinary: chemistry, material science, biological science SME engagement and intern programme.
Start Year 2021
 
Description Investigations of material science and scale up processing of anti biofilm and additive Potential application areas (non-medical) (Vannessa Goodship) 
Organisation High Value Manufacturing Catapult
Country United Kingdom 
Sector Private 
PI Contribution Investigations of material science and scale up processing of anti biofilm and additive Potential application areas (non-medical).
Collaborator Contribution Biological testing and guidance Potential application areas (medical).
Impact Multi-disciplinary: chemistry, material science, biological science SME engagement and intern programme.
Start Year 2021
 
Description Investigations of material science and scale up processing of anti biofilm and additive Potential application areas (non-medical) (Vannessa Goodship) 
Organisation University of Warwick
Country United Kingdom 
Sector Academic/University 
PI Contribution Investigations of material science and scale up processing of anti biofilm and additive Potential application areas (non-medical).
Collaborator Contribution Biological testing and guidance Potential application areas (medical).
Impact Multi-disciplinary: chemistry, material science, biological science SME engagement and intern programme.
Start Year 2021
 
Description Links with Science Centres of Excellence (Mark Richardson) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution We worked with NPL to establish links and collaborations. Together we submitted a project BID to BEIS to sreengthen science links with Singapore on Standards and anticipated hearing the outcome in January 2021.
Collaborator Contribution Developing project plans.
Impact Awaited.
Start Year 2021
 
Description Links with Science Centres of Excellence (Mark Richardson) 
Organisation National Physical Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution We worked with NPL to establish links and collaborations. Together we submitted a project BID to BEIS to sreengthen science links with Singapore on Standards and anticipated hearing the outcome in January 2021.
Collaborator Contribution Developing project plans.
Impact Awaited.
Start Year 2021
 
Description Loughborough University - Smith & Nephew Collaboration (Sourav Ghosh) 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution We provided Smith & Nephew with validation data from our rapid single-step bacterial detection assay in a wound-mimic buffer provided by Smith & Nephew. We also shared the data on rapid antimicrobial susceptibility test with response time and minimum inhibitory concentration using antimicrobial products of Smith & Nephew. These data encouraged Smith & Nephew to consider investing in a market analysis exercise for a rapid point-of-care wound diagnostic test to determine the key functional specifications needed and cost targets.
Collaborator Contribution Smith & Nephew helped by giving an industry steer. They advised on what could be the potential functional requirement specs of a rapid point-of-care wound test and shared wound-mimic buffer and their commercial antimicrobial products for evaluating our test under development.
Impact Research report has been written. A journal publication is planned in 2022.
Start Year 2019
 
Description Loughborough University - Smith & Nephew Collaboration (Sourav Ghosh) 
Organisation Smith and Nephew
Country United Kingdom 
Sector Private 
PI Contribution We provided Smith & Nephew with validation data from our rapid single-step bacterial detection assay in a wound-mimic buffer provided by Smith & Nephew. We also shared the data on rapid antimicrobial susceptibility test with response time and minimum inhibitory concentration using antimicrobial products of Smith & Nephew. These data encouraged Smith & Nephew to consider investing in a market analysis exercise for a rapid point-of-care wound diagnostic test to determine the key functional specifications needed and cost targets.
Collaborator Contribution Smith & Nephew helped by giving an industry steer. They advised on what could be the potential functional requirement specs of a rapid point-of-care wound test and shared wound-mimic buffer and their commercial antimicrobial products for evaluating our test under development.
Impact Research report has been written. A journal publication is planned in 2022.
Start Year 2019
 
Description MPhil Layer by layer (LBL) coating on urological devices to prevent biofilm formation and encrustation (Andrew Hamilton) 
Organisation University College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Co-supervision of this MPhil.
Collaborator Contribution Co-supervision of this MPhil.
Impact None yet.
Start Year 2021
 
Description MPhil Layer by layer (LBL) coating on urological devices to prevent biofilm formation and encrustation (Andrew Hamilton) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Co-supervision of this MPhil.
Collaborator Contribution Co-supervision of this MPhil.
Impact None yet.
Start Year 2021
 
Description Managing Aquatic Biofilms via Surface Manipulation Continuation (Katherine Fish) 
Organisation AkzoNobel
Department AkzoNobel UK
Country United Kingdom 
Sector Private 
PI Contribution Continuation of work started in NBIC POC 01POC18034.
Collaborator Contribution Full collaborative partners in continuation of this work.
Impact The results are inconclusive and at this stage there is no further funding and the project is completed.
Start Year 2020
 
Description Managing Aquatic Biofilms via Surface Manipulation Continuation (Katherine Fish) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Continuation of work started in NBIC POC 01POC18034.
Collaborator Contribution Full collaborative partners in continuation of this work.
Impact The results are inconclusive and at this stage there is no further funding and the project is completed.
Start Year 2020
 
Description Multi-user Light Sheet Fluorescence Microscopy (Robert Kelsh) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution We wish to add an important cutting-edge instrument to the University of Bath's microscopy facilities. Many aspects of physiology, cell and developmental biology are dynamic, including those on second (e.g. heart-beat), minute (e.g. cell migration) and hour or even day timescales (e.g. embryonic development and plant growth). Likewise, biological systems are frequently 3-dimensional, with structural arrangements being integral to their function (e.g. cardiovascular systems, brain, embryos). Thus, to study biological processes in detail, we need microscopy that can allow us to image biological processes on this range of timescales, and in intact 3-D samples (whole organisms, or tissues). A new technique, Light Sheet Fluorescent Microscopy (LSFM), allows all of these and promises to revolutionise these areas. Key aspects of the LSFM design ensure fast imaging, so that changes on time-scales of seconds-minutes can be resolved; gentle imaging, so that specimens are not damaged over long-term study for minutes, hours or even days; and deeper imaging, so that thicker specimens and whole living organisms become accessible. It means that we can study changes in response to drugs or pathogens over long timescales; that we can monitor cells as they migrate through complex tissues or even whole organisms, detecting changes in their behaviour as their environment alters; and that we can study processes in living cells organised into 3-D structures that more accurately mimic a physiological environment. In Bath, we propose using the LSFM for seven initial projects, each utilising one or more key features of LSFM: to study stem cells in developing zebrafish embryos, fat development in mouse models of body mass control, cell environment on cartilage properties, how bacterial communities (biofilms) become more efficient at evading antibiotic treatment, plant root responses to infection, how to make reproducible organoid cultures, and mapping neuronal activation in mouse brains. The instrument will be integrated into the Microscopy and Analysis Suite in the University of Bath, ensuring expert user training and equipment support. It will support a broad, interdisciplinary research community within the University of Bath and our collaborator institutions/organisations..
Collaborator Contribution We wish to expand the state-of-the-art microscopy facilities at the University of Bath by acquiring a highly capable, but user-friendly Light Sheet Fluorescent Microscope (LSFM). Modern biological studies must take account of the timescales (seconds-days) of physiological, cellular and developmental processes, and of the 3-D organisation of organisms and tissues (often, micrometre-centimetre scales). The LSFM allows imaging on these temporal and spatial scales, and is ideally suited to prolonged timelapse of living organisms, e.g. zebrafish and Arabidopsis roots, and 3-D cultures (organoids and spheroids). The approach is further enhanced when combined with new clearing approaches, allowing significant tissue/organ samples (e.g. mouse brains) to be imaged intact at high resolution. An instrument capable of all these In Bath, the team of applicants will use the LSFM to investigate stem cell and adipose tissue development, antibiotic resistance in biofilms, plant responses to pathogen infection, and neuronal activation in mouse brains, and to develop reproducible organoid culture processes. The integration of the LSFM into the Microscopy and Analysis Suite at the University of Bath, will ensuring expert equipment support and maintenance and user training. It will support a broad, interdisciplinary research community within the University of Bath and our collaborator institutions/organisations.
Impact Provision of Light Sheet Fluorescent Microscopy to the University of Bath will enable numerous multi-disciplinary studies in biosciences and bioengineering, as witnessed by the diversity of initial projects and breadth of user community brought together by this bid. These will in turn impact upon the competitiveness of the UK research base, and so to the UK knowledge economy. Our proposal aligns most closely to the BBSRC's 'Healthy ageing across the lifecourse', 'Technology development for the biosciences', 'Sustainably enhancing agricultural production' and 'Combatting microbial resistance' strategic priority areas, but also concerns 'Food, nutrition and health', 'International Partnerships', 'Reducing waste in the food chain', and 'Welfare of managed animals'. By providing novel imaging capability, the user consortium will be able to be able to investigate their model systems in ways allowing direct observation of dynamic processes and 3-D structures on scales outside of current capability. These observations will then have direct application to the strategic priority areas listed. Our work will have significant impact on 1) the academic community by allowing them to study living, 3-D models with much greater physiological relevance; 2) the private sector, including charities and pharmaceutical companies by developing new assays and new insights into biology, for example of drug resistance in tumours and biofilms; 3) skills training of post-graduate and post-doctoral researchers, enhancing their employability in academe, industry and elsewhere; 4) inter-disciplinary research, including mathematical biology which will be enhance by the quantitative data that may be extracted from LSFM data-sets. The data produced by the LSFM will often be best-presented as movies, and consequently they are often readily accessible to the public, not to mention exciting to watch. Our BBSRC ALERT18 bid will be announced to the public and research outputs disseminated through a range of public engagement activities.
Start Year 2019
 
Description Multi-user Light Sheet Fluorescence Microscopy (Robert Kelsh) 
Organisation University of Bath
Country United Kingdom 
Sector Academic/University 
PI Contribution We wish to add an important cutting-edge instrument to the University of Bath's microscopy facilities. Many aspects of physiology, cell and developmental biology are dynamic, including those on second (e.g. heart-beat), minute (e.g. cell migration) and hour or even day timescales (e.g. embryonic development and plant growth). Likewise, biological systems are frequently 3-dimensional, with structural arrangements being integral to their function (e.g. cardiovascular systems, brain, embryos). Thus, to study biological processes in detail, we need microscopy that can allow us to image biological processes on this range of timescales, and in intact 3-D samples (whole organisms, or tissues). A new technique, Light Sheet Fluorescent Microscopy (LSFM), allows all of these and promises to revolutionise these areas. Key aspects of the LSFM design ensure fast imaging, so that changes on time-scales of seconds-minutes can be resolved; gentle imaging, so that specimens are not damaged over long-term study for minutes, hours or even days; and deeper imaging, so that thicker specimens and whole living organisms become accessible. It means that we can study changes in response to drugs or pathogens over long timescales; that we can monitor cells as they migrate through complex tissues or even whole organisms, detecting changes in their behaviour as their environment alters; and that we can study processes in living cells organised into 3-D structures that more accurately mimic a physiological environment. In Bath, we propose using the LSFM for seven initial projects, each utilising one or more key features of LSFM: to study stem cells in developing zebrafish embryos, fat development in mouse models of body mass control, cell environment on cartilage properties, how bacterial communities (biofilms) become more efficient at evading antibiotic treatment, plant root responses to infection, how to make reproducible organoid cultures, and mapping neuronal activation in mouse brains. The instrument will be integrated into the Microscopy and Analysis Suite in the University of Bath, ensuring expert user training and equipment support. It will support a broad, interdisciplinary research community within the University of Bath and our collaborator institutions/organisations..
Collaborator Contribution We wish to expand the state-of-the-art microscopy facilities at the University of Bath by acquiring a highly capable, but user-friendly Light Sheet Fluorescent Microscope (LSFM). Modern biological studies must take account of the timescales (seconds-days) of physiological, cellular and developmental processes, and of the 3-D organisation of organisms and tissues (often, micrometre-centimetre scales). The LSFM allows imaging on these temporal and spatial scales, and is ideally suited to prolonged timelapse of living organisms, e.g. zebrafish and Arabidopsis roots, and 3-D cultures (organoids and spheroids). The approach is further enhanced when combined with new clearing approaches, allowing significant tissue/organ samples (e.g. mouse brains) to be imaged intact at high resolution. An instrument capable of all these In Bath, the team of applicants will use the LSFM to investigate stem cell and adipose tissue development, antibiotic resistance in biofilms, plant responses to pathogen infection, and neuronal activation in mouse brains, and to develop reproducible organoid culture processes. The integration of the LSFM into the Microscopy and Analysis Suite at the University of Bath, will ensuring expert equipment support and maintenance and user training. It will support a broad, interdisciplinary research community within the University of Bath and our collaborator institutions/organisations.
Impact Provision of Light Sheet Fluorescent Microscopy to the University of Bath will enable numerous multi-disciplinary studies in biosciences and bioengineering, as witnessed by the diversity of initial projects and breadth of user community brought together by this bid. These will in turn impact upon the competitiveness of the UK research base, and so to the UK knowledge economy. Our proposal aligns most closely to the BBSRC's 'Healthy ageing across the lifecourse', 'Technology development for the biosciences', 'Sustainably enhancing agricultural production' and 'Combatting microbial resistance' strategic priority areas, but also concerns 'Food, nutrition and health', 'International Partnerships', 'Reducing waste in the food chain', and 'Welfare of managed animals'. By providing novel imaging capability, the user consortium will be able to be able to investigate their model systems in ways allowing direct observation of dynamic processes and 3-D structures on scales outside of current capability. These observations will then have direct application to the strategic priority areas listed. Our work will have significant impact on 1) the academic community by allowing them to study living, 3-D models with much greater physiological relevance; 2) the private sector, including charities and pharmaceutical companies by developing new assays and new insights into biology, for example of drug resistance in tumours and biofilms; 3) skills training of post-graduate and post-doctoral researchers, enhancing their employability in academe, industry and elsewhere; 4) inter-disciplinary research, including mathematical biology which will be enhance by the quantitative data that may be extracted from LSFM data-sets. The data produced by the LSFM will often be best-presented as movies, and consequently they are often readily accessible to the public, not to mention exciting to watch. Our BBSRC ALERT18 bid will be announced to the public and research outputs disseminated through a range of public engagement activities.
Start Year 2019
 
Description NBIC Accession 1 (May 2018) 
Organisation Imperial College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation Plymouth Marine Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation Quadram Institute Bioscience
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation Queen's University Belfast
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Cambridge
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Dundee
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Leeds
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Portsmouth
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 1 (May 2018) 
Organisation University of the West of England
Country United Kingdom 
Sector Academic/University 
PI Contribution Sixteen Research Institutions joined the NBIC consortium. University of Southampton University of Nottingham University of Liverpool University of Edinburgh Quadram Institute Bioscience University of Portsmouth University of Leeds Plymouth Marine Laboratory University of the West of England, Bristol University of Sheffield University of Dundee Imperial College London University of Birmingham University of Hull Queens University Belfast University of Cambridge
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation Cardiff University
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation James Hutton Institute
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation Liverpool John Moores University
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation Manchester Metropolitan University
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation Nottingham Trent University
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation Swansea University
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation University of Bath
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation University of Kent
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation University of Manchester
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation University of Oxford
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation University of St Andrews
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation University of Surrey
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 2 (August 2018) 
Organisation University of Warwick
Country United Kingdom 
Sector Academic/University 
PI Contribution We welcomed 15 new Research Institutions to the NBIC consortium, bringing NBIC acceded Research Institutions to a total of 31 and increasing our coverage across the UK. Our new joiners are: University of St Andrews Newcastle University Cardiff University Manchester Metropolitan University University of Oxford University of Manchester University of Swansea University of Warwick University of Kent University of Bath University of Glasgow The University of Surrey Nottingham Trent University Liverpool John Moore's University James Hutton Institute
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2018
 
Description NBIC Accession 3 (30 January 2020) 
Organisation Canterbury Christ Church University
Country United Kingdom 
Sector Academic/University 
PI Contribution We are delighted to share that NBIC is now a consortium of 52 UK Research Institutes. On 30th January 2020 we had our 4th Accession Day. This is when new Research Institutes/Universities and current Partners sign the NBIC Accession Agreement, and in doing, so agree to be bound by the Consortium Agreement. Our new partners are: Canterbury Christ Church University De Montfort University University of Exeter Lancaster University Earlham Institute University of Keele The University of Sussex
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2020
 
Description NBIC Accession 3 (30 January 2020) 
Organisation De Montfort University
Country United Kingdom 
Sector Academic/University 
PI Contribution We are delighted to share that NBIC is now a consortium of 52 UK Research Institutes. On 30th January 2020 we had our 4th Accession Day. This is when new Research Institutes/Universities and current Partners sign the NBIC Accession Agreement, and in doing, so agree to be bound by the Consortium Agreement. Our new partners are: Canterbury Christ Church University De Montfort University University of Exeter Lancaster University Earlham Institute University of Keele The University of Sussex
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2020
 
Description NBIC Accession 3 (30 January 2020) 
Organisation Earlham Institute
Country United Kingdom 
Sector Academic/University 
PI Contribution We are delighted to share that NBIC is now a consortium of 52 UK Research Institutes. On 30th January 2020 we had our 4th Accession Day. This is when new Research Institutes/Universities and current Partners sign the NBIC Accession Agreement, and in doing, so agree to be bound by the Consortium Agreement. Our new partners are: Canterbury Christ Church University De Montfort University University of Exeter Lancaster University Earlham Institute University of Keele The University of Sussex
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2020
 
Description NBIC Accession 3 (30 January 2020) 
Organisation Keele University
Country United Kingdom 
Sector Academic/University 
PI Contribution We are delighted to share that NBIC is now a consortium of 52 UK Research Institutes. On 30th January 2020 we had our 4th Accession Day. This is when new Research Institutes/Universities and current Partners sign the NBIC Accession Agreement, and in doing, so agree to be bound by the Consortium Agreement. Our new partners are: Canterbury Christ Church University De Montfort University University of Exeter Lancaster University Earlham Institute University of Keele The University of Sussex
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2020
 
Description NBIC Accession 3 (30 January 2020) 
Organisation Lancaster University
Country United Kingdom 
Sector Academic/University 
PI Contribution We are delighted to share that NBIC is now a consortium of 52 UK Research Institutes. On 30th January 2020 we had our 4th Accession Day. This is when new Research Institutes/Universities and current Partners sign the NBIC Accession Agreement, and in doing, so agree to be bound by the Consortium Agreement. Our new partners are: Canterbury Christ Church University De Montfort University University of Exeter Lancaster University Earlham Institute University of Keele The University of Sussex
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2020
 
Description NBIC Accession 3 (30 January 2020) 
Organisation University of Exeter
Country United Kingdom 
Sector Academic/University 
PI Contribution We are delighted to share that NBIC is now a consortium of 52 UK Research Institutes. On 30th January 2020 we had our 4th Accession Day. This is when new Research Institutes/Universities and current Partners sign the NBIC Accession Agreement, and in doing, so agree to be bound by the Consortium Agreement. Our new partners are: Canterbury Christ Church University De Montfort University University of Exeter Lancaster University Earlham Institute University of Keele The University of Sussex
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2020
 
Description NBIC Accession 3 (30 January 2020) 
Organisation University of Sussex
Country United Kingdom 
Sector Academic/University 
PI Contribution We are delighted to share that NBIC is now a consortium of 52 UK Research Institutes. On 30th January 2020 we had our 4th Accession Day. This is when new Research Institutes/Universities and current Partners sign the NBIC Accession Agreement, and in doing, so agree to be bound by the Consortium Agreement. Our new partners are: Canterbury Christ Church University De Montfort University University of Exeter Lancaster University Earlham Institute University of Keele The University of Sussex
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2020
 
Description NBIC Accession 3 (June 2019) 
Organisation Aberystwyth University
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation Aston University
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation Barts Health NHS Trust
Country United Kingdom 
Sector Public 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation British Geological Survey
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation Cranfield University
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation Edinburgh Napier University
Department The University Court of Edinburgh Napier University
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation Heriot-Watt University
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation King's College London
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation Queen Mary University of London
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation University of Bradford
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation University of Bristol
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation University of East Anglia
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation University of Huddersfield
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 3 (June 2019) 
Organisation University of York
Country United Kingdom 
Sector Academic/University 
PI Contribution The team along with the relevant members of our research partner's organisations have completed our 3rd wave of accession to NBIC and we are excited that an additional 14 research institutions are joining NBIC. This will bring us to 45 members in total! We warmly welcome all our new members. We are proud to have such a broad, collaborative and supportive community, all of whom are aiming to move ahead with industry in the exploitation of strengths in biofilm research to the benefit of the UK. Our 14 new joiners are: British Geological Survey Cranfield University Loughborough University Queen Mary University of London / Barts Health NHS Trust University of Bradford University of Bristol University of Huddersfield University of York University of Aston University of East Anglia Aberystwyth University Heriot-Watt University The Court of Edinburgh Napier University King's College London We are now 45 Research Institutions.
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders.
Start Year 2019
 
Description NBIC Accession 4 (23 February 2021) 
Organisation Brunel University London
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation Durham University
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation Glasgow Caledonian University
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation Liverpool School of Tropical Medicine
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation Sheffield Hallam University
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation Teesside University
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation University of Aberdeen
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation University of Essex
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation University of Hertfordshire
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation University of Lincoln
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation University of Strathclyde
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC Accession 4 (23 February 2021) 
Organisation University of the Highlands and Islands
Country United Kingdom 
Sector Academic/University 
PI Contribution 12 institutions acceded to NBIC in February 2021 bringing the consortium to 64 partner research institutions. Brunel University London Durham University Glasgow Caledonian University Liverpool School of Tropical Medicine Sheffield Hallam University Teesside University University of Aberdeen University of Essex University of Hertfordshire University of Lincoln University of Strathclyde University of the Highlands and Islands
Collaborator Contribution Contributions to our network of stakeholders.
Impact Contributions to our network of stakeholders. We anticipate applications for our fourth proof of concept funding call.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_070 Bioinspired Antimicrobial Surfaces (Andrew Parnell) 
Organisation Farapack Polymers
Country United Kingdom 
Sector Private 
PI Contribution Cicada wing surfaces [a] use some as yet unknown physical-mechanical property of the wing surface nanostructure to make them bactericidal. The surface nanostructure is actively killing the bacteria, without the release of a chemical, possibly by puncturing the Bacterial wall. We plan to use this same physical mechanism as a way to kill bacteria and limit the spread of bacteria. Our approach is to use low cost plastic materials that are patterned with a similar surface as is on the cicada. We have already made suitable nano-patterned negative print surfaces in our labs at Sheffield. Our aims in this FTMA fellowship are 1) To test a number of polymer materials as nanostructured surfaces to see if they are effective against colonisation by clinically relevant bacterial strains. This will be using colony forming unit (CFU) counts and live-dead stain fluorescence imaging. This is in collaboration with my colleague Dr Rebecca Corrigan also at Sheffield. Our project is in collaboration with Farapack Polymers Ltd, the PDRA will work with Farapack for the duration of the project. 2) Farapack will help in the development of a prototype nanostructured polymer surface, primarily by helping to screen a number of potential commercial polymer materials that can be manufactured at scale. They have committed £7000 on their side as part of this proof of concept project (see supporting letter), this will involve ongoing development meetings and supply of materials. In later stages they will help by using their extensive existing industrial network to setup and facilitate commercial links. Our project aligns with the NIBIC themes of preventing and managing biofilms, and the themes of transforming foundation industries and leading-edge healthcare. Ivanova, E. P. et al. Natural Bactericidal Surfaces: Mechanical Rupture of Pseudomonas aeruginosa Cells by Cicada Wings. Small 8, 2489-2494 (2012).
Collaborator Contribution We plan to demonstrate the efficacy of antibacterial polymer surfaces that can be made at scale using existing FDA approved materials which mean that this technology could be adopted in a number of clinical settings. We hope to generate IP as one outcome, Dr Parnell has done this before, so has experience of not disclosing information into the public domain along with keeping an audited track of the invention process. The new venture with Farapack will hopefully lead to a number of potential large multinational companies that have the appropriate manufacturing capability to make such a surface. Dr Parnell is currently preparing a UKRI future leaders fellowship in the area of bio-inspired technologies. Studying the mechanism underlying bacterial death on nano-structured surfaces from a fundamental level forms a major part of the fellowship. Publications will stem from a number of different aspects: 1) Firstly understanding the mechanism of action on cicada wings, this will involve a series of in-situ experiments constantly monitoring the membrane and lipid layers. Using naturally fluorescent bacteria will make it possible to see if there is a single burst response or if the mechanism is more subtle. 2) Replication of the biological nanostructure on optimised nano-structured polymer surfaces, provided that we have first patent protected a number of key findings that will help to validate how these surfaces work when they interact with bacteria along with how to optimise them further.
Impact We now have a much better insight into how polymer stiffness plays a role in modulating the killing efficiency. It is an important parameter that must be optimised by the appropriate choice of polymer used to make the nanostructured surface. The link between stiffness and can alter the killing efficiency from near ~ 50-60% down to 20%. This knowledge is important and has helped the team to open discussions with suitable potential commercial partners about this work with the aim of taking it from the lab to a more technology ready state and hopefully to becoming a product. Our discussions with companies are ongoing and may lead to further funding or testing of specific materials. We have also received Impact acceleration account (IAA) funding to further progress the work, this is via the University of Sheffield. Dr Parnell has also applied for a UKRI future leaders fellowship (round 6) part of which concerns further development and commercialisation of antibacterial nanostructured surfaces, this will be decided upon by Jan/Feb 2022. The team also plan to apply for subsequent funding from either the MRC or the BBSRC. Subject to IP considerations we intend to publish this work and will give credit to the NBIC funding for its pivotal role in helping us to understand the role of materials mechanics in making more effective antibacterial surfaces.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_070 Bioinspired Antimicrobial Surfaces (Andrew Parnell) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Cicada wing surfaces [a] use some as yet unknown physical-mechanical property of the wing surface nanostructure to make them bactericidal. The surface nanostructure is actively killing the bacteria, without the release of a chemical, possibly by puncturing the Bacterial wall. We plan to use this same physical mechanism as a way to kill bacteria and limit the spread of bacteria. Our approach is to use low cost plastic materials that are patterned with a similar surface as is on the cicada. We have already made suitable nano-patterned negative print surfaces in our labs at Sheffield. Our aims in this FTMA fellowship are 1) To test a number of polymer materials as nanostructured surfaces to see if they are effective against colonisation by clinically relevant bacterial strains. This will be using colony forming unit (CFU) counts and live-dead stain fluorescence imaging. This is in collaboration with my colleague Dr Rebecca Corrigan also at Sheffield. Our project is in collaboration with Farapack Polymers Ltd, the PDRA will work with Farapack for the duration of the project. 2) Farapack will help in the development of a prototype nanostructured polymer surface, primarily by helping to screen a number of potential commercial polymer materials that can be manufactured at scale. They have committed £7000 on their side as part of this proof of concept project (see supporting letter), this will involve ongoing development meetings and supply of materials. In later stages they will help by using their extensive existing industrial network to setup and facilitate commercial links. Our project aligns with the NIBIC themes of preventing and managing biofilms, and the themes of transforming foundation industries and leading-edge healthcare. Ivanova, E. P. et al. Natural Bactericidal Surfaces: Mechanical Rupture of Pseudomonas aeruginosa Cells by Cicada Wings. Small 8, 2489-2494 (2012).
Collaborator Contribution We plan to demonstrate the efficacy of antibacterial polymer surfaces that can be made at scale using existing FDA approved materials which mean that this technology could be adopted in a number of clinical settings. We hope to generate IP as one outcome, Dr Parnell has done this before, so has experience of not disclosing information into the public domain along with keeping an audited track of the invention process. The new venture with Farapack will hopefully lead to a number of potential large multinational companies that have the appropriate manufacturing capability to make such a surface. Dr Parnell is currently preparing a UKRI future leaders fellowship in the area of bio-inspired technologies. Studying the mechanism underlying bacterial death on nano-structured surfaces from a fundamental level forms a major part of the fellowship. Publications will stem from a number of different aspects: 1) Firstly understanding the mechanism of action on cicada wings, this will involve a series of in-situ experiments constantly monitoring the membrane and lipid layers. Using naturally fluorescent bacteria will make it possible to see if there is a single burst response or if the mechanism is more subtle. 2) Replication of the biological nanostructure on optimised nano-structured polymer surfaces, provided that we have first patent protected a number of key findings that will help to validate how these surfaces work when they interact with bacteria along with how to optimise them further.
Impact We now have a much better insight into how polymer stiffness plays a role in modulating the killing efficiency. It is an important parameter that must be optimised by the appropriate choice of polymer used to make the nanostructured surface. The link between stiffness and can alter the killing efficiency from near ~ 50-60% down to 20%. This knowledge is important and has helped the team to open discussions with suitable potential commercial partners about this work with the aim of taking it from the lab to a more technology ready state and hopefully to becoming a product. Our discussions with companies are ongoing and may lead to further funding or testing of specific materials. We have also received Impact acceleration account (IAA) funding to further progress the work, this is via the University of Sheffield. Dr Parnell has also applied for a UKRI future leaders fellowship (round 6) part of which concerns further development and commercialisation of antibacterial nanostructured surfaces, this will be decided upon by Jan/Feb 2022. The team also plan to apply for subsequent funding from either the MRC or the BBSRC. Subject to IP considerations we intend to publish this work and will give credit to the NBIC funding for its pivotal role in helping us to understand the role of materials mechanics in making more effective antibacterial surfaces.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_070 Bioinspired Antimicrobial Surfaces (Andrew Parnell) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Cicada wing surfaces [a] use some as yet unknown physical-mechanical property of the wing surface nanostructure to make them bactericidal. The surface nanostructure is actively killing the bacteria, without the release of a chemical, possibly by puncturing the Bacterial wall. We plan to use this same physical mechanism as a way to kill bacteria and limit the spread of bacteria. Our approach is to use low cost plastic materials that are patterned with a similar surface as is on the cicada. We have already made suitable nano-patterned negative print surfaces in our labs at Sheffield. Our aims in this FTMA fellowship are 1) To test a number of polymer materials as nanostructured surfaces to see if they are effective against colonisation by clinically relevant bacterial strains. This will be using colony forming unit (CFU) counts and live-dead stain fluorescence imaging. This is in collaboration with my colleague Dr Rebecca Corrigan also at Sheffield. Our project is in collaboration with Farapack Polymers Ltd, the PDRA will work with Farapack for the duration of the project. 2) Farapack will help in the development of a prototype nanostructured polymer surface, primarily by helping to screen a number of potential commercial polymer materials that can be manufactured at scale. They have committed £7000 on their side as part of this proof of concept project (see supporting letter), this will involve ongoing development meetings and supply of materials. In later stages they will help by using their extensive existing industrial network to setup and facilitate commercial links. Our project aligns with the NIBIC themes of preventing and managing biofilms, and the themes of transforming foundation industries and leading-edge healthcare. Ivanova, E. P. et al. Natural Bactericidal Surfaces: Mechanical Rupture of Pseudomonas aeruginosa Cells by Cicada Wings. Small 8, 2489-2494 (2012).
Collaborator Contribution We plan to demonstrate the efficacy of antibacterial polymer surfaces that can be made at scale using existing FDA approved materials which mean that this technology could be adopted in a number of clinical settings. We hope to generate IP as one outcome, Dr Parnell has done this before, so has experience of not disclosing information into the public domain along with keeping an audited track of the invention process. The new venture with Farapack will hopefully lead to a number of potential large multinational companies that have the appropriate manufacturing capability to make such a surface. Dr Parnell is currently preparing a UKRI future leaders fellowship in the area of bio-inspired technologies. Studying the mechanism underlying bacterial death on nano-structured surfaces from a fundamental level forms a major part of the fellowship. Publications will stem from a number of different aspects: 1) Firstly understanding the mechanism of action on cicada wings, this will involve a series of in-situ experiments constantly monitoring the membrane and lipid layers. Using naturally fluorescent bacteria will make it possible to see if there is a single burst response or if the mechanism is more subtle. 2) Replication of the biological nanostructure on optimised nano-structured polymer surfaces, provided that we have first patent protected a number of key findings that will help to validate how these surfaces work when they interact with bacteria along with how to optimise them further.
Impact We now have a much better insight into how polymer stiffness plays a role in modulating the killing efficiency. It is an important parameter that must be optimised by the appropriate choice of polymer used to make the nanostructured surface. The link between stiffness and can alter the killing efficiency from near ~ 50-60% down to 20%. This knowledge is important and has helped the team to open discussions with suitable potential commercial partners about this work with the aim of taking it from the lab to a more technology ready state and hopefully to becoming a product. Our discussions with companies are ongoing and may lead to further funding or testing of specific materials. We have also received Impact acceleration account (IAA) funding to further progress the work, this is via the University of Sheffield. Dr Parnell has also applied for a UKRI future leaders fellowship (round 6) part of which concerns further development and commercialisation of antibacterial nanostructured surfaces, this will be decided upon by Jan/Feb 2022. The team also plan to apply for subsequent funding from either the MRC or the BBSRC. Subject to IP considerations we intend to publish this work and will give credit to the NBIC funding for its pivotal role in helping us to understand the role of materials mechanics in making more effective antibacterial surfaces.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_074 Engineering synthetic biofilm for improving energy efficiency in wastewater treatment (Yuxiu Chen) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of this secondment is to explore the potential application of our newly developed material, called biocoating, in wastewater treatment. Biocoating is an engineered biofilm that consists of a synthetic polymeric matrix combined with encapsulated bacteria. The two major advantages of biocoating are that the bacterial population is controlled and there is good diffusion through the matrix, which potentially offers a solution to some of the challenges in conventional biofilm bioreactors. This project will act as a proof-of-concept study and initiate a potential long-term collaboration with Novozymes, a global leader in providing biological solutions for wastewater treatment. This project offers a potential means to reduce the carbon emissions associated with the wastewater industry by facilitating significant energy savings. Wastewater treatment is responsible for approximately 2% of a country's total electricity consumption with most of this energy used for aeration and solids separation with centrifugation, both of which are related to the biological wastewater treatment process. Therefore, there is considerable interest from the industry to develop and employ new technologies to reduce the overall energy consumption of wastewater treatment. My initial research focused on developing and characterising new biocoating materials. As this progressed, I recognised the potential application for biocoatings in wastewater treatment. However, as our research team consists only of physicists and microbiologists, we do not have a strong connection to the wastewater industry. As the postdoctoral researcher of the team, I am eagerly exploring this application in wastewater treatment by seeking collaboration with a strong industrial partner. This potential collaboration with Novozymes provides a perfect opportunity for me to work with experts in wastewater treatment and understand the state-of-the-art of the industry. The valuable knowledge and potential long-term collaboration gained from this secondment will guide me in my future research in developing biocoatings for real-world applications.
Collaborator Contribution There are two key results that we want to achieve in this three-month project. Firstly, we will, for the first time, encapsulate commercial bacterial products in our biocoating. Previously, we have only had experience with encapsulating E.coli, which acted as a model system for our research. In this project, mixed-culture bacteria that are commercially used for wastewater treatment bioaugmentation will be encapsulated. The bacteria will be provided by Novozymes. This would represent a huge step in the research of our biocoating as it would represent not only the application of commercially interesting bacteria, but would also provide experience around the viability of mixed culture communities in the biocoating. The viability and reactivity of the bacteria in the biocoating will be a key measure for this part of the study, which will be characterised both in our lab and in Novozymes' lab. Secondly, we will coat our biocoatings on large substrates that can be tested directly in a lab-scale bioreactor. The bioreactor used for this study will be a 1 L lab-scale model of a rotating biological contactor (RBC) in Novozymes' lab. The reason RBC is chosen for this study is because it is commercially available, easily scalable and most importantly, energy efficient (as no aeration is needed). Fibrous substrates will be used to provide good diffusion from both sides of our biocoatings. Disc-shape substrates will be coated with biocoatings in our lab and shipped to Novozymes' lab for testing the reactivity of the encapsulated bacterial products using RBC. In this three-month period of collaboration, Novozymes will share their knowledge on wastewater treatment as well as their lab facilities for testing the reactivity of our biocoatings. We will share our knowledge on bacteria encapsulation and prepare samples for them for testing. We will maintain regular contact through video-meetings. I plan to visit Novozymes' lab for demonstrations and discussions, provided that the Covid pandemic eases before the end of the project. If the results of this proof-of-concept study are promising, that is to say our biocoating has a reasonable reactivity when tested in the RBC, Novozymes will be very likely to establish a long-term collaboration with us to further investigate the application of biocoating in wastewater treatment. While an agreement is still under discussion, it is also possible that we will be able develop collaborative IP and publish this work in a relevant journal if the results are positive.
Impact Feedback from University of Surrey: 1. The project team from Surrey and Novozymes met bi-weekly to track progress and to make plans. Novozymes made two shipments of Prawnbac bacteria to the Surrey labs. We learnt from Novozymes their standard procedure of characterising the reactivity of the nitrifying bacteria (in suspension). We adapted this procedure for characterising the reactivity of nitrifying bacteria immobilised in our biocoatings. Dr Chen built a small lab-scale bioreactor, which he used to study the reactivity of our biocoatings. Using the bacteria and characterisation method provided by Novozymes, he characterised the biocoatings according to an industrial standard. 2. Using the procedure described above, Dr Chen characterised the reactivity of biocoatings fabricated with six different combinations of porous substrates and film formation processes. One trial with carbon paper substrates and a short film formation time showed promising reactivity (181 mg NH4-N produced/L/h). SEM study showed that bacteria were embedded inside the biocoatings after the film formation. Once rehydrated, these embedded bacteria acted as anchoring/initiation sites for natural biofilm growth on the surface of the biocoatings (Figure 1). This study validated the concept of applying our biocoatings to immobilise a commercial nitrifier and opened up possibilities for future commercial biocoating bioreactors. The potential benefits of biocoating bioreactors include a shortened process start-up stage, protection against the failure of biofilms, protection of sensitive nitrifier populations to inhibition, and the potential to intensify wastewater nitrification processes, all of which are of great interest to Novozymes. 3. We realised that the poor desiccation tolerance of Prawnbac limited the survivability of bacteria during the film formation process of the biocoating, which is conventionally a desiccation process. We proposed a new concept of film formation via the method of "wet sintering", which does not require desiccation during polymer particle coalescence as part of the film formation process. This proof-of-concept experiment started near the end of this NBIC fellowship, and is still ongoing at the time this report is being written. Our collaborator from Novozymes was impressed by the versatility of our biocoatings and the ability we have to adapt our biocoatings. 4. Novozymes has gained a better insight into the characteristics of their own product and how it responds under the conditions of film formation. They had not previously performed scanning electron microscopy on their product and its biofilm. Hence, the characterisation gave them a valuable insight. Next steps: We will continue our collaboration with Novozymes, to study our biocoatings using the bacteria Novozymes provided us. We plan to ship biocoatings from Surrey to Novozymes for them to analyse in their application, using specialised microbial analysis methods such as FISH and qPCR. Our current focus is to develop our concept of film formation of biocoatings without desiccation, which aligns perfectly with our ongoing project on biocoatings and fits our expertise as materials physicists. Novozymes also shows interest in this concept, as it offers a unique solution to immobilise their desiccation sensitive bacteria. We will apply for grants together with Novozymes to continue our research on this project. We have identified the Novo Nordisk Foundation as a possible source of follow-on funding. An alternative source of funding is through the BBSRC Engineering Biology programme.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_074 Engineering synthetic biofilm for improving energy efficiency in wastewater treatment (Yuxiu Chen) 
Organisation Novozymes
Country Denmark 
Sector Public 
PI Contribution The aim of this secondment is to explore the potential application of our newly developed material, called biocoating, in wastewater treatment. Biocoating is an engineered biofilm that consists of a synthetic polymeric matrix combined with encapsulated bacteria. The two major advantages of biocoating are that the bacterial population is controlled and there is good diffusion through the matrix, which potentially offers a solution to some of the challenges in conventional biofilm bioreactors. This project will act as a proof-of-concept study and initiate a potential long-term collaboration with Novozymes, a global leader in providing biological solutions for wastewater treatment. This project offers a potential means to reduce the carbon emissions associated with the wastewater industry by facilitating significant energy savings. Wastewater treatment is responsible for approximately 2% of a country's total electricity consumption with most of this energy used for aeration and solids separation with centrifugation, both of which are related to the biological wastewater treatment process. Therefore, there is considerable interest from the industry to develop and employ new technologies to reduce the overall energy consumption of wastewater treatment. My initial research focused on developing and characterising new biocoating materials. As this progressed, I recognised the potential application for biocoatings in wastewater treatment. However, as our research team consists only of physicists and microbiologists, we do not have a strong connection to the wastewater industry. As the postdoctoral researcher of the team, I am eagerly exploring this application in wastewater treatment by seeking collaboration with a strong industrial partner. This potential collaboration with Novozymes provides a perfect opportunity for me to work with experts in wastewater treatment and understand the state-of-the-art of the industry. The valuable knowledge and potential long-term collaboration gained from this secondment will guide me in my future research in developing biocoatings for real-world applications.
Collaborator Contribution There are two key results that we want to achieve in this three-month project. Firstly, we will, for the first time, encapsulate commercial bacterial products in our biocoating. Previously, we have only had experience with encapsulating E.coli, which acted as a model system for our research. In this project, mixed-culture bacteria that are commercially used for wastewater treatment bioaugmentation will be encapsulated. The bacteria will be provided by Novozymes. This would represent a huge step in the research of our biocoating as it would represent not only the application of commercially interesting bacteria, but would also provide experience around the viability of mixed culture communities in the biocoating. The viability and reactivity of the bacteria in the biocoating will be a key measure for this part of the study, which will be characterised both in our lab and in Novozymes' lab. Secondly, we will coat our biocoatings on large substrates that can be tested directly in a lab-scale bioreactor. The bioreactor used for this study will be a 1 L lab-scale model of a rotating biological contactor (RBC) in Novozymes' lab. The reason RBC is chosen for this study is because it is commercially available, easily scalable and most importantly, energy efficient (as no aeration is needed). Fibrous substrates will be used to provide good diffusion from both sides of our biocoatings. Disc-shape substrates will be coated with biocoatings in our lab and shipped to Novozymes' lab for testing the reactivity of the encapsulated bacterial products using RBC. In this three-month period of collaboration, Novozymes will share their knowledge on wastewater treatment as well as their lab facilities for testing the reactivity of our biocoatings. We will share our knowledge on bacteria encapsulation and prepare samples for them for testing. We will maintain regular contact through video-meetings. I plan to visit Novozymes' lab for demonstrations and discussions, provided that the Covid pandemic eases before the end of the project. If the results of this proof-of-concept study are promising, that is to say our biocoating has a reasonable reactivity when tested in the RBC, Novozymes will be very likely to establish a long-term collaboration with us to further investigate the application of biocoating in wastewater treatment. While an agreement is still under discussion, it is also possible that we will be able develop collaborative IP and publish this work in a relevant journal if the results are positive.
Impact Feedback from University of Surrey: 1. The project team from Surrey and Novozymes met bi-weekly to track progress and to make plans. Novozymes made two shipments of Prawnbac bacteria to the Surrey labs. We learnt from Novozymes their standard procedure of characterising the reactivity of the nitrifying bacteria (in suspension). We adapted this procedure for characterising the reactivity of nitrifying bacteria immobilised in our biocoatings. Dr Chen built a small lab-scale bioreactor, which he used to study the reactivity of our biocoatings. Using the bacteria and characterisation method provided by Novozymes, he characterised the biocoatings according to an industrial standard. 2. Using the procedure described above, Dr Chen characterised the reactivity of biocoatings fabricated with six different combinations of porous substrates and film formation processes. One trial with carbon paper substrates and a short film formation time showed promising reactivity (181 mg NH4-N produced/L/h). SEM study showed that bacteria were embedded inside the biocoatings after the film formation. Once rehydrated, these embedded bacteria acted as anchoring/initiation sites for natural biofilm growth on the surface of the biocoatings (Figure 1). This study validated the concept of applying our biocoatings to immobilise a commercial nitrifier and opened up possibilities for future commercial biocoating bioreactors. The potential benefits of biocoating bioreactors include a shortened process start-up stage, protection against the failure of biofilms, protection of sensitive nitrifier populations to inhibition, and the potential to intensify wastewater nitrification processes, all of which are of great interest to Novozymes. 3. We realised that the poor desiccation tolerance of Prawnbac limited the survivability of bacteria during the film formation process of the biocoating, which is conventionally a desiccation process. We proposed a new concept of film formation via the method of "wet sintering", which does not require desiccation during polymer particle coalescence as part of the film formation process. This proof-of-concept experiment started near the end of this NBIC fellowship, and is still ongoing at the time this report is being written. Our collaborator from Novozymes was impressed by the versatility of our biocoatings and the ability we have to adapt our biocoatings. 4. Novozymes has gained a better insight into the characteristics of their own product and how it responds under the conditions of film formation. They had not previously performed scanning electron microscopy on their product and its biofilm. Hence, the characterisation gave them a valuable insight. Next steps: We will continue our collaboration with Novozymes, to study our biocoatings using the bacteria Novozymes provided us. We plan to ship biocoatings from Surrey to Novozymes for them to analyse in their application, using specialised microbial analysis methods such as FISH and qPCR. Our current focus is to develop our concept of film formation of biocoatings without desiccation, which aligns perfectly with our ongoing project on biocoatings and fits our expertise as materials physicists. Novozymes also shows interest in this concept, as it offers a unique solution to immobilise their desiccation sensitive bacteria. We will apply for grants together with Novozymes to continue our research on this project. We have identified the Novo Nordisk Foundation as a possible source of follow-on funding. An alternative source of funding is through the BBSRC Engineering Biology programme.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_074 Engineering synthetic biofilm for improving energy efficiency in wastewater treatment (Yuxiu Chen) 
Organisation University of Surrey
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of this secondment is to explore the potential application of our newly developed material, called biocoating, in wastewater treatment. Biocoating is an engineered biofilm that consists of a synthetic polymeric matrix combined with encapsulated bacteria. The two major advantages of biocoating are that the bacterial population is controlled and there is good diffusion through the matrix, which potentially offers a solution to some of the challenges in conventional biofilm bioreactors. This project will act as a proof-of-concept study and initiate a potential long-term collaboration with Novozymes, a global leader in providing biological solutions for wastewater treatment. This project offers a potential means to reduce the carbon emissions associated with the wastewater industry by facilitating significant energy savings. Wastewater treatment is responsible for approximately 2% of a country's total electricity consumption with most of this energy used for aeration and solids separation with centrifugation, both of which are related to the biological wastewater treatment process. Therefore, there is considerable interest from the industry to develop and employ new technologies to reduce the overall energy consumption of wastewater treatment. My initial research focused on developing and characterising new biocoating materials. As this progressed, I recognised the potential application for biocoatings in wastewater treatment. However, as our research team consists only of physicists and microbiologists, we do not have a strong connection to the wastewater industry. As the postdoctoral researcher of the team, I am eagerly exploring this application in wastewater treatment by seeking collaboration with a strong industrial partner. This potential collaboration with Novozymes provides a perfect opportunity for me to work with experts in wastewater treatment and understand the state-of-the-art of the industry. The valuable knowledge and potential long-term collaboration gained from this secondment will guide me in my future research in developing biocoatings for real-world applications.
Collaborator Contribution There are two key results that we want to achieve in this three-month project. Firstly, we will, for the first time, encapsulate commercial bacterial products in our biocoating. Previously, we have only had experience with encapsulating E.coli, which acted as a model system for our research. In this project, mixed-culture bacteria that are commercially used for wastewater treatment bioaugmentation will be encapsulated. The bacteria will be provided by Novozymes. This would represent a huge step in the research of our biocoating as it would represent not only the application of commercially interesting bacteria, but would also provide experience around the viability of mixed culture communities in the biocoating. The viability and reactivity of the bacteria in the biocoating will be a key measure for this part of the study, which will be characterised both in our lab and in Novozymes' lab. Secondly, we will coat our biocoatings on large substrates that can be tested directly in a lab-scale bioreactor. The bioreactor used for this study will be a 1 L lab-scale model of a rotating biological contactor (RBC) in Novozymes' lab. The reason RBC is chosen for this study is because it is commercially available, easily scalable and most importantly, energy efficient (as no aeration is needed). Fibrous substrates will be used to provide good diffusion from both sides of our biocoatings. Disc-shape substrates will be coated with biocoatings in our lab and shipped to Novozymes' lab for testing the reactivity of the encapsulated bacterial products using RBC. In this three-month period of collaboration, Novozymes will share their knowledge on wastewater treatment as well as their lab facilities for testing the reactivity of our biocoatings. We will share our knowledge on bacteria encapsulation and prepare samples for them for testing. We will maintain regular contact through video-meetings. I plan to visit Novozymes' lab for demonstrations and discussions, provided that the Covid pandemic eases before the end of the project. If the results of this proof-of-concept study are promising, that is to say our biocoating has a reasonable reactivity when tested in the RBC, Novozymes will be very likely to establish a long-term collaboration with us to further investigate the application of biocoating in wastewater treatment. While an agreement is still under discussion, it is also possible that we will be able develop collaborative IP and publish this work in a relevant journal if the results are positive.
Impact Feedback from University of Surrey: 1. The project team from Surrey and Novozymes met bi-weekly to track progress and to make plans. Novozymes made two shipments of Prawnbac bacteria to the Surrey labs. We learnt from Novozymes their standard procedure of characterising the reactivity of the nitrifying bacteria (in suspension). We adapted this procedure for characterising the reactivity of nitrifying bacteria immobilised in our biocoatings. Dr Chen built a small lab-scale bioreactor, which he used to study the reactivity of our biocoatings. Using the bacteria and characterisation method provided by Novozymes, he characterised the biocoatings according to an industrial standard. 2. Using the procedure described above, Dr Chen characterised the reactivity of biocoatings fabricated with six different combinations of porous substrates and film formation processes. One trial with carbon paper substrates and a short film formation time showed promising reactivity (181 mg NH4-N produced/L/h). SEM study showed that bacteria were embedded inside the biocoatings after the film formation. Once rehydrated, these embedded bacteria acted as anchoring/initiation sites for natural biofilm growth on the surface of the biocoatings (Figure 1). This study validated the concept of applying our biocoatings to immobilise a commercial nitrifier and opened up possibilities for future commercial biocoating bioreactors. The potential benefits of biocoating bioreactors include a shortened process start-up stage, protection against the failure of biofilms, protection of sensitive nitrifier populations to inhibition, and the potential to intensify wastewater nitrification processes, all of which are of great interest to Novozymes. 3. We realised that the poor desiccation tolerance of Prawnbac limited the survivability of bacteria during the film formation process of the biocoating, which is conventionally a desiccation process. We proposed a new concept of film formation via the method of "wet sintering", which does not require desiccation during polymer particle coalescence as part of the film formation process. This proof-of-concept experiment started near the end of this NBIC fellowship, and is still ongoing at the time this report is being written. Our collaborator from Novozymes was impressed by the versatility of our biocoatings and the ability we have to adapt our biocoatings. 4. Novozymes has gained a better insight into the characteristics of their own product and how it responds under the conditions of film formation. They had not previously performed scanning electron microscopy on their product and its biofilm. Hence, the characterisation gave them a valuable insight. Next steps: We will continue our collaboration with Novozymes, to study our biocoatings using the bacteria Novozymes provided us. We plan to ship biocoatings from Surrey to Novozymes for them to analyse in their application, using specialised microbial analysis methods such as FISH and qPCR. Our current focus is to develop our concept of film formation of biocoatings without desiccation, which aligns perfectly with our ongoing project on biocoatings and fits our expertise as materials physicists. Novozymes also shows interest in this concept, as it offers a unique solution to immobilise their desiccation sensitive bacteria. We will apply for grants together with Novozymes to continue our research on this project. We have identified the Novo Nordisk Foundation as a possible source of follow-on funding. An alternative source of funding is through the BBSRC Engineering Biology programme.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_079 Development of biofilm inhibition testing to the ASTM standard for implanted medical devices (Vanina Garcia Altamirano) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The primary ambition of this project is to develop biofilm testing capabilities in the Medical Technologies Innovation Facility (MTIF) to develop their portfolio to include standardised biofilm testing services for academics and industrial clients that wish to test developing medical device materials for biofilm inhibition properties to the American Society for Testing and Materials (ASTM) standard for implanted medical devices. Secondary aims are to develop standard operating procedures (SOPs) for several simple biofilm assays that can be utilised by MTIF as further services. This will support my personal development by providing experience of grant capture as well as working in the industrial sector. This fellowship will develop my commercial awareness, through my involvement in setting up a commercial laboratory and SOPs to the ASTM standard. This is experience that is difficult to gain through academic research alone and will mean that I am able to work effectively within these environments and in collaborations with industrial partners in the future, which is a vital part of bridging the gap between fundamental research and real-world application. This project aligns to the challenges "Leading-edge healthcare" and the "Healthy Ageing" outlined in the Industry Strategy Challenge Fund. Aging populations increasingly require implantable medical devices for improved quality of life and in treatment of disease. As biofilm infection is a leading cause of failure of these devices, the development of anti-biofilm medical materials is critical for the improvement of quality life for millions, having standardised biofilm testing services available in the region to test developing medical device materials provides researchers and commercial developers access to reliable and robust testing of new medical device materials to recognised standards without the costs associated with setting this up in-house. Consequently, the manufacture and commercialisation of antibiofilm materials will be expedited by these services.
Collaborator Contribution Biofilm contamination is a leading cause of failure of medical implant devices that costs lives, reduces quality of life and costs millions of pounds globally. Therefore, development of medical implant device materials that can inhibit the formation of biofilms is critical to the efficacy of such devices. There are few facilities that can offer access to robust standardised biofilm testing within the region. Development of this service within MTIF will provide wide ranging impact as manufacturers, developers and academic researchers of implantable medical device materials and other anti-biofilm materials will be able to gain access to these facilities and expertise to test their products to the recognised ASTM standards (e.g. E2562/E3161) at low cost. There is a recognised lack of standardisation of biofilm testing, linking MTIF to NBIC via fellowships such as this ensures that MTIF is situated at the forefront of the biofilm field ensuring that the testing services developed are appropriate, relevant and useful to the wider community of industrial companies and academic researchers that have interests in biofilm testing. This allows MTIF to provide a biofilm testing service that they currently do not have and will allow them to expand their portfolio. Biofilm testing in a CDC Biofilm Reactor to the ASTM standard is a recognised standard for materials testing and will allow MTIF to provide a robust and reliable service. This fellowship provides MTIF with the expertise of an experienced biofilm researcher able to develop biofilm models to ASTM standards. I have over five years of experience in biofilm research, developing models to study biofilm formation of human pathogens and host-pathogen interactions. I am currently working on a Proof of Concept NBIC grant, developing SOPs to produce novel Vascular Access Grafts and subsequent evaluation of grafts coated with antimicrobials to evaluate their antibiofilm efficacy compared to currently commercially available grafts and their potential for future commercialisation. This fellowship will benefit me as a researcher by providing experience of setting up a commercial biofilm inhibition testing laboratory to the ASTM standard, knowledge that can only be acquired in an industrial setting like MTIF, a dual site research and development facility available to industry and academic institutions to support and accelerate the development of innovative medical technologies. This will provide me with the skills and experience of working with industrial partners and working to industrial standards, which will allow me to develop industrial collaborations for future funding applications.
Impact The achievements of this fellowship were as follow: • The development of a robust SOP for biofilm testing in a CDC Reactor to the internationally recognised ASTM standards to test new materials used in the manufacture of medical devices. • The development of an SOP for Salmonella testing from feed material. • The development of an SOP to test Salmonella on industry surfaces (swabs). These three SOPs have helped to extended MTIF's portfolio. This fellowship has supported my personal development by providing experience of grant capture. It also helped to develop my commercial awareness, through my involvement in setting up a commercial laboratory, developing SOPs to industrial standards, and provided me with the skills and experience of working with industrial partners which will allow me to develop industrial collaborations for future funding applications. A standardised biofilm testing was developed to the well-known ASTM standards, a biofilm testing service that MTIF did not have, and now they can provide it to manufacturers, developers and academic researchers of implantable medical device materials and other anti-biofilm materials within the region and at low cost. Additionally, food industries can also benefit with the new SOPs developed during this placement for Salmonella testing in feed material and swabs. For the next steps, MTIF and NTU are fully supportive and seeking opportunities to support applications for Early Career Fellowships, to continue with the development of methodologies to continue transferring my skills to business. In the meantime, it would be beneficial to have an economical support to develop more biofilm testing methodologies to offer more services to the wider community of industrial companies and academic researchers that have interests in biofilm testing in order to have a continuity in my career whilst the application process for fellowships proceeds.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_079 Development of biofilm inhibition testing to the ASTM standard for implanted medical devices (Vanina Garcia Altamirano) 
Organisation Nottingham Trent University
Country United Kingdom 
Sector Academic/University 
PI Contribution The primary ambition of this project is to develop biofilm testing capabilities in the Medical Technologies Innovation Facility (MTIF) to develop their portfolio to include standardised biofilm testing services for academics and industrial clients that wish to test developing medical device materials for biofilm inhibition properties to the American Society for Testing and Materials (ASTM) standard for implanted medical devices. Secondary aims are to develop standard operating procedures (SOPs) for several simple biofilm assays that can be utilised by MTIF as further services. This will support my personal development by providing experience of grant capture as well as working in the industrial sector. This fellowship will develop my commercial awareness, through my involvement in setting up a commercial laboratory and SOPs to the ASTM standard. This is experience that is difficult to gain through academic research alone and will mean that I am able to work effectively within these environments and in collaborations with industrial partners in the future, which is a vital part of bridging the gap between fundamental research and real-world application. This project aligns to the challenges "Leading-edge healthcare" and the "Healthy Ageing" outlined in the Industry Strategy Challenge Fund. Aging populations increasingly require implantable medical devices for improved quality of life and in treatment of disease. As biofilm infection is a leading cause of failure of these devices, the development of anti-biofilm medical materials is critical for the improvement of quality life for millions, having standardised biofilm testing services available in the region to test developing medical device materials provides researchers and commercial developers access to reliable and robust testing of new medical device materials to recognised standards without the costs associated with setting this up in-house. Consequently, the manufacture and commercialisation of antibiofilm materials will be expedited by these services.
Collaborator Contribution Biofilm contamination is a leading cause of failure of medical implant devices that costs lives, reduces quality of life and costs millions of pounds globally. Therefore, development of medical implant device materials that can inhibit the formation of biofilms is critical to the efficacy of such devices. There are few facilities that can offer access to robust standardised biofilm testing within the region. Development of this service within MTIF will provide wide ranging impact as manufacturers, developers and academic researchers of implantable medical device materials and other anti-biofilm materials will be able to gain access to these facilities and expertise to test their products to the recognised ASTM standards (e.g. E2562/E3161) at low cost. There is a recognised lack of standardisation of biofilm testing, linking MTIF to NBIC via fellowships such as this ensures that MTIF is situated at the forefront of the biofilm field ensuring that the testing services developed are appropriate, relevant and useful to the wider community of industrial companies and academic researchers that have interests in biofilm testing. This allows MTIF to provide a biofilm testing service that they currently do not have and will allow them to expand their portfolio. Biofilm testing in a CDC Biofilm Reactor to the ASTM standard is a recognised standard for materials testing and will allow MTIF to provide a robust and reliable service. This fellowship provides MTIF with the expertise of an experienced biofilm researcher able to develop biofilm models to ASTM standards. I have over five years of experience in biofilm research, developing models to study biofilm formation of human pathogens and host-pathogen interactions. I am currently working on a Proof of Concept NBIC grant, developing SOPs to produce novel Vascular Access Grafts and subsequent evaluation of grafts coated with antimicrobials to evaluate their antibiofilm efficacy compared to currently commercially available grafts and their potential for future commercialisation. This fellowship will benefit me as a researcher by providing experience of setting up a commercial biofilm inhibition testing laboratory to the ASTM standard, knowledge that can only be acquired in an industrial setting like MTIF, a dual site research and development facility available to industry and academic institutions to support and accelerate the development of innovative medical technologies. This will provide me with the skills and experience of working with industrial partners and working to industrial standards, which will allow me to develop industrial collaborations for future funding applications.
Impact The achievements of this fellowship were as follow: • The development of a robust SOP for biofilm testing in a CDC Reactor to the internationally recognised ASTM standards to test new materials used in the manufacture of medical devices. • The development of an SOP for Salmonella testing from feed material. • The development of an SOP to test Salmonella on industry surfaces (swabs). These three SOPs have helped to extended MTIF's portfolio. This fellowship has supported my personal development by providing experience of grant capture. It also helped to develop my commercial awareness, through my involvement in setting up a commercial laboratory, developing SOPs to industrial standards, and provided me with the skills and experience of working with industrial partners which will allow me to develop industrial collaborations for future funding applications. A standardised biofilm testing was developed to the well-known ASTM standards, a biofilm testing service that MTIF did not have, and now they can provide it to manufacturers, developers and academic researchers of implantable medical device materials and other anti-biofilm materials within the region and at low cost. Additionally, food industries can also benefit with the new SOPs developed during this placement for Salmonella testing in feed material and swabs. For the next steps, MTIF and NTU are fully supportive and seeking opportunities to support applications for Early Career Fellowships, to continue with the development of methodologies to continue transferring my skills to business. In the meantime, it would be beneficial to have an economical support to develop more biofilm testing methodologies to offer more services to the wider community of industrial companies and academic researchers that have interests in biofilm testing in order to have a continuity in my career whilst the application process for fellowships proceeds.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_083 Rapid, multi-dimension, long term lightsheet imaging of fungal biofilms under conditions of minimal phototoxicity (Campbell Gourlay) 
Organisation Intelligent Imaging Innovations Ltd
Country United Kingdom 
Sector Private 
PI Contribution We seek funds to support a 3 month fellowship to support Dr. Daniel Pentland, who recently completed his PhD, to collaborate with the instrument manufacturing company Intelligent Imaging Innovations (3i). The company produces a unique and highly versatile light-sheet microscope platform, the Marianas lightsheet that Dr. Pentland will use to generate the first 4D, long term fungal biofilms data gathered under conditions of minimal phototoxicity. The fellowship will greatly extend findings obtained from an NBIC funded FTMA award to Dr. Daniel Pentland (02POC19105) who worked with Carin Scientific to successfully establish light-sheet fluorescence microscopy to image fungal biofilms. The development of such imaging technology will allow us to perfect, for the first time, accurate methods for biomarker identification in complex biofilms, an essential step to enable early diagnosis of the many diseases caused by fungal biofilms and provide new insights to enable eradication. The project therefore falls within the Industry Strategy Challenge Fund areas of "Accelerated detection of disease" and "From data to early diagnosis and precision medicine". The fellowship will enable exchange Dr Pentland's of biological skills, technical expertise, background knowledge and experience in using light sheet to image biofilms obtained within the FTMA award at Cairn Scientific with 3i scientists. Dr. Pentland will work with the 3i team, in consultation with Dr Laissue (Essex) to perfect image analysis of fungal biofilm dynamics using this remarkable technique. As Dr. Pentland will be trained on the Marianas Lightsheet system and software at 3i he will develop a deep understanding of industrial application, product design and market demands. He will receive support and technical advice throughout from applications scientist and Marianas™ Lightsheet product manager, Dr Hella Baumann. Dr. Baumann's time and access to 3i's facility are equivalent to an in-kind support in excess of £5,000 in value.
Collaborator Contribution The main output arises from the design, experimental testing and validation of light sheet microscopy methods in a new area of application: The developmental imaging of fungal biofilms are of medical, environmental and industrial relevance but is a research area that is currently unexplored. This fellowship will enable a step change in the imaging of fungal biofilms by coupling the fellows academic expertise with cutting edge advanced low-light fluorescence microscopy knowledge at 3i. An key output is therefore the transfer of knowledge between industry and academia to develop a new area of research, business opportunity and return to UK Plc. A key industrial output of this research will be to test and develop protocols for the Marianas Light Sheet system so that these can be distributed and used by multiple users, within a range of disciplines, to image fungal biofilms without inflicting photodamage. The fellow will work with 3i to develop protocols that can be rapidly adapted to different fungal biofilm applications, thus extending the applicability of this technology to research groups within medical, environmental and industrial fields. The research will allow development of integrated hardware and software control, creating a seamless user experience with comprehensive control of acquisition and rendering, ideal for a multi-user setting. The expected outputs are reliant on the exchange of skills and knowledge between the fellow and 3i scientists and will lead to tangible benefits to both parties.
Impact Di-SPIM light sheet microscopy is ideal for monitoring the development of a dense fungal biofilm. Our approaches will lead to this technology being applied to a new field and opens a new customer base 3i as was planned within this application.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_083 Rapid, multi-dimension, long term lightsheet imaging of fungal biofilms under conditions of minimal phototoxicity (Campbell Gourlay) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution We seek funds to support a 3 month fellowship to support Dr. Daniel Pentland, who recently completed his PhD, to collaborate with the instrument manufacturing company Intelligent Imaging Innovations (3i). The company produces a unique and highly versatile light-sheet microscope platform, the Marianas lightsheet that Dr. Pentland will use to generate the first 4D, long term fungal biofilms data gathered under conditions of minimal phototoxicity. The fellowship will greatly extend findings obtained from an NBIC funded FTMA award to Dr. Daniel Pentland (02POC19105) who worked with Carin Scientific to successfully establish light-sheet fluorescence microscopy to image fungal biofilms. The development of such imaging technology will allow us to perfect, for the first time, accurate methods for biomarker identification in complex biofilms, an essential step to enable early diagnosis of the many diseases caused by fungal biofilms and provide new insights to enable eradication. The project therefore falls within the Industry Strategy Challenge Fund areas of "Accelerated detection of disease" and "From data to early diagnosis and precision medicine". The fellowship will enable exchange Dr Pentland's of biological skills, technical expertise, background knowledge and experience in using light sheet to image biofilms obtained within the FTMA award at Cairn Scientific with 3i scientists. Dr. Pentland will work with the 3i team, in consultation with Dr Laissue (Essex) to perfect image analysis of fungal biofilm dynamics using this remarkable technique. As Dr. Pentland will be trained on the Marianas Lightsheet system and software at 3i he will develop a deep understanding of industrial application, product design and market demands. He will receive support and technical advice throughout from applications scientist and Marianas™ Lightsheet product manager, Dr Hella Baumann. Dr. Baumann's time and access to 3i's facility are equivalent to an in-kind support in excess of £5,000 in value.
Collaborator Contribution The main output arises from the design, experimental testing and validation of light sheet microscopy methods in a new area of application: The developmental imaging of fungal biofilms are of medical, environmental and industrial relevance but is a research area that is currently unexplored. This fellowship will enable a step change in the imaging of fungal biofilms by coupling the fellows academic expertise with cutting edge advanced low-light fluorescence microscopy knowledge at 3i. An key output is therefore the transfer of knowledge between industry and academia to develop a new area of research, business opportunity and return to UK Plc. A key industrial output of this research will be to test and develop protocols for the Marianas Light Sheet system so that these can be distributed and used by multiple users, within a range of disciplines, to image fungal biofilms without inflicting photodamage. The fellow will work with 3i to develop protocols that can be rapidly adapted to different fungal biofilm applications, thus extending the applicability of this technology to research groups within medical, environmental and industrial fields. The research will allow development of integrated hardware and software control, creating a seamless user experience with comprehensive control of acquisition and rendering, ideal for a multi-user setting. The expected outputs are reliant on the exchange of skills and knowledge between the fellow and 3i scientists and will lead to tangible benefits to both parties.
Impact Di-SPIM light sheet microscopy is ideal for monitoring the development of a dense fungal biofilm. Our approaches will lead to this technology being applied to a new field and opens a new customer base 3i as was planned within this application.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_083 Rapid, multi-dimension, long term lightsheet imaging of fungal biofilms under conditions of minimal phototoxicity (Campbell Gourlay) 
Organisation University of Essex
Country United Kingdom 
Sector Academic/University 
PI Contribution We seek funds to support a 3 month fellowship to support Dr. Daniel Pentland, who recently completed his PhD, to collaborate with the instrument manufacturing company Intelligent Imaging Innovations (3i). The company produces a unique and highly versatile light-sheet microscope platform, the Marianas lightsheet that Dr. Pentland will use to generate the first 4D, long term fungal biofilms data gathered under conditions of minimal phototoxicity. The fellowship will greatly extend findings obtained from an NBIC funded FTMA award to Dr. Daniel Pentland (02POC19105) who worked with Carin Scientific to successfully establish light-sheet fluorescence microscopy to image fungal biofilms. The development of such imaging technology will allow us to perfect, for the first time, accurate methods for biomarker identification in complex biofilms, an essential step to enable early diagnosis of the many diseases caused by fungal biofilms and provide new insights to enable eradication. The project therefore falls within the Industry Strategy Challenge Fund areas of "Accelerated detection of disease" and "From data to early diagnosis and precision medicine". The fellowship will enable exchange Dr Pentland's of biological skills, technical expertise, background knowledge and experience in using light sheet to image biofilms obtained within the FTMA award at Cairn Scientific with 3i scientists. Dr. Pentland will work with the 3i team, in consultation with Dr Laissue (Essex) to perfect image analysis of fungal biofilm dynamics using this remarkable technique. As Dr. Pentland will be trained on the Marianas Lightsheet system and software at 3i he will develop a deep understanding of industrial application, product design and market demands. He will receive support and technical advice throughout from applications scientist and Marianas™ Lightsheet product manager, Dr Hella Baumann. Dr. Baumann's time and access to 3i's facility are equivalent to an in-kind support in excess of £5,000 in value.
Collaborator Contribution The main output arises from the design, experimental testing and validation of light sheet microscopy methods in a new area of application: The developmental imaging of fungal biofilms are of medical, environmental and industrial relevance but is a research area that is currently unexplored. This fellowship will enable a step change in the imaging of fungal biofilms by coupling the fellows academic expertise with cutting edge advanced low-light fluorescence microscopy knowledge at 3i. An key output is therefore the transfer of knowledge between industry and academia to develop a new area of research, business opportunity and return to UK Plc. A key industrial output of this research will be to test and develop protocols for the Marianas Light Sheet system so that these can be distributed and used by multiple users, within a range of disciplines, to image fungal biofilms without inflicting photodamage. The fellow will work with 3i to develop protocols that can be rapidly adapted to different fungal biofilm applications, thus extending the applicability of this technology to research groups within medical, environmental and industrial fields. The research will allow development of integrated hardware and software control, creating a seamless user experience with comprehensive control of acquisition and rendering, ideal for a multi-user setting. The expected outputs are reliant on the exchange of skills and knowledge between the fellow and 3i scientists and will lead to tangible benefits to both parties.
Impact Di-SPIM light sheet microscopy is ideal for monitoring the development of a dense fungal biofilm. Our approaches will lead to this technology being applied to a new field and opens a new customer base 3i as was planned within this application.
Start Year 2021
 
Description NBIC FTMA Fellowship 20_IF_083 Rapid, multi-dimension, long term lightsheet imaging of fungal biofilms under conditions of minimal phototoxicity (Campbell Gourlay) 
Organisation University of Kent
Country United Kingdom 
Sector Academic/University 
PI Contribution We seek funds to support a 3 month fellowship to support Dr. Daniel Pentland, who recently completed his PhD, to collaborate with the instrument manufacturing company Intelligent Imaging Innovations (3i). The company produces a unique and highly versatile light-sheet microscope platform, the Marianas lightsheet that Dr. Pentland will use to generate the first 4D, long term fungal biofilms data gathered under conditions of minimal phototoxicity. The fellowship will greatly extend findings obtained from an NBIC funded FTMA award to Dr. Daniel Pentland (02POC19105) who worked with Carin Scientific to successfully establish light-sheet fluorescence microscopy to image fungal biofilms. The development of such imaging technology will allow us to perfect, for the first time, accurate methods for biomarker identification in complex biofilms, an essential step to enable early diagnosis of the many diseases caused by fungal biofilms and provide new insights to enable eradication. The project therefore falls within the Industry Strategy Challenge Fund areas of "Accelerated detection of disease" and "From data to early diagnosis and precision medicine". The fellowship will enable exchange Dr Pentland's of biological skills, technical expertise, background knowledge and experience in using light sheet to image biofilms obtained within the FTMA award at Cairn Scientific with 3i scientists. Dr. Pentland will work with the 3i team, in consultation with Dr Laissue (Essex) to perfect image analysis of fungal biofilm dynamics using this remarkable technique. As Dr. Pentland will be trained on the Marianas Lightsheet system and software at 3i he will develop a deep understanding of industrial application, product design and market demands. He will receive support and technical advice throughout from applications scientist and Marianas™ Lightsheet product manager, Dr Hella Baumann. Dr. Baumann's time and access to 3i's facility are equivalent to an in-kind support in excess of £5,000 in value.
Collaborator Contribution The main output arises from the design, experimental testing and validation of light sheet microscopy methods in a new area of application: The developmental imaging of fungal biofilms are of medical, environmental and industrial relevance but is a research area that is currently unexplored. This fellowship will enable a step change in the imaging of fungal biofilms by coupling the fellows academic expertise with cutting edge advanced low-light fluorescence microscopy knowledge at 3i. An key output is therefore the transfer of knowledge between industry and academia to develop a new area of research, business opportunity and return to UK Plc. A key industrial output of this research will be to test and develop protocols for the Marianas Light Sheet system so that these can be distributed and used by multiple users, within a range of disciplines, to image fungal biofilms without inflicting photodamage. The fellow will work with 3i to develop protocols that can be rapidly adapted to different fungal biofilm applications, thus extending the applicability of this technology to research groups within medical, environmental and industrial fields. The research will allow development of integrated hardware and software control, creating a seamless user experience with comprehensive control of acquisition and rendering, ideal for a multi-user setting. The expected outputs are reliant on the exchange of skills and knowledge between the fellow and 3i scientists and will lead to tangible benefits to both parties.
Impact Di-SPIM light sheet microscopy is ideal for monitoring the development of a dense fungal biofilm. Our approaches will lead to this technology being applied to a new field and opens a new customer base 3i as was planned within this application.
Start Year 2021
 
Description NBIC FTMA Fellowship 21_IF_086 Developing cutting-edge "Biofilms adventures" for children and families. (JC Denis) 
Organisation Atorika
Country France 
Sector Public 
PI Contribution Atorika is a French science engagement start-up, established 1.5 years ago. Currently, the start-up growth relies on the development and sales of science boxes for children, which are either sent regularly to their subscribers, or used in schools alongside an Atorika's employee. Longer term, the start-up will possess physical science centres which will host their activities. As an experienced creator of science activities for school-aged children, I will partner with Atorika to develop a series of science kits about biofilms. This is mutually beneficial for all parties: while Atorika will have access to my expertise, I will benefit from the experience of the team at Atorika, which includes another science outreach professional alongside graphic designers and virtual reality professionals - domains I currently have very little experience of, but which are central to the "Audience of the future" challenge highlighted in the Industry Strategy Challenge Fund. Longer terms, the activities and virtual reality assets developed could also be part of the science centres they will build. I will also gain a good understanding of the French outreach landscape and related challenges, and improve my professional practice, exploring new routes and techniques for my own work. The activities which I will develop with Atorika will engage around research conducted at NBIC, which covers the following challenges identified by the Industry Strategy Challenge Fund: Transforming food production and leading-edge healthcare. We have identified that these challenges, addressed by some of NBIC research, are particularly relevant to engage the public with. NBIC will benefit from using virtual reality and other modern digital engagement techniques, a capacity that NBIC does not currently have access to. Working with the Atorika team will enable to develop better activities, and will enable to deploy NBIC reach more internationally, with new activities blending "traditional" and technological approaches thanks to Atorika's expertise.
Collaborator Contribution We will develop a series of 10 activity boxes ("one adventure", in Atorika's terminology) which will be ready to be produced at scale at the end of the mobility. These science activities will include virtual reality or other contemporary digital tools to increase the user's experience. I have very little experience of these technologies and will learn how to include them successfully alongside more traditional science activities. The activities will be produced in both French and English, enabling a wider international exposure of them and the work undertaken by NBIC. I do not have experience of producing science activities for a commercial purpose; this will be an excellent opportunity for me to learn about commercialising my skills, in addition to discovering how a small start-up company operates. Most of the work will be conducted remotely, from the UK, but we will test the developed resources in schools both in the UK and in France. In the future, as the start-up develops, following its business plans, which includes the opening of science centres across the whole French territory, collaboration would be very desirable. We could also imagine replicating a possible similar model in the UK. The activities developed will be used by NBIC once the mobility is over, through the NBIC outreach and public engagement programme (which I coordinate), leaving a long-lasting product, featuring innovative engagement technologies, with the potential to reach thousands of school aged children and their families, raise science aspirations and engage them with NBIC research and some of the Industry Strategy Challenges. University of Edinburgh: Development of company and products, and activities for NBIC. Atorika: Providing tools for creating outreach activities to do at home.
Impact I developed two new activities boxes, and reviewed and adapted 5 of their existing activities. I provided input on the overall company strategy, including the overall content of the boxes, the communication strategy, the design, their app, etc. The outcomes are quite different from what was originally planned as most collaborators left the company before or shortly after I started, and I also suffered from health issues the last two months of the grant. This means I did not achieve as much as I was hoping. However, I have now a much better sense of how to run a start-up company, how to make is successful, and how I could monetise my skills and expertise through commercialising my regular academic work. Next steps: I would like to keep developing further biofilms activities for the company, and also investigate how to setup a similar company in the UK through the University, or agree on a deal to be the UK branch of the French company. I would need help to understand what is required to do this.
Start Year 2021
 
Description NBIC FTMA Fellowship 21_IF_086 Developing cutting-edge "Biofilms adventures" for children and families. (JC Denis) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Atorika is a French science engagement start-up, established 1.5 years ago. Currently, the start-up growth relies on the development and sales of science boxes for children, which are either sent regularly to their subscribers, or used in schools alongside an Atorika's employee. Longer term, the start-up will possess physical science centres which will host their activities. As an experienced creator of science activities for school-aged children, I will partner with Atorika to develop a series of science kits about biofilms. This is mutually beneficial for all parties: while Atorika will have access to my expertise, I will benefit from the experience of the team at Atorika, which includes another science outreach professional alongside graphic designers and virtual reality professionals - domains I currently have very little experience of, but which are central to the "Audience of the future" challenge highlighted in the Industry Strategy Challenge Fund. Longer terms, the activities and virtual reality assets developed could also be part of the science centres they will build. I will also gain a good understanding of the French outreach landscape and related challenges, and improve my professional practice, exploring new routes and techniques for my own work. The activities which I will develop with Atorika will engage around research conducted at NBIC, which covers the following challenges identified by the Industry Strategy Challenge Fund: Transforming food production and leading-edge healthcare. We have identified that these challenges, addressed by some of NBIC research, are particularly relevant to engage the public with. NBIC will benefit from using virtual reality and other modern digital engagement techniques, a capacity that NBIC does not currently have access to. Working with the Atorika team will enable to develop better activities, and will enable to deploy NBIC reach more internationally, with new activities blending "traditional" and technological approaches thanks to Atorika's expertise.
Collaborator Contribution We will develop a series of 10 activity boxes ("one adventure", in Atorika's terminology) which will be ready to be produced at scale at the end of the mobility. These science activities will include virtual reality or other contemporary digital tools to increase the user's experience. I have very little experience of these technologies and will learn how to include them successfully alongside more traditional science activities. The activities will be produced in both French and English, enabling a wider international exposure of them and the work undertaken by NBIC. I do not have experience of producing science activities for a commercial purpose; this will be an excellent opportunity for me to learn about commercialising my skills, in addition to discovering how a small start-up company operates. Most of the work will be conducted remotely, from the UK, but we will test the developed resources in schools both in the UK and in France. In the future, as the start-up develops, following its business plans, which includes the opening of science centres across the whole French territory, collaboration would be very desirable. We could also imagine replicating a possible similar model in the UK. The activities developed will be used by NBIC once the mobility is over, through the NBIC outreach and public engagement programme (which I coordinate), leaving a long-lasting product, featuring innovative engagement technologies, with the potential to reach thousands of school aged children and their families, raise science aspirations and engage them with NBIC research and some of the Industry Strategy Challenges. University of Edinburgh: Development of company and products, and activities for NBIC. Atorika: Providing tools for creating outreach activities to do at home.
Impact I developed two new activities boxes, and reviewed and adapted 5 of their existing activities. I provided input on the overall company strategy, including the overall content of the boxes, the communication strategy, the design, their app, etc. The outcomes are quite different from what was originally planned as most collaborators left the company before or shortly after I started, and I also suffered from health issues the last two months of the grant. This means I did not achieve as much as I was hoping. However, I have now a much better sense of how to run a start-up company, how to make is successful, and how I could monetise my skills and expertise through commercialising my regular academic work. Next steps: I would like to keep developing further biofilms activities for the company, and also investigate how to setup a similar company in the UK through the University, or agree on a deal to be the UK branch of the French company. I would need help to understand what is required to do this.
Start Year 2021
 
Description NBIC FTMA Fellowship 21_IF_086 Developing cutting-edge "Biofilms adventures" for children and families. (JC Denis) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution Atorika is a French science engagement start-up, established 1.5 years ago. Currently, the start-up growth relies on the development and sales of science boxes for children, which are either sent regularly to their subscribers, or used in schools alongside an Atorika's employee. Longer term, the start-up will possess physical science centres which will host their activities. As an experienced creator of science activities for school-aged children, I will partner with Atorika to develop a series of science kits about biofilms. This is mutually beneficial for all parties: while Atorika will have access to my expertise, I will benefit from the experience of the team at Atorika, which includes another science outreach professional alongside graphic designers and virtual reality professionals - domains I currently have very little experience of, but which are central to the "Audience of the future" challenge highlighted in the Industry Strategy Challenge Fund. Longer terms, the activities and virtual reality assets developed could also be part of the science centres they will build. I will also gain a good understanding of the French outreach landscape and related challenges, and improve my professional practice, exploring new routes and techniques for my own work. The activities which I will develop with Atorika will engage around research conducted at NBIC, which covers the following challenges identified by the Industry Strategy Challenge Fund: Transforming food production and leading-edge healthcare. We have identified that these challenges, addressed by some of NBIC research, are particularly relevant to engage the public with. NBIC will benefit from using virtual reality and other modern digital engagement techniques, a capacity that NBIC does not currently have access to. Working with the Atorika team will enable to develop better activities, and will enable to deploy NBIC reach more internationally, with new activities blending "traditional" and technological approaches thanks to Atorika's expertise.
Collaborator Contribution We will develop a series of 10 activity boxes ("one adventure", in Atorika's terminology) which will be ready to be produced at scale at the end of the mobility. These science activities will include virtual reality or other contemporary digital tools to increase the user's experience. I have very little experience of these technologies and will learn how to include them successfully alongside more traditional science activities. The activities will be produced in both French and English, enabling a wider international exposure of them and the work undertaken by NBIC. I do not have experience of producing science activities for a commercial purpose; this will be an excellent opportunity for me to learn about commercialising my skills, in addition to discovering how a small start-up company operates. Most of the work will be conducted remotely, from the UK, but we will test the developed resources in schools both in the UK and in France. In the future, as the start-up develops, following its business plans, which includes the opening of science centres across the whole French territory, collaboration would be very desirable. We could also imagine replicating a possible similar model in the UK. The activities developed will be used by NBIC once the mobility is over, through the NBIC outreach and public engagement programme (which I coordinate), leaving a long-lasting product, featuring innovative engagement technologies, with the potential to reach thousands of school aged children and their families, raise science aspirations and engage them with NBIC research and some of the Industry Strategy Challenges. University of Edinburgh: Development of company and products, and activities for NBIC. Atorika: Providing tools for creating outreach activities to do at home.
Impact I developed two new activities boxes, and reviewed and adapted 5 of their existing activities. I provided input on the overall company strategy, including the overall content of the boxes, the communication strategy, the design, their app, etc. The outcomes are quite different from what was originally planned as most collaborators left the company before or shortly after I started, and I also suffered from health issues the last two months of the grant. This means I did not achieve as much as I was hoping. However, I have now a much better sense of how to run a start-up company, how to make is successful, and how I could monetise my skills and expertise through commercialising my regular academic work. Next steps: I would like to keep developing further biofilms activities for the company, and also investigate how to setup a similar company in the UK through the University, or agree on a deal to be the UK branch of the French company. I would need help to understand what is required to do this.
Start Year 2021
 
Description NBIC FTMA Fellowship 21_IF_087 In situ AFM of Bio-inspired Antimicrobial Surfaces. (Peng Bao) 
Organisation Bruker Corporation
Department Bruker (United Kingdom)
Country United Kingdom 
Sector Private 
PI Contribution The search for new, functional antimicrobial surfaces is becoming more urgent as prevention of biofilms becomes an underpinning strategy for preventing biofilms that are implicated in AMR and significant economic costs across multiple industry sectors. Bioinspired materials and surfaces are emerging as an important class of antimicrobial surfaces. In this research, we will utilize the self-assembly of proteins to form a novel kind of well-controlled, nanostructured, and bio-compatible surface with antimicrobial functions. This smart surface will help us fight against the increasing threats from antibiotic resistance of bacteria, aligning well with the NBIC themes to prevent biofilms. This research fits well to the priorities outlined within the Industrial Strategy Challenge Fund (ISCF) - developing a leading-edge healthcare solution. However, knowledge based discovery of successful systems requires two-fold ambitions: (i) imaging and probing the nature and performance of this surfaces in in situ environments, i.e. the liquid phase, and (ii) mapping the actual interaction of bacterial cells with these surfaces. This placement will enable the applicant to work with the leading instrument company in this field to optimise operating instrumental conditions to enable us to operate our AFM instruments at the highest levels. With the support from this fellowship, I will collaborate closely with Bruker. With their experience and expertise in AFM, I will be able to speed up the progress of my research and train other researchers in the group. I will also learn how to collaborate effectively/ productively with industry partners. This will help me establish a new or long-term collaborative relationship with industry partners. By leading this collaborative project, I will also gain/enhance my communication, leadership, and project management skills. All of these will benefit greatly my career development. This could be an essential step for me to enter the next stage as an independent researcher.
Collaborator Contribution With the support of the fellowship, I will further enhance my skills in the use of Bruker AFM, especially in the area of high-resolution in situ imaging of biological systems in the liquid. I will also get good training on the single-molecule force spectrum measurement with Bio-AFM. This exchange will not only improve my experimental skills in AFM but also will benefit other AFM users in our Surface Science Research Centre by bringing back new experimental skills/knowledge from our industry partner - Bruker. My expertise in many fields such as biophysics, microfluidics, biosensors, and antimicrobial surfaces will also benefit my collaborator in Bruker, by inspiring them to find wider applications of AFM in new research areas and open up market opportunities. In this secondment, I will collaborate with the researchers in Bruker to enable high level instrument operation to enable my project on "Probing microbial interaction at nanofabricated smart surfaces". Clear objectives are identified. In objective (1), we will study the self assembly/ dissociation of S-layer proteins at a liquid-solid interface using AFM. As S-layer proteins could be the target of many antibiotics or antimicrobial peptides, this research will help improve the efficiency of these drugs. The important part of objective (1) is to optimise experimental parameters of our AFM instrument to realize the high-resolution imaging in-situ. In objective (2), we will use bio-AFM technique to study the interaction between the S-layer and the surface of a bacterial cell and will benefit us in the design of novel, bio-inspired, and smart antifouling and antimicrobial surfaces. This research will provide critical proof-of-concept data for a new grant application on anti-biofouling, which has a wide societal and economic impact.
Impact Achievements: 1) We have improved the quality of high-resolution images of 2D crystal of membrane protein (Bacteriorhodopsin), especially in the high-eigenmode tapping, a mode we used for imaging membrane proteins in liquid for the first time. These results have been drafted as a paper and will be submitted soon to the appropriate journal, such as J of Biophysics or APL. This ability is also very important for the following studies in our main project employing S-layer protein 2D crystals. The new high-eigenmode tapping mode we demonstrated here will benefit researchers in the AFM community who are working on high-resolution imaging of biological samples in an aqueous environment. 2) We have upgraded our multimode AFM by introducing a new noise isolation box, which will facilitate the following research of our projects, as well as other projects in our lab that need AFM. 3) We have developed a robust cleaning protocol for AFM tips used for imaging in liquid. Future work: In the next step, we will start the self-assembly of S-layer proteins onto various substrates and image them using AFM, TEM, and STM. We will also try to modify the surface properties of S-layer protein arrays and use them as an antimicrobial surface to prevent the formation of biofilms. We will continue to collaborate with Bruker on our project. Further finance support is welcomed. With the success of the project, we might need further support in the commercialization of our technology.
Start Year 2021
 
Description NBIC FTMA Fellowship 21_IF_087 In situ AFM of Bio-inspired Antimicrobial Surfaces. (Peng Bao) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The search for new, functional antimicrobial surfaces is becoming more urgent as prevention of biofilms becomes an underpinning strategy for preventing biofilms that are implicated in AMR and significant economic costs across multiple industry sectors. Bioinspired materials and surfaces are emerging as an important class of antimicrobial surfaces. In this research, we will utilize the self-assembly of proteins to form a novel kind of well-controlled, nanostructured, and bio-compatible surface with antimicrobial functions. This smart surface will help us fight against the increasing threats from antibiotic resistance of bacteria, aligning well with the NBIC themes to prevent biofilms. This research fits well to the priorities outlined within the Industrial Strategy Challenge Fund (ISCF) - developing a leading-edge healthcare solution. However, knowledge based discovery of successful systems requires two-fold ambitions: (i) imaging and probing the nature and performance of this surfaces in in situ environments, i.e. the liquid phase, and (ii) mapping the actual interaction of bacterial cells with these surfaces. This placement will enable the applicant to work with the leading instrument company in this field to optimise operating instrumental conditions to enable us to operate our AFM instruments at the highest levels. With the support from this fellowship, I will collaborate closely with Bruker. With their experience and expertise in AFM, I will be able to speed up the progress of my research and train other researchers in the group. I will also learn how to collaborate effectively/ productively with industry partners. This will help me establish a new or long-term collaborative relationship with industry partners. By leading this collaborative project, I will also gain/enhance my communication, leadership, and project management skills. All of these will benefit greatly my career development. This could be an essential step for me to enter the next stage as an independent researcher.
Collaborator Contribution With the support of the fellowship, I will further enhance my skills in the use of Bruker AFM, especially in the area of high-resolution in situ imaging of biological systems in the liquid. I will also get good training on the single-molecule force spectrum measurement with Bio-AFM. This exchange will not only improve my experimental skills in AFM but also will benefit other AFM users in our Surface Science Research Centre by bringing back new experimental skills/knowledge from our industry partner - Bruker. My expertise in many fields such as biophysics, microfluidics, biosensors, and antimicrobial surfaces will also benefit my collaborator in Bruker, by inspiring them to find wider applications of AFM in new research areas and open up market opportunities. In this secondment, I will collaborate with the researchers in Bruker to enable high level instrument operation to enable my project on "Probing microbial interaction at nanofabricated smart surfaces". Clear objectives are identified. In objective (1), we will study the self assembly/ dissociation of S-layer proteins at a liquid-solid interface using AFM. As S-layer proteins could be the target of many antibiotics or antimicrobial peptides, this research will help improve the efficiency of these drugs. The important part of objective (1) is to optimise experimental parameters of our AFM instrument to realize the high-resolution imaging in-situ. In objective (2), we will use bio-AFM technique to study the interaction between the S-layer and the surface of a bacterial cell and will benefit us in the design of novel, bio-inspired, and smart antifouling and antimicrobial surfaces. This research will provide critical proof-of-concept data for a new grant application on anti-biofouling, which has a wide societal and economic impact.
Impact Achievements: 1) We have improved the quality of high-resolution images of 2D crystal of membrane protein (Bacteriorhodopsin), especially in the high-eigenmode tapping, a mode we used for imaging membrane proteins in liquid for the first time. These results have been drafted as a paper and will be submitted soon to the appropriate journal, such as J of Biophysics or APL. This ability is also very important for the following studies in our main project employing S-layer protein 2D crystals. The new high-eigenmode tapping mode we demonstrated here will benefit researchers in the AFM community who are working on high-resolution imaging of biological samples in an aqueous environment. 2) We have upgraded our multimode AFM by introducing a new noise isolation box, which will facilitate the following research of our projects, as well as other projects in our lab that need AFM. 3) We have developed a robust cleaning protocol for AFM tips used for imaging in liquid. Future work: In the next step, we will start the self-assembly of S-layer proteins onto various substrates and image them using AFM, TEM, and STM. We will also try to modify the surface properties of S-layer protein arrays and use them as an antimicrobial surface to prevent the formation of biofilms. We will continue to collaborate with Bruker on our project. Further finance support is welcomed. With the success of the project, we might need further support in the commercialization of our technology.
Start Year 2021
 
Description NBIC FTMA Fellowship 21_IF_087 In situ AFM of Bio-inspired Antimicrobial Surfaces. (Peng Bao) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution The search for new, functional antimicrobial surfaces is becoming more urgent as prevention of biofilms becomes an underpinning strategy for preventing biofilms that are implicated in AMR and significant economic costs across multiple industry sectors. Bioinspired materials and surfaces are emerging as an important class of antimicrobial surfaces. In this research, we will utilize the self-assembly of proteins to form a novel kind of well-controlled, nanostructured, and bio-compatible surface with antimicrobial functions. This smart surface will help us fight against the increasing threats from antibiotic resistance of bacteria, aligning well with the NBIC themes to prevent biofilms. This research fits well to the priorities outlined within the Industrial Strategy Challenge Fund (ISCF) - developing a leading-edge healthcare solution. However, knowledge based discovery of successful systems requires two-fold ambitions: (i) imaging and probing the nature and performance of this surfaces in in situ environments, i.e. the liquid phase, and (ii) mapping the actual interaction of bacterial cells with these surfaces. This placement will enable the applicant to work with the leading instrument company in this field to optimise operating instrumental conditions to enable us to operate our AFM instruments at the highest levels. With the support from this fellowship, I will collaborate closely with Bruker. With their experience and expertise in AFM, I will be able to speed up the progress of my research and train other researchers in the group. I will also learn how to collaborate effectively/ productively with industry partners. This will help me establish a new or long-term collaborative relationship with industry partners. By leading this collaborative project, I will also gain/enhance my communication, leadership, and project management skills. All of these will benefit greatly my career development. This could be an essential step for me to enter the next stage as an independent researcher.
Collaborator Contribution With the support of the fellowship, I will further enhance my skills in the use of Bruker AFM, especially in the area of high-resolution in situ imaging of biological systems in the liquid. I will also get good training on the single-molecule force spectrum measurement with Bio-AFM. This exchange will not only improve my experimental skills in AFM but also will benefit other AFM users in our Surface Science Research Centre by bringing back new experimental skills/knowledge from our industry partner - Bruker. My expertise in many fields such as biophysics, microfluidics, biosensors, and antimicrobial surfaces will also benefit my collaborator in Bruker, by inspiring them to find wider applications of AFM in new research areas and open up market opportunities. In this secondment, I will collaborate with the researchers in Bruker to enable high level instrument operation to enable my project on "Probing microbial interaction at nanofabricated smart surfaces". Clear objectives are identified. In objective (1), we will study the self assembly/ dissociation of S-layer proteins at a liquid-solid interface using AFM. As S-layer proteins could be the target of many antibiotics or antimicrobial peptides, this research will help improve the efficiency of these drugs. The important part of objective (1) is to optimise experimental parameters of our AFM instrument to realize the high-resolution imaging in-situ. In objective (2), we will use bio-AFM technique to study the interaction between the S-layer and the surface of a bacterial cell and will benefit us in the design of novel, bio-inspired, and smart antifouling and antimicrobial surfaces. This research will provide critical proof-of-concept data for a new grant application on anti-biofouling, which has a wide societal and economic impact.
Impact Achievements: 1) We have improved the quality of high-resolution images of 2D crystal of membrane protein (Bacteriorhodopsin), especially in the high-eigenmode tapping, a mode we used for imaging membrane proteins in liquid for the first time. These results have been drafted as a paper and will be submitted soon to the appropriate journal, such as J of Biophysics or APL. This ability is also very important for the following studies in our main project employing S-layer protein 2D crystals. The new high-eigenmode tapping mode we demonstrated here will benefit researchers in the AFM community who are working on high-resolution imaging of biological samples in an aqueous environment. 2) We have upgraded our multimode AFM by introducing a new noise isolation box, which will facilitate the following research of our projects, as well as other projects in our lab that need AFM. 3) We have developed a robust cleaning protocol for AFM tips used for imaging in liquid. Future work: In the next step, we will start the self-assembly of S-layer proteins onto various substrates and image them using AFM, TEM, and STM. We will also try to modify the surface properties of S-layer protein arrays and use them as an antimicrobial surface to prevent the formation of biofilms. We will continue to collaborate with Bruker on our project. Further finance support is welcomed. With the success of the project, we might need further support in the commercialization of our technology.
Start Year 2021
 
Description NBIC FTMA Fellowship F_19_01 Impact of the potential interfering of Azospirillum brasilense Az39, one of the most used strains in agriculture inoculants in Argentina in polymicrobial biofilms and their interaction with the plant.(Miguel Camara) 
Organisation NOVA SA
Country Argentina 
Sector Private 
PI Contribution Studies in crop production require using novel strategies with low environmental impact. Some bacterial biofilms when associated with plant roots promote crop production (Plant Growth Promoting Rhizobacteria or PGPR) protecting them against environmental stress and diseases. Key for these interactions are small bacterial signal molecules which control the production of traits beneficial to the plant by a process known as quorum sensing (QS). Some bacterial plant pathogens also produce QS signals to trigger disease processes. Azospirillum brasilense Az39 is a key PGPR which can fix nitrogen for the plant and produce hormones which affect plant growth. It can degrade QS molecules and hence has potential to inactivate plant pathogens but also has the machinery to detect QS molecules although we still do not know how this affects the interaction with the plant. This fellowship will provide the required training to Dr. Gaston Lopez working at Rio Cuarto University (Argentina) in collaboration with the company NOVA SA to unravel how QS signal sensing and degradation 'impacts on the relationship between NOVA'S inoculant with Az39 (named Promozion), polymicrobial biofilms and the plant. This is paramount to understand the mechanisms behind the positive impact it has on crop production providing the stepping-stone required to improve natural inoculants using this bacterium for a wider use in agriculture in Argentina and other countries. The project will provide Dr. Gaston Lopez the know-how for the characterisation of QS inhibitory bacteria and the impact this has on plant growth and protection against diseases which he would take back to NOVA SA and Rio Cuarto University for the optimisation of inoculants for field trials. This project aligns with the Industrial Strategy Challenge Fund on Transforming Food Production through exploitation of natural inoculants and 101C Engineer theme. The long-term aims will be to improve agricultural productivity reducing the use of chemical treatments and hence their impact in the environment.
Collaborator Contribution Benefits to the Researcher: Dr. Gaston Lopez will gain know-how on the characterisation of quorum quenching bacteria including analytical chemistry techniques, construction of transcriptional fusions, tagging of bacteria for polymicrobial biofilms analysis, use of biofilms models and confocal microscopy, and determination of the specificity of QS receptors. Benefits to NBIC 1. Research in food security is at the heart of NOVA SA and Rio Cuarto University through their research expertise on bacterial-plant interactions and the optimisation of inoculants. NBIC will benefit through the delivery of sustainable solutions to global food challenges increasing the international research portfolio of this Centre. 2. It will lead to long-term collaborations between NBIC and the Argentinian applicants through applications to emerging calls from UKRI to enhance links with Argentina and the GCRF in the strategic area of sustainable agriculture. 3. Dr. Gaston Lopez will be giving seminars to NBIC researchers during his visit to Nottingham and explore future collaborations between NOVA SA the University of Rio Cuarto and NBIC. Benefits to the UK It will strengthen links with Argentina through access to the unique infrastructure for research on maize, wheat and soybean production, being one of the largest producers in the world. Especially as the PGPR studied in this project is a major inoculant for both crops used by NOVA SA. This project will contribute to the UK cross-government programme on Global Food Security research and the outcomes are likely to be translated into UK crops to reduce the use chemical fertilizers and pesticides. Benefits to Argentina The benefits to NOVA SA in particular and more generally to Argentina will be directly related to aiding the improvement of biofertilizers and biostimulants formulated with Azospirillum brasilense Az39 for the biological treatment of maize, wheat and soybean seeds or seedlings. The understanding of how the "cell to cell" communication mechanisms mediated by "quorum" signals modify the behaviour of this bacterium under agronomic conditions will become a "key tool" to improve the formulation of current commercial products with improved bacterial inoculant combinations, making them more efficient to promote plant growth under field conditions. The benefits will be reflected in the consolidation of an experimental line for this Argentinian team (NOVA SA and Rio Cuarto University), which yea entail an increase in the timber of specific joint publications with Nottingham University and the establishment of inks with NBIC for longer term collaborations.
Impact Although covid-19 reduced the time of my stay at Nottingham, I was able to make progress in the generation of some of the recombinant clones required to advance the understanding of the quorum sensing(QS)-quorum quenching (QS) system present in the plant growth promoting rhizobacteria (PGPR) A. brasilense Az39 with a view to study the impact of this system in crops inoculants. This was my trip outside Argentina and my stay at the Nottingham NBIC labs enabled me to acquire expertise in new molecular biology and analytical chemistry techniques. It also gave me the exposure to a very distinct way of working with opportunities to interact with scientists working in many disciplines but specially on biofilm research. This has also strengthened my CV and enabled me to apply for a permanent position as a CONICET researcher at the Universidad Nacional de Río Cuarto (application still under evaluation). Furthermore, the experience acquired during my stay allowed me to take on a part-time job as junior researcher in NOVA SA, the partner company who supported my FTMA application and work on the production of biofertilizers and in particular the strain I used in this project. NOVA SA is very interested in the project that I carried out during my stay at Nottingham. To enable me to continue with this project I have been given a PhD student, Sofía Nievas, who received a PhD scholarship from CONICET at the Universidad Nacional de Río Cuarto. This will ensure the continuation of the collaboration with Nottingham. Overall, my stay at an NBIC institution through this FTMA award, has allowed to lay the foundations to consolidate a longer-term international collaboration between Argentina (CONICET and UNRC) and the UK. We will continue to study how the QQ capacity of A. brasilense Az39 plays a role in the rhizosphere of crops and how this capacity can be exploited to develop new biofertilizers.
Start Year 2019
 
Description NBIC FTMA Fellowship F_19_01 Impact of the potential interfering of Azospirillum brasilense Az39, one of the most used strains in agriculture inoculants in Argentina in polymicrobial biofilms and their interaction with the plant.(Miguel Camara) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Studies in crop production require using novel strategies with low environmental impact. Some bacterial biofilms when associated with plant roots promote crop production (Plant Growth Promoting Rhizobacteria or PGPR) protecting them against environmental stress and diseases. Key for these interactions are small bacterial signal molecules which control the production of traits beneficial to the plant by a process known as quorum sensing (QS). Some bacterial plant pathogens also produce QS signals to trigger disease processes. Azospirillum brasilense Az39 is a key PGPR which can fix nitrogen for the plant and produce hormones which affect plant growth. It can degrade QS molecules and hence has potential to inactivate plant pathogens but also has the machinery to detect QS molecules although we still do not know how this affects the interaction with the plant. This fellowship will provide the required training to Dr. Gaston Lopez working at Rio Cuarto University (Argentina) in collaboration with the company NOVA SA to unravel how QS signal sensing and degradation 'impacts on the relationship between NOVA'S inoculant with Az39 (named Promozion), polymicrobial biofilms and the plant. This is paramount to understand the mechanisms behind the positive impact it has on crop production providing the stepping-stone required to improve natural inoculants using this bacterium for a wider use in agriculture in Argentina and other countries. The project will provide Dr. Gaston Lopez the know-how for the characterisation of QS inhibitory bacteria and the impact this has on plant growth and protection against diseases which he would take back to NOVA SA and Rio Cuarto University for the optimisation of inoculants for field trials. This project aligns with the Industrial Strategy Challenge Fund on Transforming Food Production through exploitation of natural inoculants and 101C Engineer theme. The long-term aims will be to improve agricultural productivity reducing the use of chemical treatments and hence their impact in the environment.
Collaborator Contribution Benefits to the Researcher: Dr. Gaston Lopez will gain know-how on the characterisation of quorum quenching bacteria including analytical chemistry techniques, construction of transcriptional fusions, tagging of bacteria for polymicrobial biofilms analysis, use of biofilms models and confocal microscopy, and determination of the specificity of QS receptors. Benefits to NBIC 1. Research in food security is at the heart of NOVA SA and Rio Cuarto University through their research expertise on bacterial-plant interactions and the optimisation of inoculants. NBIC will benefit through the delivery of sustainable solutions to global food challenges increasing the international research portfolio of this Centre. 2. It will lead to long-term collaborations between NBIC and the Argentinian applicants through applications to emerging calls from UKRI to enhance links with Argentina and the GCRF in the strategic area of sustainable agriculture. 3. Dr. Gaston Lopez will be giving seminars to NBIC researchers during his visit to Nottingham and explore future collaborations between NOVA SA the University of Rio Cuarto and NBIC. Benefits to the UK It will strengthen links with Argentina through access to the unique infrastructure for research on maize, wheat and soybean production, being one of the largest producers in the world. Especially as the PGPR studied in this project is a major inoculant for both crops used by NOVA SA. This project will contribute to the UK cross-government programme on Global Food Security research and the outcomes are likely to be translated into UK crops to reduce the use chemical fertilizers and pesticides. Benefits to Argentina The benefits to NOVA SA in particular and more generally to Argentina will be directly related to aiding the improvement of biofertilizers and biostimulants formulated with Azospirillum brasilense Az39 for the biological treatment of maize, wheat and soybean seeds or seedlings. The understanding of how the "cell to cell" communication mechanisms mediated by "quorum" signals modify the behaviour of this bacterium under agronomic conditions will become a "key tool" to improve the formulation of current commercial products with improved bacterial inoculant combinations, making them more efficient to promote plant growth under field conditions. The benefits will be reflected in the consolidation of an experimental line for this Argentinian team (NOVA SA and Rio Cuarto University), which yea entail an increase in the timber of specific joint publications with Nottingham University and the establishment of inks with NBIC for longer term collaborations.
Impact Although covid-19 reduced the time of my stay at Nottingham, I was able to make progress in the generation of some of the recombinant clones required to advance the understanding of the quorum sensing(QS)-quorum quenching (QS) system present in the plant growth promoting rhizobacteria (PGPR) A. brasilense Az39 with a view to study the impact of this system in crops inoculants. This was my trip outside Argentina and my stay at the Nottingham NBIC labs enabled me to acquire expertise in new molecular biology and analytical chemistry techniques. It also gave me the exposure to a very distinct way of working with opportunities to interact with scientists working in many disciplines but specially on biofilm research. This has also strengthened my CV and enabled me to apply for a permanent position as a CONICET researcher at the Universidad Nacional de Río Cuarto (application still under evaluation). Furthermore, the experience acquired during my stay allowed me to take on a part-time job as junior researcher in NOVA SA, the partner company who supported my FTMA application and work on the production of biofertilizers and in particular the strain I used in this project. NOVA SA is very interested in the project that I carried out during my stay at Nottingham. To enable me to continue with this project I have been given a PhD student, Sofía Nievas, who received a PhD scholarship from CONICET at the Universidad Nacional de Río Cuarto. This will ensure the continuation of the collaboration with Nottingham. Overall, my stay at an NBIC institution through this FTMA award, has allowed to lay the foundations to consolidate a longer-term international collaboration between Argentina (CONICET and UNRC) and the UK. We will continue to study how the QQ capacity of A. brasilense Az39 plays a role in the rhizosphere of crops and how this capacity can be exploited to develop new biofertilizers.
Start Year 2019
 
Description NBIC FTMA Fellowship F_19_01 Impact of the potential interfering of Azospirillum brasilense Az39, one of the most used strains in agriculture inoculants in Argentina in polymicrobial biofilms and their interaction with the plant.(Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Studies in crop production require using novel strategies with low environmental impact. Some bacterial biofilms when associated with plant roots promote crop production (Plant Growth Promoting Rhizobacteria or PGPR) protecting them against environmental stress and diseases. Key for these interactions are small bacterial signal molecules which control the production of traits beneficial to the plant by a process known as quorum sensing (QS). Some bacterial plant pathogens also produce QS signals to trigger disease processes. Azospirillum brasilense Az39 is a key PGPR which can fix nitrogen for the plant and produce hormones which affect plant growth. It can degrade QS molecules and hence has potential to inactivate plant pathogens but also has the machinery to detect QS molecules although we still do not know how this affects the interaction with the plant. This fellowship will provide the required training to Dr. Gaston Lopez working at Rio Cuarto University (Argentina) in collaboration with the company NOVA SA to unravel how QS signal sensing and degradation 'impacts on the relationship between NOVA'S inoculant with Az39 (named Promozion), polymicrobial biofilms and the plant. This is paramount to understand the mechanisms behind the positive impact it has on crop production providing the stepping-stone required to improve natural inoculants using this bacterium for a wider use in agriculture in Argentina and other countries. The project will provide Dr. Gaston Lopez the know-how for the characterisation of QS inhibitory bacteria and the impact this has on plant growth and protection against diseases which he would take back to NOVA SA and Rio Cuarto University for the optimisation of inoculants for field trials. This project aligns with the Industrial Strategy Challenge Fund on Transforming Food Production through exploitation of natural inoculants and 101C Engineer theme. The long-term aims will be to improve agricultural productivity reducing the use of chemical treatments and hence their impact in the environment.
Collaborator Contribution Benefits to the Researcher: Dr. Gaston Lopez will gain know-how on the characterisation of quorum quenching bacteria including analytical chemistry techniques, construction of transcriptional fusions, tagging of bacteria for polymicrobial biofilms analysis, use of biofilms models and confocal microscopy, and determination of the specificity of QS receptors. Benefits to NBIC 1. Research in food security is at the heart of NOVA SA and Rio Cuarto University through their research expertise on bacterial-plant interactions and the optimisation of inoculants. NBIC will benefit through the delivery of sustainable solutions to global food challenges increasing the international research portfolio of this Centre. 2. It will lead to long-term collaborations between NBIC and the Argentinian applicants through applications to emerging calls from UKRI to enhance links with Argentina and the GCRF in the strategic area of sustainable agriculture. 3. Dr. Gaston Lopez will be giving seminars to NBIC researchers during his visit to Nottingham and explore future collaborations between NOVA SA the University of Rio Cuarto and NBIC. Benefits to the UK It will strengthen links with Argentina through access to the unique infrastructure for research on maize, wheat and soybean production, being one of the largest producers in the world. Especially as the PGPR studied in this project is a major inoculant for both crops used by NOVA SA. This project will contribute to the UK cross-government programme on Global Food Security research and the outcomes are likely to be translated into UK crops to reduce the use chemical fertilizers and pesticides. Benefits to Argentina The benefits to NOVA SA in particular and more generally to Argentina will be directly related to aiding the improvement of biofertilizers and biostimulants formulated with Azospirillum brasilense Az39 for the biological treatment of maize, wheat and soybean seeds or seedlings. The understanding of how the "cell to cell" communication mechanisms mediated by "quorum" signals modify the behaviour of this bacterium under agronomic conditions will become a "key tool" to improve the formulation of current commercial products with improved bacterial inoculant combinations, making them more efficient to promote plant growth under field conditions. The benefits will be reflected in the consolidation of an experimental line for this Argentinian team (NOVA SA and Rio Cuarto University), which yea entail an increase in the timber of specific joint publications with Nottingham University and the establishment of inks with NBIC for longer term collaborations.
Impact Although covid-19 reduced the time of my stay at Nottingham, I was able to make progress in the generation of some of the recombinant clones required to advance the understanding of the quorum sensing(QS)-quorum quenching (QS) system present in the plant growth promoting rhizobacteria (PGPR) A. brasilense Az39 with a view to study the impact of this system in crops inoculants. This was my trip outside Argentina and my stay at the Nottingham NBIC labs enabled me to acquire expertise in new molecular biology and analytical chemistry techniques. It also gave me the exposure to a very distinct way of working with opportunities to interact with scientists working in many disciplines but specially on biofilm research. This has also strengthened my CV and enabled me to apply for a permanent position as a CONICET researcher at the Universidad Nacional de Río Cuarto (application still under evaluation). Furthermore, the experience acquired during my stay allowed me to take on a part-time job as junior researcher in NOVA SA, the partner company who supported my FTMA application and work on the production of biofertilizers and in particular the strain I used in this project. NOVA SA is very interested in the project that I carried out during my stay at Nottingham. To enable me to continue with this project I have been given a PhD student, Sofía Nievas, who received a PhD scholarship from CONICET at the Universidad Nacional de Río Cuarto. This will ensure the continuation of the collaboration with Nottingham. Overall, my stay at an NBIC institution through this FTMA award, has allowed to lay the foundations to consolidate a longer-term international collaboration between Argentina (CONICET and UNRC) and the UK. We will continue to study how the QQ capacity of A. brasilense Az39 plays a role in the rhizosphere of crops and how this capacity can be exploited to develop new biofertilizers.
Start Year 2019
 
Description NBIC FTMA Fellowship F_19_2_17 Organoids-on-a-chip for detecting and understanding biofilm formation in polymicrobial cystic fibrosis infections (José Juan-Colás) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Identifying and quantifying virulence, communication and antibiotic resistance in polymicrobial communities is crucial for understanding infection, improving diagnostics and for the development of targeted, personalised therapies. While current standardised Omics methods provide taxonomic specificity, they are destructive and lack spatiotemporal resolution for dynamically mapping early-biofilm formation in living bacterial communities. New technology is required that can non-destructively and rapidly quantify biofilm formation within the host-specific ecological conditions. This technology would enable testing of fundamental microbiological and clinically relevant questions, inform new diagnostic tools and enable screening of antimicrobial therapies, ultimately accelerating the detection of disease and developing leading-edge healthcare. By combining multi-modal spectroscopy (optical and electrochemical) and microfluidics, I am currently developing technology to spatiotemporally map early-biofilm formation in a system that mimics the ecological and environmental conditions of the Cystic Fibrosis(CF) lung. However, due to the absence of bacterial-host interactions, the phenotypic response of these CF-polymicrobial cultures differs from that observed in CF-patients. To fully understand communities in CF it is thus necessary to recreate the precise niche conditions, including interactions with host-cells. To achieve this, I will visit Prof. Molin in DTU(Denmark), who is an established international leader in the field of infectious chronic obstructive pulmonary disease. Prof. Molin is currently developing miniature organ models (organoids) in order to accurately mimic the natural environment of the CF-lung more closely than current 'test-tube' models of infection. This NBIC funding will allow me to engage with Prof. Molin and his team and to develop expertise in culturing epithelial stem cells into organoid models of human lung tissue. This expertise will subsequently be transferred to York to enhance on-going research in CF-biofilms. The know-how developed through this project would underpin follow-on research with foci in (a)novel tools to improve diagnosis and treatment of CF-bacterial infections and (b)understanding biofilm formation and bacteria-host interactions in CF-lungs.
Collaborator Contribution This project will provide a number of quantitative and qualitative benefits to my research, professional development and ultimately to different people at the University of York and the university itself. The successful realisation of this award will complement my expertise in engineering and physical sciences by allowing me to immerse myself in a clinically focussed research group specialising in experimental microbiology. This NBIC award will also help to position York at the forefront of clinical research and create new links between York and DTU through a long-lasting collaboration. The integration of organoid models of lung tissue with my novel analytical technologies will provide a new approach to study and understand CF in a realistic mimic of lung environments This will greatly enhance the clinical relevance of my current research on early-biofilm formation of model CF polymicrobial communities (which comprise Pseudomonas aureginosa, Staphylococcus aureus and Stenotrophomonas maltophilia), and allow my research to be published in high impact factor journals. Moreover, it would pave the way to generate the first publication, if not the first one of this kind that shows how realistic biofilm formation naturally occurs in a controlled system that reproduces the CF patients' microbiota and pathogen-host interactions. Upon completion of this award, the knowledge and skillset acquired to culture organoids, control the biochemical microenvironment of lung organoids, optimise the required nutrient supply and tailor the biophysical microenvironment would ultimately be transferred to York. Bringing this expertise to my current institution will directly enhance the activities of my local collaborators, Ville Friman and Michael Bottery, and expose them to new areas of research. The Friman and Bottery groups have already expressed an interest in employing the lung CF organoid in their research focussed on understanding how the CF focal pathogen (P. aeruginosa) evolves and adapts in the CF lung due to local microbiota and nutrient availability. This collaboration would be mutually beneficial, as my developed multi-modal sensing technology optimised for polymicrobial communities will complement the Molin group experimental capabilities. Specifically, it will allow his group to assess the mechanism and efficacy of novel targeted treatments of respiratory CF infections, in real-time and non-invasively. Thus, a visit to his lab would help establish a long-lasting collaboration and enable detailed and lengthy discussions with the group's members in order to support my upcoming Sir Henry Dale fellowship application with him as the principal collaborator, grounded in challenges in the field.
Impact We generated preliminary data and initially explored the viability of human enteroids to investigate early-biofilm formation in cystic fibrosis lung infections. We aim to use this data to (i) apply for a responsive mode grant with myself as the technical collaborator (lead by Soren Molin at DTU) and (ii) underpin a Sir Henry Dale fellowship application focused on developing a real-time, localised phenotyping technology based on a combination of Raman microscopy, machine learning and microfluidics. I also plan to further strengthen this preliminary data and carry out follow-up experiments in York to produce a joint publication that demonstrates how this technology that can spatiotemporally map pyocyanin regulation in realistic CF lung infections. Moreover, I engaged with individuals from a number of DTU health technology research groups to share expertise in developing different fluidic systems. This was very insightful to critically assess the viability of complementary microfluidic techniques (namely 3D printing and the in-house developed spin-disk approach) for studying biofilm formation in lung CF infections.
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_17 Organoids-on-a-chip for detecting and understanding biofilm formation in polymicrobial cystic fibrosis infections (José Juan-Colás) 
Organisation Technical University of Denmark
Country Denmark 
Sector Academic/University 
PI Contribution Identifying and quantifying virulence, communication and antibiotic resistance in polymicrobial communities is crucial for understanding infection, improving diagnostics and for the development of targeted, personalised therapies. While current standardised Omics methods provide taxonomic specificity, they are destructive and lack spatiotemporal resolution for dynamically mapping early-biofilm formation in living bacterial communities. New technology is required that can non-destructively and rapidly quantify biofilm formation within the host-specific ecological conditions. This technology would enable testing of fundamental microbiological and clinically relevant questions, inform new diagnostic tools and enable screening of antimicrobial therapies, ultimately accelerating the detection of disease and developing leading-edge healthcare. By combining multi-modal spectroscopy (optical and electrochemical) and microfluidics, I am currently developing technology to spatiotemporally map early-biofilm formation in a system that mimics the ecological and environmental conditions of the Cystic Fibrosis(CF) lung. However, due to the absence of bacterial-host interactions, the phenotypic response of these CF-polymicrobial cultures differs from that observed in CF-patients. To fully understand communities in CF it is thus necessary to recreate the precise niche conditions, including interactions with host-cells. To achieve this, I will visit Prof. Molin in DTU(Denmark), who is an established international leader in the field of infectious chronic obstructive pulmonary disease. Prof. Molin is currently developing miniature organ models (organoids) in order to accurately mimic the natural environment of the CF-lung more closely than current 'test-tube' models of infection. This NBIC funding will allow me to engage with Prof. Molin and his team and to develop expertise in culturing epithelial stem cells into organoid models of human lung tissue. This expertise will subsequently be transferred to York to enhance on-going research in CF-biofilms. The know-how developed through this project would underpin follow-on research with foci in (a)novel tools to improve diagnosis and treatment of CF-bacterial infections and (b)understanding biofilm formation and bacteria-host interactions in CF-lungs.
Collaborator Contribution This project will provide a number of quantitative and qualitative benefits to my research, professional development and ultimately to different people at the University of York and the university itself. The successful realisation of this award will complement my expertise in engineering and physical sciences by allowing me to immerse myself in a clinically focussed research group specialising in experimental microbiology. This NBIC award will also help to position York at the forefront of clinical research and create new links between York and DTU through a long-lasting collaboration. The integration of organoid models of lung tissue with my novel analytical technologies will provide a new approach to study and understand CF in a realistic mimic of lung environments This will greatly enhance the clinical relevance of my current research on early-biofilm formation of model CF polymicrobial communities (which comprise Pseudomonas aureginosa, Staphylococcus aureus and Stenotrophomonas maltophilia), and allow my research to be published in high impact factor journals. Moreover, it would pave the way to generate the first publication, if not the first one of this kind that shows how realistic biofilm formation naturally occurs in a controlled system that reproduces the CF patients' microbiota and pathogen-host interactions. Upon completion of this award, the knowledge and skillset acquired to culture organoids, control the biochemical microenvironment of lung organoids, optimise the required nutrient supply and tailor the biophysical microenvironment would ultimately be transferred to York. Bringing this expertise to my current institution will directly enhance the activities of my local collaborators, Ville Friman and Michael Bottery, and expose them to new areas of research. The Friman and Bottery groups have already expressed an interest in employing the lung CF organoid in their research focussed on understanding how the CF focal pathogen (P. aeruginosa) evolves and adapts in the CF lung due to local microbiota and nutrient availability. This collaboration would be mutually beneficial, as my developed multi-modal sensing technology optimised for polymicrobial communities will complement the Molin group experimental capabilities. Specifically, it will allow his group to assess the mechanism and efficacy of novel targeted treatments of respiratory CF infections, in real-time and non-invasively. Thus, a visit to his lab would help establish a long-lasting collaboration and enable detailed and lengthy discussions with the group's members in order to support my upcoming Sir Henry Dale fellowship application with him as the principal collaborator, grounded in challenges in the field.
Impact We generated preliminary data and initially explored the viability of human enteroids to investigate early-biofilm formation in cystic fibrosis lung infections. We aim to use this data to (i) apply for a responsive mode grant with myself as the technical collaborator (lead by Soren Molin at DTU) and (ii) underpin a Sir Henry Dale fellowship application focused on developing a real-time, localised phenotyping technology based on a combination of Raman microscopy, machine learning and microfluidics. I also plan to further strengthen this preliminary data and carry out follow-up experiments in York to produce a joint publication that demonstrates how this technology that can spatiotemporally map pyocyanin regulation in realistic CF lung infections. Moreover, I engaged with individuals from a number of DTU health technology research groups to share expertise in developing different fluidic systems. This was very insightful to critically assess the viability of complementary microfluidic techniques (namely 3D printing and the in-house developed spin-disk approach) for studying biofilm formation in lung CF infections.
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_17 Organoids-on-a-chip for detecting and understanding biofilm formation in polymicrobial cystic fibrosis infections (José Juan-Colás) 
Organisation University of York
Country United Kingdom 
Sector Academic/University 
PI Contribution Identifying and quantifying virulence, communication and antibiotic resistance in polymicrobial communities is crucial for understanding infection, improving diagnostics and for the development of targeted, personalised therapies. While current standardised Omics methods provide taxonomic specificity, they are destructive and lack spatiotemporal resolution for dynamically mapping early-biofilm formation in living bacterial communities. New technology is required that can non-destructively and rapidly quantify biofilm formation within the host-specific ecological conditions. This technology would enable testing of fundamental microbiological and clinically relevant questions, inform new diagnostic tools and enable screening of antimicrobial therapies, ultimately accelerating the detection of disease and developing leading-edge healthcare. By combining multi-modal spectroscopy (optical and electrochemical) and microfluidics, I am currently developing technology to spatiotemporally map early-biofilm formation in a system that mimics the ecological and environmental conditions of the Cystic Fibrosis(CF) lung. However, due to the absence of bacterial-host interactions, the phenotypic response of these CF-polymicrobial cultures differs from that observed in CF-patients. To fully understand communities in CF it is thus necessary to recreate the precise niche conditions, including interactions with host-cells. To achieve this, I will visit Prof. Molin in DTU(Denmark), who is an established international leader in the field of infectious chronic obstructive pulmonary disease. Prof. Molin is currently developing miniature organ models (organoids) in order to accurately mimic the natural environment of the CF-lung more closely than current 'test-tube' models of infection. This NBIC funding will allow me to engage with Prof. Molin and his team and to develop expertise in culturing epithelial stem cells into organoid models of human lung tissue. This expertise will subsequently be transferred to York to enhance on-going research in CF-biofilms. The know-how developed through this project would underpin follow-on research with foci in (a)novel tools to improve diagnosis and treatment of CF-bacterial infections and (b)understanding biofilm formation and bacteria-host interactions in CF-lungs.
Collaborator Contribution This project will provide a number of quantitative and qualitative benefits to my research, professional development and ultimately to different people at the University of York and the university itself. The successful realisation of this award will complement my expertise in engineering and physical sciences by allowing me to immerse myself in a clinically focussed research group specialising in experimental microbiology. This NBIC award will also help to position York at the forefront of clinical research and create new links between York and DTU through a long-lasting collaboration. The integration of organoid models of lung tissue with my novel analytical technologies will provide a new approach to study and understand CF in a realistic mimic of lung environments This will greatly enhance the clinical relevance of my current research on early-biofilm formation of model CF polymicrobial communities (which comprise Pseudomonas aureginosa, Staphylococcus aureus and Stenotrophomonas maltophilia), and allow my research to be published in high impact factor journals. Moreover, it would pave the way to generate the first publication, if not the first one of this kind that shows how realistic biofilm formation naturally occurs in a controlled system that reproduces the CF patients' microbiota and pathogen-host interactions. Upon completion of this award, the knowledge and skillset acquired to culture organoids, control the biochemical microenvironment of lung organoids, optimise the required nutrient supply and tailor the biophysical microenvironment would ultimately be transferred to York. Bringing this expertise to my current institution will directly enhance the activities of my local collaborators, Ville Friman and Michael Bottery, and expose them to new areas of research. The Friman and Bottery groups have already expressed an interest in employing the lung CF organoid in their research focussed on understanding how the CF focal pathogen (P. aeruginosa) evolves and adapts in the CF lung due to local microbiota and nutrient availability. This collaboration would be mutually beneficial, as my developed multi-modal sensing technology optimised for polymicrobial communities will complement the Molin group experimental capabilities. Specifically, it will allow his group to assess the mechanism and efficacy of novel targeted treatments of respiratory CF infections, in real-time and non-invasively. Thus, a visit to his lab would help establish a long-lasting collaboration and enable detailed and lengthy discussions with the group's members in order to support my upcoming Sir Henry Dale fellowship application with him as the principal collaborator, grounded in challenges in the field.
Impact We generated preliminary data and initially explored the viability of human enteroids to investigate early-biofilm formation in cystic fibrosis lung infections. We aim to use this data to (i) apply for a responsive mode grant with myself as the technical collaborator (lead by Soren Molin at DTU) and (ii) underpin a Sir Henry Dale fellowship application focused on developing a real-time, localised phenotyping technology based on a combination of Raman microscopy, machine learning and microfluidics. I also plan to further strengthen this preliminary data and carry out follow-up experiments in York to produce a joint publication that demonstrates how this technology that can spatiotemporally map pyocyanin regulation in realistic CF lung infections. Moreover, I engaged with individuals from a number of DTU health technology research groups to share expertise in developing different fluidic systems. This was very insightful to critically assess the viability of complementary microfluidic techniques (namely 3D printing and the in-house developed spin-disk approach) for studying biofilm formation in lung CF infections.
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_31 Engineering cyanobacteria biofilms to transform production of aqua- and agri-culture feedstocks (Sarah Rouse) 
Organisation Cyanofeed Ltd
Country United Kingdom 
Sector Private 
PI Contribution The aim of the partnership is to optimise a new method for aqua- and agri-culture feedstock production, by using engineered biofilm-forming cyanobacteria as a food source. This 2 month industry-based project will bring together elements of academic research and industrial processes. This project is aligned to the UKRI Transforming Food Production Industry Challenge. Production of animal feed is ecologically damaging, and expensive. Fishmeal is usually derived from ocean prey fish and their stocks are being depleted. Using cyanobacteria and micro algae has been attempted in the past but farmed fish including salmon and trout are unable to digest large quantities because of the exopolysaccharides - important components of biofilm. Cyanofeed are engineering new strains to keep the beneficial aspects of biofilm whilst making them readily digestible to the fish. I will work with them to optimise these variants, using on site testing to determine microbial composition and the best methods to improve efficiency in harvesting and downstream processing. In the longer term, these same processes could potentially be used to make renewable protein sources for human consumption. Being awarded this NBIC Innovation Fellowship would pave the way for future translational research partnerships with industry. It will provide a foundation in the steps required for successful commercialisation of lab based work. I have a deep understanding of the underlying science of biofilm formation, but have limited experience of working in an industrial environment, in particular, the challenges associated with large scale production. Furthermore, being based at an early-stage biotech startup will involve exposure to more varied aspects of working within industry that I may not experience at a larger company.
Collaborator Contribution within a start-up will also allow me to be involved in company expansion and provides potential for long-term partnership. • Immediate potential collaboration: The 2 month secondment is expected to be the beginning of a longterm partnership. • Joint publications: Expect to publish a white paper on this method and present outcomes at research conferences. • Societal and economic impact: This fellowship will have both societal and economic impact. Finding new ways to make renewable protein sources in feedstock production is a high priority area of research. • Translational applications will arise from our understanding of how the engineered biofilm strains behave, and new insight into which properties of biofilm are beneficial for nutrition.
Impact We have designed a robust testing approach which will benefit the production of modified feedstocks. This is the first, measurable step within an important area of research which will have both societal and economic impact in the medium to long-term. Finding new ways to make renewable protein sources in feedstock production is a high priority area of research. We also expect to develop our testing protocols for translational applications that will arise from our understanding of how the engineered biofilm strains behave, and new insight into which properties of biofilm are beneficial for nutrition. This project is aligned to the UKRI Transforming Food Production Industry Challenge. The protocols designed during the FTMA Innovation Fellowship will be implemented in the next round of feeding trials. This Innovation Fellowship was intended to lay the groundwork for a longer-term partnership. The resources and support available from NBIC will be beneficial going forwards, and we hope to be able to attend any future training workshops.
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_31 Engineering cyanobacteria biofilms to transform production of aqua- and agri-culture feedstocks (Sarah Rouse) 
Organisation Imperial College London
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of the partnership is to optimise a new method for aqua- and agri-culture feedstock production, by using engineered biofilm-forming cyanobacteria as a food source. This 2 month industry-based project will bring together elements of academic research and industrial processes. This project is aligned to the UKRI Transforming Food Production Industry Challenge. Production of animal feed is ecologically damaging, and expensive. Fishmeal is usually derived from ocean prey fish and their stocks are being depleted. Using cyanobacteria and micro algae has been attempted in the past but farmed fish including salmon and trout are unable to digest large quantities because of the exopolysaccharides - important components of biofilm. Cyanofeed are engineering new strains to keep the beneficial aspects of biofilm whilst making them readily digestible to the fish. I will work with them to optimise these variants, using on site testing to determine microbial composition and the best methods to improve efficiency in harvesting and downstream processing. In the longer term, these same processes could potentially be used to make renewable protein sources for human consumption. Being awarded this NBIC Innovation Fellowship would pave the way for future translational research partnerships with industry. It will provide a foundation in the steps required for successful commercialisation of lab based work. I have a deep understanding of the underlying science of biofilm formation, but have limited experience of working in an industrial environment, in particular, the challenges associated with large scale production. Furthermore, being based at an early-stage biotech startup will involve exposure to more varied aspects of working within industry that I may not experience at a larger company.
Collaborator Contribution within a start-up will also allow me to be involved in company expansion and provides potential for long-term partnership. • Immediate potential collaboration: The 2 month secondment is expected to be the beginning of a longterm partnership. • Joint publications: Expect to publish a white paper on this method and present outcomes at research conferences. • Societal and economic impact: This fellowship will have both societal and economic impact. Finding new ways to make renewable protein sources in feedstock production is a high priority area of research. • Translational applications will arise from our understanding of how the engineered biofilm strains behave, and new insight into which properties of biofilm are beneficial for nutrition.
Impact We have designed a robust testing approach which will benefit the production of modified feedstocks. This is the first, measurable step within an important area of research which will have both societal and economic impact in the medium to long-term. Finding new ways to make renewable protein sources in feedstock production is a high priority area of research. We also expect to develop our testing protocols for translational applications that will arise from our understanding of how the engineered biofilm strains behave, and new insight into which properties of biofilm are beneficial for nutrition. This project is aligned to the UKRI Transforming Food Production Industry Challenge. The protocols designed during the FTMA Innovation Fellowship will be implemented in the next round of feeding trials. This Innovation Fellowship was intended to lay the groundwork for a longer-term partnership. The resources and support available from NBIC will be beneficial going forwards, and we hope to be able to attend any future training workshops.
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_31 Engineering cyanobacteria biofilms to transform production of aqua- and agri-culture feedstocks (Sarah Rouse) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of the partnership is to optimise a new method for aqua- and agri-culture feedstock production, by using engineered biofilm-forming cyanobacteria as a food source. This 2 month industry-based project will bring together elements of academic research and industrial processes. This project is aligned to the UKRI Transforming Food Production Industry Challenge. Production of animal feed is ecologically damaging, and expensive. Fishmeal is usually derived from ocean prey fish and their stocks are being depleted. Using cyanobacteria and micro algae has been attempted in the past but farmed fish including salmon and trout are unable to digest large quantities because of the exopolysaccharides - important components of biofilm. Cyanofeed are engineering new strains to keep the beneficial aspects of biofilm whilst making them readily digestible to the fish. I will work with them to optimise these variants, using on site testing to determine microbial composition and the best methods to improve efficiency in harvesting and downstream processing. In the longer term, these same processes could potentially be used to make renewable protein sources for human consumption. Being awarded this NBIC Innovation Fellowship would pave the way for future translational research partnerships with industry. It will provide a foundation in the steps required for successful commercialisation of lab based work. I have a deep understanding of the underlying science of biofilm formation, but have limited experience of working in an industrial environment, in particular, the challenges associated with large scale production. Furthermore, being based at an early-stage biotech startup will involve exposure to more varied aspects of working within industry that I may not experience at a larger company.
Collaborator Contribution within a start-up will also allow me to be involved in company expansion and provides potential for long-term partnership. • Immediate potential collaboration: The 2 month secondment is expected to be the beginning of a longterm partnership. • Joint publications: Expect to publish a white paper on this method and present outcomes at research conferences. • Societal and economic impact: This fellowship will have both societal and economic impact. Finding new ways to make renewable protein sources in feedstock production is a high priority area of research. • Translational applications will arise from our understanding of how the engineered biofilm strains behave, and new insight into which properties of biofilm are beneficial for nutrition.
Impact We have designed a robust testing approach which will benefit the production of modified feedstocks. This is the first, measurable step within an important area of research which will have both societal and economic impact in the medium to long-term. Finding new ways to make renewable protein sources in feedstock production is a high priority area of research. We also expect to develop our testing protocols for translational applications that will arise from our understanding of how the engineered biofilm strains behave, and new insight into which properties of biofilm are beneficial for nutrition. This project is aligned to the UKRI Transforming Food Production Industry Challenge. The protocols designed during the FTMA Innovation Fellowship will be implemented in the next round of feeding trials. This Innovation Fellowship was intended to lay the groundwork for a longer-term partnership. The resources and support available from NBIC will be beneficial going forwards, and we hope to be able to attend any future training workshops.
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_41 Developing a clinically relevant phage cocktail against Klebsiella to prevent biofilm formation (Eleanor Jameson) 
Organisation Fixed phage limited
Country United Kingdom 
Sector Private 
PI Contribution Klebsiella are WHO Priority Pathogens, with a high incidence of antimicrobial resistance (AMR) genes, which can be transmitted to other bacteria. I have supplied phages for use in compassionate phagetherapy, and developed a phage-cocktail that prevents Klebsiella biofilm formation in a catheter model. My Innovation Fellowship aims: 1) I will work with clinical scientists to fully characterise my phage cocktail. The biggest obstacle in compassionate use of phage to treat infection is time: testing the efficacy of large numbers of phages, followed by characterisation, takes 4-6 months so it is not a viable treatment option in most cases. By developing a characterised phage-cocktail, pre-tested on clinical Klebsiella isolates, I will provide a broadspectrum, safe, resource that will speed up the time it takes patients to get effective treatment. 2) Working with Fixed-phage Ltd (specialising in human health) I will develop a method to stably bind the phage cocktail to medical devices (e.g. catheters) and use in transmission hot-spots (hospital sinks), stabalising the phages to prevent life-threatening Klebsiella infections. 3) I will develop knowledge of clinical issues and hurdles to translate my current Klebsiella phage cocktail research, and future phage research, to a medical setting. Current hurdles to phage-therapy include: reproducible Good Manufacturing Practice (GMP) standard phage is difficult (available through JAFRAL, Slovenia); few clinical trials have been undertaken (<20); and ~80% of phage genes are unknown, making it challenging to exclude AMR, toxicity or integrase genes (no side-effects observed in compassionate phage-therapy involving my pre-screened phages). Therefore, I will focus on infection prevention and compassionate phage-therapy to circumvent the issues associated with using phages as a drug. This work fits the "leading edge healthcare" challenge, by allowing me to develop a broad-spectrum, safe, effective resource to prevent Klebsiella biofilms on medical devices and transmission hotspots, and for future compassionate phage-therapy.
Collaborator Contribution The expected outcomes of this mobility fellowship will take my current Klebsiella phage research into a clinical setting and increase my understanding of the hurdles involved. I will obtain currently circulating clinical Klebsiella isolates through collaborators Tim Felton and Stephanie Thomas, Wythenshawe Hospital and Surabhi Taori, Kings College Hospital. I will sequence these Klebsiella to analyse the diversity of the strains and understand their relatedness and origins. These isolates will allow me to determine the range and effectiveness of my phage-cocktail on circulating Klebsiella strains. By collaborating directly with clinicians and clinical scientists, I will gain a greater understanding of the challenges within hospitals involved in identifying Klebsiella. Such as the high frequency of coliform infections and time/budgeting constraints that limit pathogen identification, AMR carriage and outbreak strains, in addition to the constraints/restrictions related to AMR Klebsiella control measures. I will further develop my phage-cocktail into a robust, characterised phage-cocktail, rigorously tested against a wide range of circulating clinical Klebsiella. This work will build on my compassionate phagetherapy collaboration with Prof Mikael Skurnik, University of Helsinki. During our collaboration it has become clear that obtaining phages, screening phages against patient's Klebsiella strains, characterising phages, sequencing, checking genomes (for integrases, AMR and toxins) before designing a cocktail of 2-3 phages delays the application of phage-therapy to patients. I will collaborate with Fixed-phage to develop and test a cost-effective solution to fix my phage-cocktail to medical devices and transmission hot-spots. Together we will determine if the method can add value or will cause further hurdles and complications in preventing Klebsiella transmission. Initial testing will fix my phage-cocktail being fixed to the catheters, prior to optimisation. This will establish all components of the phage-cocktail remain viable for long enough to be effective after fixing. The pre-tested cocktail will be made available for compassionate phage-therapy to reduce the lead time between identifying a suitable patient and providing the patient with an effective treatment. More traditional academic outputs including publication of the Klebsiella strain diversity and efficacy of my initial phage-cocktail in catheters in high-impact open access journals e.g. Scientific reports, Antimicrobial Agents and Chemotherapy. These findings will also be presented at an international conference, e.g. Phage Futures Europe 2020. The findings of this work will contribute to future grant applications to commercialise the optimised phage-cocktail for use of an infection-control agent, such as CARB-X. University of Warwick: My expertise on phage therapy and potential against antimicrobial resistant bacteria. I am currently sequencing the bacterial strains they sent me and will provide them information on the genomes of the clinical bacterial isolates. Fixed phage limited: Fixed-Phage are providing staff time and resources for the preparation and testing of solid materials, including catheters with phages immobilised onto the surface. King's College Hospital: They have provided 20 strains each of E. coli and Klebsiella isolated from patients at King's College Hospital. Manchester Royal Infirmary: They have provided 75 strains of Klebsiella isolated from patients in Manchester.
Impact I have published the work showing that my phage isolates can prevent Klebsiella biofilms in catheters with a simple phage cocktail (crediting NBIC FMTA): E. Townsend, J. Moat, E. Jameson (2020) CAUTI's Next Top Model - model dependent Klebsiella biofilm inhibition by bacteriophages and antimicrobials. Biofilm doi: 10.1016/j.bioflm.2020.100038 The funding has enabled me to make connections with Wythenshawe and King's College Hospital which have been helpful to understand what Klebsiella strains are currently circulating and obtain expert advice on what is possible in hospitals. The working relationship with Fixed-phage Ltd has been fruitful and we have identified some potential stumbling blocks. The preliminary data will be vital in applying for the next stage of funding to use phages on medical devices. Funding will be sort to protect the IP for the phage cocktail and phage coated catheter. The cocktail will be patentable as the optimised phage cocktail will not be published at the time (previous published work has included some inefficient phage cocktails, therefore I have not compromised the IP).
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_41 Developing a clinically relevant phage cocktail against Klebsiella to prevent biofilm formation (Eleanor Jameson) 
Organisation King's College Hospital
Country United Kingdom 
Sector Hospitals 
PI Contribution Klebsiella are WHO Priority Pathogens, with a high incidence of antimicrobial resistance (AMR) genes, which can be transmitted to other bacteria. I have supplied phages for use in compassionate phagetherapy, and developed a phage-cocktail that prevents Klebsiella biofilm formation in a catheter model. My Innovation Fellowship aims: 1) I will work with clinical scientists to fully characterise my phage cocktail. The biggest obstacle in compassionate use of phage to treat infection is time: testing the efficacy of large numbers of phages, followed by characterisation, takes 4-6 months so it is not a viable treatment option in most cases. By developing a characterised phage-cocktail, pre-tested on clinical Klebsiella isolates, I will provide a broadspectrum, safe, resource that will speed up the time it takes patients to get effective treatment. 2) Working with Fixed-phage Ltd (specialising in human health) I will develop a method to stably bind the phage cocktail to medical devices (e.g. catheters) and use in transmission hot-spots (hospital sinks), stabalising the phages to prevent life-threatening Klebsiella infections. 3) I will develop knowledge of clinical issues and hurdles to translate my current Klebsiella phage cocktail research, and future phage research, to a medical setting. Current hurdles to phage-therapy include: reproducible Good Manufacturing Practice (GMP) standard phage is difficult (available through JAFRAL, Slovenia); few clinical trials have been undertaken (<20); and ~80% of phage genes are unknown, making it challenging to exclude AMR, toxicity or integrase genes (no side-effects observed in compassionate phage-therapy involving my pre-screened phages). Therefore, I will focus on infection prevention and compassionate phage-therapy to circumvent the issues associated with using phages as a drug. This work fits the "leading edge healthcare" challenge, by allowing me to develop a broad-spectrum, safe, effective resource to prevent Klebsiella biofilms on medical devices and transmission hotspots, and for future compassionate phage-therapy.
Collaborator Contribution The expected outcomes of this mobility fellowship will take my current Klebsiella phage research into a clinical setting and increase my understanding of the hurdles involved. I will obtain currently circulating clinical Klebsiella isolates through collaborators Tim Felton and Stephanie Thomas, Wythenshawe Hospital and Surabhi Taori, Kings College Hospital. I will sequence these Klebsiella to analyse the diversity of the strains and understand their relatedness and origins. These isolates will allow me to determine the range and effectiveness of my phage-cocktail on circulating Klebsiella strains. By collaborating directly with clinicians and clinical scientists, I will gain a greater understanding of the challenges within hospitals involved in identifying Klebsiella. Such as the high frequency of coliform infections and time/budgeting constraints that limit pathogen identification, AMR carriage and outbreak strains, in addition to the constraints/restrictions related to AMR Klebsiella control measures. I will further develop my phage-cocktail into a robust, characterised phage-cocktail, rigorously tested against a wide range of circulating clinical Klebsiella. This work will build on my compassionate phagetherapy collaboration with Prof Mikael Skurnik, University of Helsinki. During our collaboration it has become clear that obtaining phages, screening phages against patient's Klebsiella strains, characterising phages, sequencing, checking genomes (for integrases, AMR and toxins) before designing a cocktail of 2-3 phages delays the application of phage-therapy to patients. I will collaborate with Fixed-phage to develop and test a cost-effective solution to fix my phage-cocktail to medical devices and transmission hot-spots. Together we will determine if the method can add value or will cause further hurdles and complications in preventing Klebsiella transmission. Initial testing will fix my phage-cocktail being fixed to the catheters, prior to optimisation. This will establish all components of the phage-cocktail remain viable for long enough to be effective after fixing. The pre-tested cocktail will be made available for compassionate phage-therapy to reduce the lead time between identifying a suitable patient and providing the patient with an effective treatment. More traditional academic outputs including publication of the Klebsiella strain diversity and efficacy of my initial phage-cocktail in catheters in high-impact open access journals e.g. Scientific reports, Antimicrobial Agents and Chemotherapy. These findings will also be presented at an international conference, e.g. Phage Futures Europe 2020. The findings of this work will contribute to future grant applications to commercialise the optimised phage-cocktail for use of an infection-control agent, such as CARB-X. University of Warwick: My expertise on phage therapy and potential against antimicrobial resistant bacteria. I am currently sequencing the bacterial strains they sent me and will provide them information on the genomes of the clinical bacterial isolates. Fixed phage limited: Fixed-Phage are providing staff time and resources for the preparation and testing of solid materials, including catheters with phages immobilised onto the surface. King's College Hospital: They have provided 20 strains each of E. coli and Klebsiella isolated from patients at King's College Hospital. Manchester Royal Infirmary: They have provided 75 strains of Klebsiella isolated from patients in Manchester.
Impact I have published the work showing that my phage isolates can prevent Klebsiella biofilms in catheters with a simple phage cocktail (crediting NBIC FMTA): E. Townsend, J. Moat, E. Jameson (2020) CAUTI's Next Top Model - model dependent Klebsiella biofilm inhibition by bacteriophages and antimicrobials. Biofilm doi: 10.1016/j.bioflm.2020.100038 The funding has enabled me to make connections with Wythenshawe and King's College Hospital which have been helpful to understand what Klebsiella strains are currently circulating and obtain expert advice on what is possible in hospitals. The working relationship with Fixed-phage Ltd has been fruitful and we have identified some potential stumbling blocks. The preliminary data will be vital in applying for the next stage of funding to use phages on medical devices. Funding will be sort to protect the IP for the phage cocktail and phage coated catheter. The cocktail will be patentable as the optimised phage cocktail will not be published at the time (previous published work has included some inefficient phage cocktails, therefore I have not compromised the IP).
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_41 Developing a clinically relevant phage cocktail against Klebsiella to prevent biofilm formation (Eleanor Jameson) 
Organisation Manchester University NHS Foundation Trust
Country United Kingdom 
Sector Public 
PI Contribution Klebsiella are WHO Priority Pathogens, with a high incidence of antimicrobial resistance (AMR) genes, which can be transmitted to other bacteria. I have supplied phages for use in compassionate phagetherapy, and developed a phage-cocktail that prevents Klebsiella biofilm formation in a catheter model. My Innovation Fellowship aims: 1) I will work with clinical scientists to fully characterise my phage cocktail. The biggest obstacle in compassionate use of phage to treat infection is time: testing the efficacy of large numbers of phages, followed by characterisation, takes 4-6 months so it is not a viable treatment option in most cases. By developing a characterised phage-cocktail, pre-tested on clinical Klebsiella isolates, I will provide a broadspectrum, safe, resource that will speed up the time it takes patients to get effective treatment. 2) Working with Fixed-phage Ltd (specialising in human health) I will develop a method to stably bind the phage cocktail to medical devices (e.g. catheters) and use in transmission hot-spots (hospital sinks), stabalising the phages to prevent life-threatening Klebsiella infections. 3) I will develop knowledge of clinical issues and hurdles to translate my current Klebsiella phage cocktail research, and future phage research, to a medical setting. Current hurdles to phage-therapy include: reproducible Good Manufacturing Practice (GMP) standard phage is difficult (available through JAFRAL, Slovenia); few clinical trials have been undertaken (<20); and ~80% of phage genes are unknown, making it challenging to exclude AMR, toxicity or integrase genes (no side-effects observed in compassionate phage-therapy involving my pre-screened phages). Therefore, I will focus on infection prevention and compassionate phage-therapy to circumvent the issues associated with using phages as a drug. This work fits the "leading edge healthcare" challenge, by allowing me to develop a broad-spectrum, safe, effective resource to prevent Klebsiella biofilms on medical devices and transmission hotspots, and for future compassionate phage-therapy.
Collaborator Contribution The expected outcomes of this mobility fellowship will take my current Klebsiella phage research into a clinical setting and increase my understanding of the hurdles involved. I will obtain currently circulating clinical Klebsiella isolates through collaborators Tim Felton and Stephanie Thomas, Wythenshawe Hospital and Surabhi Taori, Kings College Hospital. I will sequence these Klebsiella to analyse the diversity of the strains and understand their relatedness and origins. These isolates will allow me to determine the range and effectiveness of my phage-cocktail on circulating Klebsiella strains. By collaborating directly with clinicians and clinical scientists, I will gain a greater understanding of the challenges within hospitals involved in identifying Klebsiella. Such as the high frequency of coliform infections and time/budgeting constraints that limit pathogen identification, AMR carriage and outbreak strains, in addition to the constraints/restrictions related to AMR Klebsiella control measures. I will further develop my phage-cocktail into a robust, characterised phage-cocktail, rigorously tested against a wide range of circulating clinical Klebsiella. This work will build on my compassionate phagetherapy collaboration with Prof Mikael Skurnik, University of Helsinki. During our collaboration it has become clear that obtaining phages, screening phages against patient's Klebsiella strains, characterising phages, sequencing, checking genomes (for integrases, AMR and toxins) before designing a cocktail of 2-3 phages delays the application of phage-therapy to patients. I will collaborate with Fixed-phage to develop and test a cost-effective solution to fix my phage-cocktail to medical devices and transmission hot-spots. Together we will determine if the method can add value or will cause further hurdles and complications in preventing Klebsiella transmission. Initial testing will fix my phage-cocktail being fixed to the catheters, prior to optimisation. This will establish all components of the phage-cocktail remain viable for long enough to be effective after fixing. The pre-tested cocktail will be made available for compassionate phage-therapy to reduce the lead time between identifying a suitable patient and providing the patient with an effective treatment. More traditional academic outputs including publication of the Klebsiella strain diversity and efficacy of my initial phage-cocktail in catheters in high-impact open access journals e.g. Scientific reports, Antimicrobial Agents and Chemotherapy. These findings will also be presented at an international conference, e.g. Phage Futures Europe 2020. The findings of this work will contribute to future grant applications to commercialise the optimised phage-cocktail for use of an infection-control agent, such as CARB-X. University of Warwick: My expertise on phage therapy and potential against antimicrobial resistant bacteria. I am currently sequencing the bacterial strains they sent me and will provide them information on the genomes of the clinical bacterial isolates. Fixed phage limited: Fixed-Phage are providing staff time and resources for the preparation and testing of solid materials, including catheters with phages immobilised onto the surface. King's College Hospital: They have provided 20 strains each of E. coli and Klebsiella isolated from patients at King's College Hospital. Manchester Royal Infirmary: They have provided 75 strains of Klebsiella isolated from patients in Manchester.
Impact I have published the work showing that my phage isolates can prevent Klebsiella biofilms in catheters with a simple phage cocktail (crediting NBIC FMTA): E. Townsend, J. Moat, E. Jameson (2020) CAUTI's Next Top Model - model dependent Klebsiella biofilm inhibition by bacteriophages and antimicrobials. Biofilm doi: 10.1016/j.bioflm.2020.100038 The funding has enabled me to make connections with Wythenshawe and King's College Hospital which have been helpful to understand what Klebsiella strains are currently circulating and obtain expert advice on what is possible in hospitals. The working relationship with Fixed-phage Ltd has been fruitful and we have identified some potential stumbling blocks. The preliminary data will be vital in applying for the next stage of funding to use phages on medical devices. Funding will be sort to protect the IP for the phage cocktail and phage coated catheter. The cocktail will be patentable as the optimised phage cocktail will not be published at the time (previous published work has included some inefficient phage cocktails, therefore I have not compromised the IP).
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_41 Developing a clinically relevant phage cocktail against Klebsiella to prevent biofilm formation (Eleanor Jameson) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Klebsiella are WHO Priority Pathogens, with a high incidence of antimicrobial resistance (AMR) genes, which can be transmitted to other bacteria. I have supplied phages for use in compassionate phagetherapy, and developed a phage-cocktail that prevents Klebsiella biofilm formation in a catheter model. My Innovation Fellowship aims: 1) I will work with clinical scientists to fully characterise my phage cocktail. The biggest obstacle in compassionate use of phage to treat infection is time: testing the efficacy of large numbers of phages, followed by characterisation, takes 4-6 months so it is not a viable treatment option in most cases. By developing a characterised phage-cocktail, pre-tested on clinical Klebsiella isolates, I will provide a broadspectrum, safe, resource that will speed up the time it takes patients to get effective treatment. 2) Working with Fixed-phage Ltd (specialising in human health) I will develop a method to stably bind the phage cocktail to medical devices (e.g. catheters) and use in transmission hot-spots (hospital sinks), stabalising the phages to prevent life-threatening Klebsiella infections. 3) I will develop knowledge of clinical issues and hurdles to translate my current Klebsiella phage cocktail research, and future phage research, to a medical setting. Current hurdles to phage-therapy include: reproducible Good Manufacturing Practice (GMP) standard phage is difficult (available through JAFRAL, Slovenia); few clinical trials have been undertaken (<20); and ~80% of phage genes are unknown, making it challenging to exclude AMR, toxicity or integrase genes (no side-effects observed in compassionate phage-therapy involving my pre-screened phages). Therefore, I will focus on infection prevention and compassionate phage-therapy to circumvent the issues associated with using phages as a drug. This work fits the "leading edge healthcare" challenge, by allowing me to develop a broad-spectrum, safe, effective resource to prevent Klebsiella biofilms on medical devices and transmission hotspots, and for future compassionate phage-therapy.
Collaborator Contribution The expected outcomes of this mobility fellowship will take my current Klebsiella phage research into a clinical setting and increase my understanding of the hurdles involved. I will obtain currently circulating clinical Klebsiella isolates through collaborators Tim Felton and Stephanie Thomas, Wythenshawe Hospital and Surabhi Taori, Kings College Hospital. I will sequence these Klebsiella to analyse the diversity of the strains and understand their relatedness and origins. These isolates will allow me to determine the range and effectiveness of my phage-cocktail on circulating Klebsiella strains. By collaborating directly with clinicians and clinical scientists, I will gain a greater understanding of the challenges within hospitals involved in identifying Klebsiella. Such as the high frequency of coliform infections and time/budgeting constraints that limit pathogen identification, AMR carriage and outbreak strains, in addition to the constraints/restrictions related to AMR Klebsiella control measures. I will further develop my phage-cocktail into a robust, characterised phage-cocktail, rigorously tested against a wide range of circulating clinical Klebsiella. This work will build on my compassionate phagetherapy collaboration with Prof Mikael Skurnik, University of Helsinki. During our collaboration it has become clear that obtaining phages, screening phages against patient's Klebsiella strains, characterising phages, sequencing, checking genomes (for integrases, AMR and toxins) before designing a cocktail of 2-3 phages delays the application of phage-therapy to patients. I will collaborate with Fixed-phage to develop and test a cost-effective solution to fix my phage-cocktail to medical devices and transmission hot-spots. Together we will determine if the method can add value or will cause further hurdles and complications in preventing Klebsiella transmission. Initial testing will fix my phage-cocktail being fixed to the catheters, prior to optimisation. This will establish all components of the phage-cocktail remain viable for long enough to be effective after fixing. The pre-tested cocktail will be made available for compassionate phage-therapy to reduce the lead time between identifying a suitable patient and providing the patient with an effective treatment. More traditional academic outputs including publication of the Klebsiella strain diversity and efficacy of my initial phage-cocktail in catheters in high-impact open access journals e.g. Scientific reports, Antimicrobial Agents and Chemotherapy. These findings will also be presented at an international conference, e.g. Phage Futures Europe 2020. The findings of this work will contribute to future grant applications to commercialise the optimised phage-cocktail for use of an infection-control agent, such as CARB-X. University of Warwick: My expertise on phage therapy and potential against antimicrobial resistant bacteria. I am currently sequencing the bacterial strains they sent me and will provide them information on the genomes of the clinical bacterial isolates. Fixed phage limited: Fixed-Phage are providing staff time and resources for the preparation and testing of solid materials, including catheters with phages immobilised onto the surface. King's College Hospital: They have provided 20 strains each of E. coli and Klebsiella isolated from patients at King's College Hospital. Manchester Royal Infirmary: They have provided 75 strains of Klebsiella isolated from patients in Manchester.
Impact I have published the work showing that my phage isolates can prevent Klebsiella biofilms in catheters with a simple phage cocktail (crediting NBIC FMTA): E. Townsend, J. Moat, E. Jameson (2020) CAUTI's Next Top Model - model dependent Klebsiella biofilm inhibition by bacteriophages and antimicrobials. Biofilm doi: 10.1016/j.bioflm.2020.100038 The funding has enabled me to make connections with Wythenshawe and King's College Hospital which have been helpful to understand what Klebsiella strains are currently circulating and obtain expert advice on what is possible in hospitals. The working relationship with Fixed-phage Ltd has been fruitful and we have identified some potential stumbling blocks. The preliminary data will be vital in applying for the next stage of funding to use phages on medical devices. Funding will be sort to protect the IP for the phage cocktail and phage coated catheter. The cocktail will be patentable as the optimised phage cocktail will not be published at the time (previous published work has included some inefficient phage cocktails, therefore I have not compromised the IP).
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_41 Developing a clinically relevant phage cocktail against Klebsiella to prevent biofilm formation (Eleanor Jameson) 
Organisation University of Helsinki
Country Finland 
Sector Academic/University 
PI Contribution Klebsiella are WHO Priority Pathogens, with a high incidence of antimicrobial resistance (AMR) genes, which can be transmitted to other bacteria. I have supplied phages for use in compassionate phagetherapy, and developed a phage-cocktail that prevents Klebsiella biofilm formation in a catheter model. My Innovation Fellowship aims: 1) I will work with clinical scientists to fully characterise my phage cocktail. The biggest obstacle in compassionate use of phage to treat infection is time: testing the efficacy of large numbers of phages, followed by characterisation, takes 4-6 months so it is not a viable treatment option in most cases. By developing a characterised phage-cocktail, pre-tested on clinical Klebsiella isolates, I will provide a broadspectrum, safe, resource that will speed up the time it takes patients to get effective treatment. 2) Working with Fixed-phage Ltd (specialising in human health) I will develop a method to stably bind the phage cocktail to medical devices (e.g. catheters) and use in transmission hot-spots (hospital sinks), stabalising the phages to prevent life-threatening Klebsiella infections. 3) I will develop knowledge of clinical issues and hurdles to translate my current Klebsiella phage cocktail research, and future phage research, to a medical setting. Current hurdles to phage-therapy include: reproducible Good Manufacturing Practice (GMP) standard phage is difficult (available through JAFRAL, Slovenia); few clinical trials have been undertaken (<20); and ~80% of phage genes are unknown, making it challenging to exclude AMR, toxicity or integrase genes (no side-effects observed in compassionate phage-therapy involving my pre-screened phages). Therefore, I will focus on infection prevention and compassionate phage-therapy to circumvent the issues associated with using phages as a drug. This work fits the "leading edge healthcare" challenge, by allowing me to develop a broad-spectrum, safe, effective resource to prevent Klebsiella biofilms on medical devices and transmission hotspots, and for future compassionate phage-therapy.
Collaborator Contribution The expected outcomes of this mobility fellowship will take my current Klebsiella phage research into a clinical setting and increase my understanding of the hurdles involved. I will obtain currently circulating clinical Klebsiella isolates through collaborators Tim Felton and Stephanie Thomas, Wythenshawe Hospital and Surabhi Taori, Kings College Hospital. I will sequence these Klebsiella to analyse the diversity of the strains and understand their relatedness and origins. These isolates will allow me to determine the range and effectiveness of my phage-cocktail on circulating Klebsiella strains. By collaborating directly with clinicians and clinical scientists, I will gain a greater understanding of the challenges within hospitals involved in identifying Klebsiella. Such as the high frequency of coliform infections and time/budgeting constraints that limit pathogen identification, AMR carriage and outbreak strains, in addition to the constraints/restrictions related to AMR Klebsiella control measures. I will further develop my phage-cocktail into a robust, characterised phage-cocktail, rigorously tested against a wide range of circulating clinical Klebsiella. This work will build on my compassionate phagetherapy collaboration with Prof Mikael Skurnik, University of Helsinki. During our collaboration it has become clear that obtaining phages, screening phages against patient's Klebsiella strains, characterising phages, sequencing, checking genomes (for integrases, AMR and toxins) before designing a cocktail of 2-3 phages delays the application of phage-therapy to patients. I will collaborate with Fixed-phage to develop and test a cost-effective solution to fix my phage-cocktail to medical devices and transmission hot-spots. Together we will determine if the method can add value or will cause further hurdles and complications in preventing Klebsiella transmission. Initial testing will fix my phage-cocktail being fixed to the catheters, prior to optimisation. This will establish all components of the phage-cocktail remain viable for long enough to be effective after fixing. The pre-tested cocktail will be made available for compassionate phage-therapy to reduce the lead time between identifying a suitable patient and providing the patient with an effective treatment. More traditional academic outputs including publication of the Klebsiella strain diversity and efficacy of my initial phage-cocktail in catheters in high-impact open access journals e.g. Scientific reports, Antimicrobial Agents and Chemotherapy. These findings will also be presented at an international conference, e.g. Phage Futures Europe 2020. The findings of this work will contribute to future grant applications to commercialise the optimised phage-cocktail for use of an infection-control agent, such as CARB-X. University of Warwick: My expertise on phage therapy and potential against antimicrobial resistant bacteria. I am currently sequencing the bacterial strains they sent me and will provide them information on the genomes of the clinical bacterial isolates. Fixed phage limited: Fixed-Phage are providing staff time and resources for the preparation and testing of solid materials, including catheters with phages immobilised onto the surface. King's College Hospital: They have provided 20 strains each of E. coli and Klebsiella isolated from patients at King's College Hospital. Manchester Royal Infirmary: They have provided 75 strains of Klebsiella isolated from patients in Manchester.
Impact I have published the work showing that my phage isolates can prevent Klebsiella biofilms in catheters with a simple phage cocktail (crediting NBIC FMTA): E. Townsend, J. Moat, E. Jameson (2020) CAUTI's Next Top Model - model dependent Klebsiella biofilm inhibition by bacteriophages and antimicrobials. Biofilm doi: 10.1016/j.bioflm.2020.100038 The funding has enabled me to make connections with Wythenshawe and King's College Hospital which have been helpful to understand what Klebsiella strains are currently circulating and obtain expert advice on what is possible in hospitals. The working relationship with Fixed-phage Ltd has been fruitful and we have identified some potential stumbling blocks. The preliminary data will be vital in applying for the next stage of funding to use phages on medical devices. Funding will be sort to protect the IP for the phage cocktail and phage coated catheter. The cocktail will be patentable as the optimised phage cocktail will not be published at the time (previous published work has included some inefficient phage cocktails, therefore I have not compromised the IP).
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_41 Developing a clinically relevant phage cocktail against Klebsiella to prevent biofilm formation (Eleanor Jameson) 
Organisation University of Warwick
Country United Kingdom 
Sector Academic/University 
PI Contribution Klebsiella are WHO Priority Pathogens, with a high incidence of antimicrobial resistance (AMR) genes, which can be transmitted to other bacteria. I have supplied phages for use in compassionate phagetherapy, and developed a phage-cocktail that prevents Klebsiella biofilm formation in a catheter model. My Innovation Fellowship aims: 1) I will work with clinical scientists to fully characterise my phage cocktail. The biggest obstacle in compassionate use of phage to treat infection is time: testing the efficacy of large numbers of phages, followed by characterisation, takes 4-6 months so it is not a viable treatment option in most cases. By developing a characterised phage-cocktail, pre-tested on clinical Klebsiella isolates, I will provide a broadspectrum, safe, resource that will speed up the time it takes patients to get effective treatment. 2) Working with Fixed-phage Ltd (specialising in human health) I will develop a method to stably bind the phage cocktail to medical devices (e.g. catheters) and use in transmission hot-spots (hospital sinks), stabalising the phages to prevent life-threatening Klebsiella infections. 3) I will develop knowledge of clinical issues and hurdles to translate my current Klebsiella phage cocktail research, and future phage research, to a medical setting. Current hurdles to phage-therapy include: reproducible Good Manufacturing Practice (GMP) standard phage is difficult (available through JAFRAL, Slovenia); few clinical trials have been undertaken (<20); and ~80% of phage genes are unknown, making it challenging to exclude AMR, toxicity or integrase genes (no side-effects observed in compassionate phage-therapy involving my pre-screened phages). Therefore, I will focus on infection prevention and compassionate phage-therapy to circumvent the issues associated with using phages as a drug. This work fits the "leading edge healthcare" challenge, by allowing me to develop a broad-spectrum, safe, effective resource to prevent Klebsiella biofilms on medical devices and transmission hotspots, and for future compassionate phage-therapy.
Collaborator Contribution The expected outcomes of this mobility fellowship will take my current Klebsiella phage research into a clinical setting and increase my understanding of the hurdles involved. I will obtain currently circulating clinical Klebsiella isolates through collaborators Tim Felton and Stephanie Thomas, Wythenshawe Hospital and Surabhi Taori, Kings College Hospital. I will sequence these Klebsiella to analyse the diversity of the strains and understand their relatedness and origins. These isolates will allow me to determine the range and effectiveness of my phage-cocktail on circulating Klebsiella strains. By collaborating directly with clinicians and clinical scientists, I will gain a greater understanding of the challenges within hospitals involved in identifying Klebsiella. Such as the high frequency of coliform infections and time/budgeting constraints that limit pathogen identification, AMR carriage and outbreak strains, in addition to the constraints/restrictions related to AMR Klebsiella control measures. I will further develop my phage-cocktail into a robust, characterised phage-cocktail, rigorously tested against a wide range of circulating clinical Klebsiella. This work will build on my compassionate phagetherapy collaboration with Prof Mikael Skurnik, University of Helsinki. During our collaboration it has become clear that obtaining phages, screening phages against patient's Klebsiella strains, characterising phages, sequencing, checking genomes (for integrases, AMR and toxins) before designing a cocktail of 2-3 phages delays the application of phage-therapy to patients. I will collaborate with Fixed-phage to develop and test a cost-effective solution to fix my phage-cocktail to medical devices and transmission hot-spots. Together we will determine if the method can add value or will cause further hurdles and complications in preventing Klebsiella transmission. Initial testing will fix my phage-cocktail being fixed to the catheters, prior to optimisation. This will establish all components of the phage-cocktail remain viable for long enough to be effective after fixing. The pre-tested cocktail will be made available for compassionate phage-therapy to reduce the lead time between identifying a suitable patient and providing the patient with an effective treatment. More traditional academic outputs including publication of the Klebsiella strain diversity and efficacy of my initial phage-cocktail in catheters in high-impact open access journals e.g. Scientific reports, Antimicrobial Agents and Chemotherapy. These findings will also be presented at an international conference, e.g. Phage Futures Europe 2020. The findings of this work will contribute to future grant applications to commercialise the optimised phage-cocktail for use of an infection-control agent, such as CARB-X. University of Warwick: My expertise on phage therapy and potential against antimicrobial resistant bacteria. I am currently sequencing the bacterial strains they sent me and will provide them information on the genomes of the clinical bacterial isolates. Fixed phage limited: Fixed-Phage are providing staff time and resources for the preparation and testing of solid materials, including catheters with phages immobilised onto the surface. King's College Hospital: They have provided 20 strains each of E. coli and Klebsiella isolated from patients at King's College Hospital. Manchester Royal Infirmary: They have provided 75 strains of Klebsiella isolated from patients in Manchester.
Impact I have published the work showing that my phage isolates can prevent Klebsiella biofilms in catheters with a simple phage cocktail (crediting NBIC FMTA): E. Townsend, J. Moat, E. Jameson (2020) CAUTI's Next Top Model - model dependent Klebsiella biofilm inhibition by bacteriophages and antimicrobials. Biofilm doi: 10.1016/j.bioflm.2020.100038 The funding has enabled me to make connections with Wythenshawe and King's College Hospital which have been helpful to understand what Klebsiella strains are currently circulating and obtain expert advice on what is possible in hospitals. The working relationship with Fixed-phage Ltd has been fruitful and we have identified some potential stumbling blocks. The preliminary data will be vital in applying for the next stage of funding to use phages on medical devices. Funding will be sort to protect the IP for the phage cocktail and phage coated catheter. The cocktail will be patentable as the optimised phage cocktail will not be published at the time (previous published work has included some inefficient phage cocktails, therefore I have not compromised the IP).
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_45 Superior Anti-biofilm Coatings for Urinary Catheters (Paolo Pantalone) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This project aims to provide novel insights regarding the interactions of bacterial urinary tract pathogens with anti-fouling polymers (Nottingham) combined with a novel anti-biofilm technology (lactams - Unilever). This creates a potential opportunity to develop superior catheter materials for preventing catheter associated urinary tract infections (CAUTI's). Various physical techniques will be employed to characterise the surfaces of lactam-treated materials using established techniques (supported by the Materials Innovation Factory). Single-cell tracking via multimode 2D-3D imaging and confocal microscopy will used to investigate bacteria-lactam surface interactions and multi-species biofilm formation in artificial urine. The project will facilitate development of my current knowledge surrounding lactam anti-biofilm by expanding to alternative mixed species biofilms. I will be using my intellectual abilities to translate into a previously unexplored area - combining fouling resistant polymers with the lactam material. This will require creative thought and problem solving on my part to deliver insights and areas for opportunities in an efficient manner. Freedom to manage the project will require working to deadlines within a multidisciplinary team. My professional network will be enhanced leading to future industrial collaborations. Alignment to ISC: Leading Edge Healthcare - Recognising the demands of an aging population and delivering superior technologies and products. Urinary tract catheters are the most commonly used prosthetic medical devices, with 15-25% of patients requiring bladder catheterisation during hospitalization. They are used to manage urine retention or incontinence for short and extended periods. Long-term catheter users with permanent disability will need a catheter change after 2-3 months for the rest of their lives. Catheters promote CAUTIs that, if left untreated, may lead to kidney infection, sepsis and death. Treatment requires antibiotic therapy and catheter removal. CAUTIs cost the NHS £99M pa and require an extra 638,000 extra bed days (House of Commons Select Committee Report).
Collaborator Contribution The primary deliverable would be demonstration of the superior efficacy of a novel catheter material that could be exploited and developed further in the future by both parties through ongoing collaboration. A key practical output from the project would be the application of multimode 2D-3D imaging to complex microbial systems. The work may also result in the generation of joint intellectual property and a publication output. Unilever will gain access to skills they require to develop their technology in an area outside of their current fields of use, for which they have recently created a spin-out company (Penrhos Bio Ltd). Output from this project will be fed back into Penrhos which could lead to advances in their business. This is an opportunity to deepen the ties they already have with University of Nottingham. Work from this project will further their aim to move towards a more environmentally friendly manufacturer of medical devices and other products. With funding for this placement, they gain the benefits of a skilled worker on their project who has the opportunity to dedicate the time and skills learned to a focused area of research. This project would also showcase Unilever's ability to work with NBIC with a wider scope. The University of Nottingham will deepen its ties with Unilever via a reciprocal relationship. This project could also lead to future student placements at Unilever. This is then further publicity that the University and NBIC are collectively providing further opportunities for students to realise their career ambitions. This project would also showcase Nottingham's active engagement in the government's Industrial Strategy as highlighted in the Universities' UK green paper of January 2017, and University Strategic Plan 2013-2018. NBIC Case Study: In early 2020 Dr Paolo Pantalone was an NBIC Associate Doctoral Researcher at the University of Nottingham and had been working in association with Unilever on elucidating the mechanism of action of novel agents (Unilever's Lactam Technology) for Pseudomonas aeruginosa biofilm prevention. The opportunity arose via the NBIC FTMA scheme to exploit potential novel applications of the Lactam compounds beyond the Unilever core sectors. Paolo worked on their use in combination with unique coatings for the prevention of catheter associated urinary tract infections developed at Nottingham. Also called CAUTI's, these cost the NHS £99m per year. According to a House of Commons Select Committee Report, these require an extra 638,000 extra bed days. Various physical techniques were employed at both Nottingham and in Unilever's Materials Innovation Factory based at Liverpool University. These aimed to characterise the anti-fouling properties of lactam-treated materials using established techniques such as Liquid Chromatography-Mass Spectrometry and confocal microscopy on a state-of-the-art biofilm model. Paolo said, "The project facilitated development of my current knowledge surrounding the lactam anti-biofilm technology and helped me to translate these agents into a previously unexplored area - applying the lactam material to commercial catheters. This required creative thought and problem solving to deliver insights and areas for opportunities in an efficient manner". Paolo's work also allowed his professional network to be enhanced and to work more closely with Unilever development teams and in their facilities. The project allowed Unilever to gain access to skills they required to develop their technology in an area outside of their current fields of use. Unilever recently created a spin-out company (Penrhos Bio Ltd) as a joint venture with the life sciences investment group Innova Partnerships to market the technology outside its normal market sectors. Paolo has now been successful in securing a job with Unilever, demonstrating not just his ability, but also the opportunities offered by collaborative programmes such as the FTMA for researchers to work alongside industry. Lactams, rather than killing bacteria, prevent micro-organisms from forming biofilms on surfaces by disrupting their communications systems. Through Proof of Concept funding, NBIC has funded other projects to allow Penrhos Bio Ltd to explore and prove, or disprove, other Lactam applications, for example marine antifouling with the Plymouth Marine Laboratory.
Impact The catheters treated with Unilever's compounds showed excellent catheter release and biofilm prevention properties on both CAUTI species tested during the project. The data generated by this study will unlock new applications for Unilever's lactam technology in the biomedical and industrial sectors. I will benefit by authorship of any future publications. In addition, Unilever have offered me a permanent position as a research scientist and so I will be able to continue the lactam work.
Start Year 2021
 
Description NBIC FTMA Fellowship F_19_2_45 Superior Anti-biofilm Coatings for Urinary Catheters (Paolo Pantalone) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution This project aims to provide novel insights regarding the interactions of bacterial urinary tract pathogens with anti-fouling polymers (Nottingham) combined with a novel anti-biofilm technology (lactams - Unilever). This creates a potential opportunity to develop superior catheter materials for preventing catheter associated urinary tract infections (CAUTI's). Various physical techniques will be employed to characterise the surfaces of lactam-treated materials using established techniques (supported by the Materials Innovation Factory). Single-cell tracking via multimode 2D-3D imaging and confocal microscopy will used to investigate bacteria-lactam surface interactions and multi-species biofilm formation in artificial urine. The project will facilitate development of my current knowledge surrounding lactam anti-biofilm by expanding to alternative mixed species biofilms. I will be using my intellectual abilities to translate into a previously unexplored area - combining fouling resistant polymers with the lactam material. This will require creative thought and problem solving on my part to deliver insights and areas for opportunities in an efficient manner. Freedom to manage the project will require working to deadlines within a multidisciplinary team. My professional network will be enhanced leading to future industrial collaborations. Alignment to ISC: Leading Edge Healthcare - Recognising the demands of an aging population and delivering superior technologies and products. Urinary tract catheters are the most commonly used prosthetic medical devices, with 15-25% of patients requiring bladder catheterisation during hospitalization. They are used to manage urine retention or incontinence for short and extended periods. Long-term catheter users with permanent disability will need a catheter change after 2-3 months for the rest of their lives. Catheters promote CAUTIs that, if left untreated, may lead to kidney infection, sepsis and death. Treatment requires antibiotic therapy and catheter removal. CAUTIs cost the NHS £99M pa and require an extra 638,000 extra bed days (House of Commons Select Committee Report).
Collaborator Contribution The primary deliverable would be demonstration of the superior efficacy of a novel catheter material that could be exploited and developed further in the future by both parties through ongoing collaboration. A key practical output from the project would be the application of multimode 2D-3D imaging to complex microbial systems. The work may also result in the generation of joint intellectual property and a publication output. Unilever will gain access to skills they require to develop their technology in an area outside of their current fields of use, for which they have recently created a spin-out company (Penrhos Bio Ltd). Output from this project will be fed back into Penrhos which could lead to advances in their business. This is an opportunity to deepen the ties they already have with University of Nottingham. Work from this project will further their aim to move towards a more environmentally friendly manufacturer of medical devices and other products. With funding for this placement, they gain the benefits of a skilled worker on their project who has the opportunity to dedicate the time and skills learned to a focused area of research. This project would also showcase Unilever's ability to work with NBIC with a wider scope. The University of Nottingham will deepen its ties with Unilever via a reciprocal relationship. This project could also lead to future student placements at Unilever. This is then further publicity that the University and NBIC are collectively providing further opportunities for students to realise their career ambitions. This project would also showcase Nottingham's active engagement in the government's Industrial Strategy as highlighted in the Universities' UK green paper of January 2017, and University Strategic Plan 2013-2018. NBIC Case Study: In early 2020 Dr Paolo Pantalone was an NBIC Associate Doctoral Researcher at the University of Nottingham and had been working in association with Unilever on elucidating the mechanism of action of novel agents (Unilever's Lactam Technology) for Pseudomonas aeruginosa biofilm prevention. The opportunity arose via the NBIC FTMA scheme to exploit potential novel applications of the Lactam compounds beyond the Unilever core sectors. Paolo worked on their use in combination with unique coatings for the prevention of catheter associated urinary tract infections developed at Nottingham. Also called CAUTI's, these cost the NHS £99m per year. According to a House of Commons Select Committee Report, these require an extra 638,000 extra bed days. Various physical techniques were employed at both Nottingham and in Unilever's Materials Innovation Factory based at Liverpool University. These aimed to characterise the anti-fouling properties of lactam-treated materials using established techniques such as Liquid Chromatography-Mass Spectrometry and confocal microscopy on a state-of-the-art biofilm model. Paolo said, "The project facilitated development of my current knowledge surrounding the lactam anti-biofilm technology and helped me to translate these agents into a previously unexplored area - applying the lactam material to commercial catheters. This required creative thought and problem solving to deliver insights and areas for opportunities in an efficient manner". Paolo's work also allowed his professional network to be enhanced and to work more closely with Unilever development teams and in their facilities. The project allowed Unilever to gain access to skills they required to develop their technology in an area outside of their current fields of use. Unilever recently created a spin-out company (Penrhos Bio Ltd) as a joint venture with the life sciences investment group Innova Partnerships to market the technology outside its normal market sectors. Paolo has now been successful in securing a job with Unilever, demonstrating not just his ability, but also the opportunities offered by collaborative programmes such as the FTMA for researchers to work alongside industry. Lactams, rather than killing bacteria, prevent micro-organisms from forming biofilms on surfaces by disrupting their communications systems. Through Proof of Concept funding, NBIC has funded other projects to allow Penrhos Bio Ltd to explore and prove, or disprove, other Lactam applications, for example marine antifouling with the Plymouth Marine Laboratory.
Impact The catheters treated with Unilever's compounds showed excellent catheter release and biofilm prevention properties on both CAUTI species tested during the project. The data generated by this study will unlock new applications for Unilever's lactam technology in the biomedical and industrial sectors. I will benefit by authorship of any future publications. In addition, Unilever have offered me a permanent position as a research scientist and so I will be able to continue the lactam work.
Start Year 2021
 
Description NBIC FTMA Fellowship F_19_2_45 Superior Anti-biofilm Coatings for Urinary Catheters (Paolo Pantalone) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution This project aims to provide novel insights regarding the interactions of bacterial urinary tract pathogens with anti-fouling polymers (Nottingham) combined with a novel anti-biofilm technology (lactams - Unilever). This creates a potential opportunity to develop superior catheter materials for preventing catheter associated urinary tract infections (CAUTI's). Various physical techniques will be employed to characterise the surfaces of lactam-treated materials using established techniques (supported by the Materials Innovation Factory). Single-cell tracking via multimode 2D-3D imaging and confocal microscopy will used to investigate bacteria-lactam surface interactions and multi-species biofilm formation in artificial urine. The project will facilitate development of my current knowledge surrounding lactam anti-biofilm by expanding to alternative mixed species biofilms. I will be using my intellectual abilities to translate into a previously unexplored area - combining fouling resistant polymers with the lactam material. This will require creative thought and problem solving on my part to deliver insights and areas for opportunities in an efficient manner. Freedom to manage the project will require working to deadlines within a multidisciplinary team. My professional network will be enhanced leading to future industrial collaborations. Alignment to ISC: Leading Edge Healthcare - Recognising the demands of an aging population and delivering superior technologies and products. Urinary tract catheters are the most commonly used prosthetic medical devices, with 15-25% of patients requiring bladder catheterisation during hospitalization. They are used to manage urine retention or incontinence for short and extended periods. Long-term catheter users with permanent disability will need a catheter change after 2-3 months for the rest of their lives. Catheters promote CAUTIs that, if left untreated, may lead to kidney infection, sepsis and death. Treatment requires antibiotic therapy and catheter removal. CAUTIs cost the NHS £99M pa and require an extra 638,000 extra bed days (House of Commons Select Committee Report).
Collaborator Contribution The primary deliverable would be demonstration of the superior efficacy of a novel catheter material that could be exploited and developed further in the future by both parties through ongoing collaboration. A key practical output from the project would be the application of multimode 2D-3D imaging to complex microbial systems. The work may also result in the generation of joint intellectual property and a publication output. Unilever will gain access to skills they require to develop their technology in an area outside of their current fields of use, for which they have recently created a spin-out company (Penrhos Bio Ltd). Output from this project will be fed back into Penrhos which could lead to advances in their business. This is an opportunity to deepen the ties they already have with University of Nottingham. Work from this project will further their aim to move towards a more environmentally friendly manufacturer of medical devices and other products. With funding for this placement, they gain the benefits of a skilled worker on their project who has the opportunity to dedicate the time and skills learned to a focused area of research. This project would also showcase Unilever's ability to work with NBIC with a wider scope. The University of Nottingham will deepen its ties with Unilever via a reciprocal relationship. This project could also lead to future student placements at Unilever. This is then further publicity that the University and NBIC are collectively providing further opportunities for students to realise their career ambitions. This project would also showcase Nottingham's active engagement in the government's Industrial Strategy as highlighted in the Universities' UK green paper of January 2017, and University Strategic Plan 2013-2018. NBIC Case Study: In early 2020 Dr Paolo Pantalone was an NBIC Associate Doctoral Researcher at the University of Nottingham and had been working in association with Unilever on elucidating the mechanism of action of novel agents (Unilever's Lactam Technology) for Pseudomonas aeruginosa biofilm prevention. The opportunity arose via the NBIC FTMA scheme to exploit potential novel applications of the Lactam compounds beyond the Unilever core sectors. Paolo worked on their use in combination with unique coatings for the prevention of catheter associated urinary tract infections developed at Nottingham. Also called CAUTI's, these cost the NHS £99m per year. According to a House of Commons Select Committee Report, these require an extra 638,000 extra bed days. Various physical techniques were employed at both Nottingham and in Unilever's Materials Innovation Factory based at Liverpool University. These aimed to characterise the anti-fouling properties of lactam-treated materials using established techniques such as Liquid Chromatography-Mass Spectrometry and confocal microscopy on a state-of-the-art biofilm model. Paolo said, "The project facilitated development of my current knowledge surrounding the lactam anti-biofilm technology and helped me to translate these agents into a previously unexplored area - applying the lactam material to commercial catheters. This required creative thought and problem solving to deliver insights and areas for opportunities in an efficient manner". Paolo's work also allowed his professional network to be enhanced and to work more closely with Unilever development teams and in their facilities. The project allowed Unilever to gain access to skills they required to develop their technology in an area outside of their current fields of use. Unilever recently created a spin-out company (Penrhos Bio Ltd) as a joint venture with the life sciences investment group Innova Partnerships to market the technology outside its normal market sectors. Paolo has now been successful in securing a job with Unilever, demonstrating not just his ability, but also the opportunities offered by collaborative programmes such as the FTMA for researchers to work alongside industry. Lactams, rather than killing bacteria, prevent micro-organisms from forming biofilms on surfaces by disrupting their communications systems. Through Proof of Concept funding, NBIC has funded other projects to allow Penrhos Bio Ltd to explore and prove, or disprove, other Lactam applications, for example marine antifouling with the Plymouth Marine Laboratory.
Impact The catheters treated with Unilever's compounds showed excellent catheter release and biofilm prevention properties on both CAUTI species tested during the project. The data generated by this study will unlock new applications for Unilever's lactam technology in the biomedical and industrial sectors. I will benefit by authorship of any future publications. In addition, Unilever have offered me a permanent position as a research scientist and so I will be able to continue the lactam work.
Start Year 2021
 
Description NBIC FTMA Fellowship F_19_2_49 Stimulating Host-Pathogen Interactions in Wound Biofilms using Poloxamer Surfactants (Mohamed El Mohtadi) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution The Innovation Fellowship will enable me to take a three month secondment with 5D Health Protection Group (5D HPG) Limited at the Centre of Excellence in Biofilm Science and Technologies in Liverpool. The secondment will pump-prime a new biofilm collaboration between academia and 5D HPG. Chronic wounds are common in the elderly and lead to substantial morbidity and mortality. Biofilm formation is a major problem in chronic wounds, resulting in chronic inflammation and delayed wound closure. The recalcitrance of biofilms to the host immune system and antimicrobial agents, together with the emergence of antimicrobial drug resistant bacteria, typically leads to poor resolution and increased risk of infection. The aim of this project is to combine the use of poloxamer surfactants with targeted stimulation of innate immune responses as a novel strategy to resolve wound biofilms and promote healing. This novel therapeutic approach to prevent/treat wound infections in the elderly whilst reducing the reliance on antibiotics aligns to two key challenges outlined in the Industry Strategic Challenge Fund, Healthy Ageing and Leading-Edge Healthcare. My hypothesis is that the prevention of biofilms and/or the dispersal of existing biofilms using poloxamer surfactants will provide an environment that promotes bacterial clearance through enhanced host inflammatory cell migration and interaction with bacteria. The poloxamer surfactants will be investigated alone and in combination with immunomodulatory agents investigated during my PhD (awarded 2019) that dampen inflammation but promote phagocytosis and healing. As a non-British, early career postdoctoral research scientist with expertise in host-pathogen interactions, this opportunity to work in biofilm research and gain experience of an industrial research environment will grow my skills in the field. Successful completion of the fellowship will enhance my research profile and attractiveness to UK employers/funders, thereby supporting my career plans to remain in the UK and eventually become an independent researcher.
Collaborator Contribution This secondment will extend my expertise of host-pathogen interactions into the field of biofilm management and control. It will give me an insight in industry developments and technologies, and provide me with industry perspective that will enhance my career aspirations and prospects. The Innovation Fellowship will pump-prime an exciting new biofilm collaboration between Manchester Metropolitan University and the 5D HPG industry partner. The project will generate sufficient data to substantially contribute to one subsequent joint research publication (submission to Biofilms and Microbiomes proposed) and kick-start larger funding bids (BBSRC Industrial Partnership Award/Responsive Mode Research Grant under consideration) to sustain an ongoing income stream and build the research capacity as the collaboration develops beyond this current application. This initial collaborative project will focus predominantly on stimulation of macrophage-mediated host inflammatory cell activity but future work will explore a wider range of host-pathogen interactions and wound healing processes. The 5D HPG industry partner already has patent-protected antibiofilm technologies in relation to its surfactant agents and this collaboration with academia is intended to lead to a long-lasting partnership where further, potential game-changing therapeutic interventions with commercial exploitability become realised. The use of poloxamer surfactants alongside stimulation of host immunity represents an emergent strategy to combat biofilms in impaired wound healing states, leading to far-reaching societal, economic and healthcare impact. The NHS spends over £5 billion per year treating chronic wounds and associated comorbidities. However, wound treatments often fail and have been largely limited to debridement of non-viable (necrotic) tissues, application of routine wound dressings and use of antibiotics to clear wound infections. Biofilm formation can impede antibiotic delivery and impair bacterial clearance by host immunity. Moreover, antibiotic resistance is commonplace so there is an urgent need to develop new therapeutic strategies to resolve infections with reduced reliance on antibiotics. This project will foster a close partnership to develop and optimise novel, commercially viable therapies in the future that simultaneously prevent/control biofilm formation and promote host-mediated clearance of bacteria, with impacts that include • Reduced antibiotic use [thereby helping to tackle antibiotic resistance and emergence of new resistant strains]. • Prophylactic use to prevent wound infections in patients with ulcer development. • Enhanced healing and reduced wound infection rates in the elderly. • Reduced healthcare costs and treatment times. • Improved health, longevity and wellbeing in the elderly. • Reduced morbidity (e.g. impaired mobility, pain and anxiety/depression) and issues of social isolation/exclusion associated with chronic wounds.
Impact This short (3-month) fellowship project has generated a substantial amount of high quality, novel data that can be used to write a research manuscript for publication and form the basis for further funding opportunities and a growing collaboration between researchers at Manchester Metropolitan University and 5D Health Protection Group (5D HPG) Limited. The award enabled the named fellow (Mohamed El Mohtadi) to work in close partnership with 5D HPG Limited, gaining invaluable expertise in biofilm investigations at their laboratories, experience of working within an external company setting and fostering a strong collaborative link between academia and industry. This opportunity has also contributed to the fellow subsequently securing a permanent academic post in the UK with the ability to set up a new research group in this particular field. The findings of this study confirmed that dual sequential use of poloxamers followed by estradiol therapy substantially enhances both the disruption of Gram-positive or Gram-negative bacterial biofilms in vitro and their subsequent targeted clearance by host inflammatory cells when compared to either poloxamer or estradiol application alone. Moreover, this combined therapeutic strategy not only promoted biofilm disruption and host-mediated clearance without the need for antibiotics but also stimulated rapid wound repair, thereby providing multiple beneficial advantages that could be exploited in clinical settings such as infected chronic wounds in the elderly. These initial findings using in vitro biofilm and wound models are extremely promising but future work needs to determine whether the results can be extrapolated into in vivo wound settings. Successful future development of topical wound therapies using this focussed strategy and reduced reliance on antibiotics could revolutionise wound healing and anti-biofilm technologies, leading to substantial clinical and economic impact for the management and treatment of chronic wounds in the elderly. The potential development of game-changing therapies arising from this project may lead to far-reaching societal, economic and healthcare impact.
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_49 Stimulating Host-Pathogen Interactions in Wound Biofilms using Poloxamer Surfactants (Mohamed El Mohtadi) 
Organisation Manchester Metropolitan University
Country United Kingdom 
Sector Academic/University 
PI Contribution The Innovation Fellowship will enable me to take a three month secondment with 5D Health Protection Group (5D HPG) Limited at the Centre of Excellence in Biofilm Science and Technologies in Liverpool. The secondment will pump-prime a new biofilm collaboration between academia and 5D HPG. Chronic wounds are common in the elderly and lead to substantial morbidity and mortality. Biofilm formation is a major problem in chronic wounds, resulting in chronic inflammation and delayed wound closure. The recalcitrance of biofilms to the host immune system and antimicrobial agents, together with the emergence of antimicrobial drug resistant bacteria, typically leads to poor resolution and increased risk of infection. The aim of this project is to combine the use of poloxamer surfactants with targeted stimulation of innate immune responses as a novel strategy to resolve wound biofilms and promote healing. This novel therapeutic approach to prevent/treat wound infections in the elderly whilst reducing the reliance on antibiotics aligns to two key challenges outlined in the Industry Strategic Challenge Fund, Healthy Ageing and Leading-Edge Healthcare. My hypothesis is that the prevention of biofilms and/or the dispersal of existing biofilms using poloxamer surfactants will provide an environment that promotes bacterial clearance through enhanced host inflammatory cell migration and interaction with bacteria. The poloxamer surfactants will be investigated alone and in combination with immunomodulatory agents investigated during my PhD (awarded 2019) that dampen inflammation but promote phagocytosis and healing. As a non-British, early career postdoctoral research scientist with expertise in host-pathogen interactions, this opportunity to work in biofilm research and gain experience of an industrial research environment will grow my skills in the field. Successful completion of the fellowship will enhance my research profile and attractiveness to UK employers/funders, thereby supporting my career plans to remain in the UK and eventually become an independent researcher.
Collaborator Contribution This secondment will extend my expertise of host-pathogen interactions into the field of biofilm management and control. It will give me an insight in industry developments and technologies, and provide me with industry perspective that will enhance my career aspirations and prospects. The Innovation Fellowship will pump-prime an exciting new biofilm collaboration between Manchester Metropolitan University and the 5D HPG industry partner. The project will generate sufficient data to substantially contribute to one subsequent joint research publication (submission to Biofilms and Microbiomes proposed) and kick-start larger funding bids (BBSRC Industrial Partnership Award/Responsive Mode Research Grant under consideration) to sustain an ongoing income stream and build the research capacity as the collaboration develops beyond this current application. This initial collaborative project will focus predominantly on stimulation of macrophage-mediated host inflammatory cell activity but future work will explore a wider range of host-pathogen interactions and wound healing processes. The 5D HPG industry partner already has patent-protected antibiofilm technologies in relation to its surfactant agents and this collaboration with academia is intended to lead to a long-lasting partnership where further, potential game-changing therapeutic interventions with commercial exploitability become realised. The use of poloxamer surfactants alongside stimulation of host immunity represents an emergent strategy to combat biofilms in impaired wound healing states, leading to far-reaching societal, economic and healthcare impact. The NHS spends over £5 billion per year treating chronic wounds and associated comorbidities. However, wound treatments often fail and have been largely limited to debridement of non-viable (necrotic) tissues, application of routine wound dressings and use of antibiotics to clear wound infections. Biofilm formation can impede antibiotic delivery and impair bacterial clearance by host immunity. Moreover, antibiotic resistance is commonplace so there is an urgent need to develop new therapeutic strategies to resolve infections with reduced reliance on antibiotics. This project will foster a close partnership to develop and optimise novel, commercially viable therapies in the future that simultaneously prevent/control biofilm formation and promote host-mediated clearance of bacteria, with impacts that include • Reduced antibiotic use [thereby helping to tackle antibiotic resistance and emergence of new resistant strains]. • Prophylactic use to prevent wound infections in patients with ulcer development. • Enhanced healing and reduced wound infection rates in the elderly. • Reduced healthcare costs and treatment times. • Improved health, longevity and wellbeing in the elderly. • Reduced morbidity (e.g. impaired mobility, pain and anxiety/depression) and issues of social isolation/exclusion associated with chronic wounds.
Impact This short (3-month) fellowship project has generated a substantial amount of high quality, novel data that can be used to write a research manuscript for publication and form the basis for further funding opportunities and a growing collaboration between researchers at Manchester Metropolitan University and 5D Health Protection Group (5D HPG) Limited. The award enabled the named fellow (Mohamed El Mohtadi) to work in close partnership with 5D HPG Limited, gaining invaluable expertise in biofilm investigations at their laboratories, experience of working within an external company setting and fostering a strong collaborative link between academia and industry. This opportunity has also contributed to the fellow subsequently securing a permanent academic post in the UK with the ability to set up a new research group in this particular field. The findings of this study confirmed that dual sequential use of poloxamers followed by estradiol therapy substantially enhances both the disruption of Gram-positive or Gram-negative bacterial biofilms in vitro and their subsequent targeted clearance by host inflammatory cells when compared to either poloxamer or estradiol application alone. Moreover, this combined therapeutic strategy not only promoted biofilm disruption and host-mediated clearance without the need for antibiotics but also stimulated rapid wound repair, thereby providing multiple beneficial advantages that could be exploited in clinical settings such as infected chronic wounds in the elderly. These initial findings using in vitro biofilm and wound models are extremely promising but future work needs to determine whether the results can be extrapolated into in vivo wound settings. Successful future development of topical wound therapies using this focussed strategy and reduced reliance on antibiotics could revolutionise wound healing and anti-biofilm technologies, leading to substantial clinical and economic impact for the management and treatment of chronic wounds in the elderly. The potential development of game-changing therapies arising from this project may lead to far-reaching societal, economic and healthcare impact.
Start Year 2020
 
Description NBIC FTMA Fellowship F_19_2_49 Stimulating Host-Pathogen Interactions in Wound Biofilms using Poloxamer Surfactants (Mohamed El Mohtadi) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The Innovation Fellowship will enable me to take a three month secondment with 5D Health Protection Group (5D HPG) Limited at the Centre of Excellence in Biofilm Science and Technologies in Liverpool. The secondment will pump-prime a new biofilm collaboration between academia and 5D HPG. Chronic wounds are common in the elderly and lead to substantial morbidity and mortality. Biofilm formation is a major problem in chronic wounds, resulting in chronic inflammation and delayed wound closure. The recalcitrance of biofilms to the host immune system and antimicrobial agents, together with the emergence of antimicrobial drug resistant bacteria, typically leads to poor resolution and increased risk of infection. The aim of this project is to combine the use of poloxamer surfactants with targeted stimulation of innate immune responses as a novel strategy to resolve wound biofilms and promote healing. This novel therapeutic approach to prevent/treat wound infections in the elderly whilst reducing the reliance on antibiotics aligns to two key challenges outlined in the Industry Strategic Challenge Fund, Healthy Ageing and Leading-Edge Healthcare. My hypothesis is that the prevention of biofilms and/or the dispersal of existing biofilms using poloxamer surfactants will provide an environment that promotes bacterial clearance through enhanced host inflammatory cell migration and interaction with bacteria. The poloxamer surfactants will be investigated alone and in combination with immunomodulatory agents investigated during my PhD (awarded 2019) that dampen inflammation but promote phagocytosis and healing. As a non-British, early career postdoctoral research scientist with expertise in host-pathogen interactions, this opportunity to work in biofilm research and gain experience of an industrial research environment will grow my skills in the field. Successful completion of the fellowship will enhance my research profile and attractiveness to UK employers/funders, thereby supporting my career plans to remain in the UK and eventually become an independent researcher.
Collaborator Contribution This secondment will extend my expertise of host-pathogen interactions into the field of biofilm management and control. It will give me an insight in industry developments and technologies, and provide me with industry perspective that will enhance my career aspirations and prospects. The Innovation Fellowship will pump-prime an exciting new biofilm collaboration between Manchester Metropolitan University and the 5D HPG industry partner. The project will generate sufficient data to substantially contribute to one subsequent joint research publication (submission to Biofilms and Microbiomes proposed) and kick-start larger funding bids (BBSRC Industrial Partnership Award/Responsive Mode Research Grant under consideration) to sustain an ongoing income stream and build the research capacity as the collaboration develops beyond this current application. This initial collaborative project will focus predominantly on stimulation of macrophage-mediated host inflammatory cell activity but future work will explore a wider range of host-pathogen interactions and wound healing processes. The 5D HPG industry partner already has patent-protected antibiofilm technologies in relation to its surfactant agents and this collaboration with academia is intended to lead to a long-lasting partnership where further, potential game-changing therapeutic interventions with commercial exploitability become realised. The use of poloxamer surfactants alongside stimulation of host immunity represents an emergent strategy to combat biofilms in impaired wound healing states, leading to far-reaching societal, economic and healthcare impact. The NHS spends over £5 billion per year treating chronic wounds and associated comorbidities. However, wound treatments often fail and have been largely limited to debridement of non-viable (necrotic) tissues, application of routine wound dressings and use of antibiotics to clear wound infections. Biofilm formation can impede antibiotic delivery and impair bacterial clearance by host immunity. Moreover, antibiotic resistance is commonplace so there is an urgent need to develop new therapeutic strategies to resolve infections with reduced reliance on antibiotics. This project will foster a close partnership to develop and optimise novel, commercially viable therapies in the future that simultaneously prevent/control biofilm formation and promote host-mediated clearance of bacteria, with impacts that include • Reduced antibiotic use [thereby helping to tackle antibiotic resistance and emergence of new resistant strains]. • Prophylactic use to prevent wound infections in patients with ulcer development. • Enhanced healing and reduced wound infection rates in the elderly. • Reduced healthcare costs and treatment times. • Improved health, longevity and wellbeing in the elderly. • Reduced morbidity (e.g. impaired mobility, pain and anxiety/depression) and issues of social isolation/exclusion associated with chronic wounds.
Impact This short (3-month) fellowship project has generated a substantial amount of high quality, novel data that can be used to write a research manuscript for publication and form the basis for further funding opportunities and a growing collaboration between researchers at Manchester Metropolitan University and 5D Health Protection Group (5D HPG) Limited. The award enabled the named fellow (Mohamed El Mohtadi) to work in close partnership with 5D HPG Limited, gaining invaluable expertise in biofilm investigations at their laboratories, experience of working within an external company setting and fostering a strong collaborative link between academia and industry. This opportunity has also contributed to the fellow subsequently securing a permanent academic post in the UK with the ability to set up a new research group in this particular field. The findings of this study confirmed that dual sequential use of poloxamers followed by estradiol therapy substantially enhances both the disruption of Gram-positive or Gram-negative bacterial biofilms in vitro and their subsequent targeted clearance by host inflammatory cells when compared to either poloxamer or estradiol application alone. Moreover, this combined therapeutic strategy not only promoted biofilm disruption and host-mediated clearance without the need for antibiotics but also stimulated rapid wound repair, thereby providing multiple beneficial advantages that could be exploited in clinical settings such as infected chronic wounds in the elderly. These initial findings using in vitro biofilm and wound models are extremely promising but future work needs to determine whether the results can be extrapolated into in vivo wound settings. Successful future development of topical wound therapies using this focussed strategy and reduced reliance on antibiotics could revolutionise wound healing and anti-biofilm technologies, leading to substantial clinical and economic impact for the management and treatment of chronic wounds in the elderly. The potential development of game-changing therapies arising from this project may lead to far-reaching societal, economic and healthcare impact.
Start Year 2020
 
Description NBIC FTMA Placement 20_IP_085 Novel rapid methods for broad detection of microbes and microbial activity (Praveen Kaveri) 
Organisation Cromerix Ltd
Country United Kingdom 
Sector Private 
PI Contribution My PhD research experience at Loughborough University showed that while it is possible to detect bacteria in principle in a single step using an aptamer probe, there are several challenges to address before this can be successfully applied in practice. In this project, I aim to explore some novel approaches that can address the fundamental challenges around rapid aptamer probe-based detection and make the approach reliable and broadly applicable against any microbe (WP1 and WP2). I will also explore a novel approach for the detection of microbial activity (WP3). The experience of working in Cromerix, a start-up, will be the first of its kind for me as I have never worked in a commercial environment. Unique personal development will be achieved through interactions with client organisations, who bring in specific requirements around the detection of microbes, biofilms and microbial activity. Initial interactions with them have helped in shaping up the problem definition and inspired the novel methods of addressing those problems that I will explore through this project. I also look forward to gaining an exposure of the Alderley Park facilities where Cromerix has been offered a hotdesk. Success of this project will establish the proof of concept of novel rapid methods for broad detection of microbes and microbial activity for the first time. These methods have wide applicability in industry, clinic and home. Thus, this project aligns well with three of the four themes of the Industrial Strategy Challenge Fund: Ageing Society (Accelerating detection of disease, Leading-edge healthcare), Future of mobility (Future flight) and Clean Growth (Transforming food production).
Collaborator Contribution The following outcomes are expected as a result of this visit/placement. 1. New Skills and Knowledge - I will develop new knowledge around the feasibility of some novel generic methods for rapid broad detection of microbes and microbial activity using a. single aptamer probe (WP1), b. dual aptamer probe (WP1), c. catalytic transduction (WP2), and d. enzymatic cleavage (WP3). - I will learn how to liaise, communicate, present and submit reports to industrial clients. - As I aim to progress to the next phase of development working on the successful outcomes of this project, I will gain experience of writing collaborative proposals to funders such as Innovate-UK by working together with the clients. - As an early member of the start-up, I will gain exposure to the key small business operations, including purchase ordering, safety, and intellectual property management. 2. Collaborations This project proposal is guided by the "problem definition" discussions (scoping meetings) Cromerix has had with two established global players in the field of air transport (for microbial biofilms detection) and personal care (for microbial activity detection), where I have participated. The work I will carry out in this project will strengthen these collaborations and potentially lead to investments from these organisations for further technology development, an interest for which has been expressed by these organisations. Successful validation of the proposed generic methods will also allow me to approach organisations in other sectors of industry and clinic to develop new collaborations. 3. Impact Successful validation in this project will lead to further technology development to progress along the TRL and produce workable prototypes in collaboration with the industry partners. The methods being explored have broad applications. The chosen applications are based on interests received from industry players in niche sectors and can be extended to broader sectors of industry, clinic and consumer market. Thus, successful validation and TRL progression based on these methods can be potentially deliver a broad socio-economic impact through new product development around the detection of microbes and microbial activity. I look forward to working with the Alderley Park network as part of Cromerix in creating these translational impacts.
Impact Feedback from academic: I have met and exceeded my objectives of the FTMA project through the following outcomes. Skills and Knowledge The FTMA project gave me a unique experience of working in a start-up environment, which I found different from the academic research experience in many ways. The projects here are more industrial problem-driven rather than curiosity-driven as in a university. There is a greater importance on freedom to operate check before working on an idea. I helped the company Director with background IP search for discussion with the IP attorney, which helped ascertain the freedom to operate of the research I conducted in FTMA. My attending of the client meetings with the Director helped me understand how professionally these meetings are conducted, how NDAs are prepared and signed prior to the first meeting, how presentations are done, and how a problem is defined that is of importance to the client and deliverable within the required timeline, costs, and capacities of a start-up company. Working with the Director, I also learnt how to write industry-focused technical consulting and development proposals, two of which were submitted to clients, and one was submitted to Innovate UK. I have also gained some insights into the importance and challenges of contract negotiations before a project can actually start. The company was supported by NBIC's Accelerator funding for participating in the Alderley Park Accelerator. The Director primarily attended this, but I had the opportunity of getting introduced to the concepts of customer discovery, business plan proposition, and Lean innovation as these are now part of the company's knowledge base and have defined how we as a company approach business development. As an early member of the start-up, I have also gained exposure to the purchase and sales processes and setting up safety and risk assessment documents. Research outcomes For bacterial detection, the key outcomes included • Conserved epitopes for bacteria and novel aptamer beacon probes for broad detection of gram-negative bacteria that are applicable in various fields, including but not restricted to bacterial contamination in industry and environment, and clinical diagnostics of bacterial infections. • A novel method to detect viable bacteria using dual aptamer probes that is applicable for viability detection of other microbes, including fungi. • Conserved proteases and peptide probe for detection of bacterial activity. • A novel colorimetric transduction method for reader-less visual detection using peptide and aptamer probes. This method can be extended to detection of targets beyond bacteria. For fungal detection, the key outcomes included • Conserved epitopes and aptamers against these conserved epitopes with information on regions of interactions, which is now being used to design aptamer beacons for broad fungal detection as part of a client-funded project. For malodour detection and inhibition, the key outcomes included • Identifying the mechanism of malodour production by bacteria secreted from the human axillary glands. • Methods of detection of PatB, an enzyme associated with malodour production, detection of PatB activity and detection of malodour molecules produced by the bacteria. • A method and aptamer for inhibition of production of malodour molecules. Collaborations The outcomes of this FTMA project supported the progression of discussions with two clients, one in a niche field of microbial detection and another in personal care/microbiome. This involved submission of proposals to these organisations. The proposal to the first client (microbial detection) has been accepted after several rounds of discussion and has progressed towards contract negotiation phase. The project is scheduled to commence in August 2022 and will employ me. Progression with the proposal submitted to the second client (personal care/microbiome) has been put on hold by them, reportedly due to their organisational changes. Even if the second client is unable to progress, the outcome should help Cromerix to progress a collaboration on this topic with another organisation in the field of personal care/microbiome. In addition to the abovementioned collaboration, the outcomes of the project have also helped the company to engage with a wider network of stakeholders in the field of microbial detection, which is expected to drive more innovation-led projects supporting technology and business development. Impact The work done in the FTMA project is creating impact through multiple channels. The research outcomes have helped establish a client project in a niche field of microbial contamination detection, which is going to commence from August 2022, and has set strong foundations for a project in the field of personal care/microbiome. The outcomes also formed the basis of a recent application to the Fast Start Innovate-UK grant in the field of diabetic foot ulcer prognostic. All these projects have technology and business plan development in scope to support the eventual commercial success of the company. The outcomes are also supporting the growth in network and visibility of the company among the relevant stakeholders. Eventual adoption of the developed microbial detection technologies by the industry or clinic will address multiple themes of the Industrial Strategy Challenge Fund, some of these being Ageing Society (Accelerating detection of disease, Leading-edge healthcare), Future of mobility (Future flight) and Clean Growth (Transforming food production). With an outstanding support from the Director, the project has helped my personal development through the first and rich exposure to working in a business environment. The varied professional skills and knowledge gained around business case preparation, product development, IP, legal, safety and operations will help me contribute much better than before in my role as a "Scientist - Technology Development" in Cromerix. INTELLECTUAL PROPERTY In the near future, I will work closely with the IP attorney on patent filing around the method and materials developed within the FTMA project after doing a patentability assessment and IP strategy development together with the Director. WHAT DID HAPPEN NEXT? OR IS GOING TO HAPPEN NEXT? As mentioned above, the immediate next step is to work on a client project for microbial detection technology development in a niche space. Through this project, I will keep working with the team Cromerix on microbial detection technology development and progression towards commercialisation. Any support through direct funding from NBIC in a future proof of concept (POC) project or cash/in-kind support towards a funding application to another organisation for advancing the TRL of the technology will be vitally important and gratefully received. This FTMA funding was a unique support towards my gaining exposure in a technology start-up environment, which as an innovator I was aiming to get straight after my PhD. In addition to that, I am also getting a position in the company as a full-time employee. The funding also helped the company generate its own IP, which is acting as a foundation to its first projects and proposals. However, further data need to be generated before these IP can be filed as a patent. I hope we can apply for funding support from NBIC for patent filing at the time when it is needed. Also, any support towards my continued professional development (CPD), either through courses within NBIC or funding support to attend these externally will be very helpful and much appreciated. I would like to extend my sincerest thanks to the FTMA funding, which has helped unleash the potential in me and the company to take the first steps towards creating valuable impact to UK's society, economy, and environment.
Start Year 2021
 
Description NBIC FTMA Placement 20_IP_085 Novel rapid methods for broad detection of microbes and microbial activity (Praveen Kaveri) 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution My PhD research experience at Loughborough University showed that while it is possible to detect bacteria in principle in a single step using an aptamer probe, there are several challenges to address before this can be successfully applied in practice. In this project, I aim to explore some novel approaches that can address the fundamental challenges around rapid aptamer probe-based detection and make the approach reliable and broadly applicable against any microbe (WP1 and WP2). I will also explore a novel approach for the detection of microbial activity (WP3). The experience of working in Cromerix, a start-up, will be the first of its kind for me as I have never worked in a commercial environment. Unique personal development will be achieved through interactions with client organisations, who bring in specific requirements around the detection of microbes, biofilms and microbial activity. Initial interactions with them have helped in shaping up the problem definition and inspired the novel methods of addressing those problems that I will explore through this project. I also look forward to gaining an exposure of the Alderley Park facilities where Cromerix has been offered a hotdesk. Success of this project will establish the proof of concept of novel rapid methods for broad detection of microbes and microbial activity for the first time. These methods have wide applicability in industry, clinic and home. Thus, this project aligns well with three of the four themes of the Industrial Strategy Challenge Fund: Ageing Society (Accelerating detection of disease, Leading-edge healthcare), Future of mobility (Future flight) and Clean Growth (Transforming food production).
Collaborator Contribution The following outcomes are expected as a result of this visit/placement. 1. New Skills and Knowledge - I will develop new knowledge around the feasibility of some novel generic methods for rapid broad detection of microbes and microbial activity using a. single aptamer probe (WP1), b. dual aptamer probe (WP1), c. catalytic transduction (WP2), and d. enzymatic cleavage (WP3). - I will learn how to liaise, communicate, present and submit reports to industrial clients. - As I aim to progress to the next phase of development working on the successful outcomes of this project, I will gain experience of writing collaborative proposals to funders such as Innovate-UK by working together with the clients. - As an early member of the start-up, I will gain exposure to the key small business operations, including purchase ordering, safety, and intellectual property management. 2. Collaborations This project proposal is guided by the "problem definition" discussions (scoping meetings) Cromerix has had with two established global players in the field of air transport (for microbial biofilms detection) and personal care (for microbial activity detection), where I have participated. The work I will carry out in this project will strengthen these collaborations and potentially lead to investments from these organisations for further technology development, an interest for which has been expressed by these organisations. Successful validation of the proposed generic methods will also allow me to approach organisations in other sectors of industry and clinic to develop new collaborations. 3. Impact Successful validation in this project will lead to further technology development to progress along the TRL and produce workable prototypes in collaboration with the industry partners. The methods being explored have broad applications. The chosen applications are based on interests received from industry players in niche sectors and can be extended to broader sectors of industry, clinic and consumer market. Thus, successful validation and TRL progression based on these methods can be potentially deliver a broad socio-economic impact through new product development around the detection of microbes and microbial activity. I look forward to working with the Alderley Park network as part of Cromerix in creating these translational impacts.
Impact Feedback from academic: I have met and exceeded my objectives of the FTMA project through the following outcomes. Skills and Knowledge The FTMA project gave me a unique experience of working in a start-up environment, which I found different from the academic research experience in many ways. The projects here are more industrial problem-driven rather than curiosity-driven as in a university. There is a greater importance on freedom to operate check before working on an idea. I helped the company Director with background IP search for discussion with the IP attorney, which helped ascertain the freedom to operate of the research I conducted in FTMA. My attending of the client meetings with the Director helped me understand how professionally these meetings are conducted, how NDAs are prepared and signed prior to the first meeting, how presentations are done, and how a problem is defined that is of importance to the client and deliverable within the required timeline, costs, and capacities of a start-up company. Working with the Director, I also learnt how to write industry-focused technical consulting and development proposals, two of which were submitted to clients, and one was submitted to Innovate UK. I have also gained some insights into the importance and challenges of contract negotiations before a project can actually start. The company was supported by NBIC's Accelerator funding for participating in the Alderley Park Accelerator. The Director primarily attended this, but I had the opportunity of getting introduced to the concepts of customer discovery, business plan proposition, and Lean innovation as these are now part of the company's knowledge base and have defined how we as a company approach business development. As an early member of the start-up, I have also gained exposure to the purchase and sales processes and setting up safety and risk assessment documents. Research outcomes For bacterial detection, the key outcomes included • Conserved epitopes for bacteria and novel aptamer beacon probes for broad detection of gram-negative bacteria that are applicable in various fields, including but not restricted to bacterial contamination in industry and environment, and clinical diagnostics of bacterial infections. • A novel method to detect viable bacteria using dual aptamer probes that is applicable for viability detection of other microbes, including fungi. • Conserved proteases and peptide probe for detection of bacterial activity. • A novel colorimetric transduction method for reader-less visual detection using peptide and aptamer probes. This method can be extended to detection of targets beyond bacteria. For fungal detection, the key outcomes included • Conserved epitopes and aptamers against these conserved epitopes with information on regions of interactions, which is now being used to design aptamer beacons for broad fungal detection as part of a client-funded project. For malodour detection and inhibition, the key outcomes included • Identifying the mechanism of malodour production by bacteria secreted from the human axillary glands. • Methods of detection of PatB, an enzyme associated with malodour production, detection of PatB activity and detection of malodour molecules produced by the bacteria. • A method and aptamer for inhibition of production of malodour molecules. Collaborations The outcomes of this FTMA project supported the progression of discussions with two clients, one in a niche field of microbial detection and another in personal care/microbiome. This involved submission of proposals to these organisations. The proposal to the first client (microbial detection) has been accepted after several rounds of discussion and has progressed towards contract negotiation phase. The project is scheduled to commence in August 2022 and will employ me. Progression with the proposal submitted to the second client (personal care/microbiome) has been put on hold by them, reportedly due to their organisational changes. Even if the second client is unable to progress, the outcome should help Cromerix to progress a collaboration on this topic with another organisation in the field of personal care/microbiome. In addition to the abovementioned collaboration, the outcomes of the project have also helped the company to engage with a wider network of stakeholders in the field of microbial detection, which is expected to drive more innovation-led projects supporting technology and business development. Impact The work done in the FTMA project is creating impact through multiple channels. The research outcomes have helped establish a client project in a niche field of microbial contamination detection, which is going to commence from August 2022, and has set strong foundations for a project in the field of personal care/microbiome. The outcomes also formed the basis of a recent application to the Fast Start Innovate-UK grant in the field of diabetic foot ulcer prognostic. All these projects have technology and business plan development in scope to support the eventual commercial success of the company. The outcomes are also supporting the growth in network and visibility of the company among the relevant stakeholders. Eventual adoption of the developed microbial detection technologies by the industry or clinic will address multiple themes of the Industrial Strategy Challenge Fund, some of these being Ageing Society (Accelerating detection of disease, Leading-edge healthcare), Future of mobility (Future flight) and Clean Growth (Transforming food production). With an outstanding support from the Director, the project has helped my personal development through the first and rich exposure to working in a business environment. The varied professional skills and knowledge gained around business case preparation, product development, IP, legal, safety and operations will help me contribute much better than before in my role as a "Scientist - Technology Development" in Cromerix. INTELLECTUAL PROPERTY In the near future, I will work closely with the IP attorney on patent filing around the method and materials developed within the FTMA project after doing a patentability assessment and IP strategy development together with the Director. WHAT DID HAPPEN NEXT? OR IS GOING TO HAPPEN NEXT? As mentioned above, the immediate next step is to work on a client project for microbial detection technology development in a niche space. Through this project, I will keep working with the team Cromerix on microbial detection technology development and progression towards commercialisation. Any support through direct funding from NBIC in a future proof of concept (POC) project or cash/in-kind support towards a funding application to another organisation for advancing the TRL of the technology will be vitally important and gratefully received. This FTMA funding was a unique support towards my gaining exposure in a technology start-up environment, which as an innovator I was aiming to get straight after my PhD. In addition to that, I am also getting a position in the company as a full-time employee. The funding also helped the company generate its own IP, which is acting as a foundation to its first projects and proposals. However, further data need to be generated before these IP can be filed as a patent. I hope we can apply for funding support from NBIC for patent filing at the time when it is needed. Also, any support towards my continued professional development (CPD), either through courses within NBIC or funding support to attend these externally will be very helpful and much appreciated. I would like to extend my sincerest thanks to the FTMA funding, which has helped unleash the potential in me and the company to take the first steps towards creating valuable impact to UK's society, economy, and environment.
Start Year 2021
 
Description NBIC FTMA Placement 20_IP_085 Novel rapid methods for broad detection of microbes and microbial activity (Praveen Kaveri) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution My PhD research experience at Loughborough University showed that while it is possible to detect bacteria in principle in a single step using an aptamer probe, there are several challenges to address before this can be successfully applied in practice. In this project, I aim to explore some novel approaches that can address the fundamental challenges around rapid aptamer probe-based detection and make the approach reliable and broadly applicable against any microbe (WP1 and WP2). I will also explore a novel approach for the detection of microbial activity (WP3). The experience of working in Cromerix, a start-up, will be the first of its kind for me as I have never worked in a commercial environment. Unique personal development will be achieved through interactions with client organisations, who bring in specific requirements around the detection of microbes, biofilms and microbial activity. Initial interactions with them have helped in shaping up the problem definition and inspired the novel methods of addressing those problems that I will explore through this project. I also look forward to gaining an exposure of the Alderley Park facilities where Cromerix has been offered a hotdesk. Success of this project will establish the proof of concept of novel rapid methods for broad detection of microbes and microbial activity for the first time. These methods have wide applicability in industry, clinic and home. Thus, this project aligns well with three of the four themes of the Industrial Strategy Challenge Fund: Ageing Society (Accelerating detection of disease, Leading-edge healthcare), Future of mobility (Future flight) and Clean Growth (Transforming food production).
Collaborator Contribution The following outcomes are expected as a result of this visit/placement. 1. New Skills and Knowledge - I will develop new knowledge around the feasibility of some novel generic methods for rapid broad detection of microbes and microbial activity using a. single aptamer probe (WP1), b. dual aptamer probe (WP1), c. catalytic transduction (WP2), and d. enzymatic cleavage (WP3). - I will learn how to liaise, communicate, present and submit reports to industrial clients. - As I aim to progress to the next phase of development working on the successful outcomes of this project, I will gain experience of writing collaborative proposals to funders such as Innovate-UK by working together with the clients. - As an early member of the start-up, I will gain exposure to the key small business operations, including purchase ordering, safety, and intellectual property management. 2. Collaborations This project proposal is guided by the "problem definition" discussions (scoping meetings) Cromerix has had with two established global players in the field of air transport (for microbial biofilms detection) and personal care (for microbial activity detection), where I have participated. The work I will carry out in this project will strengthen these collaborations and potentially lead to investments from these organisations for further technology development, an interest for which has been expressed by these organisations. Successful validation of the proposed generic methods will also allow me to approach organisations in other sectors of industry and clinic to develop new collaborations. 3. Impact Successful validation in this project will lead to further technology development to progress along the TRL and produce workable prototypes in collaboration with the industry partners. The methods being explored have broad applications. The chosen applications are based on interests received from industry players in niche sectors and can be extended to broader sectors of industry, clinic and consumer market. Thus, successful validation and TRL progression based on these methods can be potentially deliver a broad socio-economic impact through new product development around the detection of microbes and microbial activity. I look forward to working with the Alderley Park network as part of Cromerix in creating these translational impacts.
Impact Feedback from academic: I have met and exceeded my objectives of the FTMA project through the following outcomes. Skills and Knowledge The FTMA project gave me a unique experience of working in a start-up environment, which I found different from the academic research experience in many ways. The projects here are more industrial problem-driven rather than curiosity-driven as in a university. There is a greater importance on freedom to operate check before working on an idea. I helped the company Director with background IP search for discussion with the IP attorney, which helped ascertain the freedom to operate of the research I conducted in FTMA. My attending of the client meetings with the Director helped me understand how professionally these meetings are conducted, how NDAs are prepared and signed prior to the first meeting, how presentations are done, and how a problem is defined that is of importance to the client and deliverable within the required timeline, costs, and capacities of a start-up company. Working with the Director, I also learnt how to write industry-focused technical consulting and development proposals, two of which were submitted to clients, and one was submitted to Innovate UK. I have also gained some insights into the importance and challenges of contract negotiations before a project can actually start. The company was supported by NBIC's Accelerator funding for participating in the Alderley Park Accelerator. The Director primarily attended this, but I had the opportunity of getting introduced to the concepts of customer discovery, business plan proposition, and Lean innovation as these are now part of the company's knowledge base and have defined how we as a company approach business development. As an early member of the start-up, I have also gained exposure to the purchase and sales processes and setting up safety and risk assessment documents. Research outcomes For bacterial detection, the key outcomes included • Conserved epitopes for bacteria and novel aptamer beacon probes for broad detection of gram-negative bacteria that are applicable in various fields, including but not restricted to bacterial contamination in industry and environment, and clinical diagnostics of bacterial infections. • A novel method to detect viable bacteria using dual aptamer probes that is applicable for viability detection of other microbes, including fungi. • Conserved proteases and peptide probe for detection of bacterial activity. • A novel colorimetric transduction method for reader-less visual detection using peptide and aptamer probes. This method can be extended to detection of targets beyond bacteria. For fungal detection, the key outcomes included • Conserved epitopes and aptamers against these conserved epitopes with information on regions of interactions, which is now being used to design aptamer beacons for broad fungal detection as part of a client-funded project. For malodour detection and inhibition, the key outcomes included • Identifying the mechanism of malodour production by bacteria secreted from the human axillary glands. • Methods of detection of PatB, an enzyme associated with malodour production, detection of PatB activity and detection of malodour molecules produced by the bacteria. • A method and aptamer for inhibition of production of malodour molecules. Collaborations The outcomes of this FTMA project supported the progression of discussions with two clients, one in a niche field of microbial detection and another in personal care/microbiome. This involved submission of proposals to these organisations. The proposal to the first client (microbial detection) has been accepted after several rounds of discussion and has progressed towards contract negotiation phase. The project is scheduled to commence in August 2022 and will employ me. Progression with the proposal submitted to the second client (personal care/microbiome) has been put on hold by them, reportedly due to their organisational changes. Even if the second client is unable to progress, the outcome should help Cromerix to progress a collaboration on this topic with another organisation in the field of personal care/microbiome. In addition to the abovementioned collaboration, the outcomes of the project have also helped the company to engage with a wider network of stakeholders in the field of microbial detection, which is expected to drive more innovation-led projects supporting technology and business development. Impact The work done in the FTMA project is creating impact through multiple channels. The research outcomes have helped establish a client project in a niche field of microbial contamination detection, which is going to commence from August 2022, and has set strong foundations for a project in the field of personal care/microbiome. The outcomes also formed the basis of a recent application to the Fast Start Innovate-UK grant in the field of diabetic foot ulcer prognostic. All these projects have technology and business plan development in scope to support the eventual commercial success of the company. The outcomes are also supporting the growth in network and visibility of the company among the relevant stakeholders. Eventual adoption of the developed microbial detection technologies by the industry or clinic will address multiple themes of the Industrial Strategy Challenge Fund, some of these being Ageing Society (Accelerating detection of disease, Leading-edge healthcare), Future of mobility (Future flight) and Clean Growth (Transforming food production). With an outstanding support from the Director, the project has helped my personal development through the first and rich exposure to working in a business environment. The varied professional skills and knowledge gained around business case preparation, product development, IP, legal, safety and operations will help me contribute much better than before in my role as a "Scientist - Technology Development" in Cromerix. INTELLECTUAL PROPERTY In the near future, I will work closely with the IP attorney on patent filing around the method and materials developed within the FTMA project after doing a patentability assessment and IP strategy development together with the Director. WHAT DID HAPPEN NEXT? OR IS GOING TO HAPPEN NEXT? As mentioned above, the immediate next step is to work on a client project for microbial detection technology development in a niche space. Through this project, I will keep working with the team Cromerix on microbial detection technology development and progression towards commercialisation. Any support through direct funding from NBIC in a future proof of concept (POC) project or cash/in-kind support towards a funding application to another organisation for advancing the TRL of the technology will be vitally important and gratefully received. This FTMA funding was a unique support towards my gaining exposure in a technology start-up environment, which as an innovator I was aiming to get straight after my PhD. In addition to that, I am also getting a position in the company as a full-time employee. The funding also helped the company generate its own IP, which is acting as a foundation to its first projects and proposals. However, further data need to be generated before these IP can be filed as a patent. I hope we can apply for funding support from NBIC for patent filing at the time when it is needed. Also, any support towards my continued professional development (CPD), either through courses within NBIC or funding support to attend these externally will be very helpful and much appreciated. I would like to extend my sincerest thanks to the FTMA funding, which has helped unleash the potential in me and the company to take the first steps towards creating valuable impact to UK's society, economy, and environment.
Start Year 2021
 
Description NBIC FTMA Placement P_19_05 Improving risk assessment methods for Microbially Influenced Corrosion (MIC) (Jeremy Webb) 
Organisation DNV GL
Country Norway 
Sector Private 
PI Contribution The cost of Microbial Induced Corrosion (MIC) in 2001 to the oil and gas industry was estimated to be between $3-7 Billion and therefore innovation in this area stands to provide significant economic benefit to the energy sector and better enable the UK to prosper from the energy revolution. MIC exerts its impact through damage to pipelines, equipment and products. A range of risk factors are currently used by field operators to predict when biocides and other interventions should be used to mitigate MIC. However, DNV GL and the University of Southampton currently consider the current risk factors to be insufficient to adequately predict equipment and pipeline failure. In this secondment DNV GL and the University of Southampton will further develop project plans to reduce the impact of MIC through innovative biofilm modelling and bioinformatic approaches. Applications across the oil, gas and renewable energy sectors will benefit from prolonged equipment life span, reduced product deterioration and improved biocide regimes, thereby meeting the challenge of 'Prospering from the energy revolution'. This project will build upon Robert Hull's experience in oil microbiology and industrial biofilm technologies. We will develop at least two separate research proposals during this secondment, facilitated through Robert Hull visiting plants and pipelines to identify challenges and carry out proof of concept work. Through the proof of concept work, Robert will gain further expertise in field based DNA sequencing and the use of the Nanopore sequencing platform. Furthermore, the secondment will facilitate the development of industry links, both in the UK and internationally through DNV GL's global research team. Robert would also have the opportunity to take advantage of DNV GL's extensive training program in areas including energy infrastructure and clean energy, gaining valuable expertise aligned with the 'Prospering from the energy revolution'.
Collaborator Contribution Robert Hull will be placed with DNV GL to better understand the processes and operations impacted by biofilm associated MIC in the oil, gas and renewables industry. This will involve training in plant and pipeline operations, and taking part in equipment failure investigations linked to biocorrosion in a 'real world' setting. While at DNV GL, Robert will provide microbiological and biofilm expertise to the company. Industry and particularly DNV GL will benefit from nurturing a centre of microbial corrosion expertise located within England. At present such expertise is associated with the offshore North Sea oil and gas industry centres such as Aberdeen. However, we are increasingly encountering microbial corrosion issues due to biofilm formation within equipment such as wind turbines and onshore assets such as heat exchangers, buried pipelines and high purity water systems. There is also a concern that the utilisation of hydrogen within the UK energy mix would encourage bacterial issues in areas such as underground gas storage. It would be valuable to increase the visibility of such assets within the academic community to facilitate initiation of projects in these areas. DNV GL and the University of Southampton team intend to take forward several plans, supported through this initial FTMA2 collaboration. Future outputs will include joint grant applications and research projects to combat MIC, with the benefits of the site visits and observations made in this secondment. Future research would also look to incorporate a MIC based PhD studentship supported by the University of Southampton, DNV GL and VIA University College. Research outputs would be detailed in joint publications in academic journals. The research from these projects would contribute towards the development of new industry standards for MIC risk assessment and biocide use, leading to reduced costs and enhanced equipment lifespan. These measures have the potential to make investments in energy generation more cost effective, facilitating additional growth in the UK energy sector. Current projects are based on the UK based Oxford Nanopore sequencing platform. Should these projects lead to the adoption of new sequencing based standards by the energy sector, we would expect additional growth by Oxford Nanopore and the creation of new services companies to carry out the sequencing for energy companies. The training carried out, networking opportunities taken and grant applications produced will be detailed in the NBIC final report.
Impact None yet.
Start Year 2020
 
Description NBIC FTMA Placement P_19_05 Improving risk assessment methods for Microbially Influenced Corrosion (MIC) (Jeremy Webb) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The cost of Microbial Induced Corrosion (MIC) in 2001 to the oil and gas industry was estimated to be between $3-7 Billion and therefore innovation in this area stands to provide significant economic benefit to the energy sector and better enable the UK to prosper from the energy revolution. MIC exerts its impact through damage to pipelines, equipment and products. A range of risk factors are currently used by field operators to predict when biocides and other interventions should be used to mitigate MIC. However, DNV GL and the University of Southampton currently consider the current risk factors to be insufficient to adequately predict equipment and pipeline failure. In this secondment DNV GL and the University of Southampton will further develop project plans to reduce the impact of MIC through innovative biofilm modelling and bioinformatic approaches. Applications across the oil, gas and renewable energy sectors will benefit from prolonged equipment life span, reduced product deterioration and improved biocide regimes, thereby meeting the challenge of 'Prospering from the energy revolution'. This project will build upon Robert Hull's experience in oil microbiology and industrial biofilm technologies. We will develop at least two separate research proposals during this secondment, facilitated through Robert Hull visiting plants and pipelines to identify challenges and carry out proof of concept work. Through the proof of concept work, Robert will gain further expertise in field based DNA sequencing and the use of the Nanopore sequencing platform. Furthermore, the secondment will facilitate the development of industry links, both in the UK and internationally through DNV GL's global research team. Robert would also have the opportunity to take advantage of DNV GL's extensive training program in areas including energy infrastructure and clean energy, gaining valuable expertise aligned with the 'Prospering from the energy revolution'.
Collaborator Contribution Robert Hull will be placed with DNV GL to better understand the processes and operations impacted by biofilm associated MIC in the oil, gas and renewables industry. This will involve training in plant and pipeline operations, and taking part in equipment failure investigations linked to biocorrosion in a 'real world' setting. While at DNV GL, Robert will provide microbiological and biofilm expertise to the company. Industry and particularly DNV GL will benefit from nurturing a centre of microbial corrosion expertise located within England. At present such expertise is associated with the offshore North Sea oil and gas industry centres such as Aberdeen. However, we are increasingly encountering microbial corrosion issues due to biofilm formation within equipment such as wind turbines and onshore assets such as heat exchangers, buried pipelines and high purity water systems. There is also a concern that the utilisation of hydrogen within the UK energy mix would encourage bacterial issues in areas such as underground gas storage. It would be valuable to increase the visibility of such assets within the academic community to facilitate initiation of projects in these areas. DNV GL and the University of Southampton team intend to take forward several plans, supported through this initial FTMA2 collaboration. Future outputs will include joint grant applications and research projects to combat MIC, with the benefits of the site visits and observations made in this secondment. Future research would also look to incorporate a MIC based PhD studentship supported by the University of Southampton, DNV GL and VIA University College. Research outputs would be detailed in joint publications in academic journals. The research from these projects would contribute towards the development of new industry standards for MIC risk assessment and biocide use, leading to reduced costs and enhanced equipment lifespan. These measures have the potential to make investments in energy generation more cost effective, facilitating additional growth in the UK energy sector. Current projects are based on the UK based Oxford Nanopore sequencing platform. Should these projects lead to the adoption of new sequencing based standards by the energy sector, we would expect additional growth by Oxford Nanopore and the creation of new services companies to carry out the sequencing for energy companies. The training carried out, networking opportunities taken and grant applications produced will be detailed in the NBIC final report.
Impact None yet.
Start Year 2020
 
Description NBIC FTMA Placement P_19_05 Improving risk assessment methods for Microbially Influenced Corrosion (MIC) (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution The cost of Microbial Induced Corrosion (MIC) in 2001 to the oil and gas industry was estimated to be between $3-7 Billion and therefore innovation in this area stands to provide significant economic benefit to the energy sector and better enable the UK to prosper from the energy revolution. MIC exerts its impact through damage to pipelines, equipment and products. A range of risk factors are currently used by field operators to predict when biocides and other interventions should be used to mitigate MIC. However, DNV GL and the University of Southampton currently consider the current risk factors to be insufficient to adequately predict equipment and pipeline failure. In this secondment DNV GL and the University of Southampton will further develop project plans to reduce the impact of MIC through innovative biofilm modelling and bioinformatic approaches. Applications across the oil, gas and renewable energy sectors will benefit from prolonged equipment life span, reduced product deterioration and improved biocide regimes, thereby meeting the challenge of 'Prospering from the energy revolution'. This project will build upon Robert Hull's experience in oil microbiology and industrial biofilm technologies. We will develop at least two separate research proposals during this secondment, facilitated through Robert Hull visiting plants and pipelines to identify challenges and carry out proof of concept work. Through the proof of concept work, Robert will gain further expertise in field based DNA sequencing and the use of the Nanopore sequencing platform. Furthermore, the secondment will facilitate the development of industry links, both in the UK and internationally through DNV GL's global research team. Robert would also have the opportunity to take advantage of DNV GL's extensive training program in areas including energy infrastructure and clean energy, gaining valuable expertise aligned with the 'Prospering from the energy revolution'.
Collaborator Contribution Robert Hull will be placed with DNV GL to better understand the processes and operations impacted by biofilm associated MIC in the oil, gas and renewables industry. This will involve training in plant and pipeline operations, and taking part in equipment failure investigations linked to biocorrosion in a 'real world' setting. While at DNV GL, Robert will provide microbiological and biofilm expertise to the company. Industry and particularly DNV GL will benefit from nurturing a centre of microbial corrosion expertise located within England. At present such expertise is associated with the offshore North Sea oil and gas industry centres such as Aberdeen. However, we are increasingly encountering microbial corrosion issues due to biofilm formation within equipment such as wind turbines and onshore assets such as heat exchangers, buried pipelines and high purity water systems. There is also a concern that the utilisation of hydrogen within the UK energy mix would encourage bacterial issues in areas such as underground gas storage. It would be valuable to increase the visibility of such assets within the academic community to facilitate initiation of projects in these areas. DNV GL and the University of Southampton team intend to take forward several plans, supported through this initial FTMA2 collaboration. Future outputs will include joint grant applications and research projects to combat MIC, with the benefits of the site visits and observations made in this secondment. Future research would also look to incorporate a MIC based PhD studentship supported by the University of Southampton, DNV GL and VIA University College. Research outputs would be detailed in joint publications in academic journals. The research from these projects would contribute towards the development of new industry standards for MIC risk assessment and biocide use, leading to reduced costs and enhanced equipment lifespan. These measures have the potential to make investments in energy generation more cost effective, facilitating additional growth in the UK energy sector. Current projects are based on the UK based Oxford Nanopore sequencing platform. Should these projects lead to the adoption of new sequencing based standards by the energy sector, we would expect additional growth by Oxford Nanopore and the creation of new services companies to carry out the sequencing for energy companies. The training carried out, networking opportunities taken and grant applications produced will be detailed in the NBIC final report.
Impact None yet.
Start Year 2020
 
Description NBIC FTMA Placement P_19_08 Assessment of the surface cleaning efficiency of Steam-e devices against environmental microbial contamination and biofilms (Nany Malissa Rahimi) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution In this placement, I will spend three months working for Steam-e to provide a preliminary assessment of their novel and patented cleaning technology. Steam-e have developed a range of cleaning devices to enable rapid and efficient decontamination for a variety of environments. The technology works by using recirculated cold water that passes through a handheld fluent heater, which provides instant heating to 156°C. This results in directed steam production at a temperature of 115°C. To date, the portable devices have been designed to remove chewing gum, or act as a general purpose steam cleaner for commercial cleaning. Due to the safe, rapid and efficient design of the cleaning process, I will be investigating whether the technology can provide effective cleaning and decontamination of microbial populations including biofilms. To do this, I will use a series of indicator organisms to initially assess whether the steam treatment inactivates the key bacteria (Gram negative and Gram positive), including spore-forming species. The species to be focused on will include: Klebsiella pneumoniae, MRSA and Clostridium difficile (all important hospital pathogens); Salomonella spp. and Listeria monocytogenes (important in food production); and the industry standard indicator Geobacillus stearothermophilus. Following this, the action of the device on biofilms will be assessed. This work will provide experience on standard testing as required for product development and evaluation. Throughout, I will be working alongside Steam-e engineers and company representatives, providing me with commercial experience and insight into product design and improvement. I will also learn about market analysis and gain understanding on the challenges encountered with different markets; NHS, food production and other regulated industries.
Collaborator Contribution Steam-e has not explored antimicrobial markets and, if successful, a range of devices could be developed following this initial phase of testing. The problems of antimicrobial resistance and effective cleaning are major global challenges, with the latter having a clear impact on controlling the former by improved decontamination. Improved cleaning has implications in a wide range of industries and environments, not least food production and handling, and infection prevention both for animal husbandry and in healthcare facilities. The broad scope and potential for this technology has important socio-economic impact with global reach. Considering infection prevention in healthcare facilities and hospitals, we know environmental contamination is a key driver in continued healthcare associated infections, and a technology which provides rapid and effective cleaning would be highly beneficial. The ability to effectively clean following bacterial (including spore-forming), viral and fungal outbreaks, in a simple way, minimizing ward closure times would improve patient outcomes as well as having considerable financial savings. Following this project, the team would apply for further funding to allow more detailed testing and scaleup. Depending on the application, this funding could be from the NIHR i4i programme, allowing clinical evaluation and testing. The team has strong links to University Hospital Southampton and the Infection Prevention team, as well as Wessex Academic Health Services Network. Within the food and agri-tech industries, the team have further links to facilities that could offer subsequent pilot testing, with funding potential from BBSRC and Innovate identified. Initially, the placement results will be used to produce a final report to inform product design and development. With the consent of all parties, if appropriate, data will be used for a scientific paper and presented at appropriate conferences. The intention is for the placement to lead to a programme of collaborative work between Steam-e, the University of Southampton and NBIC.
Impact Feedback from academic: This project has given insight from the research conducted against biofilms, which added value to their market analysis. It has expanded my commercial experience in also providing feedbacks into decontamination product development. To date, the Steam-E which have been designed to remove chewing gum and used as a general-purpose steam cleaner for commercial cleaning. Therefore, the study evaluates the antibacterial potential of Gum-E as a disinfection machine in managing and preventing biofilm infection. The testing was conducted on three different biofilm ages (24h, 48h and 7d) and further categorised into clean and dirty. These biofilm parameters were used to see if there would be any log reduction after treatment times of 5mins, 10s, 5s, 3s, and 1s with Gum-E. The preliminary study on harvested biofilm from the control SS coupons (without steam treatment) when analysed using two-way ANOVA showed that there are significant differences between clean and dirty biofilm aged 24h (p < 0.0001) and 7d (P=0.0003), but not for 48h (p=0.2820). Overall, all biofilm types and ages showed total reduction (100%) with 10s and 5mins of Gum-E treatment. The 5s treatment were able to give total reduction (100%) in the 24h dirty biofilm sample compared to 24h clean biofilm which showed 4-log reduction (99.99%). In 48h sample, the 5s treatment were able to give 3.9-log reduction in clean compared to dirty with 4.4-log reduction. In 7d sample, total reduction (100%) were achieved with 5s treatment for both dirty and clean biofilm sample. Overall, for each treatment of 1s, 3s and 5s showed no significant differences on the log reduction between clean and dirty samples (p>0.9999). The 1s of Gum-E treatment showed a minimum of 2-log reduction (99%) in the 7d dirty sample and a maximum of 3-log reduction (99.9%) in the 24h dirty sample. This shows that Gum-E is an effective and rapid cleaning device that is not affected by the presence of organic matter. Biofilms has been a major prevalent cause in hospital-acquired infections (HAI) and this research has shown that Gum-E machine is able to eliminate if not reduce this risk if used by health partners like the NHS as well as it being useful in food production and other regulated industries. This is also in addition to the recent global COVID19, the Gum-E has the potential in being a portable decontamination machine.
Start Year 2019
 
Description NBIC FTMA Placement P_19_08 Assessment of the surface cleaning efficiency of Steam-e devices against environmental microbial contamination and biofilms (Nany Malissa Rahimi) 
Organisation Steam-e Holdings Limited
Country United Kingdom 
Sector Private 
PI Contribution In this placement, I will spend three months working for Steam-e to provide a preliminary assessment of their novel and patented cleaning technology. Steam-e have developed a range of cleaning devices to enable rapid and efficient decontamination for a variety of environments. The technology works by using recirculated cold water that passes through a handheld fluent heater, which provides instant heating to 156°C. This results in directed steam production at a temperature of 115°C. To date, the portable devices have been designed to remove chewing gum, or act as a general purpose steam cleaner for commercial cleaning. Due to the safe, rapid and efficient design of the cleaning process, I will be investigating whether the technology can provide effective cleaning and decontamination of microbial populations including biofilms. To do this, I will use a series of indicator organisms to initially assess whether the steam treatment inactivates the key bacteria (Gram negative and Gram positive), including spore-forming species. The species to be focused on will include: Klebsiella pneumoniae, MRSA and Clostridium difficile (all important hospital pathogens); Salomonella spp. and Listeria monocytogenes (important in food production); and the industry standard indicator Geobacillus stearothermophilus. Following this, the action of the device on biofilms will be assessed. This work will provide experience on standard testing as required for product development and evaluation. Throughout, I will be working alongside Steam-e engineers and company representatives, providing me with commercial experience and insight into product design and improvement. I will also learn about market analysis and gain understanding on the challenges encountered with different markets; NHS, food production and other regulated industries.
Collaborator Contribution Steam-e has not explored antimicrobial markets and, if successful, a range of devices could be developed following this initial phase of testing. The problems of antimicrobial resistance and effective cleaning are major global challenges, with the latter having a clear impact on controlling the former by improved decontamination. Improved cleaning has implications in a wide range of industries and environments, not least food production and handling, and infection prevention both for animal husbandry and in healthcare facilities. The broad scope and potential for this technology has important socio-economic impact with global reach. Considering infection prevention in healthcare facilities and hospitals, we know environmental contamination is a key driver in continued healthcare associated infections, and a technology which provides rapid and effective cleaning would be highly beneficial. The ability to effectively clean following bacterial (including spore-forming), viral and fungal outbreaks, in a simple way, minimizing ward closure times would improve patient outcomes as well as having considerable financial savings. Following this project, the team would apply for further funding to allow more detailed testing and scaleup. Depending on the application, this funding could be from the NIHR i4i programme, allowing clinical evaluation and testing. The team has strong links to University Hospital Southampton and the Infection Prevention team, as well as Wessex Academic Health Services Network. Within the food and agri-tech industries, the team have further links to facilities that could offer subsequent pilot testing, with funding potential from BBSRC and Innovate identified. Initially, the placement results will be used to produce a final report to inform product design and development. With the consent of all parties, if appropriate, data will be used for a scientific paper and presented at appropriate conferences. The intention is for the placement to lead to a programme of collaborative work between Steam-e, the University of Southampton and NBIC.
Impact Feedback from academic: This project has given insight from the research conducted against biofilms, which added value to their market analysis. It has expanded my commercial experience in also providing feedbacks into decontamination product development. To date, the Steam-E which have been designed to remove chewing gum and used as a general-purpose steam cleaner for commercial cleaning. Therefore, the study evaluates the antibacterial potential of Gum-E as a disinfection machine in managing and preventing biofilm infection. The testing was conducted on three different biofilm ages (24h, 48h and 7d) and further categorised into clean and dirty. These biofilm parameters were used to see if there would be any log reduction after treatment times of 5mins, 10s, 5s, 3s, and 1s with Gum-E. The preliminary study on harvested biofilm from the control SS coupons (without steam treatment) when analysed using two-way ANOVA showed that there are significant differences between clean and dirty biofilm aged 24h (p < 0.0001) and 7d (P=0.0003), but not for 48h (p=0.2820). Overall, all biofilm types and ages showed total reduction (100%) with 10s and 5mins of Gum-E treatment. The 5s treatment were able to give total reduction (100%) in the 24h dirty biofilm sample compared to 24h clean biofilm which showed 4-log reduction (99.99%). In 48h sample, the 5s treatment were able to give 3.9-log reduction in clean compared to dirty with 4.4-log reduction. In 7d sample, total reduction (100%) were achieved with 5s treatment for both dirty and clean biofilm sample. Overall, for each treatment of 1s, 3s and 5s showed no significant differences on the log reduction between clean and dirty samples (p>0.9999). The 1s of Gum-E treatment showed a minimum of 2-log reduction (99%) in the 7d dirty sample and a maximum of 3-log reduction (99.9%) in the 24h dirty sample. This shows that Gum-E is an effective and rapid cleaning device that is not affected by the presence of organic matter. Biofilms has been a major prevalent cause in hospital-acquired infections (HAI) and this research has shown that Gum-E machine is able to eliminate if not reduce this risk if used by health partners like the NHS as well as it being useful in food production and other regulated industries. This is also in addition to the recent global COVID19, the Gum-E has the potential in being a portable decontamination machine.
Start Year 2019
 
Description NBIC FTMA Placement P_19_08 Assessment of the surface cleaning efficiency of Steam-e devices against environmental microbial contamination and biofilms (Nany Malissa Rahimi) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution In this placement, I will spend three months working for Steam-e to provide a preliminary assessment of their novel and patented cleaning technology. Steam-e have developed a range of cleaning devices to enable rapid and efficient decontamination for a variety of environments. The technology works by using recirculated cold water that passes through a handheld fluent heater, which provides instant heating to 156°C. This results in directed steam production at a temperature of 115°C. To date, the portable devices have been designed to remove chewing gum, or act as a general purpose steam cleaner for commercial cleaning. Due to the safe, rapid and efficient design of the cleaning process, I will be investigating whether the technology can provide effective cleaning and decontamination of microbial populations including biofilms. To do this, I will use a series of indicator organisms to initially assess whether the steam treatment inactivates the key bacteria (Gram negative and Gram positive), including spore-forming species. The species to be focused on will include: Klebsiella pneumoniae, MRSA and Clostridium difficile (all important hospital pathogens); Salomonella spp. and Listeria monocytogenes (important in food production); and the industry standard indicator Geobacillus stearothermophilus. Following this, the action of the device on biofilms will be assessed. This work will provide experience on standard testing as required for product development and evaluation. Throughout, I will be working alongside Steam-e engineers and company representatives, providing me with commercial experience and insight into product design and improvement. I will also learn about market analysis and gain understanding on the challenges encountered with different markets; NHS, food production and other regulated industries.
Collaborator Contribution Steam-e has not explored antimicrobial markets and, if successful, a range of devices could be developed following this initial phase of testing. The problems of antimicrobial resistance and effective cleaning are major global challenges, with the latter having a clear impact on controlling the former by improved decontamination. Improved cleaning has implications in a wide range of industries and environments, not least food production and handling, and infection prevention both for animal husbandry and in healthcare facilities. The broad scope and potential for this technology has important socio-economic impact with global reach. Considering infection prevention in healthcare facilities and hospitals, we know environmental contamination is a key driver in continued healthcare associated infections, and a technology which provides rapid and effective cleaning would be highly beneficial. The ability to effectively clean following bacterial (including spore-forming), viral and fungal outbreaks, in a simple way, minimizing ward closure times would improve patient outcomes as well as having considerable financial savings. Following this project, the team would apply for further funding to allow more detailed testing and scaleup. Depending on the application, this funding could be from the NIHR i4i programme, allowing clinical evaluation and testing. The team has strong links to University Hospital Southampton and the Infection Prevention team, as well as Wessex Academic Health Services Network. Within the food and agri-tech industries, the team have further links to facilities that could offer subsequent pilot testing, with funding potential from BBSRC and Innovate identified. Initially, the placement results will be used to produce a final report to inform product design and development. With the consent of all parties, if appropriate, data will be used for a scientific paper and presented at appropriate conferences. The intention is for the placement to lead to a programme of collaborative work between Steam-e, the University of Southampton and NBIC.
Impact Feedback from academic: This project has given insight from the research conducted against biofilms, which added value to their market analysis. It has expanded my commercial experience in also providing feedbacks into decontamination product development. To date, the Steam-E which have been designed to remove chewing gum and used as a general-purpose steam cleaner for commercial cleaning. Therefore, the study evaluates the antibacterial potential of Gum-E as a disinfection machine in managing and preventing biofilm infection. The testing was conducted on three different biofilm ages (24h, 48h and 7d) and further categorised into clean and dirty. These biofilm parameters were used to see if there would be any log reduction after treatment times of 5mins, 10s, 5s, 3s, and 1s with Gum-E. The preliminary study on harvested biofilm from the control SS coupons (without steam treatment) when analysed using two-way ANOVA showed that there are significant differences between clean and dirty biofilm aged 24h (p < 0.0001) and 7d (P=0.0003), but not for 48h (p=0.2820). Overall, all biofilm types and ages showed total reduction (100%) with 10s and 5mins of Gum-E treatment. The 5s treatment were able to give total reduction (100%) in the 24h dirty biofilm sample compared to 24h clean biofilm which showed 4-log reduction (99.99%). In 48h sample, the 5s treatment were able to give 3.9-log reduction in clean compared to dirty with 4.4-log reduction. In 7d sample, total reduction (100%) were achieved with 5s treatment for both dirty and clean biofilm sample. Overall, for each treatment of 1s, 3s and 5s showed no significant differences on the log reduction between clean and dirty samples (p>0.9999). The 1s of Gum-E treatment showed a minimum of 2-log reduction (99%) in the 7d dirty sample and a maximum of 3-log reduction (99.9%) in the 24h dirty sample. This shows that Gum-E is an effective and rapid cleaning device that is not affected by the presence of organic matter. Biofilms has been a major prevalent cause in hospital-acquired infections (HAI) and this research has shown that Gum-E machine is able to eliminate if not reduce this risk if used by health partners like the NHS as well as it being useful in food production and other regulated industries. This is also in addition to the recent global COVID19, the Gum-E has the potential in being a portable decontamination machine.
Start Year 2019
 
Description NBIC FTMA Placement P_19_2_38 Removal of Oral Biofilm by Activated Oxygen: A Targeted Study (Claudio Lourenco) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution This industrial placement will provide an outstanding opportunity to apply all the knowledge and findings acquired during my EngD research degree at UCL. The aims and objectives of this project are to perform real time imaging of the removal of oral biofilm by reactive oxygen species (ROS) generated in denture cleansers. By employing scanning laser confocal microscopy with a three-dye combination, that will allow the visualization of the biofilm sugary matrix and its microorganisms and therefore, access which structures are being targeted by the ROS produced. In this research project, we aim to develop a dual species biofilm using Candida albicans and Streptococcus mutans. Both microorganisms are part of our microflora, C. albicans is the most prevalent cause of fungal infections in humans and when out of control, in the oral cavity, can cause several complications including candidiasis and stomatitis, Streptococcus mutans is a early colonizer of the mouth cavity, known to produce a polysaccharide matrix that acts as scaffolding for microorganisms that make the oral biofilm. This industrial placement is an excellent opportunity to carry out a set of unique inter-linking activities with private industry, allowing me to develop my research skills as an independent researcher to apply for further funding. This research project will provide new insights on the mode of action of ROS in the removal of biofilms and the killing of bacteria to prevent recurring oral complications plaguing denture wearers. Thus, this project is expected to have a remarkable international impact, attracting a wide interdisciplinary recognition and opening the door to future collaborations between GSK-CH and UCL by promoting the use of combined resources and knowledge exchange.
Collaborator Contribution In the initial stage of this project an oral presentation will be delivered, to share the major findings and techniques used throughout my EngD studies, to the relevant teams at the GSK-CH. I will be showing the effectiveness and advantages in the use of H-NMR and fluorimetry to screen existing and future formulations of denture cleansers. And at the same time show the capabilities of the equipment available at UCL and promote the exchange of resources and expertise between both institutions. On the societal aspect the relevance of this project arises from the fact that dentures are not only a concern for the elderly people. Recently the Oral Health Foundation has reported that 16% of the UK population wear dentures, including a million of people aged between 16 to 44. According with the Special Eurobarometer Oral Health denture wearers experience complications such as toothache, painful gums and sore spots that lead to chewing and biting problems affecting their diet and nutrition, as well as the aesthetic point of view, mainly cause by the growth of biofilm in dentures. In addition, the World Health Organization (WHO) has predicted that the number of patients requiring dentures worldwide will increase in the future years. In addition, recent studies suggests that the oral cavity microflora can contribute to systemic and chronic diseases but also more commonly for denture wearers denture associated stomatitis, caused mainly by an increase in Candida albicans, and mal odour caused by other microorganisms. Therefore, there is a significant need to improve the cleaning and disinfection mechanisms in oral care products for dentures. The main agent of our product is peracetic acid that is known to be a powerful bleaching and antimicrobial agent with a proven track of success. It has several applications ranging from disinfectant in hospitals to bleaching agent in household laundry. Therefore, in a near future the findings of this project can effectively impact other relevant areas where disinfection and removal of bacteria are a major concern. The development of this technology will provide fresh insight into existing infrastructure, attracting industrial interest that could lead to the development of commercial pathways for the promising formulations that will be developed in this industrial placement. Furthermore, a joint publication between UCL and GSK-CH on a peer reviewed journal will be drafted and the findings of this study will also be presented at a major international meeting.
Impact The main outcome of the project was the data concerning the effects of the pH on the generation of ROS in a simple formulation. This knowledge can be relevant when considering the development of novel formulations. The current formulations operate at a pH close to neutral that is within the optimal range for the reaction to take place in a effective way but a more acidic pH seemed to contribute for the stability of peracetic acid. As result of the work being conducted at UCL, the industrial partner GSK had more questions that needed answers and another project was funded and set up to study other formulations using the techniques developed throughout my EngD studies a UCL. A clear indicator of the success of the initial project and the advantages and quality of work conducted within the Department of Chemistry of UCL. Ideally the project must evolve for the next step that will be to observe how the pH effects towards the stability of peracetic acid will contribute to biofilm removal. In the case that it is more effective than the current formulations, that use neutral pH, a closer look and further investigations will be necessary. The fact that peracetic acid is widely used to sanitize and clean surfaces there is also the potential develop the product for other applications. I have recently left UCL therefore will not be possible for me to continue with this project but I am happy to contribute with my knowledge and expertise in the field if anyone in the future is willing to take up on this research.
Start Year 2020
 
Description NBIC FTMA Placement P_19_2_38 Removal of Oral Biofilm by Activated Oxygen: A Targeted Study (Claudio Lourenco) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This industrial placement will provide an outstanding opportunity to apply all the knowledge and findings acquired during my EngD research degree at UCL. The aims and objectives of this project are to perform real time imaging of the removal of oral biofilm by reactive oxygen species (ROS) generated in denture cleansers. By employing scanning laser confocal microscopy with a three-dye combination, that will allow the visualization of the biofilm sugary matrix and its microorganisms and therefore, access which structures are being targeted by the ROS produced. In this research project, we aim to develop a dual species biofilm using Candida albicans and Streptococcus mutans. Both microorganisms are part of our microflora, C. albicans is the most prevalent cause of fungal infections in humans and when out of control, in the oral cavity, can cause several complications including candidiasis and stomatitis, Streptococcus mutans is a early colonizer of the mouth cavity, known to produce a polysaccharide matrix that acts as scaffolding for microorganisms that make the oral biofilm. This industrial placement is an excellent opportunity to carry out a set of unique inter-linking activities with private industry, allowing me to develop my research skills as an independent researcher to apply for further funding. This research project will provide new insights on the mode of action of ROS in the removal of biofilms and the killing of bacteria to prevent recurring oral complications plaguing denture wearers. Thus, this project is expected to have a remarkable international impact, attracting a wide interdisciplinary recognition and opening the door to future collaborations between GSK-CH and UCL by promoting the use of combined resources and knowledge exchange.
Collaborator Contribution In the initial stage of this project an oral presentation will be delivered, to share the major findings and techniques used throughout my EngD studies, to the relevant teams at the GSK-CH. I will be showing the effectiveness and advantages in the use of H-NMR and fluorimetry to screen existing and future formulations of denture cleansers. And at the same time show the capabilities of the equipment available at UCL and promote the exchange of resources and expertise between both institutions. On the societal aspect the relevance of this project arises from the fact that dentures are not only a concern for the elderly people. Recently the Oral Health Foundation has reported that 16% of the UK population wear dentures, including a million of people aged between 16 to 44. According with the Special Eurobarometer Oral Health denture wearers experience complications such as toothache, painful gums and sore spots that lead to chewing and biting problems affecting their diet and nutrition, as well as the aesthetic point of view, mainly cause by the growth of biofilm in dentures. In addition, the World Health Organization (WHO) has predicted that the number of patients requiring dentures worldwide will increase in the future years. In addition, recent studies suggests that the oral cavity microflora can contribute to systemic and chronic diseases but also more commonly for denture wearers denture associated stomatitis, caused mainly by an increase in Candida albicans, and mal odour caused by other microorganisms. Therefore, there is a significant need to improve the cleaning and disinfection mechanisms in oral care products for dentures. The main agent of our product is peracetic acid that is known to be a powerful bleaching and antimicrobial agent with a proven track of success. It has several applications ranging from disinfectant in hospitals to bleaching agent in household laundry. Therefore, in a near future the findings of this project can effectively impact other relevant areas where disinfection and removal of bacteria are a major concern. The development of this technology will provide fresh insight into existing infrastructure, attracting industrial interest that could lead to the development of commercial pathways for the promising formulations that will be developed in this industrial placement. Furthermore, a joint publication between UCL and GSK-CH on a peer reviewed journal will be drafted and the findings of this study will also be presented at a major international meeting.
Impact The main outcome of the project was the data concerning the effects of the pH on the generation of ROS in a simple formulation. This knowledge can be relevant when considering the development of novel formulations. The current formulations operate at a pH close to neutral that is within the optimal range for the reaction to take place in a effective way but a more acidic pH seemed to contribute for the stability of peracetic acid. As result of the work being conducted at UCL, the industrial partner GSK had more questions that needed answers and another project was funded and set up to study other formulations using the techniques developed throughout my EngD studies a UCL. A clear indicator of the success of the initial project and the advantages and quality of work conducted within the Department of Chemistry of UCL. Ideally the project must evolve for the next step that will be to observe how the pH effects towards the stability of peracetic acid will contribute to biofilm removal. In the case that it is more effective than the current formulations, that use neutral pH, a closer look and further investigations will be necessary. The fact that peracetic acid is widely used to sanitize and clean surfaces there is also the potential develop the product for other applications. I have recently left UCL therefore will not be possible for me to continue with this project but I am happy to contribute with my knowledge and expertise in the field if anyone in the future is willing to take up on this research.
Start Year 2020
 
Description NBIC FTMA Placement P_19_2_38 Removal of Oral Biofilm by Activated Oxygen: A Targeted Study (Claudio Lourenco) 
Organisation University College London
Country United Kingdom 
Sector Academic/University 
PI Contribution This industrial placement will provide an outstanding opportunity to apply all the knowledge and findings acquired during my EngD research degree at UCL. The aims and objectives of this project are to perform real time imaging of the removal of oral biofilm by reactive oxygen species (ROS) generated in denture cleansers. By employing scanning laser confocal microscopy with a three-dye combination, that will allow the visualization of the biofilm sugary matrix and its microorganisms and therefore, access which structures are being targeted by the ROS produced. In this research project, we aim to develop a dual species biofilm using Candida albicans and Streptococcus mutans. Both microorganisms are part of our microflora, C. albicans is the most prevalent cause of fungal infections in humans and when out of control, in the oral cavity, can cause several complications including candidiasis and stomatitis, Streptococcus mutans is a early colonizer of the mouth cavity, known to produce a polysaccharide matrix that acts as scaffolding for microorganisms that make the oral biofilm. This industrial placement is an excellent opportunity to carry out a set of unique inter-linking activities with private industry, allowing me to develop my research skills as an independent researcher to apply for further funding. This research project will provide new insights on the mode of action of ROS in the removal of biofilms and the killing of bacteria to prevent recurring oral complications plaguing denture wearers. Thus, this project is expected to have a remarkable international impact, attracting a wide interdisciplinary recognition and opening the door to future collaborations between GSK-CH and UCL by promoting the use of combined resources and knowledge exchange.
Collaborator Contribution In the initial stage of this project an oral presentation will be delivered, to share the major findings and techniques used throughout my EngD studies, to the relevant teams at the GSK-CH. I will be showing the effectiveness and advantages in the use of H-NMR and fluorimetry to screen existing and future formulations of denture cleansers. And at the same time show the capabilities of the equipment available at UCL and promote the exchange of resources and expertise between both institutions. On the societal aspect the relevance of this project arises from the fact that dentures are not only a concern for the elderly people. Recently the Oral Health Foundation has reported that 16% of the UK population wear dentures, including a million of people aged between 16 to 44. According with the Special Eurobarometer Oral Health denture wearers experience complications such as toothache, painful gums and sore spots that lead to chewing and biting problems affecting their diet and nutrition, as well as the aesthetic point of view, mainly cause by the growth of biofilm in dentures. In addition, the World Health Organization (WHO) has predicted that the number of patients requiring dentures worldwide will increase in the future years. In addition, recent studies suggests that the oral cavity microflora can contribute to systemic and chronic diseases but also more commonly for denture wearers denture associated stomatitis, caused mainly by an increase in Candida albicans, and mal odour caused by other microorganisms. Therefore, there is a significant need to improve the cleaning and disinfection mechanisms in oral care products for dentures. The main agent of our product is peracetic acid that is known to be a powerful bleaching and antimicrobial agent with a proven track of success. It has several applications ranging from disinfectant in hospitals to bleaching agent in household laundry. Therefore, in a near future the findings of this project can effectively impact other relevant areas where disinfection and removal of bacteria are a major concern. The development of this technology will provide fresh insight into existing infrastructure, attracting industrial interest that could lead to the development of commercial pathways for the promising formulations that will be developed in this industrial placement. Furthermore, a joint publication between UCL and GSK-CH on a peer reviewed journal will be drafted and the findings of this study will also be presented at a major international meeting.
Impact The main outcome of the project was the data concerning the effects of the pH on the generation of ROS in a simple formulation. This knowledge can be relevant when considering the development of novel formulations. The current formulations operate at a pH close to neutral that is within the optimal range for the reaction to take place in a effective way but a more acidic pH seemed to contribute for the stability of peracetic acid. As result of the work being conducted at UCL, the industrial partner GSK had more questions that needed answers and another project was funded and set up to study other formulations using the techniques developed throughout my EngD studies a UCL. A clear indicator of the success of the initial project and the advantages and quality of work conducted within the Department of Chemistry of UCL. Ideally the project must evolve for the next step that will be to observe how the pH effects towards the stability of peracetic acid will contribute to biofilm removal. In the case that it is more effective than the current formulations, that use neutral pH, a closer look and further investigations will be necessary. The fact that peracetic acid is widely used to sanitize and clean surfaces there is also the potential develop the product for other applications. I have recently left UCL therefore will not be possible for me to continue with this project but I am happy to contribute with my knowledge and expertise in the field if anyone in the future is willing to take up on this research.
Start Year 2020
 
Description NBIC FTMA Placement P_19_2_44 Mechanical properties of biofilm on complex substrate (Zhenyu Zhang) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of this project is to place Maria Masoura, a PhD student with microbiology background, in a world-leading chemical company, Procter & Gamble to: 1. establish appreciation of industrial perspectives of biofilm; 2. develop industrial links with P&G; 3. identify key parameters that manage and engineer biofilms on complex substrates. During the three months placement period, Maria plans to systematically investigate and measure microbial adhesion to model soils and the mechanical properties of the biofilm/soil complex consequently formed. The scientific nature of the proposal is aligned with at least two areas outlined in the ISCF: accelerating detection of disease, and healthy ageing. Biofilms represent a major concern in industry and hospital healthcare settings where they cause severe structural and health problems (Jose Luis Del Pozo 2017; Gibson et al. 1997). Nowadays, the majority of efforts to treat biofilms are based on antimicrobial agents, which has led to one of the biggest issue in the world that is the bacteria and microorganisms antimicrobial resistance (AMR). The decrease of the effectiveness of these agents poses a serious concern and new ways for tackling biofilms without using antimicrobials are needed. The quantification of adhesion and cohesion forces is crucial in understanding, predicting and modelling biofilm development and removal. The primary objective for the placement is to identify the models and characterize the system as a function of the environment, such as pH, Relative Humidity, temperature, ionic strength, and time. We wish to use the opportunity to exchange both personnel and knowledge between academic (UoB) and industrial sectors (P&G). The placement holder will be exposed to a modern cooperate training package such as management skills, technical skills such as bacteria growth and monitoring for chemical industry.
Collaborator Contribution It is anticipated that the outcomes of the planned exchange include the following: 1. New skills: to be transferred between the University of Birmingham to P&G. Maria will use her expertise in microbiology to analyse the presence of biofilms on substrates that are of interest to both industrial and household related applications. In return, Maria will have the opportunity to be trained on a variety of industrial protocols that are not available under an academic research settings. 2. Personal development: Maria will establish in-depth appreciation of industrial perspective on engineering and managing biofilm. Furthermore, she will develop connections with colleagues at P&G, which is tremendously invaluable to an early career researcher. Furthermore, Maria will be offered to attend a number of bespoke training courses by P&G to develop her transferrable skills such as Project Management. 3. New knowledge: concerning the presence and mechanical integrity of biofilms will be generated, which bears fundamental importance to both academic research and industrial impact. This links the past work over different length scales (Goode 2013, Pen 2011), alongside the industrial R&D work. 4. Immediate collaboration: upon success of the placement, whereby key parameters that influence the mechanical properties of biofilm are identified, P&G will commit a further £60k to systematically expand the investigation, as indicated in the supporting letter. This would also strengthen the connection between Maria and colleagues at P&G developed through the placement. 5. Future partnership: University of Birmingham has a strategic partnership with P&G, for the past two decades, with a focus on the Formulation Engineering related work. The proposed work is closely related to the development of new formulated products or processes, and opens new avenues for future collaboration. 6. Societal impact: The learning outcome will help to design new strategies in addressing biofilm related issues in household and healthcare environment. Its impact to our society will be amplified and implemented through large organisation such as P&G who has an established and closed loop in transferring knowledge to real time. We will also engage with other potential partners through the National Biofilm Innovation Centre, to not only disseminate the findings, but to prompt the protocols and techniques developed.
Impact Together with the industrial partners, Dr Masoura identified the skin microbes that are of interest to the particular end applications, and developed the corresponding biofilms on fabrics, which provided invaluable insight to the company in understanding the influence of microbiological activities on the development of fabric care products. A key outcome of the project was to identify the factor(s) that control the adhesion and cohesion of such biofilms - this could be used for the development of new technologies in preventing and removing biofilms from fabrics. Our industrial partner, P&G, was delighted by the initial results generated by Dr Masoura and committed a follow-on fund of £60k to support Maria as a Research Fellow at the University of Birmingham continuing her investigation with a systematic manner. No other support is required from the NBIC for this project. Dr Masoura had subsequently developed her connection with another SME using natural materials for food packaging, and plans to submit a research proposal in the upcoming round of funding call.
Start Year 2020
 
Description NBIC FTMA Placement P_19_2_44 Mechanical properties of biofilm on complex substrate (Zhenyu Zhang) 
Organisation Procter & Gamble
Country United States 
Sector Private 
PI Contribution The aim of this project is to place Maria Masoura, a PhD student with microbiology background, in a world-leading chemical company, Procter & Gamble to: 1. establish appreciation of industrial perspectives of biofilm; 2. develop industrial links with P&G; 3. identify key parameters that manage and engineer biofilms on complex substrates. During the three months placement period, Maria plans to systematically investigate and measure microbial adhesion to model soils and the mechanical properties of the biofilm/soil complex consequently formed. The scientific nature of the proposal is aligned with at least two areas outlined in the ISCF: accelerating detection of disease, and healthy ageing. Biofilms represent a major concern in industry and hospital healthcare settings where they cause severe structural and health problems (Jose Luis Del Pozo 2017; Gibson et al. 1997). Nowadays, the majority of efforts to treat biofilms are based on antimicrobial agents, which has led to one of the biggest issue in the world that is the bacteria and microorganisms antimicrobial resistance (AMR). The decrease of the effectiveness of these agents poses a serious concern and new ways for tackling biofilms without using antimicrobials are needed. The quantification of adhesion and cohesion forces is crucial in understanding, predicting and modelling biofilm development and removal. The primary objective for the placement is to identify the models and characterize the system as a function of the environment, such as pH, Relative Humidity, temperature, ionic strength, and time. We wish to use the opportunity to exchange both personnel and knowledge between academic (UoB) and industrial sectors (P&G). The placement holder will be exposed to a modern cooperate training package such as management skills, technical skills such as bacteria growth and monitoring for chemical industry.
Collaborator Contribution It is anticipated that the outcomes of the planned exchange include the following: 1. New skills: to be transferred between the University of Birmingham to P&G. Maria will use her expertise in microbiology to analyse the presence of biofilms on substrates that are of interest to both industrial and household related applications. In return, Maria will have the opportunity to be trained on a variety of industrial protocols that are not available under an academic research settings. 2. Personal development: Maria will establish in-depth appreciation of industrial perspective on engineering and managing biofilm. Furthermore, she will develop connections with colleagues at P&G, which is tremendously invaluable to an early career researcher. Furthermore, Maria will be offered to attend a number of bespoke training courses by P&G to develop her transferrable skills such as Project Management. 3. New knowledge: concerning the presence and mechanical integrity of biofilms will be generated, which bears fundamental importance to both academic research and industrial impact. This links the past work over different length scales (Goode 2013, Pen 2011), alongside the industrial R&D work. 4. Immediate collaboration: upon success of the placement, whereby key parameters that influence the mechanical properties of biofilm are identified, P&G will commit a further £60k to systematically expand the investigation, as indicated in the supporting letter. This would also strengthen the connection between Maria and colleagues at P&G developed through the placement. 5. Future partnership: University of Birmingham has a strategic partnership with P&G, for the past two decades, with a focus on the Formulation Engineering related work. The proposed work is closely related to the development of new formulated products or processes, and opens new avenues for future collaboration. 6. Societal impact: The learning outcome will help to design new strategies in addressing biofilm related issues in household and healthcare environment. Its impact to our society will be amplified and implemented through large organisation such as P&G who has an established and closed loop in transferring knowledge to real time. We will also engage with other potential partners through the National Biofilm Innovation Centre, to not only disseminate the findings, but to prompt the protocols and techniques developed.
Impact Together with the industrial partners, Dr Masoura identified the skin microbes that are of interest to the particular end applications, and developed the corresponding biofilms on fabrics, which provided invaluable insight to the company in understanding the influence of microbiological activities on the development of fabric care products. A key outcome of the project was to identify the factor(s) that control the adhesion and cohesion of such biofilms - this could be used for the development of new technologies in preventing and removing biofilms from fabrics. Our industrial partner, P&G, was delighted by the initial results generated by Dr Masoura and committed a follow-on fund of £60k to support Maria as a Research Fellow at the University of Birmingham continuing her investigation with a systematic manner. No other support is required from the NBIC for this project. Dr Masoura had subsequently developed her connection with another SME using natural materials for food packaging, and plans to submit a research proposal in the upcoming round of funding call.
Start Year 2020
 
Description NBIC FTMA Placement P_19_2_44 Mechanical properties of biofilm on complex substrate (Zhenyu Zhang) 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of this project is to place Maria Masoura, a PhD student with microbiology background, in a world-leading chemical company, Procter & Gamble to: 1. establish appreciation of industrial perspectives of biofilm; 2. develop industrial links with P&G; 3. identify key parameters that manage and engineer biofilms on complex substrates. During the three months placement period, Maria plans to systematically investigate and measure microbial adhesion to model soils and the mechanical properties of the biofilm/soil complex consequently formed. The scientific nature of the proposal is aligned with at least two areas outlined in the ISCF: accelerating detection of disease, and healthy ageing. Biofilms represent a major concern in industry and hospital healthcare settings where they cause severe structural and health problems (Jose Luis Del Pozo 2017; Gibson et al. 1997). Nowadays, the majority of efforts to treat biofilms are based on antimicrobial agents, which has led to one of the biggest issue in the world that is the bacteria and microorganisms antimicrobial resistance (AMR). The decrease of the effectiveness of these agents poses a serious concern and new ways for tackling biofilms without using antimicrobials are needed. The quantification of adhesion and cohesion forces is crucial in understanding, predicting and modelling biofilm development and removal. The primary objective for the placement is to identify the models and characterize the system as a function of the environment, such as pH, Relative Humidity, temperature, ionic strength, and time. We wish to use the opportunity to exchange both personnel and knowledge between academic (UoB) and industrial sectors (P&G). The placement holder will be exposed to a modern cooperate training package such as management skills, technical skills such as bacteria growth and monitoring for chemical industry.
Collaborator Contribution It is anticipated that the outcomes of the planned exchange include the following: 1. New skills: to be transferred between the University of Birmingham to P&G. Maria will use her expertise in microbiology to analyse the presence of biofilms on substrates that are of interest to both industrial and household related applications. In return, Maria will have the opportunity to be trained on a variety of industrial protocols that are not available under an academic research settings. 2. Personal development: Maria will establish in-depth appreciation of industrial perspective on engineering and managing biofilm. Furthermore, she will develop connections with colleagues at P&G, which is tremendously invaluable to an early career researcher. Furthermore, Maria will be offered to attend a number of bespoke training courses by P&G to develop her transferrable skills such as Project Management. 3. New knowledge: concerning the presence and mechanical integrity of biofilms will be generated, which bears fundamental importance to both academic research and industrial impact. This links the past work over different length scales (Goode 2013, Pen 2011), alongside the industrial R&D work. 4. Immediate collaboration: upon success of the placement, whereby key parameters that influence the mechanical properties of biofilm are identified, P&G will commit a further £60k to systematically expand the investigation, as indicated in the supporting letter. This would also strengthen the connection between Maria and colleagues at P&G developed through the placement. 5. Future partnership: University of Birmingham has a strategic partnership with P&G, for the past two decades, with a focus on the Formulation Engineering related work. The proposed work is closely related to the development of new formulated products or processes, and opens new avenues for future collaboration. 6. Societal impact: The learning outcome will help to design new strategies in addressing biofilm related issues in household and healthcare environment. Its impact to our society will be amplified and implemented through large organisation such as P&G who has an established and closed loop in transferring knowledge to real time. We will also engage with other potential partners through the National Biofilm Innovation Centre, to not only disseminate the findings, but to prompt the protocols and techniques developed.
Impact Together with the industrial partners, Dr Masoura identified the skin microbes that are of interest to the particular end applications, and developed the corresponding biofilms on fabrics, which provided invaluable insight to the company in understanding the influence of microbiological activities on the development of fabric care products. A key outcome of the project was to identify the factor(s) that control the adhesion and cohesion of such biofilms - this could be used for the development of new technologies in preventing and removing biofilms from fabrics. Our industrial partner, P&G, was delighted by the initial results generated by Dr Masoura and committed a follow-on fund of £60k to support Maria as a Research Fellow at the University of Birmingham continuing her investigation with a systematic manner. No other support is required from the NBIC for this project. Dr Masoura had subsequently developed her connection with another SME using natural materials for food packaging, and plans to submit a research proposal in the upcoming round of funding call.
Start Year 2020
 
Description NBIC FTMA Placement P_19_2_47 Developing Light Sheet Imaging to Detect and Monitor Biofilm Growth (Campbell Gourlay) 
Organisation CAIRN Research Ltd
Country United Kingdom 
Sector Private 
PI Contribution The overarching aim is to establish light sheet microscopy as a powerful tool that can be used to detect and monitor the formation of biofilms. To date such technology, which can image large surface areas in high resolution rapidly and with low phototoxicity has not been implemented to monitor and detect biofilm growth. The student will receive training in the use of two complementary light-sheet systems produced by Cairn Scientific. Training will take place within their scientific R & D labs in Faversham, Kent, with additional provided by Dr. Laissue (Essex). Both Cairn and Dr. Laissue have significant expertise in the design and implementation of light microscopy solutions. The student will be trained to use two light sheet instruments, an L-SPI for large sample imaging, and a MizarTILT system for high-resolution imaging. Both systems cause very low phototoxicity and can be used for non-invasive, long-term time-lapse fluorescence microscopy. The student will explore their evident potential for the use for detection and monitoring of biofilm growth within industrial settings that are highly relevant to the BBSRC Industry Strategy Challenges a) acceleration of detection of disease and b) precision agriculture. The first aim will be to monitor the development of algal biofilms on plastic tubing used to deliver nutrition within controlled growth precision agricultural facilities. In this case it will be of interest to monitor large areas of tubing at intermediate, cellular resolution to help detect early biofilm formation and to examine the effects of decontamination processes. The second aim will be to examine more complex biofilms at high resolution, revealing subcellular details to help dissect the composition of complex biofilm formation in real time. Such experiments will allow researchers to determine how multi-species biofilms assemble in real time, opening the door to new research-driven approaches to early disease detection and treatment.
Collaborator Contribution The research aims to extend the use of cutting edge microscopy technology into a new field of research that has direct relevance to the BBSRC Industrial Strategy Challenges. Main outputs will arise from the capture of the first comprehensive light sheet microscopy live cell imaging data of algal, bacterial and fungal biofilms developing on industrially relevant materials at high resolution. The data will validate the use of light sheet microscopy for biofilm detection. It will also show that high resolution live cell imaging data can be rapidly acquired over large surface areas, which lends the technique to rapid monitoring of biofilm formation in a variety of automated industrial settings, such as in precision agriculture feeding assemblies that are prone to contamination. The project will lead to the production of protocols that can be used to image biofilms for extended periods of time with limited photo-damage that will contribute to many future publications. We anticipate that the success of the project will lead to further collaborative work between the applicants, Cairn Scientific and a customer base with interests in using rapid cost effective imaging to monitor biofilm contamination or the effectiveness of anti-fouling treatments. Examples of such applications lie within the "smart agriculture" sector where constant monitoring systems play an important role in plant pathogen control or on the surfaces of medical equipment such as IV lines or catheter tubing. A significant output will be the training of the researcher to use cutting edge technology within an industrial R and D environment. The project offers an exciting opportunity for the student to gain experience not only in the development and application of a cutting edge microscopy technique, but in product development and marketing. Experience and results gained from developing new light sheet biofilm detection applications, and results obtained with them, will feed directly into the further collaborative research and research-led teaching done by the investigators at the Universities of Kent and Essex. The instruments and techniques will also be applied within future practical courses run by Dr. Laissue (e.g. NERC course for environmental imaging and joint imaging courses being developed by the Universities of Kent and Essex).
Impact The student gained experience using two light sheet instruments, an L-SPI for large sample imaging, and a MizarTILT system for high-resolution imaging. Use of both systems allowed long term imaging of biofilms and experiments focussed on optomising experimental conditions to reduce photoxicity using mitochondrial fragmentation as a sensitive marker. While the student gained experience working within an industrial setting and in new technology the company also gained new data that can be used to develop new protocols for their instruments. Certain limitations were encountered with the Cairn light sheet instruments that led to a follow on application for an FTMA fellowship within a second imaging company. This application was successful. The company, 3i, has agreed to the student (now a postdoc) to undertake studies within their facility to introduce AI software approaches in combination with their innovative light sheet instruments. It is hoped these experiments will yield unprecedented images of growing fungal biofilms under negligible levels of photoxicity.
Start Year 2020
 
Description NBIC FTMA Placement P_19_2_47 Developing Light Sheet Imaging to Detect and Monitor Biofilm Growth (Campbell Gourlay) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overarching aim is to establish light sheet microscopy as a powerful tool that can be used to detect and monitor the formation of biofilms. To date such technology, which can image large surface areas in high resolution rapidly and with low phototoxicity has not been implemented to monitor and detect biofilm growth. The student will receive training in the use of two complementary light-sheet systems produced by Cairn Scientific. Training will take place within their scientific R & D labs in Faversham, Kent, with additional provided by Dr. Laissue (Essex). Both Cairn and Dr. Laissue have significant expertise in the design and implementation of light microscopy solutions. The student will be trained to use two light sheet instruments, an L-SPI for large sample imaging, and a MizarTILT system for high-resolution imaging. Both systems cause very low phototoxicity and can be used for non-invasive, long-term time-lapse fluorescence microscopy. The student will explore their evident potential for the use for detection and monitoring of biofilm growth within industrial settings that are highly relevant to the BBSRC Industry Strategy Challenges a) acceleration of detection of disease and b) precision agriculture. The first aim will be to monitor the development of algal biofilms on plastic tubing used to deliver nutrition within controlled growth precision agricultural facilities. In this case it will be of interest to monitor large areas of tubing at intermediate, cellular resolution to help detect early biofilm formation and to examine the effects of decontamination processes. The second aim will be to examine more complex biofilms at high resolution, revealing subcellular details to help dissect the composition of complex biofilm formation in real time. Such experiments will allow researchers to determine how multi-species biofilms assemble in real time, opening the door to new research-driven approaches to early disease detection and treatment.
Collaborator Contribution The research aims to extend the use of cutting edge microscopy technology into a new field of research that has direct relevance to the BBSRC Industrial Strategy Challenges. Main outputs will arise from the capture of the first comprehensive light sheet microscopy live cell imaging data of algal, bacterial and fungal biofilms developing on industrially relevant materials at high resolution. The data will validate the use of light sheet microscopy for biofilm detection. It will also show that high resolution live cell imaging data can be rapidly acquired over large surface areas, which lends the technique to rapid monitoring of biofilm formation in a variety of automated industrial settings, such as in precision agriculture feeding assemblies that are prone to contamination. The project will lead to the production of protocols that can be used to image biofilms for extended periods of time with limited photo-damage that will contribute to many future publications. We anticipate that the success of the project will lead to further collaborative work between the applicants, Cairn Scientific and a customer base with interests in using rapid cost effective imaging to monitor biofilm contamination or the effectiveness of anti-fouling treatments. Examples of such applications lie within the "smart agriculture" sector where constant monitoring systems play an important role in plant pathogen control or on the surfaces of medical equipment such as IV lines or catheter tubing. A significant output will be the training of the researcher to use cutting edge technology within an industrial R and D environment. The project offers an exciting opportunity for the student to gain experience not only in the development and application of a cutting edge microscopy technique, but in product development and marketing. Experience and results gained from developing new light sheet biofilm detection applications, and results obtained with them, will feed directly into the further collaborative research and research-led teaching done by the investigators at the Universities of Kent and Essex. The instruments and techniques will also be applied within future practical courses run by Dr. Laissue (e.g. NERC course for environmental imaging and joint imaging courses being developed by the Universities of Kent and Essex).
Impact The student gained experience using two light sheet instruments, an L-SPI for large sample imaging, and a MizarTILT system for high-resolution imaging. Use of both systems allowed long term imaging of biofilms and experiments focussed on optomising experimental conditions to reduce photoxicity using mitochondrial fragmentation as a sensitive marker. While the student gained experience working within an industrial setting and in new technology the company also gained new data that can be used to develop new protocols for their instruments. Certain limitations were encountered with the Cairn light sheet instruments that led to a follow on application for an FTMA fellowship within a second imaging company. This application was successful. The company, 3i, has agreed to the student (now a postdoc) to undertake studies within their facility to introduce AI software approaches in combination with their innovative light sheet instruments. It is hoped these experiments will yield unprecedented images of growing fungal biofilms under negligible levels of photoxicity.
Start Year 2020
 
Description NBIC FTMA Placement P_19_2_47 Developing Light Sheet Imaging to Detect and Monitor Biofilm Growth (Campbell Gourlay) 
Organisation University of Kent
Country United Kingdom 
Sector Academic/University 
PI Contribution The overarching aim is to establish light sheet microscopy as a powerful tool that can be used to detect and monitor the formation of biofilms. To date such technology, which can image large surface areas in high resolution rapidly and with low phototoxicity has not been implemented to monitor and detect biofilm growth. The student will receive training in the use of two complementary light-sheet systems produced by Cairn Scientific. Training will take place within their scientific R & D labs in Faversham, Kent, with additional provided by Dr. Laissue (Essex). Both Cairn and Dr. Laissue have significant expertise in the design and implementation of light microscopy solutions. The student will be trained to use two light sheet instruments, an L-SPI for large sample imaging, and a MizarTILT system for high-resolution imaging. Both systems cause very low phototoxicity and can be used for non-invasive, long-term time-lapse fluorescence microscopy. The student will explore their evident potential for the use for detection and monitoring of biofilm growth within industrial settings that are highly relevant to the BBSRC Industry Strategy Challenges a) acceleration of detection of disease and b) precision agriculture. The first aim will be to monitor the development of algal biofilms on plastic tubing used to deliver nutrition within controlled growth precision agricultural facilities. In this case it will be of interest to monitor large areas of tubing at intermediate, cellular resolution to help detect early biofilm formation and to examine the effects of decontamination processes. The second aim will be to examine more complex biofilms at high resolution, revealing subcellular details to help dissect the composition of complex biofilm formation in real time. Such experiments will allow researchers to determine how multi-species biofilms assemble in real time, opening the door to new research-driven approaches to early disease detection and treatment.
Collaborator Contribution The research aims to extend the use of cutting edge microscopy technology into a new field of research that has direct relevance to the BBSRC Industrial Strategy Challenges. Main outputs will arise from the capture of the first comprehensive light sheet microscopy live cell imaging data of algal, bacterial and fungal biofilms developing on industrially relevant materials at high resolution. The data will validate the use of light sheet microscopy for biofilm detection. It will also show that high resolution live cell imaging data can be rapidly acquired over large surface areas, which lends the technique to rapid monitoring of biofilm formation in a variety of automated industrial settings, such as in precision agriculture feeding assemblies that are prone to contamination. The project will lead to the production of protocols that can be used to image biofilms for extended periods of time with limited photo-damage that will contribute to many future publications. We anticipate that the success of the project will lead to further collaborative work between the applicants, Cairn Scientific and a customer base with interests in using rapid cost effective imaging to monitor biofilm contamination or the effectiveness of anti-fouling treatments. Examples of such applications lie within the "smart agriculture" sector where constant monitoring systems play an important role in plant pathogen control or on the surfaces of medical equipment such as IV lines or catheter tubing. A significant output will be the training of the researcher to use cutting edge technology within an industrial R and D environment. The project offers an exciting opportunity for the student to gain experience not only in the development and application of a cutting edge microscopy technique, but in product development and marketing. Experience and results gained from developing new light sheet biofilm detection applications, and results obtained with them, will feed directly into the further collaborative research and research-led teaching done by the investigators at the Universities of Kent and Essex. The instruments and techniques will also be applied within future practical courses run by Dr. Laissue (e.g. NERC course for environmental imaging and joint imaging courses being developed by the Universities of Kent and Essex).
Impact The student gained experience using two light sheet instruments, an L-SPI for large sample imaging, and a MizarTILT system for high-resolution imaging. Use of both systems allowed long term imaging of biofilms and experiments focussed on optomising experimental conditions to reduce photoxicity using mitochondrial fragmentation as a sensitive marker. While the student gained experience working within an industrial setting and in new technology the company also gained new data that can be used to develop new protocols for their instruments. Certain limitations were encountered with the Cairn light sheet instruments that led to a follow on application for an FTMA fellowship within a second imaging company. This application was successful. The company, 3i, has agreed to the student (now a postdoc) to undertake studies within their facility to introduce AI software approaches in combination with their innovative light sheet instruments. It is hoped these experiments will yield unprecedented images of growing fungal biofilms under negligible levels of photoxicity.
Start Year 2020
 
Description NBIC FTMA Placements P_19_01 and P_19_01_2 16S Metagenomics product development (Sandra Wilks) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution I will be spending 3 months working at YouSeq Ltd. YouSeq is a new company that develops Next Generation Sequencing (NGS) kits. YouSeq was founded by the team behind PrimerDesign Ltd (a successful qPCR product business spun out of the University of Southampton), that I have purchased product from and was previously successful in winning a sponsorship award from. Youseq have a new 16S metagenomics product with the power to identify (to a species level) complex bacteria populations from environmental and clinical samples. YouSeq are also developing a novel sampling tool for quick and easy sampling and simultaneous DNA extraction from environmental bacteria (including biofilms). I will be working to develop this new product further through a programme of laboratory work, field testing and market research. I will use my existing knowledge of 16S bacterial metagenomics alongside my in depth understanding of biofilm formation to help advise the team in the development of the product further. I will test the product extensively with real world samples to help validate the product and identify areas for further improvement. I will also spend time talking to clinicians and researchers to understand in more detail the challenges and pain points that they face in order to understand best how to develop the product for maximum societal impact. The secondment will allow me to experience the fast-paced commercial start-up environment and apply my knowledge in a tangible and very direct manner. I will have the opportunity to learn new commercial skills in product development, market research and commercialisation of scientific knowledge. All of which, I believe, offers me a rich and exciting opportunity to experience the commercial world of Science at this pivotal moment in my personal and professional development.
Collaborator Contribution The 16S Metagenomics kit that I will be working to develop will have enormous societal and economic benefit. Microbial infection of environmental surfaces in hospitals has a massive impact on patient outcome and is known to be a reservoir for clinical infection. Accurate, cost effect, routine identification of complex bacteria populations from environmental samples will be a powerful tool in the fight against hospital acquired infection. As well as improved patient outcomes, this has the potential to provide enormous cost savings by preventing infection before it occurs. The key measurable outcome from my visit will be the commercial launch of the 16S metagenomics product of which I will be an integral part of the launch team. The product is in beta testing and requires some final development and a body of scientific and market research data behind it. I will produce/collate this data in to a final report. This data will be used to make any final improvements to the product ahead of launch. I hope to be able to use my own network of clinical contacts at Southampton General Hospital to perform a small-scale collaboration/testing programme during the secondment. I will also write a "white paper" centred around the use of the 16S Metagenomics kit for marketing and communication purposes. My current academic department also have a requirement for more 16S metagenomic testing in future so there is potential for further collaboration between YouSeq and the University of Southampton beyond the duration of my secondment. Further developments: After completing his project with YouSeq in early January 2019, Dr Winnard successfully found employment with Novagene, a global NGS service provider. YouSeq are currently undertaking a marketing drive for the product with great hopes for significant commercial success that will bring further income and employment to the local community.
Impact The outcome has been a successful product launch. Chris has been successful in taking the prototype product, identifying final issues and implement improvements to make the kit robust for commercial use. He has performed detailed studies on sensitivity and specificity and produced good quality data to satisfy the company's quality standards as well as for use in marketing purposes. Chris has also been involved in various marketing related tasks associated with product launch including developing the product instructions-for-use further as well as website and printed marketing content. Chris has also been involved in the beta version of product launch with trials of the kit occurring in the US, South Africa, Portugal and the UK. Chris also took part in commercial and technical discussions with the company's first significant customer for the product signing an agreement with YouSeq this week.
Start Year 2019
 
Description NBIC FTMA Placements P_19_01 and P_19_01_2 16S Metagenomics product development (Sandra Wilks) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution I will be spending 3 months working at YouSeq Ltd. YouSeq is a new company that develops Next Generation Sequencing (NGS) kits. YouSeq was founded by the team behind PrimerDesign Ltd (a successful qPCR product business spun out of the University of Southampton), that I have purchased product from and was previously successful in winning a sponsorship award from. Youseq have a new 16S metagenomics product with the power to identify (to a species level) complex bacteria populations from environmental and clinical samples. YouSeq are also developing a novel sampling tool for quick and easy sampling and simultaneous DNA extraction from environmental bacteria (including biofilms). I will be working to develop this new product further through a programme of laboratory work, field testing and market research. I will use my existing knowledge of 16S bacterial metagenomics alongside my in depth understanding of biofilm formation to help advise the team in the development of the product further. I will test the product extensively with real world samples to help validate the product and identify areas for further improvement. I will also spend time talking to clinicians and researchers to understand in more detail the challenges and pain points that they face in order to understand best how to develop the product for maximum societal impact. The secondment will allow me to experience the fast-paced commercial start-up environment and apply my knowledge in a tangible and very direct manner. I will have the opportunity to learn new commercial skills in product development, market research and commercialisation of scientific knowledge. All of which, I believe, offers me a rich and exciting opportunity to experience the commercial world of Science at this pivotal moment in my personal and professional development.
Collaborator Contribution The 16S Metagenomics kit that I will be working to develop will have enormous societal and economic benefit. Microbial infection of environmental surfaces in hospitals has a massive impact on patient outcome and is known to be a reservoir for clinical infection. Accurate, cost effect, routine identification of complex bacteria populations from environmental samples will be a powerful tool in the fight against hospital acquired infection. As well as improved patient outcomes, this has the potential to provide enormous cost savings by preventing infection before it occurs. The key measurable outcome from my visit will be the commercial launch of the 16S metagenomics product of which I will be an integral part of the launch team. The product is in beta testing and requires some final development and a body of scientific and market research data behind it. I will produce/collate this data in to a final report. This data will be used to make any final improvements to the product ahead of launch. I hope to be able to use my own network of clinical contacts at Southampton General Hospital to perform a small-scale collaboration/testing programme during the secondment. I will also write a "white paper" centred around the use of the 16S Metagenomics kit for marketing and communication purposes. My current academic department also have a requirement for more 16S metagenomic testing in future so there is potential for further collaboration between YouSeq and the University of Southampton beyond the duration of my secondment. Further developments: After completing his project with YouSeq in early January 2019, Dr Winnard successfully found employment with Novagene, a global NGS service provider. YouSeq are currently undertaking a marketing drive for the product with great hopes for significant commercial success that will bring further income and employment to the local community.
Impact The outcome has been a successful product launch. Chris has been successful in taking the prototype product, identifying final issues and implement improvements to make the kit robust for commercial use. He has performed detailed studies on sensitivity and specificity and produced good quality data to satisfy the company's quality standards as well as for use in marketing purposes. Chris has also been involved in various marketing related tasks associated with product launch including developing the product instructions-for-use further as well as website and printed marketing content. Chris has also been involved in the beta version of product launch with trials of the kit occurring in the US, South Africa, Portugal and the UK. Chris also took part in commercial and technical discussions with the company's first significant customer for the product signing an agreement with YouSeq this week.
Start Year 2019
 
Description NBIC FTMA Placements P_19_01 and P_19_01_2 16S Metagenomics product development (Sandra Wilks) 
Organisation YouSeq Ltd
Country United Kingdom 
Sector Private 
PI Contribution I will be spending 3 months working at YouSeq Ltd. YouSeq is a new company that develops Next Generation Sequencing (NGS) kits. YouSeq was founded by the team behind PrimerDesign Ltd (a successful qPCR product business spun out of the University of Southampton), that I have purchased product from and was previously successful in winning a sponsorship award from. Youseq have a new 16S metagenomics product with the power to identify (to a species level) complex bacteria populations from environmental and clinical samples. YouSeq are also developing a novel sampling tool for quick and easy sampling and simultaneous DNA extraction from environmental bacteria (including biofilms). I will be working to develop this new product further through a programme of laboratory work, field testing and market research. I will use my existing knowledge of 16S bacterial metagenomics alongside my in depth understanding of biofilm formation to help advise the team in the development of the product further. I will test the product extensively with real world samples to help validate the product and identify areas for further improvement. I will also spend time talking to clinicians and researchers to understand in more detail the challenges and pain points that they face in order to understand best how to develop the product for maximum societal impact. The secondment will allow me to experience the fast-paced commercial start-up environment and apply my knowledge in a tangible and very direct manner. I will have the opportunity to learn new commercial skills in product development, market research and commercialisation of scientific knowledge. All of which, I believe, offers me a rich and exciting opportunity to experience the commercial world of Science at this pivotal moment in my personal and professional development.
Collaborator Contribution The 16S Metagenomics kit that I will be working to develop will have enormous societal and economic benefit. Microbial infection of environmental surfaces in hospitals has a massive impact on patient outcome and is known to be a reservoir for clinical infection. Accurate, cost effect, routine identification of complex bacteria populations from environmental samples will be a powerful tool in the fight against hospital acquired infection. As well as improved patient outcomes, this has the potential to provide enormous cost savings by preventing infection before it occurs. The key measurable outcome from my visit will be the commercial launch of the 16S metagenomics product of which I will be an integral part of the launch team. The product is in beta testing and requires some final development and a body of scientific and market research data behind it. I will produce/collate this data in to a final report. This data will be used to make any final improvements to the product ahead of launch. I hope to be able to use my own network of clinical contacts at Southampton General Hospital to perform a small-scale collaboration/testing programme during the secondment. I will also write a "white paper" centred around the use of the 16S Metagenomics kit for marketing and communication purposes. My current academic department also have a requirement for more 16S metagenomic testing in future so there is potential for further collaboration between YouSeq and the University of Southampton beyond the duration of my secondment. Further developments: After completing his project with YouSeq in early January 2019, Dr Winnard successfully found employment with Novagene, a global NGS service provider. YouSeq are currently undertaking a marketing drive for the product with great hopes for significant commercial success that will bring further income and employment to the local community.
Impact The outcome has been a successful product launch. Chris has been successful in taking the prototype product, identifying final issues and implement improvements to make the kit robust for commercial use. He has performed detailed studies on sensitivity and specificity and produced good quality data to satisfy the company's quality standards as well as for use in marketing purposes. Chris has also been involved in various marketing related tasks associated with product launch including developing the product instructions-for-use further as well as website and printed marketing content. Chris has also been involved in the beta version of product launch with trials of the kit occurring in the US, South Africa, Portugal and the UK. Chris also took part in commercial and technical discussions with the company's first significant customer for the product signing an agreement with YouSeq this week.
Start Year 2019
 
Description NBIC FTMA3_21_003 Understanding the antimicrobial efficacy of copper coatings on dry surface biofilms (Sandra Wilks) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution In this placement, the antimicrobial efficacy of the Copper Cover novel coatings on polymicrobial dry biofilms, including antiviral activity, will be investigated. The Copper Cover coating is intended for use on high touchpoint areas such as door handles, push plates and lift buttons - all of which are at risk of continuous contamination and could be impacted by dry biofilm development. The coatings show strong antimicrobial activity against both single species of bacterial and viral pathogens including SARS-CoV-2 but there have been no studies looking in detail at the action of antimicrobial copper against mixed, dry biofilms. In light of the pandemic and to improve infection prevention and control strategies, the efficacy on such complex communities needs to be understood. The study will test coated coupons against controls such as stainless steel, using simple batch testing and a drip flow reactor to generate dry surface biofilms against key bacterial pathogens such as E. coli, Staphylococcus aureus, Pseudomonas aeruginosa and also allow incorporation of viruses - using a surrogate for SARS-CoV-2. The viability of these will be assessed using culture and imaging for bacterial pathogens, and a cell culture assay for the virus. This work will provide experience on standard testing as required for product development and evaluation. Throughout the researcher will be working alongside Copper Cover engineers and company representatives, who will provide commercial experience and insight into product design and improvement, this will include knowledge on market analysis and understanding on the challenges encountered in different markets; NHS, food production and other regulated industries.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact None yet.
Start Year 2021
 
Description NBIC FTMA3_21_003 Understanding the antimicrobial efficacy of copper coatings on dry surface biofilms (Sandra Wilks) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution In this placement, the antimicrobial efficacy of the Copper Cover novel coatings on polymicrobial dry biofilms, including antiviral activity, will be investigated. The Copper Cover coating is intended for use on high touchpoint areas such as door handles, push plates and lift buttons - all of which are at risk of continuous contamination and could be impacted by dry biofilm development. The coatings show strong antimicrobial activity against both single species of bacterial and viral pathogens including SARS-CoV-2 but there have been no studies looking in detail at the action of antimicrobial copper against mixed, dry biofilms. In light of the pandemic and to improve infection prevention and control strategies, the efficacy on such complex communities needs to be understood. The study will test coated coupons against controls such as stainless steel, using simple batch testing and a drip flow reactor to generate dry surface biofilms against key bacterial pathogens such as E. coli, Staphylococcus aureus, Pseudomonas aeruginosa and also allow incorporation of viruses - using a surrogate for SARS-CoV-2. The viability of these will be assessed using culture and imaging for bacterial pathogens, and a cell culture assay for the virus. This work will provide experience on standard testing as required for product development and evaluation. Throughout the researcher will be working alongside Copper Cover engineers and company representatives, who will provide commercial experience and insight into product design and improvement, this will include knowledge on market analysis and understanding on the challenges encountered in different markets; NHS, food production and other regulated industries.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact None yet.
Start Year 2021
 
Description NBIC FTMA3_21_004 Advanced imaging of biofilms formed by urinary tract infections: training and Nanocin technology evaluation (Isabelle Papandronicou) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Urinary tract infections (UTI) are one of the most prevalent infections in humans and account for a significant global healthcare and economic burden. This is particularly true within an ageing society and therefore this project aligns to the UKRI's Industry Strategy challenge funds ageing society challenge. 25-35% of women suffering from a UTI will fail standard antibiotic treatment protocols. This, in part, can be explained by the well documented ability for uropathogens to form biofilms within bladder cells and on the surface of urinary catheters. In these circumstances, antibiotics are unable to penetrate and kill offending microbes leading to recurrent infections, hospitalisation and potentially sepsis. More efficacious treatments are desperately needed. Therefore, Tecrea is interested in applications of its innovative technology in the area of UTI control. Aims: 1. Imaging of biofilms, through training from the UCL team, with a Leica SP8 deconvolution super-resolution laser scanning confocal microscope. Static (fixed) and live imaging will be performed over a series of hours under physiological conditions. 2. Evaluate the morphological effects of Tecrea's Nanocin technology on biofilms formed by UTI pathogens, using clinical isolated and established in vitro biofilm models. Training provided by UCL in morphometric analysis using super resolution 3D image analysis using Leica LASX, Image pro 10 3D and FIJI (Comstat2). 3. Further develop the SME-academic collaboration, building on past successful collaboration. 4. Expand and develop my skill set. Personal Development: Completing the secondment will allow me to learn a range of novel imaging techniques and in vitro models for the assessment of biofilm morphology. This will further develop my technical skill set which I can apply in my work at Tecrea. Collaborating with UCL, the NHS and BIIG will enable me to expand my collaboration network as well as observing research from lab bench into a clinical setting.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Overall, uropathogenic E. coli biofilm was successfully grown and stained in vitro and visualised by CLSM. NanocinTM treatment was evaluated by CLSM of uropathogenic E. coli biofilm which has not previously been studied before. Results and conclusions: • NanocinTM penetrated uropathogenic E. coli biofilm at concentrations above the MIC. • NanocinTM inhibited growth of uropathogenic E. coli. • Greater NanocinTM-FITC fluorescence was observed in the apical surface of the biofilm compared with the basal surface. The secondment has helped my personal development as a research scientist. I have learnt new transferable skills such as confocal microscopy, developed my microbiological skills further and established new connections with the bladder infection and immunity group (BIIG) at the NHS Royal Free Hospital. The secondment has benefitted Tecrea Ltd by providing funding to research the viability of its NanocinTM technology in UTI treatment. The BIIG group have also benefitted from the secondment through developing a better understanding of biofilm formation in UTI with the potential for a new treatment method with further research. Future work: The work will be submitted for abstract and presentation conference calls to allow presentation of the work to the wider community. The established collaboration between Tecrea Ltd and the BIIG group at the NHS Royal Free Hospital will continue. With the collaboration we aim to continue the in vitro research to gain further insight into the NanocinTM technologies ability to kill uropathogens (including in other species such as pseudomonas aeruginosa, proteus mirabilis and enterococcus spp.) as well as broaden our understanding of NanocinsTM mechanism of action. Further biofilm staining techniques will be utilized as well as minimum biofilm eradication concentrations calculated. Additional grant funding opportunities will be required to advance this work further which will be applied for by both parties in the collaboration.
Start Year 2021
 
Description NBIC FTMA3_21_004 Advanced imaging of biofilms formed by urinary tract infections: training and Nanocin technology evaluation (Isabelle Papandronicou) 
Organisation Tecrea Ltd
Country United Kingdom 
Sector Private 
PI Contribution Urinary tract infections (UTI) are one of the most prevalent infections in humans and account for a significant global healthcare and economic burden. This is particularly true within an ageing society and therefore this project aligns to the UKRI's Industry Strategy challenge funds ageing society challenge. 25-35% of women suffering from a UTI will fail standard antibiotic treatment protocols. This, in part, can be explained by the well documented ability for uropathogens to form biofilms within bladder cells and on the surface of urinary catheters. In these circumstances, antibiotics are unable to penetrate and kill offending microbes leading to recurrent infections, hospitalisation and potentially sepsis. More efficacious treatments are desperately needed. Therefore, Tecrea is interested in applications of its innovative technology in the area of UTI control. Aims: 1. Imaging of biofilms, through training from the UCL team, with a Leica SP8 deconvolution super-resolution laser scanning confocal microscope. Static (fixed) and live imaging will be performed over a series of hours under physiological conditions. 2. Evaluate the morphological effects of Tecrea's Nanocin technology on biofilms formed by UTI pathogens, using clinical isolated and established in vitro biofilm models. Training provided by UCL in morphometric analysis using super resolution 3D image analysis using Leica LASX, Image pro 10 3D and FIJI (Comstat2). 3. Further develop the SME-academic collaboration, building on past successful collaboration. 4. Expand and develop my skill set. Personal Development: Completing the secondment will allow me to learn a range of novel imaging techniques and in vitro models for the assessment of biofilm morphology. This will further develop my technical skill set which I can apply in my work at Tecrea. Collaborating with UCL, the NHS and BIIG will enable me to expand my collaboration network as well as observing research from lab bench into a clinical setting.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Overall, uropathogenic E. coli biofilm was successfully grown and stained in vitro and visualised by CLSM. NanocinTM treatment was evaluated by CLSM of uropathogenic E. coli biofilm which has not previously been studied before. Results and conclusions: • NanocinTM penetrated uropathogenic E. coli biofilm at concentrations above the MIC. • NanocinTM inhibited growth of uropathogenic E. coli. • Greater NanocinTM-FITC fluorescence was observed in the apical surface of the biofilm compared with the basal surface. The secondment has helped my personal development as a research scientist. I have learnt new transferable skills such as confocal microscopy, developed my microbiological skills further and established new connections with the bladder infection and immunity group (BIIG) at the NHS Royal Free Hospital. The secondment has benefitted Tecrea Ltd by providing funding to research the viability of its NanocinTM technology in UTI treatment. The BIIG group have also benefitted from the secondment through developing a better understanding of biofilm formation in UTI with the potential for a new treatment method with further research. Future work: The work will be submitted for abstract and presentation conference calls to allow presentation of the work to the wider community. The established collaboration between Tecrea Ltd and the BIIG group at the NHS Royal Free Hospital will continue. With the collaboration we aim to continue the in vitro research to gain further insight into the NanocinTM technologies ability to kill uropathogens (including in other species such as pseudomonas aeruginosa, proteus mirabilis and enterococcus spp.) as well as broaden our understanding of NanocinsTM mechanism of action. Further biofilm staining techniques will be utilized as well as minimum biofilm eradication concentrations calculated. Additional grant funding opportunities will be required to advance this work further which will be applied for by both parties in the collaboration.
Start Year 2021
 
Description NBIC FTMA3_21_004 Advanced imaging of biofilms formed by urinary tract infections: training and Nanocin technology evaluation (Isabelle Papandronicou) 
Organisation University College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Urinary tract infections (UTI) are one of the most prevalent infections in humans and account for a significant global healthcare and economic burden. This is particularly true within an ageing society and therefore this project aligns to the UKRI's Industry Strategy challenge funds ageing society challenge. 25-35% of women suffering from a UTI will fail standard antibiotic treatment protocols. This, in part, can be explained by the well documented ability for uropathogens to form biofilms within bladder cells and on the surface of urinary catheters. In these circumstances, antibiotics are unable to penetrate and kill offending microbes leading to recurrent infections, hospitalisation and potentially sepsis. More efficacious treatments are desperately needed. Therefore, Tecrea is interested in applications of its innovative technology in the area of UTI control. Aims: 1. Imaging of biofilms, through training from the UCL team, with a Leica SP8 deconvolution super-resolution laser scanning confocal microscope. Static (fixed) and live imaging will be performed over a series of hours under physiological conditions. 2. Evaluate the morphological effects of Tecrea's Nanocin technology on biofilms formed by UTI pathogens, using clinical isolated and established in vitro biofilm models. Training provided by UCL in morphometric analysis using super resolution 3D image analysis using Leica LASX, Image pro 10 3D and FIJI (Comstat2). 3. Further develop the SME-academic collaboration, building on past successful collaboration. 4. Expand and develop my skill set. Personal Development: Completing the secondment will allow me to learn a range of novel imaging techniques and in vitro models for the assessment of biofilm morphology. This will further develop my technical skill set which I can apply in my work at Tecrea. Collaborating with UCL, the NHS and BIIG will enable me to expand my collaboration network as well as observing research from lab bench into a clinical setting.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Overall, uropathogenic E. coli biofilm was successfully grown and stained in vitro and visualised by CLSM. NanocinTM treatment was evaluated by CLSM of uropathogenic E. coli biofilm which has not previously been studied before. Results and conclusions: • NanocinTM penetrated uropathogenic E. coli biofilm at concentrations above the MIC. • NanocinTM inhibited growth of uropathogenic E. coli. • Greater NanocinTM-FITC fluorescence was observed in the apical surface of the biofilm compared with the basal surface. The secondment has helped my personal development as a research scientist. I have learnt new transferable skills such as confocal microscopy, developed my microbiological skills further and established new connections with the bladder infection and immunity group (BIIG) at the NHS Royal Free Hospital. The secondment has benefitted Tecrea Ltd by providing funding to research the viability of its NanocinTM technology in UTI treatment. The BIIG group have also benefitted from the secondment through developing a better understanding of biofilm formation in UTI with the potential for a new treatment method with further research. Future work: The work will be submitted for abstract and presentation conference calls to allow presentation of the work to the wider community. The established collaboration between Tecrea Ltd and the BIIG group at the NHS Royal Free Hospital will continue. With the collaboration we aim to continue the in vitro research to gain further insight into the NanocinTM technologies ability to kill uropathogens (including in other species such as pseudomonas aeruginosa, proteus mirabilis and enterococcus spp.) as well as broaden our understanding of NanocinsTM mechanism of action. Further biofilm staining techniques will be utilized as well as minimum biofilm eradication concentrations calculated. Additional grant funding opportunities will be required to advance this work further which will be applied for by both parties in the collaboration.
Start Year 2021
 
Description NBIC FTMA3_21_004 Advanced imaging of biofilms formed by urinary tract infections: training and Nanocin technology evaluation (Isabelle Papandronicou) 
Organisation Whittington Health NHS Trust
Country United Kingdom 
Sector Public 
PI Contribution Urinary tract infections (UTI) are one of the most prevalent infections in humans and account for a significant global healthcare and economic burden. This is particularly true within an ageing society and therefore this project aligns to the UKRI's Industry Strategy challenge funds ageing society challenge. 25-35% of women suffering from a UTI will fail standard antibiotic treatment protocols. This, in part, can be explained by the well documented ability for uropathogens to form biofilms within bladder cells and on the surface of urinary catheters. In these circumstances, antibiotics are unable to penetrate and kill offending microbes leading to recurrent infections, hospitalisation and potentially sepsis. More efficacious treatments are desperately needed. Therefore, Tecrea is interested in applications of its innovative technology in the area of UTI control. Aims: 1. Imaging of biofilms, through training from the UCL team, with a Leica SP8 deconvolution super-resolution laser scanning confocal microscope. Static (fixed) and live imaging will be performed over a series of hours under physiological conditions. 2. Evaluate the morphological effects of Tecrea's Nanocin technology on biofilms formed by UTI pathogens, using clinical isolated and established in vitro biofilm models. Training provided by UCL in morphometric analysis using super resolution 3D image analysis using Leica LASX, Image pro 10 3D and FIJI (Comstat2). 3. Further develop the SME-academic collaboration, building on past successful collaboration. 4. Expand and develop my skill set. Personal Development: Completing the secondment will allow me to learn a range of novel imaging techniques and in vitro models for the assessment of biofilm morphology. This will further develop my technical skill set which I can apply in my work at Tecrea. Collaborating with UCL, the NHS and BIIG will enable me to expand my collaboration network as well as observing research from lab bench into a clinical setting.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Overall, uropathogenic E. coli biofilm was successfully grown and stained in vitro and visualised by CLSM. NanocinTM treatment was evaluated by CLSM of uropathogenic E. coli biofilm which has not previously been studied before. Results and conclusions: • NanocinTM penetrated uropathogenic E. coli biofilm at concentrations above the MIC. • NanocinTM inhibited growth of uropathogenic E. coli. • Greater NanocinTM-FITC fluorescence was observed in the apical surface of the biofilm compared with the basal surface. The secondment has helped my personal development as a research scientist. I have learnt new transferable skills such as confocal microscopy, developed my microbiological skills further and established new connections with the bladder infection and immunity group (BIIG) at the NHS Royal Free Hospital. The secondment has benefitted Tecrea Ltd by providing funding to research the viability of its NanocinTM technology in UTI treatment. The BIIG group have also benefitted from the secondment through developing a better understanding of biofilm formation in UTI with the potential for a new treatment method with further research. Future work: The work will be submitted for abstract and presentation conference calls to allow presentation of the work to the wider community. The established collaboration between Tecrea Ltd and the BIIG group at the NHS Royal Free Hospital will continue. With the collaboration we aim to continue the in vitro research to gain further insight into the NanocinTM technologies ability to kill uropathogens (including in other species such as pseudomonas aeruginosa, proteus mirabilis and enterococcus spp.) as well as broaden our understanding of NanocinsTM mechanism of action. Further biofilm staining techniques will be utilized as well as minimum biofilm eradication concentrations calculated. Additional grant funding opportunities will be required to advance this work further which will be applied for by both parties in the collaboration.
Start Year 2021
 
Description NBIC FTMA3_21_005 Polymers for Disrupting Biofilms and Enhanced Treatment of Infection (Stephen Rimmer) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution The project involves scoping the possibilities around combining Bradford technologies with the current 5D pipeline. A number of hybrid technologies will be examined that combine polymers that respond to bacteria or fungi (or possibly also viruses) with other biofilm disrupting technologies (such as the use of EDTA). The Bradford expertise is also in hydrogel technologies and we will carry out preliminary scoping experiments on combining hydrogel carriers with the 5D pipeline technologies. Already the Bradford team have developed several devices that can be used to detect bacteria or fungi in skin, eyes, wounds or other tissues. However, progress to the market has been slow and another aspect of the programme will be to develop routes to market using the considerable experience of the 5D team in this area as we develop a range of hybrid technologies. A particular area that has been discussed between the two teams is around developing chip-based sensors for infection using fabrication expertise at 5D and smart polymer expertise from the Bradford team. This is a relatively new area for the Bradford team and we will aim to explore both practical exemplars and potential designs incorporating sensor chips into wound dressings. The project will be of great value to Prof. Rimmer in enabling an immersive research experience within the partner organisation that will underpin future substantial programmes. The project is central to the industrial strategy Grand Challenges in Ageing Society and AI and data. Treatment of infection becomes more difficult with age and non-healing wounds in the elderly (eg diabetic patents) can be difficult to treat. Smart treatments and enhanced wound dressings can be a key way of improving outcomes. Also, smart dressings incorporating chips that can provide real data on the state of wounds can facilitate an AI/data rich approach to wound care.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact The experiments have resulted in potentially a new class of materials that have also been shown to be non-immunogenic and non-cytotoxic, in vitro. The polymers maybe be commercially useful and the pyrrole carbodithioate polymers can already be produced in 0.5 kg quantities cost-effectively. They may provide a useful adjunct to already commercialised treatments. The production of QCMB responsive chips opens the way to produce biosensors and possible wearable wound dressings with embedded technology for indicating bacterial load. We hope to further develop these technologies via Innovate UK in the coming months. Rimmer was also trained in CDC technology and this will facilitate further collaboration with 5D. Next steps: Currently, we are investigating possible funding with Innovate UK and to support this the work is being written to for publication with the possibility to protect some aspects.
Start Year 2021
 
Description NBIC FTMA3_21_005 Polymers for Disrupting Biofilms and Enhanced Treatment of Infection (Stephen Rimmer) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The project involves scoping the possibilities around combining Bradford technologies with the current 5D pipeline. A number of hybrid technologies will be examined that combine polymers that respond to bacteria or fungi (or possibly also viruses) with other biofilm disrupting technologies (such as the use of EDTA). The Bradford expertise is also in hydrogel technologies and we will carry out preliminary scoping experiments on combining hydrogel carriers with the 5D pipeline technologies. Already the Bradford team have developed several devices that can be used to detect bacteria or fungi in skin, eyes, wounds or other tissues. However, progress to the market has been slow and another aspect of the programme will be to develop routes to market using the considerable experience of the 5D team in this area as we develop a range of hybrid technologies. A particular area that has been discussed between the two teams is around developing chip-based sensors for infection using fabrication expertise at 5D and smart polymer expertise from the Bradford team. This is a relatively new area for the Bradford team and we will aim to explore both practical exemplars and potential designs incorporating sensor chips into wound dressings. The project will be of great value to Prof. Rimmer in enabling an immersive research experience within the partner organisation that will underpin future substantial programmes. The project is central to the industrial strategy Grand Challenges in Ageing Society and AI and data. Treatment of infection becomes more difficult with age and non-healing wounds in the elderly (eg diabetic patents) can be difficult to treat. Smart treatments and enhanced wound dressings can be a key way of improving outcomes. Also, smart dressings incorporating chips that can provide real data on the state of wounds can facilitate an AI/data rich approach to wound care.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact The experiments have resulted in potentially a new class of materials that have also been shown to be non-immunogenic and non-cytotoxic, in vitro. The polymers maybe be commercially useful and the pyrrole carbodithioate polymers can already be produced in 0.5 kg quantities cost-effectively. They may provide a useful adjunct to already commercialised treatments. The production of QCMB responsive chips opens the way to produce biosensors and possible wearable wound dressings with embedded technology for indicating bacterial load. We hope to further develop these technologies via Innovate UK in the coming months. Rimmer was also trained in CDC technology and this will facilitate further collaboration with 5D. Next steps: Currently, we are investigating possible funding with Innovate UK and to support this the work is being written to for publication with the possibility to protect some aspects.
Start Year 2021
 
Description NBIC FTMA3_21_005 Polymers for Disrupting Biofilms and Enhanced Treatment of Infection (Stephen Rimmer) 
Organisation University of Bradford
Country United Kingdom 
Sector Academic/University 
PI Contribution The project involves scoping the possibilities around combining Bradford technologies with the current 5D pipeline. A number of hybrid technologies will be examined that combine polymers that respond to bacteria or fungi (or possibly also viruses) with other biofilm disrupting technologies (such as the use of EDTA). The Bradford expertise is also in hydrogel technologies and we will carry out preliminary scoping experiments on combining hydrogel carriers with the 5D pipeline technologies. Already the Bradford team have developed several devices that can be used to detect bacteria or fungi in skin, eyes, wounds or other tissues. However, progress to the market has been slow and another aspect of the programme will be to develop routes to market using the considerable experience of the 5D team in this area as we develop a range of hybrid technologies. A particular area that has been discussed between the two teams is around developing chip-based sensors for infection using fabrication expertise at 5D and smart polymer expertise from the Bradford team. This is a relatively new area for the Bradford team and we will aim to explore both practical exemplars and potential designs incorporating sensor chips into wound dressings. The project will be of great value to Prof. Rimmer in enabling an immersive research experience within the partner organisation that will underpin future substantial programmes. The project is central to the industrial strategy Grand Challenges in Ageing Society and AI and data. Treatment of infection becomes more difficult with age and non-healing wounds in the elderly (eg diabetic patents) can be difficult to treat. Smart treatments and enhanced wound dressings can be a key way of improving outcomes. Also, smart dressings incorporating chips that can provide real data on the state of wounds can facilitate an AI/data rich approach to wound care.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact The experiments have resulted in potentially a new class of materials that have also been shown to be non-immunogenic and non-cytotoxic, in vitro. The polymers maybe be commercially useful and the pyrrole carbodithioate polymers can already be produced in 0.5 kg quantities cost-effectively. They may provide a useful adjunct to already commercialised treatments. The production of QCMB responsive chips opens the way to produce biosensors and possible wearable wound dressings with embedded technology for indicating bacterial load. We hope to further develop these technologies via Innovate UK in the coming months. Rimmer was also trained in CDC technology and this will facilitate further collaboration with 5D. Next steps: Currently, we are investigating possible funding with Innovate UK and to support this the work is being written to for publication with the possibility to protect some aspects.
Start Year 2021
 
Description NBIC FTMA3_21_007 Industry Placement to Evaluate Porcine Skin as a Model for Human Biofilm Research (Holly Wilkinson) 
Organisation Cica Biomedical Ltd
Country United Kingdom 
Sector Private 
PI Contribution The FTMA recipient is a talented researcher at the Hull York Medical School (HYMS) with expertise in lab-based skin microbiome/biofilm research and keen to progress to gaining insight into commercial research. The industry partner is a contract research organisation with over 20 years' experience of providing in vivo skin and wound studies yet has limited microbiological capabilities. There is significant emerging interest to understand the role of the microbiome/biofilms in skin ageing and disease, with a wide variety of clinical and cosmetic applications. Our group in HYMS have strong expertise in using in vitro biofilm models to evaluate host-microbe interactions and commercial product efficacy. Currently, there are no lab-based models that can suitably recapitulate the complex microbiological environment of living human skin. The only way to overcome current translational challenges is to create a step change from reductionist lab-based models to using living skin in vivo. Attempts to address this problem by performing skin wound microbiome/biofilm studies in mice have failed as the murine microbiome is compositionally different to human. Based on a small-scale pilot study, we believe porcine skin more faithfully represents the human skin microbiome, providing an exciting model for studying skin biofilm interactions and targeted antimicrobials. In this project, the FTMA recipient will work closely with the industry partner to: 1) Obtain unique insight into a commercial research environment. 2) Undertake training in commercial pig skin/wound studies. 3) Apply their microbiology expertise to evaluate the suitability of pig skin as a model for human-relevant microbiome/biofilm studies. The proposed placement thus aligns with the grand challenge areas of healthy ageing and personalised medicine, where development of a novel pig skin model that faithfully replicates the human skin microbiome will provide an opportunity to explore drivers of healthy ageing and deliver personalised therapies.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Feedback from academic: This FTMA project has provided a crucial step change from reductionist lab-based models by formally demonstrating the suitability of in vivo pig skin as a living microbiome model which is compositionally more similar to human skin than mouse skin. Indeed, this will enable Cica to develop further partnering opportunities by providing commercial collaborators with a validated human-relevant skin microbiome model in pigs, which was previously unreported and unappreciated. Moreover, Cica (and Sammi) have begun to further expand upon this model by testing the effect of common clinical skin dressings on the microbiome. These data have provided Cica with capabilities in both sequencing and traditional culture methods that: a) can be added to current work packages with existing commercial partners and; b) can be used to attract new industry partners interested in skin microbiome research models. Moreover, the data collected from testing occlusive versus non-occlusive dressings can be used to expand the portfolio of skin microbiome models on offer. For example, testing selective antimicrobials in a normal (non-occlusive) versus pathological (occlusive) skin environment. NOTE: MinION sequencing was compared to traditional microbial culture techniques (agar) and was found to be superior in assessment of skin microbiome. We found that colonies isolated and identified via commercially available chromogenic agar were often not the "expected" species when colony specification was confirmed via MinION sequencing. HYMS has benefitted from the FTMA by enabling career development of a talented early career researcher, who has gained important industry insight that has now led to her recruitment to the skin microbiome division of a local, leading multinational (position accepted, beginning in May 2022). The FTMA has also enabled Cica and HYMS to identify new areas of collaboration. One of these is an exciting commercially funded study to assess the efficacy of selective antimicrobials without harming the resident microbiota. In addition, the lead applicant (Wilkinson) has applied for an NBIC CTP studentship in collaboration with Cica to continue this exciting work into skin microbiome and antimicrobial resistance. Cica and HYMS continue to have crucial discussions around skin microbiome and biofilm research capabilities with other industry partners. Future work: Our pilot data suggests that pigs may be a promising human-relevant model to assess the effects of commercial products on the skin microbiome. We will therefore continue to evaluate the suitability of pigs for microbiome studies by working closely with Cica to expand on our pilot data (e.g. more replicates). We also plan to assess the effects of occlusion on the pig wound microbiome as our preliminary findings suggest that the wound microbiome may be different as wounds provide a more optimal environment for pathogenic bacterial growth (e.g. moist, wound exudate, nutrients). Ultimately, these data will enable us to develop commercial microbiome/ biofilm studies collaboratively with Cica and allow us to determine key microbial factors that drive skin ageing and biofilm infection. Indeed, these studies may also pave the way to clinical wound evaluation and development of personalised antimicrobial therapies.
Start Year 2021
 
Description NBIC FTMA3_21_007 Industry Placement to Evaluate Porcine Skin as a Model for Human Biofilm Research (Holly Wilkinson) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The FTMA recipient is a talented researcher at the Hull York Medical School (HYMS) with expertise in lab-based skin microbiome/biofilm research and keen to progress to gaining insight into commercial research. The industry partner is a contract research organisation with over 20 years' experience of providing in vivo skin and wound studies yet has limited microbiological capabilities. There is significant emerging interest to understand the role of the microbiome/biofilms in skin ageing and disease, with a wide variety of clinical and cosmetic applications. Our group in HYMS have strong expertise in using in vitro biofilm models to evaluate host-microbe interactions and commercial product efficacy. Currently, there are no lab-based models that can suitably recapitulate the complex microbiological environment of living human skin. The only way to overcome current translational challenges is to create a step change from reductionist lab-based models to using living skin in vivo. Attempts to address this problem by performing skin wound microbiome/biofilm studies in mice have failed as the murine microbiome is compositionally different to human. Based on a small-scale pilot study, we believe porcine skin more faithfully represents the human skin microbiome, providing an exciting model for studying skin biofilm interactions and targeted antimicrobials. In this project, the FTMA recipient will work closely with the industry partner to: 1) Obtain unique insight into a commercial research environment. 2) Undertake training in commercial pig skin/wound studies. 3) Apply their microbiology expertise to evaluate the suitability of pig skin as a model for human-relevant microbiome/biofilm studies. The proposed placement thus aligns with the grand challenge areas of healthy ageing and personalised medicine, where development of a novel pig skin model that faithfully replicates the human skin microbiome will provide an opportunity to explore drivers of healthy ageing and deliver personalised therapies.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Feedback from academic: This FTMA project has provided a crucial step change from reductionist lab-based models by formally demonstrating the suitability of in vivo pig skin as a living microbiome model which is compositionally more similar to human skin than mouse skin. Indeed, this will enable Cica to develop further partnering opportunities by providing commercial collaborators with a validated human-relevant skin microbiome model in pigs, which was previously unreported and unappreciated. Moreover, Cica (and Sammi) have begun to further expand upon this model by testing the effect of common clinical skin dressings on the microbiome. These data have provided Cica with capabilities in both sequencing and traditional culture methods that: a) can be added to current work packages with existing commercial partners and; b) can be used to attract new industry partners interested in skin microbiome research models. Moreover, the data collected from testing occlusive versus non-occlusive dressings can be used to expand the portfolio of skin microbiome models on offer. For example, testing selective antimicrobials in a normal (non-occlusive) versus pathological (occlusive) skin environment. NOTE: MinION sequencing was compared to traditional microbial culture techniques (agar) and was found to be superior in assessment of skin microbiome. We found that colonies isolated and identified via commercially available chromogenic agar were often not the "expected" species when colony specification was confirmed via MinION sequencing. HYMS has benefitted from the FTMA by enabling career development of a talented early career researcher, who has gained important industry insight that has now led to her recruitment to the skin microbiome division of a local, leading multinational (position accepted, beginning in May 2022). The FTMA has also enabled Cica and HYMS to identify new areas of collaboration. One of these is an exciting commercially funded study to assess the efficacy of selective antimicrobials without harming the resident microbiota. In addition, the lead applicant (Wilkinson) has applied for an NBIC CTP studentship in collaboration with Cica to continue this exciting work into skin microbiome and antimicrobial resistance. Cica and HYMS continue to have crucial discussions around skin microbiome and biofilm research capabilities with other industry partners. Future work: Our pilot data suggests that pigs may be a promising human-relevant model to assess the effects of commercial products on the skin microbiome. We will therefore continue to evaluate the suitability of pigs for microbiome studies by working closely with Cica to expand on our pilot data (e.g. more replicates). We also plan to assess the effects of occlusion on the pig wound microbiome as our preliminary findings suggest that the wound microbiome may be different as wounds provide a more optimal environment for pathogenic bacterial growth (e.g. moist, wound exudate, nutrients). Ultimately, these data will enable us to develop commercial microbiome/ biofilm studies collaboratively with Cica and allow us to determine key microbial factors that drive skin ageing and biofilm infection. Indeed, these studies may also pave the way to clinical wound evaluation and development of personalised antimicrobial therapies.
Start Year 2021
 
Description NBIC FTMA3_21_007 Industry Placement to Evaluate Porcine Skin as a Model for Human Biofilm Research (Holly Wilkinson) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution The FTMA recipient is a talented researcher at the Hull York Medical School (HYMS) with expertise in lab-based skin microbiome/biofilm research and keen to progress to gaining insight into commercial research. The industry partner is a contract research organisation with over 20 years' experience of providing in vivo skin and wound studies yet has limited microbiological capabilities. There is significant emerging interest to understand the role of the microbiome/biofilms in skin ageing and disease, with a wide variety of clinical and cosmetic applications. Our group in HYMS have strong expertise in using in vitro biofilm models to evaluate host-microbe interactions and commercial product efficacy. Currently, there are no lab-based models that can suitably recapitulate the complex microbiological environment of living human skin. The only way to overcome current translational challenges is to create a step change from reductionist lab-based models to using living skin in vivo. Attempts to address this problem by performing skin wound microbiome/biofilm studies in mice have failed as the murine microbiome is compositionally different to human. Based on a small-scale pilot study, we believe porcine skin more faithfully represents the human skin microbiome, providing an exciting model for studying skin biofilm interactions and targeted antimicrobials. In this project, the FTMA recipient will work closely with the industry partner to: 1) Obtain unique insight into a commercial research environment. 2) Undertake training in commercial pig skin/wound studies. 3) Apply their microbiology expertise to evaluate the suitability of pig skin as a model for human-relevant microbiome/biofilm studies. The proposed placement thus aligns with the grand challenge areas of healthy ageing and personalised medicine, where development of a novel pig skin model that faithfully replicates the human skin microbiome will provide an opportunity to explore drivers of healthy ageing and deliver personalised therapies.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Feedback from academic: This FTMA project has provided a crucial step change from reductionist lab-based models by formally demonstrating the suitability of in vivo pig skin as a living microbiome model which is compositionally more similar to human skin than mouse skin. Indeed, this will enable Cica to develop further partnering opportunities by providing commercial collaborators with a validated human-relevant skin microbiome model in pigs, which was previously unreported and unappreciated. Moreover, Cica (and Sammi) have begun to further expand upon this model by testing the effect of common clinical skin dressings on the microbiome. These data have provided Cica with capabilities in both sequencing and traditional culture methods that: a) can be added to current work packages with existing commercial partners and; b) can be used to attract new industry partners interested in skin microbiome research models. Moreover, the data collected from testing occlusive versus non-occlusive dressings can be used to expand the portfolio of skin microbiome models on offer. For example, testing selective antimicrobials in a normal (non-occlusive) versus pathological (occlusive) skin environment. NOTE: MinION sequencing was compared to traditional microbial culture techniques (agar) and was found to be superior in assessment of skin microbiome. We found that colonies isolated and identified via commercially available chromogenic agar were often not the "expected" species when colony specification was confirmed via MinION sequencing. HYMS has benefitted from the FTMA by enabling career development of a talented early career researcher, who has gained important industry insight that has now led to her recruitment to the skin microbiome division of a local, leading multinational (position accepted, beginning in May 2022). The FTMA has also enabled Cica and HYMS to identify new areas of collaboration. One of these is an exciting commercially funded study to assess the efficacy of selective antimicrobials without harming the resident microbiota. In addition, the lead applicant (Wilkinson) has applied for an NBIC CTP studentship in collaboration with Cica to continue this exciting work into skin microbiome and antimicrobial resistance. Cica and HYMS continue to have crucial discussions around skin microbiome and biofilm research capabilities with other industry partners. Future work: Our pilot data suggests that pigs may be a promising human-relevant model to assess the effects of commercial products on the skin microbiome. We will therefore continue to evaluate the suitability of pigs for microbiome studies by working closely with Cica to expand on our pilot data (e.g. more replicates). We also plan to assess the effects of occlusion on the pig wound microbiome as our preliminary findings suggest that the wound microbiome may be different as wounds provide a more optimal environment for pathogenic bacterial growth (e.g. moist, wound exudate, nutrients). Ultimately, these data will enable us to develop commercial microbiome/ biofilm studies collaboratively with Cica and allow us to determine key microbial factors that drive skin ageing and biofilm infection. Indeed, these studies may also pave the way to clinical wound evaluation and development of personalised antimicrobial therapies.
Start Year 2021
 
Description NBIC FTMA3_21_008 Plasma (ionised gas) disinfection (Jean-Yves Maillard) 
Organisation Cardiff University
Country United Kingdom 
Sector Academic/University 
PI Contribution This project will explore biofilm-related applications for an innovative technology and develop the innovation capability of the FTMA recipient to better direct and exploit the project outcomes. Fourth State's proprietary plasma technology (ionised gas, the fourth state of matter) electronically converts ambient air into gaseous chemical species (ozone and/or nitrogen oxides) with antimicrobial properties. The company's compact and user-friendly products are designed to generate defined concentrations of these chemicals in-situ, precisely and reliably. The recipient of this FTMA is Fourth State's Research & Innovation Manager, who has been directly involved in shaping the path of technology development. They have previously worked with academic partners with biofilm expertise on grant-funded projects, including 2 x NBIC POCs. This project will pump-prime a potential collaboration with Cardiff University and build the knowledge and skills of the FTMA recipient. This will have impacts on the company's wider commercialisation strategy, R&D activities and innovation processes, accelerating delivery of the potential societal, environmental and economic benefits of the technology. The project is aligned with NBIC (biofilm prevention, management) and UKRI ISCF themes (leading-edge healthcare, healthy ageing, transforming food production).
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Feedback from academic: Expected outcomes (from proposal): 1. List of potential use cases, based on informal discussions with Cardiff group • Achieved: supplemented by FTMA recipient's review of academic group's publications and other literature on disinfection unmet needs / market trends / limitations of current technologies and practices. • Regular face to face informal discussions took place, providing frequent results update and informing on future laboratory testing, pitfall on microbicidal testing using this technology and reflections on device applications, particularly concerning test parameters and efficacy goal for specific markets. 2. Opportunity assessment and prioritisation - considering market/impact potential, regulatory pathway and testing requirements, competitive/IP landscape and potential OEM partners Achieved: narrowed down focus to fomite disinfection, primarily in healthcare & wellbeing settings, rationale: • Complementary to other business objectives in adjacent market segments • Accessible via understood channels and existing networks, including NBIC, shareholders Wessex AHSN and US-based partners • Unmet needs recently surfaced by COVID-19 and driven by increasing rates of hospital-acquired infections, including antimicrobial-resistant, biofilm-forming strains which also spread in non-medical contexts • Exploiting patented and comprehensively validated Fourth State plasma (ionised gas) RONS generation technology, in particular current ModuNOxD products (used to generate pilot data in this project) already sold under licence for non-medical fomite disinfection purposes • Synergies with the Cardiff group's research agenda, networks and scientific/regulatory expertise 3. Draft go-to-market strategy for disinfection applications of Fourth State's technology Achieved: >30-page draft report generated drawing on best practices in B2B marketing from CIM courses, covering: • Fomite disinfection/sterilisation market drivers and current dynamics • The company's current situation in relation to the market • Target segments and rationale, in line with overall corporate strategy • Positioning of potential products versus competitors and substitutes • B2B marketing tactics to deploy given limited company resources 4. Pilot data generation using biofilm models, supporting product activity and providing case for follow-on activities Achieved, albeit not yet using real-world-representative wet/dry biofilm models • Opted to focus initially on dried Staph. aureus on stainless steel surfaces, to more efficiently explore device parameter space (relatively quick to prepare, treat and analyse assays versus more complex biofilm models) • Varied ozone/NOx modes with flow rate, contact time, surface wetting with DI water/PBS before treatment • During operation at low flow rates (production of nitrogen species), the device was unable to eradicate bacteria dried onto surfaces. However, at a flow rate of 5L/min (ozone production) a 60 min reaction time sufficiently disinfected surfaces containing dried bacteria. • Using the RONS generator in combination with a wetting step restored its bactericidal activity using flow rates of 1 and 5 L/min over 30 - 60 min. It is likely that NOx at a low flow rate and contact time was unable to penetrate layers of bacteria desiccated on surfaces. To verify this hypothesis dried bacteria were embedded in an alginate matrix that allows the penetration of gas. Results show that RONS generated at 1 and 3 L/min were bactericidal (> 4 log10 reduction, i.e., 99.99% reduction) within 60 min. • These results highlight the bactericidal potential of the RONS generator against Staphylococcus aureus but also provided valuable information on device efficacy current limitations. The alginate model provides flexibility to test other bacteria and other microorganisms that are usually susceptible to desiccation. • Overall, these results are encouraging and confirmed the microbicidal potential of the RONS generator. Additional experiments need to be performed to verify the limit of the microbicidal activity of the RONS generator (using lower flow rate, shorter contact time, and different temperature). The spectrum of microbicidal activity needs to be ascertained. Understanding the mechanisms of microbicidal activity is also recommended. Finally, hydrated condition restores microbicidal activity. With that in mind investigations combining a misting device in combination with the RONS generator should be explored. Additional outcomes: • CIM course takeaways: comprehensive knowledge of contemporary best practices in B2B marketing, feeding into company strategy, marketing materials and processes. Company website refresh in progress drawing directly on lessons learned - expect increase in enquiries and sales revenue for laboratory equipment products (NOxLab) and OEM solutions (ModuNOx). Increased confidence and capability in briefing/working with specialist B2B marketing and market research agencies, and in specifying role requirements for future internal marketing hires (product managers, marketing managers). Network of contacts in B2B marketing from relationships with course directors and attendees. • Feedback on product usability: input into new laboratory product specifications (NOxLab-D), to allow easier tuning of ModuNOxD ozone/NOx generator with a digital flow meter, improving on the analogue flow meter used in this study. • Effective SME-university working relationship established: providing a solid foundation for future collaboration, to develop new biocidal applications for Fourth State's technology platform. Future work: We are together exploring a potential Knowledge Transfer Partnership (KTP) application, to develop new applications for Fourth State's products. Maillard has a great experience in KTP collaborations with industrial partners leading to Innovation awards, dissemination of results including customers' documentation and exploitation of results including impact case for University REF return. Initial discussion with Cardiff University KTP office and KTO adviser have already taking place. This would benefit from any help available for • conducting market research on fomite disinfection current practices, particularly in healthcare & wellbeing settings: for fomites in non-medical areas such as receptions, offices, waiting rooms, catering, toilet and washing facilities, as well as in medical areas such as GP/dental clinics, hospital wards, operating theatres • limitations of existing technologies, particularly directly competing low temperature technologies such as UV radiation, ethylene oxide, vaporised hydrogen peroxide and other plasma/ozone/NOx systems on the market • associated costs to healthcare systems e.g., health economic costs of hospital-acquired infections acquired through fomite transmission, labour cost for cleaning which may be ineffective/unreliable for certain fomites • associated costs to the environment: decentralised, in-situ ozone/NOx generation from ambient air may have sustainability benefits versus existing technologies and plastic-packaged/environmentally-harmful biocides • planning the KTP project technical work plan • preparing/reviewing the application and exploitation plan A conference paper abstract is also currently in preparation, on adapting standard testing protocols to test devices/ biocides in real world situations, drawing on data generated using Fourth State's device in ozone generation mode. The abstract will be submitted for presentation at IPS2022 in Bournemouth.
Start Year 2021
 
Description NBIC FTMA3_21_008 Plasma (ionised gas) disinfection (Jean-Yves Maillard) 
Organisation Fourth State Medicine Ltd
Country United Kingdom 
Sector Private 
PI Contribution This project will explore biofilm-related applications for an innovative technology and develop the innovation capability of the FTMA recipient to better direct and exploit the project outcomes. Fourth State's proprietary plasma technology (ionised gas, the fourth state of matter) electronically converts ambient air into gaseous chemical species (ozone and/or nitrogen oxides) with antimicrobial properties. The company's compact and user-friendly products are designed to generate defined concentrations of these chemicals in-situ, precisely and reliably. The recipient of this FTMA is Fourth State's Research & Innovation Manager, who has been directly involved in shaping the path of technology development. They have previously worked with academic partners with biofilm expertise on grant-funded projects, including 2 x NBIC POCs. This project will pump-prime a potential collaboration with Cardiff University and build the knowledge and skills of the FTMA recipient. This will have impacts on the company's wider commercialisation strategy, R&D activities and innovation processes, accelerating delivery of the potential societal, environmental and economic benefits of the technology. The project is aligned with NBIC (biofilm prevention, management) and UKRI ISCF themes (leading-edge healthcare, healthy ageing, transforming food production).
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Feedback from academic: Expected outcomes (from proposal): 1. List of potential use cases, based on informal discussions with Cardiff group • Achieved: supplemented by FTMA recipient's review of academic group's publications and other literature on disinfection unmet needs / market trends / limitations of current technologies and practices. • Regular face to face informal discussions took place, providing frequent results update and informing on future laboratory testing, pitfall on microbicidal testing using this technology and reflections on device applications, particularly concerning test parameters and efficacy goal for specific markets. 2. Opportunity assessment and prioritisation - considering market/impact potential, regulatory pathway and testing requirements, competitive/IP landscape and potential OEM partners Achieved: narrowed down focus to fomite disinfection, primarily in healthcare & wellbeing settings, rationale: • Complementary to other business objectives in adjacent market segments • Accessible via understood channels and existing networks, including NBIC, shareholders Wessex AHSN and US-based partners • Unmet needs recently surfaced by COVID-19 and driven by increasing rates of hospital-acquired infections, including antimicrobial-resistant, biofilm-forming strains which also spread in non-medical contexts • Exploiting patented and comprehensively validated Fourth State plasma (ionised gas) RONS generation technology, in particular current ModuNOxD products (used to generate pilot data in this project) already sold under licence for non-medical fomite disinfection purposes • Synergies with the Cardiff group's research agenda, networks and scientific/regulatory expertise 3. Draft go-to-market strategy for disinfection applications of Fourth State's technology Achieved: >30-page draft report generated drawing on best practices in B2B marketing from CIM courses, covering: • Fomite disinfection/sterilisation market drivers and current dynamics • The company's current situation in relation to the market • Target segments and rationale, in line with overall corporate strategy • Positioning of potential products versus competitors and substitutes • B2B marketing tactics to deploy given limited company resources 4. Pilot data generation using biofilm models, supporting product activity and providing case for follow-on activities Achieved, albeit not yet using real-world-representative wet/dry biofilm models • Opted to focus initially on dried Staph. aureus on stainless steel surfaces, to more efficiently explore device parameter space (relatively quick to prepare, treat and analyse assays versus more complex biofilm models) • Varied ozone/NOx modes with flow rate, contact time, surface wetting with DI water/PBS before treatment • During operation at low flow rates (production of nitrogen species), the device was unable to eradicate bacteria dried onto surfaces. However, at a flow rate of 5L/min (ozone production) a 60 min reaction time sufficiently disinfected surfaces containing dried bacteria. • Using the RONS generator in combination with a wetting step restored its bactericidal activity using flow rates of 1 and 5 L/min over 30 - 60 min. It is likely that NOx at a low flow rate and contact time was unable to penetrate layers of bacteria desiccated on surfaces. To verify this hypothesis dried bacteria were embedded in an alginate matrix that allows the penetration of gas. Results show that RONS generated at 1 and 3 L/min were bactericidal (> 4 log10 reduction, i.e., 99.99% reduction) within 60 min. • These results highlight the bactericidal potential of the RONS generator against Staphylococcus aureus but also provided valuable information on device efficacy current limitations. The alginate model provides flexibility to test other bacteria and other microorganisms that are usually susceptible to desiccation. • Overall, these results are encouraging and confirmed the microbicidal potential of the RONS generator. Additional experiments need to be performed to verify the limit of the microbicidal activity of the RONS generator (using lower flow rate, shorter contact time, and different temperature). The spectrum of microbicidal activity needs to be ascertained. Understanding the mechanisms of microbicidal activity is also recommended. Finally, hydrated condition restores microbicidal activity. With that in mind investigations combining a misting device in combination with the RONS generator should be explored. Additional outcomes: • CIM course takeaways: comprehensive knowledge of contemporary best practices in B2B marketing, feeding into company strategy, marketing materials and processes. Company website refresh in progress drawing directly on lessons learned - expect increase in enquiries and sales revenue for laboratory equipment products (NOxLab) and OEM solutions (ModuNOx). Increased confidence and capability in briefing/working with specialist B2B marketing and market research agencies, and in specifying role requirements for future internal marketing hires (product managers, marketing managers). Network of contacts in B2B marketing from relationships with course directors and attendees. • Feedback on product usability: input into new laboratory product specifications (NOxLab-D), to allow easier tuning of ModuNOxD ozone/NOx generator with a digital flow meter, improving on the analogue flow meter used in this study. • Effective SME-university working relationship established: providing a solid foundation for future collaboration, to develop new biocidal applications for Fourth State's technology platform. Future work: We are together exploring a potential Knowledge Transfer Partnership (KTP) application, to develop new applications for Fourth State's products. Maillard has a great experience in KTP collaborations with industrial partners leading to Innovation awards, dissemination of results including customers' documentation and exploitation of results including impact case for University REF return. Initial discussion with Cardiff University KTP office and KTO adviser have already taking place. This would benefit from any help available for • conducting market research on fomite disinfection current practices, particularly in healthcare & wellbeing settings: for fomites in non-medical areas such as receptions, offices, waiting rooms, catering, toilet and washing facilities, as well as in medical areas such as GP/dental clinics, hospital wards, operating theatres • limitations of existing technologies, particularly directly competing low temperature technologies such as UV radiation, ethylene oxide, vaporised hydrogen peroxide and other plasma/ozone/NOx systems on the market • associated costs to healthcare systems e.g., health economic costs of hospital-acquired infections acquired through fomite transmission, labour cost for cleaning which may be ineffective/unreliable for certain fomites • associated costs to the environment: decentralised, in-situ ozone/NOx generation from ambient air may have sustainability benefits versus existing technologies and plastic-packaged/environmentally-harmful biocides • planning the KTP project technical work plan • preparing/reviewing the application and exploitation plan A conference paper abstract is also currently in preparation, on adapting standard testing protocols to test devices/ biocides in real world situations, drawing on data generated using Fourth State's device in ozone generation mode. The abstract will be submitted for presentation at IPS2022 in Bournemouth.
Start Year 2021
 
Description NBIC FTMA3_21_008 Plasma (ionised gas) disinfection (Jean-Yves Maillard) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This project will explore biofilm-related applications for an innovative technology and develop the innovation capability of the FTMA recipient to better direct and exploit the project outcomes. Fourth State's proprietary plasma technology (ionised gas, the fourth state of matter) electronically converts ambient air into gaseous chemical species (ozone and/or nitrogen oxides) with antimicrobial properties. The company's compact and user-friendly products are designed to generate defined concentrations of these chemicals in-situ, precisely and reliably. The recipient of this FTMA is Fourth State's Research & Innovation Manager, who has been directly involved in shaping the path of technology development. They have previously worked with academic partners with biofilm expertise on grant-funded projects, including 2 x NBIC POCs. This project will pump-prime a potential collaboration with Cardiff University and build the knowledge and skills of the FTMA recipient. This will have impacts on the company's wider commercialisation strategy, R&D activities and innovation processes, accelerating delivery of the potential societal, environmental and economic benefits of the technology. The project is aligned with NBIC (biofilm prevention, management) and UKRI ISCF themes (leading-edge healthcare, healthy ageing, transforming food production).
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Feedback from academic: Expected outcomes (from proposal): 1. List of potential use cases, based on informal discussions with Cardiff group • Achieved: supplemented by FTMA recipient's review of academic group's publications and other literature on disinfection unmet needs / market trends / limitations of current technologies and practices. • Regular face to face informal discussions took place, providing frequent results update and informing on future laboratory testing, pitfall on microbicidal testing using this technology and reflections on device applications, particularly concerning test parameters and efficacy goal for specific markets. 2. Opportunity assessment and prioritisation - considering market/impact potential, regulatory pathway and testing requirements, competitive/IP landscape and potential OEM partners Achieved: narrowed down focus to fomite disinfection, primarily in healthcare & wellbeing settings, rationale: • Complementary to other business objectives in adjacent market segments • Accessible via understood channels and existing networks, including NBIC, shareholders Wessex AHSN and US-based partners • Unmet needs recently surfaced by COVID-19 and driven by increasing rates of hospital-acquired infections, including antimicrobial-resistant, biofilm-forming strains which also spread in non-medical contexts • Exploiting patented and comprehensively validated Fourth State plasma (ionised gas) RONS generation technology, in particular current ModuNOxD products (used to generate pilot data in this project) already sold under licence for non-medical fomite disinfection purposes • Synergies with the Cardiff group's research agenda, networks and scientific/regulatory expertise 3. Draft go-to-market strategy for disinfection applications of Fourth State's technology Achieved: >30-page draft report generated drawing on best practices in B2B marketing from CIM courses, covering: • Fomite disinfection/sterilisation market drivers and current dynamics • The company's current situation in relation to the market • Target segments and rationale, in line with overall corporate strategy • Positioning of potential products versus competitors and substitutes • B2B marketing tactics to deploy given limited company resources 4. Pilot data generation using biofilm models, supporting product activity and providing case for follow-on activities Achieved, albeit not yet using real-world-representative wet/dry biofilm models • Opted to focus initially on dried Staph. aureus on stainless steel surfaces, to more efficiently explore device parameter space (relatively quick to prepare, treat and analyse assays versus more complex biofilm models) • Varied ozone/NOx modes with flow rate, contact time, surface wetting with DI water/PBS before treatment • During operation at low flow rates (production of nitrogen species), the device was unable to eradicate bacteria dried onto surfaces. However, at a flow rate of 5L/min (ozone production) a 60 min reaction time sufficiently disinfected surfaces containing dried bacteria. • Using the RONS generator in combination with a wetting step restored its bactericidal activity using flow rates of 1 and 5 L/min over 30 - 60 min. It is likely that NOx at a low flow rate and contact time was unable to penetrate layers of bacteria desiccated on surfaces. To verify this hypothesis dried bacteria were embedded in an alginate matrix that allows the penetration of gas. Results show that RONS generated at 1 and 3 L/min were bactericidal (> 4 log10 reduction, i.e., 99.99% reduction) within 60 min. • These results highlight the bactericidal potential of the RONS generator against Staphylococcus aureus but also provided valuable information on device efficacy current limitations. The alginate model provides flexibility to test other bacteria and other microorganisms that are usually susceptible to desiccation. • Overall, these results are encouraging and confirmed the microbicidal potential of the RONS generator. Additional experiments need to be performed to verify the limit of the microbicidal activity of the RONS generator (using lower flow rate, shorter contact time, and different temperature). The spectrum of microbicidal activity needs to be ascertained. Understanding the mechanisms of microbicidal activity is also recommended. Finally, hydrated condition restores microbicidal activity. With that in mind investigations combining a misting device in combination with the RONS generator should be explored. Additional outcomes: • CIM course takeaways: comprehensive knowledge of contemporary best practices in B2B marketing, feeding into company strategy, marketing materials and processes. Company website refresh in progress drawing directly on lessons learned - expect increase in enquiries and sales revenue for laboratory equipment products (NOxLab) and OEM solutions (ModuNOx). Increased confidence and capability in briefing/working with specialist B2B marketing and market research agencies, and in specifying role requirements for future internal marketing hires (product managers, marketing managers). Network of contacts in B2B marketing from relationships with course directors and attendees. • Feedback on product usability: input into new laboratory product specifications (NOxLab-D), to allow easier tuning of ModuNOxD ozone/NOx generator with a digital flow meter, improving on the analogue flow meter used in this study. • Effective SME-university working relationship established: providing a solid foundation for future collaboration, to develop new biocidal applications for Fourth State's technology platform. Future work: We are together exploring a potential Knowledge Transfer Partnership (KTP) application, to develop new applications for Fourth State's products. Maillard has a great experience in KTP collaborations with industrial partners leading to Innovation awards, dissemination of results including customers' documentation and exploitation of results including impact case for University REF return. Initial discussion with Cardiff University KTP office and KTO adviser have already taking place. This would benefit from any help available for • conducting market research on fomite disinfection current practices, particularly in healthcare & wellbeing settings: for fomites in non-medical areas such as receptions, offices, waiting rooms, catering, toilet and washing facilities, as well as in medical areas such as GP/dental clinics, hospital wards, operating theatres • limitations of existing technologies, particularly directly competing low temperature technologies such as UV radiation, ethylene oxide, vaporised hydrogen peroxide and other plasma/ozone/NOx systems on the market • associated costs to healthcare systems e.g., health economic costs of hospital-acquired infections acquired through fomite transmission, labour cost for cleaning which may be ineffective/unreliable for certain fomites • associated costs to the environment: decentralised, in-situ ozone/NOx generation from ambient air may have sustainability benefits versus existing technologies and plastic-packaged/environmentally-harmful biocides • planning the KTP project technical work plan • preparing/reviewing the application and exploitation plan A conference paper abstract is also currently in preparation, on adapting standard testing protocols to test devices/ biocides in real world situations, drawing on data generated using Fourth State's device in ozone generation mode. The abstract will be submitted for presentation at IPS2022 in Bournemouth.
Start Year 2021
 
Description NBIC FTMA3_21_010 Biofilm Monitoring at Drinking Water Treatment Works: Impact of chlorine on biofilms and water quality (Katherine Fish) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution High quality, clean drinking water is the foundation of public health and hygiene. Biofilms are endemic within drinking water systems, impacting asset performance and water quality. Current microbial monitoring and management (e.g. chlorination) is restricted to analysis of (easily sampled) planktonic microorganisms in the bulk-water, which are unrepresentative of biofilms. Research in idealised systems has shown that biofilms provide protection from disinfection, supporting microbial proliferation. Although critical to managing water safety, monitoring biofilm formation and response to interventions within operational drinking water assets is neglected, primarily due to access and sampling difficulties (without disrupting supply). This FTMA aims to advance the understanding of biofilm growth in operational systems and inform sustainable microbial management approaches by providing a platform to increase porosity of, and leverage value from, interactions between The University of Sheffield (UoS; research) and Severn Trent Water (STW; industry). Specifically, a series of exchange visits will be utilised to design and implement a pilot field-project to detect and monitor biofilm growth throughout a drinking water treatment works (aligning with two NBIC themes). UoS has developed a Biofilm Monitoring Device (BMD) for rapid, sustainable and non-invasive assessment of biofilm (re)formation rates in operational systems, application of this at STW will validate its suitability for field sampling at treatment works. Ultimately, the collaborative relationships established and data generated will support a larger proposal to determine water quality and biofilm responses to changes in chlorine concentration. This will advance biofilm understanding and management, impacting the frequency/intensity of disinfection, thereby reducing energy consumption, time and finance costs whilst reducing quality failures, improving customer service and protecting public health. Thus aligning with the healthy aging and clean growth priorities of Industry Strategy Challenge Fund. Personal development for PI: Expanding professional network, providing a platform to demonstrate research independence and leadership in applied biofilm research.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Feedback from academic: This FTMA provided the opportunity to begin to address an industrial challenge by elevating the technological level of a biofilm-monitoring device that, if proven, will support further key advancements in biofilm and water quality management. Crucially, the visits, collaborative relationships established and pilot work supported by the FTMA highlighted the potential for the application of drinking water BMD to provide better understanding of the interactions between biofilms and water quality. This aligned with an operational need to change chlorine concentrations at a particular site. Subsequently, a 12-month project has been proposed to STW. The proposal aims to determine water quality and biofilm responses to changes in chlorine concentration, simultaneously comparing biofilm growth rates under different chlorine concentrations. This will advance biofilm understanding and management, influencing the frequency/intensity of disinfection, thereby reducing energy consumption, time and finance costs whilst reducing quality failures, improving customer service and protecting public health. Thus aligning with the healthy aging and clean growth priorities of Industry Strategy Challenge Fund. The FTMA has also supported the personal development of the early career PI via expansion and consolidation of a professional network, providing a platform to demonstrate research independence and leadership in applied biofilm research. SPECIFIC OUTPUTS/SUCCESS MEASURES INCLUDE: • Knowledge and skill transfer between sectors: Increased understanding between partners of their perspectives, specifically exchanging STW's practical challenges and expertise and UoS's world-leading research capabilities and expertise. • Successful collaborative relationship: Established foundation with collaborators (and their wider teams). • Developed trust and buy-in from STW treatment works operatives (critical for larger proposals). • Bespoke Biofilm Monitoring Devices designed, built and installed. • Optimisation of sampling methods to detect and monitor biofilms (will be included in a paper, currently in preparation). • 12 month proposal (Total Value: £135K) for a longitudinal biomonitoring project successfully pitched to Severn Trent Water, contracts are currently under negotiation with a view to starting the project May 2022. Future work: The STW (industry) funded project is due to begin in May (subject to contracts being completed). This provides an opportunity to validate the use of the BMDs at a treatment works, monitoring biofilm growth and response to a changing disinfection. The project will evidence the base-line biofilm growth in STW's water treatment works (WTW), providing comparison for assessing impact of interventions on biofilm formation/mobilisation in the WTW and downstream system, and any resulting change in risks to water quality. Thus providing confidence of the actual impacts (if any) of chlorine reduction is on microbial failures risk. Longer term plans includes the BMD uptake by industry, providing invaluable understanding of disinfection practices and their longer-term impact on biofilms and water quality downstream. This will be achieved by continued collaboration between UoS and STW, expanding to include additional water companies, academic institutions and other stakeholders, to help secure funding from UKRI sources. Drawing on NBIC's international links going forward will be invaluable for dissemination of results and developing further collaborative opportunities. FUTURE IMPACTS Outputs will have diverse impacts for water suppliers, regulators, academia and the public. Water quality failures and infrastructure maintenance are economically costly (thousands to millions of pounds) and intrinsically linked to public health - biofilm-associated pathogens cause waterborne illnesses and fatalities. Data generated will enable water utilities to improve biofilm management, rapidly analyse the biological performance of assets and prioritise microbial management in terms of risk return. This includes consideration of the trade-offs between CAPEX and OPEX interventions (within the TOTEX context Ofwat requires) and the water sector's commitment to NetZero by 2030, to ultimately protect water quality at the tap in the most sustainable way and save lives.
Start Year 2021
 
Description NBIC FTMA3_21_010 Biofilm Monitoring at Drinking Water Treatment Works: Impact of chlorine on biofilms and water quality (Katherine Fish) 
Organisation Severn Trent Water
Country United Kingdom 
Sector Private 
PI Contribution High quality, clean drinking water is the foundation of public health and hygiene. Biofilms are endemic within drinking water systems, impacting asset performance and water quality. Current microbial monitoring and management (e.g. chlorination) is restricted to analysis of (easily sampled) planktonic microorganisms in the bulk-water, which are unrepresentative of biofilms. Research in idealised systems has shown that biofilms provide protection from disinfection, supporting microbial proliferation. Although critical to managing water safety, monitoring biofilm formation and response to interventions within operational drinking water assets is neglected, primarily due to access and sampling difficulties (without disrupting supply). This FTMA aims to advance the understanding of biofilm growth in operational systems and inform sustainable microbial management approaches by providing a platform to increase porosity of, and leverage value from, interactions between The University of Sheffield (UoS; research) and Severn Trent Water (STW; industry). Specifically, a series of exchange visits will be utilised to design and implement a pilot field-project to detect and monitor biofilm growth throughout a drinking water treatment works (aligning with two NBIC themes). UoS has developed a Biofilm Monitoring Device (BMD) for rapid, sustainable and non-invasive assessment of biofilm (re)formation rates in operational systems, application of this at STW will validate its suitability for field sampling at treatment works. Ultimately, the collaborative relationships established and data generated will support a larger proposal to determine water quality and biofilm responses to changes in chlorine concentration. This will advance biofilm understanding and management, impacting the frequency/intensity of disinfection, thereby reducing energy consumption, time and finance costs whilst reducing quality failures, improving customer service and protecting public health. Thus aligning with the healthy aging and clean growth priorities of Industry Strategy Challenge Fund. Personal development for PI: Expanding professional network, providing a platform to demonstrate research independence and leadership in applied biofilm research.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Feedback from academic: This FTMA provided the opportunity to begin to address an industrial challenge by elevating the technological level of a biofilm-monitoring device that, if proven, will support further key advancements in biofilm and water quality management. Crucially, the visits, collaborative relationships established and pilot work supported by the FTMA highlighted the potential for the application of drinking water BMD to provide better understanding of the interactions between biofilms and water quality. This aligned with an operational need to change chlorine concentrations at a particular site. Subsequently, a 12-month project has been proposed to STW. The proposal aims to determine water quality and biofilm responses to changes in chlorine concentration, simultaneously comparing biofilm growth rates under different chlorine concentrations. This will advance biofilm understanding and management, influencing the frequency/intensity of disinfection, thereby reducing energy consumption, time and finance costs whilst reducing quality failures, improving customer service and protecting public health. Thus aligning with the healthy aging and clean growth priorities of Industry Strategy Challenge Fund. The FTMA has also supported the personal development of the early career PI via expansion and consolidation of a professional network, providing a platform to demonstrate research independence and leadership in applied biofilm research. SPECIFIC OUTPUTS/SUCCESS MEASURES INCLUDE: • Knowledge and skill transfer between sectors: Increased understanding between partners of their perspectives, specifically exchanging STW's practical challenges and expertise and UoS's world-leading research capabilities and expertise. • Successful collaborative relationship: Established foundation with collaborators (and their wider teams). • Developed trust and buy-in from STW treatment works operatives (critical for larger proposals). • Bespoke Biofilm Monitoring Devices designed, built and installed. • Optimisation of sampling methods to detect and monitor biofilms (will be included in a paper, currently in preparation). • 12 month proposal (Total Value: £135K) for a longitudinal biomonitoring project successfully pitched to Severn Trent Water, contracts are currently under negotiation with a view to starting the project May 2022. Future work: The STW (industry) funded project is due to begin in May (subject to contracts being completed). This provides an opportunity to validate the use of the BMDs at a treatment works, monitoring biofilm growth and response to a changing disinfection. The project will evidence the base-line biofilm growth in STW's water treatment works (WTW), providing comparison for assessing impact of interventions on biofilm formation/mobilisation in the WTW and downstream system, and any resulting change in risks to water quality. Thus providing confidence of the actual impacts (if any) of chlorine reduction is on microbial failures risk. Longer term plans includes the BMD uptake by industry, providing invaluable understanding of disinfection practices and their longer-term impact on biofilms and water quality downstream. This will be achieved by continued collaboration between UoS and STW, expanding to include additional water companies, academic institutions and other stakeholders, to help secure funding from UKRI sources. Drawing on NBIC's international links going forward will be invaluable for dissemination of results and developing further collaborative opportunities. FUTURE IMPACTS Outputs will have diverse impacts for water suppliers, regulators, academia and the public. Water quality failures and infrastructure maintenance are economically costly (thousands to millions of pounds) and intrinsically linked to public health - biofilm-associated pathogens cause waterborne illnesses and fatalities. Data generated will enable water utilities to improve biofilm management, rapidly analyse the biological performance of assets and prioritise microbial management in terms of risk return. This includes consideration of the trade-offs between CAPEX and OPEX interventions (within the TOTEX context Ofwat requires) and the water sector's commitment to NetZero by 2030, to ultimately protect water quality at the tap in the most sustainable way and save lives.
Start Year 2021
 
Description NBIC FTMA3_21_010 Biofilm Monitoring at Drinking Water Treatment Works: Impact of chlorine on biofilms and water quality (Katherine Fish) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution High quality, clean drinking water is the foundation of public health and hygiene. Biofilms are endemic within drinking water systems, impacting asset performance and water quality. Current microbial monitoring and management (e.g. chlorination) is restricted to analysis of (easily sampled) planktonic microorganisms in the bulk-water, which are unrepresentative of biofilms. Research in idealised systems has shown that biofilms provide protection from disinfection, supporting microbial proliferation. Although critical to managing water safety, monitoring biofilm formation and response to interventions within operational drinking water assets is neglected, primarily due to access and sampling difficulties (without disrupting supply). This FTMA aims to advance the understanding of biofilm growth in operational systems and inform sustainable microbial management approaches by providing a platform to increase porosity of, and leverage value from, interactions between The University of Sheffield (UoS; research) and Severn Trent Water (STW; industry). Specifically, a series of exchange visits will be utilised to design and implement a pilot field-project to detect and monitor biofilm growth throughout a drinking water treatment works (aligning with two NBIC themes). UoS has developed a Biofilm Monitoring Device (BMD) for rapid, sustainable and non-invasive assessment of biofilm (re)formation rates in operational systems, application of this at STW will validate its suitability for field sampling at treatment works. Ultimately, the collaborative relationships established and data generated will support a larger proposal to determine water quality and biofilm responses to changes in chlorine concentration. This will advance biofilm understanding and management, impacting the frequency/intensity of disinfection, thereby reducing energy consumption, time and finance costs whilst reducing quality failures, improving customer service and protecting public health. Thus aligning with the healthy aging and clean growth priorities of Industry Strategy Challenge Fund. Personal development for PI: Expanding professional network, providing a platform to demonstrate research independence and leadership in applied biofilm research.
Collaborator Contribution Full partners in this Flexible Talent Mobility Account project.
Impact Feedback from academic: This FTMA provided the opportunity to begin to address an industrial challenge by elevating the technological level of a biofilm-monitoring device that, if proven, will support further key advancements in biofilm and water quality management. Crucially, the visits, collaborative relationships established and pilot work supported by the FTMA highlighted the potential for the application of drinking water BMD to provide better understanding of the interactions between biofilms and water quality. This aligned with an operational need to change chlorine concentrations at a particular site. Subsequently, a 12-month project has been proposed to STW. The proposal aims to determine water quality and biofilm responses to changes in chlorine concentration, simultaneously comparing biofilm growth rates under different chlorine concentrations. This will advance biofilm understanding and management, influencing the frequency/intensity of disinfection, thereby reducing energy consumption, time and finance costs whilst reducing quality failures, improving customer service and protecting public health. Thus aligning with the healthy aging and clean growth priorities of Industry Strategy Challenge Fund. The FTMA has also supported the personal development of the early career PI via expansion and consolidation of a professional network, providing a platform to demonstrate research independence and leadership in applied biofilm research. SPECIFIC OUTPUTS/SUCCESS MEASURES INCLUDE: • Knowledge and skill transfer between sectors: Increased understanding between partners of their perspectives, specifically exchanging STW's practical challenges and expertise and UoS's world-leading research capabilities and expertise. • Successful collaborative relationship: Established foundation with collaborators (and their wider teams). • Developed trust and buy-in from STW treatment works operatives (critical for larger proposals). • Bespoke Biofilm Monitoring Devices designed, built and installed. • Optimisation of sampling methods to detect and monitor biofilms (will be included in a paper, currently in preparation). • 12 month proposal (Total Value: £135K) for a longitudinal biomonitoring project successfully pitched to Severn Trent Water, contracts are currently under negotiation with a view to starting the project May 2022. Future work: The STW (industry) funded project is due to begin in May (subject to contracts being completed). This provides an opportunity to validate the use of the BMDs at a treatment works, monitoring biofilm growth and response to a changing disinfection. The project will evidence the base-line biofilm growth in STW's water treatment works (WTW), providing comparison for assessing impact of interventions on biofilm formation/mobilisation in the WTW and downstream system, and any resulting change in risks to water quality. Thus providing confidence of the actual impacts (if any) of chlorine reduction is on microbial failures risk. Longer term plans includes the BMD uptake by industry, providing invaluable understanding of disinfection practices and their longer-term impact on biofilms and water quality downstream. This will be achieved by continued collaboration between UoS and STW, expanding to include additional water companies, academic institutions and other stakeholders, to help secure funding from UKRI sources. Drawing on NBIC's international links going forward will be invaluable for dissemination of results and developing further collaborative opportunities. FUTURE IMPACTS Outputs will have diverse impacts for water suppliers, regulators, academia and the public. Water quality failures and infrastructure maintenance are economically costly (thousands to millions of pounds) and intrinsically linked to public health - biofilm-associated pathogens cause waterborne illnesses and fatalities. Data generated will enable water utilities to improve biofilm management, rapidly analyse the biological performance of assets and prioritise microbial management in terms of risk return. This includes consideration of the trade-offs between CAPEX and OPEX interventions (within the TOTEX context Ofwat requires) and the water sector's commitment to NetZero by 2030, to ultimately protect water quality at the tap in the most sustainable way and save lives.
Start Year 2021
 
Description NBIC FTMA3_21_019 Screening the antimicrobial potential of nanoparticle coatings (Eden Mannix-Fisher) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The primary aim of this project is to produce data on the activity of Pharm2Farm's novel antimicrobial nanoparticle coatings that will be presented at the Nanosynth Expo in March 2022, hosted by the parent company, Nanosynth Group Plc. This will provide an opportunity for Pharm2Farm to showcase their new antimicrobial coatings to potential customers and to seek financial backing for the scale up and registration of the end products. Pharm2Farm have agreed that the research fellow will attend this Expo and contribute to data presentation, which provides an excellent opportunity for the fellow to develop networking skills with members of industry, to understand the needs of the industrial sector and to heighten her commercial awareness. For this project the antimicrobial coatings provided by Pharm2Farm will be screened against environmental and medical pathogens to evaluate the potential application of these materials on surfaces including handles, pipes, and medical device materials. This technology has application across numerous sectors, including but not limited to transportation, food production and medical care. This project aligns to the 'Healthy Ageing' challenge as one of the greatest risks to healthy ageing is infection. Infections, particularly those caused by antimicrobial resistant bacteria can have a severe impact on health and can regularly be acquired as comorbidities in hospital settings. This can be through contact with surfaces and via indwelling medical devices that pathogens readily colonise. As such, there is an increasing focus on the use of antimicrobial coatings on medical device materials and in the wider healthcare setting on items from identity wrist bands to door handles and indwelling medical devices. The project also aligns to the 'Transforming Food Production' challenge as antimicrobial coatings can be applied in agriculture, food packaging and livestock pipelines to prevent contamination of food products, increasing the efficiency and resilience of food production.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: This work demonstrated that the antimicrobial nanoparticles mixed into paint had a significant reduction of the bacterial viability after exposure of under three hours (Figure 2). This data is important for Pharm2Farm as they can provide data to their international customer evidencing that paint formulations can be made antimicrobial. Building on this project, Pharm2Farm will now go forward with antiviral testing of the paint. This project has provided data for our collaborator, Pharm2Farm, that can be supplied to AkzoNobel and has resulted in further commercial income for the former. It also brings the antimicrobial paint under development closer to commercialisation for AkzoNobel and provides Pharm2Farm with further evidence of the antimicrobial activity of their nanoparticles for advertisement to other potential clients. This project has provided Eden Mannix-Fisher with significant commercial insight and experience of working with industry partners, allowing her to better understand the ways in which both academia and industry operate. Dr Mannix-Fisher will also showcase the work produced here at the postponed NanoSynth Expo rescheduled for summer 2022. Potential patent: The work carried out in this secondment will have great impact to Pharm2Farm and their customer AksoNobel. The antimicrobial work carried out will complement the antiviral work carried out and should both be successful, the data will go towards producing a patent for the product produced. This was not mentioned in the patents section as this patent has not yet been published as it depends on the data produced. Future work: Pharm2Farm will undertake the antiviral work on the antimicrobial paint via a pre-existing collaboration. Pharm2Farm have stated that if they require further antibacterial testing of this or other antimicrobial technologies, they are likely to reach out to this academic team to 'buy out' time to support the work. This further develops the collaboration between the microbiology team at NTU and the SME Pharm2Farm.
Start Year 2021
 
Description NBIC FTMA3_21_019 Screening the antimicrobial potential of nanoparticle coatings (Eden Mannix-Fisher) 
Organisation Nottingham Trent University
Country United Kingdom 
Sector Academic/University 
PI Contribution The primary aim of this project is to produce data on the activity of Pharm2Farm's novel antimicrobial nanoparticle coatings that will be presented at the Nanosynth Expo in March 2022, hosted by the parent company, Nanosynth Group Plc. This will provide an opportunity for Pharm2Farm to showcase their new antimicrobial coatings to potential customers and to seek financial backing for the scale up and registration of the end products. Pharm2Farm have agreed that the research fellow will attend this Expo and contribute to data presentation, which provides an excellent opportunity for the fellow to develop networking skills with members of industry, to understand the needs of the industrial sector and to heighten her commercial awareness. For this project the antimicrobial coatings provided by Pharm2Farm will be screened against environmental and medical pathogens to evaluate the potential application of these materials on surfaces including handles, pipes, and medical device materials. This technology has application across numerous sectors, including but not limited to transportation, food production and medical care. This project aligns to the 'Healthy Ageing' challenge as one of the greatest risks to healthy ageing is infection. Infections, particularly those caused by antimicrobial resistant bacteria can have a severe impact on health and can regularly be acquired as comorbidities in hospital settings. This can be through contact with surfaces and via indwelling medical devices that pathogens readily colonise. As such, there is an increasing focus on the use of antimicrobial coatings on medical device materials and in the wider healthcare setting on items from identity wrist bands to door handles and indwelling medical devices. The project also aligns to the 'Transforming Food Production' challenge as antimicrobial coatings can be applied in agriculture, food packaging and livestock pipelines to prevent contamination of food products, increasing the efficiency and resilience of food production.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: This work demonstrated that the antimicrobial nanoparticles mixed into paint had a significant reduction of the bacterial viability after exposure of under three hours (Figure 2). This data is important for Pharm2Farm as they can provide data to their international customer evidencing that paint formulations can be made antimicrobial. Building on this project, Pharm2Farm will now go forward with antiviral testing of the paint. This project has provided data for our collaborator, Pharm2Farm, that can be supplied to AkzoNobel and has resulted in further commercial income for the former. It also brings the antimicrobial paint under development closer to commercialisation for AkzoNobel and provides Pharm2Farm with further evidence of the antimicrobial activity of their nanoparticles for advertisement to other potential clients. This project has provided Eden Mannix-Fisher with significant commercial insight and experience of working with industry partners, allowing her to better understand the ways in which both academia and industry operate. Dr Mannix-Fisher will also showcase the work produced here at the postponed NanoSynth Expo rescheduled for summer 2022. Potential patent: The work carried out in this secondment will have great impact to Pharm2Farm and their customer AksoNobel. The antimicrobial work carried out will complement the antiviral work carried out and should both be successful, the data will go towards producing a patent for the product produced. This was not mentioned in the patents section as this patent has not yet been published as it depends on the data produced. Future work: Pharm2Farm will undertake the antiviral work on the antimicrobial paint via a pre-existing collaboration. Pharm2Farm have stated that if they require further antibacterial testing of this or other antimicrobial technologies, they are likely to reach out to this academic team to 'buy out' time to support the work. This further develops the collaboration between the microbiology team at NTU and the SME Pharm2Farm.
Start Year 2021
 
Description NBIC FTMA3_21_021 Novel Antibiofilm Nanocomposite Functionalities for Metal Implants (NANOMI) (Faradin Mirkhalaf) 
Organisation Liverpool School of Tropical Medicine
Country United Kingdom 
Sector Academic/University 
PI Contribution In the proposed secondment at Liverpool School of Tropical Medicine (LSTM), we aim to create, characterise and measure the anti-Biofilm properties of novel nanocomposite surfaces developed by Shimyatech. The proposed work builds upon a preliminary study carried out by the main applicant with LSTM which was funded through the European Regional Development Fund (ERDF). Different functional nanocomposites will be electrochemically, and chemically, attached to metallic surfaces and antibiofilm properties of these composites compared with one another with the focus on composite use in prosthetic Total Joint Replacements (TJRs). This secondment will increase our expertise and understanding of the microbiology and measurement of biofilm development and inhibition, which are a strategic focus in Shimyatech's R&D ventures (i.e. antibacterial, antibiofilm, antiviral properties). Many Western countries face an aging population and increased prevalence of TJRs which is accompanied by increasing rate of Prosthetic joint infections (PJIs). TJR procedures have been increasingly employed as a strategy to improve mobility in older age. TJR, caused by microbial contamination during surgery, are devastating complications of TJRs and are related to high levels of morbidity and mortality. The economic burden on healthcare systems for the treatment of PJIs is vast, exacerbated by increasing rates of antimicrobial resistance to drugs usually used to treat them. There is, therefore, an urgent need for the development of new, material-based solutions to reduce PJIs for the protection of our national healthcare system and patients and this unmet need is something we are well placed to address. The project aligns well with the ICSF challenge "Healthy ageing", which places emphasis on the importance of remaining active, productive and independent in old age. In an ageing population the reduction of PJIs is a major factor in improving the quality of life and independence of elderly individuals.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from Shimyatech: This project represents the early stages of a translational outcome for Shimyatech, advancing the devised technology from a laboratory scale experimental project to real-world product used in a medical setting. • The developed technology was tested on metals frequently used for medical implants (i.e. Titanium and Stainless Steel) giving us results translatable to the technologies real-world use case. The use of the Liverpool biofilm device (LBD) provided by LSTM also allowed us to emulate in vitro conditions more accurately than using standard assays. A major outcome in this project included advancing the "Technology readiness level" (TRL) of the functionalisation method. We can be considered to have advanced the TRL from stage 2 to around stage 3 'Experimental proof-of-concept' as an experimental protocol was defined and has commenced being used for the technologies efficacy validation. More experimental studies are required (i.e. with sample sizes n=10+) to advance the TRL to stage 4 where high level optimisation will take place, and the early stages of how this can be achieved was defined in this project. • The project created an opportunity for LSTM to test its Liverpool Biofilm Device (LBD) against a standard well assay. as a part of this project Advantages of the LBD compared to the standard assay were demonstrated. LSTM hopes this will lead to IP registration and paper publication. • The modified slides were characterised with surface analytical techniques (FT-IR, Contact angle, SEM, EDS and XPS) to confirm the presence and structure of coated materials. • The commercialisation and exploitation of the new technology for various products including medical implants, frequently touched metal surfaces in public places, fabrics and textiles, wound care and filters are planned by Shimyatech Ltd. • The project supported to start and maintain a strong collaboration between Shimyatech Ltd, LSTM, Liverpool University and Keele University and the consortium aims to continue their collaboration to apply for further research funding and publish the results in this project. • Multidisciplinary training of Shimyatech employee whom is a Chemical Engineer by trade but was trained in microbiological techniques, including bacterial culture in both liquid and solid media, aseptic technique, biofilm staining and solubilisation, 24 hour growth curves, and usage of specialised equipment (plate readers, Clariostars) to the extent of being completely self-sufficient with no requirement of supervision. • The project provided precursor data which could support a future grant application or publication which could potentially benefit Shimyatech LTD in future stages of the products development. • This project created an opportunity to exchange knowledge and experience between the R&D company and LSTM to acquire microbiology, biofilm testing, nanocoatings and chemistry of surfaces and their applications in certain areas. This was also supported by effective communications and group meetings. Further work: Following this project, Shimyatech Ltd and LSTM are now in a position to proceed with further advancement of the technology leading to the exploitation and dissemination of the results. In the near future, we are aiming to: • File a patent based on the previously developed technology, the results in this project can support the considered application in medical devices. • Jointly publish the bulk of the results in the corresponding leading journals. • Apply for further funding to advance TRL of the project leading to commercialisation of new products. • Shimyatech Ltd has recently approached LCR ventures for possible support and capital investment on the products. This requires TRL at a higher TRL (5,6) to achieve. We are going to apply to suitable calls for funding to national and EU funding bodies. A local organisation (LYVALABS) and Innovate UK EDGE have been approached to seek support for commercialisation and funding applications. We are hoping that NBIC is able to further support this project to achieve its final goals including further grant applications, networking with members and approaching medical device manufacturers and industries leading to the commercialisation of the products.
Start Year 2021
 
Description NBIC FTMA3_21_021 Novel Antibiofilm Nanocomposite Functionalities for Metal Implants (NANOMI) (Faradin Mirkhalaf) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution In the proposed secondment at Liverpool School of Tropical Medicine (LSTM), we aim to create, characterise and measure the anti-Biofilm properties of novel nanocomposite surfaces developed by Shimyatech. The proposed work builds upon a preliminary study carried out by the main applicant with LSTM which was funded through the European Regional Development Fund (ERDF). Different functional nanocomposites will be electrochemically, and chemically, attached to metallic surfaces and antibiofilm properties of these composites compared with one another with the focus on composite use in prosthetic Total Joint Replacements (TJRs). This secondment will increase our expertise and understanding of the microbiology and measurement of biofilm development and inhibition, which are a strategic focus in Shimyatech's R&D ventures (i.e. antibacterial, antibiofilm, antiviral properties). Many Western countries face an aging population and increased prevalence of TJRs which is accompanied by increasing rate of Prosthetic joint infections (PJIs). TJR procedures have been increasingly employed as a strategy to improve mobility in older age. TJR, caused by microbial contamination during surgery, are devastating complications of TJRs and are related to high levels of morbidity and mortality. The economic burden on healthcare systems for the treatment of PJIs is vast, exacerbated by increasing rates of antimicrobial resistance to drugs usually used to treat them. There is, therefore, an urgent need for the development of new, material-based solutions to reduce PJIs for the protection of our national healthcare system and patients and this unmet need is something we are well placed to address. The project aligns well with the ICSF challenge "Healthy ageing", which places emphasis on the importance of remaining active, productive and independent in old age. In an ageing population the reduction of PJIs is a major factor in improving the quality of life and independence of elderly individuals.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from Shimyatech: This project represents the early stages of a translational outcome for Shimyatech, advancing the devised technology from a laboratory scale experimental project to real-world product used in a medical setting. • The developed technology was tested on metals frequently used for medical implants (i.e. Titanium and Stainless Steel) giving us results translatable to the technologies real-world use case. The use of the Liverpool biofilm device (LBD) provided by LSTM also allowed us to emulate in vitro conditions more accurately than using standard assays. A major outcome in this project included advancing the "Technology readiness level" (TRL) of the functionalisation method. We can be considered to have advanced the TRL from stage 2 to around stage 3 'Experimental proof-of-concept' as an experimental protocol was defined and has commenced being used for the technologies efficacy validation. More experimental studies are required (i.e. with sample sizes n=10+) to advance the TRL to stage 4 where high level optimisation will take place, and the early stages of how this can be achieved was defined in this project. • The project created an opportunity for LSTM to test its Liverpool Biofilm Device (LBD) against a standard well assay. as a part of this project Advantages of the LBD compared to the standard assay were demonstrated. LSTM hopes this will lead to IP registration and paper publication. • The modified slides were characterised with surface analytical techniques (FT-IR, Contact angle, SEM, EDS and XPS) to confirm the presence and structure of coated materials. • The commercialisation and exploitation of the new technology for various products including medical implants, frequently touched metal surfaces in public places, fabrics and textiles, wound care and filters are planned by Shimyatech Ltd. • The project supported to start and maintain a strong collaboration between Shimyatech Ltd, LSTM, Liverpool University and Keele University and the consortium aims to continue their collaboration to apply for further research funding and publish the results in this project. • Multidisciplinary training of Shimyatech employee whom is a Chemical Engineer by trade but was trained in microbiological techniques, including bacterial culture in both liquid and solid media, aseptic technique, biofilm staining and solubilisation, 24 hour growth curves, and usage of specialised equipment (plate readers, Clariostars) to the extent of being completely self-sufficient with no requirement of supervision. • The project provided precursor data which could support a future grant application or publication which could potentially benefit Shimyatech LTD in future stages of the products development. • This project created an opportunity to exchange knowledge and experience between the R&D company and LSTM to acquire microbiology, biofilm testing, nanocoatings and chemistry of surfaces and their applications in certain areas. This was also supported by effective communications and group meetings. Further work: Following this project, Shimyatech Ltd and LSTM are now in a position to proceed with further advancement of the technology leading to the exploitation and dissemination of the results. In the near future, we are aiming to: • File a patent based on the previously developed technology, the results in this project can support the considered application in medical devices. • Jointly publish the bulk of the results in the corresponding leading journals. • Apply for further funding to advance TRL of the project leading to commercialisation of new products. • Shimyatech Ltd has recently approached LCR ventures for possible support and capital investment on the products. This requires TRL at a higher TRL (5,6) to achieve. We are going to apply to suitable calls for funding to national and EU funding bodies. A local organisation (LYVALABS) and Innovate UK EDGE have been approached to seek support for commercialisation and funding applications. We are hoping that NBIC is able to further support this project to achieve its final goals including further grant applications, networking with members and approaching medical device manufacturers and industries leading to the commercialisation of the products.
Start Year 2021
 
Description NBIC FTMA3_21_021 Novel Antibiofilm Nanocomposite Functionalities for Metal Implants (NANOMI) (Faradin Mirkhalaf) 
Organisation ShimyaTech Ltd
Country United Kingdom 
Sector Private 
PI Contribution In the proposed secondment at Liverpool School of Tropical Medicine (LSTM), we aim to create, characterise and measure the anti-Biofilm properties of novel nanocomposite surfaces developed by Shimyatech. The proposed work builds upon a preliminary study carried out by the main applicant with LSTM which was funded through the European Regional Development Fund (ERDF). Different functional nanocomposites will be electrochemically, and chemically, attached to metallic surfaces and antibiofilm properties of these composites compared with one another with the focus on composite use in prosthetic Total Joint Replacements (TJRs). This secondment will increase our expertise and understanding of the microbiology and measurement of biofilm development and inhibition, which are a strategic focus in Shimyatech's R&D ventures (i.e. antibacterial, antibiofilm, antiviral properties). Many Western countries face an aging population and increased prevalence of TJRs which is accompanied by increasing rate of Prosthetic joint infections (PJIs). TJR procedures have been increasingly employed as a strategy to improve mobility in older age. TJR, caused by microbial contamination during surgery, are devastating complications of TJRs and are related to high levels of morbidity and mortality. The economic burden on healthcare systems for the treatment of PJIs is vast, exacerbated by increasing rates of antimicrobial resistance to drugs usually used to treat them. There is, therefore, an urgent need for the development of new, material-based solutions to reduce PJIs for the protection of our national healthcare system and patients and this unmet need is something we are well placed to address. The project aligns well with the ICSF challenge "Healthy ageing", which places emphasis on the importance of remaining active, productive and independent in old age. In an ageing population the reduction of PJIs is a major factor in improving the quality of life and independence of elderly individuals.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from Shimyatech: This project represents the early stages of a translational outcome for Shimyatech, advancing the devised technology from a laboratory scale experimental project to real-world product used in a medical setting. • The developed technology was tested on metals frequently used for medical implants (i.e. Titanium and Stainless Steel) giving us results translatable to the technologies real-world use case. The use of the Liverpool biofilm device (LBD) provided by LSTM also allowed us to emulate in vitro conditions more accurately than using standard assays. A major outcome in this project included advancing the "Technology readiness level" (TRL) of the functionalisation method. We can be considered to have advanced the TRL from stage 2 to around stage 3 'Experimental proof-of-concept' as an experimental protocol was defined and has commenced being used for the technologies efficacy validation. More experimental studies are required (i.e. with sample sizes n=10+) to advance the TRL to stage 4 where high level optimisation will take place, and the early stages of how this can be achieved was defined in this project. • The project created an opportunity for LSTM to test its Liverpool Biofilm Device (LBD) against a standard well assay. as a part of this project Advantages of the LBD compared to the standard assay were demonstrated. LSTM hopes this will lead to IP registration and paper publication. • The modified slides were characterised with surface analytical techniques (FT-IR, Contact angle, SEM, EDS and XPS) to confirm the presence and structure of coated materials. • The commercialisation and exploitation of the new technology for various products including medical implants, frequently touched metal surfaces in public places, fabrics and textiles, wound care and filters are planned by Shimyatech Ltd. • The project supported to start and maintain a strong collaboration between Shimyatech Ltd, LSTM, Liverpool University and Keele University and the consortium aims to continue their collaboration to apply for further research funding and publish the results in this project. • Multidisciplinary training of Shimyatech employee whom is a Chemical Engineer by trade but was trained in microbiological techniques, including bacterial culture in both liquid and solid media, aseptic technique, biofilm staining and solubilisation, 24 hour growth curves, and usage of specialised equipment (plate readers, Clariostars) to the extent of being completely self-sufficient with no requirement of supervision. • The project provided precursor data which could support a future grant application or publication which could potentially benefit Shimyatech LTD in future stages of the products development. • This project created an opportunity to exchange knowledge and experience between the R&D company and LSTM to acquire microbiology, biofilm testing, nanocoatings and chemistry of surfaces and their applications in certain areas. This was also supported by effective communications and group meetings. Further work: Following this project, Shimyatech Ltd and LSTM are now in a position to proceed with further advancement of the technology leading to the exploitation and dissemination of the results. In the near future, we are aiming to: • File a patent based on the previously developed technology, the results in this project can support the considered application in medical devices. • Jointly publish the bulk of the results in the corresponding leading journals. • Apply for further funding to advance TRL of the project leading to commercialisation of new products. • Shimyatech Ltd has recently approached LCR ventures for possible support and capital investment on the products. This requires TRL at a higher TRL (5,6) to achieve. We are going to apply to suitable calls for funding to national and EU funding bodies. A local organisation (LYVALABS) and Innovate UK EDGE have been approached to seek support for commercialisation and funding applications. We are hoping that NBIC is able to further support this project to achieve its final goals including further grant applications, networking with members and approaching medical device manufacturers and industries leading to the commercialisation of the products.
Start Year 2021
 
Description NBIC FTMA3_21_023 Decarbonising Wastewater Treatment using Microbial Electrochemical Technologies (METs): A research into the UK Water Industry Expectations and Needs (Pavlina Theodosiou) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Microbial electrochemical biofilms produce a suit of technologies that could bring the water sector to Net-Zero by recovering electricity and hydrogen from wastewater treatment. My research to date using METs has seen me: deliver low-cost sanitation with self-generated lighting in Africa (OXFAM & BMG Foundation); produce power from urine at Glastonbury Festival (BMG Foundation); 3D-print entire stackable microbial electrochemical reactors and control them robotically (FP-7); enthuse school children in generating electricity from waste using electroactive biofilms (NBIC); and currently work in projects aiming to produce hydrogen from wastewater using a combination of modelling (NBIC) and large-scale pilot MET reactors (EPSCR). I aim to become a world leading researcher working at the interface between academia and industry. I want to revolutionise the wastewater sector into an energy producer not consumer, aligning with the Clean Growth challenge theme of the ISCF, facilitating this in the UK but also in places where sanitation is currently unaffordable and unsustainable. Water companies are inherently risk-averse, hence gaining impact and in-road into this sector is proving extremely challenging. Through this secondment within the environmental consultancy Royal Haskoning DHV, I aim to build the correct skillset and an improved network to undertake market research within water companies. This market research will help us understand better the industry's demands and expectations (regarding performance and Return on Investment), enabling us to package and develop MET systems to better suit their needs. RHDHV has a proven track record in collaborating with academia to develop new technology and processes through piloting and commercialisation. This model has worked extremely well in the Netherlands, where cutting-edge wastewater and anaerobic digestion technologies were developed in collaboration with Dutch research institutes. RHDHV aims to replicate this success in the UK water sector, and hence this collaboration is extremely timely.
Collaborator Contribution Newcastle University: I have been contributing to bid development meetings with other consultancy firms and water companies. Royal HaskoningDHV: The partner has been contributing to my professional development and has been helping me in building connections with their existing network of clients and collaborators.
Impact Outcomes/Achievements: - Getting experience working in an engineering consultancy on the business development site of emerging technologies. - Built a business case in collaboration with RHDHV on MECs for wastewater treatment plants (WWTPs) that have a Thermal Hydrolysis Process (THPs), using the NWL Howdon WWTP as the case study and the MEC pilots operated at Howdon by Newcastle University as the reference points. - Identified a new pathway for MECs which was not considered before and explored this further. This new pathway can make the MEC technology better suited for the UK and international market and improve wastewater resource recovery, helping water companies in their NetZero endeavour. - Developed understanding of the information needed in terms of cost and maintenance numbers, and ROI for building confidence around an emerging technology to prospective clients (i.e. water companies) Impact: - Broaden Pavlina's horizons in emerging technologies for wastewater treatment and the imminent issues we need to tackle to reduce carbon emissions and reach NetZero - Learnt how to cost a project, calculate ROIs, OPEX, CAPEX - Helped Pavlina understand what a process engineer and consultant career entails and realise that she is interested in pursuing a career path outside academia and, more specifically, in the water sector - RHDHV benefited from this project by getting in touch with a technology we are not familiar with and discovered the potential benefits of it that can contribute to solve some major challenges the water industry is facing. Direct next steps: - Secured £20k funding to start in May the Biofilms iCure Sprint to take this project to the next level by validating the technology through market research - Arranged meetings with Innovation Managers from 3 water companies: NWL, SevernTrent and Scottish Water and present to them the business case to raise awareness about this technology, its prospects and get interest for possible future funding - Submitting a proposal to EBNET for a proof-of-concept project based on the new technology pathway towards ammonia recovery that was discovered throughout this project - Organising an Industry Technical Visit/Event in collaboration with the Institute of Water to the BeWise Facility that currently houses the 3 Pilot scale MEC reactors in order to promote the technology to water companies and the supply chain - Submitted an abstract to the ISMET 8 conference regarding the outcomes of this project and the lessons learnt
Start Year 2022
 
Description NBIC FTMA3_21_023 Decarbonising Wastewater Treatment using Microbial Electrochemical Technologies (METs): A research into the UK Water Industry Expectations and Needs (Pavlina Theodosiou) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution Microbial electrochemical biofilms produce a suit of technologies that could bring the water sector to Net-Zero by recovering electricity and hydrogen from wastewater treatment. My research to date using METs has seen me: deliver low-cost sanitation with self-generated lighting in Africa (OXFAM & BMG Foundation); produce power from urine at Glastonbury Festival (BMG Foundation); 3D-print entire stackable microbial electrochemical reactors and control them robotically (FP-7); enthuse school children in generating electricity from waste using electroactive biofilms (NBIC); and currently work in projects aiming to produce hydrogen from wastewater using a combination of modelling (NBIC) and large-scale pilot MET reactors (EPSCR). I aim to become a world leading researcher working at the interface between academia and industry. I want to revolutionise the wastewater sector into an energy producer not consumer, aligning with the Clean Growth challenge theme of the ISCF, facilitating this in the UK but also in places where sanitation is currently unaffordable and unsustainable. Water companies are inherently risk-averse, hence gaining impact and in-road into this sector is proving extremely challenging. Through this secondment within the environmental consultancy Royal Haskoning DHV, I aim to build the correct skillset and an improved network to undertake market research within water companies. This market research will help us understand better the industry's demands and expectations (regarding performance and Return on Investment), enabling us to package and develop MET systems to better suit their needs. RHDHV has a proven track record in collaborating with academia to develop new technology and processes through piloting and commercialisation. This model has worked extremely well in the Netherlands, where cutting-edge wastewater and anaerobic digestion technologies were developed in collaboration with Dutch research institutes. RHDHV aims to replicate this success in the UK water sector, and hence this collaboration is extremely timely.
Collaborator Contribution Newcastle University: I have been contributing to bid development meetings with other consultancy firms and water companies. Royal HaskoningDHV: The partner has been contributing to my professional development and has been helping me in building connections with their existing network of clients and collaborators.
Impact Outcomes/Achievements: - Getting experience working in an engineering consultancy on the business development site of emerging technologies. - Built a business case in collaboration with RHDHV on MECs for wastewater treatment plants (WWTPs) that have a Thermal Hydrolysis Process (THPs), using the NWL Howdon WWTP as the case study and the MEC pilots operated at Howdon by Newcastle University as the reference points. - Identified a new pathway for MECs which was not considered before and explored this further. This new pathway can make the MEC technology better suited for the UK and international market and improve wastewater resource recovery, helping water companies in their NetZero endeavour. - Developed understanding of the information needed in terms of cost and maintenance numbers, and ROI for building confidence around an emerging technology to prospective clients (i.e. water companies) Impact: - Broaden Pavlina's horizons in emerging technologies for wastewater treatment and the imminent issues we need to tackle to reduce carbon emissions and reach NetZero - Learnt how to cost a project, calculate ROIs, OPEX, CAPEX - Helped Pavlina understand what a process engineer and consultant career entails and realise that she is interested in pursuing a career path outside academia and, more specifically, in the water sector - RHDHV benefited from this project by getting in touch with a technology we are not familiar with and discovered the potential benefits of it that can contribute to solve some major challenges the water industry is facing. Direct next steps: - Secured £20k funding to start in May the Biofilms iCure Sprint to take this project to the next level by validating the technology through market research - Arranged meetings with Innovation Managers from 3 water companies: NWL, SevernTrent and Scottish Water and present to them the business case to raise awareness about this technology, its prospects and get interest for possible future funding - Submitting a proposal to EBNET for a proof-of-concept project based on the new technology pathway towards ammonia recovery that was discovered throughout this project - Organising an Industry Technical Visit/Event in collaboration with the Institute of Water to the BeWise Facility that currently houses the 3 Pilot scale MEC reactors in order to promote the technology to water companies and the supply chain - Submitted an abstract to the ISMET 8 conference regarding the outcomes of this project and the lessons learnt
Start Year 2022
 
Description NBIC FTMA3_21_023 Decarbonising Wastewater Treatment using Microbial Electrochemical Technologies (METs): A research into the UK Water Industry Expectations and Needs (Pavlina Theodosiou) 
Organisation Royal HaskoningDHV
Country United Kingdom 
Sector Private 
PI Contribution Microbial electrochemical biofilms produce a suit of technologies that could bring the water sector to Net-Zero by recovering electricity and hydrogen from wastewater treatment. My research to date using METs has seen me: deliver low-cost sanitation with self-generated lighting in Africa (OXFAM & BMG Foundation); produce power from urine at Glastonbury Festival (BMG Foundation); 3D-print entire stackable microbial electrochemical reactors and control them robotically (FP-7); enthuse school children in generating electricity from waste using electroactive biofilms (NBIC); and currently work in projects aiming to produce hydrogen from wastewater using a combination of modelling (NBIC) and large-scale pilot MET reactors (EPSCR). I aim to become a world leading researcher working at the interface between academia and industry. I want to revolutionise the wastewater sector into an energy producer not consumer, aligning with the Clean Growth challenge theme of the ISCF, facilitating this in the UK but also in places where sanitation is currently unaffordable and unsustainable. Water companies are inherently risk-averse, hence gaining impact and in-road into this sector is proving extremely challenging. Through this secondment within the environmental consultancy Royal Haskoning DHV, I aim to build the correct skillset and an improved network to undertake market research within water companies. This market research will help us understand better the industry's demands and expectations (regarding performance and Return on Investment), enabling us to package and develop MET systems to better suit their needs. RHDHV has a proven track record in collaborating with academia to develop new technology and processes through piloting and commercialisation. This model has worked extremely well in the Netherlands, where cutting-edge wastewater and anaerobic digestion technologies were developed in collaboration with Dutch research institutes. RHDHV aims to replicate this success in the UK water sector, and hence this collaboration is extremely timely.
Collaborator Contribution Newcastle University: I have been contributing to bid development meetings with other consultancy firms and water companies. Royal HaskoningDHV: The partner has been contributing to my professional development and has been helping me in building connections with their existing network of clients and collaborators.
Impact Outcomes/Achievements: - Getting experience working in an engineering consultancy on the business development site of emerging technologies. - Built a business case in collaboration with RHDHV on MECs for wastewater treatment plants (WWTPs) that have a Thermal Hydrolysis Process (THPs), using the NWL Howdon WWTP as the case study and the MEC pilots operated at Howdon by Newcastle University as the reference points. - Identified a new pathway for MECs which was not considered before and explored this further. This new pathway can make the MEC technology better suited for the UK and international market and improve wastewater resource recovery, helping water companies in their NetZero endeavour. - Developed understanding of the information needed in terms of cost and maintenance numbers, and ROI for building confidence around an emerging technology to prospective clients (i.e. water companies) Impact: - Broaden Pavlina's horizons in emerging technologies for wastewater treatment and the imminent issues we need to tackle to reduce carbon emissions and reach NetZero - Learnt how to cost a project, calculate ROIs, OPEX, CAPEX - Helped Pavlina understand what a process engineer and consultant career entails and realise that she is interested in pursuing a career path outside academia and, more specifically, in the water sector - RHDHV benefited from this project by getting in touch with a technology we are not familiar with and discovered the potential benefits of it that can contribute to solve some major challenges the water industry is facing. Direct next steps: - Secured £20k funding to start in May the Biofilms iCure Sprint to take this project to the next level by validating the technology through market research - Arranged meetings with Innovation Managers from 3 water companies: NWL, SevernTrent and Scottish Water and present to them the business case to raise awareness about this technology, its prospects and get interest for possible future funding - Submitting a proposal to EBNET for a proof-of-concept project based on the new technology pathway towards ammonia recovery that was discovered throughout this project - Organising an Industry Technical Visit/Event in collaboration with the Institute of Water to the BeWise Facility that currently houses the 3 Pilot scale MEC reactors in order to promote the technology to water companies and the supply chain - Submitted an abstract to the ISMET 8 conference regarding the outcomes of this project and the lessons learnt
Start Year 2022
 
Description NBIC FTMA3_21_026 Nano-modification of textile surface with antimicrobial and antibiofilm features for wound dressing (Ying Yang) 
Organisation Keele University
Country United Kingdom 
Sector Academic/University 
PI Contribution This FTMA application addresses the 'Aging society' challenge outlined in the UKRI's Industry Strategy, specifically on management of chronic wounds. In the current society with its aging population, chronic wounds such as diabetic ulcers, venous leg ulcers are an increasingly medical concern. Without skin protection and priming with blood and constant interstitial fluid, the wound offers an optimal environment for bacteria growth and biofilm formation. Biofilm development in wounds is now recognized not only as a precursor to infection but also as a cause of delayed healing. Development of a robust anti-biofilm wound dressing can address this challenge and improve quality of life in an aging population. In the past years, our group and the industrial partner, ShimyaTech, have developed novel techniques to fight biofilms. In Keele, we have isolated new antimicrobial peptides (AMP) from plant, bacteria, and designed synthetic biomimetic AMP for surface modification with new coupling methods for the robust attachment of AMP to metallic surfaces. ShimyaTech has established new processing techniques for incorporation of bactericide nanoparticles onto surfaces by electro- or electroless deposition approaches. The aim of this project is to combine the anti-biofilm strategies, highlighted above, for textile surface treatment into a new type of wound dressing material. This will be achieved through ShimyaTech-based secondment with the following objectives: 1) Optimize electroless deposition approach to introduce gold or silver nanoparticles onto textile surfaces, e.g. cotton, sodium carboxymethylcellulose 2) Covalently bind two AMPs (nisin, a plant cyclotide) to the textile surface through new coupling agent, diazonium, or gold nanoparticles 3) Assess and compare the anti-biofilm capacity of the new wound dressing We anticipate the secondment will not only generate proof-of-concept data for the dual treatment technique for future UKRI grant application, but also will greatly enhance the industrialized perspective and cross-sector skill for the nominated postdoctoral fellow.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: The main aims that were addressed and outcomes achieved through the completion of this collaborative project were: 1. Define and refine techniques to incorporate silver and gold nanoparticles onto fabrics Active functionalising agents were synthesised and subsequently used to functionalise wound dressings to act as templates to facilitate the binding of silver/gold nanoparticles. Different functionalities were tested including carboxyl, nitro and amino groups as part of the refinement process to enhance grafting efficiency and anti-microbial action. The incorporation of different chemical functionalities had a direct impact on the subsequent binding of gold/silver nanoparticles. Standardised protocols have been developed for these procedures to achieve reproducible functionalised fabrics for testing purposes. New active functionalities were produced which we aim to publish in scientific journals and form the basis of the IP surrounding functionalisation. 2. Optimize the electro/electroless deposition approaches to introduce silver or gold nanoparticles onto textile surfaces Electrodeposition is routinely used in the industrial manufacturing processes but typically used to introduce metals on the surface of solid metallic surfaces. This approach was trialled to facilitate metal nanoparticle deposition on the surface of non-conductive materials (wound dressings). This technology circumvents the use of strong reducing agents traditionally used which are harmful to health and to the environment. Significant cost savings are achieved through this approach with the much-reduced amounts of metal salts needed for the production of the anti-biofilm wound dressings. 3. Assess and compare the anti-biofilm capacity of the new wound dressing A range of modified fabrics were produced with different functionalities and subsequent methods of silver nanoparticle attachment. Anti-biofilm testing at The Liverpool School of Tropical Medicine for two bacterial strains of significant medical interest: Pseudomonas aeruginosa and MRSA showed very promising results for the effectiveness of the modified wound dressings. Bacterial growth was seen to be inhibited in all silver modified wound dressings compared to controls, however, specific functionalities used to bind silver nanoparticles to the wound dressings were shown to be particularly effective in eliminating bacteria based on absorption readings of overnight cultures. Future work: Following the completion of proof-of-principle studies, optimisations including the incorporation of antimicrobial peptides (AMPs) will be trialled. These studies are aimed to assess a potential further improvement of the antibiofilm wound dressings and to assess any additive effects of dual AMP/silver/gold fabrics. Further anti-biofilm testing would be implemented. The next step in the development of the anti-biofilm wound dressings include biocompatibility testing which will be conducted through in vitro cell cultures and metabolic assays to identify and cytotoxic effects. Conversations will now be sought with clinical personnel to help in the development of the wound dressings to aid in the design to have the most significant impact based on clinical needs. The new collaboration consortium comprising Keele University, Shimyatech and The Liverpool School of Tropical Medicine has been established to apply for new grant application. We are working on protection of IP, generation of at least one publication and preparation of further grant funding applications.
Start Year 2021
 
Description NBIC FTMA3_21_026 Nano-modification of textile surface with antimicrobial and antibiofilm features for wound dressing (Ying Yang) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This FTMA application addresses the 'Aging society' challenge outlined in the UKRI's Industry Strategy, specifically on management of chronic wounds. In the current society with its aging population, chronic wounds such as diabetic ulcers, venous leg ulcers are an increasingly medical concern. Without skin protection and priming with blood and constant interstitial fluid, the wound offers an optimal environment for bacteria growth and biofilm formation. Biofilm development in wounds is now recognized not only as a precursor to infection but also as a cause of delayed healing. Development of a robust anti-biofilm wound dressing can address this challenge and improve quality of life in an aging population. In the past years, our group and the industrial partner, ShimyaTech, have developed novel techniques to fight biofilms. In Keele, we have isolated new antimicrobial peptides (AMP) from plant, bacteria, and designed synthetic biomimetic AMP for surface modification with new coupling methods for the robust attachment of AMP to metallic surfaces. ShimyaTech has established new processing techniques for incorporation of bactericide nanoparticles onto surfaces by electro- or electroless deposition approaches. The aim of this project is to combine the anti-biofilm strategies, highlighted above, for textile surface treatment into a new type of wound dressing material. This will be achieved through ShimyaTech-based secondment with the following objectives: 1) Optimize electroless deposition approach to introduce gold or silver nanoparticles onto textile surfaces, e.g. cotton, sodium carboxymethylcellulose 2) Covalently bind two AMPs (nisin, a plant cyclotide) to the textile surface through new coupling agent, diazonium, or gold nanoparticles 3) Assess and compare the anti-biofilm capacity of the new wound dressing We anticipate the secondment will not only generate proof-of-concept data for the dual treatment technique for future UKRI grant application, but also will greatly enhance the industrialized perspective and cross-sector skill for the nominated postdoctoral fellow.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: The main aims that were addressed and outcomes achieved through the completion of this collaborative project were: 1. Define and refine techniques to incorporate silver and gold nanoparticles onto fabrics Active functionalising agents were synthesised and subsequently used to functionalise wound dressings to act as templates to facilitate the binding of silver/gold nanoparticles. Different functionalities were tested including carboxyl, nitro and amino groups as part of the refinement process to enhance grafting efficiency and anti-microbial action. The incorporation of different chemical functionalities had a direct impact on the subsequent binding of gold/silver nanoparticles. Standardised protocols have been developed for these procedures to achieve reproducible functionalised fabrics for testing purposes. New active functionalities were produced which we aim to publish in scientific journals and form the basis of the IP surrounding functionalisation. 2. Optimize the electro/electroless deposition approaches to introduce silver or gold nanoparticles onto textile surfaces Electrodeposition is routinely used in the industrial manufacturing processes but typically used to introduce metals on the surface of solid metallic surfaces. This approach was trialled to facilitate metal nanoparticle deposition on the surface of non-conductive materials (wound dressings). This technology circumvents the use of strong reducing agents traditionally used which are harmful to health and to the environment. Significant cost savings are achieved through this approach with the much-reduced amounts of metal salts needed for the production of the anti-biofilm wound dressings. 3. Assess and compare the anti-biofilm capacity of the new wound dressing A range of modified fabrics were produced with different functionalities and subsequent methods of silver nanoparticle attachment. Anti-biofilm testing at The Liverpool School of Tropical Medicine for two bacterial strains of significant medical interest: Pseudomonas aeruginosa and MRSA showed very promising results for the effectiveness of the modified wound dressings. Bacterial growth was seen to be inhibited in all silver modified wound dressings compared to controls, however, specific functionalities used to bind silver nanoparticles to the wound dressings were shown to be particularly effective in eliminating bacteria based on absorption readings of overnight cultures. Future work: Following the completion of proof-of-principle studies, optimisations including the incorporation of antimicrobial peptides (AMPs) will be trialled. These studies are aimed to assess a potential further improvement of the antibiofilm wound dressings and to assess any additive effects of dual AMP/silver/gold fabrics. Further anti-biofilm testing would be implemented. The next step in the development of the anti-biofilm wound dressings include biocompatibility testing which will be conducted through in vitro cell cultures and metabolic assays to identify and cytotoxic effects. Conversations will now be sought with clinical personnel to help in the development of the wound dressings to aid in the design to have the most significant impact based on clinical needs. The new collaboration consortium comprising Keele University, Shimyatech and The Liverpool School of Tropical Medicine has been established to apply for new grant application. We are working on protection of IP, generation of at least one publication and preparation of further grant funding applications.
Start Year 2021
 
Description NBIC FTMA3_21_026 Nano-modification of textile surface with antimicrobial and antibiofilm features for wound dressing (Ying Yang) 
Organisation ShimyaTech Ltd
Country United Kingdom 
Sector Private 
PI Contribution This FTMA application addresses the 'Aging society' challenge outlined in the UKRI's Industry Strategy, specifically on management of chronic wounds. In the current society with its aging population, chronic wounds such as diabetic ulcers, venous leg ulcers are an increasingly medical concern. Without skin protection and priming with blood and constant interstitial fluid, the wound offers an optimal environment for bacteria growth and biofilm formation. Biofilm development in wounds is now recognized not only as a precursor to infection but also as a cause of delayed healing. Development of a robust anti-biofilm wound dressing can address this challenge and improve quality of life in an aging population. In the past years, our group and the industrial partner, ShimyaTech, have developed novel techniques to fight biofilms. In Keele, we have isolated new antimicrobial peptides (AMP) from plant, bacteria, and designed synthetic biomimetic AMP for surface modification with new coupling methods for the robust attachment of AMP to metallic surfaces. ShimyaTech has established new processing techniques for incorporation of bactericide nanoparticles onto surfaces by electro- or electroless deposition approaches. The aim of this project is to combine the anti-biofilm strategies, highlighted above, for textile surface treatment into a new type of wound dressing material. This will be achieved through ShimyaTech-based secondment with the following objectives: 1) Optimize electroless deposition approach to introduce gold or silver nanoparticles onto textile surfaces, e.g. cotton, sodium carboxymethylcellulose 2) Covalently bind two AMPs (nisin, a plant cyclotide) to the textile surface through new coupling agent, diazonium, or gold nanoparticles 3) Assess and compare the anti-biofilm capacity of the new wound dressing We anticipate the secondment will not only generate proof-of-concept data for the dual treatment technique for future UKRI grant application, but also will greatly enhance the industrialized perspective and cross-sector skill for the nominated postdoctoral fellow.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: The main aims that were addressed and outcomes achieved through the completion of this collaborative project were: 1. Define and refine techniques to incorporate silver and gold nanoparticles onto fabrics Active functionalising agents were synthesised and subsequently used to functionalise wound dressings to act as templates to facilitate the binding of silver/gold nanoparticles. Different functionalities were tested including carboxyl, nitro and amino groups as part of the refinement process to enhance grafting efficiency and anti-microbial action. The incorporation of different chemical functionalities had a direct impact on the subsequent binding of gold/silver nanoparticles. Standardised protocols have been developed for these procedures to achieve reproducible functionalised fabrics for testing purposes. New active functionalities were produced which we aim to publish in scientific journals and form the basis of the IP surrounding functionalisation. 2. Optimize the electro/electroless deposition approaches to introduce silver or gold nanoparticles onto textile surfaces Electrodeposition is routinely used in the industrial manufacturing processes but typically used to introduce metals on the surface of solid metallic surfaces. This approach was trialled to facilitate metal nanoparticle deposition on the surface of non-conductive materials (wound dressings). This technology circumvents the use of strong reducing agents traditionally used which are harmful to health and to the environment. Significant cost savings are achieved through this approach with the much-reduced amounts of metal salts needed for the production of the anti-biofilm wound dressings. 3. Assess and compare the anti-biofilm capacity of the new wound dressing A range of modified fabrics were produced with different functionalities and subsequent methods of silver nanoparticle attachment. Anti-biofilm testing at The Liverpool School of Tropical Medicine for two bacterial strains of significant medical interest: Pseudomonas aeruginosa and MRSA showed very promising results for the effectiveness of the modified wound dressings. Bacterial growth was seen to be inhibited in all silver modified wound dressings compared to controls, however, specific functionalities used to bind silver nanoparticles to the wound dressings were shown to be particularly effective in eliminating bacteria based on absorption readings of overnight cultures. Future work: Following the completion of proof-of-principle studies, optimisations including the incorporation of antimicrobial peptides (AMPs) will be trialled. These studies are aimed to assess a potential further improvement of the antibiofilm wound dressings and to assess any additive effects of dual AMP/silver/gold fabrics. Further anti-biofilm testing would be implemented. The next step in the development of the anti-biofilm wound dressings include biocompatibility testing which will be conducted through in vitro cell cultures and metabolic assays to identify and cytotoxic effects. Conversations will now be sought with clinical personnel to help in the development of the wound dressings to aid in the design to have the most significant impact based on clinical needs. The new collaboration consortium comprising Keele University, Shimyatech and The Liverpool School of Tropical Medicine has been established to apply for new grant application. We are working on protection of IP, generation of at least one publication and preparation of further grant funding applications.
Start Year 2021
 
Description NBIC FTMA3_21_027 The limit of detection for bacteria, biofilms, and the viable but nonculturable state, of Bactiscan (Callum Highmore) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Bactiscan is a UV based micro-organism detection technology that allows microbial contaminants to be detected by the naked eye. It has the potential to become a disruptive technology to the food sector, and aligns with ISCF 'Transforming food production' priority. In food production, Bactiscan could facilitate the large scale reduction of product recalls, foodborne disease outbreaks, and food waste. Its widespread adoption would work towards a streamlined, more efficient system of food production. While proven effective in food production settings, unanswered microbiological questions remain about the sensitivity of Bactiscan and its ability to detect industrially relevant bacterial phenotypes: early stage biofilms and viable but nonculturable (VBNC) cells. This project allows the research team Callum Highmore and Kirsty Cooper to work with the company to collect contamination samples from food production sites to verify their findings in a case study. The FTMA co-recipients will gain experience working with the company and the food production environment. It will also allow for the use of Bactiscan technology to determine its detection limits for pathogens via simple microbiological methods e.g. culture techniques and confocal microscopy, and establish its parameters of detection of early-stage and mature biofilms and VBNC foodborne pathogens. A report will be generated for EIT International and Bactiview, and a short scientific journal article will be produced which will benefit the adoption of Bactiview by the food industry and the co-recipients of the FTMA as a highly cited article that will enhance their research profiles and outputs. This pilot study could lead to a longer partnership with Bactiview and EIT International, with future studies focusing on the mechanism of fluorescence and detection, and differentiation of species by Bactiscan. Working closely with industry partners will provide the research team with valuable experience as the UK funding landscape brings academia and industry closer together.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: The detection limit for Bactiscan for 4 foodborne pathogen species was found, measured in ambient laboratory light, and in darkness. Concentration and volume were taken into account for, where it was found that concentration of bacteria was a more significant factor than volume of contamination spot, and detection limits ranged from 1.9*10^7 CFU (L. monocytogenes) to 2.4*10^6 CFU (S. enterica). No differences in brightness or colour were observed between fluorescence of different bacterial species, and level of lighting had a limited effect on the ability to observe bacterial contamination by Bactiscan. These data allow Biopharma Group to answer frequent questions from consumers in the food industry, and permit a more comprehensive comparison of Bactiscan against other detection methods used in the sector. Biofilms for each species were grown for 10 days at room temperature and at 37oC, they were observed by Bactiscan daily in an attempt to detect them via fluorescence. By day 4, 80% of the biofilms could be detected by eye for all species under optimal conditions (grown at 37oC, observed in darkness), where E. coli and L. monocytogenes could be consistently detected from day 2. Further analyses were conducted via confocal microscopy, in which total cell numbers were counted and percentage of live and dead cells were measured for each biofilm for each species for the first 3 days of growth. E. coli and L. monocytogenes biofilms had high proportions of live cells in their biofilms (65% and 87% at day 3, respectively) which corresponded to higher visibility with Bactiscan. S. aureus detection by Bactiscan was correlated more closely to an increase in total cell numbers in the biofilm than to the number of living cells. To assess whether Bactiscan can detect dead and stressed cells, bacteria were heat killed at 70oC or stressed with 50ppm chlorine for 5 minutes. Heat killing the bacteria did not affect the ability of Bactiscan to detect any of the species tested, meaning that Bactiscan can detect dead cells. Chlorine stressed E. coli, L. monocytogenes, and S. enterica were detectable by Bactiscan in darkness despite fluorescing less brightly than untreated cell populations. This suggests that chlorine stress interferes with the S-layer target of Bactiscan fluorescence, but not prohibitively. In daylight, chlorine stressed E. coli and S. enterica were not detectable by Bactiscan. This further provides evidence that the S-layer is interfered with by chlorine stress, as the Gram-positive L. monocytogenes was more detectable following chlorine treatment than the Gram-negative species tested, and the S-layer on Gram-positive bacteria may be better supported by a thick lipopolysaccharide layer. The findings on biofilm detection and stress states provide Biopharma Group with new insights on how Bactiscan can be best applied to food processing factories, and places them in a better position to contrast against the industry standard of ATP testing. This project now has a near complete dataset for a paper, which will be written jointly with the company. As this is the first academic study to assess this promising technology, I am expecting a high level of citations as the Bactiscan device is more widely adopted into industry practices. The project has also led to other research questions that may be answered via further funding in partnership with Biopharma Group. Further work: I will complete the dataset required for a publication, which is an experiment to measure detection of bacterial contamination by Bactiscan from meat, fish, and dairy. Then, the company and I will jointly write the manuscript for publication. We will meet at the end of September to discuss potential further funding opportunities to study the underlying physical mechanism of bacterial fluorescence with Bactiscan, and the implications that has on detection of bacteria in food processing environments. Support is not needed at this time, beyond dissemination of future funding calls when they arise.
Start Year 2021
 
Description NBIC FTMA3_21_027 The limit of detection for bacteria, biofilms, and the viable but nonculturable state, of Bactiscan (Callum Highmore) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Bactiscan is a UV based micro-organism detection technology that allows microbial contaminants to be detected by the naked eye. It has the potential to become a disruptive technology to the food sector, and aligns with ISCF 'Transforming food production' priority. In food production, Bactiscan could facilitate the large scale reduction of product recalls, foodborne disease outbreaks, and food waste. Its widespread adoption would work towards a streamlined, more efficient system of food production. While proven effective in food production settings, unanswered microbiological questions remain about the sensitivity of Bactiscan and its ability to detect industrially relevant bacterial phenotypes: early stage biofilms and viable but nonculturable (VBNC) cells. This project allows the research team Callum Highmore and Kirsty Cooper to work with the company to collect contamination samples from food production sites to verify their findings in a case study. The FTMA co-recipients will gain experience working with the company and the food production environment. It will also allow for the use of Bactiscan technology to determine its detection limits for pathogens via simple microbiological methods e.g. culture techniques and confocal microscopy, and establish its parameters of detection of early-stage and mature biofilms and VBNC foodborne pathogens. A report will be generated for EIT International and Bactiview, and a short scientific journal article will be produced which will benefit the adoption of Bactiview by the food industry and the co-recipients of the FTMA as a highly cited article that will enhance their research profiles and outputs. This pilot study could lead to a longer partnership with Bactiview and EIT International, with future studies focusing on the mechanism of fluorescence and detection, and differentiation of species by Bactiscan. Working closely with industry partners will provide the research team with valuable experience as the UK funding landscape brings academia and industry closer together.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: The detection limit for Bactiscan for 4 foodborne pathogen species was found, measured in ambient laboratory light, and in darkness. Concentration and volume were taken into account for, where it was found that concentration of bacteria was a more significant factor than volume of contamination spot, and detection limits ranged from 1.9*10^7 CFU (L. monocytogenes) to 2.4*10^6 CFU (S. enterica). No differences in brightness or colour were observed between fluorescence of different bacterial species, and level of lighting had a limited effect on the ability to observe bacterial contamination by Bactiscan. These data allow Biopharma Group to answer frequent questions from consumers in the food industry, and permit a more comprehensive comparison of Bactiscan against other detection methods used in the sector. Biofilms for each species were grown for 10 days at room temperature and at 37oC, they were observed by Bactiscan daily in an attempt to detect them via fluorescence. By day 4, 80% of the biofilms could be detected by eye for all species under optimal conditions (grown at 37oC, observed in darkness), where E. coli and L. monocytogenes could be consistently detected from day 2. Further analyses were conducted via confocal microscopy, in which total cell numbers were counted and percentage of live and dead cells were measured for each biofilm for each species for the first 3 days of growth. E. coli and L. monocytogenes biofilms had high proportions of live cells in their biofilms (65% and 87% at day 3, respectively) which corresponded to higher visibility with Bactiscan. S. aureus detection by Bactiscan was correlated more closely to an increase in total cell numbers in the biofilm than to the number of living cells. To assess whether Bactiscan can detect dead and stressed cells, bacteria were heat killed at 70oC or stressed with 50ppm chlorine for 5 minutes. Heat killing the bacteria did not affect the ability of Bactiscan to detect any of the species tested, meaning that Bactiscan can detect dead cells. Chlorine stressed E. coli, L. monocytogenes, and S. enterica were detectable by Bactiscan in darkness despite fluorescing less brightly than untreated cell populations. This suggests that chlorine stress interferes with the S-layer target of Bactiscan fluorescence, but not prohibitively. In daylight, chlorine stressed E. coli and S. enterica were not detectable by Bactiscan. This further provides evidence that the S-layer is interfered with by chlorine stress, as the Gram-positive L. monocytogenes was more detectable following chlorine treatment than the Gram-negative species tested, and the S-layer on Gram-positive bacteria may be better supported by a thick lipopolysaccharide layer. The findings on biofilm detection and stress states provide Biopharma Group with new insights on how Bactiscan can be best applied to food processing factories, and places them in a better position to contrast against the industry standard of ATP testing. This project now has a near complete dataset for a paper, which will be written jointly with the company. As this is the first academic study to assess this promising technology, I am expecting a high level of citations as the Bactiscan device is more widely adopted into industry practices. The project has also led to other research questions that may be answered via further funding in partnership with Biopharma Group. Further work: I will complete the dataset required for a publication, which is an experiment to measure detection of bacterial contamination by Bactiscan from meat, fish, and dairy. Then, the company and I will jointly write the manuscript for publication. We will meet at the end of September to discuss potential further funding opportunities to study the underlying physical mechanism of bacterial fluorescence with Bactiscan, and the implications that has on detection of bacteria in food processing environments. Support is not needed at this time, beyond dissemination of future funding calls when they arise.
Start Year 2021
 
Description NBIC FTMA3_21_029 Biofilms and Regenerative Tissue Repair Scaffolds: Interaction, Influence and Sensing Technologies (Mat Hardman) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This proposal is for a two-way talent exchange between the University of Hull (Hull York Medical School) and a leading SME in the area of regenerative medicine. The FTMA funding will support the placement of a highly experienced postdoctoral researcher from the Medical School with the industry partner for a period of three months. An experienced Translational Project Manager from the industry partner will also be seconded to the University's Advanced Wound Care group for the same period (in-kind support). This two-way exchange will provide extensive training for both researcher and industrialist, facilitating a small-scale pilot study and development of the academia-industry relationship. It is envisaged that this FTMA will support at least one follow-on substantive funding application. HYMS, the academic partner, has extensive expertise in wound research and wound model development. Our understanding of host-microbe interaction and expertise in laboratory microbiome/biofilm evaluation is a particular area of strength. The industry partner has extensive expertise in medical device technology development in the wound healing field. They wish to understand how to evaluate the formation/composition of biofilms within their technologies, and explore the potential to develop novel biofilm sensing approaches. The FTMA recipient will gain industry-facing training exploring market drivers, current approaches, IP landscape and commercial opportunities, while the seconded industrialist will gain in-depth understanding of wound biofilm models and sensing opportunities. This proposal aligns closely with several challenges outlined in the UKRI's Industry Strategy Challenge Fund/Ageing Society theme. For example, it has the potential to support "from data to early diagnosis and precision medicine" via personalised biofilm detection, and "leading edge healthcare" via accelerated medical device development for wound care.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Outcomes in each of the three project goals were: 1. Two-way skills training: Dr Liz Roberts embraced the opportunity to undertake skills training with Neotherix. Meetings, teleconferences and dedicated time for engagement and follow-up exposed Liz to a range of new product development and project management processes. She developed new insight into medical device regulations, intellectual property and the clinical development pathway. Dr Ramisha Rehman (Neotherix Translational Project Manager) was immersed in an active biofilm wound research group (see page 3). She thoroughly enjoyed the opportunity to learn new practical skills in biofilm laboratory research, and begin to evaluate scaffold bacteria interactions. Here, Ramisha worked with Liz and Miss Alex Kidd (another experienced member of the wound group). Hands-on experience gave Ramisha invaluable insight into available methodologies, and an opportunity to formulate further experimental opportunities. 2. Pilot data generation: The aim of pilot studies was to understand how Neotherix' innovative scaffold technology would interact with planktonic and biofilm bacteria. Prior to the FTMA no studies of this kind had been performed with this material. A first series of experiments determined the effect of scaffold material on planktonic bacterial growth versus control gauze (standard wound dressing). Briefly, sub-cultured wound-derived S. aureus or S. epidermidis were incubated overnight with 1cm2 of scaffold or gauze, followed by bacterial enumeration and confocal live/dead imaging of the scaffold (Figure 1). Pilot data indicate that the presence of scaffold inhibited the growth of planktonic S. aureus. Interestingly, confocal imaging revealed viable S. aureus and S. epidermidis adhered to the scaffold. Further analysis is required to evaluate biofilm phenotype in these samples. A second series of experiments explored the effect of scaffold on the de novo formation of S. aureus biofilm in our viable human skin model (Figure 2). While not significant, we observed a slight trend to reduced high-density biofilm bacterial numbers in the scaffold-treated group. Collectively, these pilot data provide new insight into the potential interaction of novel scaffolds and wound bacteria. 3. Two-way Knowledge exchange: Working closely over a short, focussed period has led to the identification of a number of potential new collaboration opportunities for further exploration. For example, it appears that the Hull Wound Group will be able to contribute synergistically to an ongoing collaboration between Neotherix and the University of Sheffield. An NDA has been signed to allow confidential discussions, with the goal of generating pilot data to support a joint external funding application. Future work: 1) Following on from this 3 months FTMA project, we are excited to report that University of Hull and Neotherix have agreed to jointly fund a new 3 year PhD project starting in Sept 2020. The PhD "exploring innovative regenerative scaffolds for simultaneous bacteria/host monitoring and healing promotion" will build upon the FTMA pilot work. 2) FTMA knowledge exchange activities have led us pursue two new opportunities for external funding applications with Neotherix and the Universities of Sheffield and York. Both are within NBIC remit. We will engage NBIC for further support if needed, and would like to formally acknowledge the invaluable partnering support provided by NBIC to date. 3) Dr Liz Roberts has recently moved on to a new position, combining her skills in project management and medical writing. The FTMA exchange experience contributed to her making this decision, providing an insight into career opportunities outside of Academia.
Start Year 2021
 
Description NBIC FTMA3_21_029 Biofilms and Regenerative Tissue Repair Scaffolds: Interaction, Influence and Sensing Technologies (Mat Hardman) 
Organisation Neotherix Ltd
Country United Kingdom 
Sector Private 
PI Contribution This proposal is for a two-way talent exchange between the University of Hull (Hull York Medical School) and a leading SME in the area of regenerative medicine. The FTMA funding will support the placement of a highly experienced postdoctoral researcher from the Medical School with the industry partner for a period of three months. An experienced Translational Project Manager from the industry partner will also be seconded to the University's Advanced Wound Care group for the same period (in-kind support). This two-way exchange will provide extensive training for both researcher and industrialist, facilitating a small-scale pilot study and development of the academia-industry relationship. It is envisaged that this FTMA will support at least one follow-on substantive funding application. HYMS, the academic partner, has extensive expertise in wound research and wound model development. Our understanding of host-microbe interaction and expertise in laboratory microbiome/biofilm evaluation is a particular area of strength. The industry partner has extensive expertise in medical device technology development in the wound healing field. They wish to understand how to evaluate the formation/composition of biofilms within their technologies, and explore the potential to develop novel biofilm sensing approaches. The FTMA recipient will gain industry-facing training exploring market drivers, current approaches, IP landscape and commercial opportunities, while the seconded industrialist will gain in-depth understanding of wound biofilm models and sensing opportunities. This proposal aligns closely with several challenges outlined in the UKRI's Industry Strategy Challenge Fund/Ageing Society theme. For example, it has the potential to support "from data to early diagnosis and precision medicine" via personalised biofilm detection, and "leading edge healthcare" via accelerated medical device development for wound care.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Outcomes in each of the three project goals were: 1. Two-way skills training: Dr Liz Roberts embraced the opportunity to undertake skills training with Neotherix. Meetings, teleconferences and dedicated time for engagement and follow-up exposed Liz to a range of new product development and project management processes. She developed new insight into medical device regulations, intellectual property and the clinical development pathway. Dr Ramisha Rehman (Neotherix Translational Project Manager) was immersed in an active biofilm wound research group (see page 3). She thoroughly enjoyed the opportunity to learn new practical skills in biofilm laboratory research, and begin to evaluate scaffold bacteria interactions. Here, Ramisha worked with Liz and Miss Alex Kidd (another experienced member of the wound group). Hands-on experience gave Ramisha invaluable insight into available methodologies, and an opportunity to formulate further experimental opportunities. 2. Pilot data generation: The aim of pilot studies was to understand how Neotherix' innovative scaffold technology would interact with planktonic and biofilm bacteria. Prior to the FTMA no studies of this kind had been performed with this material. A first series of experiments determined the effect of scaffold material on planktonic bacterial growth versus control gauze (standard wound dressing). Briefly, sub-cultured wound-derived S. aureus or S. epidermidis were incubated overnight with 1cm2 of scaffold or gauze, followed by bacterial enumeration and confocal live/dead imaging of the scaffold (Figure 1). Pilot data indicate that the presence of scaffold inhibited the growth of planktonic S. aureus. Interestingly, confocal imaging revealed viable S. aureus and S. epidermidis adhered to the scaffold. Further analysis is required to evaluate biofilm phenotype in these samples. A second series of experiments explored the effect of scaffold on the de novo formation of S. aureus biofilm in our viable human skin model (Figure 2). While not significant, we observed a slight trend to reduced high-density biofilm bacterial numbers in the scaffold-treated group. Collectively, these pilot data provide new insight into the potential interaction of novel scaffolds and wound bacteria. 3. Two-way Knowledge exchange: Working closely over a short, focussed period has led to the identification of a number of potential new collaboration opportunities for further exploration. For example, it appears that the Hull Wound Group will be able to contribute synergistically to an ongoing collaboration between Neotherix and the University of Sheffield. An NDA has been signed to allow confidential discussions, with the goal of generating pilot data to support a joint external funding application. Future work: 1) Following on from this 3 months FTMA project, we are excited to report that University of Hull and Neotherix have agreed to jointly fund a new 3 year PhD project starting in Sept 2020. The PhD "exploring innovative regenerative scaffolds for simultaneous bacteria/host monitoring and healing promotion" will build upon the FTMA pilot work. 2) FTMA knowledge exchange activities have led us pursue two new opportunities for external funding applications with Neotherix and the Universities of Sheffield and York. Both are within NBIC remit. We will engage NBIC for further support if needed, and would like to formally acknowledge the invaluable partnering support provided by NBIC to date. 3) Dr Liz Roberts has recently moved on to a new position, combining her skills in project management and medical writing. The FTMA exchange experience contributed to her making this decision, providing an insight into career opportunities outside of Academia.
Start Year 2021
 
Description NBIC FTMA3_21_029 Biofilms and Regenerative Tissue Repair Scaffolds: Interaction, Influence and Sensing Technologies (Mat Hardman) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution This proposal is for a two-way talent exchange between the University of Hull (Hull York Medical School) and a leading SME in the area of regenerative medicine. The FTMA funding will support the placement of a highly experienced postdoctoral researcher from the Medical School with the industry partner for a period of three months. An experienced Translational Project Manager from the industry partner will also be seconded to the University's Advanced Wound Care group for the same period (in-kind support). This two-way exchange will provide extensive training for both researcher and industrialist, facilitating a small-scale pilot study and development of the academia-industry relationship. It is envisaged that this FTMA will support at least one follow-on substantive funding application. HYMS, the academic partner, has extensive expertise in wound research and wound model development. Our understanding of host-microbe interaction and expertise in laboratory microbiome/biofilm evaluation is a particular area of strength. The industry partner has extensive expertise in medical device technology development in the wound healing field. They wish to understand how to evaluate the formation/composition of biofilms within their technologies, and explore the potential to develop novel biofilm sensing approaches. The FTMA recipient will gain industry-facing training exploring market drivers, current approaches, IP landscape and commercial opportunities, while the seconded industrialist will gain in-depth understanding of wound biofilm models and sensing opportunities. This proposal aligns closely with several challenges outlined in the UKRI's Industry Strategy Challenge Fund/Ageing Society theme. For example, it has the potential to support "from data to early diagnosis and precision medicine" via personalised biofilm detection, and "leading edge healthcare" via accelerated medical device development for wound care.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Outcomes in each of the three project goals were: 1. Two-way skills training: Dr Liz Roberts embraced the opportunity to undertake skills training with Neotherix. Meetings, teleconferences and dedicated time for engagement and follow-up exposed Liz to a range of new product development and project management processes. She developed new insight into medical device regulations, intellectual property and the clinical development pathway. Dr Ramisha Rehman (Neotherix Translational Project Manager) was immersed in an active biofilm wound research group (see page 3). She thoroughly enjoyed the opportunity to learn new practical skills in biofilm laboratory research, and begin to evaluate scaffold bacteria interactions. Here, Ramisha worked with Liz and Miss Alex Kidd (another experienced member of the wound group). Hands-on experience gave Ramisha invaluable insight into available methodologies, and an opportunity to formulate further experimental opportunities. 2. Pilot data generation: The aim of pilot studies was to understand how Neotherix' innovative scaffold technology would interact with planktonic and biofilm bacteria. Prior to the FTMA no studies of this kind had been performed with this material. A first series of experiments determined the effect of scaffold material on planktonic bacterial growth versus control gauze (standard wound dressing). Briefly, sub-cultured wound-derived S. aureus or S. epidermidis were incubated overnight with 1cm2 of scaffold or gauze, followed by bacterial enumeration and confocal live/dead imaging of the scaffold (Figure 1). Pilot data indicate that the presence of scaffold inhibited the growth of planktonic S. aureus. Interestingly, confocal imaging revealed viable S. aureus and S. epidermidis adhered to the scaffold. Further analysis is required to evaluate biofilm phenotype in these samples. A second series of experiments explored the effect of scaffold on the de novo formation of S. aureus biofilm in our viable human skin model (Figure 2). While not significant, we observed a slight trend to reduced high-density biofilm bacterial numbers in the scaffold-treated group. Collectively, these pilot data provide new insight into the potential interaction of novel scaffolds and wound bacteria. 3. Two-way Knowledge exchange: Working closely over a short, focussed period has led to the identification of a number of potential new collaboration opportunities for further exploration. For example, it appears that the Hull Wound Group will be able to contribute synergistically to an ongoing collaboration between Neotherix and the University of Sheffield. An NDA has been signed to allow confidential discussions, with the goal of generating pilot data to support a joint external funding application. Future work: 1) Following on from this 3 months FTMA project, we are excited to report that University of Hull and Neotherix have agreed to jointly fund a new 3 year PhD project starting in Sept 2020. The PhD "exploring innovative regenerative scaffolds for simultaneous bacteria/host monitoring and healing promotion" will build upon the FTMA pilot work. 2) FTMA knowledge exchange activities have led us pursue two new opportunities for external funding applications with Neotherix and the Universities of Sheffield and York. Both are within NBIC remit. We will engage NBIC for further support if needed, and would like to formally acknowledge the invaluable partnering support provided by NBIC to date. 3) Dr Liz Roberts has recently moved on to a new position, combining her skills in project management and medical writing. The FTMA exchange experience contributed to her making this decision, providing an insight into career opportunities outside of Academia.
Start Year 2021
 
Description NBIC FTMA3_21_030 Do photosynthetic biofilms form on semi-transparent solar panel? (Christopher Howe) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution General overview. Agrivoltaics combines farming and solar photovoltaic energy production, allowing electricity production from semi-transparent photovoltaic materials simultaneously with crop growth. This sustainable dual land-use facilitates carbon targets, provides additional farm income (or cost reductions), and can alleviate competition for space between renewable energy installations and agriculture. Biofilms could affect the performance of solar panels. The formation of biofilms of photosynthetic microorganisms on the photo-active area of the solar panel has been already reported in several studies. In a study conducted in Brazil, the efficiency of standard solar panels was reported to decrease by 11% due the presence of a biofilm on the surface of photovoltaic panels. Our partner Polysolar needs to understand whether biofilms can also form on their own innovative semi-transparent panels, and what the consequences are. The aim of the secondment. Working with our commercial partner, we will verify the presence of biofilms on the surface of tinted semi-transparent solar panels installed by Polysolar (e.g., Greenhous, Smart-Energy-Homes and Skylight already installed in Cambridgeshire). Both surfaces (top and bottom) will be sampled because, for semitransparent solar panels, the presence of biofilms on either surface could affect the electrical output of those panels due diffused and reflected light. The samples will be taken in the lab of Prof. Howe in Cambridge where the microbiological composition of the samples will be analysed with molecular techniques based on DNA-RNA extraction. The secondment will complement the theoretical knowledge of Dr. Bombelli with practical experience. In return, Polysolar will have a clear understanding of the presence of biofilms on the installed solar panels, the nature of the organisms involved, and possible effects on the performance of the solar panels. Alignment with the UKRI's Industrial Strategy Challenge By promoting the use of low-carbon technologies the proposed project aligns well with the "Clean-Growth-Challenge".
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: How this project has helped? • This project has permitted Dr Bombelli to see how installed solar panels are kept and run in commercial and domestic environments. This has helped in understanding the potential restrictions related to real-world installations, giving him a more complete understanding of the supply-chain of solar technology. • The finding of this project will help Polysolar to refine the planning and installation of their solar panels. • This project indicates how biofilms are always present on the surface of solar panels. However, based on the optical properties (transmission spectra), the biofilms seem not to create any substantial variation in the optical properties of the panels. Having said that, to minimise the formation of biofilms, it is recommend to have panels installed at a tilted angle (>10°) and when possible routinely cleaned. Next steps: • Dr. Bombelli will present the findings described here to the Polysolar team. • A copy of the present report will be available to Polysolar and Polysolar's clients. • A further study will be planned to monitor the variation of the current output in relation with the solar radiation before and after cleaning (i.e., removal of biofilm). This will require access to an installation where the data of current output are logged. Feedback from industrial collaborator: We have been very pleased to participate in your NBIC funded project regarding sampling, understanding, and controlling biofilms found on semi-transparent photovoltaic panels installed by Polysolar. Polysolar is looking to support our customers by giving them the correct knowledge to maintain and optimise their photovoltaic systems. Thus, this project aligned very well with that aim. Our PV systems are unique in the fact that can be obscured from both sides by 'dirt' due to the transparency; one side can be affected by performance reduction, and the other side can be affected by transmitted spectrum change thus altering the aesthetics internal to the building. The outcome of this project helped Polysolar to appreciate the presence of biofilm on the solar panels installed. This could help us to improve our methods of planning and installation. We were indeed surprise to know that microbial communities including a mix of bacteria, cyanobacteria, algae and fungi were observed in every sample taken from the surface of the tinted semi-transparent solar panels. Whether the optical property (i.e., light transmission) of the tinted semi-transparent solar panels seemed to be not substantially affected by the presence of the superficial biofilms, the experimental technique used to investigate the biofilm could help us to follow the ageing of the panels.
Start Year 2021
 
Description NBIC FTMA3_21_030 Do photosynthetic biofilms form on semi-transparent solar panel? (Christopher Howe) 
Organisation Polysolar
Country United Kingdom 
Sector Private 
PI Contribution General overview. Agrivoltaics combines farming and solar photovoltaic energy production, allowing electricity production from semi-transparent photovoltaic materials simultaneously with crop growth. This sustainable dual land-use facilitates carbon targets, provides additional farm income (or cost reductions), and can alleviate competition for space between renewable energy installations and agriculture. Biofilms could affect the performance of solar panels. The formation of biofilms of photosynthetic microorganisms on the photo-active area of the solar panel has been already reported in several studies. In a study conducted in Brazil, the efficiency of standard solar panels was reported to decrease by 11% due the presence of a biofilm on the surface of photovoltaic panels. Our partner Polysolar needs to understand whether biofilms can also form on their own innovative semi-transparent panels, and what the consequences are. The aim of the secondment. Working with our commercial partner, we will verify the presence of biofilms on the surface of tinted semi-transparent solar panels installed by Polysolar (e.g., Greenhous, Smart-Energy-Homes and Skylight already installed in Cambridgeshire). Both surfaces (top and bottom) will be sampled because, for semitransparent solar panels, the presence of biofilms on either surface could affect the electrical output of those panels due diffused and reflected light. The samples will be taken in the lab of Prof. Howe in Cambridge where the microbiological composition of the samples will be analysed with molecular techniques based on DNA-RNA extraction. The secondment will complement the theoretical knowledge of Dr. Bombelli with practical experience. In return, Polysolar will have a clear understanding of the presence of biofilms on the installed solar panels, the nature of the organisms involved, and possible effects on the performance of the solar panels. Alignment with the UKRI's Industrial Strategy Challenge By promoting the use of low-carbon technologies the proposed project aligns well with the "Clean-Growth-Challenge".
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: How this project has helped? • This project has permitted Dr Bombelli to see how installed solar panels are kept and run in commercial and domestic environments. This has helped in understanding the potential restrictions related to real-world installations, giving him a more complete understanding of the supply-chain of solar technology. • The finding of this project will help Polysolar to refine the planning and installation of their solar panels. • This project indicates how biofilms are always present on the surface of solar panels. However, based on the optical properties (transmission spectra), the biofilms seem not to create any substantial variation in the optical properties of the panels. Having said that, to minimise the formation of biofilms, it is recommend to have panels installed at a tilted angle (>10°) and when possible routinely cleaned. Next steps: • Dr. Bombelli will present the findings described here to the Polysolar team. • A copy of the present report will be available to Polysolar and Polysolar's clients. • A further study will be planned to monitor the variation of the current output in relation with the solar radiation before and after cleaning (i.e., removal of biofilm). This will require access to an installation where the data of current output are logged. Feedback from industrial collaborator: We have been very pleased to participate in your NBIC funded project regarding sampling, understanding, and controlling biofilms found on semi-transparent photovoltaic panels installed by Polysolar. Polysolar is looking to support our customers by giving them the correct knowledge to maintain and optimise their photovoltaic systems. Thus, this project aligned very well with that aim. Our PV systems are unique in the fact that can be obscured from both sides by 'dirt' due to the transparency; one side can be affected by performance reduction, and the other side can be affected by transmitted spectrum change thus altering the aesthetics internal to the building. The outcome of this project helped Polysolar to appreciate the presence of biofilm on the solar panels installed. This could help us to improve our methods of planning and installation. We were indeed surprise to know that microbial communities including a mix of bacteria, cyanobacteria, algae and fungi were observed in every sample taken from the surface of the tinted semi-transparent solar panels. Whether the optical property (i.e., light transmission) of the tinted semi-transparent solar panels seemed to be not substantially affected by the presence of the superficial biofilms, the experimental technique used to investigate the biofilm could help us to follow the ageing of the panels.
Start Year 2021
 
Description NBIC FTMA3_21_030 Do photosynthetic biofilms form on semi-transparent solar panel? (Christopher Howe) 
Organisation University of Cambridge
Country United Kingdom 
Sector Academic/University 
PI Contribution General overview. Agrivoltaics combines farming and solar photovoltaic energy production, allowing electricity production from semi-transparent photovoltaic materials simultaneously with crop growth. This sustainable dual land-use facilitates carbon targets, provides additional farm income (or cost reductions), and can alleviate competition for space between renewable energy installations and agriculture. Biofilms could affect the performance of solar panels. The formation of biofilms of photosynthetic microorganisms on the photo-active area of the solar panel has been already reported in several studies. In a study conducted in Brazil, the efficiency of standard solar panels was reported to decrease by 11% due the presence of a biofilm on the surface of photovoltaic panels. Our partner Polysolar needs to understand whether biofilms can also form on their own innovative semi-transparent panels, and what the consequences are. The aim of the secondment. Working with our commercial partner, we will verify the presence of biofilms on the surface of tinted semi-transparent solar panels installed by Polysolar (e.g., Greenhous, Smart-Energy-Homes and Skylight already installed in Cambridgeshire). Both surfaces (top and bottom) will be sampled because, for semitransparent solar panels, the presence of biofilms on either surface could affect the electrical output of those panels due diffused and reflected light. The samples will be taken in the lab of Prof. Howe in Cambridge where the microbiological composition of the samples will be analysed with molecular techniques based on DNA-RNA extraction. The secondment will complement the theoretical knowledge of Dr. Bombelli with practical experience. In return, Polysolar will have a clear understanding of the presence of biofilms on the installed solar panels, the nature of the organisms involved, and possible effects on the performance of the solar panels. Alignment with the UKRI's Industrial Strategy Challenge By promoting the use of low-carbon technologies the proposed project aligns well with the "Clean-Growth-Challenge".
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from academic: How this project has helped? • This project has permitted Dr Bombelli to see how installed solar panels are kept and run in commercial and domestic environments. This has helped in understanding the potential restrictions related to real-world installations, giving him a more complete understanding of the supply-chain of solar technology. • The finding of this project will help Polysolar to refine the planning and installation of their solar panels. • This project indicates how biofilms are always present on the surface of solar panels. However, based on the optical properties (transmission spectra), the biofilms seem not to create any substantial variation in the optical properties of the panels. Having said that, to minimise the formation of biofilms, it is recommend to have panels installed at a tilted angle (>10°) and when possible routinely cleaned. Next steps: • Dr. Bombelli will present the findings described here to the Polysolar team. • A copy of the present report will be available to Polysolar and Polysolar's clients. • A further study will be planned to monitor the variation of the current output in relation with the solar radiation before and after cleaning (i.e., removal of biofilm). This will require access to an installation where the data of current output are logged. Feedback from industrial collaborator: We have been very pleased to participate in your NBIC funded project regarding sampling, understanding, and controlling biofilms found on semi-transparent photovoltaic panels installed by Polysolar. Polysolar is looking to support our customers by giving them the correct knowledge to maintain and optimise their photovoltaic systems. Thus, this project aligned very well with that aim. Our PV systems are unique in the fact that can be obscured from both sides by 'dirt' due to the transparency; one side can be affected by performance reduction, and the other side can be affected by transmitted spectrum change thus altering the aesthetics internal to the building. The outcome of this project helped Polysolar to appreciate the presence of biofilm on the solar panels installed. This could help us to improve our methods of planning and installation. We were indeed surprise to know that microbial communities including a mix of bacteria, cyanobacteria, algae and fungi were observed in every sample taken from the surface of the tinted semi-transparent solar panels. Whether the optical property (i.e., light transmission) of the tinted semi-transparent solar panels seemed to be not substantially affected by the presence of the superficial biofilms, the experimental technique used to investigate the biofilm could help us to follow the ageing of the panels.
Start Year 2021
 
Description NBIC FTMA3_21_032 Recruitment of partners for participation in the clinical implementation of a new Mycobacterium abscessus biofilm antimicrobial combination trial (James Harrison) 
Organisation Aston University
Country United Kingdom 
Sector Academic/University 
PI Contribution Mycobacterium abscessus is an environmental opportunistic human pathogen that can easily form difficult to eradicate biofilms within the lungs of patients with underlying respiratory conditions (such as cystic fibrosis (CF)). These infections are extremely difficult to treat, requiring at least 13 months of combined intravenous and nebulised antimicrobial treatment, partly due to the ability of M. abscessus to form biofilms, which leads to a 30% survival rate. M. abscessus infections are rising within the CF population annually, highlighting the urgent need for new therapeutic methods, as evidenced by the UKRI's Industry Strategy Challenge 'Leading-Edge Healthcare Challenge', particularly the development and delivery of new drugs. We have identified a new combination of antimicrobial compounds, including utilising a new betalactamase inhibitor, relebactam, which are effective at inhibiting a range of clinical M. abscessus isolates in vitro. However, our results to date have only involved actively growing planktonic cells, and now, biofilms. This combination has to date been used once in a human patient, who was unfortunately too far in their disease progression for survival. Despite this, there were clear improvements in their M. abscessus infection during the treatment period. With this in mind, my aims for this project are to engage clinicians and biofilm researchers, particularly those within the CF field, in order to build a new network between academic and clinical partners. We hope to explore antibiofilm activity of these compounds through the network, which is an important step for progression of any future M. abscessus treatment. I aim to visit clinicians around the UK to present our data and recruit them into the network. As an early career researcher, this will support my personal development by challenging me to identify and communicate with potential partners and also provide me with experience of effectively presenting scientific data to a non-research audience.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from Aston University: We have successfully developed a network of clinical M. abscessus isolate supply to Aston University, involving clinical partners nationally. A number of these partners are interested in being involved in a future clinical trial. We are planning to organise a meeting with all partners to share the outcomes of this national study into the efficacy of the antimicrobial combination against these different clinical isolates. Future work: Following the future meeting with the clinical partners, we would be keen to progress to devising and applying for a clinical trial for the combination therapy. However, following the meeting with Birmingham Children's Hospital, we have been informed that there is an impending report (within the next 6 months) detailing the impact of a new cystic fibrosis transmembrane conductance regulator, named "Kaftrio", on non-tuberculosis mycobacterial (NTM) infection. The outcomes of this report will have an impact on any clinical trial application, so plans for this are currently on hold until the report is released. A BBSRC grant is in preparation in order to establish the composition of M. abscessus complex biofilm, which includes co-investigators at University of Birmingham, whom add valuable expertise to the proposal. This is helping us to build a 'critical mass' of expertise within the West Midlands, giving us the opportunity to develop nationally. We would be keen to discuss NBIC involvement as a partner in the BBSRC grant proposal.
Start Year 2021
 
Description NBIC FTMA3_21_032 Recruitment of partners for participation in the clinical implementation of a new Mycobacterium abscessus biofilm antimicrobial combination trial (James Harrison) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Mycobacterium abscessus is an environmental opportunistic human pathogen that can easily form difficult to eradicate biofilms within the lungs of patients with underlying respiratory conditions (such as cystic fibrosis (CF)). These infections are extremely difficult to treat, requiring at least 13 months of combined intravenous and nebulised antimicrobial treatment, partly due to the ability of M. abscessus to form biofilms, which leads to a 30% survival rate. M. abscessus infections are rising within the CF population annually, highlighting the urgent need for new therapeutic methods, as evidenced by the UKRI's Industry Strategy Challenge 'Leading-Edge Healthcare Challenge', particularly the development and delivery of new drugs. We have identified a new combination of antimicrobial compounds, including utilising a new betalactamase inhibitor, relebactam, which are effective at inhibiting a range of clinical M. abscessus isolates in vitro. However, our results to date have only involved actively growing planktonic cells, and now, biofilms. This combination has to date been used once in a human patient, who was unfortunately too far in their disease progression for survival. Despite this, there were clear improvements in their M. abscessus infection during the treatment period. With this in mind, my aims for this project are to engage clinicians and biofilm researchers, particularly those within the CF field, in order to build a new network between academic and clinical partners. We hope to explore antibiofilm activity of these compounds through the network, which is an important step for progression of any future M. abscessus treatment. I aim to visit clinicians around the UK to present our data and recruit them into the network. As an early career researcher, this will support my personal development by challenging me to identify and communicate with potential partners and also provide me with experience of effectively presenting scientific data to a non-research audience.
Collaborator Contribution Collaborative partners in this flexible talent mobility scheme project.
Impact Feedback from Aston University: We have successfully developed a network of clinical M. abscessus isolate supply to Aston University, involving clinical partners nationally. A number of these partners are interested in being involved in a future clinical trial. We are planning to organise a meeting with all partners to share the outcomes of this national study into the efficacy of the antimicrobial combination against these different clinical isolates. Future work: Following the future meeting with the clinical partners, we would be keen to progress to devising and applying for a clinical trial for the combination therapy. However, following the meeting with Birmingham Children's Hospital, we have been informed that there is an impending report (within the next 6 months) detailing the impact of a new cystic fibrosis transmembrane conductance regulator, named "Kaftrio", on non-tuberculosis mycobacterial (NTM) infection. The outcomes of this report will have an impact on any clinical trial application, so plans for this are currently on hold until the report is released. A BBSRC grant is in preparation in order to establish the composition of M. abscessus complex biofilm, which includes co-investigators at University of Birmingham, whom add valuable expertise to the proposal. This is helping us to build a 'critical mass' of expertise within the West Midlands, giving us the opportunity to develop nationally. We would be keen to discuss NBIC involvement as a partner in the BBSRC grant proposal.
Start Year 2021
 
Description NBIC IAB Industry Advisory Board 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the IAB is to advise the NBIC Executive Management Team on: • the development of the NBIC; • the industrial engagement strategy for the NBIC; • NBIC funding calls • commercial exploitation of the results of the research conducted through the NBIC; • other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC IAB Industry Advisory Board 
Organisation BP (British Petroleum)
Department BP Chemicals
Country United Kingdom 
Sector Private 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the IAB is to advise the NBIC Executive Management Team on: • the development of the NBIC; • the industrial engagement strategy for the NBIC; • NBIC funding calls • commercial exploitation of the results of the research conducted through the NBIC; • other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC IAB Industry Advisory Board 
Organisation Chilled Food Association
Country United Kingdom 
Sector Private 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the IAB is to advise the NBIC Executive Management Team on: • the development of the NBIC; • the industrial engagement strategy for the NBIC; • NBIC funding calls • commercial exploitation of the results of the research conducted through the NBIC; • other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC IAB Industry Advisory Board 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the IAB is to advise the NBIC Executive Management Team on: • the development of the NBIC; • the industrial engagement strategy for the NBIC; • NBIC funding calls • commercial exploitation of the results of the research conducted through the NBIC; • other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC IAB Industry Advisory Board 
Organisation IBioIC
Country United Kingdom 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the IAB is to advise the NBIC Executive Management Team on: • the development of the NBIC; • the industrial engagement strategy for the NBIC; • NBIC funding calls • commercial exploitation of the results of the research conducted through the NBIC; • other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC IAB Industry Advisory Board 
Organisation Kohler Mira Ltd
Country United Kingdom 
Sector Private 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the IAB is to advise the NBIC Executive Management Team on: • the development of the NBIC; • the industrial engagement strategy for the NBIC; • NBIC funding calls • commercial exploitation of the results of the research conducted through the NBIC; • other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC IAB Industry Advisory Board 
Organisation Smith and Nephew
Country United Kingdom 
Sector Private 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the IAB is to advise the NBIC Executive Management Team on: • the development of the NBIC; • the industrial engagement strategy for the NBIC; • NBIC funding calls • commercial exploitation of the results of the research conducted through the NBIC; • other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC IAB Industry Advisory Board 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the IAB is to advise the NBIC Executive Management Team on: • the development of the NBIC; • the industrial engagement strategy for the NBIC; • NBIC funding calls • commercial exploitation of the results of the research conducted through the NBIC; • other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC ISAB International Scientific Advisory Board 
Organisation Aarhus University
Country Denmark 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the ISAB is to: Test and challenge the scientific strategy of NBIC and its delivery and implementation in the context of the international development of the field. Advise the EMT on the opportunities for exploitation of the scientific profile and advances made by the centre. Advise the EMT other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC ISAB International Scientific Advisory Board 
Organisation Cardiff University
Country United Kingdom 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the ISAB is to: Test and challenge the scientific strategy of NBIC and its delivery and implementation in the context of the international development of the field. Advise the EMT on the opportunities for exploitation of the scientific profile and advances made by the centre. Advise the EMT other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC ISAB International Scientific Advisory Board 
Organisation Columbia University
Country United States 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the ISAB is to: Test and challenge the scientific strategy of NBIC and its delivery and implementation in the context of the international development of the field. Advise the EMT on the opportunities for exploitation of the scientific profile and advances made by the centre. Advise the EMT other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC ISAB International Scientific Advisory Board 
Organisation Delft University of Technology (TU Delft)
Country Netherlands 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the ISAB is to: Test and challenge the scientific strategy of NBIC and its delivery and implementation in the context of the international development of the field. Advise the EMT on the opportunities for exploitation of the scientific profile and advances made by the centre. Advise the EMT other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC ISAB International Scientific Advisory Board 
Organisation Karolinska Institute
Country Sweden 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the ISAB is to: Test and challenge the scientific strategy of NBIC and its delivery and implementation in the context of the international development of the field. Advise the EMT on the opportunities for exploitation of the scientific profile and advances made by the centre. Advise the EMT other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC ISAB International Scientific Advisory Board 
Organisation National Center for Scientific Research (Centre National de la Recherche Scientifique CNRS)
Country France 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the ISAB is to: Test and challenge the scientific strategy of NBIC and its delivery and implementation in the context of the international development of the field. Advise the EMT on the opportunities for exploitation of the scientific profile and advances made by the centre. Advise the EMT other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC ISAB International Scientific Advisory Board 
Organisation University of Ghent
Country Belgium 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the ISAB is to: Test and challenge the scientific strategy of NBIC and its delivery and implementation in the context of the international development of the field. Advise the EMT on the opportunities for exploitation of the scientific profile and advances made by the centre. Advise the EMT other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC ISAB International Scientific Advisory Board 
Organisation University of Navarra
Country Spain 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The purpose of the ISAB is to: Test and challenge the scientific strategy of NBIC and its delivery and implementation in the context of the international development of the field. Advise the EMT on the opportunities for exploitation of the scientific profile and advances made by the centre. Advise the EMT other issues deemed appropriate to the strategic objectives and direction of the NBIC.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC NEB Non-Executive Board 
Organisation Alderley Park
Country United Kingdom 
Sector Private 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The aims and responsibilities of the Non-Executive Board are to: Advise the CEO and EMT on strategic direction for the Consortium's scientific, industrial engagement and operational activities; Challenge the EMT on the implementation of the IKC's Mission, Science and Operational Strategies; Monitor compliance to the Consortium Agreement and raise non-compliance with the appropriate party(ies); Monitor the activities of the IKC Consortium; Review KPIs in line with funding letter and other requirements; Ensure that commercial benefits accrue to businesses collaborating with the IKC, but that these do not distort the principle of openness of the IKC, and its willingness to engage with all stakeholders in the sector.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC NEB Non-Executive Board 
Organisation Cardiff University
Country United Kingdom 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The aims and responsibilities of the Non-Executive Board are to: Advise the CEO and EMT on strategic direction for the Consortium's scientific, industrial engagement and operational activities; Challenge the EMT on the implementation of the IKC's Mission, Science and Operational Strategies; Monitor compliance to the Consortium Agreement and raise non-compliance with the appropriate party(ies); Monitor the activities of the IKC Consortium; Review KPIs in line with funding letter and other requirements; Ensure that commercial benefits accrue to businesses collaborating with the IKC, but that these do not distort the principle of openness of the IKC, and its willingness to engage with all stakeholders in the sector.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC NEB Non-Executive Board 
Organisation Innovate UK
Country United Kingdom 
Sector Public 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The aims and responsibilities of the Non-Executive Board are to: Advise the CEO and EMT on strategic direction for the Consortium's scientific, industrial engagement and operational activities; Challenge the EMT on the implementation of the IKC's Mission, Science and Operational Strategies; Monitor compliance to the Consortium Agreement and raise non-compliance with the appropriate party(ies); Monitor the activities of the IKC Consortium; Review KPIs in line with funding letter and other requirements; Ensure that commercial benefits accrue to businesses collaborating with the IKC, but that these do not distort the principle of openness of the IKC, and its willingness to engage with all stakeholders in the sector.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC NEB Non-Executive Board 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The aims and responsibilities of the Non-Executive Board are to: Advise the CEO and EMT on strategic direction for the Consortium's scientific, industrial engagement and operational activities; Challenge the EMT on the implementation of the IKC's Mission, Science and Operational Strategies; Monitor compliance to the Consortium Agreement and raise non-compliance with the appropriate party(ies); Monitor the activities of the IKC Consortium; Review KPIs in line with funding letter and other requirements; Ensure that commercial benefits accrue to businesses collaborating with the IKC, but that these do not distort the principle of openness of the IKC, and its willingness to engage with all stakeholders in the sector.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC NEB Non-Executive Board 
Organisation University of East Anglia
Country United Kingdom 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The aims and responsibilities of the Non-Executive Board are to: Advise the CEO and EMT on strategic direction for the Consortium's scientific, industrial engagement and operational activities; Challenge the EMT on the implementation of the IKC's Mission, Science and Operational Strategies; Monitor compliance to the Consortium Agreement and raise non-compliance with the appropriate party(ies); Monitor the activities of the IKC Consortium; Review KPIs in line with funding letter and other requirements; Ensure that commercial benefits accrue to businesses collaborating with the IKC, but that these do not distort the principle of openness of the IKC, and its willingness to engage with all stakeholders in the sector.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC NEB Non-Executive Board 
Organisation University of Leeds
Country United Kingdom 
Sector Academic/University 
PI Contribution Arranging meetings and seeking guidance from the board.
Collaborator Contribution The aims and responsibilities of the Non-Executive Board are to: Advise the CEO and EMT on strategic direction for the Consortium's scientific, industrial engagement and operational activities; Challenge the EMT on the implementation of the IKC's Mission, Science and Operational Strategies; Monitor compliance to the Consortium Agreement and raise non-compliance with the appropriate party(ies); Monitor the activities of the IKC Consortium; Review KPIs in line with funding letter and other requirements; Ensure that commercial benefits accrue to businesses collaborating with the IKC, but that these do not distort the principle of openness of the IKC, and its willingness to engage with all stakeholders in the sector.
Impact Ongoing guidance to develop NBIC.
Start Year 2018
 
Description NBIC PE&O Award: A Germ's Journey (Katie Laird) 
Organisation De Montfort University
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding.
Collaborator Contribution A Germ's Journey: A Fight against Resistance interactive educational resources to improve children's understanding of Antimicrobial Resistance. Antibiotic resistance is a worldwide problem, by 2050 many antibiotics that we rely on today will no longer be effective. One solution is increased education on the importance of appropriate use of these drugs. A key age to introduce this concept is between 7- 11 years. Concepts that children need to understand include; the importance of completing courses of antibiotics, not sharing antibiotics, the difference between a virus and bacteria and when treatment is required. Understanding the importance of these actions from a young age will help in the fight against antibiotic resistance and preserve current antibiotics for future use. "A Germ's Journey - A Fight Against Resistance" resources teach children the importance of their actions in combating antibiotic resistance in a fun and interactive way. Within the school workshops/train-the-trainer sessions (5-10) bacterial growth will be explored including biofilms and how they play a role in the development of antibiotic resistant bacteria. Pre-and-post assessments (worksheets (for children), questionnaires & focus groups (teachers)) of the increase in children's knowledge will be conducted to evaluate the impact of the resources/teaching on children's understanding of AMR.
Impact None yet.
Start Year 2021
 
Description NBIC PE&O Award: A Germ's Journey (Katie Laird) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution A Germ's Journey: A Fight against Resistance interactive educational resources to improve children's understanding of Antimicrobial Resistance. Antibiotic resistance is a worldwide problem, by 2050 many antibiotics that we rely on today will no longer be effective. One solution is increased education on the importance of appropriate use of these drugs. A key age to introduce this concept is between 7- 11 years. Concepts that children need to understand include; the importance of completing courses of antibiotics, not sharing antibiotics, the difference between a virus and bacteria and when treatment is required. Understanding the importance of these actions from a young age will help in the fight against antibiotic resistance and preserve current antibiotics for future use. "A Germ's Journey - A Fight Against Resistance" resources teach children the importance of their actions in combating antibiotic resistance in a fun and interactive way. Within the school workshops/train-the-trainer sessions (5-10) bacterial growth will be explored including biofilms and how they play a role in the development of antibiotic resistant bacteria. Pre-and-post assessments (worksheets (for children), questionnaires & focus groups (teachers)) of the increase in children's knowledge will be conducted to evaluate the impact of the resources/teaching on children's understanding of AMR.
Impact None yet.
Start Year 2021
 
Description NBIC PE&O Award: Antibiotic Awareness initiative (Sandra Martin) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution A public health education initiative is being planned at the University of Bradford to support the National Antibiotic Awareness week campaign, which takes place around 18th November each year. Education stands will be available in 3 areas of the University. These will be manned by undergraduate students and academics from the schools of Chemistry, Pharmacy & Medical Sciences, Microbiology and Nursing. The initiative will promote undergraduate inter-professional public engagement activities and increase the knowledge and awareness of antimicrobial stewardship and antimicrobial resistance for the students and staff who man the stands, along with students, staff, visitors and members of the public who visit the information stands. Public engagement will also include pupils from local schools and colleges visiting the STEM centre at the University. Promotional materials available on the stands will include posters, leaflets and quizzes. In addition to information stands there will be a research showcase event on Wednesday 20th November 2019. This will showcase research in the field of antimicrobial stewardship and antimicrobial resistance, including enhanced targeting of antimicrobials, which is currently being undertaken by staff and students at the University. This will increase awareness of these topics by fellow students, staff and members of the public.
Impact Promotional materials available on the stands included posters, leaflets and quizzes (some of these materials are from the Antibiotic Guardian website, which directs you to the Public Health England website https://www.gov.uk/government/collections/european-antibiotic-awareness-day-resources). In addition to information stands there was a research showcase event on Wednesday 20th November 2019. This showcased research in the field of antimicrobial stewardship and antimicrobial resistance, including enhanced targeting of antimicrobials, which is currently being undertaken by staff and students at the University.
Start Year 2019
 
Description NBIC PE&O Award: Antibiotic Awareness initiative (Sandra Martin) 
Organisation University of Bradford
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding.
Collaborator Contribution A public health education initiative is being planned at the University of Bradford to support the National Antibiotic Awareness week campaign, which takes place around 18th November each year. Education stands will be available in 3 areas of the University. These will be manned by undergraduate students and academics from the schools of Chemistry, Pharmacy & Medical Sciences, Microbiology and Nursing. The initiative will promote undergraduate inter-professional public engagement activities and increase the knowledge and awareness of antimicrobial stewardship and antimicrobial resistance for the students and staff who man the stands, along with students, staff, visitors and members of the public who visit the information stands. Public engagement will also include pupils from local schools and colleges visiting the STEM centre at the University. Promotional materials available on the stands will include posters, leaflets and quizzes. In addition to information stands there will be a research showcase event on Wednesday 20th November 2019. This will showcase research in the field of antimicrobial stewardship and antimicrobial resistance, including enhanced targeting of antimicrobials, which is currently being undertaken by staff and students at the University. This will increase awareness of these topics by fellow students, staff and members of the public.
Impact Promotional materials available on the stands included posters, leaflets and quizzes (some of these materials are from the Antibiotic Guardian website, which directs you to the Public Health England website https://www.gov.uk/government/collections/european-antibiotic-awareness-day-resources). In addition to information stands there was a research showcase event on Wednesday 20th November 2019. This showcased research in the field of antimicrobial stewardship and antimicrobial resistance, including enhanced targeting of antimicrobials, which is currently being undertaken by staff and students at the University.
Start Year 2019
 
Description NBIC PE&O Award: Biofilms for Beginners (Claire Abel) 
Organisation James Hutton Institute
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Funding.
Collaborator Contribution Understanding what biofilms are, what they do in our rivers and why they are relevant to antimicrobial resistance. Through an existing NERC-DST project NE/R003270/1 we monitored river biofilm to better understand the role of substrate in the maintenance and development of antimicrobial resistance (AMR). We are keen to communicate four key messages: 1) Biofilms provide important ecological functions in our freshwaters 2) Biofilm provides a site for exchange of resistance genes 3) Antimicrobials and ARGs in can change biofilm function and 4) Inappropriate use of antimicrobials is destructive to freshwater environments. We will compile project video footage and photographs with new material and graphics into a film with voiceover to address what biofilms are and how they can be impacted by antibiotic use - addressing the above messages. This will be adapted into two versions - one for each target audience. Complemented by additional children's activities including how to make a (pretend) play-slime-based biofilm and a downloadable biofilm-themed activity book, materials will be freely available to primary schools for the autumn term, to OWLS (http://www.owls-learn.co.uk/), through virtual presence at the Royal Highland Show and via both institutes' social media/webpages. It will also be offered as a Curious Show (Royal Society of Edinburgh) and reported to NERC/DST and Scottish Government through existing reporting.
Impact None yet.
Start Year 2021
 
Description NBIC PE&O Award: Biofilms for Beginners (Claire Abel) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution Understanding what biofilms are, what they do in our rivers and why they are relevant to antimicrobial resistance. Through an existing NERC-DST project NE/R003270/1 we monitored river biofilm to better understand the role of substrate in the maintenance and development of antimicrobial resistance (AMR). We are keen to communicate four key messages: 1) Biofilms provide important ecological functions in our freshwaters 2) Biofilm provides a site for exchange of resistance genes 3) Antimicrobials and ARGs in can change biofilm function and 4) Inappropriate use of antimicrobials is destructive to freshwater environments. We will compile project video footage and photographs with new material and graphics into a film with voiceover to address what biofilms are and how they can be impacted by antibiotic use - addressing the above messages. This will be adapted into two versions - one for each target audience. Complemented by additional children's activities including how to make a (pretend) play-slime-based biofilm and a downloadable biofilm-themed activity book, materials will be freely available to primary schools for the autumn term, to OWLS (http://www.owls-learn.co.uk/), through virtual presence at the Royal Highland Show and via both institutes' social media/webpages. It will also be offered as a Curious Show (Royal Society of Edinburgh) and reported to NERC/DST and Scottish Government through existing reporting.
Impact None yet.
Start Year 2021
 
Description NBIC PE&O Award: BrainHub Website (Rebecca Thompson) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution We aim to produce a website that, linked with effective public engagement activities, will improve awareness and understanding about the environments in which biofilms are found and their impact. We will highlight: specific examples where biofilms are detrimental or beneficial; the impact biofilms have in different environments (with case studies); ongoing research with a focus on QIB and NBIC research) to understand, reduce or promote biofilms and links to relevant journal articles. A pyramid style of layering information depth covering a wide range of sectors will be used to maximise audience engagement. This approach is based on previously successful interactions with the public at science festivals, where the overarching basic information is explained in an engaging way to ensure that everyone, including children, can understand while also providing opportunities for those with particular interests, to probe in greater detail into the specifics e.g. how biofilms might affect them directly and how research is helping.
Impact This project included website design and content creation for 98 pages of a new biofilms educational resource. Fifty-five volunteers with biofilm expertise contributed content to the site, with participation being open to anyone with sufficient knowledge. We utilised the NBIC network to approach experts in particular fields and conducted peer review on the submitted content. We also included links to appropriate games and educational resources within the site. We demonstrated and promoted the website at the 2021 Norwich Science Festival as well as via an online social media campaign. Our aim was to improve awareness and understanding of biofilms, where they are found, if they are useful or harmful and how they are controlled. The Norwich Science Festival saw approximately 500 visitors to the Quadram Institute activities, with most not knowing what a biofilm was prior to attending. The website has had the following reach (the peak in Dec/Jan is due to the social media campaign run in collaboration with the Microbattle project). Interviews held at the Norwich Science Festival with attendees and via peer review of the finished site have provided a very positive response. However, the average engagement time is considered relatively low and could be improved upon. We have received no comments from the online contact us form (but have checked that it is working). The site can easily be found on a Google search but visibility and engagement could be improved if it was used in academic situations. In order for the website to be considered a complete success further time and financial investment on publicity and updates will be required.
Start Year 2020
 
Description NBIC PE&O Award: BrainHub Website (Rebecca Thompson) 
Organisation Quadram Institute Bioscience
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding.
Collaborator Contribution We aim to produce a website that, linked with effective public engagement activities, will improve awareness and understanding about the environments in which biofilms are found and their impact. We will highlight: specific examples where biofilms are detrimental or beneficial; the impact biofilms have in different environments (with case studies); ongoing research with a focus on QIB and NBIC research) to understand, reduce or promote biofilms and links to relevant journal articles. A pyramid style of layering information depth covering a wide range of sectors will be used to maximise audience engagement. This approach is based on previously successful interactions with the public at science festivals, where the overarching basic information is explained in an engaging way to ensure that everyone, including children, can understand while also providing opportunities for those with particular interests, to probe in greater detail into the specifics e.g. how biofilms might affect them directly and how research is helping.
Impact This project included website design and content creation for 98 pages of a new biofilms educational resource. Fifty-five volunteers with biofilm expertise contributed content to the site, with participation being open to anyone with sufficient knowledge. We utilised the NBIC network to approach experts in particular fields and conducted peer review on the submitted content. We also included links to appropriate games and educational resources within the site. We demonstrated and promoted the website at the 2021 Norwich Science Festival as well as via an online social media campaign. Our aim was to improve awareness and understanding of biofilms, where they are found, if they are useful or harmful and how they are controlled. The Norwich Science Festival saw approximately 500 visitors to the Quadram Institute activities, with most not knowing what a biofilm was prior to attending. The website has had the following reach (the peak in Dec/Jan is due to the social media campaign run in collaboration with the Microbattle project). Interviews held at the Norwich Science Festival with attendees and via peer review of the finished site have provided a very positive response. However, the average engagement time is considered relatively low and could be improved upon. We have received no comments from the online contact us form (but have checked that it is working). The site can easily be found on a Google search but visibility and engagement could be improved if it was used in academic situations. In order for the website to be considered a complete success further time and financial investment on publicity and updates will be required.
Start Year 2020
 
Description NBIC PE&O Award: Bringing biofilms to the masses (Leighann Sherry) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding.
Collaborator Contribution The overarching aim of the event is to provide educational outreach activities to invested members of the biofilm community. The specific elements to the event is to provide a direct point of contact for delegates to meet and discuss biofilm activities with the UoG team, and to develop and understand the variety of activities that can be delivered to different age groups of the public or within educational establishments. We will purchase a sponsor stand at Eurobiofilms 2019, appropriate demonstration material, and a Barracuda display stand. A member of the team will populate the stand throughout the meeting, demonstrate activities (which may include 'Monsters in the Mouth [inset]) and materials that we have developed at a number of events (Glasgow Science Centre, Ikea, Glasgow Primary Schools). We will also purchase and demonstrate the capabilities of Foldscopes (https://www.foldscope.com/) with dental plaque. We will also data gather from delegates of other suitable activities that they are able to share. We will collect and collate this information and interact with ResearchFish and NBIC to provide free sharable educational and public engagement material for biofilm friendly people. We will also integrate new activities into our existing portfolio of outreach in Glasgow and the West.
Impact The following activities were organised for Eurobiofilms 2019: 'Pin the bug on the person': Have a carboard cut out of a figure and different types of bugs with an associated description. Participants must pin the bug where they think they are most likely to find the organism in the body. 'Bacteria kerplunk': Life size board game illustrating the treatment of biofilms. Sticks = matrix, balls = drugs and bacteria cut outs sit at the bottom of the structure, highlighting the difficulty in drugs reaching them. 'Engaging girls in STEM': Small groups of high school pupils come into the lab and observe biofilms under the microscope. Some of these students come back over the summer and screen novel agents against biofilms. 'Biofilm fortresses': Use lego bricks to build a biofilm and then invite participants to knock them down with water pistols, soft balls etc. 'Paper microscopes': Use of foldscopes (paper microscopes) to view morphologies of various microorganisms. Swabs of the oral cavity can innoculated onto a slide and can then be viewed by children. With some guidance, children can self inoculate, load and view slides. Target age group is 9-12 year olds. Children's book about Pseu, who escapes predation by forming a biofilm. 'Coccus pocus 2019': Thanks to a generous outreach grant from NBIC, we will launch a thrilling scary story competition about microbial biofilms and antimicrobial resistance this Autumn: Coccus Pocus 2019!!! The competition will be open to schoolchildren +12 and university students. This will help raising public awareness about these crucial topics and boost student enthusiasm about microbiology. Prizes will include book gift vouchers up to £60 for the best 5 stories. There will be a prize awarding event near Halloween. This will run for first time this year, so I do not have any feedback data yet. 'Building biofilms': Children are given different coloured Play-Doh to construct different shapes of bacteria. They can then build these into a biofilm in a petri dish, on model teeth, or within any other container. Alternatively fimo (bakeable clay) can be used to create the different shapes but this needs baking to harden. With younger children we have used larger pompoms, sticky eyes, pipe cleaners etc. With tailoring works well with 3-9 years old. 'Edible biofilms': Kids make their own biofilms by using a range of sweets that represent different organisms and components of a biofilm e.g. red jelly beans = persister cells, jelly = matrix, laces = hyphae. This is all contained within a petri dish allowing kids to take them home and discuss with family. This is targeted at 7-11 year olds. 'Bacteria sock puppets': As the title suggests, participants makes there own bacteria using a sock. Pipe cleaners, beads, wool can all be added to represent different parts of the cell. 'Mini-microbes': Participants build their own biofilm from lego and then choose a way of destroying it. 'Creating books': Author of 'Pourquoi elle monte ma mayonnaise?' and 'Les Perles d'Einstein' 'Pipetting station': Participants practice using pipettes by measuring out a safe substance e.g. milk. This is to give an initial interaction to young pupils in the field of science.
Start Year 2019
 
Description NBIC PE&O Award: Coccus Pocus 2019 (Georgios Efthimiou) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution A horror sci-fi short story competition highlighting the importance of antibiotic resistance and biofilms. In an ambitious attempt to inform young people about the importance of antibiotic resistance and microbial biofilms, we will organise a horror sci-fi short story competition for this Halloween (31/10/2019), named Coccus Pocus 2019. The participants will be encouraged to write an engaging scary story, incorporating valid scientific information about AMR and biofilms. This will motivate them to read about these topics, understand the basic principles and use this information in their post-apocalyptic horror scenarios, in an educational and enjoyable way. The event can be hosted again next year (if we secure new funding) or it can be replicated by other universities, ensuring a wider outreach and a stronger impact.
Impact The competition went very well and received good feedback and publicity! Few examples: https://microbiologysociety.org/blog/coccus-pocus-2019-an-exciting-scary-story-competition-about-biofilms-and-antimicrobial-resistance.html https://www.biofilms.ac.uk/coccus-pocus-2019-a-microbiology-inspired-scary-story-competition/ https://www.microbiologyresearch.org/content/journal/acmi/10.1099/acmi.ac2020.po0074 The evaluation committee that was composed of eight academics and researchers from the University of Hull and other institutions, ranked the stories according to intrigue of their plot, use of language, character description and scientific soundness. The prizes (online gift vouchers) were awarded to the three winning stories, during an awards ceremony. Feedback questionnaires were completed by the participants, which showed that they all found the competition very interesting and useful, allowing them to sharpen their creative writing skills and explore key microbiology topics. The event was communicated in the social media and blogs were posted in university bulletins and on microbiology websites. It is our ambition that the competition will be held again and again around the country, aiming to increase public awareness about the important problem of antimicrobial resistance and biofilms and boost the enthusiasm of young people about the fascinating field of microbiology.
Start Year 2019
 
Description NBIC PE&O Award: Coccus Pocus 2019 (Georgios Efthimiou) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding.
Collaborator Contribution A horror sci-fi short story competition highlighting the importance of antibiotic resistance and biofilms. In an ambitious attempt to inform young people about the importance of antibiotic resistance and microbial biofilms, we will organise a horror sci-fi short story competition for this Halloween (31/10/2019), named Coccus Pocus 2019. The participants will be encouraged to write an engaging scary story, incorporating valid scientific information about AMR and biofilms. This will motivate them to read about these topics, understand the basic principles and use this information in their post-apocalyptic horror scenarios, in an educational and enjoyable way. The event can be hosted again next year (if we secure new funding) or it can be replicated by other universities, ensuring a wider outreach and a stronger impact.
Impact The competition went very well and received good feedback and publicity! Few examples: https://microbiologysociety.org/blog/coccus-pocus-2019-an-exciting-scary-story-competition-about-biofilms-and-antimicrobial-resistance.html https://www.biofilms.ac.uk/coccus-pocus-2019-a-microbiology-inspired-scary-story-competition/ https://www.microbiologyresearch.org/content/journal/acmi/10.1099/acmi.ac2020.po0074 The evaluation committee that was composed of eight academics and researchers from the University of Hull and other institutions, ranked the stories according to intrigue of their plot, use of language, character description and scientific soundness. The prizes (online gift vouchers) were awarded to the three winning stories, during an awards ceremony. Feedback questionnaires were completed by the participants, which showed that they all found the competition very interesting and useful, allowing them to sharpen their creative writing skills and explore key microbiology topics. The event was communicated in the social media and blogs were posted in university bulletins and on microbiology websites. It is our ambition that the competition will be held again and again around the country, aiming to increase public awareness about the important problem of antimicrobial resistance and biofilms and boost the enthusiasm of young people about the fascinating field of microbiology.
Start Year 2019
 
Description NBIC PE&O Award: MicroBattle - Strategy Card Game (Rebecca Thompson) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution The aim of the 'MicroBattle' project is to develop a strategy-based card game with accompanying online materials that communicates the importance of bacterial diversity within biofilms beyond their context as pathogens. The project will also highlight the role of biofilms in ecological niche occupation by symbionts, archaea and other organisms. Character artwork for specific microbes will be heavily stylised to make the game fun and engaging, while at the same time translating the canonical biology into easy-to-understand images. Using exemplar microbes and particular game mechanics will allow core microbiological concepts to be introduced and demonstrated, such as the role of biofilm formation in increasing bacterial resistance to antibiotics and environmental stressors. Twitter, Instagram and YouTube will be used to gain feedback from potential users, e.g. on the illustrations, and to showcase game development through demonstration. Small webtoons (budget-dependent) will be illustrated to communicate single concepts in an appealing way. Social media will also allow us to monitor reach, outcomes and impact. Whilst the game can be printed off for public use and widely distributed by NBIC and QIB as free downloads, a physical product will also be demonstrated online and at targeted live public engagement events.
Impact This project included the targeting, developing, testing and releasing of a strategy-based card game that communicates the importance of bacterial diversity within biofilms and the role of biofilms in resistance to antibiotics and environmental stresses. The game remains freely available for online download and high-quality printed versions were given to various educators during live demonstrations and 'battles' held at the Norwich Science Festival in 2021. The Norwich Science Festival saw approximately 500 attendees to the Quadram Institute tables. We gave out approximately 250 microbattle puzzle siders (containing the game download via a QR code link) to children and 5 professionally printed card packs to educators. Our volunteers spoke with the children and their parents about what biofilms are and how they protect the microbial communities. A spot survey showed that 9/10 people asked did not know what a biofilm was before participating so there was a recordable improvement in knowledge as well as observations of enhanced understanding and engagement with this activity. Social media was heavily exploited to promote the game development, receive feedback and to disseminate the download links. We also ran a 'Design my Synthia' competition where children designed one of the cards within the pack. Using organic posts on Instagram, Twitter, LinkedIn and Facebook to discuss both NBIC public engagement projects we accumulated 14,147 impressions, 314 engagements and 5 comments. Using paid promotion on Twitter we accumulated a further 37,502 impressions and 59 clicked links to the post. Using paid promotion on Facebook we reached 23,160 people with 35,344 additional impressions and 253 persons engaged with the posts. This level of engagement with the topic on social media represents a good value of return on the NBIC investment and we were able to initiate and observe discussions on the subject with and between members of the public. Accessibility and increased reach: using this holistic approach (online downloads and a face-to-face event combined with social media outreach) reached stakeholders that could not attend the festival from Norfolk and far beyond. During the Norwich Science Festival, the highest retention was with parents and children who were already familiar with similar games. Introducing the concept of the game, as well as biofilms and quorum sensing using A. fischeri (a featured microbe character) in Hawaiian bobtail squid was most successful. The game itself was played mainly with children age ~7-11. The design competition had 13 entries and the winner was given a £50 Amazon voucher. The announcement of the winning design on Twitter received 438 views. It is important to note that all the illustrations and the game concept can be used in future science communication activities linked to feature the microbes or game mechanics. Interviews held at the Norwich Science Festival with game participants provided a very positive response to both the idea and the playability of the game. Adjustments were made early on, based on feedback received by testers, to allow for a simpler, cut-down version more suitable for a younger age bracket. Learning point: the children aged 5-9 were extremely engaged with the puzzle sliders! We also received feedback from parents who wanted to rather have the game digitally, build it within existing sandbox style games or as a VR game format. The game can be downloaded: https://quadram.ac.uk/get-involved/engage-with-science/ The tutorial can be found https://www.youtube.com/watch?v=RRXNMztcUyg The Microsoft Team with all documents and files can be found here. https://teams.microsoft.com/l/team/19%3aa56f14d6050e44978929396a105005d7%40thread.tacv2/conversations?groupId=3d83a3a9-299f-4e4a-9f82-49e3147a8838&tenantId=e652efd4-5dac-41b6-a23d-764634c36cea
Start Year 2020
 
Description NBIC PE&O Award: MicroBattle - Strategy Card Game (Rebecca Thompson) 
Organisation Quadram Institute Bioscience
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding.
Collaborator Contribution The aim of the 'MicroBattle' project is to develop a strategy-based card game with accompanying online materials that communicates the importance of bacterial diversity within biofilms beyond their context as pathogens. The project will also highlight the role of biofilms in ecological niche occupation by symbionts, archaea and other organisms. Character artwork for specific microbes will be heavily stylised to make the game fun and engaging, while at the same time translating the canonical biology into easy-to-understand images. Using exemplar microbes and particular game mechanics will allow core microbiological concepts to be introduced and demonstrated, such as the role of biofilm formation in increasing bacterial resistance to antibiotics and environmental stressors. Twitter, Instagram and YouTube will be used to gain feedback from potential users, e.g. on the illustrations, and to showcase game development through demonstration. Small webtoons (budget-dependent) will be illustrated to communicate single concepts in an appealing way. Social media will also allow us to monitor reach, outcomes and impact. Whilst the game can be printed off for public use and widely distributed by NBIC and QIB as free downloads, a physical product will also be demonstrated online and at targeted live public engagement events.
Impact This project included the targeting, developing, testing and releasing of a strategy-based card game that communicates the importance of bacterial diversity within biofilms and the role of biofilms in resistance to antibiotics and environmental stresses. The game remains freely available for online download and high-quality printed versions were given to various educators during live demonstrations and 'battles' held at the Norwich Science Festival in 2021. The Norwich Science Festival saw approximately 500 attendees to the Quadram Institute tables. We gave out approximately 250 microbattle puzzle siders (containing the game download via a QR code link) to children and 5 professionally printed card packs to educators. Our volunteers spoke with the children and their parents about what biofilms are and how they protect the microbial communities. A spot survey showed that 9/10 people asked did not know what a biofilm was before participating so there was a recordable improvement in knowledge as well as observations of enhanced understanding and engagement with this activity. Social media was heavily exploited to promote the game development, receive feedback and to disseminate the download links. We also ran a 'Design my Synthia' competition where children designed one of the cards within the pack. Using organic posts on Instagram, Twitter, LinkedIn and Facebook to discuss both NBIC public engagement projects we accumulated 14,147 impressions, 314 engagements and 5 comments. Using paid promotion on Twitter we accumulated a further 37,502 impressions and 59 clicked links to the post. Using paid promotion on Facebook we reached 23,160 people with 35,344 additional impressions and 253 persons engaged with the posts. This level of engagement with the topic on social media represents a good value of return on the NBIC investment and we were able to initiate and observe discussions on the subject with and between members of the public. Accessibility and increased reach: using this holistic approach (online downloads and a face-to-face event combined with social media outreach) reached stakeholders that could not attend the festival from Norfolk and far beyond. During the Norwich Science Festival, the highest retention was with parents and children who were already familiar with similar games. Introducing the concept of the game, as well as biofilms and quorum sensing using A. fischeri (a featured microbe character) in Hawaiian bobtail squid was most successful. The game itself was played mainly with children age ~7-11. The design competition had 13 entries and the winner was given a £50 Amazon voucher. The announcement of the winning design on Twitter received 438 views. It is important to note that all the illustrations and the game concept can be used in future science communication activities linked to feature the microbes or game mechanics. Interviews held at the Norwich Science Festival with game participants provided a very positive response to both the idea and the playability of the game. Adjustments were made early on, based on feedback received by testers, to allow for a simpler, cut-down version more suitable for a younger age bracket. Learning point: the children aged 5-9 were extremely engaged with the puzzle sliders! We also received feedback from parents who wanted to rather have the game digitally, build it within existing sandbox style games or as a VR game format. The game can be downloaded: https://quadram.ac.uk/get-involved/engage-with-science/ The tutorial can be found https://www.youtube.com/watch?v=RRXNMztcUyg The Microsoft Team with all documents and files can be found here. https://teams.microsoft.com/l/team/19%3aa56f14d6050e44978929396a105005d7%40thread.tacv2/conversations?groupId=3d83a3a9-299f-4e4a-9f82-49e3147a8838&tenantId=e652efd4-5dac-41b6-a23d-764634c36cea
Start Year 2020
 
Description NBIC PE&O Award: Moving Mucus Battles Biofilms (Katie Horton) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution I want to collaborate with Animate Your Science to create a simple infographic to improve understanding of respiratory physiology in health and disease and to raise awareness of biofilm infections in PCD, CF and COPD. 'Moving Mucus', or lack thereof, will be used to explain how the lung 'Battles Biofilms'. Content will be guided by patients and their families to ensure that we address important questions, give meaningful answers and tailor it appropriately to a lay audience. Suggested topics thus far include: • What is the mucociliary escalator? • What diseases cause the mucociliary escalator to not work properly? • What is a biofilm infection and why is it bad? • How can we prevent and treat biofilm infection? • What research needs to be done? Main aims are to: • Educate about respiratory physiology in health and disease • Increase awareness of biofilms • Emphasise the importance of physiotherapy and medication adherence to reduce chances or persistence of infection • Get people actively engaging in research (answering surveys, providing samples e.t.c.) This resource will be used for: • Meet the Scientist • Pint of Science • PCD Live • New Forest and Hampshire County Show • The Brilliant Club tutorial sessions • Promotion on Twitter
Impact None yet.
Start Year 2021
 
Description NBIC PE&O Award: Moving Mucus Battles Biofilms (Katie Horton) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding.
Collaborator Contribution I want to collaborate with Animate Your Science to create a simple infographic to improve understanding of respiratory physiology in health and disease and to raise awareness of biofilm infections in PCD, CF and COPD. 'Moving Mucus', or lack thereof, will be used to explain how the lung 'Battles Biofilms'. Content will be guided by patients and their families to ensure that we address important questions, give meaningful answers and tailor it appropriately to a lay audience. Suggested topics thus far include: • What is the mucociliary escalator? • What diseases cause the mucociliary escalator to not work properly? • What is a biofilm infection and why is it bad? • How can we prevent and treat biofilm infection? • What research needs to be done? Main aims are to: • Educate about respiratory physiology in health and disease • Increase awareness of biofilms • Emphasise the importance of physiotherapy and medication adherence to reduce chances or persistence of infection • Get people actively engaging in research (answering surveys, providing samples e.t.c.) This resource will be used for: • Meet the Scientist • Pint of Science • PCD Live • New Forest and Hampshire County Show • The Brilliant Club tutorial sessions • Promotion on Twitter
Impact None yet.
Start Year 2021
 
Description NBIC PE&O Award: Our Micro-World (Samantha McLean) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution Our Micro-World: Understanding the microbial world around us. Event.
Impact Unfortunately no impact - this event was cancelled due to the covid-19 lockdown.
Start Year 2020
 
Description NBIC PE&O Award: Our Micro-World (Samantha McLean) 
Organisation Nottingham Trent University
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding.
Collaborator Contribution Our Micro-World: Understanding the microbial world around us. Event.
Impact Unfortunately no impact - this event was cancelled due to the covid-19 lockdown.
Start Year 2020
 
Description NBIC PE&O Award: PE012 Unruly Objects and Living Paints (Suzie Hingley-Wilson) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Target audience: This work will be showcased primarily at the V and A museum and in media streams. We aim to reach international arts audiences, museum audiences, conservators, science audiences, audiences of all ages including young people and older audiences. Dumitriu's work has reached audiences of hundreds of thousands in 2021 via museum shows, TV and media). The Hingley-Wilson and Keddie laboratories are also adept in outreach, with the Hingley-Wilson lab previously exhibiting at the Science museum and UKRI annual conference. The Leverhulme-funded teams biocoating work is also a previous Microbiology Society case study (Painting with bacteria could capture carbon and yield biofuels for a sustainable energy supply | Microbiology Society) Project description: Biocoatings are a type of artificial biofilm comprised of bacteria and synthetic colloidal substrates utilised for bioremediation, eg biocatalytists in wastewater treatment or carbon capture. The interdisciplinary UofS team use nanotubes and synthetic colloidal substrates to enhance viability (Chen et al., 2019, also a short part NBIC funded project with industry). We propose to work with internationally renowned artist Anna Dumitriu whose work focuses on the interface of biology and art to develop a new artwork building on her successful "Unruly Objects and Biological Conservation" (carried out in collaboration with the University of Western Attica and conservation experts at University of the Arts London and University College London), which explores the relationship of conservation of antiquities and living biological sculptures as in https://annadumitriu.co.uk/portfolio/unruly-objects/. Simone Krings, a Leverhulme funded PhD student will utilise her cyanobacterial biocoatings for a verdant palette of carbon capturing living paints.
Collaborator Contribution The final artwork will be showcased in a high impact event at the Victoria and Albert Museum in London, as part of their physical digital programme between May and November 2022, presented in an online streamed event, via social media, websites and supported by the University of Surrey marketing team.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE012 Unruly Objects and Living Paints (Suzie Hingley-Wilson) 
Organisation University of Surrey
Country United Kingdom 
Sector Academic/University 
PI Contribution Target audience: This work will be showcased primarily at the V and A museum and in media streams. We aim to reach international arts audiences, museum audiences, conservators, science audiences, audiences of all ages including young people and older audiences. Dumitriu's work has reached audiences of hundreds of thousands in 2021 via museum shows, TV and media). The Hingley-Wilson and Keddie laboratories are also adept in outreach, with the Hingley-Wilson lab previously exhibiting at the Science museum and UKRI annual conference. The Leverhulme-funded teams biocoating work is also a previous Microbiology Society case study (Painting with bacteria could capture carbon and yield biofuels for a sustainable energy supply | Microbiology Society) Project description: Biocoatings are a type of artificial biofilm comprised of bacteria and synthetic colloidal substrates utilised for bioremediation, eg biocatalytists in wastewater treatment or carbon capture. The interdisciplinary UofS team use nanotubes and synthetic colloidal substrates to enhance viability (Chen et al., 2019, also a short part NBIC funded project with industry). We propose to work with internationally renowned artist Anna Dumitriu whose work focuses on the interface of biology and art to develop a new artwork building on her successful "Unruly Objects and Biological Conservation" (carried out in collaboration with the University of Western Attica and conservation experts at University of the Arts London and University College London), which explores the relationship of conservation of antiquities and living biological sculptures as in https://annadumitriu.co.uk/portfolio/unruly-objects/. Simone Krings, a Leverhulme funded PhD student will utilise her cyanobacterial biocoatings for a verdant palette of carbon capturing living paints.
Collaborator Contribution The final artwork will be showcased in a high impact event at the Victoria and Albert Museum in London, as part of their physical digital programme between May and November 2022, presented in an online streamed event, via social media, websites and supported by the University of Surrey marketing team.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE012 Unruly Objects and Living Paints (Suzie Hingley-Wilson) 
Organisation Victoria and Albert Museum
Country United Kingdom 
Sector Public 
PI Contribution Target audience: This work will be showcased primarily at the V and A museum and in media streams. We aim to reach international arts audiences, museum audiences, conservators, science audiences, audiences of all ages including young people and older audiences. Dumitriu's work has reached audiences of hundreds of thousands in 2021 via museum shows, TV and media). The Hingley-Wilson and Keddie laboratories are also adept in outreach, with the Hingley-Wilson lab previously exhibiting at the Science museum and UKRI annual conference. The Leverhulme-funded teams biocoating work is also a previous Microbiology Society case study (Painting with bacteria could capture carbon and yield biofuels for a sustainable energy supply | Microbiology Society) Project description: Biocoatings are a type of artificial biofilm comprised of bacteria and synthetic colloidal substrates utilised for bioremediation, eg biocatalytists in wastewater treatment or carbon capture. The interdisciplinary UofS team use nanotubes and synthetic colloidal substrates to enhance viability (Chen et al., 2019, also a short part NBIC funded project with industry). We propose to work with internationally renowned artist Anna Dumitriu whose work focuses on the interface of biology and art to develop a new artwork building on her successful "Unruly Objects and Biological Conservation" (carried out in collaboration with the University of Western Attica and conservation experts at University of the Arts London and University College London), which explores the relationship of conservation of antiquities and living biological sculptures as in https://annadumitriu.co.uk/portfolio/unruly-objects/. Simone Krings, a Leverhulme funded PhD student will utilise her cyanobacterial biocoatings for a verdant palette of carbon capturing living paints.
Collaborator Contribution The final artwork will be showcased in a high impact event at the Victoria and Albert Museum in London, as part of their physical digital programme between May and November 2022, presented in an online streamed event, via social media, websites and supported by the University of Surrey marketing team.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE013 On the Buses with the Micro-Passengers (Sandra Wilks) 
Organisation Go South Coast Ltd
Department Bluestar Buses
Country United Kingdom 
Sector Private 
PI Contribution Microorganisms exist almost everywhere - in and on our bodies and in spaces of work, leisure and travel - and are a vital part of our everyday world. However, there is a lack of understanding of risk and the presence of microbial communities in public spaces and this has been increased through the COVID-19 pandemic. Using public bus transport as an example, we intend to use an interdisciplinary and creative approach to produce material to help people understand the complex relationship that we have with these invisible microorganisms. Using data collected from an environmental microbiome study carried out on buses, we will produce a series of cartoons to explain microbial risk and presence in a fun and engaging way, while reinforcing public health messaging. The Micro-Passenger cartoon series will help people to understand how we are surrounded by a microbial landscape, and they are more than 'bad or good bugs'. They will encourage deeper engagement with our own microbial populations, as well as responding to increased societal concerns around hygiene. The cartoons will be used for media related to passengers and staff, through transport company partners and passenger organisations, and for the general public through wider social media platforms.
Collaborator Contribution As outlined above.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE013 On the Buses with the Micro-Passengers (Sandra Wilks) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Microorganisms exist almost everywhere - in and on our bodies and in spaces of work, leisure and travel - and are a vital part of our everyday world. However, there is a lack of understanding of risk and the presence of microbial communities in public spaces and this has been increased through the COVID-19 pandemic. Using public bus transport as an example, we intend to use an interdisciplinary and creative approach to produce material to help people understand the complex relationship that we have with these invisible microorganisms. Using data collected from an environmental microbiome study carried out on buses, we will produce a series of cartoons to explain microbial risk and presence in a fun and engaging way, while reinforcing public health messaging. The Micro-Passenger cartoon series will help people to understand how we are surrounded by a microbial landscape, and they are more than 'bad or good bugs'. They will encourage deeper engagement with our own microbial populations, as well as responding to increased societal concerns around hygiene. The cartoons will be used for media related to passengers and staff, through transport company partners and passenger organisations, and for the general public through wider social media platforms.
Collaborator Contribution As outlined above.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE013 On the Buses with the Micro-Passengers (Sandra Wilks) 
Organisation Newcastle University
Department Newcastle University Medical School
Country United Kingdom 
Sector Academic/University 
PI Contribution Microorganisms exist almost everywhere - in and on our bodies and in spaces of work, leisure and travel - and are a vital part of our everyday world. However, there is a lack of understanding of risk and the presence of microbial communities in public spaces and this has been increased through the COVID-19 pandemic. Using public bus transport as an example, we intend to use an interdisciplinary and creative approach to produce material to help people understand the complex relationship that we have with these invisible microorganisms. Using data collected from an environmental microbiome study carried out on buses, we will produce a series of cartoons to explain microbial risk and presence in a fun and engaging way, while reinforcing public health messaging. The Micro-Passenger cartoon series will help people to understand how we are surrounded by a microbial landscape, and they are more than 'bad or good bugs'. They will encourage deeper engagement with our own microbial populations, as well as responding to increased societal concerns around hygiene. The cartoons will be used for media related to passengers and staff, through transport company partners and passenger organisations, and for the general public through wider social media platforms.
Collaborator Contribution As outlined above.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE013 On the Buses with the Micro-Passengers (Sandra Wilks) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Microorganisms exist almost everywhere - in and on our bodies and in spaces of work, leisure and travel - and are a vital part of our everyday world. However, there is a lack of understanding of risk and the presence of microbial communities in public spaces and this has been increased through the COVID-19 pandemic. Using public bus transport as an example, we intend to use an interdisciplinary and creative approach to produce material to help people understand the complex relationship that we have with these invisible microorganisms. Using data collected from an environmental microbiome study carried out on buses, we will produce a series of cartoons to explain microbial risk and presence in a fun and engaging way, while reinforcing public health messaging. The Micro-Passenger cartoon series will help people to understand how we are surrounded by a microbial landscape, and they are more than 'bad or good bugs'. They will encourage deeper engagement with our own microbial populations, as well as responding to increased societal concerns around hygiene. The cartoons will be used for media related to passengers and staff, through transport company partners and passenger organisations, and for the general public through wider social media platforms.
Collaborator Contribution As outlined above.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE014 Hands on Biofilms! (Joanna Verran) 
Organisation British Fashion Council
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Bacterial cellulose (BC) is generated as micro- (or nano-) fibrils as a mat, or pellicle, on the surface of a liquid culture. This structure is a readily accessible, and easily generated biofilm. The best-known form of BC is Kombucha, a fermented tea drink prepared by placing the tea fungus (starter / mother culture/SCOBY - Symbiotic Culture Of Bacteria and Yeast) into a tea broth. The resultant drink has a pleasant flavour; the pellicle/biofilm is on the surface. BC has been explored as an alternative textile ('vegetable leather'), but there are barriers to implementation, including a lack of knowledge regarding the optimum conditions required to grow reproducible biofilm1. Aims: 1. To acquaint audiences with biofilm using Kombucha, and by building models of biofilms using Bunchems2. 2. To engage audiences in discussion regarding sustainability goals (SDG12) and the use of vegetable leather as an alternative fabric by examining (and stitching) examples. 3. To raise awareness of the value of fungi in our world by providing food samples3 (COVID-dependent) 4. To acquire data regarding the properties of home-made Kombucha biofilms by providing the audience members with 'grow-your-own' kits and encouraging feedback on properties of the pellicles to support MMU research (citizen science). Expected completion date(s): The main event will take place as part of Manchester Science Festival (October 2022). Smaller preparatory events will take place earlier in the year (likely March [school event] and July [AdvanceHE conference workshop]), where findings will inform activities, interactions and evaluation.
Collaborator Contribution The Science and Industry Museum in Manchester have indicated their willingness to work with the team in order to deliver the event during Manchester Science Festival.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE014 Hands on Biofilms! (Joanna Verran) 
Organisation Manchester Metropolitan University
Country United Kingdom 
Sector Academic/University 
PI Contribution Bacterial cellulose (BC) is generated as micro- (or nano-) fibrils as a mat, or pellicle, on the surface of a liquid culture. This structure is a readily accessible, and easily generated biofilm. The best-known form of BC is Kombucha, a fermented tea drink prepared by placing the tea fungus (starter / mother culture/SCOBY - Symbiotic Culture Of Bacteria and Yeast) into a tea broth. The resultant drink has a pleasant flavour; the pellicle/biofilm is on the surface. BC has been explored as an alternative textile ('vegetable leather'), but there are barriers to implementation, including a lack of knowledge regarding the optimum conditions required to grow reproducible biofilm1. Aims: 1. To acquaint audiences with biofilm using Kombucha, and by building models of biofilms using Bunchems2. 2. To engage audiences in discussion regarding sustainability goals (SDG12) and the use of vegetable leather as an alternative fabric by examining (and stitching) examples. 3. To raise awareness of the value of fungi in our world by providing food samples3 (COVID-dependent) 4. To acquire data regarding the properties of home-made Kombucha biofilms by providing the audience members with 'grow-your-own' kits and encouraging feedback on properties of the pellicles to support MMU research (citizen science). Expected completion date(s): The main event will take place as part of Manchester Science Festival (October 2022). Smaller preparatory events will take place earlier in the year (likely March [school event] and July [AdvanceHE conference workshop]), where findings will inform activities, interactions and evaluation.
Collaborator Contribution The Science and Industry Museum in Manchester have indicated their willingness to work with the team in order to deliver the event during Manchester Science Festival.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE014 Hands on Biofilms! (Joanna Verran) 
Organisation Museum of Science and Industry (MOSI)
Country United Kingdom 
Sector Public 
PI Contribution Bacterial cellulose (BC) is generated as micro- (or nano-) fibrils as a mat, or pellicle, on the surface of a liquid culture. This structure is a readily accessible, and easily generated biofilm. The best-known form of BC is Kombucha, a fermented tea drink prepared by placing the tea fungus (starter / mother culture/SCOBY - Symbiotic Culture Of Bacteria and Yeast) into a tea broth. The resultant drink has a pleasant flavour; the pellicle/biofilm is on the surface. BC has been explored as an alternative textile ('vegetable leather'), but there are barriers to implementation, including a lack of knowledge regarding the optimum conditions required to grow reproducible biofilm1. Aims: 1. To acquaint audiences with biofilm using Kombucha, and by building models of biofilms using Bunchems2. 2. To engage audiences in discussion regarding sustainability goals (SDG12) and the use of vegetable leather as an alternative fabric by examining (and stitching) examples. 3. To raise awareness of the value of fungi in our world by providing food samples3 (COVID-dependent) 4. To acquire data regarding the properties of home-made Kombucha biofilms by providing the audience members with 'grow-your-own' kits and encouraging feedback on properties of the pellicles to support MMU research (citizen science). Expected completion date(s): The main event will take place as part of Manchester Science Festival (October 2022). Smaller preparatory events will take place earlier in the year (likely March [school event] and July [AdvanceHE conference workshop]), where findings will inform activities, interactions and evaluation.
Collaborator Contribution The Science and Industry Museum in Manchester have indicated their willingness to work with the team in order to deliver the event during Manchester Science Festival.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE014 Hands on Biofilms! (Joanna Verran) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Bacterial cellulose (BC) is generated as micro- (or nano-) fibrils as a mat, or pellicle, on the surface of a liquid culture. This structure is a readily accessible, and easily generated biofilm. The best-known form of BC is Kombucha, a fermented tea drink prepared by placing the tea fungus (starter / mother culture/SCOBY - Symbiotic Culture Of Bacteria and Yeast) into a tea broth. The resultant drink has a pleasant flavour; the pellicle/biofilm is on the surface. BC has been explored as an alternative textile ('vegetable leather'), but there are barriers to implementation, including a lack of knowledge regarding the optimum conditions required to grow reproducible biofilm1. Aims: 1. To acquaint audiences with biofilm using Kombucha, and by building models of biofilms using Bunchems2. 2. To engage audiences in discussion regarding sustainability goals (SDG12) and the use of vegetable leather as an alternative fabric by examining (and stitching) examples. 3. To raise awareness of the value of fungi in our world by providing food samples3 (COVID-dependent) 4. To acquire data regarding the properties of home-made Kombucha biofilms by providing the audience members with 'grow-your-own' kits and encouraging feedback on properties of the pellicles to support MMU research (citizen science). Expected completion date(s): The main event will take place as part of Manchester Science Festival (October 2022). Smaller preparatory events will take place earlier in the year (likely March [school event] and July [AdvanceHE conference workshop]), where findings will inform activities, interactions and evaluation.
Collaborator Contribution The Science and Industry Museum in Manchester have indicated their willingness to work with the team in order to deliver the event during Manchester Science Festival.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: PE015 Biofilm awareness in farming (Sarah Dusgate) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Pruex have a three fold strategy; Find, Fix and Tell. We FIND the cause of disease on farms and identify biofilms present in livestock environments with an initial swabbing. We FIX the cause of the problem found in the initial swabbing by using our range of non-infective bacteria products to reduce disease causing biofilms on farms and dominate with beneficial biofilms to improve the health and welfare of farm animals. We TELL the good work being done within British agriculture to consumers and other farmers. We are applying for the Public Engagement and Outreach grant to help develop the 'Tell' strategy within our business. Our project will entail the planning, production and dissemination of a series of 4 videos. The videos will raise awareness of biofilms on farms; with a particular focus on water quality. The videos will be shared throughout Pruex's social media channels as well as with farmer organisations.
Collaborator Contribution NBIC are providing funding for Purex to carry out this project.
Impact None yet.
Start Year 2022
 
Description NBIC PE&O Award: Power-FULL Biofilms (Pavlina Theodosiou) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution Power-FULL Biofilms intents to bring to schools an interactive workshop which will enthuse, inspire, and engage children with the world of Microbial Fuel Cells (MFCs). MFCs turn organic matter or waste into electricity through electroactive biofilms, that as part of their metabolism release electrons. The project investigates the possibility of producing electricity from waste (mud from the school ground) and using the harnessed electricity to power a small gadget. The students during this 5-week workshop series will build their own MFCs, inoculate them using mud, feed them with nutrients and monitor their growth by recording their voltage output. At the end of the 5-weeks the students will connect the MFCs electrically and see if they can power-up a small gadget. This workshop series will introduce the kids to microbiology, biofilm growth, electricity, engineering, renewable energy and experimental design. This workshop can be both delivered inside and outside the classroom, to comply with COVID restrictions with the assistance of the lead applicant and student ambassadors. Schools now are lacking enrichment activities, so this project is very timely. Power-FULL Biofilms is a hands-on workshop series accompanied by weekly interactive presentation sessions which will encourage the children to think scientifically about problem solving.
Impact None yet.
Start Year 2021
 
Description NBIC PE&O Award: Power-FULL Biofilms (Pavlina Theodosiou) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding.
Collaborator Contribution Power-FULL Biofilms intents to bring to schools an interactive workshop which will enthuse, inspire, and engage children with the world of Microbial Fuel Cells (MFCs). MFCs turn organic matter or waste into electricity through electroactive biofilms, that as part of their metabolism release electrons. The project investigates the possibility of producing electricity from waste (mud from the school ground) and using the harnessed electricity to power a small gadget. The students during this 5-week workshop series will build their own MFCs, inoculate them using mud, feed them with nutrients and monitor their growth by recording their voltage output. At the end of the 5-weeks the students will connect the MFCs electrically and see if they can power-up a small gadget. This workshop series will introduce the kids to microbiology, biofilm growth, electricity, engineering, renewable energy and experimental design. This workshop can be both delivered inside and outside the classroom, to comply with COVID restrictions with the assistance of the lead applicant and student ambassadors. Schools now are lacking enrichment activities, so this project is very timely. Power-FULL Biofilms is a hands-on workshop series accompanied by weekly interactive presentation sessions which will encourage the children to think scientifically about problem solving.
Impact None yet.
Start Year 2021
 
Description NBIC PE&O Award: Promoting awareness of Nano Science and technology capabilities in preventing biofilm formation and bacterial growth (Faradin Mirkhalaf) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Funding.
Collaborator Contribution Shimyatech Ltd has designed training programs for promoting Nanoscience and Nanotechnology and their applications (i.e. Nano/Bio-Films) by offering educational course package comprised of workshops at two levels of fundamentals and advanced skills. A successful programme was initiated on "NanoBiomaterials" in November 2019, and the new programme is aiming to extend our offering to a wider audience and with specific focus on "NanoFilms" and their applications in anti-biofilm surfaces. The first part of the programme will cover fundamentals and basic concepts of the subject preparing the learners for the second advanced and practice based stage. Based on our initial experience and through some early market research we have identified younger generation, especially A-Level students to be a highly appealing group to engage with this line of science and technology. As such, we believe providing a number of sponsored places in our first workshop can provide a strong ground for public engagement and promote the missions and objectives of the NBIC network to the society. The proposal therefore will be for NBIC to sponsor places for six students to be offered to Liverpool region sixth-form institutions, which they may promote in their schools through an internal call and competition. We believe this award will induce a considerable level of awareness in the regional science education and helps attraction and development of future talents to industry and enterprising.
Impact Summary of the event: ShimyaTech Ltd has the pleasure to announce its second workshop as a part of its training programs was successfully held on Thursday 10 March at Liverpool Science Park. This was the first part (workshop A) of our full training package, Pathways to NonoWorld, in collaboration with Nano Biosols. We had 14 selected and interested local college and A level students together with their tutors attended the workshop. Speakers from ShimyaTech, Nano Biosols, Keele University and Liverpool John Moores University presented various introductory aspects of Nano and general awareness of nanotechnology and its applications in medicine, coatings and antibacterial/antibiofilm surfaces. The group discussion and quizzes made it more interactive as well as lab demonstration. The event proved successful as we received positive feedback from almost all the attendees. Announcement of the event: The workshop was announced to the public at least 3 months prior the event on our website and social media where the award was acknowledged from the date of receiving the letter (13th Feb 2020). Report and videos of the held event are being launched as well. Here are some of the details of our social media announcements: https://shimyatech.com/news-and-links/ https://www.facebook.com/ShimyatechLtd https://twitter.com/shimyatech https://www.linkedin.com/in/shimyatech-ltd Also, In addition to above, the following e-mail was sent to all local secondary schools and colleges to select most enthusiastic students for the workshop: "Dear Mr/Ms ShimyaTech & NanoBiosols, two Liverpool based leading Nanoscience and Nanotechnology firms are proud to offer a unique Training Program as part of their educational services. The package has been carefully designed to offer learners knowledge and professional skills according to their background and as fit their prior experience with the subject. We are pleased to announce limited number of free places to attend our one-day introductory workshop A of "Pathways to Nanoworld". This offer will cover registration fees (£80 each) for selected and enthusiastic students. Nanotech is an enabling technology with applications in many areas and industries and lots of future job opportunities. This workshop makes them aware of this new potential career path and opportunities in the job market with valuable addition to CV/portfolio of studies. Our sponsor, National Biofilm Innovation Centre (NBIC)" is willing to offer these places as a part of their "Public Engagement and Outreach" grants. Therefore, our aim is to select some interested students. I have attached the workshop package leaflet for your attention. This offer is for workshop A. Please let me know if you need any more information. I look forward to hearing from you soon." Selection method: We selected enthusiastic students who seek their future career related to Nanotechnology in various disciplines. Top student applications were selected from local schools and colleges by competition. The students were selected based on the merit by writing a short paragraph (maximum 200 words) to answer the following questions together with CVs: 1. Why Nano? 2. Current and future applications? 3. Why I am interested? Sample Application from a Liverpool City College A-Level Student: "I think nanotechnology is our future. From the average persons everyday use, in businesses, medicine and more. And I would like to be apart of that change. I've always wanted to be able to help others and make peoples day to day life easier and more efficient. The definition of Nano technology, according to google, is the branch of technology that deals with dimensions and tolerances of less than 100 nanometres, especially the manipulation of individual atoms and molecules. To me, this is such an interesting field of science because such small man-made technologies can have such an impact on society. The history of the development, and the funds for development, is interesting too. From investments into physics and chemistry research for the eventual emergence of nanotechnology in only 1950's. Richard Feynman (1959) predicted that microscopic would be able to arrange atoms to create complex materials that could achieve desired functions. It was Feynman prediction that raised attention to nanotechnology. Since then there has been so much progress, from atomically-thin indium-tin oxide sheets(touch screens that could make touch screens flexible, use less energy and cost less) and carbon tubes that you can spray onto flexible plastic sheets that have sensors on them that can detect when the food spoils. In the foreseeable future, there are already so many applications that are in development, such as carbon nanotubes being used in the material to build spaceships to reduce their weight and even make the material over all stronger. There are also so many applications in medicine such as drug delivery of drugs, light, heat to specific cells (such as cancer cells) to reduce the damage to our healthy cells and antibacterial treatments, which uses gold and UV to kill bacteria. This could be used to sterilise hospital equipment quickly and cheaply.
Start Year 2020
 
Description NBIC PE&O Award: Promoting awareness of Nano Science and technology capabilities in preventing biofilm formation and bacterial growth (Faradin Mirkhalaf) 
Organisation ShimyaTech Ltd
Country United Kingdom 
Sector Private 
PI Contribution Funding.
Collaborator Contribution Shimyatech Ltd has designed training programs for promoting Nanoscience and Nanotechnology and their applications (i.e. Nano/Bio-Films) by offering educational course package comprised of workshops at two levels of fundamentals and advanced skills. A successful programme was initiated on "NanoBiomaterials" in November 2019, and the new programme is aiming to extend our offering to a wider audience and with specific focus on "NanoFilms" and their applications in anti-biofilm surfaces. The first part of the programme will cover fundamentals and basic concepts of the subject preparing the learners for the second advanced and practice based stage. Based on our initial experience and through some early market research we have identified younger generation, especially A-Level students to be a highly appealing group to engage with this line of science and technology. As such, we believe providing a number of sponsored places in our first workshop can provide a strong ground for public engagement and promote the missions and objectives of the NBIC network to the society. The proposal therefore will be for NBIC to sponsor places for six students to be offered to Liverpool region sixth-form institutions, which they may promote in their schools through an internal call and competition. We believe this award will induce a considerable level of awareness in the regional science education and helps attraction and development of future talents to industry and enterprising.
Impact Summary of the event: ShimyaTech Ltd has the pleasure to announce its second workshop as a part of its training programs was successfully held on Thursday 10 March at Liverpool Science Park. This was the first part (workshop A) of our full training package, Pathways to NonoWorld, in collaboration with Nano Biosols. We had 14 selected and interested local college and A level students together with their tutors attended the workshop. Speakers from ShimyaTech, Nano Biosols, Keele University and Liverpool John Moores University presented various introductory aspects of Nano and general awareness of nanotechnology and its applications in medicine, coatings and antibacterial/antibiofilm surfaces. The group discussion and quizzes made it more interactive as well as lab demonstration. The event proved successful as we received positive feedback from almost all the attendees. Announcement of the event: The workshop was announced to the public at least 3 months prior the event on our website and social media where the award was acknowledged from the date of receiving the letter (13th Feb 2020). Report and videos of the held event are being launched as well. Here are some of the details of our social media announcements: https://shimyatech.com/news-and-links/ https://www.facebook.com/ShimyatechLtd https://twitter.com/shimyatech https://www.linkedin.com/in/shimyatech-ltd Also, In addition to above, the following e-mail was sent to all local secondary schools and colleges to select most enthusiastic students for the workshop: "Dear Mr/Ms ShimyaTech & NanoBiosols, two Liverpool based leading Nanoscience and Nanotechnology firms are proud to offer a unique Training Program as part of their educational services. The package has been carefully designed to offer learners knowledge and professional skills according to their background and as fit their prior experience with the subject. We are pleased to announce limited number of free places to attend our one-day introductory workshop A of "Pathways to Nanoworld". This offer will cover registration fees (£80 each) for selected and enthusiastic students. Nanotech is an enabling technology with applications in many areas and industries and lots of future job opportunities. This workshop makes them aware of this new potential career path and opportunities in the job market with valuable addition to CV/portfolio of studies. Our sponsor, National Biofilm Innovation Centre (NBIC)" is willing to offer these places as a part of their "Public Engagement and Outreach" grants. Therefore, our aim is to select some interested students. I have attached the workshop package leaflet for your attention. This offer is for workshop A. Please let me know if you need any more information. I look forward to hearing from you soon." Selection method: We selected enthusiastic students who seek their future career related to Nanotechnology in various disciplines. Top student applications were selected from local schools and colleges by competition. The students were selected based on the merit by writing a short paragraph (maximum 200 words) to answer the following questions together with CVs: 1. Why Nano? 2. Current and future applications? 3. Why I am interested? Sample Application from a Liverpool City College A-Level Student: "I think nanotechnology is our future. From the average persons everyday use, in businesses, medicine and more. And I would like to be apart of that change. I've always wanted to be able to help others and make peoples day to day life easier and more efficient. The definition of Nano technology, according to google, is the branch of technology that deals with dimensions and tolerances of less than 100 nanometres, especially the manipulation of individual atoms and molecules. To me, this is such an interesting field of science because such small man-made technologies can have such an impact on society. The history of the development, and the funds for development, is interesting too. From investments into physics and chemistry research for the eventual emergence of nanotechnology in only 1950's. Richard Feynman (1959) predicted that microscopic would be able to arrange atoms to create complex materials that could achieve desired functions. It was Feynman prediction that raised attention to nanotechnology. Since then there has been so much progress, from atomically-thin indium-tin oxide sheets(touch screens that could make touch screens flexible, use less energy and cost less) and carbon tubes that you can spray onto flexible plastic sheets that have sensors on them that can detect when the food spoils. In the foreseeable future, there are already so many applications that are in development, such as carbon nanotubes being used in the material to build spaceships to reduce their weight and even make the material over all stronger. There are also so many applications in medicine such as drug delivery of drugs, light, heat to specific cells (such as cancer cells) to reduce the damage to our healthy cells and antibacterial treatments, which uses gold and UV to kill bacteria. This could be used to sterilise hospital equipment quickly and cheaply.
Start Year 2020
 
Description NBIC POC 01POC18001 Facile fabrication of a disruptive titanium technology using a polydopamine capturing platform. (Jason Mansell) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Dental implant failure consequent to peri-implantitis (PI) continues to be a significant oral healthcare problem. In the UK alone the cost incurred to replace affected implants is estimated to be £20m per annum. The overall aim is therefore clear; the facile fabrication of an antibacterial titanium (Ti) technology. We will achieve this by coating the metal surface with a reactive polydopamine thin film for the subsequent capture of teicoplanin (TP) and chlorhexidine (CHX). The rational for selecting TP and CHX is that these antimicrobial agents are approved for clinical use. Importantly they are also known to retain biological function when immobilised. In terms of measuring success we will want to: • Assess antibacterial potency: Ti samples will be inoculated with different periodontal pathogens (Porphyromonas gingivalis, Fusobacterium nucleatum, A. actinomycetemcomitans, Prevotella intermedia, Peptostreptococcus micros & Staphylococcus aureus). The attachment of these bacteria to the surface and its potential to kill these types of bacteria will be tested using microbial count recovery as well as a LIVE/DEAD staining procedure. This will be visualised using fluorescent microscopy. • Evaluate coating stability: We will want to ascertain the robustness and durability of the PDA-TP-CHX coating of our Ti specimens. Samples will be left stored under ambient conditions for a minimum of 8 months and an assessment of their antibacterial potency determined quarterly. Therefore this project will run for 12 months and not 6 as suggested (page 1). Our coating will need to withstand the rigors of irrigation and insertion into bone and so these studies will also be conducted during the course of the project. • Determine host cell biocompatibility: Having identified the optimal coating steps to take in developing our antibacterial surface, control and functionalised specimens will be seeded with human osteoblasts and an assessment of their growth and maturation determined using reliable and robust biochemical assays.
Collaborator Contribution Full collaborator on this POC project.
Impact We are cautiously optimistic that we have found a facile way of modifying Ti with an antibiotic that is particularly effective in killing S. aureus/MRSA, a major miscreant of implant infections. The PI has a PhD student, Savannah Britton, who is continuing with this research. Savannah has made a valuable contribution to this study. The PI continues to collaborate with Prof. Ashley Blom, consultant orthopaedic surgeon and data analysis licensee for the National Joint Registry. Prof. Blom has strong connections with Ti implant manufacturers and we will want to work with him in forging new industrial links.
Start Year 2018
 
Description NBIC POC 01POC18001 Facile fabrication of a disruptive titanium technology using a polydopamine capturing platform. (Jason Mansell) 
Organisation OsteoCare Implant System Ltd
Country United Kingdom 
Sector Private 
PI Contribution Dental implant failure consequent to peri-implantitis (PI) continues to be a significant oral healthcare problem. In the UK alone the cost incurred to replace affected implants is estimated to be £20m per annum. The overall aim is therefore clear; the facile fabrication of an antibacterial titanium (Ti) technology. We will achieve this by coating the metal surface with a reactive polydopamine thin film for the subsequent capture of teicoplanin (TP) and chlorhexidine (CHX). The rational for selecting TP and CHX is that these antimicrobial agents are approved for clinical use. Importantly they are also known to retain biological function when immobilised. In terms of measuring success we will want to: • Assess antibacterial potency: Ti samples will be inoculated with different periodontal pathogens (Porphyromonas gingivalis, Fusobacterium nucleatum, A. actinomycetemcomitans, Prevotella intermedia, Peptostreptococcus micros & Staphylococcus aureus). The attachment of these bacteria to the surface and its potential to kill these types of bacteria will be tested using microbial count recovery as well as a LIVE/DEAD staining procedure. This will be visualised using fluorescent microscopy. • Evaluate coating stability: We will want to ascertain the robustness and durability of the PDA-TP-CHX coating of our Ti specimens. Samples will be left stored under ambient conditions for a minimum of 8 months and an assessment of their antibacterial potency determined quarterly. Therefore this project will run for 12 months and not 6 as suggested (page 1). Our coating will need to withstand the rigors of irrigation and insertion into bone and so these studies will also be conducted during the course of the project. • Determine host cell biocompatibility: Having identified the optimal coating steps to take in developing our antibacterial surface, control and functionalised specimens will be seeded with human osteoblasts and an assessment of their growth and maturation determined using reliable and robust biochemical assays.
Collaborator Contribution Full collaborator on this POC project.
Impact We are cautiously optimistic that we have found a facile way of modifying Ti with an antibiotic that is particularly effective in killing S. aureus/MRSA, a major miscreant of implant infections. The PI has a PhD student, Savannah Britton, who is continuing with this research. Savannah has made a valuable contribution to this study. The PI continues to collaborate with Prof. Ashley Blom, consultant orthopaedic surgeon and data analysis licensee for the National Joint Registry. Prof. Blom has strong connections with Ti implant manufacturers and we will want to work with him in forging new industrial links.
Start Year 2018
 
Description NBIC POC 01POC18001 Facile fabrication of a disruptive titanium technology using a polydopamine capturing platform. (Jason Mansell) 
Organisation University of the West of England
Country United Kingdom 
Sector Academic/University 
PI Contribution Dental implant failure consequent to peri-implantitis (PI) continues to be a significant oral healthcare problem. In the UK alone the cost incurred to replace affected implants is estimated to be £20m per annum. The overall aim is therefore clear; the facile fabrication of an antibacterial titanium (Ti) technology. We will achieve this by coating the metal surface with a reactive polydopamine thin film for the subsequent capture of teicoplanin (TP) and chlorhexidine (CHX). The rational for selecting TP and CHX is that these antimicrobial agents are approved for clinical use. Importantly they are also known to retain biological function when immobilised. In terms of measuring success we will want to: • Assess antibacterial potency: Ti samples will be inoculated with different periodontal pathogens (Porphyromonas gingivalis, Fusobacterium nucleatum, A. actinomycetemcomitans, Prevotella intermedia, Peptostreptococcus micros & Staphylococcus aureus). The attachment of these bacteria to the surface and its potential to kill these types of bacteria will be tested using microbial count recovery as well as a LIVE/DEAD staining procedure. This will be visualised using fluorescent microscopy. • Evaluate coating stability: We will want to ascertain the robustness and durability of the PDA-TP-CHX coating of our Ti specimens. Samples will be left stored under ambient conditions for a minimum of 8 months and an assessment of their antibacterial potency determined quarterly. Therefore this project will run for 12 months and not 6 as suggested (page 1). Our coating will need to withstand the rigors of irrigation and insertion into bone and so these studies will also be conducted during the course of the project. • Determine host cell biocompatibility: Having identified the optimal coating steps to take in developing our antibacterial surface, control and functionalised specimens will be seeded with human osteoblasts and an assessment of their growth and maturation determined using reliable and robust biochemical assays.
Collaborator Contribution Full collaborator on this POC project.
Impact We are cautiously optimistic that we have found a facile way of modifying Ti with an antibiotic that is particularly effective in killing S. aureus/MRSA, a major miscreant of implant infections. The PI has a PhD student, Savannah Britton, who is continuing with this research. Savannah has made a valuable contribution to this study. The PI continues to collaborate with Prof. Ashley Blom, consultant orthopaedic surgeon and data analysis licensee for the National Joint Registry. Prof. Blom has strong connections with Ti implant manufacturers and we will want to work with him in forging new industrial links.
Start Year 2018
 
Description NBIC POC 01POC18005 Accelerating Antisense PMOs to the Clinic. (Michael Stocks) 
Organisation Belfry Therapeutics
Country United Kingdom 
Sector Private 
PI Contribution Background Pseudomonas aeruginosa (PA) is a highly virulent and multi-drug resistant pathogen causing significant mortality in hospitalised patients. Antisense phosphorodiamidate morpholino oligomers (PMOs) have recently been shown to inhibit the expression of accP and rpsJ essential genes in PA biofilms, with a significant negative impact on biofilm formation increasing the effectiveness of antibiotics against them [Howard (2017) Antimicrob. Agents Chemother e01938-16]. However, the effect occurs at high reported concentrations (µM-range) likely due to poor bacterial uptake. In addition the permeabilising peptides used to uptake such PMOs can show significant toxic effects [McClorey and Banerjee, 2018]. Overall Objective To select and synthesise 2 antisense, non-toxic PMOs with enhanced bacterial uptake targeting accP and RpsJ expression and evaluate their impact on biofilms and changes in sensitivity to antibiotics with a view to the future development of: (i) more effective treatments against PA biofilms through increased delivery of antisense PMOs (ii) an innovative antisense technology which can be used to target any genes in Gram-negative bacterial biofilms. Innovative Approach PMOs will be chemically modified through the synthesis of the PMO-1,6-anhydro-N-acetylmuramoyl-L-alanine conjugates [application of an Antibiotic-Assisted Translocation Platform (AATP) developed by Belfry to drastically increase bacterial antibiotic uptake] to drastically increase PMO uptake through bypassing the PA permeability barrier (including efflux pumps) and transporting them straight into their cytoplasm hence reducing the effective dose.
Collaborator Contribution Full collaborative partner on this POC project.
Impact This was a high risk project which has met all of its project milestones. Monthly project meetings were held between the project partners were results and future plans were agreed. The likely reasons for the lack of biological activity seen are: • The selected PMOs do not possess the required biological activity • The selected PMOs only function with the conjugation to cell permeabilizing peptides • The PMO conjugates, if up taken by active transport are not being metabolised in the cytosol • The PMO conjugates are being cleaved in the supernatant and are therefore unable to be actively up taken into the bacteria. • N-Acetylmuramoyl-L-alanine amidase is not expressed in the PAO1 strain being used To address some of these points, further work is being undertaken at the University of Nottingham to: • Test that the N-Acetylmuramoyl-L-alanine amidase is expressed in the bacterial strain being used in Nottingham. This is being explored through evaluation of ciprofloxacin linked to anhydro-N-acetylmuramoyl-L-alanine supplied by Pedanius Therapeuticsconjugates (known to work in other strains). • Mass spectral analysis of the PMO conjugates evaluating bacterial uptake into the cytosol of the PMO-conjugate. Further work is on-going post project (with full agreement from Pedanius Therapeutics and the University of Nottingham) to evaluate the potential reason for the lack of biological activity observed with the four PMO conjugates (DK17-20). Unfortunately the results proved that this product is unfeasible for continued commercial or research work.
Start Year 2019
 
Description NBIC POC 01POC18005 Accelerating Antisense PMOs to the Clinic. (Michael Stocks) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Background Pseudomonas aeruginosa (PA) is a highly virulent and multi-drug resistant pathogen causing significant mortality in hospitalised patients. Antisense phosphorodiamidate morpholino oligomers (PMOs) have recently been shown to inhibit the expression of accP and rpsJ essential genes in PA biofilms, with a significant negative impact on biofilm formation increasing the effectiveness of antibiotics against them [Howard (2017) Antimicrob. Agents Chemother e01938-16]. However, the effect occurs at high reported concentrations (µM-range) likely due to poor bacterial uptake. In addition the permeabilising peptides used to uptake such PMOs can show significant toxic effects [McClorey and Banerjee, 2018]. Overall Objective To select and synthesise 2 antisense, non-toxic PMOs with enhanced bacterial uptake targeting accP and RpsJ expression and evaluate their impact on biofilms and changes in sensitivity to antibiotics with a view to the future development of: (i) more effective treatments against PA biofilms through increased delivery of antisense PMOs (ii) an innovative antisense technology which can be used to target any genes in Gram-negative bacterial biofilms. Innovative Approach PMOs will be chemically modified through the synthesis of the PMO-1,6-anhydro-N-acetylmuramoyl-L-alanine conjugates [application of an Antibiotic-Assisted Translocation Platform (AATP) developed by Belfry to drastically increase bacterial antibiotic uptake] to drastically increase PMO uptake through bypassing the PA permeability barrier (including efflux pumps) and transporting them straight into their cytoplasm hence reducing the effective dose.
Collaborator Contribution Full collaborative partner on this POC project.
Impact This was a high risk project which has met all of its project milestones. Monthly project meetings were held between the project partners were results and future plans were agreed. The likely reasons for the lack of biological activity seen are: • The selected PMOs do not possess the required biological activity • The selected PMOs only function with the conjugation to cell permeabilizing peptides • The PMO conjugates, if up taken by active transport are not being metabolised in the cytosol • The PMO conjugates are being cleaved in the supernatant and are therefore unable to be actively up taken into the bacteria. • N-Acetylmuramoyl-L-alanine amidase is not expressed in the PAO1 strain being used To address some of these points, further work is being undertaken at the University of Nottingham to: • Test that the N-Acetylmuramoyl-L-alanine amidase is expressed in the bacterial strain being used in Nottingham. This is being explored through evaluation of ciprofloxacin linked to anhydro-N-acetylmuramoyl-L-alanine supplied by Pedanius Therapeuticsconjugates (known to work in other strains). • Mass spectral analysis of the PMO conjugates evaluating bacterial uptake into the cytosol of the PMO-conjugate. Further work is on-going post project (with full agreement from Pedanius Therapeutics and the University of Nottingham) to evaluate the potential reason for the lack of biological activity observed with the four PMO conjugates (DK17-20). Unfortunately the results proved that this product is unfeasible for continued commercial or research work.
Start Year 2019
 
Description NBIC POC 01POC18005 Accelerating Antisense PMOs to the Clinic. (Michael Stocks) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Background Pseudomonas aeruginosa (PA) is a highly virulent and multi-drug resistant pathogen causing significant mortality in hospitalised patients. Antisense phosphorodiamidate morpholino oligomers (PMOs) have recently been shown to inhibit the expression of accP and rpsJ essential genes in PA biofilms, with a significant negative impact on biofilm formation increasing the effectiveness of antibiotics against them [Howard (2017) Antimicrob. Agents Chemother e01938-16]. However, the effect occurs at high reported concentrations (µM-range) likely due to poor bacterial uptake. In addition the permeabilising peptides used to uptake such PMOs can show significant toxic effects [McClorey and Banerjee, 2018]. Overall Objective To select and synthesise 2 antisense, non-toxic PMOs with enhanced bacterial uptake targeting accP and RpsJ expression and evaluate their impact on biofilms and changes in sensitivity to antibiotics with a view to the future development of: (i) more effective treatments against PA biofilms through increased delivery of antisense PMOs (ii) an innovative antisense technology which can be used to target any genes in Gram-negative bacterial biofilms. Innovative Approach PMOs will be chemically modified through the synthesis of the PMO-1,6-anhydro-N-acetylmuramoyl-L-alanine conjugates [application of an Antibiotic-Assisted Translocation Platform (AATP) developed by Belfry to drastically increase bacterial antibiotic uptake] to drastically increase PMO uptake through bypassing the PA permeability barrier (including efflux pumps) and transporting them straight into their cytoplasm hence reducing the effective dose.
Collaborator Contribution Full collaborative partner on this POC project.
Impact This was a high risk project which has met all of its project milestones. Monthly project meetings were held between the project partners were results and future plans were agreed. The likely reasons for the lack of biological activity seen are: • The selected PMOs do not possess the required biological activity • The selected PMOs only function with the conjugation to cell permeabilizing peptides • The PMO conjugates, if up taken by active transport are not being metabolised in the cytosol • The PMO conjugates are being cleaved in the supernatant and are therefore unable to be actively up taken into the bacteria. • N-Acetylmuramoyl-L-alanine amidase is not expressed in the PAO1 strain being used To address some of these points, further work is being undertaken at the University of Nottingham to: • Test that the N-Acetylmuramoyl-L-alanine amidase is expressed in the bacterial strain being used in Nottingham. This is being explored through evaluation of ciprofloxacin linked to anhydro-N-acetylmuramoyl-L-alanine supplied by Pedanius Therapeuticsconjugates (known to work in other strains). • Mass spectral analysis of the PMO conjugates evaluating bacterial uptake into the cytosol of the PMO-conjugate. Further work is on-going post project (with full agreement from Pedanius Therapeutics and the University of Nottingham) to evaluate the potential reason for the lack of biological activity observed with the four PMO conjugates (DK17-20). Unfortunately the results proved that this product is unfeasible for continued commercial or research work.
Start Year 2019
 
Description NBIC POC 01POC18007 Biofilm evolution in microbial fuel cells fed Yeo Valley wastewater. (Jonathan Winfield) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Wastewater treatment is intrinsically linked to quality of life. While companies are meeting efficiency targets they are under increasing pressure to do so using less energy intensive methods. This applies to large wastewater treatment companies processing domestic wastewater but also to manufacturers and industry who treat their own wastewater. One example is Yeo Valley Farms who manufacture dairy foods and generate about 1.6 million pots of yogurt a day. They operate their own onsite treatment plants and are looking for alternative sustainable technologies to lower operational costs. At their Somerset site in Blagdon, technologies such as solar panels have been installed but other technologies like wind turbines cannot be used because the plant sits in a protected area of natural beauty. Microbial fuel cells (MFC) generate electricity as a direct result of the treatment of wastewater using 'electro-active' microorganisms. The source of energy is the organic pollutants in the liquid which bacteria tap in to, freeing up the electrons resulting in electricity production. This project will focus on the bio-electrochemical capabilities of organisms found in Yeo Valley's treatment plant and will monitor the composition of electro-active biofilms from different stages of the treatment process. The overall aim of the project is to understand the evolution of the biofilm in MFCs that have been inoculated and fed diary wastewater from four different stages of treatment. This will shed light on the capability of organisms not only to treat but produce power. In the later stages of experimentation, the focus will be on cascades of MFCs, where wastewater flows sequentially through a number of units one after the other. Cascades not only improve treatment and power efficiency but the biofilm can be primed for particular conditions such as temperature and varying wastewater composition, factors that are proving a challenge to Yeo Valley.
Collaborator Contribution Full collaborative partners in this POC project.
Impact • MFCs were able to produce electricity when fed Yeo Valley wastewater from different stages of their treatment. • Bacteria from Yeo Valley do have 'electro-active' capabilities in microbial fuel cells. • MFCs might perform more efficiently earlier on in the Yeo Valley treatment process. • Yeo Valley wastewater taken from the end of the treatment process is not suitable as an inoculant or fuel. • Microbes present in dairy wastewater may be better at power generation when fed dairy wastewater than 'electro-active' communities from established 'non-diary' MFCs. A journal article is in preparation. It is unlikely that the collaboration with BioLoop will continue and they were the only link to Yeo Valley. However, we have strong links with Wessex Water and are confident that our findings can benefit other wastewater treatment companies.
Start Year 2019
 
Description NBIC POC 01POC18007 Biofilm evolution in microbial fuel cells fed Yeo Valley wastewater. (Jonathan Winfield) 
Organisation University of the West of England
Country United Kingdom 
Sector Academic/University 
PI Contribution Wastewater treatment is intrinsically linked to quality of life. While companies are meeting efficiency targets they are under increasing pressure to do so using less energy intensive methods. This applies to large wastewater treatment companies processing domestic wastewater but also to manufacturers and industry who treat their own wastewater. One example is Yeo Valley Farms who manufacture dairy foods and generate about 1.6 million pots of yogurt a day. They operate their own onsite treatment plants and are looking for alternative sustainable technologies to lower operational costs. At their Somerset site in Blagdon, technologies such as solar panels have been installed but other technologies like wind turbines cannot be used because the plant sits in a protected area of natural beauty. Microbial fuel cells (MFC) generate electricity as a direct result of the treatment of wastewater using 'electro-active' microorganisms. The source of energy is the organic pollutants in the liquid which bacteria tap in to, freeing up the electrons resulting in electricity production. This project will focus on the bio-electrochemical capabilities of organisms found in Yeo Valley's treatment plant and will monitor the composition of electro-active biofilms from different stages of the treatment process. The overall aim of the project is to understand the evolution of the biofilm in MFCs that have been inoculated and fed diary wastewater from four different stages of treatment. This will shed light on the capability of organisms not only to treat but produce power. In the later stages of experimentation, the focus will be on cascades of MFCs, where wastewater flows sequentially through a number of units one after the other. Cascades not only improve treatment and power efficiency but the biofilm can be primed for particular conditions such as temperature and varying wastewater composition, factors that are proving a challenge to Yeo Valley.
Collaborator Contribution Full collaborative partners in this POC project.
Impact • MFCs were able to produce electricity when fed Yeo Valley wastewater from different stages of their treatment. • Bacteria from Yeo Valley do have 'electro-active' capabilities in microbial fuel cells. • MFCs might perform more efficiently earlier on in the Yeo Valley treatment process. • Yeo Valley wastewater taken from the end of the treatment process is not suitable as an inoculant or fuel. • Microbes present in dairy wastewater may be better at power generation when fed dairy wastewater than 'electro-active' communities from established 'non-diary' MFCs. A journal article is in preparation. It is unlikely that the collaboration with BioLoop will continue and they were the only link to Yeo Valley. However, we have strong links with Wessex Water and are confident that our findings can benefit other wastewater treatment companies.
Start Year 2019
 
Description NBIC POC 01POC18007 Biofilm evolution in microbial fuel cells fed Yeo Valley wastewater. (Jonathan Winfield) 
Organisation Yeo Marketing Limited
Country United Kingdom 
Sector Private 
PI Contribution Wastewater treatment is intrinsically linked to quality of life. While companies are meeting efficiency targets they are under increasing pressure to do so using less energy intensive methods. This applies to large wastewater treatment companies processing domestic wastewater but also to manufacturers and industry who treat their own wastewater. One example is Yeo Valley Farms who manufacture dairy foods and generate about 1.6 million pots of yogurt a day. They operate their own onsite treatment plants and are looking for alternative sustainable technologies to lower operational costs. At their Somerset site in Blagdon, technologies such as solar panels have been installed but other technologies like wind turbines cannot be used because the plant sits in a protected area of natural beauty. Microbial fuel cells (MFC) generate electricity as a direct result of the treatment of wastewater using 'electro-active' microorganisms. The source of energy is the organic pollutants in the liquid which bacteria tap in to, freeing up the electrons resulting in electricity production. This project will focus on the bio-electrochemical capabilities of organisms found in Yeo Valley's treatment plant and will monitor the composition of electro-active biofilms from different stages of the treatment process. The overall aim of the project is to understand the evolution of the biofilm in MFCs that have been inoculated and fed diary wastewater from four different stages of treatment. This will shed light on the capability of organisms not only to treat but produce power. In the later stages of experimentation, the focus will be on cascades of MFCs, where wastewater flows sequentially through a number of units one after the other. Cascades not only improve treatment and power efficiency but the biofilm can be primed for particular conditions such as temperature and varying wastewater composition, factors that are proving a challenge to Yeo Valley.
Collaborator Contribution Full collaborative partners in this POC project.
Impact • MFCs were able to produce electricity when fed Yeo Valley wastewater from different stages of their treatment. • Bacteria from Yeo Valley do have 'electro-active' capabilities in microbial fuel cells. • MFCs might perform more efficiently earlier on in the Yeo Valley treatment process. • Yeo Valley wastewater taken from the end of the treatment process is not suitable as an inoculant or fuel. • Microbes present in dairy wastewater may be better at power generation when fed dairy wastewater than 'electro-active' communities from established 'non-diary' MFCs. A journal article is in preparation. It is unlikely that the collaboration with BioLoop will continue and they were the only link to Yeo Valley. However, we have strong links with Wessex Water and are confident that our findings can benefit other wastewater treatment companies.
Start Year 2019
 
Description NBIC POC 01POC18010 Measuring biofilm formation in venous catheters. (Susana Direito) 
Organisation Kimal
Country Germany 
Sector Private 
PI Contribution We aim to improve the design of venous catheters so as to reduce the risk of catheter-associated bloodstream infections. We will use a drip-flow biofilm reactor to measure biofilm formation on catheters with a range of lumen cross-sections, skive shapes and surface coatings. Success of our project will be defined by: • Measurements of biofilm accumulation rates in a range of catheters of different designs. • Measurements of the spatial arrangement of biofilm in the catheters. • Improved understanding of how catheter design can promote or prevent biofilm growth. We have also submitted a related proposal to develop a computer modelling framework for biofilm growth in catheters. While the two projects could be performed independently, they would be highly complementary if performed in parallel. We will measure biofilm growth on a range of catheters provided by Kimal, under realistic flow conditions. The work will be performed by Susana Direito, under the supervision of Rosalind Allen, with monthly teleconferences as well as in-person meetings with Kimal in months 3 and 6.
Collaborator Contribution KIMAL was an ideal partner for this project since its VASTEC R&D team has a dedicated on-site innovation centres with machining tools that can be used to create innovative catheter designs for testing. KIMAL also has a new manufacturing plant in Egypt which allows swift translation of improved designs into large-scale manufactured products. However, KIMAL does not have facilities for testing bacterial growth under fluid flow, as we have at the University of Edinburgh. KIMAL made in-kind contributions totalling £10,000. These consisted of: • Staff time for 4 x monthly teleconferences and 2 x in-person meetings, plus consultation via email and phone during the project: £7,500. • Supply of catheters, and production of prototype catheters where needed e.g. with different skive shape and size: £2,500.
Impact This project achieved all the original goals which were set out in the proof of concept proposal. The results of this project show that skive shape and size, lumen shape and surface coating do affect biofilm formation. Bacteria seem to attach to grooves both in the exterior and interior walls of the catheters. Removing these grooves may help to reduce bacterial attachment/biofilm formation. KIMAL has already improved the manufacturing process to remove internal grooves, as observed in the CT scans of the HP and PRO samples. Our study highlighted the importance of biofilm formation close to the skives. The way skives are cut also seems to be important, since macroscopic surface roughness may play a role in bacterial attachment. As discussed with KIMAL, polishing may be a good solution to eliminate material imperfections. We also found that silver-coated catheters do not seem to be the best option for biofilm prevention. Regarding contact-kill surfaces, our results were interesting, suggesting the efficacy may be condition-dependent. The project was highly successful, and it identified immediate manufacturing steps that could be taken to improve catheter design and reduce biofilm formation. To support future work with Kimal PLC, a PhD studentship was established through the Engineering and Physical Sciences Research Council (EPSRC) Soft Matter and Functional Interfaces (SOFI) CDT programme which works to provide industrially integrated post-graduate training in research, enterprise and innovation for future industry leaders. Further funding applications are also in the pipeline.
Start Year 2019
 
Description NBIC POC 01POC18010 Measuring biofilm formation in venous catheters. (Susana Direito) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution We aim to improve the design of venous catheters so as to reduce the risk of catheter-associated bloodstream infections. We will use a drip-flow biofilm reactor to measure biofilm formation on catheters with a range of lumen cross-sections, skive shapes and surface coatings. Success of our project will be defined by: • Measurements of biofilm accumulation rates in a range of catheters of different designs. • Measurements of the spatial arrangement of biofilm in the catheters. • Improved understanding of how catheter design can promote or prevent biofilm growth. We have also submitted a related proposal to develop a computer modelling framework for biofilm growth in catheters. While the two projects could be performed independently, they would be highly complementary if performed in parallel. We will measure biofilm growth on a range of catheters provided by Kimal, under realistic flow conditions. The work will be performed by Susana Direito, under the supervision of Rosalind Allen, with monthly teleconferences as well as in-person meetings with Kimal in months 3 and 6.
Collaborator Contribution KIMAL was an ideal partner for this project since its VASTEC R&D team has a dedicated on-site innovation centres with machining tools that can be used to create innovative catheter designs for testing. KIMAL also has a new manufacturing plant in Egypt which allows swift translation of improved designs into large-scale manufactured products. However, KIMAL does not have facilities for testing bacterial growth under fluid flow, as we have at the University of Edinburgh. KIMAL made in-kind contributions totalling £10,000. These consisted of: • Staff time for 4 x monthly teleconferences and 2 x in-person meetings, plus consultation via email and phone during the project: £7,500. • Supply of catheters, and production of prototype catheters where needed e.g. with different skive shape and size: £2,500.
Impact This project achieved all the original goals which were set out in the proof of concept proposal. The results of this project show that skive shape and size, lumen shape and surface coating do affect biofilm formation. Bacteria seem to attach to grooves both in the exterior and interior walls of the catheters. Removing these grooves may help to reduce bacterial attachment/biofilm formation. KIMAL has already improved the manufacturing process to remove internal grooves, as observed in the CT scans of the HP and PRO samples. Our study highlighted the importance of biofilm formation close to the skives. The way skives are cut also seems to be important, since macroscopic surface roughness may play a role in bacterial attachment. As discussed with KIMAL, polishing may be a good solution to eliminate material imperfections. We also found that silver-coated catheters do not seem to be the best option for biofilm prevention. Regarding contact-kill surfaces, our results were interesting, suggesting the efficacy may be condition-dependent. The project was highly successful, and it identified immediate manufacturing steps that could be taken to improve catheter design and reduce biofilm formation. To support future work with Kimal PLC, a PhD studentship was established through the Engineering and Physical Sciences Research Council (EPSRC) Soft Matter and Functional Interfaces (SOFI) CDT programme which works to provide industrially integrated post-graduate training in research, enterprise and innovation for future industry leaders. Further funding applications are also in the pipeline.
Start Year 2019
 
Description NBIC POC 01POC18010 Measuring biofilm formation in venous catheters. (Susana Direito) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution We aim to improve the design of venous catheters so as to reduce the risk of catheter-associated bloodstream infections. We will use a drip-flow biofilm reactor to measure biofilm formation on catheters with a range of lumen cross-sections, skive shapes and surface coatings. Success of our project will be defined by: • Measurements of biofilm accumulation rates in a range of catheters of different designs. • Measurements of the spatial arrangement of biofilm in the catheters. • Improved understanding of how catheter design can promote or prevent biofilm growth. We have also submitted a related proposal to develop a computer modelling framework for biofilm growth in catheters. While the two projects could be performed independently, they would be highly complementary if performed in parallel. We will measure biofilm growth on a range of catheters provided by Kimal, under realistic flow conditions. The work will be performed by Susana Direito, under the supervision of Rosalind Allen, with monthly teleconferences as well as in-person meetings with Kimal in months 3 and 6.
Collaborator Contribution KIMAL was an ideal partner for this project since its VASTEC R&D team has a dedicated on-site innovation centres with machining tools that can be used to create innovative catheter designs for testing. KIMAL also has a new manufacturing plant in Egypt which allows swift translation of improved designs into large-scale manufactured products. However, KIMAL does not have facilities for testing bacterial growth under fluid flow, as we have at the University of Edinburgh. KIMAL made in-kind contributions totalling £10,000. These consisted of: • Staff time for 4 x monthly teleconferences and 2 x in-person meetings, plus consultation via email and phone during the project: £7,500. • Supply of catheters, and production of prototype catheters where needed e.g. with different skive shape and size: £2,500.
Impact This project achieved all the original goals which were set out in the proof of concept proposal. The results of this project show that skive shape and size, lumen shape and surface coating do affect biofilm formation. Bacteria seem to attach to grooves both in the exterior and interior walls of the catheters. Removing these grooves may help to reduce bacterial attachment/biofilm formation. KIMAL has already improved the manufacturing process to remove internal grooves, as observed in the CT scans of the HP and PRO samples. Our study highlighted the importance of biofilm formation close to the skives. The way skives are cut also seems to be important, since macroscopic surface roughness may play a role in bacterial attachment. As discussed with KIMAL, polishing may be a good solution to eliminate material imperfections. We also found that silver-coated catheters do not seem to be the best option for biofilm prevention. Regarding contact-kill surfaces, our results were interesting, suggesting the efficacy may be condition-dependent. The project was highly successful, and it identified immediate manufacturing steps that could be taken to improve catheter design and reduce biofilm formation. To support future work with Kimal PLC, a PhD studentship was established through the Engineering and Physical Sciences Research Council (EPSRC) Soft Matter and Functional Interfaces (SOFI) CDT programme which works to provide industrially integrated post-graduate training in research, enterprise and innovation for future industry leaders. Further funding applications are also in the pipeline.
Start Year 2019
 
Description NBIC POC 01POC18011 BIOfilm FluorescentANtibioTicsAsSaY (Freya Harrison) 
Organisation Imperial College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Aim: To develop a tool to help manage chronic biofilm infections by detecting the level of antibiotic penetration through a biofilm in a pre-clinical model. The study aims to quantify the penetration of fluorescently-labelled antibiotics within a bacterial biofilm. Success will result from meaningful reproducible data, gathered using a UKASaccredited method and a novel clinically relevant method. Currently available mass-spectrometry based methods are unsuitable for high-throughput assays to detect drugs that have penetrated biofilm: they are specialised and expensive. An assay based on fluorescently-labelled candidate antibiofilm agents would be achievable with a microplate fluorimeter and offer a more affordable alternative. The ultimate aim of the study (following on from this small-scale project) will be to develop a technique suitable for use within clinical microbiology laboratories that can be used to label and then detect potential antibiotics within biofilms formed by clinical pathogens. Ultimately a device would be the preferred outcome but the level of complexity required in this study will inform the team on the feasibility of a device versus a methodology. The aim is to inform clinicians on effective antibiotic candidates prior to treatment. This will not only improve the efficacy of treatments but will also decrease the risk of selecting for antibiotic resistant bacterial phenotypes. In order to assess antibiotic penetration, we will use and compare 2 methodologies. A high-throughput, clinically relevant model specific to biofilm infection in cystic fibrosis (CF) (Infect. Immun. 82:3312; Microbiology 162:1755) and a UK accreditation service (UKAS) accredited biofilm methodology. Fluorescently labelled antibiotics will be applied to these biofilms and the quantity of bacteria that has penetrated the biofilm will be quantified. Output: assess potential of BODIPY conjugates for use within a high-throughput R&D assay for testing novel antibacterial agents, and/or adjuvants proposed to break down biofilm matrix.
Collaborator Contribution Full collaborative partner in this POC project.
Impact The Ex-vivo Lung Tissue Model was successfully accredited to ISO 17025 in September 2020. The latest Extension to Scope sees a remarkable achievement to accredit this model. Ordinarily ISO 17025 is applied to current standard methods, typically carried out in suspension or on abiotic surfaces. Accrediting reproducible and reliable tissue based models is pivotal in creating models that represent complex 'real world' conditions and therefore in developing safe and effective treatments and therapies. The results from Task 2 were published in the journal Microbiology (in press, DOI: 10.1099/mic.0.000995). Due to administrative delays at UoW, this work ended up being funded by FH's MRC grant as discussed previously with NBIC.
Start Year 2019
 
Description NBIC POC 01POC18011 BIOfilm FluorescentANtibioTicsAsSaY (Freya Harrison) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Aim: To develop a tool to help manage chronic biofilm infections by detecting the level of antibiotic penetration through a biofilm in a pre-clinical model. The study aims to quantify the penetration of fluorescently-labelled antibiotics within a bacterial biofilm. Success will result from meaningful reproducible data, gathered using a UKASaccredited method and a novel clinically relevant method. Currently available mass-spectrometry based methods are unsuitable for high-throughput assays to detect drugs that have penetrated biofilm: they are specialised and expensive. An assay based on fluorescently-labelled candidate antibiofilm agents would be achievable with a microplate fluorimeter and offer a more affordable alternative. The ultimate aim of the study (following on from this small-scale project) will be to develop a technique suitable for use within clinical microbiology laboratories that can be used to label and then detect potential antibiotics within biofilms formed by clinical pathogens. Ultimately a device would be the preferred outcome but the level of complexity required in this study will inform the team on the feasibility of a device versus a methodology. The aim is to inform clinicians on effective antibiotic candidates prior to treatment. This will not only improve the efficacy of treatments but will also decrease the risk of selecting for antibiotic resistant bacterial phenotypes. In order to assess antibiotic penetration, we will use and compare 2 methodologies. A high-throughput, clinically relevant model specific to biofilm infection in cystic fibrosis (CF) (Infect. Immun. 82:3312; Microbiology 162:1755) and a UK accreditation service (UKAS) accredited biofilm methodology. Fluorescently labelled antibiotics will be applied to these biofilms and the quantity of bacteria that has penetrated the biofilm will be quantified. Output: assess potential of BODIPY conjugates for use within a high-throughput R&D assay for testing novel antibacterial agents, and/or adjuvants proposed to break down biofilm matrix.
Collaborator Contribution Full collaborative partner in this POC project.
Impact The Ex-vivo Lung Tissue Model was successfully accredited to ISO 17025 in September 2020. The latest Extension to Scope sees a remarkable achievement to accredit this model. Ordinarily ISO 17025 is applied to current standard methods, typically carried out in suspension or on abiotic surfaces. Accrediting reproducible and reliable tissue based models is pivotal in creating models that represent complex 'real world' conditions and therefore in developing safe and effective treatments and therapies. The results from Task 2 were published in the journal Microbiology (in press, DOI: 10.1099/mic.0.000995). Due to administrative delays at UoW, this work ended up being funded by FH's MRC grant as discussed previously with NBIC.
Start Year 2019
 
Description NBIC POC 01POC18011 BIOfilm FluorescentANtibioTicsAsSaY (Freya Harrison) 
Organisation Perfectus Biomed Ltd.
Country United Kingdom 
Sector Private 
PI Contribution Aim: To develop a tool to help manage chronic biofilm infections by detecting the level of antibiotic penetration through a biofilm in a pre-clinical model. The study aims to quantify the penetration of fluorescently-labelled antibiotics within a bacterial biofilm. Success will result from meaningful reproducible data, gathered using a UKASaccredited method and a novel clinically relevant method. Currently available mass-spectrometry based methods are unsuitable for high-throughput assays to detect drugs that have penetrated biofilm: they are specialised and expensive. An assay based on fluorescently-labelled candidate antibiofilm agents would be achievable with a microplate fluorimeter and offer a more affordable alternative. The ultimate aim of the study (following on from this small-scale project) will be to develop a technique suitable for use within clinical microbiology laboratories that can be used to label and then detect potential antibiotics within biofilms formed by clinical pathogens. Ultimately a device would be the preferred outcome but the level of complexity required in this study will inform the team on the feasibility of a device versus a methodology. The aim is to inform clinicians on effective antibiotic candidates prior to treatment. This will not only improve the efficacy of treatments but will also decrease the risk of selecting for antibiotic resistant bacterial phenotypes. In order to assess antibiotic penetration, we will use and compare 2 methodologies. A high-throughput, clinically relevant model specific to biofilm infection in cystic fibrosis (CF) (Infect. Immun. 82:3312; Microbiology 162:1755) and a UK accreditation service (UKAS) accredited biofilm methodology. Fluorescently labelled antibiotics will be applied to these biofilms and the quantity of bacteria that has penetrated the biofilm will be quantified. Output: assess potential of BODIPY conjugates for use within a high-throughput R&D assay for testing novel antibacterial agents, and/or adjuvants proposed to break down biofilm matrix.
Collaborator Contribution Full collaborative partner in this POC project.
Impact The Ex-vivo Lung Tissue Model was successfully accredited to ISO 17025 in September 2020. The latest Extension to Scope sees a remarkable achievement to accredit this model. Ordinarily ISO 17025 is applied to current standard methods, typically carried out in suspension or on abiotic surfaces. Accrediting reproducible and reliable tissue based models is pivotal in creating models that represent complex 'real world' conditions and therefore in developing safe and effective treatments and therapies. The results from Task 2 were published in the journal Microbiology (in press, DOI: 10.1099/mic.0.000995). Due to administrative delays at UoW, this work ended up being funded by FH's MRC grant as discussed previously with NBIC.
Start Year 2019
 
Description NBIC POC 01POC18011 BIOfilm FluorescentANtibioTicsAsSaY (Freya Harrison) 
Organisation University of Warwick
Country United Kingdom 
Sector Academic/University 
PI Contribution Aim: To develop a tool to help manage chronic biofilm infections by detecting the level of antibiotic penetration through a biofilm in a pre-clinical model. The study aims to quantify the penetration of fluorescently-labelled antibiotics within a bacterial biofilm. Success will result from meaningful reproducible data, gathered using a UKASaccredited method and a novel clinically relevant method. Currently available mass-spectrometry based methods are unsuitable for high-throughput assays to detect drugs that have penetrated biofilm: they are specialised and expensive. An assay based on fluorescently-labelled candidate antibiofilm agents would be achievable with a microplate fluorimeter and offer a more affordable alternative. The ultimate aim of the study (following on from this small-scale project) will be to develop a technique suitable for use within clinical microbiology laboratories that can be used to label and then detect potential antibiotics within biofilms formed by clinical pathogens. Ultimately a device would be the preferred outcome but the level of complexity required in this study will inform the team on the feasibility of a device versus a methodology. The aim is to inform clinicians on effective antibiotic candidates prior to treatment. This will not only improve the efficacy of treatments but will also decrease the risk of selecting for antibiotic resistant bacterial phenotypes. In order to assess antibiotic penetration, we will use and compare 2 methodologies. A high-throughput, clinically relevant model specific to biofilm infection in cystic fibrosis (CF) (Infect. Immun. 82:3312; Microbiology 162:1755) and a UK accreditation service (UKAS) accredited biofilm methodology. Fluorescently labelled antibiotics will be applied to these biofilms and the quantity of bacteria that has penetrated the biofilm will be quantified. Output: assess potential of BODIPY conjugates for use within a high-throughput R&D assay for testing novel antibacterial agents, and/or adjuvants proposed to break down biofilm matrix.
Collaborator Contribution Full collaborative partner in this POC project.
Impact The Ex-vivo Lung Tissue Model was successfully accredited to ISO 17025 in September 2020. The latest Extension to Scope sees a remarkable achievement to accredit this model. Ordinarily ISO 17025 is applied to current standard methods, typically carried out in suspension or on abiotic surfaces. Accrediting reproducible and reliable tissue based models is pivotal in creating models that represent complex 'real world' conditions and therefore in developing safe and effective treatments and therapies. The results from Task 2 were published in the journal Microbiology (in press, DOI: 10.1099/mic.0.000995). Due to administrative delays at UoW, this work ended up being funded by FH's MRC grant as discussed previously with NBIC.
Start Year 2019
 
Description NBIC POC 01POC18015 Development of Next Generation Synergistic Antibiofilm Treatments for Wounds (Stephen Russell) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution The aim is to determine the feasibility of producing a new prototype wound dressing incorporating an innovative synergistic antimicrobial and antibiofilm patent pending technology being developed by T-EDTA Ltd, 5DHPG Ltd and Medipure Ltd (currently at TRL 3), and internationally-leading expertise in fibre and fabric manufacturing at the UoL. This will involve integration of a new antibiofilm formulation, with a fibrous wound dressing made of a clinically relevant, low adherent gelating polymer e.g. polysaccharide-based or poly(vinyl alcohol) (PVA). The specific objectives are to: 1. Develop a new antibiofilm formulation that can be effectively integrated with advanced dressing fabrics in a scalable and cost-effective fashion to enable long-lasting antimicrobial function across the fibre surfaces within the dressing; 2. Advance the development of the antibiofilm formulation and understand its efficacy, mode of action and characteristics; 3. Evaluate the enhanced antibiofilm performance when the formulation is combined within and on specific fibrous systems for use in woundcare. This will provide a platform to develop highly effective therapies for the management of biofilms in wounds in future work and the delivery of next generation fast acting antibiofilm synergistic compositions capable of promoting healing in infected wounds. The future work will involve developing infection responsive fibrous polymer building blocks that can be integrated within the wound dressing, to facilitate smart response to markers of infection. The major advance will be the development of wound dressing designs and manufacturing technologies that can be potentially upscaled and used to tackle newly identified clinical conditions currently not catered for.
Collaborator Contribution Full collaborative partners in this POC project.
Impact • Electrospraying, coupled with formulation of spraying solutions with alcohol to reduce surface tension and increase air transit evaporation is a suitable method for deployment of aqueous antibiofilm compositions based on T-EDTA. • The two synergistic compositions T-EDTA/Suprox, and AgCuEDTA exhibited powerful antibiofilm characteristics on both CMC and alginate substrates in two models, whilst moderate activity was found for the drip-flow model. This could be explained by the removal of some of the active material in the flow regime of the drip-flow. Commercial dressings follow similar observations. • Overall, some variability in results was present, possibly suggesting local variability in level applied, and total level. NBIC case study: Annually over 18 million patients globally suffer from chronic wounds, of which over 50% will develop a localised infection due to biofilms, a major impediment to wound healing, and long term health. This can lead to increased health service costs, morbidity and further complications for the patient, which ultimately includes amputation. The indicative annual cost for wound management in Europe accounts for 2-4% of health-care budgets and has been estimated to be as high as €10 billion. Current antimicrobials in woundcare have limited effectiveness against biofilms. The project, 'Development of Next Generation synergistic antibiofilm treatments for wounds' was awarded an NBIC Proof of Concept (POC) award and in-kind contributions from 5DHPG Ltd, enabling process development work and prototype production to be carried out at the University of Leeds, whilst 5DHPG supplied raw materials and carried out antimicrobial and antibiofilm testing. The innovative approach of the project was the development of a synergistic combination of both antimicrobials in combination with 5Ds patent protected antibiofilm agents into one formulation, and its incorporation into modern hydrogel-based low adherent fibrous wound dressing. Two synergistic compositions, including metalised chelating agents applied to both carboxymethylcellulose and alginate substrates exhibited outstanding antibiofilm performance. With further development work, these technologies could be readily commercialised by companies operating in the advanced wound care space. Dr Steve Law, Research and Innovation Manager, 5D Health Protection Group Ltd said, "The novel antibiofilm technologies had been developed to laboratory scale by 5DHPG Ltd, but the NBIC award allowed the exploration of how the technologies could be applied on modern wound care substrates and also enabled evaluation of wound dressing prototypes in robust antibiofilm models". The project has been successfully completed, with all outcomes achieved. Two routes for advancement of the project are being pursued: sharing of the results with targeted industry partner(s) with a view to generate collaboration and co-development projects, and to seek further funding based on further development of synergistic antibiofilm compositions and further development of deployment techniques.
Start Year 2018
 
Description NBIC POC 01POC18015 Development of Next Generation Synergistic Antibiofilm Treatments for Wounds (Stephen Russell) 
Organisation Medipure Ltd
Country United Kingdom 
Sector Private 
PI Contribution The aim is to determine the feasibility of producing a new prototype wound dressing incorporating an innovative synergistic antimicrobial and antibiofilm patent pending technology being developed by T-EDTA Ltd, 5DHPG Ltd and Medipure Ltd (currently at TRL 3), and internationally-leading expertise in fibre and fabric manufacturing at the UoL. This will involve integration of a new antibiofilm formulation, with a fibrous wound dressing made of a clinically relevant, low adherent gelating polymer e.g. polysaccharide-based or poly(vinyl alcohol) (PVA). The specific objectives are to: 1. Develop a new antibiofilm formulation that can be effectively integrated with advanced dressing fabrics in a scalable and cost-effective fashion to enable long-lasting antimicrobial function across the fibre surfaces within the dressing; 2. Advance the development of the antibiofilm formulation and understand its efficacy, mode of action and characteristics; 3. Evaluate the enhanced antibiofilm performance when the formulation is combined within and on specific fibrous systems for use in woundcare. This will provide a platform to develop highly effective therapies for the management of biofilms in wounds in future work and the delivery of next generation fast acting antibiofilm synergistic compositions capable of promoting healing in infected wounds. The future work will involve developing infection responsive fibrous polymer building blocks that can be integrated within the wound dressing, to facilitate smart response to markers of infection. The major advance will be the development of wound dressing designs and manufacturing technologies that can be potentially upscaled and used to tackle newly identified clinical conditions currently not catered for.
Collaborator Contribution Full collaborative partners in this POC project.
Impact • Electrospraying, coupled with formulation of spraying solutions with alcohol to reduce surface tension and increase air transit evaporation is a suitable method for deployment of aqueous antibiofilm compositions based on T-EDTA. • The two synergistic compositions T-EDTA/Suprox, and AgCuEDTA exhibited powerful antibiofilm characteristics on both CMC and alginate substrates in two models, whilst moderate activity was found for the drip-flow model. This could be explained by the removal of some of the active material in the flow regime of the drip-flow. Commercial dressings follow similar observations. • Overall, some variability in results was present, possibly suggesting local variability in level applied, and total level. NBIC case study: Annually over 18 million patients globally suffer from chronic wounds, of which over 50% will develop a localised infection due to biofilms, a major impediment to wound healing, and long term health. This can lead to increased health service costs, morbidity and further complications for the patient, which ultimately includes amputation. The indicative annual cost for wound management in Europe accounts for 2-4% of health-care budgets and has been estimated to be as high as €10 billion. Current antimicrobials in woundcare have limited effectiveness against biofilms. The project, 'Development of Next Generation synergistic antibiofilm treatments for wounds' was awarded an NBIC Proof of Concept (POC) award and in-kind contributions from 5DHPG Ltd, enabling process development work and prototype production to be carried out at the University of Leeds, whilst 5DHPG supplied raw materials and carried out antimicrobial and antibiofilm testing. The innovative approach of the project was the development of a synergistic combination of both antimicrobials in combination with 5Ds patent protected antibiofilm agents into one formulation, and its incorporation into modern hydrogel-based low adherent fibrous wound dressing. Two synergistic compositions, including metalised chelating agents applied to both carboxymethylcellulose and alginate substrates exhibited outstanding antibiofilm performance. With further development work, these technologies could be readily commercialised by companies operating in the advanced wound care space. Dr Steve Law, Research and Innovation Manager, 5D Health Protection Group Ltd said, "The novel antibiofilm technologies had been developed to laboratory scale by 5DHPG Ltd, but the NBIC award allowed the exploration of how the technologies could be applied on modern wound care substrates and also enabled evaluation of wound dressing prototypes in robust antibiofilm models". The project has been successfully completed, with all outcomes achieved. Two routes for advancement of the project are being pursued: sharing of the results with targeted industry partner(s) with a view to generate collaboration and co-development projects, and to seek further funding based on further development of synergistic antibiofilm compositions and further development of deployment techniques.
Start Year 2018
 
Description NBIC POC 01POC18015 Development of Next Generation Synergistic Antibiofilm Treatments for Wounds (Stephen Russell) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim is to determine the feasibility of producing a new prototype wound dressing incorporating an innovative synergistic antimicrobial and antibiofilm patent pending technology being developed by T-EDTA Ltd, 5DHPG Ltd and Medipure Ltd (currently at TRL 3), and internationally-leading expertise in fibre and fabric manufacturing at the UoL. This will involve integration of a new antibiofilm formulation, with a fibrous wound dressing made of a clinically relevant, low adherent gelating polymer e.g. polysaccharide-based or poly(vinyl alcohol) (PVA). The specific objectives are to: 1. Develop a new antibiofilm formulation that can be effectively integrated with advanced dressing fabrics in a scalable and cost-effective fashion to enable long-lasting antimicrobial function across the fibre surfaces within the dressing; 2. Advance the development of the antibiofilm formulation and understand its efficacy, mode of action and characteristics; 3. Evaluate the enhanced antibiofilm performance when the formulation is combined within and on specific fibrous systems for use in woundcare. This will provide a platform to develop highly effective therapies for the management of biofilms in wounds in future work and the delivery of next generation fast acting antibiofilm synergistic compositions capable of promoting healing in infected wounds. The future work will involve developing infection responsive fibrous polymer building blocks that can be integrated within the wound dressing, to facilitate smart response to markers of infection. The major advance will be the development of wound dressing designs and manufacturing technologies that can be potentially upscaled and used to tackle newly identified clinical conditions currently not catered for.
Collaborator Contribution Full collaborative partners in this POC project.
Impact • Electrospraying, coupled with formulation of spraying solutions with alcohol to reduce surface tension and increase air transit evaporation is a suitable method for deployment of aqueous antibiofilm compositions based on T-EDTA. • The two synergistic compositions T-EDTA/Suprox, and AgCuEDTA exhibited powerful antibiofilm characteristics on both CMC and alginate substrates in two models, whilst moderate activity was found for the drip-flow model. This could be explained by the removal of some of the active material in the flow regime of the drip-flow. Commercial dressings follow similar observations. • Overall, some variability in results was present, possibly suggesting local variability in level applied, and total level. NBIC case study: Annually over 18 million patients globally suffer from chronic wounds, of which over 50% will develop a localised infection due to biofilms, a major impediment to wound healing, and long term health. This can lead to increased health service costs, morbidity and further complications for the patient, which ultimately includes amputation. The indicative annual cost for wound management in Europe accounts for 2-4% of health-care budgets and has been estimated to be as high as €10 billion. Current antimicrobials in woundcare have limited effectiveness against biofilms. The project, 'Development of Next Generation synergistic antibiofilm treatments for wounds' was awarded an NBIC Proof of Concept (POC) award and in-kind contributions from 5DHPG Ltd, enabling process development work and prototype production to be carried out at the University of Leeds, whilst 5DHPG supplied raw materials and carried out antimicrobial and antibiofilm testing. The innovative approach of the project was the development of a synergistic combination of both antimicrobials in combination with 5Ds patent protected antibiofilm agents into one formulation, and its incorporation into modern hydrogel-based low adherent fibrous wound dressing. Two synergistic compositions, including metalised chelating agents applied to both carboxymethylcellulose and alginate substrates exhibited outstanding antibiofilm performance. With further development work, these technologies could be readily commercialised by companies operating in the advanced wound care space. Dr Steve Law, Research and Innovation Manager, 5D Health Protection Group Ltd said, "The novel antibiofilm technologies had been developed to laboratory scale by 5DHPG Ltd, but the NBIC award allowed the exploration of how the technologies could be applied on modern wound care substrates and also enabled evaluation of wound dressing prototypes in robust antibiofilm models". The project has been successfully completed, with all outcomes achieved. Two routes for advancement of the project are being pursued: sharing of the results with targeted industry partner(s) with a view to generate collaboration and co-development projects, and to seek further funding based on further development of synergistic antibiofilm compositions and further development of deployment techniques.
Start Year 2018
 
Description NBIC POC 01POC18015 Development of Next Generation Synergistic Antibiofilm Treatments for Wounds (Stephen Russell) 
Organisation T-EDTA Ltd
Country United Kingdom 
Sector Private 
PI Contribution The aim is to determine the feasibility of producing a new prototype wound dressing incorporating an innovative synergistic antimicrobial and antibiofilm patent pending technology being developed by T-EDTA Ltd, 5DHPG Ltd and Medipure Ltd (currently at TRL 3), and internationally-leading expertise in fibre and fabric manufacturing at the UoL. This will involve integration of a new antibiofilm formulation, with a fibrous wound dressing made of a clinically relevant, low adherent gelating polymer e.g. polysaccharide-based or poly(vinyl alcohol) (PVA). The specific objectives are to: 1. Develop a new antibiofilm formulation that can be effectively integrated with advanced dressing fabrics in a scalable and cost-effective fashion to enable long-lasting antimicrobial function across the fibre surfaces within the dressing; 2. Advance the development of the antibiofilm formulation and understand its efficacy, mode of action and characteristics; 3. Evaluate the enhanced antibiofilm performance when the formulation is combined within and on specific fibrous systems for use in woundcare. This will provide a platform to develop highly effective therapies for the management of biofilms in wounds in future work and the delivery of next generation fast acting antibiofilm synergistic compositions capable of promoting healing in infected wounds. The future work will involve developing infection responsive fibrous polymer building blocks that can be integrated within the wound dressing, to facilitate smart response to markers of infection. The major advance will be the development of wound dressing designs and manufacturing technologies that can be potentially upscaled and used to tackle newly identified clinical conditions currently not catered for.
Collaborator Contribution Full collaborative partners in this POC project.
Impact • Electrospraying, coupled with formulation of spraying solutions with alcohol to reduce surface tension and increase air transit evaporation is a suitable method for deployment of aqueous antibiofilm compositions based on T-EDTA. • The two synergistic compositions T-EDTA/Suprox, and AgCuEDTA exhibited powerful antibiofilm characteristics on both CMC and alginate substrates in two models, whilst moderate activity was found for the drip-flow model. This could be explained by the removal of some of the active material in the flow regime of the drip-flow. Commercial dressings follow similar observations. • Overall, some variability in results was present, possibly suggesting local variability in level applied, and total level. NBIC case study: Annually over 18 million patients globally suffer from chronic wounds, of which over 50% will develop a localised infection due to biofilms, a major impediment to wound healing, and long term health. This can lead to increased health service costs, morbidity and further complications for the patient, which ultimately includes amputation. The indicative annual cost for wound management in Europe accounts for 2-4% of health-care budgets and has been estimated to be as high as €10 billion. Current antimicrobials in woundcare have limited effectiveness against biofilms. The project, 'Development of Next Generation synergistic antibiofilm treatments for wounds' was awarded an NBIC Proof of Concept (POC) award and in-kind contributions from 5DHPG Ltd, enabling process development work and prototype production to be carried out at the University of Leeds, whilst 5DHPG supplied raw materials and carried out antimicrobial and antibiofilm testing. The innovative approach of the project was the development of a synergistic combination of both antimicrobials in combination with 5Ds patent protected antibiofilm agents into one formulation, and its incorporation into modern hydrogel-based low adherent fibrous wound dressing. Two synergistic compositions, including metalised chelating agents applied to both carboxymethylcellulose and alginate substrates exhibited outstanding antibiofilm performance. With further development work, these technologies could be readily commercialised by companies operating in the advanced wound care space. Dr Steve Law, Research and Innovation Manager, 5D Health Protection Group Ltd said, "The novel antibiofilm technologies had been developed to laboratory scale by 5DHPG Ltd, but the NBIC award allowed the exploration of how the technologies could be applied on modern wound care substrates and also enabled evaluation of wound dressing prototypes in robust antibiofilm models". The project has been successfully completed, with all outcomes achieved. Two routes for advancement of the project are being pursued: sharing of the results with targeted industry partner(s) with a view to generate collaboration and co-development projects, and to seek further funding based on further development of synergistic antibiofilm compositions and further development of deployment techniques.
Start Year 2018
 
Description NBIC POC 01POC18015 Development of Next Generation Synergistic Antibiofilm Treatments for Wounds (Stephen Russell) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution The aim is to determine the feasibility of producing a new prototype wound dressing incorporating an innovative synergistic antimicrobial and antibiofilm patent pending technology being developed by T-EDTA Ltd, 5DHPG Ltd and Medipure Ltd (currently at TRL 3), and internationally-leading expertise in fibre and fabric manufacturing at the UoL. This will involve integration of a new antibiofilm formulation, with a fibrous wound dressing made of a clinically relevant, low adherent gelating polymer e.g. polysaccharide-based or poly(vinyl alcohol) (PVA). The specific objectives are to: 1. Develop a new antibiofilm formulation that can be effectively integrated with advanced dressing fabrics in a scalable and cost-effective fashion to enable long-lasting antimicrobial function across the fibre surfaces within the dressing; 2. Advance the development of the antibiofilm formulation and understand its efficacy, mode of action and characteristics; 3. Evaluate the enhanced antibiofilm performance when the formulation is combined within and on specific fibrous systems for use in woundcare. This will provide a platform to develop highly effective therapies for the management of biofilms in wounds in future work and the delivery of next generation fast acting antibiofilm synergistic compositions capable of promoting healing in infected wounds. The future work will involve developing infection responsive fibrous polymer building blocks that can be integrated within the wound dressing, to facilitate smart response to markers of infection. The major advance will be the development of wound dressing designs and manufacturing technologies that can be potentially upscaled and used to tackle newly identified clinical conditions currently not catered for.
Collaborator Contribution Full collaborative partners in this POC project.
Impact • Electrospraying, coupled with formulation of spraying solutions with alcohol to reduce surface tension and increase air transit evaporation is a suitable method for deployment of aqueous antibiofilm compositions based on T-EDTA. • The two synergistic compositions T-EDTA/Suprox, and AgCuEDTA exhibited powerful antibiofilm characteristics on both CMC and alginate substrates in two models, whilst moderate activity was found for the drip-flow model. This could be explained by the removal of some of the active material in the flow regime of the drip-flow. Commercial dressings follow similar observations. • Overall, some variability in results was present, possibly suggesting local variability in level applied, and total level. NBIC case study: Annually over 18 million patients globally suffer from chronic wounds, of which over 50% will develop a localised infection due to biofilms, a major impediment to wound healing, and long term health. This can lead to increased health service costs, morbidity and further complications for the patient, which ultimately includes amputation. The indicative annual cost for wound management in Europe accounts for 2-4% of health-care budgets and has been estimated to be as high as €10 billion. Current antimicrobials in woundcare have limited effectiveness against biofilms. The project, 'Development of Next Generation synergistic antibiofilm treatments for wounds' was awarded an NBIC Proof of Concept (POC) award and in-kind contributions from 5DHPG Ltd, enabling process development work and prototype production to be carried out at the University of Leeds, whilst 5DHPG supplied raw materials and carried out antimicrobial and antibiofilm testing. The innovative approach of the project was the development of a synergistic combination of both antimicrobials in combination with 5Ds patent protected antibiofilm agents into one formulation, and its incorporation into modern hydrogel-based low adherent fibrous wound dressing. Two synergistic compositions, including metalised chelating agents applied to both carboxymethylcellulose and alginate substrates exhibited outstanding antibiofilm performance. With further development work, these technologies could be readily commercialised by companies operating in the advanced wound care space. Dr Steve Law, Research and Innovation Manager, 5D Health Protection Group Ltd said, "The novel antibiofilm technologies had been developed to laboratory scale by 5DHPG Ltd, but the NBIC award allowed the exploration of how the technologies could be applied on modern wound care substrates and also enabled evaluation of wound dressing prototypes in robust antibiofilm models". The project has been successfully completed, with all outcomes achieved. Two routes for advancement of the project are being pursued: sharing of the results with targeted industry partner(s) with a view to generate collaboration and co-development projects, and to seek further funding based on further development of synergistic antibiofilm compositions and further development of deployment techniques.
Start Year 2018
 
Description NBIC POC 01POC18015 Development of Next Generation Synergistic Antibiofilm Treatments for Wounds (Stephen Russell) 
Organisation University of Leeds
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim is to determine the feasibility of producing a new prototype wound dressing incorporating an innovative synergistic antimicrobial and antibiofilm patent pending technology being developed by T-EDTA Ltd, 5DHPG Ltd and Medipure Ltd (currently at TRL 3), and internationally-leading expertise in fibre and fabric manufacturing at the UoL. This will involve integration of a new antibiofilm formulation, with a fibrous wound dressing made of a clinically relevant, low adherent gelating polymer e.g. polysaccharide-based or poly(vinyl alcohol) (PVA). The specific objectives are to: 1. Develop a new antibiofilm formulation that can be effectively integrated with advanced dressing fabrics in a scalable and cost-effective fashion to enable long-lasting antimicrobial function across the fibre surfaces within the dressing; 2. Advance the development of the antibiofilm formulation and understand its efficacy, mode of action and characteristics; 3. Evaluate the enhanced antibiofilm performance when the formulation is combined within and on specific fibrous systems for use in woundcare. This will provide a platform to develop highly effective therapies for the management of biofilms in wounds in future work and the delivery of next generation fast acting antibiofilm synergistic compositions capable of promoting healing in infected wounds. The future work will involve developing infection responsive fibrous polymer building blocks that can be integrated within the wound dressing, to facilitate smart response to markers of infection. The major advance will be the development of wound dressing designs and manufacturing technologies that can be potentially upscaled and used to tackle newly identified clinical conditions currently not catered for.
Collaborator Contribution Full collaborative partners in this POC project.
Impact • Electrospraying, coupled with formulation of spraying solutions with alcohol to reduce surface tension and increase air transit evaporation is a suitable method for deployment of aqueous antibiofilm compositions based on T-EDTA. • The two synergistic compositions T-EDTA/Suprox, and AgCuEDTA exhibited powerful antibiofilm characteristics on both CMC and alginate substrates in two models, whilst moderate activity was found for the drip-flow model. This could be explained by the removal of some of the active material in the flow regime of the drip-flow. Commercial dressings follow similar observations. • Overall, some variability in results was present, possibly suggesting local variability in level applied, and total level. NBIC case study: Annually over 18 million patients globally suffer from chronic wounds, of which over 50% will develop a localised infection due to biofilms, a major impediment to wound healing, and long term health. This can lead to increased health service costs, morbidity and further complications for the patient, which ultimately includes amputation. The indicative annual cost for wound management in Europe accounts for 2-4% of health-care budgets and has been estimated to be as high as €10 billion. Current antimicrobials in woundcare have limited effectiveness against biofilms. The project, 'Development of Next Generation synergistic antibiofilm treatments for wounds' was awarded an NBIC Proof of Concept (POC) award and in-kind contributions from 5DHPG Ltd, enabling process development work and prototype production to be carried out at the University of Leeds, whilst 5DHPG supplied raw materials and carried out antimicrobial and antibiofilm testing. The innovative approach of the project was the development of a synergistic combination of both antimicrobials in combination with 5Ds patent protected antibiofilm agents into one formulation, and its incorporation into modern hydrogel-based low adherent fibrous wound dressing. Two synergistic compositions, including metalised chelating agents applied to both carboxymethylcellulose and alginate substrates exhibited outstanding antibiofilm performance. With further development work, these technologies could be readily commercialised by companies operating in the advanced wound care space. Dr Steve Law, Research and Innovation Manager, 5D Health Protection Group Ltd said, "The novel antibiofilm technologies had been developed to laboratory scale by 5DHPG Ltd, but the NBIC award allowed the exploration of how the technologies could be applied on modern wound care substrates and also enabled evaluation of wound dressing prototypes in robust antibiofilm models". The project has been successfully completed, with all outcomes achieved. Two routes for advancement of the project are being pursued: sharing of the results with targeted industry partner(s) with a view to generate collaboration and co-development projects, and to seek further funding based on further development of synergistic antibiofilm compositions and further development of deployment techniques.
Start Year 2018
 
Description NBIC POC 01POC18018 Blue light treatment of Listeria Under Environmental conditions (Mark Webber) 
Organisation Chilled Food Association
Country United Kingdom 
Sector Private 
PI Contribution • The use of blue light as an antimicrobial to eradicate listeria is known. However, its use on surfaces and isolates relevant to production has not been explored. QIB has undertaken a focused freedom to operate search for "Blue Light and Listeria". The search revealed one potentially relevant patent application, WO2017/205578, which includes the following claim: • A method for photoeradication of microorganisms from a target, the method comprising: irradiating the target with purple or blue light in a pulsed mode of irradiation in accordance with an irradiation schedule that includes a plurality of irradiation sessions, wherein the irradiation sessions are provided at a plurality of time intervals so as to cause photoeradication of all or a portion of the microorganisms. • This claim is very broad, and the International Examiner has noted that it lacks novelty and inventive step. The claim is therefore extremely likely to need to be narrowed or deleted before the application will be granted. The only claims in this application that are currently novel and inventive are systems claims to control an irradiation schedule of blue light. These claims are not of concern to the proposed research. We will monitor progression of this application; however, we are confident that the application will not be of concern to the proposed research. • QIB has also undertaken a broader freedom to operate search for "blue light and (antimicrobial or antibacterial or antiviral or antibiotic or antimycotic)". This search revealed 92 hits. A review of these hits revealed no results relevant to the proposed research. • Protection and/or commercialisation of any foreground IP will be discussed between QIB and CFA as research progresses.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Blue light is attractive as additional control measure for the food production industry, where it is impossible to maintain a sterile environment and there is a constant supply of organic material for bacterial growth. Use of blue light has been reported to be effective against L. monocytogenes and increase sensitivity to disinfectants, however, studies are often non-representative of factory conditions and/or use a high intensity of 405 nm light (Li et al., 2018). Whilst this study did highlight some antimicrobial effects of 405 nm, for example, against planktonic Listeria, these results did not translate into inhibited/reduced biofilm formation when using more realistic in-use conditions (2.5 W/m2 of light, factory relevant conditions and temperatures). Increased sensitivity to disinfectants was seen after light exposure but at concentrations far lower than those used in situ and this may not translate in the presence of organic matter where concentrations much higher than the MBCs were required to provide a killing effect. Notably, at a lower intensity (0.2 W/m2), an increase in biofilm formation under chilled conditions was observed from light treated biofilms when compared to non-exposed controls. This is a concern as this could have implications in the food production industry where surfaces are at many heights and exposure levels will inevitably vary. In conclusion, at the intensity tested, under chilled conditions, 405 nm blue light did not show promise to enhance biocontrol of L. monocytogenes in the food processing environment. Further work: • A publication will be prepared in collaboration with the CFA. • Microscopy and genetic information will become available and be incorporated in this publication. Case study by NBIC: We regularly help our Industrial Partners to find suitable academic partners within NBIC to collaborate on solving their applied problem areas. One such partner is the Chilled Food Association (CFA) and we worked with them to create a problem statement around one of these relating to the use of safe visible light for biofilm control and disinfection in the chilled food industry. We sent this statement out to our Academic members. Ken Johnston, a Consultant and Advisor to The Chilled Food Association, said, "The CFA is constantly looking for new ways to enhance the efficiency of food manufacture. Listeria monocytogenes is an organism of particular concern to us because of its public health importance and its toughness in biofilm environments. Through NBIC's network we found a suitable partner, the Quadram Institute, where Dr Mark Webber leads the antimicrobial resistance group, to help us evaluate novel approaches to the control of listeria." "We have been close to NBIC since day one and when we saw the problem statement, we're able to respond immediately as we have experience in this area and met with Ken to identify the work needed to address this problem. We submitted an application to NBIC's first Proof of Concept project call for a 6-month project and were delighted to be successful," says Dr Webber. The CFA/Quadram Proof of Concept project has recently started and the practical work is led by Dr Chloe Hutchins. The project demonstrates how NBIC can be engaged in understanding and disseminating unmet needs, finding partners and then enabling translation.
Start Year 2019
 
Description NBIC POC 01POC18018 Blue light treatment of Listeria Under Environmental conditions (Mark Webber) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution • The use of blue light as an antimicrobial to eradicate listeria is known. However, its use on surfaces and isolates relevant to production has not been explored. QIB has undertaken a focused freedom to operate search for "Blue Light and Listeria". The search revealed one potentially relevant patent application, WO2017/205578, which includes the following claim: • A method for photoeradication of microorganisms from a target, the method comprising: irradiating the target with purple or blue light in a pulsed mode of irradiation in accordance with an irradiation schedule that includes a plurality of irradiation sessions, wherein the irradiation sessions are provided at a plurality of time intervals so as to cause photoeradication of all or a portion of the microorganisms. • This claim is very broad, and the International Examiner has noted that it lacks novelty and inventive step. The claim is therefore extremely likely to need to be narrowed or deleted before the application will be granted. The only claims in this application that are currently novel and inventive are systems claims to control an irradiation schedule of blue light. These claims are not of concern to the proposed research. We will monitor progression of this application; however, we are confident that the application will not be of concern to the proposed research. • QIB has also undertaken a broader freedom to operate search for "blue light and (antimicrobial or antibacterial or antiviral or antibiotic or antimycotic)". This search revealed 92 hits. A review of these hits revealed no results relevant to the proposed research. • Protection and/or commercialisation of any foreground IP will be discussed between QIB and CFA as research progresses.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Blue light is attractive as additional control measure for the food production industry, where it is impossible to maintain a sterile environment and there is a constant supply of organic material for bacterial growth. Use of blue light has been reported to be effective against L. monocytogenes and increase sensitivity to disinfectants, however, studies are often non-representative of factory conditions and/or use a high intensity of 405 nm light (Li et al., 2018). Whilst this study did highlight some antimicrobial effects of 405 nm, for example, against planktonic Listeria, these results did not translate into inhibited/reduced biofilm formation when using more realistic in-use conditions (2.5 W/m2 of light, factory relevant conditions and temperatures). Increased sensitivity to disinfectants was seen after light exposure but at concentrations far lower than those used in situ and this may not translate in the presence of organic matter where concentrations much higher than the MBCs were required to provide a killing effect. Notably, at a lower intensity (0.2 W/m2), an increase in biofilm formation under chilled conditions was observed from light treated biofilms when compared to non-exposed controls. This is a concern as this could have implications in the food production industry where surfaces are at many heights and exposure levels will inevitably vary. In conclusion, at the intensity tested, under chilled conditions, 405 nm blue light did not show promise to enhance biocontrol of L. monocytogenes in the food processing environment. Further work: • A publication will be prepared in collaboration with the CFA. • Microscopy and genetic information will become available and be incorporated in this publication. Case study by NBIC: We regularly help our Industrial Partners to find suitable academic partners within NBIC to collaborate on solving their applied problem areas. One such partner is the Chilled Food Association (CFA) and we worked with them to create a problem statement around one of these relating to the use of safe visible light for biofilm control and disinfection in the chilled food industry. We sent this statement out to our Academic members. Ken Johnston, a Consultant and Advisor to The Chilled Food Association, said, "The CFA is constantly looking for new ways to enhance the efficiency of food manufacture. Listeria monocytogenes is an organism of particular concern to us because of its public health importance and its toughness in biofilm environments. Through NBIC's network we found a suitable partner, the Quadram Institute, where Dr Mark Webber leads the antimicrobial resistance group, to help us evaluate novel approaches to the control of listeria." "We have been close to NBIC since day one and when we saw the problem statement, we're able to respond immediately as we have experience in this area and met with Ken to identify the work needed to address this problem. We submitted an application to NBIC's first Proof of Concept project call for a 6-month project and were delighted to be successful," says Dr Webber. The CFA/Quadram Proof of Concept project has recently started and the practical work is led by Dr Chloe Hutchins. The project demonstrates how NBIC can be engaged in understanding and disseminating unmet needs, finding partners and then enabling translation.
Start Year 2019
 
Description NBIC POC 01POC18018 Blue light treatment of Listeria Under Environmental conditions (Mark Webber) 
Organisation Quadram Institute Bioscience
Country United Kingdom 
Sector Academic/University 
PI Contribution • The use of blue light as an antimicrobial to eradicate listeria is known. However, its use on surfaces and isolates relevant to production has not been explored. QIB has undertaken a focused freedom to operate search for "Blue Light and Listeria". The search revealed one potentially relevant patent application, WO2017/205578, which includes the following claim: • A method for photoeradication of microorganisms from a target, the method comprising: irradiating the target with purple or blue light in a pulsed mode of irradiation in accordance with an irradiation schedule that includes a plurality of irradiation sessions, wherein the irradiation sessions are provided at a plurality of time intervals so as to cause photoeradication of all or a portion of the microorganisms. • This claim is very broad, and the International Examiner has noted that it lacks novelty and inventive step. The claim is therefore extremely likely to need to be narrowed or deleted before the application will be granted. The only claims in this application that are currently novel and inventive are systems claims to control an irradiation schedule of blue light. These claims are not of concern to the proposed research. We will monitor progression of this application; however, we are confident that the application will not be of concern to the proposed research. • QIB has also undertaken a broader freedom to operate search for "blue light and (antimicrobial or antibacterial or antiviral or antibiotic or antimycotic)". This search revealed 92 hits. A review of these hits revealed no results relevant to the proposed research. • Protection and/or commercialisation of any foreground IP will be discussed between QIB and CFA as research progresses.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Blue light is attractive as additional control measure for the food production industry, where it is impossible to maintain a sterile environment and there is a constant supply of organic material for bacterial growth. Use of blue light has been reported to be effective against L. monocytogenes and increase sensitivity to disinfectants, however, studies are often non-representative of factory conditions and/or use a high intensity of 405 nm light (Li et al., 2018). Whilst this study did highlight some antimicrobial effects of 405 nm, for example, against planktonic Listeria, these results did not translate into inhibited/reduced biofilm formation when using more realistic in-use conditions (2.5 W/m2 of light, factory relevant conditions and temperatures). Increased sensitivity to disinfectants was seen after light exposure but at concentrations far lower than those used in situ and this may not translate in the presence of organic matter where concentrations much higher than the MBCs were required to provide a killing effect. Notably, at a lower intensity (0.2 W/m2), an increase in biofilm formation under chilled conditions was observed from light treated biofilms when compared to non-exposed controls. This is a concern as this could have implications in the food production industry where surfaces are at many heights and exposure levels will inevitably vary. In conclusion, at the intensity tested, under chilled conditions, 405 nm blue light did not show promise to enhance biocontrol of L. monocytogenes in the food processing environment. Further work: • A publication will be prepared in collaboration with the CFA. • Microscopy and genetic information will become available and be incorporated in this publication. Case study by NBIC: We regularly help our Industrial Partners to find suitable academic partners within NBIC to collaborate on solving their applied problem areas. One such partner is the Chilled Food Association (CFA) and we worked with them to create a problem statement around one of these relating to the use of safe visible light for biofilm control and disinfection in the chilled food industry. We sent this statement out to our Academic members. Ken Johnston, a Consultant and Advisor to The Chilled Food Association, said, "The CFA is constantly looking for new ways to enhance the efficiency of food manufacture. Listeria monocytogenes is an organism of particular concern to us because of its public health importance and its toughness in biofilm environments. Through NBIC's network we found a suitable partner, the Quadram Institute, where Dr Mark Webber leads the antimicrobial resistance group, to help us evaluate novel approaches to the control of listeria." "We have been close to NBIC since day one and when we saw the problem statement, we're able to respond immediately as we have experience in this area and met with Ken to identify the work needed to address this problem. We submitted an application to NBIC's first Proof of Concept project call for a 6-month project and were delighted to be successful," says Dr Webber. The CFA/Quadram Proof of Concept project has recently started and the practical work is led by Dr Chloe Hutchins. The project demonstrates how NBIC can be engaged in understanding and disseminating unmet needs, finding partners and then enabling translation.
Start Year 2019
 
Description NBIC POC 01POC18019 PlasmaHeal: Cold plasma to control biofilms in wound dressings and at the Wound/dressing interface. (James Walsh) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution The overall concept of this project is to develop a prototype wound dressing that has the ability to generate, in-situ, a rich cocktail of antimicrobial agents directly at the point of need. This project will have four interlinked objectives: 1. To develop a low-cost and safe to use 'proof of concept' prototype plasma system that is fully encapsulated within a wound dressing; 2. Uncover the underpinning decontamination pathways and optimise the performance of the plasma device by manipulating the underpinning plasma chemistry; 3. Establish the necessary plasma dosage and number of treatments required to maintain a biofilm free wound dressing (at the wound dressing interphase/wound surface); 4. Evaluate and validate the device under more realistic in vitro wound care conditions. Successful completion of the primary objectives will result in a prototype device that showcases the readiness and suitability of the technology for potential further funding and future commercial development. It is envisaged that the technology will be commercialised, with suitable follow-on funding, as a low-cost plasma source that operates in conjunction with a specialised wound dressing containing a set of embedded electrodes. The battery operated device could be permanently attached to the dressing and administer a dose of plasma species, as and when required, or, alternatively could be attached intermittently by a healthcare professional or patient. It is anticipated that such a system would greatly enhance the effectiveness of the wound dressing and consequently provide a significant benefit to patients. A key feature of this system is the combined use of an advanced wound dressing and a plasma discharge, providing a synergistic effect to manage the biofilms and alter the microbiome within the wound dressing, within the wound and at the wound/dressing interphase which will help to enhance cellular healing.
Collaborator Contribution Full collaborators in this POC project.
Impact Proof of concept successful - resulted in a novel technology/product. - The developed flexible SBD device was found to be highly effective at decontaminating pathogens relevant to chronic wound infections and is well suited for the integration within a wound dressing. Furthermore, the device was made to be user-friendly requiring only a simple on/off switch to use. - The developed system proved to be an effective tool for the removal of bacterial biofilms, using P. aeruginosa as a representative strain. Complete inactivation of P. aeruginosa biofilms were observed within 4 minutes of plasma treatment at 9 W. A lower power discharge (of 4 W) also demonstrated bactericidal capabilities but lacked efficiency as only a 3-log reduction was achieved in a 2-minute exposure time. IP application to be filled. IP to be commercialised with current partners (skincare, woundcare). Research paper to be published. Further funding with a different company: Further from the data etc generated by the NBIC grant we received further funding from Innovate UK with Extronics. Exposure to new relationship and new ways of interdisciplinary working (with an engineer). Recruitment and job creation in 5D - indirectly 3 - 4 staff taken on. University of Liverpool in collaboration with 5D Health have applied for a larger £1.2M Innovate UK grant (unsuccessful). 5D Health have received further funding from Innovate UK with Extronics to pursue the area outside of woundcare (https://www.hsmemagazine.com/article/extronics-awarded-development-fund-for-social-distancing-contact-tracing-solution/).
Start Year 2019
 
Description NBIC POC 01POC18019 PlasmaHeal: Cold plasma to control biofilms in wound dressings and at the Wound/dressing interface. (James Walsh) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall concept of this project is to develop a prototype wound dressing that has the ability to generate, in-situ, a rich cocktail of antimicrobial agents directly at the point of need. This project will have four interlinked objectives: 1. To develop a low-cost and safe to use 'proof of concept' prototype plasma system that is fully encapsulated within a wound dressing; 2. Uncover the underpinning decontamination pathways and optimise the performance of the plasma device by manipulating the underpinning plasma chemistry; 3. Establish the necessary plasma dosage and number of treatments required to maintain a biofilm free wound dressing (at the wound dressing interphase/wound surface); 4. Evaluate and validate the device under more realistic in vitro wound care conditions. Successful completion of the primary objectives will result in a prototype device that showcases the readiness and suitability of the technology for potential further funding and future commercial development. It is envisaged that the technology will be commercialised, with suitable follow-on funding, as a low-cost plasma source that operates in conjunction with a specialised wound dressing containing a set of embedded electrodes. The battery operated device could be permanently attached to the dressing and administer a dose of plasma species, as and when required, or, alternatively could be attached intermittently by a healthcare professional or patient. It is anticipated that such a system would greatly enhance the effectiveness of the wound dressing and consequently provide a significant benefit to patients. A key feature of this system is the combined use of an advanced wound dressing and a plasma discharge, providing a synergistic effect to manage the biofilms and alter the microbiome within the wound dressing, within the wound and at the wound/dressing interphase which will help to enhance cellular healing.
Collaborator Contribution Full collaborators in this POC project.
Impact Proof of concept successful - resulted in a novel technology/product. - The developed flexible SBD device was found to be highly effective at decontaminating pathogens relevant to chronic wound infections and is well suited for the integration within a wound dressing. Furthermore, the device was made to be user-friendly requiring only a simple on/off switch to use. - The developed system proved to be an effective tool for the removal of bacterial biofilms, using P. aeruginosa as a representative strain. Complete inactivation of P. aeruginosa biofilms were observed within 4 minutes of plasma treatment at 9 W. A lower power discharge (of 4 W) also demonstrated bactericidal capabilities but lacked efficiency as only a 3-log reduction was achieved in a 2-minute exposure time. IP application to be filled. IP to be commercialised with current partners (skincare, woundcare). Research paper to be published. Further funding with a different company: Further from the data etc generated by the NBIC grant we received further funding from Innovate UK with Extronics. Exposure to new relationship and new ways of interdisciplinary working (with an engineer). Recruitment and job creation in 5D - indirectly 3 - 4 staff taken on. University of Liverpool in collaboration with 5D Health have applied for a larger £1.2M Innovate UK grant (unsuccessful). 5D Health have received further funding from Innovate UK with Extronics to pursue the area outside of woundcare (https://www.hsmemagazine.com/article/extronics-awarded-development-fund-for-social-distancing-contact-tracing-solution/).
Start Year 2019
 
Description NBIC POC 01POC18019 PlasmaHeal: Cold plasma to control biofilms in wound dressings and at the Wound/dressing interface. (James Walsh) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall concept of this project is to develop a prototype wound dressing that has the ability to generate, in-situ, a rich cocktail of antimicrobial agents directly at the point of need. This project will have four interlinked objectives: 1. To develop a low-cost and safe to use 'proof of concept' prototype plasma system that is fully encapsulated within a wound dressing; 2. Uncover the underpinning decontamination pathways and optimise the performance of the plasma device by manipulating the underpinning plasma chemistry; 3. Establish the necessary plasma dosage and number of treatments required to maintain a biofilm free wound dressing (at the wound dressing interphase/wound surface); 4. Evaluate and validate the device under more realistic in vitro wound care conditions. Successful completion of the primary objectives will result in a prototype device that showcases the readiness and suitability of the technology for potential further funding and future commercial development. It is envisaged that the technology will be commercialised, with suitable follow-on funding, as a low-cost plasma source that operates in conjunction with a specialised wound dressing containing a set of embedded electrodes. The battery operated device could be permanently attached to the dressing and administer a dose of plasma species, as and when required, or, alternatively could be attached intermittently by a healthcare professional or patient. It is anticipated that such a system would greatly enhance the effectiveness of the wound dressing and consequently provide a significant benefit to patients. A key feature of this system is the combined use of an advanced wound dressing and a plasma discharge, providing a synergistic effect to manage the biofilms and alter the microbiome within the wound dressing, within the wound and at the wound/dressing interphase which will help to enhance cellular healing.
Collaborator Contribution Full collaborators in this POC project.
Impact Proof of concept successful - resulted in a novel technology/product. - The developed flexible SBD device was found to be highly effective at decontaminating pathogens relevant to chronic wound infections and is well suited for the integration within a wound dressing. Furthermore, the device was made to be user-friendly requiring only a simple on/off switch to use. - The developed system proved to be an effective tool for the removal of bacterial biofilms, using P. aeruginosa as a representative strain. Complete inactivation of P. aeruginosa biofilms were observed within 4 minutes of plasma treatment at 9 W. A lower power discharge (of 4 W) also demonstrated bactericidal capabilities but lacked efficiency as only a 3-log reduction was achieved in a 2-minute exposure time. IP application to be filled. IP to be commercialised with current partners (skincare, woundcare). Research paper to be published. Further funding with a different company: Further from the data etc generated by the NBIC grant we received further funding from Innovate UK with Extronics. Exposure to new relationship and new ways of interdisciplinary working (with an engineer). Recruitment and job creation in 5D - indirectly 3 - 4 staff taken on. University of Liverpool in collaboration with 5D Health have applied for a larger £1.2M Innovate UK grant (unsuccessful). 5D Health have received further funding from Innovate UK with Extronics to pursue the area outside of woundcare (https://www.hsmemagazine.com/article/extronics-awarded-development-fund-for-social-distancing-contact-tracing-solution/).
Start Year 2019
 
Description NBIC POC 01POC18020 Development of a Moving Membrane Bioreactor (MMBR) for the Automated Cultivation and Harvest of Algae Grown as a Biofilm. (Mike Allen) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This project will deliver the development of a membrane platform for microalgal cultivation as a biofilm. The work continues from previous research (Innovate UK: 132192, 'Development of a Novel Membrane Photobioreactor for the cultivation of Haematococcus pluvialis as a Biofilm'), which proved the benchtop feasibility (TRL4) of a plate type membrane design. During this grant we also began work on a roller based system - the moving membrane bioreactor (MMBR), which we believe has several advantages over the plate design. We aim to further the MMBR at bench scale during this grant (from TRL2 to TRL4) in preparation for a larger technology demonstration (TRL5-6).
Collaborator Contribution Full collaborators in this POC project.
Impact The business impacts are currently confidential pending commercialisation on IP but we can confirm that this collaborative partnership was successful in their application to NBIC POC round 3 which will focus on moving up the TRL. Other impacts include: - Some of the work was able to be used in Ph.D studentship - now submitted and awarded. - The application used a unique AFMicroscopy tool in a pioneering way for biofilm observation and this technique is being deployed in other fields e.g. marine fouling. - PML have a research fellow working on GM modified Algae for vaccine production and the intent is to use the MMBR approach to scale this up further. This funding will continue to summer 2022 equating to an in kind contribution from PLM of ~£135k including overheads and consumables. - They intend to explore the MMBR for us in aquaculture for the algae to produce O2 and consume CO2 also for seaweeds seeding onto carriers for food / fuel and fertiliser applications. - BBSRC funded 'Summer Studentship Bursary' of £2500 awarded via UCL: The student will work on the system as a direct follow on from this POC. - There has been skills swapping and transfer between PML and Varicon by staff movements. - Use of MMBR in other fields.
Start Year 2019
 
Description NBIC POC 01POC18020 Development of a Moving Membrane Bioreactor (MMBR) for the Automated Cultivation and Harvest of Algae Grown as a Biofilm. (Mike Allen) 
Organisation Plymouth Marine Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution This project will deliver the development of a membrane platform for microalgal cultivation as a biofilm. The work continues from previous research (Innovate UK: 132192, 'Development of a Novel Membrane Photobioreactor for the cultivation of Haematococcus pluvialis as a Biofilm'), which proved the benchtop feasibility (TRL4) of a plate type membrane design. During this grant we also began work on a roller based system - the moving membrane bioreactor (MMBR), which we believe has several advantages over the plate design. We aim to further the MMBR at bench scale during this grant (from TRL2 to TRL4) in preparation for a larger technology demonstration (TRL5-6).
Collaborator Contribution Full collaborators in this POC project.
Impact The business impacts are currently confidential pending commercialisation on IP but we can confirm that this collaborative partnership was successful in their application to NBIC POC round 3 which will focus on moving up the TRL. Other impacts include: - Some of the work was able to be used in Ph.D studentship - now submitted and awarded. - The application used a unique AFMicroscopy tool in a pioneering way for biofilm observation and this technique is being deployed in other fields e.g. marine fouling. - PML have a research fellow working on GM modified Algae for vaccine production and the intent is to use the MMBR approach to scale this up further. This funding will continue to summer 2022 equating to an in kind contribution from PLM of ~£135k including overheads and consumables. - They intend to explore the MMBR for us in aquaculture for the algae to produce O2 and consume CO2 also for seaweeds seeding onto carriers for food / fuel and fertiliser applications. - BBSRC funded 'Summer Studentship Bursary' of £2500 awarded via UCL: The student will work on the system as a direct follow on from this POC. - There has been skills swapping and transfer between PML and Varicon by staff movements. - Use of MMBR in other fields.
Start Year 2019
 
Description NBIC POC 01POC18020 Development of a Moving Membrane Bioreactor (MMBR) for the Automated Cultivation and Harvest of Algae Grown as a Biofilm. (Mike Allen) 
Organisation Varicon Aqua Solutions Ltd
Country United Kingdom 
Sector Private 
PI Contribution This project will deliver the development of a membrane platform for microalgal cultivation as a biofilm. The work continues from previous research (Innovate UK: 132192, 'Development of a Novel Membrane Photobioreactor for the cultivation of Haematococcus pluvialis as a Biofilm'), which proved the benchtop feasibility (TRL4) of a plate type membrane design. During this grant we also began work on a roller based system - the moving membrane bioreactor (MMBR), which we believe has several advantages over the plate design. We aim to further the MMBR at bench scale during this grant (from TRL2 to TRL4) in preparation for a larger technology demonstration (TRL5-6).
Collaborator Contribution Full collaborators in this POC project.
Impact The business impacts are currently confidential pending commercialisation on IP but we can confirm that this collaborative partnership was successful in their application to NBIC POC round 3 which will focus on moving up the TRL. Other impacts include: - Some of the work was able to be used in Ph.D studentship - now submitted and awarded. - The application used a unique AFMicroscopy tool in a pioneering way for biofilm observation and this technique is being deployed in other fields e.g. marine fouling. - PML have a research fellow working on GM modified Algae for vaccine production and the intent is to use the MMBR approach to scale this up further. This funding will continue to summer 2022 equating to an in kind contribution from PLM of ~£135k including overheads and consumables. - They intend to explore the MMBR for us in aquaculture for the algae to produce O2 and consume CO2 also for seaweeds seeding onto carriers for food / fuel and fertiliser applications. - BBSRC funded 'Summer Studentship Bursary' of £2500 awarded via UCL: The student will work on the system as a direct follow on from this POC. - There has been skills swapping and transfer between PML and Varicon by staff movements. - Use of MMBR in other fields.
Start Year 2019
 
Description NBIC POC 01POC18021 Evaluating an innovative plasma (fourth state of matter) technology for prevention and management of biofilms in the food industry. (Eirini Velliou) 
Organisation Fourth State Medicine Ltd
Country United Kingdom 
Sector Private 
PI Contribution Problem In the food industry, as reported by EFSA and FDA, the increased resistance of biofilm-forming bacteria such as Listeria has led to a need for alternative approaches for decontamination of food and food processing surfaces. Furthermore, there is an increasing consumer-driven demand for food products which have undergone minimal processing. The food industry would hugely benefit from a technology which can disrupt biofilms on food and food processing surfaces, without impacting the nutritional content or sensory characteristics of food. Solution Plasma, the fourth state of matter. Plasma has received much recent attention in bioscience research. Fourth State has developed a platform plasma technology to disrupt the cosmetic and wound care markets, which may be adapted to address agri-food and other adjacent markets. An innovative feature of the technology (granted UK patent, other patents pending) is the production of both "Hot Atmospheric Plasma" (HAP) and "Cold Atmospheric Plasma" (CAP) in the same device. The biological action of CAP is due mainly to the production of bio-active chemical species, while HAP can apply UV light and controllable heat via an inert gas jet. Another innovation (patent pending) is that gaseous effluent from the plasma can either be applied directly or indirectly by feeding through a tube into a closed volume. Channelling and confining plasma effluent allows wide and complex surfaces to be treated, can reduce the size and cost of the plasma source, and allows the plasma source to be located far from the target. Objective The project objective is to evaluate the impact of Fourth State's technology on biofilms in model systems widely relevant to food processing. The project will exploit the University of Surrey's capabilities in culturing and analysing Listeria biofilms on (i) viscoelastic soft food model surfaces and (ii) common surface materials used in food processing.
Collaborator Contribution Full collaborative partners in this POC project.
Impact A fundamental understanding of the role of surface structural and biochemical composition along with the role of microenvironments (e.g. mixed populations, flow rate and temperature) on the resistance of Listeria to various plasma compositions was obtained. They have submitted several applications for studentships and research grants from which they are pending feedback. In terms of dissemination, the team have already published their work in two international conferences, i.e., The American Institute of Chemical Engineering (AIChE) annual meeting in Orlando, USA in November 2019 and the International Conference on Predictive Modelling in Foods (ICPMF) in Braganca, Portugal in September 2019. They have also produced a journal article https://www.sciencedirect.com/science/article/pii/S0963996921000235. 4th State had recently signed a licensing deal for use of their plasma technology in surface disinfection for a light industrial application and this had very much built on the outcomes of the project with UoS in terms of efficacy data. They are utilising the gas stream from the plasma (Ozone and NO) for disinfection. This has required them to scale up the manufacture of devices per month. The intention for 4th State is to be a technology provider to others essentially an "intel inside" type model with their core technology behind deployed by others in their applications. They continue to look for opportunities to work with Eirini on food and have regular discussions with her to support any applications she may be making, 4th state also intend to reach out to Chilled Food Association contacts via NBIC at the right time. NIBC also advised on regulatory matters and put the co in contact with external experts and this has helped guide the commercialising strategy for 4th state. They see more opportunity in the US for deployment into uses where they can make use of the NO application. Right now, medical applications are viewed as very difficult costly and lengthy from a regulatory perspective. NBIC case study: Fourth State is a micro-SME with ambitions of becoming a leading global provider of atmospheric pressure plasma solutions in healthcare and other adjacent markets. Plasma is the 'fourth state of matter' and consists of ionised gas. Examples in nature include lightning strikes, the aurora and the sun, while historical technological applications include etching of silicon chips for smartphones, advanced space propulsion systems and controlled nuclear fusion reactors. The company founders, Dr Thomas Frame and Dr Thomas Harle, saw an opportunity to use their technological expertise in spacecraft systems engineering and applied plasma physics to address urgent terrestrial needs, such as antimicrobial resistance. The team has since developed and patented an innovative platform plasma technology, and developed the company's first product, Nebulaskin®, for non-surgical cosmetic procedures with a number of leading Harley Street clinics. A disruptive wound care product is currently in development. Dr Harle said, "Fourth State sees biofilm management and prevention as a future 'killer app' for plasma technology across a wide range of sectors, so it's fantastic to be working with NBIC to accelerate development and market access for the technology. Access to NBIC Proof of Concept funding has allowed us to build out our network, explore the expansion of our technology into further sectors and provide us with a deeper understanding of the science behind the interaction of plasma and biofilm". Dr Velliou said, "I find the broadness of the NBIC network and remit fascinating. It allows the conduction of so many different types of research on biofilms and enables academics to network with other relevant groups at both national and international level and encourages academics to work directly with industry to drive solutions to practical problems through fundamental research. This interaction is very valuable as we really see our research output accelerated from bench to every-day practice in industry".
Start Year 2019
 
Description NBIC POC 01POC18021 Evaluating an innovative plasma (fourth state of matter) technology for prevention and management of biofilms in the food industry. (Eirini Velliou) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Problem In the food industry, as reported by EFSA and FDA, the increased resistance of biofilm-forming bacteria such as Listeria has led to a need for alternative approaches for decontamination of food and food processing surfaces. Furthermore, there is an increasing consumer-driven demand for food products which have undergone minimal processing. The food industry would hugely benefit from a technology which can disrupt biofilms on food and food processing surfaces, without impacting the nutritional content or sensory characteristics of food. Solution Plasma, the fourth state of matter. Plasma has received much recent attention in bioscience research. Fourth State has developed a platform plasma technology to disrupt the cosmetic and wound care markets, which may be adapted to address agri-food and other adjacent markets. An innovative feature of the technology (granted UK patent, other patents pending) is the production of both "Hot Atmospheric Plasma" (HAP) and "Cold Atmospheric Plasma" (CAP) in the same device. The biological action of CAP is due mainly to the production of bio-active chemical species, while HAP can apply UV light and controllable heat via an inert gas jet. Another innovation (patent pending) is that gaseous effluent from the plasma can either be applied directly or indirectly by feeding through a tube into a closed volume. Channelling and confining plasma effluent allows wide and complex surfaces to be treated, can reduce the size and cost of the plasma source, and allows the plasma source to be located far from the target. Objective The project objective is to evaluate the impact of Fourth State's technology on biofilms in model systems widely relevant to food processing. The project will exploit the University of Surrey's capabilities in culturing and analysing Listeria biofilms on (i) viscoelastic soft food model surfaces and (ii) common surface materials used in food processing.
Collaborator Contribution Full collaborative partners in this POC project.
Impact A fundamental understanding of the role of surface structural and biochemical composition along with the role of microenvironments (e.g. mixed populations, flow rate and temperature) on the resistance of Listeria to various plasma compositions was obtained. They have submitted several applications for studentships and research grants from which they are pending feedback. In terms of dissemination, the team have already published their work in two international conferences, i.e., The American Institute of Chemical Engineering (AIChE) annual meeting in Orlando, USA in November 2019 and the International Conference on Predictive Modelling in Foods (ICPMF) in Braganca, Portugal in September 2019. They have also produced a journal article https://www.sciencedirect.com/science/article/pii/S0963996921000235. 4th State had recently signed a licensing deal for use of their plasma technology in surface disinfection for a light industrial application and this had very much built on the outcomes of the project with UoS in terms of efficacy data. They are utilising the gas stream from the plasma (Ozone and NO) for disinfection. This has required them to scale up the manufacture of devices per month. The intention for 4th State is to be a technology provider to others essentially an "intel inside" type model with their core technology behind deployed by others in their applications. They continue to look for opportunities to work with Eirini on food and have regular discussions with her to support any applications she may be making, 4th state also intend to reach out to Chilled Food Association contacts via NBIC at the right time. NIBC also advised on regulatory matters and put the co in contact with external experts and this has helped guide the commercialising strategy for 4th state. They see more opportunity in the US for deployment into uses where they can make use of the NO application. Right now, medical applications are viewed as very difficult costly and lengthy from a regulatory perspective. NBIC case study: Fourth State is a micro-SME with ambitions of becoming a leading global provider of atmospheric pressure plasma solutions in healthcare and other adjacent markets. Plasma is the 'fourth state of matter' and consists of ionised gas. Examples in nature include lightning strikes, the aurora and the sun, while historical technological applications include etching of silicon chips for smartphones, advanced space propulsion systems and controlled nuclear fusion reactors. The company founders, Dr Thomas Frame and Dr Thomas Harle, saw an opportunity to use their technological expertise in spacecraft systems engineering and applied plasma physics to address urgent terrestrial needs, such as antimicrobial resistance. The team has since developed and patented an innovative platform plasma technology, and developed the company's first product, Nebulaskin®, for non-surgical cosmetic procedures with a number of leading Harley Street clinics. A disruptive wound care product is currently in development. Dr Harle said, "Fourth State sees biofilm management and prevention as a future 'killer app' for plasma technology across a wide range of sectors, so it's fantastic to be working with NBIC to accelerate development and market access for the technology. Access to NBIC Proof of Concept funding has allowed us to build out our network, explore the expansion of our technology into further sectors and provide us with a deeper understanding of the science behind the interaction of plasma and biofilm". Dr Velliou said, "I find the broadness of the NBIC network and remit fascinating. It allows the conduction of so many different types of research on biofilms and enables academics to network with other relevant groups at both national and international level and encourages academics to work directly with industry to drive solutions to practical problems through fundamental research. This interaction is very valuable as we really see our research output accelerated from bench to every-day practice in industry".
Start Year 2019
 
Description NBIC POC 01POC18021 Evaluating an innovative plasma (fourth state of matter) technology for prevention and management of biofilms in the food industry. (Eirini Velliou) 
Organisation University of Surrey
Country United Kingdom 
Sector Academic/University 
PI Contribution Problem In the food industry, as reported by EFSA and FDA, the increased resistance of biofilm-forming bacteria such as Listeria has led to a need for alternative approaches for decontamination of food and food processing surfaces. Furthermore, there is an increasing consumer-driven demand for food products which have undergone minimal processing. The food industry would hugely benefit from a technology which can disrupt biofilms on food and food processing surfaces, without impacting the nutritional content or sensory characteristics of food. Solution Plasma, the fourth state of matter. Plasma has received much recent attention in bioscience research. Fourth State has developed a platform plasma technology to disrupt the cosmetic and wound care markets, which may be adapted to address agri-food and other adjacent markets. An innovative feature of the technology (granted UK patent, other patents pending) is the production of both "Hot Atmospheric Plasma" (HAP) and "Cold Atmospheric Plasma" (CAP) in the same device. The biological action of CAP is due mainly to the production of bio-active chemical species, while HAP can apply UV light and controllable heat via an inert gas jet. Another innovation (patent pending) is that gaseous effluent from the plasma can either be applied directly or indirectly by feeding through a tube into a closed volume. Channelling and confining plasma effluent allows wide and complex surfaces to be treated, can reduce the size and cost of the plasma source, and allows the plasma source to be located far from the target. Objective The project objective is to evaluate the impact of Fourth State's technology on biofilms in model systems widely relevant to food processing. The project will exploit the University of Surrey's capabilities in culturing and analysing Listeria biofilms on (i) viscoelastic soft food model surfaces and (ii) common surface materials used in food processing.
Collaborator Contribution Full collaborative partners in this POC project.
Impact A fundamental understanding of the role of surface structural and biochemical composition along with the role of microenvironments (e.g. mixed populations, flow rate and temperature) on the resistance of Listeria to various plasma compositions was obtained. They have submitted several applications for studentships and research grants from which they are pending feedback. In terms of dissemination, the team have already published their work in two international conferences, i.e., The American Institute of Chemical Engineering (AIChE) annual meeting in Orlando, USA in November 2019 and the International Conference on Predictive Modelling in Foods (ICPMF) in Braganca, Portugal in September 2019. They have also produced a journal article https://www.sciencedirect.com/science/article/pii/S0963996921000235. 4th State had recently signed a licensing deal for use of their plasma technology in surface disinfection for a light industrial application and this had very much built on the outcomes of the project with UoS in terms of efficacy data. They are utilising the gas stream from the plasma (Ozone and NO) for disinfection. This has required them to scale up the manufacture of devices per month. The intention for 4th State is to be a technology provider to others essentially an "intel inside" type model with their core technology behind deployed by others in their applications. They continue to look for opportunities to work with Eirini on food and have regular discussions with her to support any applications she may be making, 4th state also intend to reach out to Chilled Food Association contacts via NBIC at the right time. NIBC also advised on regulatory matters and put the co in contact with external experts and this has helped guide the commercialising strategy for 4th state. They see more opportunity in the US for deployment into uses where they can make use of the NO application. Right now, medical applications are viewed as very difficult costly and lengthy from a regulatory perspective. NBIC case study: Fourth State is a micro-SME with ambitions of becoming a leading global provider of atmospheric pressure plasma solutions in healthcare and other adjacent markets. Plasma is the 'fourth state of matter' and consists of ionised gas. Examples in nature include lightning strikes, the aurora and the sun, while historical technological applications include etching of silicon chips for smartphones, advanced space propulsion systems and controlled nuclear fusion reactors. The company founders, Dr Thomas Frame and Dr Thomas Harle, saw an opportunity to use their technological expertise in spacecraft systems engineering and applied plasma physics to address urgent terrestrial needs, such as antimicrobial resistance. The team has since developed and patented an innovative platform plasma technology, and developed the company's first product, Nebulaskin®, for non-surgical cosmetic procedures with a number of leading Harley Street clinics. A disruptive wound care product is currently in development. Dr Harle said, "Fourth State sees biofilm management and prevention as a future 'killer app' for plasma technology across a wide range of sectors, so it's fantastic to be working with NBIC to accelerate development and market access for the technology. Access to NBIC Proof of Concept funding has allowed us to build out our network, explore the expansion of our technology into further sectors and provide us with a deeper understanding of the science behind the interaction of plasma and biofilm". Dr Velliou said, "I find the broadness of the NBIC network and remit fascinating. It allows the conduction of so many different types of research on biofilms and enables academics to network with other relevant groups at both national and international level and encourages academics to work directly with industry to drive solutions to practical problems through fundamental research. This interaction is very valuable as we really see our research output accelerated from bench to every-day practice in industry".
Start Year 2019
 
Description NBIC POC 01POC18022 A novel laboratory biofilm model to accelerate the commercialisation of anti-biofilm products for the benefit of patients with chronic wounds (Esther Karunakaran) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of this project is to establish an innovative laboratory model of a human wound bed infected with biofilms. Biofilms of Pseudomonas aeruginosa and Staphylococcus aureus will be investigated as exemplar Gram negative and Gram positive biofilms respectively. The intention is to use this platform to provide companies designing anti-biofilm products with a relevant in vitro model to assess accurately the efficacy and safety of their formulations in the developmental stages. This will reduce the need for animal testing and improve success rates in clinical trials thereby accelerating the translation of these products to clinic for patient benefit. Two innovative interdisciplinary approaches driven by state-of-the-art scientific understanding of wound healing and advances in reactor engineering are built into the proposed human wound bed model which set it apart from current laboratory models for drug testing: 1. provision of a controlled hypoxic environment for human cell-biofilm interaction to simulate non-healing wound beds, and 2. moving away from batch testing procedures through application of microfluidics technology. Microfluidic technology is crucial for the model as it increases throughput, allows good control of the hypoxic environment and longer-term monitoring of interactions between human cells, biofilms and therapeutics by continuous removal of metabolic by-products. The explicit inclusion of biofilms at the human cell interface provides a further benefit over existing laboratory models which mostly involve animals or test biofilms on an abiotic surface. The potential for future developments to include 3D tissue engineering, models of other anatomical sites and polymicrobial biofilms are of commercial and academic interest. In the proposed project, success will be continuously assessed and measured by achievement of deliverables, timely progression according to Gantt chart and establishment of good working relationships between project partners to allow maximum exploitation of the findings generated. The project will take place in two work packages (WP). • WP1 is designed as a preliminary step to 1) obtain complementary efficacy data for the analogues provided by Neem against biofilms under hypoxia, 2) establish the experimental set up and measurement parameters in microfluidic channels. • In WP2, the biofilm-infected wound bed model will be established. Measurement of efficacy of biofilm disruption and preliminary data on the safety of the analogues will be obtained. The project will be managed in the University of Sheffield by the team comprising EK, PM and SM. Dr. Claudia Williams (CW) will manage the project in Neem Biotech. EK will be responsible for day-to-day management of the project. The entire team comprising CW, EK, PM, SM, and KH will meet monthly via teleconference to discuss findings and monitor project progress.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The project closely followed the original plan. Approximately 50% of these objectives were achieved. All objectives could not be completed in full because of time constraints and because two key operational challenges in the project could not be overcome in the timeframe of the project. • Identification of culture media that can support biofilms of P. aeruginosa and S. aureus whilst maintaining viability of epithelial cells in hypoxia. • Analogue molecules performed differently in our assays than expected. However, important advances were made in the project that will serve as a solid foundation for future work. Conclusions: 1. Equipment operating conditions to produce normoxia and hypoxia reliably was established. 2. An appropriate culture medium to co-culture human epithelial cells and bacteria was established i.e. DMEM+2% FBS. 3. Effects of hypoxia on growth and biofilm formation by P. aeruginosa PA01 in microtitre plates were unequivocally established i.e. biofilm formation under normoxia and hypoxia were equivalent despite a reduced growth rate in hypoxia. 4. Operating parameters to establish a rapid, confluent layer of HaCaT cells mimicking a wound bed was optimised in the microfluidic channels of the Bioflux 1000Z. IP was generated by the University of Sheffield as all the work on the Bioflux model and the MBEC assays were carried out in Sheffield. Feasibility of culturing biofilms under hypoxia in MBEC plates and co-culturing human epithelial cells and bacteria in the Bioflux has been demonstrated. The work flows developed are an excellent foundation to develop the infected wound bed model using the Bioflux microfluidic system. Future work: The main challenges in this work was the time constraint and, in retrospect, the ambitious nature of the project. We attempted to set up the biofilm-infected wound bed model and use the model to assay candidate compounds from Neem Biotech within a space of three months (0.5 FTE postdoctoral researcher over six months). Despite solid contribution by the postdoctoral researcher and our mindful resistance against tangents of academic interest, we could achieve only half of the original objectives. This emphasised to us the need for further developmental work before the model can be made available to industrial collaborators for testing of emerging antimicrobials. Therefore, we have converted the current project to a PhD project in the University of Sheffield and recruited a doctoral student to the project. We focussed the doctoral project on S. aureus given we could not address S. aureus in sufficient detail in this project. Moreover, from the initial data shared with us by Neem Biotech, we could see that Neem 1 and Neem 2 were more efficacious against biofilms of S. aureus compared to P. aeruginosa. The doctoral project would allow a greater length of time to troubleshoot and optimise operational challenges encountered in the project and allow sufficient time to develop a robust biofilm-infected chronic wound bed model. There is an appetite from both the University of Sheffield and Neem Biotech to continue our collaboration.
Start Year 2019
 
Description NBIC POC 01POC18022 A novel laboratory biofilm model to accelerate the commercialisation of anti-biofilm products for the benefit of patients with chronic wounds (Esther Karunakaran) 
Organisation Neem Biotech
Country United Kingdom 
Sector Private 
PI Contribution The aim of this project is to establish an innovative laboratory model of a human wound bed infected with biofilms. Biofilms of Pseudomonas aeruginosa and Staphylococcus aureus will be investigated as exemplar Gram negative and Gram positive biofilms respectively. The intention is to use this platform to provide companies designing anti-biofilm products with a relevant in vitro model to assess accurately the efficacy and safety of their formulations in the developmental stages. This will reduce the need for animal testing and improve success rates in clinical trials thereby accelerating the translation of these products to clinic for patient benefit. Two innovative interdisciplinary approaches driven by state-of-the-art scientific understanding of wound healing and advances in reactor engineering are built into the proposed human wound bed model which set it apart from current laboratory models for drug testing: 1. provision of a controlled hypoxic environment for human cell-biofilm interaction to simulate non-healing wound beds, and 2. moving away from batch testing procedures through application of microfluidics technology. Microfluidic technology is crucial for the model as it increases throughput, allows good control of the hypoxic environment and longer-term monitoring of interactions between human cells, biofilms and therapeutics by continuous removal of metabolic by-products. The explicit inclusion of biofilms at the human cell interface provides a further benefit over existing laboratory models which mostly involve animals or test biofilms on an abiotic surface. The potential for future developments to include 3D tissue engineering, models of other anatomical sites and polymicrobial biofilms are of commercial and academic interest. In the proposed project, success will be continuously assessed and measured by achievement of deliverables, timely progression according to Gantt chart and establishment of good working relationships between project partners to allow maximum exploitation of the findings generated. The project will take place in two work packages (WP). • WP1 is designed as a preliminary step to 1) obtain complementary efficacy data for the analogues provided by Neem against biofilms under hypoxia, 2) establish the experimental set up and measurement parameters in microfluidic channels. • In WP2, the biofilm-infected wound bed model will be established. Measurement of efficacy of biofilm disruption and preliminary data on the safety of the analogues will be obtained. The project will be managed in the University of Sheffield by the team comprising EK, PM and SM. Dr. Claudia Williams (CW) will manage the project in Neem Biotech. EK will be responsible for day-to-day management of the project. The entire team comprising CW, EK, PM, SM, and KH will meet monthly via teleconference to discuss findings and monitor project progress.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The project closely followed the original plan. Approximately 50% of these objectives were achieved. All objectives could not be completed in full because of time constraints and because two key operational challenges in the project could not be overcome in the timeframe of the project. • Identification of culture media that can support biofilms of P. aeruginosa and S. aureus whilst maintaining viability of epithelial cells in hypoxia. • Analogue molecules performed differently in our assays than expected. However, important advances were made in the project that will serve as a solid foundation for future work. Conclusions: 1. Equipment operating conditions to produce normoxia and hypoxia reliably was established. 2. An appropriate culture medium to co-culture human epithelial cells and bacteria was established i.e. DMEM+2% FBS. 3. Effects of hypoxia on growth and biofilm formation by P. aeruginosa PA01 in microtitre plates were unequivocally established i.e. biofilm formation under normoxia and hypoxia were equivalent despite a reduced growth rate in hypoxia. 4. Operating parameters to establish a rapid, confluent layer of HaCaT cells mimicking a wound bed was optimised in the microfluidic channels of the Bioflux 1000Z. IP was generated by the University of Sheffield as all the work on the Bioflux model and the MBEC assays were carried out in Sheffield. Feasibility of culturing biofilms under hypoxia in MBEC plates and co-culturing human epithelial cells and bacteria in the Bioflux has been demonstrated. The work flows developed are an excellent foundation to develop the infected wound bed model using the Bioflux microfluidic system. Future work: The main challenges in this work was the time constraint and, in retrospect, the ambitious nature of the project. We attempted to set up the biofilm-infected wound bed model and use the model to assay candidate compounds from Neem Biotech within a space of three months (0.5 FTE postdoctoral researcher over six months). Despite solid contribution by the postdoctoral researcher and our mindful resistance against tangents of academic interest, we could achieve only half of the original objectives. This emphasised to us the need for further developmental work before the model can be made available to industrial collaborators for testing of emerging antimicrobials. Therefore, we have converted the current project to a PhD project in the University of Sheffield and recruited a doctoral student to the project. We focussed the doctoral project on S. aureus given we could not address S. aureus in sufficient detail in this project. Moreover, from the initial data shared with us by Neem Biotech, we could see that Neem 1 and Neem 2 were more efficacious against biofilms of S. aureus compared to P. aeruginosa. The doctoral project would allow a greater length of time to troubleshoot and optimise operational challenges encountered in the project and allow sufficient time to develop a robust biofilm-infected chronic wound bed model. There is an appetite from both the University of Sheffield and Neem Biotech to continue our collaboration.
Start Year 2019
 
Description NBIC POC 01POC18022 A novel laboratory biofilm model to accelerate the commercialisation of anti-biofilm products for the benefit of patients with chronic wounds (Esther Karunakaran) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of this project is to establish an innovative laboratory model of a human wound bed infected with biofilms. Biofilms of Pseudomonas aeruginosa and Staphylococcus aureus will be investigated as exemplar Gram negative and Gram positive biofilms respectively. The intention is to use this platform to provide companies designing anti-biofilm products with a relevant in vitro model to assess accurately the efficacy and safety of their formulations in the developmental stages. This will reduce the need for animal testing and improve success rates in clinical trials thereby accelerating the translation of these products to clinic for patient benefit. Two innovative interdisciplinary approaches driven by state-of-the-art scientific understanding of wound healing and advances in reactor engineering are built into the proposed human wound bed model which set it apart from current laboratory models for drug testing: 1. provision of a controlled hypoxic environment for human cell-biofilm interaction to simulate non-healing wound beds, and 2. moving away from batch testing procedures through application of microfluidics technology. Microfluidic technology is crucial for the model as it increases throughput, allows good control of the hypoxic environment and longer-term monitoring of interactions between human cells, biofilms and therapeutics by continuous removal of metabolic by-products. The explicit inclusion of biofilms at the human cell interface provides a further benefit over existing laboratory models which mostly involve animals or test biofilms on an abiotic surface. The potential for future developments to include 3D tissue engineering, models of other anatomical sites and polymicrobial biofilms are of commercial and academic interest. In the proposed project, success will be continuously assessed and measured by achievement of deliverables, timely progression according to Gantt chart and establishment of good working relationships between project partners to allow maximum exploitation of the findings generated. The project will take place in two work packages (WP). • WP1 is designed as a preliminary step to 1) obtain complementary efficacy data for the analogues provided by Neem against biofilms under hypoxia, 2) establish the experimental set up and measurement parameters in microfluidic channels. • In WP2, the biofilm-infected wound bed model will be established. Measurement of efficacy of biofilm disruption and preliminary data on the safety of the analogues will be obtained. The project will be managed in the University of Sheffield by the team comprising EK, PM and SM. Dr. Claudia Williams (CW) will manage the project in Neem Biotech. EK will be responsible for day-to-day management of the project. The entire team comprising CW, EK, PM, SM, and KH will meet monthly via teleconference to discuss findings and monitor project progress.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The project closely followed the original plan. Approximately 50% of these objectives were achieved. All objectives could not be completed in full because of time constraints and because two key operational challenges in the project could not be overcome in the timeframe of the project. • Identification of culture media that can support biofilms of P. aeruginosa and S. aureus whilst maintaining viability of epithelial cells in hypoxia. • Analogue molecules performed differently in our assays than expected. However, important advances were made in the project that will serve as a solid foundation for future work. Conclusions: 1. Equipment operating conditions to produce normoxia and hypoxia reliably was established. 2. An appropriate culture medium to co-culture human epithelial cells and bacteria was established i.e. DMEM+2% FBS. 3. Effects of hypoxia on growth and biofilm formation by P. aeruginosa PA01 in microtitre plates were unequivocally established i.e. biofilm formation under normoxia and hypoxia were equivalent despite a reduced growth rate in hypoxia. 4. Operating parameters to establish a rapid, confluent layer of HaCaT cells mimicking a wound bed was optimised in the microfluidic channels of the Bioflux 1000Z. IP was generated by the University of Sheffield as all the work on the Bioflux model and the MBEC assays were carried out in Sheffield. Feasibility of culturing biofilms under hypoxia in MBEC plates and co-culturing human epithelial cells and bacteria in the Bioflux has been demonstrated. The work flows developed are an excellent foundation to develop the infected wound bed model using the Bioflux microfluidic system. Future work: The main challenges in this work was the time constraint and, in retrospect, the ambitious nature of the project. We attempted to set up the biofilm-infected wound bed model and use the model to assay candidate compounds from Neem Biotech within a space of three months (0.5 FTE postdoctoral researcher over six months). Despite solid contribution by the postdoctoral researcher and our mindful resistance against tangents of academic interest, we could achieve only half of the original objectives. This emphasised to us the need for further developmental work before the model can be made available to industrial collaborators for testing of emerging antimicrobials. Therefore, we have converted the current project to a PhD project in the University of Sheffield and recruited a doctoral student to the project. We focussed the doctoral project on S. aureus given we could not address S. aureus in sufficient detail in this project. Moreover, from the initial data shared with us by Neem Biotech, we could see that Neem 1 and Neem 2 were more efficacious against biofilms of S. aureus compared to P. aeruginosa. The doctoral project would allow a greater length of time to troubleshoot and optimise operational challenges encountered in the project and allow sufficient time to develop a robust biofilm-infected chronic wound bed model. There is an appetite from both the University of Sheffield and Neem Biotech to continue our collaboration.
Start Year 2019
 
Description NBIC POC 01POC18022 A novel laboratory biofilm model to accelerate the commercialisation of anti-biofilm products for the benefit of patients with chronic wounds (Esther Karunakaran) 
Organisation Welsh Wound Innovation Centre
Country United Kingdom 
Sector Private 
PI Contribution The aim of this project is to establish an innovative laboratory model of a human wound bed infected with biofilms. Biofilms of Pseudomonas aeruginosa and Staphylococcus aureus will be investigated as exemplar Gram negative and Gram positive biofilms respectively. The intention is to use this platform to provide companies designing anti-biofilm products with a relevant in vitro model to assess accurately the efficacy and safety of their formulations in the developmental stages. This will reduce the need for animal testing and improve success rates in clinical trials thereby accelerating the translation of these products to clinic for patient benefit. Two innovative interdisciplinary approaches driven by state-of-the-art scientific understanding of wound healing and advances in reactor engineering are built into the proposed human wound bed model which set it apart from current laboratory models for drug testing: 1. provision of a controlled hypoxic environment for human cell-biofilm interaction to simulate non-healing wound beds, and 2. moving away from batch testing procedures through application of microfluidics technology. Microfluidic technology is crucial for the model as it increases throughput, allows good control of the hypoxic environment and longer-term monitoring of interactions between human cells, biofilms and therapeutics by continuous removal of metabolic by-products. The explicit inclusion of biofilms at the human cell interface provides a further benefit over existing laboratory models which mostly involve animals or test biofilms on an abiotic surface. The potential for future developments to include 3D tissue engineering, models of other anatomical sites and polymicrobial biofilms are of commercial and academic interest. In the proposed project, success will be continuously assessed and measured by achievement of deliverables, timely progression according to Gantt chart and establishment of good working relationships between project partners to allow maximum exploitation of the findings generated. The project will take place in two work packages (WP). • WP1 is designed as a preliminary step to 1) obtain complementary efficacy data for the analogues provided by Neem against biofilms under hypoxia, 2) establish the experimental set up and measurement parameters in microfluidic channels. • In WP2, the biofilm-infected wound bed model will be established. Measurement of efficacy of biofilm disruption and preliminary data on the safety of the analogues will be obtained. The project will be managed in the University of Sheffield by the team comprising EK, PM and SM. Dr. Claudia Williams (CW) will manage the project in Neem Biotech. EK will be responsible for day-to-day management of the project. The entire team comprising CW, EK, PM, SM, and KH will meet monthly via teleconference to discuss findings and monitor project progress.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The project closely followed the original plan. Approximately 50% of these objectives were achieved. All objectives could not be completed in full because of time constraints and because two key operational challenges in the project could not be overcome in the timeframe of the project. • Identification of culture media that can support biofilms of P. aeruginosa and S. aureus whilst maintaining viability of epithelial cells in hypoxia. • Analogue molecules performed differently in our assays than expected. However, important advances were made in the project that will serve as a solid foundation for future work. Conclusions: 1. Equipment operating conditions to produce normoxia and hypoxia reliably was established. 2. An appropriate culture medium to co-culture human epithelial cells and bacteria was established i.e. DMEM+2% FBS. 3. Effects of hypoxia on growth and biofilm formation by P. aeruginosa PA01 in microtitre plates were unequivocally established i.e. biofilm formation under normoxia and hypoxia were equivalent despite a reduced growth rate in hypoxia. 4. Operating parameters to establish a rapid, confluent layer of HaCaT cells mimicking a wound bed was optimised in the microfluidic channels of the Bioflux 1000Z. IP was generated by the University of Sheffield as all the work on the Bioflux model and the MBEC assays were carried out in Sheffield. Feasibility of culturing biofilms under hypoxia in MBEC plates and co-culturing human epithelial cells and bacteria in the Bioflux has been demonstrated. The work flows developed are an excellent foundation to develop the infected wound bed model using the Bioflux microfluidic system. Future work: The main challenges in this work was the time constraint and, in retrospect, the ambitious nature of the project. We attempted to set up the biofilm-infected wound bed model and use the model to assay candidate compounds from Neem Biotech within a space of three months (0.5 FTE postdoctoral researcher over six months). Despite solid contribution by the postdoctoral researcher and our mindful resistance against tangents of academic interest, we could achieve only half of the original objectives. This emphasised to us the need for further developmental work before the model can be made available to industrial collaborators for testing of emerging antimicrobials. Therefore, we have converted the current project to a PhD project in the University of Sheffield and recruited a doctoral student to the project. We focussed the doctoral project on S. aureus given we could not address S. aureus in sufficient detail in this project. Moreover, from the initial data shared with us by Neem Biotech, we could see that Neem 1 and Neem 2 were more efficacious against biofilms of S. aureus compared to P. aeruginosa. The doctoral project would allow a greater length of time to troubleshoot and optimise operational challenges encountered in the project and allow sufficient time to develop a robust biofilm-infected chronic wound bed model. There is an appetite from both the University of Sheffield and Neem Biotech to continue our collaboration.
Start Year 2019
 
Description NBIC POC 01POC18026 BIOFILMer: a super-resolution platform for the analysis of crystalline biofilms in urological devices (Dario Carugo) 
Organisation Montana State University
Country United States 
Sector Academic/University 
PI Contribution The overall aim of this project is to establish a benchtop super-resolution platform for the dynamic analysis of crystalline biofilms in endourological devices. The BIOFILMer technology will build upon established expertise, research advances, and intellectual property (IP) in the fields of super-resolution microscopy (Oxford Nanoimaging Ltd), modelling and manufacturing of endourological devices (University of Southampton), and detection and analysis of crystalline biofilms (Center for Biofilm Engineering). By the end of the project, we will demonstrate the feasibility of: I. Integrating disposable microfluidic (cartridge-like) models of urological devices (µFluidic Unit) with a compact and automated single-molecule imaging system (µScope Unit); II. Imaging single molecules or molecular aggregates, individual bacterial cells, and bacterial biofilms, at regions of interest within the µFluidic models; and III. 'Live' processing of microscope images to temporally resolve the spatial dynamics of molecules involved in bacterial adhesion and crystal formation (e.g., chondroitin sulfate, heparin sulfate, bacterial lipopolysaccharides), track individual bacterial cells and sub-cellular virulence markers, and determine the conformation of formed crystalline biofilms. Success of deliverables (i)-(iii) will lead to the establishment of the first high-throughput technology to analyse initiation, promotion, and progression of crystalline biofilms in urological devices. Such a platform will enable the identification of primary determinants governing the failure of endourological devices, thus allowing biofilms prevention through optimisation of devices' design, constitutive materials, and surface coatings. It is envisaged that the developed platform will have significant potential for translation into research and development (R&D) and clinical laboratories (see Expression of Interest letters attached to this application).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: The research in this proof-of-concept project led to the development of a microscope-compatible microfluidic platform for evaluating the attachment of bacterial cells onto urological stents. It was demonstrated that devices could be designed to fit with a benchtop super-resolution microscope and rapidly prototyped using 3D printing technology. Devices could also be operated in such a way to replicate flow dynamic conditions that are relevant to urological applications, with the potential to inform the development of safer and more efficacious interventions. In the present project, we designed and manufactured microscope-compatible microfluidic-based models (referred to as stent-on-a-chip, SoC) to investigate the initiation of bacterial attachment in the stented and occluded ureter. Through a combination of computational fluid dynamic (CFD) simulations and experiments, our findings may suggest that one of the factors governing bacterial attachment in the stented ureter is the presence of cavity flow in areas located in the proximity of a ureteral obstruction. Cavity flow originates in the region located between a complete occlusion of the ureter lumen and one or more stent side-holes, and is characterised by low WSS levels (WSS << 40 mPa) and the formation of low-velocity laminar vortices. The combination of these conditions may promote attachment of bacterial cells present in urine. The developed designs could thus be employed in future work to further optimise the design of urological devices to reduce to occurrence of device-associated infections. Future work: • The project has already led to a peer-reviewed journal article (https://doi.org/10.3390/mi11040408). • The project has consolidated the collaboration between the project's PI (Dario Carugo, DC) and ONI. Notably, DC, ONI, and NBIC are investigators and/or partners in the recently awarded EPSRC Programme Grant "Beyond Antibiotics" (EP/V026623/1). • DC is co-I in a successful NIHR i4i clinical trial on an innovative ureteric stent design. • Ongoing research is focusing on the use of the developed microfluidic platforms to evaluate innovative layer-by-layer surface coatings, as well as geometrical changes to the stent's design, on the formation of bacterial biofilms.
Start Year 2018
 
Description NBIC POC 01POC18026 BIOFILMer: a super-resolution platform for the analysis of crystalline biofilms in urological devices (Dario Carugo) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall aim of this project is to establish a benchtop super-resolution platform for the dynamic analysis of crystalline biofilms in endourological devices. The BIOFILMer technology will build upon established expertise, research advances, and intellectual property (IP) in the fields of super-resolution microscopy (Oxford Nanoimaging Ltd), modelling and manufacturing of endourological devices (University of Southampton), and detection and analysis of crystalline biofilms (Center for Biofilm Engineering). By the end of the project, we will demonstrate the feasibility of: I. Integrating disposable microfluidic (cartridge-like) models of urological devices (µFluidic Unit) with a compact and automated single-molecule imaging system (µScope Unit); II. Imaging single molecules or molecular aggregates, individual bacterial cells, and bacterial biofilms, at regions of interest within the µFluidic models; and III. 'Live' processing of microscope images to temporally resolve the spatial dynamics of molecules involved in bacterial adhesion and crystal formation (e.g., chondroitin sulfate, heparin sulfate, bacterial lipopolysaccharides), track individual bacterial cells and sub-cellular virulence markers, and determine the conformation of formed crystalline biofilms. Success of deliverables (i)-(iii) will lead to the establishment of the first high-throughput technology to analyse initiation, promotion, and progression of crystalline biofilms in urological devices. Such a platform will enable the identification of primary determinants governing the failure of endourological devices, thus allowing biofilms prevention through optimisation of devices' design, constitutive materials, and surface coatings. It is envisaged that the developed platform will have significant potential for translation into research and development (R&D) and clinical laboratories (see Expression of Interest letters attached to this application).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: The research in this proof-of-concept project led to the development of a microscope-compatible microfluidic platform for evaluating the attachment of bacterial cells onto urological stents. It was demonstrated that devices could be designed to fit with a benchtop super-resolution microscope and rapidly prototyped using 3D printing technology. Devices could also be operated in such a way to replicate flow dynamic conditions that are relevant to urological applications, with the potential to inform the development of safer and more efficacious interventions. In the present project, we designed and manufactured microscope-compatible microfluidic-based models (referred to as stent-on-a-chip, SoC) to investigate the initiation of bacterial attachment in the stented and occluded ureter. Through a combination of computational fluid dynamic (CFD) simulations and experiments, our findings may suggest that one of the factors governing bacterial attachment in the stented ureter is the presence of cavity flow in areas located in the proximity of a ureteral obstruction. Cavity flow originates in the region located between a complete occlusion of the ureter lumen and one or more stent side-holes, and is characterised by low WSS levels (WSS << 40 mPa) and the formation of low-velocity laminar vortices. The combination of these conditions may promote attachment of bacterial cells present in urine. The developed designs could thus be employed in future work to further optimise the design of urological devices to reduce to occurrence of device-associated infections. Future work: • The project has already led to a peer-reviewed journal article (https://doi.org/10.3390/mi11040408). • The project has consolidated the collaboration between the project's PI (Dario Carugo, DC) and ONI. Notably, DC, ONI, and NBIC are investigators and/or partners in the recently awarded EPSRC Programme Grant "Beyond Antibiotics" (EP/V026623/1). • DC is co-I in a successful NIHR i4i clinical trial on an innovative ureteric stent design. • Ongoing research is focusing on the use of the developed microfluidic platforms to evaluate innovative layer-by-layer surface coatings, as well as geometrical changes to the stent's design, on the formation of bacterial biofilms.
Start Year 2018
 
Description NBIC POC 01POC18026 BIOFILMer: a super-resolution platform for the analysis of crystalline biofilms in urological devices (Dario Carugo) 
Organisation Oxford Nanoimaging
Country United Kingdom 
Sector Private 
PI Contribution The overall aim of this project is to establish a benchtop super-resolution platform for the dynamic analysis of crystalline biofilms in endourological devices. The BIOFILMer technology will build upon established expertise, research advances, and intellectual property (IP) in the fields of super-resolution microscopy (Oxford Nanoimaging Ltd), modelling and manufacturing of endourological devices (University of Southampton), and detection and analysis of crystalline biofilms (Center for Biofilm Engineering). By the end of the project, we will demonstrate the feasibility of: I. Integrating disposable microfluidic (cartridge-like) models of urological devices (µFluidic Unit) with a compact and automated single-molecule imaging system (µScope Unit); II. Imaging single molecules or molecular aggregates, individual bacterial cells, and bacterial biofilms, at regions of interest within the µFluidic models; and III. 'Live' processing of microscope images to temporally resolve the spatial dynamics of molecules involved in bacterial adhesion and crystal formation (e.g., chondroitin sulfate, heparin sulfate, bacterial lipopolysaccharides), track individual bacterial cells and sub-cellular virulence markers, and determine the conformation of formed crystalline biofilms. Success of deliverables (i)-(iii) will lead to the establishment of the first high-throughput technology to analyse initiation, promotion, and progression of crystalline biofilms in urological devices. Such a platform will enable the identification of primary determinants governing the failure of endourological devices, thus allowing biofilms prevention through optimisation of devices' design, constitutive materials, and surface coatings. It is envisaged that the developed platform will have significant potential for translation into research and development (R&D) and clinical laboratories (see Expression of Interest letters attached to this application).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: The research in this proof-of-concept project led to the development of a microscope-compatible microfluidic platform for evaluating the attachment of bacterial cells onto urological stents. It was demonstrated that devices could be designed to fit with a benchtop super-resolution microscope and rapidly prototyped using 3D printing technology. Devices could also be operated in such a way to replicate flow dynamic conditions that are relevant to urological applications, with the potential to inform the development of safer and more efficacious interventions. In the present project, we designed and manufactured microscope-compatible microfluidic-based models (referred to as stent-on-a-chip, SoC) to investigate the initiation of bacterial attachment in the stented and occluded ureter. Through a combination of computational fluid dynamic (CFD) simulations and experiments, our findings may suggest that one of the factors governing bacterial attachment in the stented ureter is the presence of cavity flow in areas located in the proximity of a ureteral obstruction. Cavity flow originates in the region located between a complete occlusion of the ureter lumen and one or more stent side-holes, and is characterised by low WSS levels (WSS << 40 mPa) and the formation of low-velocity laminar vortices. The combination of these conditions may promote attachment of bacterial cells present in urine. The developed designs could thus be employed in future work to further optimise the design of urological devices to reduce to occurrence of device-associated infections. Future work: • The project has already led to a peer-reviewed journal article (https://doi.org/10.3390/mi11040408). • The project has consolidated the collaboration between the project's PI (Dario Carugo, DC) and ONI. Notably, DC, ONI, and NBIC are investigators and/or partners in the recently awarded EPSRC Programme Grant "Beyond Antibiotics" (EP/V026623/1). • DC is co-I in a successful NIHR i4i clinical trial on an innovative ureteric stent design. • Ongoing research is focusing on the use of the developed microfluidic platforms to evaluate innovative layer-by-layer surface coatings, as well as geometrical changes to the stent's design, on the formation of bacterial biofilms.
Start Year 2018
 
Description NBIC POC 01POC18026 BIOFILMer: a super-resolution platform for the analysis of crystalline biofilms in urological devices (Dario Carugo) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall aim of this project is to establish a benchtop super-resolution platform for the dynamic analysis of crystalline biofilms in endourological devices. The BIOFILMer technology will build upon established expertise, research advances, and intellectual property (IP) in the fields of super-resolution microscopy (Oxford Nanoimaging Ltd), modelling and manufacturing of endourological devices (University of Southampton), and detection and analysis of crystalline biofilms (Center for Biofilm Engineering). By the end of the project, we will demonstrate the feasibility of: I. Integrating disposable microfluidic (cartridge-like) models of urological devices (µFluidic Unit) with a compact and automated single-molecule imaging system (µScope Unit); II. Imaging single molecules or molecular aggregates, individual bacterial cells, and bacterial biofilms, at regions of interest within the µFluidic models; and III. 'Live' processing of microscope images to temporally resolve the spatial dynamics of molecules involved in bacterial adhesion and crystal formation (e.g., chondroitin sulfate, heparin sulfate, bacterial lipopolysaccharides), track individual bacterial cells and sub-cellular virulence markers, and determine the conformation of formed crystalline biofilms. Success of deliverables (i)-(iii) will lead to the establishment of the first high-throughput technology to analyse initiation, promotion, and progression of crystalline biofilms in urological devices. Such a platform will enable the identification of primary determinants governing the failure of endourological devices, thus allowing biofilms prevention through optimisation of devices' design, constitutive materials, and surface coatings. It is envisaged that the developed platform will have significant potential for translation into research and development (R&D) and clinical laboratories (see Expression of Interest letters attached to this application).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: The research in this proof-of-concept project led to the development of a microscope-compatible microfluidic platform for evaluating the attachment of bacterial cells onto urological stents. It was demonstrated that devices could be designed to fit with a benchtop super-resolution microscope and rapidly prototyped using 3D printing technology. Devices could also be operated in such a way to replicate flow dynamic conditions that are relevant to urological applications, with the potential to inform the development of safer and more efficacious interventions. In the present project, we designed and manufactured microscope-compatible microfluidic-based models (referred to as stent-on-a-chip, SoC) to investigate the initiation of bacterial attachment in the stented and occluded ureter. Through a combination of computational fluid dynamic (CFD) simulations and experiments, our findings may suggest that one of the factors governing bacterial attachment in the stented ureter is the presence of cavity flow in areas located in the proximity of a ureteral obstruction. Cavity flow originates in the region located between a complete occlusion of the ureter lumen and one or more stent side-holes, and is characterised by low WSS levels (WSS << 40 mPa) and the formation of low-velocity laminar vortices. The combination of these conditions may promote attachment of bacterial cells present in urine. The developed designs could thus be employed in future work to further optimise the design of urological devices to reduce to occurrence of device-associated infections. Future work: • The project has already led to a peer-reviewed journal article (https://doi.org/10.3390/mi11040408). • The project has consolidated the collaboration between the project's PI (Dario Carugo, DC) and ONI. Notably, DC, ONI, and NBIC are investigators and/or partners in the recently awarded EPSRC Programme Grant "Beyond Antibiotics" (EP/V026623/1). • DC is co-I in a successful NIHR i4i clinical trial on an innovative ureteric stent design. • Ongoing research is focusing on the use of the developed microfluidic platforms to evaluate innovative layer-by-layer surface coatings, as well as geometrical changes to the stent's design, on the formation of bacterial biofilms.
Start Year 2018
 
Description NBIC POC 01POC18027 QuorumClean (Karen Tait) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall aim of the project is to demonstrate the proof of concept of a novel biofilm prevention coating for marine applications. The novel approach uses bioderived lactams to disrupt quorum sensing during biofilm growth. This has the potential to reduce biofilm formation in the first instance, but also to interrupt the communication process that occurs between biofilms and higher fouling organisms during later stages of fouling. The result is a targeted antifouling solution that does not involve the use of broad spectrum biocides (i.e. not toxic or harmful to non-target organisms), yet is still capable of working across a wide range of operational profiles. We will conduct a range of tests that will investigate the efficacy of the approach against different fouling challenges. We will also investigate the efficacy of the technology when delivered to a surface using a variety of carriers. This approach will allow Unilever to understand how to target the technology towards the most appropriate areas of the marine sector, which is diverse and has many different performance requirements. For example, antifouling technology for defence applications is typically required to perform to a high standard, but for relatively short periods of time (weeks or months) whereas commercial shipping generally requires lower performance, but for 5-7 years. The proposed work will allow Unilever to produce an effective development and marketing strategy to position the technology within the marine sector. For us, the measure of project success is based on three aspects: Generation of convincing proof of concept data that will build on promising preliminary work already completed, and provide confidence for further investment. A clear understanding of the most promising areas within the marine sector to target with the technology. Support further development required to achieve market penetration within target markets.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The measure of project success was based on three aspects: 1. Generation of convincing proof of concept data that will build on promising preliminary work already completed, and provide confidence for further investment - ACHIEVED 2. A clear understanding of the most promising areas within the marine sector to target with the technology - ACHIEVED (with more targeted work to be done in optimisation and mechanistic understanding) 3. Support further development required to achieve market penetration within target markets - ACHIEVED (for some marine applications via Penrhos Bio Ltd) All milestones and tasks were achieved to a very high standard with great scientific integrity and very effective communication. The partnership between PML Applications Ltd and Unilever provided a wide range of matrix types and assay methodologies available to investigate marine antifouling performance of novel technologies. These novel anti-fouling technologies were successfully incorporated into a wide range of formulation matrices and formats applicable to various marine applications (below and above the water-line). Proof of principle demonstration of efficacy (in vitro) was demonstrated, against a wide range of marine microflora (bacteria and algae), which allowed for the selection of samples to be challenged using in-field appraisal methodology. There was clear bio-efficacy being delivered form the technology, at micromolar levels. However, incorporating into some of the current commercially available marine coatings did not improve the anti-fouling performance of the base. It should be noted that none of the systems/ formulations were particularly optimised, therefore, a key next step is to define the best routes to incorporate into relevant marine coatings and determine stability information and robustness of coating once applied. We will be investigating the leaching properties of the material, under dynamic conditions to obtain further mechanistic insights. We would then look to work with PML again to conduct further in-filed trials. This project had demonstrated lactams have a significant inhibitory effect on algal growth at very low, micromolar, concentrations, and can completely inhibiting the growth of P. tricornutum. When these lactams were included in coating formulations, their effectiveness was reduced or masked by the characteristics of the coating. However, in some exceptions, significant improvements were observed when lactams were added to coatings. These improvements were seen in three different assays (natural marine biofilms; algal biofilms; Ulva sp zoospore settlement). However, it should be noted that in the majority of instances in these assays, the addition of a lactam did not lead to an improvement in antifouling performance. Finally, long-term tests at Millbay marina did not show any improvements in anti-fouling performance when lactams were added. While these compounds clearly have potential in anti-fouling formulations, further development, is needed to realise their full potential. Data will be used to exemplify, and support recently filed patents re: anti-algal benefits.
Start Year 2019
 
Description NBIC POC 01POC18027 QuorumClean (Karen Tait) 
Organisation Plymouth Marine Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall aim of the project is to demonstrate the proof of concept of a novel biofilm prevention coating for marine applications. The novel approach uses bioderived lactams to disrupt quorum sensing during biofilm growth. This has the potential to reduce biofilm formation in the first instance, but also to interrupt the communication process that occurs between biofilms and higher fouling organisms during later stages of fouling. The result is a targeted antifouling solution that does not involve the use of broad spectrum biocides (i.e. not toxic or harmful to non-target organisms), yet is still capable of working across a wide range of operational profiles. We will conduct a range of tests that will investigate the efficacy of the approach against different fouling challenges. We will also investigate the efficacy of the technology when delivered to a surface using a variety of carriers. This approach will allow Unilever to understand how to target the technology towards the most appropriate areas of the marine sector, which is diverse and has many different performance requirements. For example, antifouling technology for defence applications is typically required to perform to a high standard, but for relatively short periods of time (weeks or months) whereas commercial shipping generally requires lower performance, but for 5-7 years. The proposed work will allow Unilever to produce an effective development and marketing strategy to position the technology within the marine sector. For us, the measure of project success is based on three aspects: Generation of convincing proof of concept data that will build on promising preliminary work already completed, and provide confidence for further investment. A clear understanding of the most promising areas within the marine sector to target with the technology. Support further development required to achieve market penetration within target markets.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The measure of project success was based on three aspects: 1. Generation of convincing proof of concept data that will build on promising preliminary work already completed, and provide confidence for further investment - ACHIEVED 2. A clear understanding of the most promising areas within the marine sector to target with the technology - ACHIEVED (with more targeted work to be done in optimisation and mechanistic understanding) 3. Support further development required to achieve market penetration within target markets - ACHIEVED (for some marine applications via Penrhos Bio Ltd) All milestones and tasks were achieved to a very high standard with great scientific integrity and very effective communication. The partnership between PML Applications Ltd and Unilever provided a wide range of matrix types and assay methodologies available to investigate marine antifouling performance of novel technologies. These novel anti-fouling technologies were successfully incorporated into a wide range of formulation matrices and formats applicable to various marine applications (below and above the water-line). Proof of principle demonstration of efficacy (in vitro) was demonstrated, against a wide range of marine microflora (bacteria and algae), which allowed for the selection of samples to be challenged using in-field appraisal methodology. There was clear bio-efficacy being delivered form the technology, at micromolar levels. However, incorporating into some of the current commercially available marine coatings did not improve the anti-fouling performance of the base. It should be noted that none of the systems/ formulations were particularly optimised, therefore, a key next step is to define the best routes to incorporate into relevant marine coatings and determine stability information and robustness of coating once applied. We will be investigating the leaching properties of the material, under dynamic conditions to obtain further mechanistic insights. We would then look to work with PML again to conduct further in-filed trials. This project had demonstrated lactams have a significant inhibitory effect on algal growth at very low, micromolar, concentrations, and can completely inhibiting the growth of P. tricornutum. When these lactams were included in coating formulations, their effectiveness was reduced or masked by the characteristics of the coating. However, in some exceptions, significant improvements were observed when lactams were added to coatings. These improvements were seen in three different assays (natural marine biofilms; algal biofilms; Ulva sp zoospore settlement). However, it should be noted that in the majority of instances in these assays, the addition of a lactam did not lead to an improvement in antifouling performance. Finally, long-term tests at Millbay marina did not show any improvements in anti-fouling performance when lactams were added. While these compounds clearly have potential in anti-fouling formulations, further development, is needed to realise their full potential. Data will be used to exemplify, and support recently filed patents re: anti-algal benefits.
Start Year 2019
 
Description NBIC POC 01POC18027 QuorumClean (Karen Tait) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution The overall aim of the project is to demonstrate the proof of concept of a novel biofilm prevention coating for marine applications. The novel approach uses bioderived lactams to disrupt quorum sensing during biofilm growth. This has the potential to reduce biofilm formation in the first instance, but also to interrupt the communication process that occurs between biofilms and higher fouling organisms during later stages of fouling. The result is a targeted antifouling solution that does not involve the use of broad spectrum biocides (i.e. not toxic or harmful to non-target organisms), yet is still capable of working across a wide range of operational profiles. We will conduct a range of tests that will investigate the efficacy of the approach against different fouling challenges. We will also investigate the efficacy of the technology when delivered to a surface using a variety of carriers. This approach will allow Unilever to understand how to target the technology towards the most appropriate areas of the marine sector, which is diverse and has many different performance requirements. For example, antifouling technology for defence applications is typically required to perform to a high standard, but for relatively short periods of time (weeks or months) whereas commercial shipping generally requires lower performance, but for 5-7 years. The proposed work will allow Unilever to produce an effective development and marketing strategy to position the technology within the marine sector. For us, the measure of project success is based on three aspects: Generation of convincing proof of concept data that will build on promising preliminary work already completed, and provide confidence for further investment. A clear understanding of the most promising areas within the marine sector to target with the technology. Support further development required to achieve market penetration within target markets.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The measure of project success was based on three aspects: 1. Generation of convincing proof of concept data that will build on promising preliminary work already completed, and provide confidence for further investment - ACHIEVED 2. A clear understanding of the most promising areas within the marine sector to target with the technology - ACHIEVED (with more targeted work to be done in optimisation and mechanistic understanding) 3. Support further development required to achieve market penetration within target markets - ACHIEVED (for some marine applications via Penrhos Bio Ltd) All milestones and tasks were achieved to a very high standard with great scientific integrity and very effective communication. The partnership between PML Applications Ltd and Unilever provided a wide range of matrix types and assay methodologies available to investigate marine antifouling performance of novel technologies. These novel anti-fouling technologies were successfully incorporated into a wide range of formulation matrices and formats applicable to various marine applications (below and above the water-line). Proof of principle demonstration of efficacy (in vitro) was demonstrated, against a wide range of marine microflora (bacteria and algae), which allowed for the selection of samples to be challenged using in-field appraisal methodology. There was clear bio-efficacy being delivered form the technology, at micromolar levels. However, incorporating into some of the current commercially available marine coatings did not improve the anti-fouling performance of the base. It should be noted that none of the systems/ formulations were particularly optimised, therefore, a key next step is to define the best routes to incorporate into relevant marine coatings and determine stability information and robustness of coating once applied. We will be investigating the leaching properties of the material, under dynamic conditions to obtain further mechanistic insights. We would then look to work with PML again to conduct further in-filed trials. This project had demonstrated lactams have a significant inhibitory effect on algal growth at very low, micromolar, concentrations, and can completely inhibiting the growth of P. tricornutum. When these lactams were included in coating formulations, their effectiveness was reduced or masked by the characteristics of the coating. However, in some exceptions, significant improvements were observed when lactams were added to coatings. These improvements were seen in three different assays (natural marine biofilms; algal biofilms; Ulva sp zoospore settlement). However, it should be noted that in the majority of instances in these assays, the addition of a lactam did not lead to an improvement in antifouling performance. Finally, long-term tests at Millbay marina did not show any improvements in anti-fouling performance when lactams were added. While these compounds clearly have potential in anti-fouling formulations, further development, is needed to realise their full potential. Data will be used to exemplify, and support recently filed patents re: anti-algal benefits.
Start Year 2019
 
Description NBIC POC 01POC18029 Corneal biofilm models and anti-biofilm nanoparticles (Peter Monk) 
Organisation Blueberry Therapeutics
Country United Kingdom 
Sector Private 
PI Contribution In established eye infections, biofilms often form and are difficult to treat with conventional antibiotics or antifungals, a problem exacerbated by the rise of antimicrobial resistance in a wide range of organisms. In this application, we intend to exploit in vitro models of biofilm formation in human corneal cells and porcine corneal explants to determine the efficacy of a series of nanoparticle formulations of antimicrobial drugs on developing and mature biofilms. Such formulations are predicted to enhance efficacy through the disruption of biofilms and improved drug retention in the eye. A simple corneal epithelial cell monolayer assay will allow us to study microbial adhesion and the microcolony formation that precedes the biofilm. Drugs acting at this stage might inhibit adhesion, bacterial cell-cell communication or extracellular polymeric substance production in addition to direct effects on growth and viability. Success here will be measured as the recording of microcolony formation over 24h using microscopy, flow cytometry and fluorescence spectroscopy in the presence and absence of the test compounds. To further assess the most promising formulations, a more sophisticated corneal explant culture system will be used for longer term (48-72h) infection that should allow mature biofilm formation and the penetration of the microbes into deeper layers of the corneum. Success here will be determined as the establishment of infections using a range of clinically relevant bacterial and fungal pathogens, recorded using confocal microscopy, Raman spectroscopy and flow cytometry. The efficacy of compounds on the developing and established biofilms will be recorded using viability assays and microbial colony forming unit counts. The pathogens to be studied will be clinical isolates from Dr Prashant Garg at LV Prasad Eye Institute, Hyderabad: Gram positive bacteria (Staphylococcus aureus), Gram negative (Pseudomonas aeruginosa) and fungal (Candida albicans).
Collaborator Contribution University of Sheffield: Supply of porcine corneal infection models; supply of clinical isolates of microbial keratitis pathogens; supply of expertise in the design and interpretation of infection experiments. Tecrea Ltd: Supply of nanoparticle materials and antibiotics; supply of fungal pathogens; supply of expertise in the use of fungal pathogens in ex vivo models.
Impact Feedback from PML: The porcine corneal model has been successfully tested and the technique passed on to Tecrea for future use. We observed bacterial but not fungal biofilms that formed within 6 hours of infection. Tissue integrity was observed for at least 36 hrs. The formulation of antibiotics with nanocin enhances activity. The technique for successfully infecting porcine corneas was developed at the University of Sheffield. The technique was transferred to Tecrea, with training of a researcher in Sheffield and the supply of a number of the glass rings required to contain the pathogen. Knowledge about the use of fungal pathogens was supplied by Tecrea to the University of Sheffield. We intend to publish the data obtained in the P. aeruginosa infection assays, although the data with the formulations will not be used. The fungal infections will be continued at Tecrea and will also be published in due course. The corneal opacity secondary measure will be further analysed. At the very least, it should provide a striking visual indicator of antibiotic activity. The use of Nanocin to penetrate biofilms may be further developed. Successful application for NBIC funding in POC2. MRC grant application pending feedback. Working with industry partners Blueberry and Tecrea has been a very good experience, with free exchange of ideas on both sides. An iCASE PhD student supported by Blueberry, visited Sheffield for 4 weeks and learned the porcine cornea infection method. In return, she supplied us with new fungal strains and training on their growth. Feedback from both industrial collaborators: Both companies happy with efficacy of their actives, model and tech-transfer and in particular the Studentship. Blueberry: Blueberry may pursue product development and IP once PhD published - November 2021. Blueberry to take the technology to India (clinical work) or product development after PhD finished (November 2021). Tecrea: Established tolerability, efficacy of the compounds in an ex-vivo study and use of the model (tech transfer to their lab). We have some formulations and approach which we think has some potential in treating eye infections. In terms of research, the benefit was that we got some evidence about the tolerability of the formulations, the eye infection model and the some evidence about the efficacy. We got some confidence the model was valid and that the model could be used. We went into it having read about the model but we hadn't sort of experienced it directly. A good outcome. With drug development, it's a long process. A lot went into developing these formulations and we've done a lot of in vitro antimicrobial work on it. This was the next step - an ex vivo evaluation, further building confidence in the project. The next step would probably be for us to go to an animal model, to build confidence further because we did not see any problems in the ex-vivo model (which is a good sign, though there could be other inflammatory reactions that we need to look out for). And then you would start a clinical programme - the worst case scenario could five years and a billion dollars. In this case, we think it can go faster because of the nature of the formulations are easier.
Start Year 2019
 
Description NBIC POC 01POC18029 Corneal biofilm models and anti-biofilm nanoparticles (Peter Monk) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution In established eye infections, biofilms often form and are difficult to treat with conventional antibiotics or antifungals, a problem exacerbated by the rise of antimicrobial resistance in a wide range of organisms. In this application, we intend to exploit in vitro models of biofilm formation in human corneal cells and porcine corneal explants to determine the efficacy of a series of nanoparticle formulations of antimicrobial drugs on developing and mature biofilms. Such formulations are predicted to enhance efficacy through the disruption of biofilms and improved drug retention in the eye. A simple corneal epithelial cell monolayer assay will allow us to study microbial adhesion and the microcolony formation that precedes the biofilm. Drugs acting at this stage might inhibit adhesion, bacterial cell-cell communication or extracellular polymeric substance production in addition to direct effects on growth and viability. Success here will be measured as the recording of microcolony formation over 24h using microscopy, flow cytometry and fluorescence spectroscopy in the presence and absence of the test compounds. To further assess the most promising formulations, a more sophisticated corneal explant culture system will be used for longer term (48-72h) infection that should allow mature biofilm formation and the penetration of the microbes into deeper layers of the corneum. Success here will be determined as the establishment of infections using a range of clinically relevant bacterial and fungal pathogens, recorded using confocal microscopy, Raman spectroscopy and flow cytometry. The efficacy of compounds on the developing and established biofilms will be recorded using viability assays and microbial colony forming unit counts. The pathogens to be studied will be clinical isolates from Dr Prashant Garg at LV Prasad Eye Institute, Hyderabad: Gram positive bacteria (Staphylococcus aureus), Gram negative (Pseudomonas aeruginosa) and fungal (Candida albicans).
Collaborator Contribution University of Sheffield: Supply of porcine corneal infection models; supply of clinical isolates of microbial keratitis pathogens; supply of expertise in the design and interpretation of infection experiments. Tecrea Ltd: Supply of nanoparticle materials and antibiotics; supply of fungal pathogens; supply of expertise in the use of fungal pathogens in ex vivo models.
Impact Feedback from PML: The porcine corneal model has been successfully tested and the technique passed on to Tecrea for future use. We observed bacterial but not fungal biofilms that formed within 6 hours of infection. Tissue integrity was observed for at least 36 hrs. The formulation of antibiotics with nanocin enhances activity. The technique for successfully infecting porcine corneas was developed at the University of Sheffield. The technique was transferred to Tecrea, with training of a researcher in Sheffield and the supply of a number of the glass rings required to contain the pathogen. Knowledge about the use of fungal pathogens was supplied by Tecrea to the University of Sheffield. We intend to publish the data obtained in the P. aeruginosa infection assays, although the data with the formulations will not be used. The fungal infections will be continued at Tecrea and will also be published in due course. The corneal opacity secondary measure will be further analysed. At the very least, it should provide a striking visual indicator of antibiotic activity. The use of Nanocin to penetrate biofilms may be further developed. Successful application for NBIC funding in POC2. MRC grant application pending feedback. Working with industry partners Blueberry and Tecrea has been a very good experience, with free exchange of ideas on both sides. An iCASE PhD student supported by Blueberry, visited Sheffield for 4 weeks and learned the porcine cornea infection method. In return, she supplied us with new fungal strains and training on their growth. Feedback from both industrial collaborators: Both companies happy with efficacy of their actives, model and tech-transfer and in particular the Studentship. Blueberry: Blueberry may pursue product development and IP once PhD published - November 2021. Blueberry to take the technology to India (clinical work) or product development after PhD finished (November 2021). Tecrea: Established tolerability, efficacy of the compounds in an ex-vivo study and use of the model (tech transfer to their lab). We have some formulations and approach which we think has some potential in treating eye infections. In terms of research, the benefit was that we got some evidence about the tolerability of the formulations, the eye infection model and the some evidence about the efficacy. We got some confidence the model was valid and that the model could be used. We went into it having read about the model but we hadn't sort of experienced it directly. A good outcome. With drug development, it's a long process. A lot went into developing these formulations and we've done a lot of in vitro antimicrobial work on it. This was the next step - an ex vivo evaluation, further building confidence in the project. The next step would probably be for us to go to an animal model, to build confidence further because we did not see any problems in the ex-vivo model (which is a good sign, though there could be other inflammatory reactions that we need to look out for). And then you would start a clinical programme - the worst case scenario could five years and a billion dollars. In this case, we think it can go faster because of the nature of the formulations are easier.
Start Year 2019
 
Description NBIC POC 01POC18029 Corneal biofilm models and anti-biofilm nanoparticles (Peter Monk) 
Organisation Tecrea Ltd
Country United Kingdom 
Sector Private 
PI Contribution In established eye infections, biofilms often form and are difficult to treat with conventional antibiotics or antifungals, a problem exacerbated by the rise of antimicrobial resistance in a wide range of organisms. In this application, we intend to exploit in vitro models of biofilm formation in human corneal cells and porcine corneal explants to determine the efficacy of a series of nanoparticle formulations of antimicrobial drugs on developing and mature biofilms. Such formulations are predicted to enhance efficacy through the disruption of biofilms and improved drug retention in the eye. A simple corneal epithelial cell monolayer assay will allow us to study microbial adhesion and the microcolony formation that precedes the biofilm. Drugs acting at this stage might inhibit adhesion, bacterial cell-cell communication or extracellular polymeric substance production in addition to direct effects on growth and viability. Success here will be measured as the recording of microcolony formation over 24h using microscopy, flow cytometry and fluorescence spectroscopy in the presence and absence of the test compounds. To further assess the most promising formulations, a more sophisticated corneal explant culture system will be used for longer term (48-72h) infection that should allow mature biofilm formation and the penetration of the microbes into deeper layers of the corneum. Success here will be determined as the establishment of infections using a range of clinically relevant bacterial and fungal pathogens, recorded using confocal microscopy, Raman spectroscopy and flow cytometry. The efficacy of compounds on the developing and established biofilms will be recorded using viability assays and microbial colony forming unit counts. The pathogens to be studied will be clinical isolates from Dr Prashant Garg at LV Prasad Eye Institute, Hyderabad: Gram positive bacteria (Staphylococcus aureus), Gram negative (Pseudomonas aeruginosa) and fungal (Candida albicans).
Collaborator Contribution University of Sheffield: Supply of porcine corneal infection models; supply of clinical isolates of microbial keratitis pathogens; supply of expertise in the design and interpretation of infection experiments. Tecrea Ltd: Supply of nanoparticle materials and antibiotics; supply of fungal pathogens; supply of expertise in the use of fungal pathogens in ex vivo models.
Impact Feedback from PML: The porcine corneal model has been successfully tested and the technique passed on to Tecrea for future use. We observed bacterial but not fungal biofilms that formed within 6 hours of infection. Tissue integrity was observed for at least 36 hrs. The formulation of antibiotics with nanocin enhances activity. The technique for successfully infecting porcine corneas was developed at the University of Sheffield. The technique was transferred to Tecrea, with training of a researcher in Sheffield and the supply of a number of the glass rings required to contain the pathogen. Knowledge about the use of fungal pathogens was supplied by Tecrea to the University of Sheffield. We intend to publish the data obtained in the P. aeruginosa infection assays, although the data with the formulations will not be used. The fungal infections will be continued at Tecrea and will also be published in due course. The corneal opacity secondary measure will be further analysed. At the very least, it should provide a striking visual indicator of antibiotic activity. The use of Nanocin to penetrate biofilms may be further developed. Successful application for NBIC funding in POC2. MRC grant application pending feedback. Working with industry partners Blueberry and Tecrea has been a very good experience, with free exchange of ideas on both sides. An iCASE PhD student supported by Blueberry, visited Sheffield for 4 weeks and learned the porcine cornea infection method. In return, she supplied us with new fungal strains and training on their growth. Feedback from both industrial collaborators: Both companies happy with efficacy of their actives, model and tech-transfer and in particular the Studentship. Blueberry: Blueberry may pursue product development and IP once PhD published - November 2021. Blueberry to take the technology to India (clinical work) or product development after PhD finished (November 2021). Tecrea: Established tolerability, efficacy of the compounds in an ex-vivo study and use of the model (tech transfer to their lab). We have some formulations and approach which we think has some potential in treating eye infections. In terms of research, the benefit was that we got some evidence about the tolerability of the formulations, the eye infection model and the some evidence about the efficacy. We got some confidence the model was valid and that the model could be used. We went into it having read about the model but we hadn't sort of experienced it directly. A good outcome. With drug development, it's a long process. A lot went into developing these formulations and we've done a lot of in vitro antimicrobial work on it. This was the next step - an ex vivo evaluation, further building confidence in the project. The next step would probably be for us to go to an animal model, to build confidence further because we did not see any problems in the ex-vivo model (which is a good sign, though there could be other inflammatory reactions that we need to look out for). And then you would start a clinical programme - the worst case scenario could five years and a billion dollars. In this case, we think it can go faster because of the nature of the formulations are easier.
Start Year 2019
 
Description NBIC POC 01POC18029 Corneal biofilm models and anti-biofilm nanoparticles (Peter Monk) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution In established eye infections, biofilms often form and are difficult to treat with conventional antibiotics or antifungals, a problem exacerbated by the rise of antimicrobial resistance in a wide range of organisms. In this application, we intend to exploit in vitro models of biofilm formation in human corneal cells and porcine corneal explants to determine the efficacy of a series of nanoparticle formulations of antimicrobial drugs on developing and mature biofilms. Such formulations are predicted to enhance efficacy through the disruption of biofilms and improved drug retention in the eye. A simple corneal epithelial cell monolayer assay will allow us to study microbial adhesion and the microcolony formation that precedes the biofilm. Drugs acting at this stage might inhibit adhesion, bacterial cell-cell communication or extracellular polymeric substance production in addition to direct effects on growth and viability. Success here will be measured as the recording of microcolony formation over 24h using microscopy, flow cytometry and fluorescence spectroscopy in the presence and absence of the test compounds. To further assess the most promising formulations, a more sophisticated corneal explant culture system will be used for longer term (48-72h) infection that should allow mature biofilm formation and the penetration of the microbes into deeper layers of the corneum. Success here will be determined as the establishment of infections using a range of clinically relevant bacterial and fungal pathogens, recorded using confocal microscopy, Raman spectroscopy and flow cytometry. The efficacy of compounds on the developing and established biofilms will be recorded using viability assays and microbial colony forming unit counts. The pathogens to be studied will be clinical isolates from Dr Prashant Garg at LV Prasad Eye Institute, Hyderabad: Gram positive bacteria (Staphylococcus aureus), Gram negative (Pseudomonas aeruginosa) and fungal (Candida albicans).
Collaborator Contribution University of Sheffield: Supply of porcine corneal infection models; supply of clinical isolates of microbial keratitis pathogens; supply of expertise in the design and interpretation of infection experiments. Tecrea Ltd: Supply of nanoparticle materials and antibiotics; supply of fungal pathogens; supply of expertise in the use of fungal pathogens in ex vivo models.
Impact Feedback from PML: The porcine corneal model has been successfully tested and the technique passed on to Tecrea for future use. We observed bacterial but not fungal biofilms that formed within 6 hours of infection. Tissue integrity was observed for at least 36 hrs. The formulation of antibiotics with nanocin enhances activity. The technique for successfully infecting porcine corneas was developed at the University of Sheffield. The technique was transferred to Tecrea, with training of a researcher in Sheffield and the supply of a number of the glass rings required to contain the pathogen. Knowledge about the use of fungal pathogens was supplied by Tecrea to the University of Sheffield. We intend to publish the data obtained in the P. aeruginosa infection assays, although the data with the formulations will not be used. The fungal infections will be continued at Tecrea and will also be published in due course. The corneal opacity secondary measure will be further analysed. At the very least, it should provide a striking visual indicator of antibiotic activity. The use of Nanocin to penetrate biofilms may be further developed. Successful application for NBIC funding in POC2. MRC grant application pending feedback. Working with industry partners Blueberry and Tecrea has been a very good experience, with free exchange of ideas on both sides. An iCASE PhD student supported by Blueberry, visited Sheffield for 4 weeks and learned the porcine cornea infection method. In return, she supplied us with new fungal strains and training on their growth. Feedback from both industrial collaborators: Both companies happy with efficacy of their actives, model and tech-transfer and in particular the Studentship. Blueberry: Blueberry may pursue product development and IP once PhD published - November 2021. Blueberry to take the technology to India (clinical work) or product development after PhD finished (November 2021). Tecrea: Established tolerability, efficacy of the compounds in an ex-vivo study and use of the model (tech transfer to their lab). We have some formulations and approach which we think has some potential in treating eye infections. In terms of research, the benefit was that we got some evidence about the tolerability of the formulations, the eye infection model and the some evidence about the efficacy. We got some confidence the model was valid and that the model could be used. We went into it having read about the model but we hadn't sort of experienced it directly. A good outcome. With drug development, it's a long process. A lot went into developing these formulations and we've done a lot of in vitro antimicrobial work on it. This was the next step - an ex vivo evaluation, further building confidence in the project. The next step would probably be for us to go to an animal model, to build confidence further because we did not see any problems in the ex-vivo model (which is a good sign, though there could be other inflammatory reactions that we need to look out for). And then you would start a clinical programme - the worst case scenario could five years and a billion dollars. In this case, we think it can go faster because of the nature of the formulations are easier.
Start Year 2019
 
Description NBIC POC 01POC18032 Development of synthetic biofilm for calibrating the effect of coatings on reducing marine viscoelastic drag. (Paul Stoodley) 
Organisation AkzoNobel
Department AkzoNobel UK
Country United Kingdom 
Sector Private 
PI Contribution Estimates of the magnitude of biofilm associated drag on a marine vessel is commonly cited between 1 - 18%. We will address the knowledge gap relating to biofilm morphology and physicomechanical properties. By relating drag to the physical interactions between fluid flow and the biofilm we will better understand the role that biofilm properties play in influencing drag penalty. Current testing relates drag to sand grain roughness, however biofilms are viscoelastic materials which deform under shear when the ship is moving. Viscoelasticity generates a variety of biofilm-fluid interactions which makes correlating drag measurements with biofilm structural parameters difficult and there are no good testing models. We have designed and built a marine biofilm flow cell (MBFC) for testing coatings and now require the viscoelastic calibration standards to improve functionality of the system. Currently data on biofilm drag penalty is related to an equivalent calibrated sand grain roughness but this negates the effect that viscoelasticity of the biofilm may have on the associated drag penalty. The project aims are: • Create novel viscoelastic standard materials with mechanical properties similar to biofilms and compatible with the biofilm drag penalty flow cell system. • Cast artificial biofilms with vicoelastic material using sand grain moulds to provide standard morphology to simultaneously measure the viscoelasticity of biofilms the associated drag penalty when exposed to shear flow. • Develop an image analysis routine to analyse images from optical coherence tomography (OCT) to measure biofilm deformation and viscoelastic parameters under defined shear. Success will be measured by the: • generation of a system capable of measuring the drag penalty of a material whilst measuring the physical response to shear. • demonstration of a more appropriate method for calibration of biofilms in hydrodynamic laboratory testing facilities. • development of a MatLab based image analysis software to analyse OCT data sets.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Key conclusions from the project were as follows: • Replica copies of a given rigid surface can be successfully reproduced, with micron-scale fidelity, in materials with differing mechanical properties using the developed casting method. • The elastic properties of a surface with a given roughness profile significantly alter how much frictional drag will be generated when the surface is subject to a given flow condition. • Independent variation of surface roughness and material properties of artificial biofilms for flow cell calibration can now progress within framework established in this PoC project. Significant know-how in terms of how to successfully manipulate the range of materials examined was developed in the course of the pre-project scoping work and project term. This is not commercially exploitable but represents a strong foundation for our next phase of the research. The results and know-how generated in this project are currently being expanded on through a dedicated PhD studentship at University of Southampton supervised by Julian Wharton and Paul Stoodley and majority funded by AkzoNobel. The studentship is a study of the material properties of fouling biofilms and their relationship to frictional drag. Objectives include expanding the non-rigid calibration datasets developed as part of this NBIC PoC.
Start Year 2019
 
Description NBIC POC 01POC18032 Development of synthetic biofilm for calibrating the effect of coatings on reducing marine viscoelastic drag. (Paul Stoodley) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Estimates of the magnitude of biofilm associated drag on a marine vessel is commonly cited between 1 - 18%. We will address the knowledge gap relating to biofilm morphology and physicomechanical properties. By relating drag to the physical interactions between fluid flow and the biofilm we will better understand the role that biofilm properties play in influencing drag penalty. Current testing relates drag to sand grain roughness, however biofilms are viscoelastic materials which deform under shear when the ship is moving. Viscoelasticity generates a variety of biofilm-fluid interactions which makes correlating drag measurements with biofilm structural parameters difficult and there are no good testing models. We have designed and built a marine biofilm flow cell (MBFC) for testing coatings and now require the viscoelastic calibration standards to improve functionality of the system. Currently data on biofilm drag penalty is related to an equivalent calibrated sand grain roughness but this negates the effect that viscoelasticity of the biofilm may have on the associated drag penalty. The project aims are: • Create novel viscoelastic standard materials with mechanical properties similar to biofilms and compatible with the biofilm drag penalty flow cell system. • Cast artificial biofilms with vicoelastic material using sand grain moulds to provide standard morphology to simultaneously measure the viscoelasticity of biofilms the associated drag penalty when exposed to shear flow. • Develop an image analysis routine to analyse images from optical coherence tomography (OCT) to measure biofilm deformation and viscoelastic parameters under defined shear. Success will be measured by the: • generation of a system capable of measuring the drag penalty of a material whilst measuring the physical response to shear. • demonstration of a more appropriate method for calibration of biofilms in hydrodynamic laboratory testing facilities. • development of a MatLab based image analysis software to analyse OCT data sets.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Key conclusions from the project were as follows: • Replica copies of a given rigid surface can be successfully reproduced, with micron-scale fidelity, in materials with differing mechanical properties using the developed casting method. • The elastic properties of a surface with a given roughness profile significantly alter how much frictional drag will be generated when the surface is subject to a given flow condition. • Independent variation of surface roughness and material properties of artificial biofilms for flow cell calibration can now progress within framework established in this PoC project. Significant know-how in terms of how to successfully manipulate the range of materials examined was developed in the course of the pre-project scoping work and project term. This is not commercially exploitable but represents a strong foundation for our next phase of the research. The results and know-how generated in this project are currently being expanded on through a dedicated PhD studentship at University of Southampton supervised by Julian Wharton and Paul Stoodley and majority funded by AkzoNobel. The studentship is a study of the material properties of fouling biofilms and their relationship to frictional drag. Objectives include expanding the non-rigid calibration datasets developed as part of this NBIC PoC.
Start Year 2019
 
Description NBIC POC 01POC18032 Development of synthetic biofilm for calibrating the effect of coatings on reducing marine viscoelastic drag. (Paul Stoodley) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Estimates of the magnitude of biofilm associated drag on a marine vessel is commonly cited between 1 - 18%. We will address the knowledge gap relating to biofilm morphology and physicomechanical properties. By relating drag to the physical interactions between fluid flow and the biofilm we will better understand the role that biofilm properties play in influencing drag penalty. Current testing relates drag to sand grain roughness, however biofilms are viscoelastic materials which deform under shear when the ship is moving. Viscoelasticity generates a variety of biofilm-fluid interactions which makes correlating drag measurements with biofilm structural parameters difficult and there are no good testing models. We have designed and built a marine biofilm flow cell (MBFC) for testing coatings and now require the viscoelastic calibration standards to improve functionality of the system. Currently data on biofilm drag penalty is related to an equivalent calibrated sand grain roughness but this negates the effect that viscoelasticity of the biofilm may have on the associated drag penalty. The project aims are: • Create novel viscoelastic standard materials with mechanical properties similar to biofilms and compatible with the biofilm drag penalty flow cell system. • Cast artificial biofilms with vicoelastic material using sand grain moulds to provide standard morphology to simultaneously measure the viscoelasticity of biofilms the associated drag penalty when exposed to shear flow. • Develop an image analysis routine to analyse images from optical coherence tomography (OCT) to measure biofilm deformation and viscoelastic parameters under defined shear. Success will be measured by the: • generation of a system capable of measuring the drag penalty of a material whilst measuring the physical response to shear. • demonstration of a more appropriate method for calibration of biofilms in hydrodynamic laboratory testing facilities. • development of a MatLab based image analysis software to analyse OCT data sets.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Key conclusions from the project were as follows: • Replica copies of a given rigid surface can be successfully reproduced, with micron-scale fidelity, in materials with differing mechanical properties using the developed casting method. • The elastic properties of a surface with a given roughness profile significantly alter how much frictional drag will be generated when the surface is subject to a given flow condition. • Independent variation of surface roughness and material properties of artificial biofilms for flow cell calibration can now progress within framework established in this PoC project. Significant know-how in terms of how to successfully manipulate the range of materials examined was developed in the course of the pre-project scoping work and project term. This is not commercially exploitable but represents a strong foundation for our next phase of the research. The results and know-how generated in this project are currently being expanded on through a dedicated PhD studentship at University of Southampton supervised by Julian Wharton and Paul Stoodley and majority funded by AkzoNobel. The studentship is a study of the material properties of fouling biofilms and their relationship to frictional drag. Objectives include expanding the non-rigid calibration datasets developed as part of this NBIC PoC.
Start Year 2019
 
Description NBIC POC 01POC18034 Managing Aquatic Biofilms via Surface Manipulation (Katherine Fish) 
Organisation AkzoNobel
Department AkzoNobel UK
Country United Kingdom 
Sector Private 
PI Contribution Safe drinking water is essential to protect public health. Treated drinking water is generally high-quality but degrades during distribution from treatment works to consumers through complex pipe infrastructure: drinking water distribution systems (DWDS). Biofilms form on the extensive internal DWDS surface and are central to the processes governing water quality (WQ) at the tap, via their action or mobilisation into the bulk-water. Currently, no biofilm-specific management approaches are available within the urban water sector and ageing DWDS (average pipe age >70 years) are facing new pressures (increasing urbanisation, water shortages) which will heighten the risks to WQ unless tools are developed to manage DWDS biofilm formation/removal. Aligning with NBIC goals of biofilm management and prevention, this project aims to assess the feasibility of applying a "marine-coating" (successfully used to manage biofouling on commercial ships and pleasure craft) in DWDS to control biofilm accumulation/mobilisation, which requires understanding of biofilm characteristics and coating behaviour between the two distinct aquatic environments. Therefore, the two main objectives of this project are to: 1. determine the "marine-coating" performance in the novel application to DWDS pipelines 2. compare biofilm formation upon the coating in marine and DWDS environments via cross-application of analytical techniques Success measures include the generation of knowledge regarding performance of the "marine-coating" in DWDS compared to a control, with respect to biofilm accumulation and subsequent risk of mobilisation into the bulk-water. Cross-application of biofilm analysis techniques from each sector is a further success measure, namely assessing the innovative application of flow cytometry to marine-biofilms and the first use of optical-coherence tomography (OCT) to biofilms from cold water DWDS pipelines. The data generated will provide evidence regarding the potential for coatings from other aquatic sectors to be applied to DWDS and will highlight similarities/differences in biofilm characteristics between the marine and drinking water environments. Briefly, this project requires the modification of the UoS full-scale DWDS-test facility (WP1) to compare: a) biofilm development in a high-density-polyethylene (HDPE) pipe (control) with a "marine-coated-HDPE" pipe; and b) impact of biofilm mobilisation from each surface (control and coated) on water quality (WP2). In parallel, an established marine open-channel testing facility at AkzoNobel will be used to monitor development of natural-vessel-sourced biofilms on the coated-surface prior to a mobilisation phase using a fully turbulent hydrodynamic flow cell, enabling comparison of biofilm behaviour between aquatic systems (WP3). DWDS water quality (various parameters) and biofilms will be sampled regularly for detailed comparisons between performance of the coating and HDPE. Background sampling will be undertaken during the marine-development phase and biofilms will be sampled at the end of the development and mobilisation phases for comparison with DWDS biofilms. Biofilm analysis will combine Flow Cytometry (FC) for microbial cell enumeration (and viability) and Optical Coherence Tomography (OCT) for biofilm volumes and visualisation (WP4). The main deliverable of this project will be the production and dissemination of a final report (WP5). Table 2 highlights key risks associated with this project and their management. UoS and AkzoNobel will direct the project, with DCWW input at steering meetings. Project and steering meetings align with milestones to check work-package progression and act as decision check-points. UoS and AkzoNobel will have regular meetings to ensure timely project completion. KF and MD will be responsible for day-to-day project management for the UoS and AzN parts of the project, respectively. They will report to JB or KR/CP, in-between project progress meetings. Kat Fish rated PI experience as invaluable, supporting her confidence as an early career researcher (POC2 funded (Co-I), PhD with a company, fellowship application). She presented this work at an international conference September 2020, Sweden.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Sheffield: The findings from these experiments suggest that hydraulic regime has a greater effect on biofilm accumulation than the type of pipe coating. Additionally, the first use of OCT to analyse biofilms from cold water DWDS has confirmed that detection is possible, even on thin winter biofilm samples. The marine coating did perform differently to the HDPE during the flushing tests of Steady State biofilms specifically, with the coated surface potentially supporting the release of biofilm cells at lower flow rates/shear stresses. However, further testing is required to assess the performance of the marine coating on thicker biofilms. The background IP within this project rests with AkzoNobel, who have developed the coating (EP2961805B1: Anti-fouling compositions with a fluorinated oxyalkylene-containing polymer or oligomer). All background IP regarding the drinking water test facility and related protocols belongs to the University of Sheffield. The University of Sheffield have freedom to operate within this collaboration and are granted permission to publish findings from the project on the understanding that AkzoNobel will see and approve any outputs prior to their release into the research/public domain. No further IP was generated. They run the test again in autumn 2020 (internal funds and Akzo in kind support, estimated at £38,000 in value), the results are surprising - the coating does not have an impact but hydraulics yes - useful for further research. They will run it again without the coating (Akzo still have a watching brief), as this is an easier solution environmentally. AkzoNobel will continue to run the marine experiments beyond the end date of this project. Depending on completion of the marine tests by the industry partner and the data generated, there may be scope for a further publication, which would be a comparative study of biofilms in the two aquatic environments. Feedback from Kat Fish: Having NBIC hub support was empowering. A platform - a single point - via which she can reach other people. Outreach also important for University - to share her ideas about clean water with school children. Rated PI experience as invaluable, supporting her confidence as an early career researcher (POC2 funded (Co-I), PhD with a company, fellowship application). Presented this research at an international conference ("RISE: Materials in Contact with Drinking Water") September 2020, Sweden. Social benefits: Clean drinking water benefit to the public. Feedback from Welsh Water: - If they could develop the coating that would be of a great benefit in terms of reducing biofilm growth and discoloration - Welsh Water would want AkzoNobel to come to them for testing. - The project run smoothly. Initial issues with getting the right coating but once overcome, it seemed to run very smoothly, lots of communication. Feedback from AkzoNobel: • Successful project, looking into 'how to coat in an environmentally friendly way - shipping is a different field, so cross-functional element. They wanted to gain understanding what involved in an antibiofilm coating, what is going on in drinking water - a new field for the Company. • Methodology - difficulties and practicality (Flow cytometry, imaging - learning how to properly image and how to quantify these images, OCT). They didn't complete objectives in time but as outlined above this work has continued. • Good experience. Moving forward - no immediate plans, at present exploring new markets/products. • Their goal for the POC1 was to explore a new idea, duration only 6 months limiting. They learnt what they needed.
Start Year 2019
 
Description NBIC POC 01POC18034 Managing Aquatic Biofilms via Surface Manipulation (Katherine Fish) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Safe drinking water is essential to protect public health. Treated drinking water is generally high-quality but degrades during distribution from treatment works to consumers through complex pipe infrastructure: drinking water distribution systems (DWDS). Biofilms form on the extensive internal DWDS surface and are central to the processes governing water quality (WQ) at the tap, via their action or mobilisation into the bulk-water. Currently, no biofilm-specific management approaches are available within the urban water sector and ageing DWDS (average pipe age >70 years) are facing new pressures (increasing urbanisation, water shortages) which will heighten the risks to WQ unless tools are developed to manage DWDS biofilm formation/removal. Aligning with NBIC goals of biofilm management and prevention, this project aims to assess the feasibility of applying a "marine-coating" (successfully used to manage biofouling on commercial ships and pleasure craft) in DWDS to control biofilm accumulation/mobilisation, which requires understanding of biofilm characteristics and coating behaviour between the two distinct aquatic environments. Therefore, the two main objectives of this project are to: 1. determine the "marine-coating" performance in the novel application to DWDS pipelines 2. compare biofilm formation upon the coating in marine and DWDS environments via cross-application of analytical techniques Success measures include the generation of knowledge regarding performance of the "marine-coating" in DWDS compared to a control, with respect to biofilm accumulation and subsequent risk of mobilisation into the bulk-water. Cross-application of biofilm analysis techniques from each sector is a further success measure, namely assessing the innovative application of flow cytometry to marine-biofilms and the first use of optical-coherence tomography (OCT) to biofilms from cold water DWDS pipelines. The data generated will provide evidence regarding the potential for coatings from other aquatic sectors to be applied to DWDS and will highlight similarities/differences in biofilm characteristics between the marine and drinking water environments. Briefly, this project requires the modification of the UoS full-scale DWDS-test facility (WP1) to compare: a) biofilm development in a high-density-polyethylene (HDPE) pipe (control) with a "marine-coated-HDPE" pipe; and b) impact of biofilm mobilisation from each surface (control and coated) on water quality (WP2). In parallel, an established marine open-channel testing facility at AkzoNobel will be used to monitor development of natural-vessel-sourced biofilms on the coated-surface prior to a mobilisation phase using a fully turbulent hydrodynamic flow cell, enabling comparison of biofilm behaviour between aquatic systems (WP3). DWDS water quality (various parameters) and biofilms will be sampled regularly for detailed comparisons between performance of the coating and HDPE. Background sampling will be undertaken during the marine-development phase and biofilms will be sampled at the end of the development and mobilisation phases for comparison with DWDS biofilms. Biofilm analysis will combine Flow Cytometry (FC) for microbial cell enumeration (and viability) and Optical Coherence Tomography (OCT) for biofilm volumes and visualisation (WP4). The main deliverable of this project will be the production and dissemination of a final report (WP5). Table 2 highlights key risks associated with this project and their management. UoS and AkzoNobel will direct the project, with DCWW input at steering meetings. Project and steering meetings align with milestones to check work-package progression and act as decision check-points. UoS and AkzoNobel will have regular meetings to ensure timely project completion. KF and MD will be responsible for day-to-day project management for the UoS and AzN parts of the project, respectively. They will report to JB or KR/CP, in-between project progress meetings. Kat Fish rated PI experience as invaluable, supporting her confidence as an early career researcher (POC2 funded (Co-I), PhD with a company, fellowship application). She presented this work at an international conference September 2020, Sweden.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Sheffield: The findings from these experiments suggest that hydraulic regime has a greater effect on biofilm accumulation than the type of pipe coating. Additionally, the first use of OCT to analyse biofilms from cold water DWDS has confirmed that detection is possible, even on thin winter biofilm samples. The marine coating did perform differently to the HDPE during the flushing tests of Steady State biofilms specifically, with the coated surface potentially supporting the release of biofilm cells at lower flow rates/shear stresses. However, further testing is required to assess the performance of the marine coating on thicker biofilms. The background IP within this project rests with AkzoNobel, who have developed the coating (EP2961805B1: Anti-fouling compositions with a fluorinated oxyalkylene-containing polymer or oligomer). All background IP regarding the drinking water test facility and related protocols belongs to the University of Sheffield. The University of Sheffield have freedom to operate within this collaboration and are granted permission to publish findings from the project on the understanding that AkzoNobel will see and approve any outputs prior to their release into the research/public domain. No further IP was generated. They run the test again in autumn 2020 (internal funds and Akzo in kind support, estimated at £38,000 in value), the results are surprising - the coating does not have an impact but hydraulics yes - useful for further research. They will run it again without the coating (Akzo still have a watching brief), as this is an easier solution environmentally. AkzoNobel will continue to run the marine experiments beyond the end date of this project. Depending on completion of the marine tests by the industry partner and the data generated, there may be scope for a further publication, which would be a comparative study of biofilms in the two aquatic environments. Feedback from Kat Fish: Having NBIC hub support was empowering. A platform - a single point - via which she can reach other people. Outreach also important for University - to share her ideas about clean water with school children. Rated PI experience as invaluable, supporting her confidence as an early career researcher (POC2 funded (Co-I), PhD with a company, fellowship application). Presented this research at an international conference ("RISE: Materials in Contact with Drinking Water") September 2020, Sweden. Social benefits: Clean drinking water benefit to the public. Feedback from Welsh Water: - If they could develop the coating that would be of a great benefit in terms of reducing biofilm growth and discoloration - Welsh Water would want AkzoNobel to come to them for testing. - The project run smoothly. Initial issues with getting the right coating but once overcome, it seemed to run very smoothly, lots of communication. Feedback from AkzoNobel: • Successful project, looking into 'how to coat in an environmentally friendly way - shipping is a different field, so cross-functional element. They wanted to gain understanding what involved in an antibiofilm coating, what is going on in drinking water - a new field for the Company. • Methodology - difficulties and practicality (Flow cytometry, imaging - learning how to properly image and how to quantify these images, OCT). They didn't complete objectives in time but as outlined above this work has continued. • Good experience. Moving forward - no immediate plans, at present exploring new markets/products. • Their goal for the POC1 was to explore a new idea, duration only 6 months limiting. They learnt what they needed.
Start Year 2019
 
Description NBIC POC 01POC18034 Managing Aquatic Biofilms via Surface Manipulation (Katherine Fish) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Safe drinking water is essential to protect public health. Treated drinking water is generally high-quality but degrades during distribution from treatment works to consumers through complex pipe infrastructure: drinking water distribution systems (DWDS). Biofilms form on the extensive internal DWDS surface and are central to the processes governing water quality (WQ) at the tap, via their action or mobilisation into the bulk-water. Currently, no biofilm-specific management approaches are available within the urban water sector and ageing DWDS (average pipe age >70 years) are facing new pressures (increasing urbanisation, water shortages) which will heighten the risks to WQ unless tools are developed to manage DWDS biofilm formation/removal. Aligning with NBIC goals of biofilm management and prevention, this project aims to assess the feasibility of applying a "marine-coating" (successfully used to manage biofouling on commercial ships and pleasure craft) in DWDS to control biofilm accumulation/mobilisation, which requires understanding of biofilm characteristics and coating behaviour between the two distinct aquatic environments. Therefore, the two main objectives of this project are to: 1. determine the "marine-coating" performance in the novel application to DWDS pipelines 2. compare biofilm formation upon the coating in marine and DWDS environments via cross-application of analytical techniques Success measures include the generation of knowledge regarding performance of the "marine-coating" in DWDS compared to a control, with respect to biofilm accumulation and subsequent risk of mobilisation into the bulk-water. Cross-application of biofilm analysis techniques from each sector is a further success measure, namely assessing the innovative application of flow cytometry to marine-biofilms and the first use of optical-coherence tomography (OCT) to biofilms from cold water DWDS pipelines. The data generated will provide evidence regarding the potential for coatings from other aquatic sectors to be applied to DWDS and will highlight similarities/differences in biofilm characteristics between the marine and drinking water environments. Briefly, this project requires the modification of the UoS full-scale DWDS-test facility (WP1) to compare: a) biofilm development in a high-density-polyethylene (HDPE) pipe (control) with a "marine-coated-HDPE" pipe; and b) impact of biofilm mobilisation from each surface (control and coated) on water quality (WP2). In parallel, an established marine open-channel testing facility at AkzoNobel will be used to monitor development of natural-vessel-sourced biofilms on the coated-surface prior to a mobilisation phase using a fully turbulent hydrodynamic flow cell, enabling comparison of biofilm behaviour between aquatic systems (WP3). DWDS water quality (various parameters) and biofilms will be sampled regularly for detailed comparisons between performance of the coating and HDPE. Background sampling will be undertaken during the marine-development phase and biofilms will be sampled at the end of the development and mobilisation phases for comparison with DWDS biofilms. Biofilm analysis will combine Flow Cytometry (FC) for microbial cell enumeration (and viability) and Optical Coherence Tomography (OCT) for biofilm volumes and visualisation (WP4). The main deliverable of this project will be the production and dissemination of a final report (WP5). Table 2 highlights key risks associated with this project and their management. UoS and AkzoNobel will direct the project, with DCWW input at steering meetings. Project and steering meetings align with milestones to check work-package progression and act as decision check-points. UoS and AkzoNobel will have regular meetings to ensure timely project completion. KF and MD will be responsible for day-to-day project management for the UoS and AzN parts of the project, respectively. They will report to JB or KR/CP, in-between project progress meetings. Kat Fish rated PI experience as invaluable, supporting her confidence as an early career researcher (POC2 funded (Co-I), PhD with a company, fellowship application). She presented this work at an international conference September 2020, Sweden.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Sheffield: The findings from these experiments suggest that hydraulic regime has a greater effect on biofilm accumulation than the type of pipe coating. Additionally, the first use of OCT to analyse biofilms from cold water DWDS has confirmed that detection is possible, even on thin winter biofilm samples. The marine coating did perform differently to the HDPE during the flushing tests of Steady State biofilms specifically, with the coated surface potentially supporting the release of biofilm cells at lower flow rates/shear stresses. However, further testing is required to assess the performance of the marine coating on thicker biofilms. The background IP within this project rests with AkzoNobel, who have developed the coating (EP2961805B1: Anti-fouling compositions with a fluorinated oxyalkylene-containing polymer or oligomer). All background IP regarding the drinking water test facility and related protocols belongs to the University of Sheffield. The University of Sheffield have freedom to operate within this collaboration and are granted permission to publish findings from the project on the understanding that AkzoNobel will see and approve any outputs prior to their release into the research/public domain. No further IP was generated. They run the test again in autumn 2020 (internal funds and Akzo in kind support, estimated at £38,000 in value), the results are surprising - the coating does not have an impact but hydraulics yes - useful for further research. They will run it again without the coating (Akzo still have a watching brief), as this is an easier solution environmentally. AkzoNobel will continue to run the marine experiments beyond the end date of this project. Depending on completion of the marine tests by the industry partner and the data generated, there may be scope for a further publication, which would be a comparative study of biofilms in the two aquatic environments. Feedback from Kat Fish: Having NBIC hub support was empowering. A platform - a single point - via which she can reach other people. Outreach also important for University - to share her ideas about clean water with school children. Rated PI experience as invaluable, supporting her confidence as an early career researcher (POC2 funded (Co-I), PhD with a company, fellowship application). Presented this research at an international conference ("RISE: Materials in Contact with Drinking Water") September 2020, Sweden. Social benefits: Clean drinking water benefit to the public. Feedback from Welsh Water: - If they could develop the coating that would be of a great benefit in terms of reducing biofilm growth and discoloration - Welsh Water would want AkzoNobel to come to them for testing. - The project run smoothly. Initial issues with getting the right coating but once overcome, it seemed to run very smoothly, lots of communication. Feedback from AkzoNobel: • Successful project, looking into 'how to coat in an environmentally friendly way - shipping is a different field, so cross-functional element. They wanted to gain understanding what involved in an antibiofilm coating, what is going on in drinking water - a new field for the Company. • Methodology - difficulties and practicality (Flow cytometry, imaging - learning how to properly image and how to quantify these images, OCT). They didn't complete objectives in time but as outlined above this work has continued. • Good experience. Moving forward - no immediate plans, at present exploring new markets/products. • Their goal for the POC1 was to explore a new idea, duration only 6 months limiting. They learnt what they needed.
Start Year 2019
 
Description NBIC POC 01POC18034 Managing Aquatic Biofilms via Surface Manipulation (Katherine Fish) 
Organisation Welsh Water
Country United Kingdom 
Sector Private 
PI Contribution Safe drinking water is essential to protect public health. Treated drinking water is generally high-quality but degrades during distribution from treatment works to consumers through complex pipe infrastructure: drinking water distribution systems (DWDS). Biofilms form on the extensive internal DWDS surface and are central to the processes governing water quality (WQ) at the tap, via their action or mobilisation into the bulk-water. Currently, no biofilm-specific management approaches are available within the urban water sector and ageing DWDS (average pipe age >70 years) are facing new pressures (increasing urbanisation, water shortages) which will heighten the risks to WQ unless tools are developed to manage DWDS biofilm formation/removal. Aligning with NBIC goals of biofilm management and prevention, this project aims to assess the feasibility of applying a "marine-coating" (successfully used to manage biofouling on commercial ships and pleasure craft) in DWDS to control biofilm accumulation/mobilisation, which requires understanding of biofilm characteristics and coating behaviour between the two distinct aquatic environments. Therefore, the two main objectives of this project are to: 1. determine the "marine-coating" performance in the novel application to DWDS pipelines 2. compare biofilm formation upon the coating in marine and DWDS environments via cross-application of analytical techniques Success measures include the generation of knowledge regarding performance of the "marine-coating" in DWDS compared to a control, with respect to biofilm accumulation and subsequent risk of mobilisation into the bulk-water. Cross-application of biofilm analysis techniques from each sector is a further success measure, namely assessing the innovative application of flow cytometry to marine-biofilms and the first use of optical-coherence tomography (OCT) to biofilms from cold water DWDS pipelines. The data generated will provide evidence regarding the potential for coatings from other aquatic sectors to be applied to DWDS and will highlight similarities/differences in biofilm characteristics between the marine and drinking water environments. Briefly, this project requires the modification of the UoS full-scale DWDS-test facility (WP1) to compare: a) biofilm development in a high-density-polyethylene (HDPE) pipe (control) with a "marine-coated-HDPE" pipe; and b) impact of biofilm mobilisation from each surface (control and coated) on water quality (WP2). In parallel, an established marine open-channel testing facility at AkzoNobel will be used to monitor development of natural-vessel-sourced biofilms on the coated-surface prior to a mobilisation phase using a fully turbulent hydrodynamic flow cell, enabling comparison of biofilm behaviour between aquatic systems (WP3). DWDS water quality (various parameters) and biofilms will be sampled regularly for detailed comparisons between performance of the coating and HDPE. Background sampling will be undertaken during the marine-development phase and biofilms will be sampled at the end of the development and mobilisation phases for comparison with DWDS biofilms. Biofilm analysis will combine Flow Cytometry (FC) for microbial cell enumeration (and viability) and Optical Coherence Tomography (OCT) for biofilm volumes and visualisation (WP4). The main deliverable of this project will be the production and dissemination of a final report (WP5). Table 2 highlights key risks associated with this project and their management. UoS and AkzoNobel will direct the project, with DCWW input at steering meetings. Project and steering meetings align with milestones to check work-package progression and act as decision check-points. UoS and AkzoNobel will have regular meetings to ensure timely project completion. KF and MD will be responsible for day-to-day project management for the UoS and AzN parts of the project, respectively. They will report to JB or KR/CP, in-between project progress meetings. Kat Fish rated PI experience as invaluable, supporting her confidence as an early career researcher (POC2 funded (Co-I), PhD with a company, fellowship application). She presented this work at an international conference September 2020, Sweden.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Sheffield: The findings from these experiments suggest that hydraulic regime has a greater effect on biofilm accumulation than the type of pipe coating. Additionally, the first use of OCT to analyse biofilms from cold water DWDS has confirmed that detection is possible, even on thin winter biofilm samples. The marine coating did perform differently to the HDPE during the flushing tests of Steady State biofilms specifically, with the coated surface potentially supporting the release of biofilm cells at lower flow rates/shear stresses. However, further testing is required to assess the performance of the marine coating on thicker biofilms. The background IP within this project rests with AkzoNobel, who have developed the coating (EP2961805B1: Anti-fouling compositions with a fluorinated oxyalkylene-containing polymer or oligomer). All background IP regarding the drinking water test facility and related protocols belongs to the University of Sheffield. The University of Sheffield have freedom to operate within this collaboration and are granted permission to publish findings from the project on the understanding that AkzoNobel will see and approve any outputs prior to their release into the research/public domain. No further IP was generated. They run the test again in autumn 2020 (internal funds and Akzo in kind support, estimated at £38,000 in value), the results are surprising - the coating does not have an impact but hydraulics yes - useful for further research. They will run it again without the coating (Akzo still have a watching brief), as this is an easier solution environmentally. AkzoNobel will continue to run the marine experiments beyond the end date of this project. Depending on completion of the marine tests by the industry partner and the data generated, there may be scope for a further publication, which would be a comparative study of biofilms in the two aquatic environments. Feedback from Kat Fish: Having NBIC hub support was empowering. A platform - a single point - via which she can reach other people. Outreach also important for University - to share her ideas about clean water with school children. Rated PI experience as invaluable, supporting her confidence as an early career researcher (POC2 funded (Co-I), PhD with a company, fellowship application). Presented this research at an international conference ("RISE: Materials in Contact with Drinking Water") September 2020, Sweden. Social benefits: Clean drinking water benefit to the public. Feedback from Welsh Water: - If they could develop the coating that would be of a great benefit in terms of reducing biofilm growth and discoloration - Welsh Water would want AkzoNobel to come to them for testing. - The project run smoothly. Initial issues with getting the right coating but once overcome, it seemed to run very smoothly, lots of communication. Feedback from AkzoNobel: • Successful project, looking into 'how to coat in an environmentally friendly way - shipping is a different field, so cross-functional element. They wanted to gain understanding what involved in an antibiofilm coating, what is going on in drinking water - a new field for the Company. • Methodology - difficulties and practicality (Flow cytometry, imaging - learning how to properly image and how to quantify these images, OCT). They didn't complete objectives in time but as outlined above this work has continued. • Good experience. Moving forward - no immediate plans, at present exploring new markets/products. • Their goal for the POC1 was to explore a new idea, duration only 6 months limiting. They learnt what they needed.
Start Year 2019
 
Description NBIC POC 01POC18035 A model oral system for oral healthcare risk assessment (Paul Stoodley) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution • In partnership with Unilever we have developed a state of the art in vitro model system, based upon FDA approved Centre for Disease Control bioreactors, to simulate the oral cavity and its microbiome to facilitate improved oral healthcare product development. • The bioreactor system is inoculated with human saliva which produces a stable community of oral microbiota on hydroxyapatite coupons within the reactor. Through this model we are able to investigate the changes to the oral microbiome composition caused by the use of active compounds used in oral healthcare. • Many active compounds found in personal care products for oral health are likely to alter the oral microbiome. Perturbations to the oral microbiome may be beneficial or detrimental to oral health. In order to assess the benefits of oral care products we will utilise our in vitro model to determine the impact of perturbations on the oral microbiome on oral health due to active compounds. This will be achieved through state of the art Whole Genome Sequencing (WGS) of oral biofilms and determining the cytokine response from gingival fibroblast cells (GF). • These data will enable the existing 16S-based model of microbiome composition to be expanded to incorporate function. The impact of changes to microbiome composition and function will be related to cellular responses. The ultimate aim is to determine that correlations between oral biofilms and their impact upon GF can be used for product evaluation. • Improved understanding of the impact of actives on the oral cavity will enable product effects to be predicted prior to clinical assessment, thereby reducing industry costs, minimising the safety risks associated with testing new actives and accelerating oral healthcare product development.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The results obtained from 16S rRNA sequencing, cytotoxicity, cytokines analysis indicate the model is functional and has the potential to be used broadly. Due to the challenges encountered during the project, the data generated were insufficient for a publication but the 16S rRNA data of the previous project were analysed and a manuscript which describe the bioreactor prepared for publication. Most studies of biofilm influences on dental materials use single-species biofilms, or consortia. Microcosm biofilms grown directly from saliva or plaque are much more diverse, but difficult to characterize. The CDC biofilm reactor is a continuous-flow culture model that has been deployed to study complex interactions between members of human microbiotas. In this study, we showed that biofilms from the CDC reactors can potentially be used to measure the cytotoxicity and secretion of pro-inflammatory cytokines when challenging human gingival epithelial cells. These methods could be developed further to understand the safety of perturbation of the microbiome by oral care products. The NGS data analyses carried out in this project have been deposited on the ENA (project PRJEB42383) to be made public upon acceptance of the corresponding publication. Next steps: • Validation: The present study was a proof of concept and indicated promising results. It would require further experimental work to test intra batch and batch to batch repeatability. Larger saliva / plaque pools and phylogenetic characterization would allow more replicate and batch runs and identify the presence of species not normally associated with super- or sub-gingival plaque. • The method for exposing gingival cells to biofilm requires further development. Ideally this would be done with the attached biofilm, but this does not allow quantification of biofilm biomass to normalize to cytotoxicity response. • Incorporation into risk assessment framework: SEAC carries out safety risks assessments of new products and with validation and appropriate modelling methods, the results from the in vitro system could be used to define a safe operating space for actives used in oral care. In the absence of established reliable indicators of biome health, a relative risk assessment framework could be defined using actives with a history of safe use such as chlorhexidine and triclosan as benchmarks.
Start Year 2018
 
Description NBIC POC 01POC18035 A model oral system for oral healthcare risk assessment (Paul Stoodley) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution • In partnership with Unilever we have developed a state of the art in vitro model system, based upon FDA approved Centre for Disease Control bioreactors, to simulate the oral cavity and its microbiome to facilitate improved oral healthcare product development. • The bioreactor system is inoculated with human saliva which produces a stable community of oral microbiota on hydroxyapatite coupons within the reactor. Through this model we are able to investigate the changes to the oral microbiome composition caused by the use of active compounds used in oral healthcare. • Many active compounds found in personal care products for oral health are likely to alter the oral microbiome. Perturbations to the oral microbiome may be beneficial or detrimental to oral health. In order to assess the benefits of oral care products we will utilise our in vitro model to determine the impact of perturbations on the oral microbiome on oral health due to active compounds. This will be achieved through state of the art Whole Genome Sequencing (WGS) of oral biofilms and determining the cytokine response from gingival fibroblast cells (GF). • These data will enable the existing 16S-based model of microbiome composition to be expanded to incorporate function. The impact of changes to microbiome composition and function will be related to cellular responses. The ultimate aim is to determine that correlations between oral biofilms and their impact upon GF can be used for product evaluation. • Improved understanding of the impact of actives on the oral cavity will enable product effects to be predicted prior to clinical assessment, thereby reducing industry costs, minimising the safety risks associated with testing new actives and accelerating oral healthcare product development.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The results obtained from 16S rRNA sequencing, cytotoxicity, cytokines analysis indicate the model is functional and has the potential to be used broadly. Due to the challenges encountered during the project, the data generated were insufficient for a publication but the 16S rRNA data of the previous project were analysed and a manuscript which describe the bioreactor prepared for publication. Most studies of biofilm influences on dental materials use single-species biofilms, or consortia. Microcosm biofilms grown directly from saliva or plaque are much more diverse, but difficult to characterize. The CDC biofilm reactor is a continuous-flow culture model that has been deployed to study complex interactions between members of human microbiotas. In this study, we showed that biofilms from the CDC reactors can potentially be used to measure the cytotoxicity and secretion of pro-inflammatory cytokines when challenging human gingival epithelial cells. These methods could be developed further to understand the safety of perturbation of the microbiome by oral care products. The NGS data analyses carried out in this project have been deposited on the ENA (project PRJEB42383) to be made public upon acceptance of the corresponding publication. Next steps: • Validation: The present study was a proof of concept and indicated promising results. It would require further experimental work to test intra batch and batch to batch repeatability. Larger saliva / plaque pools and phylogenetic characterization would allow more replicate and batch runs and identify the presence of species not normally associated with super- or sub-gingival plaque. • The method for exposing gingival cells to biofilm requires further development. Ideally this would be done with the attached biofilm, but this does not allow quantification of biofilm biomass to normalize to cytotoxicity response. • Incorporation into risk assessment framework: SEAC carries out safety risks assessments of new products and with validation and appropriate modelling methods, the results from the in vitro system could be used to define a safe operating space for actives used in oral care. In the absence of established reliable indicators of biome health, a relative risk assessment framework could be defined using actives with a history of safe use such as chlorhexidine and triclosan as benchmarks.
Start Year 2018
 
Description NBIC POC 01POC18035 A model oral system for oral healthcare risk assessment (Paul Stoodley) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution • In partnership with Unilever we have developed a state of the art in vitro model system, based upon FDA approved Centre for Disease Control bioreactors, to simulate the oral cavity and its microbiome to facilitate improved oral healthcare product development. • The bioreactor system is inoculated with human saliva which produces a stable community of oral microbiota on hydroxyapatite coupons within the reactor. Through this model we are able to investigate the changes to the oral microbiome composition caused by the use of active compounds used in oral healthcare. • Many active compounds found in personal care products for oral health are likely to alter the oral microbiome. Perturbations to the oral microbiome may be beneficial or detrimental to oral health. In order to assess the benefits of oral care products we will utilise our in vitro model to determine the impact of perturbations on the oral microbiome on oral health due to active compounds. This will be achieved through state of the art Whole Genome Sequencing (WGS) of oral biofilms and determining the cytokine response from gingival fibroblast cells (GF). • These data will enable the existing 16S-based model of microbiome composition to be expanded to incorporate function. The impact of changes to microbiome composition and function will be related to cellular responses. The ultimate aim is to determine that correlations between oral biofilms and their impact upon GF can be used for product evaluation. • Improved understanding of the impact of actives on the oral cavity will enable product effects to be predicted prior to clinical assessment, thereby reducing industry costs, minimising the safety risks associated with testing new actives and accelerating oral healthcare product development.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The results obtained from 16S rRNA sequencing, cytotoxicity, cytokines analysis indicate the model is functional and has the potential to be used broadly. Due to the challenges encountered during the project, the data generated were insufficient for a publication but the 16S rRNA data of the previous project were analysed and a manuscript which describe the bioreactor prepared for publication. Most studies of biofilm influences on dental materials use single-species biofilms, or consortia. Microcosm biofilms grown directly from saliva or plaque are much more diverse, but difficult to characterize. The CDC biofilm reactor is a continuous-flow culture model that has been deployed to study complex interactions between members of human microbiotas. In this study, we showed that biofilms from the CDC reactors can potentially be used to measure the cytotoxicity and secretion of pro-inflammatory cytokines when challenging human gingival epithelial cells. These methods could be developed further to understand the safety of perturbation of the microbiome by oral care products. The NGS data analyses carried out in this project have been deposited on the ENA (project PRJEB42383) to be made public upon acceptance of the corresponding publication. Next steps: • Validation: The present study was a proof of concept and indicated promising results. It would require further experimental work to test intra batch and batch to batch repeatability. Larger saliva / plaque pools and phylogenetic characterization would allow more replicate and batch runs and identify the presence of species not normally associated with super- or sub-gingival plaque. • The method for exposing gingival cells to biofilm requires further development. Ideally this would be done with the attached biofilm, but this does not allow quantification of biofilm biomass to normalize to cytotoxicity response. • Incorporation into risk assessment framework: SEAC carries out safety risks assessments of new products and with validation and appropriate modelling methods, the results from the in vitro system could be used to define a safe operating space for actives used in oral care. In the absence of established reliable indicators of biome health, a relative risk assessment framework could be defined using actives with a history of safe use such as chlorhexidine and triclosan as benchmarks.
Start Year 2018
 
Description NBIC POC 01POC18040 The effect of low frequency ultrasound on urinary catheter biofilms: a crossover study (Sandra A Wilks) 
Organisation NanoVibronix Inc
Country United States 
Sector Private 
PI Contribution The Nanovibronix Uroshield has been developed to prevent catheter blockages and biofilm contamination, resulting in a reduction in urinary infections (a recognised NHS priority), improved patient outcomes and lower healthcare costs. There are currently no catheter designs, materials or evidence-based interventions that are known to reduce catheter-associated infections. The Uroshield utilises a low frequency ultrasonic acoustic wave to prevent bacterial attachment. Uroshield is the only technology currently available on the market to use this approach. Controlled laboratory studies (carried out by the applicants) are looking at the effects of the device on catheter biofilms using an artificial bladder model. In addition, product evaluation studies in the US and UK have reported increased patient quality of life measures and a reduction in infections and blockages. In the proposed study, we intend to carry out a crossover trial to assess any changes to the catheter-associated microbiome in order to understand the impact of the Uroshield on the biofilm community. This will involve collecting urine and catheter samples pre and post use of the Uroshield from a small panel of long-term catheter users. Using validated techniques, the microbial community structure will be studied and the data used to inform future clinical and laboratory testing, as well as product development. Techniques will include culture and direct microscopy analysis, as well as next generation sequencing to fully investigate the community present in the samples. Understanding how low frequency ultrasonic acoustics can affect microbial communities and biofilms will aid in future products and management strategies. This data will then aid Nanovibronix in further product development, and in NHS Rapid Review and FDA applications, as well as being used as proof of concept data for further NIHR funding.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 01POC18040 The effect of low frequency ultrasound on urinary catheter biofilms: a crossover study (Sandra A Wilks) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The Nanovibronix Uroshield has been developed to prevent catheter blockages and biofilm contamination, resulting in a reduction in urinary infections (a recognised NHS priority), improved patient outcomes and lower healthcare costs. There are currently no catheter designs, materials or evidence-based interventions that are known to reduce catheter-associated infections. The Uroshield utilises a low frequency ultrasonic acoustic wave to prevent bacterial attachment. Uroshield is the only technology currently available on the market to use this approach. Controlled laboratory studies (carried out by the applicants) are looking at the effects of the device on catheter biofilms using an artificial bladder model. In addition, product evaluation studies in the US and UK have reported increased patient quality of life measures and a reduction in infections and blockages. In the proposed study, we intend to carry out a crossover trial to assess any changes to the catheter-associated microbiome in order to understand the impact of the Uroshield on the biofilm community. This will involve collecting urine and catheter samples pre and post use of the Uroshield from a small panel of long-term catheter users. Using validated techniques, the microbial community structure will be studied and the data used to inform future clinical and laboratory testing, as well as product development. Techniques will include culture and direct microscopy analysis, as well as next generation sequencing to fully investigate the community present in the samples. Understanding how low frequency ultrasonic acoustics can affect microbial communities and biofilms will aid in future products and management strategies. This data will then aid Nanovibronix in further product development, and in NHS Rapid Review and FDA applications, as well as being used as proof of concept data for further NIHR funding.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 01POC18040 The effect of low frequency ultrasound on urinary catheter biofilms: a crossover study (Sandra A Wilks) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution The Nanovibronix Uroshield has been developed to prevent catheter blockages and biofilm contamination, resulting in a reduction in urinary infections (a recognised NHS priority), improved patient outcomes and lower healthcare costs. There are currently no catheter designs, materials or evidence-based interventions that are known to reduce catheter-associated infections. The Uroshield utilises a low frequency ultrasonic acoustic wave to prevent bacterial attachment. Uroshield is the only technology currently available on the market to use this approach. Controlled laboratory studies (carried out by the applicants) are looking at the effects of the device on catheter biofilms using an artificial bladder model. In addition, product evaluation studies in the US and UK have reported increased patient quality of life measures and a reduction in infections and blockages. In the proposed study, we intend to carry out a crossover trial to assess any changes to the catheter-associated microbiome in order to understand the impact of the Uroshield on the biofilm community. This will involve collecting urine and catheter samples pre and post use of the Uroshield from a small panel of long-term catheter users. Using validated techniques, the microbial community structure will be studied and the data used to inform future clinical and laboratory testing, as well as product development. Techniques will include culture and direct microscopy analysis, as well as next generation sequencing to fully investigate the community present in the samples. Understanding how low frequency ultrasonic acoustics can affect microbial communities and biofilms will aid in future products and management strategies. This data will then aid Nanovibronix in further product development, and in NHS Rapid Review and FDA applications, as well as being used as proof of concept data for further NIHR funding.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 01POC18044 Low Dose Nitric Oxide for the effective treatment of Chronic Wounds (Bill Keevil) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Microorganisms in the biofilm phenotype are highly tolerant to antibiotics and antimicrobials. This is in part due to the protective nature of the matrix of extracellular polymeric substance, and to the heterogeneous environment including oxygen gradients and metabolically active/inactive sub-populations of bacterial cells. Biofilm development is a dynamic process. Many bacteria transition between planktonic and biofilm growth modes, given the correct environmental cues, biofilm bacteria can undergo coordinated dispersal and reversion to the planktonic form. Previously, we have established that low doses of nitric oxide (NO) are able to induce dispersal of mature P. aeruginosa biofilms in-vitro1,2 and in a small scale clinical study involving cystic fibrosis patients where the dispersal was associated with reduced tolerance to standard antibiotics.2 A small pilot biofilm-targeted RCT explored the dispersal properties of the low-dose NO as an adjunct therapy for antibiotics for cystic fibrosis patients.3 These results support a potential new anti-biofilm strategy utilising NO-releasing compounds in combination with antibiotics to disperse and clear biofilm infections. Work on the molecular mechanism of NO-mediated dispersal has shown that the effect is mediated by decreases in intracellular levels of cyclic-di-GMP.4 The regulation of biofilm formation by c-di-GMP is well established and known to occur across a broad range of bacteria. The dispersal properties of NO have also been observed against an extended spectrum of Gram-positive, Gram-negative and yeast biofilms formed on glass slides.5 This may indicate the mechanism of dispersal by NO is non-specific and therefore applicable to polymicrobial biofilms that exist in chronic wounds. We will conduct translational studies that employ increasingly relevant & challenging substrates i.e. ex-vivo pig skin and human skin equivalents to prove the concept remains viable as a prospective route to treat chronic wounds in humans through improved debridement or as an adjunct therapy to commonly used wound dressings. Barraud N et al. 2006. J Bacteriol. 188(21):7344-53. Howlin RP et al. 2017. Mol Ther. 25(9):2104-2116. https://www.clinicaltrialsregister.eu/ctr-search/search?query=eudract_number:2010-023529-39 Barraud N et al. 2009. J. Bacteriol. 191(23), 7333-42. Barraud N et al. 2009. Microb Biotechnol. 2(3):370-378.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The project objective was to establish the efficacy of low-dose NO to disperse biofilms of wound relevant microbes using highly analogous ex-vivo pig skin and human skin equivalent models. This was achieved, and the project followed the original plan closely, but with some modifications. Biofilms were formed using organism P. aeruginosa in a porcine skin model and an artificially grown human skin model and treated with low doses of NO in the form of SNP. The effect of NO on wound healing in the artificial human skin model was also examined. One of the key challenges within this project was the lengthy optimisation required for the porcine skin model. Following the proposed protocol, published in the journal of Wound Repair and Regeneration, we struggled to replicate the authors results in our initial attempts. Additional time was required to optimise the protocol and ensure adequate and stable biofilm growth on porcine skin. The protocol was successfully optimised with P. aeruginosa, but in the interests of time, a decision was mutually agreed upon part-way through the project to move forward only using P. aeruginosa and to not include use of S. aureus in the model. Work conducted falls under the patent filed by Nicolas Barraud, Jeremy S. Webb, Scott A. Rice and Staffan Kjelleberg, under "Methods and compositions for regulating biofilm development"; EP1899451A1. Future work includes prospective industry collaboration in the form of a longer and more in depth analysis of the impact of NO on human skin and the effects on wound healing the dispersal of wound relevant and biofilm forming microbes.
Start Year 2019
 
Description NBIC POC 01POC18044 Low Dose Nitric Oxide for the effective treatment of Chronic Wounds (Bill Keevil) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Microorganisms in the biofilm phenotype are highly tolerant to antibiotics and antimicrobials. This is in part due to the protective nature of the matrix of extracellular polymeric substance, and to the heterogeneous environment including oxygen gradients and metabolically active/inactive sub-populations of bacterial cells. Biofilm development is a dynamic process. Many bacteria transition between planktonic and biofilm growth modes, given the correct environmental cues, biofilm bacteria can undergo coordinated dispersal and reversion to the planktonic form. Previously, we have established that low doses of nitric oxide (NO) are able to induce dispersal of mature P. aeruginosa biofilms in-vitro1,2 and in a small scale clinical study involving cystic fibrosis patients where the dispersal was associated with reduced tolerance to standard antibiotics.2 A small pilot biofilm-targeted RCT explored the dispersal properties of the low-dose NO as an adjunct therapy for antibiotics for cystic fibrosis patients.3 These results support a potential new anti-biofilm strategy utilising NO-releasing compounds in combination with antibiotics to disperse and clear biofilm infections. Work on the molecular mechanism of NO-mediated dispersal has shown that the effect is mediated by decreases in intracellular levels of cyclic-di-GMP.4 The regulation of biofilm formation by c-di-GMP is well established and known to occur across a broad range of bacteria. The dispersal properties of NO have also been observed against an extended spectrum of Gram-positive, Gram-negative and yeast biofilms formed on glass slides.5 This may indicate the mechanism of dispersal by NO is non-specific and therefore applicable to polymicrobial biofilms that exist in chronic wounds. We will conduct translational studies that employ increasingly relevant & challenging substrates i.e. ex-vivo pig skin and human skin equivalents to prove the concept remains viable as a prospective route to treat chronic wounds in humans through improved debridement or as an adjunct therapy to commonly used wound dressings. Barraud N et al. 2006. J Bacteriol. 188(21):7344-53. Howlin RP et al. 2017. Mol Ther. 25(9):2104-2116. https://www.clinicaltrialsregister.eu/ctr-search/search?query=eudract_number:2010-023529-39 Barraud N et al. 2009. J. Bacteriol. 191(23), 7333-42. Barraud N et al. 2009. Microb Biotechnol. 2(3):370-378.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The project objective was to establish the efficacy of low-dose NO to disperse biofilms of wound relevant microbes using highly analogous ex-vivo pig skin and human skin equivalent models. This was achieved, and the project followed the original plan closely, but with some modifications. Biofilms were formed using organism P. aeruginosa in a porcine skin model and an artificially grown human skin model and treated with low doses of NO in the form of SNP. The effect of NO on wound healing in the artificial human skin model was also examined. One of the key challenges within this project was the lengthy optimisation required for the porcine skin model. Following the proposed protocol, published in the journal of Wound Repair and Regeneration, we struggled to replicate the authors results in our initial attempts. Additional time was required to optimise the protocol and ensure adequate and stable biofilm growth on porcine skin. The protocol was successfully optimised with P. aeruginosa, but in the interests of time, a decision was mutually agreed upon part-way through the project to move forward only using P. aeruginosa and to not include use of S. aureus in the model. Work conducted falls under the patent filed by Nicolas Barraud, Jeremy S. Webb, Scott A. Rice and Staffan Kjelleberg, under "Methods and compositions for regulating biofilm development"; EP1899451A1. Future work includes prospective industry collaboration in the form of a longer and more in depth analysis of the impact of NO on human skin and the effects on wound healing the dispersal of wound relevant and biofilm forming microbes.
Start Year 2019
 
Description NBIC POC 01POC18044 Low Dose Nitric Oxide for the effective treatment of Chronic Wounds (Bill Keevil) 
Organisation Smith and Nephew
Country United Kingdom 
Sector Private 
PI Contribution Microorganisms in the biofilm phenotype are highly tolerant to antibiotics and antimicrobials. This is in part due to the protective nature of the matrix of extracellular polymeric substance, and to the heterogeneous environment including oxygen gradients and metabolically active/inactive sub-populations of bacterial cells. Biofilm development is a dynamic process. Many bacteria transition between planktonic and biofilm growth modes, given the correct environmental cues, biofilm bacteria can undergo coordinated dispersal and reversion to the planktonic form. Previously, we have established that low doses of nitric oxide (NO) are able to induce dispersal of mature P. aeruginosa biofilms in-vitro1,2 and in a small scale clinical study involving cystic fibrosis patients where the dispersal was associated with reduced tolerance to standard antibiotics.2 A small pilot biofilm-targeted RCT explored the dispersal properties of the low-dose NO as an adjunct therapy for antibiotics for cystic fibrosis patients.3 These results support a potential new anti-biofilm strategy utilising NO-releasing compounds in combination with antibiotics to disperse and clear biofilm infections. Work on the molecular mechanism of NO-mediated dispersal has shown that the effect is mediated by decreases in intracellular levels of cyclic-di-GMP.4 The regulation of biofilm formation by c-di-GMP is well established and known to occur across a broad range of bacteria. The dispersal properties of NO have also been observed against an extended spectrum of Gram-positive, Gram-negative and yeast biofilms formed on glass slides.5 This may indicate the mechanism of dispersal by NO is non-specific and therefore applicable to polymicrobial biofilms that exist in chronic wounds. We will conduct translational studies that employ increasingly relevant & challenging substrates i.e. ex-vivo pig skin and human skin equivalents to prove the concept remains viable as a prospective route to treat chronic wounds in humans through improved debridement or as an adjunct therapy to commonly used wound dressings. Barraud N et al. 2006. J Bacteriol. 188(21):7344-53. Howlin RP et al. 2017. Mol Ther. 25(9):2104-2116. https://www.clinicaltrialsregister.eu/ctr-search/search?query=eudract_number:2010-023529-39 Barraud N et al. 2009. J. Bacteriol. 191(23), 7333-42. Barraud N et al. 2009. Microb Biotechnol. 2(3):370-378.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The project objective was to establish the efficacy of low-dose NO to disperse biofilms of wound relevant microbes using highly analogous ex-vivo pig skin and human skin equivalent models. This was achieved, and the project followed the original plan closely, but with some modifications. Biofilms were formed using organism P. aeruginosa in a porcine skin model and an artificially grown human skin model and treated with low doses of NO in the form of SNP. The effect of NO on wound healing in the artificial human skin model was also examined. One of the key challenges within this project was the lengthy optimisation required for the porcine skin model. Following the proposed protocol, published in the journal of Wound Repair and Regeneration, we struggled to replicate the authors results in our initial attempts. Additional time was required to optimise the protocol and ensure adequate and stable biofilm growth on porcine skin. The protocol was successfully optimised with P. aeruginosa, but in the interests of time, a decision was mutually agreed upon part-way through the project to move forward only using P. aeruginosa and to not include use of S. aureus in the model. Work conducted falls under the patent filed by Nicolas Barraud, Jeremy S. Webb, Scott A. Rice and Staffan Kjelleberg, under "Methods and compositions for regulating biofilm development"; EP1899451A1. Future work includes prospective industry collaboration in the form of a longer and more in depth analysis of the impact of NO on human skin and the effects on wound healing the dispersal of wound relevant and biofilm forming microbes.
Start Year 2019
 
Description NBIC POC 01POC18044 Low Dose Nitric Oxide for the effective treatment of Chronic Wounds (Bill Keevil) 
Organisation Smith and Nephew
Country United Kingdom 
Sector Private 
PI Contribution Microorganisms in the biofilm phenotype are highly tolerant to antibiotics and antimicrobials. This is in part due to the protective nature of the matrix of extracellular polymeric substance, and to the heterogeneous environment including oxygen gradients and metabolically active/inactive sub-populations of bacterial cells. Biofilm development is a dynamic process. Many bacteria transition between planktonic and biofilm growth modes, given the correct environmental cues, biofilm bacteria can undergo coordinated dispersal and reversion to the planktonic form. Previously, we have established that low doses of nitric oxide (NO) are able to induce dispersal of mature P. aeruginosa biofilms in-vitro1,2 and in a small scale clinical study involving cystic fibrosis patients where the dispersal was associated with reduced tolerance to standard antibiotics.2 A small pilot biofilm-targeted RCT explored the dispersal properties of the low-dose NO as an adjunct therapy for antibiotics for cystic fibrosis patients.3 These results support a potential new anti-biofilm strategy utilising NO-releasing compounds in combination with antibiotics to disperse and clear biofilm infections. Work on the molecular mechanism of NO-mediated dispersal has shown that the effect is mediated by decreases in intracellular levels of cyclic-di-GMP.4 The regulation of biofilm formation by c-di-GMP is well established and known to occur across a broad range of bacteria. The dispersal properties of NO have also been observed against an extended spectrum of Gram-positive, Gram-negative and yeast biofilms formed on glass slides.5 This may indicate the mechanism of dispersal by NO is non-specific and therefore applicable to polymicrobial biofilms that exist in chronic wounds. We will conduct translational studies that employ increasingly relevant & challenging substrates i.e. ex-vivo pig skin and human skin equivalents to prove the concept remains viable as a prospective route to treat chronic wounds in humans through improved debridement or as an adjunct therapy to commonly used wound dressings. Barraud N et al. 2006. J Bacteriol. 188(21):7344-53. Howlin RP et al. 2017. Mol Ther. 25(9):2104-2116. https://www.clinicaltrialsregister.eu/ctr-search/search?query=eudract_number:2010-023529-39 Barraud N et al. 2009. J. Bacteriol. 191(23), 7333-42. Barraud N et al. 2009. Microb Biotechnol. 2(3):370-378.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The project objective was to establish the efficacy of low-dose NO to disperse biofilms of wound relevant microbes using highly analogous ex-vivo pig skin and human skin equivalent models. This was achieved, and the project followed the original plan closely, but with some modifications. Biofilms were formed using organism P. aeruginosa in a porcine skin model and an artificially grown human skin model and treated with low doses of NO in the form of SNP. The effect of NO on wound healing in the artificial human skin model was also examined. One of the key challenges within this project was the lengthy optimisation required for the porcine skin model. Following the proposed protocol, published in the journal of Wound Repair and Regeneration, we struggled to replicate the authors results in our initial attempts. Additional time was required to optimise the protocol and ensure adequate and stable biofilm growth on porcine skin. The protocol was successfully optimised with P. aeruginosa, but in the interests of time, a decision was mutually agreed upon part-way through the project to move forward only using P. aeruginosa and to not include use of S. aureus in the model. Work conducted falls under the patent filed by Nicolas Barraud, Jeremy S. Webb, Scott A. Rice and Staffan Kjelleberg, under "Methods and compositions for regulating biofilm development"; EP1899451A1. Future work includes prospective industry collaboration in the form of a longer and more in depth analysis of the impact of NO on human skin and the effects on wound healing the dispersal of wound relevant and biofilm forming microbes.
Start Year 2019
 
Description NBIC POC 01POC18044 Low Dose Nitric Oxide for the effective treatment of Chronic Wounds (Bill Keevil) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Microorganisms in the biofilm phenotype are highly tolerant to antibiotics and antimicrobials. This is in part due to the protective nature of the matrix of extracellular polymeric substance, and to the heterogeneous environment including oxygen gradients and metabolically active/inactive sub-populations of bacterial cells. Biofilm development is a dynamic process. Many bacteria transition between planktonic and biofilm growth modes, given the correct environmental cues, biofilm bacteria can undergo coordinated dispersal and reversion to the planktonic form. Previously, we have established that low doses of nitric oxide (NO) are able to induce dispersal of mature P. aeruginosa biofilms in-vitro1,2 and in a small scale clinical study involving cystic fibrosis patients where the dispersal was associated with reduced tolerance to standard antibiotics.2 A small pilot biofilm-targeted RCT explored the dispersal properties of the low-dose NO as an adjunct therapy for antibiotics for cystic fibrosis patients.3 These results support a potential new anti-biofilm strategy utilising NO-releasing compounds in combination with antibiotics to disperse and clear biofilm infections. Work on the molecular mechanism of NO-mediated dispersal has shown that the effect is mediated by decreases in intracellular levels of cyclic-di-GMP.4 The regulation of biofilm formation by c-di-GMP is well established and known to occur across a broad range of bacteria. The dispersal properties of NO have also been observed against an extended spectrum of Gram-positive, Gram-negative and yeast biofilms formed on glass slides.5 This may indicate the mechanism of dispersal by NO is non-specific and therefore applicable to polymicrobial biofilms that exist in chronic wounds. We will conduct translational studies that employ increasingly relevant & challenging substrates i.e. ex-vivo pig skin and human skin equivalents to prove the concept remains viable as a prospective route to treat chronic wounds in humans through improved debridement or as an adjunct therapy to commonly used wound dressings. Barraud N et al. 2006. J Bacteriol. 188(21):7344-53. Howlin RP et al. 2017. Mol Ther. 25(9):2104-2116. https://www.clinicaltrialsregister.eu/ctr-search/search?query=eudract_number:2010-023529-39 Barraud N et al. 2009. J. Bacteriol. 191(23), 7333-42. Barraud N et al. 2009. Microb Biotechnol. 2(3):370-378.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The project objective was to establish the efficacy of low-dose NO to disperse biofilms of wound relevant microbes using highly analogous ex-vivo pig skin and human skin equivalent models. This was achieved, and the project followed the original plan closely, but with some modifications. Biofilms were formed using organism P. aeruginosa in a porcine skin model and an artificially grown human skin model and treated with low doses of NO in the form of SNP. The effect of NO on wound healing in the artificial human skin model was also examined. One of the key challenges within this project was the lengthy optimisation required for the porcine skin model. Following the proposed protocol, published in the journal of Wound Repair and Regeneration, we struggled to replicate the authors results in our initial attempts. Additional time was required to optimise the protocol and ensure adequate and stable biofilm growth on porcine skin. The protocol was successfully optimised with P. aeruginosa, but in the interests of time, a decision was mutually agreed upon part-way through the project to move forward only using P. aeruginosa and to not include use of S. aureus in the model. Work conducted falls under the patent filed by Nicolas Barraud, Jeremy S. Webb, Scott A. Rice and Staffan Kjelleberg, under "Methods and compositions for regulating biofilm development"; EP1899451A1. Future work includes prospective industry collaboration in the form of a longer and more in depth analysis of the impact of NO on human skin and the effects on wound healing the dispersal of wound relevant and biofilm forming microbes.
Start Year 2019
 
Description NBIC POC 01POC18044 Low Dose Nitric Oxide for the effective treatment of Chronic Wounds (Bill Keevil) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Microorganisms in the biofilm phenotype are highly tolerant to antibiotics and antimicrobials. This is in part due to the protective nature of the matrix of extracellular polymeric substance, and to the heterogeneous environment including oxygen gradients and metabolically active/inactive sub-populations of bacterial cells. Biofilm development is a dynamic process. Many bacteria transition between planktonic and biofilm growth modes, given the correct environmental cues, biofilm bacteria can undergo coordinated dispersal and reversion to the planktonic form. Previously, we have established that low doses of nitric oxide (NO) are able to induce dispersal of mature P. aeruginosa biofilms in-vitro1,2 and in a small scale clinical study involving cystic fibrosis patients where the dispersal was associated with reduced tolerance to standard antibiotics.2 A small pilot biofilm-targeted RCT explored the dispersal properties of the low-dose NO as an adjunct therapy for antibiotics for cystic fibrosis patients.3 These results support a potential new anti-biofilm strategy utilising NO-releasing compounds in combination with antibiotics to disperse and clear biofilm infections. Work on the molecular mechanism of NO-mediated dispersal has shown that the effect is mediated by decreases in intracellular levels of cyclic-di-GMP.4 The regulation of biofilm formation by c-di-GMP is well established and known to occur across a broad range of bacteria. The dispersal properties of NO have also been observed against an extended spectrum of Gram-positive, Gram-negative and yeast biofilms formed on glass slides.5 This may indicate the mechanism of dispersal by NO is non-specific and therefore applicable to polymicrobial biofilms that exist in chronic wounds. We will conduct translational studies that employ increasingly relevant & challenging substrates i.e. ex-vivo pig skin and human skin equivalents to prove the concept remains viable as a prospective route to treat chronic wounds in humans through improved debridement or as an adjunct therapy to commonly used wound dressings. Barraud N et al. 2006. J Bacteriol. 188(21):7344-53. Howlin RP et al. 2017. Mol Ther. 25(9):2104-2116. https://www.clinicaltrialsregister.eu/ctr-search/search?query=eudract_number:2010-023529-39 Barraud N et al. 2009. J. Bacteriol. 191(23), 7333-42. Barraud N et al. 2009. Microb Biotechnol. 2(3):370-378.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The project objective was to establish the efficacy of low-dose NO to disperse biofilms of wound relevant microbes using highly analogous ex-vivo pig skin and human skin equivalent models. This was achieved, and the project followed the original plan closely, but with some modifications. Biofilms were formed using organism P. aeruginosa in a porcine skin model and an artificially grown human skin model and treated with low doses of NO in the form of SNP. The effect of NO on wound healing in the artificial human skin model was also examined. One of the key challenges within this project was the lengthy optimisation required for the porcine skin model. Following the proposed protocol, published in the journal of Wound Repair and Regeneration, we struggled to replicate the authors results in our initial attempts. Additional time was required to optimise the protocol and ensure adequate and stable biofilm growth on porcine skin. The protocol was successfully optimised with P. aeruginosa, but in the interests of time, a decision was mutually agreed upon part-way through the project to move forward only using P. aeruginosa and to not include use of S. aureus in the model. Work conducted falls under the patent filed by Nicolas Barraud, Jeremy S. Webb, Scott A. Rice and Staffan Kjelleberg, under "Methods and compositions for regulating biofilm development"; EP1899451A1. Future work includes prospective industry collaboration in the form of a longer and more in depth analysis of the impact of NO on human skin and the effects on wound healing the dispersal of wound relevant and biofilm forming microbes.
Start Year 2019
 
Description NBIC POC 01POC18046 Influence of phosphate dosing to prevent plumbosolvency on biofilm formation in drinking water distribution systems (Isabel Doutelero Soler) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of this project is to facilitate novel research investigating the impact of phosphate dosing and lead leaching on drinking water quality and safety. Phosphate is added to control plumbosolvency and corrosion in metallic pipes hence it is used to protect consumer's health and water quality. Current research is highlighting the essential role of pipe wall microbial biofilms on key processes within Drinking Water Distribution Systems (DWDS), but the impact of phosphate dosing on biofilms remains currently unknown. Considering that biofilms degrade water quality and impact water safety through the potential hosting of undesirable microorganisms, realistic research on biofilm formation in DWDS is essential to understand the factors that influence their development. Currently large amounts of phosphate are dosed into DWDS to control lead-leaching from lead pipes, but there is little information about the surface processes that are involved in the leaching and the interactions with the biofilms in the drinking water pipe networks. iP3Bio is aligning to an initiative from UK Water Research to optimise phosphate dosing for lead control. The focus of that project is on surface chemistry and is ignoring the clearly important role of biofilms in the surface chemistry and phosphate mass balance of the distribution networks. The project therefore aims to provide the understanding of the impact of phosphate dosing on microbial mediated processes within DWDS. This knowledge will aid to determine the relationship between phosphate dosing and depletion on biofilm build-up rates on lead surfaces and inform water industry practices. The success of the project will aid Welsh Water and the UK water industry to optimise chemical doses in DWDS, thus favouring cost effective management and protecting public health. Dr Douterelo will lead the project and be responsible of the management. She is currently holding an EPSRC fellowship and therefore has management experience as PI, additionally she has managed research projects in the area of drinking water research for over 7 years, including working with water industry. The research team in Sheffield will have weekly meetings and monthly teleconferences will be set up with Welsh Water. Project progress will be tracked in a google drive allowing all project contributors overview. The main risks identified are with respect to recruitment, however the project team is aware of several potential candidates within the University of Sheffield who could carry out the role. To further mitigate this risk, the post award and marketing team in the Department of Chemical and Biological Engineering will assist in advertising the post. Another risk identified is delays in procurement. This is mitigated by the combination of field work and lab work where the timings between these can be shifted to ensure continued progress of the work. For the microbial analysis the team have worked with the companies previously and the lessons regarding timing from this is already incorporated into the project plan.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Sheffield: Main Achievements: • Setting up biofilm reactors using different phosphate concentrations and successful one-month trials (in duplicate). • Successful removal of phosphate in drinking water by means of iron pellets. • Successful monitoring of water physico-chemistry and biofilm growth. • Successful DNA extraction and sequencing results for bacteria and fungi communities Dissemination: - Poster: Del Olmo., G, Rosales, E., Jensen, H., Karunakaran, E., and Douterelo, I. (September 2019). Optimisation of phosphate treatment in UK drinking water systems to prevent plumbosolvency: evaluation of its impact on biofilm development on infrastructure surfaces. Poster presented in EuroBiofilms 2019 Conference (Glasgow, UK). - Poster: Rosales, E., Del Olmo, G., Boxall, J., Calero-Preciado, C., Husband, S., and Douterelo, I. (September 2019). Influence of phosphate dosing to prevent plumbosolvency on biofilm formation and risk of mobilisation in an experimental chlorinated Drinking Water Distribution Systems. Poster presented in EuroBiofilms 2019 Conference (Glasgow, UK). - Conference: Isabel Douterelo as a key note speaker, 8th IWA Microbial Ecology and Water Engineering Specialist Conference Japan 2019. - Journal: Del Olmo, Gonzalo, Arslan Ahmad, Henriette Jensen, Esther Karunakaran, Esther Rosales, Carolina Calero Preciado, Paul Gaskin, and Isabel Douterelo. "Influence of phosphate dosing on biofilms development on lead in chlorinated drinking water bioreactors." npj Biofilms and Microbiomes 6, no. 1 (2020): 1-14. (Doi 10.1038/s41522-020-00152-w). Feedback from Isabel Douterelo: - The project provided 'peace of mind', because we didn't know if biofilm was going to grow more after adding phosphate. - The relationship with the company was fine. They were engaged and practical. - Unfortunately unsuccessful in securing additional funding to continue this research by EPSRC. - Progress for the early Career Researcher in the research team, Gonzalo del Olmo is currently working in a Spanish Research institute. - Societal impacts: Better understanding of UK water industry practices and its impacts on water quality and public health. Feedback from Welsh Water: - How did it help them as a company? It helped them to understand what impacts phosphate dosing has on the biofilm community - quite useful. - We have been involved in the submissions of other EPSRC grants related to biofilm studies, which have not been successful. - The relationship with University of Sheffield is fine - they seem to understand what the industry issues are and the water companies as a whole. They've really taken a lead on drinking water supply systems and how they can work to improve them.
Start Year 2019
 
Description NBIC POC 01POC18046 Influence of phosphate dosing to prevent plumbosolvency on biofilm formation in drinking water distribution systems (Isabel Doutelero Soler) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of this project is to facilitate novel research investigating the impact of phosphate dosing and lead leaching on drinking water quality and safety. Phosphate is added to control plumbosolvency and corrosion in metallic pipes hence it is used to protect consumer's health and water quality. Current research is highlighting the essential role of pipe wall microbial biofilms on key processes within Drinking Water Distribution Systems (DWDS), but the impact of phosphate dosing on biofilms remains currently unknown. Considering that biofilms degrade water quality and impact water safety through the potential hosting of undesirable microorganisms, realistic research on biofilm formation in DWDS is essential to understand the factors that influence their development. Currently large amounts of phosphate are dosed into DWDS to control lead-leaching from lead pipes, but there is little information about the surface processes that are involved in the leaching and the interactions with the biofilms in the drinking water pipe networks. iP3Bio is aligning to an initiative from UK Water Research to optimise phosphate dosing for lead control. The focus of that project is on surface chemistry and is ignoring the clearly important role of biofilms in the surface chemistry and phosphate mass balance of the distribution networks. The project therefore aims to provide the understanding of the impact of phosphate dosing on microbial mediated processes within DWDS. This knowledge will aid to determine the relationship between phosphate dosing and depletion on biofilm build-up rates on lead surfaces and inform water industry practices. The success of the project will aid Welsh Water and the UK water industry to optimise chemical doses in DWDS, thus favouring cost effective management and protecting public health. Dr Douterelo will lead the project and be responsible of the management. She is currently holding an EPSRC fellowship and therefore has management experience as PI, additionally she has managed research projects in the area of drinking water research for over 7 years, including working with water industry. The research team in Sheffield will have weekly meetings and monthly teleconferences will be set up with Welsh Water. Project progress will be tracked in a google drive allowing all project contributors overview. The main risks identified are with respect to recruitment, however the project team is aware of several potential candidates within the University of Sheffield who could carry out the role. To further mitigate this risk, the post award and marketing team in the Department of Chemical and Biological Engineering will assist in advertising the post. Another risk identified is delays in procurement. This is mitigated by the combination of field work and lab work where the timings between these can be shifted to ensure continued progress of the work. For the microbial analysis the team have worked with the companies previously and the lessons regarding timing from this is already incorporated into the project plan.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Sheffield: Main Achievements: • Setting up biofilm reactors using different phosphate concentrations and successful one-month trials (in duplicate). • Successful removal of phosphate in drinking water by means of iron pellets. • Successful monitoring of water physico-chemistry and biofilm growth. • Successful DNA extraction and sequencing results for bacteria and fungi communities Dissemination: - Poster: Del Olmo., G, Rosales, E., Jensen, H., Karunakaran, E., and Douterelo, I. (September 2019). Optimisation of phosphate treatment in UK drinking water systems to prevent plumbosolvency: evaluation of its impact on biofilm development on infrastructure surfaces. Poster presented in EuroBiofilms 2019 Conference (Glasgow, UK). - Poster: Rosales, E., Del Olmo, G., Boxall, J., Calero-Preciado, C., Husband, S., and Douterelo, I. (September 2019). Influence of phosphate dosing to prevent plumbosolvency on biofilm formation and risk of mobilisation in an experimental chlorinated Drinking Water Distribution Systems. Poster presented in EuroBiofilms 2019 Conference (Glasgow, UK). - Conference: Isabel Douterelo as a key note speaker, 8th IWA Microbial Ecology and Water Engineering Specialist Conference Japan 2019. - Journal: Del Olmo, Gonzalo, Arslan Ahmad, Henriette Jensen, Esther Karunakaran, Esther Rosales, Carolina Calero Preciado, Paul Gaskin, and Isabel Douterelo. "Influence of phosphate dosing on biofilms development on lead in chlorinated drinking water bioreactors." npj Biofilms and Microbiomes 6, no. 1 (2020): 1-14. (Doi 10.1038/s41522-020-00152-w). Feedback from Isabel Douterelo: - The project provided 'peace of mind', because we didn't know if biofilm was going to grow more after adding phosphate. - The relationship with the company was fine. They were engaged and practical. - Unfortunately unsuccessful in securing additional funding to continue this research by EPSRC. - Progress for the early Career Researcher in the research team, Gonzalo del Olmo is currently working in a Spanish Research institute. - Societal impacts: Better understanding of UK water industry practices and its impacts on water quality and public health. Feedback from Welsh Water: - How did it help them as a company? It helped them to understand what impacts phosphate dosing has on the biofilm community - quite useful. - We have been involved in the submissions of other EPSRC grants related to biofilm studies, which have not been successful. - The relationship with University of Sheffield is fine - they seem to understand what the industry issues are and the water companies as a whole. They've really taken a lead on drinking water supply systems and how they can work to improve them.
Start Year 2019
 
Description NBIC POC 01POC18046 Influence of phosphate dosing to prevent plumbosolvency on biofilm formation in drinking water distribution systems (Isabel Doutelero Soler) 
Organisation Welsh Water
Country United Kingdom 
Sector Private 
PI Contribution The aim of this project is to facilitate novel research investigating the impact of phosphate dosing and lead leaching on drinking water quality and safety. Phosphate is added to control plumbosolvency and corrosion in metallic pipes hence it is used to protect consumer's health and water quality. Current research is highlighting the essential role of pipe wall microbial biofilms on key processes within Drinking Water Distribution Systems (DWDS), but the impact of phosphate dosing on biofilms remains currently unknown. Considering that biofilms degrade water quality and impact water safety through the potential hosting of undesirable microorganisms, realistic research on biofilm formation in DWDS is essential to understand the factors that influence their development. Currently large amounts of phosphate are dosed into DWDS to control lead-leaching from lead pipes, but there is little information about the surface processes that are involved in the leaching and the interactions with the biofilms in the drinking water pipe networks. iP3Bio is aligning to an initiative from UK Water Research to optimise phosphate dosing for lead control. The focus of that project is on surface chemistry and is ignoring the clearly important role of biofilms in the surface chemistry and phosphate mass balance of the distribution networks. The project therefore aims to provide the understanding of the impact of phosphate dosing on microbial mediated processes within DWDS. This knowledge will aid to determine the relationship between phosphate dosing and depletion on biofilm build-up rates on lead surfaces and inform water industry practices. The success of the project will aid Welsh Water and the UK water industry to optimise chemical doses in DWDS, thus favouring cost effective management and protecting public health. Dr Douterelo will lead the project and be responsible of the management. She is currently holding an EPSRC fellowship and therefore has management experience as PI, additionally she has managed research projects in the area of drinking water research for over 7 years, including working with water industry. The research team in Sheffield will have weekly meetings and monthly teleconferences will be set up with Welsh Water. Project progress will be tracked in a google drive allowing all project contributors overview. The main risks identified are with respect to recruitment, however the project team is aware of several potential candidates within the University of Sheffield who could carry out the role. To further mitigate this risk, the post award and marketing team in the Department of Chemical and Biological Engineering will assist in advertising the post. Another risk identified is delays in procurement. This is mitigated by the combination of field work and lab work where the timings between these can be shifted to ensure continued progress of the work. For the microbial analysis the team have worked with the companies previously and the lessons regarding timing from this is already incorporated into the project plan.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Sheffield: Main Achievements: • Setting up biofilm reactors using different phosphate concentrations and successful one-month trials (in duplicate). • Successful removal of phosphate in drinking water by means of iron pellets. • Successful monitoring of water physico-chemistry and biofilm growth. • Successful DNA extraction and sequencing results for bacteria and fungi communities Dissemination: - Poster: Del Olmo., G, Rosales, E., Jensen, H., Karunakaran, E., and Douterelo, I. (September 2019). Optimisation of phosphate treatment in UK drinking water systems to prevent plumbosolvency: evaluation of its impact on biofilm development on infrastructure surfaces. Poster presented in EuroBiofilms 2019 Conference (Glasgow, UK). - Poster: Rosales, E., Del Olmo, G., Boxall, J., Calero-Preciado, C., Husband, S., and Douterelo, I. (September 2019). Influence of phosphate dosing to prevent plumbosolvency on biofilm formation and risk of mobilisation in an experimental chlorinated Drinking Water Distribution Systems. Poster presented in EuroBiofilms 2019 Conference (Glasgow, UK). - Conference: Isabel Douterelo as a key note speaker, 8th IWA Microbial Ecology and Water Engineering Specialist Conference Japan 2019. - Journal: Del Olmo, Gonzalo, Arslan Ahmad, Henriette Jensen, Esther Karunakaran, Esther Rosales, Carolina Calero Preciado, Paul Gaskin, and Isabel Douterelo. "Influence of phosphate dosing on biofilms development on lead in chlorinated drinking water bioreactors." npj Biofilms and Microbiomes 6, no. 1 (2020): 1-14. (Doi 10.1038/s41522-020-00152-w). Feedback from Isabel Douterelo: - The project provided 'peace of mind', because we didn't know if biofilm was going to grow more after adding phosphate. - The relationship with the company was fine. They were engaged and practical. - Unfortunately unsuccessful in securing additional funding to continue this research by EPSRC. - Progress for the early Career Researcher in the research team, Gonzalo del Olmo is currently working in a Spanish Research institute. - Societal impacts: Better understanding of UK water industry practices and its impacts on water quality and public health. Feedback from Welsh Water: - How did it help them as a company? It helped them to understand what impacts phosphate dosing has on the biofilm community - quite useful. - We have been involved in the submissions of other EPSRC grants related to biofilm studies, which have not been successful. - The relationship with University of Sheffield is fine - they seem to understand what the industry issues are and the water companies as a whole. They've really taken a lead on drinking water supply systems and how they can work to improve them.
Start Year 2019
 
Description NBIC POC 01POC18047 Treatment of zinc-contaminated slurry in steel production by BioElectrochemical Systems (Mohamed Mamlouk) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of this project is to develop a sustainable and scalable Bioelectrochemical System (BES) using biofilm and microorganisms for removing zinc from blast furnace (BF) and basic oxygen steelmaking (BOS) slurries produced in the integrated steelmaking process. This process generates large amounts of dust containing high level of iron. It can be recycled and reused as resource of iron. However, the presence of zinc in the dust limits recovery of iron as it could cause severe operational issues. Also the Zn level is too low to be recovered economically by conventional processes. BES is an emerging technology using the capacity of microoganisms to form biofilms and interact with electrodes. BESs have found applications in various areas, particularly waste treatment, pollution treatment and resource recovery from waste. One advantage of BES is harvesting electric energy from waste by biofilm on the anode oxidising organic matter in waste, therefore reducing external energy required for reduction reactions on the cathode, such as metal recovery (e.g. zinc or copper) or chemical production (e.g. H2O2). The objectives and measure of success are: Treatment and removal of organics, such as phenol, in coke oven wastewater by anode biofilm degrading organics with COD removal > 80%, and electricity generation. Bioleaching of zinc and heavy metals from slurry to liquid phase using Fe-oxidising bacteria, > 99% zinc removal from slurry, and removed by BES from leaching solution. Generation of H2O2 to react with Fe to produce OH• (Bioelectro-Fenton) and release zinc from slurry to liquid phase to be removed by BES. Zinc removal of >99% from slurry. Removal and recovery of zinc and heavy metals from Bioleaching/bioelectro-Fenton effluents at the cathode of BES with electrons provided by bioanode, no or low external energy required, zinc final concentration <0.8 ppm within 24 hours.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Newcastle University: What has been achieved: 1. A flexible and versatile BES platform for organic waste degradation. 2. A multi-module BES reactor for metal recovery from industrial wastes. 3. Optimization of the multi-module BES reactor for the recovery of Cu and Zn. 4. Proof of concept-Development of a versatile BES for treating coke oven effluent thus generating electrical energy. The results of the test involving the biodegradation of organics within MFC systems showed that coke oven effluent can be treated with within MFC resulting in significant reduction in COD coupled with current generation. This research also highlights the possibility of selective removal of Zn from steelmaking residue using biological processes starting with bioleaching. Due to the limited amount of time available for this project, only lab scale application of the technique could be developed. More time will be required to improve the overall processes and develop a larger scale system to further highlight the application of this technology. No IP has been generated yet. Future work will complete study to full understand the Zn precipitation process and exploit the possibility of developing a larger scale, pilot system to evaluate the potential of the technology at a larger scale size. Alternative avenues to remove Zn from the leachate will be explored without requiring the cathode pH of >7. The current approach is quite slow.
Start Year 2019
 
Description NBIC POC 01POC18047 Treatment of zinc-contaminated slurry in steel production by BioElectrochemical Systems (Mohamed Mamlouk) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of this project is to develop a sustainable and scalable Bioelectrochemical System (BES) using biofilm and microorganisms for removing zinc from blast furnace (BF) and basic oxygen steelmaking (BOS) slurries produced in the integrated steelmaking process. This process generates large amounts of dust containing high level of iron. It can be recycled and reused as resource of iron. However, the presence of zinc in the dust limits recovery of iron as it could cause severe operational issues. Also the Zn level is too low to be recovered economically by conventional processes. BES is an emerging technology using the capacity of microoganisms to form biofilms and interact with electrodes. BESs have found applications in various areas, particularly waste treatment, pollution treatment and resource recovery from waste. One advantage of BES is harvesting electric energy from waste by biofilm on the anode oxidising organic matter in waste, therefore reducing external energy required for reduction reactions on the cathode, such as metal recovery (e.g. zinc or copper) or chemical production (e.g. H2O2). The objectives and measure of success are: Treatment and removal of organics, such as phenol, in coke oven wastewater by anode biofilm degrading organics with COD removal > 80%, and electricity generation. Bioleaching of zinc and heavy metals from slurry to liquid phase using Fe-oxidising bacteria, > 99% zinc removal from slurry, and removed by BES from leaching solution. Generation of H2O2 to react with Fe to produce OH• (Bioelectro-Fenton) and release zinc from slurry to liquid phase to be removed by BES. Zinc removal of >99% from slurry. Removal and recovery of zinc and heavy metals from Bioleaching/bioelectro-Fenton effluents at the cathode of BES with electrons provided by bioanode, no or low external energy required, zinc final concentration <0.8 ppm within 24 hours.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Newcastle University: What has been achieved: 1. A flexible and versatile BES platform for organic waste degradation. 2. A multi-module BES reactor for metal recovery from industrial wastes. 3. Optimization of the multi-module BES reactor for the recovery of Cu and Zn. 4. Proof of concept-Development of a versatile BES for treating coke oven effluent thus generating electrical energy. The results of the test involving the biodegradation of organics within MFC systems showed that coke oven effluent can be treated with within MFC resulting in significant reduction in COD coupled with current generation. This research also highlights the possibility of selective removal of Zn from steelmaking residue using biological processes starting with bioleaching. Due to the limited amount of time available for this project, only lab scale application of the technique could be developed. More time will be required to improve the overall processes and develop a larger scale system to further highlight the application of this technology. No IP has been generated yet. Future work will complete study to full understand the Zn precipitation process and exploit the possibility of developing a larger scale, pilot system to evaluate the potential of the technology at a larger scale size. Alternative avenues to remove Zn from the leachate will be explored without requiring the cathode pH of >7. The current approach is quite slow.
Start Year 2019
 
Description NBIC POC 01POC18047 Treatment of zinc-contaminated slurry in steel production by BioElectrochemical Systems (Mohamed Mamlouk) 
Organisation Tata Steel Europe
Country United Kingdom 
Sector Private 
PI Contribution The aim of this project is to develop a sustainable and scalable Bioelectrochemical System (BES) using biofilm and microorganisms for removing zinc from blast furnace (BF) and basic oxygen steelmaking (BOS) slurries produced in the integrated steelmaking process. This process generates large amounts of dust containing high level of iron. It can be recycled and reused as resource of iron. However, the presence of zinc in the dust limits recovery of iron as it could cause severe operational issues. Also the Zn level is too low to be recovered economically by conventional processes. BES is an emerging technology using the capacity of microoganisms to form biofilms and interact with electrodes. BESs have found applications in various areas, particularly waste treatment, pollution treatment and resource recovery from waste. One advantage of BES is harvesting electric energy from waste by biofilm on the anode oxidising organic matter in waste, therefore reducing external energy required for reduction reactions on the cathode, such as metal recovery (e.g. zinc or copper) or chemical production (e.g. H2O2). The objectives and measure of success are: Treatment and removal of organics, such as phenol, in coke oven wastewater by anode biofilm degrading organics with COD removal > 80%, and electricity generation. Bioleaching of zinc and heavy metals from slurry to liquid phase using Fe-oxidising bacteria, > 99% zinc removal from slurry, and removed by BES from leaching solution. Generation of H2O2 to react with Fe to produce OH• (Bioelectro-Fenton) and release zinc from slurry to liquid phase to be removed by BES. Zinc removal of >99% from slurry. Removal and recovery of zinc and heavy metals from Bioleaching/bioelectro-Fenton effluents at the cathode of BES with electrons provided by bioanode, no or low external energy required, zinc final concentration <0.8 ppm within 24 hours.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Newcastle University: What has been achieved: 1. A flexible and versatile BES platform for organic waste degradation. 2. A multi-module BES reactor for metal recovery from industrial wastes. 3. Optimization of the multi-module BES reactor for the recovery of Cu and Zn. 4. Proof of concept-Development of a versatile BES for treating coke oven effluent thus generating electrical energy. The results of the test involving the biodegradation of organics within MFC systems showed that coke oven effluent can be treated with within MFC resulting in significant reduction in COD coupled with current generation. This research also highlights the possibility of selective removal of Zn from steelmaking residue using biological processes starting with bioleaching. Due to the limited amount of time available for this project, only lab scale application of the technique could be developed. More time will be required to improve the overall processes and develop a larger scale system to further highlight the application of this technology. No IP has been generated yet. Future work will complete study to full understand the Zn precipitation process and exploit the possibility of developing a larger scale, pilot system to evaluate the potential of the technology at a larger scale size. Alternative avenues to remove Zn from the leachate will be explored without requiring the cathode pH of >7. The current approach is quite slow.
Start Year 2019
 
Description NBIC POC 01POC18049 New generation Colour-encoded Coatings for Surgical tools with intrinsic antimicrobial action (Rasmita Raval) 
Organisation Gencoa
Country United Kingdom 
Sector Private 
PI Contribution 20% of Hospital acquired infections (HAIs) arise from Surgical Site Infections (SSIs). Surgical instruments act as fomites for pathogens of SSIs[1,2], becoming contaminated during surgical procedures via contact with the patient's skin flora or organs and tissues in the body. The development of advanced surgical instruments with an anti-microbial surface that prevents bacterial contamination during surgical processes has the potential to greatly reduce the problem of SSIs. This project aims to drive the development of highly durable antimicrobial surface coatings for surgical tools. The coatings are created using magnetron-sputter physical vapour deposition mastered at Gencoa. Preliminary tests produced Log6 reduction of bacteria at the surface, while delivering a wear-resistant coating able to withstand repeated cleaning cycles. Gencoa have also demonstrated the ability to control colour and lustre, opening the route to creating antimicrobial, colour-coded surgical tools. A market survey commissioned by Gencoa indicates a positive response from NHS professionals towards colour-encoded surgical tools for prompt identification within operating theatres. Therefore, the project will also evaluate the capability to vary the surface colour using different magnetron sputtering processes, while maintaining the antimicrobial performance and durability. To progress this technology, the production method and surface characteristics need to be optimised for antimicrobial, durability and visual performance. This POC project will enable Gencoa's production parameters to be correlated with the detailed surface chemistry, surface structure and antimicrobial performance using Liverpool's advanced surface analysis techniques, alongside antimicrobial testing. A successful POC project will enable Gencoa to optimise the coating process with a view to upscaling for mass production, enabling Gencoa to move into the healthcare sector via future licence deals and/or a spin out venture. References: 1. Saito et al, Am.J.Infection Control, 14 (2014) 43 2. S. Dancer et al, J. Hospital Infection, 81 (2012) 231. The project will be divided in 5 work packages that will alternate iteratively across the coating optimisation process, completing a full iteration cycle every 2 months c.a., thus allowing 3 complete cycles of optimisation within the 6 months of the project.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Liverpool: What we did: - Gencoa's pre-project work had demonstrated the ability to control colour and lustre, opening the route to creating antimicrobial, colour-coded coatings. As part of this project, Gencoa fabricated designed two types of coatings on model substrates. - UoL assessed the topography, chemical composition of two supplied coatings and controls using X-ray Photoelectron Spectroscopy (XPS) and Atomic Force Microscopy (AFM). Bioassays were undertaken with gram +ve and -ve bacteria to assess the antimicrobial performance of the two types of coatings. - Due to COVID, it was not possible to fabricate or assess the third type of coating. Results and conclusions: The XPS data provides a considerable amount of information regarding the relative concentrations of the elements present in the near surface region and the local chemical environments/states of the elements in the two types of coatings. AFM data enabled the surface topography of the coatings to be imaged. Significant differences in surface chemical composition and topography were observed between the two types of coatings. The bioassays showed that both coatings were antimicrobial, but one coating showed log 2 to log3 higher antimicrobial performance compared to the other, showing that this property was tunable. The POC project enabled a new generation of coatings to be created by Gencoa and evaluated by UoL. The combination of advanced coating technology used by Gencoa with advanced characterisation techniques used by UoL enabled differences in antimicrobial performance to be correlated to fabrication conditions and the resultant surface chemistry and topography. The existing IP relating to the proposed project is owned by Gencoa Ltd. Detailed know-how on correlating fabrication conditions to the nature of the surfaces and to their antimicrobial properties was created. Further work: The coatings methodology and know-how developed here formed the basis of two Innovate UK projects submitted by Gencoa, UoL and other partners to develop anti-bacterial and anti-viral coatings for high touch surfaces, thus expanding Gencoa's portfolio of products. Both applications were successful (combined total grant value ~£500K) and work on both projects has commenced.
Start Year 2019
 
Description NBIC POC 01POC18049 New generation Colour-encoded Coatings for Surgical tools with intrinsic antimicrobial action (Rasmita Raval) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution 20% of Hospital acquired infections (HAIs) arise from Surgical Site Infections (SSIs). Surgical instruments act as fomites for pathogens of SSIs[1,2], becoming contaminated during surgical procedures via contact with the patient's skin flora or organs and tissues in the body. The development of advanced surgical instruments with an anti-microbial surface that prevents bacterial contamination during surgical processes has the potential to greatly reduce the problem of SSIs. This project aims to drive the development of highly durable antimicrobial surface coatings for surgical tools. The coatings are created using magnetron-sputter physical vapour deposition mastered at Gencoa. Preliminary tests produced Log6 reduction of bacteria at the surface, while delivering a wear-resistant coating able to withstand repeated cleaning cycles. Gencoa have also demonstrated the ability to control colour and lustre, opening the route to creating antimicrobial, colour-coded surgical tools. A market survey commissioned by Gencoa indicates a positive response from NHS professionals towards colour-encoded surgical tools for prompt identification within operating theatres. Therefore, the project will also evaluate the capability to vary the surface colour using different magnetron sputtering processes, while maintaining the antimicrobial performance and durability. To progress this technology, the production method and surface characteristics need to be optimised for antimicrobial, durability and visual performance. This POC project will enable Gencoa's production parameters to be correlated with the detailed surface chemistry, surface structure and antimicrobial performance using Liverpool's advanced surface analysis techniques, alongside antimicrobial testing. A successful POC project will enable Gencoa to optimise the coating process with a view to upscaling for mass production, enabling Gencoa to move into the healthcare sector via future licence deals and/or a spin out venture. References: 1. Saito et al, Am.J.Infection Control, 14 (2014) 43 2. S. Dancer et al, J. Hospital Infection, 81 (2012) 231. The project will be divided in 5 work packages that will alternate iteratively across the coating optimisation process, completing a full iteration cycle every 2 months c.a., thus allowing 3 complete cycles of optimisation within the 6 months of the project.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Liverpool: What we did: - Gencoa's pre-project work had demonstrated the ability to control colour and lustre, opening the route to creating antimicrobial, colour-coded coatings. As part of this project, Gencoa fabricated designed two types of coatings on model substrates. - UoL assessed the topography, chemical composition of two supplied coatings and controls using X-ray Photoelectron Spectroscopy (XPS) and Atomic Force Microscopy (AFM). Bioassays were undertaken with gram +ve and -ve bacteria to assess the antimicrobial performance of the two types of coatings. - Due to COVID, it was not possible to fabricate or assess the third type of coating. Results and conclusions: The XPS data provides a considerable amount of information regarding the relative concentrations of the elements present in the near surface region and the local chemical environments/states of the elements in the two types of coatings. AFM data enabled the surface topography of the coatings to be imaged. Significant differences in surface chemical composition and topography were observed between the two types of coatings. The bioassays showed that both coatings were antimicrobial, but one coating showed log 2 to log3 higher antimicrobial performance compared to the other, showing that this property was tunable. The POC project enabled a new generation of coatings to be created by Gencoa and evaluated by UoL. The combination of advanced coating technology used by Gencoa with advanced characterisation techniques used by UoL enabled differences in antimicrobial performance to be correlated to fabrication conditions and the resultant surface chemistry and topography. The existing IP relating to the proposed project is owned by Gencoa Ltd. Detailed know-how on correlating fabrication conditions to the nature of the surfaces and to their antimicrobial properties was created. Further work: The coatings methodology and know-how developed here formed the basis of two Innovate UK projects submitted by Gencoa, UoL and other partners to develop anti-bacterial and anti-viral coatings for high touch surfaces, thus expanding Gencoa's portfolio of products. Both applications were successful (combined total grant value ~£500K) and work on both projects has commenced.
Start Year 2019
 
Description NBIC POC 01POC18049 New generation Colour-encoded Coatings for Surgical tools with intrinsic antimicrobial action (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution 20% of Hospital acquired infections (HAIs) arise from Surgical Site Infections (SSIs). Surgical instruments act as fomites for pathogens of SSIs[1,2], becoming contaminated during surgical procedures via contact with the patient's skin flora or organs and tissues in the body. The development of advanced surgical instruments with an anti-microbial surface that prevents bacterial contamination during surgical processes has the potential to greatly reduce the problem of SSIs. This project aims to drive the development of highly durable antimicrobial surface coatings for surgical tools. The coatings are created using magnetron-sputter physical vapour deposition mastered at Gencoa. Preliminary tests produced Log6 reduction of bacteria at the surface, while delivering a wear-resistant coating able to withstand repeated cleaning cycles. Gencoa have also demonstrated the ability to control colour and lustre, opening the route to creating antimicrobial, colour-coded surgical tools. A market survey commissioned by Gencoa indicates a positive response from NHS professionals towards colour-encoded surgical tools for prompt identification within operating theatres. Therefore, the project will also evaluate the capability to vary the surface colour using different magnetron sputtering processes, while maintaining the antimicrobial performance and durability. To progress this technology, the production method and surface characteristics need to be optimised for antimicrobial, durability and visual performance. This POC project will enable Gencoa's production parameters to be correlated with the detailed surface chemistry, surface structure and antimicrobial performance using Liverpool's advanced surface analysis techniques, alongside antimicrobial testing. A successful POC project will enable Gencoa to optimise the coating process with a view to upscaling for mass production, enabling Gencoa to move into the healthcare sector via future licence deals and/or a spin out venture. References: 1. Saito et al, Am.J.Infection Control, 14 (2014) 43 2. S. Dancer et al, J. Hospital Infection, 81 (2012) 231. The project will be divided in 5 work packages that will alternate iteratively across the coating optimisation process, completing a full iteration cycle every 2 months c.a., thus allowing 3 complete cycles of optimisation within the 6 months of the project.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Liverpool: What we did: - Gencoa's pre-project work had demonstrated the ability to control colour and lustre, opening the route to creating antimicrobial, colour-coded coatings. As part of this project, Gencoa fabricated designed two types of coatings on model substrates. - UoL assessed the topography, chemical composition of two supplied coatings and controls using X-ray Photoelectron Spectroscopy (XPS) and Atomic Force Microscopy (AFM). Bioassays were undertaken with gram +ve and -ve bacteria to assess the antimicrobial performance of the two types of coatings. - Due to COVID, it was not possible to fabricate or assess the third type of coating. Results and conclusions: The XPS data provides a considerable amount of information regarding the relative concentrations of the elements present in the near surface region and the local chemical environments/states of the elements in the two types of coatings. AFM data enabled the surface topography of the coatings to be imaged. Significant differences in surface chemical composition and topography were observed between the two types of coatings. The bioassays showed that both coatings were antimicrobial, but one coating showed log 2 to log3 higher antimicrobial performance compared to the other, showing that this property was tunable. The POC project enabled a new generation of coatings to be created by Gencoa and evaluated by UoL. The combination of advanced coating technology used by Gencoa with advanced characterisation techniques used by UoL enabled differences in antimicrobial performance to be correlated to fabrication conditions and the resultant surface chemistry and topography. The existing IP relating to the proposed project is owned by Gencoa Ltd. Detailed know-how on correlating fabrication conditions to the nature of the surfaces and to their antimicrobial properties was created. Further work: The coatings methodology and know-how developed here formed the basis of two Innovate UK projects submitted by Gencoa, UoL and other partners to develop anti-bacterial and anti-viral coatings for high touch surfaces, thus expanding Gencoa's portfolio of products. Both applications were successful (combined total grant value ~£500K) and work on both projects has commenced.
Start Year 2019
 
Description NBIC POC 01POC18050 Development and evaluation of a dual function dressing to combat biofilm infection and exudatein chronic wounds (Andrew McBain) 
Organisation 3M
Country United States 
Sector Private 
PI Contribution Two major clinical challenges in the treatment of chronic wounds are the management of wound exudate and the effective treatment of biofilm-related infections. Commercially available wound dressings are available to absorb exudate from highly exuding wounds and to treat wound biofilm infections; however, there is no commercially available single product, which manages high levels of exudate and effectively treats biofilm infections. To treat infected wounds with high levels of exudate a clinician currently uses two dressings; an anti-microbial dressing and a dressing to manage high exudate levels. The main aim of this project is to assess the anti-biofilm efficacy of a newly developed wound dressing capable of absorbing high levels of exudate. This will facilitate the treatment of wound infection as well as the management of high levels of wound exudate with a single dressing. This will save the clinician time, making their roles easier, and will achieve a cost saving for the NHS. Crawford Healthcare has developed prototypes of a superabsorbent wound dressing with an antimicrobial wound contact layer containing Silver Oxysalts. In vitro and in vivo data has shown Silver Oxysalts to be effective against wound biofilms; however, the effectiveness of the new dressing against wound biofilms has not been assessed. The success of this project will be determined if the anti-biofilm efficacy of the wound dressing is as effective in vitro and in vivo as the combinations of dressings currently used in the clinic. Prototypes of the dressings have already been developed; however, their effectiveness against wound biofilms has not been assessed. The project will be split into three parts. As comparators, dressing combinations currently used in the clinic will be included in all tests. In addition, as negative and positive controls non-antimicrobial superabsorbent dressings and a Silver Oxysalt wound contact layer will be included.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The University of Manchester: - We developed an array of techniques to qualitatively and quantitatively assess the ability of superabsorbent and antimicrobial superabsorbent dressings, to sequester and retain bacteria and thus prevent biofilm formation. The Covid-19 outbreak delayed some of the final experiments on the planktonic phase and prevented the completion of experiments using our established in vivo models. Work instead focused on in vitro models, and a comprehensive dataset was produced. A manuscript at an advanced stage of production. - A webinar was recorded by Wounds International which showcased some of the data. Over 1000 HCP attended the webinar and it is also available on demand. - We developed a series of experiments to benchmark the efficacy of superabsorbent dressings in their ability to absorb, transfer and retain bacteria. We showed that our combined dressing was especially effective at preventing the transfer of any bacteria to agar and minimising the release of viable bacteria. However, we also highlighted clear differences between each superabsorbent dressing in terms of performance in the parameters tested. Given that many of these dressings see clinical use, we highlight the need to carefully consider the appropriate choice of dressing to facilitate timely wound healing and effective wound management. - Other than the data, no specific IPR was generated as a result of this project. - ,This work could be further expanded by investigating the ability of the superabsorbent dressings to prevent biofilm formation using our established in vitro models. Animal studies could then be conducted to investigate the efficacy of a combined dressing in preventing biofilm infection, in vivo. - Successful application for NBIC POC3 to continue related research. NBIC Case study: Two major clinical challenges in the treatment of chronic wounds are the management of wound exudate and the effective treatment of biofilm-related infections. Wound dressings are available to absorb exudate from highly exuding wounds and to treat wound biofilm infections; however, there is no commercially available single product, which collectively addresses both issues. To treat infected wounds with high levels of exudate a clinician currently uses two dressings; an anti-microbial dressing and a dressing to manage high exudate levels. A Proof of Concept (POC) award from NBIC enabled researchers at the University of Manchester, Dr Gurdeep Singh and Professor Andrew McBain to work with Dr Helen Thomason, then Head of Scientific Research for Crawford Healthcare. Crawford Healthcare is a rapidly growing leader in developing innovative wound care and dermatological treatments and was acquired in 2018 by the world's largest wound care company, Acelity L.P. Inc. The main aim of the project was to assess the anti-biofilm efficacy of combining an antimicrobial dressing with a wound dressing, capable of absorbing high levels of exudate, to facilitate the treatment of wound infection and to manage exudate with a single treatment. The project was highly successful, meeting all major aims, and a manuscript is currently in preparation. Science-based technology company 3M completed the acquisition of Acelity L.P. Inc. and its KCI subsidiaries in 2019. NBIC has recently supported the Dr Gurdeep Singh, Professor Andrew McBain and Dr Helen Thomason team to conduct further work on innovative wound care approaches, this time with 3M as the industrial partner. The main aim of the research is to develop an in vivo wound model to assess the effects of biofilm formation and anti-biofilm dressings on single-cell spray-on skin therapy to promote healing. Spray-on skin therapy is a novel and effective way to promote healing of wounds such as burns and venous and diabetic foot ulcers.
Start Year 2018
 
Description NBIC POC 01POC18050 Development and evaluation of a dual function dressing to combat biofilm infection and exudatein chronic wounds (Andrew McBain) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Two major clinical challenges in the treatment of chronic wounds are the management of wound exudate and the effective treatment of biofilm-related infections. Commercially available wound dressings are available to absorb exudate from highly exuding wounds and to treat wound biofilm infections; however, there is no commercially available single product, which manages high levels of exudate and effectively treats biofilm infections. To treat infected wounds with high levels of exudate a clinician currently uses two dressings; an anti-microbial dressing and a dressing to manage high exudate levels. The main aim of this project is to assess the anti-biofilm efficacy of a newly developed wound dressing capable of absorbing high levels of exudate. This will facilitate the treatment of wound infection as well as the management of high levels of wound exudate with a single dressing. This will save the clinician time, making their roles easier, and will achieve a cost saving for the NHS. Crawford Healthcare has developed prototypes of a superabsorbent wound dressing with an antimicrobial wound contact layer containing Silver Oxysalts. In vitro and in vivo data has shown Silver Oxysalts to be effective against wound biofilms; however, the effectiveness of the new dressing against wound biofilms has not been assessed. The success of this project will be determined if the anti-biofilm efficacy of the wound dressing is as effective in vitro and in vivo as the combinations of dressings currently used in the clinic. Prototypes of the dressings have already been developed; however, their effectiveness against wound biofilms has not been assessed. The project will be split into three parts. As comparators, dressing combinations currently used in the clinic will be included in all tests. In addition, as negative and positive controls non-antimicrobial superabsorbent dressings and a Silver Oxysalt wound contact layer will be included.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The University of Manchester: - We developed an array of techniques to qualitatively and quantitatively assess the ability of superabsorbent and antimicrobial superabsorbent dressings, to sequester and retain bacteria and thus prevent biofilm formation. The Covid-19 outbreak delayed some of the final experiments on the planktonic phase and prevented the completion of experiments using our established in vivo models. Work instead focused on in vitro models, and a comprehensive dataset was produced. A manuscript at an advanced stage of production. - A webinar was recorded by Wounds International which showcased some of the data. Over 1000 HCP attended the webinar and it is also available on demand. - We developed a series of experiments to benchmark the efficacy of superabsorbent dressings in their ability to absorb, transfer and retain bacteria. We showed that our combined dressing was especially effective at preventing the transfer of any bacteria to agar and minimising the release of viable bacteria. However, we also highlighted clear differences between each superabsorbent dressing in terms of performance in the parameters tested. Given that many of these dressings see clinical use, we highlight the need to carefully consider the appropriate choice of dressing to facilitate timely wound healing and effective wound management. - Other than the data, no specific IPR was generated as a result of this project. - ,This work could be further expanded by investigating the ability of the superabsorbent dressings to prevent biofilm formation using our established in vitro models. Animal studies could then be conducted to investigate the efficacy of a combined dressing in preventing biofilm infection, in vivo. - Successful application for NBIC POC3 to continue related research. NBIC Case study: Two major clinical challenges in the treatment of chronic wounds are the management of wound exudate and the effective treatment of biofilm-related infections. Wound dressings are available to absorb exudate from highly exuding wounds and to treat wound biofilm infections; however, there is no commercially available single product, which collectively addresses both issues. To treat infected wounds with high levels of exudate a clinician currently uses two dressings; an anti-microbial dressing and a dressing to manage high exudate levels. A Proof of Concept (POC) award from NBIC enabled researchers at the University of Manchester, Dr Gurdeep Singh and Professor Andrew McBain to work with Dr Helen Thomason, then Head of Scientific Research for Crawford Healthcare. Crawford Healthcare is a rapidly growing leader in developing innovative wound care and dermatological treatments and was acquired in 2018 by the world's largest wound care company, Acelity L.P. Inc. The main aim of the project was to assess the anti-biofilm efficacy of combining an antimicrobial dressing with a wound dressing, capable of absorbing high levels of exudate, to facilitate the treatment of wound infection and to manage exudate with a single treatment. The project was highly successful, meeting all major aims, and a manuscript is currently in preparation. Science-based technology company 3M completed the acquisition of Acelity L.P. Inc. and its KCI subsidiaries in 2019. NBIC has recently supported the Dr Gurdeep Singh, Professor Andrew McBain and Dr Helen Thomason team to conduct further work on innovative wound care approaches, this time with 3M as the industrial partner. The main aim of the research is to develop an in vivo wound model to assess the effects of biofilm formation and anti-biofilm dressings on single-cell spray-on skin therapy to promote healing. Spray-on skin therapy is a novel and effective way to promote healing of wounds such as burns and venous and diabetic foot ulcers.
Start Year 2018
 
Description NBIC POC 01POC18050 Development and evaluation of a dual function dressing to combat biofilm infection and exudatein chronic wounds (Andrew McBain) 
Organisation Systagenix Wound Management Manufacturing
Country United Kingdom 
Sector Private 
PI Contribution Two major clinical challenges in the treatment of chronic wounds are the management of wound exudate and the effective treatment of biofilm-related infections. Commercially available wound dressings are available to absorb exudate from highly exuding wounds and to treat wound biofilm infections; however, there is no commercially available single product, which manages high levels of exudate and effectively treats biofilm infections. To treat infected wounds with high levels of exudate a clinician currently uses two dressings; an anti-microbial dressing and a dressing to manage high exudate levels. The main aim of this project is to assess the anti-biofilm efficacy of a newly developed wound dressing capable of absorbing high levels of exudate. This will facilitate the treatment of wound infection as well as the management of high levels of wound exudate with a single dressing. This will save the clinician time, making their roles easier, and will achieve a cost saving for the NHS. Crawford Healthcare has developed prototypes of a superabsorbent wound dressing with an antimicrobial wound contact layer containing Silver Oxysalts. In vitro and in vivo data has shown Silver Oxysalts to be effective against wound biofilms; however, the effectiveness of the new dressing against wound biofilms has not been assessed. The success of this project will be determined if the anti-biofilm efficacy of the wound dressing is as effective in vitro and in vivo as the combinations of dressings currently used in the clinic. Prototypes of the dressings have already been developed; however, their effectiveness against wound biofilms has not been assessed. The project will be split into three parts. As comparators, dressing combinations currently used in the clinic will be included in all tests. In addition, as negative and positive controls non-antimicrobial superabsorbent dressings and a Silver Oxysalt wound contact layer will be included.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The University of Manchester: - We developed an array of techniques to qualitatively and quantitatively assess the ability of superabsorbent and antimicrobial superabsorbent dressings, to sequester and retain bacteria and thus prevent biofilm formation. The Covid-19 outbreak delayed some of the final experiments on the planktonic phase and prevented the completion of experiments using our established in vivo models. Work instead focused on in vitro models, and a comprehensive dataset was produced. A manuscript at an advanced stage of production. - A webinar was recorded by Wounds International which showcased some of the data. Over 1000 HCP attended the webinar and it is also available on demand. - We developed a series of experiments to benchmark the efficacy of superabsorbent dressings in their ability to absorb, transfer and retain bacteria. We showed that our combined dressing was especially effective at preventing the transfer of any bacteria to agar and minimising the release of viable bacteria. However, we also highlighted clear differences between each superabsorbent dressing in terms of performance in the parameters tested. Given that many of these dressings see clinical use, we highlight the need to carefully consider the appropriate choice of dressing to facilitate timely wound healing and effective wound management. - Other than the data, no specific IPR was generated as a result of this project. - ,This work could be further expanded by investigating the ability of the superabsorbent dressings to prevent biofilm formation using our established in vitro models. Animal studies could then be conducted to investigate the efficacy of a combined dressing in preventing biofilm infection, in vivo. - Successful application for NBIC POC3 to continue related research. NBIC Case study: Two major clinical challenges in the treatment of chronic wounds are the management of wound exudate and the effective treatment of biofilm-related infections. Wound dressings are available to absorb exudate from highly exuding wounds and to treat wound biofilm infections; however, there is no commercially available single product, which collectively addresses both issues. To treat infected wounds with high levels of exudate a clinician currently uses two dressings; an anti-microbial dressing and a dressing to manage high exudate levels. A Proof of Concept (POC) award from NBIC enabled researchers at the University of Manchester, Dr Gurdeep Singh and Professor Andrew McBain to work with Dr Helen Thomason, then Head of Scientific Research for Crawford Healthcare. Crawford Healthcare is a rapidly growing leader in developing innovative wound care and dermatological treatments and was acquired in 2018 by the world's largest wound care company, Acelity L.P. Inc. The main aim of the project was to assess the anti-biofilm efficacy of combining an antimicrobial dressing with a wound dressing, capable of absorbing high levels of exudate, to facilitate the treatment of wound infection and to manage exudate with a single treatment. The project was highly successful, meeting all major aims, and a manuscript is currently in preparation. Science-based technology company 3M completed the acquisition of Acelity L.P. Inc. and its KCI subsidiaries in 2019. NBIC has recently supported the Dr Gurdeep Singh, Professor Andrew McBain and Dr Helen Thomason team to conduct further work on innovative wound care approaches, this time with 3M as the industrial partner. The main aim of the research is to develop an in vivo wound model to assess the effects of biofilm formation and anti-biofilm dressings on single-cell spray-on skin therapy to promote healing. Spray-on skin therapy is a novel and effective way to promote healing of wounds such as burns and venous and diabetic foot ulcers.
Start Year 2018
 
Description NBIC POC 01POC18050 Development and evaluation of a dual function dressing to combat biofilm infection and exudatein chronic wounds (Andrew McBain) 
Organisation University of Manchester
Country United Kingdom 
Sector Academic/University 
PI Contribution Two major clinical challenges in the treatment of chronic wounds are the management of wound exudate and the effective treatment of biofilm-related infections. Commercially available wound dressings are available to absorb exudate from highly exuding wounds and to treat wound biofilm infections; however, there is no commercially available single product, which manages high levels of exudate and effectively treats biofilm infections. To treat infected wounds with high levels of exudate a clinician currently uses two dressings; an anti-microbial dressing and a dressing to manage high exudate levels. The main aim of this project is to assess the anti-biofilm efficacy of a newly developed wound dressing capable of absorbing high levels of exudate. This will facilitate the treatment of wound infection as well as the management of high levels of wound exudate with a single dressing. This will save the clinician time, making their roles easier, and will achieve a cost saving for the NHS. Crawford Healthcare has developed prototypes of a superabsorbent wound dressing with an antimicrobial wound contact layer containing Silver Oxysalts. In vitro and in vivo data has shown Silver Oxysalts to be effective against wound biofilms; however, the effectiveness of the new dressing against wound biofilms has not been assessed. The success of this project will be determined if the anti-biofilm efficacy of the wound dressing is as effective in vitro and in vivo as the combinations of dressings currently used in the clinic. Prototypes of the dressings have already been developed; however, their effectiveness against wound biofilms has not been assessed. The project will be split into three parts. As comparators, dressing combinations currently used in the clinic will be included in all tests. In addition, as negative and positive controls non-antimicrobial superabsorbent dressings and a Silver Oxysalt wound contact layer will be included.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The University of Manchester: - We developed an array of techniques to qualitatively and quantitatively assess the ability of superabsorbent and antimicrobial superabsorbent dressings, to sequester and retain bacteria and thus prevent biofilm formation. The Covid-19 outbreak delayed some of the final experiments on the planktonic phase and prevented the completion of experiments using our established in vivo models. Work instead focused on in vitro models, and a comprehensive dataset was produced. A manuscript at an advanced stage of production. - A webinar was recorded by Wounds International which showcased some of the data. Over 1000 HCP attended the webinar and it is also available on demand. - We developed a series of experiments to benchmark the efficacy of superabsorbent dressings in their ability to absorb, transfer and retain bacteria. We showed that our combined dressing was especially effective at preventing the transfer of any bacteria to agar and minimising the release of viable bacteria. However, we also highlighted clear differences between each superabsorbent dressing in terms of performance in the parameters tested. Given that many of these dressings see clinical use, we highlight the need to carefully consider the appropriate choice of dressing to facilitate timely wound healing and effective wound management. - Other than the data, no specific IPR was generated as a result of this project. - ,This work could be further expanded by investigating the ability of the superabsorbent dressings to prevent biofilm formation using our established in vitro models. Animal studies could then be conducted to investigate the efficacy of a combined dressing in preventing biofilm infection, in vivo. - Successful application for NBIC POC3 to continue related research. NBIC Case study: Two major clinical challenges in the treatment of chronic wounds are the management of wound exudate and the effective treatment of biofilm-related infections. Wound dressings are available to absorb exudate from highly exuding wounds and to treat wound biofilm infections; however, there is no commercially available single product, which collectively addresses both issues. To treat infected wounds with high levels of exudate a clinician currently uses two dressings; an anti-microbial dressing and a dressing to manage high exudate levels. A Proof of Concept (POC) award from NBIC enabled researchers at the University of Manchester, Dr Gurdeep Singh and Professor Andrew McBain to work with Dr Helen Thomason, then Head of Scientific Research for Crawford Healthcare. Crawford Healthcare is a rapidly growing leader in developing innovative wound care and dermatological treatments and was acquired in 2018 by the world's largest wound care company, Acelity L.P. Inc. The main aim of the project was to assess the anti-biofilm efficacy of combining an antimicrobial dressing with a wound dressing, capable of absorbing high levels of exudate, to facilitate the treatment of wound infection and to manage exudate with a single treatment. The project was highly successful, meeting all major aims, and a manuscript is currently in preparation. Science-based technology company 3M completed the acquisition of Acelity L.P. Inc. and its KCI subsidiaries in 2019. NBIC has recently supported the Dr Gurdeep Singh, Professor Andrew McBain and Dr Helen Thomason team to conduct further work on innovative wound care approaches, this time with 3M as the industrial partner. The main aim of the research is to develop an in vivo wound model to assess the effects of biofilm formation and anti-biofilm dressings on single-cell spray-on skin therapy to promote healing. Spray-on skin therapy is a novel and effective way to promote healing of wounds such as burns and venous and diabetic foot ulcers.
Start Year 2018
 
Description NBIC POC 01POC18051 Advanced testing platforms to address key performance variables for antimicrobial products on domestic surfaces (Yuri Diaz Fernandez) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The project aims to develop robust testing platforms to evaluate performance under realistic working conditions for two key surface-cleaning products within Unilever portfolio (i.e. laundry liquid and gel-like surface cleanser). The work levers on state-of-the-art surface-sensitive techniques and advanced biological testing recently developed by the Open Innovation Hub for Antimicrobial Surfaces of the University of Liverpool, based on the combination of electron microscopy, Raman spectroscopy, spatially-resolved X-ray Photoelectron Spectroscopy (XPS), and fluorescent microscopy. The holistic approach proposed here will unravel for the first time contributions from chemical and biological soiling on domestic surfaces and correlate these to performance of approved antimicrobial technologies. This PoC funding will set the foundations for longer-term collaborations, based on direct industrial investment from Unilever, and aiming to generate new products able to prevent biofilms on domestic hard and soft surfaces. This is a key strategic interest for Unilever and UoL's OPIHAS and we see this short-term project as a spring-board for more focused and lengthy research activities moving forward. The project will address two of the priority areas of NBIC remit: • Prevention of biofilms. • Detection of underpinning processes during biofilm formation. Initially, we would focus on bacterial attachment-detachment events and the subsequent biofilm formation on stainless steel and ceramic tails, using relevant bacterial species in single strain communities, and subsequently proceed to multi-species consortia. We will use bacterial metataxonomic information obtained from in-homes consumer studies to develop realistic models for surface contamination under domestic scenarios, exploiting additional omics techniques (e.g. transcriptomics, qPCR), to define when bacteria can no longer be considered "physical" particles interacting with surfaces. The influence of surface chemistry and soil characteristics on triggering irreversible attachment on single cells and subsequent biofilms development will be probed using key gene markers relevant to the consumer problems and perceived benefits (e.g. malodour production). The project will be divided in 6 work packages that will alternate and coexist across the 8 months duration of the project. Chemical, physical, and biological characterisation will be performed under clean and soiled conditions, increasing progressively the level of complexity from single bacterial species to co-cultures. A summarised description of key tasks, milestones and deliverables and the estimated timescale is provided below. The project plan will be reviewed every 2 months and managed dynamically, for timely troubleshooting and prioritisation of tasks.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Liverpool: - In the initial stages of the project we tested several coatings from active components from Unilever's portfolio of products, demonstrating suitability of Liverpool's OPIHAS spectroscopic techniques to detect the actives applied on a model surface. This task was particularly challenging, considering the low concentrations of active under working conditions that lay below detection limit for several analytical techniques. From these initial results, a set of active components was selected for further analysis. Subsequently we probe the distribution of these shortlisted actives across the model surface, providing unprecedented data regarding the properties of these coatings. Finally, we performed biological experiments to probe the effect of the coatings on biofilm formation, and to provide new insights regarding the correlation with the chemistry directly at the surface. - The project allowed us to establish an experimental protocol for testing the chemical distribution of active components on surfaces of commercial interest. This chemical information was correlated directly at the surface with biological probing to unravel the effect of the actives on the formation of biofilms. The data generated from this testing platform will inform the design and formulation of new products, to complement other industrial standard efficacy tests and to support new IP claims. The versatility of the approach used here will allow translation into other areas within Liverpool's OPIHAS and Unilever strategic development. - Strategic discussions are in progress to explore new avenues to expand the scope of the research, beyond the PoC project, covering other areas within Unilever and Liverpool's OPIHAS remits. - The results from this PoC work will set the foundations for a joint PhD project, to explore specific areas that the partners have identified as promising opportunities from the preliminary data generated in the PoC stage. - Currently, the data and specific information regarding the project is to be considered commercially sensitive and confidential to share any part of the results in the public domain. The partners may consider, without commitment, to disclose further information once the IP positioning for both partner organisations is protected. - The PI, Yuri Diaz Fernandez, used this project for the basis of his PhD which has since been awarded and Yuri has left the university to take on the role of Science Leader for the Nano area at LGC Group. Feedback from Unilever: - This has not given us any new IP claims, because we already had some proof of concept data ourselves. This expanded the understanding the mechanism of action, this what this piece of research was bout. - Via the PhD there will be opportunity for new IP claims. So again, we were limited with what we could get across to Liverpool with the POC. We already have protected those actives, so we already have IP in that space, have got the measurement to allow more fundamental understanding. - Learning and clarity to be brought to other POC projects.
Start Year 2019
 
Description NBIC POC 01POC18051 Advanced testing platforms to address key performance variables for antimicrobial products on domestic surfaces (Yuri Diaz Fernandez) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution The project aims to develop robust testing platforms to evaluate performance under realistic working conditions for two key surface-cleaning products within Unilever portfolio (i.e. laundry liquid and gel-like surface cleanser). The work levers on state-of-the-art surface-sensitive techniques and advanced biological testing recently developed by the Open Innovation Hub for Antimicrobial Surfaces of the University of Liverpool, based on the combination of electron microscopy, Raman spectroscopy, spatially-resolved X-ray Photoelectron Spectroscopy (XPS), and fluorescent microscopy. The holistic approach proposed here will unravel for the first time contributions from chemical and biological soiling on domestic surfaces and correlate these to performance of approved antimicrobial technologies. This PoC funding will set the foundations for longer-term collaborations, based on direct industrial investment from Unilever, and aiming to generate new products able to prevent biofilms on domestic hard and soft surfaces. This is a key strategic interest for Unilever and UoL's OPIHAS and we see this short-term project as a spring-board for more focused and lengthy research activities moving forward. The project will address two of the priority areas of NBIC remit: • Prevention of biofilms. • Detection of underpinning processes during biofilm formation. Initially, we would focus on bacterial attachment-detachment events and the subsequent biofilm formation on stainless steel and ceramic tails, using relevant bacterial species in single strain communities, and subsequently proceed to multi-species consortia. We will use bacterial metataxonomic information obtained from in-homes consumer studies to develop realistic models for surface contamination under domestic scenarios, exploiting additional omics techniques (e.g. transcriptomics, qPCR), to define when bacteria can no longer be considered "physical" particles interacting with surfaces. The influence of surface chemistry and soil characteristics on triggering irreversible attachment on single cells and subsequent biofilms development will be probed using key gene markers relevant to the consumer problems and perceived benefits (e.g. malodour production). The project will be divided in 6 work packages that will alternate and coexist across the 8 months duration of the project. Chemical, physical, and biological characterisation will be performed under clean and soiled conditions, increasing progressively the level of complexity from single bacterial species to co-cultures. A summarised description of key tasks, milestones and deliverables and the estimated timescale is provided below. The project plan will be reviewed every 2 months and managed dynamically, for timely troubleshooting and prioritisation of tasks.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Liverpool: - In the initial stages of the project we tested several coatings from active components from Unilever's portfolio of products, demonstrating suitability of Liverpool's OPIHAS spectroscopic techniques to detect the actives applied on a model surface. This task was particularly challenging, considering the low concentrations of active under working conditions that lay below detection limit for several analytical techniques. From these initial results, a set of active components was selected for further analysis. Subsequently we probe the distribution of these shortlisted actives across the model surface, providing unprecedented data regarding the properties of these coatings. Finally, we performed biological experiments to probe the effect of the coatings on biofilm formation, and to provide new insights regarding the correlation with the chemistry directly at the surface. - The project allowed us to establish an experimental protocol for testing the chemical distribution of active components on surfaces of commercial interest. This chemical information was correlated directly at the surface with biological probing to unravel the effect of the actives on the formation of biofilms. The data generated from this testing platform will inform the design and formulation of new products, to complement other industrial standard efficacy tests and to support new IP claims. The versatility of the approach used here will allow translation into other areas within Liverpool's OPIHAS and Unilever strategic development. - Strategic discussions are in progress to explore new avenues to expand the scope of the research, beyond the PoC project, covering other areas within Unilever and Liverpool's OPIHAS remits. - The results from this PoC work will set the foundations for a joint PhD project, to explore specific areas that the partners have identified as promising opportunities from the preliminary data generated in the PoC stage. - Currently, the data and specific information regarding the project is to be considered commercially sensitive and confidential to share any part of the results in the public domain. The partners may consider, without commitment, to disclose further information once the IP positioning for both partner organisations is protected. - The PI, Yuri Diaz Fernandez, used this project for the basis of his PhD which has since been awarded and Yuri has left the university to take on the role of Science Leader for the Nano area at LGC Group. Feedback from Unilever: - This has not given us any new IP claims, because we already had some proof of concept data ourselves. This expanded the understanding the mechanism of action, this what this piece of research was bout. - Via the PhD there will be opportunity for new IP claims. So again, we were limited with what we could get across to Liverpool with the POC. We already have protected those actives, so we already have IP in that space, have got the measurement to allow more fundamental understanding. - Learning and clarity to be brought to other POC projects.
Start Year 2019
 
Description NBIC POC 01POC18051 Advanced testing platforms to address key performance variables for antimicrobial products on domestic surfaces (Yuri Diaz Fernandez) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution The project aims to develop robust testing platforms to evaluate performance under realistic working conditions for two key surface-cleaning products within Unilever portfolio (i.e. laundry liquid and gel-like surface cleanser). The work levers on state-of-the-art surface-sensitive techniques and advanced biological testing recently developed by the Open Innovation Hub for Antimicrobial Surfaces of the University of Liverpool, based on the combination of electron microscopy, Raman spectroscopy, spatially-resolved X-ray Photoelectron Spectroscopy (XPS), and fluorescent microscopy. The holistic approach proposed here will unravel for the first time contributions from chemical and biological soiling on domestic surfaces and correlate these to performance of approved antimicrobial technologies. This PoC funding will set the foundations for longer-term collaborations, based on direct industrial investment from Unilever, and aiming to generate new products able to prevent biofilms on domestic hard and soft surfaces. This is a key strategic interest for Unilever and UoL's OPIHAS and we see this short-term project as a spring-board for more focused and lengthy research activities moving forward. The project will address two of the priority areas of NBIC remit: • Prevention of biofilms. • Detection of underpinning processes during biofilm formation. Initially, we would focus on bacterial attachment-detachment events and the subsequent biofilm formation on stainless steel and ceramic tails, using relevant bacterial species in single strain communities, and subsequently proceed to multi-species consortia. We will use bacterial metataxonomic information obtained from in-homes consumer studies to develop realistic models for surface contamination under domestic scenarios, exploiting additional omics techniques (e.g. transcriptomics, qPCR), to define when bacteria can no longer be considered "physical" particles interacting with surfaces. The influence of surface chemistry and soil characteristics on triggering irreversible attachment on single cells and subsequent biofilms development will be probed using key gene markers relevant to the consumer problems and perceived benefits (e.g. malodour production). The project will be divided in 6 work packages that will alternate and coexist across the 8 months duration of the project. Chemical, physical, and biological characterisation will be performed under clean and soiled conditions, increasing progressively the level of complexity from single bacterial species to co-cultures. A summarised description of key tasks, milestones and deliverables and the estimated timescale is provided below. The project plan will be reviewed every 2 months and managed dynamically, for timely troubleshooting and prioritisation of tasks.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Liverpool: - In the initial stages of the project we tested several coatings from active components from Unilever's portfolio of products, demonstrating suitability of Liverpool's OPIHAS spectroscopic techniques to detect the actives applied on a model surface. This task was particularly challenging, considering the low concentrations of active under working conditions that lay below detection limit for several analytical techniques. From these initial results, a set of active components was selected for further analysis. Subsequently we probe the distribution of these shortlisted actives across the model surface, providing unprecedented data regarding the properties of these coatings. Finally, we performed biological experiments to probe the effect of the coatings on biofilm formation, and to provide new insights regarding the correlation with the chemistry directly at the surface. - The project allowed us to establish an experimental protocol for testing the chemical distribution of active components on surfaces of commercial interest. This chemical information was correlated directly at the surface with biological probing to unravel the effect of the actives on the formation of biofilms. The data generated from this testing platform will inform the design and formulation of new products, to complement other industrial standard efficacy tests and to support new IP claims. The versatility of the approach used here will allow translation into other areas within Liverpool's OPIHAS and Unilever strategic development. - Strategic discussions are in progress to explore new avenues to expand the scope of the research, beyond the PoC project, covering other areas within Unilever and Liverpool's OPIHAS remits. - The results from this PoC work will set the foundations for a joint PhD project, to explore specific areas that the partners have identified as promising opportunities from the preliminary data generated in the PoC stage. - Currently, the data and specific information regarding the project is to be considered commercially sensitive and confidential to share any part of the results in the public domain. The partners may consider, without commitment, to disclose further information once the IP positioning for both partner organisations is protected. - The PI, Yuri Diaz Fernandez, used this project for the basis of his PhD which has since been awarded and Yuri has left the university to take on the role of Science Leader for the Nano area at LGC Group. Feedback from Unilever: - This has not given us any new IP claims, because we already had some proof of concept data ourselves. This expanded the understanding the mechanism of action, this what this piece of research was bout. - Via the PhD there will be opportunity for new IP claims. So again, we were limited with what we could get across to Liverpool with the POC. We already have protected those actives, so we already have IP in that space, have got the measurement to allow more fundamental understanding. - Learning and clarity to be brought to other POC projects.
Start Year 2019
 
Description NBIC POC 02POC19024 Commercialisation of a burn wound biofilm model to provide a new service for pre-clinical research and testing in academia and industry. (Brian Jones) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Our overall aim is to commercialise a novel ex-vivo model of burn wound biofilm formation, and ultimately make this widely accessible to academia and industry as a UKAS-accredited service. This will fill an unmet need in providing a robust, reproducible, and representative pre-clinical laboratory model of wound biofilm formation suitable for use in both academic research and industry applications. The availability of this model as a UKAS-accredited service will support pre-clinical development or validation of technologies to detect, prevent, or manage wound biofilms. Such data is vital when compiling regulatory dossiers to support product claims relating to antibiofilm activity. Using ex-vivo porcine skin as the substrate for biofilm formation provides a much more realistic representation of wound biofilms than currently available in-vitro models, in which biofilms are grown on abiotic surfaces. The use of a bespoke tool to generate uniform burn wound arrays on sections of porcine skin permits high-throughput screening of panels of candidate antimicrobial/ antibiofilm agents. The model is also suitable for evaluating wound care products such as dressings. Because the model utilises surplus tissues generated as waste from other sectors (e.g. food industry), this can also contribute to reducing the use of animals in research and product testing. The initial small-scale project proposed here will: • Demonstrate the feasibility of operating this ex-vivo model within an accredited commercial R&D laboratory. • Develop protocols compatible with UKAS accreditation for testing prospective antibiofilm agents. • Develop a portfolio of data to support application to UKAS for accreditation to ISO 17025. To achieve this, we will use the model to compare the antibiofilm activity of a topical antiseptic used in wound care, with candidate antibiofilm agents derived from repurposing of existing drugs. Success will be measured by the implementation of this model at Perfectus and the development of protocols/data to support UKAS accreditation. The project will be divided into 3 work packages (WPs) undertaken at either Bath or Perfectus Biomed. These WPs will support transfer of the burn wound model to Perfectus, and the development of a validated platform that can subsequently be accredited.
Collaborator Contribution The project aims to support Perfectus to commercialise a new burn wound model we have developed. We are providing knowledge and training to the company in set up and operation of the wound model. Perfectus are providing industry expertise and development of ISO protocols.
Impact Feedback from University of Bath: Perfectus Biomed has now applied to UKAS for accreditation of the wound model. It is anticipated that the decision on this will be returned in ~2-3 months. Once accredited Perfectus will offer the model as a new service, and are speaking to clients ahead of official accreditation to make them aware this model will be available soon. When accredited Perfectus will launch the service on their website and create a social media campaign to promote this. It is expected that the University of Bath media relations department will also publicise this. We have constructed new bespoke burn wound tools and provided training to the company. Perfectus are in the process of optimising the wound model in house.
Start Year 2019
 
Description NBIC POC 02POC19024 Commercialisation of a burn wound biofilm model to provide a new service for pre-clinical research and testing in academia and industry. (Brian Jones) 
Organisation Perfectus Biomed Ltd.
Country United Kingdom 
Sector Private 
PI Contribution Our overall aim is to commercialise a novel ex-vivo model of burn wound biofilm formation, and ultimately make this widely accessible to academia and industry as a UKAS-accredited service. This will fill an unmet need in providing a robust, reproducible, and representative pre-clinical laboratory model of wound biofilm formation suitable for use in both academic research and industry applications. The availability of this model as a UKAS-accredited service will support pre-clinical development or validation of technologies to detect, prevent, or manage wound biofilms. Such data is vital when compiling regulatory dossiers to support product claims relating to antibiofilm activity. Using ex-vivo porcine skin as the substrate for biofilm formation provides a much more realistic representation of wound biofilms than currently available in-vitro models, in which biofilms are grown on abiotic surfaces. The use of a bespoke tool to generate uniform burn wound arrays on sections of porcine skin permits high-throughput screening of panels of candidate antimicrobial/ antibiofilm agents. The model is also suitable for evaluating wound care products such as dressings. Because the model utilises surplus tissues generated as waste from other sectors (e.g. food industry), this can also contribute to reducing the use of animals in research and product testing. The initial small-scale project proposed here will: • Demonstrate the feasibility of operating this ex-vivo model within an accredited commercial R&D laboratory. • Develop protocols compatible with UKAS accreditation for testing prospective antibiofilm agents. • Develop a portfolio of data to support application to UKAS for accreditation to ISO 17025. To achieve this, we will use the model to compare the antibiofilm activity of a topical antiseptic used in wound care, with candidate antibiofilm agents derived from repurposing of existing drugs. Success will be measured by the implementation of this model at Perfectus and the development of protocols/data to support UKAS accreditation. The project will be divided into 3 work packages (WPs) undertaken at either Bath or Perfectus Biomed. These WPs will support transfer of the burn wound model to Perfectus, and the development of a validated platform that can subsequently be accredited.
Collaborator Contribution The project aims to support Perfectus to commercialise a new burn wound model we have developed. We are providing knowledge and training to the company in set up and operation of the wound model. Perfectus are providing industry expertise and development of ISO protocols.
Impact Feedback from University of Bath: Perfectus Biomed has now applied to UKAS for accreditation of the wound model. It is anticipated that the decision on this will be returned in ~2-3 months. Once accredited Perfectus will offer the model as a new service, and are speaking to clients ahead of official accreditation to make them aware this model will be available soon. When accredited Perfectus will launch the service on their website and create a social media campaign to promote this. It is expected that the University of Bath media relations department will also publicise this. We have constructed new bespoke burn wound tools and provided training to the company. Perfectus are in the process of optimising the wound model in house.
Start Year 2019
 
Description NBIC POC 02POC19024 Commercialisation of a burn wound biofilm model to provide a new service for pre-clinical research and testing in academia and industry. (Brian Jones) 
Organisation University of Bath
Country United Kingdom 
Sector Academic/University 
PI Contribution Our overall aim is to commercialise a novel ex-vivo model of burn wound biofilm formation, and ultimately make this widely accessible to academia and industry as a UKAS-accredited service. This will fill an unmet need in providing a robust, reproducible, and representative pre-clinical laboratory model of wound biofilm formation suitable for use in both academic research and industry applications. The availability of this model as a UKAS-accredited service will support pre-clinical development or validation of technologies to detect, prevent, or manage wound biofilms. Such data is vital when compiling regulatory dossiers to support product claims relating to antibiofilm activity. Using ex-vivo porcine skin as the substrate for biofilm formation provides a much more realistic representation of wound biofilms than currently available in-vitro models, in which biofilms are grown on abiotic surfaces. The use of a bespoke tool to generate uniform burn wound arrays on sections of porcine skin permits high-throughput screening of panels of candidate antimicrobial/ antibiofilm agents. The model is also suitable for evaluating wound care products such as dressings. Because the model utilises surplus tissues generated as waste from other sectors (e.g. food industry), this can also contribute to reducing the use of animals in research and product testing. The initial small-scale project proposed here will: • Demonstrate the feasibility of operating this ex-vivo model within an accredited commercial R&D laboratory. • Develop protocols compatible with UKAS accreditation for testing prospective antibiofilm agents. • Develop a portfolio of data to support application to UKAS for accreditation to ISO 17025. To achieve this, we will use the model to compare the antibiofilm activity of a topical antiseptic used in wound care, with candidate antibiofilm agents derived from repurposing of existing drugs. Success will be measured by the implementation of this model at Perfectus and the development of protocols/data to support UKAS accreditation. The project will be divided into 3 work packages (WPs) undertaken at either Bath or Perfectus Biomed. These WPs will support transfer of the burn wound model to Perfectus, and the development of a validated platform that can subsequently be accredited.
Collaborator Contribution The project aims to support Perfectus to commercialise a new burn wound model we have developed. We are providing knowledge and training to the company in set up and operation of the wound model. Perfectus are providing industry expertise and development of ISO protocols.
Impact Feedback from University of Bath: Perfectus Biomed has now applied to UKAS for accreditation of the wound model. It is anticipated that the decision on this will be returned in ~2-3 months. Once accredited Perfectus will offer the model as a new service, and are speaking to clients ahead of official accreditation to make them aware this model will be available soon. When accredited Perfectus will launch the service on their website and create a social media campaign to promote this. It is expected that the University of Bath media relations department will also publicise this. We have constructed new bespoke burn wound tools and provided training to the company. Perfectus are in the process of optimising the wound model in house.
Start Year 2019
 
Description NBIC POC 02POC19029 Algae-powered MicroProcessors (Christopher Howe) 
Organisation Arm Limited
Country United Kingdom 
Sector Private 
PI Contribution BACKGROUND Work in the applicant's lab over the last ten years has shown that systems comprising biofilms of photosynthetic microorganisms (algae) on electrodes can generate sufficient power to run small electronic items (e.g. McCormick AJ, et al. (2011) Photosynthetic biofilms in pure culture harness solar energy in a mediator less bio-photovoltaic (BPV) cell system" Energy Environmental Science 4:4699-4709). These power-generating systems are known as biophotovoltaic devices (BPV). Their power density is presently up to 10 mW m-2 (McCormick et al), and BPV offer the possibility of powering low-energy devices in off-grid locations (eg isolated areas in developing countries). Importantly, unlike conventional photovoltaics, they generate power both in the dark (using metabolites from photosynthesis) and in the light, and can be made from more environmentally friendly materials. BPV are therefore an exciting and very beneficial way of utilizing biofilms. In collaboration with Arm, world leaders in microprocessor design, we have shown in preliminary experiments that an algal biofilm can in principle run a low power microprocessor. This offers the exciting prospect of using the biofilms to power some of the billions of devices in the Internet of Things. The BPV device used in the preliminary experiments was too large to be practicable (chamber approx. 250mL). However, our calculations suggest we can scale down to a small chamber containing an electrode of a few sq cm and made of recycled material. This would be much more appropriate for widespread implementation. AIM Proof of concept that • an electrode of a few cm2 can be used to power an ARM Cortex-M0 microprocessor under lab conditions • power generation is stable under outside environmental conditions SUCCESS Will be measured by powering the Cortex-M0 microprocessor in the lab using a biofilm max area 100 cm2, and showing this can also power the Cortex-M0 under outdoor conditions.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Cambridge: - We have successfully powered a microprocessor with photosynthetic (cyanobacterial) cells forming a biofilm in a miniature biophotovoltaic device in lab and uncontrolled conditions. We plan to develop applications for this novel technology. - The main challenge in this project was the COVID19 outbreak, which prevented lab experiments for 1/3 of the total project length. However, by this stage it was appropriate to focus on outdoor experiments. - We have successfully demonstrated that small (75 x 25 x 31 mm) biophotovoltaic devices powered by algal biofilms generate sufficient electricity to power an ARM microprocessor continuously and stably for a period of a month, both in the lab and outdoors. - The construction and use of the BPVs able to operate a microprocessor constitute know-how. The work may be protectable as IP, and we will discuss this with our collaborators. - We expect a joint publication in due course with our collaborators, and we hope to secure further funding to continue the collaboration. - Journal titled 'Powering a microprocessor by photosynthesis' was published in 'Energy & Environmental Science' in May 2022. DOI 10.1039/d2ee00233g
Start Year 2019
 
Description NBIC POC 02POC19029 Algae-powered MicroProcessors (Christopher Howe) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution BACKGROUND Work in the applicant's lab over the last ten years has shown that systems comprising biofilms of photosynthetic microorganisms (algae) on electrodes can generate sufficient power to run small electronic items (e.g. McCormick AJ, et al. (2011) Photosynthetic biofilms in pure culture harness solar energy in a mediator less bio-photovoltaic (BPV) cell system" Energy Environmental Science 4:4699-4709). These power-generating systems are known as biophotovoltaic devices (BPV). Their power density is presently up to 10 mW m-2 (McCormick et al), and BPV offer the possibility of powering low-energy devices in off-grid locations (eg isolated areas in developing countries). Importantly, unlike conventional photovoltaics, they generate power both in the dark (using metabolites from photosynthesis) and in the light, and can be made from more environmentally friendly materials. BPV are therefore an exciting and very beneficial way of utilizing biofilms. In collaboration with Arm, world leaders in microprocessor design, we have shown in preliminary experiments that an algal biofilm can in principle run a low power microprocessor. This offers the exciting prospect of using the biofilms to power some of the billions of devices in the Internet of Things. The BPV device used in the preliminary experiments was too large to be practicable (chamber approx. 250mL). However, our calculations suggest we can scale down to a small chamber containing an electrode of a few sq cm and made of recycled material. This would be much more appropriate for widespread implementation. AIM Proof of concept that • an electrode of a few cm2 can be used to power an ARM Cortex-M0 microprocessor under lab conditions • power generation is stable under outside environmental conditions SUCCESS Will be measured by powering the Cortex-M0 microprocessor in the lab using a biofilm max area 100 cm2, and showing this can also power the Cortex-M0 under outdoor conditions.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Cambridge: - We have successfully powered a microprocessor with photosynthetic (cyanobacterial) cells forming a biofilm in a miniature biophotovoltaic device in lab and uncontrolled conditions. We plan to develop applications for this novel technology. - The main challenge in this project was the COVID19 outbreak, which prevented lab experiments for 1/3 of the total project length. However, by this stage it was appropriate to focus on outdoor experiments. - We have successfully demonstrated that small (75 x 25 x 31 mm) biophotovoltaic devices powered by algal biofilms generate sufficient electricity to power an ARM microprocessor continuously and stably for a period of a month, both in the lab and outdoors. - The construction and use of the BPVs able to operate a microprocessor constitute know-how. The work may be protectable as IP, and we will discuss this with our collaborators. - We expect a joint publication in due course with our collaborators, and we hope to secure further funding to continue the collaboration. - Journal titled 'Powering a microprocessor by photosynthesis' was published in 'Energy & Environmental Science' in May 2022. DOI 10.1039/d2ee00233g
Start Year 2019
 
Description NBIC POC 02POC19029 Algae-powered MicroProcessors (Christopher Howe) 
Organisation University of Cambridge
Country United Kingdom 
Sector Academic/University 
PI Contribution BACKGROUND Work in the applicant's lab over the last ten years has shown that systems comprising biofilms of photosynthetic microorganisms (algae) on electrodes can generate sufficient power to run small electronic items (e.g. McCormick AJ, et al. (2011) Photosynthetic biofilms in pure culture harness solar energy in a mediator less bio-photovoltaic (BPV) cell system" Energy Environmental Science 4:4699-4709). These power-generating systems are known as biophotovoltaic devices (BPV). Their power density is presently up to 10 mW m-2 (McCormick et al), and BPV offer the possibility of powering low-energy devices in off-grid locations (eg isolated areas in developing countries). Importantly, unlike conventional photovoltaics, they generate power both in the dark (using metabolites from photosynthesis) and in the light, and can be made from more environmentally friendly materials. BPV are therefore an exciting and very beneficial way of utilizing biofilms. In collaboration with Arm, world leaders in microprocessor design, we have shown in preliminary experiments that an algal biofilm can in principle run a low power microprocessor. This offers the exciting prospect of using the biofilms to power some of the billions of devices in the Internet of Things. The BPV device used in the preliminary experiments was too large to be practicable (chamber approx. 250mL). However, our calculations suggest we can scale down to a small chamber containing an electrode of a few sq cm and made of recycled material. This would be much more appropriate for widespread implementation. AIM Proof of concept that • an electrode of a few cm2 can be used to power an ARM Cortex-M0 microprocessor under lab conditions • power generation is stable under outside environmental conditions SUCCESS Will be measured by powering the Cortex-M0 microprocessor in the lab using a biofilm max area 100 cm2, and showing this can also power the Cortex-M0 under outdoor conditions.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Cambridge: - We have successfully powered a microprocessor with photosynthetic (cyanobacterial) cells forming a biofilm in a miniature biophotovoltaic device in lab and uncontrolled conditions. We plan to develop applications for this novel technology. - The main challenge in this project was the COVID19 outbreak, which prevented lab experiments for 1/3 of the total project length. However, by this stage it was appropriate to focus on outdoor experiments. - We have successfully demonstrated that small (75 x 25 x 31 mm) biophotovoltaic devices powered by algal biofilms generate sufficient electricity to power an ARM microprocessor continuously and stably for a period of a month, both in the lab and outdoors. - The construction and use of the BPVs able to operate a microprocessor constitute know-how. The work may be protectable as IP, and we will discuss this with our collaborators. - We expect a joint publication in due course with our collaborators, and we hope to secure further funding to continue the collaboration. - Journal titled 'Powering a microprocessor by photosynthesis' was published in 'Energy & Environmental Science' in May 2022. DOI 10.1039/d2ee00233g
Start Year 2019
 
Description NBIC POC 02POC19032 Development of the first ESPRIT-AM antimicrobial self-sealing vascular access graft (Samantha McLean) 
Organisation ESP Technology
Country United Kingdom 
Sector Private 
PI Contribution Due to an aging population and the increasing prevalence of chronic conditions, the number of people requiring implantable devices is growing. The leading cause of failure of implantable medical devices is biofilm infection, which can cause severe complications including reduced device functionality and secondary/systemic infections; both can cause significant trauma for patients. Therefore, development of antimicrobial medical devices that reduce biofilm infection is critical. This is exemplified by current commercially available vascular access graft (VAG) technologies, where no antimicrobial product currently exists. Overarching Aim: Develop standard operating procedures for the production of novel VAG early prototypes coated with antimicrobial levels of silver salts, to evaluate their antibiofilm efficacy compared to currently commercially available ePTFE VAGs and their potential for future commercialisation. This will lay the foundation for future funding applications aimed at development and marketing of antimicrobial VAGs and subsequently other medical devices. ESP Technology has developed a patented formulation and deposition process that makes a microporous perfluoroelastomer (Flexomer) layer on the outside of expanded ePTFE VAG tubes (ESPRIT). The Flexomer significantly reduces post-needle bleeding, a major complication during haemodialysis. This project aims to combine the advancements made by ESP Technology in reduction of post-needle bleeding with the well-documented antimicrobial activity of silver salts; to produce the next generation antimicrobial VAG (ESPRIT-AM). The anti-biofilm activity of the ESPRIT-AM early prototype will be tested against pathogens commonly associated with healthcare-acquired infection and their antimicrobial performance will be compared with commercially available ePTFE VAGs using in vitro medical implant device models. Success of this project will be measured via: • development of standard operating procedures that are able to reliably determine the antimicrobial efficacy of VAG prototypes • generation of preliminary data to demonstrate the potential for commercial development of the ESPRITAM experimentally (TRL2) • production of an early prototype ESPRIT-AM VAG (TRL3). A critical property of any anti-biofilm coating is that it is not toxic to the patient. We will: 1. test tubing manufactured in WP1 for silver salt leaching via inductively coupled plasma optical emission spectrometry to indicate host exposure levels 2. determine compound toxicity to host cells via cytotoxicity testing using simple mammalian cell lines (M3).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Nottingham Trent University: - This project generated a working medical tubing biofilm infection model and produced original research data that is suitable for publication. - Preliminary data produced in this project will be used to support future funding applications and has already been successfully used to secure a PhD studentship to continue this work. The PhD will use preliminary data produced in this project to further develop antimicrobial materials suitable for use in medical implantation. The data produced in this project will be published in due course with additional experiments completed during the PhD studentship. - Due to the uncertainty surrounding our main industrial partner, next steps for the academic partner are to establish new collaborations with industrial partners in the vascular access graft, or similar, field and to engage in further dialogue with the SME on this project in the hope that they are able to re-establish operations after the current COVID restrictions are lifted. - Once industrial collaborators have been identified we will aim to use the models and SOPs developed in this project to submit an Innovate UK Biomedical Catalyst primer application.
Start Year 2020
 
Description NBIC POC 02POC19032 Development of the first ESPRIT-AM antimicrobial self-sealing vascular access graft (Samantha McLean) 
Organisation Harman Technology
Country United Kingdom 
Sector Private 
PI Contribution Due to an aging population and the increasing prevalence of chronic conditions, the number of people requiring implantable devices is growing. The leading cause of failure of implantable medical devices is biofilm infection, which can cause severe complications including reduced device functionality and secondary/systemic infections; both can cause significant trauma for patients. Therefore, development of antimicrobial medical devices that reduce biofilm infection is critical. This is exemplified by current commercially available vascular access graft (VAG) technologies, where no antimicrobial product currently exists. Overarching Aim: Develop standard operating procedures for the production of novel VAG early prototypes coated with antimicrobial levels of silver salts, to evaluate their antibiofilm efficacy compared to currently commercially available ePTFE VAGs and their potential for future commercialisation. This will lay the foundation for future funding applications aimed at development and marketing of antimicrobial VAGs and subsequently other medical devices. ESP Technology has developed a patented formulation and deposition process that makes a microporous perfluoroelastomer (Flexomer) layer on the outside of expanded ePTFE VAG tubes (ESPRIT). The Flexomer significantly reduces post-needle bleeding, a major complication during haemodialysis. This project aims to combine the advancements made by ESP Technology in reduction of post-needle bleeding with the well-documented antimicrobial activity of silver salts; to produce the next generation antimicrobial VAG (ESPRIT-AM). The anti-biofilm activity of the ESPRIT-AM early prototype will be tested against pathogens commonly associated with healthcare-acquired infection and their antimicrobial performance will be compared with commercially available ePTFE VAGs using in vitro medical implant device models. Success of this project will be measured via: • development of standard operating procedures that are able to reliably determine the antimicrobial efficacy of VAG prototypes • generation of preliminary data to demonstrate the potential for commercial development of the ESPRITAM experimentally (TRL2) • production of an early prototype ESPRIT-AM VAG (TRL3). A critical property of any anti-biofilm coating is that it is not toxic to the patient. We will: 1. test tubing manufactured in WP1 for silver salt leaching via inductively coupled plasma optical emission spectrometry to indicate host exposure levels 2. determine compound toxicity to host cells via cytotoxicity testing using simple mammalian cell lines (M3).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Nottingham Trent University: - This project generated a working medical tubing biofilm infection model and produced original research data that is suitable for publication. - Preliminary data produced in this project will be used to support future funding applications and has already been successfully used to secure a PhD studentship to continue this work. The PhD will use preliminary data produced in this project to further develop antimicrobial materials suitable for use in medical implantation. The data produced in this project will be published in due course with additional experiments completed during the PhD studentship. - Due to the uncertainty surrounding our main industrial partner, next steps for the academic partner are to establish new collaborations with industrial partners in the vascular access graft, or similar, field and to engage in further dialogue with the SME on this project in the hope that they are able to re-establish operations after the current COVID restrictions are lifted. - Once industrial collaborators have been identified we will aim to use the models and SOPs developed in this project to submit an Innovate UK Biomedical Catalyst primer application.
Start Year 2020
 
Description NBIC POC 02POC19032 Development of the first ESPRIT-AM antimicrobial self-sealing vascular access graft (Samantha McLean) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Due to an aging population and the increasing prevalence of chronic conditions, the number of people requiring implantable devices is growing. The leading cause of failure of implantable medical devices is biofilm infection, which can cause severe complications including reduced device functionality and secondary/systemic infections; both can cause significant trauma for patients. Therefore, development of antimicrobial medical devices that reduce biofilm infection is critical. This is exemplified by current commercially available vascular access graft (VAG) technologies, where no antimicrobial product currently exists. Overarching Aim: Develop standard operating procedures for the production of novel VAG early prototypes coated with antimicrobial levels of silver salts, to evaluate their antibiofilm efficacy compared to currently commercially available ePTFE VAGs and their potential for future commercialisation. This will lay the foundation for future funding applications aimed at development and marketing of antimicrobial VAGs and subsequently other medical devices. ESP Technology has developed a patented formulation and deposition process that makes a microporous perfluoroelastomer (Flexomer) layer on the outside of expanded ePTFE VAG tubes (ESPRIT). The Flexomer significantly reduces post-needle bleeding, a major complication during haemodialysis. This project aims to combine the advancements made by ESP Technology in reduction of post-needle bleeding with the well-documented antimicrobial activity of silver salts; to produce the next generation antimicrobial VAG (ESPRIT-AM). The anti-biofilm activity of the ESPRIT-AM early prototype will be tested against pathogens commonly associated with healthcare-acquired infection and their antimicrobial performance will be compared with commercially available ePTFE VAGs using in vitro medical implant device models. Success of this project will be measured via: • development of standard operating procedures that are able to reliably determine the antimicrobial efficacy of VAG prototypes • generation of preliminary data to demonstrate the potential for commercial development of the ESPRITAM experimentally (TRL2) • production of an early prototype ESPRIT-AM VAG (TRL3). A critical property of any anti-biofilm coating is that it is not toxic to the patient. We will: 1. test tubing manufactured in WP1 for silver salt leaching via inductively coupled plasma optical emission spectrometry to indicate host exposure levels 2. determine compound toxicity to host cells via cytotoxicity testing using simple mammalian cell lines (M3).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Nottingham Trent University: - This project generated a working medical tubing biofilm infection model and produced original research data that is suitable for publication. - Preliminary data produced in this project will be used to support future funding applications and has already been successfully used to secure a PhD studentship to continue this work. The PhD will use preliminary data produced in this project to further develop antimicrobial materials suitable for use in medical implantation. The data produced in this project will be published in due course with additional experiments completed during the PhD studentship. - Due to the uncertainty surrounding our main industrial partner, next steps for the academic partner are to establish new collaborations with industrial partners in the vascular access graft, or similar, field and to engage in further dialogue with the SME on this project in the hope that they are able to re-establish operations after the current COVID restrictions are lifted. - Once industrial collaborators have been identified we will aim to use the models and SOPs developed in this project to submit an Innovate UK Biomedical Catalyst primer application.
Start Year 2020
 
Description NBIC POC 02POC19032 Development of the first ESPRIT-AM antimicrobial self-sealing vascular access graft (Samantha McLean) 
Organisation Nottingham Trent University
Country United Kingdom 
Sector Academic/University 
PI Contribution Due to an aging population and the increasing prevalence of chronic conditions, the number of people requiring implantable devices is growing. The leading cause of failure of implantable medical devices is biofilm infection, which can cause severe complications including reduced device functionality and secondary/systemic infections; both can cause significant trauma for patients. Therefore, development of antimicrobial medical devices that reduce biofilm infection is critical. This is exemplified by current commercially available vascular access graft (VAG) technologies, where no antimicrobial product currently exists. Overarching Aim: Develop standard operating procedures for the production of novel VAG early prototypes coated with antimicrobial levels of silver salts, to evaluate their antibiofilm efficacy compared to currently commercially available ePTFE VAGs and their potential for future commercialisation. This will lay the foundation for future funding applications aimed at development and marketing of antimicrobial VAGs and subsequently other medical devices. ESP Technology has developed a patented formulation and deposition process that makes a microporous perfluoroelastomer (Flexomer) layer on the outside of expanded ePTFE VAG tubes (ESPRIT). The Flexomer significantly reduces post-needle bleeding, a major complication during haemodialysis. This project aims to combine the advancements made by ESP Technology in reduction of post-needle bleeding with the well-documented antimicrobial activity of silver salts; to produce the next generation antimicrobial VAG (ESPRIT-AM). The anti-biofilm activity of the ESPRIT-AM early prototype will be tested against pathogens commonly associated with healthcare-acquired infection and their antimicrobial performance will be compared with commercially available ePTFE VAGs using in vitro medical implant device models. Success of this project will be measured via: • development of standard operating procedures that are able to reliably determine the antimicrobial efficacy of VAG prototypes • generation of preliminary data to demonstrate the potential for commercial development of the ESPRITAM experimentally (TRL2) • production of an early prototype ESPRIT-AM VAG (TRL3). A critical property of any anti-biofilm coating is that it is not toxic to the patient. We will: 1. test tubing manufactured in WP1 for silver salt leaching via inductively coupled plasma optical emission spectrometry to indicate host exposure levels 2. determine compound toxicity to host cells via cytotoxicity testing using simple mammalian cell lines (M3).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Nottingham Trent University: - This project generated a working medical tubing biofilm infection model and produced original research data that is suitable for publication. - Preliminary data produced in this project will be used to support future funding applications and has already been successfully used to secure a PhD studentship to continue this work. The PhD will use preliminary data produced in this project to further develop antimicrobial materials suitable for use in medical implantation. The data produced in this project will be published in due course with additional experiments completed during the PhD studentship. - Due to the uncertainty surrounding our main industrial partner, next steps for the academic partner are to establish new collaborations with industrial partners in the vascular access graft, or similar, field and to engage in further dialogue with the SME on this project in the hope that they are able to re-establish operations after the current COVID restrictions are lifted. - Once industrial collaborators have been identified we will aim to use the models and SOPs developed in this project to submit an Innovate UK Biomedical Catalyst primer application.
Start Year 2020
 
Description NBIC POC 02POC19033 Enhanced biofilm detection methods and the use of UVC light in their remediation and control on historic buildings and artefacts. (Joy Watts) 
Organisation Historic England
Country United Kingdom 
Sector Public 
PI Contribution The aim of this proposal is to develop better early detection methods and refine the conditions of the UVC treatment regime for different stone and mortar surfaces- creating a set of 'working guidelines' to best control biofilm growth on a range of historic buildings around England. This research builds upon a preliminary collaboration between the partners, UVC was found to be an effective treatment for biofilm control at Newport Roman Villa. To increase sensitivity of biofilm detection on stone, novel methods were trialed, including: ERDAS IMAGINE, a remote sensing software, to map and monitor the intensity and extent of colour change due to biofilms on these surfaces and NIR (near infrared) analysis of biofilm impacted surfaces. Initial results indicate that these tools enabled provided early biofilm detection and provided a rapid and reliable analysis of the effectiveness of UVC. In this study a number of controlled studies will be performed in situ to determine the effectiveness of different UVC treatment conditions in directly controlling biofilms. Simultaneously, biofilms will be subjected to DNA extraction and sequenced using NGS to examine changes in the microbial communities before and after UVC treatment. In combination with ERDAS and NIR spectra from the Newport Villa to determine if chlorophyll and accessory pigment profiles could act as a signature marker for rapid evaluation of biofilm contamination. As a measure of success, SOPs for historic site treatment with UVC, will be developed and disseminated through Historic England's network of conservation professionals.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Portsmouth: - The major aim of this proposal was to develop a set of 'working guidelines' for the use of UV-C for application to harmful biofilms on historic sites. Originally the aims of proposal included a number of field-based trials which due to Covid-19 restrictions were unable to occur. Though final experiments and field testing have been delayed due to Covid-19 and other circumstances, results of completed experiments have enabled the refinement of the methodology of using UV-C to reduce the impact of biofilms on historic buildings. - The major aim of the proposal has been achieved with a set of guidelines now created for Historic England to apply UV-C to historic sites. We have identified a major agent present in stone/mortar decaying biofilms- species of the Leptolynbya genera. We have isolated spectral patterns useful in the determination of treatment efficacy. The time of treatment and wavelength used has been determined using spectral signatures of decline providing a potential risk marker to assay in other substrates. - Further studies are being performed to apply this developed methodology in situ. Two publications are close to completion- the first a technical guidance document which requires the in-field testing that is ongoing and secondly a manuscript detailing the microbial community found in these biofilms and the effects of UV-C on the composition of the microbial community present. Both publications will cite NBIC as a funder of this research. - Feedback to NBIC: We wish to thank NBIC for all of their help, support and understanding during this difficult time.
Start Year 2019
 
Description NBIC POC 02POC19033 Enhanced biofilm detection methods and the use of UVC light in their remediation and control on historic buildings and artefacts. (Joy Watts) 
Organisation Isle of Wight Council
Country United Kingdom 
Sector Public 
PI Contribution The aim of this proposal is to develop better early detection methods and refine the conditions of the UVC treatment regime for different stone and mortar surfaces- creating a set of 'working guidelines' to best control biofilm growth on a range of historic buildings around England. This research builds upon a preliminary collaboration between the partners, UVC was found to be an effective treatment for biofilm control at Newport Roman Villa. To increase sensitivity of biofilm detection on stone, novel methods were trialed, including: ERDAS IMAGINE, a remote sensing software, to map and monitor the intensity and extent of colour change due to biofilms on these surfaces and NIR (near infrared) analysis of biofilm impacted surfaces. Initial results indicate that these tools enabled provided early biofilm detection and provided a rapid and reliable analysis of the effectiveness of UVC. In this study a number of controlled studies will be performed in situ to determine the effectiveness of different UVC treatment conditions in directly controlling biofilms. Simultaneously, biofilms will be subjected to DNA extraction and sequenced using NGS to examine changes in the microbial communities before and after UVC treatment. In combination with ERDAS and NIR spectra from the Newport Villa to determine if chlorophyll and accessory pigment profiles could act as a signature marker for rapid evaluation of biofilm contamination. As a measure of success, SOPs for historic site treatment with UVC, will be developed and disseminated through Historic England's network of conservation professionals.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Portsmouth: - The major aim of this proposal was to develop a set of 'working guidelines' for the use of UV-C for application to harmful biofilms on historic sites. Originally the aims of proposal included a number of field-based trials which due to Covid-19 restrictions were unable to occur. Though final experiments and field testing have been delayed due to Covid-19 and other circumstances, results of completed experiments have enabled the refinement of the methodology of using UV-C to reduce the impact of biofilms on historic buildings. - The major aim of the proposal has been achieved with a set of guidelines now created for Historic England to apply UV-C to historic sites. We have identified a major agent present in stone/mortar decaying biofilms- species of the Leptolynbya genera. We have isolated spectral patterns useful in the determination of treatment efficacy. The time of treatment and wavelength used has been determined using spectral signatures of decline providing a potential risk marker to assay in other substrates. - Further studies are being performed to apply this developed methodology in situ. Two publications are close to completion- the first a technical guidance document which requires the in-field testing that is ongoing and secondly a manuscript detailing the microbial community found in these biofilms and the effects of UV-C on the composition of the microbial community present. Both publications will cite NBIC as a funder of this research. - Feedback to NBIC: We wish to thank NBIC for all of their help, support and understanding during this difficult time.
Start Year 2019
 
Description NBIC POC 02POC19033 Enhanced biofilm detection methods and the use of UVC light in their remediation and control on historic buildings and artefacts. (Joy Watts) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of this proposal is to develop better early detection methods and refine the conditions of the UVC treatment regime for different stone and mortar surfaces- creating a set of 'working guidelines' to best control biofilm growth on a range of historic buildings around England. This research builds upon a preliminary collaboration between the partners, UVC was found to be an effective treatment for biofilm control at Newport Roman Villa. To increase sensitivity of biofilm detection on stone, novel methods were trialed, including: ERDAS IMAGINE, a remote sensing software, to map and monitor the intensity and extent of colour change due to biofilms on these surfaces and NIR (near infrared) analysis of biofilm impacted surfaces. Initial results indicate that these tools enabled provided early biofilm detection and provided a rapid and reliable analysis of the effectiveness of UVC. In this study a number of controlled studies will be performed in situ to determine the effectiveness of different UVC treatment conditions in directly controlling biofilms. Simultaneously, biofilms will be subjected to DNA extraction and sequenced using NGS to examine changes in the microbial communities before and after UVC treatment. In combination with ERDAS and NIR spectra from the Newport Villa to determine if chlorophyll and accessory pigment profiles could act as a signature marker for rapid evaluation of biofilm contamination. As a measure of success, SOPs for historic site treatment with UVC, will be developed and disseminated through Historic England's network of conservation professionals.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Portsmouth: - The major aim of this proposal was to develop a set of 'working guidelines' for the use of UV-C for application to harmful biofilms on historic sites. Originally the aims of proposal included a number of field-based trials which due to Covid-19 restrictions were unable to occur. Though final experiments and field testing have been delayed due to Covid-19 and other circumstances, results of completed experiments have enabled the refinement of the methodology of using UV-C to reduce the impact of biofilms on historic buildings. - The major aim of the proposal has been achieved with a set of guidelines now created for Historic England to apply UV-C to historic sites. We have identified a major agent present in stone/mortar decaying biofilms- species of the Leptolynbya genera. We have isolated spectral patterns useful in the determination of treatment efficacy. The time of treatment and wavelength used has been determined using spectral signatures of decline providing a potential risk marker to assay in other substrates. - Further studies are being performed to apply this developed methodology in situ. Two publications are close to completion- the first a technical guidance document which requires the in-field testing that is ongoing and secondly a manuscript detailing the microbial community found in these biofilms and the effects of UV-C on the composition of the microbial community present. Both publications will cite NBIC as a funder of this research. - Feedback to NBIC: We wish to thank NBIC for all of their help, support and understanding during this difficult time.
Start Year 2019
 
Description NBIC POC 02POC19033 Enhanced biofilm detection methods and the use of UVC light in their remediation and control on historic buildings and artefacts. (Joy Watts) 
Organisation University of Portsmouth
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of this proposal is to develop better early detection methods and refine the conditions of the UVC treatment regime for different stone and mortar surfaces- creating a set of 'working guidelines' to best control biofilm growth on a range of historic buildings around England. This research builds upon a preliminary collaboration between the partners, UVC was found to be an effective treatment for biofilm control at Newport Roman Villa. To increase sensitivity of biofilm detection on stone, novel methods were trialed, including: ERDAS IMAGINE, a remote sensing software, to map and monitor the intensity and extent of colour change due to biofilms on these surfaces and NIR (near infrared) analysis of biofilm impacted surfaces. Initial results indicate that these tools enabled provided early biofilm detection and provided a rapid and reliable analysis of the effectiveness of UVC. In this study a number of controlled studies will be performed in situ to determine the effectiveness of different UVC treatment conditions in directly controlling biofilms. Simultaneously, biofilms will be subjected to DNA extraction and sequenced using NGS to examine changes in the microbial communities before and after UVC treatment. In combination with ERDAS and NIR spectra from the Newport Villa to determine if chlorophyll and accessory pigment profiles could act as a signature marker for rapid evaluation of biofilm contamination. As a measure of success, SOPs for historic site treatment with UVC, will be developed and disseminated through Historic England's network of conservation professionals.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Portsmouth: - The major aim of this proposal was to develop a set of 'working guidelines' for the use of UV-C for application to harmful biofilms on historic sites. Originally the aims of proposal included a number of field-based trials which due to Covid-19 restrictions were unable to occur. Though final experiments and field testing have been delayed due to Covid-19 and other circumstances, results of completed experiments have enabled the refinement of the methodology of using UV-C to reduce the impact of biofilms on historic buildings. - The major aim of the proposal has been achieved with a set of guidelines now created for Historic England to apply UV-C to historic sites. We have identified a major agent present in stone/mortar decaying biofilms- species of the Leptolynbya genera. We have isolated spectral patterns useful in the determination of treatment efficacy. The time of treatment and wavelength used has been determined using spectral signatures of decline providing a potential risk marker to assay in other substrates. - Further studies are being performed to apply this developed methodology in situ. Two publications are close to completion- the first a technical guidance document which requires the in-field testing that is ongoing and secondly a manuscript detailing the microbial community found in these biofilms and the effects of UV-C on the composition of the microbial community present. Both publications will cite NBIC as a funder of this research. - Feedback to NBIC: We wish to thank NBIC for all of their help, support and understanding during this difficult time.
Start Year 2019
 
Description NBIC POC 02POC19034 e-Biofuels from CO2 conversion using Microbial electrosynthesis (Eileen Yu) 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of this project is to develop a sustainable and scalable Bioelectrochemical System (BES) using microbial electrosynthesis (MES) with biofilm and microorganisms and renewable energy to synthesize bio-fuels, such as butanol and hexanol, with high selectivity and efficiency. MES relies on microorganisms as catalysts for reactions occurring at electrodes. The benefit of this approach is to produce target biochemicals with increased carbon efficiency, limited use of additives for redox balance or pH control, enhanced microbial growth, and enhanced product recovery. To achieve the goal, the objectives are: 1) Investigate optimum conditions for electro-active biofilm (for acetate production, acetate is the starting point for longer chain products) development with a gas diffusion electrode (GDE). GDE with improved CO2 mass transfer can achieve fast start up time within 10 days, and acetate concentration >7 g/L. 2) Clarify the role of the electrode (electric energy) in the production of butanol and hexanol when external electron donors are present (bio-electrochemistry vs. electro-fermentation vs. fermentation). Gain understanding on the role of the electrode potentials especially in presence of an external electron donors (formate, ethanol or more generally biomass). 3) Target the specific production of butanol and hexanol via MES, with high selectivity and yield. Optimizing operational conditions such as pH using continuous feeding regime and providing external electron donors other than formate for the developed biocathode. Concentration target 1-5 g/L. 4) Investigate the feasible routes for the production of medium-chain alkanes via combined MES and further biotransformation using engineered microorganisms. Attain evaluation of feasibility of alkane production from various feedstocks with engineered E-coli, and design and implement molecular pathways for alkane production with rational alterations. This project will be managed by Newcastle with input from Shell. Dr Yu will be managing research activities. PI will meet the PDRA regularly to guide and monitor research progress. Research projects will be offered to master students to assist PDRA. Collaboration will take place both virtually and through meetings. A bi-monthly Skype meeting will connect researchers of both institutions to share results, identify research questions and make plans. A final meeting will be organised to evaluate the outputs against the set objectives, and plan for next step and funding applications. The major risk associated with WP 3 is the yield of desired alcohol products not high enough with MES. This can be overcome by adding external electron donors in the form of formate or ethanol, and investigate reactor process mode to remove bioproducts periodically to push the forward reaction of MES. In addition, although the interactions between work packages and tasks is the strength of this approach, each work package can produce important results on its own, which can reduce the risk for the whole project. The risks of failure in each work package are low or medium and will be mitigated by referring to a formal risk register at our monthly Skype meetings. Projects meetings will help track research progress and support decisions on research direction. The overall risk of the project is thus limited which ensures valuable outcomes for Shell.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: Through this project, the main outputs including publications and conference talk [1-3]s. A review paper on synthesis of multicarbon products from CO2 was published in Sustainable Energy and Fuels. • These findings clarify the role of different electron donors in production of medium chain carboxylates from CO2, which need to be taken into consideration for improving the selectivity and, consequently efficiency of microbial electrosynthesis. • These findings of using Formate and ethanol as extra electro donors clarify the role of different electron donors in production of medium chain carboxylates from CO2, which need to be taken into consideration for improving the selectivity and, consequently efficiency of microbial electrosynthesis. It also opens the possibility of using organic waste streams as potential electron donors for MES for integrated system development. • The modification of GDEs with PANI led to a faster start-up of CO2 conversion (6 days vs. 17 days) and a higher production of acetate and butyrate. • Continuous operational mode enhanced acetate production and increased CE from 58% to 83% from fed-batch to continuous operation, respectively; acetate production rate was increase 4-5 folds with continuous mode. pH was also easier to be maintained to the value in favour of MES. • Combination of MES with further biotransformation or Kolbe electrolysis can provide possible route for medium chain alkane synthesis for drop-in fuel production. Through the results from this study, we have secured further funding through UKRI Circular Chemical Economy centre (EP/V011863/1) and BBSRC HVB PoC grant (HVB PoC HVB-2021/01 (Yu)) on "Enhance selectivity for high value bioproducts from CO2 and waste organics through microbial electrosynthesis" with Genome-scale metabolic modelling of microbial communities involved in the MES process can help design experiments to identify complex microbial interactions and community dynamics, as well as parameters controlling community compositions. A new collaboration with industrial partner Argent Energy is currently ongoing with these projects. 8 publications reported: 10.1039/D1SE00861G , 10.1016/j.joule.2020.09.015, 10.1039/d0fd00132e, 10.1016/j.apenergy.2020.116310, 10.1038/s41522-020-00151-x, 10.1016/j.electacta.2021.137853, 10.1016/j.chemosphere.2021.132548; 10.1016/j.scitotenv.2021.145934.
Start Year 2020
 
Description NBIC POC 02POC19034 e-Biofuels from CO2 conversion using Microbial electrosynthesis (Eileen Yu) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of this project is to develop a sustainable and scalable Bioelectrochemical System (BES) using microbial electrosynthesis (MES) with biofilm and microorganisms and renewable energy to synthesize bio-fuels, such as butanol and hexanol, with high selectivity and efficiency. MES relies on microorganisms as catalysts for reactions occurring at electrodes. The benefit of this approach is to produce target biochemicals with increased carbon efficiency, limited use of additives for redox balance or pH control, enhanced microbial growth, and enhanced product recovery. To achieve the goal, the objectives are: 1) Investigate optimum conditions for electro-active biofilm (for acetate production, acetate is the starting point for longer chain products) development with a gas diffusion electrode (GDE). GDE with improved CO2 mass transfer can achieve fast start up time within 10 days, and acetate concentration >7 g/L. 2) Clarify the role of the electrode (electric energy) in the production of butanol and hexanol when external electron donors are present (bio-electrochemistry vs. electro-fermentation vs. fermentation). Gain understanding on the role of the electrode potentials especially in presence of an external electron donors (formate, ethanol or more generally biomass). 3) Target the specific production of butanol and hexanol via MES, with high selectivity and yield. Optimizing operational conditions such as pH using continuous feeding regime and providing external electron donors other than formate for the developed biocathode. Concentration target 1-5 g/L. 4) Investigate the feasible routes for the production of medium-chain alkanes via combined MES and further biotransformation using engineered microorganisms. Attain evaluation of feasibility of alkane production from various feedstocks with engineered E-coli, and design and implement molecular pathways for alkane production with rational alterations. This project will be managed by Newcastle with input from Shell. Dr Yu will be managing research activities. PI will meet the PDRA regularly to guide and monitor research progress. Research projects will be offered to master students to assist PDRA. Collaboration will take place both virtually and through meetings. A bi-monthly Skype meeting will connect researchers of both institutions to share results, identify research questions and make plans. A final meeting will be organised to evaluate the outputs against the set objectives, and plan for next step and funding applications. The major risk associated with WP 3 is the yield of desired alcohol products not high enough with MES. This can be overcome by adding external electron donors in the form of formate or ethanol, and investigate reactor process mode to remove bioproducts periodically to push the forward reaction of MES. In addition, although the interactions between work packages and tasks is the strength of this approach, each work package can produce important results on its own, which can reduce the risk for the whole project. The risks of failure in each work package are low or medium and will be mitigated by referring to a formal risk register at our monthly Skype meetings. Projects meetings will help track research progress and support decisions on research direction. The overall risk of the project is thus limited which ensures valuable outcomes for Shell.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: Through this project, the main outputs including publications and conference talk [1-3]s. A review paper on synthesis of multicarbon products from CO2 was published in Sustainable Energy and Fuels. • These findings clarify the role of different electron donors in production of medium chain carboxylates from CO2, which need to be taken into consideration for improving the selectivity and, consequently efficiency of microbial electrosynthesis. • These findings of using Formate and ethanol as extra electro donors clarify the role of different electron donors in production of medium chain carboxylates from CO2, which need to be taken into consideration for improving the selectivity and, consequently efficiency of microbial electrosynthesis. It also opens the possibility of using organic waste streams as potential electron donors for MES for integrated system development. • The modification of GDEs with PANI led to a faster start-up of CO2 conversion (6 days vs. 17 days) and a higher production of acetate and butyrate. • Continuous operational mode enhanced acetate production and increased CE from 58% to 83% from fed-batch to continuous operation, respectively; acetate production rate was increase 4-5 folds with continuous mode. pH was also easier to be maintained to the value in favour of MES. • Combination of MES with further biotransformation or Kolbe electrolysis can provide possible route for medium chain alkane synthesis for drop-in fuel production. Through the results from this study, we have secured further funding through UKRI Circular Chemical Economy centre (EP/V011863/1) and BBSRC HVB PoC grant (HVB PoC HVB-2021/01 (Yu)) on "Enhance selectivity for high value bioproducts from CO2 and waste organics through microbial electrosynthesis" with Genome-scale metabolic modelling of microbial communities involved in the MES process can help design experiments to identify complex microbial interactions and community dynamics, as well as parameters controlling community compositions. A new collaboration with industrial partner Argent Energy is currently ongoing with these projects. 8 publications reported: 10.1039/D1SE00861G , 10.1016/j.joule.2020.09.015, 10.1039/d0fd00132e, 10.1016/j.apenergy.2020.116310, 10.1038/s41522-020-00151-x, 10.1016/j.electacta.2021.137853, 10.1016/j.chemosphere.2021.132548; 10.1016/j.scitotenv.2021.145934.
Start Year 2020
 
Description NBIC POC 02POC19034 e-Biofuels from CO2 conversion using Microbial electrosynthesis (Eileen Yu) 
Organisation Shell Global Solutions International BV
Department Shell Research Ltd
Country United Kingdom 
Sector Private 
PI Contribution The aim of this project is to develop a sustainable and scalable Bioelectrochemical System (BES) using microbial electrosynthesis (MES) with biofilm and microorganisms and renewable energy to synthesize bio-fuels, such as butanol and hexanol, with high selectivity and efficiency. MES relies on microorganisms as catalysts for reactions occurring at electrodes. The benefit of this approach is to produce target biochemicals with increased carbon efficiency, limited use of additives for redox balance or pH control, enhanced microbial growth, and enhanced product recovery. To achieve the goal, the objectives are: 1) Investigate optimum conditions for electro-active biofilm (for acetate production, acetate is the starting point for longer chain products) development with a gas diffusion electrode (GDE). GDE with improved CO2 mass transfer can achieve fast start up time within 10 days, and acetate concentration >7 g/L. 2) Clarify the role of the electrode (electric energy) in the production of butanol and hexanol when external electron donors are present (bio-electrochemistry vs. electro-fermentation vs. fermentation). Gain understanding on the role of the electrode potentials especially in presence of an external electron donors (formate, ethanol or more generally biomass). 3) Target the specific production of butanol and hexanol via MES, with high selectivity and yield. Optimizing operational conditions such as pH using continuous feeding regime and providing external electron donors other than formate for the developed biocathode. Concentration target 1-5 g/L. 4) Investigate the feasible routes for the production of medium-chain alkanes via combined MES and further biotransformation using engineered microorganisms. Attain evaluation of feasibility of alkane production from various feedstocks with engineered E-coli, and design and implement molecular pathways for alkane production with rational alterations. This project will be managed by Newcastle with input from Shell. Dr Yu will be managing research activities. PI will meet the PDRA regularly to guide and monitor research progress. Research projects will be offered to master students to assist PDRA. Collaboration will take place both virtually and through meetings. A bi-monthly Skype meeting will connect researchers of both institutions to share results, identify research questions and make plans. A final meeting will be organised to evaluate the outputs against the set objectives, and plan for next step and funding applications. The major risk associated with WP 3 is the yield of desired alcohol products not high enough with MES. This can be overcome by adding external electron donors in the form of formate or ethanol, and investigate reactor process mode to remove bioproducts periodically to push the forward reaction of MES. In addition, although the interactions between work packages and tasks is the strength of this approach, each work package can produce important results on its own, which can reduce the risk for the whole project. The risks of failure in each work package are low or medium and will be mitigated by referring to a formal risk register at our monthly Skype meetings. Projects meetings will help track research progress and support decisions on research direction. The overall risk of the project is thus limited which ensures valuable outcomes for Shell.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: Through this project, the main outputs including publications and conference talk [1-3]s. A review paper on synthesis of multicarbon products from CO2 was published in Sustainable Energy and Fuels. • These findings clarify the role of different electron donors in production of medium chain carboxylates from CO2, which need to be taken into consideration for improving the selectivity and, consequently efficiency of microbial electrosynthesis. • These findings of using Formate and ethanol as extra electro donors clarify the role of different electron donors in production of medium chain carboxylates from CO2, which need to be taken into consideration for improving the selectivity and, consequently efficiency of microbial electrosynthesis. It also opens the possibility of using organic waste streams as potential electron donors for MES for integrated system development. • The modification of GDEs with PANI led to a faster start-up of CO2 conversion (6 days vs. 17 days) and a higher production of acetate and butyrate. • Continuous operational mode enhanced acetate production and increased CE from 58% to 83% from fed-batch to continuous operation, respectively; acetate production rate was increase 4-5 folds with continuous mode. pH was also easier to be maintained to the value in favour of MES. • Combination of MES with further biotransformation or Kolbe electrolysis can provide possible route for medium chain alkane synthesis for drop-in fuel production. Through the results from this study, we have secured further funding through UKRI Circular Chemical Economy centre (EP/V011863/1) and BBSRC HVB PoC grant (HVB PoC HVB-2021/01 (Yu)) on "Enhance selectivity for high value bioproducts from CO2 and waste organics through microbial electrosynthesis" with Genome-scale metabolic modelling of microbial communities involved in the MES process can help design experiments to identify complex microbial interactions and community dynamics, as well as parameters controlling community compositions. A new collaboration with industrial partner Argent Energy is currently ongoing with these projects. 8 publications reported: 10.1039/D1SE00861G , 10.1016/j.joule.2020.09.015, 10.1039/d0fd00132e, 10.1016/j.apenergy.2020.116310, 10.1038/s41522-020-00151-x, 10.1016/j.electacta.2021.137853, 10.1016/j.chemosphere.2021.132548; 10.1016/j.scitotenv.2021.145934.
Start Year 2020
 
Description NBIC POC 02POC19040 Electrical Sensors for Environmental & Civil Engineers: In-situ online biofilm characterisation (Andy Nichols) 
Organisation Environmental Monitoring Solutions Ltd
Country United Kingdom 
Sector Private 
PI Contribution Safe water is a human right and >58% of the global population is now supplied by a piped water source. Biofilms form on the inner surfaces of drinking water distribution system (DWDS) pipes, impacting water safety and quality via the processes they mediate or their mobilisation into the bulk-water. It is therefore vital to accurately detect and understand DWDS biofilms to inform sustainable management practices, safeguarding future water quality - a need aligning with NBIC's strategic priorities of improving biofilm detection and management. However, no sensing method currently exists that enables in-situ biofilm detection in real-time. Furthermore, laboratory analytical techniques are often limited to specific biofilm components (e.g. molecular analysis of the microbiome, protein/ carbohydrate assays) and the biomass of DWDS biofilm samples is often below limits-of-detection for techniques which would capture all biofilm elements (cells, extracellular-polymeric substances and associated organic/inorganic particles). This project aims to prove a novel electrical sensing technique based on an approach previously applied to sediment monitoring in storm-water systems. Using low power excitation and instrumentation, the sensor will detect and interpret the electrical impedance fingerprint of the surrounding media. Designed as a thin flexible film, the sensor can be attached to any surface, making it ideal for translation to pipe inner walls. The proposed project will determine the applicability of the sensor to detect/quantify DWDS biofilms which are thinner and more heterogenic than sediments. The first success indicator will be a demonstrable correlation between sensor-derived data and biofilm parameters measured via laboratory-based techniques, including total and intact cell counts (via flow cytometry), biofilm coverage fraction and average patch-size (via scanning electron microscopy). Further indicators of success will be the submission of an abstract to Hydrosensoft 2021 and the adoption of the technology by industry partners with the view to developing a high-TRL product. Experiments are designed to demonstrate that electrical properties measured by low-cost printed circuit 13 / 37 board (PCB) sensors can detect and quantify the total amount of biofilm on a surface. The application domain is DWDS so high-densitypolyethylene (HDPE), a common pipe material, will be used as a positive control. To control for effects of the PCB surface and/or its energisation on biofilm development, "coupons" of three different substrates will be tested (n=15): i. HDPE (positive) ii. HDPE+PCB un-energised (control for substrate) iii. HDPE+PCB energised (for measurements) Coupons will be submerged in a bench-top tank, fed with a steady flow of drinking water from the local network and operated at 20? to encourage biofilm growth (WP1). Biofilm growth will be monitored over time (WP2). Coupons (n=3) of each substrate type will be removed at fortnightly intervals and biofilm formation will be ascertained by: microbial cell enumeration (and viability) using flow cytometry visualisation; and spatial coverage parameters (biofilm area ratio and patch-size) based on scanning-electron microscopy. The energised PCB sensors (substrate iii) will collect electrical impedance data (one-minute each hour) at a range of voltages and frequencies up to 20kHz. The electrical impedance spectrogram, plotted over time, will enable visualisation of the change in spectral response with biofilm formation. Electrical data will be correlated with the measured biofilm parameters to establish a method for electrical detection/quantification of biofilms (WP3), with uncertainty quantified. Dissemination (WP4) will be via: a project report, conference attendance (HydroSenSoft 2021) and an end-of-project engagement event exploring practical implications and potential applications with end users of the technology.
Collaborator Contribution Full collaborative partners in this POC project.
Impact A novel system was developed to enable in-situ measurement of electrical properties of biofilms developed under laboratory control but with real-world relevance. The new laboratory equipment was tested and developed for robust exploration of biofilm sensors. Flow cytometry results found no significant differences in the cell counts (total or intact) between the five different HDPE coupon or PCB surfaces, suggesting that the energised sensors or surface material did not affect biofilm cell growth rate. However, SEM images did show some differences in biofilm appearance on each of the coupon surfaces, with the uncoated energised PCB having the most different appearance. This indicates that although the cell counts of the biofilm were similar between surfaces and un-energised/energised conditions, there were differences in the biofilm EPS and physical structure. Additional testing is needed to fully explore these findings and determine their implications, though the results further demonstrate the need to detect and quantify biofilms holistically rather than relying on microbial cell analysis. The weak negative trend seen early in the experiment on the coated sensors suggests that, whilst uncontrolled variables masked development of the trend, a correlation between biofilm growth and electrical impedance exists. Due to the visible degradation of the gold uncoated sensors, and the negative trend being seen on the coated sensors, it can be concluded that whilst a different conductive sensor surface may give different results, sensors coated in a thin insulator are preferable to those coated in gold. By modifying the test setup to reduce uncontrolled variables, an improved relationship between electrical and flow cytometry results may be established, leading to an integrated sensor for determining biofilm growth in-situ. Identified next steps: Many of the limitations of the experimental system of the current project can be eliminated by removing the requirement for the long cables of differing lengths in the water. The ultimate solution to this would be to integrate the sensor electronics that perform the impedance measurement into the sensor PCB itself, however in the short-term, a pseudo-in-place measurement system can be used. This would require a jig separate from the tank in which the biofilm is allowed to grow. Once biofilm has been grown on the sensors (or not), each sensor can be removed from the main tank and inserted in the jig, a container mimicking conditions in the tank and with electrical connections at the bottom. The electrical test is carried out on the sensor in the jig where it is then put back into the main tank or taken for flow cytometry. The jig maintains constant external conditions at each test run whilst also minimising parasitic impedance. This would eliminate the noise from most parts of the system and allow each sample to be compared to the other samples as previously uncontrolled and unmeasured variables can be controlled and / or measured, at the cost of requiring more manual effort to run each test. Vehicles for next steps to be realised: The collected data will act as a proof of concept that the electrical sensing technology can be used to infer physical properties of biofilms with further development. This evidence will be used to secure HEIF funding to develop the idea to TRL4/5, followed by venture capital investment to develop the technology to a TRL6/7 product. At this stage, the intention is to take the product to TRL8/9 via partnering and licensing IP with one of our existing partners in sensor manufacture (e.g. Acoustic Sensing Technologies Ltd / ADS LLC), or to create a spin-out company to develop the product, with the intention of distributing through EMS, making use of their extensive market knowledge and industry contact network. Academically, this proof of concept and subsequent work will provide the basis for a much larger (>£500k) EPSRC application. The highly interdisciplinary proposal would examine the in-situ formation of biofilms in urban water infrastructure, using the new technology to provide laboratory and field data. Also under investigation will be the potential to use electrical stimulation to control biofilm development. Project partners in Sheffield will include Dr Nichols (hydraulics & sensors), Dr Fish (biofilms & flow cytometry) and Dr Davidson (impedance spectroscopy), along with Dr Rodenburg (biofilm scanning electron microscopy) and Prof Boxall (pipe hydraulics and discolouration). Industrial collaboration will be sought from EMS, and a range of water companies accessible through the existing links of Twenty65 and The Sheffield Water Centre.
Start Year 2020
 
Description NBIC POC 02POC19040 Electrical Sensors for Environmental & Civil Engineers: In-situ online biofilm characterisation (Andy Nichols) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Safe water is a human right and >58% of the global population is now supplied by a piped water source. Biofilms form on the inner surfaces of drinking water distribution system (DWDS) pipes, impacting water safety and quality via the processes they mediate or their mobilisation into the bulk-water. It is therefore vital to accurately detect and understand DWDS biofilms to inform sustainable management practices, safeguarding future water quality - a need aligning with NBIC's strategic priorities of improving biofilm detection and management. However, no sensing method currently exists that enables in-situ biofilm detection in real-time. Furthermore, laboratory analytical techniques are often limited to specific biofilm components (e.g. molecular analysis of the microbiome, protein/ carbohydrate assays) and the biomass of DWDS biofilm samples is often below limits-of-detection for techniques which would capture all biofilm elements (cells, extracellular-polymeric substances and associated organic/inorganic particles). This project aims to prove a novel electrical sensing technique based on an approach previously applied to sediment monitoring in storm-water systems. Using low power excitation and instrumentation, the sensor will detect and interpret the electrical impedance fingerprint of the surrounding media. Designed as a thin flexible film, the sensor can be attached to any surface, making it ideal for translation to pipe inner walls. The proposed project will determine the applicability of the sensor to detect/quantify DWDS biofilms which are thinner and more heterogenic than sediments. The first success indicator will be a demonstrable correlation between sensor-derived data and biofilm parameters measured via laboratory-based techniques, including total and intact cell counts (via flow cytometry), biofilm coverage fraction and average patch-size (via scanning electron microscopy). Further indicators of success will be the submission of an abstract to Hydrosensoft 2021 and the adoption of the technology by industry partners with the view to developing a high-TRL product. Experiments are designed to demonstrate that electrical properties measured by low-cost printed circuit 13 / 37 board (PCB) sensors can detect and quantify the total amount of biofilm on a surface. The application domain is DWDS so high-densitypolyethylene (HDPE), a common pipe material, will be used as a positive control. To control for effects of the PCB surface and/or its energisation on biofilm development, "coupons" of three different substrates will be tested (n=15): i. HDPE (positive) ii. HDPE+PCB un-energised (control for substrate) iii. HDPE+PCB energised (for measurements) Coupons will be submerged in a bench-top tank, fed with a steady flow of drinking water from the local network and operated at 20? to encourage biofilm growth (WP1). Biofilm growth will be monitored over time (WP2). Coupons (n=3) of each substrate type will be removed at fortnightly intervals and biofilm formation will be ascertained by: microbial cell enumeration (and viability) using flow cytometry visualisation; and spatial coverage parameters (biofilm area ratio and patch-size) based on scanning-electron microscopy. The energised PCB sensors (substrate iii) will collect electrical impedance data (one-minute each hour) at a range of voltages and frequencies up to 20kHz. The electrical impedance spectrogram, plotted over time, will enable visualisation of the change in spectral response with biofilm formation. Electrical data will be correlated with the measured biofilm parameters to establish a method for electrical detection/quantification of biofilms (WP3), with uncertainty quantified. Dissemination (WP4) will be via: a project report, conference attendance (HydroSenSoft 2021) and an end-of-project engagement event exploring practical implications and potential applications with end users of the technology.
Collaborator Contribution Full collaborative partners in this POC project.
Impact A novel system was developed to enable in-situ measurement of electrical properties of biofilms developed under laboratory control but with real-world relevance. The new laboratory equipment was tested and developed for robust exploration of biofilm sensors. Flow cytometry results found no significant differences in the cell counts (total or intact) between the five different HDPE coupon or PCB surfaces, suggesting that the energised sensors or surface material did not affect biofilm cell growth rate. However, SEM images did show some differences in biofilm appearance on each of the coupon surfaces, with the uncoated energised PCB having the most different appearance. This indicates that although the cell counts of the biofilm were similar between surfaces and un-energised/energised conditions, there were differences in the biofilm EPS and physical structure. Additional testing is needed to fully explore these findings and determine their implications, though the results further demonstrate the need to detect and quantify biofilms holistically rather than relying on microbial cell analysis. The weak negative trend seen early in the experiment on the coated sensors suggests that, whilst uncontrolled variables masked development of the trend, a correlation between biofilm growth and electrical impedance exists. Due to the visible degradation of the gold uncoated sensors, and the negative trend being seen on the coated sensors, it can be concluded that whilst a different conductive sensor surface may give different results, sensors coated in a thin insulator are preferable to those coated in gold. By modifying the test setup to reduce uncontrolled variables, an improved relationship between electrical and flow cytometry results may be established, leading to an integrated sensor for determining biofilm growth in-situ. Identified next steps: Many of the limitations of the experimental system of the current project can be eliminated by removing the requirement for the long cables of differing lengths in the water. The ultimate solution to this would be to integrate the sensor electronics that perform the impedance measurement into the sensor PCB itself, however in the short-term, a pseudo-in-place measurement system can be used. This would require a jig separate from the tank in which the biofilm is allowed to grow. Once biofilm has been grown on the sensors (or not), each sensor can be removed from the main tank and inserted in the jig, a container mimicking conditions in the tank and with electrical connections at the bottom. The electrical test is carried out on the sensor in the jig where it is then put back into the main tank or taken for flow cytometry. The jig maintains constant external conditions at each test run whilst also minimising parasitic impedance. This would eliminate the noise from most parts of the system and allow each sample to be compared to the other samples as previously uncontrolled and unmeasured variables can be controlled and / or measured, at the cost of requiring more manual effort to run each test. Vehicles for next steps to be realised: The collected data will act as a proof of concept that the electrical sensing technology can be used to infer physical properties of biofilms with further development. This evidence will be used to secure HEIF funding to develop the idea to TRL4/5, followed by venture capital investment to develop the technology to a TRL6/7 product. At this stage, the intention is to take the product to TRL8/9 via partnering and licensing IP with one of our existing partners in sensor manufacture (e.g. Acoustic Sensing Technologies Ltd / ADS LLC), or to create a spin-out company to develop the product, with the intention of distributing through EMS, making use of their extensive market knowledge and industry contact network. Academically, this proof of concept and subsequent work will provide the basis for a much larger (>£500k) EPSRC application. The highly interdisciplinary proposal would examine the in-situ formation of biofilms in urban water infrastructure, using the new technology to provide laboratory and field data. Also under investigation will be the potential to use electrical stimulation to control biofilm development. Project partners in Sheffield will include Dr Nichols (hydraulics & sensors), Dr Fish (biofilms & flow cytometry) and Dr Davidson (impedance spectroscopy), along with Dr Rodenburg (biofilm scanning electron microscopy) and Prof Boxall (pipe hydraulics and discolouration). Industrial collaboration will be sought from EMS, and a range of water companies accessible through the existing links of Twenty65 and The Sheffield Water Centre.
Start Year 2020
 
Description NBIC POC 02POC19040 Electrical Sensors for Environmental & Civil Engineers: In-situ online biofilm characterisation (Andy Nichols) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Safe water is a human right and >58% of the global population is now supplied by a piped water source. Biofilms form on the inner surfaces of drinking water distribution system (DWDS) pipes, impacting water safety and quality via the processes they mediate or their mobilisation into the bulk-water. It is therefore vital to accurately detect and understand DWDS biofilms to inform sustainable management practices, safeguarding future water quality - a need aligning with NBIC's strategic priorities of improving biofilm detection and management. However, no sensing method currently exists that enables in-situ biofilm detection in real-time. Furthermore, laboratory analytical techniques are often limited to specific biofilm components (e.g. molecular analysis of the microbiome, protein/ carbohydrate assays) and the biomass of DWDS biofilm samples is often below limits-of-detection for techniques which would capture all biofilm elements (cells, extracellular-polymeric substances and associated organic/inorganic particles). This project aims to prove a novel electrical sensing technique based on an approach previously applied to sediment monitoring in storm-water systems. Using low power excitation and instrumentation, the sensor will detect and interpret the electrical impedance fingerprint of the surrounding media. Designed as a thin flexible film, the sensor can be attached to any surface, making it ideal for translation to pipe inner walls. The proposed project will determine the applicability of the sensor to detect/quantify DWDS biofilms which are thinner and more heterogenic than sediments. The first success indicator will be a demonstrable correlation between sensor-derived data and biofilm parameters measured via laboratory-based techniques, including total and intact cell counts (via flow cytometry), biofilm coverage fraction and average patch-size (via scanning electron microscopy). Further indicators of success will be the submission of an abstract to Hydrosensoft 2021 and the adoption of the technology by industry partners with the view to developing a high-TRL product. Experiments are designed to demonstrate that electrical properties measured by low-cost printed circuit 13 / 37 board (PCB) sensors can detect and quantify the total amount of biofilm on a surface. The application domain is DWDS so high-densitypolyethylene (HDPE), a common pipe material, will be used as a positive control. To control for effects of the PCB surface and/or its energisation on biofilm development, "coupons" of three different substrates will be tested (n=15): i. HDPE (positive) ii. HDPE+PCB un-energised (control for substrate) iii. HDPE+PCB energised (for measurements) Coupons will be submerged in a bench-top tank, fed with a steady flow of drinking water from the local network and operated at 20? to encourage biofilm growth (WP1). Biofilm growth will be monitored over time (WP2). Coupons (n=3) of each substrate type will be removed at fortnightly intervals and biofilm formation will be ascertained by: microbial cell enumeration (and viability) using flow cytometry visualisation; and spatial coverage parameters (biofilm area ratio and patch-size) based on scanning-electron microscopy. The energised PCB sensors (substrate iii) will collect electrical impedance data (one-minute each hour) at a range of voltages and frequencies up to 20kHz. The electrical impedance spectrogram, plotted over time, will enable visualisation of the change in spectral response with biofilm formation. Electrical data will be correlated with the measured biofilm parameters to establish a method for electrical detection/quantification of biofilms (WP3), with uncertainty quantified. Dissemination (WP4) will be via: a project report, conference attendance (HydroSenSoft 2021) and an end-of-project engagement event exploring practical implications and potential applications with end users of the technology.
Collaborator Contribution Full collaborative partners in this POC project.
Impact A novel system was developed to enable in-situ measurement of electrical properties of biofilms developed under laboratory control but with real-world relevance. The new laboratory equipment was tested and developed for robust exploration of biofilm sensors. Flow cytometry results found no significant differences in the cell counts (total or intact) between the five different HDPE coupon or PCB surfaces, suggesting that the energised sensors or surface material did not affect biofilm cell growth rate. However, SEM images did show some differences in biofilm appearance on each of the coupon surfaces, with the uncoated energised PCB having the most different appearance. This indicates that although the cell counts of the biofilm were similar between surfaces and un-energised/energised conditions, there were differences in the biofilm EPS and physical structure. Additional testing is needed to fully explore these findings and determine their implications, though the results further demonstrate the need to detect and quantify biofilms holistically rather than relying on microbial cell analysis. The weak negative trend seen early in the experiment on the coated sensors suggests that, whilst uncontrolled variables masked development of the trend, a correlation between biofilm growth and electrical impedance exists. Due to the visible degradation of the gold uncoated sensors, and the negative trend being seen on the coated sensors, it can be concluded that whilst a different conductive sensor surface may give different results, sensors coated in a thin insulator are preferable to those coated in gold. By modifying the test setup to reduce uncontrolled variables, an improved relationship between electrical and flow cytometry results may be established, leading to an integrated sensor for determining biofilm growth in-situ. Identified next steps: Many of the limitations of the experimental system of the current project can be eliminated by removing the requirement for the long cables of differing lengths in the water. The ultimate solution to this would be to integrate the sensor electronics that perform the impedance measurement into the sensor PCB itself, however in the short-term, a pseudo-in-place measurement system can be used. This would require a jig separate from the tank in which the biofilm is allowed to grow. Once biofilm has been grown on the sensors (or not), each sensor can be removed from the main tank and inserted in the jig, a container mimicking conditions in the tank and with electrical connections at the bottom. The electrical test is carried out on the sensor in the jig where it is then put back into the main tank or taken for flow cytometry. The jig maintains constant external conditions at each test run whilst also minimising parasitic impedance. This would eliminate the noise from most parts of the system and allow each sample to be compared to the other samples as previously uncontrolled and unmeasured variables can be controlled and / or measured, at the cost of requiring more manual effort to run each test. Vehicles for next steps to be realised: The collected data will act as a proof of concept that the electrical sensing technology can be used to infer physical properties of biofilms with further development. This evidence will be used to secure HEIF funding to develop the idea to TRL4/5, followed by venture capital investment to develop the technology to a TRL6/7 product. At this stage, the intention is to take the product to TRL8/9 via partnering and licensing IP with one of our existing partners in sensor manufacture (e.g. Acoustic Sensing Technologies Ltd / ADS LLC), or to create a spin-out company to develop the product, with the intention of distributing through EMS, making use of their extensive market knowledge and industry contact network. Academically, this proof of concept and subsequent work will provide the basis for a much larger (>£500k) EPSRC application. The highly interdisciplinary proposal would examine the in-situ formation of biofilms in urban water infrastructure, using the new technology to provide laboratory and field data. Also under investigation will be the potential to use electrical stimulation to control biofilm development. Project partners in Sheffield will include Dr Nichols (hydraulics & sensors), Dr Fish (biofilms & flow cytometry) and Dr Davidson (impedance spectroscopy), along with Dr Rodenburg (biofilm scanning electron microscopy) and Prof Boxall (pipe hydraulics and discolouration). Industrial collaboration will be sought from EMS, and a range of water companies accessible through the existing links of Twenty65 and The Sheffield Water Centre.
Start Year 2020
 
Description NBIC POC 02POC19041 Gas Plasma for the Prevention and Management of Osteomyelitis Biofilms (Angela Oates) 
Organisation Adtec Plasma Technology
Country United Kingdom 
Sector Private 
PI Contribution The Adtec SteriPlas is a CE marked topical antimicrobial medical device with known activity against wound biofilms, however, its efficacy in osteomyelitis (OM) biofilms is unknown. The overall objective of this project is to develop a OM biofilm infection model to support the optimisation and evaluation of a cold plasma technology for the management of OM biofilms. Evaluating Project Success Our project plan outlined in Q7 and attached documentation, detail the work packages, objectives and timelines for this project. Our key indicators of success are: • Development and validation of a OM biofilm model. Successful model device will support stable Staphylococcus aureus biofilm populations at reproducible densities over a defined period of time. • Identification of an optimal plasma dosing strategy for OM infections. The optimal dosing strategy will be identified as the one with the greatest efficacy against OM biofilms in the model. • Quality and robustness of data. A successful project will have high quality and meaningful data that will support rapid translation for clinical benefit. We will apply rigorous experimental approaches and quality control measures to ensure data are robust and reproducible these include: standardisation of experimental parameters such as model dimensions, bacterial growth phase and densities, media batches, inclusion of positive and negative controls along with technical and biological replicates. • Partner and clinical stakeholder satisfaction. The project represents close collaboration between the University of Hull and Adtec, who provide commercial input throughout. A final report will be generated and circulated to our partners alongside clinical stakeholders. We will measure the success of the project against their satisfaction and further success in securing follow on funding to deliver the next phase of plasma assessment in a clinical setting.
Collaborator Contribution University of Hull: Delivering the project; expertise on methodology and data analysis. Adtec Plasma Technology: Knowledge on device, training and input on clinical treatment.
Impact Feedback from University of Hull: - The overall aim of this project is to develop an osteomyelitis biofilm infection model to support the evaluation and optimisation of a cold plasma technology for the management of osteomyelitis biofilms. We successfully developed a model system which mimicked the porous bone structure associated osteomyelitis and supported the growth of osteomyelitis associated MRSA biofilms on bone-like structure. Using this model we were able to assess how well the cold plasma can penetrate through porous bone and its efficacy on OM biofilms. We were also able to optimise a plasma doing strategy with this model using the framework of current plasma therapeutic dosing strategies used in clinical settings. - The laboratory model developed herein supports the hypothesis that non-thermal plasma can travel through porous structures. Biological matter can however, impede this pathway and impact plasma efficacy, as such dosing strategies and delivery mechanisms will need to be evaluated and enhanced to improve efficacy in a clinical setting. - Know how: OM model design, production and validation. - Data from this work is being appraised by our partner company and will be used to inform their product development, application and marketing strategies. A key aspect of this is the understanding of the need to adapt current therapeutic treatment pathways if adopted for the treatment of OM and how this may impact its utility in a clinical setting and as such market uptake. In addition this project has also been successful in developing a new effective collaborative partnership with the partner company and we are exploring new projects ideas. Our partner company are also now working with our clinical colleagues at our associated hospital sits to help deliver clinical trials in patients.
Start Year 2019
 
Description NBIC POC 02POC19041 Gas Plasma for the Prevention and Management of Osteomyelitis Biofilms (Angela Oates) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The Adtec SteriPlas is a CE marked topical antimicrobial medical device with known activity against wound biofilms, however, its efficacy in osteomyelitis (OM) biofilms is unknown. The overall objective of this project is to develop a OM biofilm infection model to support the optimisation and evaluation of a cold plasma technology for the management of OM biofilms. Evaluating Project Success Our project plan outlined in Q7 and attached documentation, detail the work packages, objectives and timelines for this project. Our key indicators of success are: • Development and validation of a OM biofilm model. Successful model device will support stable Staphylococcus aureus biofilm populations at reproducible densities over a defined period of time. • Identification of an optimal plasma dosing strategy for OM infections. The optimal dosing strategy will be identified as the one with the greatest efficacy against OM biofilms in the model. • Quality and robustness of data. A successful project will have high quality and meaningful data that will support rapid translation for clinical benefit. We will apply rigorous experimental approaches and quality control measures to ensure data are robust and reproducible these include: standardisation of experimental parameters such as model dimensions, bacterial growth phase and densities, media batches, inclusion of positive and negative controls along with technical and biological replicates. • Partner and clinical stakeholder satisfaction. The project represents close collaboration between the University of Hull and Adtec, who provide commercial input throughout. A final report will be generated and circulated to our partners alongside clinical stakeholders. We will measure the success of the project against their satisfaction and further success in securing follow on funding to deliver the next phase of plasma assessment in a clinical setting.
Collaborator Contribution University of Hull: Delivering the project; expertise on methodology and data analysis. Adtec Plasma Technology: Knowledge on device, training and input on clinical treatment.
Impact Feedback from University of Hull: - The overall aim of this project is to develop an osteomyelitis biofilm infection model to support the evaluation and optimisation of a cold plasma technology for the management of osteomyelitis biofilms. We successfully developed a model system which mimicked the porous bone structure associated osteomyelitis and supported the growth of osteomyelitis associated MRSA biofilms on bone-like structure. Using this model we were able to assess how well the cold plasma can penetrate through porous bone and its efficacy on OM biofilms. We were also able to optimise a plasma doing strategy with this model using the framework of current plasma therapeutic dosing strategies used in clinical settings. - The laboratory model developed herein supports the hypothesis that non-thermal plasma can travel through porous structures. Biological matter can however, impede this pathway and impact plasma efficacy, as such dosing strategies and delivery mechanisms will need to be evaluated and enhanced to improve efficacy in a clinical setting. - Know how: OM model design, production and validation. - Data from this work is being appraised by our partner company and will be used to inform their product development, application and marketing strategies. A key aspect of this is the understanding of the need to adapt current therapeutic treatment pathways if adopted for the treatment of OM and how this may impact its utility in a clinical setting and as such market uptake. In addition this project has also been successful in developing a new effective collaborative partnership with the partner company and we are exploring new projects ideas. Our partner company are also now working with our clinical colleagues at our associated hospital sits to help deliver clinical trials in patients.
Start Year 2019
 
Description NBIC POC 02POC19041 Gas Plasma for the Prevention and Management of Osteomyelitis Biofilms (Angela Oates) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution The Adtec SteriPlas is a CE marked topical antimicrobial medical device with known activity against wound biofilms, however, its efficacy in osteomyelitis (OM) biofilms is unknown. The overall objective of this project is to develop a OM biofilm infection model to support the optimisation and evaluation of a cold plasma technology for the management of OM biofilms. Evaluating Project Success Our project plan outlined in Q7 and attached documentation, detail the work packages, objectives and timelines for this project. Our key indicators of success are: • Development and validation of a OM biofilm model. Successful model device will support stable Staphylococcus aureus biofilm populations at reproducible densities over a defined period of time. • Identification of an optimal plasma dosing strategy for OM infections. The optimal dosing strategy will be identified as the one with the greatest efficacy against OM biofilms in the model. • Quality and robustness of data. A successful project will have high quality and meaningful data that will support rapid translation for clinical benefit. We will apply rigorous experimental approaches and quality control measures to ensure data are robust and reproducible these include: standardisation of experimental parameters such as model dimensions, bacterial growth phase and densities, media batches, inclusion of positive and negative controls along with technical and biological replicates. • Partner and clinical stakeholder satisfaction. The project represents close collaboration between the University of Hull and Adtec, who provide commercial input throughout. A final report will be generated and circulated to our partners alongside clinical stakeholders. We will measure the success of the project against their satisfaction and further success in securing follow on funding to deliver the next phase of plasma assessment in a clinical setting.
Collaborator Contribution University of Hull: Delivering the project; expertise on methodology and data analysis. Adtec Plasma Technology: Knowledge on device, training and input on clinical treatment.
Impact Feedback from University of Hull: - The overall aim of this project is to develop an osteomyelitis biofilm infection model to support the evaluation and optimisation of a cold plasma technology for the management of osteomyelitis biofilms. We successfully developed a model system which mimicked the porous bone structure associated osteomyelitis and supported the growth of osteomyelitis associated MRSA biofilms on bone-like structure. Using this model we were able to assess how well the cold plasma can penetrate through porous bone and its efficacy on OM biofilms. We were also able to optimise a plasma doing strategy with this model using the framework of current plasma therapeutic dosing strategies used in clinical settings. - The laboratory model developed herein supports the hypothesis that non-thermal plasma can travel through porous structures. Biological matter can however, impede this pathway and impact plasma efficacy, as such dosing strategies and delivery mechanisms will need to be evaluated and enhanced to improve efficacy in a clinical setting. - Know how: OM model design, production and validation. - Data from this work is being appraised by our partner company and will be used to inform their product development, application and marketing strategies. A key aspect of this is the understanding of the need to adapt current therapeutic treatment pathways if adopted for the treatment of OM and how this may impact its utility in a clinical setting and as such market uptake. In addition this project has also been successful in developing a new effective collaborative partnership with the partner company and we are exploring new projects ideas. Our partner company are also now working with our clinical colleagues at our associated hospital sits to help deliver clinical trials in patients.
Start Year 2019
 
Description NBIC POC 02POC19046 Examining the potential of pharmaceutical agents (XF-drugs) to prevent and proactively manage bacterial and fungal infections in a dynamic ex-vivo ocular model system (Peter Monk) 
Organisation Destiny Pharma
Country United Kingdom 
Sector Private 
PI Contribution In established eye infections, biofilms often form and are difficult to treat with conventional antibiotics, a problem exacerbated by the rise of AMR in a wide range of organisms. Biofilms are responsible for several chronic, ocular infections in man e.g. bacterial keratitis and lacrimal/periorbital infections (Bispo P.J.M. et al, Pathogens 2015, 4, 111-136). Preliminary data (appended) illustrate XF-drug activity in multiple in vivo models of dermal bacterial infection and in a pilot study of in a guinea pig mycological dermatophytosis model. This project seeks to expand the knowledge of a novel series of pharmaceutical agents (XF-drugs) against fungal and bacterial biofilms. The pathogens are clinical isolates from LV Prasad Eye Institute, Hyderabad: Gram-positive bacteria (Staphylococcus aureus and Streptococcus pneumoniae) and fungal (Candida albicans). A porcine corneal explant culture system has been developed for longer-term (12-72h) infection that allows us to study the initial, planktonic, infection as well as microcolony and mature biofilm formation. Over the longer times, the microbes cause disruption of the epithelium and will penetrate into deeper layers of the corneum resulting in ulceration and eventual tissue destruction. Success will be determined as the establishment of infections using a range of clinically relevant bacterial and fungal pathogens, recorded using confocal microscopy. The efficacy of 2 drugs, XF-73 and DPD-207, on developing and established biofilms will be recorded using colony forming unit (CFU) counts from homogenised tissues. Tissue damage will be scored by the degree of corneal opacity and by the size and depth of ulceration.
Collaborator Contribution Full collaborative partners in this NBIC funded proof of concept project.
Impact We detected reproducible PA biofilms on living corneal tissue, demonstrating that the ex vivo porcine model can be used to study tissue/biofilm interactions for at least 24hr. The damage to the corneum closely mimics the rapid damage seen in human corneal infections with PA and so we believe that porcine cornea, easily available through the food industry, can be an important substitute for human corneas and in vivo animal studies. Although the SA strain used could form biofilms on plastic (MBEC assay), no biofilm formation was seen in the porcine model. It is likely that rapid internalisation by phagocytic corneal epithelial cells allows a slow colonisation of the corneum, protected from some antibiotics and the host immune system. Although both XF-73 and DPD-207 could effectively kill SA in planktonic and biofilm forms, only XF-73 could prevent SA infection in the corneal model. This may correlate with more effective killing of intracellular bacteria by this compound. The use of rapidly permeant antibacterials such as compound XF-73 is vital in the treatment of MRSA corneal infections and is a more effective treatment than ciprofloxacin. Our findings concerning the intracellular location of SA in the corneum will be disseminated by publication in an ophthalmology journal. We believe that this will influence clinical practice for the treatment of MRSA infections.
Start Year 2020
 
Description NBIC POC 02POC19046 Examining the potential of pharmaceutical agents (XF-drugs) to prevent and proactively manage bacterial and fungal infections in a dynamic ex-vivo ocular model system (Peter Monk) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution In established eye infections, biofilms often form and are difficult to treat with conventional antibiotics, a problem exacerbated by the rise of AMR in a wide range of organisms. Biofilms are responsible for several chronic, ocular infections in man e.g. bacterial keratitis and lacrimal/periorbital infections (Bispo P.J.M. et al, Pathogens 2015, 4, 111-136). Preliminary data (appended) illustrate XF-drug activity in multiple in vivo models of dermal bacterial infection and in a pilot study of in a guinea pig mycological dermatophytosis model. This project seeks to expand the knowledge of a novel series of pharmaceutical agents (XF-drugs) against fungal and bacterial biofilms. The pathogens are clinical isolates from LV Prasad Eye Institute, Hyderabad: Gram-positive bacteria (Staphylococcus aureus and Streptococcus pneumoniae) and fungal (Candida albicans). A porcine corneal explant culture system has been developed for longer-term (12-72h) infection that allows us to study the initial, planktonic, infection as well as microcolony and mature biofilm formation. Over the longer times, the microbes cause disruption of the epithelium and will penetrate into deeper layers of the corneum resulting in ulceration and eventual tissue destruction. Success will be determined as the establishment of infections using a range of clinically relevant bacterial and fungal pathogens, recorded using confocal microscopy. The efficacy of 2 drugs, XF-73 and DPD-207, on developing and established biofilms will be recorded using colony forming unit (CFU) counts from homogenised tissues. Tissue damage will be scored by the degree of corneal opacity and by the size and depth of ulceration.
Collaborator Contribution Full collaborative partners in this NBIC funded proof of concept project.
Impact We detected reproducible PA biofilms on living corneal tissue, demonstrating that the ex vivo porcine model can be used to study tissue/biofilm interactions for at least 24hr. The damage to the corneum closely mimics the rapid damage seen in human corneal infections with PA and so we believe that porcine cornea, easily available through the food industry, can be an important substitute for human corneas and in vivo animal studies. Although the SA strain used could form biofilms on plastic (MBEC assay), no biofilm formation was seen in the porcine model. It is likely that rapid internalisation by phagocytic corneal epithelial cells allows a slow colonisation of the corneum, protected from some antibiotics and the host immune system. Although both XF-73 and DPD-207 could effectively kill SA in planktonic and biofilm forms, only XF-73 could prevent SA infection in the corneal model. This may correlate with more effective killing of intracellular bacteria by this compound. The use of rapidly permeant antibacterials such as compound XF-73 is vital in the treatment of MRSA corneal infections and is a more effective treatment than ciprofloxacin. Our findings concerning the intracellular location of SA in the corneum will be disseminated by publication in an ophthalmology journal. We believe that this will influence clinical practice for the treatment of MRSA infections.
Start Year 2020
 
Description NBIC POC 02POC19046 Examining the potential of pharmaceutical agents (XF-drugs) to prevent and proactively manage bacterial and fungal infections in a dynamic ex-vivo ocular model system (Peter Monk) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution In established eye infections, biofilms often form and are difficult to treat with conventional antibiotics, a problem exacerbated by the rise of AMR in a wide range of organisms. Biofilms are responsible for several chronic, ocular infections in man e.g. bacterial keratitis and lacrimal/periorbital infections (Bispo P.J.M. et al, Pathogens 2015, 4, 111-136). Preliminary data (appended) illustrate XF-drug activity in multiple in vivo models of dermal bacterial infection and in a pilot study of in a guinea pig mycological dermatophytosis model. This project seeks to expand the knowledge of a novel series of pharmaceutical agents (XF-drugs) against fungal and bacterial biofilms. The pathogens are clinical isolates from LV Prasad Eye Institute, Hyderabad: Gram-positive bacteria (Staphylococcus aureus and Streptococcus pneumoniae) and fungal (Candida albicans). A porcine corneal explant culture system has been developed for longer-term (12-72h) infection that allows us to study the initial, planktonic, infection as well as microcolony and mature biofilm formation. Over the longer times, the microbes cause disruption of the epithelium and will penetrate into deeper layers of the corneum resulting in ulceration and eventual tissue destruction. Success will be determined as the establishment of infections using a range of clinically relevant bacterial and fungal pathogens, recorded using confocal microscopy. The efficacy of 2 drugs, XF-73 and DPD-207, on developing and established biofilms will be recorded using colony forming unit (CFU) counts from homogenised tissues. Tissue damage will be scored by the degree of corneal opacity and by the size and depth of ulceration.
Collaborator Contribution Full collaborative partners in this NBIC funded proof of concept project.
Impact We detected reproducible PA biofilms on living corneal tissue, demonstrating that the ex vivo porcine model can be used to study tissue/biofilm interactions for at least 24hr. The damage to the corneum closely mimics the rapid damage seen in human corneal infections with PA and so we believe that porcine cornea, easily available through the food industry, can be an important substitute for human corneas and in vivo animal studies. Although the SA strain used could form biofilms on plastic (MBEC assay), no biofilm formation was seen in the porcine model. It is likely that rapid internalisation by phagocytic corneal epithelial cells allows a slow colonisation of the corneum, protected from some antibiotics and the host immune system. Although both XF-73 and DPD-207 could effectively kill SA in planktonic and biofilm forms, only XF-73 could prevent SA infection in the corneal model. This may correlate with more effective killing of intracellular bacteria by this compound. The use of rapidly permeant antibacterials such as compound XF-73 is vital in the treatment of MRSA corneal infections and is a more effective treatment than ciprofloxacin. Our findings concerning the intracellular location of SA in the corneum will be disseminated by publication in an ophthalmology journal. We believe that this will influence clinical practice for the treatment of MRSA infections.
Start Year 2020
 
Description NBIC POC 02POC19052 In-situ Underwater Optical Sensors (Rasmita Raval) 
Organisation Chelsea Technologies Group
Country United Kingdom 
Sector Private 
PI Contribution There is a major demand in marine, freshwater, oil and gas sectors for miniaturized underwater sensors to monitor microbial contamination, e.g. bacteria and algae, at high sensitivity and with the ability to work in remote, unmanned environments. However, a serious, unsolved problem in sensor technology is biofouling, which disrupts measurements, sometimes in less than a week (figure bottom right). This is also a barrier to developing more ambitious sensors capable of detecting the onset of microfouling biofilms at submerged surfaces, which lead to multi-billion economic costs per annum. This project brings together a world-leader in underwater optical sensors (CTG) and the University ofLiverpool (UoL), who specialise in anti-biofilm materials and the spectroscopic detection of biofilms. The project will modify CTG's V-Lux miniature multi-parameter fluorometer (Fig, bottom left). The V-Lux can be configured with multiple UV LED sources that excite and detect fluorescence in Algae, dissolved Aromatic Hydrocarbons or Bacterial Tryptophan, with sensitivity at the parts-per-trillion level (Fig, top). The project will: - Create photoactive nanostructured TiO2 coatings on sensor windows that are activated by inbuilt UV LED excitation sources to generate reactive oxygen species to deliver self-cleaning and self-disinfecting anti-biofouling functions. - Modify the V-Lux unit to enable the underwater detection of bacterial biofilms at submerged surfaces. A successful project will bring to market much needed anti-biofouling underwater sensors, plus a new sensor range dedicated to the detection of underwater biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact A suitable photoactive coating has been identified and successfully deposited on prototype sensor windows. The coatings were characterised by specialised surface analysis techniques such as X-ray Photoelectron Spectroscopy and AFM. A suitable apparatus was constructed to undertake photoradiation bioassays. Single species bioassays showed the coatings were extremely effective in preventing and destroying biofilms under LED radiation of selected wavelengths that are used in CTL sensors. An alternative and cheaper anti-biofouling approach also became apparent during the project. Both approaches are currently being evaluated by the collaboration partner Chelsea Technologies. Two viable approaches to implementing photoactivated anti-biofouling approaches to in situ underwater sensors have been identified. Both are technically feasible and affordable for a working device.
Start Year 2020
 
Description NBIC POC 02POC19052 In-situ Underwater Optical Sensors (Rasmita Raval) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution There is a major demand in marine, freshwater, oil and gas sectors for miniaturized underwater sensors to monitor microbial contamination, e.g. bacteria and algae, at high sensitivity and with the ability to work in remote, unmanned environments. However, a serious, unsolved problem in sensor technology is biofouling, which disrupts measurements, sometimes in less than a week (figure bottom right). This is also a barrier to developing more ambitious sensors capable of detecting the onset of microfouling biofilms at submerged surfaces, which lead to multi-billion economic costs per annum. This project brings together a world-leader in underwater optical sensors (CTG) and the University ofLiverpool (UoL), who specialise in anti-biofilm materials and the spectroscopic detection of biofilms. The project will modify CTG's V-Lux miniature multi-parameter fluorometer (Fig, bottom left). The V-Lux can be configured with multiple UV LED sources that excite and detect fluorescence in Algae, dissolved Aromatic Hydrocarbons or Bacterial Tryptophan, with sensitivity at the parts-per-trillion level (Fig, top). The project will: - Create photoactive nanostructured TiO2 coatings on sensor windows that are activated by inbuilt UV LED excitation sources to generate reactive oxygen species to deliver self-cleaning and self-disinfecting anti-biofouling functions. - Modify the V-Lux unit to enable the underwater detection of bacterial biofilms at submerged surfaces. A successful project will bring to market much needed anti-biofouling underwater sensors, plus a new sensor range dedicated to the detection of underwater biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact A suitable photoactive coating has been identified and successfully deposited on prototype sensor windows. The coatings were characterised by specialised surface analysis techniques such as X-ray Photoelectron Spectroscopy and AFM. A suitable apparatus was constructed to undertake photoradiation bioassays. Single species bioassays showed the coatings were extremely effective in preventing and destroying biofilms under LED radiation of selected wavelengths that are used in CTL sensors. An alternative and cheaper anti-biofouling approach also became apparent during the project. Both approaches are currently being evaluated by the collaboration partner Chelsea Technologies. Two viable approaches to implementing photoactivated anti-biofouling approaches to in situ underwater sensors have been identified. Both are technically feasible and affordable for a working device.
Start Year 2020
 
Description NBIC POC 02POC19052 In-situ Underwater Optical Sensors (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution There is a major demand in marine, freshwater, oil and gas sectors for miniaturized underwater sensors to monitor microbial contamination, e.g. bacteria and algae, at high sensitivity and with the ability to work in remote, unmanned environments. However, a serious, unsolved problem in sensor technology is biofouling, which disrupts measurements, sometimes in less than a week (figure bottom right). This is also a barrier to developing more ambitious sensors capable of detecting the onset of microfouling biofilms at submerged surfaces, which lead to multi-billion economic costs per annum. This project brings together a world-leader in underwater optical sensors (CTG) and the University ofLiverpool (UoL), who specialise in anti-biofilm materials and the spectroscopic detection of biofilms. The project will modify CTG's V-Lux miniature multi-parameter fluorometer (Fig, bottom left). The V-Lux can be configured with multiple UV LED sources that excite and detect fluorescence in Algae, dissolved Aromatic Hydrocarbons or Bacterial Tryptophan, with sensitivity at the parts-per-trillion level (Fig, top). The project will: - Create photoactive nanostructured TiO2 coatings on sensor windows that are activated by inbuilt UV LED excitation sources to generate reactive oxygen species to deliver self-cleaning and self-disinfecting anti-biofouling functions. - Modify the V-Lux unit to enable the underwater detection of bacterial biofilms at submerged surfaces. A successful project will bring to market much needed anti-biofouling underwater sensors, plus a new sensor range dedicated to the detection of underwater biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact A suitable photoactive coating has been identified and successfully deposited on prototype sensor windows. The coatings were characterised by specialised surface analysis techniques such as X-ray Photoelectron Spectroscopy and AFM. A suitable apparatus was constructed to undertake photoradiation bioassays. Single species bioassays showed the coatings were extremely effective in preventing and destroying biofilms under LED radiation of selected wavelengths that are used in CTL sensors. An alternative and cheaper anti-biofouling approach also became apparent during the project. Both approaches are currently being evaluated by the collaboration partner Chelsea Technologies. Two viable approaches to implementing photoactivated anti-biofouling approaches to in situ underwater sensors have been identified. Both are technically feasible and affordable for a working device.
Start Year 2020
 
Description NBIC POC 02POC19064 Branched functional polymers for disrupting bacterial biofilms (Stephen Rimmer) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution The aim is: To develop a polymer system that can be used disrupt a wide range of biofilms, exposing the constituent bacteria to antimicrobials. Biofilms in wounds protect bacteria from the effects of antimicrobials. There is therefore a substantial benefit in the combined application of these therapeutics in conjunction with materials that disrupt biofilms. In this work we aim to scope the use of "biofilm-disrupting polymers" in a range of biofilms containing bacteria of relevance in infected wounds. In previous work we have shown that highly branched polymers penetrate model infected wounds and loosened colonising bacteria in tissue models of skin. Recently we also showed that the polymers disrupt biofilms containing Gram positive bacteria. This project will further extend the use of these polymers to include disruption of other biofilms including those formed by Gram negative bacteria. Success will be measured by determining the effectiveness of an optimised system to disrupt biofilms. Time to disrupt the film will be used as a measurable factor as well as the extent of disruption. Partial success will be indicated if the system disrupts only certain biofilms but it is not effective against all biofilms tested. We have de-risked this project in that preliminary data has been published on the surprising ability of this class of polymers to disrupt biofilms. Rimmer (Bradford) and Percival (5D) currently collaborate on a Innovate UK, which is on track and successful. They also successfully co-supervised a PhD CASE award. They will manage their work packages and will meet in person or via teleconference at least once per month with milestone review meetings at appropriate points.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Bradford: Polymers with branched structure and antibiotic groups at the chain ends bind to bacteria and some of these polymers respond to binding by losing water. In previous work we had shown that on binding the polymers disrupted biofilms. To further investigate this behaviour we prepared three classes of polymer functionalised with either polymyxin (to bind to Gram-negative bacteria), vancomycin (to bind to Gram-positive bacteria) or carboxylic acid groups (non-binding). Initial data indicated that the non-binding carboxylic acid polymers were unexpectedly effective but further investigations showed that HB-PNIPAM with ligands that bind to bacteria were required to disrupt biofilms. - Conclusions: 1. The disruption of biofilms by highly branched polymers is highly dependent on structure and architecture. 2. We produced materials that disrupted biofilms. 3. Libraries of polymers were produced and characterised. Sets of well-defined of materials were produced and data sets have been produced for future programmes. 4. The current data will provide a foundation for future formulations that can disrupt biofilms but more work is required to find the optimised formulations. 5. Initial data suggested that carboxylic acid-functional HB-PNIPAM disrupted biofilms but in the CDC Biofilm reactor it was shown that a range of these polymers was not effective. On the other hand a vancomycin-functional HB-PNIPAM did reduce the amount of Gram-positive S. aureus strains - No IP was produced but the data will form the basis of improved polymer design for the disruption of biofilms. - The key next steps are to design further polymers with ligands that selectively bind to Gram-positive or Gram-negative species. The initial work had pointed to the possibility of using carboxylic acid-functional polymers. This would have been a major step change in the cost-effectiveness of these materials. However, further work showed that these materials were less effective than originally thought and further work will focus of the polymyxin and/or vancomycin-functional polymers. In other work we have scaled the synthesis of these polymers to produce kg quantities and our current work is leading us to discover more cost-effective functionalities (more cost effective than the current antibiotics that are used).
Start Year 2019
 
Description NBIC POC 02POC19064 Branched functional polymers for disrupting bacterial biofilms (Stephen Rimmer) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim is: To develop a polymer system that can be used disrupt a wide range of biofilms, exposing the constituent bacteria to antimicrobials. Biofilms in wounds protect bacteria from the effects of antimicrobials. There is therefore a substantial benefit in the combined application of these therapeutics in conjunction with materials that disrupt biofilms. In this work we aim to scope the use of "biofilm-disrupting polymers" in a range of biofilms containing bacteria of relevance in infected wounds. In previous work we have shown that highly branched polymers penetrate model infected wounds and loosened colonising bacteria in tissue models of skin. Recently we also showed that the polymers disrupt biofilms containing Gram positive bacteria. This project will further extend the use of these polymers to include disruption of other biofilms including those formed by Gram negative bacteria. Success will be measured by determining the effectiveness of an optimised system to disrupt biofilms. Time to disrupt the film will be used as a measurable factor as well as the extent of disruption. Partial success will be indicated if the system disrupts only certain biofilms but it is not effective against all biofilms tested. We have de-risked this project in that preliminary data has been published on the surprising ability of this class of polymers to disrupt biofilms. Rimmer (Bradford) and Percival (5D) currently collaborate on a Innovate UK, which is on track and successful. They also successfully co-supervised a PhD CASE award. They will manage their work packages and will meet in person or via teleconference at least once per month with milestone review meetings at appropriate points.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Bradford: Polymers with branched structure and antibiotic groups at the chain ends bind to bacteria and some of these polymers respond to binding by losing water. In previous work we had shown that on binding the polymers disrupted biofilms. To further investigate this behaviour we prepared three classes of polymer functionalised with either polymyxin (to bind to Gram-negative bacteria), vancomycin (to bind to Gram-positive bacteria) or carboxylic acid groups (non-binding). Initial data indicated that the non-binding carboxylic acid polymers were unexpectedly effective but further investigations showed that HB-PNIPAM with ligands that bind to bacteria were required to disrupt biofilms. - Conclusions: 1. The disruption of biofilms by highly branched polymers is highly dependent on structure and architecture. 2. We produced materials that disrupted biofilms. 3. Libraries of polymers were produced and characterised. Sets of well-defined of materials were produced and data sets have been produced for future programmes. 4. The current data will provide a foundation for future formulations that can disrupt biofilms but more work is required to find the optimised formulations. 5. Initial data suggested that carboxylic acid-functional HB-PNIPAM disrupted biofilms but in the CDC Biofilm reactor it was shown that a range of these polymers was not effective. On the other hand a vancomycin-functional HB-PNIPAM did reduce the amount of Gram-positive S. aureus strains - No IP was produced but the data will form the basis of improved polymer design for the disruption of biofilms. - The key next steps are to design further polymers with ligands that selectively bind to Gram-positive or Gram-negative species. The initial work had pointed to the possibility of using carboxylic acid-functional polymers. This would have been a major step change in the cost-effectiveness of these materials. However, further work showed that these materials were less effective than originally thought and further work will focus of the polymyxin and/or vancomycin-functional polymers. In other work we have scaled the synthesis of these polymers to produce kg quantities and our current work is leading us to discover more cost-effective functionalities (more cost effective than the current antibiotics that are used).
Start Year 2019
 
Description NBIC POC 02POC19064 Branched functional polymers for disrupting bacterial biofilms (Stephen Rimmer) 
Organisation University of Bradford
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim is: To develop a polymer system that can be used disrupt a wide range of biofilms, exposing the constituent bacteria to antimicrobials. Biofilms in wounds protect bacteria from the effects of antimicrobials. There is therefore a substantial benefit in the combined application of these therapeutics in conjunction with materials that disrupt biofilms. In this work we aim to scope the use of "biofilm-disrupting polymers" in a range of biofilms containing bacteria of relevance in infected wounds. In previous work we have shown that highly branched polymers penetrate model infected wounds and loosened colonising bacteria in tissue models of skin. Recently we also showed that the polymers disrupt biofilms containing Gram positive bacteria. This project will further extend the use of these polymers to include disruption of other biofilms including those formed by Gram negative bacteria. Success will be measured by determining the effectiveness of an optimised system to disrupt biofilms. Time to disrupt the film will be used as a measurable factor as well as the extent of disruption. Partial success will be indicated if the system disrupts only certain biofilms but it is not effective against all biofilms tested. We have de-risked this project in that preliminary data has been published on the surprising ability of this class of polymers to disrupt biofilms. Rimmer (Bradford) and Percival (5D) currently collaborate on a Innovate UK, which is on track and successful. They also successfully co-supervised a PhD CASE award. They will manage their work packages and will meet in person or via teleconference at least once per month with milestone review meetings at appropriate points.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Bradford: Polymers with branched structure and antibiotic groups at the chain ends bind to bacteria and some of these polymers respond to binding by losing water. In previous work we had shown that on binding the polymers disrupted biofilms. To further investigate this behaviour we prepared three classes of polymer functionalised with either polymyxin (to bind to Gram-negative bacteria), vancomycin (to bind to Gram-positive bacteria) or carboxylic acid groups (non-binding). Initial data indicated that the non-binding carboxylic acid polymers were unexpectedly effective but further investigations showed that HB-PNIPAM with ligands that bind to bacteria were required to disrupt biofilms. - Conclusions: 1. The disruption of biofilms by highly branched polymers is highly dependent on structure and architecture. 2. We produced materials that disrupted biofilms. 3. Libraries of polymers were produced and characterised. Sets of well-defined of materials were produced and data sets have been produced for future programmes. 4. The current data will provide a foundation for future formulations that can disrupt biofilms but more work is required to find the optimised formulations. 5. Initial data suggested that carboxylic acid-functional HB-PNIPAM disrupted biofilms but in the CDC Biofilm reactor it was shown that a range of these polymers was not effective. On the other hand a vancomycin-functional HB-PNIPAM did reduce the amount of Gram-positive S. aureus strains - No IP was produced but the data will form the basis of improved polymer design for the disruption of biofilms. - The key next steps are to design further polymers with ligands that selectively bind to Gram-positive or Gram-negative species. The initial work had pointed to the possibility of using carboxylic acid-functional polymers. This would have been a major step change in the cost-effectiveness of these materials. However, further work showed that these materials were less effective than originally thought and further work will focus of the polymyxin and/or vancomycin-functional polymers. In other work we have scaled the synthesis of these polymers to produce kg quantities and our current work is leading us to discover more cost-effective functionalities (more cost effective than the current antibiotics that are used).
Start Year 2019
 
Description NBIC POC 02POC19086 HullSense (Karen Tait) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Objective: We propose to design, build and test a working prototype biofilm sensor that will sense biofilms in real time on a ship's hull to allow optimised in-water hull cleaning. Biofouling on commercial vessels is managed using antifouling coatings and mechanical cleaning of the hull, which is often conducted in-water. Timing of these in-water cleans is critical. If cleaning occurs too frequently, the life of the antifouling coating can be compromised. This results in considerable additional costs in terms of dry docking, preparation and re-coating. In turn this causes costly unscheduled interruptions to planned charters resulting in damage to reputation and perceived reliability. If cleaning is not done frequently enough, the vessel is left steaming with a compromised hull with increased fuel consumption and increased environmental emissions. Our sensor will allow direct measurement of biofilm accumulation on a hull to enable in-water hull cleaning to be correctly scheduled to: • extend the longevity of coating systems; • reduce fuel consumption; • reduce green-house gas emissions; • reduce other harmful ship exhaust emissions (e.g. SOx, NOx, particulates); • minimise the spreading of biofouling organisms and, in particular, harmful & invasive species; • reduce health and safety issues with divers in commercial settings, and; • save money through better targeted cleaning. Success for this project will be to develop a real time sensor that: • Is able to detect commercially relevant levels of microfouling in real time and convey this to the user. • Has been calibrated and substantiated against traditional laboratory based methods of biofilm quantification. • Is able to survive extended deployment on the exterior of a working commercial vessel. Ultimately we seek to use this project to demonstrate the proof of concept of this novel biofilm detection technology. This will enable us to seek follow on funding to take the sensor to the next stage of commercialisation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19086 HullSense (Karen Tait) 
Organisation Plymouth Marine Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution Objective: We propose to design, build and test a working prototype biofilm sensor that will sense biofilms in real time on a ship's hull to allow optimised in-water hull cleaning. Biofouling on commercial vessels is managed using antifouling coatings and mechanical cleaning of the hull, which is often conducted in-water. Timing of these in-water cleans is critical. If cleaning occurs too frequently, the life of the antifouling coating can be compromised. This results in considerable additional costs in terms of dry docking, preparation and re-coating. In turn this causes costly unscheduled interruptions to planned charters resulting in damage to reputation and perceived reliability. If cleaning is not done frequently enough, the vessel is left steaming with a compromised hull with increased fuel consumption and increased environmental emissions. Our sensor will allow direct measurement of biofilm accumulation on a hull to enable in-water hull cleaning to be correctly scheduled to: • extend the longevity of coating systems; • reduce fuel consumption; • reduce green-house gas emissions; • reduce other harmful ship exhaust emissions (e.g. SOx, NOx, particulates); • minimise the spreading of biofouling organisms and, in particular, harmful & invasive species; • reduce health and safety issues with divers in commercial settings, and; • save money through better targeted cleaning. Success for this project will be to develop a real time sensor that: • Is able to detect commercially relevant levels of microfouling in real time and convey this to the user. • Has been calibrated and substantiated against traditional laboratory based methods of biofilm quantification. • Is able to survive extended deployment on the exterior of a working commercial vessel. Ultimately we seek to use this project to demonstrate the proof of concept of this novel biofilm detection technology. This will enable us to seek follow on funding to take the sensor to the next stage of commercialisation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19086 HullSense (Karen Tait) 
Organisation Valeport
Country United Kingdom 
Sector Private 
PI Contribution Objective: We propose to design, build and test a working prototype biofilm sensor that will sense biofilms in real time on a ship's hull to allow optimised in-water hull cleaning. Biofouling on commercial vessels is managed using antifouling coatings and mechanical cleaning of the hull, which is often conducted in-water. Timing of these in-water cleans is critical. If cleaning occurs too frequently, the life of the antifouling coating can be compromised. This results in considerable additional costs in terms of dry docking, preparation and re-coating. In turn this causes costly unscheduled interruptions to planned charters resulting in damage to reputation and perceived reliability. If cleaning is not done frequently enough, the vessel is left steaming with a compromised hull with increased fuel consumption and increased environmental emissions. Our sensor will allow direct measurement of biofilm accumulation on a hull to enable in-water hull cleaning to be correctly scheduled to: • extend the longevity of coating systems; • reduce fuel consumption; • reduce green-house gas emissions; • reduce other harmful ship exhaust emissions (e.g. SOx, NOx, particulates); • minimise the spreading of biofouling organisms and, in particular, harmful & invasive species; • reduce health and safety issues with divers in commercial settings, and; • save money through better targeted cleaning. Success for this project will be to develop a real time sensor that: • Is able to detect commercially relevant levels of microfouling in real time and convey this to the user. • Has been calibrated and substantiated against traditional laboratory based methods of biofilm quantification. • Is able to survive extended deployment on the exterior of a working commercial vessel. Ultimately we seek to use this project to demonstrate the proof of concept of this novel biofilm detection technology. This will enable us to seek follow on funding to take the sensor to the next stage of commercialisation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19091 Development of new antibiofilm agents through repurposing of existing licensed drugs (Brian Jones) 
Organisation King's College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Our overall aim is to identify existing drugs with the potential to be repurposed as antibiofilm agents. Our initial focus for this work will be catheter-associated urinary tract infection (CAUTI), for which we have identified biofilm-related drug targets in key pathogens and possess representative pre-clinical models of catheter biofilm formation. However, we expect our findings to have broad relevance to biofilm-related infections. CAUTI are the second most common healthcare-associated infections worldwide, involving biofilm formation by bacterial species of particular concern (with regard to antibiotic resistance). CAUTIs are estimated to cost the NHS £1.0-2.5Bn and account for ~2100 deaths p.a. Proteus mirabilis is a key pathogen in CAUTI and forms extensive crystalline biofilms that block catheters, leading to serious clinical complications. We have identified efflux systems important for P. mirabilis biofilm formation and shown inhibitors of these pumps can attenuate biofilm formation. These include the drugs fluoxetine and thioridazine, which significantly reduced biofilm formation by P. mirabilis and other species (Pseudomonas aeruginosa, Escherichia coli) in models of infection. We now propose to undertake a comprehensive survey of licensed drugs for interaction with biofilm associated efflux targets and potential antibiofilm activity. Our established molecular models of target efflux systems will allow us to conduct in-silico screening of ~10,000 drugs with regulatory approvals. Many of these compounds are commercially available or have progressed to at least phase II trials. Top ranked candidate compounds will be evaluated for biological activity. Success will be indicated by identification of 5-6 candidate drugs for further development. Our primary objective is to identify drugs that can be repurposed without modification, but drugs identified could also serve as new chemical scaffolds for development of potent biofilm disruptors. The identification of candidate drugs will provide the foundation from which we can understand the relevant IP landscape and engage industry partners.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19091 Development of new antibiofilm agents through repurposing of existing licensed drugs (Brian Jones) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Our overall aim is to identify existing drugs with the potential to be repurposed as antibiofilm agents. Our initial focus for this work will be catheter-associated urinary tract infection (CAUTI), for which we have identified biofilm-related drug targets in key pathogens and possess representative pre-clinical models of catheter biofilm formation. However, we expect our findings to have broad relevance to biofilm-related infections. CAUTI are the second most common healthcare-associated infections worldwide, involving biofilm formation by bacterial species of particular concern (with regard to antibiotic resistance). CAUTIs are estimated to cost the NHS £1.0-2.5Bn and account for ~2100 deaths p.a. Proteus mirabilis is a key pathogen in CAUTI and forms extensive crystalline biofilms that block catheters, leading to serious clinical complications. We have identified efflux systems important for P. mirabilis biofilm formation and shown inhibitors of these pumps can attenuate biofilm formation. These include the drugs fluoxetine and thioridazine, which significantly reduced biofilm formation by P. mirabilis and other species (Pseudomonas aeruginosa, Escherichia coli) in models of infection. We now propose to undertake a comprehensive survey of licensed drugs for interaction with biofilm associated efflux targets and potential antibiofilm activity. Our established molecular models of target efflux systems will allow us to conduct in-silico screening of ~10,000 drugs with regulatory approvals. Many of these compounds are commercially available or have progressed to at least phase II trials. Top ranked candidate compounds will be evaluated for biological activity. Success will be indicated by identification of 5-6 candidate drugs for further development. Our primary objective is to identify drugs that can be repurposed without modification, but drugs identified could also serve as new chemical scaffolds for development of potent biofilm disruptors. The identification of candidate drugs will provide the foundation from which we can understand the relevant IP landscape and engage industry partners.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19091 Development of new antibiofilm agents through repurposing of existing licensed drugs (Brian Jones) 
Organisation Public Health England
Country United Kingdom 
Sector Public 
PI Contribution Our overall aim is to identify existing drugs with the potential to be repurposed as antibiofilm agents. Our initial focus for this work will be catheter-associated urinary tract infection (CAUTI), for which we have identified biofilm-related drug targets in key pathogens and possess representative pre-clinical models of catheter biofilm formation. However, we expect our findings to have broad relevance to biofilm-related infections. CAUTI are the second most common healthcare-associated infections worldwide, involving biofilm formation by bacterial species of particular concern (with regard to antibiotic resistance). CAUTIs are estimated to cost the NHS £1.0-2.5Bn and account for ~2100 deaths p.a. Proteus mirabilis is a key pathogen in CAUTI and forms extensive crystalline biofilms that block catheters, leading to serious clinical complications. We have identified efflux systems important for P. mirabilis biofilm formation and shown inhibitors of these pumps can attenuate biofilm formation. These include the drugs fluoxetine and thioridazine, which significantly reduced biofilm formation by P. mirabilis and other species (Pseudomonas aeruginosa, Escherichia coli) in models of infection. We now propose to undertake a comprehensive survey of licensed drugs for interaction with biofilm associated efflux targets and potential antibiofilm activity. Our established molecular models of target efflux systems will allow us to conduct in-silico screening of ~10,000 drugs with regulatory approvals. Many of these compounds are commercially available or have progressed to at least phase II trials. Top ranked candidate compounds will be evaluated for biological activity. Success will be indicated by identification of 5-6 candidate drugs for further development. Our primary objective is to identify drugs that can be repurposed without modification, but drugs identified could also serve as new chemical scaffolds for development of potent biofilm disruptors. The identification of candidate drugs will provide the foundation from which we can understand the relevant IP landscape and engage industry partners.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19091 Development of new antibiofilm agents through repurposing of existing licensed drugs (Brian Jones) 
Organisation University of Bath
Country United Kingdom 
Sector Academic/University 
PI Contribution Our overall aim is to identify existing drugs with the potential to be repurposed as antibiofilm agents. Our initial focus for this work will be catheter-associated urinary tract infection (CAUTI), for which we have identified biofilm-related drug targets in key pathogens and possess representative pre-clinical models of catheter biofilm formation. However, we expect our findings to have broad relevance to biofilm-related infections. CAUTI are the second most common healthcare-associated infections worldwide, involving biofilm formation by bacterial species of particular concern (with regard to antibiotic resistance). CAUTIs are estimated to cost the NHS £1.0-2.5Bn and account for ~2100 deaths p.a. Proteus mirabilis is a key pathogen in CAUTI and forms extensive crystalline biofilms that block catheters, leading to serious clinical complications. We have identified efflux systems important for P. mirabilis biofilm formation and shown inhibitors of these pumps can attenuate biofilm formation. These include the drugs fluoxetine and thioridazine, which significantly reduced biofilm formation by P. mirabilis and other species (Pseudomonas aeruginosa, Escherichia coli) in models of infection. We now propose to undertake a comprehensive survey of licensed drugs for interaction with biofilm associated efflux targets and potential antibiofilm activity. Our established molecular models of target efflux systems will allow us to conduct in-silico screening of ~10,000 drugs with regulatory approvals. Many of these compounds are commercially available or have progressed to at least phase II trials. Top ranked candidate compounds will be evaluated for biological activity. Success will be indicated by identification of 5-6 candidate drugs for further development. Our primary objective is to identify drugs that can be repurposed without modification, but drugs identified could also serve as new chemical scaffolds for development of potent biofilm disruptors. The identification of candidate drugs will provide the foundation from which we can understand the relevant IP landscape and engage industry partners.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19093 Detection of biofilms that give rise to wound infection; development of a prototype point-of-care device based on rapid detection and analysis of microbial volatiles. (Robin Thorn) 
Organisation Altered Carbon Ltd.
Country United Kingdom 
Sector Private 
PI Contribution This project will stimulate innovation in the field of diagnostics (detection) within wound care, developing technology that could improve patient outcomes. The detection and characterisation of wound biofilms throughout the infection process is vital to provide rapid diagnostics that are capable of both detecting infection, and to assess the requirement/ effectiveness of medical interventions (e.g. effective antibiotic use). The overall study aim is to develop a proof-of-concept device to detect, identify and quantify microbial volatiles produced by microbial biofilms associated with wound infection processes, for application within wound diagnostics. This technological approach is based on graphene sensors which can be designed and fabricated to selectively bind target gases of interest. UWE has recently developed a novel perfusion wound biofilm model (based on a collagen matrix; see figure) that enables growth of wound-associated microorganisms as mono and mixed species biofilms. Utilising advanced mass spectrometry (MS) techniques (Gas Chromatography-MS and Selected Ion Flow Tube-MS), the headspace gases emanating from these biofilm cultures have been identified and quantified, enabling differentiation of species known to cause wound infections. This knowledge has been used to create a Biofilm Volatile Reference Library (BVRL). Within the proposed project, we intend to exploit this knowledge in collaboration with a volatile sensing technology provider to develop a prototype diagnostic technology platform, with future applications within the clinical space. Success will be measured by the selection and validation of arrays of fabricated graphene sensors based on those that optimally respond to gases known to differentiate wound biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of West England (UWE) Bristol: - The overall study aim was to develop a proof-of-concept device to detect microbial volatiles produced by microbial biofilms associated with wound infection processes, for application within wound diagnostics. This technological approach was based on graphene sensors developed by Altered Carbon which were designed and fabricated to selectively bind target gases of interest. Key organisms implicated in wound infection (Staphylococcus aureus, Pseudomonas aeruginosa and Streptococcus pyogenes) were successfully cultured within the UWE collagen wound biofilm model enabling growth of reproducible steady state biofilms. This enabled the microbial biofilm volatile compound headspace to be analysed using graphene sensor arrays developed by Altered Carbon and mapped to real time volatile compound quantification data generated through use of Selected Ion Flow Tube - Mass Spectrometry (SIFT-MS). - When testing the Altered Carbon graphene sensor array, certain sensor elements were more responsive to bacterial biofilm headspace samples, demonstrating clear responses that occurred at the same time as key compounds were measured by SIFT-MS from the biofilm headspace samples. This enabled refinement of the response signal of fabricated graphene sensors, based on graphene element spectral analysis, in response to exposure to each species of bacterial biofilms. The spectral analysis demonstrated that the signal features between sample types (i.e. bacterial biofilm types) are sufficiently different to be exploited by machine learning algorithms within future exploitation projects. - This proof-of-concept study has resulted in identification of a suitable Altered Carbon graphene sensor array, that with further refinement and tuning has the potential to lead to development of a sensor array capable of discriminating between P. aeruginosa, S. aureus and S. pyogenes biofilms and sterile control samples. This work lays the foundation for development of a sensor system that can be applied to identification of these bacterial species in a clinical setting, and funding is now being sought to exploit these study findings. - This proof-of-concept study has resulted in identification of a suitable Altered Carbon graphene sensor array, that with further refinement and tuning has the potential to lead to development of a sensor array capable of discriminating between P. aeruginosa, S. aureus and S. pyogenes biofilms and sterile control samples. This work lays the foundation for development of a sensor system that can be applied to identification of these bacterial species in a clinical setting and funding is now being sought to exploit these study findings. - The project has resulted in the generation of data sets related to the development of the sensor response of the Altered Carbon sensor array to key microbial volatiles. UWE Bristol and Altered Carbon will co-own the Intellectual Property Rights in these results together with any derivatives thereof, and may take such steps as it may decide from time to time, at its expense, to register and maintain any protection for the Intellectual Property Rights in the results, including filing and maintaining patent applications. No current patents based on the project outcomes are pending. - Due to the success of this project, a number of key next steps have already been undertaken and have been identified to exploit the successful project outcomes: 1. A grant application has been submitted to Innovate UK (~£200,000) based on outcomes of this successful industry/academia collaboration, whereby the application of graphene based sensors is being developed for food spoilage detection. 2. A KEEP+ application is being prepared by Altered Carbon to help support their research in this area and to enable continued access to UWE laboratories for further testing of the sensor array systems built within this project. 3. Future grant applications are currently being prepared to exploit the scientific technological outcomes from this NBIC project.
Start Year 2019
 
Description NBIC POC 02POC19093 Detection of biofilms that give rise to wound infection; development of a prototype point-of-care device based on rapid detection and analysis of microbial volatiles. (Robin Thorn) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This project will stimulate innovation in the field of diagnostics (detection) within wound care, developing technology that could improve patient outcomes. The detection and characterisation of wound biofilms throughout the infection process is vital to provide rapid diagnostics that are capable of both detecting infection, and to assess the requirement/ effectiveness of medical interventions (e.g. effective antibiotic use). The overall study aim is to develop a proof-of-concept device to detect, identify and quantify microbial volatiles produced by microbial biofilms associated with wound infection processes, for application within wound diagnostics. This technological approach is based on graphene sensors which can be designed and fabricated to selectively bind target gases of interest. UWE has recently developed a novel perfusion wound biofilm model (based on a collagen matrix; see figure) that enables growth of wound-associated microorganisms as mono and mixed species biofilms. Utilising advanced mass spectrometry (MS) techniques (Gas Chromatography-MS and Selected Ion Flow Tube-MS), the headspace gases emanating from these biofilm cultures have been identified and quantified, enabling differentiation of species known to cause wound infections. This knowledge has been used to create a Biofilm Volatile Reference Library (BVRL). Within the proposed project, we intend to exploit this knowledge in collaboration with a volatile sensing technology provider to develop a prototype diagnostic technology platform, with future applications within the clinical space. Success will be measured by the selection and validation of arrays of fabricated graphene sensors based on those that optimally respond to gases known to differentiate wound biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of West England (UWE) Bristol: - The overall study aim was to develop a proof-of-concept device to detect microbial volatiles produced by microbial biofilms associated with wound infection processes, for application within wound diagnostics. This technological approach was based on graphene sensors developed by Altered Carbon which were designed and fabricated to selectively bind target gases of interest. Key organisms implicated in wound infection (Staphylococcus aureus, Pseudomonas aeruginosa and Streptococcus pyogenes) were successfully cultured within the UWE collagen wound biofilm model enabling growth of reproducible steady state biofilms. This enabled the microbial biofilm volatile compound headspace to be analysed using graphene sensor arrays developed by Altered Carbon and mapped to real time volatile compound quantification data generated through use of Selected Ion Flow Tube - Mass Spectrometry (SIFT-MS). - When testing the Altered Carbon graphene sensor array, certain sensor elements were more responsive to bacterial biofilm headspace samples, demonstrating clear responses that occurred at the same time as key compounds were measured by SIFT-MS from the biofilm headspace samples. This enabled refinement of the response signal of fabricated graphene sensors, based on graphene element spectral analysis, in response to exposure to each species of bacterial biofilms. The spectral analysis demonstrated that the signal features between sample types (i.e. bacterial biofilm types) are sufficiently different to be exploited by machine learning algorithms within future exploitation projects. - This proof-of-concept study has resulted in identification of a suitable Altered Carbon graphene sensor array, that with further refinement and tuning has the potential to lead to development of a sensor array capable of discriminating between P. aeruginosa, S. aureus and S. pyogenes biofilms and sterile control samples. This work lays the foundation for development of a sensor system that can be applied to identification of these bacterial species in a clinical setting, and funding is now being sought to exploit these study findings. - This proof-of-concept study has resulted in identification of a suitable Altered Carbon graphene sensor array, that with further refinement and tuning has the potential to lead to development of a sensor array capable of discriminating between P. aeruginosa, S. aureus and S. pyogenes biofilms and sterile control samples. This work lays the foundation for development of a sensor system that can be applied to identification of these bacterial species in a clinical setting and funding is now being sought to exploit these study findings. - The project has resulted in the generation of data sets related to the development of the sensor response of the Altered Carbon sensor array to key microbial volatiles. UWE Bristol and Altered Carbon will co-own the Intellectual Property Rights in these results together with any derivatives thereof, and may take such steps as it may decide from time to time, at its expense, to register and maintain any protection for the Intellectual Property Rights in the results, including filing and maintaining patent applications. No current patents based on the project outcomes are pending. - Due to the success of this project, a number of key next steps have already been undertaken and have been identified to exploit the successful project outcomes: 1. A grant application has been submitted to Innovate UK (~£200,000) based on outcomes of this successful industry/academia collaboration, whereby the application of graphene based sensors is being developed for food spoilage detection. 2. A KEEP+ application is being prepared by Altered Carbon to help support their research in this area and to enable continued access to UWE laboratories for further testing of the sensor array systems built within this project. 3. Future grant applications are currently being prepared to exploit the scientific technological outcomes from this NBIC project.
Start Year 2019
 
Description NBIC POC 02POC19093 Detection of biofilms that give rise to wound infection; development of a prototype point-of-care device based on rapid detection and analysis of microbial volatiles. (Robin Thorn) 
Organisation University Hospitals Bristol NHS Foundation Trust
Country United Kingdom 
Sector Hospitals 
PI Contribution This project will stimulate innovation in the field of diagnostics (detection) within wound care, developing technology that could improve patient outcomes. The detection and characterisation of wound biofilms throughout the infection process is vital to provide rapid diagnostics that are capable of both detecting infection, and to assess the requirement/ effectiveness of medical interventions (e.g. effective antibiotic use). The overall study aim is to develop a proof-of-concept device to detect, identify and quantify microbial volatiles produced by microbial biofilms associated with wound infection processes, for application within wound diagnostics. This technological approach is based on graphene sensors which can be designed and fabricated to selectively bind target gases of interest. UWE has recently developed a novel perfusion wound biofilm model (based on a collagen matrix; see figure) that enables growth of wound-associated microorganisms as mono and mixed species biofilms. Utilising advanced mass spectrometry (MS) techniques (Gas Chromatography-MS and Selected Ion Flow Tube-MS), the headspace gases emanating from these biofilm cultures have been identified and quantified, enabling differentiation of species known to cause wound infections. This knowledge has been used to create a Biofilm Volatile Reference Library (BVRL). Within the proposed project, we intend to exploit this knowledge in collaboration with a volatile sensing technology provider to develop a prototype diagnostic technology platform, with future applications within the clinical space. Success will be measured by the selection and validation of arrays of fabricated graphene sensors based on those that optimally respond to gases known to differentiate wound biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of West England (UWE) Bristol: - The overall study aim was to develop a proof-of-concept device to detect microbial volatiles produced by microbial biofilms associated with wound infection processes, for application within wound diagnostics. This technological approach was based on graphene sensors developed by Altered Carbon which were designed and fabricated to selectively bind target gases of interest. Key organisms implicated in wound infection (Staphylococcus aureus, Pseudomonas aeruginosa and Streptococcus pyogenes) were successfully cultured within the UWE collagen wound biofilm model enabling growth of reproducible steady state biofilms. This enabled the microbial biofilm volatile compound headspace to be analysed using graphene sensor arrays developed by Altered Carbon and mapped to real time volatile compound quantification data generated through use of Selected Ion Flow Tube - Mass Spectrometry (SIFT-MS). - When testing the Altered Carbon graphene sensor array, certain sensor elements were more responsive to bacterial biofilm headspace samples, demonstrating clear responses that occurred at the same time as key compounds were measured by SIFT-MS from the biofilm headspace samples. This enabled refinement of the response signal of fabricated graphene sensors, based on graphene element spectral analysis, in response to exposure to each species of bacterial biofilms. The spectral analysis demonstrated that the signal features between sample types (i.e. bacterial biofilm types) are sufficiently different to be exploited by machine learning algorithms within future exploitation projects. - This proof-of-concept study has resulted in identification of a suitable Altered Carbon graphene sensor array, that with further refinement and tuning has the potential to lead to development of a sensor array capable of discriminating between P. aeruginosa, S. aureus and S. pyogenes biofilms and sterile control samples. This work lays the foundation for development of a sensor system that can be applied to identification of these bacterial species in a clinical setting, and funding is now being sought to exploit these study findings. - This proof-of-concept study has resulted in identification of a suitable Altered Carbon graphene sensor array, that with further refinement and tuning has the potential to lead to development of a sensor array capable of discriminating between P. aeruginosa, S. aureus and S. pyogenes biofilms and sterile control samples. This work lays the foundation for development of a sensor system that can be applied to identification of these bacterial species in a clinical setting and funding is now being sought to exploit these study findings. - The project has resulted in the generation of data sets related to the development of the sensor response of the Altered Carbon sensor array to key microbial volatiles. UWE Bristol and Altered Carbon will co-own the Intellectual Property Rights in these results together with any derivatives thereof, and may take such steps as it may decide from time to time, at its expense, to register and maintain any protection for the Intellectual Property Rights in the results, including filing and maintaining patent applications. No current patents based on the project outcomes are pending. - Due to the success of this project, a number of key next steps have already been undertaken and have been identified to exploit the successful project outcomes: 1. A grant application has been submitted to Innovate UK (~£200,000) based on outcomes of this successful industry/academia collaboration, whereby the application of graphene based sensors is being developed for food spoilage detection. 2. A KEEP+ application is being prepared by Altered Carbon to help support their research in this area and to enable continued access to UWE laboratories for further testing of the sensor array systems built within this project. 3. Future grant applications are currently being prepared to exploit the scientific technological outcomes from this NBIC project.
Start Year 2019
 
Description NBIC POC 02POC19093 Detection of biofilms that give rise to wound infection; development of a prototype point-of-care device based on rapid detection and analysis of microbial volatiles. (Robin Thorn) 
Organisation University of the West of England
Country United Kingdom 
Sector Academic/University 
PI Contribution This project will stimulate innovation in the field of diagnostics (detection) within wound care, developing technology that could improve patient outcomes. The detection and characterisation of wound biofilms throughout the infection process is vital to provide rapid diagnostics that are capable of both detecting infection, and to assess the requirement/ effectiveness of medical interventions (e.g. effective antibiotic use). The overall study aim is to develop a proof-of-concept device to detect, identify and quantify microbial volatiles produced by microbial biofilms associated with wound infection processes, for application within wound diagnostics. This technological approach is based on graphene sensors which can be designed and fabricated to selectively bind target gases of interest. UWE has recently developed a novel perfusion wound biofilm model (based on a collagen matrix; see figure) that enables growth of wound-associated microorganisms as mono and mixed species biofilms. Utilising advanced mass spectrometry (MS) techniques (Gas Chromatography-MS and Selected Ion Flow Tube-MS), the headspace gases emanating from these biofilm cultures have been identified and quantified, enabling differentiation of species known to cause wound infections. This knowledge has been used to create a Biofilm Volatile Reference Library (BVRL). Within the proposed project, we intend to exploit this knowledge in collaboration with a volatile sensing technology provider to develop a prototype diagnostic technology platform, with future applications within the clinical space. Success will be measured by the selection and validation of arrays of fabricated graphene sensors based on those that optimally respond to gases known to differentiate wound biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of West England (UWE) Bristol: - The overall study aim was to develop a proof-of-concept device to detect microbial volatiles produced by microbial biofilms associated with wound infection processes, for application within wound diagnostics. This technological approach was based on graphene sensors developed by Altered Carbon which were designed and fabricated to selectively bind target gases of interest. Key organisms implicated in wound infection (Staphylococcus aureus, Pseudomonas aeruginosa and Streptococcus pyogenes) were successfully cultured within the UWE collagen wound biofilm model enabling growth of reproducible steady state biofilms. This enabled the microbial biofilm volatile compound headspace to be analysed using graphene sensor arrays developed by Altered Carbon and mapped to real time volatile compound quantification data generated through use of Selected Ion Flow Tube - Mass Spectrometry (SIFT-MS). - When testing the Altered Carbon graphene sensor array, certain sensor elements were more responsive to bacterial biofilm headspace samples, demonstrating clear responses that occurred at the same time as key compounds were measured by SIFT-MS from the biofilm headspace samples. This enabled refinement of the response signal of fabricated graphene sensors, based on graphene element spectral analysis, in response to exposure to each species of bacterial biofilms. The spectral analysis demonstrated that the signal features between sample types (i.e. bacterial biofilm types) are sufficiently different to be exploited by machine learning algorithms within future exploitation projects. - This proof-of-concept study has resulted in identification of a suitable Altered Carbon graphene sensor array, that with further refinement and tuning has the potential to lead to development of a sensor array capable of discriminating between P. aeruginosa, S. aureus and S. pyogenes biofilms and sterile control samples. This work lays the foundation for development of a sensor system that can be applied to identification of these bacterial species in a clinical setting, and funding is now being sought to exploit these study findings. - This proof-of-concept study has resulted in identification of a suitable Altered Carbon graphene sensor array, that with further refinement and tuning has the potential to lead to development of a sensor array capable of discriminating between P. aeruginosa, S. aureus and S. pyogenes biofilms and sterile control samples. This work lays the foundation for development of a sensor system that can be applied to identification of these bacterial species in a clinical setting and funding is now being sought to exploit these study findings. - The project has resulted in the generation of data sets related to the development of the sensor response of the Altered Carbon sensor array to key microbial volatiles. UWE Bristol and Altered Carbon will co-own the Intellectual Property Rights in these results together with any derivatives thereof, and may take such steps as it may decide from time to time, at its expense, to register and maintain any protection for the Intellectual Property Rights in the results, including filing and maintaining patent applications. No current patents based on the project outcomes are pending. - Due to the success of this project, a number of key next steps have already been undertaken and have been identified to exploit the successful project outcomes: 1. A grant application has been submitted to Innovate UK (~£200,000) based on outcomes of this successful industry/academia collaboration, whereby the application of graphene based sensors is being developed for food spoilage detection. 2. A KEEP+ application is being prepared by Altered Carbon to help support their research in this area and to enable continued access to UWE laboratories for further testing of the sensor array systems built within this project. 3. Future grant applications are currently being prepared to exploit the scientific technological outcomes from this NBIC project.
Start Year 2019
 
Description NBIC POC 02POC19095 Impact of ozone application on Listeria monocytogenes biofilms on drain covers under food processing-relevant conditions (Nicola Holden) 
Organisation Anacail Ltd
Country United Kingdom 
Sector Private 
PI Contribution We aim to determine the impact and efficacy of Anacail's ozone application to Listeria monocytogenes (Lmo) biofilms in a food processing setting, using stainless steel discs and factory-relevant drain covers. We have developed a model drain system and high-dose ozone-generating unit that reduced viable counts of Lmo in biofilms by 5.2 log10 (Attachment). However, it is unclear whether the cells convert to a viable non-culturable state (VBNC), undetectable by standard methods but could still act as an inoculum source. Therefore, the aim is to determine the impact of high-dose ozone treatment on Listeria biofilms, in terms of the efficacy of treatment and the resulting physiological status of the biofilm. The work comprises two phases: quantification of culturable and VBNC Lmo biofilms formed on (A) standardised stainless steel discs and (B) on industry-sourced drain covers. Both systems will use waste vegetable washing water to mimic industrial processing situations and assessments will be posttreatment under industry relevant temperatures. The performance of high-dose ozone will be compared to an industry-relevant chemical sanitiser (quaternary ammonium compounds) on Lmo biofilms. A secondary aim is to determine whether inherent antimicrobial resistance encoded by qacH alters the outcome, using Lmo variants. Success will be measured from development of novel data on the impact of ozone treatment on viability of Lmo in industry-relevant biofilms, compared to industry standard santitisers. In turn, this data will inform on optimisation of ozone delivery as a feasible treatment option and will inform on risk management for Lmo in food processing situations. Experimentation will use Listeria monocytogenes (Lmo) strain ATCC 7644, serotype 1/2a associated with human illness and compare with an industry-relevant problem Lmo isolate encoding qacH genes for resistance to chemical sanitisers, to test in situ high-dose ozone treatment on antimicrobial resistance strains.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The James Hutton Institute: - The project followed the plan for the first three month, i.e. Phase A, using stainless steel discs as proxies for drain covers. however, in December 2019, we learnt that Anacail Ltd had gone into administration and was no longer operational. As such, they were no longer able to act as a project partner and carry out ozone treatments. Initially, we explored other treatment options, e.g. substitution of hydrogen peroxide for ozone. However, since we were no longer able to progress without Anacail as a project partner, we came to the joint decision with NBIC to end the project prematurely. - The key outputs were: 1. SS discs were a reasonable proxy for SS drain covers for assessing ozone-treatment of Lmo biofilms, under conditions akin to fresh produce production. 2. Ozone treatment of 188 ppm over 30 minutes resulted in ~ 2 orders of magnitude decrease in Lmo biofilms on SS discs. 3. It was not possible to assess viability using a commercial Live/Dead staining kit, since ozone (and peroxide) treatment affected efficacy of one of the dyes, resulting in a large over-estimate in viability. - Some milestones were completed but there was insufficient time to attempt alternative viability measurements, or to complete the measurements with SS drain covers. The next steps are to seek an alternative partner that may be suitable to continue or expand on the initial project findings. - Know-how was generated for the ineffectiveness of a commercial viability kit on ozone / peroxide treated bacterial cells. Although this project was aborted when the industrial partner went into administration, we are still able to make use of the partial findings elsewhere. In particular, the data on Listeria monocytogenes resistance to ozone in biofilm sataus, and impact of peroxide treatment on the cell membrane has helped to inform a PhD studentship project that aims to understand the impact of ozone on the stress response of microbes associated with fresh produce. This is an ongoing PhD project and so there are no tangible outcomes yet.
Start Year 2019
 
Description NBIC POC 02POC19095 Impact of ozone application on Listeria monocytogenes biofilms on drain covers under food processing-relevant conditions (Nicola Holden) 
Organisation James Hutton Institute
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution We aim to determine the impact and efficacy of Anacail's ozone application to Listeria monocytogenes (Lmo) biofilms in a food processing setting, using stainless steel discs and factory-relevant drain covers. We have developed a model drain system and high-dose ozone-generating unit that reduced viable counts of Lmo in biofilms by 5.2 log10 (Attachment). However, it is unclear whether the cells convert to a viable non-culturable state (VBNC), undetectable by standard methods but could still act as an inoculum source. Therefore, the aim is to determine the impact of high-dose ozone treatment on Listeria biofilms, in terms of the efficacy of treatment and the resulting physiological status of the biofilm. The work comprises two phases: quantification of culturable and VBNC Lmo biofilms formed on (A) standardised stainless steel discs and (B) on industry-sourced drain covers. Both systems will use waste vegetable washing water to mimic industrial processing situations and assessments will be posttreatment under industry relevant temperatures. The performance of high-dose ozone will be compared to an industry-relevant chemical sanitiser (quaternary ammonium compounds) on Lmo biofilms. A secondary aim is to determine whether inherent antimicrobial resistance encoded by qacH alters the outcome, using Lmo variants. Success will be measured from development of novel data on the impact of ozone treatment on viability of Lmo in industry-relevant biofilms, compared to industry standard santitisers. In turn, this data will inform on optimisation of ozone delivery as a feasible treatment option and will inform on risk management for Lmo in food processing situations. Experimentation will use Listeria monocytogenes (Lmo) strain ATCC 7644, serotype 1/2a associated with human illness and compare with an industry-relevant problem Lmo isolate encoding qacH genes for resistance to chemical sanitisers, to test in situ high-dose ozone treatment on antimicrobial resistance strains.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The James Hutton Institute: - The project followed the plan for the first three month, i.e. Phase A, using stainless steel discs as proxies for drain covers. however, in December 2019, we learnt that Anacail Ltd had gone into administration and was no longer operational. As such, they were no longer able to act as a project partner and carry out ozone treatments. Initially, we explored other treatment options, e.g. substitution of hydrogen peroxide for ozone. However, since we were no longer able to progress without Anacail as a project partner, we came to the joint decision with NBIC to end the project prematurely. - The key outputs were: 1. SS discs were a reasonable proxy for SS drain covers for assessing ozone-treatment of Lmo biofilms, under conditions akin to fresh produce production. 2. Ozone treatment of 188 ppm over 30 minutes resulted in ~ 2 orders of magnitude decrease in Lmo biofilms on SS discs. 3. It was not possible to assess viability using a commercial Live/Dead staining kit, since ozone (and peroxide) treatment affected efficacy of one of the dyes, resulting in a large over-estimate in viability. - Some milestones were completed but there was insufficient time to attempt alternative viability measurements, or to complete the measurements with SS drain covers. The next steps are to seek an alternative partner that may be suitable to continue or expand on the initial project findings. - Know-how was generated for the ineffectiveness of a commercial viability kit on ozone / peroxide treated bacterial cells. Although this project was aborted when the industrial partner went into administration, we are still able to make use of the partial findings elsewhere. In particular, the data on Listeria monocytogenes resistance to ozone in biofilm sataus, and impact of peroxide treatment on the cell membrane has helped to inform a PhD studentship project that aims to understand the impact of ozone on the stress response of microbes associated with fresh produce. This is an ongoing PhD project and so there are no tangible outcomes yet.
Start Year 2019
 
Description NBIC POC 02POC19095 Impact of ozone application on Listeria monocytogenes biofilms on drain covers under food processing-relevant conditions (Nicola Holden) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution We aim to determine the impact and efficacy of Anacail's ozone application to Listeria monocytogenes (Lmo) biofilms in a food processing setting, using stainless steel discs and factory-relevant drain covers. We have developed a model drain system and high-dose ozone-generating unit that reduced viable counts of Lmo in biofilms by 5.2 log10 (Attachment). However, it is unclear whether the cells convert to a viable non-culturable state (VBNC), undetectable by standard methods but could still act as an inoculum source. Therefore, the aim is to determine the impact of high-dose ozone treatment on Listeria biofilms, in terms of the efficacy of treatment and the resulting physiological status of the biofilm. The work comprises two phases: quantification of culturable and VBNC Lmo biofilms formed on (A) standardised stainless steel discs and (B) on industry-sourced drain covers. Both systems will use waste vegetable washing water to mimic industrial processing situations and assessments will be posttreatment under industry relevant temperatures. The performance of high-dose ozone will be compared to an industry-relevant chemical sanitiser (quaternary ammonium compounds) on Lmo biofilms. A secondary aim is to determine whether inherent antimicrobial resistance encoded by qacH alters the outcome, using Lmo variants. Success will be measured from development of novel data on the impact of ozone treatment on viability of Lmo in industry-relevant biofilms, compared to industry standard santitisers. In turn, this data will inform on optimisation of ozone delivery as a feasible treatment option and will inform on risk management for Lmo in food processing situations. Experimentation will use Listeria monocytogenes (Lmo) strain ATCC 7644, serotype 1/2a associated with human illness and compare with an industry-relevant problem Lmo isolate encoding qacH genes for resistance to chemical sanitisers, to test in situ high-dose ozone treatment on antimicrobial resistance strains.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The James Hutton Institute: - The project followed the plan for the first three month, i.e. Phase A, using stainless steel discs as proxies for drain covers. however, in December 2019, we learnt that Anacail Ltd had gone into administration and was no longer operational. As such, they were no longer able to act as a project partner and carry out ozone treatments. Initially, we explored other treatment options, e.g. substitution of hydrogen peroxide for ozone. However, since we were no longer able to progress without Anacail as a project partner, we came to the joint decision with NBIC to end the project prematurely. - The key outputs were: 1. SS discs were a reasonable proxy for SS drain covers for assessing ozone-treatment of Lmo biofilms, under conditions akin to fresh produce production. 2. Ozone treatment of 188 ppm over 30 minutes resulted in ~ 2 orders of magnitude decrease in Lmo biofilms on SS discs. 3. It was not possible to assess viability using a commercial Live/Dead staining kit, since ozone (and peroxide) treatment affected efficacy of one of the dyes, resulting in a large over-estimate in viability. - Some milestones were completed but there was insufficient time to attempt alternative viability measurements, or to complete the measurements with SS drain covers. The next steps are to seek an alternative partner that may be suitable to continue or expand on the initial project findings. - Know-how was generated for the ineffectiveness of a commercial viability kit on ozone / peroxide treated bacterial cells. Although this project was aborted when the industrial partner went into administration, we are still able to make use of the partial findings elsewhere. In particular, the data on Listeria monocytogenes resistance to ozone in biofilm sataus, and impact of peroxide treatment on the cell membrane has helped to inform a PhD studentship project that aims to understand the impact of ozone on the stress response of microbes associated with fresh produce. This is an ongoing PhD project and so there are no tangible outcomes yet.
Start Year 2019
 
Description NBIC POC 02POC19100 Bacterial networking; why it's not always beneficial to build bridges and make connections. (Gavin Melaugh) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution We aim to use Comamonas denitrificans as a model system with which to understand how filamentous bacteria induce network formation in suspended microbial communities. This will provide Veolia UK with fundamental insight into how network formation occurs in their activated sludge flocs at Seafield WWTW in Edinburgh. This insight will facilitate the design of new methods that prevent (NBIC thematic area) microbial network formation as opposed to employing rather costly methods to treat the symptoms (sludge bulking). We plan to manipulate the concentration of filamentous cells in the suspension in a manner that reduces the propensity of the system to network. In the context of the NBIC thematic area of engineering, here, we will be making the first steps in designing a microbial suspension in which the mechanical interactions are optimised to prevent the formation of microbial networks. Insight from the model system will help us probe the fundamental science of microbial network formation in real activated sludge samples provided by Veolia. Building on the design concepts in this POC project, we will continue the collaboration via the application of larger grants. In this case, we will propose to engineer microbial consortia that maximise flocculation and settling, whilst minimising water retention in the sludge in order to reduce dewatering costs. The success of the POC project will be measured academically via the impact of the publications resulting from the fundamental science. This will provide a platform from which to apply for larger grants and fellowships, facilitating Gavin Melaugh's ambition of becoming a principal investigator. Progression from TRL 2 (beginning) to TRL 3 (end) will be a success from Veolia's perspective, providing a foundation with which to continue the collaboration longer term via the application of a Knowledge Transfer Partnership via Innovate UK with the view to progressing to TRL 4.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Edinburgh: This project demonstrated than Comamonas denitrificans, a bacteria isolated from activated sludge, could be used as a model organism with which to understand the aggregation/flocculation behaviour of filamentous bacteria. Experiments and simulations reveal that filamentous cells form network-like structures that depend crucially on the concentration of cells, the length distribution of the cells, and the degree of cohesion (stickiness) between cells. These bacterial networks display mechanical properties analogous to colloidal gels, e.g., collapse and fracture. Moving forward, two papers will result from the work undertaken during this project: 1 - a simulation study which is to be submitted immediately; and 2 - a joint experimental/simulation study which is a month or two away from being submitted. A PhD, through the Soft Matter and Functional Interfaces (SOFI) CDT has been awarded, and the proposed work is building on the work developed in this POC. At this stage, it is pending on a student from the CDT signing up for it. This work has strengthened the collaboration with Veolia who are involved in the SOFI PhD, and are sponsoring another PhD through the Edinburgh Earth, Ecology, and Environment Doctoral Training Partnership (E4 DTP), which will focus on the microbial generation of nitrous oxide in wastewater treatment. Again this is pending our applicant, who has interview on 25th Feb 2022, getting into the program.
Start Year 2020
 
Description NBIC POC 02POC19100 Bacterial networking; why it's not always beneficial to build bridges and make connections. (Gavin Melaugh) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution We aim to use Comamonas denitrificans as a model system with which to understand how filamentous bacteria induce network formation in suspended microbial communities. This will provide Veolia UK with fundamental insight into how network formation occurs in their activated sludge flocs at Seafield WWTW in Edinburgh. This insight will facilitate the design of new methods that prevent (NBIC thematic area) microbial network formation as opposed to employing rather costly methods to treat the symptoms (sludge bulking). We plan to manipulate the concentration of filamentous cells in the suspension in a manner that reduces the propensity of the system to network. In the context of the NBIC thematic area of engineering, here, we will be making the first steps in designing a microbial suspension in which the mechanical interactions are optimised to prevent the formation of microbial networks. Insight from the model system will help us probe the fundamental science of microbial network formation in real activated sludge samples provided by Veolia. Building on the design concepts in this POC project, we will continue the collaboration via the application of larger grants. In this case, we will propose to engineer microbial consortia that maximise flocculation and settling, whilst minimising water retention in the sludge in order to reduce dewatering costs. The success of the POC project will be measured academically via the impact of the publications resulting from the fundamental science. This will provide a platform from which to apply for larger grants and fellowships, facilitating Gavin Melaugh's ambition of becoming a principal investigator. Progression from TRL 2 (beginning) to TRL 3 (end) will be a success from Veolia's perspective, providing a foundation with which to continue the collaboration longer term via the application of a Knowledge Transfer Partnership via Innovate UK with the view to progressing to TRL 4.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Edinburgh: This project demonstrated than Comamonas denitrificans, a bacteria isolated from activated sludge, could be used as a model organism with which to understand the aggregation/flocculation behaviour of filamentous bacteria. Experiments and simulations reveal that filamentous cells form network-like structures that depend crucially on the concentration of cells, the length distribution of the cells, and the degree of cohesion (stickiness) between cells. These bacterial networks display mechanical properties analogous to colloidal gels, e.g., collapse and fracture. Moving forward, two papers will result from the work undertaken during this project: 1 - a simulation study which is to be submitted immediately; and 2 - a joint experimental/simulation study which is a month or two away from being submitted. A PhD, through the Soft Matter and Functional Interfaces (SOFI) CDT has been awarded, and the proposed work is building on the work developed in this POC. At this stage, it is pending on a student from the CDT signing up for it. This work has strengthened the collaboration with Veolia who are involved in the SOFI PhD, and are sponsoring another PhD through the Edinburgh Earth, Ecology, and Environment Doctoral Training Partnership (E4 DTP), which will focus on the microbial generation of nitrous oxide in wastewater treatment. Again this is pending our applicant, who has interview on 25th Feb 2022, getting into the program.
Start Year 2020
 
Description NBIC POC 02POC19100 Bacterial networking; why it's not always beneficial to build bridges and make connections. (Gavin Melaugh) 
Organisation Veolia Environmental Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution We aim to use Comamonas denitrificans as a model system with which to understand how filamentous bacteria induce network formation in suspended microbial communities. This will provide Veolia UK with fundamental insight into how network formation occurs in their activated sludge flocs at Seafield WWTW in Edinburgh. This insight will facilitate the design of new methods that prevent (NBIC thematic area) microbial network formation as opposed to employing rather costly methods to treat the symptoms (sludge bulking). We plan to manipulate the concentration of filamentous cells in the suspension in a manner that reduces the propensity of the system to network. In the context of the NBIC thematic area of engineering, here, we will be making the first steps in designing a microbial suspension in which the mechanical interactions are optimised to prevent the formation of microbial networks. Insight from the model system will help us probe the fundamental science of microbial network formation in real activated sludge samples provided by Veolia. Building on the design concepts in this POC project, we will continue the collaboration via the application of larger grants. In this case, we will propose to engineer microbial consortia that maximise flocculation and settling, whilst minimising water retention in the sludge in order to reduce dewatering costs. The success of the POC project will be measured academically via the impact of the publications resulting from the fundamental science. This will provide a platform from which to apply for larger grants and fellowships, facilitating Gavin Melaugh's ambition of becoming a principal investigator. Progression from TRL 2 (beginning) to TRL 3 (end) will be a success from Veolia's perspective, providing a foundation with which to continue the collaboration longer term via the application of a Knowledge Transfer Partnership via Innovate UK with the view to progressing to TRL 4.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Edinburgh: This project demonstrated than Comamonas denitrificans, a bacteria isolated from activated sludge, could be used as a model organism with which to understand the aggregation/flocculation behaviour of filamentous bacteria. Experiments and simulations reveal that filamentous cells form network-like structures that depend crucially on the concentration of cells, the length distribution of the cells, and the degree of cohesion (stickiness) between cells. These bacterial networks display mechanical properties analogous to colloidal gels, e.g., collapse and fracture. Moving forward, two papers will result from the work undertaken during this project: 1 - a simulation study which is to be submitted immediately; and 2 - a joint experimental/simulation study which is a month or two away from being submitted. A PhD, through the Soft Matter and Functional Interfaces (SOFI) CDT has been awarded, and the proposed work is building on the work developed in this POC. At this stage, it is pending on a student from the CDT signing up for it. This work has strengthened the collaboration with Veolia who are involved in the SOFI PhD, and are sponsoring another PhD through the Edinburgh Earth, Ecology, and Environment Doctoral Training Partnership (E4 DTP), which will focus on the microbial generation of nitrous oxide in wastewater treatment. Again this is pending our applicant, who has interview on 25th Feb 2022, getting into the program.
Start Year 2020
 
Description NBIC POC 02POC19105 Developing passive RFID technology to monitor Candida albicans biofilm growth on medical devices (Campbell Gourlay) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Techniques used to identify the presence of a biofilm growing on a medical device surface usually requires its removal for sampling and organism identification. An ideal technology would allow constant monitoring of biofilm growth in situ and enable early detection to facilitate rapid treatment or unnecessary replacement. Such a technology should ideally be low cost, low maintenance and be adaptable to a variety of medical device surfaces without complex manufacturing processes. Our preliminary data supporting this application suggests that Radio Frequency Identification (RFID), an inexpensive and flexible technology in common everyday use, can be employed to detect yeast biofilm growth on devices in situ. RFID monitoring can be continuous and the signal is read remotely, conceivably at the bedside within a "smart hospital" setting or within the patient's home with updates or alerts sent to a relevant clinician. RFID sensor design can be tailored to detect changes in electrical properties of the biofilm, such as those that occur within different stages of maturation. RFID sensors can therefore be designed to recognize defined signatures that are easily recognized and highly reproducible. Our proposal aims to develop RFID as a promising biofilm detection technology and has the following TLR2 level aims: To optimise our current RFID Candida albicans biofilm detection sensor designs as adhesive "stickers" that can be applied to a range of tracheostomy tubing products (Figure 1). To test the ability of RFID biofilm detection stickers to monitor Candida albicans biofilm maturation in real time within a human body phantom.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Kent: - We achieved the development of a successful design that can be retrofitted to the surface of tubing of a variety of diameters. The design is passive (without a battery) and the antennae tuned so that a strong response achieved when a frequency of 860MHz is used (compatible with UK/UE clinical settings), this can easily be tuned to US or other frequencies for international use. The sensor was designed in silico and then constructed and tested in a gelatin phantom. The sensor was able to reproducibly report the growth of a fungal biofilm at a distance of 20cm outside of the phantom, which represents the human neck. - We have achieved the milestone aims of the PoC project. This has led to the production of a prototype sensor that can detect Candida albicans biofilms within a phantom. - The prototype development contains intellectual property that resides with the University of Kent. Further work is required to develop a product that will satisfy the needs of our Industrial partner to support a joint patent of this product. - Following this PoC work we have conducted several meetings with our industrial partner to plan the next stage. We will apply for further joint funding e.g. via the Royal Society Industrial fellowship scheme to further align our research interests in this area. The future work will focus on a properly manufactured sensor integrated within Smiths Medical devices to generate a functional prototype.
Start Year 2019
 
Description NBIC POC 02POC19105 Developing passive RFID technology to monitor Candida albicans biofilm growth on medical devices (Campbell Gourlay) 
Organisation Smiths Medical
Country United Kingdom 
Sector Private 
PI Contribution Techniques used to identify the presence of a biofilm growing on a medical device surface usually requires its removal for sampling and organism identification. An ideal technology would allow constant monitoring of biofilm growth in situ and enable early detection to facilitate rapid treatment or unnecessary replacement. Such a technology should ideally be low cost, low maintenance and be adaptable to a variety of medical device surfaces without complex manufacturing processes. Our preliminary data supporting this application suggests that Radio Frequency Identification (RFID), an inexpensive and flexible technology in common everyday use, can be employed to detect yeast biofilm growth on devices in situ. RFID monitoring can be continuous and the signal is read remotely, conceivably at the bedside within a "smart hospital" setting or within the patient's home with updates or alerts sent to a relevant clinician. RFID sensor design can be tailored to detect changes in electrical properties of the biofilm, such as those that occur within different stages of maturation. RFID sensors can therefore be designed to recognize defined signatures that are easily recognized and highly reproducible. Our proposal aims to develop RFID as a promising biofilm detection technology and has the following TLR2 level aims: To optimise our current RFID Candida albicans biofilm detection sensor designs as adhesive "stickers" that can be applied to a range of tracheostomy tubing products (Figure 1). To test the ability of RFID biofilm detection stickers to monitor Candida albicans biofilm maturation in real time within a human body phantom.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Kent: - We achieved the development of a successful design that can be retrofitted to the surface of tubing of a variety of diameters. The design is passive (without a battery) and the antennae tuned so that a strong response achieved when a frequency of 860MHz is used (compatible with UK/UE clinical settings), this can easily be tuned to US or other frequencies for international use. The sensor was designed in silico and then constructed and tested in a gelatin phantom. The sensor was able to reproducibly report the growth of a fungal biofilm at a distance of 20cm outside of the phantom, which represents the human neck. - We have achieved the milestone aims of the PoC project. This has led to the production of a prototype sensor that can detect Candida albicans biofilms within a phantom. - The prototype development contains intellectual property that resides with the University of Kent. Further work is required to develop a product that will satisfy the needs of our Industrial partner to support a joint patent of this product. - Following this PoC work we have conducted several meetings with our industrial partner to plan the next stage. We will apply for further joint funding e.g. via the Royal Society Industrial fellowship scheme to further align our research interests in this area. The future work will focus on a properly manufactured sensor integrated within Smiths Medical devices to generate a functional prototype.
Start Year 2019
 
Description NBIC POC 02POC19105 Developing passive RFID technology to monitor Candida albicans biofilm growth on medical devices (Campbell Gourlay) 
Organisation University of Kent
Country United Kingdom 
Sector Academic/University 
PI Contribution Techniques used to identify the presence of a biofilm growing on a medical device surface usually requires its removal for sampling and organism identification. An ideal technology would allow constant monitoring of biofilm growth in situ and enable early detection to facilitate rapid treatment or unnecessary replacement. Such a technology should ideally be low cost, low maintenance and be adaptable to a variety of medical device surfaces without complex manufacturing processes. Our preliminary data supporting this application suggests that Radio Frequency Identification (RFID), an inexpensive and flexible technology in common everyday use, can be employed to detect yeast biofilm growth on devices in situ. RFID monitoring can be continuous and the signal is read remotely, conceivably at the bedside within a "smart hospital" setting or within the patient's home with updates or alerts sent to a relevant clinician. RFID sensor design can be tailored to detect changes in electrical properties of the biofilm, such as those that occur within different stages of maturation. RFID sensors can therefore be designed to recognize defined signatures that are easily recognized and highly reproducible. Our proposal aims to develop RFID as a promising biofilm detection technology and has the following TLR2 level aims: To optimise our current RFID Candida albicans biofilm detection sensor designs as adhesive "stickers" that can be applied to a range of tracheostomy tubing products (Figure 1). To test the ability of RFID biofilm detection stickers to monitor Candida albicans biofilm maturation in real time within a human body phantom.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Kent: - We achieved the development of a successful design that can be retrofitted to the surface of tubing of a variety of diameters. The design is passive (without a battery) and the antennae tuned so that a strong response achieved when a frequency of 860MHz is used (compatible with UK/UE clinical settings), this can easily be tuned to US or other frequencies for international use. The sensor was designed in silico and then constructed and tested in a gelatin phantom. The sensor was able to reproducibly report the growth of a fungal biofilm at a distance of 20cm outside of the phantom, which represents the human neck. - We have achieved the milestone aims of the PoC project. This has led to the production of a prototype sensor that can detect Candida albicans biofilms within a phantom. - The prototype development contains intellectual property that resides with the University of Kent. Further work is required to develop a product that will satisfy the needs of our Industrial partner to support a joint patent of this product. - Following this PoC work we have conducted several meetings with our industrial partner to plan the next stage. We will apply for further joint funding e.g. via the Royal Society Industrial fellowship scheme to further align our research interests in this area. The future work will focus on a properly manufactured sensor integrated within Smiths Medical devices to generate a functional prototype.
Start Year 2019
 
Description NBIC POC 02POC19108 Label-free Multimodal Imaging Platform for Detection of Biofilms (Sumeet Mahajan) 
Organisation M Squared Lasers Ltd
Country United Kingdom 
Sector Private 
PI Contribution Problems being addressed: 1. The lack of consistent and rapid diagnostic approaches for the identification of bacterial biofilms and their species composition in clinical samples. 2. The lack of high resolution imaging platform for pharmaceutical testing of anti-biofilm treatments. Objective: To provide evidence that an integrated multimodal imaging platform based on advanced Raman spectroscopic imaging techniques can provide rapid and label-free identification of pathogenic bacteria within biofilms in clinical or industrial samples without sample processing. Scientific basis: An imaging system that can provide vibrational 'chemical' signatures from Raman techniques in a spectroscopic imaging manner (using resonance and coherent affects for rapid acquisition) and can also perform two-photon autofluorescence and second harmonic generation in a sequential manner has been setup in collaboration with the industrial partner that enables imaging in 3D of biological samples noninvasively and non-destructively. This will be used for in situ characterisation of biofilms including the extracellular matrix and functional activity (in case of live samples). We have evidence of species as well as strain-level differentiation using the label-free Raman approach (Fig.1 and Fig. 2). In figure 2, in particular we show that unsupervised classification of bacteria cultured from clinical isolates and laboratory strains of S. aureus and P aeroginosa is possible by using their Raman spectra (unpublished results). This project represents an exciting development in biofilm diagnostics with the integration of the existing detection technologies developed at Southampton and the volumetric approach of M Squared Life providing a new imaging platform that has the potential to offer rapid biofilm detection and enhanced understanding of their characteristics and responses, for instance, to image drug penetration and effect for developing novel anti-microbial strategies to counter AMR.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: - Most core milestones associated with the project were completed successfully. Only species differentiation of a co-species biofilm with CARS imaging remained unfulfilled; however, other CARS-imaging related milestones were successful. In particular, the development and optimisation of the multi-excitation Raman method and acquisition of the related datasets were achieved for planktonic bacteria. Additionally, validation of the method in simulated CF sputum was also achieved with high accuracy. Elucidation of drug-resistance profiles of S. aureus was also shown with 100% accuracy, even in the more complex sputum model. - The use of 785nm and 532nm excitations enabled the pre-resonance of two biomolecules within the bacteria in the study, creating pronounced spectral differences based on the excitation. Combining these two excitation wavelengths and using chemometric analyses, classification accuracies were greater than the accuracies achieved with either single excitation wavelength. For bacteria in artificial sputum, SVM was capable of 99.75% accuracy, with no inter-species classification errors and perfect differentiation of drug-sensitive and drug-resistant strains of S. aureus. - The two key outputs associated with this project are the multi-excitation Raman method that was developed, and the research paper and patent associated with it. These are currently in the process of being submitted. - We will carry the findings of this work forward and seek to apply the methods in a variety of other studies pertaining to label-free biofilm imaging and AMR profile determination. In particular, we hope to apply this information to CARS imaging of co-species biofilms, where the imaging of biomarkers associated with each species would allow label-free discrimination and localisation each species within the sample.
Start Year 2019
 
Description NBIC POC 02POC19108 Label-free Multimodal Imaging Platform for Detection of Biofilms (Sumeet Mahajan) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Problems being addressed: 1. The lack of consistent and rapid diagnostic approaches for the identification of bacterial biofilms and their species composition in clinical samples. 2. The lack of high resolution imaging platform for pharmaceutical testing of anti-biofilm treatments. Objective: To provide evidence that an integrated multimodal imaging platform based on advanced Raman spectroscopic imaging techniques can provide rapid and label-free identification of pathogenic bacteria within biofilms in clinical or industrial samples without sample processing. Scientific basis: An imaging system that can provide vibrational 'chemical' signatures from Raman techniques in a spectroscopic imaging manner (using resonance and coherent affects for rapid acquisition) and can also perform two-photon autofluorescence and second harmonic generation in a sequential manner has been setup in collaboration with the industrial partner that enables imaging in 3D of biological samples noninvasively and non-destructively. This will be used for in situ characterisation of biofilms including the extracellular matrix and functional activity (in case of live samples). We have evidence of species as well as strain-level differentiation using the label-free Raman approach (Fig.1 and Fig. 2). In figure 2, in particular we show that unsupervised classification of bacteria cultured from clinical isolates and laboratory strains of S. aureus and P aeroginosa is possible by using their Raman spectra (unpublished results). This project represents an exciting development in biofilm diagnostics with the integration of the existing detection technologies developed at Southampton and the volumetric approach of M Squared Life providing a new imaging platform that has the potential to offer rapid biofilm detection and enhanced understanding of their characteristics and responses, for instance, to image drug penetration and effect for developing novel anti-microbial strategies to counter AMR.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: - Most core milestones associated with the project were completed successfully. Only species differentiation of a co-species biofilm with CARS imaging remained unfulfilled; however, other CARS-imaging related milestones were successful. In particular, the development and optimisation of the multi-excitation Raman method and acquisition of the related datasets were achieved for planktonic bacteria. Additionally, validation of the method in simulated CF sputum was also achieved with high accuracy. Elucidation of drug-resistance profiles of S. aureus was also shown with 100% accuracy, even in the more complex sputum model. - The use of 785nm and 532nm excitations enabled the pre-resonance of two biomolecules within the bacteria in the study, creating pronounced spectral differences based on the excitation. Combining these two excitation wavelengths and using chemometric analyses, classification accuracies were greater than the accuracies achieved with either single excitation wavelength. For bacteria in artificial sputum, SVM was capable of 99.75% accuracy, with no inter-species classification errors and perfect differentiation of drug-sensitive and drug-resistant strains of S. aureus. - The two key outputs associated with this project are the multi-excitation Raman method that was developed, and the research paper and patent associated with it. These are currently in the process of being submitted. - We will carry the findings of this work forward and seek to apply the methods in a variety of other studies pertaining to label-free biofilm imaging and AMR profile determination. In particular, we hope to apply this information to CARS imaging of co-species biofilms, where the imaging of biomarkers associated with each species would allow label-free discrimination and localisation each species within the sample.
Start Year 2019
 
Description NBIC POC 02POC19108 Label-free Multimodal Imaging Platform for Detection of Biofilms (Sumeet Mahajan) 
Organisation University Hospital Southampton NHS Foundation Trust
Country United Kingdom 
Sector Hospitals 
PI Contribution Problems being addressed: 1. The lack of consistent and rapid diagnostic approaches for the identification of bacterial biofilms and their species composition in clinical samples. 2. The lack of high resolution imaging platform for pharmaceutical testing of anti-biofilm treatments. Objective: To provide evidence that an integrated multimodal imaging platform based on advanced Raman spectroscopic imaging techniques can provide rapid and label-free identification of pathogenic bacteria within biofilms in clinical or industrial samples without sample processing. Scientific basis: An imaging system that can provide vibrational 'chemical' signatures from Raman techniques in a spectroscopic imaging manner (using resonance and coherent affects for rapid acquisition) and can also perform two-photon autofluorescence and second harmonic generation in a sequential manner has been setup in collaboration with the industrial partner that enables imaging in 3D of biological samples noninvasively and non-destructively. This will be used for in situ characterisation of biofilms including the extracellular matrix and functional activity (in case of live samples). We have evidence of species as well as strain-level differentiation using the label-free Raman approach (Fig.1 and Fig. 2). In figure 2, in particular we show that unsupervised classification of bacteria cultured from clinical isolates and laboratory strains of S. aureus and P aeroginosa is possible by using their Raman spectra (unpublished results). This project represents an exciting development in biofilm diagnostics with the integration of the existing detection technologies developed at Southampton and the volumetric approach of M Squared Life providing a new imaging platform that has the potential to offer rapid biofilm detection and enhanced understanding of their characteristics and responses, for instance, to image drug penetration and effect for developing novel anti-microbial strategies to counter AMR.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: - Most core milestones associated with the project were completed successfully. Only species differentiation of a co-species biofilm with CARS imaging remained unfulfilled; however, other CARS-imaging related milestones were successful. In particular, the development and optimisation of the multi-excitation Raman method and acquisition of the related datasets were achieved for planktonic bacteria. Additionally, validation of the method in simulated CF sputum was also achieved with high accuracy. Elucidation of drug-resistance profiles of S. aureus was also shown with 100% accuracy, even in the more complex sputum model. - The use of 785nm and 532nm excitations enabled the pre-resonance of two biomolecules within the bacteria in the study, creating pronounced spectral differences based on the excitation. Combining these two excitation wavelengths and using chemometric analyses, classification accuracies were greater than the accuracies achieved with either single excitation wavelength. For bacteria in artificial sputum, SVM was capable of 99.75% accuracy, with no inter-species classification errors and perfect differentiation of drug-sensitive and drug-resistant strains of S. aureus. - The two key outputs associated with this project are the multi-excitation Raman method that was developed, and the research paper and patent associated with it. These are currently in the process of being submitted. - We will carry the findings of this work forward and seek to apply the methods in a variety of other studies pertaining to label-free biofilm imaging and AMR profile determination. In particular, we hope to apply this information to CARS imaging of co-species biofilms, where the imaging of biomarkers associated with each species would allow label-free discrimination and localisation each species within the sample.
Start Year 2019
 
Description NBIC POC 02POC19108 Label-free Multimodal Imaging Platform for Detection of Biofilms (Sumeet Mahajan) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Problems being addressed: 1. The lack of consistent and rapid diagnostic approaches for the identification of bacterial biofilms and their species composition in clinical samples. 2. The lack of high resolution imaging platform for pharmaceutical testing of anti-biofilm treatments. Objective: To provide evidence that an integrated multimodal imaging platform based on advanced Raman spectroscopic imaging techniques can provide rapid and label-free identification of pathogenic bacteria within biofilms in clinical or industrial samples without sample processing. Scientific basis: An imaging system that can provide vibrational 'chemical' signatures from Raman techniques in a spectroscopic imaging manner (using resonance and coherent affects for rapid acquisition) and can also perform two-photon autofluorescence and second harmonic generation in a sequential manner has been setup in collaboration with the industrial partner that enables imaging in 3D of biological samples noninvasively and non-destructively. This will be used for in situ characterisation of biofilms including the extracellular matrix and functional activity (in case of live samples). We have evidence of species as well as strain-level differentiation using the label-free Raman approach (Fig.1 and Fig. 2). In figure 2, in particular we show that unsupervised classification of bacteria cultured from clinical isolates and laboratory strains of S. aureus and P aeroginosa is possible by using their Raman spectra (unpublished results). This project represents an exciting development in biofilm diagnostics with the integration of the existing detection technologies developed at Southampton and the volumetric approach of M Squared Life providing a new imaging platform that has the potential to offer rapid biofilm detection and enhanced understanding of their characteristics and responses, for instance, to image drug penetration and effect for developing novel anti-microbial strategies to counter AMR.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: - Most core milestones associated with the project were completed successfully. Only species differentiation of a co-species biofilm with CARS imaging remained unfulfilled; however, other CARS-imaging related milestones were successful. In particular, the development and optimisation of the multi-excitation Raman method and acquisition of the related datasets were achieved for planktonic bacteria. Additionally, validation of the method in simulated CF sputum was also achieved with high accuracy. Elucidation of drug-resistance profiles of S. aureus was also shown with 100% accuracy, even in the more complex sputum model. - The use of 785nm and 532nm excitations enabled the pre-resonance of two biomolecules within the bacteria in the study, creating pronounced spectral differences based on the excitation. Combining these two excitation wavelengths and using chemometric analyses, classification accuracies were greater than the accuracies achieved with either single excitation wavelength. For bacteria in artificial sputum, SVM was capable of 99.75% accuracy, with no inter-species classification errors and perfect differentiation of drug-sensitive and drug-resistant strains of S. aureus. - The two key outputs associated with this project are the multi-excitation Raman method that was developed, and the research paper and patent associated with it. These are currently in the process of being submitted. - We will carry the findings of this work forward and seek to apply the methods in a variety of other studies pertaining to label-free biofilm imaging and AMR profile determination. In particular, we hope to apply this information to CARS imaging of co-species biofilms, where the imaging of biomarkers associated with each species would allow label-free discrimination and localisation each species within the sample.
Start Year 2019
 
Description NBIC POC 02POC19111 Rapid Screening Platform for Shortlisting Coatings Against Infection (Andrew Hamilton) 
Organisation Montana State University
Country United States 
Sector Academic/University 
PI Contribution The overall aim of this project is to establish a rapid screening platform in the form of a microfluidic chip to short list best coating options for tackling the biofilm formation in urological devices. At the University of Southampton (SOTON), we have successfully developed a high-throughput microfluidic screening platform to evaluate new stent architectures and surface modifications (e.g. coatings) by replicating the dynamic fluid flow conditions within a stented urinary tract. This test platform has allowed us to rapidly develop and evaluate patented (internationally) novel stent designs that significantly reduce (>90%) the deposition of encrusting particles. In this project, we will (1) leverage our platform to assess the ability of new coating materials to resist encrustation and biofilm formation on stents, and (2) extend the capabilities of our platform to include in vitro biological testing of microbial cell-device interactions and chemical processes. New coating materials in the form of multilayer composites will be manufactured by depositing nanoscale layers onto the surface of urinary stent products. The combination of layers with different chemical compositions will enable multilayer coatings exhibiting antimicrobial activity via multiple mechanisms including bactericidal, anti-adhesive, and erodible surfaces. Success of deliverables will lead to the establishment of the first rapid screening platform (attached figure) in short listing coating options to allow biofilms prevention in urological devices. It is envisaged that the developed platform will have significant potential for translation into research and development (R&D) and clinical laboratories not only in urological devices but also knee and hip implants.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The plan and expected outcomes were impacted due to COVID laboratory closures or reduced access. Despite this, our team adapted to the limitations and delivered the project with small variations in specific activities. Additionally, we recruited a post-graduate research (PGR) student to continue the project, and utilised the partnerships formed (and the contractual agreement signed) to raise follow on funding (both internally and externally) from EPSRC IAA and NIHR i4i PDA. The completed milestones associated with each work package (WP1, 2, 3) are: WP1: Literature review completed, and candidate coating materials identified. The article has been invited (by the editor) for submission to a special issue of MDPI journal on the topic of "Hybrid Polyelectrolyte Multilayer Films: Fabrication, Properties and Applications". WP2: CFD simulations conducted to assess impact of coating materials with enhanced permeability. Microfluidic manufacture and bacterial cell culture prevented due to COVID lab access restrictions. WP3: Deposition of coatings on completed onto static well plates to assess antimicrobial effects of various coatings. The team defined a PGR project (Title: Layer by layer (LBL) coating on urological devices to prevent biofilm formation and encrustation) and recruited a student who started in July. The PGR is continuing the static cell work, and is planning to continue plans from this NBIC project for dynamic cell work using microfluidic devices Moreover, NBIC network has enabled us to apply for following funding to continue partnerships build within the projects funded by NBIC so far. - EPSRC Impact Acceleration Account (IAA) 2021 - 2022 ACCELERATING IMPACT FUNDING "Finalising The Business Case and Realising External Investment For University Created Innovative Urological Products". Amount: £ 62,790.00 - Dates: 04/01/2021 to 31/01/2022 - NIHR i4i PDA Call 21 "Can novel ureteric stents offer a better patient outcome compared to existing standard ureteric stents (CASSETTE)". Amount £1,375,896.00 - Dates: 01/01/2022 to 31/12/2024 (Intend to fund letter received and we are working on legal and contractual aspect of the project before finalising the start date and receiving the award letter). The successful delivery of these will provide a pathway for our research translation to real world, impacting patients' quality of life. NBIC has a fantastic continually growing network of experts both scientific and industrial, clinical and non-clinical field. Future work: • Publish review article "Recent developments and opportunities in layer-by-layer assembled coatings to prevent device-associated urinary tract infections: A review" • Publish research article on coating manufacture, characterisation, and cell work. • Continue work on coating deposition, characterisation, static cell culture through the existing PGR project. Extend this work to dynamic cell culture in microfluidic devices. • Seek protection and commercialisation of potential IP related to coatings, microfluidic rapid screening devices. • Seek funding to support and extend ongoing PGR project work - we have applied for an IfLS PhD Studentship for this purpose. • Seek larger-scale funding to support a larger research team and expanded technical efforts on coatings, microfluidic rapid screening devices.
Start Year 2019
 
Description NBIC POC 02POC19111 Rapid Screening Platform for Shortlisting Coatings Against Infection (Andrew Hamilton) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall aim of this project is to establish a rapid screening platform in the form of a microfluidic chip to short list best coating options for tackling the biofilm formation in urological devices. At the University of Southampton (SOTON), we have successfully developed a high-throughput microfluidic screening platform to evaluate new stent architectures and surface modifications (e.g. coatings) by replicating the dynamic fluid flow conditions within a stented urinary tract. This test platform has allowed us to rapidly develop and evaluate patented (internationally) novel stent designs that significantly reduce (>90%) the deposition of encrusting particles. In this project, we will (1) leverage our platform to assess the ability of new coating materials to resist encrustation and biofilm formation on stents, and (2) extend the capabilities of our platform to include in vitro biological testing of microbial cell-device interactions and chemical processes. New coating materials in the form of multilayer composites will be manufactured by depositing nanoscale layers onto the surface of urinary stent products. The combination of layers with different chemical compositions will enable multilayer coatings exhibiting antimicrobial activity via multiple mechanisms including bactericidal, anti-adhesive, and erodible surfaces. Success of deliverables will lead to the establishment of the first rapid screening platform (attached figure) in short listing coating options to allow biofilms prevention in urological devices. It is envisaged that the developed platform will have significant potential for translation into research and development (R&D) and clinical laboratories not only in urological devices but also knee and hip implants.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The plan and expected outcomes were impacted due to COVID laboratory closures or reduced access. Despite this, our team adapted to the limitations and delivered the project with small variations in specific activities. Additionally, we recruited a post-graduate research (PGR) student to continue the project, and utilised the partnerships formed (and the contractual agreement signed) to raise follow on funding (both internally and externally) from EPSRC IAA and NIHR i4i PDA. The completed milestones associated with each work package (WP1, 2, 3) are: WP1: Literature review completed, and candidate coating materials identified. The article has been invited (by the editor) for submission to a special issue of MDPI journal on the topic of "Hybrid Polyelectrolyte Multilayer Films: Fabrication, Properties and Applications". WP2: CFD simulations conducted to assess impact of coating materials with enhanced permeability. Microfluidic manufacture and bacterial cell culture prevented due to COVID lab access restrictions. WP3: Deposition of coatings on completed onto static well plates to assess antimicrobial effects of various coatings. The team defined a PGR project (Title: Layer by layer (LBL) coating on urological devices to prevent biofilm formation and encrustation) and recruited a student who started in July. The PGR is continuing the static cell work, and is planning to continue plans from this NBIC project for dynamic cell work using microfluidic devices Moreover, NBIC network has enabled us to apply for following funding to continue partnerships build within the projects funded by NBIC so far. - EPSRC Impact Acceleration Account (IAA) 2021 - 2022 ACCELERATING IMPACT FUNDING "Finalising The Business Case and Realising External Investment For University Created Innovative Urological Products". Amount: £ 62,790.00 - Dates: 04/01/2021 to 31/01/2022 - NIHR i4i PDA Call 21 "Can novel ureteric stents offer a better patient outcome compared to existing standard ureteric stents (CASSETTE)". Amount £1,375,896.00 - Dates: 01/01/2022 to 31/12/2024 (Intend to fund letter received and we are working on legal and contractual aspect of the project before finalising the start date and receiving the award letter). The successful delivery of these will provide a pathway for our research translation to real world, impacting patients' quality of life. NBIC has a fantastic continually growing network of experts both scientific and industrial, clinical and non-clinical field. Future work: • Publish review article "Recent developments and opportunities in layer-by-layer assembled coatings to prevent device-associated urinary tract infections: A review" • Publish research article on coating manufacture, characterisation, and cell work. • Continue work on coating deposition, characterisation, static cell culture through the existing PGR project. Extend this work to dynamic cell culture in microfluidic devices. • Seek protection and commercialisation of potential IP related to coatings, microfluidic rapid screening devices. • Seek funding to support and extend ongoing PGR project work - we have applied for an IfLS PhD Studentship for this purpose. • Seek larger-scale funding to support a larger research team and expanded technical efforts on coatings, microfluidic rapid screening devices.
Start Year 2019
 
Description NBIC POC 02POC19111 Rapid Screening Platform for Shortlisting Coatings Against Infection (Andrew Hamilton) 
Organisation Public Health England
Country United Kingdom 
Sector Public 
PI Contribution The overall aim of this project is to establish a rapid screening platform in the form of a microfluidic chip to short list best coating options for tackling the biofilm formation in urological devices. At the University of Southampton (SOTON), we have successfully developed a high-throughput microfluidic screening platform to evaluate new stent architectures and surface modifications (e.g. coatings) by replicating the dynamic fluid flow conditions within a stented urinary tract. This test platform has allowed us to rapidly develop and evaluate patented (internationally) novel stent designs that significantly reduce (>90%) the deposition of encrusting particles. In this project, we will (1) leverage our platform to assess the ability of new coating materials to resist encrustation and biofilm formation on stents, and (2) extend the capabilities of our platform to include in vitro biological testing of microbial cell-device interactions and chemical processes. New coating materials in the form of multilayer composites will be manufactured by depositing nanoscale layers onto the surface of urinary stent products. The combination of layers with different chemical compositions will enable multilayer coatings exhibiting antimicrobial activity via multiple mechanisms including bactericidal, anti-adhesive, and erodible surfaces. Success of deliverables will lead to the establishment of the first rapid screening platform (attached figure) in short listing coating options to allow biofilms prevention in urological devices. It is envisaged that the developed platform will have significant potential for translation into research and development (R&D) and clinical laboratories not only in urological devices but also knee and hip implants.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The plan and expected outcomes were impacted due to COVID laboratory closures or reduced access. Despite this, our team adapted to the limitations and delivered the project with small variations in specific activities. Additionally, we recruited a post-graduate research (PGR) student to continue the project, and utilised the partnerships formed (and the contractual agreement signed) to raise follow on funding (both internally and externally) from EPSRC IAA and NIHR i4i PDA. The completed milestones associated with each work package (WP1, 2, 3) are: WP1: Literature review completed, and candidate coating materials identified. The article has been invited (by the editor) for submission to a special issue of MDPI journal on the topic of "Hybrid Polyelectrolyte Multilayer Films: Fabrication, Properties and Applications". WP2: CFD simulations conducted to assess impact of coating materials with enhanced permeability. Microfluidic manufacture and bacterial cell culture prevented due to COVID lab access restrictions. WP3: Deposition of coatings on completed onto static well plates to assess antimicrobial effects of various coatings. The team defined a PGR project (Title: Layer by layer (LBL) coating on urological devices to prevent biofilm formation and encrustation) and recruited a student who started in July. The PGR is continuing the static cell work, and is planning to continue plans from this NBIC project for dynamic cell work using microfluidic devices Moreover, NBIC network has enabled us to apply for following funding to continue partnerships build within the projects funded by NBIC so far. - EPSRC Impact Acceleration Account (IAA) 2021 - 2022 ACCELERATING IMPACT FUNDING "Finalising The Business Case and Realising External Investment For University Created Innovative Urological Products". Amount: £ 62,790.00 - Dates: 04/01/2021 to 31/01/2022 - NIHR i4i PDA Call 21 "Can novel ureteric stents offer a better patient outcome compared to existing standard ureteric stents (CASSETTE)". Amount £1,375,896.00 - Dates: 01/01/2022 to 31/12/2024 (Intend to fund letter received and we are working on legal and contractual aspect of the project before finalising the start date and receiving the award letter). The successful delivery of these will provide a pathway for our research translation to real world, impacting patients' quality of life. NBIC has a fantastic continually growing network of experts both scientific and industrial, clinical and non-clinical field. Future work: • Publish review article "Recent developments and opportunities in layer-by-layer assembled coatings to prevent device-associated urinary tract infections: A review" • Publish research article on coating manufacture, characterisation, and cell work. • Continue work on coating deposition, characterisation, static cell culture through the existing PGR project. Extend this work to dynamic cell culture in microfluidic devices. • Seek protection and commercialisation of potential IP related to coatings, microfluidic rapid screening devices. • Seek funding to support and extend ongoing PGR project work - we have applied for an IfLS PhD Studentship for this purpose. • Seek larger-scale funding to support a larger research team and expanded technical efforts on coatings, microfluidic rapid screening devices.
Start Year 2019
 
Description NBIC POC 02POC19111 Rapid Screening Platform for Shortlisting Coatings Against Infection (Andrew Hamilton) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall aim of this project is to establish a rapid screening platform in the form of a microfluidic chip to short list best coating options for tackling the biofilm formation in urological devices. At the University of Southampton (SOTON), we have successfully developed a high-throughput microfluidic screening platform to evaluate new stent architectures and surface modifications (e.g. coatings) by replicating the dynamic fluid flow conditions within a stented urinary tract. This test platform has allowed us to rapidly develop and evaluate patented (internationally) novel stent designs that significantly reduce (>90%) the deposition of encrusting particles. In this project, we will (1) leverage our platform to assess the ability of new coating materials to resist encrustation and biofilm formation on stents, and (2) extend the capabilities of our platform to include in vitro biological testing of microbial cell-device interactions and chemical processes. New coating materials in the form of multilayer composites will be manufactured by depositing nanoscale layers onto the surface of urinary stent products. The combination of layers with different chemical compositions will enable multilayer coatings exhibiting antimicrobial activity via multiple mechanisms including bactericidal, anti-adhesive, and erodible surfaces. Success of deliverables will lead to the establishment of the first rapid screening platform (attached figure) in short listing coating options to allow biofilms prevention in urological devices. It is envisaged that the developed platform will have significant potential for translation into research and development (R&D) and clinical laboratories not only in urological devices but also knee and hip implants.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Southampton: The plan and expected outcomes were impacted due to COVID laboratory closures or reduced access. Despite this, our team adapted to the limitations and delivered the project with small variations in specific activities. Additionally, we recruited a post-graduate research (PGR) student to continue the project, and utilised the partnerships formed (and the contractual agreement signed) to raise follow on funding (both internally and externally) from EPSRC IAA and NIHR i4i PDA. The completed milestones associated with each work package (WP1, 2, 3) are: WP1: Literature review completed, and candidate coating materials identified. The article has been invited (by the editor) for submission to a special issue of MDPI journal on the topic of "Hybrid Polyelectrolyte Multilayer Films: Fabrication, Properties and Applications". WP2: CFD simulations conducted to assess impact of coating materials with enhanced permeability. Microfluidic manufacture and bacterial cell culture prevented due to COVID lab access restrictions. WP3: Deposition of coatings on completed onto static well plates to assess antimicrobial effects of various coatings. The team defined a PGR project (Title: Layer by layer (LBL) coating on urological devices to prevent biofilm formation and encrustation) and recruited a student who started in July. The PGR is continuing the static cell work, and is planning to continue plans from this NBIC project for dynamic cell work using microfluidic devices Moreover, NBIC network has enabled us to apply for following funding to continue partnerships build within the projects funded by NBIC so far. - EPSRC Impact Acceleration Account (IAA) 2021 - 2022 ACCELERATING IMPACT FUNDING "Finalising The Business Case and Realising External Investment For University Created Innovative Urological Products". Amount: £ 62,790.00 - Dates: 04/01/2021 to 31/01/2022 - NIHR i4i PDA Call 21 "Can novel ureteric stents offer a better patient outcome compared to existing standard ureteric stents (CASSETTE)". Amount £1,375,896.00 - Dates: 01/01/2022 to 31/12/2024 (Intend to fund letter received and we are working on legal and contractual aspect of the project before finalising the start date and receiving the award letter). The successful delivery of these will provide a pathway for our research translation to real world, impacting patients' quality of life. NBIC has a fantastic continually growing network of experts both scientific and industrial, clinical and non-clinical field. Future work: • Publish review article "Recent developments and opportunities in layer-by-layer assembled coatings to prevent device-associated urinary tract infections: A review" • Publish research article on coating manufacture, characterisation, and cell work. • Continue work on coating deposition, characterisation, static cell culture through the existing PGR project. Extend this work to dynamic cell culture in microfluidic devices. • Seek protection and commercialisation of potential IP related to coatings, microfluidic rapid screening devices. • Seek funding to support and extend ongoing PGR project work - we have applied for an IfLS PhD Studentship for this purpose. • Seek larger-scale funding to support a larger research team and expanded technical efforts on coatings, microfluidic rapid screening devices.
Start Year 2019
 
Description NBIC POC 02POC19116 Advanced Biofilm Removal mediated by Targeted Microbubbles Generated by Fluidic Oscillation. (William Zimmerman) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Biofilm formation and subsequent removal is a significant problem in several applications such as fermenters, bioreactors, and pharmaceuticals. Desai and Zimmerman have invented a novel fluidic oscillator for low cost high throughput microbubble generation. The oscillator (DZFO) is a no-moving part device that generates microbubbles via conversion of steady flow into oscillatory flow. Chemicals in water, if ionic, tend to disassociate in water and get organised on the microbubble surface. These microbubbles are inexpensive. Microbubbles previously have shown surface cleaning characteristics due to the insonant US field (Leighton et al, @Southampton). We would like to design and develop a system capable of generating these oscillating microbubbles using the DZFO having a lower energy with additional parameters such as chemical moieties on the microbubble surface, to provide an additional microparticle bead cleaning effect. This technology would be used for both static and dynamic biofilm cleaning which is then applicable to several sectors. We would like to test microbubbles to remove biofilms in continuous processes in fermentation, pharmaceutical, bioreactor, and food processing. Perlemax, also as an end user would like to take this technology for developing on this hypothesis and pushing it up the TRL ladder. Preliminary tests have been done to show visually the biofilm removal with significant efficacy using fluidic oscillator mediated microbubbles when used in clean water. Additional chemical moieties on microbubble surface have resulted in additional cleaning action with reduced processing time but assessed visually. TUoS with the state of the art facility and expertise of Mukherjee, using the Perlemax technology and expertise, will test this hypothesis and will pursue a proper scientific and analytical study using confocal, SEM, and other physicochemical characterisations, to demonstrate unequivocally the efficiency of this hypothesis and its application to industrial processes and demonstrate biofilm removal efficiency in a scientific manner.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The University of Sheffield: - The overall objective of this project was to test the biofilm removal efficiency using microbubbles generated from the DZFO. Our initial plan was to test a range of biofilms from static to dynamic, lab culture single and multi-species biofilm to environmental biofilms. Due to the COVID-19 outbreak, this was not completely accomplished. The environmental and multispecies biofilm is still left to be explored, which we hope to achieve with future grants based on the initial success we have achieved in this research. - The results presented have been discussed with the BRITEST pharma and chemicals sector consortium and are expected to be highlighted in the April 2021 symposium on Cleaning and Decontamination hosted by the UK Fluids Network. - The key findings in this research are that biofilm removal is very effective using DZFO microbubbles, where biofilm is removed in less than 3 minutes for a 1 day old biofilm and about 10 minutes on an average for a 5 days old biofilm. This is a significant success as compared to work done by Agarwal et al, where they could remove biofilm less effectively but requiring one hour of processing time. - Dynamic sparging in media simulant was very effective in biofilm removal thereby demonstrating the utility for online continuous biofilm removal in a bioreactor, when compared to an offline maintenance cycle solution - 0.01% surfactant. - Next steps: 1. Further grant application to test these valuable findings onto several environmental biofilms. Also test some of the mixed culture biofilm, which are more relevant to the pharmaceutical sector. 2. Based on these results we would like to collaborate with pharmaceutical industries to work on their biofilm related problems. 3. In this period of 6 months in this research, we have discussed with researchers in the water industry, where they have expressed interests in future collaboration in their biofilm research in pipes. We are hopeful in future collaboration with the water industry. 4. In the meantime TUoS and Perlemax with the guidance of Prof. Zimmerman and Dr. Desai would like to finish some of the unfinished jobs in this research due to COVID-19 related closure, with the help of interns/apprentices/trainees in Perlemax labs and future Masters Students in TUoS labs. The protocols set up for imaging these biofilms will be sufficient for the students and interns to be able to work with. 5. We would also like to publish the data in a good impact factor journal.
Start Year 2019
 
Description NBIC POC 02POC19116 Advanced Biofilm Removal mediated by Targeted Microbubbles Generated by Fluidic Oscillation. (William Zimmerman) 
Organisation Perlemax
Country United Kingdom 
Sector Private 
PI Contribution Biofilm formation and subsequent removal is a significant problem in several applications such as fermenters, bioreactors, and pharmaceuticals. Desai and Zimmerman have invented a novel fluidic oscillator for low cost high throughput microbubble generation. The oscillator (DZFO) is a no-moving part device that generates microbubbles via conversion of steady flow into oscillatory flow. Chemicals in water, if ionic, tend to disassociate in water and get organised on the microbubble surface. These microbubbles are inexpensive. Microbubbles previously have shown surface cleaning characteristics due to the insonant US field (Leighton et al, @Southampton). We would like to design and develop a system capable of generating these oscillating microbubbles using the DZFO having a lower energy with additional parameters such as chemical moieties on the microbubble surface, to provide an additional microparticle bead cleaning effect. This technology would be used for both static and dynamic biofilm cleaning which is then applicable to several sectors. We would like to test microbubbles to remove biofilms in continuous processes in fermentation, pharmaceutical, bioreactor, and food processing. Perlemax, also as an end user would like to take this technology for developing on this hypothesis and pushing it up the TRL ladder. Preliminary tests have been done to show visually the biofilm removal with significant efficacy using fluidic oscillator mediated microbubbles when used in clean water. Additional chemical moieties on microbubble surface have resulted in additional cleaning action with reduced processing time but assessed visually. TUoS with the state of the art facility and expertise of Mukherjee, using the Perlemax technology and expertise, will test this hypothesis and will pursue a proper scientific and analytical study using confocal, SEM, and other physicochemical characterisations, to demonstrate unequivocally the efficiency of this hypothesis and its application to industrial processes and demonstrate biofilm removal efficiency in a scientific manner.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The University of Sheffield: - The overall objective of this project was to test the biofilm removal efficiency using microbubbles generated from the DZFO. Our initial plan was to test a range of biofilms from static to dynamic, lab culture single and multi-species biofilm to environmental biofilms. Due to the COVID-19 outbreak, this was not completely accomplished. The environmental and multispecies biofilm is still left to be explored, which we hope to achieve with future grants based on the initial success we have achieved in this research. - The results presented have been discussed with the BRITEST pharma and chemicals sector consortium and are expected to be highlighted in the April 2021 symposium on Cleaning and Decontamination hosted by the UK Fluids Network. - The key findings in this research are that biofilm removal is very effective using DZFO microbubbles, where biofilm is removed in less than 3 minutes for a 1 day old biofilm and about 10 minutes on an average for a 5 days old biofilm. This is a significant success as compared to work done by Agarwal et al, where they could remove biofilm less effectively but requiring one hour of processing time. - Dynamic sparging in media simulant was very effective in biofilm removal thereby demonstrating the utility for online continuous biofilm removal in a bioreactor, when compared to an offline maintenance cycle solution - 0.01% surfactant. - Next steps: 1. Further grant application to test these valuable findings onto several environmental biofilms. Also test some of the mixed culture biofilm, which are more relevant to the pharmaceutical sector. 2. Based on these results we would like to collaborate with pharmaceutical industries to work on their biofilm related problems. 3. In this period of 6 months in this research, we have discussed with researchers in the water industry, where they have expressed interests in future collaboration in their biofilm research in pipes. We are hopeful in future collaboration with the water industry. 4. In the meantime TUoS and Perlemax with the guidance of Prof. Zimmerman and Dr. Desai would like to finish some of the unfinished jobs in this research due to COVID-19 related closure, with the help of interns/apprentices/trainees in Perlemax labs and future Masters Students in TUoS labs. The protocols set up for imaging these biofilms will be sufficient for the students and interns to be able to work with. 5. We would also like to publish the data in a good impact factor journal.
Start Year 2019
 
Description NBIC POC 02POC19116 Advanced Biofilm Removal mediated by Targeted Microbubbles Generated by Fluidic Oscillation. (William Zimmerman) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Biofilm formation and subsequent removal is a significant problem in several applications such as fermenters, bioreactors, and pharmaceuticals. Desai and Zimmerman have invented a novel fluidic oscillator for low cost high throughput microbubble generation. The oscillator (DZFO) is a no-moving part device that generates microbubbles via conversion of steady flow into oscillatory flow. Chemicals in water, if ionic, tend to disassociate in water and get organised on the microbubble surface. These microbubbles are inexpensive. Microbubbles previously have shown surface cleaning characteristics due to the insonant US field (Leighton et al, @Southampton). We would like to design and develop a system capable of generating these oscillating microbubbles using the DZFO having a lower energy with additional parameters such as chemical moieties on the microbubble surface, to provide an additional microparticle bead cleaning effect. This technology would be used for both static and dynamic biofilm cleaning which is then applicable to several sectors. We would like to test microbubbles to remove biofilms in continuous processes in fermentation, pharmaceutical, bioreactor, and food processing. Perlemax, also as an end user would like to take this technology for developing on this hypothesis and pushing it up the TRL ladder. Preliminary tests have been done to show visually the biofilm removal with significant efficacy using fluidic oscillator mediated microbubbles when used in clean water. Additional chemical moieties on microbubble surface have resulted in additional cleaning action with reduced processing time but assessed visually. TUoS with the state of the art facility and expertise of Mukherjee, using the Perlemax technology and expertise, will test this hypothesis and will pursue a proper scientific and analytical study using confocal, SEM, and other physicochemical characterisations, to demonstrate unequivocally the efficiency of this hypothesis and its application to industrial processes and demonstrate biofilm removal efficiency in a scientific manner.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from The University of Sheffield: - The overall objective of this project was to test the biofilm removal efficiency using microbubbles generated from the DZFO. Our initial plan was to test a range of biofilms from static to dynamic, lab culture single and multi-species biofilm to environmental biofilms. Due to the COVID-19 outbreak, this was not completely accomplished. The environmental and multispecies biofilm is still left to be explored, which we hope to achieve with future grants based on the initial success we have achieved in this research. - The results presented have been discussed with the BRITEST pharma and chemicals sector consortium and are expected to be highlighted in the April 2021 symposium on Cleaning and Decontamination hosted by the UK Fluids Network. - The key findings in this research are that biofilm removal is very effective using DZFO microbubbles, where biofilm is removed in less than 3 minutes for a 1 day old biofilm and about 10 minutes on an average for a 5 days old biofilm. This is a significant success as compared to work done by Agarwal et al, where they could remove biofilm less effectively but requiring one hour of processing time. - Dynamic sparging in media simulant was very effective in biofilm removal thereby demonstrating the utility for online continuous biofilm removal in a bioreactor, when compared to an offline maintenance cycle solution - 0.01% surfactant. - Next steps: 1. Further grant application to test these valuable findings onto several environmental biofilms. Also test some of the mixed culture biofilm, which are more relevant to the pharmaceutical sector. 2. Based on these results we would like to collaborate with pharmaceutical industries to work on their biofilm related problems. 3. In this period of 6 months in this research, we have discussed with researchers in the water industry, where they have expressed interests in future collaboration in their biofilm research in pipes. We are hopeful in future collaboration with the water industry. 4. In the meantime TUoS and Perlemax with the guidance of Prof. Zimmerman and Dr. Desai would like to finish some of the unfinished jobs in this research due to COVID-19 related closure, with the help of interns/apprentices/trainees in Perlemax labs and future Masters Students in TUoS labs. The protocols set up for imaging these biofilms will be sufficient for the students and interns to be able to work with. 5. We would also like to publish the data in a good impact factor journal.
Start Year 2019
 
Description NBIC POC 02POC19126 Automated in-situ detection and monitoring of marine biofilm erosion and mechanical properties via custom optical coherence tomography (OCT) (Jinju Chen) 
Organisation AkzoNobel
Department AkzoNobel UK
Country United Kingdom 
Sector Private 
PI Contribution Ships are fouled by marine biofilms, resulting in increased frictional drag and fuel penalties. However, as not all biofilm drag is equally costly, "low drag" microfouling may be an acceptable loss to some ship operators. Fouling control coatings minimise biofilm drag by minimising biofilm load. Biofilm disruption by a sustained burst of speed (>> average operational speed) may provide operators with a means of fouling management. Flow conditions during biofilm formation affect growth, mechanical properties and resilience to mechanical disruption. Hydrodynamic stress can cause biofilm erosion and detachment, leading to lower profile, lower drag biofilms. Biomass loss patterns are likely related to various physico-mechanical properties of biofilms such as viscoelasticity, biofilm cohesion, adhesion to the surface, and roughness profiles. This project will relate the resilience of biofilm to disruption in shear and biofilm frictional drag to mechanical properties of biofilms. We will test how: 1. flow conditions during growth influence biomechanical properties and frictional drag of marine biofilm formed on different antifouling surfaces; 2. biofilm biophysical properties determine biofilm erosion in high flow; 3. biofilm frictional drag changes as biofilm structure, extent and biophysical parameters change. Our experimental approach addresses the disparity between the scales at which drag is measured (metre scale flow cell) and the scale at which physico-mechanical measurements are collected (micro to millimetre scale) by imaging hundreds of fields of view along the lengths of fouled drag test pieces. Optical coherence tomography images of biofilms will be collected with a fully automated micropositioning system. While a novel, co-registered air-jet indenter recently developed at Newcastle will be adopted for non-destructive determination of biofilm viscoelasticity at the exact positions where erosion is measured. The outcomes will be: 1) shortened timescale for screening the antifouling surfaces; and 2) pilot experimental data for validating in-house computational models of biofilm erosion in flow.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Newcastle University: - We have achieved the project objectives as planned. - We have validated the air-jet system and has successfully designed and manufactured the bespoken automated stage to accommodate both air-jet indenter and OCT. This new system has been successfully deployed to measure marine biofilms. - The air-jet was manufactured, and the test results were validated against hydrogels tested by another commercial mechanical testing rig (rheometer). The in-house designed bespoken automated stage has been manufactured and deployed for biofilm imaging and testing. The in-house designed software has been developed to couple air-jet, OCT and automated stage. The new coupled automated bioimaging and biomechanical testing system has been adopted to obtain biofilm microstructure and mechanics for marine biofilms. - We are applying IP protection for this unique automated imaging and test rigs for biofilms. The patent paperwork is in progress. - We are planning to write a paper on biofilm mechanics for a well regarded journal (Biotechnology and Bioengineering). We have secured another NBIC grant (3rd round POC) and have tried DARPA (outline proposal submitted, not funded). We just submitted an EPSRC IAA to exploit its wider industrial applications. - NBIC always responded the question promptly. We are very pleased with the NBIC POC process. The NBIC staff are remarkably supportive and helpful. We are extremely impressed with the tremendous support from NBIC in a timely manner when the COVID has significantly impacted the project (e.g. lab closure and researchers infected by COVID).
Start Year 2020
 
Description NBIC POC 02POC19126 Automated in-situ detection and monitoring of marine biofilm erosion and mechanical properties via custom optical coherence tomography (OCT) (Jinju Chen) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Ships are fouled by marine biofilms, resulting in increased frictional drag and fuel penalties. However, as not all biofilm drag is equally costly, "low drag" microfouling may be an acceptable loss to some ship operators. Fouling control coatings minimise biofilm drag by minimising biofilm load. Biofilm disruption by a sustained burst of speed (>> average operational speed) may provide operators with a means of fouling management. Flow conditions during biofilm formation affect growth, mechanical properties and resilience to mechanical disruption. Hydrodynamic stress can cause biofilm erosion and detachment, leading to lower profile, lower drag biofilms. Biomass loss patterns are likely related to various physico-mechanical properties of biofilms such as viscoelasticity, biofilm cohesion, adhesion to the surface, and roughness profiles. This project will relate the resilience of biofilm to disruption in shear and biofilm frictional drag to mechanical properties of biofilms. We will test how: 1. flow conditions during growth influence biomechanical properties and frictional drag of marine biofilm formed on different antifouling surfaces; 2. biofilm biophysical properties determine biofilm erosion in high flow; 3. biofilm frictional drag changes as biofilm structure, extent and biophysical parameters change. Our experimental approach addresses the disparity between the scales at which drag is measured (metre scale flow cell) and the scale at which physico-mechanical measurements are collected (micro to millimetre scale) by imaging hundreds of fields of view along the lengths of fouled drag test pieces. Optical coherence tomography images of biofilms will be collected with a fully automated micropositioning system. While a novel, co-registered air-jet indenter recently developed at Newcastle will be adopted for non-destructive determination of biofilm viscoelasticity at the exact positions where erosion is measured. The outcomes will be: 1) shortened timescale for screening the antifouling surfaces; and 2) pilot experimental data for validating in-house computational models of biofilm erosion in flow.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Newcastle University: - We have achieved the project objectives as planned. - We have validated the air-jet system and has successfully designed and manufactured the bespoken automated stage to accommodate both air-jet indenter and OCT. This new system has been successfully deployed to measure marine biofilms. - The air-jet was manufactured, and the test results were validated against hydrogels tested by another commercial mechanical testing rig (rheometer). The in-house designed bespoken automated stage has been manufactured and deployed for biofilm imaging and testing. The in-house designed software has been developed to couple air-jet, OCT and automated stage. The new coupled automated bioimaging and biomechanical testing system has been adopted to obtain biofilm microstructure and mechanics for marine biofilms. - We are applying IP protection for this unique automated imaging and test rigs for biofilms. The patent paperwork is in progress. - We are planning to write a paper on biofilm mechanics for a well regarded journal (Biotechnology and Bioengineering). We have secured another NBIC grant (3rd round POC) and have tried DARPA (outline proposal submitted, not funded). We just submitted an EPSRC IAA to exploit its wider industrial applications. - NBIC always responded the question promptly. We are very pleased with the NBIC POC process. The NBIC staff are remarkably supportive and helpful. We are extremely impressed with the tremendous support from NBIC in a timely manner when the COVID has significantly impacted the project (e.g. lab closure and researchers infected by COVID).
Start Year 2020
 
Description NBIC POC 02POC19126 Automated in-situ detection and monitoring of marine biofilm erosion and mechanical properties via custom optical coherence tomography (OCT) (Jinju Chen) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution Ships are fouled by marine biofilms, resulting in increased frictional drag and fuel penalties. However, as not all biofilm drag is equally costly, "low drag" microfouling may be an acceptable loss to some ship operators. Fouling control coatings minimise biofilm drag by minimising biofilm load. Biofilm disruption by a sustained burst of speed (>> average operational speed) may provide operators with a means of fouling management. Flow conditions during biofilm formation affect growth, mechanical properties and resilience to mechanical disruption. Hydrodynamic stress can cause biofilm erosion and detachment, leading to lower profile, lower drag biofilms. Biomass loss patterns are likely related to various physico-mechanical properties of biofilms such as viscoelasticity, biofilm cohesion, adhesion to the surface, and roughness profiles. This project will relate the resilience of biofilm to disruption in shear and biofilm frictional drag to mechanical properties of biofilms. We will test how: 1. flow conditions during growth influence biomechanical properties and frictional drag of marine biofilm formed on different antifouling surfaces; 2. biofilm biophysical properties determine biofilm erosion in high flow; 3. biofilm frictional drag changes as biofilm structure, extent and biophysical parameters change. Our experimental approach addresses the disparity between the scales at which drag is measured (metre scale flow cell) and the scale at which physico-mechanical measurements are collected (micro to millimetre scale) by imaging hundreds of fields of view along the lengths of fouled drag test pieces. Optical coherence tomography images of biofilms will be collected with a fully automated micropositioning system. While a novel, co-registered air-jet indenter recently developed at Newcastle will be adopted for non-destructive determination of biofilm viscoelasticity at the exact positions where erosion is measured. The outcomes will be: 1) shortened timescale for screening the antifouling surfaces; and 2) pilot experimental data for validating in-house computational models of biofilm erosion in flow.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Newcastle University: - We have achieved the project objectives as planned. - We have validated the air-jet system and has successfully designed and manufactured the bespoken automated stage to accommodate both air-jet indenter and OCT. This new system has been successfully deployed to measure marine biofilms. - The air-jet was manufactured, and the test results were validated against hydrogels tested by another commercial mechanical testing rig (rheometer). The in-house designed bespoken automated stage has been manufactured and deployed for biofilm imaging and testing. The in-house designed software has been developed to couple air-jet, OCT and automated stage. The new coupled automated bioimaging and biomechanical testing system has been adopted to obtain biofilm microstructure and mechanics for marine biofilms. - We are applying IP protection for this unique automated imaging and test rigs for biofilms. The patent paperwork is in progress. - We are planning to write a paper on biofilm mechanics for a well regarded journal (Biotechnology and Bioengineering). We have secured another NBIC grant (3rd round POC) and have tried DARPA (outline proposal submitted, not funded). We just submitted an EPSRC IAA to exploit its wider industrial applications. - NBIC always responded the question promptly. We are very pleased with the NBIC POC process. The NBIC staff are remarkably supportive and helpful. We are extremely impressed with the tremendous support from NBIC in a timely manner when the COVID has significantly impacted the project (e.g. lab closure and researchers infected by COVID).
Start Year 2020
 
Description NBIC POC 02POC19126 Automated in-situ detection and monitoring of marine biofilm erosion and mechanical properties via custom optical coherence tomography (OCT) (Jinju Chen) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Ships are fouled by marine biofilms, resulting in increased frictional drag and fuel penalties. However, as not all biofilm drag is equally costly, "low drag" microfouling may be an acceptable loss to some ship operators. Fouling control coatings minimise biofilm drag by minimising biofilm load. Biofilm disruption by a sustained burst of speed (>> average operational speed) may provide operators with a means of fouling management. Flow conditions during biofilm formation affect growth, mechanical properties and resilience to mechanical disruption. Hydrodynamic stress can cause biofilm erosion and detachment, leading to lower profile, lower drag biofilms. Biomass loss patterns are likely related to various physico-mechanical properties of biofilms such as viscoelasticity, biofilm cohesion, adhesion to the surface, and roughness profiles. This project will relate the resilience of biofilm to disruption in shear and biofilm frictional drag to mechanical properties of biofilms. We will test how: 1. flow conditions during growth influence biomechanical properties and frictional drag of marine biofilm formed on different antifouling surfaces; 2. biofilm biophysical properties determine biofilm erosion in high flow; 3. biofilm frictional drag changes as biofilm structure, extent and biophysical parameters change. Our experimental approach addresses the disparity between the scales at which drag is measured (metre scale flow cell) and the scale at which physico-mechanical measurements are collected (micro to millimetre scale) by imaging hundreds of fields of view along the lengths of fouled drag test pieces. Optical coherence tomography images of biofilms will be collected with a fully automated micropositioning system. While a novel, co-registered air-jet indenter recently developed at Newcastle will be adopted for non-destructive determination of biofilm viscoelasticity at the exact positions where erosion is measured. The outcomes will be: 1) shortened timescale for screening the antifouling surfaces; and 2) pilot experimental data for validating in-house computational models of biofilm erosion in flow.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Newcastle University: - We have achieved the project objectives as planned. - We have validated the air-jet system and has successfully designed and manufactured the bespoken automated stage to accommodate both air-jet indenter and OCT. This new system has been successfully deployed to measure marine biofilms. - The air-jet was manufactured, and the test results were validated against hydrogels tested by another commercial mechanical testing rig (rheometer). The in-house designed bespoken automated stage has been manufactured and deployed for biofilm imaging and testing. The in-house designed software has been developed to couple air-jet, OCT and automated stage. The new coupled automated bioimaging and biomechanical testing system has been adopted to obtain biofilm microstructure and mechanics for marine biofilms. - We are applying IP protection for this unique automated imaging and test rigs for biofilms. The patent paperwork is in progress. - We are planning to write a paper on biofilm mechanics for a well regarded journal (Biotechnology and Bioengineering). We have secured another NBIC grant (3rd round POC) and have tried DARPA (outline proposal submitted, not funded). We just submitted an EPSRC IAA to exploit its wider industrial applications. - NBIC always responded the question promptly. We are very pleased with the NBIC POC process. The NBIC staff are remarkably supportive and helpful. We are extremely impressed with the tremendous support from NBIC in a timely manner when the COVID has significantly impacted the project (e.g. lab closure and researchers infected by COVID).
Start Year 2020
 
Description NBIC POC 02POC19128 Validation of the Oxi-Cell Ozone System for the Elimination of Biofilms (Jeremy Webb) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Oxi-Tech have developed the in-line ozone production system Oxi-Cell for water treatment. Oxi-Cell provides an in situ electrolytic process generating dissolved ozone in cold water from the electrolysis of the water. Ozone is recognised as a powerful yet environmentally clean disinfectant. This project will determine the effectiveness of Oxi-Cell in combatting bacterial growth by 2 key indicator organisms relevant to Oxi-Tech's target. We will investigate the effectiveness of the Oxi-Cell ozone device against planktonic and biofilm cultures within model systems designed to be representative of the working conditions expected within the target market settings. The efficacy of Oxi-Cell technologies will be assessed through confocal microscopic examination of the biofilm and colony forming unit enumeration following treatment with ozone. Oxi-Tech will use this information to validate the antimicrobial efficacy of their product which will assist market entry by Oxi-Cell. In brief we will develop model systems to expose both planktonic and biofilm cultures to 1.5 mg/L ozone. The biofilms will be grown on coupons representative of the materials found within water systems. Biofilm formation will be assessed through confocal microscopy with Live/Dead staining. All research will be carried out within a class 2 laboratory in adherence with appropriate risk assessments and disinfection procedures. Ozone gas exposure is a low risk within this project. The risk of exposure to ozone gas is mitigated through the following steps: - Ozone generation will only take place within the liquid filled portions of the Oxi-Cell ensuring that the ozone is dissolved within fluids. - All air vents from the system will be fitted with an activated carbon filter to reduce exposure to any ozone which comes out of solution. - The class 2 laboratory in which the experiments will take place equipped with an efficient air handling system which would significantly reduce any potential exposure. - The model system will be fitted with an ozone sensor which will alarm should ozone levels rise to an unsafe level. The laboratory would then be evacuated. - All ozone treated fluids will be left for 30 minutes following treatment before handling. This will allow time for all ozone to revert to molecular oxygen.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19128 Validation of the Oxi-Cell Ozone System for the Elimination of Biofilms (Jeremy Webb) 
Organisation Oxi-Tech Solutions Ltd
Country United Kingdom 
Sector Private 
PI Contribution Oxi-Tech have developed the in-line ozone production system Oxi-Cell for water treatment. Oxi-Cell provides an in situ electrolytic process generating dissolved ozone in cold water from the electrolysis of the water. Ozone is recognised as a powerful yet environmentally clean disinfectant. This project will determine the effectiveness of Oxi-Cell in combatting bacterial growth by 2 key indicator organisms relevant to Oxi-Tech's target. We will investigate the effectiveness of the Oxi-Cell ozone device against planktonic and biofilm cultures within model systems designed to be representative of the working conditions expected within the target market settings. The efficacy of Oxi-Cell technologies will be assessed through confocal microscopic examination of the biofilm and colony forming unit enumeration following treatment with ozone. Oxi-Tech will use this information to validate the antimicrobial efficacy of their product which will assist market entry by Oxi-Cell. In brief we will develop model systems to expose both planktonic and biofilm cultures to 1.5 mg/L ozone. The biofilms will be grown on coupons representative of the materials found within water systems. Biofilm formation will be assessed through confocal microscopy with Live/Dead staining. All research will be carried out within a class 2 laboratory in adherence with appropriate risk assessments and disinfection procedures. Ozone gas exposure is a low risk within this project. The risk of exposure to ozone gas is mitigated through the following steps: - Ozone generation will only take place within the liquid filled portions of the Oxi-Cell ensuring that the ozone is dissolved within fluids. - All air vents from the system will be fitted with an activated carbon filter to reduce exposure to any ozone which comes out of solution. - The class 2 laboratory in which the experiments will take place equipped with an efficient air handling system which would significantly reduce any potential exposure. - The model system will be fitted with an ozone sensor which will alarm should ozone levels rise to an unsafe level. The laboratory would then be evacuated. - All ozone treated fluids will be left for 30 minutes following treatment before handling. This will allow time for all ozone to revert to molecular oxygen.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19128 Validation of the Oxi-Cell Ozone System for the Elimination of Biofilms (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Oxi-Tech have developed the in-line ozone production system Oxi-Cell for water treatment. Oxi-Cell provides an in situ electrolytic process generating dissolved ozone in cold water from the electrolysis of the water. Ozone is recognised as a powerful yet environmentally clean disinfectant. This project will determine the effectiveness of Oxi-Cell in combatting bacterial growth by 2 key indicator organisms relevant to Oxi-Tech's target. We will investigate the effectiveness of the Oxi-Cell ozone device against planktonic and biofilm cultures within model systems designed to be representative of the working conditions expected within the target market settings. The efficacy of Oxi-Cell technologies will be assessed through confocal microscopic examination of the biofilm and colony forming unit enumeration following treatment with ozone. Oxi-Tech will use this information to validate the antimicrobial efficacy of their product which will assist market entry by Oxi-Cell. In brief we will develop model systems to expose both planktonic and biofilm cultures to 1.5 mg/L ozone. The biofilms will be grown on coupons representative of the materials found within water systems. Biofilm formation will be assessed through confocal microscopy with Live/Dead staining. All research will be carried out within a class 2 laboratory in adherence with appropriate risk assessments and disinfection procedures. Ozone gas exposure is a low risk within this project. The risk of exposure to ozone gas is mitigated through the following steps: - Ozone generation will only take place within the liquid filled portions of the Oxi-Cell ensuring that the ozone is dissolved within fluids. - All air vents from the system will be fitted with an activated carbon filter to reduce exposure to any ozone which comes out of solution. - The class 2 laboratory in which the experiments will take place equipped with an efficient air handling system which would significantly reduce any potential exposure. - The model system will be fitted with an ozone sensor which will alarm should ozone levels rise to an unsafe level. The laboratory would then be evacuated. - All ozone treated fluids will be left for 30 minutes following treatment before handling. This will allow time for all ozone to revert to molecular oxygen.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2019
 
Description NBIC POC 02POC19129 Plasma for the prevention and management of chronic wound biofilms (Matthew Hardman) 
Organisation Fourth State Medicine Ltd
Country United Kingdom 
Sector Private 
PI Contribution The overall aim of this project is to directly evaluate the safety, efficacy and performance characteristics of an innovative new treatment for the management and prevention of biofilms in human chronic wounds. The market opportunity: There is an urgent need for new treatments that are able to disrupt existing biofilms and prevent wound biofilm formation without promoting antimicrobial resistance. Current approaches: Current state-of-the-art chronic wound treatments, such a cell-based therapies, are almost exclusively focused on wound cell activation and closure. Yet, wounds regularly persist unhealed for many years, often with recurrent and recalcitrant infections. Evidence now shows that bacterial biofilms play a major role in delayed healing and antibiotic treatment failure. Indeed, the rate of antibiotic therapy is reportedly 10 times higher in chronic wound patients. There is a clear healthcare need to develop and bring to market effective non-antimicrobial strategies for the management of biofilms in chronic wounds. This will reduce antibiotic resistance and lead to faster healing with reduced wound reoccurrence. Fourth State Medicine Ltd Innovation: This proposal represents a totally disruptive approach to biofilm management, repurposing an existing technology from the cosmetic to wound care market. Fourth State Medicine Ltd's highly innovative solution to biofilm management is built around their patented plasma engine capable of targeted application of both hot and cold plasma. Our study in brief: In the context of wound management, we will test an entirely new sequential plasma delivery approach. Powerful hot plasma will first locally disrupt established wound biofilm, while minimally invasive cold plasma will ensure subsequent prevention of biofilm re-formation. This approach is tailored to fit within current clinical practice, maximising applicability and generalisability. Evaluating success: We will evaluate success using carefully designed work-package-linked project deliverables. We will use clinically relevant models with defined readout parameters to address efficacy, safety and reproducibility. Fourth State Medicine Ltd (4SM) have developed an innovative platform technology, used to power their CE-marked hot/cold plasma Nebulaskin cosmetic device (Fig 1). Our pilot data demonstrates clear efficacy of cold plasma against non-biofilm bacteria (Fig 2) and the ability of cold plasma to prevent the formation of biofilm (Fig 3). This POC project will significantly extend this work, for the first time, applying both hot and cold plasma to established wound-associated bacterial biofilms (Fig 4), evaluating efficacy, selectivity and safety.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Hull: - This NIBC funded POC project addressed a major area of unmet need, development of chronic wound biofilms. It brought together Fourth state Medicine, an SME who have developed to device for the controlled delivery of atmospheric plasma, and the University of Hull, who have extensive wound biology/microbiology expertise. The project demonstrated that remotely delivered cold atmospheric plasma (CAP) delivers substantial anti-microbial efficacy against nosocomial wound pathogens. Moreover, remotely delivered CAP prevents biofilm formation across a range of wound bacteria. Crucially, the plasma technology is compatible with gas delivery and NPWT dressings currently in clinical use and offers therapeutic delivery modalities that can be easily integrated into the current patient pathway. There were some challenges posted by Coivd-19 but alternative studies were implemented that add values to further translation of this technology. - Our results clearly demonstrate that short-term remotely delivered CAP is able to prevent the formation of wound relevant biofilms. This mode of delivery is perfectly suited to a wearable, easy to apply wound dressing technology, and has considerable promise for future development. - This project has now been successful in obtaining follow on industry funding (from a leading wound care company) to further explore implementation of this technology. - Feedback to NBIC: We have found the POC process to be well managed, rewarding and have significantly benefited from being involved. NBIC is doing a fantastic job of bringing the biofilm community together. This POC project and other NBIC interactions and collaborations have grown our collaborator network and added significant value to ongoing project. Dr Katerina Steventon has been particularly important in realising these benefits. Feedback from Fourth State Medicine: - We have secured follow on funding from Innovate UK to a tune of £79897. The in kind contribution from Fourth State Medicine is £21,000. Project title: Development and application of a new technology for the targeted management of biofilms in human chronic wounds.
Start Year 2019
 
Description NBIC POC 02POC19129 Plasma for the prevention and management of chronic wound biofilms (Matthew Hardman) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall aim of this project is to directly evaluate the safety, efficacy and performance characteristics of an innovative new treatment for the management and prevention of biofilms in human chronic wounds. The market opportunity: There is an urgent need for new treatments that are able to disrupt existing biofilms and prevent wound biofilm formation without promoting antimicrobial resistance. Current approaches: Current state-of-the-art chronic wound treatments, such a cell-based therapies, are almost exclusively focused on wound cell activation and closure. Yet, wounds regularly persist unhealed for many years, often with recurrent and recalcitrant infections. Evidence now shows that bacterial biofilms play a major role in delayed healing and antibiotic treatment failure. Indeed, the rate of antibiotic therapy is reportedly 10 times higher in chronic wound patients. There is a clear healthcare need to develop and bring to market effective non-antimicrobial strategies for the management of biofilms in chronic wounds. This will reduce antibiotic resistance and lead to faster healing with reduced wound reoccurrence. Fourth State Medicine Ltd Innovation: This proposal represents a totally disruptive approach to biofilm management, repurposing an existing technology from the cosmetic to wound care market. Fourth State Medicine Ltd's highly innovative solution to biofilm management is built around their patented plasma engine capable of targeted application of both hot and cold plasma. Our study in brief: In the context of wound management, we will test an entirely new sequential plasma delivery approach. Powerful hot plasma will first locally disrupt established wound biofilm, while minimally invasive cold plasma will ensure subsequent prevention of biofilm re-formation. This approach is tailored to fit within current clinical practice, maximising applicability and generalisability. Evaluating success: We will evaluate success using carefully designed work-package-linked project deliverables. We will use clinically relevant models with defined readout parameters to address efficacy, safety and reproducibility. Fourth State Medicine Ltd (4SM) have developed an innovative platform technology, used to power their CE-marked hot/cold plasma Nebulaskin cosmetic device (Fig 1). Our pilot data demonstrates clear efficacy of cold plasma against non-biofilm bacteria (Fig 2) and the ability of cold plasma to prevent the formation of biofilm (Fig 3). This POC project will significantly extend this work, for the first time, applying both hot and cold plasma to established wound-associated bacterial biofilms (Fig 4), evaluating efficacy, selectivity and safety.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Hull: - This NIBC funded POC project addressed a major area of unmet need, development of chronic wound biofilms. It brought together Fourth state Medicine, an SME who have developed to device for the controlled delivery of atmospheric plasma, and the University of Hull, who have extensive wound biology/microbiology expertise. The project demonstrated that remotely delivered cold atmospheric plasma (CAP) delivers substantial anti-microbial efficacy against nosocomial wound pathogens. Moreover, remotely delivered CAP prevents biofilm formation across a range of wound bacteria. Crucially, the plasma technology is compatible with gas delivery and NPWT dressings currently in clinical use and offers therapeutic delivery modalities that can be easily integrated into the current patient pathway. There were some challenges posted by Coivd-19 but alternative studies were implemented that add values to further translation of this technology. - Our results clearly demonstrate that short-term remotely delivered CAP is able to prevent the formation of wound relevant biofilms. This mode of delivery is perfectly suited to a wearable, easy to apply wound dressing technology, and has considerable promise for future development. - This project has now been successful in obtaining follow on industry funding (from a leading wound care company) to further explore implementation of this technology. - Feedback to NBIC: We have found the POC process to be well managed, rewarding and have significantly benefited from being involved. NBIC is doing a fantastic job of bringing the biofilm community together. This POC project and other NBIC interactions and collaborations have grown our collaborator network and added significant value to ongoing project. Dr Katerina Steventon has been particularly important in realising these benefits. Feedback from Fourth State Medicine: - We have secured follow on funding from Innovate UK to a tune of £79897. The in kind contribution from Fourth State Medicine is £21,000. Project title: Development and application of a new technology for the targeted management of biofilms in human chronic wounds.
Start Year 2019
 
Description NBIC POC 02POC19129 Plasma for the prevention and management of chronic wound biofilms (Matthew Hardman) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall aim of this project is to directly evaluate the safety, efficacy and performance characteristics of an innovative new treatment for the management and prevention of biofilms in human chronic wounds. The market opportunity: There is an urgent need for new treatments that are able to disrupt existing biofilms and prevent wound biofilm formation without promoting antimicrobial resistance. Current approaches: Current state-of-the-art chronic wound treatments, such a cell-based therapies, are almost exclusively focused on wound cell activation and closure. Yet, wounds regularly persist unhealed for many years, often with recurrent and recalcitrant infections. Evidence now shows that bacterial biofilms play a major role in delayed healing and antibiotic treatment failure. Indeed, the rate of antibiotic therapy is reportedly 10 times higher in chronic wound patients. There is a clear healthcare need to develop and bring to market effective non-antimicrobial strategies for the management of biofilms in chronic wounds. This will reduce antibiotic resistance and lead to faster healing with reduced wound reoccurrence. Fourth State Medicine Ltd Innovation: This proposal represents a totally disruptive approach to biofilm management, repurposing an existing technology from the cosmetic to wound care market. Fourth State Medicine Ltd's highly innovative solution to biofilm management is built around their patented plasma engine capable of targeted application of both hot and cold plasma. Our study in brief: In the context of wound management, we will test an entirely new sequential plasma delivery approach. Powerful hot plasma will first locally disrupt established wound biofilm, while minimally invasive cold plasma will ensure subsequent prevention of biofilm re-formation. This approach is tailored to fit within current clinical practice, maximising applicability and generalisability. Evaluating success: We will evaluate success using carefully designed work-package-linked project deliverables. We will use clinically relevant models with defined readout parameters to address efficacy, safety and reproducibility. Fourth State Medicine Ltd (4SM) have developed an innovative platform technology, used to power their CE-marked hot/cold plasma Nebulaskin cosmetic device (Fig 1). Our pilot data demonstrates clear efficacy of cold plasma against non-biofilm bacteria (Fig 2) and the ability of cold plasma to prevent the formation of biofilm (Fig 3). This POC project will significantly extend this work, for the first time, applying both hot and cold plasma to established wound-associated bacterial biofilms (Fig 4), evaluating efficacy, selectivity and safety.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Hull: - This NIBC funded POC project addressed a major area of unmet need, development of chronic wound biofilms. It brought together Fourth state Medicine, an SME who have developed to device for the controlled delivery of atmospheric plasma, and the University of Hull, who have extensive wound biology/microbiology expertise. The project demonstrated that remotely delivered cold atmospheric plasma (CAP) delivers substantial anti-microbial efficacy against nosocomial wound pathogens. Moreover, remotely delivered CAP prevents biofilm formation across a range of wound bacteria. Crucially, the plasma technology is compatible with gas delivery and NPWT dressings currently in clinical use and offers therapeutic delivery modalities that can be easily integrated into the current patient pathway. There were some challenges posted by Coivd-19 but alternative studies were implemented that add values to further translation of this technology. - Our results clearly demonstrate that short-term remotely delivered CAP is able to prevent the formation of wound relevant biofilms. This mode of delivery is perfectly suited to a wearable, easy to apply wound dressing technology, and has considerable promise for future development. - This project has now been successful in obtaining follow on industry funding (from a leading wound care company) to further explore implementation of this technology. - Feedback to NBIC: We have found the POC process to be well managed, rewarding and have significantly benefited from being involved. NBIC is doing a fantastic job of bringing the biofilm community together. This POC project and other NBIC interactions and collaborations have grown our collaborator network and added significant value to ongoing project. Dr Katerina Steventon has been particularly important in realising these benefits. Feedback from Fourth State Medicine: - We have secured follow on funding from Innovate UK to a tune of £79897. The in kind contribution from Fourth State Medicine is £21,000. Project title: Development and application of a new technology for the targeted management of biofilms in human chronic wounds.
Start Year 2019
 
Description NBIC POC 02POC19131 Development of a non-thermal plasma applicator for the decontamination of medical endoscopes (Robin Thorn) 
Organisation Creo Medical Ltd
Country United Kingdom 
Sector Private 
PI Contribution This proof-of-principle study aims to develop non-thermal plasma (NTP) as a novel technological approach for the decontamination of endoscope operating channels, as part of existing re-processing procedures within hospital facilities. This project will build upon existing collaborative research undertaken by UWE Bristol and Creo Medical that demonstrated basic in vitro antimicrobial efficacy of a NTP generator system against planktonic bacteria (see attached figure). The main project objective is to develop and optimise a bespoke nonthermal plasma applicator for effective decontamination of medically relevant microbial biofilms grown within endoscope operating channels. NTPs are partially ionised gases that contain highly reactive particles, including: electronically excited atoms, molecules, ionic and free radical species, and has potential applications for sterilisation and disinfection within biological and medical fields. It has multiple advantages in the decontamination/ sterilisation of hard surfaces as it is non-wetting, does not contain potentially harmful biocides, and it leaves no chemical residue. Recent technological breakthroughs have resulted in the ability to produce low temperature plasmas under atmospheric conditions, which has enabled Creo Medical to develop NTP technology with a range of potential biomedical applications. The success of this project will be measured by development of a novel NTP applicator specifically designed for treatment of endoscope operating channels and concomitant antimicrobial data showing the capability of this system in reducing biofilm bioburden within a laboratory model. This will give confidence and results to enable future industrial capital investment, and support bids to UK research councils to move the research towards practical exploitation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of the West of England: - Overall, the results of this proof-of-concept study have demonstrated that the Creo Medical Ltd. developed non-thermal plasma applicator is capable of significant decontamination of surrogate endoscope operating channels contaminated with bacterial biofilms. Further collaborative optimisation and testing is now required to produce a fully functioning clinical prototype device for integration into endoscope reprocessing work flows. - The project has resulted in the generation of data sets related to the development of the non-thermal plasma device for the decontamination of medical endoscopes. UWE Bristol and Creo Medical will co-own the Intellectual Property Rights in these results together with any derivatives thereof, and may take such steps as it may decide from time to time, at its expense, to register and maintain any protection for the Intellectual Property Rights in the results, including filing and maintaining patent applications. No current patents based on the project outcomes are pending. - Due to the success of this project, a number of key next steps have already been identified and work towards them has already been undertaken to exploit the successful project outcomes. A grant application to Innovate UK Smart Grants was initially developed to exploit the scientific technological outcomes from this NBIC project. However, due to the positive outcomes of this study and the desire of Creo Medical Ltd. for rapid research and development to enable technological implementation and commercialisation, they have now committed to direct funding a collaborative project between UWE Bristol and Creo Medical. This project will start on 1st February 2021 (subject to contracts). - Feedback to NBIC: The NBIC POC process has enabled key business engagement and collaboration between UWE Bristol and Creo Medical that would not have been otherwise possible. In addition, the consortium would like to thank NBIC for providing extension funds that enabled successful completion of this grant within the context of the global pandemic.
Start Year 2019
 
Description NBIC POC 02POC19131 Development of a non-thermal plasma applicator for the decontamination of medical endoscopes (Robin Thorn) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This proof-of-principle study aims to develop non-thermal plasma (NTP) as a novel technological approach for the decontamination of endoscope operating channels, as part of existing re-processing procedures within hospital facilities. This project will build upon existing collaborative research undertaken by UWE Bristol and Creo Medical that demonstrated basic in vitro antimicrobial efficacy of a NTP generator system against planktonic bacteria (see attached figure). The main project objective is to develop and optimise a bespoke nonthermal plasma applicator for effective decontamination of medically relevant microbial biofilms grown within endoscope operating channels. NTPs are partially ionised gases that contain highly reactive particles, including: electronically excited atoms, molecules, ionic and free radical species, and has potential applications for sterilisation and disinfection within biological and medical fields. It has multiple advantages in the decontamination/ sterilisation of hard surfaces as it is non-wetting, does not contain potentially harmful biocides, and it leaves no chemical residue. Recent technological breakthroughs have resulted in the ability to produce low temperature plasmas under atmospheric conditions, which has enabled Creo Medical to develop NTP technology with a range of potential biomedical applications. The success of this project will be measured by development of a novel NTP applicator specifically designed for treatment of endoscope operating channels and concomitant antimicrobial data showing the capability of this system in reducing biofilm bioburden within a laboratory model. This will give confidence and results to enable future industrial capital investment, and support bids to UK research councils to move the research towards practical exploitation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of the West of England: - Overall, the results of this proof-of-concept study have demonstrated that the Creo Medical Ltd. developed non-thermal plasma applicator is capable of significant decontamination of surrogate endoscope operating channels contaminated with bacterial biofilms. Further collaborative optimisation and testing is now required to produce a fully functioning clinical prototype device for integration into endoscope reprocessing work flows. - The project has resulted in the generation of data sets related to the development of the non-thermal plasma device for the decontamination of medical endoscopes. UWE Bristol and Creo Medical will co-own the Intellectual Property Rights in these results together with any derivatives thereof, and may take such steps as it may decide from time to time, at its expense, to register and maintain any protection for the Intellectual Property Rights in the results, including filing and maintaining patent applications. No current patents based on the project outcomes are pending. - Due to the success of this project, a number of key next steps have already been identified and work towards them has already been undertaken to exploit the successful project outcomes. A grant application to Innovate UK Smart Grants was initially developed to exploit the scientific technological outcomes from this NBIC project. However, due to the positive outcomes of this study and the desire of Creo Medical Ltd. for rapid research and development to enable technological implementation and commercialisation, they have now committed to direct funding a collaborative project between UWE Bristol and Creo Medical. This project will start on 1st February 2021 (subject to contracts). - Feedback to NBIC: The NBIC POC process has enabled key business engagement and collaboration between UWE Bristol and Creo Medical that would not have been otherwise possible. In addition, the consortium would like to thank NBIC for providing extension funds that enabled successful completion of this grant within the context of the global pandemic.
Start Year 2019
 
Description NBIC POC 02POC19131 Development of a non-thermal plasma applicator for the decontamination of medical endoscopes (Robin Thorn) 
Organisation PENTAX Medical Company
Country United States 
Sector Private 
PI Contribution This proof-of-principle study aims to develop non-thermal plasma (NTP) as a novel technological approach for the decontamination of endoscope operating channels, as part of existing re-processing procedures within hospital facilities. This project will build upon existing collaborative research undertaken by UWE Bristol and Creo Medical that demonstrated basic in vitro antimicrobial efficacy of a NTP generator system against planktonic bacteria (see attached figure). The main project objective is to develop and optimise a bespoke nonthermal plasma applicator for effective decontamination of medically relevant microbial biofilms grown within endoscope operating channels. NTPs are partially ionised gases that contain highly reactive particles, including: electronically excited atoms, molecules, ionic and free radical species, and has potential applications for sterilisation and disinfection within biological and medical fields. It has multiple advantages in the decontamination/ sterilisation of hard surfaces as it is non-wetting, does not contain potentially harmful biocides, and it leaves no chemical residue. Recent technological breakthroughs have resulted in the ability to produce low temperature plasmas under atmospheric conditions, which has enabled Creo Medical to develop NTP technology with a range of potential biomedical applications. The success of this project will be measured by development of a novel NTP applicator specifically designed for treatment of endoscope operating channels and concomitant antimicrobial data showing the capability of this system in reducing biofilm bioburden within a laboratory model. This will give confidence and results to enable future industrial capital investment, and support bids to UK research councils to move the research towards practical exploitation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of the West of England: - Overall, the results of this proof-of-concept study have demonstrated that the Creo Medical Ltd. developed non-thermal plasma applicator is capable of significant decontamination of surrogate endoscope operating channels contaminated with bacterial biofilms. Further collaborative optimisation and testing is now required to produce a fully functioning clinical prototype device for integration into endoscope reprocessing work flows. - The project has resulted in the generation of data sets related to the development of the non-thermal plasma device for the decontamination of medical endoscopes. UWE Bristol and Creo Medical will co-own the Intellectual Property Rights in these results together with any derivatives thereof, and may take such steps as it may decide from time to time, at its expense, to register and maintain any protection for the Intellectual Property Rights in the results, including filing and maintaining patent applications. No current patents based on the project outcomes are pending. - Due to the success of this project, a number of key next steps have already been identified and work towards them has already been undertaken to exploit the successful project outcomes. A grant application to Innovate UK Smart Grants was initially developed to exploit the scientific technological outcomes from this NBIC project. However, due to the positive outcomes of this study and the desire of Creo Medical Ltd. for rapid research and development to enable technological implementation and commercialisation, they have now committed to direct funding a collaborative project between UWE Bristol and Creo Medical. This project will start on 1st February 2021 (subject to contracts). - Feedback to NBIC: The NBIC POC process has enabled key business engagement and collaboration between UWE Bristol and Creo Medical that would not have been otherwise possible. In addition, the consortium would like to thank NBIC for providing extension funds that enabled successful completion of this grant within the context of the global pandemic.
Start Year 2019
 
Description NBIC POC 02POC19131 Development of a non-thermal plasma applicator for the decontamination of medical endoscopes (Robin Thorn) 
Organisation University of the West of England
Country United Kingdom 
Sector Academic/University 
PI Contribution This proof-of-principle study aims to develop non-thermal plasma (NTP) as a novel technological approach for the decontamination of endoscope operating channels, as part of existing re-processing procedures within hospital facilities. This project will build upon existing collaborative research undertaken by UWE Bristol and Creo Medical that demonstrated basic in vitro antimicrobial efficacy of a NTP generator system against planktonic bacteria (see attached figure). The main project objective is to develop and optimise a bespoke nonthermal plasma applicator for effective decontamination of medically relevant microbial biofilms grown within endoscope operating channels. NTPs are partially ionised gases that contain highly reactive particles, including: electronically excited atoms, molecules, ionic and free radical species, and has potential applications for sterilisation and disinfection within biological and medical fields. It has multiple advantages in the decontamination/ sterilisation of hard surfaces as it is non-wetting, does not contain potentially harmful biocides, and it leaves no chemical residue. Recent technological breakthroughs have resulted in the ability to produce low temperature plasmas under atmospheric conditions, which has enabled Creo Medical to develop NTP technology with a range of potential biomedical applications. The success of this project will be measured by development of a novel NTP applicator specifically designed for treatment of endoscope operating channels and concomitant antimicrobial data showing the capability of this system in reducing biofilm bioburden within a laboratory model. This will give confidence and results to enable future industrial capital investment, and support bids to UK research councils to move the research towards practical exploitation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of the West of England: - Overall, the results of this proof-of-concept study have demonstrated that the Creo Medical Ltd. developed non-thermal plasma applicator is capable of significant decontamination of surrogate endoscope operating channels contaminated with bacterial biofilms. Further collaborative optimisation and testing is now required to produce a fully functioning clinical prototype device for integration into endoscope reprocessing work flows. - The project has resulted in the generation of data sets related to the development of the non-thermal plasma device for the decontamination of medical endoscopes. UWE Bristol and Creo Medical will co-own the Intellectual Property Rights in these results together with any derivatives thereof, and may take such steps as it may decide from time to time, at its expense, to register and maintain any protection for the Intellectual Property Rights in the results, including filing and maintaining patent applications. No current patents based on the project outcomes are pending. - Due to the success of this project, a number of key next steps have already been identified and work towards them has already been undertaken to exploit the successful project outcomes. A grant application to Innovate UK Smart Grants was initially developed to exploit the scientific technological outcomes from this NBIC project. However, due to the positive outcomes of this study and the desire of Creo Medical Ltd. for rapid research and development to enable technological implementation and commercialisation, they have now committed to direct funding a collaborative project between UWE Bristol and Creo Medical. This project will start on 1st February 2021 (subject to contracts). - Feedback to NBIC: The NBIC POC process has enabled key business engagement and collaboration between UWE Bristol and Creo Medical that would not have been otherwise possible. In addition, the consortium would like to thank NBIC for providing extension funds that enabled successful completion of this grant within the context of the global pandemic.
Start Year 2019
 
Description NBIC POC 02POC19134 Standardised complex wound biofilm models - a robust antimicrobial screening tool (Gordon Ramage) 
Organisation BluTest Laboratories Limited
Country United Kingdom 
Sector Private 
PI Contribution This project will evaluate the feasibility of a rapid and reproducible commercial assay for testing and screening of active agents against complex multi-species wound biofilms. We aim to develop a high throughput biofilm assay platform capable of testing the anti-biofilm efficacy of bioactive compounds, while simultaneously assessing the impact on inflammatory biomarkers. The concept of the study is to provide a simple and robust platform for a complex problem, using easily quantifiable parameters that enables laboratory personnel within an industrial setting to readily undertake biofilm testing and inflammatory biomarker assessment. Complex wound biofilm models, informed from real patient microbiome analysis at the University of Glasgow (UoG), will be integrated into mammalian cell coculture systems. The USP for this model is our ability to enhance claims support for anti-biofilm molecules, both in terms of a microbial effect and how this alters inflammation. These models will be developed, tested and validated at the University of Glasgow (UoG) prior to technology transfer to BluTest Laboratories (BTL). These model systems will be implemented through training SOPs and onsite training prior to embedding into the established quality assurances systems. This models will then be made commercially available, working with partners such as Smith & Nephew (see letter of support). Success will be measured two-fold, technology transfer of robust high throughout complex wound biofilm model, and future revenues generated by commercial success at BTL. This project fits with the overall mission of NBIC, where we have established a network of research and innovation capacity by forging a close collaboration between industry and academia.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Glasgow: - Overall, the project followed the original plan with only small deviations from those stated in the work plans. - A clinically relevant multi-species biofilm model was developed containing a total of 10- bacterial and 1 fungal species. Previous microbiome analyses by the research group were used to guide the development of the complex polymicrobial wound biofilm model (Smith et al., 2016; Townsend., 2017), which ultimately contained 11- microbial species (10 bacteria and 1 fungal species). - The complex biofilm model was utilised effectively to assess the efficacy of three conventional anti-biofilm washes (CHX, PVP and H2O2). Development of a complex 3D-co-culture system to used to identify potential biomarkers (at a gene and protein level) which could dictate effectiveness of novel treatments moving forward. - Appropriate in-house training was provided for a member of BLT, to grow and treat the biofilms, as well as to handle and process the tissue model. Defined SOPs for all methods were also produced and provided to BLT as part of the technology transfer. - All three conventional anti-biofilm wound washes were effective in reducing the viability of the complex polymicrobial biofilm. However, unique transcriptional and proteomic responses were observed when assessing the response of a 3D skin epidermis model to treated and untreated biofilms. This study has succeeded in identifying possible genes or proteins that could be used as possible biomarkers of inflammation in future anti-biofilm treatment studies. - Considering progressing a patent application. The model composition, SOPs how to construct this and quantitative and qualitative measures have now been transferred to BluTest Laboratories and this is part of their Biofilm Assay Portfolio. - The results of the current study are being compiled into a manuscript for publication. We hope to submit the paper to a high impact biofilm-related journal.. - We used the basis of the model to support a grant application to EPSRC to the value of £369,080 to Glasgow and £1.7M in total: • https://gow.epsrc.ukri.org/NGBOViewGrant.aspx?GrantRef=EP/V005839/1 • https://www.lancaster.ac.uk/materials-science-institute/news/17m-project-to-explore-groundbreaking-new-treatment-for-biofilm-infections-in-foot-ulcers-1 This model's application will help us drive further exploration in this space. - Blutest have appointed one of Gordon's PhD students as a biofilm specialist and Gordon has supported a PostDoc role. Published paper: 10.1038/s41522-022-00286-z
Start Year 2020
 
Description NBIC POC 02POC19134 Standardised complex wound biofilm models - a robust antimicrobial screening tool (Gordon Ramage) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This project will evaluate the feasibility of a rapid and reproducible commercial assay for testing and screening of active agents against complex multi-species wound biofilms. We aim to develop a high throughput biofilm assay platform capable of testing the anti-biofilm efficacy of bioactive compounds, while simultaneously assessing the impact on inflammatory biomarkers. The concept of the study is to provide a simple and robust platform for a complex problem, using easily quantifiable parameters that enables laboratory personnel within an industrial setting to readily undertake biofilm testing and inflammatory biomarker assessment. Complex wound biofilm models, informed from real patient microbiome analysis at the University of Glasgow (UoG), will be integrated into mammalian cell coculture systems. The USP for this model is our ability to enhance claims support for anti-biofilm molecules, both in terms of a microbial effect and how this alters inflammation. These models will be developed, tested and validated at the University of Glasgow (UoG) prior to technology transfer to BluTest Laboratories (BTL). These model systems will be implemented through training SOPs and onsite training prior to embedding into the established quality assurances systems. This models will then be made commercially available, working with partners such as Smith & Nephew (see letter of support). Success will be measured two-fold, technology transfer of robust high throughout complex wound biofilm model, and future revenues generated by commercial success at BTL. This project fits with the overall mission of NBIC, where we have established a network of research and innovation capacity by forging a close collaboration between industry and academia.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Glasgow: - Overall, the project followed the original plan with only small deviations from those stated in the work plans. - A clinically relevant multi-species biofilm model was developed containing a total of 10- bacterial and 1 fungal species. Previous microbiome analyses by the research group were used to guide the development of the complex polymicrobial wound biofilm model (Smith et al., 2016; Townsend., 2017), which ultimately contained 11- microbial species (10 bacteria and 1 fungal species). - The complex biofilm model was utilised effectively to assess the efficacy of three conventional anti-biofilm washes (CHX, PVP and H2O2). Development of a complex 3D-co-culture system to used to identify potential biomarkers (at a gene and protein level) which could dictate effectiveness of novel treatments moving forward. - Appropriate in-house training was provided for a member of BLT, to grow and treat the biofilms, as well as to handle and process the tissue model. Defined SOPs for all methods were also produced and provided to BLT as part of the technology transfer. - All three conventional anti-biofilm wound washes were effective in reducing the viability of the complex polymicrobial biofilm. However, unique transcriptional and proteomic responses were observed when assessing the response of a 3D skin epidermis model to treated and untreated biofilms. This study has succeeded in identifying possible genes or proteins that could be used as possible biomarkers of inflammation in future anti-biofilm treatment studies. - Considering progressing a patent application. The model composition, SOPs how to construct this and quantitative and qualitative measures have now been transferred to BluTest Laboratories and this is part of their Biofilm Assay Portfolio. - The results of the current study are being compiled into a manuscript for publication. We hope to submit the paper to a high impact biofilm-related journal.. - We used the basis of the model to support a grant application to EPSRC to the value of £369,080 to Glasgow and £1.7M in total: • https://gow.epsrc.ukri.org/NGBOViewGrant.aspx?GrantRef=EP/V005839/1 • https://www.lancaster.ac.uk/materials-science-institute/news/17m-project-to-explore-groundbreaking-new-treatment-for-biofilm-infections-in-foot-ulcers-1 This model's application will help us drive further exploration in this space. - Blutest have appointed one of Gordon's PhD students as a biofilm specialist and Gordon has supported a PostDoc role. Published paper: 10.1038/s41522-022-00286-z
Start Year 2020
 
Description NBIC POC 02POC19134 Standardised complex wound biofilm models - a robust antimicrobial screening tool (Gordon Ramage) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution This project will evaluate the feasibility of a rapid and reproducible commercial assay for testing and screening of active agents against complex multi-species wound biofilms. We aim to develop a high throughput biofilm assay platform capable of testing the anti-biofilm efficacy of bioactive compounds, while simultaneously assessing the impact on inflammatory biomarkers. The concept of the study is to provide a simple and robust platform for a complex problem, using easily quantifiable parameters that enables laboratory personnel within an industrial setting to readily undertake biofilm testing and inflammatory biomarker assessment. Complex wound biofilm models, informed from real patient microbiome analysis at the University of Glasgow (UoG), will be integrated into mammalian cell coculture systems. The USP for this model is our ability to enhance claims support for anti-biofilm molecules, both in terms of a microbial effect and how this alters inflammation. These models will be developed, tested and validated at the University of Glasgow (UoG) prior to technology transfer to BluTest Laboratories (BTL). These model systems will be implemented through training SOPs and onsite training prior to embedding into the established quality assurances systems. This models will then be made commercially available, working with partners such as Smith & Nephew (see letter of support). Success will be measured two-fold, technology transfer of robust high throughout complex wound biofilm model, and future revenues generated by commercial success at BTL. This project fits with the overall mission of NBIC, where we have established a network of research and innovation capacity by forging a close collaboration between industry and academia.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from University of Glasgow: - Overall, the project followed the original plan with only small deviations from those stated in the work plans. - A clinically relevant multi-species biofilm model was developed containing a total of 10- bacterial and 1 fungal species. Previous microbiome analyses by the research group were used to guide the development of the complex polymicrobial wound biofilm model (Smith et al., 2016; Townsend., 2017), which ultimately contained 11- microbial species (10 bacteria and 1 fungal species). - The complex biofilm model was utilised effectively to assess the efficacy of three conventional anti-biofilm washes (CHX, PVP and H2O2). Development of a complex 3D-co-culture system to used to identify potential biomarkers (at a gene and protein level) which could dictate effectiveness of novel treatments moving forward. - Appropriate in-house training was provided for a member of BLT, to grow and treat the biofilms, as well as to handle and process the tissue model. Defined SOPs for all methods were also produced and provided to BLT as part of the technology transfer. - All three conventional anti-biofilm wound washes were effective in reducing the viability of the complex polymicrobial biofilm. However, unique transcriptional and proteomic responses were observed when assessing the response of a 3D skin epidermis model to treated and untreated biofilms. This study has succeeded in identifying possible genes or proteins that could be used as possible biomarkers of inflammation in future anti-biofilm treatment studies. - Considering progressing a patent application. The model composition, SOPs how to construct this and quantitative and qualitative measures have now been transferred to BluTest Laboratories and this is part of their Biofilm Assay Portfolio. - The results of the current study are being compiled into a manuscript for publication. We hope to submit the paper to a high impact biofilm-related journal.. - We used the basis of the model to support a grant application to EPSRC to the value of £369,080 to Glasgow and £1.7M in total: • https://gow.epsrc.ukri.org/NGBOViewGrant.aspx?GrantRef=EP/V005839/1 • https://www.lancaster.ac.uk/materials-science-institute/news/17m-project-to-explore-groundbreaking-new-treatment-for-biofilm-infections-in-foot-ulcers-1 This model's application will help us drive further exploration in this space. - Blutest have appointed one of Gordon's PhD students as a biofilm specialist and Gordon has supported a PostDoc role. Published paper: 10.1038/s41522-022-00286-z
Start Year 2020
 
Description NBIC POC 02POC19140 Rapid Early and Accurate Diagnosis of Wounds (Sourav Ghosh) 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution Project Objectives OB1: Test the feasibility of rapid quantitative detection of bacteria/ biofilm in a wound-mimicking sample using a novel aptamer-beacon-based optical fluorescence detection technique. - OB1.1: Selection of aptamer: Wound-relevant Gram-negative bacterial pathogens will be used as targets. A range of DNA-aptamers reported in the literature to be specific against Gram-negative bacteria will be compared for affinity both in standard saline solution and simulated wound fluid, and the best selected. - OB1.2: Design of aptamer beacon: The chosen aptamer will be used to design a novel aptamer beacon (APCON). APCON's fluorescence will be switched on after binding with bacteria and quantitatively measured using a colour meter. Different designs will be compared and the best selected based on quenching and fluorescence efficiency. - OB1.3: Specificity and dynamic range test: Detection of a range of concentration of target Gram negative species will be explored against a background of Gram-positive bacteria in a simulated wound fluid. Bacteria will be grown both as biofilms and planktonic cultures for the test with APCON. Enzymes will be employed to break bacterial biofilms to access bacteria. OB2: Test the feasibility of determination of rapid antibiotic susceptibility. Both kinds of antibiotics will be explored - against which the bacteria is resistant and susceptible. Effectiveness of antimicrobial dressings on biofilm-forming bacteria will also be established. Success Measurands - SM1: Demonstration of detection of Gram-negative bacteria in a wound-relevant medium in presence of Gram-positive bacteria and protein constituents for a dynamic range of 103/mL-108/mL within 30 min. The key parameters to enable cutting down the diagnostic time will be identified as future opportunities to bring this in line with current standard of care patient treatment times. - SM2: Demonstration of determination of antibiotic susceptibility/ resistance and effectiveness of antimicrobial dressings in line with antimicrobial stewardship in wound care.
Collaborator Contribution Loughborough University: We provided Smith & Nephew with validation data from our rapid single-step bacterial detection assay in a wound-mimic buffer provided by Smith & Nephew. We also shared the data on rapid antimicrobial susceptibility test with response time and minimum inhibitory concentration using antimicrobial products of Smith & Nephew. These data encouraged Smith & Nephew to consider investing in a market analysis exercise for a rapid point-of-care wound diagnostic test to determine the key functional specifications needed and cost targets. Smith & Nephew helped by giving an industry steer. They advised on what could be the potential functional requirement specs of a rapid point-of-care wound test and shared wound-mimic buffer and their commercial antimicrobial products for evaluating our test under development.
Impact Feedback from Loughborough University: - An aptamer beacon (APCON) based method, which targets a specific bacterial surface epitope and transduces the binding in a single step through 'switching on' fluorescence, was successfully designed and validated for rapid quantitative detection of Pseudomonas aeruginosa (PA), a key wound-relevant gram-negative bacterial strain, in both planktonic and biofilm states and determination of antimicrobial sensitivity. - An Intellectual Property application is under consideration by the University's IP team. - A number of journal paper manuscripts have been drafted and will be submitted after the IP application is completed by the University. - The key next step is to extend this technology to validate wound relevant clinical isolates and wound samples by developing a "broad-spectrum" APCON probe and a "broad-spectrum" biofilm disintegrator. - This project has strengthened our engagement with Smith+Nephew. We have also got on board clinicians from Birmingham City University and academics from Lancaster University. - We are working on a grant submission to RCUK on the basis of the results from this NBIC POC2 project. NBIC case study: We regularly help our academic community to find suitable industrial partners to collaborate with on progressing a real-world application of their technology or knowledge either via our workshops, making direct contact or by targeted partner searches. One such partner is Dr Sourav Ghosh from Loughborough University. Loughborough were planning on joining NBIC and as part of our discussions described a diagnostic technology for which they needed a partner. We worked with Dr Ghosh on framing the offering to potentially solve a critical unmet need and then circulating it to our industrial community. The technology is a simple portable test that can perform within 30-45 minutes a single-step detection of whole bacteria and their antibiotic susceptibility. This could for example be in a chronic wound. Dr Ghosh said, "We were looking to find a company who could validate this as an unmet need and with whom we could work together to further develop the test into a useful format. The search that NBIC did for us led to some useful contacts. Ultimately we ended up putting in a POC application with a global leader in this field (Smith & Nephew) which was successful!" Smith & Nephew is a leading medical technology company, operating in around 100 countries globally. Dr Iain Webster, Research & Innovation Director at Smith & Nephew said, "Improperly diagnosed wounds place a heavy burden on global healthcare systems. In the UK, approximately 30% of the wounds are not definitively diagnosed. The economic cost of this to the wider society is comparable with that of managing obesity, which was £27 billion in 2014-15. This proposed rapid, definitive and cost-effective diagnostic test for wound infections could transform the therapy pathways for this problem." The streamlined partner search and NBIC application process allowed both parties to work together to efficiently formulate and submit a POC application. The whole process - from circulating the offering to the community to submitting the NBIC POC application as an industry sponsored collaborative piece of work - only took three weeks. The project will start once the contracting phase is completed.
Start Year 2019
 
Description NBIC POC 02POC19140 Rapid Early and Accurate Diagnosis of Wounds (Sourav Ghosh) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Project Objectives OB1: Test the feasibility of rapid quantitative detection of bacteria/ biofilm in a wound-mimicking sample using a novel aptamer-beacon-based optical fluorescence detection technique. - OB1.1: Selection of aptamer: Wound-relevant Gram-negative bacterial pathogens will be used as targets. A range of DNA-aptamers reported in the literature to be specific against Gram-negative bacteria will be compared for affinity both in standard saline solution and simulated wound fluid, and the best selected. - OB1.2: Design of aptamer beacon: The chosen aptamer will be used to design a novel aptamer beacon (APCON). APCON's fluorescence will be switched on after binding with bacteria and quantitatively measured using a colour meter. Different designs will be compared and the best selected based on quenching and fluorescence efficiency. - OB1.3: Specificity and dynamic range test: Detection of a range of concentration of target Gram negative species will be explored against a background of Gram-positive bacteria in a simulated wound fluid. Bacteria will be grown both as biofilms and planktonic cultures for the test with APCON. Enzymes will be employed to break bacterial biofilms to access bacteria. OB2: Test the feasibility of determination of rapid antibiotic susceptibility. Both kinds of antibiotics will be explored - against which the bacteria is resistant and susceptible. Effectiveness of antimicrobial dressings on biofilm-forming bacteria will also be established. Success Measurands - SM1: Demonstration of detection of Gram-negative bacteria in a wound-relevant medium in presence of Gram-positive bacteria and protein constituents for a dynamic range of 103/mL-108/mL within 30 min. The key parameters to enable cutting down the diagnostic time will be identified as future opportunities to bring this in line with current standard of care patient treatment times. - SM2: Demonstration of determination of antibiotic susceptibility/ resistance and effectiveness of antimicrobial dressings in line with antimicrobial stewardship in wound care.
Collaborator Contribution Loughborough University: We provided Smith & Nephew with validation data from our rapid single-step bacterial detection assay in a wound-mimic buffer provided by Smith & Nephew. We also shared the data on rapid antimicrobial susceptibility test with response time and minimum inhibitory concentration using antimicrobial products of Smith & Nephew. These data encouraged Smith & Nephew to consider investing in a market analysis exercise for a rapid point-of-care wound diagnostic test to determine the key functional specifications needed and cost targets. Smith & Nephew helped by giving an industry steer. They advised on what could be the potential functional requirement specs of a rapid point-of-care wound test and shared wound-mimic buffer and their commercial antimicrobial products for evaluating our test under development.
Impact Feedback from Loughborough University: - An aptamer beacon (APCON) based method, which targets a specific bacterial surface epitope and transduces the binding in a single step through 'switching on' fluorescence, was successfully designed and validated for rapid quantitative detection of Pseudomonas aeruginosa (PA), a key wound-relevant gram-negative bacterial strain, in both planktonic and biofilm states and determination of antimicrobial sensitivity. - An Intellectual Property application is under consideration by the University's IP team. - A number of journal paper manuscripts have been drafted and will be submitted after the IP application is completed by the University. - The key next step is to extend this technology to validate wound relevant clinical isolates and wound samples by developing a "broad-spectrum" APCON probe and a "broad-spectrum" biofilm disintegrator. - This project has strengthened our engagement with Smith+Nephew. We have also got on board clinicians from Birmingham City University and academics from Lancaster University. - We are working on a grant submission to RCUK on the basis of the results from this NBIC POC2 project. NBIC case study: We regularly help our academic community to find suitable industrial partners to collaborate with on progressing a real-world application of their technology or knowledge either via our workshops, making direct contact or by targeted partner searches. One such partner is Dr Sourav Ghosh from Loughborough University. Loughborough were planning on joining NBIC and as part of our discussions described a diagnostic technology for which they needed a partner. We worked with Dr Ghosh on framing the offering to potentially solve a critical unmet need and then circulating it to our industrial community. The technology is a simple portable test that can perform within 30-45 minutes a single-step detection of whole bacteria and their antibiotic susceptibility. This could for example be in a chronic wound. Dr Ghosh said, "We were looking to find a company who could validate this as an unmet need and with whom we could work together to further develop the test into a useful format. The search that NBIC did for us led to some useful contacts. Ultimately we ended up putting in a POC application with a global leader in this field (Smith & Nephew) which was successful!" Smith & Nephew is a leading medical technology company, operating in around 100 countries globally. Dr Iain Webster, Research & Innovation Director at Smith & Nephew said, "Improperly diagnosed wounds place a heavy burden on global healthcare systems. In the UK, approximately 30% of the wounds are not definitively diagnosed. The economic cost of this to the wider society is comparable with that of managing obesity, which was £27 billion in 2014-15. This proposed rapid, definitive and cost-effective diagnostic test for wound infections could transform the therapy pathways for this problem." The streamlined partner search and NBIC application process allowed both parties to work together to efficiently formulate and submit a POC application. The whole process - from circulating the offering to the community to submitting the NBIC POC application as an industry sponsored collaborative piece of work - only took three weeks. The project will start once the contracting phase is completed.
Start Year 2019
 
Description NBIC POC 02POC19140 Rapid Early and Accurate Diagnosis of Wounds (Sourav Ghosh) 
Organisation Smith and Nephew
Country United Kingdom 
Sector Private 
PI Contribution Project Objectives OB1: Test the feasibility of rapid quantitative detection of bacteria/ biofilm in a wound-mimicking sample using a novel aptamer-beacon-based optical fluorescence detection technique. - OB1.1: Selection of aptamer: Wound-relevant Gram-negative bacterial pathogens will be used as targets. A range of DNA-aptamers reported in the literature to be specific against Gram-negative bacteria will be compared for affinity both in standard saline solution and simulated wound fluid, and the best selected. - OB1.2: Design of aptamer beacon: The chosen aptamer will be used to design a novel aptamer beacon (APCON). APCON's fluorescence will be switched on after binding with bacteria and quantitatively measured using a colour meter. Different designs will be compared and the best selected based on quenching and fluorescence efficiency. - OB1.3: Specificity and dynamic range test: Detection of a range of concentration of target Gram negative species will be explored against a background of Gram-positive bacteria in a simulated wound fluid. Bacteria will be grown both as biofilms and planktonic cultures for the test with APCON. Enzymes will be employed to break bacterial biofilms to access bacteria. OB2: Test the feasibility of determination of rapid antibiotic susceptibility. Both kinds of antibiotics will be explored - against which the bacteria is resistant and susceptible. Effectiveness of antimicrobial dressings on biofilm-forming bacteria will also be established. Success Measurands - SM1: Demonstration of detection of Gram-negative bacteria in a wound-relevant medium in presence of Gram-positive bacteria and protein constituents for a dynamic range of 103/mL-108/mL within 30 min. The key parameters to enable cutting down the diagnostic time will be identified as future opportunities to bring this in line with current standard of care patient treatment times. - SM2: Demonstration of determination of antibiotic susceptibility/ resistance and effectiveness of antimicrobial dressings in line with antimicrobial stewardship in wound care.
Collaborator Contribution Loughborough University: We provided Smith & Nephew with validation data from our rapid single-step bacterial detection assay in a wound-mimic buffer provided by Smith & Nephew. We also shared the data on rapid antimicrobial susceptibility test with response time and minimum inhibitory concentration using antimicrobial products of Smith & Nephew. These data encouraged Smith & Nephew to consider investing in a market analysis exercise for a rapid point-of-care wound diagnostic test to determine the key functional specifications needed and cost targets. Smith & Nephew helped by giving an industry steer. They advised on what could be the potential functional requirement specs of a rapid point-of-care wound test and shared wound-mimic buffer and their commercial antimicrobial products for evaluating our test under development.
Impact Feedback from Loughborough University: - An aptamer beacon (APCON) based method, which targets a specific bacterial surface epitope and transduces the binding in a single step through 'switching on' fluorescence, was successfully designed and validated for rapid quantitative detection of Pseudomonas aeruginosa (PA), a key wound-relevant gram-negative bacterial strain, in both planktonic and biofilm states and determination of antimicrobial sensitivity. - An Intellectual Property application is under consideration by the University's IP team. - A number of journal paper manuscripts have been drafted and will be submitted after the IP application is completed by the University. - The key next step is to extend this technology to validate wound relevant clinical isolates and wound samples by developing a "broad-spectrum" APCON probe and a "broad-spectrum" biofilm disintegrator. - This project has strengthened our engagement with Smith+Nephew. We have also got on board clinicians from Birmingham City University and academics from Lancaster University. - We are working on a grant submission to RCUK on the basis of the results from this NBIC POC2 project. NBIC case study: We regularly help our academic community to find suitable industrial partners to collaborate with on progressing a real-world application of their technology or knowledge either via our workshops, making direct contact or by targeted partner searches. One such partner is Dr Sourav Ghosh from Loughborough University. Loughborough were planning on joining NBIC and as part of our discussions described a diagnostic technology for which they needed a partner. We worked with Dr Ghosh on framing the offering to potentially solve a critical unmet need and then circulating it to our industrial community. The technology is a simple portable test that can perform within 30-45 minutes a single-step detection of whole bacteria and their antibiotic susceptibility. This could for example be in a chronic wound. Dr Ghosh said, "We were looking to find a company who could validate this as an unmet need and with whom we could work together to further develop the test into a useful format. The search that NBIC did for us led to some useful contacts. Ultimately we ended up putting in a POC application with a global leader in this field (Smith & Nephew) which was successful!" Smith & Nephew is a leading medical technology company, operating in around 100 countries globally. Dr Iain Webster, Research & Innovation Director at Smith & Nephew said, "Improperly diagnosed wounds place a heavy burden on global healthcare systems. In the UK, approximately 30% of the wounds are not definitively diagnosed. The economic cost of this to the wider society is comparable with that of managing obesity, which was £27 billion in 2014-15. This proposed rapid, definitive and cost-effective diagnostic test for wound infections could transform the therapy pathways for this problem." The streamlined partner search and NBIC application process allowed both parties to work together to efficiently formulate and submit a POC application. The whole process - from circulating the offering to the community to submitting the NBIC POC application as an industry sponsored collaborative piece of work - only took three weeks. The project will start once the contracting phase is completed.
Start Year 2019
 
Description NBIC POC 03POC20-015 Develop a computational tool for marine biofilm management (Jinju Chen) 
Organisation AkzoNobel
Department AkzoNobel UK
Country United Kingdom 
Sector Private 
PI Contribution Ships are fouled by marine biofilms, leading to increased frictional drag and globally significant fuel penalties. Research of marine biofilm in flow (e.g. erosion, drag) is limited by experimental bottlenecks - it can take months for biofilms to grow and approximating ship flow conditions requires large, expensive equipment. Computational modelling of fouling biofilm deformation and drag in flow would provide lowcost, rapid insights complementary to biological and biomechanical experiments and accelerate the development of next generation fouling control coatings. This project - to prove the concept of meso scale modelling as a practical industrial tool for marine fouling - will develop a Discrete Element biofilm Model (DEM) coupled to Computational Fluid Dynamics (CFD-DEM) to predict biofilm deformation and frictional drag in a well-defined experimental system: a meso-scale marine flow cell. Our model will be built on an established modelling framework of Newcastle University's state of the art DEM biofilm model (NUFEB, https://research.ncl.ac.uk/nufeb/science/), but with new features in calibrated biofilm cohesion and surface adhesion. From our live PoC 2 project on biofilm erosion and mechanics we will have multiple flow cell experimental datasets (biofilm mechanical properties, structural changes in flow and frictional drag), which will enable us to calibrate the biofilm model with mechanical properties realistic for marine fouling. The calibrated DEM will be coupled to CFD to model the flow cell hydrodynamics under arbitrary flow and biofilm conditions, again for comparison with the experimental data. Environmental biofilms grown in different conditions will have different makeup and physical-mechanical properties. Additional biofilm experiments will be undertaken in parallel with the modelling work, and then will be used to expand the test of the computational model. Our objectives are to validate the biofilm model parameters against those of experimental fouling biofilms and scope the utility of the computational model for accelerated marine fouling tests. Through the ongoing NBIC POC funded project, we will have a maximum of 8 experimental datasets of biofilm biomechanical properties, measured with Newcastle's unique air-jet indenter system, and biofilm structure in flow, measured with optical coherence tomography, as well as frictional drag coefficient measured by pressure drop in the flow cell. The biomechanical properties will allow us to calibrate the viscoelastic parameters between individual particles in our DEM model. Our industrial partner (JL) would provide us experimental data about shear induced erosion, biofilm deformation and biofilm detachment. We would then use these experimental results to calibrate the cohesive interactions parameters between biofilm particles and adhesive interactions for biofilm particles/solid surface particles in our modelling. Further tests in flow cells will be done to verify the computational modelling developed. With these calibrated properties, the coupled DEM-CFD via OpenFoam (open source) will allow for prediction of marine biofilm removal and drag under marine industrial relevant hydrodynamic conditions. Consequently, this will enable us to rapidly evaluate the antifouling performance of different fouling control paints.
Collaborator Contribution Full collaborative partners in this POC project.
Impact This project developed a computational model to predict the key biofilm processes of erosion, deformation and detachment. We have demonstrated that increased adhesive strength of biofilms and materials surfaces can reduce the erosion and even cause re-attachment. In general, most of biofilm detached subjected to 15Pa wall shear stress. This would address the influence of biofilms on the drag on marine vessels with the aim of improving development of anti-fouling coatings to reduce fuel costs. We submitted a journal paper to submitted to Biotechnology and Bioengineering shortly after the project completed. Our next step is to use the key pilot data generated in NBIC to apply for an EPSRC grant to be submitted by June/July 2022. NBIC provided the detailed feedback in timely manner. NBIC always responded the question promptly. We are very pleased with the NBIC POC process. The NBIC staff are remarkably supportive and helpful. We are very impressed with the support from NBIC in a timely manner when the PI had a significant family bereavement towards the end of the project.
Start Year 2021
 
Description NBIC POC 03POC20-015 Develop a computational tool for marine biofilm management (Jinju Chen) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Ships are fouled by marine biofilms, leading to increased frictional drag and globally significant fuel penalties. Research of marine biofilm in flow (e.g. erosion, drag) is limited by experimental bottlenecks - it can take months for biofilms to grow and approximating ship flow conditions requires large, expensive equipment. Computational modelling of fouling biofilm deformation and drag in flow would provide lowcost, rapid insights complementary to biological and biomechanical experiments and accelerate the development of next generation fouling control coatings. This project - to prove the concept of meso scale modelling as a practical industrial tool for marine fouling - will develop a Discrete Element biofilm Model (DEM) coupled to Computational Fluid Dynamics (CFD-DEM) to predict biofilm deformation and frictional drag in a well-defined experimental system: a meso-scale marine flow cell. Our model will be built on an established modelling framework of Newcastle University's state of the art DEM biofilm model (NUFEB, https://research.ncl.ac.uk/nufeb/science/), but with new features in calibrated biofilm cohesion and surface adhesion. From our live PoC 2 project on biofilm erosion and mechanics we will have multiple flow cell experimental datasets (biofilm mechanical properties, structural changes in flow and frictional drag), which will enable us to calibrate the biofilm model with mechanical properties realistic for marine fouling. The calibrated DEM will be coupled to CFD to model the flow cell hydrodynamics under arbitrary flow and biofilm conditions, again for comparison with the experimental data. Environmental biofilms grown in different conditions will have different makeup and physical-mechanical properties. Additional biofilm experiments will be undertaken in parallel with the modelling work, and then will be used to expand the test of the computational model. Our objectives are to validate the biofilm model parameters against those of experimental fouling biofilms and scope the utility of the computational model for accelerated marine fouling tests. Through the ongoing NBIC POC funded project, we will have a maximum of 8 experimental datasets of biofilm biomechanical properties, measured with Newcastle's unique air-jet indenter system, and biofilm structure in flow, measured with optical coherence tomography, as well as frictional drag coefficient measured by pressure drop in the flow cell. The biomechanical properties will allow us to calibrate the viscoelastic parameters between individual particles in our DEM model. Our industrial partner (JL) would provide us experimental data about shear induced erosion, biofilm deformation and biofilm detachment. We would then use these experimental results to calibrate the cohesive interactions parameters between biofilm particles and adhesive interactions for biofilm particles/solid surface particles in our modelling. Further tests in flow cells will be done to verify the computational modelling developed. With these calibrated properties, the coupled DEM-CFD via OpenFoam (open source) will allow for prediction of marine biofilm removal and drag under marine industrial relevant hydrodynamic conditions. Consequently, this will enable us to rapidly evaluate the antifouling performance of different fouling control paints.
Collaborator Contribution Full collaborative partners in this POC project.
Impact This project developed a computational model to predict the key biofilm processes of erosion, deformation and detachment. We have demonstrated that increased adhesive strength of biofilms and materials surfaces can reduce the erosion and even cause re-attachment. In general, most of biofilm detached subjected to 15Pa wall shear stress. This would address the influence of biofilms on the drag on marine vessels with the aim of improving development of anti-fouling coatings to reduce fuel costs. We submitted a journal paper to submitted to Biotechnology and Bioengineering shortly after the project completed. Our next step is to use the key pilot data generated in NBIC to apply for an EPSRC grant to be submitted by June/July 2022. NBIC provided the detailed feedback in timely manner. NBIC always responded the question promptly. We are very pleased with the NBIC POC process. The NBIC staff are remarkably supportive and helpful. We are very impressed with the support from NBIC in a timely manner when the PI had a significant family bereavement towards the end of the project.
Start Year 2021
 
Description NBIC POC 03POC20-015 Develop a computational tool for marine biofilm management (Jinju Chen) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution Ships are fouled by marine biofilms, leading to increased frictional drag and globally significant fuel penalties. Research of marine biofilm in flow (e.g. erosion, drag) is limited by experimental bottlenecks - it can take months for biofilms to grow and approximating ship flow conditions requires large, expensive equipment. Computational modelling of fouling biofilm deformation and drag in flow would provide lowcost, rapid insights complementary to biological and biomechanical experiments and accelerate the development of next generation fouling control coatings. This project - to prove the concept of meso scale modelling as a practical industrial tool for marine fouling - will develop a Discrete Element biofilm Model (DEM) coupled to Computational Fluid Dynamics (CFD-DEM) to predict biofilm deformation and frictional drag in a well-defined experimental system: a meso-scale marine flow cell. Our model will be built on an established modelling framework of Newcastle University's state of the art DEM biofilm model (NUFEB, https://research.ncl.ac.uk/nufeb/science/), but with new features in calibrated biofilm cohesion and surface adhesion. From our live PoC 2 project on biofilm erosion and mechanics we will have multiple flow cell experimental datasets (biofilm mechanical properties, structural changes in flow and frictional drag), which will enable us to calibrate the biofilm model with mechanical properties realistic for marine fouling. The calibrated DEM will be coupled to CFD to model the flow cell hydrodynamics under arbitrary flow and biofilm conditions, again for comparison with the experimental data. Environmental biofilms grown in different conditions will have different makeup and physical-mechanical properties. Additional biofilm experiments will be undertaken in parallel with the modelling work, and then will be used to expand the test of the computational model. Our objectives are to validate the biofilm model parameters against those of experimental fouling biofilms and scope the utility of the computational model for accelerated marine fouling tests. Through the ongoing NBIC POC funded project, we will have a maximum of 8 experimental datasets of biofilm biomechanical properties, measured with Newcastle's unique air-jet indenter system, and biofilm structure in flow, measured with optical coherence tomography, as well as frictional drag coefficient measured by pressure drop in the flow cell. The biomechanical properties will allow us to calibrate the viscoelastic parameters between individual particles in our DEM model. Our industrial partner (JL) would provide us experimental data about shear induced erosion, biofilm deformation and biofilm detachment. We would then use these experimental results to calibrate the cohesive interactions parameters between biofilm particles and adhesive interactions for biofilm particles/solid surface particles in our modelling. Further tests in flow cells will be done to verify the computational modelling developed. With these calibrated properties, the coupled DEM-CFD via OpenFoam (open source) will allow for prediction of marine biofilm removal and drag under marine industrial relevant hydrodynamic conditions. Consequently, this will enable us to rapidly evaluate the antifouling performance of different fouling control paints.
Collaborator Contribution Full collaborative partners in this POC project.
Impact This project developed a computational model to predict the key biofilm processes of erosion, deformation and detachment. We have demonstrated that increased adhesive strength of biofilms and materials surfaces can reduce the erosion and even cause re-attachment. In general, most of biofilm detached subjected to 15Pa wall shear stress. This would address the influence of biofilms on the drag on marine vessels with the aim of improving development of anti-fouling coatings to reduce fuel costs. We submitted a journal paper to submitted to Biotechnology and Bioengineering shortly after the project completed. Our next step is to use the key pilot data generated in NBIC to apply for an EPSRC grant to be submitted by June/July 2022. NBIC provided the detailed feedback in timely manner. NBIC always responded the question promptly. We are very pleased with the NBIC POC process. The NBIC staff are remarkably supportive and helpful. We are very impressed with the support from NBIC in a timely manner when the PI had a significant family bereavement towards the end of the project.
Start Year 2021
 
Description NBIC POC 03POC20-015 Develop a computational tool for marine biofilm management (Jinju Chen) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Ships are fouled by marine biofilms, leading to increased frictional drag and globally significant fuel penalties. Research of marine biofilm in flow (e.g. erosion, drag) is limited by experimental bottlenecks - it can take months for biofilms to grow and approximating ship flow conditions requires large, expensive equipment. Computational modelling of fouling biofilm deformation and drag in flow would provide lowcost, rapid insights complementary to biological and biomechanical experiments and accelerate the development of next generation fouling control coatings. This project - to prove the concept of meso scale modelling as a practical industrial tool for marine fouling - will develop a Discrete Element biofilm Model (DEM) coupled to Computational Fluid Dynamics (CFD-DEM) to predict biofilm deformation and frictional drag in a well-defined experimental system: a meso-scale marine flow cell. Our model will be built on an established modelling framework of Newcastle University's state of the art DEM biofilm model (NUFEB, https://research.ncl.ac.uk/nufeb/science/), but with new features in calibrated biofilm cohesion and surface adhesion. From our live PoC 2 project on biofilm erosion and mechanics we will have multiple flow cell experimental datasets (biofilm mechanical properties, structural changes in flow and frictional drag), which will enable us to calibrate the biofilm model with mechanical properties realistic for marine fouling. The calibrated DEM will be coupled to CFD to model the flow cell hydrodynamics under arbitrary flow and biofilm conditions, again for comparison with the experimental data. Environmental biofilms grown in different conditions will have different makeup and physical-mechanical properties. Additional biofilm experiments will be undertaken in parallel with the modelling work, and then will be used to expand the test of the computational model. Our objectives are to validate the biofilm model parameters against those of experimental fouling biofilms and scope the utility of the computational model for accelerated marine fouling tests. Through the ongoing NBIC POC funded project, we will have a maximum of 8 experimental datasets of biofilm biomechanical properties, measured with Newcastle's unique air-jet indenter system, and biofilm structure in flow, measured with optical coherence tomography, as well as frictional drag coefficient measured by pressure drop in the flow cell. The biomechanical properties will allow us to calibrate the viscoelastic parameters between individual particles in our DEM model. Our industrial partner (JL) would provide us experimental data about shear induced erosion, biofilm deformation and biofilm detachment. We would then use these experimental results to calibrate the cohesive interactions parameters between biofilm particles and adhesive interactions for biofilm particles/solid surface particles in our modelling. Further tests in flow cells will be done to verify the computational modelling developed. With these calibrated properties, the coupled DEM-CFD via OpenFoam (open source) will allow for prediction of marine biofilm removal and drag under marine industrial relevant hydrodynamic conditions. Consequently, this will enable us to rapidly evaluate the antifouling performance of different fouling control paints.
Collaborator Contribution Full collaborative partners in this POC project.
Impact This project developed a computational model to predict the key biofilm processes of erosion, deformation and detachment. We have demonstrated that increased adhesive strength of biofilms and materials surfaces can reduce the erosion and even cause re-attachment. In general, most of biofilm detached subjected to 15Pa wall shear stress. This would address the influence of biofilms on the drag on marine vessels with the aim of improving development of anti-fouling coatings to reduce fuel costs. We submitted a journal paper to submitted to Biotechnology and Bioengineering shortly after the project completed. Our next step is to use the key pilot data generated in NBIC to apply for an EPSRC grant to be submitted by June/July 2022. NBIC provided the detailed feedback in timely manner. NBIC always responded the question promptly. We are very pleased with the NBIC POC process. The NBIC staff are remarkably supportive and helpful. We are very impressed with the support from NBIC in a timely manner when the PI had a significant family bereavement towards the end of the project.
Start Year 2021
 
Description NBIC POC 03POC20-019 Biofilm Production of Phaeodactylum Tricornutum for Fucoxanthin (Mike Allen) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall aim of this project is to investigate the potential for the cultivation of the biofilm-forming microalgae Phaeodactylum tricornutum, for the production of fucoxanthin on a moving membrane bioreactor (MMBR) (see Appendix 1). The MMBR platform has been developed and tested during previous research projects (Innovate UK: 132192, and NBIC A0789) reaching a TRL level of 4 and has been proven suitable for the cultivation of multiple microalgae species including Haematococcus pluvialis and Chlorella sorokiniana at pilot scale (2019). Comparisons of growth rates to conventional planktonic production systems have been favourable (see Appendix 3). However, the MMBR platform has not yet been utilised to explore the production of more novel and commercially interesting strains such as the benthic diatom P. tricornutum (TRL 1-2).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Confidential pending potential exploitation of IP. Specific environmental benefits could include a reduction in energy use (24%), reduction in water use (16%) alongside a reduction in other chemical use of 28%. The consortium will look to make a submission for the Smart Grant scheme (Innovate UK). We have already made a Future Leaders Fellowship application (UKRI) based on developing the membrane technology with commercial partners across the microalgal value chain (awaiting to hear feedback).
Start Year 2020
 
Description NBIC POC 03POC20-019 Biofilm Production of Phaeodactylum Tricornutum for Fucoxanthin (Mike Allen) 
Organisation Plymouth Marine Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall aim of this project is to investigate the potential for the cultivation of the biofilm-forming microalgae Phaeodactylum tricornutum, for the production of fucoxanthin on a moving membrane bioreactor (MMBR) (see Appendix 1). The MMBR platform has been developed and tested during previous research projects (Innovate UK: 132192, and NBIC A0789) reaching a TRL level of 4 and has been proven suitable for the cultivation of multiple microalgae species including Haematococcus pluvialis and Chlorella sorokiniana at pilot scale (2019). Comparisons of growth rates to conventional planktonic production systems have been favourable (see Appendix 3). However, the MMBR platform has not yet been utilised to explore the production of more novel and commercially interesting strains such as the benthic diatom P. tricornutum (TRL 1-2).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Confidential pending potential exploitation of IP. Specific environmental benefits could include a reduction in energy use (24%), reduction in water use (16%) alongside a reduction in other chemical use of 28%. The consortium will look to make a submission for the Smart Grant scheme (Innovate UK). We have already made a Future Leaders Fellowship application (UKRI) based on developing the membrane technology with commercial partners across the microalgal value chain (awaiting to hear feedback).
Start Year 2020
 
Description NBIC POC 03POC20-019 Biofilm Production of Phaeodactylum Tricornutum for Fucoxanthin (Mike Allen) 
Organisation Varicon Aqua Solutions Ltd
Country United Kingdom 
Sector Private 
PI Contribution The overall aim of this project is to investigate the potential for the cultivation of the biofilm-forming microalgae Phaeodactylum tricornutum, for the production of fucoxanthin on a moving membrane bioreactor (MMBR) (see Appendix 1). The MMBR platform has been developed and tested during previous research projects (Innovate UK: 132192, and NBIC A0789) reaching a TRL level of 4 and has been proven suitable for the cultivation of multiple microalgae species including Haematococcus pluvialis and Chlorella sorokiniana at pilot scale (2019). Comparisons of growth rates to conventional planktonic production systems have been favourable (see Appendix 3). However, the MMBR platform has not yet been utilised to explore the production of more novel and commercially interesting strains such as the benthic diatom P. tricornutum (TRL 1-2).
Collaborator Contribution Full collaborative partners in this POC project.
Impact Confidential pending potential exploitation of IP. Specific environmental benefits could include a reduction in energy use (24%), reduction in water use (16%) alongside a reduction in other chemical use of 28%. The consortium will look to make a submission for the Smart Grant scheme (Innovate UK). We have already made a Future Leaders Fellowship application (UKRI) based on developing the membrane technology with commercial partners across the microalgal value chain (awaiting to hear feedback).
Start Year 2020
 
Description NBIC POC 03POC20-020 Novel XF drugs in the topical management of Candida albicans biofilms (David Williams) 
Organisation Cardiff University
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of this project is to determine the effectiveness of novel XF-drugs in inhibiting fungal biofilms of Candida albicans via twin mechanisms of action, namely [1] innate antifungal and [2] light activated (photodynamic). Success will be measured post treatment, by significant reduction (compared to untreated controls) in viable Candida numbers, biofilm thickness and pathogenic outcome of biofilms infecting in vitro oral mucosal models (Figure 1). Experiments will involve three XF-drugs and will establish minimum inhibitory concentrations (MICs) and minimum biofilm eradication concentrations (MBECs) against C. albicans. The inhibitory effects of XF-drugs determined on CDC bioreactor generated biofilms will be established by confocal laser scanning microscopy (CLSM), which will enable biovolume and live/dead ratios of fungal cells to be determined. Constructed biofilms will be used to infect reconstituted human oral mucosa and comparisons made between C. albicans tissue invasion and lactate dehydrogenase activity for XF-drug treated and untreated biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Following from this project we will begin to prepare a manuscript for publication and Destiny Pharma will determine the next steps in the development process for anti-fungal indications for the XF drugs, particularly XF 73 and XF 70. This project has demonstrated that XF drugs are effective treatment options for Candida biofilms. The low MIC values make the XF drugs competitive treatment alternatives, with dramatic effects against both biofilms and subsequent tissue effects observed. We concluded that XF drugs kill (XF-73 and XF-70) or reduce (DPD-207) Candida biofilms, in addition to reducing the pathogenicity of Candida biofilms towards human oral epithelium.
Start Year 2021
 
Description NBIC POC 03POC20-020 Novel XF drugs in the topical management of Candida albicans biofilms (David Williams) 
Organisation Destiny Pharma
Country United Kingdom 
Sector Private 
PI Contribution The aim of this project is to determine the effectiveness of novel XF-drugs in inhibiting fungal biofilms of Candida albicans via twin mechanisms of action, namely [1] innate antifungal and [2] light activated (photodynamic). Success will be measured post treatment, by significant reduction (compared to untreated controls) in viable Candida numbers, biofilm thickness and pathogenic outcome of biofilms infecting in vitro oral mucosal models (Figure 1). Experiments will involve three XF-drugs and will establish minimum inhibitory concentrations (MICs) and minimum biofilm eradication concentrations (MBECs) against C. albicans. The inhibitory effects of XF-drugs determined on CDC bioreactor generated biofilms will be established by confocal laser scanning microscopy (CLSM), which will enable biovolume and live/dead ratios of fungal cells to be determined. Constructed biofilms will be used to infect reconstituted human oral mucosa and comparisons made between C. albicans tissue invasion and lactate dehydrogenase activity for XF-drug treated and untreated biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Following from this project we will begin to prepare a manuscript for publication and Destiny Pharma will determine the next steps in the development process for anti-fungal indications for the XF drugs, particularly XF 73 and XF 70. This project has demonstrated that XF drugs are effective treatment options for Candida biofilms. The low MIC values make the XF drugs competitive treatment alternatives, with dramatic effects against both biofilms and subsequent tissue effects observed. We concluded that XF drugs kill (XF-73 and XF-70) or reduce (DPD-207) Candida biofilms, in addition to reducing the pathogenicity of Candida biofilms towards human oral epithelium.
Start Year 2021
 
Description NBIC POC 03POC20-020 Novel XF drugs in the topical management of Candida albicans biofilms (David Williams) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of this project is to determine the effectiveness of novel XF-drugs in inhibiting fungal biofilms of Candida albicans via twin mechanisms of action, namely [1] innate antifungal and [2] light activated (photodynamic). Success will be measured post treatment, by significant reduction (compared to untreated controls) in viable Candida numbers, biofilm thickness and pathogenic outcome of biofilms infecting in vitro oral mucosal models (Figure 1). Experiments will involve three XF-drugs and will establish minimum inhibitory concentrations (MICs) and minimum biofilm eradication concentrations (MBECs) against C. albicans. The inhibitory effects of XF-drugs determined on CDC bioreactor generated biofilms will be established by confocal laser scanning microscopy (CLSM), which will enable biovolume and live/dead ratios of fungal cells to be determined. Constructed biofilms will be used to infect reconstituted human oral mucosa and comparisons made between C. albicans tissue invasion and lactate dehydrogenase activity for XF-drug treated and untreated biofilms.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Following from this project we will begin to prepare a manuscript for publication and Destiny Pharma will determine the next steps in the development process for anti-fungal indications for the XF drugs, particularly XF 73 and XF 70. This project has demonstrated that XF drugs are effective treatment options for Candida biofilms. The low MIC values make the XF drugs competitive treatment alternatives, with dramatic effects against both biofilms and subsequent tissue effects observed. We concluded that XF drugs kill (XF-73 and XF-70) or reduce (DPD-207) Candida biofilms, in addition to reducing the pathogenicity of Candida biofilms towards human oral epithelium.
Start Year 2021
 
Description NBIC POC 03POC20-042 Development of molecular support to Detect biofilm causing pathogens within chronic infections (Karen Ousey) 
Organisation Mid Yorkshire Hospitals NHS Trust
Country United Kingdom 
Sector Public 
PI Contribution Aim: To develop a methodology which will allow for biofilm forming genes to be easily detected from a patient or dressing swab sample. This methodology would ultimately become a tool to confirm the presence of biofilm forming bacteria within a chronic wound or infection site. The study aims to compare the presence and expression of biofilm forming genes on patient skin and within chronic wounds in order to determine a significant difference in gene expression of biofilm pathogens. Success will result from meaningful reproducible data, demonstrating a variation in the genetic expression of bacteria within a chronic environment compared to the same species of commensal skin organisms. Currently swab samples are taken from patients in order to determine the presence of infection but the biofilm forming nature of the organisms is not assessed. This leaves clinicians unable to confirm the presence of a biofilm infection within a chronic wound - in many cases this is suspected but not confirmed. The ultimate aim of the study (following on from this small-scale project) will be to develop a multiplex QPCR offering that can quickly and cheaply screen wound isolates for the presence of biofilm forming genes and the expression of RNA relating to the expression of these genes. In order to assess the biofilm status of the pathogens we aim to use QPCR techniques, Multiplexing techniques and also Sanger sequencing in order to determine if the same bacterial strain is inhabiting the skin and the wound. Plan: Perectus Biomed have primers that identify biofilm forming genes in Staphylococus aureus and Pseudomonas aeruginosa. scientists will extend this list to additional wound pathogens including E. coli, Klebsiella phneumoni and streptococcus entericus. Following primer design, a clinical study will be established and patients will be chosen according to inclusion and exclusion criteria. Swab samples will be taken from chronic wounds and healthy skin on the contralateral (uninjured) limb. Sequencing techniques will be utilised to draw a comparison between the microbiota of intact skin and infected wounds. The biofilm gene status of the organisms will be compared between healthy skin and wounds, and between patients. Output: assess potential of a multiplex QPCR assay to identify markers / genes that are linked to wound chronicity and biofilm formation.
Collaborator Contribution University of Huddersfield: have provided subject expertise to Perfectus in relation to wound management, wound types and how biofilm is assessed and understood in clinical practice. Mid Yorkshire NHS Trust have submitted the IREAS and HRA applications to allow the sample to be accessed. Perfectus have provided the scientific expertise for development of the model. they have addressed uncertainties surrounding transport mediums which have now been fully explored and we have a safe and effective transport medium for the samples. Mid Yorkshire NHS Trust have provided the sample for biofilm for the study.
Impact Feedback from University of Huddersfield: This study has demonstrated that it was possible to sample from patients with minimal training and basic instructions and transport the samples to a partner laboratory for processing. Kits were prepared to be stored at room temperature prior to use and 4°C after use. This demonstrates that the assay could be introduced to a typical clinic without the need for specialist equipment or staff. Genetic material was harvested from the microorganisms collected and the genomic DNA was of sufficient concentration and quality for use in qPCR for species identification. mRNA was found to be at a low concentration and did not yield consistent results. However, the observation of some positive results suggests that the principle of the assay works, if mRNA is present in high enough concentration. Combining the bacterial detection data with the results of the patient questionnaire has provided information about the presence and absence of correlations for various factors. This will identify red flags, or confirm known red flags, about certain factors increasing risks for wounds and could be used to guide treatment. Further work: A paper based on this study is being prepared for submission to the Journal of Antimicrobial Chemotherapy and abstracts have been submitted for poster presentation at two wound care conferences. This study has shown that this method of sampling could work in principle, however a higher concentration of mRNA would be required to get meaningful qPCR data. This could involve optimising the collection of the samples and the extraction process. Further testing could involve testing for expression of a range of biofilm genes covering different areas of biofilm formation. Further information could also be gained from the species detection data using sequencing to identify the strains isolated from wound and contralateral samples to look for genetic variation. As sequencing technology becomes more affordable and accessible over the coming decade, there may be an option to investigate a sequencing based approach for this assay. We intend to: Publish the results in a peer reviewed journal and develop a model for detection of biofilm pathogens.
Start Year 2019
 
Description NBIC POC 03POC20-042 Development of molecular support to Detect biofilm causing pathogens within chronic infections (Karen Ousey) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Aim: To develop a methodology which will allow for biofilm forming genes to be easily detected from a patient or dressing swab sample. This methodology would ultimately become a tool to confirm the presence of biofilm forming bacteria within a chronic wound or infection site. The study aims to compare the presence and expression of biofilm forming genes on patient skin and within chronic wounds in order to determine a significant difference in gene expression of biofilm pathogens. Success will result from meaningful reproducible data, demonstrating a variation in the genetic expression of bacteria within a chronic environment compared to the same species of commensal skin organisms. Currently swab samples are taken from patients in order to determine the presence of infection but the biofilm forming nature of the organisms is not assessed. This leaves clinicians unable to confirm the presence of a biofilm infection within a chronic wound - in many cases this is suspected but not confirmed. The ultimate aim of the study (following on from this small-scale project) will be to develop a multiplex QPCR offering that can quickly and cheaply screen wound isolates for the presence of biofilm forming genes and the expression of RNA relating to the expression of these genes. In order to assess the biofilm status of the pathogens we aim to use QPCR techniques, Multiplexing techniques and also Sanger sequencing in order to determine if the same bacterial strain is inhabiting the skin and the wound. Plan: Perectus Biomed have primers that identify biofilm forming genes in Staphylococus aureus and Pseudomonas aeruginosa. scientists will extend this list to additional wound pathogens including E. coli, Klebsiella phneumoni and streptococcus entericus. Following primer design, a clinical study will be established and patients will be chosen according to inclusion and exclusion criteria. Swab samples will be taken from chronic wounds and healthy skin on the contralateral (uninjured) limb. Sequencing techniques will be utilised to draw a comparison between the microbiota of intact skin and infected wounds. The biofilm gene status of the organisms will be compared between healthy skin and wounds, and between patients. Output: assess potential of a multiplex QPCR assay to identify markers / genes that are linked to wound chronicity and biofilm formation.
Collaborator Contribution University of Huddersfield: have provided subject expertise to Perfectus in relation to wound management, wound types and how biofilm is assessed and understood in clinical practice. Mid Yorkshire NHS Trust have submitted the IREAS and HRA applications to allow the sample to be accessed. Perfectus have provided the scientific expertise for development of the model. they have addressed uncertainties surrounding transport mediums which have now been fully explored and we have a safe and effective transport medium for the samples. Mid Yorkshire NHS Trust have provided the sample for biofilm for the study.
Impact Feedback from University of Huddersfield: This study has demonstrated that it was possible to sample from patients with minimal training and basic instructions and transport the samples to a partner laboratory for processing. Kits were prepared to be stored at room temperature prior to use and 4°C after use. This demonstrates that the assay could be introduced to a typical clinic without the need for specialist equipment or staff. Genetic material was harvested from the microorganisms collected and the genomic DNA was of sufficient concentration and quality for use in qPCR for species identification. mRNA was found to be at a low concentration and did not yield consistent results. However, the observation of some positive results suggests that the principle of the assay works, if mRNA is present in high enough concentration. Combining the bacterial detection data with the results of the patient questionnaire has provided information about the presence and absence of correlations for various factors. This will identify red flags, or confirm known red flags, about certain factors increasing risks for wounds and could be used to guide treatment. Further work: A paper based on this study is being prepared for submission to the Journal of Antimicrobial Chemotherapy and abstracts have been submitted for poster presentation at two wound care conferences. This study has shown that this method of sampling could work in principle, however a higher concentration of mRNA would be required to get meaningful qPCR data. This could involve optimising the collection of the samples and the extraction process. Further testing could involve testing for expression of a range of biofilm genes covering different areas of biofilm formation. Further information could also be gained from the species detection data using sequencing to identify the strains isolated from wound and contralateral samples to look for genetic variation. As sequencing technology becomes more affordable and accessible over the coming decade, there may be an option to investigate a sequencing based approach for this assay. We intend to: Publish the results in a peer reviewed journal and develop a model for detection of biofilm pathogens.
Start Year 2019
 
Description NBIC POC 03POC20-042 Development of molecular support to Detect biofilm causing pathogens within chronic infections (Karen Ousey) 
Organisation Perfectus Biomed Ltd.
Country United Kingdom 
Sector Private 
PI Contribution Aim: To develop a methodology which will allow for biofilm forming genes to be easily detected from a patient or dressing swab sample. This methodology would ultimately become a tool to confirm the presence of biofilm forming bacteria within a chronic wound or infection site. The study aims to compare the presence and expression of biofilm forming genes on patient skin and within chronic wounds in order to determine a significant difference in gene expression of biofilm pathogens. Success will result from meaningful reproducible data, demonstrating a variation in the genetic expression of bacteria within a chronic environment compared to the same species of commensal skin organisms. Currently swab samples are taken from patients in order to determine the presence of infection but the biofilm forming nature of the organisms is not assessed. This leaves clinicians unable to confirm the presence of a biofilm infection within a chronic wound - in many cases this is suspected but not confirmed. The ultimate aim of the study (following on from this small-scale project) will be to develop a multiplex QPCR offering that can quickly and cheaply screen wound isolates for the presence of biofilm forming genes and the expression of RNA relating to the expression of these genes. In order to assess the biofilm status of the pathogens we aim to use QPCR techniques, Multiplexing techniques and also Sanger sequencing in order to determine if the same bacterial strain is inhabiting the skin and the wound. Plan: Perectus Biomed have primers that identify biofilm forming genes in Staphylococus aureus and Pseudomonas aeruginosa. scientists will extend this list to additional wound pathogens including E. coli, Klebsiella phneumoni and streptococcus entericus. Following primer design, a clinical study will be established and patients will be chosen according to inclusion and exclusion criteria. Swab samples will be taken from chronic wounds and healthy skin on the contralateral (uninjured) limb. Sequencing techniques will be utilised to draw a comparison between the microbiota of intact skin and infected wounds. The biofilm gene status of the organisms will be compared between healthy skin and wounds, and between patients. Output: assess potential of a multiplex QPCR assay to identify markers / genes that are linked to wound chronicity and biofilm formation.
Collaborator Contribution University of Huddersfield: have provided subject expertise to Perfectus in relation to wound management, wound types and how biofilm is assessed and understood in clinical practice. Mid Yorkshire NHS Trust have submitted the IREAS and HRA applications to allow the sample to be accessed. Perfectus have provided the scientific expertise for development of the model. they have addressed uncertainties surrounding transport mediums which have now been fully explored and we have a safe and effective transport medium for the samples. Mid Yorkshire NHS Trust have provided the sample for biofilm for the study.
Impact Feedback from University of Huddersfield: This study has demonstrated that it was possible to sample from patients with minimal training and basic instructions and transport the samples to a partner laboratory for processing. Kits were prepared to be stored at room temperature prior to use and 4°C after use. This demonstrates that the assay could be introduced to a typical clinic without the need for specialist equipment or staff. Genetic material was harvested from the microorganisms collected and the genomic DNA was of sufficient concentration and quality for use in qPCR for species identification. mRNA was found to be at a low concentration and did not yield consistent results. However, the observation of some positive results suggests that the principle of the assay works, if mRNA is present in high enough concentration. Combining the bacterial detection data with the results of the patient questionnaire has provided information about the presence and absence of correlations for various factors. This will identify red flags, or confirm known red flags, about certain factors increasing risks for wounds and could be used to guide treatment. Further work: A paper based on this study is being prepared for submission to the Journal of Antimicrobial Chemotherapy and abstracts have been submitted for poster presentation at two wound care conferences. This study has shown that this method of sampling could work in principle, however a higher concentration of mRNA would be required to get meaningful qPCR data. This could involve optimising the collection of the samples and the extraction process. Further testing could involve testing for expression of a range of biofilm genes covering different areas of biofilm formation. Further information could also be gained from the species detection data using sequencing to identify the strains isolated from wound and contralateral samples to look for genetic variation. As sequencing technology becomes more affordable and accessible over the coming decade, there may be an option to investigate a sequencing based approach for this assay. We intend to: Publish the results in a peer reviewed journal and develop a model for detection of biofilm pathogens.
Start Year 2019
 
Description NBIC POC 03POC20-042 Development of molecular support to Detect biofilm causing pathogens within chronic infections (Karen Ousey) 
Organisation University of Huddersfield
Country United Kingdom 
Sector Academic/University 
PI Contribution Aim: To develop a methodology which will allow for biofilm forming genes to be easily detected from a patient or dressing swab sample. This methodology would ultimately become a tool to confirm the presence of biofilm forming bacteria within a chronic wound or infection site. The study aims to compare the presence and expression of biofilm forming genes on patient skin and within chronic wounds in order to determine a significant difference in gene expression of biofilm pathogens. Success will result from meaningful reproducible data, demonstrating a variation in the genetic expression of bacteria within a chronic environment compared to the same species of commensal skin organisms. Currently swab samples are taken from patients in order to determine the presence of infection but the biofilm forming nature of the organisms is not assessed. This leaves clinicians unable to confirm the presence of a biofilm infection within a chronic wound - in many cases this is suspected but not confirmed. The ultimate aim of the study (following on from this small-scale project) will be to develop a multiplex QPCR offering that can quickly and cheaply screen wound isolates for the presence of biofilm forming genes and the expression of RNA relating to the expression of these genes. In order to assess the biofilm status of the pathogens we aim to use QPCR techniques, Multiplexing techniques and also Sanger sequencing in order to determine if the same bacterial strain is inhabiting the skin and the wound. Plan: Perectus Biomed have primers that identify biofilm forming genes in Staphylococus aureus and Pseudomonas aeruginosa. scientists will extend this list to additional wound pathogens including E. coli, Klebsiella phneumoni and streptococcus entericus. Following primer design, a clinical study will be established and patients will be chosen according to inclusion and exclusion criteria. Swab samples will be taken from chronic wounds and healthy skin on the contralateral (uninjured) limb. Sequencing techniques will be utilised to draw a comparison between the microbiota of intact skin and infected wounds. The biofilm gene status of the organisms will be compared between healthy skin and wounds, and between patients. Output: assess potential of a multiplex QPCR assay to identify markers / genes that are linked to wound chronicity and biofilm formation.
Collaborator Contribution University of Huddersfield: have provided subject expertise to Perfectus in relation to wound management, wound types and how biofilm is assessed and understood in clinical practice. Mid Yorkshire NHS Trust have submitted the IREAS and HRA applications to allow the sample to be accessed. Perfectus have provided the scientific expertise for development of the model. they have addressed uncertainties surrounding transport mediums which have now been fully explored and we have a safe and effective transport medium for the samples. Mid Yorkshire NHS Trust have provided the sample for biofilm for the study.
Impact Feedback from University of Huddersfield: This study has demonstrated that it was possible to sample from patients with minimal training and basic instructions and transport the samples to a partner laboratory for processing. Kits were prepared to be stored at room temperature prior to use and 4°C after use. This demonstrates that the assay could be introduced to a typical clinic without the need for specialist equipment or staff. Genetic material was harvested from the microorganisms collected and the genomic DNA was of sufficient concentration and quality for use in qPCR for species identification. mRNA was found to be at a low concentration and did not yield consistent results. However, the observation of some positive results suggests that the principle of the assay works, if mRNA is present in high enough concentration. Combining the bacterial detection data with the results of the patient questionnaire has provided information about the presence and absence of correlations for various factors. This will identify red flags, or confirm known red flags, about certain factors increasing risks for wounds and could be used to guide treatment. Further work: A paper based on this study is being prepared for submission to the Journal of Antimicrobial Chemotherapy and abstracts have been submitted for poster presentation at two wound care conferences. This study has shown that this method of sampling could work in principle, however a higher concentration of mRNA would be required to get meaningful qPCR data. This could involve optimising the collection of the samples and the extraction process. Further testing could involve testing for expression of a range of biofilm genes covering different areas of biofilm formation. Further information could also be gained from the species detection data using sequencing to identify the strains isolated from wound and contralateral samples to look for genetic variation. As sequencing technology becomes more affordable and accessible over the coming decade, there may be an option to investigate a sequencing based approach for this assay. We intend to: Publish the results in a peer reviewed journal and develop a model for detection of biofilm pathogens.
Start Year 2019
 
Description NBIC POC 03POC20-066 Rotating Spiral Biofilm Reactor for Reliable Engineering and Control of Bacterial Communities and Environments for use in industrial biotechnology (Esther Karunakaran and Craig Jones) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The aim of this project is to deliver the prototype of a novel, purpose-designed biofilm device for continuous production and extraction of bio-based chemicals. We refer to this novel device as the rotating spiral biofilm reactor-separator, the fundamentals of which have been in development for the last decade in the University of Sheffield. The exemplar bio-based chemical is phenyl ethyl alcohol, responsible for the characteristic rose scent, production of which demonstrates typical challenges encountered during upstream and downstream bioprocessing. Upstream challenges include product toxicity limiting final titres and slow growth rates affecting volumetric productivity. Downstream challenges include low recovery due to highly polar nature of the product and need for resource-intensive cell-liquid separation techniques. We contend that our novel device provides effective solutions to these challenges. The reactor-separator consists of a spiral channel under centrifugal acceleration. This acceleration holds the biofilm securely against the outer wall of the channel and pressure gradient with centrifugal acceleration allows culture media to flow in a thin layer over the biofilm with parallel flow of a second immiscible extractant. The product accumulating in the culture medium is thereby extracted into this second liquid, which flows against the inner wall of the channel due to its low density. Simultaneous extraction of product by liquid-liquid contacting precludes toxicity. Biofilm formation decouples growth from volumetric productivity and together with centrifugal acceleration retains cells within the reactor, avoiding need for downstream cell-liquid separation. Spiral design allows extended contact time, improving product recovery. In this project, deliverables include demonstration of these benefits and construction of the prototype device. Success of the project will be continuously assessed and measured by achievement of deliverables (annex 1), timely progression according to Gantt chart (annex 1) and establishment of good working relationships between project partners to allow maximum exploitation of findings generated. The detailed description of the project activities is provided in Annex 1 along with considerations of potential risk factors and strategies for mitigating them. The project will take place in four work packages (WP). WP1 establishes the relevant physical properties of the target biofilm/media/solvent system that must be known before the design can be finalised. The creation of the new prototype device is the task of WP2, which breaks up into 1) predictive design computations using our existing models 2) detailed design work, including fabrication of parts and component sourcing and 3) assembly, adjustment, protocol development and refining. Data revealing the extent of biofilm reaction and of product extraction, comprising product concentration measurements at the two outlets, are obtained in WP3, where baseline measurements are first obtained for the target biofilm system using the existing research spiral apparatus. Tests of the new device will include both short (hours) and long (days) continuous operation. In WP4 Unilever will be invited to Sheffield to see demonstrations of the prototype.
Collaborator Contribution Unilever are in the process of writing patents to control access to rotating spiral reactor use in the area of Home and Personal Care. We applied for funding to enlarge the scope of application, but budget squeeze at Unilever have held this up. Unilever will encourage one of their suppliers of fragrances (Firmenich, Switzerland) to work with us to produce a commercial machine.
Impact Further funding support and patent coverage are pending.
Start Year 2021
 
Description NBIC POC 03POC20-066 Rotating Spiral Biofilm Reactor for Reliable Engineering and Control of Bacterial Communities and Environments for use in industrial biotechnology (Esther Karunakaran and Craig Jones) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution The aim of this project is to deliver the prototype of a novel, purpose-designed biofilm device for continuous production and extraction of bio-based chemicals. We refer to this novel device as the rotating spiral biofilm reactor-separator, the fundamentals of which have been in development for the last decade in the University of Sheffield. The exemplar bio-based chemical is phenyl ethyl alcohol, responsible for the characteristic rose scent, production of which demonstrates typical challenges encountered during upstream and downstream bioprocessing. Upstream challenges include product toxicity limiting final titres and slow growth rates affecting volumetric productivity. Downstream challenges include low recovery due to highly polar nature of the product and need for resource-intensive cell-liquid separation techniques. We contend that our novel device provides effective solutions to these challenges. The reactor-separator consists of a spiral channel under centrifugal acceleration. This acceleration holds the biofilm securely against the outer wall of the channel and pressure gradient with centrifugal acceleration allows culture media to flow in a thin layer over the biofilm with parallel flow of a second immiscible extractant. The product accumulating in the culture medium is thereby extracted into this second liquid, which flows against the inner wall of the channel due to its low density. Simultaneous extraction of product by liquid-liquid contacting precludes toxicity. Biofilm formation decouples growth from volumetric productivity and together with centrifugal acceleration retains cells within the reactor, avoiding need for downstream cell-liquid separation. Spiral design allows extended contact time, improving product recovery. In this project, deliverables include demonstration of these benefits and construction of the prototype device. Success of the project will be continuously assessed and measured by achievement of deliverables (annex 1), timely progression according to Gantt chart (annex 1) and establishment of good working relationships between project partners to allow maximum exploitation of findings generated. The detailed description of the project activities is provided in Annex 1 along with considerations of potential risk factors and strategies for mitigating them. The project will take place in four work packages (WP). WP1 establishes the relevant physical properties of the target biofilm/media/solvent system that must be known before the design can be finalised. The creation of the new prototype device is the task of WP2, which breaks up into 1) predictive design computations using our existing models 2) detailed design work, including fabrication of parts and component sourcing and 3) assembly, adjustment, protocol development and refining. Data revealing the extent of biofilm reaction and of product extraction, comprising product concentration measurements at the two outlets, are obtained in WP3, where baseline measurements are first obtained for the target biofilm system using the existing research spiral apparatus. Tests of the new device will include both short (hours) and long (days) continuous operation. In WP4 Unilever will be invited to Sheffield to see demonstrations of the prototype.
Collaborator Contribution Unilever are in the process of writing patents to control access to rotating spiral reactor use in the area of Home and Personal Care. We applied for funding to enlarge the scope of application, but budget squeeze at Unilever have held this up. Unilever will encourage one of their suppliers of fragrances (Firmenich, Switzerland) to work with us to produce a commercial machine.
Impact Further funding support and patent coverage are pending.
Start Year 2021
 
Description NBIC POC 03POC20-066 Rotating Spiral Biofilm Reactor for Reliable Engineering and Control of Bacterial Communities and Environments for use in industrial biotechnology (Esther Karunakaran and Craig Jones) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution The aim of this project is to deliver the prototype of a novel, purpose-designed biofilm device for continuous production and extraction of bio-based chemicals. We refer to this novel device as the rotating spiral biofilm reactor-separator, the fundamentals of which have been in development for the last decade in the University of Sheffield. The exemplar bio-based chemical is phenyl ethyl alcohol, responsible for the characteristic rose scent, production of which demonstrates typical challenges encountered during upstream and downstream bioprocessing. Upstream challenges include product toxicity limiting final titres and slow growth rates affecting volumetric productivity. Downstream challenges include low recovery due to highly polar nature of the product and need for resource-intensive cell-liquid separation techniques. We contend that our novel device provides effective solutions to these challenges. The reactor-separator consists of a spiral channel under centrifugal acceleration. This acceleration holds the biofilm securely against the outer wall of the channel and pressure gradient with centrifugal acceleration allows culture media to flow in a thin layer over the biofilm with parallel flow of a second immiscible extractant. The product accumulating in the culture medium is thereby extracted into this second liquid, which flows against the inner wall of the channel due to its low density. Simultaneous extraction of product by liquid-liquid contacting precludes toxicity. Biofilm formation decouples growth from volumetric productivity and together with centrifugal acceleration retains cells within the reactor, avoiding need for downstream cell-liquid separation. Spiral design allows extended contact time, improving product recovery. In this project, deliverables include demonstration of these benefits and construction of the prototype device. Success of the project will be continuously assessed and measured by achievement of deliverables (annex 1), timely progression according to Gantt chart (annex 1) and establishment of good working relationships between project partners to allow maximum exploitation of findings generated. The detailed description of the project activities is provided in Annex 1 along with considerations of potential risk factors and strategies for mitigating them. The project will take place in four work packages (WP). WP1 establishes the relevant physical properties of the target biofilm/media/solvent system that must be known before the design can be finalised. The creation of the new prototype device is the task of WP2, which breaks up into 1) predictive design computations using our existing models 2) detailed design work, including fabrication of parts and component sourcing and 3) assembly, adjustment, protocol development and refining. Data revealing the extent of biofilm reaction and of product extraction, comprising product concentration measurements at the two outlets, are obtained in WP3, where baseline measurements are first obtained for the target biofilm system using the existing research spiral apparatus. Tests of the new device will include both short (hours) and long (days) continuous operation. In WP4 Unilever will be invited to Sheffield to see demonstrations of the prototype.
Collaborator Contribution Unilever are in the process of writing patents to control access to rotating spiral reactor use in the area of Home and Personal Care. We applied for funding to enlarge the scope of application, but budget squeeze at Unilever have held this up. Unilever will encourage one of their suppliers of fragrances (Firmenich, Switzerland) to work with us to produce a commercial machine.
Impact Further funding support and patent coverage are pending.
Start Year 2021
 
Description NBIC POC 03POC20-091 Dry surface biofilms, understanding their formation and development of a test model for preventative surface cleansers. (Simon Rout) 
Organisation Genesis Biosciences
Country United Kingdom 
Sector Private 
PI Contribution An investigation at three hospitals identified the prevalence of multispecies dry biofilms on surfaces. Dry biofilms provide protection from a number of chemical interventions and are known to harbour pathogenic micro-organisms. A probiotic hard surface cleaner designed by Genesis Biosciences reduced surface associated pathogens across multiple hospital trials, which may correlate to dry biofilm removal. To validate this claim there is a need for a fast, robust, representative, analogue for pathogenic colonization of healthcare surfaces. Current model systems are based upon alternating hydration and desiccation phases of growth of Staphylococcus. aureus. The key project aim is to build upon these existing models with respect to both generation and characterisation of dry biofilms to assist with the evaluation of any surface based cleansers. The indicators for success in this project would be the comparison of a number of dry biofilm preparation techniques, using visual and genetic indicators to identify a robust and reproducible method for their preparation and testing of surface cleanser. Gaining a better understanding of the efficacy of a product will aid its development prior to the initiation of hospital scale trial, which will reduce overall time, increase the chances of success and reduce costs. The visual and genetic techniques developed may also provide a mechanistic understanding of Bacillus based cleaners in terms of surface colonization, biological and competitive exclusion mechanisms. These would also be a crucial step in the validation of these products, underpinning their wider acceptance within a Healthcare sector which is increasingly reliant on aggressive hypochlorite based cleansers. From a business perspective, the success of the project would be measured by further investment, increased sales and an acceptance of these products as viable alternatives through comparison with conventional biocidal products using the test methodologies developed.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from the University of Huddersfield: Conclusions: • The prevention of dry biofilms on medically relevant surfaces can be determined using a simple, reproducible testing strategy against Gram positive and negative bacteria, as well as Yeast. • The probiotic cleanser demonstrated efficacy of the prevention of dry biofilm formation on all the tested surface types with initial pathogen loadings of >107CFU (>106 fungi). • CLSM imaging provides a visual demonstration of dry biofilm reduction by the Bacillus blend. • RNA could be extracted from dry biofilms, but the performance of the probiotic cleanser meant that RNA could not be isolated from this testing scheme. • No IP was generated. The development of the method with combined enumeration and visualisation of outcomes represents a technique that can be provided as a consultancy service for the University of Huddersfield Microbial Therapeutics and Infection Control Centre, or which Dr Rout is a member/laboratory manager. Future work: It is expected that the data generated demonstrating the efficacy of the probiotic formula using a simple method to replicate dry biofilm will form part of a publication that will be used for promotional materials for the product. Following the collation and processing of the transcriptional data from the dry biofilms, the genetic mechanisms for dry biofilms formation will form a second publication. The project has allowed for the project team to demonstrate the effectiveness of the probiotic cleanser in its prevention of dry biofilms in addition to having a simple, reproducible method for determining and comparing effectiveness. The outcomes are to be used as justification for a BBSRC responsive mode application to further investigate the potential applications of the probiotic formulation within the healthcare and aligned industries (e.g. dental, veterinary).
Start Year 2020
 
Description NBIC POC 03POC20-091 Dry surface biofilms, understanding their formation and development of a test model for preventative surface cleansers. (Simon Rout) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution An investigation at three hospitals identified the prevalence of multispecies dry biofilms on surfaces. Dry biofilms provide protection from a number of chemical interventions and are known to harbour pathogenic micro-organisms. A probiotic hard surface cleaner designed by Genesis Biosciences reduced surface associated pathogens across multiple hospital trials, which may correlate to dry biofilm removal. To validate this claim there is a need for a fast, robust, representative, analogue for pathogenic colonization of healthcare surfaces. Current model systems are based upon alternating hydration and desiccation phases of growth of Staphylococcus. aureus. The key project aim is to build upon these existing models with respect to both generation and characterisation of dry biofilms to assist with the evaluation of any surface based cleansers. The indicators for success in this project would be the comparison of a number of dry biofilm preparation techniques, using visual and genetic indicators to identify a robust and reproducible method for their preparation and testing of surface cleanser. Gaining a better understanding of the efficacy of a product will aid its development prior to the initiation of hospital scale trial, which will reduce overall time, increase the chances of success and reduce costs. The visual and genetic techniques developed may also provide a mechanistic understanding of Bacillus based cleaners in terms of surface colonization, biological and competitive exclusion mechanisms. These would also be a crucial step in the validation of these products, underpinning their wider acceptance within a Healthcare sector which is increasingly reliant on aggressive hypochlorite based cleansers. From a business perspective, the success of the project would be measured by further investment, increased sales and an acceptance of these products as viable alternatives through comparison with conventional biocidal products using the test methodologies developed.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from the University of Huddersfield: Conclusions: • The prevention of dry biofilms on medically relevant surfaces can be determined using a simple, reproducible testing strategy against Gram positive and negative bacteria, as well as Yeast. • The probiotic cleanser demonstrated efficacy of the prevention of dry biofilm formation on all the tested surface types with initial pathogen loadings of >107CFU (>106 fungi). • CLSM imaging provides a visual demonstration of dry biofilm reduction by the Bacillus blend. • RNA could be extracted from dry biofilms, but the performance of the probiotic cleanser meant that RNA could not be isolated from this testing scheme. • No IP was generated. The development of the method with combined enumeration and visualisation of outcomes represents a technique that can be provided as a consultancy service for the University of Huddersfield Microbial Therapeutics and Infection Control Centre, or which Dr Rout is a member/laboratory manager. Future work: It is expected that the data generated demonstrating the efficacy of the probiotic formula using a simple method to replicate dry biofilm will form part of a publication that will be used for promotional materials for the product. Following the collation and processing of the transcriptional data from the dry biofilms, the genetic mechanisms for dry biofilms formation will form a second publication. The project has allowed for the project team to demonstrate the effectiveness of the probiotic cleanser in its prevention of dry biofilms in addition to having a simple, reproducible method for determining and comparing effectiveness. The outcomes are to be used as justification for a BBSRC responsive mode application to further investigate the potential applications of the probiotic formulation within the healthcare and aligned industries (e.g. dental, veterinary).
Start Year 2020
 
Description NBIC POC 03POC20-091 Dry surface biofilms, understanding their formation and development of a test model for preventative surface cleansers. (Simon Rout) 
Organisation University of Huddersfield
Country United Kingdom 
Sector Academic/University 
PI Contribution An investigation at three hospitals identified the prevalence of multispecies dry biofilms on surfaces. Dry biofilms provide protection from a number of chemical interventions and are known to harbour pathogenic micro-organisms. A probiotic hard surface cleaner designed by Genesis Biosciences reduced surface associated pathogens across multiple hospital trials, which may correlate to dry biofilm removal. To validate this claim there is a need for a fast, robust, representative, analogue for pathogenic colonization of healthcare surfaces. Current model systems are based upon alternating hydration and desiccation phases of growth of Staphylococcus. aureus. The key project aim is to build upon these existing models with respect to both generation and characterisation of dry biofilms to assist with the evaluation of any surface based cleansers. The indicators for success in this project would be the comparison of a number of dry biofilm preparation techniques, using visual and genetic indicators to identify a robust and reproducible method for their preparation and testing of surface cleanser. Gaining a better understanding of the efficacy of a product will aid its development prior to the initiation of hospital scale trial, which will reduce overall time, increase the chances of success and reduce costs. The visual and genetic techniques developed may also provide a mechanistic understanding of Bacillus based cleaners in terms of surface colonization, biological and competitive exclusion mechanisms. These would also be a crucial step in the validation of these products, underpinning their wider acceptance within a Healthcare sector which is increasingly reliant on aggressive hypochlorite based cleansers. From a business perspective, the success of the project would be measured by further investment, increased sales and an acceptance of these products as viable alternatives through comparison with conventional biocidal products using the test methodologies developed.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from the University of Huddersfield: Conclusions: • The prevention of dry biofilms on medically relevant surfaces can be determined using a simple, reproducible testing strategy against Gram positive and negative bacteria, as well as Yeast. • The probiotic cleanser demonstrated efficacy of the prevention of dry biofilm formation on all the tested surface types with initial pathogen loadings of >107CFU (>106 fungi). • CLSM imaging provides a visual demonstration of dry biofilm reduction by the Bacillus blend. • RNA could be extracted from dry biofilms, but the performance of the probiotic cleanser meant that RNA could not be isolated from this testing scheme. • No IP was generated. The development of the method with combined enumeration and visualisation of outcomes represents a technique that can be provided as a consultancy service for the University of Huddersfield Microbial Therapeutics and Infection Control Centre, or which Dr Rout is a member/laboratory manager. Future work: It is expected that the data generated demonstrating the efficacy of the probiotic formula using a simple method to replicate dry biofilm will form part of a publication that will be used for promotional materials for the product. Following the collation and processing of the transcriptional data from the dry biofilms, the genetic mechanisms for dry biofilms formation will form a second publication. The project has allowed for the project team to demonstrate the effectiveness of the probiotic cleanser in its prevention of dry biofilms in addition to having a simple, reproducible method for determining and comparing effectiveness. The outcomes are to be used as justification for a BBSRC responsive mode application to further investigate the potential applications of the probiotic formulation within the healthcare and aligned industries (e.g. dental, veterinary).
Start Year 2020
 
Description NBIC POC 03POC20-097 Manipulation of gut biofilms dynamics for enhanced iodine bioavailability (Emilie Combet) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The project aims at understanding and harnessing the properties of human gut biofilm for utilisation of seaweed products as key novel source of iodine within a complex matrix. Iodine is an essential nutrient, lacking in the British diet. Seaweed is a low-cost, low input sustainable vector, but Iodine bioavailability from seaweed (the fraction the body can extract) is highly variable, person to person. We hypothesise that this variability in bioavailability is a direct consequence of the variability in the host gut biofilm diversity and function (biofilm dynamics). This variability represents a challenge for the industry, in term of accurate labelling for health effects, better understanding of the health potential for the product, a barrier to successful marketing. There is also risk-management strategies required around perception of risk of exposure to excess iodine from seaweed, assuming total 100% bioavailability. In this project we propose: - An IN VITRO PHASE 1 using fermentation models to identify key bacterial (and fungal) species linked to the variability in iodine bioavailability from seaweed. We will also monitor the impact of seaweed iodine on microbial diversity and function under batch culture conditions, in presence and absence of a range of carbon sources (disaccharides, fibres). - An IN VIVO PHASE 2 exploring, in human participants, nutritional strategies to engineer the gut biofilms in vivo, for improved and standardised iodine bioavailability. Specific strategies will involve prebiotic/probiotic exposure to modulate biofilms diversity and functions. The data will directly inform the partner on future product formulation and marketing / labelling strategies.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: Phase 1 • Inulin and Bimuno (a milk-based oligosaccharide prebiotic mix) display similar fermentation profiles whilst potato starch exhibits a delayed fermentative response (based on gas production). • However, Bimuno introduces exogenous iodine, rendering inulin the most suitable prebiotic fibre to carry through to in vivo trials. • We observed few iodine concentration changes in encapsulated seaweed conditions, indicating that iodine may not be released from this seaweed preparation due to its protective plant-protein coating. • Active bacterial metabolism is likely required for digestion of non-encapsulated seaweed and subsequent iodine release from the seaweed matrix. • Despite anticipating iodine concentration increases during the fermentation, we observed iodine concentration decreases. This may be due to either bacterial uptake of iodine (via mechanisms unknown), or loss of iodine into the vial headspace and subsequent degassing. However, further in vitro work is required to confirm these hypotheses. • Alpha diversity in fermentation samples was not affected by the source of iodine (PureSea Protect, PureSea Natural, Potassium iodide). • Alpha diversity values reduced as the fermentation progressed. This may reflect the proliferation of specific bacterial communities driven by the presence of inulin as a fermentable fibre. • Whilst the starting fermentation samples (0h) were clustered, this clustering was lost as the fermentation progressed, instead splitting into smaller clusters, indicating that there is inter-individual variability in participant responses to inulin. Phase 2 - in a group of euthyroid participants (n=25). • A two-week inulin intervention (12g/day) was well tolerated and had no effect on anthropometric aspects (weight, waist circumference, blood pressure). We observed minor changes in gastrointestinal symptoms, namely decreased post-prandial fullness and increased flatulence. • Iodine bioavailability from powdered Ascophyllum nodosum seaweed is approximately 50%. • Median iodine bioavailability did not change as a result of the inulin intervention. However, when participants were grouped according to whether they increased or decreased iodine bioavailability after the intervention, iodine bioavailability results were mirrored (Increasers: 43% pre, 62% post; Decreasers: 63% pre, 46% post). • We did not observe a relationship between fibre-rich food consumption frequency and iodine bioavailability from seaweed. • The inulin intervention did not induce changes in gut microbiota diversity indices but did have a Bifidogenic effect in the majority of participants. • According to LEfSe analysis, Methanobacteria, Catenibacterium, and Clostridia were pre-intervention biomarker taxa of those that increased iodine bioavailability, whilst Veillonellaceae and Dialister were pre-intervention biomarker taxa of those that decreased iodine bioavailability. Know-how: Through the course of the project, we have developed further our protocols for the measurement of iodine in complex liquid matrices containing faecal samples and fibres - this know-how will be described in the publication linked to this project. The project is anticipated to generate important novel insight on the role of prebiotics / fibre on the bioaccessibility / bioavailability of iodine from seaweed - this new knowledge is of commercial importance for the industry partner, since it can be used as evidence for the formulation of an improved seaweed product for the delivery of iodine less subject to interindividual variability. At present, potential lines of interest include supplement formulations including a fibre source as well as a seaweed as iodine source. Next steps Publication (either two separate manuscripts or a single publication grouping the intervention and in vitro work). Development of dissemination material focusing on the study findings, specifically on how bioavailability of iodine varies following seaweed intake. Development of a brief for internal use with the industry collaborator to 1) seek further funding (aim: BBSRC, InnovateUK), 2) develop a PhD proposal. Of particular interest is the potential to combine iodine and fibre source in a supplement and the dual impact on the microbiome. The large inter-individual variability observed also opens up opportunities to explore avenues for personalised nutrition.
Start Year 2021
 
Description NBIC POC 03POC20-097 Manipulation of gut biofilms dynamics for enhanced iodine bioavailability (Emilie Combet) 
Organisation Seaweed and Co
Country United Kingdom 
Sector Private 
PI Contribution The project aims at understanding and harnessing the properties of human gut biofilm for utilisation of seaweed products as key novel source of iodine within a complex matrix. Iodine is an essential nutrient, lacking in the British diet. Seaweed is a low-cost, low input sustainable vector, but Iodine bioavailability from seaweed (the fraction the body can extract) is highly variable, person to person. We hypothesise that this variability in bioavailability is a direct consequence of the variability in the host gut biofilm diversity and function (biofilm dynamics). This variability represents a challenge for the industry, in term of accurate labelling for health effects, better understanding of the health potential for the product, a barrier to successful marketing. There is also risk-management strategies required around perception of risk of exposure to excess iodine from seaweed, assuming total 100% bioavailability. In this project we propose: - An IN VITRO PHASE 1 using fermentation models to identify key bacterial (and fungal) species linked to the variability in iodine bioavailability from seaweed. We will also monitor the impact of seaweed iodine on microbial diversity and function under batch culture conditions, in presence and absence of a range of carbon sources (disaccharides, fibres). - An IN VIVO PHASE 2 exploring, in human participants, nutritional strategies to engineer the gut biofilms in vivo, for improved and standardised iodine bioavailability. Specific strategies will involve prebiotic/probiotic exposure to modulate biofilms diversity and functions. The data will directly inform the partner on future product formulation and marketing / labelling strategies.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: Phase 1 • Inulin and Bimuno (a milk-based oligosaccharide prebiotic mix) display similar fermentation profiles whilst potato starch exhibits a delayed fermentative response (based on gas production). • However, Bimuno introduces exogenous iodine, rendering inulin the most suitable prebiotic fibre to carry through to in vivo trials. • We observed few iodine concentration changes in encapsulated seaweed conditions, indicating that iodine may not be released from this seaweed preparation due to its protective plant-protein coating. • Active bacterial metabolism is likely required for digestion of non-encapsulated seaweed and subsequent iodine release from the seaweed matrix. • Despite anticipating iodine concentration increases during the fermentation, we observed iodine concentration decreases. This may be due to either bacterial uptake of iodine (via mechanisms unknown), or loss of iodine into the vial headspace and subsequent degassing. However, further in vitro work is required to confirm these hypotheses. • Alpha diversity in fermentation samples was not affected by the source of iodine (PureSea Protect, PureSea Natural, Potassium iodide). • Alpha diversity values reduced as the fermentation progressed. This may reflect the proliferation of specific bacterial communities driven by the presence of inulin as a fermentable fibre. • Whilst the starting fermentation samples (0h) were clustered, this clustering was lost as the fermentation progressed, instead splitting into smaller clusters, indicating that there is inter-individual variability in participant responses to inulin. Phase 2 - in a group of euthyroid participants (n=25). • A two-week inulin intervention (12g/day) was well tolerated and had no effect on anthropometric aspects (weight, waist circumference, blood pressure). We observed minor changes in gastrointestinal symptoms, namely decreased post-prandial fullness and increased flatulence. • Iodine bioavailability from powdered Ascophyllum nodosum seaweed is approximately 50%. • Median iodine bioavailability did not change as a result of the inulin intervention. However, when participants were grouped according to whether they increased or decreased iodine bioavailability after the intervention, iodine bioavailability results were mirrored (Increasers: 43% pre, 62% post; Decreasers: 63% pre, 46% post). • We did not observe a relationship between fibre-rich food consumption frequency and iodine bioavailability from seaweed. • The inulin intervention did not induce changes in gut microbiota diversity indices but did have a Bifidogenic effect in the majority of participants. • According to LEfSe analysis, Methanobacteria, Catenibacterium, and Clostridia were pre-intervention biomarker taxa of those that increased iodine bioavailability, whilst Veillonellaceae and Dialister were pre-intervention biomarker taxa of those that decreased iodine bioavailability. Know-how: Through the course of the project, we have developed further our protocols for the measurement of iodine in complex liquid matrices containing faecal samples and fibres - this know-how will be described in the publication linked to this project. The project is anticipated to generate important novel insight on the role of prebiotics / fibre on the bioaccessibility / bioavailability of iodine from seaweed - this new knowledge is of commercial importance for the industry partner, since it can be used as evidence for the formulation of an improved seaweed product for the delivery of iodine less subject to interindividual variability. At present, potential lines of interest include supplement formulations including a fibre source as well as a seaweed as iodine source. Next steps Publication (either two separate manuscripts or a single publication grouping the intervention and in vitro work). Development of dissemination material focusing on the study findings, specifically on how bioavailability of iodine varies following seaweed intake. Development of a brief for internal use with the industry collaborator to 1) seek further funding (aim: BBSRC, InnovateUK), 2) develop a PhD proposal. Of particular interest is the potential to combine iodine and fibre source in a supplement and the dual impact on the microbiome. The large inter-individual variability observed also opens up opportunities to explore avenues for personalised nutrition.
Start Year 2021
 
Description NBIC POC 03POC20-097 Manipulation of gut biofilms dynamics for enhanced iodine bioavailability (Emilie Combet) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution The project aims at understanding and harnessing the properties of human gut biofilm for utilisation of seaweed products as key novel source of iodine within a complex matrix. Iodine is an essential nutrient, lacking in the British diet. Seaweed is a low-cost, low input sustainable vector, but Iodine bioavailability from seaweed (the fraction the body can extract) is highly variable, person to person. We hypothesise that this variability in bioavailability is a direct consequence of the variability in the host gut biofilm diversity and function (biofilm dynamics). This variability represents a challenge for the industry, in term of accurate labelling for health effects, better understanding of the health potential for the product, a barrier to successful marketing. There is also risk-management strategies required around perception of risk of exposure to excess iodine from seaweed, assuming total 100% bioavailability. In this project we propose: - An IN VITRO PHASE 1 using fermentation models to identify key bacterial (and fungal) species linked to the variability in iodine bioavailability from seaweed. We will also monitor the impact of seaweed iodine on microbial diversity and function under batch culture conditions, in presence and absence of a range of carbon sources (disaccharides, fibres). - An IN VIVO PHASE 2 exploring, in human participants, nutritional strategies to engineer the gut biofilms in vivo, for improved and standardised iodine bioavailability. Specific strategies will involve prebiotic/probiotic exposure to modulate biofilms diversity and functions. The data will directly inform the partner on future product formulation and marketing / labelling strategies.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: Phase 1 • Inulin and Bimuno (a milk-based oligosaccharide prebiotic mix) display similar fermentation profiles whilst potato starch exhibits a delayed fermentative response (based on gas production). • However, Bimuno introduces exogenous iodine, rendering inulin the most suitable prebiotic fibre to carry through to in vivo trials. • We observed few iodine concentration changes in encapsulated seaweed conditions, indicating that iodine may not be released from this seaweed preparation due to its protective plant-protein coating. • Active bacterial metabolism is likely required for digestion of non-encapsulated seaweed and subsequent iodine release from the seaweed matrix. • Despite anticipating iodine concentration increases during the fermentation, we observed iodine concentration decreases. This may be due to either bacterial uptake of iodine (via mechanisms unknown), or loss of iodine into the vial headspace and subsequent degassing. However, further in vitro work is required to confirm these hypotheses. • Alpha diversity in fermentation samples was not affected by the source of iodine (PureSea Protect, PureSea Natural, Potassium iodide). • Alpha diversity values reduced as the fermentation progressed. This may reflect the proliferation of specific bacterial communities driven by the presence of inulin as a fermentable fibre. • Whilst the starting fermentation samples (0h) were clustered, this clustering was lost as the fermentation progressed, instead splitting into smaller clusters, indicating that there is inter-individual variability in participant responses to inulin. Phase 2 - in a group of euthyroid participants (n=25). • A two-week inulin intervention (12g/day) was well tolerated and had no effect on anthropometric aspects (weight, waist circumference, blood pressure). We observed minor changes in gastrointestinal symptoms, namely decreased post-prandial fullness and increased flatulence. • Iodine bioavailability from powdered Ascophyllum nodosum seaweed is approximately 50%. • Median iodine bioavailability did not change as a result of the inulin intervention. However, when participants were grouped according to whether they increased or decreased iodine bioavailability after the intervention, iodine bioavailability results were mirrored (Increasers: 43% pre, 62% post; Decreasers: 63% pre, 46% post). • We did not observe a relationship between fibre-rich food consumption frequency and iodine bioavailability from seaweed. • The inulin intervention did not induce changes in gut microbiota diversity indices but did have a Bifidogenic effect in the majority of participants. • According to LEfSe analysis, Methanobacteria, Catenibacterium, and Clostridia were pre-intervention biomarker taxa of those that increased iodine bioavailability, whilst Veillonellaceae and Dialister were pre-intervention biomarker taxa of those that decreased iodine bioavailability. Know-how: Through the course of the project, we have developed further our protocols for the measurement of iodine in complex liquid matrices containing faecal samples and fibres - this know-how will be described in the publication linked to this project. The project is anticipated to generate important novel insight on the role of prebiotics / fibre on the bioaccessibility / bioavailability of iodine from seaweed - this new knowledge is of commercial importance for the industry partner, since it can be used as evidence for the formulation of an improved seaweed product for the delivery of iodine less subject to interindividual variability. At present, potential lines of interest include supplement formulations including a fibre source as well as a seaweed as iodine source. Next steps Publication (either two separate manuscripts or a single publication grouping the intervention and in vitro work). Development of dissemination material focusing on the study findings, specifically on how bioavailability of iodine varies following seaweed intake. Development of a brief for internal use with the industry collaborator to 1) seek further funding (aim: BBSRC, InnovateUK), 2) develop a PhD proposal. Of particular interest is the potential to combine iodine and fibre source in a supplement and the dual impact on the microbiome. The large inter-individual variability observed also opens up opportunities to explore avenues for personalised nutrition.
Start Year 2021
 
Description NBIC POC 03POC20-105 DNA origami nanostructures as a tool in the disruption of P. gingivalis biofilms. (Ioanna Mela) 
Organisation Frontier IP Group plc
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution We are aiming to design and produce DNA nanostructures that can penetrate biofilms, specifically bind bacteria and deliver active payloads (such as antimicrobial enzymes or proteins). We will use this delivery vehicle to increase the efficacy of the antibacterial components against their targets, and specifically against the gram-negative bacterium P.gingivalis in biofilms. Our primary measure of success for this aim is by monitoring the growth of biofilm with and without the presence of the functionalised DNA nanostructures using microscopy live/dead assays. We will optimise our DNA structure by building on our prior results of using the antimicrobial enzyme lysozyme to slow the growth of gram-negative (E. coli) and gram-positive (B. subtilis) bacteria. Optimisation will involve designing and testing different 3D geometries of the DNA nanostructure for penetration of the biofilm. We will also optimise the binding mechanism of the DNA origami to the bacteria (short oligonucleotides called aptamers) and identify the highest performing ones for effective attachment to the bacterial targets. We will use light sheet microscopy to achieve 3D visualisation of the biofilms and to quantify the penetration of the DNA nanostructures and structured illumination microscopy to quantify the efficiency of the aptamers binding. Those findings will inform future work. Our secondary measure of success is to identify at least one product profile for which the DNA structure has the potential to be developed, with industrial partners and users, to meet the requirements. By exploring potential product formats for a commercial antibacterial based on DNA nanostructures we will identify target product requirements such as shelf life, required lifetime of structure in human fluids, biocompatibility, compatibility with delivery device, and treatment duration. Potential industry partners, users and their high-level stakeholder needs will be identified, then compared with the potential DNA nanostructure performance to see if there is a good match.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The project aimed to design and synthesise DNA nanostructures with the potential to penetrate biofilms and specifically bind to bacterial targets, while carrying active antimicrobials. The bacterial target selected in this project was the gram-negative bacterium P. gingivalis in biofilms, which is an anaerobic oral pathogen. We designed ten different nanostructures of which we synthesised three. The nanostructures were functionalised with aptamers that would act as the "anchoring" mechanism on the bacterial targets and loaded with three different antimicrobials: two proteins and one peptide. The results generated show that the efficacy of the antimicrobials was not increased by targeted delivery through the nanostructures. Troubleshooting experiments revealed that the most likely cause of the lack of potentiation of the antimicrobials is the limited binding of the nanostructures on the P. gingivalis targets. Optimisation of the aptamer sequences is therefore a crucial next step. Following extensive desk research and discussion, seven product formats were generated and then three selected. A product profile based on the original intent of a periodontitis therapeutic was created as were four further profiles for consumer and dental professional products. Following discussions with two potential international industrial partners at senior management level, and five dental/clinical professionals, refined profiles for the periodontitis therapeutic, a consumer product and a dental professional product were evolved. The current plan is to take all three profiles forward. There are two main options being considered for next steps. Frontier IP and Dr Ioanna Mela (University of Cambridge) will investigate the viability of both options in the next two months, with an initial meeting planned for January. In summary, the options are: Option 1 - Frontier IP and Dr Mela to apply for further grant funding, after Dr Mela has gained a permanent post. Option 2 - To create a start-up with Dr Mela as a founder member and ongoing adviser, and Frontier IP as a founder member. Frontier IP to raise funding. Resources permitting, we aim to carry out some further work in Q1 2022 to investigate the hypotheses that DNA nanostructures have a limited lifetime in the biofilm environment and/or the possible limited interaction of the nanostructures with the bacteria due to poor binding of the aptamers.
Start Year 2021
 
Description NBIC POC 03POC20-105 DNA origami nanostructures as a tool in the disruption of P. gingivalis biofilms. (Ioanna Mela) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution We are aiming to design and produce DNA nanostructures that can penetrate biofilms, specifically bind bacteria and deliver active payloads (such as antimicrobial enzymes or proteins). We will use this delivery vehicle to increase the efficacy of the antibacterial components against their targets, and specifically against the gram-negative bacterium P.gingivalis in biofilms. Our primary measure of success for this aim is by monitoring the growth of biofilm with and without the presence of the functionalised DNA nanostructures using microscopy live/dead assays. We will optimise our DNA structure by building on our prior results of using the antimicrobial enzyme lysozyme to slow the growth of gram-negative (E. coli) and gram-positive (B. subtilis) bacteria. Optimisation will involve designing and testing different 3D geometries of the DNA nanostructure for penetration of the biofilm. We will also optimise the binding mechanism of the DNA origami to the bacteria (short oligonucleotides called aptamers) and identify the highest performing ones for effective attachment to the bacterial targets. We will use light sheet microscopy to achieve 3D visualisation of the biofilms and to quantify the penetration of the DNA nanostructures and structured illumination microscopy to quantify the efficiency of the aptamers binding. Those findings will inform future work. Our secondary measure of success is to identify at least one product profile for which the DNA structure has the potential to be developed, with industrial partners and users, to meet the requirements. By exploring potential product formats for a commercial antibacterial based on DNA nanostructures we will identify target product requirements such as shelf life, required lifetime of structure in human fluids, biocompatibility, compatibility with delivery device, and treatment duration. Potential industry partners, users and their high-level stakeholder needs will be identified, then compared with the potential DNA nanostructure performance to see if there is a good match.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The project aimed to design and synthesise DNA nanostructures with the potential to penetrate biofilms and specifically bind to bacterial targets, while carrying active antimicrobials. The bacterial target selected in this project was the gram-negative bacterium P. gingivalis in biofilms, which is an anaerobic oral pathogen. We designed ten different nanostructures of which we synthesised three. The nanostructures were functionalised with aptamers that would act as the "anchoring" mechanism on the bacterial targets and loaded with three different antimicrobials: two proteins and one peptide. The results generated show that the efficacy of the antimicrobials was not increased by targeted delivery through the nanostructures. Troubleshooting experiments revealed that the most likely cause of the lack of potentiation of the antimicrobials is the limited binding of the nanostructures on the P. gingivalis targets. Optimisation of the aptamer sequences is therefore a crucial next step. Following extensive desk research and discussion, seven product formats were generated and then three selected. A product profile based on the original intent of a periodontitis therapeutic was created as were four further profiles for consumer and dental professional products. Following discussions with two potential international industrial partners at senior management level, and five dental/clinical professionals, refined profiles for the periodontitis therapeutic, a consumer product and a dental professional product were evolved. The current plan is to take all three profiles forward. There are two main options being considered for next steps. Frontier IP and Dr Ioanna Mela (University of Cambridge) will investigate the viability of both options in the next two months, with an initial meeting planned for January. In summary, the options are: Option 1 - Frontier IP and Dr Mela to apply for further grant funding, after Dr Mela has gained a permanent post. Option 2 - To create a start-up with Dr Mela as a founder member and ongoing adviser, and Frontier IP as a founder member. Frontier IP to raise funding. Resources permitting, we aim to carry out some further work in Q1 2022 to investigate the hypotheses that DNA nanostructures have a limited lifetime in the biofilm environment and/or the possible limited interaction of the nanostructures with the bacteria due to poor binding of the aptamers.
Start Year 2021
 
Description NBIC POC 03POC20-105 DNA origami nanostructures as a tool in the disruption of P. gingivalis biofilms. (Ioanna Mela) 
Organisation University of Cambridge
Country United Kingdom 
Sector Academic/University 
PI Contribution We are aiming to design and produce DNA nanostructures that can penetrate biofilms, specifically bind bacteria and deliver active payloads (such as antimicrobial enzymes or proteins). We will use this delivery vehicle to increase the efficacy of the antibacterial components against their targets, and specifically against the gram-negative bacterium P.gingivalis in biofilms. Our primary measure of success for this aim is by monitoring the growth of biofilm with and without the presence of the functionalised DNA nanostructures using microscopy live/dead assays. We will optimise our DNA structure by building on our prior results of using the antimicrobial enzyme lysozyme to slow the growth of gram-negative (E. coli) and gram-positive (B. subtilis) bacteria. Optimisation will involve designing and testing different 3D geometries of the DNA nanostructure for penetration of the biofilm. We will also optimise the binding mechanism of the DNA origami to the bacteria (short oligonucleotides called aptamers) and identify the highest performing ones for effective attachment to the bacterial targets. We will use light sheet microscopy to achieve 3D visualisation of the biofilms and to quantify the penetration of the DNA nanostructures and structured illumination microscopy to quantify the efficiency of the aptamers binding. Those findings will inform future work. Our secondary measure of success is to identify at least one product profile for which the DNA structure has the potential to be developed, with industrial partners and users, to meet the requirements. By exploring potential product formats for a commercial antibacterial based on DNA nanostructures we will identify target product requirements such as shelf life, required lifetime of structure in human fluids, biocompatibility, compatibility with delivery device, and treatment duration. Potential industry partners, users and their high-level stakeholder needs will be identified, then compared with the potential DNA nanostructure performance to see if there is a good match.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The project aimed to design and synthesise DNA nanostructures with the potential to penetrate biofilms and specifically bind to bacterial targets, while carrying active antimicrobials. The bacterial target selected in this project was the gram-negative bacterium P. gingivalis in biofilms, which is an anaerobic oral pathogen. We designed ten different nanostructures of which we synthesised three. The nanostructures were functionalised with aptamers that would act as the "anchoring" mechanism on the bacterial targets and loaded with three different antimicrobials: two proteins and one peptide. The results generated show that the efficacy of the antimicrobials was not increased by targeted delivery through the nanostructures. Troubleshooting experiments revealed that the most likely cause of the lack of potentiation of the antimicrobials is the limited binding of the nanostructures on the P. gingivalis targets. Optimisation of the aptamer sequences is therefore a crucial next step. Following extensive desk research and discussion, seven product formats were generated and then three selected. A product profile based on the original intent of a periodontitis therapeutic was created as were four further profiles for consumer and dental professional products. Following discussions with two potential international industrial partners at senior management level, and five dental/clinical professionals, refined profiles for the periodontitis therapeutic, a consumer product and a dental professional product were evolved. The current plan is to take all three profiles forward. There are two main options being considered for next steps. Frontier IP and Dr Ioanna Mela (University of Cambridge) will investigate the viability of both options in the next two months, with an initial meeting planned for January. In summary, the options are: Option 1 - Frontier IP and Dr Mela to apply for further grant funding, after Dr Mela has gained a permanent post. Option 2 - To create a start-up with Dr Mela as a founder member and ongoing adviser, and Frontier IP as a founder member. Frontier IP to raise funding. Resources permitting, we aim to carry out some further work in Q1 2022 to investigate the hypotheses that DNA nanostructures have a limited lifetime in the biofilm environment and/or the possible limited interaction of the nanostructures with the bacteria due to poor binding of the aptamers.
Start Year 2021
 
Description NBIC POC 03POC20-140 To incorporate a quorum sensing blocker (lactams) into wound dressing platforms to control biofilms (Joanne O'Keeffe/Daimark Bennett) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution The overall concept of this project is to develop a wound dressing (hydrogel) prototype combined with a 'game changing' quorum sensing (QS) blocking agent. The project will have three interlinked objectives: 1. Develop a low-cost and safe antibiofilm/QS blocking 'proof of concept' prototype wound dressing. 2. To optimise the performance of the antibiofilm technology based on lactam chemistry of the wound dressing i.e. ensure elution of the active agent is both sustained and maintained. 3. Evaluate the prototype wound dressing (hydrogel) under both ASTM based biofilm models and also in realistic wound care conditions to produce a 'proof of concept' medical device. Successful completion of the primary objectives will result in an initial prototype device that showcases the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost 'game changing' antibiofilm and QS blocking wound dressing. The dressing will aim to administer a dose of lactams (QS blocker) as and when is required with the aim to potentially also down-regulate other variables known to delay wound healing e.g. inflammation. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. A key feature of this novel antibiofilm system is the combined use of an advanced wound dressing and a QS blocking agent, providing a synergistic effect to manage the microflora within the wound bed, ultimately influencing the microbiome within the wound itself leading to enhanced wound healing.
Collaborator Contribution University of Liverpool: We are providing functional characterisation of textile-microbe interactions using optical imaging. Visualisation of microbial communities on wound dressings.
Impact Feedback from industrial partner: The general aim of this proof of concept of study was to develop and evaluate wound dressings utilising a novel quorum sensing (QS) blocking agent. The novel anti-fouling technologies (lactam) was successfully incorporated into a number of wound platforms, some of which already had compounds present which are claimed to affect biofilms and/ or help in wound healing (reduce inflammation). Proof of principle of efficacy (in vitro) was demonstrated, against two key biofilm - forming bacteria present in wounds, which allowed for the selection prototypes we are proposing to develop further. Not only did we demonstrate efficacy from the lactams alone, we also observed boosted effects when in combination with other technologies used to treat wound biofilms. Imaging techniques used to support the in vitro efficacy assessment provided us with mechanistic insights as to the mode of action and clearly supported the positive data obtained. We will be investigating the leaching/ release properties of the lactams to obtain further mechanistic insights and help scope potential in-use applications further. We intend to publish and are currently scoping ways to jointly develop the technology for commercial use. MAIN OUTPUTS: • Ease of lactam incorporation into wound dressings and the generation of prototypes. • Efficacy testing using accepted ASTM methodology with demonstration of significant positive performance of the lactam technology - either alone or in combination, including with those technologies currently and (and are not yet) commercially available. • Less cytotoxic effects than current market lead against L929 cells. • Development of imaging protocols and analysis tools used to support the log count results, allowing greater confidence in the results and a method by which we can begin to strengthen our mechanistic understanding. Future work: We are hopeful we will continue the industrial collaboration to ensure joint development of the technology (where applicable) to optimise the potential product offerings. We will be publishing the work and may continue to generate experimental data to support that activity. We are scoping ways to fund future optimisation work and move the technology readiness level from TRL 6-7 towards 8-9. Key focus will likely be in optimising the formulations(s), understanding the regulatory requirements, and scoping potential routes to market.
Start Year 2021
 
Description NBIC POC 03POC20-140 To incorporate a quorum sensing blocker (lactams) into wound dressing platforms to control biofilms (Joanne O'Keeffe/Daimark Bennett) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall concept of this project is to develop a wound dressing (hydrogel) prototype combined with a 'game changing' quorum sensing (QS) blocking agent. The project will have three interlinked objectives: 1. Develop a low-cost and safe antibiofilm/QS blocking 'proof of concept' prototype wound dressing. 2. To optimise the performance of the antibiofilm technology based on lactam chemistry of the wound dressing i.e. ensure elution of the active agent is both sustained and maintained. 3. Evaluate the prototype wound dressing (hydrogel) under both ASTM based biofilm models and also in realistic wound care conditions to produce a 'proof of concept' medical device. Successful completion of the primary objectives will result in an initial prototype device that showcases the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost 'game changing' antibiofilm and QS blocking wound dressing. The dressing will aim to administer a dose of lactams (QS blocker) as and when is required with the aim to potentially also down-regulate other variables known to delay wound healing e.g. inflammation. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. A key feature of this novel antibiofilm system is the combined use of an advanced wound dressing and a QS blocking agent, providing a synergistic effect to manage the microflora within the wound bed, ultimately influencing the microbiome within the wound itself leading to enhanced wound healing.
Collaborator Contribution University of Liverpool: We are providing functional characterisation of textile-microbe interactions using optical imaging. Visualisation of microbial communities on wound dressings.
Impact Feedback from industrial partner: The general aim of this proof of concept of study was to develop and evaluate wound dressings utilising a novel quorum sensing (QS) blocking agent. The novel anti-fouling technologies (lactam) was successfully incorporated into a number of wound platforms, some of which already had compounds present which are claimed to affect biofilms and/ or help in wound healing (reduce inflammation). Proof of principle of efficacy (in vitro) was demonstrated, against two key biofilm - forming bacteria present in wounds, which allowed for the selection prototypes we are proposing to develop further. Not only did we demonstrate efficacy from the lactams alone, we also observed boosted effects when in combination with other technologies used to treat wound biofilms. Imaging techniques used to support the in vitro efficacy assessment provided us with mechanistic insights as to the mode of action and clearly supported the positive data obtained. We will be investigating the leaching/ release properties of the lactams to obtain further mechanistic insights and help scope potential in-use applications further. We intend to publish and are currently scoping ways to jointly develop the technology for commercial use. MAIN OUTPUTS: • Ease of lactam incorporation into wound dressings and the generation of prototypes. • Efficacy testing using accepted ASTM methodology with demonstration of significant positive performance of the lactam technology - either alone or in combination, including with those technologies currently and (and are not yet) commercially available. • Less cytotoxic effects than current market lead against L929 cells. • Development of imaging protocols and analysis tools used to support the log count results, allowing greater confidence in the results and a method by which we can begin to strengthen our mechanistic understanding. Future work: We are hopeful we will continue the industrial collaboration to ensure joint development of the technology (where applicable) to optimise the potential product offerings. We will be publishing the work and may continue to generate experimental data to support that activity. We are scoping ways to fund future optimisation work and move the technology readiness level from TRL 6-7 towards 8-9. Key focus will likely be in optimising the formulations(s), understanding the regulatory requirements, and scoping potential routes to market.
Start Year 2021
 
Description NBIC POC 03POC20-140 To incorporate a quorum sensing blocker (lactams) into wound dressing platforms to control biofilms (Joanne O'Keeffe/Daimark Bennett) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution The overall concept of this project is to develop a wound dressing (hydrogel) prototype combined with a 'game changing' quorum sensing (QS) blocking agent. The project will have three interlinked objectives: 1. Develop a low-cost and safe antibiofilm/QS blocking 'proof of concept' prototype wound dressing. 2. To optimise the performance of the antibiofilm technology based on lactam chemistry of the wound dressing i.e. ensure elution of the active agent is both sustained and maintained. 3. Evaluate the prototype wound dressing (hydrogel) under both ASTM based biofilm models and also in realistic wound care conditions to produce a 'proof of concept' medical device. Successful completion of the primary objectives will result in an initial prototype device that showcases the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost 'game changing' antibiofilm and QS blocking wound dressing. The dressing will aim to administer a dose of lactams (QS blocker) as and when is required with the aim to potentially also down-regulate other variables known to delay wound healing e.g. inflammation. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. A key feature of this novel antibiofilm system is the combined use of an advanced wound dressing and a QS blocking agent, providing a synergistic effect to manage the microflora within the wound bed, ultimately influencing the microbiome within the wound itself leading to enhanced wound healing.
Collaborator Contribution University of Liverpool: We are providing functional characterisation of textile-microbe interactions using optical imaging. Visualisation of microbial communities on wound dressings.
Impact Feedback from industrial partner: The general aim of this proof of concept of study was to develop and evaluate wound dressings utilising a novel quorum sensing (QS) blocking agent. The novel anti-fouling technologies (lactam) was successfully incorporated into a number of wound platforms, some of which already had compounds present which are claimed to affect biofilms and/ or help in wound healing (reduce inflammation). Proof of principle of efficacy (in vitro) was demonstrated, against two key biofilm - forming bacteria present in wounds, which allowed for the selection prototypes we are proposing to develop further. Not only did we demonstrate efficacy from the lactams alone, we also observed boosted effects when in combination with other technologies used to treat wound biofilms. Imaging techniques used to support the in vitro efficacy assessment provided us with mechanistic insights as to the mode of action and clearly supported the positive data obtained. We will be investigating the leaching/ release properties of the lactams to obtain further mechanistic insights and help scope potential in-use applications further. We intend to publish and are currently scoping ways to jointly develop the technology for commercial use. MAIN OUTPUTS: • Ease of lactam incorporation into wound dressings and the generation of prototypes. • Efficacy testing using accepted ASTM methodology with demonstration of significant positive performance of the lactam technology - either alone or in combination, including with those technologies currently and (and are not yet) commercially available. • Less cytotoxic effects than current market lead against L929 cells. • Development of imaging protocols and analysis tools used to support the log count results, allowing greater confidence in the results and a method by which we can begin to strengthen our mechanistic understanding. Future work: We are hopeful we will continue the industrial collaboration to ensure joint development of the technology (where applicable) to optimise the potential product offerings. We will be publishing the work and may continue to generate experimental data to support that activity. We are scoping ways to fund future optimisation work and move the technology readiness level from TRL 6-7 towards 8-9. Key focus will likely be in optimising the formulations(s), understanding the regulatory requirements, and scoping potential routes to market.
Start Year 2021
 
Description NBIC POC 03POC20-140 To incorporate a quorum sensing blocker (lactams) into wound dressing platforms to control biofilms (Joanne O'Keeffe/Daimark Bennett) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall concept of this project is to develop a wound dressing (hydrogel) prototype combined with a 'game changing' quorum sensing (QS) blocking agent. The project will have three interlinked objectives: 1. Develop a low-cost and safe antibiofilm/QS blocking 'proof of concept' prototype wound dressing. 2. To optimise the performance of the antibiofilm technology based on lactam chemistry of the wound dressing i.e. ensure elution of the active agent is both sustained and maintained. 3. Evaluate the prototype wound dressing (hydrogel) under both ASTM based biofilm models and also in realistic wound care conditions to produce a 'proof of concept' medical device. Successful completion of the primary objectives will result in an initial prototype device that showcases the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost 'game changing' antibiofilm and QS blocking wound dressing. The dressing will aim to administer a dose of lactams (QS blocker) as and when is required with the aim to potentially also down-regulate other variables known to delay wound healing e.g. inflammation. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. A key feature of this novel antibiofilm system is the combined use of an advanced wound dressing and a QS blocking agent, providing a synergistic effect to manage the microflora within the wound bed, ultimately influencing the microbiome within the wound itself leading to enhanced wound healing.
Collaborator Contribution University of Liverpool: We are providing functional characterisation of textile-microbe interactions using optical imaging. Visualisation of microbial communities on wound dressings.
Impact Feedback from industrial partner: The general aim of this proof of concept of study was to develop and evaluate wound dressings utilising a novel quorum sensing (QS) blocking agent. The novel anti-fouling technologies (lactam) was successfully incorporated into a number of wound platforms, some of which already had compounds present which are claimed to affect biofilms and/ or help in wound healing (reduce inflammation). Proof of principle of efficacy (in vitro) was demonstrated, against two key biofilm - forming bacteria present in wounds, which allowed for the selection prototypes we are proposing to develop further. Not only did we demonstrate efficacy from the lactams alone, we also observed boosted effects when in combination with other technologies used to treat wound biofilms. Imaging techniques used to support the in vitro efficacy assessment provided us with mechanistic insights as to the mode of action and clearly supported the positive data obtained. We will be investigating the leaching/ release properties of the lactams to obtain further mechanistic insights and help scope potential in-use applications further. We intend to publish and are currently scoping ways to jointly develop the technology for commercial use. MAIN OUTPUTS: • Ease of lactam incorporation into wound dressings and the generation of prototypes. • Efficacy testing using accepted ASTM methodology with demonstration of significant positive performance of the lactam technology - either alone or in combination, including with those technologies currently and (and are not yet) commercially available. • Less cytotoxic effects than current market lead against L929 cells. • Development of imaging protocols and analysis tools used to support the log count results, allowing greater confidence in the results and a method by which we can begin to strengthen our mechanistic understanding. Future work: We are hopeful we will continue the industrial collaboration to ensure joint development of the technology (where applicable) to optimise the potential product offerings. We will be publishing the work and may continue to generate experimental data to support that activity. We are scoping ways to fund future optimisation work and move the technology readiness level from TRL 6-7 towards 8-9. Key focus will likely be in optimising the formulations(s), understanding the regulatory requirements, and scoping potential routes to market.
Start Year 2021
 
Description NBIC POC 03POC20-150 Biofilm disruption activity of absorbent sustained action alginate and iodine combined wound dressings (Manuel Romero) 
Organisation Io-Cyte
Country United Kingdom 
Sector Private 
PI Contribution Io-Cyte Ltd (www.io-cyte.co.uk) is an SME (spun out from Xiros Ltd) engaged in the development of a novel alginate and iodine combined absorbent sustained-action wound dressings, which has demonstrated high efficacy against single-species biofilms (CDC Bioreactor model). With this proposal, Io-Cyte wishes to build additional confidence in this new dressing concept using more challenging and clinically relevant biofilm models. These will comprise a complex inter-kingdom polymicrobial biofilm model that has shown high levels of tolerance to commercial wound formulations (including antimicrobials like silver salts) in previous tests carried out at the University of Nottingham, and an ex vivo porcine skin infection model optimised for wound therapeutic testing in the University of Southampton. The overall aim of the project is therefore, to aid in the optimisation of a novel antimicrobial wound dressing and to provide strong supporting evidence for the effectiveness of the dressing against biofilms. The key goals are as follows: Determine whether the Io-Cyte technology is effective against polymicrobial biofilms; Determine if the products work in very different biofilm models (abiotic and biotic surfaces); Collaboratively identify the most effective formulation against biofilms which can be taken forward for further development. Success will be measured based on the outcomes from the different biofilm models and the ability to use the results and knowledge gained to drive product development. A second measure of success will relate to selection of an appropriate loading of the active agent to be effective against biofilms in the models used.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Three povidone-iodine (PVPI)-containing dressings provided by Io-Cyte were tested against polymicrobial biofilms including the wound relevant pathogens: Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. Despite no significant reduction in colony forming units (CFU) counts for all microbial species were recorded, confocal microscopy analysis showed that PVPI releasing dressings cause a reduction in biofilm viability in a non-uniform way. The same dressings were tested against single species Pseudomonas aeruginosa and Staphylococcus aureus biofilms in porcine wound models. Significant reductions in CFU counts were shown for some of the dressings, although the log reductions were low. Results suggest that an improved release/ diffusion of dressing treatments could produce a more homogeneous and efficacious killing of wound-relevant single species and polymicrobial communities.
Start Year 2020
 
Description NBIC POC 03POC20-150 Biofilm disruption activity of absorbent sustained action alginate and iodine combined wound dressings (Manuel Romero) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Io-Cyte Ltd (www.io-cyte.co.uk) is an SME (spun out from Xiros Ltd) engaged in the development of a novel alginate and iodine combined absorbent sustained-action wound dressings, which has demonstrated high efficacy against single-species biofilms (CDC Bioreactor model). With this proposal, Io-Cyte wishes to build additional confidence in this new dressing concept using more challenging and clinically relevant biofilm models. These will comprise a complex inter-kingdom polymicrobial biofilm model that has shown high levels of tolerance to commercial wound formulations (including antimicrobials like silver salts) in previous tests carried out at the University of Nottingham, and an ex vivo porcine skin infection model optimised for wound therapeutic testing in the University of Southampton. The overall aim of the project is therefore, to aid in the optimisation of a novel antimicrobial wound dressing and to provide strong supporting evidence for the effectiveness of the dressing against biofilms. The key goals are as follows: Determine whether the Io-Cyte technology is effective against polymicrobial biofilms; Determine if the products work in very different biofilm models (abiotic and biotic surfaces); Collaboratively identify the most effective formulation against biofilms which can be taken forward for further development. Success will be measured based on the outcomes from the different biofilm models and the ability to use the results and knowledge gained to drive product development. A second measure of success will relate to selection of an appropriate loading of the active agent to be effective against biofilms in the models used.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Three povidone-iodine (PVPI)-containing dressings provided by Io-Cyte were tested against polymicrobial biofilms including the wound relevant pathogens: Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. Despite no significant reduction in colony forming units (CFU) counts for all microbial species were recorded, confocal microscopy analysis showed that PVPI releasing dressings cause a reduction in biofilm viability in a non-uniform way. The same dressings were tested against single species Pseudomonas aeruginosa and Staphylococcus aureus biofilms in porcine wound models. Significant reductions in CFU counts were shown for some of the dressings, although the log reductions were low. Results suggest that an improved release/ diffusion of dressing treatments could produce a more homogeneous and efficacious killing of wound-relevant single species and polymicrobial communities.
Start Year 2020
 
Description NBIC POC 03POC20-150 Biofilm disruption activity of absorbent sustained action alginate and iodine combined wound dressings (Manuel Romero) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Io-Cyte Ltd (www.io-cyte.co.uk) is an SME (spun out from Xiros Ltd) engaged in the development of a novel alginate and iodine combined absorbent sustained-action wound dressings, which has demonstrated high efficacy against single-species biofilms (CDC Bioreactor model). With this proposal, Io-Cyte wishes to build additional confidence in this new dressing concept using more challenging and clinically relevant biofilm models. These will comprise a complex inter-kingdom polymicrobial biofilm model that has shown high levels of tolerance to commercial wound formulations (including antimicrobials like silver salts) in previous tests carried out at the University of Nottingham, and an ex vivo porcine skin infection model optimised for wound therapeutic testing in the University of Southampton. The overall aim of the project is therefore, to aid in the optimisation of a novel antimicrobial wound dressing and to provide strong supporting evidence for the effectiveness of the dressing against biofilms. The key goals are as follows: Determine whether the Io-Cyte technology is effective against polymicrobial biofilms; Determine if the products work in very different biofilm models (abiotic and biotic surfaces); Collaboratively identify the most effective formulation against biofilms which can be taken forward for further development. Success will be measured based on the outcomes from the different biofilm models and the ability to use the results and knowledge gained to drive product development. A second measure of success will relate to selection of an appropriate loading of the active agent to be effective against biofilms in the models used.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Three povidone-iodine (PVPI)-containing dressings provided by Io-Cyte were tested against polymicrobial biofilms including the wound relevant pathogens: Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. Despite no significant reduction in colony forming units (CFU) counts for all microbial species were recorded, confocal microscopy analysis showed that PVPI releasing dressings cause a reduction in biofilm viability in a non-uniform way. The same dressings were tested against single species Pseudomonas aeruginosa and Staphylococcus aureus biofilms in porcine wound models. Significant reductions in CFU counts were shown for some of the dressings, although the log reductions were low. Results suggest that an improved release/ diffusion of dressing treatments could produce a more homogeneous and efficacious killing of wound-relevant single species and polymicrobial communities.
Start Year 2020
 
Description NBIC POC 03POC20-150 Biofilm disruption activity of absorbent sustained action alginate and iodine combined wound dressings (Manuel Romero) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Io-Cyte Ltd (www.io-cyte.co.uk) is an SME (spun out from Xiros Ltd) engaged in the development of a novel alginate and iodine combined absorbent sustained-action wound dressings, which has demonstrated high efficacy against single-species biofilms (CDC Bioreactor model). With this proposal, Io-Cyte wishes to build additional confidence in this new dressing concept using more challenging and clinically relevant biofilm models. These will comprise a complex inter-kingdom polymicrobial biofilm model that has shown high levels of tolerance to commercial wound formulations (including antimicrobials like silver salts) in previous tests carried out at the University of Nottingham, and an ex vivo porcine skin infection model optimised for wound therapeutic testing in the University of Southampton. The overall aim of the project is therefore, to aid in the optimisation of a novel antimicrobial wound dressing and to provide strong supporting evidence for the effectiveness of the dressing against biofilms. The key goals are as follows: Determine whether the Io-Cyte technology is effective against polymicrobial biofilms; Determine if the products work in very different biofilm models (abiotic and biotic surfaces); Collaboratively identify the most effective formulation against biofilms which can be taken forward for further development. Success will be measured based on the outcomes from the different biofilm models and the ability to use the results and knowledge gained to drive product development. A second measure of success will relate to selection of an appropriate loading of the active agent to be effective against biofilms in the models used.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Three povidone-iodine (PVPI)-containing dressings provided by Io-Cyte were tested against polymicrobial biofilms including the wound relevant pathogens: Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. Despite no significant reduction in colony forming units (CFU) counts for all microbial species were recorded, confocal microscopy analysis showed that PVPI releasing dressings cause a reduction in biofilm viability in a non-uniform way. The same dressings were tested against single species Pseudomonas aeruginosa and Staphylococcus aureus biofilms in porcine wound models. Significant reductions in CFU counts were shown for some of the dressings, although the log reductions were low. Results suggest that an improved release/ diffusion of dressing treatments could produce a more homogeneous and efficacious killing of wound-relevant single species and polymicrobial communities.
Start Year 2020
 
Description NBIC POC 03POC20-154 Novel hybrid biofilm technology to remove nutrients from wastewater (Yongqiang Liu) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Eutrophication of water bodies caused by excessive discharge of nutrients from agriculture and wastewater treatment plants is a widely recognised issue. Existing technology for removal of nutrients from wastewater cannot currently achieve very low levels of Total Nitrogen (TN) and Total Phosphorus (TP) in a sustainable, cost-effective manner. The University of Southampton (UoS) has developed a self-immobilized microbial granular biofilm technology, which is capable of removing carbon, and TN in a single reactor. Plantwork Systems Ltd (PWS) has demonstrated TP removal well below 0.5 mg/L in a prototype technology called NUTREM®, however, TN removal is not demonstrated. Both technologies are based on Sequencing Batch Reactor (SBR) technology, therefore, UoS and PWS will collaborate with a view to developing and demonstrating a hybrid flocculent/granular sludge technology which targets both TN and TP in the full-scale operating NUTREM® prototype plant at Petersfield in Hampshire. The specific objectives include: Review TN removal potential in the current prototype NUTREM® plant designed for TP removal. Adjust the process to enable hydraulic selection pressure within the NUTREM® plant to stimulate partial conversion of flocculent sludge to granular biofilm sludge to improve retention of nitrifying bacteria. Use a scale-up and scale-down approach to optimise the hybrid flocculent/granular biofilm process to achieve simultaneous TN and TP removal in both full-scale NUTREM and bench-scale SBRs. Assess the function and contribution of flocculent sludge and granular sludge in both full-scale hybrid NUTREM and bench-scale SBRs for simultaneous TN and TP removal. Success of the project would be measured based on achieving target levels of <5mg/l TN and <0.5mg/l TP simultaneously and consistently, without the requirement for any chemical addition.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The 3 lab-scale reactors easily achieved 15 mg/L phosphate P removal and up to 70 mg/L ammonium-N removal during 5.5-month operation period. Hybrid sludge containing both suspended and granular sludge was successfully developed with the overall sludge index volume (SVI) varying between 37 and 67 ml/g, indicating much better sludge settleability than full-scale reactors 01 and 02. However, with a long settling time of 30 minutes, it took around 3 months to achieve SVI of 37-67 ml/g, which is longer than using shorter settling times for a pure granular sludge system. The low average effluent TN of 3.69 mg/l was achieved in the full-scale reactor 02 by using additional anoxic time, while the average of 5.51mg/l in reactor 01 was achieved by altering conditions for the development of granular sludge. The settleability of the sludge in reactor 01, however, was notably improved with SVI reduced from 233 to 104 ml/g, indicating that sludge characteristics were changed towards granular sludge. Due to the alteration of conditions, the MLSS in reactor 01 were also lowered to <1,500mg/l instead of the targeted 3,000mg/l. Given additional time, the MLSS concentration would be expected to increase. This is still being monitored post project completion. Further collaboration between PWS and UoS has been being carried out by continuing to operate the full-scale SBRs for confirmation of results obtained from this project. In addition, to further the project, a 50% PhD studentship was provided by PWS to match 50% fund from UoS to continue relevant research in both lab-scale and full-scale SBRs in the next 4 years by a PhD student.
Start Year 2021
 
Description NBIC POC 03POC20-154 Novel hybrid biofilm technology to remove nutrients from wastewater (Yongqiang Liu) 
Organisation Plantworks Ltd UK
Country United Kingdom 
Sector Private 
PI Contribution Eutrophication of water bodies caused by excessive discharge of nutrients from agriculture and wastewater treatment plants is a widely recognised issue. Existing technology for removal of nutrients from wastewater cannot currently achieve very low levels of Total Nitrogen (TN) and Total Phosphorus (TP) in a sustainable, cost-effective manner. The University of Southampton (UoS) has developed a self-immobilized microbial granular biofilm technology, which is capable of removing carbon, and TN in a single reactor. Plantwork Systems Ltd (PWS) has demonstrated TP removal well below 0.5 mg/L in a prototype technology called NUTREM®, however, TN removal is not demonstrated. Both technologies are based on Sequencing Batch Reactor (SBR) technology, therefore, UoS and PWS will collaborate with a view to developing and demonstrating a hybrid flocculent/granular sludge technology which targets both TN and TP in the full-scale operating NUTREM® prototype plant at Petersfield in Hampshire. The specific objectives include: Review TN removal potential in the current prototype NUTREM® plant designed for TP removal. Adjust the process to enable hydraulic selection pressure within the NUTREM® plant to stimulate partial conversion of flocculent sludge to granular biofilm sludge to improve retention of nitrifying bacteria. Use a scale-up and scale-down approach to optimise the hybrid flocculent/granular biofilm process to achieve simultaneous TN and TP removal in both full-scale NUTREM and bench-scale SBRs. Assess the function and contribution of flocculent sludge and granular sludge in both full-scale hybrid NUTREM and bench-scale SBRs for simultaneous TN and TP removal. Success of the project would be measured based on achieving target levels of <5mg/l TN and <0.5mg/l TP simultaneously and consistently, without the requirement for any chemical addition.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The 3 lab-scale reactors easily achieved 15 mg/L phosphate P removal and up to 70 mg/L ammonium-N removal during 5.5-month operation period. Hybrid sludge containing both suspended and granular sludge was successfully developed with the overall sludge index volume (SVI) varying between 37 and 67 ml/g, indicating much better sludge settleability than full-scale reactors 01 and 02. However, with a long settling time of 30 minutes, it took around 3 months to achieve SVI of 37-67 ml/g, which is longer than using shorter settling times for a pure granular sludge system. The low average effluent TN of 3.69 mg/l was achieved in the full-scale reactor 02 by using additional anoxic time, while the average of 5.51mg/l in reactor 01 was achieved by altering conditions for the development of granular sludge. The settleability of the sludge in reactor 01, however, was notably improved with SVI reduced from 233 to 104 ml/g, indicating that sludge characteristics were changed towards granular sludge. Due to the alteration of conditions, the MLSS in reactor 01 were also lowered to <1,500mg/l instead of the targeted 3,000mg/l. Given additional time, the MLSS concentration would be expected to increase. This is still being monitored post project completion. Further collaboration between PWS and UoS has been being carried out by continuing to operate the full-scale SBRs for confirmation of results obtained from this project. In addition, to further the project, a 50% PhD studentship was provided by PWS to match 50% fund from UoS to continue relevant research in both lab-scale and full-scale SBRs in the next 4 years by a PhD student.
Start Year 2021
 
Description NBIC POC 03POC20-154 Novel hybrid biofilm technology to remove nutrients from wastewater (Yongqiang Liu) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Eutrophication of water bodies caused by excessive discharge of nutrients from agriculture and wastewater treatment plants is a widely recognised issue. Existing technology for removal of nutrients from wastewater cannot currently achieve very low levels of Total Nitrogen (TN) and Total Phosphorus (TP) in a sustainable, cost-effective manner. The University of Southampton (UoS) has developed a self-immobilized microbial granular biofilm technology, which is capable of removing carbon, and TN in a single reactor. Plantwork Systems Ltd (PWS) has demonstrated TP removal well below 0.5 mg/L in a prototype technology called NUTREM®, however, TN removal is not demonstrated. Both technologies are based on Sequencing Batch Reactor (SBR) technology, therefore, UoS and PWS will collaborate with a view to developing and demonstrating a hybrid flocculent/granular sludge technology which targets both TN and TP in the full-scale operating NUTREM® prototype plant at Petersfield in Hampshire. The specific objectives include: Review TN removal potential in the current prototype NUTREM® plant designed for TP removal. Adjust the process to enable hydraulic selection pressure within the NUTREM® plant to stimulate partial conversion of flocculent sludge to granular biofilm sludge to improve retention of nitrifying bacteria. Use a scale-up and scale-down approach to optimise the hybrid flocculent/granular biofilm process to achieve simultaneous TN and TP removal in both full-scale NUTREM and bench-scale SBRs. Assess the function and contribution of flocculent sludge and granular sludge in both full-scale hybrid NUTREM and bench-scale SBRs for simultaneous TN and TP removal. Success of the project would be measured based on achieving target levels of <5mg/l TN and <0.5mg/l TP simultaneously and consistently, without the requirement for any chemical addition.
Collaborator Contribution Full collaborative partners in this POC project.
Impact The 3 lab-scale reactors easily achieved 15 mg/L phosphate P removal and up to 70 mg/L ammonium-N removal during 5.5-month operation period. Hybrid sludge containing both suspended and granular sludge was successfully developed with the overall sludge index volume (SVI) varying between 37 and 67 ml/g, indicating much better sludge settleability than full-scale reactors 01 and 02. However, with a long settling time of 30 minutes, it took around 3 months to achieve SVI of 37-67 ml/g, which is longer than using shorter settling times for a pure granular sludge system. The low average effluent TN of 3.69 mg/l was achieved in the full-scale reactor 02 by using additional anoxic time, while the average of 5.51mg/l in reactor 01 was achieved by altering conditions for the development of granular sludge. The settleability of the sludge in reactor 01, however, was notably improved with SVI reduced from 233 to 104 ml/g, indicating that sludge characteristics were changed towards granular sludge. Due to the alteration of conditions, the MLSS in reactor 01 were also lowered to <1,500mg/l instead of the targeted 3,000mg/l. Given additional time, the MLSS concentration would be expected to increase. This is still being monitored post project completion. Further collaboration between PWS and UoS has been being carried out by continuing to operate the full-scale SBRs for confirmation of results obtained from this project. In addition, to further the project, a 50% PhD studentship was provided by PWS to match 50% fund from UoS to continue relevant research in both lab-scale and full-scale SBRs in the next 4 years by a PhD student.
Start Year 2021
 
Description NBIC POC 04POC21-188 An industrial whole organism assay for biofilms made by pathogenic bacteria without the use of laboratory mammals. (Marina Ezcurra) 
Organisation Magnitude Biosciences
Country United Kingdom 
Sector Private 
PI Contribution Our aim is to provide sufficient proof-of-principle data to support the development of a commercial in vivo assay for biofilm formation using C. elegans by the CROs, Perfectus Biomed and Magnitude Biosciences. A commercialised in vivo biofilm model would be widely available to industry and academic researchers, filling a market gap. Assays not involving rodents will be faster, more cost effective and reduces ethical impact Perfectus Biomed specialises in accredited biofilm assays. Magnitude Biosciences is a C. elegans CRO with customers in the microbiome field. Both have potential markets for an in vivo biofilm assay. Pseudomonas aeruginosa is a multidrug-resistant, opportunistic pathogen that causes chronic infections and threatens the lives of patients that are immunocompromised, have cystic fibrosis or are in critical care. Biofilm-forming P. aeruginosa exhibit decreased susceptibility to antibiotics and host immunity, making infections almost impossible to eradicate. Unlike existing in vitro laboratory models such as microfluidic devices, a C. elegans in vivo model would mimic biofilm characteristics within host tissues and provide a readout of host health. We aim to develop a simple system to monitor and study P. aeruginosa biofilms in vivo using the nematode invertebrate C. elegans, a well-established whole-animal model for biological research that offers inexpensive and simple cultivation methods. We will: Generate fluorescent biofilm markers that can be tracked in vivo. Monitor the effects of P. aeruginosa biofilms, and of the addition of existing P. aeruginosa treatments, on host health, as assessed by measuring animal movement. Evaluate assays of live C. elegans using microplate readers. A successful outcome will be measured by: Perfectus investing in generating a ISO/GLP certified assay. Magnitude finding interest from its customer base from exposure of the preliminary data. Dissemination of research by Dr Ezcurra. Moving towards assay customisation through joint grant applications by the partners.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: In this project, the Ezcurra Lab at University of Kent and SMEs Magnitude Biosciences and Perfectus Biomed collaborated to work towards developing the use of C. elegans as a tool for industrial research on pathogenic biofilms. Transgenic P. aeruginosa reporters were sourced from the research community and their potential for detecting P. aeruginosa in vivo in C. elegans was evaluated. In vitro approaches combined with in vivo C. elegans assays identified fluorescent P. aeruginosa biofilm reporters that can be used to detect infection in vivo in C. elegans. Our work suggests that P. aeruginosa biofilms increase pathogenicity in C. elegans and that biofilm-compromised P. aeruginosa have reduced pathogenicity. Our study demonstrates that C. elegans can be used as a tool to study pathogenic biofilms and evaluate anti-biofilm strategies in vivo. Further work is needed to develop appropriate reagents that can be used effectively to monitor biofilm formation in live C. elegans. Throughout the project, the collaborators worked together to drive the project forward. Experimental design, protocol development and results were discussed at monthly meetings. Visits were performed at all three sites, enabling staff training, knowledge exchange and further discussions. Through these mechanisms partnerships have been developed between the collaborators and a strong basis for continued collaboration created. Together our findings show that fluorescent P. aeruginosa biofilm reporters can be used to detect infection in vivo in C. elegans and suggest that P. aeruginosa biofilms increase pathogenicity in C. elegans. Our project builds a strong case for the use of C. elegans as a tool to study pathogenic biofilms and evaluate anti-biofilm strategies in vivo. Further studies are needed to develop improved tools allowing improved visualisation and quantification of biofilms in C. elegans. Next steps: ONGOING RESEARCH: A Masters student in the Ezcurra lab is continuing evaluation of the reagents (measuring fluorescence in C. elegans in microtiter plates and testing biofilm inhibitors). PUBLICATION: The work presented in this report will be developed into a manuscript for publication. Work is ongoing in the Ezcurra lab to perform more trials and additional experiments. The publication will be of value for the scientific community and put the collaborators in a good position for joint grant applications. GRANT APPLICATIONS: The collaborators will seek and apply for grants to fund projects aiming to develop C. elegans as a tool for industrial research on pathogenic biofilms.
Start Year 2021
 
Description NBIC POC 04POC21-188 An industrial whole organism assay for biofilms made by pathogenic bacteria without the use of laboratory mammals. (Marina Ezcurra) 
Organisation Perfectus Biomed Ltd.
Country United Kingdom 
Sector Private 
PI Contribution Our aim is to provide sufficient proof-of-principle data to support the development of a commercial in vivo assay for biofilm formation using C. elegans by the CROs, Perfectus Biomed and Magnitude Biosciences. A commercialised in vivo biofilm model would be widely available to industry and academic researchers, filling a market gap. Assays not involving rodents will be faster, more cost effective and reduces ethical impact Perfectus Biomed specialises in accredited biofilm assays. Magnitude Biosciences is a C. elegans CRO with customers in the microbiome field. Both have potential markets for an in vivo biofilm assay. Pseudomonas aeruginosa is a multidrug-resistant, opportunistic pathogen that causes chronic infections and threatens the lives of patients that are immunocompromised, have cystic fibrosis or are in critical care. Biofilm-forming P. aeruginosa exhibit decreased susceptibility to antibiotics and host immunity, making infections almost impossible to eradicate. Unlike existing in vitro laboratory models such as microfluidic devices, a C. elegans in vivo model would mimic biofilm characteristics within host tissues and provide a readout of host health. We aim to develop a simple system to monitor and study P. aeruginosa biofilms in vivo using the nematode invertebrate C. elegans, a well-established whole-animal model for biological research that offers inexpensive and simple cultivation methods. We will: Generate fluorescent biofilm markers that can be tracked in vivo. Monitor the effects of P. aeruginosa biofilms, and of the addition of existing P. aeruginosa treatments, on host health, as assessed by measuring animal movement. Evaluate assays of live C. elegans using microplate readers. A successful outcome will be measured by: Perfectus investing in generating a ISO/GLP certified assay. Magnitude finding interest from its customer base from exposure of the preliminary data. Dissemination of research by Dr Ezcurra. Moving towards assay customisation through joint grant applications by the partners.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: In this project, the Ezcurra Lab at University of Kent and SMEs Magnitude Biosciences and Perfectus Biomed collaborated to work towards developing the use of C. elegans as a tool for industrial research on pathogenic biofilms. Transgenic P. aeruginosa reporters were sourced from the research community and their potential for detecting P. aeruginosa in vivo in C. elegans was evaluated. In vitro approaches combined with in vivo C. elegans assays identified fluorescent P. aeruginosa biofilm reporters that can be used to detect infection in vivo in C. elegans. Our work suggests that P. aeruginosa biofilms increase pathogenicity in C. elegans and that biofilm-compromised P. aeruginosa have reduced pathogenicity. Our study demonstrates that C. elegans can be used as a tool to study pathogenic biofilms and evaluate anti-biofilm strategies in vivo. Further work is needed to develop appropriate reagents that can be used effectively to monitor biofilm formation in live C. elegans. Throughout the project, the collaborators worked together to drive the project forward. Experimental design, protocol development and results were discussed at monthly meetings. Visits were performed at all three sites, enabling staff training, knowledge exchange and further discussions. Through these mechanisms partnerships have been developed between the collaborators and a strong basis for continued collaboration created. Together our findings show that fluorescent P. aeruginosa biofilm reporters can be used to detect infection in vivo in C. elegans and suggest that P. aeruginosa biofilms increase pathogenicity in C. elegans. Our project builds a strong case for the use of C. elegans as a tool to study pathogenic biofilms and evaluate anti-biofilm strategies in vivo. Further studies are needed to develop improved tools allowing improved visualisation and quantification of biofilms in C. elegans. Next steps: ONGOING RESEARCH: A Masters student in the Ezcurra lab is continuing evaluation of the reagents (measuring fluorescence in C. elegans in microtiter plates and testing biofilm inhibitors). PUBLICATION: The work presented in this report will be developed into a manuscript for publication. Work is ongoing in the Ezcurra lab to perform more trials and additional experiments. The publication will be of value for the scientific community and put the collaborators in a good position for joint grant applications. GRANT APPLICATIONS: The collaborators will seek and apply for grants to fund projects aiming to develop C. elegans as a tool for industrial research on pathogenic biofilms.
Start Year 2021
 
Description NBIC POC 04POC21-188 An industrial whole organism assay for biofilms made by pathogenic bacteria without the use of laboratory mammals. (Marina Ezcurra) 
Organisation University of Kent
Country United Kingdom 
Sector Academic/University 
PI Contribution Our aim is to provide sufficient proof-of-principle data to support the development of a commercial in vivo assay for biofilm formation using C. elegans by the CROs, Perfectus Biomed and Magnitude Biosciences. A commercialised in vivo biofilm model would be widely available to industry and academic researchers, filling a market gap. Assays not involving rodents will be faster, more cost effective and reduces ethical impact Perfectus Biomed specialises in accredited biofilm assays. Magnitude Biosciences is a C. elegans CRO with customers in the microbiome field. Both have potential markets for an in vivo biofilm assay. Pseudomonas aeruginosa is a multidrug-resistant, opportunistic pathogen that causes chronic infections and threatens the lives of patients that are immunocompromised, have cystic fibrosis or are in critical care. Biofilm-forming P. aeruginosa exhibit decreased susceptibility to antibiotics and host immunity, making infections almost impossible to eradicate. Unlike existing in vitro laboratory models such as microfluidic devices, a C. elegans in vivo model would mimic biofilm characteristics within host tissues and provide a readout of host health. We aim to develop a simple system to monitor and study P. aeruginosa biofilms in vivo using the nematode invertebrate C. elegans, a well-established whole-animal model for biological research that offers inexpensive and simple cultivation methods. We will: Generate fluorescent biofilm markers that can be tracked in vivo. Monitor the effects of P. aeruginosa biofilms, and of the addition of existing P. aeruginosa treatments, on host health, as assessed by measuring animal movement. Evaluate assays of live C. elegans using microplate readers. A successful outcome will be measured by: Perfectus investing in generating a ISO/GLP certified assay. Magnitude finding interest from its customer base from exposure of the preliminary data. Dissemination of research by Dr Ezcurra. Moving towards assay customisation through joint grant applications by the partners.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: In this project, the Ezcurra Lab at University of Kent and SMEs Magnitude Biosciences and Perfectus Biomed collaborated to work towards developing the use of C. elegans as a tool for industrial research on pathogenic biofilms. Transgenic P. aeruginosa reporters were sourced from the research community and their potential for detecting P. aeruginosa in vivo in C. elegans was evaluated. In vitro approaches combined with in vivo C. elegans assays identified fluorescent P. aeruginosa biofilm reporters that can be used to detect infection in vivo in C. elegans. Our work suggests that P. aeruginosa biofilms increase pathogenicity in C. elegans and that biofilm-compromised P. aeruginosa have reduced pathogenicity. Our study demonstrates that C. elegans can be used as a tool to study pathogenic biofilms and evaluate anti-biofilm strategies in vivo. Further work is needed to develop appropriate reagents that can be used effectively to monitor biofilm formation in live C. elegans. Throughout the project, the collaborators worked together to drive the project forward. Experimental design, protocol development and results were discussed at monthly meetings. Visits were performed at all three sites, enabling staff training, knowledge exchange and further discussions. Through these mechanisms partnerships have been developed between the collaborators and a strong basis for continued collaboration created. Together our findings show that fluorescent P. aeruginosa biofilm reporters can be used to detect infection in vivo in C. elegans and suggest that P. aeruginosa biofilms increase pathogenicity in C. elegans. Our project builds a strong case for the use of C. elegans as a tool to study pathogenic biofilms and evaluate anti-biofilm strategies in vivo. Further studies are needed to develop improved tools allowing improved visualisation and quantification of biofilms in C. elegans. Next steps: ONGOING RESEARCH: A Masters student in the Ezcurra lab is continuing evaluation of the reagents (measuring fluorescence in C. elegans in microtiter plates and testing biofilm inhibitors). PUBLICATION: The work presented in this report will be developed into a manuscript for publication. Work is ongoing in the Ezcurra lab to perform more trials and additional experiments. The publication will be of value for the scientific community and put the collaborators in a good position for joint grant applications. GRANT APPLICATIONS: The collaborators will seek and apply for grants to fund projects aiming to develop C. elegans as a tool for industrial research on pathogenic biofilms.
Start Year 2021
 
Description NBIC POC 04POC21-218 Utilising biofilm-driven mineral precipitation for sustainable construction materials and a healthy built environment. (Susanne Gebhard) 
Organisation Adaptavate
Country United Kingdom 
Sector Private 
PI Contribution Our aim is to use a biofilm-driven bacterial process to improve the properties and performance of a novel, environment-friendly plasterboard technology to reach competitiveness in the market. Current gypsum-based plasterboard contributes >3% of anthropogenic UK greenhouse gas emissions duringmanufacture, and its later disposal produces toxic waste. The lime-based alternative being developed by Adaptavate ('Breathaboard') has the potential to be carbon positive (i.e. sequester CO2) and is compostable. However, it currently only reaches 80% of the flexural strength stipulated by the industrial standard, preventing marketisation. The project's aim is to improve this strength by application of the bacteria-based construction technology (BBCT) developed by the Bath investigators. Our BBCT hinges on microbially induced calcite precipitation (MICP), which we have shown can be driven by biofilm formation. Two key reasons for the currently insufficient strength of Breathaboard are poor bonding between matrix and hygrothermal hemp particles used to improve breathability, and between the composite and external paper layers. Our preliminary work indicates that biofilm-driven MICP will improve the matrix-hemp bonding and is likely to also improve bonding between plaster and paper. We expect resulting strength improvements in biofilm-modified Breathaboard to be sufficient for approaching market readiness. In this proof-of-concept project we will: Establish the feasibility of using biofilm-driven MICP in pre-treatment of hemp shiv particles. Determine improved bonding between plaster and external paper layers from incorporation of BBCT biofilms at the interface. Demonstrate flexural strength improvements of Breathaboard by use of biofilm driven MICP. To achieve this, we will compare the performance of standard Breathaboard to ones enhanced with: (i) biofilm-driven MICP, and (ii) the basic non-biofilm BBCT currently in use at Bath. Success will be measured by biofilm-enhanced Breathaboard conforming to BS EN 520 for flexural strength and in the development of protocols and data to file for IP protection.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: The outcomes of this work show that application of Bath's BBCT to the organic and paper components of Breathaboard is feasible, with the former showing promising although currently minor effects on material strength. The variable performance of BBCT in this new context appeared to be largely due to limited spatial control over where the BBCT activity can be directed. This offers exciting opportunities for future research into the underpinning mechanisms of the technology to open up wider scopes of its application. The project partners have agreed to continue some of the initiated activities, including investigations of how BBCT impacts on Breathaboard microstructures, to fully understand the interactions between both technologies and identify routes of further improvement. If successful, these efforts could lead to the development of a truly sustainable alternative to current plasterboards to make a real difference to carbon emissions of the construction industry. Overall, the following conclusions can be drawn from this work: • Bacterial pre-treatment of hemp shiv results in substantial precipitation of calcium carbonate (calcite) to the shiv fraction, but mineralisation on the shiv surface is minimal. • Bacterial biofilms can be formed on the core-facing side of the outer paper of Breathaboard, but this may have adverse effects on the paper for downstream production. • Bacterial pre-treatment of hemp shiv does not impact the material's workability. • Lab-scale specimens of Breathaboard core material showed some promising results following bacterial pre-treatment, but with batch-to-batch variability • Lab-scale specimens of Breathaboard using pre-treated paper showed no significant effects of bacterial treatment on paper-core bonding, but overall bonding was already strong in the control samples. Future work: Future work will study electron micrographs of the specimens produced to gain a deeper understanding of any micro-scale changes to allow a more complete interpretation of the obtained results and identify routes forward for further exploration or adaptation of our processes. Two main directions for future work are envisaged: a) The main problem we encountered was that, while the bacteria effectively precipitated calcium carbonate and this mineral was associated with the hemp shiv, the precipitation did not primarily occur on the shiv surface as intended. To address this, we need to get a much better fundamental understanding of biofilm formation specifically on the hemp shiv surface, as the bacteria seemed to not directly attach themselves to this material, and then how this can be exploited for more effective precipitation directly onto the shiv. This will be subject for microbiology-focussed research by the PI's laboratory and may lead to funding applications, depending on outcomes of initial new work. Our industrial partner has agreed to provide the shiv material for this work, to keep the collaboration going beyond the end of the POC funding. b) A new possibility of using the bacteria in our partner's plasterboard product, which emerged during the work on this POC project, was that direct addition of the bacteria to the core material, rather than pre-treating the shiv, might lead to the desired effect but via a different mechanism. This work will now be piloted by a research assistant in the Co-I's team. If promising results are obtained, future funding will be sought. This work may also lead to development of new intellectual property, and as stated in the above section, we have already requested an extension of the Option Period in the collaboration agreement to cover any results that may come out of this work. This work will also be done in a continuation of the partnership of this POC project.
Start Year 2021
 
Description NBIC POC 04POC21-218 Utilising biofilm-driven mineral precipitation for sustainable construction materials and a healthy built environment. (Susanne Gebhard) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Our aim is to use a biofilm-driven bacterial process to improve the properties and performance of a novel, environment-friendly plasterboard technology to reach competitiveness in the market. Current gypsum-based plasterboard contributes >3% of anthropogenic UK greenhouse gas emissions duringmanufacture, and its later disposal produces toxic waste. The lime-based alternative being developed by Adaptavate ('Breathaboard') has the potential to be carbon positive (i.e. sequester CO2) and is compostable. However, it currently only reaches 80% of the flexural strength stipulated by the industrial standard, preventing marketisation. The project's aim is to improve this strength by application of the bacteria-based construction technology (BBCT) developed by the Bath investigators. Our BBCT hinges on microbially induced calcite precipitation (MICP), which we have shown can be driven by biofilm formation. Two key reasons for the currently insufficient strength of Breathaboard are poor bonding between matrix and hygrothermal hemp particles used to improve breathability, and between the composite and external paper layers. Our preliminary work indicates that biofilm-driven MICP will improve the matrix-hemp bonding and is likely to also improve bonding between plaster and paper. We expect resulting strength improvements in biofilm-modified Breathaboard to be sufficient for approaching market readiness. In this proof-of-concept project we will: Establish the feasibility of using biofilm-driven MICP in pre-treatment of hemp shiv particles. Determine improved bonding between plaster and external paper layers from incorporation of BBCT biofilms at the interface. Demonstrate flexural strength improvements of Breathaboard by use of biofilm driven MICP. To achieve this, we will compare the performance of standard Breathaboard to ones enhanced with: (i) biofilm-driven MICP, and (ii) the basic non-biofilm BBCT currently in use at Bath. Success will be measured by biofilm-enhanced Breathaboard conforming to BS EN 520 for flexural strength and in the development of protocols and data to file for IP protection.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: The outcomes of this work show that application of Bath's BBCT to the organic and paper components of Breathaboard is feasible, with the former showing promising although currently minor effects on material strength. The variable performance of BBCT in this new context appeared to be largely due to limited spatial control over where the BBCT activity can be directed. This offers exciting opportunities for future research into the underpinning mechanisms of the technology to open up wider scopes of its application. The project partners have agreed to continue some of the initiated activities, including investigations of how BBCT impacts on Breathaboard microstructures, to fully understand the interactions between both technologies and identify routes of further improvement. If successful, these efforts could lead to the development of a truly sustainable alternative to current plasterboards to make a real difference to carbon emissions of the construction industry. Overall, the following conclusions can be drawn from this work: • Bacterial pre-treatment of hemp shiv results in substantial precipitation of calcium carbonate (calcite) to the shiv fraction, but mineralisation on the shiv surface is minimal. • Bacterial biofilms can be formed on the core-facing side of the outer paper of Breathaboard, but this may have adverse effects on the paper for downstream production. • Bacterial pre-treatment of hemp shiv does not impact the material's workability. • Lab-scale specimens of Breathaboard core material showed some promising results following bacterial pre-treatment, but with batch-to-batch variability • Lab-scale specimens of Breathaboard using pre-treated paper showed no significant effects of bacterial treatment on paper-core bonding, but overall bonding was already strong in the control samples. Future work: Future work will study electron micrographs of the specimens produced to gain a deeper understanding of any micro-scale changes to allow a more complete interpretation of the obtained results and identify routes forward for further exploration or adaptation of our processes. Two main directions for future work are envisaged: a) The main problem we encountered was that, while the bacteria effectively precipitated calcium carbonate and this mineral was associated with the hemp shiv, the precipitation did not primarily occur on the shiv surface as intended. To address this, we need to get a much better fundamental understanding of biofilm formation specifically on the hemp shiv surface, as the bacteria seemed to not directly attach themselves to this material, and then how this can be exploited for more effective precipitation directly onto the shiv. This will be subject for microbiology-focussed research by the PI's laboratory and may lead to funding applications, depending on outcomes of initial new work. Our industrial partner has agreed to provide the shiv material for this work, to keep the collaboration going beyond the end of the POC funding. b) A new possibility of using the bacteria in our partner's plasterboard product, which emerged during the work on this POC project, was that direct addition of the bacteria to the core material, rather than pre-treating the shiv, might lead to the desired effect but via a different mechanism. This work will now be piloted by a research assistant in the Co-I's team. If promising results are obtained, future funding will be sought. This work may also lead to development of new intellectual property, and as stated in the above section, we have already requested an extension of the Option Period in the collaboration agreement to cover any results that may come out of this work. This work will also be done in a continuation of the partnership of this POC project.
Start Year 2021
 
Description NBIC POC 04POC21-218 Utilising biofilm-driven mineral precipitation for sustainable construction materials and a healthy built environment. (Susanne Gebhard) 
Organisation University of Bath
Country United Kingdom 
Sector Academic/University 
PI Contribution Our aim is to use a biofilm-driven bacterial process to improve the properties and performance of a novel, environment-friendly plasterboard technology to reach competitiveness in the market. Current gypsum-based plasterboard contributes >3% of anthropogenic UK greenhouse gas emissions duringmanufacture, and its later disposal produces toxic waste. The lime-based alternative being developed by Adaptavate ('Breathaboard') has the potential to be carbon positive (i.e. sequester CO2) and is compostable. However, it currently only reaches 80% of the flexural strength stipulated by the industrial standard, preventing marketisation. The project's aim is to improve this strength by application of the bacteria-based construction technology (BBCT) developed by the Bath investigators. Our BBCT hinges on microbially induced calcite precipitation (MICP), which we have shown can be driven by biofilm formation. Two key reasons for the currently insufficient strength of Breathaboard are poor bonding between matrix and hygrothermal hemp particles used to improve breathability, and between the composite and external paper layers. Our preliminary work indicates that biofilm-driven MICP will improve the matrix-hemp bonding and is likely to also improve bonding between plaster and paper. We expect resulting strength improvements in biofilm-modified Breathaboard to be sufficient for approaching market readiness. In this proof-of-concept project we will: Establish the feasibility of using biofilm-driven MICP in pre-treatment of hemp shiv particles. Determine improved bonding between plaster and external paper layers from incorporation of BBCT biofilms at the interface. Demonstrate flexural strength improvements of Breathaboard by use of biofilm driven MICP. To achieve this, we will compare the performance of standard Breathaboard to ones enhanced with: (i) biofilm-driven MICP, and (ii) the basic non-biofilm BBCT currently in use at Bath. Success will be measured by biofilm-enhanced Breathaboard conforming to BS EN 520 for flexural strength and in the development of protocols and data to file for IP protection.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: The outcomes of this work show that application of Bath's BBCT to the organic and paper components of Breathaboard is feasible, with the former showing promising although currently minor effects on material strength. The variable performance of BBCT in this new context appeared to be largely due to limited spatial control over where the BBCT activity can be directed. This offers exciting opportunities for future research into the underpinning mechanisms of the technology to open up wider scopes of its application. The project partners have agreed to continue some of the initiated activities, including investigations of how BBCT impacts on Breathaboard microstructures, to fully understand the interactions between both technologies and identify routes of further improvement. If successful, these efforts could lead to the development of a truly sustainable alternative to current plasterboards to make a real difference to carbon emissions of the construction industry. Overall, the following conclusions can be drawn from this work: • Bacterial pre-treatment of hemp shiv results in substantial precipitation of calcium carbonate (calcite) to the shiv fraction, but mineralisation on the shiv surface is minimal. • Bacterial biofilms can be formed on the core-facing side of the outer paper of Breathaboard, but this may have adverse effects on the paper for downstream production. • Bacterial pre-treatment of hemp shiv does not impact the material's workability. • Lab-scale specimens of Breathaboard core material showed some promising results following bacterial pre-treatment, but with batch-to-batch variability • Lab-scale specimens of Breathaboard using pre-treated paper showed no significant effects of bacterial treatment on paper-core bonding, but overall bonding was already strong in the control samples. Future work: Future work will study electron micrographs of the specimens produced to gain a deeper understanding of any micro-scale changes to allow a more complete interpretation of the obtained results and identify routes forward for further exploration or adaptation of our processes. Two main directions for future work are envisaged: a) The main problem we encountered was that, while the bacteria effectively precipitated calcium carbonate and this mineral was associated with the hemp shiv, the precipitation did not primarily occur on the shiv surface as intended. To address this, we need to get a much better fundamental understanding of biofilm formation specifically on the hemp shiv surface, as the bacteria seemed to not directly attach themselves to this material, and then how this can be exploited for more effective precipitation directly onto the shiv. This will be subject for microbiology-focussed research by the PI's laboratory and may lead to funding applications, depending on outcomes of initial new work. Our industrial partner has agreed to provide the shiv material for this work, to keep the collaboration going beyond the end of the POC funding. b) A new possibility of using the bacteria in our partner's plasterboard product, which emerged during the work on this POC project, was that direct addition of the bacteria to the core material, rather than pre-treating the shiv, might lead to the desired effect but via a different mechanism. This work will now be piloted by a research assistant in the Co-I's team. If promising results are obtained, future funding will be sought. This work may also lead to development of new intellectual property, and as stated in the above section, we have already requested an extension of the Option Period in the collaboration agreement to cover any results that may come out of this work. This work will also be done in a continuation of the partnership of this POC project.
Start Year 2021
 
Description NBIC POC 04POC21-228 Endolysin technology for selective management of MRSA biofilms on skin and wounds. (Holly Wilkinson) 
Organisation Cica Biomedical Ltd
Country United Kingdom 
Sector Private 
PI Contribution The objective of this project is to determine the efficacy of a novel endolysin for the selective prevention and management of S. aureus biofilms on skin and in wounds. Current approaches: Despite extensive research and policy implementation, methicillin-resistant S. aureus (MRSA) continues to prove a major infection control challenge in the clinical setting, with outbreaks common. This is despite routine patient screening, strict infection control procedures and extensive use of systemic antibiotics/topical antimicrobials. Recent evidence reveals the importance of S. aureus biofilms in the pathogenesis of human chronic wounds, an area where treatment is dominated by low cost, largely ineffective wound dressings. There is a clear healthcare need to develop and bring to market an effective non-antibiotic strategy for the management of MRSA biofilms on skin and in wounds. Commercial innovation: This proposal offers a disruptive approach to skin and wound biofilm management; repurposing endolysin technology, originally developed for agriculture and food safety, to the infection control and wound care markets. Our highly innovative solution to biofilm management involves a patented endolysin technology that specifically targets S. aureus (including MRSA), thus strengthening a healthy microbiome without inducing antimicrobial resistance. Our study in brief: Our innovative project will test the suitability of endolysin technology for the selective management of S. aureus in skin and wound biofilms. Part 1 will confirm endolysin specificity against S. aureus versus a panel of wound-derived bacteria (membrane biofilms). Part 2 will test endolysin selectivity and efficacy against MRSA in mixed-species biofilms using our state-of-the-art human skin/wound biofilm model. In Part 3 an in vivo pilot study will be performed to support follow-on substantive translational funding applications. Evaluating success: Success will be measured against carefully designed work-package-linked project milestones. Clinical applicability will be maximised through the use of highly validated translational models with robust readout parameters.
Collaborator Contribution University of Hull: Ongoing development and application of biofilm-relevant wound models. Cica Biomedical Ltd: Provision of industry insight into biofilm wound models and identification of additional partner opportunities.
Impact Follow-on funding. The collaboration is multi-disciplinary combining in vitro, ex vivo and in vivo biofilm wound models. Feedback from academic: In this POC, we investigated the selectivity and efficacy of a novel bacteriophage-derived endolysin targeted against S. aureus. We demonstrated that this endolysin was potently effective against methicillin-susceptible and methicillin-resistant strains in single and mixed species biofilms, both in vitro and in our novel living human skin wound model. To determine the selectivity and efficacy of endolysin in a full microbiome system, we turned to our porcine wound model. Crucially, we found that endolysin was selective against S. aureus without depleting the resident microbiome. The successful completion of this POC has demonstrated the potent and selective efficacy of XZ.700 in preventing MRSA biofilm growth in vitro and in human ex vivo skin wounds. In addition, we provide novel, exciting data to show that XZ.700 can inhibit endogenous S. aureus growth in porcine wounds in vivo with no negative effects on healing. Indeed, these data have provided important preclinical information that will be used to aid the design of follow-on porcine wound studies and a first-in-man clinical study to assess the efficacy of XZ.700 in chronic wounds. Future work: The next steps of this work are to perform follow-on experiments to confirm efficacy and selectivity in our real-world porcine skin microbiome model, testing several treatment regimens that are clinically meaningful. We also plan to perform further experiments using living human skin to assess the effects of endolysin on host-bacterial interactions. Together, these data will provide a preclinical package that will inform follow-on clinical studies. We are currently preparing our first manuscript with Cica Biomedical Ltd and Micreos Pharma, focussing on the porcine skin/wound model. We are also planning to perform follow-on porcine wound experiments to test a number of treatment regimens that will be more relevant to the clinic (e.g. delaying starting treatment, combining with debridement etc), which will be directly funded by Micreos Pharma. As the human skin wound model did not reveal any clear healing effects, we are in discussions with Micreos Pharma about potential follow-on work that will allow us to better determine the efficacy of XZ.700 in this model. However, the focus at this time is the porcine wound experiments. Finally, we have applied for the NBIC CTP funding round (2022) to enable us to continue our industry-academic collaborations with Cica and Micreos. This will allow us to focus more on the mode-of-action of novel endolysins in the context of wound healing, and better understand the role of antimicrobial resistant S. aureus in chronic wound healing. We are also in discussions with Cica Biomedical Ltd. about other funding opportunities (e.g. Knowledge Transfer Partnerships) and utilising our porcine microbiome model for other industry partnerships.
Start Year 2021
 
Description NBIC POC 04POC21-228 Endolysin technology for selective management of MRSA biofilms on skin and wounds. (Holly Wilkinson) 
Organisation Micreos
Country Netherlands 
Sector Private 
PI Contribution The objective of this project is to determine the efficacy of a novel endolysin for the selective prevention and management of S. aureus biofilms on skin and in wounds. Current approaches: Despite extensive research and policy implementation, methicillin-resistant S. aureus (MRSA) continues to prove a major infection control challenge in the clinical setting, with outbreaks common. This is despite routine patient screening, strict infection control procedures and extensive use of systemic antibiotics/topical antimicrobials. Recent evidence reveals the importance of S. aureus biofilms in the pathogenesis of human chronic wounds, an area where treatment is dominated by low cost, largely ineffective wound dressings. There is a clear healthcare need to develop and bring to market an effective non-antibiotic strategy for the management of MRSA biofilms on skin and in wounds. Commercial innovation: This proposal offers a disruptive approach to skin and wound biofilm management; repurposing endolysin technology, originally developed for agriculture and food safety, to the infection control and wound care markets. Our highly innovative solution to biofilm management involves a patented endolysin technology that specifically targets S. aureus (including MRSA), thus strengthening a healthy microbiome without inducing antimicrobial resistance. Our study in brief: Our innovative project will test the suitability of endolysin technology for the selective management of S. aureus in skin and wound biofilms. Part 1 will confirm endolysin specificity against S. aureus versus a panel of wound-derived bacteria (membrane biofilms). Part 2 will test endolysin selectivity and efficacy against MRSA in mixed-species biofilms using our state-of-the-art human skin/wound biofilm model. In Part 3 an in vivo pilot study will be performed to support follow-on substantive translational funding applications. Evaluating success: Success will be measured against carefully designed work-package-linked project milestones. Clinical applicability will be maximised through the use of highly validated translational models with robust readout parameters.
Collaborator Contribution University of Hull: Ongoing development and application of biofilm-relevant wound models. Cica Biomedical Ltd: Provision of industry insight into biofilm wound models and identification of additional partner opportunities.
Impact Follow-on funding. The collaboration is multi-disciplinary combining in vitro, ex vivo and in vivo biofilm wound models. Feedback from academic: In this POC, we investigated the selectivity and efficacy of a novel bacteriophage-derived endolysin targeted against S. aureus. We demonstrated that this endolysin was potently effective against methicillin-susceptible and methicillin-resistant strains in single and mixed species biofilms, both in vitro and in our novel living human skin wound model. To determine the selectivity and efficacy of endolysin in a full microbiome system, we turned to our porcine wound model. Crucially, we found that endolysin was selective against S. aureus without depleting the resident microbiome. The successful completion of this POC has demonstrated the potent and selective efficacy of XZ.700 in preventing MRSA biofilm growth in vitro and in human ex vivo skin wounds. In addition, we provide novel, exciting data to show that XZ.700 can inhibit endogenous S. aureus growth in porcine wounds in vivo with no negative effects on healing. Indeed, these data have provided important preclinical information that will be used to aid the design of follow-on porcine wound studies and a first-in-man clinical study to assess the efficacy of XZ.700 in chronic wounds. Future work: The next steps of this work are to perform follow-on experiments to confirm efficacy and selectivity in our real-world porcine skin microbiome model, testing several treatment regimens that are clinically meaningful. We also plan to perform further experiments using living human skin to assess the effects of endolysin on host-bacterial interactions. Together, these data will provide a preclinical package that will inform follow-on clinical studies. We are currently preparing our first manuscript with Cica Biomedical Ltd and Micreos Pharma, focussing on the porcine skin/wound model. We are also planning to perform follow-on porcine wound experiments to test a number of treatment regimens that will be more relevant to the clinic (e.g. delaying starting treatment, combining with debridement etc), which will be directly funded by Micreos Pharma. As the human skin wound model did not reveal any clear healing effects, we are in discussions with Micreos Pharma about potential follow-on work that will allow us to better determine the efficacy of XZ.700 in this model. However, the focus at this time is the porcine wound experiments. Finally, we have applied for the NBIC CTP funding round (2022) to enable us to continue our industry-academic collaborations with Cica and Micreos. This will allow us to focus more on the mode-of-action of novel endolysins in the context of wound healing, and better understand the role of antimicrobial resistant S. aureus in chronic wound healing. We are also in discussions with Cica Biomedical Ltd. about other funding opportunities (e.g. Knowledge Transfer Partnerships) and utilising our porcine microbiome model for other industry partnerships.
Start Year 2021
 
Description NBIC POC 04POC21-228 Endolysin technology for selective management of MRSA biofilms on skin and wounds. (Holly Wilkinson) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The objective of this project is to determine the efficacy of a novel endolysin for the selective prevention and management of S. aureus biofilms on skin and in wounds. Current approaches: Despite extensive research and policy implementation, methicillin-resistant S. aureus (MRSA) continues to prove a major infection control challenge in the clinical setting, with outbreaks common. This is despite routine patient screening, strict infection control procedures and extensive use of systemic antibiotics/topical antimicrobials. Recent evidence reveals the importance of S. aureus biofilms in the pathogenesis of human chronic wounds, an area where treatment is dominated by low cost, largely ineffective wound dressings. There is a clear healthcare need to develop and bring to market an effective non-antibiotic strategy for the management of MRSA biofilms on skin and in wounds. Commercial innovation: This proposal offers a disruptive approach to skin and wound biofilm management; repurposing endolysin technology, originally developed for agriculture and food safety, to the infection control and wound care markets. Our highly innovative solution to biofilm management involves a patented endolysin technology that specifically targets S. aureus (including MRSA), thus strengthening a healthy microbiome without inducing antimicrobial resistance. Our study in brief: Our innovative project will test the suitability of endolysin technology for the selective management of S. aureus in skin and wound biofilms. Part 1 will confirm endolysin specificity against S. aureus versus a panel of wound-derived bacteria (membrane biofilms). Part 2 will test endolysin selectivity and efficacy against MRSA in mixed-species biofilms using our state-of-the-art human skin/wound biofilm model. In Part 3 an in vivo pilot study will be performed to support follow-on substantive translational funding applications. Evaluating success: Success will be measured against carefully designed work-package-linked project milestones. Clinical applicability will be maximised through the use of highly validated translational models with robust readout parameters.
Collaborator Contribution University of Hull: Ongoing development and application of biofilm-relevant wound models. Cica Biomedical Ltd: Provision of industry insight into biofilm wound models and identification of additional partner opportunities.
Impact Follow-on funding. The collaboration is multi-disciplinary combining in vitro, ex vivo and in vivo biofilm wound models. Feedback from academic: In this POC, we investigated the selectivity and efficacy of a novel bacteriophage-derived endolysin targeted against S. aureus. We demonstrated that this endolysin was potently effective against methicillin-susceptible and methicillin-resistant strains in single and mixed species biofilms, both in vitro and in our novel living human skin wound model. To determine the selectivity and efficacy of endolysin in a full microbiome system, we turned to our porcine wound model. Crucially, we found that endolysin was selective against S. aureus without depleting the resident microbiome. The successful completion of this POC has demonstrated the potent and selective efficacy of XZ.700 in preventing MRSA biofilm growth in vitro and in human ex vivo skin wounds. In addition, we provide novel, exciting data to show that XZ.700 can inhibit endogenous S. aureus growth in porcine wounds in vivo with no negative effects on healing. Indeed, these data have provided important preclinical information that will be used to aid the design of follow-on porcine wound studies and a first-in-man clinical study to assess the efficacy of XZ.700 in chronic wounds. Future work: The next steps of this work are to perform follow-on experiments to confirm efficacy and selectivity in our real-world porcine skin microbiome model, testing several treatment regimens that are clinically meaningful. We also plan to perform further experiments using living human skin to assess the effects of endolysin on host-bacterial interactions. Together, these data will provide a preclinical package that will inform follow-on clinical studies. We are currently preparing our first manuscript with Cica Biomedical Ltd and Micreos Pharma, focussing on the porcine skin/wound model. We are also planning to perform follow-on porcine wound experiments to test a number of treatment regimens that will be more relevant to the clinic (e.g. delaying starting treatment, combining with debridement etc), which will be directly funded by Micreos Pharma. As the human skin wound model did not reveal any clear healing effects, we are in discussions with Micreos Pharma about potential follow-on work that will allow us to better determine the efficacy of XZ.700 in this model. However, the focus at this time is the porcine wound experiments. Finally, we have applied for the NBIC CTP funding round (2022) to enable us to continue our industry-academic collaborations with Cica and Micreos. This will allow us to focus more on the mode-of-action of novel endolysins in the context of wound healing, and better understand the role of antimicrobial resistant S. aureus in chronic wound healing. We are also in discussions with Cica Biomedical Ltd. about other funding opportunities (e.g. Knowledge Transfer Partnerships) and utilising our porcine microbiome model for other industry partnerships.
Start Year 2021
 
Description NBIC POC 04POC21-228 Endolysin technology for selective management of MRSA biofilms on skin and wounds. (Holly Wilkinson) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution The objective of this project is to determine the efficacy of a novel endolysin for the selective prevention and management of S. aureus biofilms on skin and in wounds. Current approaches: Despite extensive research and policy implementation, methicillin-resistant S. aureus (MRSA) continues to prove a major infection control challenge in the clinical setting, with outbreaks common. This is despite routine patient screening, strict infection control procedures and extensive use of systemic antibiotics/topical antimicrobials. Recent evidence reveals the importance of S. aureus biofilms in the pathogenesis of human chronic wounds, an area where treatment is dominated by low cost, largely ineffective wound dressings. There is a clear healthcare need to develop and bring to market an effective non-antibiotic strategy for the management of MRSA biofilms on skin and in wounds. Commercial innovation: This proposal offers a disruptive approach to skin and wound biofilm management; repurposing endolysin technology, originally developed for agriculture and food safety, to the infection control and wound care markets. Our highly innovative solution to biofilm management involves a patented endolysin technology that specifically targets S. aureus (including MRSA), thus strengthening a healthy microbiome without inducing antimicrobial resistance. Our study in brief: Our innovative project will test the suitability of endolysin technology for the selective management of S. aureus in skin and wound biofilms. Part 1 will confirm endolysin specificity against S. aureus versus a panel of wound-derived bacteria (membrane biofilms). Part 2 will test endolysin selectivity and efficacy against MRSA in mixed-species biofilms using our state-of-the-art human skin/wound biofilm model. In Part 3 an in vivo pilot study will be performed to support follow-on substantive translational funding applications. Evaluating success: Success will be measured against carefully designed work-package-linked project milestones. Clinical applicability will be maximised through the use of highly validated translational models with robust readout parameters.
Collaborator Contribution University of Hull: Ongoing development and application of biofilm-relevant wound models. Cica Biomedical Ltd: Provision of industry insight into biofilm wound models and identification of additional partner opportunities.
Impact Follow-on funding. The collaboration is multi-disciplinary combining in vitro, ex vivo and in vivo biofilm wound models. Feedback from academic: In this POC, we investigated the selectivity and efficacy of a novel bacteriophage-derived endolysin targeted against S. aureus. We demonstrated that this endolysin was potently effective against methicillin-susceptible and methicillin-resistant strains in single and mixed species biofilms, both in vitro and in our novel living human skin wound model. To determine the selectivity and efficacy of endolysin in a full microbiome system, we turned to our porcine wound model. Crucially, we found that endolysin was selective against S. aureus without depleting the resident microbiome. The successful completion of this POC has demonstrated the potent and selective efficacy of XZ.700 in preventing MRSA biofilm growth in vitro and in human ex vivo skin wounds. In addition, we provide novel, exciting data to show that XZ.700 can inhibit endogenous S. aureus growth in porcine wounds in vivo with no negative effects on healing. Indeed, these data have provided important preclinical information that will be used to aid the design of follow-on porcine wound studies and a first-in-man clinical study to assess the efficacy of XZ.700 in chronic wounds. Future work: The next steps of this work are to perform follow-on experiments to confirm efficacy and selectivity in our real-world porcine skin microbiome model, testing several treatment regimens that are clinically meaningful. We also plan to perform further experiments using living human skin to assess the effects of endolysin on host-bacterial interactions. Together, these data will provide a preclinical package that will inform follow-on clinical studies. We are currently preparing our first manuscript with Cica Biomedical Ltd and Micreos Pharma, focussing on the porcine skin/wound model. We are also planning to perform follow-on porcine wound experiments to test a number of treatment regimens that will be more relevant to the clinic (e.g. delaying starting treatment, combining with debridement etc), which will be directly funded by Micreos Pharma. As the human skin wound model did not reveal any clear healing effects, we are in discussions with Micreos Pharma about potential follow-on work that will allow us to better determine the efficacy of XZ.700 in this model. However, the focus at this time is the porcine wound experiments. Finally, we have applied for the NBIC CTP funding round (2022) to enable us to continue our industry-academic collaborations with Cica and Micreos. This will allow us to focus more on the mode-of-action of novel endolysins in the context of wound healing, and better understand the role of antimicrobial resistant S. aureus in chronic wound healing. We are also in discussions with Cica Biomedical Ltd. about other funding opportunities (e.g. Knowledge Transfer Partnerships) and utilising our porcine microbiome model for other industry partnerships.
Start Year 2021
 
Description NBIC POC 04POC21-235 Targeted Protein Payload Dispersal of Vaginal Biofilms. (Ryan Kean) 
Organisation CC Biotech
Country United Kingdom 
Sector Private 
PI Contribution This project will evaluate the efficacy of endolysins, a novel and targeted antimicrobial therapy, against a chronic vaginal infection known as bacterial vaginosis (BV). BV is the most common vaginal infection of women of childbearing age. It occurs through the overgrowth of a number of anaerobic pathogens, which often grow as a recalcitrant biofilm, making it difficult to fully eradicate. Endolysins represent exciting new therapeutics against this condition. Endolysins are bacteriophage-derived enzymes featuring highly potent and specific activity profiles, selectively killing bacteria at the species level through the rapid breakdown of bacterial peptidoglycan. These targeted properties render endolysins as ideal candidates for the modulation of the ecology of microbiome environments. In this project, we aim to investigate the capacity of endolysins to selectively alter the composition of a complex vaginal microbiome model. By solely removing pathogens associated with BV, it is hypothesized that this will promote growth of the healthy commensal microbiome. Endolysins will be investigated as clinical therapies for the treatment and management of vaginal dysbiosis, such as BV. To assess the effects of endolysins, we aim to develop both a novel multispecies BV biofilm model and an analytical tool known as quantitative microbiome profiling (QMP), which has application for studying both in vitro and naturally occurring biofilms, well exceeding the scope of clinical research. The USP of our project is that these tools will be developed and optimized, whilst concomitantly assessing the efficacy of a novel and first-in-class therapeutic. Success will be measured through the generation of marketable data for the industrial partner and through the leverage of future funding for both the academic and industrial partner. This project aligns with the overall philosophy of NBIC, where a multidisciplinary team combining expertise of biofilms, synthetic biology and medicinal chemistry form a close collaboration between academia and industry.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: This was a brilliant catalyst to start what we hope to be a promising and fruitful collaboration between both the clinical and academic partners on the project. In this project, we have effectively developed a novel 4-species bacterial-vaginosis (BV) associated biofilm model for high-throughput in vitro testing. The model comprises four commonly isolated BV associated pathobionts, namely Gardnerella vaginalis, Fannyhessea vaginae, Prevotella bivia and Mobiluncus curtisii which provides a more complex system for antimicrobial testing in comparison with commonly used monospecies models. Organisms are cultured together in a 'G. vaginalis primed system', whereby this organism is allowed to colonise for 24 hours, followed by addition of remaining pathogens. This mimics the current understanding of BV-associated biofilms, with G. vaginalis thought to be the initial binding organism which displaces commensal lactobacilli and allows the growth of more fastidious anaerobes. We have adapted existing species-specific qPCR primers for routine in vitro use, allowing us to comprehensively study the composition shifts of polymicrobial biofilms with and without treatment. This protocol was combined with PMAxx treatment to discriminate between total and viable cells within the model. Using this protocol, all species were found to colonise the biofilm to varying degrees, with G. vaginalis being the most abundant, followed by F. vaginae, P. bivia and M. curtisii. Having developed a clinically relevant and reproducible polymicrobial biofilm model, we next investigated the efficacy of current BV therapies. This included conventional antibiotics (clindamycin, metronidazole) and a lactobacilli probiotic cocktail. Using a live/dead PMAxx protocol, we investigated the impact of each therapy on the total and viable levels of each bacterium within the model. We show that antibiotic therapy had limited impact on any species within this model, which included both metronidazole and clindamycin at 1x and 8x planktonic minimum inhibitory concentrations (pMICs) based off of G. vaginalis. In contrast, addition of a 4-species lactobacilli cocktail (comprising Lactobacillus crispatus, L. jensenii, L. inners, L. gasseri) significantly reduced the viable levels of G. vaginalis, F. vaginae and M. curtisii, and lowered supernatant pH in comparison with media only controls. For lactobacilli treatment, we were unable to discriminate each species using qPCR given the short amplicon sizes required. Therefore, we employed the use of full-length 16S sequencing using the Oxford Nanopore minION device. Sequencing was combined with PMAxx therapy, which to our knowledge is the first time this platform has been adapted and optimised for live/dead composition of in vitro biofilm models. Finally, we assessed a library of novel engineered phage protein endolysins specific for G. vaginalis, which were uniquely designed from the industrial partner. These proteins were developed by CC Biotech Ltd.'s proprietary discovery platform, Zeus. Five candidates were supplied in-kind by the company. Of these, four were found to be bioactive against the target pathogen G. vaginalis planktonically. After discussions with CC Biotech Ltd., we selected one candidate for continued testing using the aforementioned in vitro model. This candidate was selected based off of producing novel data whilst maximising potential commercial benefit. The selected candidate, CCB7.1, was found to significantly reduce viable levels of G. vaginalis but did not alter the total levels of this organism at 1x, 2x and 4x pMIC. This represented a 1-2 log reduction in viable G. vaginalis at all tested concentrations. Although reduced, G. vaginalis remained viable at ˜1x105 - 1x106 CFE/mL suggesting that biofilm penetration remains a potential hurdle for these enzymes. Assessment of other 'non-target' species demonstrated a reduction in viable M. curtisii at the same concentration , suggesting that eliminating G. vaginalis can disrupt the biofilm architecture which may have a tentative effect at reducing other pathobionts. We have developed a reproducible and clinically relevant in vitro BV-associated biofilm model for pre-clinical screening of novel therapies. During this project we have also optimised an in-house pipeline for robust characterisation of complex in vitro biofilms, including a unique live/dead sequencing protocol using the Oxford Nanopore minION device. Assessing the efficacy of engineered phage endolysins, we demonstrate that a range of these proteins are bioactive against G. vaginalis planktonically. Against biofilms, we observed a significant reduction in viable levels of G. vaginalis although it should be noted that this organism remained viable at ˜1x106 CFE/mL. As such, effective biofilm penetration is one potential hurdle for these enzymes. Further work: The data generated from this project has been used to secure £51,977 in funding from Ferring Pharmaceuticals to Glasgow Caledonian University, to investigate probiotic therapies against the BV model which was designed in this project. It is anticipated that future work packages will be follow on from this initial 5-month project. Additionally, some of the preliminary data from this project was used to support an Innovate UK Biomedical Catalyst grant lead by CC Biotech Ltd. and supported by Glasgow Caledonian and University of Glasgow (£631,531). Overall, the application scored very well with 82.2%, however fell just short of the 84% being required to progress to interview. A further submission for this call has been submitted on 24 May 2022, with additional data generated in this project being used to address some of the concerns/feedback from the initial application. Feedback will be shared by the beginning of September. RK has utilised the preliminary data from the model development aspect of this project as the basis of grant submission to the Academy of Medical Sciences Springboard round 8 (£99,997), looking at drug repurposing to combat BV infections. NBIC very kindly supplied a letter of support for this submission. Work from this project has also been submitted for as an abstract at the Eurobiofilms 2022 conference in Mallorca, Spain. This has been accepted as a poster presentation. We aim to compile our findings and submit to an impactful biofilm journal by the end of August 2022. Furthermore, given the versatility of the drug discovery platform from CC Biotech Ltd., discussions are on-going about further collaborative projects between the partners in alternative areas of infectious disease and microbiome augmentation.
Start Year 2021
 
Description NBIC POC 04POC21-235 Targeted Protein Payload Dispersal of Vaginal Biofilms. (Ryan Kean) 
Organisation Glasgow Caledonian University
Country United Kingdom 
Sector Academic/University 
PI Contribution This project will evaluate the efficacy of endolysins, a novel and targeted antimicrobial therapy, against a chronic vaginal infection known as bacterial vaginosis (BV). BV is the most common vaginal infection of women of childbearing age. It occurs through the overgrowth of a number of anaerobic pathogens, which often grow as a recalcitrant biofilm, making it difficult to fully eradicate. Endolysins represent exciting new therapeutics against this condition. Endolysins are bacteriophage-derived enzymes featuring highly potent and specific activity profiles, selectively killing bacteria at the species level through the rapid breakdown of bacterial peptidoglycan. These targeted properties render endolysins as ideal candidates for the modulation of the ecology of microbiome environments. In this project, we aim to investigate the capacity of endolysins to selectively alter the composition of a complex vaginal microbiome model. By solely removing pathogens associated with BV, it is hypothesized that this will promote growth of the healthy commensal microbiome. Endolysins will be investigated as clinical therapies for the treatment and management of vaginal dysbiosis, such as BV. To assess the effects of endolysins, we aim to develop both a novel multispecies BV biofilm model and an analytical tool known as quantitative microbiome profiling (QMP), which has application for studying both in vitro and naturally occurring biofilms, well exceeding the scope of clinical research. The USP of our project is that these tools will be developed and optimized, whilst concomitantly assessing the efficacy of a novel and first-in-class therapeutic. Success will be measured through the generation of marketable data for the industrial partner and through the leverage of future funding for both the academic and industrial partner. This project aligns with the overall philosophy of NBIC, where a multidisciplinary team combining expertise of biofilms, synthetic biology and medicinal chemistry form a close collaboration between academia and industry.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: This was a brilliant catalyst to start what we hope to be a promising and fruitful collaboration between both the clinical and academic partners on the project. In this project, we have effectively developed a novel 4-species bacterial-vaginosis (BV) associated biofilm model for high-throughput in vitro testing. The model comprises four commonly isolated BV associated pathobionts, namely Gardnerella vaginalis, Fannyhessea vaginae, Prevotella bivia and Mobiluncus curtisii which provides a more complex system for antimicrobial testing in comparison with commonly used monospecies models. Organisms are cultured together in a 'G. vaginalis primed system', whereby this organism is allowed to colonise for 24 hours, followed by addition of remaining pathogens. This mimics the current understanding of BV-associated biofilms, with G. vaginalis thought to be the initial binding organism which displaces commensal lactobacilli and allows the growth of more fastidious anaerobes. We have adapted existing species-specific qPCR primers for routine in vitro use, allowing us to comprehensively study the composition shifts of polymicrobial biofilms with and without treatment. This protocol was combined with PMAxx treatment to discriminate between total and viable cells within the model. Using this protocol, all species were found to colonise the biofilm to varying degrees, with G. vaginalis being the most abundant, followed by F. vaginae, P. bivia and M. curtisii. Having developed a clinically relevant and reproducible polymicrobial biofilm model, we next investigated the efficacy of current BV therapies. This included conventional antibiotics (clindamycin, metronidazole) and a lactobacilli probiotic cocktail. Using a live/dead PMAxx protocol, we investigated the impact of each therapy on the total and viable levels of each bacterium within the model. We show that antibiotic therapy had limited impact on any species within this model, which included both metronidazole and clindamycin at 1x and 8x planktonic minimum inhibitory concentrations (pMICs) based off of G. vaginalis. In contrast, addition of a 4-species lactobacilli cocktail (comprising Lactobacillus crispatus, L. jensenii, L. inners, L. gasseri) significantly reduced the viable levels of G. vaginalis, F. vaginae and M. curtisii, and lowered supernatant pH in comparison with media only controls. For lactobacilli treatment, we were unable to discriminate each species using qPCR given the short amplicon sizes required. Therefore, we employed the use of full-length 16S sequencing using the Oxford Nanopore minION device. Sequencing was combined with PMAxx therapy, which to our knowledge is the first time this platform has been adapted and optimised for live/dead composition of in vitro biofilm models. Finally, we assessed a library of novel engineered phage protein endolysins specific for G. vaginalis, which were uniquely designed from the industrial partner. These proteins were developed by CC Biotech Ltd.'s proprietary discovery platform, Zeus. Five candidates were supplied in-kind by the company. Of these, four were found to be bioactive against the target pathogen G. vaginalis planktonically. After discussions with CC Biotech Ltd., we selected one candidate for continued testing using the aforementioned in vitro model. This candidate was selected based off of producing novel data whilst maximising potential commercial benefit. The selected candidate, CCB7.1, was found to significantly reduce viable levels of G. vaginalis but did not alter the total levels of this organism at 1x, 2x and 4x pMIC. This represented a 1-2 log reduction in viable G. vaginalis at all tested concentrations. Although reduced, G. vaginalis remained viable at ˜1x105 - 1x106 CFE/mL suggesting that biofilm penetration remains a potential hurdle for these enzymes. Assessment of other 'non-target' species demonstrated a reduction in viable M. curtisii at the same concentration , suggesting that eliminating G. vaginalis can disrupt the biofilm architecture which may have a tentative effect at reducing other pathobionts. We have developed a reproducible and clinically relevant in vitro BV-associated biofilm model for pre-clinical screening of novel therapies. During this project we have also optimised an in-house pipeline for robust characterisation of complex in vitro biofilms, including a unique live/dead sequencing protocol using the Oxford Nanopore minION device. Assessing the efficacy of engineered phage endolysins, we demonstrate that a range of these proteins are bioactive against G. vaginalis planktonically. Against biofilms, we observed a significant reduction in viable levels of G. vaginalis although it should be noted that this organism remained viable at ˜1x106 CFE/mL. As such, effective biofilm penetration is one potential hurdle for these enzymes. Further work: The data generated from this project has been used to secure £51,977 in funding from Ferring Pharmaceuticals to Glasgow Caledonian University, to investigate probiotic therapies against the BV model which was designed in this project. It is anticipated that future work packages will be follow on from this initial 5-month project. Additionally, some of the preliminary data from this project was used to support an Innovate UK Biomedical Catalyst grant lead by CC Biotech Ltd. and supported by Glasgow Caledonian and University of Glasgow (£631,531). Overall, the application scored very well with 82.2%, however fell just short of the 84% being required to progress to interview. A further submission for this call has been submitted on 24 May 2022, with additional data generated in this project being used to address some of the concerns/feedback from the initial application. Feedback will be shared by the beginning of September. RK has utilised the preliminary data from the model development aspect of this project as the basis of grant submission to the Academy of Medical Sciences Springboard round 8 (£99,997), looking at drug repurposing to combat BV infections. NBIC very kindly supplied a letter of support for this submission. Work from this project has also been submitted for as an abstract at the Eurobiofilms 2022 conference in Mallorca, Spain. This has been accepted as a poster presentation. We aim to compile our findings and submit to an impactful biofilm journal by the end of August 2022. Furthermore, given the versatility of the drug discovery platform from CC Biotech Ltd., discussions are on-going about further collaborative projects between the partners in alternative areas of infectious disease and microbiome augmentation.
Start Year 2021
 
Description NBIC POC 04POC21-235 Targeted Protein Payload Dispersal of Vaginal Biofilms. (Ryan Kean) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This project will evaluate the efficacy of endolysins, a novel and targeted antimicrobial therapy, against a chronic vaginal infection known as bacterial vaginosis (BV). BV is the most common vaginal infection of women of childbearing age. It occurs through the overgrowth of a number of anaerobic pathogens, which often grow as a recalcitrant biofilm, making it difficult to fully eradicate. Endolysins represent exciting new therapeutics against this condition. Endolysins are bacteriophage-derived enzymes featuring highly potent and specific activity profiles, selectively killing bacteria at the species level through the rapid breakdown of bacterial peptidoglycan. These targeted properties render endolysins as ideal candidates for the modulation of the ecology of microbiome environments. In this project, we aim to investigate the capacity of endolysins to selectively alter the composition of a complex vaginal microbiome model. By solely removing pathogens associated with BV, it is hypothesized that this will promote growth of the healthy commensal microbiome. Endolysins will be investigated as clinical therapies for the treatment and management of vaginal dysbiosis, such as BV. To assess the effects of endolysins, we aim to develop both a novel multispecies BV biofilm model and an analytical tool known as quantitative microbiome profiling (QMP), which has application for studying both in vitro and naturally occurring biofilms, well exceeding the scope of clinical research. The USP of our project is that these tools will be developed and optimized, whilst concomitantly assessing the efficacy of a novel and first-in-class therapeutic. Success will be measured through the generation of marketable data for the industrial partner and through the leverage of future funding for both the academic and industrial partner. This project aligns with the overall philosophy of NBIC, where a multidisciplinary team combining expertise of biofilms, synthetic biology and medicinal chemistry form a close collaboration between academia and industry.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: This was a brilliant catalyst to start what we hope to be a promising and fruitful collaboration between both the clinical and academic partners on the project. In this project, we have effectively developed a novel 4-species bacterial-vaginosis (BV) associated biofilm model for high-throughput in vitro testing. The model comprises four commonly isolated BV associated pathobionts, namely Gardnerella vaginalis, Fannyhessea vaginae, Prevotella bivia and Mobiluncus curtisii which provides a more complex system for antimicrobial testing in comparison with commonly used monospecies models. Organisms are cultured together in a 'G. vaginalis primed system', whereby this organism is allowed to colonise for 24 hours, followed by addition of remaining pathogens. This mimics the current understanding of BV-associated biofilms, with G. vaginalis thought to be the initial binding organism which displaces commensal lactobacilli and allows the growth of more fastidious anaerobes. We have adapted existing species-specific qPCR primers for routine in vitro use, allowing us to comprehensively study the composition shifts of polymicrobial biofilms with and without treatment. This protocol was combined with PMAxx treatment to discriminate between total and viable cells within the model. Using this protocol, all species were found to colonise the biofilm to varying degrees, with G. vaginalis being the most abundant, followed by F. vaginae, P. bivia and M. curtisii. Having developed a clinically relevant and reproducible polymicrobial biofilm model, we next investigated the efficacy of current BV therapies. This included conventional antibiotics (clindamycin, metronidazole) and a lactobacilli probiotic cocktail. Using a live/dead PMAxx protocol, we investigated the impact of each therapy on the total and viable levels of each bacterium within the model. We show that antibiotic therapy had limited impact on any species within this model, which included both metronidazole and clindamycin at 1x and 8x planktonic minimum inhibitory concentrations (pMICs) based off of G. vaginalis. In contrast, addition of a 4-species lactobacilli cocktail (comprising Lactobacillus crispatus, L. jensenii, L. inners, L. gasseri) significantly reduced the viable levels of G. vaginalis, F. vaginae and M. curtisii, and lowered supernatant pH in comparison with media only controls. For lactobacilli treatment, we were unable to discriminate each species using qPCR given the short amplicon sizes required. Therefore, we employed the use of full-length 16S sequencing using the Oxford Nanopore minION device. Sequencing was combined with PMAxx therapy, which to our knowledge is the first time this platform has been adapted and optimised for live/dead composition of in vitro biofilm models. Finally, we assessed a library of novel engineered phage protein endolysins specific for G. vaginalis, which were uniquely designed from the industrial partner. These proteins were developed by CC Biotech Ltd.'s proprietary discovery platform, Zeus. Five candidates were supplied in-kind by the company. Of these, four were found to be bioactive against the target pathogen G. vaginalis planktonically. After discussions with CC Biotech Ltd., we selected one candidate for continued testing using the aforementioned in vitro model. This candidate was selected based off of producing novel data whilst maximising potential commercial benefit. The selected candidate, CCB7.1, was found to significantly reduce viable levels of G. vaginalis but did not alter the total levels of this organism at 1x, 2x and 4x pMIC. This represented a 1-2 log reduction in viable G. vaginalis at all tested concentrations. Although reduced, G. vaginalis remained viable at ˜1x105 - 1x106 CFE/mL suggesting that biofilm penetration remains a potential hurdle for these enzymes. Assessment of other 'non-target' species demonstrated a reduction in viable M. curtisii at the same concentration , suggesting that eliminating G. vaginalis can disrupt the biofilm architecture which may have a tentative effect at reducing other pathobionts. We have developed a reproducible and clinically relevant in vitro BV-associated biofilm model for pre-clinical screening of novel therapies. During this project we have also optimised an in-house pipeline for robust characterisation of complex in vitro biofilms, including a unique live/dead sequencing protocol using the Oxford Nanopore minION device. Assessing the efficacy of engineered phage endolysins, we demonstrate that a range of these proteins are bioactive against G. vaginalis planktonically. Against biofilms, we observed a significant reduction in viable levels of G. vaginalis although it should be noted that this organism remained viable at ˜1x106 CFE/mL. As such, effective biofilm penetration is one potential hurdle for these enzymes. Further work: The data generated from this project has been used to secure £51,977 in funding from Ferring Pharmaceuticals to Glasgow Caledonian University, to investigate probiotic therapies against the BV model which was designed in this project. It is anticipated that future work packages will be follow on from this initial 5-month project. Additionally, some of the preliminary data from this project was used to support an Innovate UK Biomedical Catalyst grant lead by CC Biotech Ltd. and supported by Glasgow Caledonian and University of Glasgow (£631,531). Overall, the application scored very well with 82.2%, however fell just short of the 84% being required to progress to interview. A further submission for this call has been submitted on 24 May 2022, with additional data generated in this project being used to address some of the concerns/feedback from the initial application. Feedback will be shared by the beginning of September. RK has utilised the preliminary data from the model development aspect of this project as the basis of grant submission to the Academy of Medical Sciences Springboard round 8 (£99,997), looking at drug repurposing to combat BV infections. NBIC very kindly supplied a letter of support for this submission. Work from this project has also been submitted for as an abstract at the Eurobiofilms 2022 conference in Mallorca, Spain. This has been accepted as a poster presentation. We aim to compile our findings and submit to an impactful biofilm journal by the end of August 2022. Furthermore, given the versatility of the drug discovery platform from CC Biotech Ltd., discussions are on-going about further collaborative projects between the partners in alternative areas of infectious disease and microbiome augmentation.
Start Year 2021
 
Description NBIC POC 04POC21-235 Targeted Protein Payload Dispersal of Vaginal Biofilms. (Ryan Kean) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution This project will evaluate the efficacy of endolysins, a novel and targeted antimicrobial therapy, against a chronic vaginal infection known as bacterial vaginosis (BV). BV is the most common vaginal infection of women of childbearing age. It occurs through the overgrowth of a number of anaerobic pathogens, which often grow as a recalcitrant biofilm, making it difficult to fully eradicate. Endolysins represent exciting new therapeutics against this condition. Endolysins are bacteriophage-derived enzymes featuring highly potent and specific activity profiles, selectively killing bacteria at the species level through the rapid breakdown of bacterial peptidoglycan. These targeted properties render endolysins as ideal candidates for the modulation of the ecology of microbiome environments. In this project, we aim to investigate the capacity of endolysins to selectively alter the composition of a complex vaginal microbiome model. By solely removing pathogens associated with BV, it is hypothesized that this will promote growth of the healthy commensal microbiome. Endolysins will be investigated as clinical therapies for the treatment and management of vaginal dysbiosis, such as BV. To assess the effects of endolysins, we aim to develop both a novel multispecies BV biofilm model and an analytical tool known as quantitative microbiome profiling (QMP), which has application for studying both in vitro and naturally occurring biofilms, well exceeding the scope of clinical research. The USP of our project is that these tools will be developed and optimized, whilst concomitantly assessing the efficacy of a novel and first-in-class therapeutic. Success will be measured through the generation of marketable data for the industrial partner and through the leverage of future funding for both the academic and industrial partner. This project aligns with the overall philosophy of NBIC, where a multidisciplinary team combining expertise of biofilms, synthetic biology and medicinal chemistry form a close collaboration between academia and industry.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: This was a brilliant catalyst to start what we hope to be a promising and fruitful collaboration between both the clinical and academic partners on the project. In this project, we have effectively developed a novel 4-species bacterial-vaginosis (BV) associated biofilm model for high-throughput in vitro testing. The model comprises four commonly isolated BV associated pathobionts, namely Gardnerella vaginalis, Fannyhessea vaginae, Prevotella bivia and Mobiluncus curtisii which provides a more complex system for antimicrobial testing in comparison with commonly used monospecies models. Organisms are cultured together in a 'G. vaginalis primed system', whereby this organism is allowed to colonise for 24 hours, followed by addition of remaining pathogens. This mimics the current understanding of BV-associated biofilms, with G. vaginalis thought to be the initial binding organism which displaces commensal lactobacilli and allows the growth of more fastidious anaerobes. We have adapted existing species-specific qPCR primers for routine in vitro use, allowing us to comprehensively study the composition shifts of polymicrobial biofilms with and without treatment. This protocol was combined with PMAxx treatment to discriminate between total and viable cells within the model. Using this protocol, all species were found to colonise the biofilm to varying degrees, with G. vaginalis being the most abundant, followed by F. vaginae, P. bivia and M. curtisii. Having developed a clinically relevant and reproducible polymicrobial biofilm model, we next investigated the efficacy of current BV therapies. This included conventional antibiotics (clindamycin, metronidazole) and a lactobacilli probiotic cocktail. Using a live/dead PMAxx protocol, we investigated the impact of each therapy on the total and viable levels of each bacterium within the model. We show that antibiotic therapy had limited impact on any species within this model, which included both metronidazole and clindamycin at 1x and 8x planktonic minimum inhibitory concentrations (pMICs) based off of G. vaginalis. In contrast, addition of a 4-species lactobacilli cocktail (comprising Lactobacillus crispatus, L. jensenii, L. inners, L. gasseri) significantly reduced the viable levels of G. vaginalis, F. vaginae and M. curtisii, and lowered supernatant pH in comparison with media only controls. For lactobacilli treatment, we were unable to discriminate each species using qPCR given the short amplicon sizes required. Therefore, we employed the use of full-length 16S sequencing using the Oxford Nanopore minION device. Sequencing was combined with PMAxx therapy, which to our knowledge is the first time this platform has been adapted and optimised for live/dead composition of in vitro biofilm models. Finally, we assessed a library of novel engineered phage protein endolysins specific for G. vaginalis, which were uniquely designed from the industrial partner. These proteins were developed by CC Biotech Ltd.'s proprietary discovery platform, Zeus. Five candidates were supplied in-kind by the company. Of these, four were found to be bioactive against the target pathogen G. vaginalis planktonically. After discussions with CC Biotech Ltd., we selected one candidate for continued testing using the aforementioned in vitro model. This candidate was selected based off of producing novel data whilst maximising potential commercial benefit. The selected candidate, CCB7.1, was found to significantly reduce viable levels of G. vaginalis but did not alter the total levels of this organism at 1x, 2x and 4x pMIC. This represented a 1-2 log reduction in viable G. vaginalis at all tested concentrations. Although reduced, G. vaginalis remained viable at ˜1x105 - 1x106 CFE/mL suggesting that biofilm penetration remains a potential hurdle for these enzymes. Assessment of other 'non-target' species demonstrated a reduction in viable M. curtisii at the same concentration , suggesting that eliminating G. vaginalis can disrupt the biofilm architecture which may have a tentative effect at reducing other pathobionts. We have developed a reproducible and clinically relevant in vitro BV-associated biofilm model for pre-clinical screening of novel therapies. During this project we have also optimised an in-house pipeline for robust characterisation of complex in vitro biofilms, including a unique live/dead sequencing protocol using the Oxford Nanopore minION device. Assessing the efficacy of engineered phage endolysins, we demonstrate that a range of these proteins are bioactive against G. vaginalis planktonically. Against biofilms, we observed a significant reduction in viable levels of G. vaginalis although it should be noted that this organism remained viable at ˜1x106 CFE/mL. As such, effective biofilm penetration is one potential hurdle for these enzymes. Further work: The data generated from this project has been used to secure £51,977 in funding from Ferring Pharmaceuticals to Glasgow Caledonian University, to investigate probiotic therapies against the BV model which was designed in this project. It is anticipated that future work packages will be follow on from this initial 5-month project. Additionally, some of the preliminary data from this project was used to support an Innovate UK Biomedical Catalyst grant lead by CC Biotech Ltd. and supported by Glasgow Caledonian and University of Glasgow (£631,531). Overall, the application scored very well with 82.2%, however fell just short of the 84% being required to progress to interview. A further submission for this call has been submitted on 24 May 2022, with additional data generated in this project being used to address some of the concerns/feedback from the initial application. Feedback will be shared by the beginning of September. RK has utilised the preliminary data from the model development aspect of this project as the basis of grant submission to the Academy of Medical Sciences Springboard round 8 (£99,997), looking at drug repurposing to combat BV infections. NBIC very kindly supplied a letter of support for this submission. Work from this project has also been submitted for as an abstract at the Eurobiofilms 2022 conference in Mallorca, Spain. This has been accepted as a poster presentation. We aim to compile our findings and submit to an impactful biofilm journal by the end of August 2022. Furthermore, given the versatility of the drug discovery platform from CC Biotech Ltd., discussions are on-going about further collaborative projects between the partners in alternative areas of infectious disease and microbiome augmentation.
Start Year 2021
 
Description NBIC POC 04POC21-240 Assessing the potential of a recombinant anti-biofilm protein as a cost-effective, environmentally-friendly treatment against souring and biocorrosion. (Julia R. de Rezende) 
Organisation Heriot-Watt University
Country United Kingdom 
Sector Academic/University 
PI Contribution PROTE-OIL aims to assess the efficacy of lactoferrin (Lf) to control microbial biofilms in industrial settings. Lactoferrin is a natural antimicrobial abundantly present in mammal secretions such as milk, tears and sweat, and is shown to effectively prevent biofilm development in healthcare applications. Given its success, lack of toxicity and accessible large-scale production from cheese whey, skim milk or fermentation by fungi, it is a promising clean technology to substitute harsher products for microbial control in industrial environments, thus minimising the negative environmental impacts of both uncontrolled microbial biofilms and the excessive use and production of biocides. However, the applicability of Lf has not been tested beyond human and veterinarian use. Our objective is to assess the efficacy of Lf to control a complex anaerobic microbial community, in particular one causing biogenic hydrogen sulfide (H2S) production, known as souring, and biocorrosion. Souring is a problem in the oil & gas industry, as H2S is toxic, flammable, corrosive and explosive. Although control of similar biofilms is equally important in other industrial processes, wastewater and marine industries, souring and biocorrosion were chosen as target issues for this POC study because of their economic importance in O&G and because success can be measured with various techniques: Planktonic and sessile microbial abundance by quantitative PCR (qPCR) and microscopy; H2S production by spectrometry and sulfate consumption (ion chromatography); Biocorrosion by metal coupon weight loss, environmental scanning electron microscopy (ESEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD); Overall microbial activity (including fermentation) by monitoring the concentration of organic carbon amendment (ion chromatography). Lf will be tested for the prevention of biofilm establishment and for the control of established biofilms. The techniques above will be used to compare these two treatment scenarios against each other and against an untreated control.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-240 Assessing the potential of a recombinant anti-biofilm protein as a cost-effective, environmentally-friendly treatment against souring and biocorrosion. (Julia R. de Rezende) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution PROTE-OIL aims to assess the efficacy of lactoferrin (Lf) to control microbial biofilms in industrial settings. Lactoferrin is a natural antimicrobial abundantly present in mammal secretions such as milk, tears and sweat, and is shown to effectively prevent biofilm development in healthcare applications. Given its success, lack of toxicity and accessible large-scale production from cheese whey, skim milk or fermentation by fungi, it is a promising clean technology to substitute harsher products for microbial control in industrial environments, thus minimising the negative environmental impacts of both uncontrolled microbial biofilms and the excessive use and production of biocides. However, the applicability of Lf has not been tested beyond human and veterinarian use. Our objective is to assess the efficacy of Lf to control a complex anaerobic microbial community, in particular one causing biogenic hydrogen sulfide (H2S) production, known as souring, and biocorrosion. Souring is a problem in the oil & gas industry, as H2S is toxic, flammable, corrosive and explosive. Although control of similar biofilms is equally important in other industrial processes, wastewater and marine industries, souring and biocorrosion were chosen as target issues for this POC study because of their economic importance in O&G and because success can be measured with various techniques: Planktonic and sessile microbial abundance by quantitative PCR (qPCR) and microscopy; H2S production by spectrometry and sulfate consumption (ion chromatography); Biocorrosion by metal coupon weight loss, environmental scanning electron microscopy (ESEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD); Overall microbial activity (including fermentation) by monitoring the concentration of organic carbon amendment (ion chromatography). Lf will be tested for the prevention of biofilm establishment and for the control of established biofilms. The techniques above will be used to compare these two treatment scenarios against each other and against an untreated control.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-240 Assessing the potential of a recombinant anti-biofilm protein as a cost-effective, environmentally-friendly treatment against souring and biocorrosion. (Julia R. de Rezende) 
Organisation Virustatic Shield Ltd
Country United Kingdom 
Sector Private 
PI Contribution PROTE-OIL aims to assess the efficacy of lactoferrin (Lf) to control microbial biofilms in industrial settings. Lactoferrin is a natural antimicrobial abundantly present in mammal secretions such as milk, tears and sweat, and is shown to effectively prevent biofilm development in healthcare applications. Given its success, lack of toxicity and accessible large-scale production from cheese whey, skim milk or fermentation by fungi, it is a promising clean technology to substitute harsher products for microbial control in industrial environments, thus minimising the negative environmental impacts of both uncontrolled microbial biofilms and the excessive use and production of biocides. However, the applicability of Lf has not been tested beyond human and veterinarian use. Our objective is to assess the efficacy of Lf to control a complex anaerobic microbial community, in particular one causing biogenic hydrogen sulfide (H2S) production, known as souring, and biocorrosion. Souring is a problem in the oil & gas industry, as H2S is toxic, flammable, corrosive and explosive. Although control of similar biofilms is equally important in other industrial processes, wastewater and marine industries, souring and biocorrosion were chosen as target issues for this POC study because of their economic importance in O&G and because success can be measured with various techniques: Planktonic and sessile microbial abundance by quantitative PCR (qPCR) and microscopy; H2S production by spectrometry and sulfate consumption (ion chromatography); Biocorrosion by metal coupon weight loss, environmental scanning electron microscopy (ESEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD); Overall microbial activity (including fermentation) by monitoring the concentration of organic carbon amendment (ion chromatography). Lf will be tested for the prevention of biofilm establishment and for the control of established biofilms. The techniques above will be used to compare these two treatment scenarios against each other and against an untreated control.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-243 Developing Novel Antimicrobial Surfaces Preventing Biofilms in the Rail and Transport Industry (Felicity de Cogan) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This 12-month collaborative project will develop a novel and disruptive antimicrobial process, for use on frequently touched rail carriage components. This will enable train franchises to reduce their maintenance costs, increase passenger confidence while also championing public health. Pre-pandemic, studies have shown public transport customers and employees were both significantly more susceptible to infections. Whilst limited management or recognition of this problem existed within rail companies, COVID-19 has highlighted the enormous risk of infection in crowded places and the need for novel technologies to address the problem. Working in collaboration, UoB and NitroPep have developed a technology which removes the pain for rail franchises, all whilst also giving the train companies a reputational advantage through reduced bacterial load, improved hygiene and cleanliness for users. We will develop a fully commercialised product that, when deployed in settings such as transport hubs/vehicles, reduces the numbers of bacteria. Fundamental experimental trials in response to several customer requests have enabled development of a novel antimicrobial product which can be used in trains. In further developing robust commercial offers, we have formed a consortium to bring specific expertise and skills together to generate customer focused product development processes to drive adoption and maximise rapid market traction. The technology is easily adopted by end users and can be retrofitted to all existing rail carriage systems. Completion of this project will demonstrate a surface which has developed to TRL level 6 and is ready for scale up and roll out across the industry.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-243 Developing Novel Antimicrobial Surfaces Preventing Biofilms in the Rail and Transport Industry (Felicity de Cogan) 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution This 12-month collaborative project will develop a novel and disruptive antimicrobial process, for use on frequently touched rail carriage components. This will enable train franchises to reduce their maintenance costs, increase passenger confidence while also championing public health. Pre-pandemic, studies have shown public transport customers and employees were both significantly more susceptible to infections. Whilst limited management or recognition of this problem existed within rail companies, COVID-19 has highlighted the enormous risk of infection in crowded places and the need for novel technologies to address the problem. Working in collaboration, UoB and NitroPep have developed a technology which removes the pain for rail franchises, all whilst also giving the train companies a reputational advantage through reduced bacterial load, improved hygiene and cleanliness for users. We will develop a fully commercialised product that, when deployed in settings such as transport hubs/vehicles, reduces the numbers of bacteria. Fundamental experimental trials in response to several customer requests have enabled development of a novel antimicrobial product which can be used in trains. In further developing robust commercial offers, we have formed a consortium to bring specific expertise and skills together to generate customer focused product development processes to drive adoption and maximise rapid market traction. The technology is easily adopted by end users and can be retrofitted to all existing rail carriage systems. Completion of this project will demonstrate a surface which has developed to TRL level 6 and is ready for scale up and roll out across the industry.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-243 Developing Novel Antimicrobial Surfaces Preventing Biofilms in the Rail and Transport Industry (Felicity de Cogan) 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution This 12-month collaborative project will develop a novel and disruptive antimicrobial process, for use on frequently touched rail carriage components. This will enable train franchises to reduce their maintenance costs, increase passenger confidence while also championing public health. Pre-pandemic, studies have shown public transport customers and employees were both significantly more susceptible to infections. Whilst limited management or recognition of this problem existed within rail companies, COVID-19 has highlighted the enormous risk of infection in crowded places and the need for novel technologies to address the problem. Working in collaboration, UoB and NitroPep have developed a technology which removes the pain for rail franchises, all whilst also giving the train companies a reputational advantage through reduced bacterial load, improved hygiene and cleanliness for users. We will develop a fully commercialised product that, when deployed in settings such as transport hubs/vehicles, reduces the numbers of bacteria. Fundamental experimental trials in response to several customer requests have enabled development of a novel antimicrobial product which can be used in trains. In further developing robust commercial offers, we have formed a consortium to bring specific expertise and skills together to generate customer focused product development processes to drive adoption and maximise rapid market traction. The technology is easily adopted by end users and can be retrofitted to all existing rail carriage systems. Completion of this project will demonstrate a surface which has developed to TRL level 6 and is ready for scale up and roll out across the industry.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-248 Organo-metallic HIPIMS-coated antibiofilm advanced wound dressings (Arutiun Ehiasarian) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution The overall concept of this project is to develop an advanced antibiofilm wound dressing prototype using a low environmental impact High Power Impulse Magnetron Sputtering (HIPIMS) process. The project will have three interlinked objectives: Develop the HIPIMS process to deposit nanoscale silver, copper and zinc metals, along with 5D's patented antibiofilm material T-EDTA onto typical advanced woundcare substrates such as fibrous carboxymethylcellulose and sodium/calcium alginate. Explore the deposition of a range of these organo-metallic antibiofilm materials onto aforementioned woundcare substrates. Evaluate the prototype coated wound dressing materials for physical properties such as absorbency, ASTM based biofilm models, and in realistic wound care conditions to arrive at a 'proof of feasibility' medical device. Successful completion of the primary objectives will result in an initial prototype device that showcases the readiness and suitability of the technology for potential further development funding. It is envisaged that with follow on funding the technology will be commercialised as a low-cost, environmentally friendly, regulatory-ready, 'game changing' antibiofilm wound dressing. The dressing will aim to administer low doses of potent antimicrobial metal ions from robust, nanoscale coatings, some of which are difficult to deploy by other application processes, plus 5D's antibiofilm adjunct based on advanced chelation technology. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. A key feature of this novel antibiofilm system is the coating of difficult to apply mixed metals, using an environmentally friendly 'dry' process. Success will be measured by the development of a prototype wound dressing fabric that satisfies key commercial physical property demands such as mechanical strength and absorbency, and microbiological properties such as AM and AB efficacy (log reduction of 5-7). The developed prototype will enable either further development funding, or commercial co-development.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Sheffield Hallum: The project has demonstrated an advanced antibiofilm wound dressing prototype using a low environmental impact High Power Impulse Magnetron Sputtering (HIPIMS) process. A key feature of this novel antibiofilm system is the HIPIMS coating of difficult to apply mixed metals. The HIPIMS process for deposition was successfully trialled on advanced CMC and alginate wound dressing materials in combination of T-EDTA and DTPA treatments. The prototype coated wound dressing materials demonstrated significant antibiofilm efficacy against single-specie cultures of Pseudomonas aeruginosa and Staphylococcus aureus, achieving total kill in both cases. A lower rate of hydration was observed following the relatively thick HIPIMS coating deposits. Successful completion of the primary objectives would result in an initial prototype device that showcased the readiness and suitability of the technology for potential further development funding. It is envisaged that with follow on funding the technology will be commercialised as a low-cost, environmentally friendly, regulatory-ready, 'game changing' antibiofilm wound dressing. The dressing will aim to administer low doses of potent antimicrobial metal ions from robust, nanoscale coatings, some of which are difficult to deploy by other application processes, plus 5D's antibiofilm adjunct based on advanced chelation technology. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. Next steps: We will publish the results in peer-reviewed journals. We will seek follow on funding for the technology to be commercialised as a low-cost, environmentally friendly, regulatory-ready, 'game changing' antibiofilm wound dressing. Further industry collaboration and grant submissions nationally and internationally are anticipated.
Start Year 2021
 
Description NBIC POC 04POC21-248 Organo-metallic HIPIMS-coated antibiofilm advanced wound dressings (Arutiun Ehiasarian) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall concept of this project is to develop an advanced antibiofilm wound dressing prototype using a low environmental impact High Power Impulse Magnetron Sputtering (HIPIMS) process. The project will have three interlinked objectives: Develop the HIPIMS process to deposit nanoscale silver, copper and zinc metals, along with 5D's patented antibiofilm material T-EDTA onto typical advanced woundcare substrates such as fibrous carboxymethylcellulose and sodium/calcium alginate. Explore the deposition of a range of these organo-metallic antibiofilm materials onto aforementioned woundcare substrates. Evaluate the prototype coated wound dressing materials for physical properties such as absorbency, ASTM based biofilm models, and in realistic wound care conditions to arrive at a 'proof of feasibility' medical device. Successful completion of the primary objectives will result in an initial prototype device that showcases the readiness and suitability of the technology for potential further development funding. It is envisaged that with follow on funding the technology will be commercialised as a low-cost, environmentally friendly, regulatory-ready, 'game changing' antibiofilm wound dressing. The dressing will aim to administer low doses of potent antimicrobial metal ions from robust, nanoscale coatings, some of which are difficult to deploy by other application processes, plus 5D's antibiofilm adjunct based on advanced chelation technology. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. A key feature of this novel antibiofilm system is the coating of difficult to apply mixed metals, using an environmentally friendly 'dry' process. Success will be measured by the development of a prototype wound dressing fabric that satisfies key commercial physical property demands such as mechanical strength and absorbency, and microbiological properties such as AM and AB efficacy (log reduction of 5-7). The developed prototype will enable either further development funding, or commercial co-development.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Sheffield Hallum: The project has demonstrated an advanced antibiofilm wound dressing prototype using a low environmental impact High Power Impulse Magnetron Sputtering (HIPIMS) process. A key feature of this novel antibiofilm system is the HIPIMS coating of difficult to apply mixed metals. The HIPIMS process for deposition was successfully trialled on advanced CMC and alginate wound dressing materials in combination of T-EDTA and DTPA treatments. The prototype coated wound dressing materials demonstrated significant antibiofilm efficacy against single-specie cultures of Pseudomonas aeruginosa and Staphylococcus aureus, achieving total kill in both cases. A lower rate of hydration was observed following the relatively thick HIPIMS coating deposits. Successful completion of the primary objectives would result in an initial prototype device that showcased the readiness and suitability of the technology for potential further development funding. It is envisaged that with follow on funding the technology will be commercialised as a low-cost, environmentally friendly, regulatory-ready, 'game changing' antibiofilm wound dressing. The dressing will aim to administer low doses of potent antimicrobial metal ions from robust, nanoscale coatings, some of which are difficult to deploy by other application processes, plus 5D's antibiofilm adjunct based on advanced chelation technology. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. Next steps: We will publish the results in peer-reviewed journals. We will seek follow on funding for the technology to be commercialised as a low-cost, environmentally friendly, regulatory-ready, 'game changing' antibiofilm wound dressing. Further industry collaboration and grant submissions nationally and internationally are anticipated.
Start Year 2021
 
Description NBIC POC 04POC21-248 Organo-metallic HIPIMS-coated antibiofilm advanced wound dressings (Arutiun Ehiasarian) 
Organisation Sheffield Hallam University
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall concept of this project is to develop an advanced antibiofilm wound dressing prototype using a low environmental impact High Power Impulse Magnetron Sputtering (HIPIMS) process. The project will have three interlinked objectives: Develop the HIPIMS process to deposit nanoscale silver, copper and zinc metals, along with 5D's patented antibiofilm material T-EDTA onto typical advanced woundcare substrates such as fibrous carboxymethylcellulose and sodium/calcium alginate. Explore the deposition of a range of these organo-metallic antibiofilm materials onto aforementioned woundcare substrates. Evaluate the prototype coated wound dressing materials for physical properties such as absorbency, ASTM based biofilm models, and in realistic wound care conditions to arrive at a 'proof of feasibility' medical device. Successful completion of the primary objectives will result in an initial prototype device that showcases the readiness and suitability of the technology for potential further development funding. It is envisaged that with follow on funding the technology will be commercialised as a low-cost, environmentally friendly, regulatory-ready, 'game changing' antibiofilm wound dressing. The dressing will aim to administer low doses of potent antimicrobial metal ions from robust, nanoscale coatings, some of which are difficult to deploy by other application processes, plus 5D's antibiofilm adjunct based on advanced chelation technology. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. A key feature of this novel antibiofilm system is the coating of difficult to apply mixed metals, using an environmentally friendly 'dry' process. Success will be measured by the development of a prototype wound dressing fabric that satisfies key commercial physical property demands such as mechanical strength and absorbency, and microbiological properties such as AM and AB efficacy (log reduction of 5-7). The developed prototype will enable either further development funding, or commercial co-development.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from Sheffield Hallum: The project has demonstrated an advanced antibiofilm wound dressing prototype using a low environmental impact High Power Impulse Magnetron Sputtering (HIPIMS) process. A key feature of this novel antibiofilm system is the HIPIMS coating of difficult to apply mixed metals. The HIPIMS process for deposition was successfully trialled on advanced CMC and alginate wound dressing materials in combination of T-EDTA and DTPA treatments. The prototype coated wound dressing materials demonstrated significant antibiofilm efficacy against single-specie cultures of Pseudomonas aeruginosa and Staphylococcus aureus, achieving total kill in both cases. A lower rate of hydration was observed following the relatively thick HIPIMS coating deposits. Successful completion of the primary objectives would result in an initial prototype device that showcased the readiness and suitability of the technology for potential further development funding. It is envisaged that with follow on funding the technology will be commercialised as a low-cost, environmentally friendly, regulatory-ready, 'game changing' antibiofilm wound dressing. The dressing will aim to administer low doses of potent antimicrobial metal ions from robust, nanoscale coatings, some of which are difficult to deploy by other application processes, plus 5D's antibiofilm adjunct based on advanced chelation technology. It is anticipated that such a wound dressing would greatly enhance wound healing and consequently provide a significant benefit to patients. Next steps: We will publish the results in peer-reviewed journals. We will seek follow on funding for the technology to be commercialised as a low-cost, environmentally friendly, regulatory-ready, 'game changing' antibiofilm wound dressing. Further industry collaboration and grant submissions nationally and internationally are anticipated.
Start Year 2021
 
Description NBIC POC 04POC21-252 The standard biofilm: A reference measurement system to support routine manipulation, innovation and application. (Jeremy Webb) 
Organisation LGC Ltd
Country Global 
Sector Private 
PI Contribution A critical unmet need for innovation across all industry sectors in which biofilms are relevant is the infrastructure and support needed to demonstrate alignment to relevant standards and the associated technical competencies. This would be, at its simplest, the development of reliable and robust standards and infrastructure to characterise them, to which biofilm technologies and interventions could be benchmarked against one another. Academic-industry discussion both nationally and internationally has consistently identified that a lack of standardisation across biofilm methods which leads to a major block to innovation. While models for culturing biofilms exist (such as the CDC reactor and drip flow models), these models typically evaluate basic conventional techniques such as biomass and CFU counts. However, a major limitation is that they have not been validated for molecular analytics that reflect modern microbiology and the metagenomic methodology often used for biofilm analysis. This project aims to develop the first biofilm reference material which will be metrologically characterised at the molecular level using tools that are not available to in the standard industry laboratories. Academic and industrial communities will be able to use this resource as a tool to evaluate the accuracy of their molecular biofilm measurements. Using expertise from UoS and the NML/LGC we propose to examine whether it is possible to generate reference biofilm material that is reproducibility validated at an interlaboratory/ multi-site (collaborators have agreed to test if required) and can be used by the community at large.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Not yet.
Start Year 2021
 
Description NBIC POC 04POC21-252 The standard biofilm: A reference measurement system to support routine manipulation, innovation and application. (Jeremy Webb) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution A critical unmet need for innovation across all industry sectors in which biofilms are relevant is the infrastructure and support needed to demonstrate alignment to relevant standards and the associated technical competencies. This would be, at its simplest, the development of reliable and robust standards and infrastructure to characterise them, to which biofilm technologies and interventions could be benchmarked against one another. Academic-industry discussion both nationally and internationally has consistently identified that a lack of standardisation across biofilm methods which leads to a major block to innovation. While models for culturing biofilms exist (such as the CDC reactor and drip flow models), these models typically evaluate basic conventional techniques such as biomass and CFU counts. However, a major limitation is that they have not been validated for molecular analytics that reflect modern microbiology and the metagenomic methodology often used for biofilm analysis. This project aims to develop the first biofilm reference material which will be metrologically characterised at the molecular level using tools that are not available to in the standard industry laboratories. Academic and industrial communities will be able to use this resource as a tool to evaluate the accuracy of their molecular biofilm measurements. Using expertise from UoS and the NML/LGC we propose to examine whether it is possible to generate reference biofilm material that is reproducibility validated at an interlaboratory/ multi-site (collaborators have agreed to test if required) and can be used by the community at large.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Not yet.
Start Year 2021
 
Description NBIC POC 04POC21-252 The standard biofilm: A reference measurement system to support routine manipulation, innovation and application. (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution A critical unmet need for innovation across all industry sectors in which biofilms are relevant is the infrastructure and support needed to demonstrate alignment to relevant standards and the associated technical competencies. This would be, at its simplest, the development of reliable and robust standards and infrastructure to characterise them, to which biofilm technologies and interventions could be benchmarked against one another. Academic-industry discussion both nationally and internationally has consistently identified that a lack of standardisation across biofilm methods which leads to a major block to innovation. While models for culturing biofilms exist (such as the CDC reactor and drip flow models), these models typically evaluate basic conventional techniques such as biomass and CFU counts. However, a major limitation is that they have not been validated for molecular analytics that reflect modern microbiology and the metagenomic methodology often used for biofilm analysis. This project aims to develop the first biofilm reference material which will be metrologically characterised at the molecular level using tools that are not available to in the standard industry laboratories. Academic and industrial communities will be able to use this resource as a tool to evaluate the accuracy of their molecular biofilm measurements. Using expertise from UoS and the NML/LGC we propose to examine whether it is possible to generate reference biofilm material that is reproducibility validated at an interlaboratory/ multi-site (collaborators have agreed to test if required) and can be used by the community at large.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Not yet.
Start Year 2021
 
Description NBIC POC 04POC21-255 Novel approach to treat osteomyelitis biofilms combining innovative dual therapy and slow drug release. (Miguel Camara) 
Organisation Ceramisys
Country United Kingdom 
Sector Private 
PI Contribution Osteomyelitis caused by microbial biofilm infections of bone injury or surgery sites affects up to 100 per 100,000 people in the UK, resulting in increased health and social care costs and reduced patient quality of-life. Infections are mainly caused by S. aureus and P. aeruginosa both WHO priority pathogens. Treatments include high doses of antibiotics but it is difficult to cure; up to 30% of patients have recurrent or persistent infections. The main aim of this study is to demonstrate proof-of-concept to treat/prevent osteomyelitis using novel bone grafts containing a combination of antibiotics and quorum sensing inhibitors combined with biodegradable polymer coatings. (Fig1). Ceramysis has developed a tissue-compatible ceramic bone graft composed of hydroxyapatite (HA) and beta-tricalcium phosphate (ß-TCP) to enhance bone regeneration, currently used clinically for bone regeneration in osteomyelitis. Antibiotics mixed with the graft are released too quickly, preventing effective infection control. The University of Nottingham (UoN) has developed P. aeruginosa biofilm models and Quorum Sensing Inhibitors (QSI) that sensitize biofilms to antibiotic killing hence reducing infection. Upperton Pharma Solutions will apply slow-release polymer coatings, containing antibiotics and QSI, to the ceramic bone grafts, enabling optimization of the dose and bioavailability of these compounds in bone wounds to promote bacterial killing and bone healing. Successful delivery will provide proof-of-concept to kill P. aeruginosa biofilms using coated bone grafts, demonstrating slow QSI and antibiotic release with increased biofilm killing through polymer coatings, bringing together novel technologies for the first time, moving the technology from TRL 2 to TRL 3.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-255 Novel approach to treat osteomyelitis biofilms combining innovative dual therapy and slow drug release. (Miguel Camara) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Osteomyelitis caused by microbial biofilm infections of bone injury or surgery sites affects up to 100 per 100,000 people in the UK, resulting in increased health and social care costs and reduced patient quality of-life. Infections are mainly caused by S. aureus and P. aeruginosa both WHO priority pathogens. Treatments include high doses of antibiotics but it is difficult to cure; up to 30% of patients have recurrent or persistent infections. The main aim of this study is to demonstrate proof-of-concept to treat/prevent osteomyelitis using novel bone grafts containing a combination of antibiotics and quorum sensing inhibitors combined with biodegradable polymer coatings. (Fig1). Ceramysis has developed a tissue-compatible ceramic bone graft composed of hydroxyapatite (HA) and beta-tricalcium phosphate (ß-TCP) to enhance bone regeneration, currently used clinically for bone regeneration in osteomyelitis. Antibiotics mixed with the graft are released too quickly, preventing effective infection control. The University of Nottingham (UoN) has developed P. aeruginosa biofilm models and Quorum Sensing Inhibitors (QSI) that sensitize biofilms to antibiotic killing hence reducing infection. Upperton Pharma Solutions will apply slow-release polymer coatings, containing antibiotics and QSI, to the ceramic bone grafts, enabling optimization of the dose and bioavailability of these compounds in bone wounds to promote bacterial killing and bone healing. Successful delivery will provide proof-of-concept to kill P. aeruginosa biofilms using coated bone grafts, demonstrating slow QSI and antibiotic release with increased biofilm killing through polymer coatings, bringing together novel technologies for the first time, moving the technology from TRL 2 to TRL 3.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-255 Novel approach to treat osteomyelitis biofilms combining innovative dual therapy and slow drug release. (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Osteomyelitis caused by microbial biofilm infections of bone injury or surgery sites affects up to 100 per 100,000 people in the UK, resulting in increased health and social care costs and reduced patient quality of-life. Infections are mainly caused by S. aureus and P. aeruginosa both WHO priority pathogens. Treatments include high doses of antibiotics but it is difficult to cure; up to 30% of patients have recurrent or persistent infections. The main aim of this study is to demonstrate proof-of-concept to treat/prevent osteomyelitis using novel bone grafts containing a combination of antibiotics and quorum sensing inhibitors combined with biodegradable polymer coatings. (Fig1). Ceramysis has developed a tissue-compatible ceramic bone graft composed of hydroxyapatite (HA) and beta-tricalcium phosphate (ß-TCP) to enhance bone regeneration, currently used clinically for bone regeneration in osteomyelitis. Antibiotics mixed with the graft are released too quickly, preventing effective infection control. The University of Nottingham (UoN) has developed P. aeruginosa biofilm models and Quorum Sensing Inhibitors (QSI) that sensitize biofilms to antibiotic killing hence reducing infection. Upperton Pharma Solutions will apply slow-release polymer coatings, containing antibiotics and QSI, to the ceramic bone grafts, enabling optimization of the dose and bioavailability of these compounds in bone wounds to promote bacterial killing and bone healing. Successful delivery will provide proof-of-concept to kill P. aeruginosa biofilms using coated bone grafts, demonstrating slow QSI and antibiotic release with increased biofilm killing through polymer coatings, bringing together novel technologies for the first time, moving the technology from TRL 2 to TRL 3.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-255 Novel approach to treat osteomyelitis biofilms combining innovative dual therapy and slow drug release. (Miguel Camara) 
Organisation Upperton Pharma Solutions
Country United Kingdom 
Sector Private 
PI Contribution Osteomyelitis caused by microbial biofilm infections of bone injury or surgery sites affects up to 100 per 100,000 people in the UK, resulting in increased health and social care costs and reduced patient quality of-life. Infections are mainly caused by S. aureus and P. aeruginosa both WHO priority pathogens. Treatments include high doses of antibiotics but it is difficult to cure; up to 30% of patients have recurrent or persistent infections. The main aim of this study is to demonstrate proof-of-concept to treat/prevent osteomyelitis using novel bone grafts containing a combination of antibiotics and quorum sensing inhibitors combined with biodegradable polymer coatings. (Fig1). Ceramysis has developed a tissue-compatible ceramic bone graft composed of hydroxyapatite (HA) and beta-tricalcium phosphate (ß-TCP) to enhance bone regeneration, currently used clinically for bone regeneration in osteomyelitis. Antibiotics mixed with the graft are released too quickly, preventing effective infection control. The University of Nottingham (UoN) has developed P. aeruginosa biofilm models and Quorum Sensing Inhibitors (QSI) that sensitize biofilms to antibiotic killing hence reducing infection. Upperton Pharma Solutions will apply slow-release polymer coatings, containing antibiotics and QSI, to the ceramic bone grafts, enabling optimization of the dose and bioavailability of these compounds in bone wounds to promote bacterial killing and bone healing. Successful delivery will provide proof-of-concept to kill P. aeruginosa biofilms using coated bone grafts, demonstrating slow QSI and antibiotic release with increased biofilm killing through polymer coatings, bringing together novel technologies for the first time, moving the technology from TRL 2 to TRL 3.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-257 Optimizing a pilot-scale Bioelectrochemical System for wastewater treatment using Hartree (optimising bioelectrochemical systems). (Elizabeth Heidrich) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Existing wastewater treatment systems are outdated and energy intensive. Bioelectrochemical systems could revolutionise wastewater treatment by harvesting energy directly from its pollutants. However this experimental technology is expensive and high risk. We will use rigorous modelling and in silico design to optimise a pilot-scale system and prepare for commercialisation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: This project was focused on determining how the use of high performance computing could be applied to the field of microbial electrochemical technologies. With current estimates the time to full-scale deployment of microbial electrochemical technologies to the wastewater treatment industry being 25+ years. Unfortunately due to high input costs, creating multiple identical large-scale bioreactors is out of the question. Therefore running multiple parallel experimental setups to determine optimal layouts and operational parameters becomes unfeasible. This is where we aim to make use of high performance computing to perform multiple parallel simulations in an attempt to determine optimal operational conditions, alongside minor adjustments to reactor layout. Using a developed model for simulation of microbial electrochemical technologies [1], alongside use of the Hartree high performance computing centre, we were able to rapidly simulate designs and operational conditions leading to the equivalent of 5.5 years of experimental data being generated in 26 hours. This data enabled conclusions to be drawn regarding potential operational conditions and setups for large scale operations of microbial electrochemical technologies for wastewater treatment. Although modelling can replace some of the ground work needed for developing these systems, this cannot completely replace experimental work. Further work is needed to be conducted on the experimental setup to fully verify model results. • In an attempt to maximise treatment rates anodes should be extended as far as possible across the domain, doing so will reduced the likelihood of vortices forming in corner regions which should increase overall MEC performance. • Decreasing anode width across the domain does seem to increase vortex formation in the very edge regions of the domain, however due to the rotational speed of these vortices flow becomes stagnant. This leads to a reduced current production and treatment rate, decreasing overall system efficiency. • We have estimated that, although turbulent mixing is critical to increasing reactor performance, when flow speeds are fast we tend to operate at almost peak levels of current production. Due to this increased flow speeds, removal rates are low as caused by the amount of substrate flowing into the domain each second. • Improvements of design can be achieved by including additional "dummy cartridges" made entirely of plastic, these act to reduce the channel width electrochemical cartridges and lead to higher substrate removal rates and current production throughout the domain. These improvements were found to increase system efficiency regardless of hydraulic retention time or influent substrate concentration and can be implemented with very minimal additional costs compared to the cost of an electrochemical cartridge. • This idea of implementing dummy cartridge was first considered when we included additional pairs of electrochemical cartridge. Here we noted a superlinear improvement in both removal and treatment rates for all HRTs and concentrations (Fig 2.) • To test the effect of channel width we considered a design containing 18 total cartridges, here we were able to switch any number of the cartridges off. We expected a linear improvement in terms of removal rates, but in cases with substrate abundance, current density should remain the same, this was determined to be the case, with the exception of the final cartridge caused by the proximity to the effluent region (Fig 3.) • This work has allowed theoretical designs and operational conditions for the preconstructed BEWISe reactors to be tested in a fraction of experimental time. When further funding is obtained to operate these reactors, the optimal setups highlighted within this work will be implemented, further reducing the experimental timeframes. Future work: Further development of the mathematical model will be done to closer replicate the findings within the reactor, including introducing additional substrates and bacterial populations into the model. We have applied for a small internal grant supported by Veolia and NWL to run a limited amount of testing on the physical reactors this modelling was based on. The model results will enable us to set up the reactors and operate them in their optimal conditions, rather than conduct long term tests to find these. Once these initial results are verified, Veolia may invest in this technology at one of its sites where COD load is an issue. Furthermore EH and TW are applying for a much larger EPSRC grant, the work carried out in this grant will help form a basis for that, and we will seek to collaborate with Hartree again.
Start Year 2021
 
Description NBIC POC 04POC21-257 Optimizing a pilot-scale Bioelectrochemical System for wastewater treatment using Hartree (optimising bioelectrochemical systems). (Elizabeth Heidrich) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution Existing wastewater treatment systems are outdated and energy intensive. Bioelectrochemical systems could revolutionise wastewater treatment by harvesting energy directly from its pollutants. However this experimental technology is expensive and high risk. We will use rigorous modelling and in silico design to optimise a pilot-scale system and prepare for commercialisation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: This project was focused on determining how the use of high performance computing could be applied to the field of microbial electrochemical technologies. With current estimates the time to full-scale deployment of microbial electrochemical technologies to the wastewater treatment industry being 25+ years. Unfortunately due to high input costs, creating multiple identical large-scale bioreactors is out of the question. Therefore running multiple parallel experimental setups to determine optimal layouts and operational parameters becomes unfeasible. This is where we aim to make use of high performance computing to perform multiple parallel simulations in an attempt to determine optimal operational conditions, alongside minor adjustments to reactor layout. Using a developed model for simulation of microbial electrochemical technologies [1], alongside use of the Hartree high performance computing centre, we were able to rapidly simulate designs and operational conditions leading to the equivalent of 5.5 years of experimental data being generated in 26 hours. This data enabled conclusions to be drawn regarding potential operational conditions and setups for large scale operations of microbial electrochemical technologies for wastewater treatment. Although modelling can replace some of the ground work needed for developing these systems, this cannot completely replace experimental work. Further work is needed to be conducted on the experimental setup to fully verify model results. • In an attempt to maximise treatment rates anodes should be extended as far as possible across the domain, doing so will reduced the likelihood of vortices forming in corner regions which should increase overall MEC performance. • Decreasing anode width across the domain does seem to increase vortex formation in the very edge regions of the domain, however due to the rotational speed of these vortices flow becomes stagnant. This leads to a reduced current production and treatment rate, decreasing overall system efficiency. • We have estimated that, although turbulent mixing is critical to increasing reactor performance, when flow speeds are fast we tend to operate at almost peak levels of current production. Due to this increased flow speeds, removal rates are low as caused by the amount of substrate flowing into the domain each second. • Improvements of design can be achieved by including additional "dummy cartridges" made entirely of plastic, these act to reduce the channel width electrochemical cartridges and lead to higher substrate removal rates and current production throughout the domain. These improvements were found to increase system efficiency regardless of hydraulic retention time or influent substrate concentration and can be implemented with very minimal additional costs compared to the cost of an electrochemical cartridge. • This idea of implementing dummy cartridge was first considered when we included additional pairs of electrochemical cartridge. Here we noted a superlinear improvement in both removal and treatment rates for all HRTs and concentrations (Fig 2.) • To test the effect of channel width we considered a design containing 18 total cartridges, here we were able to switch any number of the cartridges off. We expected a linear improvement in terms of removal rates, but in cases with substrate abundance, current density should remain the same, this was determined to be the case, with the exception of the final cartridge caused by the proximity to the effluent region (Fig 3.) • This work has allowed theoretical designs and operational conditions for the preconstructed BEWISe reactors to be tested in a fraction of experimental time. When further funding is obtained to operate these reactors, the optimal setups highlighted within this work will be implemented, further reducing the experimental timeframes. Future work: Further development of the mathematical model will be done to closer replicate the findings within the reactor, including introducing additional substrates and bacterial populations into the model. We have applied for a small internal grant supported by Veolia and NWL to run a limited amount of testing on the physical reactors this modelling was based on. The model results will enable us to set up the reactors and operate them in their optimal conditions, rather than conduct long term tests to find these. Once these initial results are verified, Veolia may invest in this technology at one of its sites where COD load is an issue. Furthermore EH and TW are applying for a much larger EPSRC grant, the work carried out in this grant will help form a basis for that, and we will seek to collaborate with Hartree again.
Start Year 2021
 
Description NBIC POC 04POC21-257 Optimizing a pilot-scale Bioelectrochemical System for wastewater treatment using Hartree (optimising bioelectrochemical systems). (Elizabeth Heidrich) 
Organisation Northumbrian Water
Country United Kingdom 
Sector Private 
PI Contribution Existing wastewater treatment systems are outdated and energy intensive. Bioelectrochemical systems could revolutionise wastewater treatment by harvesting energy directly from its pollutants. However this experimental technology is expensive and high risk. We will use rigorous modelling and in silico design to optimise a pilot-scale system and prepare for commercialisation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: This project was focused on determining how the use of high performance computing could be applied to the field of microbial electrochemical technologies. With current estimates the time to full-scale deployment of microbial electrochemical technologies to the wastewater treatment industry being 25+ years. Unfortunately due to high input costs, creating multiple identical large-scale bioreactors is out of the question. Therefore running multiple parallel experimental setups to determine optimal layouts and operational parameters becomes unfeasible. This is where we aim to make use of high performance computing to perform multiple parallel simulations in an attempt to determine optimal operational conditions, alongside minor adjustments to reactor layout. Using a developed model for simulation of microbial electrochemical technologies [1], alongside use of the Hartree high performance computing centre, we were able to rapidly simulate designs and operational conditions leading to the equivalent of 5.5 years of experimental data being generated in 26 hours. This data enabled conclusions to be drawn regarding potential operational conditions and setups for large scale operations of microbial electrochemical technologies for wastewater treatment. Although modelling can replace some of the ground work needed for developing these systems, this cannot completely replace experimental work. Further work is needed to be conducted on the experimental setup to fully verify model results. • In an attempt to maximise treatment rates anodes should be extended as far as possible across the domain, doing so will reduced the likelihood of vortices forming in corner regions which should increase overall MEC performance. • Decreasing anode width across the domain does seem to increase vortex formation in the very edge regions of the domain, however due to the rotational speed of these vortices flow becomes stagnant. This leads to a reduced current production and treatment rate, decreasing overall system efficiency. • We have estimated that, although turbulent mixing is critical to increasing reactor performance, when flow speeds are fast we tend to operate at almost peak levels of current production. Due to this increased flow speeds, removal rates are low as caused by the amount of substrate flowing into the domain each second. • Improvements of design can be achieved by including additional "dummy cartridges" made entirely of plastic, these act to reduce the channel width electrochemical cartridges and lead to higher substrate removal rates and current production throughout the domain. These improvements were found to increase system efficiency regardless of hydraulic retention time or influent substrate concentration and can be implemented with very minimal additional costs compared to the cost of an electrochemical cartridge. • This idea of implementing dummy cartridge was first considered when we included additional pairs of electrochemical cartridge. Here we noted a superlinear improvement in both removal and treatment rates for all HRTs and concentrations (Fig 2.) • To test the effect of channel width we considered a design containing 18 total cartridges, here we were able to switch any number of the cartridges off. We expected a linear improvement in terms of removal rates, but in cases with substrate abundance, current density should remain the same, this was determined to be the case, with the exception of the final cartridge caused by the proximity to the effluent region (Fig 3.) • This work has allowed theoretical designs and operational conditions for the preconstructed BEWISe reactors to be tested in a fraction of experimental time. When further funding is obtained to operate these reactors, the optimal setups highlighted within this work will be implemented, further reducing the experimental timeframes. Future work: Further development of the mathematical model will be done to closer replicate the findings within the reactor, including introducing additional substrates and bacterial populations into the model. We have applied for a small internal grant supported by Veolia and NWL to run a limited amount of testing on the physical reactors this modelling was based on. The model results will enable us to set up the reactors and operate them in their optimal conditions, rather than conduct long term tests to find these. Once these initial results are verified, Veolia may invest in this technology at one of its sites where COD load is an issue. Furthermore EH and TW are applying for a much larger EPSRC grant, the work carried out in this grant will help form a basis for that, and we will seek to collaborate with Hartree again.
Start Year 2021
 
Description NBIC POC 04POC21-257 Optimizing a pilot-scale Bioelectrochemical System for wastewater treatment using Hartree (optimising bioelectrochemical systems). (Elizabeth Heidrich) 
Organisation Science and Technologies Facilities Council (STFC)
Department Hartree Centre
Country United Kingdom 
Sector Academic/University 
PI Contribution Existing wastewater treatment systems are outdated and energy intensive. Bioelectrochemical systems could revolutionise wastewater treatment by harvesting energy directly from its pollutants. However this experimental technology is expensive and high risk. We will use rigorous modelling and in silico design to optimise a pilot-scale system and prepare for commercialisation.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: This project was focused on determining how the use of high performance computing could be applied to the field of microbial electrochemical technologies. With current estimates the time to full-scale deployment of microbial electrochemical technologies to the wastewater treatment industry being 25+ years. Unfortunately due to high input costs, creating multiple identical large-scale bioreactors is out of the question. Therefore running multiple parallel experimental setups to determine optimal layouts and operational parameters becomes unfeasible. This is where we aim to make use of high performance computing to perform multiple parallel simulations in an attempt to determine optimal operational conditions, alongside minor adjustments to reactor layout. Using a developed model for simulation of microbial electrochemical technologies [1], alongside use of the Hartree high performance computing centre, we were able to rapidly simulate designs and operational conditions leading to the equivalent of 5.5 years of experimental data being generated in 26 hours. This data enabled conclusions to be drawn regarding potential operational conditions and setups for large scale operations of microbial electrochemical technologies for wastewater treatment. Although modelling can replace some of the ground work needed for developing these systems, this cannot completely replace experimental work. Further work is needed to be conducted on the experimental setup to fully verify model results. • In an attempt to maximise treatment rates anodes should be extended as far as possible across the domain, doing so will reduced the likelihood of vortices forming in corner regions which should increase overall MEC performance. • Decreasing anode width across the domain does seem to increase vortex formation in the very edge regions of the domain, however due to the rotational speed of these vortices flow becomes stagnant. This leads to a reduced current production and treatment rate, decreasing overall system efficiency. • We have estimated that, although turbulent mixing is critical to increasing reactor performance, when flow speeds are fast we tend to operate at almost peak levels of current production. Due to this increased flow speeds, removal rates are low as caused by the amount of substrate flowing into the domain each second. • Improvements of design can be achieved by including additional "dummy cartridges" made entirely of plastic, these act to reduce the channel width electrochemical cartridges and lead to higher substrate removal rates and current production throughout the domain. These improvements were found to increase system efficiency regardless of hydraulic retention time or influent substrate concentration and can be implemented with very minimal additional costs compared to the cost of an electrochemical cartridge. • This idea of implementing dummy cartridge was first considered when we included additional pairs of electrochemical cartridge. Here we noted a superlinear improvement in both removal and treatment rates for all HRTs and concentrations (Fig 2.) • To test the effect of channel width we considered a design containing 18 total cartridges, here we were able to switch any number of the cartridges off. We expected a linear improvement in terms of removal rates, but in cases with substrate abundance, current density should remain the same, this was determined to be the case, with the exception of the final cartridge caused by the proximity to the effluent region (Fig 3.) • This work has allowed theoretical designs and operational conditions for the preconstructed BEWISe reactors to be tested in a fraction of experimental time. When further funding is obtained to operate these reactors, the optimal setups highlighted within this work will be implemented, further reducing the experimental timeframes. Future work: Further development of the mathematical model will be done to closer replicate the findings within the reactor, including introducing additional substrates and bacterial populations into the model. We have applied for a small internal grant supported by Veolia and NWL to run a limited amount of testing on the physical reactors this modelling was based on. The model results will enable us to set up the reactors and operate them in their optimal conditions, rather than conduct long term tests to find these. Once these initial results are verified, Veolia may invest in this technology at one of its sites where COD load is an issue. Furthermore EH and TW are applying for a much larger EPSRC grant, the work carried out in this grant will help form a basis for that, and we will seek to collaborate with Hartree again.
Start Year 2021
 
Description NBIC POC 04POC21-273 Evaluating the antimicrobial activity of herbal infusions: implications for consumer healthcare and well-being. (Sandra Wilks) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Herbs, teas and other natural products have long been used in traditional Chinese and Indian medicines and are becoming increasingly popular for selfcare, and for use in modern clinical practice. The 2018 NICE and PHE guidelines for coughs states that antibiotics should not be a first line treatment, and that honey and several herbs (such as Pelargonium) were recommended. While there has been growing interest in the use of natural products, there is a need to consider efficacy on biofilms, which are known to be responsible for the majority of chronic infections. Pilot data has already shown that a green tea based infusion (Camellia sinsensis) and a turmeric infusion (Curcuma longa) demonstrated anti-viral activity when tested against coronavirus. Many other herbs and natural products have antimicrobial activity that has been well documented. This project builds upon pilot-data obtained through Pukka and Southampton's collaboration, to explore further the role of herbal teas (hot water infusions) in modifying throat and nasal biofilms, and to understand interplay between key bacterial and viral species involved in upper respiratory tract infection (URTI). Using this existing knowledge, is it possible to find the optimal mix of plant and natural compounds to give maximal antimicrobial activity, which could be used to produce an infusion with preventative and immune-boosting effects? This 7 month project proposes to look at herbal synergistic action based upon the green tea and turmeric data, to increase potency and biological efficacy. A successful project will identify 2 or 3 different combinations, which can then be utilized in the development of a new product at Pukka Herbs Ltd. This data will be useful for obtaining further funding for PhD studentship, large scale patient testing through NIHR or UKRI Innovate product development awards. The long term aim is the development of a 'respiratory ease' infusion.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Not yet.
Start Year 2021
 
Description NBIC POC 04POC21-273 Evaluating the antimicrobial activity of herbal infusions: implications for consumer healthcare and well-being. (Sandra Wilks) 
Organisation Pukka Herbs Ltd
Country United Kingdom 
Sector Private 
PI Contribution Herbs, teas and other natural products have long been used in traditional Chinese and Indian medicines and are becoming increasingly popular for selfcare, and for use in modern clinical practice. The 2018 NICE and PHE guidelines for coughs states that antibiotics should not be a first line treatment, and that honey and several herbs (such as Pelargonium) were recommended. While there has been growing interest in the use of natural products, there is a need to consider efficacy on biofilms, which are known to be responsible for the majority of chronic infections. Pilot data has already shown that a green tea based infusion (Camellia sinsensis) and a turmeric infusion (Curcuma longa) demonstrated anti-viral activity when tested against coronavirus. Many other herbs and natural products have antimicrobial activity that has been well documented. This project builds upon pilot-data obtained through Pukka and Southampton's collaboration, to explore further the role of herbal teas (hot water infusions) in modifying throat and nasal biofilms, and to understand interplay between key bacterial and viral species involved in upper respiratory tract infection (URTI). Using this existing knowledge, is it possible to find the optimal mix of plant and natural compounds to give maximal antimicrobial activity, which could be used to produce an infusion with preventative and immune-boosting effects? This 7 month project proposes to look at herbal synergistic action based upon the green tea and turmeric data, to increase potency and biological efficacy. A successful project will identify 2 or 3 different combinations, which can then be utilized in the development of a new product at Pukka Herbs Ltd. This data will be useful for obtaining further funding for PhD studentship, large scale patient testing through NIHR or UKRI Innovate product development awards. The long term aim is the development of a 'respiratory ease' infusion.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Not yet.
Start Year 2021
 
Description NBIC POC 04POC21-273 Evaluating the antimicrobial activity of herbal infusions: implications for consumer healthcare and well-being. (Sandra Wilks) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Herbs, teas and other natural products have long been used in traditional Chinese and Indian medicines and are becoming increasingly popular for selfcare, and for use in modern clinical practice. The 2018 NICE and PHE guidelines for coughs states that antibiotics should not be a first line treatment, and that honey and several herbs (such as Pelargonium) were recommended. While there has been growing interest in the use of natural products, there is a need to consider efficacy on biofilms, which are known to be responsible for the majority of chronic infections. Pilot data has already shown that a green tea based infusion (Camellia sinsensis) and a turmeric infusion (Curcuma longa) demonstrated anti-viral activity when tested against coronavirus. Many other herbs and natural products have antimicrobial activity that has been well documented. This project builds upon pilot-data obtained through Pukka and Southampton's collaboration, to explore further the role of herbal teas (hot water infusions) in modifying throat and nasal biofilms, and to understand interplay between key bacterial and viral species involved in upper respiratory tract infection (URTI). Using this existing knowledge, is it possible to find the optimal mix of plant and natural compounds to give maximal antimicrobial activity, which could be used to produce an infusion with preventative and immune-boosting effects? This 7 month project proposes to look at herbal synergistic action based upon the green tea and turmeric data, to increase potency and biological efficacy. A successful project will identify 2 or 3 different combinations, which can then be utilized in the development of a new product at Pukka Herbs Ltd. This data will be useful for obtaining further funding for PhD studentship, large scale patient testing through NIHR or UKRI Innovate product development awards. The long term aim is the development of a 'respiratory ease' infusion.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Not yet.
Start Year 2021
 
Description NBIC POC 04POC21-276 Antibiofilm Touch Point Plastics. (Vannessa Goodship) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution The overall concept of this project is to develop an advanced antibiofilm rigid environmentally friendly plastic technology incorporating 5D's patented organo-metallic mixed metal complex (MMC). The project will consist of four main objectives: Develop the means to distribute the micro-powdered MMC into typical thermoplastic polymers (starting with polypropylene). The aim is to investigate and identify the optimum mixing methods for polymer/additive. Produce test plaques generated by typical mass production techniques (i.e. injection moulding, compression moulding). The aim is to generate test samples that are representative of the manufacturing processes of commercial mass production techniques. Characterise the dispersion and disposition of the antibiofilm additive in the polymer. The aim is to understand the stability, distribution and polymer/ additive interfaces and any links back to processing routes. Characterise the antimicrobial and antibiofilm, particularly dry biofilm efficacy of the test parts against a number of commercially available antimicrobial additives. The aim is to benchmark effectiveness against commercial products and modify process/processing accordingly. Successful completion of the primary objectives will result in initial prototype antibiofilm plastics that exhibit at least a 4log reduction in planktonic and biofilm bacterial counts in hydrated models. Reductions in a dry biofilm model would further cement the success. This will showcase the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost, environmentally friendly, 'game changing' antibiofilm environmentally friendly plastic technology. The filled plastics would be processable by typical mass production techniques enabling a huge range of end products to be produced. A potential plastic distributor Resinex, has been identified with interest in commercial applications of the technology. Success will be measured by both technology achievements, and with NBIC support, accelerated commercialisation towards our end user vision.
Collaborator Contribution University of Warwick: Investigations of material science and scale up processing of anti biofilm and additive. Potential application areas (non-medical). 5D Health Protection Group Ltd: Biological testing and guidance. Potential application areas (medical).
Impact Feedback from academic: This proposal explored the development of plastics on which microorganisms will not grow, either in planktonic or biofilm state. These antimicrobial plastics were fabricated by mixing a known antimicrobial additive into a commercial plastic material (polypropylene). The resultant plastics, processable by typical mass production techniques, would enable a huge range of end products across plastics surfaces and touch points in a variety of applications. By utilising a range of pre-mixing, compounding and manufacturing techniques a variety of material formulations were generated and characterised by the team at WMG, University of Warwick. These materials were then tested for antibacterial activity. The biological testing and assessments were undertaken by our collaborators 5D Health Protection Ltd (5D). This produced some interesting results, as we were able to separate a range of processing effects such as mixing types, heat, and shear as well as produce samples by common techniques used commercially. It was also noted that there was a lack of comparable background data widely available linking to plastic formulation due to limited data on testing materials and methods that have been reported in open literature. A wide range of efficacy was found dependant on the material formulation. It was also found that some additional additives impacted negatively on the performance of the antimicrobial additive, reducing its efficacy, while other formulations achieved total kill of the bacteria tested. There were therefore complex material interactions of the material mixtures taking place. Pre-mixing of the additive in certain conditions enabled very fine dispersion to be achieved throughput the sample, while other mixing techniques produced localised or a stratified graduation of dispersion. Once formulated all samples could be easily manufactured by common methods such as extrusion, compression moulding and injection moulding. Total kill of bacteria was achieved at levels of 1% additive or above in polypropylene formulations, indicating that it is not worthwhile to increase the additive content above this level. Further academic questions were also uncovered about the mechanisms of material interactions, and there needs to be more consistent benchmarking across the field for this to take place. Dissemination activity is underway, and a journal paper is being prepared to support further exploitation opportunity in funding application sectors such as electrification as well as healthcare. 1% and 1.5% additive-containing samples gave a greater than 5.6 log reduction in the bacterial count. Exceeding the project targets. Further funding is being sought to extend and exploit both commercial and fundamental questions resulting from the NBIC support. The partnership of academic and industrial interdisciplinary skills worked well to achieve our project aims. Samples were formulated using standard commercially available techniques and then characterised to understand properties such as surface finish and dispersion distribution. These samples were passed to 5D Health Protection Limited for biological assessment. A 1% addition of antimicrobial additive produced total kill in a commercial polypropylene material. A reduction of 5.6 log was achieved which was in excessive of the original 4 log target reduction. Systematic material characterisation of surface microscopy, additive dispersion, and surface roughness was carried out and will be available for other researchers in the field. Negative polypropylene additive interactions were found during the course of this work, suggesting further study of the effect of individual additives in commercial formulations should be further investigated. Future work: There needs to be a range of activity to develop the multiple questions that have developed as a result of this work. First there needs to be PhD level work to further uncover the material interactions that hinder or help the resultant antimicrobial effects in commercial plastic materials. Studentship applications have been submitted. Secondly there needs to be commercially focused development on the formulations that work and achieve a range of kills. Specifically, longer-term efficiency is not known at this point and would need to be part of a larger study looking at service lifetimes and cleaning. Further funding is being sought to increase the industrial impact of this work. A paper and associated data and supplementary data is in preparation to aid further workers in the academic and commercial field.
Start Year 2021
 
Description NBIC POC 04POC21-276 Antibiofilm Touch Point Plastics. (Vannessa Goodship) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall concept of this project is to develop an advanced antibiofilm rigid environmentally friendly plastic technology incorporating 5D's patented organo-metallic mixed metal complex (MMC). The project will consist of four main objectives: Develop the means to distribute the micro-powdered MMC into typical thermoplastic polymers (starting with polypropylene). The aim is to investigate and identify the optimum mixing methods for polymer/additive. Produce test plaques generated by typical mass production techniques (i.e. injection moulding, compression moulding). The aim is to generate test samples that are representative of the manufacturing processes of commercial mass production techniques. Characterise the dispersion and disposition of the antibiofilm additive in the polymer. The aim is to understand the stability, distribution and polymer/ additive interfaces and any links back to processing routes. Characterise the antimicrobial and antibiofilm, particularly dry biofilm efficacy of the test parts against a number of commercially available antimicrobial additives. The aim is to benchmark effectiveness against commercial products and modify process/processing accordingly. Successful completion of the primary objectives will result in initial prototype antibiofilm plastics that exhibit at least a 4log reduction in planktonic and biofilm bacterial counts in hydrated models. Reductions in a dry biofilm model would further cement the success. This will showcase the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost, environmentally friendly, 'game changing' antibiofilm environmentally friendly plastic technology. The filled plastics would be processable by typical mass production techniques enabling a huge range of end products to be produced. A potential plastic distributor Resinex, has been identified with interest in commercial applications of the technology. Success will be measured by both technology achievements, and with NBIC support, accelerated commercialisation towards our end user vision.
Collaborator Contribution University of Warwick: Investigations of material science and scale up processing of anti biofilm and additive. Potential application areas (non-medical). 5D Health Protection Group Ltd: Biological testing and guidance. Potential application areas (medical).
Impact Feedback from academic: This proposal explored the development of plastics on which microorganisms will not grow, either in planktonic or biofilm state. These antimicrobial plastics were fabricated by mixing a known antimicrobial additive into a commercial plastic material (polypropylene). The resultant plastics, processable by typical mass production techniques, would enable a huge range of end products across plastics surfaces and touch points in a variety of applications. By utilising a range of pre-mixing, compounding and manufacturing techniques a variety of material formulations were generated and characterised by the team at WMG, University of Warwick. These materials were then tested for antibacterial activity. The biological testing and assessments were undertaken by our collaborators 5D Health Protection Ltd (5D). This produced some interesting results, as we were able to separate a range of processing effects such as mixing types, heat, and shear as well as produce samples by common techniques used commercially. It was also noted that there was a lack of comparable background data widely available linking to plastic formulation due to limited data on testing materials and methods that have been reported in open literature. A wide range of efficacy was found dependant on the material formulation. It was also found that some additional additives impacted negatively on the performance of the antimicrobial additive, reducing its efficacy, while other formulations achieved total kill of the bacteria tested. There were therefore complex material interactions of the material mixtures taking place. Pre-mixing of the additive in certain conditions enabled very fine dispersion to be achieved throughput the sample, while other mixing techniques produced localised or a stratified graduation of dispersion. Once formulated all samples could be easily manufactured by common methods such as extrusion, compression moulding and injection moulding. Total kill of bacteria was achieved at levels of 1% additive or above in polypropylene formulations, indicating that it is not worthwhile to increase the additive content above this level. Further academic questions were also uncovered about the mechanisms of material interactions, and there needs to be more consistent benchmarking across the field for this to take place. Dissemination activity is underway, and a journal paper is being prepared to support further exploitation opportunity in funding application sectors such as electrification as well as healthcare. 1% and 1.5% additive-containing samples gave a greater than 5.6 log reduction in the bacterial count. Exceeding the project targets. Further funding is being sought to extend and exploit both commercial and fundamental questions resulting from the NBIC support. The partnership of academic and industrial interdisciplinary skills worked well to achieve our project aims. Samples were formulated using standard commercially available techniques and then characterised to understand properties such as surface finish and dispersion distribution. These samples were passed to 5D Health Protection Limited for biological assessment. A 1% addition of antimicrobial additive produced total kill in a commercial polypropylene material. A reduction of 5.6 log was achieved which was in excessive of the original 4 log target reduction. Systematic material characterisation of surface microscopy, additive dispersion, and surface roughness was carried out and will be available for other researchers in the field. Negative polypropylene additive interactions were found during the course of this work, suggesting further study of the effect of individual additives in commercial formulations should be further investigated. Future work: There needs to be a range of activity to develop the multiple questions that have developed as a result of this work. First there needs to be PhD level work to further uncover the material interactions that hinder or help the resultant antimicrobial effects in commercial plastic materials. Studentship applications have been submitted. Secondly there needs to be commercially focused development on the formulations that work and achieve a range of kills. Specifically, longer-term efficiency is not known at this point and would need to be part of a larger study looking at service lifetimes and cleaning. Further funding is being sought to increase the industrial impact of this work. A paper and associated data and supplementary data is in preparation to aid further workers in the academic and commercial field.
Start Year 2021
 
Description NBIC POC 04POC21-276 Antibiofilm Touch Point Plastics. (Vannessa Goodship) 
Organisation University of Warwick
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall concept of this project is to develop an advanced antibiofilm rigid environmentally friendly plastic technology incorporating 5D's patented organo-metallic mixed metal complex (MMC). The project will consist of four main objectives: Develop the means to distribute the micro-powdered MMC into typical thermoplastic polymers (starting with polypropylene). The aim is to investigate and identify the optimum mixing methods for polymer/additive. Produce test plaques generated by typical mass production techniques (i.e. injection moulding, compression moulding). The aim is to generate test samples that are representative of the manufacturing processes of commercial mass production techniques. Characterise the dispersion and disposition of the antibiofilm additive in the polymer. The aim is to understand the stability, distribution and polymer/ additive interfaces and any links back to processing routes. Characterise the antimicrobial and antibiofilm, particularly dry biofilm efficacy of the test parts against a number of commercially available antimicrobial additives. The aim is to benchmark effectiveness against commercial products and modify process/processing accordingly. Successful completion of the primary objectives will result in initial prototype antibiofilm plastics that exhibit at least a 4log reduction in planktonic and biofilm bacterial counts in hydrated models. Reductions in a dry biofilm model would further cement the success. This will showcase the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost, environmentally friendly, 'game changing' antibiofilm environmentally friendly plastic technology. The filled plastics would be processable by typical mass production techniques enabling a huge range of end products to be produced. A potential plastic distributor Resinex, has been identified with interest in commercial applications of the technology. Success will be measured by both technology achievements, and with NBIC support, accelerated commercialisation towards our end user vision.
Collaborator Contribution University of Warwick: Investigations of material science and scale up processing of anti biofilm and additive. Potential application areas (non-medical). 5D Health Protection Group Ltd: Biological testing and guidance. Potential application areas (medical).
Impact Feedback from academic: This proposal explored the development of plastics on which microorganisms will not grow, either in planktonic or biofilm state. These antimicrobial plastics were fabricated by mixing a known antimicrobial additive into a commercial plastic material (polypropylene). The resultant plastics, processable by typical mass production techniques, would enable a huge range of end products across plastics surfaces and touch points in a variety of applications. By utilising a range of pre-mixing, compounding and manufacturing techniques a variety of material formulations were generated and characterised by the team at WMG, University of Warwick. These materials were then tested for antibacterial activity. The biological testing and assessments were undertaken by our collaborators 5D Health Protection Ltd (5D). This produced some interesting results, as we were able to separate a range of processing effects such as mixing types, heat, and shear as well as produce samples by common techniques used commercially. It was also noted that there was a lack of comparable background data widely available linking to plastic formulation due to limited data on testing materials and methods that have been reported in open literature. A wide range of efficacy was found dependant on the material formulation. It was also found that some additional additives impacted negatively on the performance of the antimicrobial additive, reducing its efficacy, while other formulations achieved total kill of the bacteria tested. There were therefore complex material interactions of the material mixtures taking place. Pre-mixing of the additive in certain conditions enabled very fine dispersion to be achieved throughput the sample, while other mixing techniques produced localised or a stratified graduation of dispersion. Once formulated all samples could be easily manufactured by common methods such as extrusion, compression moulding and injection moulding. Total kill of bacteria was achieved at levels of 1% additive or above in polypropylene formulations, indicating that it is not worthwhile to increase the additive content above this level. Further academic questions were also uncovered about the mechanisms of material interactions, and there needs to be more consistent benchmarking across the field for this to take place. Dissemination activity is underway, and a journal paper is being prepared to support further exploitation opportunity in funding application sectors such as electrification as well as healthcare. 1% and 1.5% additive-containing samples gave a greater than 5.6 log reduction in the bacterial count. Exceeding the project targets. Further funding is being sought to extend and exploit both commercial and fundamental questions resulting from the NBIC support. The partnership of academic and industrial interdisciplinary skills worked well to achieve our project aims. Samples were formulated using standard commercially available techniques and then characterised to understand properties such as surface finish and dispersion distribution. These samples were passed to 5D Health Protection Limited for biological assessment. A 1% addition of antimicrobial additive produced total kill in a commercial polypropylene material. A reduction of 5.6 log was achieved which was in excessive of the original 4 log target reduction. Systematic material characterisation of surface microscopy, additive dispersion, and surface roughness was carried out and will be available for other researchers in the field. Negative polypropylene additive interactions were found during the course of this work, suggesting further study of the effect of individual additives in commercial formulations should be further investigated. Future work: There needs to be a range of activity to develop the multiple questions that have developed as a result of this work. First there needs to be PhD level work to further uncover the material interactions that hinder or help the resultant antimicrobial effects in commercial plastic materials. Studentship applications have been submitted. Secondly there needs to be commercially focused development on the formulations that work and achieve a range of kills. Specifically, longer-term efficiency is not known at this point and would need to be part of a larger study looking at service lifetimes and cleaning. Further funding is being sought to increase the industrial impact of this work. A paper and associated data and supplementary data is in preparation to aid further workers in the academic and commercial field.
Start Year 2021
 
Description NBIC POC 04POC21-290 Development of an in vitro human skin biofilm model for testing active ingredients for hand hygiene. (Susana Direito) 
Organisation Aqualution Systems Ltd
Country United Kingdom 
Sector Private 
PI Contribution There is a current need for realistic, simple, affordable and high-throughput efficacy assays for hand disinfectant products. Existing standard assays do not provide a good model for real-world applications since they are based on suspension tests. On the other hand, in vivo clinical tests, while realistic, are prohibitively expensive. We propose to solve this problem by developing a human skin biofilm model that can be used for high-throughput testing of skin disinfection formulations. Our model will bridge the gap between existing suspension and in vivo clinical tests. Our industrial partner, Aqualution, is the global leader in the production and application of the biocide hypochlorous acid (HOCl). Among other product areas, Aqualution are interested in skin disinfection, and seek a high-throughput method for testing formulation efficacy. Our other industrial partner, Bear Valley Ventures, seeks to develop hand-disinfection alternatives for use in third world countries, where diarrhoea is a leading cause of morbidity and mortality around the world, which could be ameliorated by hand disinfection after defecation. The CEO, Walter Gibson, has proposed (https://doi.org/10.2166/washdev.2020.279) the concept of a disinfectant product that can be added to water that is used for post-defecation rinsing. Aqualution's HOCl could be highly suitable for use in Gibson's proposed product. Working in partnership with Aqualution and Bear Valley Ventures, we will develop an affordable, simple and high-throughput human skin biofilm model that can be used to test skin disinfection formulations. We will measure biofilm growth on human stratum corneum, and we will assay disinfection efficacy, testing Aqualution's product, HOCl, against commonly used disinfectants. This will provide a pathway to future skin product applications. Success will be defined by: Development of the biofilm skin model. Validation of the model with HOCl comparing it with soap and alcohol-based products. Applications for larger grants with our partners based on our results.
Collaborator Contribution There is £13000 cash contribution from Aqualution, £46447 funding provided from NBIC award, £11612 from University of Edinburgh, plus £18866 of in-kind contribution from industry partners (£10566 from Aqualution and £8300 from Bear Valley Ventures).
Impact In this proof of concept project we partnered with Bear Valley Ventures and Aqualution to develop a human skin-biofilm model that can be used for high throughput testing of different hand sanitising agents (biocides). This project required the use of human skin stratum corneum (SC) cell samples collected by a tape stripping method (D-squame) from 10 volunteers at the University of Edinburgh. We were successful in comparing skin cell samples from different volunteers and from different harvesting sites on the body. We showed that there is no difference in cell diameter (measuring approximately 30 µm) between volunteers when harvesting from the hand or the wrist, however to maximise coverage of the adhesive patch one should apply the patch twice to the same area. This increased the average coverage by skin cells from 47% to 72% for samples harvested from the volunteer's hands. We have been successful in developing two models during this project: a human skin model to test the efficacy of biocides removing transient bacteria and a human skin biofilm-based model to test the biocidal efficacy on biofilms. The first model includes inoculation of the SC cells with E. coli bacteria, a washing step of the inoculated sample in a biocide, and plate counts (CFUs) before and after this washing step, allowing the calculation of the log reduction factor of the biocide. This model is an alternative to the current EN1500, the European Standard test method that evaluates the efficacy of a hand disinfectant in removing transient bacteria, and shows promise in producing results that are comparable to that of EN1500. We assayed the disinfection efficacy of Aqualution's hypochlorous acid (HOCl) product samples (four samples, which were blinded, and of varying concentrations labelled A-D), against commonly used products, such as soap and isopropanol. This assay showed that soap has the lowest average reduction factor (0.86±0.18) whilst sample A of HOCl has the highest (2.61±0.33). The second model we developed is a biofilm growth model. This involves directly growing biofilm of Yellow Fluorescent Protein (YFP)-labelled E. coli for 72 hours on SC skin samples in a 6 well-plate, exposing half of the biofilms to a biocide and leaving the other half unexposed. The YFP fluorescence signal from each biofilm as a function of time was measured using a plate reader. We were able to show that the biocide exposed biofilms show a decrease in fluorescence signal concomitant with bacterial cell death. This second model could lead to a standardised protocol that is high throughput and can be scaled to produce a large volume of data from a single experimental run. This project achieved all the goals which were set out in the proof of concept research proposal. We have begun discussions with Bear Valley Ventures and Aqualution about possible follow-up collaborations.
Start Year 2021
 
Description NBIC POC 04POC21-290 Development of an in vitro human skin biofilm model for testing active ingredients for hand hygiene. (Susana Direito) 
Organisation Bear Valley Ventures Ltd
Country United Kingdom 
Sector Private 
PI Contribution There is a current need for realistic, simple, affordable and high-throughput efficacy assays for hand disinfectant products. Existing standard assays do not provide a good model for real-world applications since they are based on suspension tests. On the other hand, in vivo clinical tests, while realistic, are prohibitively expensive. We propose to solve this problem by developing a human skin biofilm model that can be used for high-throughput testing of skin disinfection formulations. Our model will bridge the gap between existing suspension and in vivo clinical tests. Our industrial partner, Aqualution, is the global leader in the production and application of the biocide hypochlorous acid (HOCl). Among other product areas, Aqualution are interested in skin disinfection, and seek a high-throughput method for testing formulation efficacy. Our other industrial partner, Bear Valley Ventures, seeks to develop hand-disinfection alternatives for use in third world countries, where diarrhoea is a leading cause of morbidity and mortality around the world, which could be ameliorated by hand disinfection after defecation. The CEO, Walter Gibson, has proposed (https://doi.org/10.2166/washdev.2020.279) the concept of a disinfectant product that can be added to water that is used for post-defecation rinsing. Aqualution's HOCl could be highly suitable for use in Gibson's proposed product. Working in partnership with Aqualution and Bear Valley Ventures, we will develop an affordable, simple and high-throughput human skin biofilm model that can be used to test skin disinfection formulations. We will measure biofilm growth on human stratum corneum, and we will assay disinfection efficacy, testing Aqualution's product, HOCl, against commonly used disinfectants. This will provide a pathway to future skin product applications. Success will be defined by: Development of the biofilm skin model. Validation of the model with HOCl comparing it with soap and alcohol-based products. Applications for larger grants with our partners based on our results.
Collaborator Contribution There is £13000 cash contribution from Aqualution, £46447 funding provided from NBIC award, £11612 from University of Edinburgh, plus £18866 of in-kind contribution from industry partners (£10566 from Aqualution and £8300 from Bear Valley Ventures).
Impact In this proof of concept project we partnered with Bear Valley Ventures and Aqualution to develop a human skin-biofilm model that can be used for high throughput testing of different hand sanitising agents (biocides). This project required the use of human skin stratum corneum (SC) cell samples collected by a tape stripping method (D-squame) from 10 volunteers at the University of Edinburgh. We were successful in comparing skin cell samples from different volunteers and from different harvesting sites on the body. We showed that there is no difference in cell diameter (measuring approximately 30 µm) between volunteers when harvesting from the hand or the wrist, however to maximise coverage of the adhesive patch one should apply the patch twice to the same area. This increased the average coverage by skin cells from 47% to 72% for samples harvested from the volunteer's hands. We have been successful in developing two models during this project: a human skin model to test the efficacy of biocides removing transient bacteria and a human skin biofilm-based model to test the biocidal efficacy on biofilms. The first model includes inoculation of the SC cells with E. coli bacteria, a washing step of the inoculated sample in a biocide, and plate counts (CFUs) before and after this washing step, allowing the calculation of the log reduction factor of the biocide. This model is an alternative to the current EN1500, the European Standard test method that evaluates the efficacy of a hand disinfectant in removing transient bacteria, and shows promise in producing results that are comparable to that of EN1500. We assayed the disinfection efficacy of Aqualution's hypochlorous acid (HOCl) product samples (four samples, which were blinded, and of varying concentrations labelled A-D), against commonly used products, such as soap and isopropanol. This assay showed that soap has the lowest average reduction factor (0.86±0.18) whilst sample A of HOCl has the highest (2.61±0.33). The second model we developed is a biofilm growth model. This involves directly growing biofilm of Yellow Fluorescent Protein (YFP)-labelled E. coli for 72 hours on SC skin samples in a 6 well-plate, exposing half of the biofilms to a biocide and leaving the other half unexposed. The YFP fluorescence signal from each biofilm as a function of time was measured using a plate reader. We were able to show that the biocide exposed biofilms show a decrease in fluorescence signal concomitant with bacterial cell death. This second model could lead to a standardised protocol that is high throughput and can be scaled to produce a large volume of data from a single experimental run. This project achieved all the goals which were set out in the proof of concept research proposal. We have begun discussions with Bear Valley Ventures and Aqualution about possible follow-up collaborations.
Start Year 2021
 
Description NBIC POC 04POC21-290 Development of an in vitro human skin biofilm model for testing active ingredients for hand hygiene. (Susana Direito) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution There is a current need for realistic, simple, affordable and high-throughput efficacy assays for hand disinfectant products. Existing standard assays do not provide a good model for real-world applications since they are based on suspension tests. On the other hand, in vivo clinical tests, while realistic, are prohibitively expensive. We propose to solve this problem by developing a human skin biofilm model that can be used for high-throughput testing of skin disinfection formulations. Our model will bridge the gap between existing suspension and in vivo clinical tests. Our industrial partner, Aqualution, is the global leader in the production and application of the biocide hypochlorous acid (HOCl). Among other product areas, Aqualution are interested in skin disinfection, and seek a high-throughput method for testing formulation efficacy. Our other industrial partner, Bear Valley Ventures, seeks to develop hand-disinfection alternatives for use in third world countries, where diarrhoea is a leading cause of morbidity and mortality around the world, which could be ameliorated by hand disinfection after defecation. The CEO, Walter Gibson, has proposed (https://doi.org/10.2166/washdev.2020.279) the concept of a disinfectant product that can be added to water that is used for post-defecation rinsing. Aqualution's HOCl could be highly suitable for use in Gibson's proposed product. Working in partnership with Aqualution and Bear Valley Ventures, we will develop an affordable, simple and high-throughput human skin biofilm model that can be used to test skin disinfection formulations. We will measure biofilm growth on human stratum corneum, and we will assay disinfection efficacy, testing Aqualution's product, HOCl, against commonly used disinfectants. This will provide a pathway to future skin product applications. Success will be defined by: Development of the biofilm skin model. Validation of the model with HOCl comparing it with soap and alcohol-based products. Applications for larger grants with our partners based on our results.
Collaborator Contribution There is £13000 cash contribution from Aqualution, £46447 funding provided from NBIC award, £11612 from University of Edinburgh, plus £18866 of in-kind contribution from industry partners (£10566 from Aqualution and £8300 from Bear Valley Ventures).
Impact In this proof of concept project we partnered with Bear Valley Ventures and Aqualution to develop a human skin-biofilm model that can be used for high throughput testing of different hand sanitising agents (biocides). This project required the use of human skin stratum corneum (SC) cell samples collected by a tape stripping method (D-squame) from 10 volunteers at the University of Edinburgh. We were successful in comparing skin cell samples from different volunteers and from different harvesting sites on the body. We showed that there is no difference in cell diameter (measuring approximately 30 µm) between volunteers when harvesting from the hand or the wrist, however to maximise coverage of the adhesive patch one should apply the patch twice to the same area. This increased the average coverage by skin cells from 47% to 72% for samples harvested from the volunteer's hands. We have been successful in developing two models during this project: a human skin model to test the efficacy of biocides removing transient bacteria and a human skin biofilm-based model to test the biocidal efficacy on biofilms. The first model includes inoculation of the SC cells with E. coli bacteria, a washing step of the inoculated sample in a biocide, and plate counts (CFUs) before and after this washing step, allowing the calculation of the log reduction factor of the biocide. This model is an alternative to the current EN1500, the European Standard test method that evaluates the efficacy of a hand disinfectant in removing transient bacteria, and shows promise in producing results that are comparable to that of EN1500. We assayed the disinfection efficacy of Aqualution's hypochlorous acid (HOCl) product samples (four samples, which were blinded, and of varying concentrations labelled A-D), against commonly used products, such as soap and isopropanol. This assay showed that soap has the lowest average reduction factor (0.86±0.18) whilst sample A of HOCl has the highest (2.61±0.33). The second model we developed is a biofilm growth model. This involves directly growing biofilm of Yellow Fluorescent Protein (YFP)-labelled E. coli for 72 hours on SC skin samples in a 6 well-plate, exposing half of the biofilms to a biocide and leaving the other half unexposed. The YFP fluorescence signal from each biofilm as a function of time was measured using a plate reader. We were able to show that the biocide exposed biofilms show a decrease in fluorescence signal concomitant with bacterial cell death. This second model could lead to a standardised protocol that is high throughput and can be scaled to produce a large volume of data from a single experimental run. This project achieved all the goals which were set out in the proof of concept research proposal. We have begun discussions with Bear Valley Ventures and Aqualution about possible follow-up collaborations.
Start Year 2021
 
Description NBIC POC 04POC21-290 Development of an in vitro human skin biofilm model for testing active ingredients for hand hygiene. (Susana Direito) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution There is a current need for realistic, simple, affordable and high-throughput efficacy assays for hand disinfectant products. Existing standard assays do not provide a good model for real-world applications since they are based on suspension tests. On the other hand, in vivo clinical tests, while realistic, are prohibitively expensive. We propose to solve this problem by developing a human skin biofilm model that can be used for high-throughput testing of skin disinfection formulations. Our model will bridge the gap between existing suspension and in vivo clinical tests. Our industrial partner, Aqualution, is the global leader in the production and application of the biocide hypochlorous acid (HOCl). Among other product areas, Aqualution are interested in skin disinfection, and seek a high-throughput method for testing formulation efficacy. Our other industrial partner, Bear Valley Ventures, seeks to develop hand-disinfection alternatives for use in third world countries, where diarrhoea is a leading cause of morbidity and mortality around the world, which could be ameliorated by hand disinfection after defecation. The CEO, Walter Gibson, has proposed (https://doi.org/10.2166/washdev.2020.279) the concept of a disinfectant product that can be added to water that is used for post-defecation rinsing. Aqualution's HOCl could be highly suitable for use in Gibson's proposed product. Working in partnership with Aqualution and Bear Valley Ventures, we will develop an affordable, simple and high-throughput human skin biofilm model that can be used to test skin disinfection formulations. We will measure biofilm growth on human stratum corneum, and we will assay disinfection efficacy, testing Aqualution's product, HOCl, against commonly used disinfectants. This will provide a pathway to future skin product applications. Success will be defined by: Development of the biofilm skin model. Validation of the model with HOCl comparing it with soap and alcohol-based products. Applications for larger grants with our partners based on our results.
Collaborator Contribution There is £13000 cash contribution from Aqualution, £46447 funding provided from NBIC award, £11612 from University of Edinburgh, plus £18866 of in-kind contribution from industry partners (£10566 from Aqualution and £8300 from Bear Valley Ventures).
Impact In this proof of concept project we partnered with Bear Valley Ventures and Aqualution to develop a human skin-biofilm model that can be used for high throughput testing of different hand sanitising agents (biocides). This project required the use of human skin stratum corneum (SC) cell samples collected by a tape stripping method (D-squame) from 10 volunteers at the University of Edinburgh. We were successful in comparing skin cell samples from different volunteers and from different harvesting sites on the body. We showed that there is no difference in cell diameter (measuring approximately 30 µm) between volunteers when harvesting from the hand or the wrist, however to maximise coverage of the adhesive patch one should apply the patch twice to the same area. This increased the average coverage by skin cells from 47% to 72% for samples harvested from the volunteer's hands. We have been successful in developing two models during this project: a human skin model to test the efficacy of biocides removing transient bacteria and a human skin biofilm-based model to test the biocidal efficacy on biofilms. The first model includes inoculation of the SC cells with E. coli bacteria, a washing step of the inoculated sample in a biocide, and plate counts (CFUs) before and after this washing step, allowing the calculation of the log reduction factor of the biocide. This model is an alternative to the current EN1500, the European Standard test method that evaluates the efficacy of a hand disinfectant in removing transient bacteria, and shows promise in producing results that are comparable to that of EN1500. We assayed the disinfection efficacy of Aqualution's hypochlorous acid (HOCl) product samples (four samples, which were blinded, and of varying concentrations labelled A-D), against commonly used products, such as soap and isopropanol. This assay showed that soap has the lowest average reduction factor (0.86±0.18) whilst sample A of HOCl has the highest (2.61±0.33). The second model we developed is a biofilm growth model. This involves directly growing biofilm of Yellow Fluorescent Protein (YFP)-labelled E. coli for 72 hours on SC skin samples in a 6 well-plate, exposing half of the biofilms to a biocide and leaving the other half unexposed. The YFP fluorescence signal from each biofilm as a function of time was measured using a plate reader. We were able to show that the biocide exposed biofilms show a decrease in fluorescence signal concomitant with bacterial cell death. This second model could lead to a standardised protocol that is high throughput and can be scaled to produce a large volume of data from a single experimental run. This project achieved all the goals which were set out in the proof of concept research proposal. We have begun discussions with Bear Valley Ventures and Aqualution about possible follow-up collaborations.
Start Year 2021
 
Description NBIC POC 04POC21-293 To incorporate a quorum sensing blocker (lactams) into topical treatments to control mixed biofilms on keratinaceous infections. (Gordon Ramage) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall concept of this project is to develop a topical skin application prototype (ointment / liquid / cream) combined with a 'game changing' quorum sensing (QS) blocking agent. The project will have three interlinked objectives: Develop a low-cost and safe antibiofilm/QS blocking 'proof of concept' prototype for topical skin, nail and wound application. To optimise the performance of the antibiofilm technology based on lactam chemistry of the prototype i.e. ensure bioavailability of the active agent is both sustained and maintained. Evaluate the prototype under both ASTM based biofilm models and in vitro keratin-based hydrogel models to produce a 'proof of concept' formulation. Successful completion of the primary objectives will result in an initial prototype formulation that showcases the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost 'game changing' antibiofilm and QS blocking topical skin treatment that can be purchased "over the counter" (OTC). The prototype will aim to administer a sufficient level of lactam (QS blocker) over the period required to control keratin associated infections, with a primary focus on mixed fungal communities) and potentially also down-regulate other variables known to delay infection-site healing e.g. inflammation. A key feature of this novel anti-biofilm system is the effectiveness against fungi and bacteria, providing a synergistic effect to manage the complex microflora within an infected site. The application of the technology could also extend to the treatment of animals (veterinary; animal husbandry; household pets). The key aim of the project is to develop and test a topical skin/nail treatment that incorporates this novel and unique QS blocking agent. Success will be measured by the ability of these formulated lactams to successfully manage mixed fungal biofilms in a keratin-based models.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: We have effectively demonstrated the antifungal activity of both lactams 488 and 491 against a wide range of C. albicans, C. auris, C. glabrata, C. parapsilosis, C. tropicalis and filamentous fungi with pMIC ranging from 3.75 µg/mL to 15 µg/mL. It was evident from the MIC values that lactam 488 was more effective than 491 where the latter required double the concentration of the lactam 488 to inhibit the visual growth of fungi. We have also developed a keratin incorporated hydrogel substrate to simulate the skin and used it effectively to test the effectiveness of lactam 488 against mono- and multispecies biofilms. We also demonstrated that 488 is equally effective on keratin hydrogel as on plastic substrates and its antimicrobial action was not impacted by substrate change. Both lactams showed fungicidal effect on planktonic and biofilm forms. However, as anticipated, biofilms were more resistance to treatment compared with its planktonic counterpart and a concentration of 240 µg/mL of the lactam 488 was required to induce >95% inhibition of viability. Lactams also demonstrated antibacterial activity against Staphylococcus aureus in both mono- and multispecies biofilms but not against Pseudomonas aeruginosa. As a potential replacement or additive active compound to the current available skin antifungals, lactam 488 showed synergy with Itraconazole. It also showed a comparable antifungal activity to that of the "Lamisil", over the counter antifungal spray for the management of tinea pedis and tinea cruris. Lactams have a fungicidal effect against a wide range of fungi and shown to be effective on skin simulated substrate. Lactams treated C. albicans biofilms showed no regrowth potential after treatment and lactam 488 were as effective as the commercial antifungal "Lamisil" against early and mature C. albicans biofilms. With further assessment of their effectiveness against multispecies biofilm models, lactams can be potentially used as a new or as adjunctive active agent for the management of skin and nail infections. INTELLECTUAL PROPERTY Unilever aiming to file IP in the use of lactams for keratin infections and for the potentiation of commonly used anti-fungal actives. WHAT DID HAPPEN NEXT? OR IS GOING TO HAPPEN NEXT? The results of the current study will be compiled into a manuscript for publication. We hope to submit the paper to a high impact biofilm-related journal by the end of this year. Continued discussion between both teams to define potential further collaboration is the assessment of lactams for healthcare application.
Start Year 2021
 
Description NBIC POC 04POC21-293 To incorporate a quorum sensing blocker (lactams) into topical treatments to control mixed biofilms on keratinaceous infections. (Gordon Ramage) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution The overall concept of this project is to develop a topical skin application prototype (ointment / liquid / cream) combined with a 'game changing' quorum sensing (QS) blocking agent. The project will have three interlinked objectives: Develop a low-cost and safe antibiofilm/QS blocking 'proof of concept' prototype for topical skin, nail and wound application. To optimise the performance of the antibiofilm technology based on lactam chemistry of the prototype i.e. ensure bioavailability of the active agent is both sustained and maintained. Evaluate the prototype under both ASTM based biofilm models and in vitro keratin-based hydrogel models to produce a 'proof of concept' formulation. Successful completion of the primary objectives will result in an initial prototype formulation that showcases the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost 'game changing' antibiofilm and QS blocking topical skin treatment that can be purchased "over the counter" (OTC). The prototype will aim to administer a sufficient level of lactam (QS blocker) over the period required to control keratin associated infections, with a primary focus on mixed fungal communities) and potentially also down-regulate other variables known to delay infection-site healing e.g. inflammation. A key feature of this novel anti-biofilm system is the effectiveness against fungi and bacteria, providing a synergistic effect to manage the complex microflora within an infected site. The application of the technology could also extend to the treatment of animals (veterinary; animal husbandry; household pets). The key aim of the project is to develop and test a topical skin/nail treatment that incorporates this novel and unique QS blocking agent. Success will be measured by the ability of these formulated lactams to successfully manage mixed fungal biofilms in a keratin-based models.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: We have effectively demonstrated the antifungal activity of both lactams 488 and 491 against a wide range of C. albicans, C. auris, C. glabrata, C. parapsilosis, C. tropicalis and filamentous fungi with pMIC ranging from 3.75 µg/mL to 15 µg/mL. It was evident from the MIC values that lactam 488 was more effective than 491 where the latter required double the concentration of the lactam 488 to inhibit the visual growth of fungi. We have also developed a keratin incorporated hydrogel substrate to simulate the skin and used it effectively to test the effectiveness of lactam 488 against mono- and multispecies biofilms. We also demonstrated that 488 is equally effective on keratin hydrogel as on plastic substrates and its antimicrobial action was not impacted by substrate change. Both lactams showed fungicidal effect on planktonic and biofilm forms. However, as anticipated, biofilms were more resistance to treatment compared with its planktonic counterpart and a concentration of 240 µg/mL of the lactam 488 was required to induce >95% inhibition of viability. Lactams also demonstrated antibacterial activity against Staphylococcus aureus in both mono- and multispecies biofilms but not against Pseudomonas aeruginosa. As a potential replacement or additive active compound to the current available skin antifungals, lactam 488 showed synergy with Itraconazole. It also showed a comparable antifungal activity to that of the "Lamisil", over the counter antifungal spray for the management of tinea pedis and tinea cruris. Lactams have a fungicidal effect against a wide range of fungi and shown to be effective on skin simulated substrate. Lactams treated C. albicans biofilms showed no regrowth potential after treatment and lactam 488 were as effective as the commercial antifungal "Lamisil" against early and mature C. albicans biofilms. With further assessment of their effectiveness against multispecies biofilm models, lactams can be potentially used as a new or as adjunctive active agent for the management of skin and nail infections. INTELLECTUAL PROPERTY Unilever aiming to file IP in the use of lactams for keratin infections and for the potentiation of commonly used anti-fungal actives. WHAT DID HAPPEN NEXT? OR IS GOING TO HAPPEN NEXT? The results of the current study will be compiled into a manuscript for publication. We hope to submit the paper to a high impact biofilm-related journal by the end of this year. Continued discussion between both teams to define potential further collaboration is the assessment of lactams for healthcare application.
Start Year 2021
 
Description NBIC POC 04POC21-293 To incorporate a quorum sensing blocker (lactams) into topical treatments to control mixed biofilms on keratinaceous infections. (Gordon Ramage) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall concept of this project is to develop a topical skin application prototype (ointment / liquid / cream) combined with a 'game changing' quorum sensing (QS) blocking agent. The project will have three interlinked objectives: Develop a low-cost and safe antibiofilm/QS blocking 'proof of concept' prototype for topical skin, nail and wound application. To optimise the performance of the antibiofilm technology based on lactam chemistry of the prototype i.e. ensure bioavailability of the active agent is both sustained and maintained. Evaluate the prototype under both ASTM based biofilm models and in vitro keratin-based hydrogel models to produce a 'proof of concept' formulation. Successful completion of the primary objectives will result in an initial prototype formulation that showcases the readiness and suitability of the technology for potential future commercial development. It is envisaged that with follow on funding the technology will be commercialised, as a low-cost 'game changing' antibiofilm and QS blocking topical skin treatment that can be purchased "over the counter" (OTC). The prototype will aim to administer a sufficient level of lactam (QS blocker) over the period required to control keratin associated infections, with a primary focus on mixed fungal communities) and potentially also down-regulate other variables known to delay infection-site healing e.g. inflammation. A key feature of this novel anti-biofilm system is the effectiveness against fungi and bacteria, providing a synergistic effect to manage the complex microflora within an infected site. The application of the technology could also extend to the treatment of animals (veterinary; animal husbandry; household pets). The key aim of the project is to develop and test a topical skin/nail treatment that incorporates this novel and unique QS blocking agent. Success will be measured by the ability of these formulated lactams to successfully manage mixed fungal biofilms in a keratin-based models.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: We have effectively demonstrated the antifungal activity of both lactams 488 and 491 against a wide range of C. albicans, C. auris, C. glabrata, C. parapsilosis, C. tropicalis and filamentous fungi with pMIC ranging from 3.75 µg/mL to 15 µg/mL. It was evident from the MIC values that lactam 488 was more effective than 491 where the latter required double the concentration of the lactam 488 to inhibit the visual growth of fungi. We have also developed a keratin incorporated hydrogel substrate to simulate the skin and used it effectively to test the effectiveness of lactam 488 against mono- and multispecies biofilms. We also demonstrated that 488 is equally effective on keratin hydrogel as on plastic substrates and its antimicrobial action was not impacted by substrate change. Both lactams showed fungicidal effect on planktonic and biofilm forms. However, as anticipated, biofilms were more resistance to treatment compared with its planktonic counterpart and a concentration of 240 µg/mL of the lactam 488 was required to induce >95% inhibition of viability. Lactams also demonstrated antibacterial activity against Staphylococcus aureus in both mono- and multispecies biofilms but not against Pseudomonas aeruginosa. As a potential replacement or additive active compound to the current available skin antifungals, lactam 488 showed synergy with Itraconazole. It also showed a comparable antifungal activity to that of the "Lamisil", over the counter antifungal spray for the management of tinea pedis and tinea cruris. Lactams have a fungicidal effect against a wide range of fungi and shown to be effective on skin simulated substrate. Lactams treated C. albicans biofilms showed no regrowth potential after treatment and lactam 488 were as effective as the commercial antifungal "Lamisil" against early and mature C. albicans biofilms. With further assessment of their effectiveness against multispecies biofilm models, lactams can be potentially used as a new or as adjunctive active agent for the management of skin and nail infections. INTELLECTUAL PROPERTY Unilever aiming to file IP in the use of lactams for keratin infections and for the potentiation of commonly used anti-fungal actives. WHAT DID HAPPEN NEXT? OR IS GOING TO HAPPEN NEXT? The results of the current study will be compiled into a manuscript for publication. We hope to submit the paper to a high impact biofilm-related journal by the end of this year. Continued discussion between both teams to define potential further collaboration is the assessment of lactams for healthcare application.
Start Year 2021
 
Description NBIC POC 04POC21-297 Bioinspired protein technology for biofilm prevention on indwelling medical devices. (Rasmita Raval) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The overall aim of this project is to adapt a breakthrough, next generation antimicrobial protein technology, for use on indwelling medical devices (tubing), to prevent microbial contamination and biofilm formation. Virustatic has been working with this protein for over a decade and has developed and commercialised an antiviral face covering, using the trademarked compound 'Viruferrin'. This project will translate this successful technology to the medical devices sector via close collaboration between Virustatic entrepreneurs and the University of Liverpool's (UoL) world-leading expertise in surface functionalisation and innovative antimicrobial solutions. There is a strong need for effective, alternative approaches to prevent pathogenic biofilm formation on surfaces. Lactoferrin is a naturally occurring protein, shown to exert anti-biofilm effects [Curvelo et al. An Acad Bras Cienc. 2019; Fais et al. Front Microbiol. 2017], through a range of unique properties, such as high cationic charge, sequestration of free iron ions, affecting microbial adhesion, disrupting membranes and interference with biofilm signalling. This multiplicity of actions means that its tendency to create antimicrobial resistance (AMR) is low, but its effectiveness against chronic and complex biofilms is high. The innovation challenge is fabricating innovative materials that can incorporate and deploy this multifunctional entity. This project will have three specific, interlinked objectives: Design of strategies for lactoferrin-functionalised surfaces and materials; Evaluation of the functionalisation strategies by surface analysis, bioassays and stability studies; Demonstration of the technology effectiveness on, mimicking real-life scenarios, model systems. The third objective will provide a clear demonstration of the successful POC delivery. This project will concentrate on endotracheal tubes (ETT) and urinary catheters. Successful delivery will create a platform for applications across wider medical devices market, including prosthesis and implants. Our proposed technology has low regulatory hurdles as lactoferrin is classified safe for human interaction and is part of innate immune system.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: Biofilm formation on indwelling medical devices, such as ventilators or catheters, contributes significantly to the chronicity of infections, posing a substantial healthcare and economic burden. This project investigated novel antimicrobial materials created via the incorporation of natural protein-based technology into polymer systems that could be used for indwelling medical devices. The project successfully demonstrated that the protein-functionalised materials demonstrated antimicrobial activity, providing potential effectiveness against biofilm formation. Further work: IP status is currently being evaluated by Virustatic and Radical Fibres. The technology, future R&D work and timelines for technology development are being evaluated by Virustatic and Radical Fibres. On the basis of this, the consortium will evaluate best sources for future funding to progress this technology.
Start Year 2021
 
Description NBIC POC 04POC21-297 Bioinspired protein technology for biofilm prevention on indwelling medical devices. (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall aim of this project is to adapt a breakthrough, next generation antimicrobial protein technology, for use on indwelling medical devices (tubing), to prevent microbial contamination and biofilm formation. Virustatic has been working with this protein for over a decade and has developed and commercialised an antiviral face covering, using the trademarked compound 'Viruferrin'. This project will translate this successful technology to the medical devices sector via close collaboration between Virustatic entrepreneurs and the University of Liverpool's (UoL) world-leading expertise in surface functionalisation and innovative antimicrobial solutions. There is a strong need for effective, alternative approaches to prevent pathogenic biofilm formation on surfaces. Lactoferrin is a naturally occurring protein, shown to exert anti-biofilm effects [Curvelo et al. An Acad Bras Cienc. 2019; Fais et al. Front Microbiol. 2017], through a range of unique properties, such as high cationic charge, sequestration of free iron ions, affecting microbial adhesion, disrupting membranes and interference with biofilm signalling. This multiplicity of actions means that its tendency to create antimicrobial resistance (AMR) is low, but its effectiveness against chronic and complex biofilms is high. The innovation challenge is fabricating innovative materials that can incorporate and deploy this multifunctional entity. This project will have three specific, interlinked objectives: Design of strategies for lactoferrin-functionalised surfaces and materials; Evaluation of the functionalisation strategies by surface analysis, bioassays and stability studies; Demonstration of the technology effectiveness on, mimicking real-life scenarios, model systems. The third objective will provide a clear demonstration of the successful POC delivery. This project will concentrate on endotracheal tubes (ETT) and urinary catheters. Successful delivery will create a platform for applications across wider medical devices market, including prosthesis and implants. Our proposed technology has low regulatory hurdles as lactoferrin is classified safe for human interaction and is part of innate immune system.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: Biofilm formation on indwelling medical devices, such as ventilators or catheters, contributes significantly to the chronicity of infections, posing a substantial healthcare and economic burden. This project investigated novel antimicrobial materials created via the incorporation of natural protein-based technology into polymer systems that could be used for indwelling medical devices. The project successfully demonstrated that the protein-functionalised materials demonstrated antimicrobial activity, providing potential effectiveness against biofilm formation. Further work: IP status is currently being evaluated by Virustatic and Radical Fibres. The technology, future R&D work and timelines for technology development are being evaluated by Virustatic and Radical Fibres. On the basis of this, the consortium will evaluate best sources for future funding to progress this technology.
Start Year 2021
 
Description NBIC POC 04POC21-297 Bioinspired protein technology for biofilm prevention on indwelling medical devices. (Rasmita Raval) 
Organisation Virustatic Shield Ltd
Country United Kingdom 
Sector Private 
PI Contribution The overall aim of this project is to adapt a breakthrough, next generation antimicrobial protein technology, for use on indwelling medical devices (tubing), to prevent microbial contamination and biofilm formation. Virustatic has been working with this protein for over a decade and has developed and commercialised an antiviral face covering, using the trademarked compound 'Viruferrin'. This project will translate this successful technology to the medical devices sector via close collaboration between Virustatic entrepreneurs and the University of Liverpool's (UoL) world-leading expertise in surface functionalisation and innovative antimicrobial solutions. There is a strong need for effective, alternative approaches to prevent pathogenic biofilm formation on surfaces. Lactoferrin is a naturally occurring protein, shown to exert anti-biofilm effects [Curvelo et al. An Acad Bras Cienc. 2019; Fais et al. Front Microbiol. 2017], through a range of unique properties, such as high cationic charge, sequestration of free iron ions, affecting microbial adhesion, disrupting membranes and interference with biofilm signalling. This multiplicity of actions means that its tendency to create antimicrobial resistance (AMR) is low, but its effectiveness against chronic and complex biofilms is high. The innovation challenge is fabricating innovative materials that can incorporate and deploy this multifunctional entity. This project will have three specific, interlinked objectives: Design of strategies for lactoferrin-functionalised surfaces and materials; Evaluation of the functionalisation strategies by surface analysis, bioassays and stability studies; Demonstration of the technology effectiveness on, mimicking real-life scenarios, model systems. The third objective will provide a clear demonstration of the successful POC delivery. This project will concentrate on endotracheal tubes (ETT) and urinary catheters. Successful delivery will create a platform for applications across wider medical devices market, including prosthesis and implants. Our proposed technology has low regulatory hurdles as lactoferrin is classified safe for human interaction and is part of innate immune system.
Collaborator Contribution Full collaborative partners in this POC project.
Impact Feedback from academic: Biofilm formation on indwelling medical devices, such as ventilators or catheters, contributes significantly to the chronicity of infections, posing a substantial healthcare and economic burden. This project investigated novel antimicrobial materials created via the incorporation of natural protein-based technology into polymer systems that could be used for indwelling medical devices. The project successfully demonstrated that the protein-functionalised materials demonstrated antimicrobial activity, providing potential effectiveness against biofilm formation. Further work: IP status is currently being evaluated by Virustatic and Radical Fibres. The technology, future R&D work and timelines for technology development are being evaluated by Virustatic and Radical Fibres. On the basis of this, the consortium will evaluate best sources for future funding to progress this technology.
Start Year 2021
 
Description NBIC POC 04POC21-304 Accelerating Innovation By Designing Water Treatment Biofilm Media in silico. (Thomas Curtis) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Our immediate objective is to design and optimise an annamox biofilm for a moving bed bio-reactor (MBBR) using computer models. The model will extend our existing framework to include annamox bacteria and pH dependent solute (for example calcium) precipitation. And, in so doing demonstrate: 1) the validity of simulation as biofilm design tool for water treatment, and 2) our ability to determine and predict emergent properties of engineering importance such as biofilm density. Density is a key parameter in an MBBR. Such reactors comprise an aeration tank with mobile media (to provide a surface where biofilms can grow). Obviously, the media should have neutral buoyancy. Scaling in the biofilm is problematic as the media becomes heavier and carriers in MBBR reactor may sink deteriorating the performance of the process. Scaling is difficult to predict and measures to control scaling must be reconciled with other treatment objectives. We will validate our model using data provided by our collaborators. They will make their extensive and expensive library of data available to us for validation. The data includes the effect of media design (thicknesses ranging between 200 µm and 1000µm) on biofilm characteristics (including 16S RNA, pH, solids, biomass, calcium concentrations) and bulk parameters (such as COD, BOD, nutrients, and alkalinity). Our longer-term objective is to show that multiscale simulations can be used to develop biofilm systems to clean water in a variety of settings. And in so doing accelerate the rate of innovation in the field and bring robust and sustainable biofilm-based technologies to application, and to market, more quickly.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-304 Accelerating Innovation By Designing Water Treatment Biofilm Media in silico. (Thomas Curtis) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution Our immediate objective is to design and optimise an annamox biofilm for a moving bed bio-reactor (MBBR) using computer models. The model will extend our existing framework to include annamox bacteria and pH dependent solute (for example calcium) precipitation. And, in so doing demonstrate: 1) the validity of simulation as biofilm design tool for water treatment, and 2) our ability to determine and predict emergent properties of engineering importance such as biofilm density. Density is a key parameter in an MBBR. Such reactors comprise an aeration tank with mobile media (to provide a surface where biofilms can grow). Obviously, the media should have neutral buoyancy. Scaling in the biofilm is problematic as the media becomes heavier and carriers in MBBR reactor may sink deteriorating the performance of the process. Scaling is difficult to predict and measures to control scaling must be reconciled with other treatment objectives. We will validate our model using data provided by our collaborators. They will make their extensive and expensive library of data available to us for validation. The data includes the effect of media design (thicknesses ranging between 200 µm and 1000µm) on biofilm characteristics (including 16S RNA, pH, solids, biomass, calcium concentrations) and bulk parameters (such as COD, BOD, nutrients, and alkalinity). Our longer-term objective is to show that multiscale simulations can be used to develop biofilm systems to clean water in a variety of settings. And in so doing accelerate the rate of innovation in the field and bring robust and sustainable biofilm-based technologies to application, and to market, more quickly.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-304 Accelerating Innovation By Designing Water Treatment Biofilm Media in silico. (Thomas Curtis) 
Organisation Northumbrian Water
Country United Kingdom 
Sector Private 
PI Contribution Our immediate objective is to design and optimise an annamox biofilm for a moving bed bio-reactor (MBBR) using computer models. The model will extend our existing framework to include annamox bacteria and pH dependent solute (for example calcium) precipitation. And, in so doing demonstrate: 1) the validity of simulation as biofilm design tool for water treatment, and 2) our ability to determine and predict emergent properties of engineering importance such as biofilm density. Density is a key parameter in an MBBR. Such reactors comprise an aeration tank with mobile media (to provide a surface where biofilms can grow). Obviously, the media should have neutral buoyancy. Scaling in the biofilm is problematic as the media becomes heavier and carriers in MBBR reactor may sink deteriorating the performance of the process. Scaling is difficult to predict and measures to control scaling must be reconciled with other treatment objectives. We will validate our model using data provided by our collaborators. They will make their extensive and expensive library of data available to us for validation. The data includes the effect of media design (thicknesses ranging between 200 µm and 1000µm) on biofilm characteristics (including 16S RNA, pH, solids, biomass, calcium concentrations) and bulk parameters (such as COD, BOD, nutrients, and alkalinity). Our longer-term objective is to show that multiscale simulations can be used to develop biofilm systems to clean water in a variety of settings. And in so doing accelerate the rate of innovation in the field and bring robust and sustainable biofilm-based technologies to application, and to market, more quickly.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-304 Accelerating Innovation By Designing Water Treatment Biofilm Media in silico. (Thomas Curtis) 
Organisation Science and Technologies Facilities Council (STFC)
Department Hartree Centre
Country United Kingdom 
Sector Academic/University 
PI Contribution Our immediate objective is to design and optimise an annamox biofilm for a moving bed bio-reactor (MBBR) using computer models. The model will extend our existing framework to include annamox bacteria and pH dependent solute (for example calcium) precipitation. And, in so doing demonstrate: 1) the validity of simulation as biofilm design tool for water treatment, and 2) our ability to determine and predict emergent properties of engineering importance such as biofilm density. Density is a key parameter in an MBBR. Such reactors comprise an aeration tank with mobile media (to provide a surface where biofilms can grow). Obviously, the media should have neutral buoyancy. Scaling in the biofilm is problematic as the media becomes heavier and carriers in MBBR reactor may sink deteriorating the performance of the process. Scaling is difficult to predict and measures to control scaling must be reconciled with other treatment objectives. We will validate our model using data provided by our collaborators. They will make their extensive and expensive library of data available to us for validation. The data includes the effect of media design (thicknesses ranging between 200 µm and 1000µm) on biofilm characteristics (including 16S RNA, pH, solids, biomass, calcium concentrations) and bulk parameters (such as COD, BOD, nutrients, and alkalinity). Our longer-term objective is to show that multiscale simulations can be used to develop biofilm systems to clean water in a variety of settings. And in so doing accelerate the rate of innovation in the field and bring robust and sustainable biofilm-based technologies to application, and to market, more quickly.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-304 Accelerating Innovation By Designing Water Treatment Biofilm Media in silico. (Thomas Curtis) 
Organisation Veolia Environmental Services
Country United Kingdom 
Sector Private 
PI Contribution Our immediate objective is to design and optimise an annamox biofilm for a moving bed bio-reactor (MBBR) using computer models. The model will extend our existing framework to include annamox bacteria and pH dependent solute (for example calcium) precipitation. And, in so doing demonstrate: 1) the validity of simulation as biofilm design tool for water treatment, and 2) our ability to determine and predict emergent properties of engineering importance such as biofilm density. Density is a key parameter in an MBBR. Such reactors comprise an aeration tank with mobile media (to provide a surface where biofilms can grow). Obviously, the media should have neutral buoyancy. Scaling in the biofilm is problematic as the media becomes heavier and carriers in MBBR reactor may sink deteriorating the performance of the process. Scaling is difficult to predict and measures to control scaling must be reconciled with other treatment objectives. We will validate our model using data provided by our collaborators. They will make their extensive and expensive library of data available to us for validation. The data includes the effect of media design (thicknesses ranging between 200 µm and 1000µm) on biofilm characteristics (including 16S RNA, pH, solids, biomass, calcium concentrations) and bulk parameters (such as COD, BOD, nutrients, and alkalinity). Our longer-term objective is to show that multiscale simulations can be used to develop biofilm systems to clean water in a variety of settings. And in so doing accelerate the rate of innovation in the field and bring robust and sustainable biofilm-based technologies to application, and to market, more quickly.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-309 Development of novel biomimetic surfaces to prevent biofilm formation on catheters. (Jinju Chen) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution One of the major issues for biomedical devices is bacteria-induced infections arising from bacterial adhesion and subsequent biofilm formation on their surfaces. Currently, antimicrobial strategies for medical devices are dominated by coatings that release chemical agents such as antibiotics and silver ions to kill the bacteria. However, these chemical bactericidal strategies can contribute to the emergence of antimicrobial resistance (AMR). Thus, there is a pressing need to develop antibiofilm surfaces without using antibiotics or other antimicrobial agents. At present, the physics of bacteria-materials surface interactions remains poorly understood, which significantly hinders the innovative design for the next generation of anti-biofilm surfaces in biomedical devices. Therefore, in this project, we shall develop biomimetic surfaces to prevent long-term biofilm formation while retaining biocompatibility. The physical properties of many surfaces in nature (e.g. surface wettability, topography, friction and elasticity) conveys inherent antifouling qualities. We have an established track record in the design of biomimetic antifouling surfaces and biofilm characterisation (funded by EPSRC and The Royal Society). We shall also apply the knowledge obtained to relevant industrial settings. Our specific objectives are: Design and characterize surface properties of slippery surfaces for silicone catheter materials. Determine the effect of slippery surfaces under flow conditions on bacterial attachment and colonisation. Optimise antibiofilm performance and sustainability under catheter-like flow. The key outcome is to provide pilot data and collaborative outputs that will underpin a large EPSRC bid to develop antibiofilm surfaces for medical implants. We also anticipate a high-impact journal paper resulted from this new collaboration.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-309 Development of novel biomimetic surfaces to prevent biofilm formation on catheters. (Jinju Chen) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution One of the major issues for biomedical devices is bacteria-induced infections arising from bacterial adhesion and subsequent biofilm formation on their surfaces. Currently, antimicrobial strategies for medical devices are dominated by coatings that release chemical agents such as antibiotics and silver ions to kill the bacteria. However, these chemical bactericidal strategies can contribute to the emergence of antimicrobial resistance (AMR). Thus, there is a pressing need to develop antibiofilm surfaces without using antibiotics or other antimicrobial agents. At present, the physics of bacteria-materials surface interactions remains poorly understood, which significantly hinders the innovative design for the next generation of anti-biofilm surfaces in biomedical devices. Therefore, in this project, we shall develop biomimetic surfaces to prevent long-term biofilm formation while retaining biocompatibility. The physical properties of many surfaces in nature (e.g. surface wettability, topography, friction and elasticity) conveys inherent antifouling qualities. We have an established track record in the design of biomimetic antifouling surfaces and biofilm characterisation (funded by EPSRC and The Royal Society). We shall also apply the knowledge obtained to relevant industrial settings. Our specific objectives are: Design and characterize surface properties of slippery surfaces for silicone catheter materials. Determine the effect of slippery surfaces under flow conditions on bacterial attachment and colonisation. Optimise antibiofilm performance and sustainability under catheter-like flow. The key outcome is to provide pilot data and collaborative outputs that will underpin a large EPSRC bid to develop antibiofilm surfaces for medical implants. We also anticipate a high-impact journal paper resulted from this new collaboration.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-309 Development of novel biomimetic surfaces to prevent biofilm formation on catheters. (Jinju Chen) 
Organisation Teleflex Medical
Department Teleflex Medical Europe Ltd
Country Ireland 
Sector Private 
PI Contribution One of the major issues for biomedical devices is bacteria-induced infections arising from bacterial adhesion and subsequent biofilm formation on their surfaces. Currently, antimicrobial strategies for medical devices are dominated by coatings that release chemical agents such as antibiotics and silver ions to kill the bacteria. However, these chemical bactericidal strategies can contribute to the emergence of antimicrobial resistance (AMR). Thus, there is a pressing need to develop antibiofilm surfaces without using antibiotics or other antimicrobial agents. At present, the physics of bacteria-materials surface interactions remains poorly understood, which significantly hinders the innovative design for the next generation of anti-biofilm surfaces in biomedical devices. Therefore, in this project, we shall develop biomimetic surfaces to prevent long-term biofilm formation while retaining biocompatibility. The physical properties of many surfaces in nature (e.g. surface wettability, topography, friction and elasticity) conveys inherent antifouling qualities. We have an established track record in the design of biomimetic antifouling surfaces and biofilm characterisation (funded by EPSRC and The Royal Society). We shall also apply the knowledge obtained to relevant industrial settings. Our specific objectives are: Design and characterize surface properties of slippery surfaces for silicone catheter materials. Determine the effect of slippery surfaces under flow conditions on bacterial attachment and colonisation. Optimise antibiofilm performance and sustainability under catheter-like flow. The key outcome is to provide pilot data and collaborative outputs that will underpin a large EPSRC bid to develop antibiofilm surfaces for medical implants. We also anticipate a high-impact journal paper resulted from this new collaboration.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-309 Development of novel biomimetic surfaces to prevent biofilm formation on catheters. (Jinju Chen) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution One of the major issues for biomedical devices is bacteria-induced infections arising from bacterial adhesion and subsequent biofilm formation on their surfaces. Currently, antimicrobial strategies for medical devices are dominated by coatings that release chemical agents such as antibiotics and silver ions to kill the bacteria. However, these chemical bactericidal strategies can contribute to the emergence of antimicrobial resistance (AMR). Thus, there is a pressing need to develop antibiofilm surfaces without using antibiotics or other antimicrobial agents. At present, the physics of bacteria-materials surface interactions remains poorly understood, which significantly hinders the innovative design for the next generation of anti-biofilm surfaces in biomedical devices. Therefore, in this project, we shall develop biomimetic surfaces to prevent long-term biofilm formation while retaining biocompatibility. The physical properties of many surfaces in nature (e.g. surface wettability, topography, friction and elasticity) conveys inherent antifouling qualities. We have an established track record in the design of biomimetic antifouling surfaces and biofilm characterisation (funded by EPSRC and The Royal Society). We shall also apply the knowledge obtained to relevant industrial settings. Our specific objectives are: Design and characterize surface properties of slippery surfaces for silicone catheter materials. Determine the effect of slippery surfaces under flow conditions on bacterial attachment and colonisation. Optimise antibiofilm performance and sustainability under catheter-like flow. The key outcome is to provide pilot data and collaborative outputs that will underpin a large EPSRC bid to develop antibiofilm surfaces for medical implants. We also anticipate a high-impact journal paper resulted from this new collaboration.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-312 Development of an electrospun antimicrobial coated tampon for management of bacterial vaginosis. (Farshid Sefat) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The female vaginal tract has its own innate defence system that involves the natural microbiota, the vaginal epithelium and proteins including lactoferrin that help manage a healthy microbiome. In this project we are concerned with what happens when things go wrong with this balance. Bacterial vaginosis (BV) is a common vaginal infection with 1 in 3 pre-menopausal women in the UK suffering from BV at some point in their life. Intravaginal treatment can be impeded during menstruation and BV can often recur within a few weeks if not treated effectively. The need we have identified is to offer women a tampon to use during menstruation into which we have engineered the natural biofilm defense protein, lactoferrin. BV is characterized by a highly structured polymicrobial biofilm (Gardnerella Vaginalis (GV)), which is strongly adhered to the vaginal epithelium, therefore, assessment of biofilm management is a key element of this research work. Virustatic, already has expertise of effective delivery of lactoferrin (ViruferrinTM) to fabrics and wish to move into women's health. Aim: To fabricate an electrospun tampon coating encapsulated with Viruferrin that can manage the biofilm on the epithelial layer of vagina. Project objectives: 1) Determine the concentration of polymer/solvent for production of polymer solution for electrospinning. 2) Evaluate the concentration of Viruferrin to be added to polymer solution. 3) Fabricate a bi-layered electrospun tampon coating with various concentrations of polymer and Viruferrin. 4) Assess Viruferrin release over a time course. 5) Assess the impact of the new material on a biofilm model epithelium.
Collaborator Contribution Dr F Sefat and biomedical engineering team are contributing their time and expertise to optimise polymer concentration, fabrication and characterisation of electrospun bi-layer tampon. Prof A Paradkar and pharmaceutical engineering team are contributing their time and expertise to optimise Viruferrin concentration/release to assess release profiles over time. Prof J Thornton and Dr S Sikkink are contributing their time and expertise Viruferrin cytotoxicity and biofilm testing. Virustatic have committed £14,900 (in kind) to cover Virustatic staff time working on this project, specifically project management and coordination (Suzanna), technical input (Paul and Anna) and the commercialisation and business planning. Virustatic will also supply the Viruferrin to Bradford (£1,600 - in kind).
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-312 Development of an electrospun antimicrobial coated tampon for management of bacterial vaginosis. (Farshid Sefat) 
Organisation University of Bradford
Country United Kingdom 
Sector Academic/University 
PI Contribution The female vaginal tract has its own innate defence system that involves the natural microbiota, the vaginal epithelium and proteins including lactoferrin that help manage a healthy microbiome. In this project we are concerned with what happens when things go wrong with this balance. Bacterial vaginosis (BV) is a common vaginal infection with 1 in 3 pre-menopausal women in the UK suffering from BV at some point in their life. Intravaginal treatment can be impeded during menstruation and BV can often recur within a few weeks if not treated effectively. The need we have identified is to offer women a tampon to use during menstruation into which we have engineered the natural biofilm defense protein, lactoferrin. BV is characterized by a highly structured polymicrobial biofilm (Gardnerella Vaginalis (GV)), which is strongly adhered to the vaginal epithelium, therefore, assessment of biofilm management is a key element of this research work. Virustatic, already has expertise of effective delivery of lactoferrin (ViruferrinTM) to fabrics and wish to move into women's health. Aim: To fabricate an electrospun tampon coating encapsulated with Viruferrin that can manage the biofilm on the epithelial layer of vagina. Project objectives: 1) Determine the concentration of polymer/solvent for production of polymer solution for electrospinning. 2) Evaluate the concentration of Viruferrin to be added to polymer solution. 3) Fabricate a bi-layered electrospun tampon coating with various concentrations of polymer and Viruferrin. 4) Assess Viruferrin release over a time course. 5) Assess the impact of the new material on a biofilm model epithelium.
Collaborator Contribution Dr F Sefat and biomedical engineering team are contributing their time and expertise to optimise polymer concentration, fabrication and characterisation of electrospun bi-layer tampon. Prof A Paradkar and pharmaceutical engineering team are contributing their time and expertise to optimise Viruferrin concentration/release to assess release profiles over time. Prof J Thornton and Dr S Sikkink are contributing their time and expertise Viruferrin cytotoxicity and biofilm testing. Virustatic have committed £14,900 (in kind) to cover Virustatic staff time working on this project, specifically project management and coordination (Suzanna), technical input (Paul and Anna) and the commercialisation and business planning. Virustatic will also supply the Viruferrin to Bradford (£1,600 - in kind).
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-312 Development of an electrospun antimicrobial coated tampon for management of bacterial vaginosis. (Farshid Sefat) 
Organisation Virustatic Shield Ltd
Country United Kingdom 
Sector Private 
PI Contribution The female vaginal tract has its own innate defence system that involves the natural microbiota, the vaginal epithelium and proteins including lactoferrin that help manage a healthy microbiome. In this project we are concerned with what happens when things go wrong with this balance. Bacterial vaginosis (BV) is a common vaginal infection with 1 in 3 pre-menopausal women in the UK suffering from BV at some point in their life. Intravaginal treatment can be impeded during menstruation and BV can often recur within a few weeks if not treated effectively. The need we have identified is to offer women a tampon to use during menstruation into which we have engineered the natural biofilm defense protein, lactoferrin. BV is characterized by a highly structured polymicrobial biofilm (Gardnerella Vaginalis (GV)), which is strongly adhered to the vaginal epithelium, therefore, assessment of biofilm management is a key element of this research work. Virustatic, already has expertise of effective delivery of lactoferrin (ViruferrinTM) to fabrics and wish to move into women's health. Aim: To fabricate an electrospun tampon coating encapsulated with Viruferrin that can manage the biofilm on the epithelial layer of vagina. Project objectives: 1) Determine the concentration of polymer/solvent for production of polymer solution for electrospinning. 2) Evaluate the concentration of Viruferrin to be added to polymer solution. 3) Fabricate a bi-layered electrospun tampon coating with various concentrations of polymer and Viruferrin. 4) Assess Viruferrin release over a time course. 5) Assess the impact of the new material on a biofilm model epithelium.
Collaborator Contribution Dr F Sefat and biomedical engineering team are contributing their time and expertise to optimise polymer concentration, fabrication and characterisation of electrospun bi-layer tampon. Prof A Paradkar and pharmaceutical engineering team are contributing their time and expertise to optimise Viruferrin concentration/release to assess release profiles over time. Prof J Thornton and Dr S Sikkink are contributing their time and expertise Viruferrin cytotoxicity and biofilm testing. Virustatic have committed £14,900 (in kind) to cover Virustatic staff time working on this project, specifically project management and coordination (Suzanna), technical input (Paul and Anna) and the commercialisation and business planning. Virustatic will also supply the Viruferrin to Bradford (£1,600 - in kind).
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-324 Rapid Easy-to-use and Affordable Diagnostics for Wound - 2. (Sourav Ghosh) 
Organisation Birmingham City University
Country United Kingdom 
Sector Academic/University 
PI Contribution The larger goal: To develop an affordable point-of-care wound diagnostic test that can help in early and holistic assessment of wound infection and its prognosis, i.e., whether the wound is on a healing trajectory, by providing quantitative information on bacterial load and protease activity. Previous Proof of Concept: NBIC POC2 READ-Wound (9 months, Sep 19 - Feb 20 & Dec 20 - Feb 21): An aptamer beacon (APCON) based method, which targets a specific bacterial surface epitope and transduces the binding in a single step through 'switching on' fluorescence, was successfully validated for rapid quantitative detection of Pseudomonas aeruginosa (PA), a key wound-relevant gram-negative bacterial strain, in both planktonic and biofilm states, and determination of its sensitivity to commercial antimicrobials (refer Supplementary Information). Overall Aim of POC4 READ-Wound-2 (6 months, Aug 21 - Jan 22): To significantly advance the technology readiness level (TRL) of the "READ-Wound" test by extending its ability for determination of bacterial load and antimicrobial sensitivity to a wide range of gram-negative wound-relevant strains. This will include the validation of "broad-spectrum" aptamer beacons and biofilm disruptor enzyme panel designed in a parallel PhD research project under the supervision of the PI. The validations will be done using clinical isolates of key gram-negative wound-relevant strains in planktonic and biofilm states (Phase1: Month1-Month4) and clinical wound samples (Phase2: Month5-Month6). The project will be delivered in collaboration with industrial (Smith+Nephew), clinical (Birmingham City University) and academic (Lancaster) partners, who will provide samples and consultation on the functional requirements and performance of the test.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-324 Rapid Easy-to-use and Affordable Diagnostics for Wound - 2. (Sourav Ghosh) 
Organisation Cromerix Ltd
Country United Kingdom 
Sector Private 
PI Contribution The larger goal: To develop an affordable point-of-care wound diagnostic test that can help in early and holistic assessment of wound infection and its prognosis, i.e., whether the wound is on a healing trajectory, by providing quantitative information on bacterial load and protease activity. Previous Proof of Concept: NBIC POC2 READ-Wound (9 months, Sep 19 - Feb 20 & Dec 20 - Feb 21): An aptamer beacon (APCON) based method, which targets a specific bacterial surface epitope and transduces the binding in a single step through 'switching on' fluorescence, was successfully validated for rapid quantitative detection of Pseudomonas aeruginosa (PA), a key wound-relevant gram-negative bacterial strain, in both planktonic and biofilm states, and determination of its sensitivity to commercial antimicrobials (refer Supplementary Information). Overall Aim of POC4 READ-Wound-2 (6 months, Aug 21 - Jan 22): To significantly advance the technology readiness level (TRL) of the "READ-Wound" test by extending its ability for determination of bacterial load and antimicrobial sensitivity to a wide range of gram-negative wound-relevant strains. This will include the validation of "broad-spectrum" aptamer beacons and biofilm disruptor enzyme panel designed in a parallel PhD research project under the supervision of the PI. The validations will be done using clinical isolates of key gram-negative wound-relevant strains in planktonic and biofilm states (Phase1: Month1-Month4) and clinical wound samples (Phase2: Month5-Month6). The project will be delivered in collaboration with industrial (Smith+Nephew), clinical (Birmingham City University) and academic (Lancaster) partners, who will provide samples and consultation on the functional requirements and performance of the test.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-324 Rapid Easy-to-use and Affordable Diagnostics for Wound - 2. (Sourav Ghosh) 
Organisation Lancaster University
Country United Kingdom 
Sector Academic/University 
PI Contribution The larger goal: To develop an affordable point-of-care wound diagnostic test that can help in early and holistic assessment of wound infection and its prognosis, i.e., whether the wound is on a healing trajectory, by providing quantitative information on bacterial load and protease activity. Previous Proof of Concept: NBIC POC2 READ-Wound (9 months, Sep 19 - Feb 20 & Dec 20 - Feb 21): An aptamer beacon (APCON) based method, which targets a specific bacterial surface epitope and transduces the binding in a single step through 'switching on' fluorescence, was successfully validated for rapid quantitative detection of Pseudomonas aeruginosa (PA), a key wound-relevant gram-negative bacterial strain, in both planktonic and biofilm states, and determination of its sensitivity to commercial antimicrobials (refer Supplementary Information). Overall Aim of POC4 READ-Wound-2 (6 months, Aug 21 - Jan 22): To significantly advance the technology readiness level (TRL) of the "READ-Wound" test by extending its ability for determination of bacterial load and antimicrobial sensitivity to a wide range of gram-negative wound-relevant strains. This will include the validation of "broad-spectrum" aptamer beacons and biofilm disruptor enzyme panel designed in a parallel PhD research project under the supervision of the PI. The validations will be done using clinical isolates of key gram-negative wound-relevant strains in planktonic and biofilm states (Phase1: Month1-Month4) and clinical wound samples (Phase2: Month5-Month6). The project will be delivered in collaboration with industrial (Smith+Nephew), clinical (Birmingham City University) and academic (Lancaster) partners, who will provide samples and consultation on the functional requirements and performance of the test.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-324 Rapid Easy-to-use and Affordable Diagnostics for Wound - 2. (Sourav Ghosh) 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution The larger goal: To develop an affordable point-of-care wound diagnostic test that can help in early and holistic assessment of wound infection and its prognosis, i.e., whether the wound is on a healing trajectory, by providing quantitative information on bacterial load and protease activity. Previous Proof of Concept: NBIC POC2 READ-Wound (9 months, Sep 19 - Feb 20 & Dec 20 - Feb 21): An aptamer beacon (APCON) based method, which targets a specific bacterial surface epitope and transduces the binding in a single step through 'switching on' fluorescence, was successfully validated for rapid quantitative detection of Pseudomonas aeruginosa (PA), a key wound-relevant gram-negative bacterial strain, in both planktonic and biofilm states, and determination of its sensitivity to commercial antimicrobials (refer Supplementary Information). Overall Aim of POC4 READ-Wound-2 (6 months, Aug 21 - Jan 22): To significantly advance the technology readiness level (TRL) of the "READ-Wound" test by extending its ability for determination of bacterial load and antimicrobial sensitivity to a wide range of gram-negative wound-relevant strains. This will include the validation of "broad-spectrum" aptamer beacons and biofilm disruptor enzyme panel designed in a parallel PhD research project under the supervision of the PI. The validations will be done using clinical isolates of key gram-negative wound-relevant strains in planktonic and biofilm states (Phase1: Month1-Month4) and clinical wound samples (Phase2: Month5-Month6). The project will be delivered in collaboration with industrial (Smith+Nephew), clinical (Birmingham City University) and academic (Lancaster) partners, who will provide samples and consultation on the functional requirements and performance of the test.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-324 Rapid Easy-to-use and Affordable Diagnostics for Wound - 2. (Sourav Ghosh) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The larger goal: To develop an affordable point-of-care wound diagnostic test that can help in early and holistic assessment of wound infection and its prognosis, i.e., whether the wound is on a healing trajectory, by providing quantitative information on bacterial load and protease activity. Previous Proof of Concept: NBIC POC2 READ-Wound (9 months, Sep 19 - Feb 20 & Dec 20 - Feb 21): An aptamer beacon (APCON) based method, which targets a specific bacterial surface epitope and transduces the binding in a single step through 'switching on' fluorescence, was successfully validated for rapid quantitative detection of Pseudomonas aeruginosa (PA), a key wound-relevant gram-negative bacterial strain, in both planktonic and biofilm states, and determination of its sensitivity to commercial antimicrobials (refer Supplementary Information). Overall Aim of POC4 READ-Wound-2 (6 months, Aug 21 - Jan 22): To significantly advance the technology readiness level (TRL) of the "READ-Wound" test by extending its ability for determination of bacterial load and antimicrobial sensitivity to a wide range of gram-negative wound-relevant strains. This will include the validation of "broad-spectrum" aptamer beacons and biofilm disruptor enzyme panel designed in a parallel PhD research project under the supervision of the PI. The validations will be done using clinical isolates of key gram-negative wound-relevant strains in planktonic and biofilm states (Phase1: Month1-Month4) and clinical wound samples (Phase2: Month5-Month6). The project will be delivered in collaboration with industrial (Smith+Nephew), clinical (Birmingham City University) and academic (Lancaster) partners, who will provide samples and consultation on the functional requirements and performance of the test.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC POC 04POC21-324 Rapid Easy-to-use and Affordable Diagnostics for Wound - 2. (Sourav Ghosh) 
Organisation Smith and Nephew
Country United Kingdom 
Sector Private 
PI Contribution The larger goal: To develop an affordable point-of-care wound diagnostic test that can help in early and holistic assessment of wound infection and its prognosis, i.e., whether the wound is on a healing trajectory, by providing quantitative information on bacterial load and protease activity. Previous Proof of Concept: NBIC POC2 READ-Wound (9 months, Sep 19 - Feb 20 & Dec 20 - Feb 21): An aptamer beacon (APCON) based method, which targets a specific bacterial surface epitope and transduces the binding in a single step through 'switching on' fluorescence, was successfully validated for rapid quantitative detection of Pseudomonas aeruginosa (PA), a key wound-relevant gram-negative bacterial strain, in both planktonic and biofilm states, and determination of its sensitivity to commercial antimicrobials (refer Supplementary Information). Overall Aim of POC4 READ-Wound-2 (6 months, Aug 21 - Jan 22): To significantly advance the technology readiness level (TRL) of the "READ-Wound" test by extending its ability for determination of bacterial load and antimicrobial sensitivity to a wide range of gram-negative wound-relevant strains. This will include the validation of "broad-spectrum" aptamer beacons and biofilm disruptor enzyme panel designed in a parallel PhD research project under the supervision of the PI. The validations will be done using clinical isolates of key gram-negative wound-relevant strains in planktonic and biofilm states (Phase1: Month1-Month4) and clinical wound samples (Phase2: Month5-Month6). The project will be delivered in collaboration with industrial (Smith+Nephew), clinical (Birmingham City University) and academic (Lancaster) partners, who will provide samples and consultation on the functional requirements and performance of the test.
Collaborator Contribution Full collaborative partners in this POC project.
Impact None yet.
Start Year 2021
 
Description NBIC Seed Funding project: 01Seed20-03 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution To cystic fibrosis patients, respiratory infections can be life threatening but are still poorly understood. Here we will develop a model that can explore the interactions between different bacteria that cause these infections and will use novel technology to investigate how these bacteria interact, change, and evolve.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact None yet.
Start Year 2021
 
Description NBIC Seed Funding project: 01Seed20-03 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution To cystic fibrosis patients, respiratory infections can be life threatening but are still poorly understood. Here we will develop a model that can explore the interactions between different bacteria that cause these infections and will use novel technology to investigate how these bacteria interact, change, and evolve.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact None yet.
Start Year 2021
 
Description NBIC Seed Funding project: 01Seed20-03 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution To cystic fibrosis patients, respiratory infections can be life threatening but are still poorly understood. Here we will develop a model that can explore the interactions between different bacteria that cause these infections and will use novel technology to investigate how these bacteria interact, change, and evolve.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact None yet.
Start Year 2021
 
Description NBIC Seed Funding project: 01Seed20-05 
Organisation De Montfort University
Country United Kingdom 
Sector Academic/University 
PI Contribution Most bacteria live in protected colonies of cells called ("biofilms"). Scientists think biofilms partly offer protection through a network of DNA strands present outside the bacterial cells which form a net or matrix, but where/how this DNA comes from is a mystery. We're investigating this with atomic microscopes and genome-readers.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact Not yet.
Start Year 2021
 
Description NBIC Seed Funding project: 01Seed20-05 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Most bacteria live in protected colonies of cells called ("biofilms"). Scientists think biofilms partly offer protection through a network of DNA strands present outside the bacterial cells which form a net or matrix, but where/how this DNA comes from is a mystery. We're investigating this with atomic microscopes and genome-readers.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact Not yet.
Start Year 2021
 
Description NBIC Seed Funding project: 01Seed20-05 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution Most bacteria live in protected colonies of cells called ("biofilms"). Scientists think biofilms partly offer protection through a network of DNA strands present outside the bacterial cells which form a net or matrix, but where/how this DNA comes from is a mystery. We're investigating this with atomic microscopes and genome-readers.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact Not yet.
Start Year 2021
 
Description NBIC Seed Funding project: 01Seed20-05 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Most bacteria live in protected colonies of cells called ("biofilms"). Scientists think biofilms partly offer protection through a network of DNA strands present outside the bacterial cells which form a net or matrix, but where/how this DNA comes from is a mystery. We're investigating this with atomic microscopes and genome-readers.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact Not yet.
Start Year 2021
 
Description NBIC Seed Funding project: 01Seed20-08 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution With the conception of molecular rotors that can produce mechanical work in response to controlled external stimuli, new prospects for therapeutics and diagnostics can emerge. One such prospect is the use of ultrafast molecular nanomachines as nanodrills to specifically disrupt microbial biofilms and create surfaces with antimicrobial and self-cleaning properties.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact With the conception of molecular switches and rotors that can produce mechanical work in response to controlled external stimuli such as light, new prospects for remote-activated in vitro assays for molecular and cell biology and ultimately for in vivo therapeutics and diagnostics can emerge. This project aimed to synthesise and test an ultrafast chemical nano motor ("Nanodrill"), previously shown to dismantle bacterial membranes, against microbial biofilms by direct application and light activation. The synthesis of the nanodrill was completed successfully despite several challenges encountered in the literature proposed synthetic route. Consequently, this led to delays in the molecular rotor production and the synthetic methodology was optimised to a new synthesis procedure. Once successful synthesis and production scale-up was achieved, the nanodrill was tested for its membrane disruption effect using biophysical methods as well as in vivo bacterial cultures. Our initial results indicated the ability of the nanodrill to interfere with synthetic lipid bilayers however, no significant effect on cell viability was recorded in vivo against planktonic cultures of different bacterial pathogens. In parallel, a but-3-yn-1-ol handle was synthetically combined with the nanodrill to produce a new version that could be attached to surfaces with the aim to disrupt biofilm formation under light activation demand. The nanodrill synthesised in this project will be subject to further testing in vitro and in vivo to continue evaluating its potential use as a biofilm preventing agent on surfaces. In addition, further optimisation of the rotation characteristics of the nanodrill could also be explored to improve its efficacy in vivo and potentially be used as a disrupting agent against already established biofilms. Another important aspect that we plan to pursue further is the use of nanodrill to enhance the permeability of both bacterial cell membranes and biofilms to antimicrobials and DNA uptake and therefore increase their susceptibility to treatments and allow potential genetic engineering of these microbial communities. If preliminary results support these goals, it will undoubtedly pave the way to apply for other grants to develop the technology further.
Start Year 2020
 
Description NBIC Seed Funding project: 01Seed20-08 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution With the conception of molecular rotors that can produce mechanical work in response to controlled external stimuli, new prospects for therapeutics and diagnostics can emerge. One such prospect is the use of ultrafast molecular nanomachines as nanodrills to specifically disrupt microbial biofilms and create surfaces with antimicrobial and self-cleaning properties.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact With the conception of molecular switches and rotors that can produce mechanical work in response to controlled external stimuli such as light, new prospects for remote-activated in vitro assays for molecular and cell biology and ultimately for in vivo therapeutics and diagnostics can emerge. This project aimed to synthesise and test an ultrafast chemical nano motor ("Nanodrill"), previously shown to dismantle bacterial membranes, against microbial biofilms by direct application and light activation. The synthesis of the nanodrill was completed successfully despite several challenges encountered in the literature proposed synthetic route. Consequently, this led to delays in the molecular rotor production and the synthetic methodology was optimised to a new synthesis procedure. Once successful synthesis and production scale-up was achieved, the nanodrill was tested for its membrane disruption effect using biophysical methods as well as in vivo bacterial cultures. Our initial results indicated the ability of the nanodrill to interfere with synthetic lipid bilayers however, no significant effect on cell viability was recorded in vivo against planktonic cultures of different bacterial pathogens. In parallel, a but-3-yn-1-ol handle was synthetically combined with the nanodrill to produce a new version that could be attached to surfaces with the aim to disrupt biofilm formation under light activation demand. The nanodrill synthesised in this project will be subject to further testing in vitro and in vivo to continue evaluating its potential use as a biofilm preventing agent on surfaces. In addition, further optimisation of the rotation characteristics of the nanodrill could also be explored to improve its efficacy in vivo and potentially be used as a disrupting agent against already established biofilms. Another important aspect that we plan to pursue further is the use of nanodrill to enhance the permeability of both bacterial cell membranes and biofilms to antimicrobials and DNA uptake and therefore increase their susceptibility to treatments and allow potential genetic engineering of these microbial communities. If preliminary results support these goals, it will undoubtedly pave the way to apply for other grants to develop the technology further.
Start Year 2020
 
Description NBIC Seed Funding project: 01Seed20-08 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution With the conception of molecular rotors that can produce mechanical work in response to controlled external stimuli, new prospects for therapeutics and diagnostics can emerge. One such prospect is the use of ultrafast molecular nanomachines as nanodrills to specifically disrupt microbial biofilms and create surfaces with antimicrobial and self-cleaning properties.
Collaborator Contribution Full collaborative partners in this seed funding project.
Impact With the conception of molecular switches and rotors that can produce mechanical work in response to controlled external stimuli such as light, new prospects for remote-activated in vitro assays for molecular and cell biology and ultimately for in vivo therapeutics and diagnostics can emerge. This project aimed to synthesise and test an ultrafast chemical nano motor ("Nanodrill"), previously shown to dismantle bacterial membranes, against microbial biofilms by direct application and light activation. The synthesis of the nanodrill was completed successfully despite several challenges encountered in the literature proposed synthetic route. Consequently, this led to delays in the molecular rotor production and the synthetic methodology was optimised to a new synthesis procedure. Once successful synthesis and production scale-up was achieved, the nanodrill was tested for its membrane disruption effect using biophysical methods as well as in vivo bacterial cultures. Our initial results indicated the ability of the nanodrill to interfere with synthetic lipid bilayers however, no significant effect on cell viability was recorded in vivo against planktonic cultures of different bacterial pathogens. In parallel, a but-3-yn-1-ol handle was synthetically combined with the nanodrill to produce a new version that could be attached to surfaces with the aim to disrupt biofilm formation under light activation demand. The nanodrill synthesised in this project will be subject to further testing in vitro and in vivo to continue evaluating its potential use as a biofilm preventing agent on surfaces. In addition, further optimisation of the rotation characteristics of the nanodrill could also be explored to improve its efficacy in vivo and potentially be used as a disrupting agent against already established biofilms. Another important aspect that we plan to pursue further is the use of nanodrill to enhance the permeability of both bacterial cell membranes and biofilms to antimicrobials and DNA uptake and therefore increase their susceptibility to treatments and allow potential genetic engineering of these microbial communities. If preliminary results support these goals, it will undoubtedly pave the way to apply for other grants to develop the technology further.
Start Year 2020
 
Description NBIC Seed Funding project: 01Seed20-10 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This project aims at tackling antibiotics shortage crisis by finding a new way to prevent a major bug inhuman infections (P. aeruginosa) from producing its protective slime layer. This slime is so important for bacteria survival from antibiotic and disabling it leaves microbe vulnerable for treatments.
Collaborator Contribution Dr Fadi Soukarieh and Dr Manuel Romero at the university of Nottingham proposed the grant. They are responsible for the chemical synthesis of the nanomachines as well as the testing in biofilm setting University of Liverpool are responsible for the modification and attachment of these nanomachines to glass surfaces in the aim of inhibiting biofilm growth.
Impact None yet.
Start Year 2020
 
Description NBIC Seed Funding project: 01Seed20-10 
Organisation University of Dundee
Country United Kingdom 
Sector Academic/University 
PI Contribution This project aims at tackling antibiotics shortage crisis by finding a new way to prevent a major bug inhuman infections (P. aeruginosa) from producing its protective slime layer. This slime is so important for bacteria survival from antibiotic and disabling it leaves microbe vulnerable for treatments.
Collaborator Contribution Dr Fadi Soukarieh and Dr Manuel Romero at the university of Nottingham proposed the grant. They are responsible for the chemical synthesis of the nanomachines as well as the testing in biofilm setting University of Liverpool are responsible for the modification and attachment of these nanomachines to glass surfaces in the aim of inhibiting biofilm growth.
Impact None yet.
Start Year 2020
 
Description NBIC Seed Funding project: 01Seed20-10 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution This project aims at tackling antibiotics shortage crisis by finding a new way to prevent a major bug inhuman infections (P. aeruginosa) from producing its protective slime layer. This slime is so important for bacteria survival from antibiotic and disabling it leaves microbe vulnerable for treatments.
Collaborator Contribution Dr Fadi Soukarieh and Dr Manuel Romero at the university of Nottingham proposed the grant. They are responsible for the chemical synthesis of the nanomachines as well as the testing in biofilm setting University of Liverpool are responsible for the modification and attachment of these nanomachines to glass surfaces in the aim of inhibiting biofilm growth.
Impact None yet.
Start Year 2020
 
Description NBIC Seed Funding project: 01Seed20-10 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution This project aims at tackling antibiotics shortage crisis by finding a new way to prevent a major bug inhuman infections (P. aeruginosa) from producing its protective slime layer. This slime is so important for bacteria survival from antibiotic and disabling it leaves microbe vulnerable for treatments.
Collaborator Contribution Dr Fadi Soukarieh and Dr Manuel Romero at the university of Nottingham proposed the grant. They are responsible for the chemical synthesis of the nanomachines as well as the testing in biofilm setting University of Liverpool are responsible for the modification and attachment of these nanomachines to glass surfaces in the aim of inhibiting biofilm growth.
Impact None yet.
Start Year 2020
 
Description NERC Large Grants Outline Proposal - Anticipating and mitigating the impacts of microbially influenced corrosion in a NetZero world (NetZero-MIC) (Paulina Rakowska) 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution Developed and submitted collaborative proposal to the NERC Large Grants Scheme. Collaboration between NBIC 4-core universities (Southampton, Edinburgh, Nottingham and Liverpool) and the University of Newcastle. Funding sought: over £2,800,000.
Collaborator Contribution University of Newcastle - co-developed the proposal, PI in this potential project, with 20% grant share.
Impact Submitted outline proposal - awaiting competition results.
Start Year 2021
 
Description National Biofilm Innovation Centre 
Organisation Aberystwyth University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Aston University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Barts Health NHS Trust
Country United Kingdom 
Sector Public 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation British Geological Survey
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Brunel University London
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Canterbury Christ Church University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Cardiff University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Cranfield University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation De Montfort University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Durham University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Earlham Institute
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Edinburgh Napier University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Glasgow Caledonian University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Heriot-Watt University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Imperial College London
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation James Hutton Institute
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Keele University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation King's College London
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Lancaster University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Liverpool John Moores University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Liverpool School of Tropical Medicine
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Manchester Metropolitan University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Newcastle University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Nottingham Trent University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Plymouth Marine Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Quadram Institute Bioscience
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Queen Mary University of London
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Sheffield Hallam University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Swansea University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation Teesside University
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Aberdeen
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Bath
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Bradford
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Bristol
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Cambridge
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Dundee
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of East Anglia
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Essex
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Exeter
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Hertfordshire
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Huddersfield
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Kent
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Leeds
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Lincoln
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Manchester
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Oxford
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Portsmouth
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of St Andrews
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Strathclyde
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Surrey
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Sussex
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of Warwick
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of York
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of the Highlands and Islands
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description National Biofilm Innovation Centre 
Organisation University of the West of England
Country United Kingdom 
Sector Academic/University 
PI Contribution 1) Sectorial workshops with NBIC Company / Academic Community. This gives the opportunity to form links and possible POC projects to be identified. 2) Holding Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. This gives the opportunity to influence NBIC strategy and funding calls. 3) Identifying NBIC fully or part funded Strategic Research (Defined by Sectorial Workshops and approved by Boards). 4) Providing access to POC calls aligned with NBIC Strategy along with Industrial Partner via Sector or Theme. Competitive transparent Open Process Univ signed up to NBIC with companies willing to sign Project Agreement. Selected using range of criteria within a template case. Support in POC submissions and advice from NBIC engagement officers 5) Facilitating collaborative Access to facilities (eg Diamond / Hartree) (Note Science and Industrial Advisory Boards will have regular review and input into these processes and content of themes etc)
Collaborator Contribution 1) Participation in Scientific NBIC Forum around key themes to establish consensus areas and key unanswered questions. 2) Application to the NBIC Proof of Concept funding for translational research projects 3) Application to studentships and placements with industrial partners
Impact NBIC has awarded 65 Proof of Concept projects, these projects are with the academic partners lists and industry collaborators. We have held three workshop (Biofilm detection, engineering and management), also see publications. The National Biofilms innovation centre is working across disciplines, including: engineering, chemistry, surface and interface science, functional materials, soft matter and non-equilibrium physics, environmental sciences, microbiology, 'omics, bioinformatics, computation and advanced techniques.
Start Year 2018
 
Description Ongoing collaboration with Veolia UK Ltd (Gavin Melaugh) 
Organisation Veolia Environmental Services
Country United Kingdom 
Sector Private 
PI Contribution I have engaged with Veolia UK Ltd (Edinburgh) on several occasions throughout the the last year. We currently have a senior honours student analysing 1000s of microscopic images of bacteria samples from 3 wastewater treatment sites in Scotland to develop machine learning algorithms for wastewater treatment. We also hosted Veolia employees for a day of knowledge exchange that included a a tour of our labs and facilities.
Collaborator Contribution Veolia have provided us with 1000s of images of microscopic images of bacteria samples from 3 wastewater treatment sites in Scotland to develop machine learning algorithms for wastewater treatment. Veolia also gave us a tour of their site in Edinburgh as part of a knowledge exchange day.
Impact BBSRC - Impact acceleration award. NBIC POC project.
Start Year 2019
 
Description PBO Net Field Stability Study 
Organisation Liverpool School of Tropical Medicine
Country United Kingdom 
Sector Academic/University 
PI Contribution Using surface analytical techniques to investigate vector control products created by international companies.
Collaborator Contribution Partner LSTM is conducting field trails on the products.
Impact Research papers being written, input into product design for companies, policy guidance being prepared fro WHO.
Start Year 2021
 
Description Participation in SOFI2 CDT programme 
Organisation Kimal
Country Germany 
Sector Private 
PI Contribution We have embarked on co-supervision of a PhD student as part of the SOFI2 CDT programme
Collaborator Contribution In-kind contributions through regular meetings and supply of products.
Impact None as yet
Start Year 2020
 
Description PhD Addressing the Risk of Antimicrobial Resistance via Advanced Coatings and Monitoring Techniques (Rasmita Raval) 
Organisation Croda International
Country United Kingdom 
Sector Private 
PI Contribution Supervision and training.
Collaborator Contribution Supervision and funding.
Impact PhD
Start Year 2018
 
Description PhD Addressing the Risk of Antimicrobial Resistance via Advanced Coatings and Monitoring Techniques (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Supervision and training.
Collaborator Contribution Supervision and funding.
Impact PhD
Start Year 2018
 
Description PhD Analysis of Immune responses to P. aeruginosa biofilms in the context of wounds (Miguel Camara) 
Organisation Government of Saudi Arabia
Country Saudi Arabia 
Sector Public 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Analysis of Immune responses to P. aeruginosa biofilms in the context of wounds (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Analysis of immune responses to P. aeruginosa biofilms (Miguel Camara) 
Organisation Government of Bangladesh
Country Bangladesh 
Sector Public 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2021
 
Description PhD Analysis of immune responses to P. aeruginosa biofilms (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2021
 
Description PhD Assessing impact of ozone on viability of foodborne and food spoilage pathogens on fresh produce (Nicola Holden) 
Organisation Anacail Ltd
Country United Kingdom 
Sector Private 
PI Contribution Training, supervision and funding for this PhD project.
Collaborator Contribution Training, supervision and funding for this PhD project. The funding is from the BBSRC via the University of Oxford DTP
Impact None yet.
Start Year 2018
 
Description PhD Assessing impact of ozone on viability of foodborne and food spoilage pathogens on fresh produce (Nicola Holden) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding for this PhD project.
Collaborator Contribution Training, supervision and funding for this PhD project. The funding is from the BBSRC via the University of Oxford DTP
Impact None yet.
Start Year 2018
 
Description PhD Assessing impact of ozone on viability of foodborne and food spoilage pathogens on fresh produce (Nicola Holden) 
Organisation Scotland's Rural College
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding for this PhD project.
Collaborator Contribution Training, supervision and funding for this PhD project. The funding is from the BBSRC via the University of Oxford DTP
Impact None yet.
Start Year 2018
 
Description PhD Assessing impact of ozone on viability of foodborne and food spoilage pathogens on fresh produce (Nicola Holden) 
Organisation University of Oxford
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding for this PhD project.
Collaborator Contribution Training, supervision and funding for this PhD project. The funding is from the BBSRC via the University of Oxford DTP
Impact None yet.
Start Year 2018
 
Description PhD Biofilm matrix assembly by Bacillus subtilis (Nicola Stanley-Wall) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding. http://www.eastscotbiodtp.ac.uk/
Impact None yet.
Start Year 2018
 
Description PhD Biofilm matrix assembly by Bacillus subtilis (Nicola Stanley-Wall) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact None yet.
Start Year 2020
 
Description PhD Biofilm matrix assembly by Bacillus subtilis (Nicola Stanley-Wall) 
Organisation University of Dundee
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding. http://www.eastscotbiodtp.ac.uk/
Impact None yet.
Start Year 2018
 
Description PhD Biofilm matrix assembly by Bacillus subtilis (Nicola Stanley-Wall) 
Organisation University of Dundee
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact None yet.
Start Year 2020
 
Description PhD Biofilm matrix assembly by Bacillus subtilis (Nicola Stanley-Wall) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact None yet.
Start Year 2020
 
Description PhD Biofilm matrix assembly by Bacillus subtilis (Nicola Stanley-Wall) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding. http://www.eastscotbiodtp.ac.uk/
Impact None yet.
Start Year 2018
 
Description PhD Biomaterial modulation for diagnostic and therapeutic benefit in catheter-associated urinary tract infection (David Williams) 
Organisation Cardiff University
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2017
 
Description PhD Biomaterial modulation for diagnostic and therapeutic benefit in catheter-associated urinary tract infection (David Williams) 
Organisation Knowledge Economy Skills Scholarships (KESS)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2017
 
Description PhD Biomaterial modulation for diagnostic and therapeutic benefit in catheter-associated urinary tract infection (David Williams) 
Organisation Technovent Ltd
Country United Kingdom 
Sector Private 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2017
 
Description PhD Cell-cell signalling and the regulation of virulence and biofilm formation in the respiratory pathogen (Jeremy Webb) 
Organisation Chinese Scholarship Council
Country China 
Sector Charity/Non Profit 
PI Contribution Supervision and training.
Collaborator Contribution Funding.
Impact PhD.
Start Year 2019
 
Description PhD Cell-cell signalling and the regulation of virulence and biofilm formation in the respiratory pathogen (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Supervision and training.
Collaborator Contribution Funding.
Impact PhD.
Start Year 2019
 
Description PhD Charactisation and Evaluation of Anti-Biofilms Complexes on biofilms interference on wound and medical devices related infections (Miguel Camara) 
Organisation 5D Health Protection Group Ltd
Country United Kingdom 
Sector Private 
PI Contribution Finance and supervision of PhD student.
Collaborator Contribution Finance and supervision of PhD student.
Impact PhD.
Start Year 2019
 
Description PhD Charactisation and Evaluation of Anti-Biofilms Complexes on biofilms interference on wound and medical devices related infections (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Finance and supervision of PhD student.
Collaborator Contribution Finance and supervision of PhD student.
Impact PhD.
Start Year 2019
 
Description PhD Combating Antibiotic Tolerance In Bacterial Biofilms - the BdlA/DipA Dispersal Pathway (Jeremy Webb) 
Organisation Diamond Light Source
Country United Kingdom 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Supervision and funding.
Impact PhD
Start Year 2019
 
Description PhD Combating Antibiotic Tolerance In Bacterial Biofilms - the BdlA/DipA Dispersal Pathway (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Supervision and funding.
Impact PhD
Start Year 2019
 
Description PhD Contribution of carbohydrates to immune responses to P. aeruginosa biofilms (Luisa Martinez Pomares) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Creating Advanced Anti-Bacterial and Anti-Viral Surfaces and Materials (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Creating Precision-Engineered Functionalised Surfaces (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Current and emerging therapies for corneal infection: a clinical and laboratory study (Miguel Camara) 
Organisation Medical Research Council (MRC)
Country United Kingdom 
Sector Public 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact PhD successfully completed.
Start Year 2018
 
Description PhD Current and emerging therapies for corneal infection: a clinical and laboratory study (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact PhD successfully completed.
Start Year 2018
 
Description PhD Degradation of polyethylene terephthalate and polyethylene by a novel plastic degrading bacteria. (Sam Bryan) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution The summary is the same as the one originally submitted for the project. A third of all plastics end up in the environment with 165 million tons ending up in the oceans creating vast accumulations of life choking rubbish, which has devastating consequences for marine life, recently highlighted in Blue Planet (BBC). Only 9% of plastic gets recycled and even then, only a limited number of times due to thermal degradation. The remaining plastic pollutes the environment or sits in landfill sites, where it can take up to 500 years to decompose, leaching toxic chemicals into the ground. Traditional plastics such as the polyester poly (ethylene terephthalate) (PET) are made from oil based raw materials. PET makes up almost one sixth of the world's annual plastic production of 311m tons. Around 41m tons of PET was produced in 2013 and this is projected to increase to 73m tons by 2020. Despite being one of the more commonly recycled plastics, only half is ever collected and recycled, considerably less actually ends up being reused. Bioplastic polyesters (bio-based and/or biodegradable) offer a sustainable alternative given their lower carbon footprint and often faster decomposition. Unfortunately, at present, a significant proportion of next generation biodegradable polyesters end up in landfill, where anoxic degradation results in significant atmospheric release of methane, a greenhouse gas 23 times more potent than carbon dioxide (CO2). Aims The overall project aims to implement the degradation of PET and several bioplastic polyesters in Cupriavidus metallidurans; a robust metabolically diverse microorganism cell factory, capable of utilising CO2 as a carbon source. Objectives The primary objective being to express non-native Petase and Lipase proteins in C. metallidurans and couple this to biomass. Engineered strains will be subject to metabolomic characterisation (metabolic phenotyping) to estimate intra and extracellular metabolic fluxes. Conventional liquid chromatography (LC)-mass spectrometry (MS)-based metabolomics and stable isotope-assisted metabolic pathway analysis methods, coupled with 13C flux will be utilised to predict in vivo enzyme reaction rates, unravelling metabolism and providing exemplar kinetic data, allowing for the development of designer strain with improved plastic degradation. Directed evolution will be utilised to engineer enzymes with improved degradation properties. Designer strains will then be characterised in continuous fermentation.
Collaborator Contribution Training, supervision and funding
Impact None yet.
Start Year 2019
 
Description PhD Degradation of polyethylene terephthalate and polyethylene by a novel plastic degrading bacteria. (Sam Bryan) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution The summary is the same as the one originally submitted for the project. A third of all plastics end up in the environment with 165 million tons ending up in the oceans creating vast accumulations of life choking rubbish, which has devastating consequences for marine life, recently highlighted in Blue Planet (BBC). Only 9% of plastic gets recycled and even then, only a limited number of times due to thermal degradation. The remaining plastic pollutes the environment or sits in landfill sites, where it can take up to 500 years to decompose, leaching toxic chemicals into the ground. Traditional plastics such as the polyester poly (ethylene terephthalate) (PET) are made from oil based raw materials. PET makes up almost one sixth of the world's annual plastic production of 311m tons. Around 41m tons of PET was produced in 2013 and this is projected to increase to 73m tons by 2020. Despite being one of the more commonly recycled plastics, only half is ever collected and recycled, considerably less actually ends up being reused. Bioplastic polyesters (bio-based and/or biodegradable) offer a sustainable alternative given their lower carbon footprint and often faster decomposition. Unfortunately, at present, a significant proportion of next generation biodegradable polyesters end up in landfill, where anoxic degradation results in significant atmospheric release of methane, a greenhouse gas 23 times more potent than carbon dioxide (CO2). Aims The overall project aims to implement the degradation of PET and several bioplastic polyesters in Cupriavidus metallidurans; a robust metabolically diverse microorganism cell factory, capable of utilising CO2 as a carbon source. Objectives The primary objective being to express non-native Petase and Lipase proteins in C. metallidurans and couple this to biomass. Engineered strains will be subject to metabolomic characterisation (metabolic phenotyping) to estimate intra and extracellular metabolic fluxes. Conventional liquid chromatography (LC)-mass spectrometry (MS)-based metabolomics and stable isotope-assisted metabolic pathway analysis methods, coupled with 13C flux will be utilised to predict in vivo enzyme reaction rates, unravelling metabolism and providing exemplar kinetic data, allowing for the development of designer strain with improved plastic degradation. Directed evolution will be utilised to engineer enzymes with improved degradation properties. Designer strains will then be characterised in continuous fermentation.
Collaborator Contribution Training, supervision and funding
Impact None yet.
Start Year 2019
 
Description PhD Developing novel antibiotics from natural products against resistant bacteria (Rasmita Raval) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact None yet.
Start Year 2020
 
Description PhD Developing novel antibiotics from natural products against resistant bacteria (Rasmita Raval) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact None yet.
Start Year 2020
 
Description PhD Developing novel antibiotics from natural products against resistant bacteria (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact None yet.
Start Year 2020
 
Description PhD Development of New Antimicrobial Therapeutics and Targeted Delivery Techniques for Antibiofilm Therapy (working title) (Eleanor Stride, Dario Carugo) 
Organisation Innovate UK
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact PhD
Start Year 2021
 
Description PhD Development of New Antimicrobial Therapeutics and Targeted Delivery Techniques for Antibiofilm Therapy (working title) (Eleanor Stride, Dario Carugo) 
Organisation University College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact PhD
Start Year 2021
 
Description PhD Development of New Antimicrobial Therapeutics and Targeted Delivery Techniques for Antibiofilm Therapy (working title) (Eleanor Stride, Dario Carugo) 
Organisation University of Oxford
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact PhD
Start Year 2021
 
Description PhD Development of polymicrobial biofilms for P. aeruginosa therapeutic interventions (Miguel Camara) 
Organisation Cystic Fibrosis Foundation
Department Cystic Fibrosis Foundation Therapeutics
Country United States 
Sector Charity/Non Profit 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Development of polymicrobial biofilms for P. aeruginosa therapeutic interventions (Miguel Camara) 
Organisation Cystic Fibrosis Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Development of polymicrobial biofilms for P. aeruginosa therapeutic interventions (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Drug delivery systems against Pseudomonas aeruginosa for combination therapy (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2020
 
Description PhD Drug delivery systems against Pseudomonas aeruginosa for combination therapy (Miguel Camara) 
Organisation Wellcome Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2020
 
Description PhD Effect of surface conditioning and microbial interactions on denture biofilms (David Williams) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2018
 
Description PhD Effect of surface conditioning and microbial interactions on denture biofilms (David Williams) 
Organisation Cardiff University
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2018
 
Description PhD Effect of surface conditioning and microbial interactions on denture biofilms (David Williams) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2018
 
Description PhD Exploiting 'big data' OMICs to model biofilm actives (BB/V509541/1) (Gordon Ramage) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2021
 
Description PhD Exploiting 'big data' OMICs to model biofilm actives (BB/V509541/1) (Gordon Ramage) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2021
 
Description PhD Exploiting 'big data' OMICs to model biofilm actives (BB/V509541/1) (Gordon Ramage) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2021
 
Description PhD Exploring innovative regenerative scaffolds for simultaneous bacteria/host monitoring and healing promotion (Mat Hardman) 
Organisation Neotherix Ltd
Country United Kingdom 
Sector Private 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Exploring innovative regenerative scaffolds for simultaneous bacteria/host monitoring and healing promotion (Mat Hardman) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Formulation of PHMB-based nanoparticles for targeted killing of zoonotic fungi (Peter Monk [Winnie Ntow-Boahenne]) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, funding and supervision for this PhD project.
Collaborator Contribution Training, funding and supervision for this PhD project.
Impact PhD.
Start Year 2017
 
Description PhD Formulation of PHMB-based nanoparticles for targeted killing of zoonotic fungi (Peter Monk [Winnie Ntow-Boahenne]) 
Organisation Blueberry Therapeutics
Country United Kingdom 
Sector Private 
PI Contribution Training, funding and supervision for this PhD project.
Collaborator Contribution Training, funding and supervision for this PhD project.
Impact PhD.
Start Year 2017
 
Description PhD Formulation of PHMB-based nanoparticles for targeted killing of zoonotic fungi (Peter Monk [Winnie Ntow-Boahenne]) 
Organisation Tecrea Ltd
Country United Kingdom 
Sector Private 
PI Contribution Training, funding and supervision for this PhD project.
Collaborator Contribution Training, funding and supervision for this PhD project.
Impact PhD.
Start Year 2017
 
Description PhD Formulation of PHMB-based nanoparticles for targeted killing of zoonotic fungi (Peter Monk [Winnie Ntow-Boahenne]) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, funding and supervision for this PhD project.
Collaborator Contribution Training, funding and supervision for this PhD project.
Impact PhD.
Start Year 2017
 
Description PhD Holding the front line -maintaining barrier integrity in the mouth (Gordon Ramage) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding. BBSRC funding reference: BB/W510099/1
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2021
 
Description PhD Holding the front line -maintaining barrier integrity in the mouth (Gordon Ramage) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Training, supervision and funding. BBSRC funding reference: BB/W510099/1
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2021
 
Description PhD Holding the front line -maintaining barrier integrity in the mouth (Gordon Ramage) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding. BBSRC funding reference: BB/W510099/1
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2021
 
Description PhD Industrial studentship. 'Commercialising biofilm assays'.(Gordon Ramage) 
Organisation BluTest Laboratories Limited
Country United Kingdom 
Sector Private 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD.
Start Year 2017
 
Description PhD Industrial studentship. 'Commercialising biofilm assays'.(Gordon Ramage) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD.
Start Year 2017
 
Description PhD Interaction of polymicrobial biofilms with human immune cells (Miguel Camara) 
Organisation Medical Research Council (MRC)
Country United Kingdom 
Sector Public 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2018
 
Description PhD Interaction of polymicrobial biofilms with human immune cells (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2018
 
Description PhD Investigating the immune-modulatory and wound healing effects of Reactive Oxygen® (RO-101®) (Jeremy Webb) 
Organisation Matoke Holdings
Country United Kingdom 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description PhD Investigating the immune-modulatory and wound healing effects of Reactive Oxygen® (RO-101®) (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description PhD Managing biofilms and disinfection residuals to protecting drinking water safety (Katherine Fish) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Managing biofilms and disinfection residuals to protecting drinking water safety (Katherine Fish) 
Organisation Scottish Water
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Managing biofilms and disinfection residuals to protecting drinking water safety (Katherine Fish) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Microbial biotechnology approaches to optimize chemical oxygen demand and enhance nitrogen and phosphorus removal in wastewater treatment (Jeremy Webb, Yongqiang Liu) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Funding, supervision and training.
Collaborator Contribution Funding, supervision and training.
Impact PhD
Start Year 2021
 
Description PhD Microbial biotechnology approaches to optimize chemical oxygen demand and enhance nitrogen and phosphorus removal in wastewater treatment (Jeremy Webb, Yongqiang Liu) 
Organisation Plantwork Systems (PWS) Ltd
Country United Kingdom 
Sector Private 
PI Contribution Funding, supervision and training.
Collaborator Contribution Funding, supervision and training.
Impact PhD
Start Year 2021
 
Description PhD Microbial biotechnology approaches to optimize chemical oxygen demand and enhance nitrogen and phosphorus removal in wastewater treatment (Jeremy Webb, Yongqiang Liu) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training.
Collaborator Contribution Funding, supervision and training.
Impact PhD
Start Year 2021
 
Description PhD Microbiologically-influenced corrosion (MIC): Development of a model system to investigate the role of biofilm communities within MIC and their control using industrial biocides. (Jeremy Webb) 
Organisation DNV GL
Country Norway 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2020
 
Description PhD Microbiologically-influenced corrosion (MIC): Development of a model system to investigate the role of biofilm communities within MIC and their control using industrial biocides. (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2020
 
Description PhD Modelling bacterial biofilms in spatially heterogeneous environments (Rosalind Allen) 
Organisation AkzoNobel
Department AkzoNobel UK
Country United Kingdom 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2017
 
Description PhD Modelling bacterial biofilms in spatially heterogeneous environments (Rosalind Allen) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2017
 
Description PhD Modelling bacterial biofilms in spatially heterogeneous environments (Rosalind Allen) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2017
 
Description PhD Multi-mode microscopy to probe bacteria-surface interactions (reference 100317) (Paul Williams) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Training, funding and supervision.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description PhD Multi-mode microscopy to probe bacteria-surface interactions (reference 100317) (Paul Williams) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, funding and supervision.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description PhD Multi-mode microscopy to probe bacteria-surface interactions in oral health (Morgan Alexander) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Multi-mode microscopy to probe bacteria-surface interactions in oral health (Morgan Alexander) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Multi-mode microscopy to probe bacteria-surface interactions in oral health (Morgan Alexander) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Multi-mode microscopy to probe bacteria-surface interactions in oral health (Morgan Alexander) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Nanoclay gels for sustained localised antimicrobial delivery to aid bone repair (Jonathan Ian Dawson) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD New Testing methods for Oral care (Yuri Diaz Fernandez) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training and supervision.
Collaborator Contribution Supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD New Testing methods for Oral care (Yuri Diaz Fernandez) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD New Testing methods for Oral care (Yuri Diaz Fernandez) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Novel 3D Printing approaches to induce intestinal epithelium development from adult (Felicity Rose) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2021
 
Description PhD Novel 3D Printing approaches to induce intestinal epithelium development from adult (Felicity Rose) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2021
 
Description PhD Novel 3D Printing approaches to induce intestinal epithelium development from adult (Felicity Rose) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2021
 
Description PhD Novel approaches to detect and treat Pseudomonas aeruginosa antibiotic-resistant biofilms in cystic fibrosis (Miguel Camara) 
Organisation Cystic Fibrosis Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Training and supervision of PhD student.
Collaborator Contribution Training and supervision of PhD student.
Impact PhD.
Start Year 2019
 
Description PhD Novel approaches to detect and treat Pseudomonas aeruginosa antibiotic-resistant biofilms in cystic fibrosis (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision of PhD student.
Collaborator Contribution Training and supervision of PhD student.
Impact PhD.
Start Year 2019
 
Description PhD Oral biofilms: A fundamental understanding to target improved oral health and breath freshness (Mondelez CTP Studentship) (Jeremy Webb) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training and supervision.
Collaborator Contribution Funding and supervision. BBSRC grant reference BB/S506862/1.
Impact PhD
Start Year 2018
 
Description PhD Oral biofilms: A fundamental understanding to target improved oral health and breath freshness (Mondelez CTP Studentship) (Jeremy Webb) 
Organisation Mondelez International
Country United States 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Funding and supervision. BBSRC grant reference BB/S506862/1.
Impact PhD
Start Year 2018
 
Description PhD Oral biofilms: A fundamental understanding to target improved oral health and breath freshness (Mondelez CTP Studentship) (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Funding and supervision. BBSRC grant reference BB/S506862/1.
Impact PhD
Start Year 2018
 
Description PhD Personalised Approach to Pseudomonas aeruginosa (PAPA) (Jeremy Webb) 
Organisation Cystic Fibrosis Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Training and supervision.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2018
 
Description PhD Personalised Approach to Pseudomonas aeruginosa (PAPA) (Jeremy Webb) 
Organisation Imperial College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2018
 
Description PhD Personalised Approach to Pseudomonas aeruginosa (PAPA) (Jeremy Webb) 
Organisation NIHR Southampton Biomedical Research Centre
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2018
 
Description PhD Personalised Approach to Pseudomonas aeruginosa (PAPA) (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2018
 
Description PhD Profiling the mycobacteria biofilm: a multidisciplinary mix of mutants and mass spectrometry (Suzanne Hingley-Wilson) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, funding and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2018
 
Description PhD Profiling the mycobacteria biofilm: a multidisciplinary mix of mutants and mass spectrometry (Suzanne Hingley-Wilson) 
Organisation National Physical Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, funding and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2018
 
Description PhD Profiling the mycobacteria biofilm: a multidisciplinary mix of mutants and mass spectrometry (Suzanne Hingley-Wilson) 
Organisation University of Surrey
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, funding and supervision.
Collaborator Contribution Training, funding and supervision.
Impact PhD
Start Year 2018
 
Description PhD Rapid detection of pathogens within cooling towers (Katherine Fish) 
Organisation Health and Safety Executive (HSE)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Rapid detection of pathogens within cooling towers (Katherine Fish) 
Organisation Sellafield Ltd
Country United Kingdom 
Sector Private 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Rapid detection of pathogens within cooling towers (Katherine Fish) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Role of inflammatory monocytes during C. albicans infection (Miguel Camara) 
Organisation Government of Saudi Arabia
Country Saudi Arabia 
Sector Public 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2021
 
Description PhD Role of inflammatory monocytes during C. albicans infection (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2021
 
Description PhD Role of the stringent response to promote biocide induced antibiotic tolerance in Staphylococcus aureus biofilms (Kim Hardie) 
Organisation Eberhard Karls University of Tübingen
Country Germany 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Role of the stringent response to promote biocide induced antibiotic tolerance in Staphylococcus aureus biofilms (Kim Hardie) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD.
Collaborator Contribution Funding, supervision and training for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Silencing virulence signalling through the optimisation of novel pqsR antagonists (Miguel Camara) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Funding, supervision and training for this PhD
Collaborator Contribution Funding, supervision and training for this PhD
Impact PhD successfully completed.
Start Year 2018
 
Description PhD Silencing virulence signalling through the optimisation of novel pqsR antagonists (Miguel Camara) 
Organisation Wellcome Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Funding, supervision and training for this PhD
Collaborator Contribution Funding, supervision and training for this PhD
Impact PhD successfully completed.
Start Year 2018
 
Description PhD Structure-Activity Mechanistic Study of Novel Antimicrobial Coatings on Glass (Rasmita Raval) 
Organisation Pilkington Glass
Country United Kingdom 
Sector Private 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Structure-Activity Mechanistic Study of Novel Antimicrobial Coatings on Glass (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Targeting cyclic di-GMP signalling as a route towards controlling bacterial biofilm formation during infection (Jeremy Webb) 
Organisation Chinese Scholarship Council
Country China 
Sector Charity/Non Profit 
PI Contribution Supervision and training.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description PhD Targeting cyclic di-GMP signalling as a route towards controlling bacterial biofilm formation during infection (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Supervision and training.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description PhD The development of novel nanomaterial based, low carbon structures for improved infection control in water systems 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Funding.
Impact PhD
Start Year 2020
 
Description PhD The physics of biofilms on venous catheters (Susana Direito, Rosalind Allen) 
Organisation Kimal
Country Germany 
Sector Private 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training and supervision.
Impact PhD
Start Year 2020
 
Description PhD The physics of biofilms on venous catheters (Susana Direito, Rosalind Allen) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training and supervision.
Impact PhD
Start Year 2020
 
Description PhD Tuneable Size and Shape Selected Zinc Oxide Nanoparticles for Antimicrobial Coatings (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding for this PhD.
Collaborator Contribution Training, supervision and funding for this PhD.
Impact None yet.
Start Year 2022
 
Description PhD Ultrasound-activated Agents for the Treatment of Chronic Wound Biofilms and Wound Tissue (working title) (Dario Carugo) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Ultrasound-activated Agents for the Treatment of Chronic Wound Biofilms and Wound Tissue (working title) (Dario Carugo) 
Organisation University College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Ultrasound-activated Agents for the Treatment of Chronic Wound Biofilms and Wound Tissue (working title) (Dario Carugo) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Training, supervision and funding.
Collaborator Contribution Training, supervision and funding.
Impact PhD
Start Year 2020
 
Description PhD Understanding Synergistic Antimicrobial Technologies using Advanced Physical and Biological Sciences Techniques (Rasmita Raval) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution Training and supervision.
Collaborator Contribution Funding and supervision.
Impact PhD
Start Year 2019
 
Description PhD Understanding Synergistic Antimicrobial Technologies using Advanced Physical and Biological Sciences Techniques (Rasmita Raval) 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Funding and supervision.
Impact PhD
Start Year 2019
 
Description PhD Understanding Synergistic Antimicrobial Technologies using Advanced Physical and Biological Sciences Techniques (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Funding and supervision.
Impact PhD
Start Year 2019
 
Description PhD Understanding plastic pollution to mitigate impact to freshwaters and services (Rachel Gomes, Steve Howdle, Matthew Johnson) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution Macro and micro plastic are unregulated water pollutants with significant implications to service provision (e.g. water treatment), as well as generating considerable public and political concern. To deliver solutions to the plastic pollution pandemic, we need first to understand the extent of plastic pollution and how environmental conditions influence plastic fate and impact on water quality. Environmental conditions are complex and variable that lead to fragmentation and a changing condition of the plastic due to abiotic and biotic degradation. The condition of waste plastic (versus as manufactured) will influence the pollution severity and impact to freshwater function and services. Characterising plastic under dynamic conditions require analytics able to elucidate the plastic presence and fate processes involved. This project will aim to understand the extent and impact of plastic pollution on water quality and services through the use of established (e.g. SEM FTIR) and emerging (e.g. 3D ToF-SIMS) analytics. Outcomes will serve to understand how plastic interacts with its surrounding complex environment and implications to water quality and use by society
Collaborator Contribution Training, supervision and funding.
Impact None yet.
Start Year 2021
 
Description PhD Understanding plastic pollution to mitigate impact to freshwaters and services (Rachel Gomes, Steve Howdle, Matthew Johnson) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Macro and micro plastic are unregulated water pollutants with significant implications to service provision (e.g. water treatment), as well as generating considerable public and political concern. To deliver solutions to the plastic pollution pandemic, we need first to understand the extent of plastic pollution and how environmental conditions influence plastic fate and impact on water quality. Environmental conditions are complex and variable that lead to fragmentation and a changing condition of the plastic due to abiotic and biotic degradation. The condition of waste plastic (versus as manufactured) will influence the pollution severity and impact to freshwater function and services. Characterising plastic under dynamic conditions require analytics able to elucidate the plastic presence and fate processes involved. This project will aim to understand the extent and impact of plastic pollution on water quality and services through the use of established (e.g. SEM FTIR) and emerging (e.g. 3D ToF-SIMS) analytics. Outcomes will serve to understand how plastic interacts with its surrounding complex environment and implications to water quality and use by society
Collaborator Contribution Training, supervision and funding.
Impact None yet.
Start Year 2021
 
Description PhD Viscoelasticity and Associated-drag of Artificial and Natural Marine Fouling Biofilm (Jeremy Webb) 
Organisation AkzoNobel
Department AkzoNobel UK
Country United Kingdom 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description PhD Viscoelasticity and Associated-drag of Artificial and Natural Marine Fouling Biofilm (Jeremy Webb) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description PhD Wellcome Trust, DTP in Antimicrobials & Antimicrobial Resistance: Novel biomaterials to stop biofilm formation on blood contacting catheters (108876/Z/15/Z) (Paul Williams) 
Organisation University of Nottingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description PhD Wellcome Trust, DTP in Antimicrobials & Antimicrobial Resistance: Novel biomaterials to stop biofilm formation on blood contacting catheters (108876/Z/15/Z) (Paul Williams) 
Organisation Wellcome Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Training and supervision.
Collaborator Contribution Funding.
Impact PhD
Start Year 2019
 
Description Polident: Tablet Kinetics and Stability Studies (Claudio Lourenco) 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Alongside this project, GSK also sponsored another project through Science Exchange, Inc. With the aim to further understand the chemistry of one of their products and compare it novel formulations. This was not directly related to this award but came as a result of the quality of previous and current work (this award) conducted at UCL. This secondary project brought another players from GSK-CH and consolidated the partnership between UCL and GSK. My role was as researcher and conducted all the necessary experiments and prepared presentations throughout the project to update GSK on the developments and findings of the project.
Collaborator Contribution GSK as main partner funded this project and closely monitored the development of the project. We had periodical meetings (online) with the key stakeholders from GSK and UCL to receive their inputs and direct the research towards their objectives and present the data accordingly.
Impact A comprehensive report (50 pages) was elaborated comprising all the relevant findings, discussion and conclusions and guidelines for future work.
Start Year 2020
 
Description Polident: Tablet Kinetics and Stability Studies (Claudio Lourenco) 
Organisation University College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Alongside this project, GSK also sponsored another project through Science Exchange, Inc. With the aim to further understand the chemistry of one of their products and compare it novel formulations. This was not directly related to this award but came as a result of the quality of previous and current work (this award) conducted at UCL. This secondary project brought another players from GSK-CH and consolidated the partnership between UCL and GSK. My role was as researcher and conducted all the necessary experiments and prepared presentations throughout the project to update GSK on the developments and findings of the project.
Collaborator Contribution GSK as main partner funded this project and closely monitored the development of the project. We had periodical meetings (online) with the key stakeholders from GSK and UCL to receive their inputs and direct the research towards their objectives and present the data accordingly.
Impact A comprehensive report (50 pages) was elaborated comprising all the relevant findings, discussion and conclusions and guidelines for future work.
Start Year 2020
 
Description Proposal to the European Partnership on Metrology - Green Call 
Organisation National metrology and testing laboratory
Country France 
Sector Public 
PI Contribution Partner in an European consortium of 14 partners. Proposal title: Metrology supported solutions to understand and control antimicrobial resistance in the environment. Project value € 2264810 with NBIC share of € 200000
Collaborator Contribution Jointly developed and submitted the proposal.
Impact Submitted proposal - awaiting results.
Start Year 2021
 
Description Proposal to the UK-Singapore Universities Kickstarter Fund (UUKi/UK SIN-SG bid to BEIS) 
Organisation Nanyang Technological University
Country Singapore 
Sector Academic/University 
PI Contribution Developed application for the UUKi/UK SIN-SG bid to BEIS in collaboration with the Singapore SNBC and the UK's National Physical Laboratory to kick start research and evaluate previous project results in biofilm standardisation. Grant value: £50000
Collaborator Contribution SCELSE committed to in-kind contributions to the salary of PI who will supervise the technical delivery of the work, and by the access costs to their state-of the-art facilities including microbiology laboratories and advanced biofilm imaging facilities and analytics. This in-kind contribution was estimated at SGD 22,000, equivalent to ~ £12,000. NPL was acting as unfunded partner, committed to participating in meetings and providing advisory role in terms of reproducibility as well as contributing to the dissemination of project results (contribution estimated at £2000).
Impact Application of UUKi/UK SIN-SG bid to BEIS was unsuccessful.
Start Year 2021
 
Description Proposal to the UK-Singapore Universities Kickstarter Fund (UUKi/UK SIN-SG bid to BEIS) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Developed application for the UUKi/UK SIN-SG bid to BEIS in collaboration with the Singapore SNBC and the UK's National Physical Laboratory to kick start research and evaluate previous project results in biofilm standardisation. Grant value: £50000
Collaborator Contribution SCELSE committed to in-kind contributions to the salary of PI who will supervise the technical delivery of the work, and by the access costs to their state-of the-art facilities including microbiology laboratories and advanced biofilm imaging facilities and analytics. This in-kind contribution was estimated at SGD 22,000, equivalent to ~ £12,000. NPL was acting as unfunded partner, committed to participating in meetings and providing advisory role in terms of reproducibility as well as contributing to the dissemination of project results (contribution estimated at £2000).
Impact Application of UUKi/UK SIN-SG bid to BEIS was unsuccessful.
Start Year 2021
 
Description Proposal to the UK-Singapore Universities Kickstarter Fund (UUKi/UK SIN-SG bid to BEIS) 
Organisation National Physical Laboratory
Country United Kingdom 
Sector Academic/University 
PI Contribution Developed application for the UUKi/UK SIN-SG bid to BEIS in collaboration with the Singapore SNBC and the UK's National Physical Laboratory to kick start research and evaluate previous project results in biofilm standardisation. Grant value: £50000
Collaborator Contribution SCELSE committed to in-kind contributions to the salary of PI who will supervise the technical delivery of the work, and by the access costs to their state-of the-art facilities including microbiology laboratories and advanced biofilm imaging facilities and analytics. This in-kind contribution was estimated at SGD 22,000, equivalent to ~ £12,000. NPL was acting as unfunded partner, committed to participating in meetings and providing advisory role in terms of reproducibility as well as contributing to the dissemination of project results (contribution estimated at £2000).
Impact Application of UUKi/UK SIN-SG bid to BEIS was unsuccessful.
Start Year 2021
 
Description Pump-prime 01 Targeted drug delivery for clearance of TB (Nick Evans) 
Organisation Defence Science & Technology Laboratory (DSTL)
Country United Kingdom 
Sector Public 
PI Contribution The application brings together a team at the University of Southampton (Nick Evans and Tracey Newman) and Dstl (Adam Taylor and Kim Wright) who already work together, with Joanna Bacon, Mark Sutton and Charlotte Hind (HSA) at HSA and Miraz Rahman KCL. In past research the current team (UoS and Dstl) have developed a technology to enable the high concentration, stable encapsulation of antibiotics in polymeric nanoparticles. This enables specific intracellular delivery of antibiotics and has been shown to be effective in clearing Burkholderia. (See https://pubs.acs.org/doi/10.1021/acsnano.1c05309). This raised the possibility that this method may be an effective method for delivery of antibiotics in other infectious diseases, particularly where antibiotic stability and delivery is challenging (for example, poorly soluble or toxic antibiotics). After discussions at the NBIC Microbial Impacts meeting, the applicants discussed the possibility of better targeting novel classes of antimicrobial molecules in tuberculosis. These molecules are under development by Dr Bacon's collaborator Miraz Rahman at KCL but their pharmokinetics, toxicity profile or granuloma penetrance may be improved by encapsulation. The applications wish to explore the possibility of better methods of delivery in TB using the applicants' knowledge and expertise by arranging a collaborative meeting to discuss over lapping interests and possible pilot experiments. This will involve a meeting including the main applicants and other parties with interest in drug delivery and TB between the four institutions involved.
Collaborator Contribution As outlined above.
Impact Since the meeting, one student has been recruited (dstl/UoS funding) to work at UoS (Rebecca Cheetham). We are using preliminary data to develop funding proposal to BBSRC and/or MRC. We have been successful in attracting a student to a Dstl/SoCoBio in 2022 cohort. We are exploring with KCL attendee Miraz Rahman encapsulation of poorly soluble antibiotics in polymersomes - this work yet to commence but prelim data will inform funding proposals. Attendee Liku Tezera, ECR has put in an anniversary fellowship and will interview w/c 4th July. This is based on conversations at the meeting. Attendee Kim Wright has had abstract accepted for 2022 https://www.escmid.org/ conference. Collaboration is ongoing.
Start Year 2021
 
Description Pump-prime 01 Targeted drug delivery for clearance of TB (Nick Evans) 
Organisation King's College London
Country United Kingdom 
Sector Academic/University 
PI Contribution The application brings together a team at the University of Southampton (Nick Evans and Tracey Newman) and Dstl (Adam Taylor and Kim Wright) who already work together, with Joanna Bacon, Mark Sutton and Charlotte Hind (HSA) at HSA and Miraz Rahman KCL. In past research the current team (UoS and Dstl) have developed a technology to enable the high concentration, stable encapsulation of antibiotics in polymeric nanoparticles. This enables specific intracellular delivery of antibiotics and has been shown to be effective in clearing Burkholderia. (See https://pubs.acs.org/doi/10.1021/acsnano.1c05309). This raised the possibility that this method may be an effective method for delivery of antibiotics in other infectious diseases, particularly where antibiotic stability and delivery is challenging (for example, poorly soluble or toxic antibiotics). After discussions at the NBIC Microbial Impacts meeting, the applicants discussed the possibility of better targeting novel classes of antimicrobial molecules in tuberculosis. These molecules are under development by Dr Bacon's collaborator Miraz Rahman at KCL but their pharmokinetics, toxicity profile or granuloma penetrance may be improved by encapsulation. The applications wish to explore the possibility of better methods of delivery in TB using the applicants' knowledge and expertise by arranging a collaborative meeting to discuss over lapping interests and possible pilot experiments. This will involve a meeting including the main applicants and other parties with interest in drug delivery and TB between the four institutions involved.
Collaborator Contribution As outlined above.
Impact Since the meeting, one student has been recruited (dstl/UoS funding) to work at UoS (Rebecca Cheetham). We are using preliminary data to develop funding proposal to BBSRC and/or MRC. We have been successful in attracting a student to a Dstl/SoCoBio in 2022 cohort. We are exploring with KCL attendee Miraz Rahman encapsulation of poorly soluble antibiotics in polymersomes - this work yet to commence but prelim data will inform funding proposals. Attendee Liku Tezera, ECR has put in an anniversary fellowship and will interview w/c 4th July. This is based on conversations at the meeting. Attendee Kim Wright has had abstract accepted for 2022 https://www.escmid.org/ conference. Collaboration is ongoing.
Start Year 2021
 
Description Pump-prime 01 Targeted drug delivery for clearance of TB (Nick Evans) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The application brings together a team at the University of Southampton (Nick Evans and Tracey Newman) and Dstl (Adam Taylor and Kim Wright) who already work together, with Joanna Bacon, Mark Sutton and Charlotte Hind (HSA) at HSA and Miraz Rahman KCL. In past research the current team (UoS and Dstl) have developed a technology to enable the high concentration, stable encapsulation of antibiotics in polymeric nanoparticles. This enables specific intracellular delivery of antibiotics and has been shown to be effective in clearing Burkholderia. (See https://pubs.acs.org/doi/10.1021/acsnano.1c05309). This raised the possibility that this method may be an effective method for delivery of antibiotics in other infectious diseases, particularly where antibiotic stability and delivery is challenging (for example, poorly soluble or toxic antibiotics). After discussions at the NBIC Microbial Impacts meeting, the applicants discussed the possibility of better targeting novel classes of antimicrobial molecules in tuberculosis. These molecules are under development by Dr Bacon's collaborator Miraz Rahman at KCL but their pharmokinetics, toxicity profile or granuloma penetrance may be improved by encapsulation. The applications wish to explore the possibility of better methods of delivery in TB using the applicants' knowledge and expertise by arranging a collaborative meeting to discuss over lapping interests and possible pilot experiments. This will involve a meeting including the main applicants and other parties with interest in drug delivery and TB between the four institutions involved.
Collaborator Contribution As outlined above.
Impact Since the meeting, one student has been recruited (dstl/UoS funding) to work at UoS (Rebecca Cheetham). We are using preliminary data to develop funding proposal to BBSRC and/or MRC. We have been successful in attracting a student to a Dstl/SoCoBio in 2022 cohort. We are exploring with KCL attendee Miraz Rahman encapsulation of poorly soluble antibiotics in polymersomes - this work yet to commence but prelim data will inform funding proposals. Attendee Liku Tezera, ECR has put in an anniversary fellowship and will interview w/c 4th July. This is based on conversations at the meeting. Attendee Kim Wright has had abstract accepted for 2022 https://www.escmid.org/ conference. Collaboration is ongoing.
Start Year 2021
 
Description Pump-prime 01 Targeted drug delivery for clearance of TB (Nick Evans) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution The application brings together a team at the University of Southampton (Nick Evans and Tracey Newman) and Dstl (Adam Taylor and Kim Wright) who already work together, with Joanna Bacon, Mark Sutton and Charlotte Hind (HSA) at HSA and Miraz Rahman KCL. In past research the current team (UoS and Dstl) have developed a technology to enable the high concentration, stable encapsulation of antibiotics in polymeric nanoparticles. This enables specific intracellular delivery of antibiotics and has been shown to be effective in clearing Burkholderia. (See https://pubs.acs.org/doi/10.1021/acsnano.1c05309). This raised the possibility that this method may be an effective method for delivery of antibiotics in other infectious diseases, particularly where antibiotic stability and delivery is challenging (for example, poorly soluble or toxic antibiotics). After discussions at the NBIC Microbial Impacts meeting, the applicants discussed the possibility of better targeting novel classes of antimicrobial molecules in tuberculosis. These molecules are under development by Dr Bacon's collaborator Miraz Rahman at KCL but their pharmokinetics, toxicity profile or granuloma penetrance may be improved by encapsulation. The applications wish to explore the possibility of better methods of delivery in TB using the applicants' knowledge and expertise by arranging a collaborative meeting to discuss over lapping interests and possible pilot experiments. This will involve a meeting including the main applicants and other parties with interest in drug delivery and TB between the four institutions involved.
Collaborator Contribution As outlined above.
Impact Since the meeting, one student has been recruited (dstl/UoS funding) to work at UoS (Rebecca Cheetham). We are using preliminary data to develop funding proposal to BBSRC and/or MRC. We have been successful in attracting a student to a Dstl/SoCoBio in 2022 cohort. We are exploring with KCL attendee Miraz Rahman encapsulation of poorly soluble antibiotics in polymersomes - this work yet to commence but prelim data will inform funding proposals. Attendee Liku Tezera, ECR has put in an anniversary fellowship and will interview w/c 4th July. This is based on conversations at the meeting. Attendee Kim Wright has had abstract accepted for 2022 https://www.escmid.org/ conference. Collaboration is ongoing.
Start Year 2021
 
Description Pump-prime 03 TB Workshop: New Tools and Innovation; A reunion of UK Colleagues from the Newton Bhabha Researcher Links TB Challenges workshop in IISER Pune 2019 (Sumeet Mahajan) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Tuberculosis (TB) is the leading cause of death in infectious diseases and within the top 10 causes of death worldwide. In 2019, Dr Bacon won British Council funds, conceptualised, and organised, a highly successful Newton Bhabha Researcher Links India-UK TB Challenges workshop in IISER Pune, with delegates from UK and Indian Scientific communities. Prof Mahajan attended and made a substantial contribution to the workshop. The three themes of the workshop were Theme 1 "TB control and complicating factors", Theme 2 "Fundamental biology", and Theme 3 "New tools and innovation" There was great synergy, enthusiasm, and opportunities for collaborative projects. A follow-up workshop had been planned by Dr Bacon, and on several occasions, members of the UK delegation attempted to get together. These attempts were unsuccessful due to the restrictions of Covid-19 pandemic and the commitments of many partners to the COVID response. We propose to hold a workshop to continue to build on the foundations of Theme 3 "new tools and innovation to tackle TB, whilst considering the knowledge gained around the TB challenges that need to be addressed, in India. Interdisciplinary scientists including engineers, chemists, biologists, and clinicians from Universities across the UK (Surrey, Southampton, Leicester, Birmingham, Nottingham, Kings College, and UCL) will meet again, and renew conversations for collaborative interdisciplinary TB projects.
Collaborator Contribution As outlined above.
Impact None yet.
Start Year 2021
 
Description Pump-prime 03 TB Workshop: New Tools and Innovation; A reunion of UK Colleagues from the Newton Bhabha Researcher Links TB Challenges workshop in IISER Pune 2019 (Sumeet Mahajan) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Tuberculosis (TB) is the leading cause of death in infectious diseases and within the top 10 causes of death worldwide. In 2019, Dr Bacon won British Council funds, conceptualised, and organised, a highly successful Newton Bhabha Researcher Links India-UK TB Challenges workshop in IISER Pune, with delegates from UK and Indian Scientific communities. Prof Mahajan attended and made a substantial contribution to the workshop. The three themes of the workshop were Theme 1 "TB control and complicating factors", Theme 2 "Fundamental biology", and Theme 3 "New tools and innovation" There was great synergy, enthusiasm, and opportunities for collaborative projects. A follow-up workshop had been planned by Dr Bacon, and on several occasions, members of the UK delegation attempted to get together. These attempts were unsuccessful due to the restrictions of Covid-19 pandemic and the commitments of many partners to the COVID response. We propose to hold a workshop to continue to build on the foundations of Theme 3 "new tools and innovation to tackle TB, whilst considering the knowledge gained around the TB challenges that need to be addressed, in India. Interdisciplinary scientists including engineers, chemists, biologists, and clinicians from Universities across the UK (Surrey, Southampton, Leicester, Birmingham, Nottingham, Kings College, and UCL) will meet again, and renew conversations for collaborative interdisciplinary TB projects.
Collaborator Contribution As outlined above.
Impact None yet.
Start Year 2021
 
Description Pump-prime 04 Quantifying microbiome degradation in rivers and surface runoff using infrared silicon photonics (James Wilkinson) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Current monitoring of water pollution is expensive, time-consuming and can provide limited spatial information on pollution levels. Infrared silicon photonics sensors could provide in situ measurements of the microbiome and pollutants in real time with high time resolution. Silicon photonics devices can be made at large volumes with low cost so devices could be placed cheaply at different locations along a body of water, providing the spatial resolution for pollution levels. The UoS researchers specialise in integrated photonic devices for infrared spectroscopy. UoP has modelling facilities for surface runoff into drainage ditches/rivers and expertise on the microbiome, pollutants and their role in different environments. Collaboration would progress the demonstration of an inexpensive and widely accessible pollution monitoring device.
Collaborator Contribution As outlined above.
Impact 2 ECRs (Dr Callum J Stirling and Dr David J Rowe) travelled to University of Portsmouth's Environmental Technology Field Station, to tour the facility and for discussions with Prof John Williams. The purpose of this meeting was to better understand the respective capabilities of each group and determine technological requirements of the sensors. Additionally, we identified a group of pollutants as sensing targets relevant for the water industry and are greatly toxic to the aquatic microbiome: PCB 77, fluoranthene and bis(tributyltin). The initial experiments have been designed and are planned to take place soon for proof-of-concept demonstrations and to determine the limit of detection. Next steps: Perform initial characterisation measurements of prospective analyte pollutants as a proof-of-concept demonstration and to determine limit of detection. From the results, design target spectral range for on-chip spectrometers. Test the fabricated devices in UoS and in situ at the UoP Environmental Technology Field Station.
Start Year 2021
 
Description Pump-prime 04 Quantifying microbiome degradation in rivers and surface runoff using infrared silicon photonics (James Wilkinson) 
Organisation University of Portsmouth
Country United Kingdom 
Sector Academic/University 
PI Contribution Current monitoring of water pollution is expensive, time-consuming and can provide limited spatial information on pollution levels. Infrared silicon photonics sensors could provide in situ measurements of the microbiome and pollutants in real time with high time resolution. Silicon photonics devices can be made at large volumes with low cost so devices could be placed cheaply at different locations along a body of water, providing the spatial resolution for pollution levels. The UoS researchers specialise in integrated photonic devices for infrared spectroscopy. UoP has modelling facilities for surface runoff into drainage ditches/rivers and expertise on the microbiome, pollutants and their role in different environments. Collaboration would progress the demonstration of an inexpensive and widely accessible pollution monitoring device.
Collaborator Contribution As outlined above.
Impact 2 ECRs (Dr Callum J Stirling and Dr David J Rowe) travelled to University of Portsmouth's Environmental Technology Field Station, to tour the facility and for discussions with Prof John Williams. The purpose of this meeting was to better understand the respective capabilities of each group and determine technological requirements of the sensors. Additionally, we identified a group of pollutants as sensing targets relevant for the water industry and are greatly toxic to the aquatic microbiome: PCB 77, fluoranthene and bis(tributyltin). The initial experiments have been designed and are planned to take place soon for proof-of-concept demonstrations and to determine the limit of detection. Next steps: Perform initial characterisation measurements of prospective analyte pollutants as a proof-of-concept demonstration and to determine limit of detection. From the results, design target spectral range for on-chip spectrometers. Test the fabricated devices in UoS and in situ at the UoP Environmental Technology Field Station.
Start Year 2021
 
Description Pump-prime 04 Quantifying microbiome degradation in rivers and surface runoff using infrared silicon photonics (James Wilkinson) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Current monitoring of water pollution is expensive, time-consuming and can provide limited spatial information on pollution levels. Infrared silicon photonics sensors could provide in situ measurements of the microbiome and pollutants in real time with high time resolution. Silicon photonics devices can be made at large volumes with low cost so devices could be placed cheaply at different locations along a body of water, providing the spatial resolution for pollution levels. The UoS researchers specialise in integrated photonic devices for infrared spectroscopy. UoP has modelling facilities for surface runoff into drainage ditches/rivers and expertise on the microbiome, pollutants and their role in different environments. Collaboration would progress the demonstration of an inexpensive and widely accessible pollution monitoring device.
Collaborator Contribution As outlined above.
Impact 2 ECRs (Dr Callum J Stirling and Dr David J Rowe) travelled to University of Portsmouth's Environmental Technology Field Station, to tour the facility and for discussions with Prof John Williams. The purpose of this meeting was to better understand the respective capabilities of each group and determine technological requirements of the sensors. Additionally, we identified a group of pollutants as sensing targets relevant for the water industry and are greatly toxic to the aquatic microbiome: PCB 77, fluoranthene and bis(tributyltin). The initial experiments have been designed and are planned to take place soon for proof-of-concept demonstrations and to determine the limit of detection. Next steps: Perform initial characterisation measurements of prospective analyte pollutants as a proof-of-concept demonstration and to determine limit of detection. From the results, design target spectral range for on-chip spectrometers. Test the fabricated devices in UoS and in situ at the UoP Environmental Technology Field Station.
Start Year 2021
 
Description Pump-prime 05 Developing Mid-infrared absorption spectroscopy as a method for identifying phages for research and diagnostic purposes. (Saul Faust) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Our collaboration aims to characterise phages using Mid-infrared absorption spectroscopy (MAS). We will measure the spectroscopic fingerprint of a variety of phages to determine whether MAS can be used to differentiate DNA and RNA phages and to identify absorption peaks that relate to different phages. We envisage that the data generated will help inform further investigation of the following: 1. MAS as a label-free method for characterising the microbiome for research purposes. 2. The use of MAS as a diagnostic tool for identifying viral infections.
Collaborator Contribution As outlined above.
Impact Traditional phage characterisation methods are time-consuming and laborious; here we used mid-infrared (MIR) spectroscopy to test 56 newly isolated, and previously uncharacterised Klebsiella pneumoniae phages, as well as 12 characterised and known phages. Measurements were performed on the individual phages suspended in media and classified using Principle Component Analysis. We were able to identify the distinct types of phages with no additional sample preparation using MIR spectroscopy. Klebsiella pneumoniae is one of the five most critical antimicrobial resistant species - the "ESKAPE" pathogens - with carbapenem-resistant K. pneumoniae (CRKP) being on the priority list for the development of new antimicrobials (PMID 23458769, PMID 29276051). Previous work by our collaborators identified 56 new K. pneumoniae phages and characterised them using traditional methods to assess the potential of these phages in phage therapy, which has the potential to aid antibiotics in clearing bacterial infections (PMID 34512166). We have previously shown that MIR spectroscopy can identify antibiotics and quantify their concentrations directly in whole blood. Therefore, classifying both at once would enable antimicrobial performance to be assessed in real time: ideally this would show a drop in antibiotic levels followed by a drop in phage levels. This is impossible with other techniques, making MIR technology an ideal tool for research (by comparing efficacy of potential treatments) and therapeutic medicine (for assessing patient response). Next steps: - Pending the outcomes of our planned next experiments, decide between the following sources for a grant application: EPSRC IAA; MRC Developmental Pathway Funding Scheme; NIHR Invention for Innovation. - One ECR (Dr David J Rowe) applied for a three year UoS Anniversary Fellowship, which included developing this research as one of three work packages. - Discuss study design with statistician in UoS Maths (Antony Overstall). - Obtain a greater variety of phages and characterise with MIR spectroscopy to build model for machine learning classification. - Involvement of laboratory technicians at NIHR CRF so that more phages can be analysed over the coming year.
Start Year 2021
 
Description Pump-prime 05 Developing Mid-infrared absorption spectroscopy as a method for identifying phages for research and diagnostic purposes. (Saul Faust) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Our collaboration aims to characterise phages using Mid-infrared absorption spectroscopy (MAS). We will measure the spectroscopic fingerprint of a variety of phages to determine whether MAS can be used to differentiate DNA and RNA phages and to identify absorption peaks that relate to different phages. We envisage that the data generated will help inform further investigation of the following: 1. MAS as a label-free method for characterising the microbiome for research purposes. 2. The use of MAS as a diagnostic tool for identifying viral infections.
Collaborator Contribution As outlined above.
Impact Traditional phage characterisation methods are time-consuming and laborious; here we used mid-infrared (MIR) spectroscopy to test 56 newly isolated, and previously uncharacterised Klebsiella pneumoniae phages, as well as 12 characterised and known phages. Measurements were performed on the individual phages suspended in media and classified using Principle Component Analysis. We were able to identify the distinct types of phages with no additional sample preparation using MIR spectroscopy. Klebsiella pneumoniae is one of the five most critical antimicrobial resistant species - the "ESKAPE" pathogens - with carbapenem-resistant K. pneumoniae (CRKP) being on the priority list for the development of new antimicrobials (PMID 23458769, PMID 29276051). Previous work by our collaborators identified 56 new K. pneumoniae phages and characterised them using traditional methods to assess the potential of these phages in phage therapy, which has the potential to aid antibiotics in clearing bacterial infections (PMID 34512166). We have previously shown that MIR spectroscopy can identify antibiotics and quantify their concentrations directly in whole blood. Therefore, classifying both at once would enable antimicrobial performance to be assessed in real time: ideally this would show a drop in antibiotic levels followed by a drop in phage levels. This is impossible with other techniques, making MIR technology an ideal tool for research (by comparing efficacy of potential treatments) and therapeutic medicine (for assessing patient response). Next steps: - Pending the outcomes of our planned next experiments, decide between the following sources for a grant application: EPSRC IAA; MRC Developmental Pathway Funding Scheme; NIHR Invention for Innovation. - One ECR (Dr David J Rowe) applied for a three year UoS Anniversary Fellowship, which included developing this research as one of three work packages. - Discuss study design with statistician in UoS Maths (Antony Overstall). - Obtain a greater variety of phages and characterise with MIR spectroscopy to build model for machine learning classification. - Involvement of laboratory technicians at NIHR CRF so that more phages can be analysed over the coming year.
Start Year 2021
 
Description Pump-prime 06 Developing a fluorescence biosensor based on a curcumin binding protein (Ivo Tews) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The two applicants met for the first time at the Biofilms Impact meeting 2021 at Southampton. We propose to explore the binding of curcumin to the Escherichia coli curcumin reductase, CurA. While the natural fluorescence is to be harvested for biosensor development, a structural biology aspect is required for understanding the mechanism of fluorescence. This then leads into targeted design of an optimal fluorescent binder and represents a novel opportunity in bio-engineering. Moore regularly obtains high yields of curcumin reductase from E. coli (>20 mg/L) and has recently demonstrated that the weak quantum yield of curcumin in aqueous solvents (? = 0.01) is 20-fold enhanced when bound to the enzyme (doi: 10.1101/2021.09.22.461347). Tews has over 25 years experience in protein crystallography and will contribute access to the protein-to-structure capability at the Institute for Life Sciences. Curcumin reductase structures are known (Fig 1), however not in curcumin bound state. We are able to generate stable curcumin complexes of the NADP deplete E. coli enzyme, suited for structure determination.
Collaborator Contribution We have met in Kent 24.2.2022; present were Simon Moore, Anastasios Tsaousis, both Kent, and Chris Holes, Ivo Tews, both Southampton. We discussed the potential collaboration and availability of instrumentation and both laboratories, and how work would be split between the two sites. We decided that cloning and biological assays were to be carried out in Kent, Protein purification can be carried out in both places, crystallisation and structural biology would be carried out in Southampton, and anaerobic work would be set up in Kent, with Southampton advising. We inspected initial protein crystallisation trials done at Kent and took samples back to Southampton for further analysis. At Southampton, we used the UV microscope to demonstrate the crystals were protein (not salt), froze crystals, and analysed them at the European Synchrotron Radiation Facility 3+4.3.2022.
Impact Feedback from academic: The funds were spent on travel (£140) and for crystallisation consumables. The experiments created preliminary data that were included in a grant application to the BBSRC (deadline 27.4.2022). Next steps: Further grant proposal in preparation for autumn, however this requires further pump prime funding and hands-on experiments to generate the required preliminary data.
Start Year 2021
 
Description Pump-prime 06 Developing a fluorescence biosensor based on a curcumin binding protein (Ivo Tews) 
Organisation University of Kent
Country United Kingdom 
Sector Academic/University 
PI Contribution The two applicants met for the first time at the Biofilms Impact meeting 2021 at Southampton. We propose to explore the binding of curcumin to the Escherichia coli curcumin reductase, CurA. While the natural fluorescence is to be harvested for biosensor development, a structural biology aspect is required for understanding the mechanism of fluorescence. This then leads into targeted design of an optimal fluorescent binder and represents a novel opportunity in bio-engineering. Moore regularly obtains high yields of curcumin reductase from E. coli (>20 mg/L) and has recently demonstrated that the weak quantum yield of curcumin in aqueous solvents (? = 0.01) is 20-fold enhanced when bound to the enzyme (doi: 10.1101/2021.09.22.461347). Tews has over 25 years experience in protein crystallography and will contribute access to the protein-to-structure capability at the Institute for Life Sciences. Curcumin reductase structures are known (Fig 1), however not in curcumin bound state. We are able to generate stable curcumin complexes of the NADP deplete E. coli enzyme, suited for structure determination.
Collaborator Contribution We have met in Kent 24.2.2022; present were Simon Moore, Anastasios Tsaousis, both Kent, and Chris Holes, Ivo Tews, both Southampton. We discussed the potential collaboration and availability of instrumentation and both laboratories, and how work would be split between the two sites. We decided that cloning and biological assays were to be carried out in Kent, Protein purification can be carried out in both places, crystallisation and structural biology would be carried out in Southampton, and anaerobic work would be set up in Kent, with Southampton advising. We inspected initial protein crystallisation trials done at Kent and took samples back to Southampton for further analysis. At Southampton, we used the UV microscope to demonstrate the crystals were protein (not salt), froze crystals, and analysed them at the European Synchrotron Radiation Facility 3+4.3.2022.
Impact Feedback from academic: The funds were spent on travel (£140) and for crystallisation consumables. The experiments created preliminary data that were included in a grant application to the BBSRC (deadline 27.4.2022). Next steps: Further grant proposal in preparation for autumn, however this requires further pump prime funding and hands-on experiments to generate the required preliminary data.
Start Year 2021
 
Description Pump-prime 06 Developing a fluorescence biosensor based on a curcumin binding protein (Ivo Tews) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution The two applicants met for the first time at the Biofilms Impact meeting 2021 at Southampton. We propose to explore the binding of curcumin to the Escherichia coli curcumin reductase, CurA. While the natural fluorescence is to be harvested for biosensor development, a structural biology aspect is required for understanding the mechanism of fluorescence. This then leads into targeted design of an optimal fluorescent binder and represents a novel opportunity in bio-engineering. Moore regularly obtains high yields of curcumin reductase from E. coli (>20 mg/L) and has recently demonstrated that the weak quantum yield of curcumin in aqueous solvents (? = 0.01) is 20-fold enhanced when bound to the enzyme (doi: 10.1101/2021.09.22.461347). Tews has over 25 years experience in protein crystallography and will contribute access to the protein-to-structure capability at the Institute for Life Sciences. Curcumin reductase structures are known (Fig 1), however not in curcumin bound state. We are able to generate stable curcumin complexes of the NADP deplete E. coli enzyme, suited for structure determination.
Collaborator Contribution We have met in Kent 24.2.2022; present were Simon Moore, Anastasios Tsaousis, both Kent, and Chris Holes, Ivo Tews, both Southampton. We discussed the potential collaboration and availability of instrumentation and both laboratories, and how work would be split between the two sites. We decided that cloning and biological assays were to be carried out in Kent, Protein purification can be carried out in both places, crystallisation and structural biology would be carried out in Southampton, and anaerobic work would be set up in Kent, with Southampton advising. We inspected initial protein crystallisation trials done at Kent and took samples back to Southampton for further analysis. At Southampton, we used the UV microscope to demonstrate the crystals were protein (not salt), froze crystals, and analysed them at the European Synchrotron Radiation Facility 3+4.3.2022.
Impact Feedback from academic: The funds were spent on travel (£140) and for crystallisation consumables. The experiments created preliminary data that were included in a grant application to the BBSRC (deadline 27.4.2022). Next steps: Further grant proposal in preparation for autumn, however this requires further pump prime funding and hands-on experiments to generate the required preliminary data.
Start Year 2021
 
Description Pump-prime 07 Microbial, metabolomic and metagenomic factors implicated in diseases of the female reproductive tract (Ying Cheong) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution [1] Research meeting(s) to finalise planned collaborative research projects: - Develop and optimise a pipeline for clinical sample collection across the patient journey to characterise the microbiomic and metabolomic signatures of the reproductive tract - Investigate the relationship between the reproductive tract metagenome and metabolome in tubal ectopic pregnancy - Determine the influence of the reproductive tract metagenome and metabolome on gynaecological pathologies [2] Time spent on writing research grant proposals together.
Collaborator Contribution As outlined above.
Impact The NBIC funds were spent on a research dinner where the background of the study was presented and potential routes of research/ analysis and funding were discussed. This gathering allowed the potential collaborators for the project to meet each other in the same room at the same time in a pleasant environment which facilitated open and creative discussions and strengthened relationships. Next steps: - Consolidating of analysis plans - Writing of SOPs for sample collection and analysis - Applying together for funding grants - including Wellbeing of Women and NIHR grants. These may be preceded by smaller seed grants.
Start Year 2021
 
Description Pump-prime 07 Microbial, metabolomic and metagenomic factors implicated in diseases of the female reproductive tract (Ying Cheong) 
Organisation University Hospital Southampton NHS Foundation Trust
Country United Kingdom 
Sector Hospitals 
PI Contribution [1] Research meeting(s) to finalise planned collaborative research projects: - Develop and optimise a pipeline for clinical sample collection across the patient journey to characterise the microbiomic and metabolomic signatures of the reproductive tract - Investigate the relationship between the reproductive tract metagenome and metabolome in tubal ectopic pregnancy - Determine the influence of the reproductive tract metagenome and metabolome on gynaecological pathologies [2] Time spent on writing research grant proposals together.
Collaborator Contribution As outlined above.
Impact The NBIC funds were spent on a research dinner where the background of the study was presented and potential routes of research/ analysis and funding were discussed. This gathering allowed the potential collaborators for the project to meet each other in the same room at the same time in a pleasant environment which facilitated open and creative discussions and strengthened relationships. Next steps: - Consolidating of analysis plans - Writing of SOPs for sample collection and analysis - Applying together for funding grants - including Wellbeing of Women and NIHR grants. These may be preceded by smaller seed grants.
Start Year 2021
 
Description Pump-prime 07 Microbial, metabolomic and metagenomic factors implicated in diseases of the female reproductive tract (Ying Cheong) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution [1] Research meeting(s) to finalise planned collaborative research projects: - Develop and optimise a pipeline for clinical sample collection across the patient journey to characterise the microbiomic and metabolomic signatures of the reproductive tract - Investigate the relationship between the reproductive tract metagenome and metabolome in tubal ectopic pregnancy - Determine the influence of the reproductive tract metagenome and metabolome on gynaecological pathologies [2] Time spent on writing research grant proposals together.
Collaborator Contribution As outlined above.
Impact The NBIC funds were spent on a research dinner where the background of the study was presented and potential routes of research/ analysis and funding were discussed. This gathering allowed the potential collaborators for the project to meet each other in the same room at the same time in a pleasant environment which facilitated open and creative discussions and strengthened relationships. Next steps: - Consolidating of analysis plans - Writing of SOPs for sample collection and analysis - Applying together for funding grants - including Wellbeing of Women and NIHR grants. These may be preceded by smaller seed grants.
Start Year 2021
 
Description Pump-prime 08 Non-invasive tools for monitoring microbiome dynamics and diagnosing skin conditions (Michael Ardern-Jones) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution Skin microbiome and its effect on various skin conditions and diseases is now well established. However, increased understanding of the dynamics in response to environmental exposure, use of personal healthcare products as well as treatments is still required. Moreover, tools which can be deployed in clinical settings for non-invasive interrogation of the skin and associated microbiome both for research as well as diagnoses are lacking. There is immense appetite for putting together a consortium of interested colleagues with diverse expertise and to collate our collective skills towards solving unmet needs related to skin through new technological tools. Katerina Steventon at NBIC has been particularly been instrumental in helping with these activities and an initial meeting was organised earlier this year. Through this funding request we want bring together a focussed group of clinicians, experimentalists and technology developers and potentially some identified industrial partners to brainstorm and discuss ways to take things forward and where possible, acquire pilot data. We will work with Katerina as well as reach out to colleagues within Southampton. We would like to organise a half-day workshop at a suitable venue (such as the Axis Centre or Avenue Campus) to brainstorm, discuss and develop ideas into project outlines.
Collaborator Contribution As outlined above.
Impact None yet.
Start Year 2021
 
Description Pump-prime 08 Non-invasive tools for monitoring microbiome dynamics and diagnosing skin conditions (Michael Ardern-Jones) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Skin microbiome and its effect on various skin conditions and diseases is now well established. However, increased understanding of the dynamics in response to environmental exposure, use of personal healthcare products as well as treatments is still required. Moreover, tools which can be deployed in clinical settings for non-invasive interrogation of the skin and associated microbiome both for research as well as diagnoses are lacking. There is immense appetite for putting together a consortium of interested colleagues with diverse expertise and to collate our collective skills towards solving unmet needs related to skin through new technological tools. Katerina Steventon at NBIC has been particularly been instrumental in helping with these activities and an initial meeting was organised earlier this year. Through this funding request we want bring together a focussed group of clinicians, experimentalists and technology developers and potentially some identified industrial partners to brainstorm and discuss ways to take things forward and where possible, acquire pilot data. We will work with Katerina as well as reach out to colleagues within Southampton. We would like to organise a half-day workshop at a suitable venue (such as the Axis Centre or Avenue Campus) to brainstorm, discuss and develop ideas into project outlines.
Collaborator Contribution As outlined above.
Impact None yet.
Start Year 2021
 
Description Research Collaboration with Cica Biomedical: Follow on funding (Holly Wilkinson) 
Organisation Cica Biomedical Ltd
Country United Kingdom 
Sector Private 
PI Contribution Ongoing development and application of biofilm-relevant wound models.
Collaborator Contribution Provision of industry insight into biofilm wound models and identification of additional partner opportunities.
Impact Follow-on funding. The collaboration is multi-disciplinary combining in vitro, ex vivo and in vivo biofilm wound models.
Start Year 2021
 
Description Research Collaboration with Cica Biomedical: Follow on funding (Holly Wilkinson) 
Organisation University of Hull
Country United Kingdom 
Sector Academic/University 
PI Contribution Ongoing development and application of biofilm-relevant wound models.
Collaborator Contribution Provision of industry insight into biofilm wound models and identification of additional partner opportunities.
Impact Follow-on funding. The collaboration is multi-disciplinary combining in vitro, ex vivo and in vivo biofilm wound models.
Start Year 2021
 
Description Research collaboration with Micreos Pharma 
Organisation Micreos
Department Micreos Human Health BV
Country Netherlands 
Sector Private 
PI Contribution Performing pre-clinical efficacy testing to inform future clinical trials.
Collaborator Contribution Study support and oversight, provision of test agents and collaboration has also led to follow-on funding from the National Biofilms Innovation Centre.
Impact Publications currently in preparation but no direct outputs yet. The collaboration is multidisciplinary and brings together wound healing expertise, biological models, microbiology, genomics and formulation expertise.
Start Year 2022
 
Description Research on biofilms outreach practices (JC Denis) 
Organisation Manchester Metropolitan University
Country United Kingdom 
Sector Academic/University 
PI Contribution Framing the research, helping with collecting and analysing results.
Collaborator Contribution Framing the research, helping with collecting and analysing results, writing the research.
Impact Publication in process.
Start Year 2020
 
Description Research on biofilms outreach practices (JC Denis) 
Organisation University of Dundee
Country United Kingdom 
Sector Academic/University 
PI Contribution Framing the research, helping with collecting and analysing results.
Collaborator Contribution Framing the research, helping with collecting and analysing results, writing the research.
Impact Publication in process.
Start Year 2020
 
Description Routes of infection, routes to safety: creative mapping of human-viral behaviours on the bus to understand infection prevention practices. (Emma Roe) 
Organisation Go South Coast Ltd
Department Bluestar Buses
Country United Kingdom 
Sector Private 
PI Contribution UKRI grant AH/V014986/1 http://www.biicl.org > documents > 10673_full_response_open
Collaborator Contribution There is an absence of qualitative, interdisciplinary research on the personal application of infection prevention (IP) measures, like hand-washing and mask-wearing, and its effectiveness beyond the healthcare setting. In this crisis, IP measures are critical to building confidence to resume leisure and economic activity out of the home. The project advances previous work by this team that identified a need for novel IP research which integrates behavioural, microbiological and aesthetic approaches to creatively demonstrate the interactions of human movement with microbial/viral transmission. The case study is the public transport bus and its diverse community of users, including BAME and other higher-risk groups. The research will: i) investigate the structural challenges in consistent application of IP in public (and private) spaces; ii) provide microbiological and sociological evidence to inform and improve effective cleaning practices for bus operators and safe travel practices for bus users; iii) generate wider public knowledge and understanding of infection risk/prevention and their geographies in shared indoor spaces. This project will build confidence by addressing unknowns about the potential viral threat of boarding the bus. The team will work quickly to undertake and integrate findings from an ethnographic research and a microbiome study to assess the effectiveness of bus cleaning routines and passenger PPE. A fluorescents mapping simulation using ultraviolet powders and sprays will mimic and demonstrate visually the mobility of 'mock' SARS-CoV-2 through contact and aerosols if IP measures are not implemented. Outputs include the creation of novel viral aesthetic materials to communicate the effectiveness of IP.
Impact None yet.
Start Year 2021
 
Description Routes of infection, routes to safety: creative mapping of human-viral behaviours on the bus to understand infection prevention practices. (Emma Roe) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution UKRI grant AH/V014986/1 http://www.biicl.org > documents > 10673_full_response_open
Collaborator Contribution There is an absence of qualitative, interdisciplinary research on the personal application of infection prevention (IP) measures, like hand-washing and mask-wearing, and its effectiveness beyond the healthcare setting. In this crisis, IP measures are critical to building confidence to resume leisure and economic activity out of the home. The project advances previous work by this team that identified a need for novel IP research which integrates behavioural, microbiological and aesthetic approaches to creatively demonstrate the interactions of human movement with microbial/viral transmission. The case study is the public transport bus and its diverse community of users, including BAME and other higher-risk groups. The research will: i) investigate the structural challenges in consistent application of IP in public (and private) spaces; ii) provide microbiological and sociological evidence to inform and improve effective cleaning practices for bus operators and safe travel practices for bus users; iii) generate wider public knowledge and understanding of infection risk/prevention and their geographies in shared indoor spaces. This project will build confidence by addressing unknowns about the potential viral threat of boarding the bus. The team will work quickly to undertake and integrate findings from an ethnographic research and a microbiome study to assess the effectiveness of bus cleaning routines and passenger PPE. A fluorescents mapping simulation using ultraviolet powders and sprays will mimic and demonstrate visually the mobility of 'mock' SARS-CoV-2 through contact and aerosols if IP measures are not implemented. Outputs include the creation of novel viral aesthetic materials to communicate the effectiveness of IP.
Impact None yet.
Start Year 2021
 
Description Routes of infection, routes to safety: creative mapping of human-viral behaviours on the bus to understand infection prevention practices. (Emma Roe) 
Organisation United Kingdom Research and Innovation
Country United Kingdom 
Sector Public 
PI Contribution UKRI grant AH/V014986/1 http://www.biicl.org > documents > 10673_full_response_open
Collaborator Contribution There is an absence of qualitative, interdisciplinary research on the personal application of infection prevention (IP) measures, like hand-washing and mask-wearing, and its effectiveness beyond the healthcare setting. In this crisis, IP measures are critical to building confidence to resume leisure and economic activity out of the home. The project advances previous work by this team that identified a need for novel IP research which integrates behavioural, microbiological and aesthetic approaches to creatively demonstrate the interactions of human movement with microbial/viral transmission. The case study is the public transport bus and its diverse community of users, including BAME and other higher-risk groups. The research will: i) investigate the structural challenges in consistent application of IP in public (and private) spaces; ii) provide microbiological and sociological evidence to inform and improve effective cleaning practices for bus operators and safe travel practices for bus users; iii) generate wider public knowledge and understanding of infection risk/prevention and their geographies in shared indoor spaces. This project will build confidence by addressing unknowns about the potential viral threat of boarding the bus. The team will work quickly to undertake and integrate findings from an ethnographic research and a microbiome study to assess the effectiveness of bus cleaning routines and passenger PPE. A fluorescents mapping simulation using ultraviolet powders and sprays will mimic and demonstrate visually the mobility of 'mock' SARS-CoV-2 through contact and aerosols if IP measures are not implemented. Outputs include the creation of novel viral aesthetic materials to communicate the effectiveness of IP.
Impact None yet.
Start Year 2021
 
Description Routes of infection, routes to safety: creative mapping of human-viral behaviours on the bus to understand infection prevention practices. (Emma Roe) 
Organisation University of Newcastle
Country Australia 
Sector Academic/University 
PI Contribution UKRI grant AH/V014986/1 http://www.biicl.org > documents > 10673_full_response_open
Collaborator Contribution There is an absence of qualitative, interdisciplinary research on the personal application of infection prevention (IP) measures, like hand-washing and mask-wearing, and its effectiveness beyond the healthcare setting. In this crisis, IP measures are critical to building confidence to resume leisure and economic activity out of the home. The project advances previous work by this team that identified a need for novel IP research which integrates behavioural, microbiological and aesthetic approaches to creatively demonstrate the interactions of human movement with microbial/viral transmission. The case study is the public transport bus and its diverse community of users, including BAME and other higher-risk groups. The research will: i) investigate the structural challenges in consistent application of IP in public (and private) spaces; ii) provide microbiological and sociological evidence to inform and improve effective cleaning practices for bus operators and safe travel practices for bus users; iii) generate wider public knowledge and understanding of infection risk/prevention and their geographies in shared indoor spaces. This project will build confidence by addressing unknowns about the potential viral threat of boarding the bus. The team will work quickly to undertake and integrate findings from an ethnographic research and a microbiome study to assess the effectiveness of bus cleaning routines and passenger PPE. A fluorescents mapping simulation using ultraviolet powders and sprays will mimic and demonstrate visually the mobility of 'mock' SARS-CoV-2 through contact and aerosols if IP measures are not implemented. Outputs include the creation of novel viral aesthetic materials to communicate the effectiveness of IP.
Impact None yet.
Start Year 2021
 
Description Routes of infection, routes to safety: creative mapping of human-viral behaviours on the bus to understand infection prevention practices. (Emma Roe) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution UKRI grant AH/V014986/1 http://www.biicl.org > documents > 10673_full_response_open
Collaborator Contribution There is an absence of qualitative, interdisciplinary research on the personal application of infection prevention (IP) measures, like hand-washing and mask-wearing, and its effectiveness beyond the healthcare setting. In this crisis, IP measures are critical to building confidence to resume leisure and economic activity out of the home. The project advances previous work by this team that identified a need for novel IP research which integrates behavioural, microbiological and aesthetic approaches to creatively demonstrate the interactions of human movement with microbial/viral transmission. The case study is the public transport bus and its diverse community of users, including BAME and other higher-risk groups. The research will: i) investigate the structural challenges in consistent application of IP in public (and private) spaces; ii) provide microbiological and sociological evidence to inform and improve effective cleaning practices for bus operators and safe travel practices for bus users; iii) generate wider public knowledge and understanding of infection risk/prevention and their geographies in shared indoor spaces. This project will build confidence by addressing unknowns about the potential viral threat of boarding the bus. The team will work quickly to undertake and integrate findings from an ethnographic research and a microbiome study to assess the effectiveness of bus cleaning routines and passenger PPE. A fluorescents mapping simulation using ultraviolet powders and sprays will mimic and demonstrate visually the mobility of 'mock' SARS-CoV-2 through contact and aerosols if IP measures are not implemented. Outputs include the creation of novel viral aesthetic materials to communicate the effectiveness of IP.
Impact None yet.
Start Year 2021
 
Description Routes of infection, routes to safety: creative mapping of human-viral behaviours on the bus to understand infection prevention practices. (Emma Roe) 
Organisation YouSeq Ltd
Country United Kingdom 
Sector Private 
PI Contribution UKRI grant AH/V014986/1 http://www.biicl.org > documents > 10673_full_response_open
Collaborator Contribution There is an absence of qualitative, interdisciplinary research on the personal application of infection prevention (IP) measures, like hand-washing and mask-wearing, and its effectiveness beyond the healthcare setting. In this crisis, IP measures are critical to building confidence to resume leisure and economic activity out of the home. The project advances previous work by this team that identified a need for novel IP research which integrates behavioural, microbiological and aesthetic approaches to creatively demonstrate the interactions of human movement with microbial/viral transmission. The case study is the public transport bus and its diverse community of users, including BAME and other higher-risk groups. The research will: i) investigate the structural challenges in consistent application of IP in public (and private) spaces; ii) provide microbiological and sociological evidence to inform and improve effective cleaning practices for bus operators and safe travel practices for bus users; iii) generate wider public knowledge and understanding of infection risk/prevention and their geographies in shared indoor spaces. This project will build confidence by addressing unknowns about the potential viral threat of boarding the bus. The team will work quickly to undertake and integrate findings from an ethnographic research and a microbiome study to assess the effectiveness of bus cleaning routines and passenger PPE. A fluorescents mapping simulation using ultraviolet powders and sprays will mimic and demonstrate visually the mobility of 'mock' SARS-CoV-2 through contact and aerosols if IP measures are not implemented. Outputs include the creation of novel viral aesthetic materials to communicate the effectiveness of IP.
Impact None yet.
Start Year 2021
 
Description Singapore: Building a globally leading partnership between the National Biofilms Innovation Centre and SCELSE (Jeremy Webb) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution This proposal will advance development of the major strategic collaborative funding initiatives between the UK's National Biofilms Innovation Centre (NBIC), and the Singapore Centre for Environmental Life Sciences Engineering (SCELSE), aresearch Centre of Excellence based at Nanyang Technological University, Singapore. The shared vision of NBIC and SCELSE is to build a globally leading UK-Singapore partnership in biofilm research.Specifically, this Global Partnering Award will facilitate:- Placements and Internships (~five); to build collaborative and supervisory relationships in advance of the commencement of our joint PhD program.- Targeted visits to develop major strategic collaborative funding initiatives; we anticipate five early career researcher exchanges between NBIC and SCELSE. These exchanges will also provide shared, collaborative access to facilities established at SCELSE, NTU and NUS and across the UK NBIC consortium.
Collaborator Contribution BBSRC funding reference BB/T020121/1. NBIC is included in the BBSRC's delivery plan as a key component of their Research and Innovation priorities, in order to 'connect researchers across the UK and catalyse collaboration with industry in the study of biofilms to achieve breakthrough innovations'2. This award will be essential to drive and maximise a global partnership between SCELSE and NBIC. Biofilms are central to some of the most urgent global challenges and exert considerable economic impact across industry sectors. By bringing together the complementary strengths and expertise of NBIC and SCELSE we will amplify efforts across both centres to address core scientific global biofilm challenges to the mutual benefit of both nations and globally. The NBIC-SCELSE partnership will further foster synergistic interactions between the SNBC and NBIC's wider UK industry partnership and government agencies. SCELSE will support these endeavours through salary and stipends to early career research staff and students respectively. SCELSE will also host students and researchers from the UK universities covering their accommodation and providing supervision by SCELSE faculty in addition to the access to high-end facilities. Taken together, we anticipate that this cash and in-kind contribution of our faculty, staff and students for interaction with NBIC can be valued at approximately SG$ ~500K over 3 years. NBIC is unable to fund this activity from current funding because its investment and remit is focused on promoting academic-industry partnerships, innovation and translational activity within the UK. In contrast, the proposed partnership will require the international exchange of leading academic expertise and early career researchers to establish a joint research program and strategies for fundamental research in pursuit of our goals. The funding will allow us to generate evidence of the research synergies identified above, exchange knowledge and capabilities between Singapore and the UK and lead to us making applications for further collaborative funding through our respective funding bodies and other routes.
Impact None yet.
Start Year 2022
 
Description Singapore: Building a globally leading partnership between the National Biofilms Innovation Centre and SCELSE (Jeremy Webb) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This proposal will advance development of the major strategic collaborative funding initiatives between the UK's National Biofilms Innovation Centre (NBIC), and the Singapore Centre for Environmental Life Sciences Engineering (SCELSE), aresearch Centre of Excellence based at Nanyang Technological University, Singapore. The shared vision of NBIC and SCELSE is to build a globally leading UK-Singapore partnership in biofilm research.Specifically, this Global Partnering Award will facilitate:- Placements and Internships (~five); to build collaborative and supervisory relationships in advance of the commencement of our joint PhD program.- Targeted visits to develop major strategic collaborative funding initiatives; we anticipate five early career researcher exchanges between NBIC and SCELSE. These exchanges will also provide shared, collaborative access to facilities established at SCELSE, NTU and NUS and across the UK NBIC consortium.
Collaborator Contribution BBSRC funding reference BB/T020121/1. NBIC is included in the BBSRC's delivery plan as a key component of their Research and Innovation priorities, in order to 'connect researchers across the UK and catalyse collaboration with industry in the study of biofilms to achieve breakthrough innovations'2. This award will be essential to drive and maximise a global partnership between SCELSE and NBIC. Biofilms are central to some of the most urgent global challenges and exert considerable economic impact across industry sectors. By bringing together the complementary strengths and expertise of NBIC and SCELSE we will amplify efforts across both centres to address core scientific global biofilm challenges to the mutual benefit of both nations and globally. The NBIC-SCELSE partnership will further foster synergistic interactions between the SNBC and NBIC's wider UK industry partnership and government agencies. SCELSE will support these endeavours through salary and stipends to early career research staff and students respectively. SCELSE will also host students and researchers from the UK universities covering their accommodation and providing supervision by SCELSE faculty in addition to the access to high-end facilities. Taken together, we anticipate that this cash and in-kind contribution of our faculty, staff and students for interaction with NBIC can be valued at approximately SG$ ~500K over 3 years. NBIC is unable to fund this activity from current funding because its investment and remit is focused on promoting academic-industry partnerships, innovation and translational activity within the UK. In contrast, the proposed partnership will require the international exchange of leading academic expertise and early career researchers to establish a joint research program and strategies for fundamental research in pursuit of our goals. The funding will allow us to generate evidence of the research synergies identified above, exchange knowledge and capabilities between Singapore and the UK and lead to us making applications for further collaborative funding through our respective funding bodies and other routes.
Impact None yet.
Start Year 2022
 
Description Singapore: Building a globally leading partnership between the National Biofilms Innovation Centre and SCELSE (Jeremy Webb) 
Organisation Singapore Centre for Environmental Life Sciences Engineering
Country Singapore 
Sector Public 
PI Contribution This proposal will advance development of the major strategic collaborative funding initiatives between the UK's National Biofilms Innovation Centre (NBIC), and the Singapore Centre for Environmental Life Sciences Engineering (SCELSE), aresearch Centre of Excellence based at Nanyang Technological University, Singapore. The shared vision of NBIC and SCELSE is to build a globally leading UK-Singapore partnership in biofilm research.Specifically, this Global Partnering Award will facilitate:- Placements and Internships (~five); to build collaborative and supervisory relationships in advance of the commencement of our joint PhD program.- Targeted visits to develop major strategic collaborative funding initiatives; we anticipate five early career researcher exchanges between NBIC and SCELSE. These exchanges will also provide shared, collaborative access to facilities established at SCELSE, NTU and NUS and across the UK NBIC consortium.
Collaborator Contribution BBSRC funding reference BB/T020121/1. NBIC is included in the BBSRC's delivery plan as a key component of their Research and Innovation priorities, in order to 'connect researchers across the UK and catalyse collaboration with industry in the study of biofilms to achieve breakthrough innovations'2. This award will be essential to drive and maximise a global partnership between SCELSE and NBIC. Biofilms are central to some of the most urgent global challenges and exert considerable economic impact across industry sectors. By bringing together the complementary strengths and expertise of NBIC and SCELSE we will amplify efforts across both centres to address core scientific global biofilm challenges to the mutual benefit of both nations and globally. The NBIC-SCELSE partnership will further foster synergistic interactions between the SNBC and NBIC's wider UK industry partnership and government agencies. SCELSE will support these endeavours through salary and stipends to early career research staff and students respectively. SCELSE will also host students and researchers from the UK universities covering their accommodation and providing supervision by SCELSE faculty in addition to the access to high-end facilities. Taken together, we anticipate that this cash and in-kind contribution of our faculty, staff and students for interaction with NBIC can be valued at approximately SG$ ~500K over 3 years. NBIC is unable to fund this activity from current funding because its investment and remit is focused on promoting academic-industry partnerships, innovation and translational activity within the UK. In contrast, the proposed partnership will require the international exchange of leading academic expertise and early career researchers to establish a joint research program and strategies for fundamental research in pursuit of our goals. The funding will allow us to generate evidence of the research synergies identified above, exchange knowledge and capabilities between Singapore and the UK and lead to us making applications for further collaborative funding through our respective funding bodies and other routes.
Impact None yet.
Start Year 2022
 
Description Smith and Nephew Consultancy 
Organisation Smith and Nephew
Department Smith and Nephew Wound Management
Country United Kingdom 
Sector Private 
PI Contribution Confidential
Collaborator Contribution Confidential
Impact This collaboration is multi-disciplinary: Microbiology Clinical research
Start Year 2018
 
Description Strength in Places Fund: Delivering Integrated Solutions for Human Infections (Rasmita Raval) 
Organisation United Kingdom Research and Innovation
Country United Kingdom 
Sector Public 
PI Contribution Developing anti-microbial technologies via knowledge-based design.
Collaborator Contribution Part of the £18M Strength in Places award to Liverpool City Region in 2020.
Impact Multi-disciplinary: Surface science, Chemistry, Imaging science, Microbiology, Clinical sciences.
Start Year 2020
 
Description Student placement from JianXi Normal University in China (Eileen Yu) 
Organisation Jiangxi Normal University
Country China 
Sector Academic/University 
PI Contribution PhD student from JianXi Normal University in China joining Loughborough University for a 6 month visit.
Collaborator Contribution Joint supervision.
Impact None yet.
Start Year 2021
 
Description Student placement from JianXi Normal University in China (Eileen Yu) 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution PhD student from JianXi Normal University in China joining Loughborough University for a 6 month visit.
Collaborator Contribution Joint supervision.
Impact None yet.
Start Year 2021
 
Description Studies in Solid Formulation Stability 
Organisation GlaxoSmithKline (GSK)
Country Global 
Sector Private 
PI Contribution Due to the work conducted during my EngD studies in combination with the success of this project (NBIC_FTMA_P_19_2_38), GSK and UCL signed an Exchange Knowledge Agreement and funded a 6 month study on the stability of solid formulations. The study was conducted by me under supervision of Ivan Parkin and employed a spectroscopic techniques (H- NMR, IR, UV/Vis) and scanning electron microscopy. This study can help the development of stronger formulations by giving insights on the increase of its reactive oxygen species output.
Collaborator Contribution Funding of study.
Impact None as yet.
Start Year 2022
 
Description Studying microbiological activity on foulant as a function of time and storage conditions (Maria Masoura) 
Organisation Procter & Gamble
Country United States 
Sector Private 
PI Contribution Training and supervision.
Collaborator Contribution Access to facilities, training and funding.
Impact Confidential.
Start Year 2020
 
Description Studying microbiological activity on foulant as a function of time and storage conditions (Maria Masoura) 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution Training and supervision.
Collaborator Contribution Access to facilities, training and funding.
Impact Confidential.
Start Year 2020
 
Description Targeted Proteins as a Novel Therapeutics against Multispecies Vaginal Biofilms (Ryan Kean) 
Organisation CC Biotech
Country United Kingdom 
Sector Private 
PI Contribution Full partners in this research project.
Collaborator Contribution Full partners in this research project.
Impact None yet.
Start Year 2021
 
Description Targeted Proteins as a Novel Therapeutics against Multispecies Vaginal Biofilms (Ryan Kean) 
Organisation Glasgow Caledonian University
Country United Kingdom 
Sector Academic/University 
PI Contribution Full partners in this research project.
Collaborator Contribution Full partners in this research project.
Impact None yet.
Start Year 2021
 
Description Targeted Proteins as a Novel Therapeutics against Multispecies Vaginal Biofilms (Ryan Kean) 
Organisation Scottish Universities Life Sciences Alliance
Country United Kingdom 
Sector Academic/University 
PI Contribution Full partners in this research project.
Collaborator Contribution Full partners in this research project.
Impact None yet.
Start Year 2021
 
Description Targeting pneumococcal carbohydrate metabolism to treat childhood infections (Raymond Allan) 
Organisation De Montfort University
Country United Kingdom 
Sector Academic/University 
PI Contribution Investigation of chemically-modified galactose analogues as novel treatments for Streptococcus pneumoniae biofilm-associated infections.
Collaborator Contribution Research grant.
Impact None yet.
Start Year 2018
 
Description Targeting pneumococcal carbohydrate metabolism to treat childhood infections (Raymond Allan) 
Organisation Rosetrees Trust
Country United Kingdom 
Sector Charity/Non Profit 
PI Contribution Investigation of chemically-modified galactose analogues as novel treatments for Streptococcus pneumoniae biofilm-associated infections.
Collaborator Contribution Research grant.
Impact None yet.
Start Year 2018
 
Description Targeting pneumococcal carbohydrate metabolism to treat childhood infections (Raymond Allan) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Investigation of chemically-modified galactose analogues as novel treatments for Streptococcus pneumoniae biofilm-associated infections.
Collaborator Contribution Research grant.
Impact None yet.
Start Year 2018
 
Description Tecrea/University College London, Nanocin/UTI collaboration (Isabelle Papandronicou) 
Organisation Tecrea Ltd
Country United Kingdom 
Sector Private 
PI Contribution Tecrea - Provided expertise and intellectual input regarding the Nanocin technology. Provided Nanocin for use in experiments. Provided staff member time for completion of grant.
Collaborator Contribution University College London - Provided expertise and intellectual input regarding current urinary tract research and study design. Provided access to laboratories and equipment (such as laser scanning confocal microscope) at University college London. Trained the Tecrea lab staff in laser scanning confocal microscopy and data analysis.
Impact Follow-on funding: accepted for new NBIC grant (currently underway) for continuing the research assessing Nanocin against UTI co-biofilms.
Start Year 2021
 
Description Tecrea/University College London, Nanocin/UTI collaboration (Isabelle Papandronicou) 
Organisation University College London
Country United Kingdom 
Sector Academic/University 
PI Contribution Tecrea - Provided expertise and intellectual input regarding the Nanocin technology. Provided Nanocin for use in experiments. Provided staff member time for completion of grant.
Collaborator Contribution University College London - Provided expertise and intellectual input regarding current urinary tract research and study design. Provided access to laboratories and equipment (such as laser scanning confocal microscope) at University college London. Trained the Tecrea lab staff in laser scanning confocal microscopy and data analysis.
Impact Follow-on funding: accepted for new NBIC grant (currently underway) for continuing the research assessing Nanocin against UTI co-biofilms.
Start Year 2021
 
Description Testing new antimicrobials in skin and corneal infections (Peter Monk) 
Organisation JNCASR Jawaharlal Nehru Centre for Advanced Scientific Research
Country India 
Sector Academic/University 
PI Contribution Provision of 3D human skin and porcine cornea explant infection models.
Collaborator Contribution Provision of new compounds.
Impact https://pubs.acs.org/doi/10.1021/acsinfecdis.9b00334
Start Year 2019
 
Description Testing new antimicrobials in skin and corneal infections (Peter Monk) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution Provision of 3D human skin and porcine cornea explant infection models.
Collaborator Contribution Provision of new compounds.
Impact https://pubs.acs.org/doi/10.1021/acsinfecdis.9b00334
Start Year 2019
 
Description Testing the antibiotic sensitivities of Pseudomonas clinical isolates with Raman spectroscopy (Callum Highmore) 
Organisation NIHR Southampton Biomedical Research Centre
Country United Kingdom 
Sector Academic/University 
PI Contribution Research project.
Collaborator Contribution Funding.
Impact Not yet.
Start Year 2019
 
Description The Sustainable Innovation Fund: Optically enhanced antiviral transparent screen protection (Rasmita Raval) 
Organisation Diamond Coatings Limited
Country United Kingdom 
Sector Private 
PI Contribution Academic research and labs.
Collaborator Contribution Materials and subcontracting.
Impact Further collaboration on other projects with Gencoa Ltd.
Start Year 2020
 
Description The Sustainable Innovation Fund: Optically enhanced antiviral transparent screen protection (Rasmita Raval) 
Organisation Gencoa
Country United Kingdom 
Sector Private 
PI Contribution Academic research and labs.
Collaborator Contribution Materials and subcontracting.
Impact Further collaboration on other projects with Gencoa Ltd.
Start Year 2020
 
Description The Sustainable Innovation Fund: Optically enhanced antiviral transparent screen protection (Rasmita Raval) 
Organisation Innovate UK
Country United Kingdom 
Sector Public 
PI Contribution Academic research and labs.
Collaborator Contribution Materials and subcontracting.
Impact Further collaboration on other projects with Gencoa Ltd.
Start Year 2020
 
Description The Sustainable Innovation Fund: Optically enhanced antiviral transparent screen protection (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Academic research and labs.
Collaborator Contribution Materials and subcontracting.
Impact Further collaboration on other projects with Gencoa Ltd.
Start Year 2020
 
Description The University of Sheffield - Kraton Collaboration (Andrew Parnell) 
Organisation University of Sheffield
Country United Kingdom 
Sector Academic/University 
PI Contribution We have used the existing commercially available block copolymers to show how important stiffness is on producing materials that have surface antibacterial properties. These are stiff but also have rubbery behaviour making them suitable for a whole host of technological applications.
Collaborator Contribution Kraton have and will continue to provide an assortment of cutting edge block copolymers. These are bcp's with varying chain architecture. These are currently being synthesised in their pilot plant in Houston. In principle they have the capability to made at scale and are low cost due to the feedstock material. They also have been used previously in some medical implants, as such the routes to gaining clearance will be easier.
Impact A draft of a patent is currently being processed by my technology transfer office.
Start Year 2021
 
Description The effect of low frequency ultrasound on urinary catheter biofilms: a crossover study (Follow on funding) (Sandra Wilks) 
Organisation NanoVibronix Inc
Country United States 
Sector Private 
PI Contribution Follow on qualitative study on acceptability of low frequency acoustic device for catheter users.
Collaborator Contribution Additional funding of £42000 allowing a qualitative, semi-structured interview study on additional participants testing the low frequency acoustic device for management of indwelling urinary catheters. Providing information and data for NICE guidance and product development.
Impact None yet.
Start Year 2021
 
Description The effect of low frequency ultrasound on urinary catheter biofilms: a crossover study (Follow on funding) (Sandra Wilks) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Follow on qualitative study on acceptability of low frequency acoustic device for catheter users.
Collaborator Contribution Additional funding of £42000 allowing a qualitative, semi-structured interview study on additional participants testing the low frequency acoustic device for management of indwelling urinary catheters. Providing information and data for NICE guidance and product development.
Impact None yet.
Start Year 2021
 
Description Transformative Imaging for Quantitative Biology (TIQBio) Partnership (Sumeet Mahajan, Peter Smith, David Richardson) 
Organisation AstraZeneca
Country United Kingdom 
Sector Private 
PI Contribution EPSRC research grant EP/V038036/1 The Transformative Imaging for Quantitative Biology (TIQBio) partnership aims to develop disruptive technology for the benefit of UK Plc and for solving problems in industry and academia. The mainstay of current imaging methods to look at pre-clinical biological samples is fluorescence microscopy. This technique relies on the use of tags, which emit light when illuminated by the microscope, allowing the location of the structures or molecules to which they are attached to be determined. Insertion or attachment of a tag is an invasive process for any living system and can alter its behaviour and the way it functions. Furthermore, all living systems, tissue and cells are inherently 3-dimensional. Therefore to image in 3D one has to point-by-point collect fluorescence signal and reconstruct an image. This is a very slow and damaging process especially for 3-D live samples that represent real-life conditions. For discovering new drugs or for studying mechanisms in diseases or healing it is obvious that one should use conditions that are as near to real life as possible, before human testing. This is why most biomedical researchers and industrial sectors that operate in the area of diseases, drugs or therapeutics want to use life-like samples. At the moment however, the tools to image them in 3D and in an unperturbed, non-damaging manner simply do not exist. Furthermore, it is desirable to work at the highest resolution so we can see the smallest things that exist at the nanoscale in such biological systems and obtain holistic information about the chemical composition and structural order. This information will reveal unprecedented insight and hence help understand diseases or why a particular drug candidate does or does not work allowing better ones to be made. TIQBio will address these challenges so that unperturbed, live imaging can be carried out at an unprecedented resolution level in full 3D, with holistic information from multiple readouts carried out rapidly on 100s of test biological models. These innovative tools and technologies will allow the discovery of drugs to be improved, reduce costs for bringing a drug to market benefiting the pharma industry and patients alike. Patients with rare diseases or in lower income countries may gain access to new drugs because of the proposed disruptive technology. Biomedical researchers will benefit as they will be able to understand phenomena without misleading results due to tags; the use of real life-like models will better inform or protect the public through the development of therapies or defence countermeasures.
Collaborator Contribution Full partners in this research project.
Impact None yet.
Start Year 2021
 
Description Transformative Imaging for Quantitative Biology (TIQBio) Partnership (Sumeet Mahajan, Peter Smith, David Richardson) 
Organisation Defence Science & Technology Laboratory (DSTL)
Country United Kingdom 
Sector Public 
PI Contribution EPSRC research grant EP/V038036/1 The Transformative Imaging for Quantitative Biology (TIQBio) partnership aims to develop disruptive technology for the benefit of UK Plc and for solving problems in industry and academia. The mainstay of current imaging methods to look at pre-clinical biological samples is fluorescence microscopy. This technique relies on the use of tags, which emit light when illuminated by the microscope, allowing the location of the structures or molecules to which they are attached to be determined. Insertion or attachment of a tag is an invasive process for any living system and can alter its behaviour and the way it functions. Furthermore, all living systems, tissue and cells are inherently 3-dimensional. Therefore to image in 3D one has to point-by-point collect fluorescence signal and reconstruct an image. This is a very slow and damaging process especially for 3-D live samples that represent real-life conditions. For discovering new drugs or for studying mechanisms in diseases or healing it is obvious that one should use conditions that are as near to real life as possible, before human testing. This is why most biomedical researchers and industrial sectors that operate in the area of diseases, drugs or therapeutics want to use life-like samples. At the moment however, the tools to image them in 3D and in an unperturbed, non-damaging manner simply do not exist. Furthermore, it is desirable to work at the highest resolution so we can see the smallest things that exist at the nanoscale in such biological systems and obtain holistic information about the chemical composition and structural order. This information will reveal unprecedented insight and hence help understand diseases or why a particular drug candidate does or does not work allowing better ones to be made. TIQBio will address these challenges so that unperturbed, live imaging can be carried out at an unprecedented resolution level in full 3D, with holistic information from multiple readouts carried out rapidly on 100s of test biological models. These innovative tools and technologies will allow the discovery of drugs to be improved, reduce costs for bringing a drug to market benefiting the pharma industry and patients alike. Patients with rare diseases or in lower income countries may gain access to new drugs because of the proposed disruptive technology. Biomedical researchers will benefit as they will be able to understand phenomena without misleading results due to tags; the use of real life-like models will better inform or protect the public through the development of therapies or defence countermeasures.
Collaborator Contribution Full partners in this research project.
Impact None yet.
Start Year 2021
 
Description Transformative Imaging for Quantitative Biology (TIQBio) Partnership (Sumeet Mahajan, Peter Smith, David Richardson) 
Organisation Engineering and Physical Sciences Research Council (EPSRC)
Country United Kingdom 
Sector Public 
PI Contribution EPSRC research grant EP/V038036/1 The Transformative Imaging for Quantitative Biology (TIQBio) partnership aims to develop disruptive technology for the benefit of UK Plc and for solving problems in industry and academia. The mainstay of current imaging methods to look at pre-clinical biological samples is fluorescence microscopy. This technique relies on the use of tags, which emit light when illuminated by the microscope, allowing the location of the structures or molecules to which they are attached to be determined. Insertion or attachment of a tag is an invasive process for any living system and can alter its behaviour and the way it functions. Furthermore, all living systems, tissue and cells are inherently 3-dimensional. Therefore to image in 3D one has to point-by-point collect fluorescence signal and reconstruct an image. This is a very slow and damaging process especially for 3-D live samples that represent real-life conditions. For discovering new drugs or for studying mechanisms in diseases or healing it is obvious that one should use conditions that are as near to real life as possible, before human testing. This is why most biomedical researchers and industrial sectors that operate in the area of diseases, drugs or therapeutics want to use life-like samples. At the moment however, the tools to image them in 3D and in an unperturbed, non-damaging manner simply do not exist. Furthermore, it is desirable to work at the highest resolution so we can see the smallest things that exist at the nanoscale in such biological systems and obtain holistic information about the chemical composition and structural order. This information will reveal unprecedented insight and hence help understand diseases or why a particular drug candidate does or does not work allowing better ones to be made. TIQBio will address these challenges so that unperturbed, live imaging can be carried out at an unprecedented resolution level in full 3D, with holistic information from multiple readouts carried out rapidly on 100s of test biological models. These innovative tools and technologies will allow the discovery of drugs to be improved, reduce costs for bringing a drug to market benefiting the pharma industry and patients alike. Patients with rare diseases or in lower income countries may gain access to new drugs because of the proposed disruptive technology. Biomedical researchers will benefit as they will be able to understand phenomena without misleading results due to tags; the use of real life-like models will better inform or protect the public through the development of therapies or defence countermeasures.
Collaborator Contribution Full partners in this research project.
Impact None yet.
Start Year 2021
 
Description Transformative Imaging for Quantitative Biology (TIQBio) Partnership (Sumeet Mahajan, Peter Smith, David Richardson) 
Organisation M Squared Lasers Ltd
Country United Kingdom 
Sector Private 
PI Contribution EPSRC research grant EP/V038036/1 The Transformative Imaging for Quantitative Biology (TIQBio) partnership aims to develop disruptive technology for the benefit of UK Plc and for solving problems in industry and academia. The mainstay of current imaging methods to look at pre-clinical biological samples is fluorescence microscopy. This technique relies on the use of tags, which emit light when illuminated by the microscope, allowing the location of the structures or molecules to which they are attached to be determined. Insertion or attachment of a tag is an invasive process for any living system and can alter its behaviour and the way it functions. Furthermore, all living systems, tissue and cells are inherently 3-dimensional. Therefore to image in 3D one has to point-by-point collect fluorescence signal and reconstruct an image. This is a very slow and damaging process especially for 3-D live samples that represent real-life conditions. For discovering new drugs or for studying mechanisms in diseases or healing it is obvious that one should use conditions that are as near to real life as possible, before human testing. This is why most biomedical researchers and industrial sectors that operate in the area of diseases, drugs or therapeutics want to use life-like samples. At the moment however, the tools to image them in 3D and in an unperturbed, non-damaging manner simply do not exist. Furthermore, it is desirable to work at the highest resolution so we can see the smallest things that exist at the nanoscale in such biological systems and obtain holistic information about the chemical composition and structural order. This information will reveal unprecedented insight and hence help understand diseases or why a particular drug candidate does or does not work allowing better ones to be made. TIQBio will address these challenges so that unperturbed, live imaging can be carried out at an unprecedented resolution level in full 3D, with holistic information from multiple readouts carried out rapidly on 100s of test biological models. These innovative tools and technologies will allow the discovery of drugs to be improved, reduce costs for bringing a drug to market benefiting the pharma industry and patients alike. Patients with rare diseases or in lower income countries may gain access to new drugs because of the proposed disruptive technology. Biomedical researchers will benefit as they will be able to understand phenomena without misleading results due to tags; the use of real life-like models will better inform or protect the public through the development of therapies or defence countermeasures.
Collaborator Contribution Full partners in this research project.
Impact None yet.
Start Year 2021
 
Description Transformative Imaging for Quantitative Biology (TIQBio) Partnership (Sumeet Mahajan, Peter Smith, David Richardson) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution EPSRC research grant EP/V038036/1 The Transformative Imaging for Quantitative Biology (TIQBio) partnership aims to develop disruptive technology for the benefit of UK Plc and for solving problems in industry and academia. The mainstay of current imaging methods to look at pre-clinical biological samples is fluorescence microscopy. This technique relies on the use of tags, which emit light when illuminated by the microscope, allowing the location of the structures or molecules to which they are attached to be determined. Insertion or attachment of a tag is an invasive process for any living system and can alter its behaviour and the way it functions. Furthermore, all living systems, tissue and cells are inherently 3-dimensional. Therefore to image in 3D one has to point-by-point collect fluorescence signal and reconstruct an image. This is a very slow and damaging process especially for 3-D live samples that represent real-life conditions. For discovering new drugs or for studying mechanisms in diseases or healing it is obvious that one should use conditions that are as near to real life as possible, before human testing. This is why most biomedical researchers and industrial sectors that operate in the area of diseases, drugs or therapeutics want to use life-like samples. At the moment however, the tools to image them in 3D and in an unperturbed, non-damaging manner simply do not exist. Furthermore, it is desirable to work at the highest resolution so we can see the smallest things that exist at the nanoscale in such biological systems and obtain holistic information about the chemical composition and structural order. This information will reveal unprecedented insight and hence help understand diseases or why a particular drug candidate does or does not work allowing better ones to be made. TIQBio will address these challenges so that unperturbed, live imaging can be carried out at an unprecedented resolution level in full 3D, with holistic information from multiple readouts carried out rapidly on 100s of test biological models. These innovative tools and technologies will allow the discovery of drugs to be improved, reduce costs for bringing a drug to market benefiting the pharma industry and patients alike. Patients with rare diseases or in lower income countries may gain access to new drugs because of the proposed disruptive technology. Biomedical researchers will benefit as they will be able to understand phenomena without misleading results due to tags; the use of real life-like models will better inform or protect the public through the development of therapies or defence countermeasures.
Collaborator Contribution Full partners in this research project.
Impact None yet.
Start Year 2021
 
Description UKRI Interdisciplinary Centre for Circular Chemical Economy (Eileen Yu) 
Organisation Karlsruhe Institute of Technology
Country Germany 
Sector Academic/University 
PI Contribution The overall programme is the development of a sector-wide solution with deep circularity interventions, by creating a circular resources flow of olefin-the raw material for 70% of all organic chemical production. Our whole system approach will include key sectors of production, transportation/distribution, refinery/downstream, use and waste recycling, to reduce fossil reliance and improve productivity and sustainability of the whole process industry.
Collaborator Contribution The partners will generate a cross-disciplinary platform combining synergistic innovations in science/engineering with social scientists to comprehend the whole system industrial symbiosis and market/policy/incentive design. The Core Research Programme is organised around three interconnected themes: (1) Key technologies to enable olefin production from alternative/recycling wastes streams and design more reusable chemicals via advanced catalytic processes; (2) Process integration, whole system analysis and value chain evaluation, and (3) Policy, society and finance. Through detailed process modelling, economic analysis and environmental assessment of technology solutions along the supply chain, accelerated understanding, opportunities and optimum solutions to achieve circularity of olefin-derived resources flow will be attained.
Impact It is a multi-disciplinary collaboration involving with chemistry, biology and processing engineering.
Start Year 2021
 
Description UKRI Interdisciplinary Centre for Circular Chemical Economy (Eileen Yu) 
Organisation Loughborough University
Country United Kingdom 
Sector Academic/University 
PI Contribution The overall programme is the development of a sector-wide solution with deep circularity interventions, by creating a circular resources flow of olefin-the raw material for 70% of all organic chemical production. Our whole system approach will include key sectors of production, transportation/distribution, refinery/downstream, use and waste recycling, to reduce fossil reliance and improve productivity and sustainability of the whole process industry.
Collaborator Contribution The partners will generate a cross-disciplinary platform combining synergistic innovations in science/engineering with social scientists to comprehend the whole system industrial symbiosis and market/policy/incentive design. The Core Research Programme is organised around three interconnected themes: (1) Key technologies to enable olefin production from alternative/recycling wastes streams and design more reusable chemicals via advanced catalytic processes; (2) Process integration, whole system analysis and value chain evaluation, and (3) Policy, society and finance. Through detailed process modelling, economic analysis and environmental assessment of technology solutions along the supply chain, accelerated understanding, opportunities and optimum solutions to achieve circularity of olefin-derived resources flow will be attained.
Impact It is a multi-disciplinary collaboration involving with chemistry, biology and processing engineering.
Start Year 2021
 
Description UKRI Interdisciplinary Centre for Circular Chemical Economy (Eileen Yu) 
Organisation Princeton University
Country United States 
Sector Academic/University 
PI Contribution The overall programme is the development of a sector-wide solution with deep circularity interventions, by creating a circular resources flow of olefin-the raw material for 70% of all organic chemical production. Our whole system approach will include key sectors of production, transportation/distribution, refinery/downstream, use and waste recycling, to reduce fossil reliance and improve productivity and sustainability of the whole process industry.
Collaborator Contribution The partners will generate a cross-disciplinary platform combining synergistic innovations in science/engineering with social scientists to comprehend the whole system industrial symbiosis and market/policy/incentive design. The Core Research Programme is organised around three interconnected themes: (1) Key technologies to enable olefin production from alternative/recycling wastes streams and design more reusable chemicals via advanced catalytic processes; (2) Process integration, whole system analysis and value chain evaluation, and (3) Policy, society and finance. Through detailed process modelling, economic analysis and environmental assessment of technology solutions along the supply chain, accelerated understanding, opportunities and optimum solutions to achieve circularity of olefin-derived resources flow will be attained.
Impact It is a multi-disciplinary collaboration involving with chemistry, biology and processing engineering.
Start Year 2021
 
Description UKRI Interdisciplinary Centre for Circular Chemical Economy (Eileen Yu) 
Organisation United Kingdom Research and Innovation
Country United Kingdom 
Sector Public 
PI Contribution The overall programme is the development of a sector-wide solution with deep circularity interventions, by creating a circular resources flow of olefin-the raw material for 70% of all organic chemical production. Our whole system approach will include key sectors of production, transportation/distribution, refinery/downstream, use and waste recycling, to reduce fossil reliance and improve productivity and sustainability of the whole process industry.
Collaborator Contribution The partners will generate a cross-disciplinary platform combining synergistic innovations in science/engineering with social scientists to comprehend the whole system industrial symbiosis and market/policy/incentive design. The Core Research Programme is organised around three interconnected themes: (1) Key technologies to enable olefin production from alternative/recycling wastes streams and design more reusable chemicals via advanced catalytic processes; (2) Process integration, whole system analysis and value chain evaluation, and (3) Policy, society and finance. Through detailed process modelling, economic analysis and environmental assessment of technology solutions along the supply chain, accelerated understanding, opportunities and optimum solutions to achieve circularity of olefin-derived resources flow will be attained.
Impact It is a multi-disciplinary collaboration involving with chemistry, biology and processing engineering.
Start Year 2021
 
Description UKRI ideas to address COVID-19 - Innovate UK: Safepay - Point of Sale Cleansing System (Rasmita Raval) 
Organisation European Circuits Limited
Country United Kingdom 
Sector Private 
PI Contribution Academic expertise & lab use.
Collaborator Contribution Materials and labour sub-contracting.
Impact Project ongoing.
Start Year 2021
 
Description UKRI ideas to address COVID-19 - Innovate UK: Safepay - Point of Sale Cleansing System (Rasmita Raval) 
Organisation Innovate UK
Country United Kingdom 
Sector Public 
PI Contribution Academic expertise & lab use.
Collaborator Contribution Materials and labour sub-contracting.
Impact Project ongoing.
Start Year 2021
 
Description UKRI ideas to address COVID-19 - Innovate UK: Safepay - Point of Sale Cleansing System (Rasmita Raval) 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution Academic expertise & lab use.
Collaborator Contribution Materials and labour sub-contracting.
Impact Project ongoing.
Start Year 2021
 
Description UKRI ideas to address COVID-19 - Innovate UK: Safepay - Point of Sale Cleansing System (Rasmita Raval) 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Academic expertise & lab use.
Collaborator Contribution Materials and labour sub-contracting.
Impact Project ongoing.
Start Year 2021
 
Description US Partnering Award: Building a globally leading partnership between NBIC and CBE international biofilm centres (Jeremy Webb) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution This US partnering award will allow us to build an internationally leading partnership between the US Centre for Biofilm Engineering (CBE) at Montana State University and the UK's newly established National Biofilm Innovation Centre (NBIC). The main objective of this US-UK partnership will be to bring together complementary academic expertise and thought leadership in biofilms, contamination of metal surfaces and biocorrosion processes across the life and physical sciences and engineering domains within NBIC and CBE in order to identify the key knowledge gaps and research challenges for future projects and research collaboration. Each centre has identified a group of interdisciplinary experts that will come together with a focus on understanding the interactions between complex microbial communities and metals and addressing key challenges with the field.
Collaborator Contribution BBSRC funding reference: BB/S020713/1 This award will be essential to drive a global partnership between CBE and UK's National Biofilms Innovation Centre (NBIC) by bringing together complementary strengths and expertise that will amplify efforts across both centres to address core scientific biofilm challenges. The NBIC-CBE partnership will further foster synergistic interactions between the US and NBIC's wider UK partnership of 27 research organizations plus government agencies and industry. NBIC cannot fund this activity from current funding because its budget and remit is focused on promoting academic-industry partnerships, innovation and translational activity within the UK. In contrast, the proposed partnership will require the international exchange of leading academic expertise to establish a joint programme and strategies for fundamental research focused on microbe-metal interactions. This award will also attract additional funding and in-kind support from our US partners. As part of the joint CBE-NBIC fora funded by this award, the CBE will send up to 10 researchers to the UK forum. These meetings will identify strategic priorities for the first projects and exchanges which will be the key outcome of this US partnering award. Following on from these outcomes, we have already identified additional sources of support to fund the first pump-prime projects and placements to deliver the strategy and outcomes of the US Partnering award. On the UK side this will be supported by a recently awarded Flexible Talent and Mobility Account (FTMA) to NBIC which can support PhD or ECR mobility and we anticipate to fund up to 5 exchanges, for which CBE has agreed to match these exchanges. These FTMA funds will provide an invaluable mechanism to pump prime these interactions across the partnership. Shared access to facilities and mentoring across NBIC and CBE also represents a significant in-kind US contribution. Taken together we anticipate that this cash and in-kind contribution of our faculty and staff for interaction with visitors and fora can be valued at $50,000. To build a globally leading UK-US partnership, CBE and NBIC now seek strategic investment that will allow us to bridge the interdisciplinary training and research challenges identified above. This investment will facilitate major strategic collaborative initiatives, promote synergies in addressing major global challenges in biofilms, and provide the bedrock for future UK-US partnership between the two centres.
Impact None yet.
Start Year 2019
 
Description US Partnering Award: Building a globally leading partnership between NBIC and CBE international biofilm centres (Jeremy Webb) 
Organisation Montana State University
Country United States 
Sector Academic/University 
PI Contribution This US partnering award will allow us to build an internationally leading partnership between the US Centre for Biofilm Engineering (CBE) at Montana State University and the UK's newly established National Biofilm Innovation Centre (NBIC). The main objective of this US-UK partnership will be to bring together complementary academic expertise and thought leadership in biofilms, contamination of metal surfaces and biocorrosion processes across the life and physical sciences and engineering domains within NBIC and CBE in order to identify the key knowledge gaps and research challenges for future projects and research collaboration. Each centre has identified a group of interdisciplinary experts that will come together with a focus on understanding the interactions between complex microbial communities and metals and addressing key challenges with the field.
Collaborator Contribution BBSRC funding reference: BB/S020713/1 This award will be essential to drive a global partnership between CBE and UK's National Biofilms Innovation Centre (NBIC) by bringing together complementary strengths and expertise that will amplify efforts across both centres to address core scientific biofilm challenges. The NBIC-CBE partnership will further foster synergistic interactions between the US and NBIC's wider UK partnership of 27 research organizations plus government agencies and industry. NBIC cannot fund this activity from current funding because its budget and remit is focused on promoting academic-industry partnerships, innovation and translational activity within the UK. In contrast, the proposed partnership will require the international exchange of leading academic expertise to establish a joint programme and strategies for fundamental research focused on microbe-metal interactions. This award will also attract additional funding and in-kind support from our US partners. As part of the joint CBE-NBIC fora funded by this award, the CBE will send up to 10 researchers to the UK forum. These meetings will identify strategic priorities for the first projects and exchanges which will be the key outcome of this US partnering award. Following on from these outcomes, we have already identified additional sources of support to fund the first pump-prime projects and placements to deliver the strategy and outcomes of the US Partnering award. On the UK side this will be supported by a recently awarded Flexible Talent and Mobility Account (FTMA) to NBIC which can support PhD or ECR mobility and we anticipate to fund up to 5 exchanges, for which CBE has agreed to match these exchanges. These FTMA funds will provide an invaluable mechanism to pump prime these interactions across the partnership. Shared access to facilities and mentoring across NBIC and CBE also represents a significant in-kind US contribution. Taken together we anticipate that this cash and in-kind contribution of our faculty and staff for interaction with visitors and fora can be valued at $50,000. To build a globally leading UK-US partnership, CBE and NBIC now seek strategic investment that will allow us to bridge the interdisciplinary training and research challenges identified above. This investment will facilitate major strategic collaborative initiatives, promote synergies in addressing major global challenges in biofilms, and provide the bedrock for future UK-US partnership between the two centres.
Impact None yet.
Start Year 2019
 
Description US Partnering Award: Building a globally leading partnership between NBIC and CBE international biofilm centres (Jeremy Webb) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution This US partnering award will allow us to build an internationally leading partnership between the US Centre for Biofilm Engineering (CBE) at Montana State University and the UK's newly established National Biofilm Innovation Centre (NBIC). The main objective of this US-UK partnership will be to bring together complementary academic expertise and thought leadership in biofilms, contamination of metal surfaces and biocorrosion processes across the life and physical sciences and engineering domains within NBIC and CBE in order to identify the key knowledge gaps and research challenges for future projects and research collaboration. Each centre has identified a group of interdisciplinary experts that will come together with a focus on understanding the interactions between complex microbial communities and metals and addressing key challenges with the field.
Collaborator Contribution BBSRC funding reference: BB/S020713/1 This award will be essential to drive a global partnership between CBE and UK's National Biofilms Innovation Centre (NBIC) by bringing together complementary strengths and expertise that will amplify efforts across both centres to address core scientific biofilm challenges. The NBIC-CBE partnership will further foster synergistic interactions between the US and NBIC's wider UK partnership of 27 research organizations plus government agencies and industry. NBIC cannot fund this activity from current funding because its budget and remit is focused on promoting academic-industry partnerships, innovation and translational activity within the UK. In contrast, the proposed partnership will require the international exchange of leading academic expertise to establish a joint programme and strategies for fundamental research focused on microbe-metal interactions. This award will also attract additional funding and in-kind support from our US partners. As part of the joint CBE-NBIC fora funded by this award, the CBE will send up to 10 researchers to the UK forum. These meetings will identify strategic priorities for the first projects and exchanges which will be the key outcome of this US partnering award. Following on from these outcomes, we have already identified additional sources of support to fund the first pump-prime projects and placements to deliver the strategy and outcomes of the US Partnering award. On the UK side this will be supported by a recently awarded Flexible Talent and Mobility Account (FTMA) to NBIC which can support PhD or ECR mobility and we anticipate to fund up to 5 exchanges, for which CBE has agreed to match these exchanges. These FTMA funds will provide an invaluable mechanism to pump prime these interactions across the partnership. Shared access to facilities and mentoring across NBIC and CBE also represents a significant in-kind US contribution. Taken together we anticipate that this cash and in-kind contribution of our faculty and staff for interaction with visitors and fora can be valued at $50,000. To build a globally leading UK-US partnership, CBE and NBIC now seek strategic investment that will allow us to bridge the interdisciplinary training and research challenges identified above. This investment will facilitate major strategic collaborative initiatives, promote synergies in addressing major global challenges in biofilms, and provide the bedrock for future UK-US partnership between the two centres.
Impact None yet.
Start Year 2019
 
Description US Partnering Award: Building globally leading partnership in biofilm standardisation between USA and UK's biofilm innovation centres (Jeremy Webb) 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC)
Country United Kingdom 
Sector Public 
PI Contribution The main objective of this US-UK partnership is to bring together complementary expertise (academic, industrial and regulatory), of the US Centre for Biofilm Engineering and the UKs National Biofilms Innovation Centre, to address the need for standardisation in the biofilms field and to devise a dedicated biofilm standardisation programme. The partnership will create: i) discussion channel for researchers from academia and industry, metrology institutes and regulatory agencies; ii) a forum to direct and progress biofilm standardisation; iii) platform to engage in pre- and normative activities, leading to international standards.
Collaborator Contribution BBSRC funding reference BB/V018191/1 NBIC is included in the BBSRC's delivery plan as a key component of their Research and Innovation priorities, in order to 'connect researchers across the UK and catalyse collaboration with industry in the study of biofilms to achieve breakthrough innovations'.3This award will be essential to strengthen the global partnership between UK's NBIC and CBE (US) and to address the biofilm standardisation challenge. The NBIC-CBE partnership will further foster synergistic interactions between the US and NBIC's wider UK partnership of > 50 research organizations plus government and regulatory agencies and industry.This award will also attract additional funding and in-kind support from our US partners. As part of the joint CBE-NBIC for a,funded by this award, the CBE will plan to send up to 3 representatives to the UK forum. These meetings will identify strategic priorities for standardisation activities and specific projects and exchanges,which will be the key outcome of this US partnering award. Shared access to facilities,such as the CBE's Standardized Biofilm Methods Laboratory,and mentoring across NBIC and CBE also represents a significant in-kind US contribution. Taken together,we anticipate that cash and in-kind contribution of CBE's representatives for interactions with visitors and organisation of the fora can be valued at $20,000 NBIC is unable to fund this activity from current funding because its investment and remit is focused on promoting academic-industry partnerships, innovation and translational activity within the UK. In contrast, the proposed partnership will require the international exchange of leading academic, metrology and regulatory expertise. It will put the UK at a driving seat for the standardisation supporting,in the long term, the UK's economy and prosperity.
Impact None yet.
Start Year 2022
 
Description US Partnering Award: Building globally leading partnership in biofilm standardisation between USA and UK's biofilm innovation centres (Jeremy Webb) 
Organisation Montana State University
Country United States 
Sector Academic/University 
PI Contribution The main objective of this US-UK partnership is to bring together complementary expertise (academic, industrial and regulatory), of the US Centre for Biofilm Engineering and the UKs National Biofilms Innovation Centre, to address the need for standardisation in the biofilms field and to devise a dedicated biofilm standardisation programme. The partnership will create: i) discussion channel for researchers from academia and industry, metrology institutes and regulatory agencies; ii) a forum to direct and progress biofilm standardisation; iii) platform to engage in pre- and normative activities, leading to international standards.
Collaborator Contribution BBSRC funding reference BB/V018191/1 NBIC is included in the BBSRC's delivery plan as a key component of their Research and Innovation priorities, in order to 'connect researchers across the UK and catalyse collaboration with industry in the study of biofilms to achieve breakthrough innovations'.3This award will be essential to strengthen the global partnership between UK's NBIC and CBE (US) and to address the biofilm standardisation challenge. The NBIC-CBE partnership will further foster synergistic interactions between the US and NBIC's wider UK partnership of > 50 research organizations plus government and regulatory agencies and industry.This award will also attract additional funding and in-kind support from our US partners. As part of the joint CBE-NBIC for a,funded by this award, the CBE will plan to send up to 3 representatives to the UK forum. These meetings will identify strategic priorities for standardisation activities and specific projects and exchanges,which will be the key outcome of this US partnering award. Shared access to facilities,such as the CBE's Standardized Biofilm Methods Laboratory,and mentoring across NBIC and CBE also represents a significant in-kind US contribution. Taken together,we anticipate that cash and in-kind contribution of CBE's representatives for interactions with visitors and organisation of the fora can be valued at $20,000 NBIC is unable to fund this activity from current funding because its investment and remit is focused on promoting academic-industry partnerships, innovation and translational activity within the UK. In contrast, the proposed partnership will require the international exchange of leading academic, metrology and regulatory expertise. It will put the UK at a driving seat for the standardisation supporting,in the long term, the UK's economy and prosperity.
Impact None yet.
Start Year 2022
 
Description US Partnering Award: Building globally leading partnership in biofilm standardisation between USA and UK's biofilm innovation centres (Jeremy Webb) 
Organisation National Biofilms Innovation Centre
Sector Private 
PI Contribution The main objective of this US-UK partnership is to bring together complementary expertise (academic, industrial and regulatory), of the US Centre for Biofilm Engineering and the UKs National Biofilms Innovation Centre, to address the need for standardisation in the biofilms field and to devise a dedicated biofilm standardisation programme. The partnership will create: i) discussion channel for researchers from academia and industry, metrology institutes and regulatory agencies; ii) a forum to direct and progress biofilm standardisation; iii) platform to engage in pre- and normative activities, leading to international standards.
Collaborator Contribution BBSRC funding reference BB/V018191/1 NBIC is included in the BBSRC's delivery plan as a key component of their Research and Innovation priorities, in order to 'connect researchers across the UK and catalyse collaboration with industry in the study of biofilms to achieve breakthrough innovations'.3This award will be essential to strengthen the global partnership between UK's NBIC and CBE (US) and to address the biofilm standardisation challenge. The NBIC-CBE partnership will further foster synergistic interactions between the US and NBIC's wider UK partnership of > 50 research organizations plus government and regulatory agencies and industry.This award will also attract additional funding and in-kind support from our US partners. As part of the joint CBE-NBIC for a,funded by this award, the CBE will plan to send up to 3 representatives to the UK forum. These meetings will identify strategic priorities for standardisation activities and specific projects and exchanges,which will be the key outcome of this US partnering award. Shared access to facilities,such as the CBE's Standardized Biofilm Methods Laboratory,and mentoring across NBIC and CBE also represents a significant in-kind US contribution. Taken together,we anticipate that cash and in-kind contribution of CBE's representatives for interactions with visitors and organisation of the fora can be valued at $20,000 NBIC is unable to fund this activity from current funding because its investment and remit is focused on promoting academic-industry partnerships, innovation and translational activity within the UK. In contrast, the proposed partnership will require the international exchange of leading academic, metrology and regulatory expertise. It will put the UK at a driving seat for the standardisation supporting,in the long term, the UK's economy and prosperity.
Impact None yet.
Start Year 2022
 
Description University of Birmingham - NitroPep collaboration (Felicity de Cogan) 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution We have provided microbiological testing of NitroPep surfaces including developing novel antimicrobial resistance data based on how antimicrobial surfaces behave in real world trials.
Collaborator Contribution NitroPep Ltd have provided antimicrobial testing surfaces. They have also included us with communications with large companies who have brough their products to allow us to carry out on site testing.
Impact No outputs to date, as the project is still in the early stages. However, we are working on several papers together.
Start Year 2018
 
Description Use of an ultrasonic cleaning device for wounds (Callum Highmore) 
Organisation NIHR Southampton Biomedical Research Centre
Country United Kingdom 
Sector Academic/University 
PI Contribution Research for this grant.
Collaborator Contribution Funding.
Impact Research project titled 'Use of an ultrasonic cleaning device for wounds'.
Start Year 2019
 
Description Use of an ultrasonic cleaning device for wounds (Callum Highmore) 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Research for this grant.
Collaborator Contribution Funding.
Impact Research project titled 'Use of an ultrasonic cleaning device for wounds'.
Start Year 2019
 
Description Visualising pH in oral biofilms 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution We are contributing know how which includes a biofilm model incorporating Steptococcus mutans and also pH sensitive optical nanosensors
Collaborator Contribution Unilever are financing a post doctoral researcher to undertake the research, plus the know how behind the active ingredients in their products to test
Impact One manuscript submitted and available on a preprint server. Yes, it is multi-disciplinary since it incorporates microbiology to investigate the bacteria, chemistry to build the nanosensors and physics to optimise the imaging. Blunk, B., Perkins, M., Chauhan, V.M, Aylott, J.W., and Hardie, K.R. (2020) Fluorescent Nanosensors Reveal Dynamic pH Gradients During Biofilm Formation. https://biorxiv.org/cgi/content/short/2020.07.31.230474v1
Start Year 2021
 
Description Waste water treatment (Cait MacPhee) 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution Bacteria in wastewater treatment can form complex network-like structures that can be detrimental to the treatment process. We are performing experiments and computer simulations to understand the mechanisms by which these structures form. The insight gained will help us inhibit their occurrence.
Collaborator Contribution Materials, samples and images; collaborative discussions.
Impact No outputs yet. This is a physical sciences/ biological sciences/ industry collaboration.
Start Year 2021
 
Description Waste water treatment (Cait MacPhee) 
Organisation Veolia Environmental Services
Country United Kingdom 
Sector Private 
PI Contribution Bacteria in wastewater treatment can form complex network-like structures that can be detrimental to the treatment process. We are performing experiments and computer simulations to understand the mechanisms by which these structures form. The insight gained will help us inhibit their occurrence.
Collaborator Contribution Materials, samples and images; collaborative discussions.
Impact No outputs yet. This is a physical sciences/ biological sciences/ industry collaboration.
Start Year 2021
 
Description optical nano sensors reporting on biofilm microniches 
Organisation Unilever
Country United Kingdom 
Sector Private 
PI Contribution We have contributed prior knowledge on the production and development of optical nanosensors as well as protocols and bacterial strains to grow and analyse biofilms
Collaborator Contribution They have contributed funding to match BBSRC and university of Nottingham funding to underpin 3 PhD Studentships (1 BBSRC iCASE, one BBSRC DTP) Regular meetings to direct the projects plus hosting of the students for placements and data generation
Impact The collaboration is multi-disciplinary as it involves microbiology and also polymer chemistry Brown, J.M., Blunk, B., Williams, P., and Hardie, K.R. (2019) Microfluidic-based growth and imaging of bacterial biofilms. Bio-101. https://bio-protocol.org/bio101/about.aspx. https://en.bio-protocol.org/bio101/e3460 Awarded Lectures: • 2019: Royal Society of Biology Annual Charter Lecture. 'Bacteria unite to resist antibiotics: ways we can fight back.' May 15th, Law Society, London. https://www.rsb.org.uk/news/14-news/2151-more-than-100-members-attend-this-year-s-agm • 2019: Royal Society of Biology East Midlands Branch Annual Colin Leakey Memorial Lecture. 'The race between bacterial biofilm communities and us in fight against antimicrobial resistance' November 13th, University of Nottingham Outreach Event • July 2019: Royal Society Summer Exhibition Super Biomaterials to fight Super Bugs. https://www.nottingham.ac.uk/research/groups/biomaterials-discovery/royal-society-summer-science-exhibition-2019/index.aspx
Start Year 2016
 
Description perfectus biomed 
Organisation Perfectus Biomed Ltd.
Country United Kingdom 
Sector Private 
PI Contribution test
Collaborator Contribution test
Impact test paper
Start Year 2021
 
Title BACTIGON 
Description The BACTIGON mark is filed in the category of Class 005 Pharmaceuticals, medical and veterinary preparations; sanitary preparations for medical purposes; dietetic food and substances adapted for medical or veterinary use, food for babies; dietary supplements for human beings and animals; plasters, materials for dressings; material for stopping teeth, dental wax; disinfectants; preparations for destroying vermin; fungicides, herbicides. 
IP Reference  
Protection Trade Mark
Year Protection Granted 2018
Licensed No
Impact Profs. Morgan Alexander and Paul Williams are NBIC Co Investigators from the University of Nottingham. With support from the Wellcome Trust they have developed a high throughput polymer microarray methodology to screen for biofilm resistant polymers. Over 20,000 assays on 1300 unique co-polymers resulted in the discovery of a new class of acrylate polymers that resisted bacterial biofilm formation called BACTIGON®.
 
Title Chemical modification of solids as backbones for controlled deposition of metal or bimetallic nanoparticles for tuning surface and antibacterial properties 
Description A method of tuning surfaces and their antibacterial properties including hydrophobicity and bacterial adhesion comprising the creation of a backbone structure for the in situ formation of metal nanoparticles on metallic and non-metallic surfaces. Preferably the surface is first functionalised through chemical or electrochemical reduction of a diazonium salt with carboxyphenyl or decylphenyl functionalities, followed by the controlled reduction of metal salts into metal nanoparticles. The functionalisation is preferably on a silica or alumina substrate and the nanoparticles are preferably silver and/or copper. The surfaces may form antibacterial and antibiofilm coatings on wound dressings and medical devices. 
IP Reference GB2592233 
Protection Patent application published
Year Protection Granted 2021
Licensed Commercial In Confidence
Impact This research is being continued to further develop this technology.
 
Title Formation of antimicrobial surfaces using molecular films via quaternary salts ion pairing attachment and incorporation of metal nanoparticles 
Description The use of negatively charged functionalities on surfaces for the attachment of positively charged quaternary ammonium antibacterial compounds via ion pairing for their application as effective and tuneable antimicrobial and antibiofilm surfaces. Preferably the surface is first functionalised through chemical or electrochemical reduction of a diazonium salt with carboxyphenyl functionality which is then used to immobilise the quaternary ammonium salts. The ion pairs may serve as a backbone for the formation of antibacterial metal nanoparticles, particularly silver and/or copper nanoparticles. The modified surfaces can be used in medical devices, wound dressings and general surface hygiene materials such as tissues, towels, wipes and beddings. 
IP Reference GB2592369 
Protection Patent application published
Year Protection Granted 2021
Licensed Commercial In Confidence
Impact This is a new and efficient way for the prevention of biofilm formation and bacterial growth on various surfaces and we have recently completed a funding project (FIF from LCR) to exploit the results. Further investigations to use this technology in antibiofilm and frequently touched surfaces in public places are under way.
 
Title MULTI-EXCITATION RAMAN SPECTROSCOPY METHOD AND APPARATUS 
Description Method for real-time and in-situ detection of bacterial pathogens using Raman spectroscopy. 
IP Reference United Kingdom Patent Application No. 2117705.0 
Protection Patent / Patent application
Year Protection Granted 2022
Licensed No
Impact The technology is in early phase commercial development and plans are in place for a spinout company to develop products and services related to the technology.
 
Title SYNTHETIC MULTIPHASE SYSTEMS 
Description A synthetic multiphase product comprising BsIA is presented. Methods of producing a synthetic multiphase product comprising BsIA, and applications of BsIA in synthetic multiphase products are also presented. 
IP Reference EP3182836 
Protection Patent granted
Year Protection Granted 2017
Licensed No
Impact A synthetic multiphase product comprising BsIA is presented. Methods of producing a synthetic multiphase product comprising BsIA, and applications of BsIA in synthetic multiphase products are also presented.
 
Title Synthetic Multiphase Systems 
Description A synthetic multiphase product comprising BsIA is presented. Methods of producing a synthetic multiphase product comprising BsIA, and applications of BsIA in synthetic multiphase products are also presented. 
IP Reference US2017267730 
Protection Patent granted
Year Protection Granted 2017
Licensed No
Impact A synthetic multiphase product comprising BsIA is presented. Methods of producing a synthetic multiphase product comprising BsIA, and applications of BsIA in synthetic multiphase products are also presented.
 
Title Synthetic Multiphase Systems 
Description A synthetic multiphase product including an isolated biofilm surface layer protein A (BsIA), wherein the BsIA has the amino acid sequence set forth in SEQ ID NO: 28 or a variant thereof that is at least 80% identical to SEQ ID NO: 28. 
IP Reference US2020207813 
Protection Patent granted
Year Protection Granted 2020
Licensed No
Impact A synthetic multiphase product including an isolated biofilm surface layer protein A (BsIA), wherein the BsIA has the amino acid sequence set forth in SEQ ID NO: 28 or a variant thereof that is at least 80% identical to SEQ ID NO: 28.
 
Title 'first-in-human' trial (Dario Carugo) 
Description The research in this activity falls under the broader umbrella of studies in the field of urinary device development and optimisation. The project lead is co-applicant in a i4i NIHR application (currently under review) for a first-in-human clinical trial, relating to an innovative (patented) ureteric stent design developed using a microfluidic-based modelling approach. 
Type Therapeutic Intervention - Medical Devices
Current Stage Of Development Refinement. Non-clinical
Year Development Stage Completed 2020
Development Status Actively seeking support
Impact Development of innovative designs and manufacturing methods for urological devices. 
 
Title Antiviral filters for face masks and air ventilation systems to prevent coronavirus transmission (Faradin Mirkhalaf) 
Description We have developed a new technology for the modification of filters in order to capture and kill viruses and bacteria from the air flow. The modified filters were used in face masks and tested on coronavirus. After testing, the filters showed 100% efficient to remove and kill corona viruses from the air flow. The face masks have been prototyped and are in the market (see: nanoxx.co.uk).The application of this technology for air ventilation systems is under development and we are seeking industrial/investor partners to complete this mission. 
Type Preventative Intervention - Physical/Biological risk modification
Current Stage Of Development Small-scale adoption
Year Development Stage Completed 2021
Development Status Actively seeking support
Impact We are using a similar technology to modify metal and textiles to induce antibiofilm properties within our NBIC FTMA3 projects. 
URL http://nanoxx.co.uk
 
Title Nanoparticles (Eden Mannix-Fisher) 
Description Copper nanoparticles created by Pharm2Farm are being tested for their antimicrobial efficacy when mixed into paint and coated onto the surface of paint. The product can have many different applications both within and outside of medicine if successful. 
Type Products with applications outside of medicine
Current Stage Of Development Initial development
Year Development Stage Completed 2022
Development Status Under active development/distribution
Impact Should this antimicrobial work, the data generated from this secondment on the antimicrobial efficacy may generate income for Pharm2Farm and the customer AksoNobel. It may also be used to decrease the incidence of disease through utilisation as a coating on door handles, walls, beds etc. within a hospital setting. 
 
Title Non-thermal plasma device for disinfection of medical endoscopes (Robin Thorn) 
Description A novel non-thermal plasma applicator system for the decontamination of endoscope operating channels, as part of existing re-processing within hospital facilities, has been developed and is currently undergoing active further development. A non-thermal plasma generation device was co-developed by Creo Medical Ltd. and UWE Bristol. This has been optimised to enable delivery of non-thermal plasma down the lumen of surrogate endoscope operating channels within an endoscope biofilm model. Initial tests demonstrated that an antimicrobial effect was observed and was used as the basis for subsequent optimisation of the non-thermal plasma applicator system. Final system testing resulted in significant anti-biofilm activity of the non-thermal plasma within the endoscope biofilm model, against all monoculture biofilms tested. Overall, results have demonstrated that the Creo Medical Ltd. developed non-thermal plasma applicator is capable of significant decontamination of surrogate endoscope operating channels contaminated with bacterial biofilms. Further collaborative optimisation and testing is now ongoing to produce a fully functioning clinical prototype device for integration into endoscope reprocessing work flows. 
Type Therapeutic Intervention - Medical Devices
Current Stage Of Development Initial development
Year Development Stage Completed 2020
Development Status Under active development/distribution
Impact The development of this new device has enabled significant knowledge exchange between Creo Medical Ltd and UWE Bristol. 
 
Title Use of the EVPL model by Perfectus Biomed to test candidate drugs by pharmaceutical client. 
Description Perfectus Biomed have performed contract preclinical testing of a candidate therapeutic using the the EVPL model, for a pharmaceutical company. Details cannot be shared at this stage. 
Type Therapeutic Intervention - Drug
Year Development Stage Completed 2022
Development Status Under active development/distribution
Impact N/A 
 
Title Burn wound array tool (Brian Jones) 
Description We have developed a bespoke burn wound awry tool to facilitate htp wound biofilm screens and have manufactured devices and supplied them to the industry partner. 
Type Of Technology Physical Model/Kit 
Year Produced 2020 
Impact Our industry partner (Perfectus Biomed) is now able to develop an ISO protocol for offering out burn wound model as a service to pharmaceutical companies for pre clinical evaluation of new products. 
 
Title Flexible plasma electrode (James Walsh) 
Description We have developed a bespoke burn wound awry tool to facilitate htp wound biofilm screens and have manufactured devices and supplied them to the industry partner. 
Type Of Technology New/Improved Technique/Technology 
Year Produced 2020 
Impact None as yet, but the team are pursuing IP protection and follow-on funding. 
 
Company Name ENFOLD HEALTH LIMITED 
Description Design, combination and or assembly of DNA origami with functionalisation for targeting, disruption and or destruction of bacterial biofilms for application in humans or animals as a therapeutic or consumer care product, solely related to oral mucosal membrane uses (excluding diagnostics and sensing); 
Year Established 2022 
Impact The company has just been incorporated
 
Company Name CROMERIX LTD 
Description Involved in the development of specialist diagnostics for medical use based on the proprietary technology for which NBIC has funded Proof Of Concept Projects and FTMA awards to progress. Team us Nonlinear acoustic technique that allows improved transduction sensitivity and specificity in detection of sensor-bound microparticles. This has been successfully applied in rapid phenotypic identification of bacteria and antibiotic susceptibility, measuring DNA hybridization, and characterizing biomolecular interactions between microparticles and the sensor. 
Year Established 2021 
Impact Invited by DoH to progress projects relating to Covid detection.
 
Company Name REEPEL LTD 
Description Reepel is a vertical farming company that has a unique selling point in how it engages with the circular economy for novel fertilizers that use waste ammonia and carbon capture technology, exploiting fluidic engineering design including microbubbles for microgation and Desai Artificial Lichen (like dispersed small biofilms complexed around microbubbles) with in situ surface cleaning / removal of biofilms due to dispersed microbubbles. 
Year Established 2020 
Impact The company has won, as part of a consortium of partner companies, an InnovateUK and a BEIS grant (confidential at the moment), for UK-based R&D on the technology. It already has a demonstration in Dubai and is short-listed for facilities implementation in some Middle East sustainable cities projects.
Website https://www.reepel.co.uk/
 
Company Name Sooba Medical 
Description Research and experimental development on biotechnology 
Year Established 2020 
Impact Developing urological devices using proprietary platform technology to improve patients' care & reducing healthcare cost.
Website https://soobamedical.com/
 
Company Name Plasma4 Ltd 
Description Research and experimental development on natural sciences and engineering. 
Year Established 2021 
Impact Pending.
 
Description #BiofilmWeek 2021 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Our first biofilm awareness week took place between 16 - 22 August 2021 and promoted the economic and physical impact that biofilms have on our world and highlighted research taking place to prevent, detect, manage and engineer biofilms across our partner institutions and beyond.

A dedicated #BiofilmWeek webpage included NBIC owned tools and resources to support scientists in industry and academia to create their own content in order to showcase their research and technologies throughout the week. This webpage was viewed 1,861 times and these resources were downloaded by users a total of 6,804 times.

The engagement with the awareness week was very high, and content from participants across the world included news articles, video content, photography, art and even a poem about a biofilm. The week took place across all social media channels, but predominantly twitter, and the supporting hashtag '#BiofilmWeek' was used 420 times during this time.

Throughout the week, NBIC highlighted interesting and exciting biofilm research being undertaken across our NBIC partner research institutions by early career researchers, PhD students and our Interdisciplinary Research Fellows, in the form of 12 'Research in Focus' video interviews which were also transcribed into blogs for the NBIC website. These blogs generated 460 page views during this time.

We announced the winners of our photography competitions and launched our online Biofilm Image Gallery which has been viewed 513 times so far.

We also launched 2 initiatives with our partners at the Quadram Institute - a 'Micro Battle' card game, to communicate the importance of bacterial diversity within biofilms, and the 'Biofilm Brainhub' knowledge website, built with the support of the wider research community, which aims to be the go-to-place for anyone looking to learn about biofilms.

We also launched our Open Innovation partnering platform, hosted by Innoget, which gives industry and academic partners exclusive access to directly post technology calls and offers and generate connections and collaboration opportunities online.

1 webinar, 'Bacteria: the true rulers of your world' also took place hosted by the Royal Society of Edinburgh and the University of Edinburgh. Speakers included NBIC's Edinburgh Co-Director, Professor Cait MacPhee, and NBIC partner Professor Nicola Stanley-Wall from the University of Dundee.
Year(s) Of Engagement Activity 2021
URL https://twitter.com/ukbiofilms
 
Description #BiofilmWeek 2022 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Our second biofilm awareness week took place between 18-24 November 2022 to coincide with World Antimicrobial Awareness Week (WAAW) to highlight the relationship between Antimicrobial Resistance (AMR) and biofilms. A dedicated #BiofilmWeek webpage included NBIC owned tools and resources to support scientists in industry and academia to create their own content in order to showcase their research and technologies throughout the week.

This webpage was viewed 1,165 times and these resources were downloaded by users a total of 1,200 times.

The engagement with the awareness week was high, and content from participants across the world included news articles, video content, photography and art. The week took place across all social media channels, but predominantly twitter, and the supporting hashtag '#BiofilmWeek' was used 280 times during this time.

Throughout the week, NBIC highlighted interesting and exciting biofilm research being undertaken across our NBIC partner research institutions by early career researchers, PhD students and our Interdisciplinary Research Fellows, in the form of 7 'Research in Focus' video interviews which were also transcribed into blogs for the NBIC website. These blogs generated 150 page views during this time.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/biofilmweek/
 
Description 13th Annual Bioprocessing Summit (Veeren Chauhan, speaker and panel member) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Panel member and presentation titled Upgrading Biomanufacturing Processes with Fluorescent Nanosensors.
Year(s) Of Engagement Activity 2020
URL https://www.bioprocessingsummit.com/Manufacturing-Efficiencies
 
Description 2020 Biofilm Science and Technology Meeting. Pathways to Product Development February 4-5, 2020 Crystal City, VA. (University of Southampton, Paul Stoodley) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Oral biofilm models for testing mechanical disruption on structure and community. 2020 Biofilm Science and Technology Meeting. February 4-5, 2020 Crystal City, VA.
Year(s) Of Engagement Activity 2020
URL https://na.eventscloud.com/ehome/487930
 
Description 2022 Edinburgh Infectious Diseases Annual Symposium (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact Attended the Edinburgh Infectious Diseases Annual Symposium, 23/06/2022.
Year(s) Of Engagement Activity 2022
URL https://www.ed.ac.uk/edinburgh-infectious-diseases/news/news/together-again-2022-eid-symposium
 
Description 2nd Corrosion and Materials Degradation Web Conference, 5-7 Jul 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/corrosion-and-materials-degradation/
 
Description 2nd Global Network for Antimicrobial Resistance and Infection Prevention Symposium 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact 4 day conference (4-7 March 2019) in Kampala, Uganda, based on the theme 'Innovations Towards Combating Antimicrobial Resistance: A Whole Society Engagement'. Funding for conference awarded to Prof Tim Leighton and organised in conjunction with Makerere University (Prof Nazarius Mbona Tumwesigye).
Attended by over 140 people including the Minister of Health who requested Prof Leighton write a Kampala Declaration of AMR which was produced.
AMR will now be included in the taught programme following the conference.
Year(s) Of Engagement Activity 2019
URL http://www.southampton.ac.uk/namrip/news/2019/02/uganda-conference.page?
 
Description 4th Microbiome Movement: Skin Health & Dermatology (Katerina Steventon, speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact TITLE: Open Innovation in Skin Microbiome/Biofilms R&D: translation of academic research to address industry needs ORGANISED BY MICROBIOME MOVEMENT
Presentation took place at 2.30pm EDT / 7.30pm BST on Thursday, 5th August, a 30-minute presentation including Q&A.
Year(s) Of Engagement Activity 2021
URL https://microbiome-dermatology.com/whats-on/speakers/
 
Description 7th EuCheMS Chemistry Conference (Rasmita Raval) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact The EuCheMS Chemistry Congress is an internationally respected, large-scale event for the chemical sciences. With a theme of 'Molecular frontiers and global challenges', the scope and scale of the 2018 congress means that there will be abundant opportunities to gather information, network and develop your knowledge alongside leaders in your field.
Year(s) Of Engagement Activity 2018
URL https://www.euchems2018.org/#
 
Description 9th International Congress in Reproductive System, Yazd, Iran (Farshid Sefat, Keynote speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact The title of this speech was about investigating the effect of antimicrobial agents in female reproductive system.
Year(s) Of Engagement Activity 2021
URL https://www.en.symposia.ir/RMED09
 
Description 9th Microbiome & Probiotics R&D & Business Collaboration Forum, 3rd Skin Microbiome Congress (Katerina Steventon, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact GIVEN A TALK AT THE Microbiome & Probiotics R&D & Business Collaboration Forum ABOUT NBIC.
Year(s) Of Engagement Activity 2021
URL http://www.global-engage.com/
 
Description A Diverse Mosaic: The Facial Skin Microbiome (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact BLOG ON FACIAL SKIN MICROBIOME. Personal care impacts skin health and quality of life, an invaluable asset still often undervalued. Understanding the intricacies of skin microbiome has become a challenge for the scientific community driven by consumers' increasing demand for microbiome friendly skincare. In this blog, NBIC's Senior Innovation Consultant, Dr Katerina Steventon, discusses the importance of hydration, area-specific diversity, dysbiosis and the rising prevalence of acne during the pandemic.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/facial-skin-microbiome/
 
Description A Germ's Journey - A Fight Against Resistance (Katie Laird) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Schools
Results and Impact A Germ's Journey: A Fight against Resistance interactive educational resources to improve children's understanding of Antimicrobial Resistance. Antibiotic resistance is a worldwide problem, by 2050 many antibiotics that we rely on today will no longer be effective. One solution is increased education on the importance of appropriate use of these drugs. A key age to introduce this concept is between 7- 11 years. Concepts that children need to understand include; the importance of completing courses of antibiotics, not sharing antibiotics, the difference between a virus and bacteria and when treatment is required. Understanding the importance of these actions from a young age will help in the fight against antibiotic resistance and preserve current antibiotics for future use. "A Germ's Journey - A Fight Against Resistance" resources teach children the importance of their actions in combating antibiotic resistance in a fun and interactive way. Within the school workshops/train-the-trainer sessions (5-10) bacterial growth will be explored including biofilms and how they play a role in the development of antibiotic resistant bacteria. Pre-and-post assessments (worksheets (for children), questionnaires & focus groups (teachers)) of the increase in children's knowledge will be conducted to evaluate the impact of the resources/teaching on children's understanding of AMR.
Year(s) Of Engagement Activity 2021
 
Description A Global Biofilm Network (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact NBIC Case Study.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/global-biofilm-network/
 
Description A New Class of Acrylate Polymers (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC core partner institution in relation to research.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/a-new-class-of-acrylate-polymers-catheters/
 
Description A New Weapon Against Pseudomonas aeruginosa (Bhavik Bharochia) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/pseudomonas-aeruginosa-a-new-weapon/?utm_medium=email&_hsmi=2&_hsenc=p2AN...
 
Description A talent for bursting bubbles - Ingenia magazine article 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Michael Kenward OBE interviews Professor Leighton in this article for the Ingenia Magazine. Ingenia is a quarterly magazine that publishes articles across the whole range of engineering disciplines. Professor Leighton discusses his StarStream invention and the challenge of antimicrobial resistance.
Year(s) Of Engagement Activity 2017
URL http://www.ingenia.org.uk/Ingenia/Articles/1119
 
Description ACI SKIN MICROBIOME INDUSTRY SUMMIT (Katerina Steventon, invited speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact SPEAKER AT THE ACI CONFERENCE - THEME: Addressing the Value of Open Innovation, Translational Research and Collaborations in the Skin Care Sector
https://www.biofilms.ac.uk/aci-skin-microbiome-industry-summit/
https://www.wplgroup.com/aci/event/skin-microbiome/
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/aci-skin-microbiome-industry-summit/
 
Description AIChE Annual Meeting 2018 (Paul Stoodley) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact Co-organizer Topical Conference: Microbes at Biomedical Interfaces with Dr. Tagbo Niepa and Invited speaker and session Chair Multifunctional Biomaterials Addressing Current Healthcare Challenge. American Inst. Chem. Engs. (AIChE) Annual Meeting. Pittsburgh, PA. 10/28 - 11/2/18.
Year(s) Of Engagement Activity 2018
URL https://www.aiche.org/conferences/aiche-annual-meeting/2018/proceeding/session/plenary-session-multi...
 
Description AMR How research is tackling the challenge - Breakfast panel chaired by Stephen Metcalfe MP 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact Professor Tim Leighton and NAMRIP manager Yvonne Richardson were invited to Parliament on 13 February 2019 to an event hosted by Stephen Metcalfe MP, chair of the Parliamentary and Scientific Committee and member of House of Commons Science and Technology Committee. The panel discussion was a launch of the UK's new 20-year vision and 5-year National Action Plan (2019-2024) (the UK's previous vision, the five-year Antimicrobial Resistance Strategy ran until the end of 2018, and was in part responsible for funding the formation of NAMRIP) and the UKRI Cross-Council Initiative on AMR. The UKRI produced a booklet which featured NAMRIP as a case study for success of the UK's mission in combatting AMR.
Year(s) Of Engagement Activity 2019
URL https://www.southampton.ac.uk/namrip/news/2019/02/commons-event.page?
 
Description ASM Biofilms 2018 (Paul Stoodley, Organizing committee, Workshop Director) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Organizing committee, Workshop Director Growth and imaging techniques for laboratory and clinical biofilm research and chair session 9 ANTIBIOFILM STRATEGIES. ASM Biofilms 2018. Washington DC. Oct 7-11, 2018.
Year(s) Of Engagement Activity 2018
 
Description ASM conference on Biofilms 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Biofilms have a tremendous impact on industrial, clinical and natural environments and ASM Biofilms provides an interdisciplinary platform to discuss the latest biofilm research.
Year(s) Of Engagement Activity 2022
 
Description AWCA-ISWMCON conference 2021 (Mark Richardson, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Speaker at AWCA-ISWMCON 2021
3rd Asian Wound Care Association Conference &
23rd Annual Conference of Indian Society of Wound Management : Conference Microbes And Wound Healing
Talk Biofilms in Chronic Wounds -26/11/21
Year(s) Of Engagement Activity 2021
URL https://www.awca-iswmcon2021.com/
 
Description Accessibility Video Project - Opening our Doors to the Public 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Public/other audiences
Results and Impact The School of Life Sciences studies the molecular mechanisms underlying health, development and disease. We translate this knowledge to address global challenges. Our School is made up of a range of buildings and facilities to allow our scientists to do this work. These spaces are often inaccessible to the public. To share what happens inside, we have created a series of videos in two formats (with and without audio description) so that anyone can visit us and find out what our scientists and other staff do on a day-to-day basis. The video without audio description has the option to switch subtitles on or off.
My research was represented in this program of work by writing the script to document the scientific process involved in examining biofilm formation and providing feedback on the video.
This project is still ongoing and has not been fully launched. To accompany the videos that will be accessible via a soon to be released public facing website, will be activity sheets and lesson plans aligned with the Scottish Curriculum for Excellence.
Year(s) Of Engagement Activity 2022
URL https://discovery.dundee.ac.uk/en/publications/life-of-bacteria-over-200-degrees-celsius
 
Description Acne and the life and survival of its prominent bacteria (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Article.
Year(s) Of Engagement Activity 2019
URL https://thesecretlifeofskin.com/2019/08/21/acne-and-the-life-and-survival-of-its-prominent-bacteria/
 
Description Activity about bacteria stickiness, using dental plaque as a model (JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact Increasing awareness in biofilms in the mouth, raising knowledge level about dental health care.
Year(s) Of Engagement Activity 2019
 
Description Ada Lovelace Day 2020 - Medicine's Biggest Questions (University of Warwick, Freya Harrison) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Public/other audiences
Results and Impact I (FH) was invited to take part in a panel discussion on Medicine's Biggest Questions for Ada Lovelace Day 2020. Started in 2009, Ada Lovelace Day is an annual event that aims to increase the profile of women in STEM and, in doing so, create new role models who will encourage more girls into STEM careers and support women already working in STEM. With three colleagues from different fields and career stages, I planned and took part in a roundtable discussion on research and STEM careers, followed by a Q&A with attendees, which was broadcast live over the internet and archived on YouTube. The video of the event may be found at https://www.youtube.com/watch?v=566lgIl8Ikg. 179 viewers watched the event live and the YouTube recording has received 277 further views as at 09/02/21.
Year(s) Of Engagement Activity 2020
URL https://www.youtube.com/watch?v=566lgIl8Ikg
 
Description Address to Parliamentary and Scientific Committee on the topic of 'Science and Social Behaviour' 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact On 18 June 2018, Prof Leighton was invited to give an address to the Parliamentary and Scientific Committee on the topic of 'Science and Social Behaviour' and chose the topic of NAMRIP and its work to conduct fundamental science to address the societal problems of antimicrobial resistance and infection prevention, what it means for the future, and how understanding behaviour is key to its mission to translate the technological and medical solutions it identified to generate real societal benefit.
Year(s) Of Engagement Activity 2018
URL http://www.southampton.ac.uk/namrip/news/2018/06/parliamentary-committee.page
 
Description AkzoNobel Meeting (Eden Mannix-Fisher) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Presentation of the data from the experimental work carried out in this secondment to Pharm2Farms customer, AkzoNobel. AkzoNobel is an international customer to Pharm2Farm. The purpose was to update AkzoNobel on the outcomes of the antimicrobial testing carried out against MRSA and E. coli.
Year(s) Of Engagement Activity 2022
 
Description Algae-powered computing: scientists create reliable and renewable biological photovoltaic cell (Chris Howe) 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on the University of Cambridge website announcing the outcomes of the NBIC funding POC project 02POC19029 titled 'Algae-powered MicroProcessors'.
Year(s) Of Engagement Activity 2022
URL https://www.cam.ac.uk/research/news/scientists-create-reliable-biological-photovoltaic-cell-using-al...
 
Description American Academy of Orthopaedic Surgeons (AAOS) Educational Workshop. 2019 Annual Meeting (Paul Stoodley, speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Basic science of biofilms and its importance in orthopaedic and musculoskeletal infection. Infection in Arthroplasty: The Basic Science of Bacterial Biofilms in its Pathogenesis, Diagnosis, Treatment, and Prevention. American Academy of Orthopaedic Surgeons (AAOS) Educational Workshop. Annual Meeting. Las Vegas, Nevada. March 12-16 2019
Year(s) Of Engagement Activity 2019
URL https://www5.aaos.org/uploadedFiles/2019_FinalProgram.pdf
 
Description American Academy of Orthopaedic Surgeons (AAOS) Educational Workshop. 2020 Annual Meeting. (Paul Stoodley, speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Basic science of biofilms and its importance in orthopaedic and musculoskeletal infection. Infection in Arthroplasty: The Basic Science of Bacterial Biofilms in its Pathogenesis, Diagnosis, Treatment, and Prevention. American Academy of Orthopaedic Surgeons (AAOS) Educational Workshop. Annual Meeting. Orlando, Florida. March 23-25, 2020.
Year(s) Of Engagement Activity 2020
 
Description American Vacuum Society, Biomaterial Interfaces Division session on the 'Microbes and Fouling at Surfaces'. AVS 66th Symposium in Columbus OH. October 20-25, 2019. (University of Southampton, Paul Stoodley) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Biofilm mechanics as a mechanism for survival on surfaces from medical device to ship hulls. American Vacuum Society, Biomaterial Interfaces Division session on the 'Microbes and Fouling at Surfaces'. AVS 66th Symposium in Columbus OH. October 20-25, 2019.
Year(s) Of Engagement Activity 2019
URL https://www2.avs.org/symposium2019/
 
Description Animal Health and Space Sandpit (Jeremy Webb, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 02/12/2021
Delegates: 30
Animal Health Innovation Network (AHIN) is hosting an Animal Health and Space Sandpit on 2nd December 2021. This initiative, led jointly by the Universities of Southampton and Surrey, arose out of the Space and Animal Health workshop, held in February 2021, as part of the Hampshire and Surrey Space Hub activity; and the EM3 High Potential Opportunity (Animal Health) scoping discussions, respectively.
The aim of this sandpit is to facilitate collaboration between the Animal Health and Space Sectors to stimulate cross-disciplinary research projects. One example could be exploiting satellite data to monitor animal, human and environmental contributions to antimicrobial resistance and the impact on health.
The following themes have been identified in early discussions :
1. Theme 1: Ecosystem Health - track and monitor changes in biodiversity/supply chains and food system.
2. Theme 2: Surveillance and modelling- new threat prediction and early intervention models
3. Theme 3: technical and analytical capabilities - identifying cross-sectoral technologies or gaps in current offerings
4. Theme 4: Knowledge exchange to key stakeholders
The sandpit and networking event on 2nd December 2021 will focus on Themes 1 and 2. This would be for companies, researchers and relevant stakeholder organisations to attend and it will allow networking and provide opportunities for possible collaborations.
The attendees will include people from APHA, the Pirbright Institute, Academia and the business community.
The event is a Sandpit and follows on from several planning meetings. We aim to bring together industry, academia and other interested organisations and present some useful potential funding information to enable discussion, both during networking and in a formal session, that will kick start some potential collaborations.
Year(s) Of Engagement Activity 2021
URL https://www.eventbrite.co.uk/e/animal-health-and-space-sandpit-tickets-194398449997
 
Description Annual Conference organised by Daphne Jackson Trust (DJT) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Poster Presentation - TITLE:Targeting Pseudomonas Osteomyelitis Through Release of Quorum Sensing Inhibitors and Antibiotics From Porous Bone Granules.
Approximately 300+ esteemed academic professionals, including researchers, scientists, students, alumni, and current holders of the DJT Fellowship, gathered for a comprehensive, day-long conference exploring future career pathways, funding opportunities, and potential collaboration in STEM (Science, Technology, Engineering, Mathematics). The conference was held under the auspices of the guiding principle, "Overcoming Barriers and Making an Impact." The presented poster generated a keen interest among the diverse participants and heightened awareness of the impact of biofilm-mediated bacterial diseases.
Year(s) Of Engagement Activity 2022
URL https://daphnejackson.org/2022conference/
 
Description Annual Congress of Biotechnology - Zaragoza 2021 (Miguel Camara, Invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Date: 08/07/2021
Invited to give a talk at the biggest national conference in biotechnology in Spain organised by PhD students from across the entire country. I was part of the panel of international speakers.
Year(s) Of Engagement Activity 2021
URL https://bac.febiotec.es/programa/
 
Description Annual Wade Lecture: in conversation with Professor Sir Jonathan Van-Tam (Jeremy Webb) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 24/01/2022
Delegates: 1000
At this year's Annual Wade Lecture Professor Sir Jonathan Van-Tam MBE will be joining us in conversation with Professor Robert Read.
Sir Jonathan has played a key role in the UK's response to the ongoing COVID-19 pandemic. In this event we will discuss the future landscape of COVID-19, what the evidence has told us about pandemic preparedness, and the crucial benefits that academic and industry collaboration creates.
This online event will be hosted by Professor Diana Eccles and there will be the opportunity to ask your questions to Sir Jonathan .
Year(s) Of Engagement Activity 2022
URL https://www.eventbrite.co.uk/e/annual-wade-lecture-in-conversation-with-professor-sir-jonathan-van-t...
 
Description Antibiotic Awareness initiative at the University of Bradford (Sandra Martin) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact A public health education initiative is being planned at the University of Bradford to support the National Antibiotic Awareness week campaign, which takes place around 18th November each year. Education stands will be available in 3 areas of the University. These will be manned by undergraduate students and academics from the schools of Chemistry, Pharmacy & Medical Sciences, Microbiology and Nursing. The initiative will promote undergraduate inter-professional public engagement activities and increase the knowledge and awareness of antimicrobial stewardship and antimicrobial resistance for the students and staff who man the stands, along with students, staff, visitors and members of the public who visit the information stands. Public engagement will also include pupils from local schools and colleges visiting the STEM centre at the University. Promotional materials available on the stands will include posters, leaflets and quizzes. In addition to information stands there will be a research showcase event on Wednesday 20th November 2019. This will showcase research in the field of antimicrobial stewardship and antimicrobial resistance, including enhanced targeting of antimicrobials, which is currently being undertaken by staff and students at the University. This will increase awareness of these topics by fellow students, staff and members of the public.
Year(s) Of Engagement Activity 2019
URL https://www.bradford.ac.uk/news/archive/2019/university-highlights-antibiotic-resistance-threat.php
 
Description Antibiotic Resistance in Skin Wound Infections (Snehal Kadam) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/antibiotic-resistance-infections/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz...
 
Description Antimicrobial Resistance Interdisciplinary Research Group (Jeremy Webb, Invited panel) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Delegates: 10
Date: 20/04/2022
Invited Panel, centre renewal of the SG $43m (UK £25m) Singapore - Massachusetts Institute of Technology (MIT) Alliance for Research and Technology (SMART), and Singapore Campus for Research Excellence and Technological Enterprise (CREATE), Antimicrobial Resistance Interdisciplinary Research Group.
Year(s) Of Engagement Activity 2022
 
Description Antimicrobial Resistance in Biofilms and on Biomaterials 2021 (Jeremy Webb) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 10/06/21
Delegates: 100
The online event will bring together leaders in science, medicine and industry to discuss how antimicrobial surfaces can be used rationally to reduce the risk of antimicrobial resistance evolution and spread on medical implants and clinical surfaces.

Organizer
BEAT-AMR consortium

Scope
Biomaterials for biofilm and AMR prevention
Resistance mechanisms to antibiotics and biocides in biofilms
Antimicrobial resistance evolution in biofilms

Keynote speakers
María D. Macià, Hospital Universitario Son Espaces, Palma de Mallorca, Spain
Henk Busscher, UMCG, Groningen, The Netherlands
Vaughn Cooper, University of Pittsburgh, USA
Members of the BEAT-AMR consortium
Year(s) Of Engagement Activity 2021
URL https://www.bam.de/Content/EN/Events/2021/2021-06-10-antimicrobial-resistance.html
 
Description Antimicrobial Resistance on Biomaterials Workshop 2018 (Jeremy Webb) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact The Antimicrobial Resistance on Biomaterials Workshop

Online Archive
October 25, 2018 8:30 - 16:30

Empa, St.Gallen


The BEAT-AMR consortium
BEAT-AMR is the Partnership against Biofilm-associated Expression, Acquisition and Transmission of Antimicrobial Resistance. We are a research consortium funded under the Joint Programming Initiative on Antimicrobial Resistance (https://www.jpiamr.eu/). The consortium consists of teams from the Swiss Federal Laboratories for Materials Science and Technology (Empa), the University of Southampton, the University Medical Center Groningen, and the German Federal Institute for Materials Research and Testing (BAM).

The aim of the consortium is to understand the interplay between antimicrobial surface coatings, microbial biofilm formation, and antimicrobial resistance (AMR) evolution. Specifically, we want to determine how bacteria adapt to antimicrobials during biofilm formation on surfaces, how AMR mutations are acquired and evolve within mature biofilms, and how population dynamics within biofilms affect the transmission of AMR in multi-drug environments.

Scope and Background
The aim of the 'The Antimicrobial Resistance on Biomaterials Workshop' is to bring together leaders in science, medicine, and industry to discuss how antimicrobial surfaces can be used in a sensible way to reduce the risk of antimicrobial resistance evolution and spread on medical implants.

The one-day workshop will consist of 3 sessions in which current topics are discussed by invited keynote speakers, by members of the consortium, and by contributed talks. Each session will host speakers across the different target groups to foster interdisciplinary discussions. The sessions will be related to a specific medical indications, antimicrobial biomaterials, infectious bacteria, or antimicrobial resistance mechanisms.

Sessions
I. Resistance to Antimicrobials
II. Resistant Bacteria on Implants
III.Resistance Evolution in Biofilms

Confirmed Speakers
Academia: Alex O'Neill, University of Leeds, Sebastian Zaat, AMC, Dan Andersson, Upsalla University, Rolf Kümmerli, University of Zürich
Clinicians: Werner Albrich, KSSG
Industry: Philipp Gruner, Medicoat, Samuele Tosatti, SuSoS

Organizing/Scientific Committee
Frank Schreiber, BAM, Germany
Henny van der Mei, UMCG, Netherlands
Jeremy Webb, University of Southampton, UK
Jules Valentin, Empa, Switzerland
Matthias Buhmann, Empa, Switzerland
Qun Ren, Empa, Switzerland

Target Audience
The target audience includes microbiologists working on biofilm formation and antimicrobial resistance, material scientists developing antimicrobial biomaterials, physicians dealing with biofilm infections on implanted materials, and material companies supplying biomaterials for clinical use.
Year(s) Of Engagement Activity 2018
URL https://events.empa.ch/Veranstaltungsarchiv/2018/event.php?vnr=103-108
 
Description Approaching Skin Microbiome Innovation (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Article.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/approaching-skin-microbiome-innovation/
 
Description Asia Pacific Biofilms 2021, Third International Conference on Biofilms (Presentation: invited speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 13/05/2021
Delegates: 450
Presentation: invited speaker
3rd International Conference on Biofilms (Asia-Pacific Biofilms 2021) will be held virtually during May 11-16, 2021.
Asia-Pacific Biofilms 2021 will cover subjects including characteristics of biofilms, quorum sensing in biofilms, industrially- and clinically- relevant biofilms and emerging technologies on biofilms. In the relevant fields, distinguished scholars are invited to make presentations as the keynote speakers, and young scientists with latest research findings from various disciplines are also invited for oral presentations. This is undoubtedly the best opportunity for participants to present the recent progress and foster new collaboration. Asia-Pacific Biofilms 2021 also builds a bridge between Chinese and international universities or enterprises.
Year(s) Of Engagement Activity 2021
URL https://www.asiapacificbiofilms.org
 
Description Asia Pacific meeting for International Society of Microbial Electrochemical Technology 2021 (Eileen Yu, Plenary talk) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Prof. Eileen Yu was invited to present for the closing ceremony of the conference of 5th AP ISMET held in Harbin in July 2021 in recognition of her contribution in the area of microbial electrochemical technology.
This recognition led to more contacts from Asia Pacific area and more researchers contacted Prof. Yu requiring visiting. One PhD student from JianXi Normal University in China already arrived in the lab for a 6 month visit from December 2021.
Year(s) Of Engagement Activity 2021
 
Description August 2022 Funding Landscape: Latest Funding, Awards and Grants 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/august-2022-funding/
 
Description Australian Society for Microbiology (ASM) Biofilms Special Interest Group Annual Scientific Meeting, Hobart, Australia. 2-5 July 2017 (University of Southampton, Paul Stoodley) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact 'Biophysical properties of bacterial biofilms facilitates survival on surfaces from high velocity sprays and jets. Australian Society for Microbiology (ASM) Biofilms Special Interest Group Annual Scientific Meeting, Hobart, Australia. 2-5 July 2017.
Year(s) Of Engagement Activity 2017
 
Description B is for Biofilm (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Instagram post.
Year(s) Of Engagement Activity 2019
URL https://www.instagram.com/p/BzQ1FQYldsk/?utm_medium=share_sheet
 
Description BBSRC & MRC MyAge Network (Muscle Resilience across the life course: from cells to society) Launch Event (Jeremy Webb) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Delegates: 40
Date: 24/05/2022
The purpose of the MyAge launch event is to start shaping the Roadmap, which is the primary output expected from the network. The Roadmap will identify current gaps in the field of muscle resilience, define the key themes and challenges for future research and build the interdisciplinary teams that can deliver research leading to five more years of independent living by 2035.
Year(s) Of Engagement Activity 2022
 
Description BBSRC Impact Showcase 2021: National Biofilms Innovation Centre pushes forward biofilms research 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Article featuring NBIC published by the UKRI for their BBSRC Impact Showcase of 2021.
Year(s) Of Engagement Activity 2021
URL http://www.discover.ukri.org/bbsrc-impact-showcase-2021/index.html?_ga=2.172304737.398020265.1640088...
 
Description BBSRC Impact Showcase 2021: improving food safety, nutrition and sustainability in packaged salad (Bill Keevil) 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Article featuring research published by the UKRI for their BBSRC Impact Showcase of 2021.
Year(s) Of Engagement Activity 2021
URL http://www.discover.ukri.org/bbsrc-impact-showcase-2021/index.html?_ga=2.172304737.398020265.1640088...
 
Description BBSRC Innovate UK Biofilm research informs marine coatings design (University of Southampton, Paul Stoodley) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact BBSRC Innovate UK online news brief on the project.
Year(s) Of Engagement Activity 2019
URL https://bbsrc.ukri.org/documents/biofilm-research-informs-marine-coatings-design/
 
Description BBSRC Microbiome Meeting (2020) (University of Southampton, Jeremy Webb) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact 04/03/2020
UKRI-BBSRC are aiming to support the continuing development of Integrative Microbiome Research in the UK. As part of understanding the current and future capability needed for microbiome research, UKRI-BBSRC will run a workshop to gather advice from our community. This will inform our strategy and promote the exchange of knowledge across the sector. A detailed workshop agenda will be confirmed closer to the date, but the workshop is expected to cover areas including skills, infrastructure, and emerging research approaches. The format is expected to consist of a mixture of short presentations, followed by facilitated discussions to initially identify and then explore key issues and opportunities in greater depth.
Year(s) Of Engagement Activity 2020
URL https://bbsrc.ukri.org/news/events/2020/expression-of-interest-for-participation-in-a-ukri-bbsrc-mic...
 
Description BBSRC Microbiome Workshop 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Participation in the BBSRC Microbiome workshop leading to discussion around networks and strategic areas for funding calls
Year(s) Of Engagement Activity 2022
 
Description BBSRC Virtual Visit to Nottingham University (Miguel Camara) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Supporters
Results and Impact Representatives from BBSRC and the University of Nottingham Leadership Teams attended the event. This was an opportunity to showcase the NBIC research and training activities taking place at the Nottingham NBIC laboratories and further a field collaborators in the biofilm arena.
Year(s) Of Engagement Activity 2022
 
Description BBSRC focus group (Mark Richardson) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Other audiences
Results and Impact As part of the focus group discussion, some emerging insights from the survey findings were discussed and explored the following broad themes, including associated opportunities and challenges for BBSRC and the bioscience community:

• Adapting to change;
• BBSRC's performance, strengths and weaknesses; and
• Stakeholder engagement approaches.

A personal and NBIC perspective was provided.
Year(s) Of Engagement Activity 2022
 
Description BIG STEM Communicators Network 2021 Conference (JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Attended a UK science engagement conference, and ran a workshop there as part of the programme, on the topic of science engagement and the university curriculum.
Year(s) Of Engagement Activity 2021
URL https://www.big.uk.com/Event21
 
Description BIOFILMS ICURE SPRINT (Setsquared #40) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact NBIC offered 6 entrepreneurship training opportunities to early career researchers from partner universities with commercially promising biofilm innovations, delivered by SETsquared-the Biofilms ICURe Sprint. The programme offered the researchers and the supporting teams the opportunity to 'get out of the lab' and validate their ideas in the marketplace, via two months of full-time, intensive market assessment. The programme utilised lean start-up methodology and Strategyzer's business model canvas tools to develop a customer discovery journey and test what potential customers want in relation to the benefits the research could bring. In addition, the researchers will receive training and interview practice, carrying out over 100 interviews and acquiring transferrable business and social skills.
Year(s) Of Engagement Activity 2022
 
Description BRC Science Forum (02/07/2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact During the current pandemic, NIHR Southampton Biomedical Research Centre hold a weekly forum to discuss the latest research. Speaker: Prof Mike Grocott - BRC application update.
Year(s) Of Engagement Activity 2021
URL https://www.uhs.nhs.uk/ClinicalResearchinSouthampton/For-researchers/BRC-Science-Forum.aspx
 
Description BRC Science Forum (05/03/2021) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 05/03/2021.
Delegates: 65.
During the current pandemic, NIHR Southampton Biomedical Research Centre hold a weekly forum to discuss the latest research. Speakers:
Prof Rob Read: Infection Research Theme
Prof Mike Grocott: Perioperative and Critical Care Research Theme
Year(s) Of Engagement Activity 2021
URL https://www.uhs.nhs.uk/ClinicalResearchinSouthampton/For-researchers/BRC-Science-Forum.aspx
 
Description BRC Science Forum (09/07/2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact During the current pandemic, NIHR Southampton Biomedical Research Centre hold a weekly forum to discuss the latest research. Speaker: Prof Rob Read - Lessons from the Human Challenge Programme.
Year(s) Of Engagement Activity 2021
URL https://www.uhs.nhs.uk/ClinicalResearchinSouthampton/For-researchers/BRC-Science-Forum.aspx
 
Description BRC Science Forum (12/03/2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 12/03/2021.
Delegates: 55.
During the current pandemic, NIHR Southampton Biomedical Research Centre hold a weekly forum to discuss the latest research. Speakers:
Prof Lucy Yardley & Prof Mary Barker: Supporting Behaviour Change Research Theme
Prof Tom Wilkinson: Respiratory Research Theme
Prof Keith Godfrey: Lifecourse Nutrition, Lifestyle and Health Research Themes.
Year(s) Of Engagement Activity 2021
URL https://www.uhs.nhs.uk/ClinicalResearchinSouthampton/For-researchers/BRC-Science-Forum.aspx
 
Description BRC Science Forum (19/03/2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 19/03/21.
Delegates: 55.
During the current pandemic, NIHR Southampton Biomedical Research Centre hold a weekly forum to discuss the latest research. Speaker: Prof Graham Burdge: Harnessing transgenic technology to improve dietary intake of marine-type omega-3 fatty acids
Year(s) Of Engagement Activity 2021
URL https://www.uhs.nhs.uk/ClinicalResearchinSouthampton/For-researchers/BRC-Science-Forum.aspx
 
Description Baby Skin and the Microbiome: Common Myths (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/baby-skin-and-the-microbiome-myths/
 
Description Bacteria: the true rulers of your world (Ines Foidl, Cait MacPhee, Nicola Stanley Wall) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact As part of the Royal Society of Edinburgh programme, hosted an outreach panel discussion: 'Bacteria: the true rulers of your world'. Panellists: Cait MacPhee (Edinburgh, NBIC Co-Director), Nicola Stanley-Wall (Dundee, NBIC Co-Investigator), and Bryne Ngwenya (Edinburgh), moderated by Ines Foidl (NBIC Administrator).

This outreach event, aimed at the general public aimed to show why we think biofilms are the true leaders of everything on Earth. Through an informal panel discussion between scientists from different disciplines, and moderated by a non-scientist to stop the scientists and query responses, this was intended for a very non-scientific audience to show where we ecnouter biofilms and why they are crucial to everythig we do.

The event, other than some pre-prepared questions to start off, was based off of questions received live during the event and were answered by the scientists from the different disciplines (Physics, Molecular Biology, Geosciences).
Year(s) Of Engagement Activity 2021
URL https://www.rse-curious.com/bacteria-the-true-rulers-of-your-world/
 
Description Bacterial Biofilms are a Drag from Dental Plaque to Marine Biofouling. International Paint, Newcastle UK. 9/25/17. (University of Southampton, Paul Stoodley) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Industry/Business
Results and Impact Bacterial Biofilms are a Drag from Dental Plaque to Marine Biofouling. Talk given to R&D dept. International Paint, Newcastle UK. 9/25/17.
Year(s) Of Engagement Activity 2017
 
Description Bacterial Networks EMBO Workshop 2022 (Natalie Bamford) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Co-organiser for the EMBO workshop Bacterial Networks 2022 that was held in Spain, September 4-9th, 2022. There were 180 attendees with 23 invited speakers and 29 selected speakers. The meeting attracted a wide range of participants as evidenced by the 30 nationalities represented by the attendees.
Year(s) Of Engagement Activity 2022
URL https://meetings.embo.org/event/21-bacnet
 
Description Bacterial networks (BacNet19) - EMBO (Shi-qi An and Nicola Stanley-Wall, presentations) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Presentations. Nicola Stanley-Wall was co-organiser and presented on the topic of Molecular networks underpinning biofilm formation by Bacillus subtilis as well as running a forward looking plenary session.
Year(s) Of Engagement Activity 2020
URL https://meetings.embo.org/event/19-bac-networks
 
Description Bacteriophages: the good guys on the viral block (Ron Dixon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/phage-the-good-guys-on-the-viral-block/
 
Description Battling Bacterial Vaginosis (Ryan Kean) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/bacterial-vaginosis/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz-_UVAIw0xRRA2...
 
Description Belfry Therapeutics collaborates with the University of Nottingham in the development of quorum sensing inhibitors (Miguel Camara) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact UK-based bio-pharmaceutical company Belfry Therapeutics Ltd announced today that it will be collaborating with two leading researchers, Professor Miguel Cámara (Co-director of the National Biofilm Innovations Centre) and Dr Michael Stocks, who are based at the Centre of Biomolecular Sciences (CBS), University of Nottingham, under the MRC Proximity to Discovery: Industry Engagement Fund. The preliminary research will be focused on assessing the Company's Antibiotic-Assisted Translocation Platform (AATPTM) technology with novel inhibitors of the Pseudomonas aeruginosa quorum sensing regulator PqsR that have been developed by the CBS and which could be key to treating infections caused by this organism through attenuating virulence and sensitising biofilms to the action of existing antibiotics.
Dr Martin Quibell, co-founder and CSO, said: "The MRC Proximity to Discovery: Industry Engagement Fund aims to foster early collaborations and knowledge exchange between industry and academic researchers in the area of therapeutic innovation. We look forward to collaborating with Miguel and Michael in their preliminary work in developing an innovative approach to treat infections caused by Pseudomonas aeruginosa".
Year(s) Of Engagement Activity 2018
URL https://www.belfrytherapeutics.com/news-updates
 
Description Beyond Antibiotics Grant Programme meeting (Jeremy Webb, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 30/03/2022
Delegates: ~40
Grant project preparation meeting. Agenda items included Scene Setting & Problem Posing, End User Insight, Project planning and Translation. Speakers included Eleanor Stride (University of Oxford), Andrew Singer (UK Centre for Ecology and Hydrology), James Chan (National Spinal Injuries Unit, Bucks NHS Trust), Iain Webster (Smith & Nephew), Ben Turney (Oxford University Hospitals), Bob Yang (Royal Berkshire Hospital Reading) and Jennifer Rohn (University College London).
Year(s) Of Engagement Activity 2022
 
Description Big Ben: An Icon of Democracy and Leadership Publication 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact The History of Parliament Trust - one of the most ambitious and authoritative academic projects in British history has published a limited-edition publication entitled Big Ben: An Icon of Democracy and Leadership.The 240-page hardback book was authored by a select team of academics and industry experts. Produced in partnership by the History of Parliament Trust and publisher St James's House, the publication explores the origins and history of Big Ben and the Palace of Westminster, and celebrates the 180th anniversary and renovation of the famous clock tower as a global symbol of British democracy and leadership. The book also highlights examples of achievement and progress across the social, cultural, political, technological and commercial spheres, and offers an insight into the major UK government departments. NBIC are featured with the book as a key player in the UK research and innovation sector.
Year(s) Of Engagement Activity 2022
URL https://stjamess.org/products/big-ben-an-icon-of-democracy-and-leadership
 
Description BioProcess International US West 2020 Conference (Veeren Chauhan, speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Presentation titled AUGMENTING AUTOMATED ANALYTICS FOR CELL & GENE THERAPY MANUFACTURE.
Year(s) Of Engagement Activity 2020
URL https://informaconnect.com/cell-therapy-bioprocessing/speakers/veeren-chauhan/
 
Description Biocity - BIKC Commercialisation Meeting (Rasmita Raval) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Increasing the reputation of the University of Liverpool and the National Biofilms Innovation Centre.
Year(s) Of Engagement Activity 2018
 
Description Biocomposites Biofilm Series. Biofilm. Recorded web based interview. (Paul Stoodley) 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Interview directed to orthopedic surgeons and orthopedic manufacturing companies providing expert answers to some of the common questions surrounding the causes, impact and treatment of biofilm infections in orthopedics.
Year(s) Of Engagement Activity 2018
URL https://www.biocomposites.com/patient-zone/biofilm/
 
Description Biofilm Create! Art and Photography Competition 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on the NBIC website announcing a competition.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/biofilm-create-art-photography-competition/
 
Description Biofilm Mechanics as A Surface Survival Mechanism For Them But A Drag For Us (Paul Stoodley, invited speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact I presented to a group of graduate students (approx. 50 in person and 30 by zoom) and faculty (approx. 10 in person and 10 by zoom) on the NBIC sponsored work on developing methods to understand how biofilm viscoelasticity influences drag on ship and thus increases carbon emissions through reduced performance. Department of Chemical & Petroleum Engineering, University of Pittsburgh. 18 February 2022.
Year(s) Of Engagement Activity 2022
 
Description Biofilm Outreach: A Sneak Peek Into Past Funded Projects (JC Denis) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofilm-outreach-projects/
 
Description Biofilm Research Informs Marine Coatings Design (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC funded project.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofilm-research-marine-coatings/
 
Description Biofilm Workshop in Naples (Jeremy Webb, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Delegates: 100
Dates: 04-07/07/22
Invited speaker. This workshop was organised by M2ex-MSCA ITN European Joint Doctorate: "Exploiting metal-microbe
applications to expand the circular economy". Almost 99% of the microbial life on earth is represented by biofilms. Microbial biofilms are complex and well-organized communities of microorganisms widespread in both natural and artificial environments. Many species from several trophic groups may coexist in such microbial consortia and interact with each other through disparate antagonistic and synergistic activities. Biofilms complex functioning offers various research perspectives in different fields and generate great scientific interest due to their considerable impact on natural and human activities. Understanding the essence of such ecosystems and their functioning is hugely difficult, due to the complexity of the processes and phenomena occurring, and the multiplicity of biotic and abiotic factors involved. For these reasons, biofilm research represents a scientific challenge, which requires a synergistic cooperation among several research fields. The interdisciplinary Biofilm Workshop in Naples aims to contribute to this debate by bringing together leading researchers in theoretical and mathematical ecology, biology and microbiology, chemistry, engineering, and related fields, to address the main challenges in biofilm research.
The workshop is organized in the framework of the M2EX Doctorate program (https://m2ex-ejd.eu/) and it is planned to take place IN PERSON, although online presentations might be accommodated. On the first two days, July 4th and 5th, 3 lecture-based sections, one for each discipline Biology, Engineering and Mathematics, are planned. A training on biofilm modelling for the PhD students of the M2EX program will take place on July 5th (afternoon) and July 6th (morning). The workshop will be followed by a PhD Mini-Symposium (July 6th afternoon - July 7th) where the PhD students of the M2EX program will present their preliminary research results. On July 8th there will be a Mid-Term Meeting of the M2EX Program involving all the beneficiaries and the industrial partners.
Year(s) Of Engagement Activity 2022
 
Description Biofilm modality and the skin microbiome space (Rachel Grabenhofer) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofilm-modality-microbiome/
 
Description Biofilm, Mutants and Mass Spectrometry (Winifred Akwani) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/mass-spectronomy-biofilm/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz-_yuMwVt...
 
Description BiofilmBlitz 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact STILL ONGOING

Currently collecting 'biofilm' pictures via iNaturalist app. The iNaturalist app will serve as a scientific log.

Intention: have this observation open for 6 months, collect data, repeat annually and compare data and outcomes.
Year(s) Of Engagement Activity 2022,2023
URL https://www.inaturalist.org/projects/biofilmblitz
 
Description Biofilms 8 Conference (Jeremy Webb, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Increasing the reputation of the University of Southampton and the National Biofilms Innovation Centre. Talk title: Increased rate of mutation to antimicrobial resistance in biofilms.
Year(s) Of Engagement Activity 2018
URL https://www.rsc.org/events/detail/30904/biofilms-8-conference
 
Description Biofilms 9 Conference (Paul Stoodley, presentation; Jeremy Webb and Mark Richardson) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact From September 29 to October 1 2020, the Biofilms 9 was hosted at KIT as an online conference due to the COVID-19 pandemic. Especially regarding the situation during the pandemic, we were happy to chair a lively conference with 7 keynotes, 30 talks, 115 poster presentations, 2 live demonstrations of exhibitors and 280 participants from more than 30 countries.
Paul Stoodley presented on the topic of Using elastomeric materials to model biofilm physico-mechanical properties and the associated drag penalty.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms9.kit.edu/
 
Description Biofilms ICURe Sprint 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/biofilms-icure-sprint/
 
Description Biofilms and BioActive Fluids Workshop 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/biofilms-and-bioactive-fluids-workshop/
 
Description Biofilms and BioActive Fluids conference announcement 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/event/biofilms-and-bioactive-fluids
 
Description Biofilms and Bioactive fluids ECR workshop (Susana Direito and Xinyi Zhu) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Attended the Biofilms and Bioactive fluids ECR workshop, 31/05/22.
Year(s) Of Engagement Activity 2022
 
Description Biofilms and Microbiomes: Global Impact on Public and Ecosystem Health, 11-13 October 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on the NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/?s=Biofilms+and+Microbiomes%3A+Global+Impact+on+Public+and+Ecosystem+Heal...
 
Description Biofilms and the Skin Microbiome: A 'Hot Spot' for Personal Care (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Article.
Year(s) Of Engagement Activity 2020
URL https://www.cosmeticsandtoiletries.com/research/biology/emCosmetics--Toiletriesem-Formulary-Anti-agi...
 
Description Biofilms for Beginners (Claire Abel) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Schools
Results and Impact Understanding what biofilms are, what they do in our rivers and why they are relevant to antimicrobial resistance. Through an existing NERC-DST project NE/R003270/1 we monitored river biofilm to better understand the role of substrate in the maintenance and development of antimicrobial resistance (AMR). We are keen to communicate four key messages: 1) Biofilms provide important ecological functions in our freshwaters 2) Biofilm provides a site for exchange of resistance genes 3) Antimicrobials and ARGs in can change biofilm function and 4) Inappropriate use of antimicrobials is destructive to freshwater environments. We will compile project video footage and photographs with new material and graphics into a film with voiceover to address what biofilms are and how they can be impacted by antibiotic use - addressing the above messages. This will be adapted into two versions - one for each target audience. Complemented by additional children's activities including how to make a (pretend) play-slime-based biofilm and a downloadable biofilm-themed activity book, materials will be freely available to primary schools for the autumn term, to OWLS (http://www.owls-learn.co.uk/), through virtual presence at the Royal Highland Show and via both institutes' social media/webpages. It will also be offered as a Curious Show (Royal Society of Edinburgh) and reported to NERC/DST and Scottish Government through existing reporting.
Year(s) Of Engagement Activity 2021
 
Description Biofilms: what are they and why do we care? Global Antibiotic R&D Partnership webinar. (Freya Harrison and Mark Webber, invited speakers) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact F Harrison and M Webber were invited to give a webinar to an international audience from academic, industry and clinical sectors.
Year(s) Of Engagement Activity 2021
URL https://revive.gardp.org/biofilms-what-are-they-and-why-do-we-care/
 
Description Biological Photovoltaics and Sustainability (Maira Anam) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biological-photovoltaics-and-sustainability/?utm_medium=email&_hsmi=2&_hs...
 
Description Biomedical Science and a Passion for Skin Health (Miffy Xu) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biomedical-science-skin-health/
 
Description Board Member, Audit and Risk committee and EPSRC Value for Money committee, Rosalind Franklin Institute (Peter Smith) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Formation of a new national research institute working at the interface of life sciences and engineering.
Year(s) Of Engagement Activity 2018,2019,2020,2021
 
Description BrainHub Website (Rebecca Thompson) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact We aim to produce a website that, linked with effective public engagement activities, will improve awareness and understanding about the environments in which biofilms are found and their impact. We will highlight: specific examples where biofilms are detrimental or beneficial; the impact biofilms have in different environments (with case studies); ongoing research with a focus on QIB and NBIC research) to understand, reduce or promote biofilms and links to relevant journal articles. A pyramid style of layering information depth covering a wide range of sectors will be used to maximise audience engagement. This approach is based on previously successful interactions with the public at science festivals, where the overarching basic information is explained in an engaging way to ensure that everyone, including children, can understand while also providing opportunities for those with particular interests, to probe in greater detail into the specifics e.g. how biofilms might affect them directly and how research is helping.
Year(s) Of Engagement Activity 2021
URL https://biofilmbrainhub.co.uk/
 
Description Break Biofilms Workshop, Vienna 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact This workshop brought together experts in biofilm research covering fundamental understanding on biofilms, technologies for analyzing, detecting, and identifying biofilm formation, and next generation biocides for preventing and destroying biofilms in industrial and biomedical scenarios. This workshop was open to all (students, doctoral researchers and researchers The target audience includes early career and senior scientists working in academia and industry, who are interested in biofilm and antimicrobial research.
Year(s) Of Engagement Activity 2023
URL https://www.uni-ulm.de/nawi/iabc/
 
Description Breaking Biofilm AMR 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact NBIC Case Study.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/breaking-biofilm-amr/
 
Description Bridging the 'Gap': A UK-India wound biofilms collaboration (Joey Shepherd and Karishma S Kaushik) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/uk-india-collaboration-wound-biofilms/
 
Description Bringing biofilms to the masses (Leighann Sherry) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact The overarching aim of the event is to provide educational outreach activities to invested members of the biofilm community. The specific elements to the event is to provide a direct point of contact for delegates to meet and discuss biofilm activities with the UoG team, and to develop and understand the variety of activities that can be delivered to different age groups of the public or within educational establishments. We will purchase a sponsor stand at Eurobiofilms 2019, appropriate demonstration material, and a Barracuda display stand. A member of the team will populate the stand throughout the meeting, demonstrate activities (which may include 'Monsters in the Mouth [inset]) and materials that we have developed at a number of events (Glasgow Science Centre, Ikea, Glasgow Primary Schools). We will also purchase and demonstrate the capabilities of Foldscopes (https://www.foldscope.com/) with dental plaque. We will also data gather from delegates of other suitable activities that they are able to share. We will collect and collate this information and interact with ResearchFish and NBIC to provide free sharable educational and public engagement material for biofilm friendly people. We will also integrate new activities into our existing portfolio of outreach in Glasgow and the West.
Year(s) Of Engagement Activity 2019
URL http://eprints.gla.ac.uk/228922/
 
Description Business Engagement Pipeline Cleaning solutions 26 August 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Continuation of Edinburgh interactions. Scoping of test rig
Year(s) Of Engagement Activity 2022
 
Description Business Engagement BE-ST Scotland initial meeting 16 June 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Built Environment smarter transformation initial meeting to discuss air microbiome, green design and other roles of biofilms in the design of new built environments.
Year(s) Of Engagement Activity 2022
 
Description Business Engagement BKH Techincal services 23 August 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business Engagement BKH Techincal services 23 August 2022. Initial discussion with Brent about marine fouling consultancy services
Year(s) Of Engagement Activity 2022
 
Description Business Engagement Carisbrooke 2 August 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Initial meeting with Carisbrooke to discuss marine biofouling prediction models.
Year(s) Of Engagement Activity 2022
 
Description Business Engagement JVS products 13 October 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Discussion with Rob on continuing to work in the water sector
Year(s) Of Engagement Activity 2022
 
Description Business Engagement Nikon 4 October 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Initial meeting with Nikon to discuss innovation in their various imaging capabilities and products as well as potential academic collaborations.
Year(s) Of Engagement Activity 2022
 
Description Business Engagement Phytocutical 15 August 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business Engagement Phytocutical 15 August 2022
Year(s) Of Engagement Activity 2022
 
Description Business Engagement Rapid Innovation to talk about bacteriophage 27 July 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business Engagement Rapid Innovation to talk about bacteriophage
Year(s) Of Engagement Activity 2022
 
Description Business Engagement Termanox 11 May 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Business Engagement Termanox 11 May 2022. Discussed Termanox`s closed water cooling system disinfection technology
Year(s) Of Engagement Activity 2022
 
Description Business Engagement The Decontaminator 11 April 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business Engagement The Decontaminator 11 April 2022. Discussed the use of Zinc impregnated wraps for high touchpoint areas.
Year(s) Of Engagement Activity 2022
 
Description Business Model Workshop by Boutique Innovation (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Attended the Business Model Workshop by Boutique Innovation (25/04/22).
Year(s) Of Engagement Activity 2022
 
Description Business engagement Agri EPI centre 6 June 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business engagement Agri EPI centre 6 June 2022. Discussed collaboration and Argentina workshop
Year(s) Of Engagement Activity 2022
 
Description Business engagement Bactigon conversation 5 march 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business engagement Bactigon conversation 5 march 2022 Discussing Nottingham spinout Bactigon and how NBIC can help network.
Year(s) Of Engagement Activity 2022
 
Description Business engagement Pipeline cleaning solutions 23 May 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business engagement Pipeline cleaning solutions 23 May 2022. continuing discussions with Edinburgh
Year(s) Of Engagement Activity 2022
 
Description Business engagement Pipeline cleaning solutions 28 February 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business engagement Pipeline cleaning solutions 28 February 2022. Discussed pipelines novel cleaning solution and potential academic collaborators
Year(s) Of Engagement Activity 2022
 
Description Business engagement follow up conversation with ERS remediation 17 February 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business engagement follow up conversation with ERS remediation 17 February 2022
Year(s) Of Engagement Activity 2022
 
Description Business engagement initial conversation with JVS Products regarding water applications for their product 17 January 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Business engagement initial conversation with JVS Products regarding water applications for their product
Year(s) Of Engagement Activity 2022
 
Description Business engagement with Fujifilm diosynth biotechnologies 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Plans for future research activities.
Year(s) Of Engagement Activity 2022
 
Description Business engagement with wastewater companies 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Knowledge exchange surrounding biofilms and wastewater treatment.
Year(s) Of Engagement Activity 2022
 
Description Business engagement: regular discussions with Veolia UK 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Regular updates to discussion research activities and PhD studentship.
Year(s) Of Engagement Activity 2022
 
Description C. acnes Assist: Evolving Skin Care for Changing Needs, A Commentary. Article co-authorship. (Katerina Steventon and Mark Richardson) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact CO-AUTHORED AN ARTICLE ON C-ACNES TECHNOLOGY WITH S-BIOMEDIC, A PROMINENT START-UP IN THIS AREA, FOR THE US TRADE JOURNAL COSMETICS & TOILETRIES.
Year(s) Of Engagement Activity 2021
URL https://www.cosmeticsandtoiletries.com/research/biology/C-acnes-Assist-Evolving-Skin-Care-for-Changi...
 
Description CBE Anti-biofilm Technologies: Pathways to Product Development (Jeremy Webb) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 01/02/2022
Delegates: ~70
Year(s) Of Engagement Activity 2022
URL http://www.efaidnbmnnnibpcajpcglclefindmkaj/viewer.html?pdfurl=https%3A%2F%2Fbiofilm.montana.edu%2Fd...
 
Description CBE Biofilm Technologies Meeting (2020) (University of Southampton, Jeremy Webb) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 04-05/02/20
The Center for Biofilm Engineering is pleased to announce that its annual biofilm regulatory meeting will be held February 4-5, 2020 at the Hyatt Regency Crystal City in Arlington, Virginia.
The CBE is sponsoring this meeting for the seventh consecutive year in an effort to bring together stakeholders and agencies to discuss biofilm-related technologies, research, and regulatory pathways. Presentations will relate to products regulated by both EPA and FDA.
Year(s) Of Engagement Activity 2020
URL https://www.montana.edu/calendar/events/30832
 
Description CBE Montana Biofilm Virtual Meeting (13-15/07/2021) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Center for Biofilm Engineering is pleased to bring our 2021 Montana Biofilm Science & Technology meeting to you in a virtual format. As always, the goal of this important meeting is to bring together interdisciplinary researchers from academia and industry to discuss the latest developments in biofilm research and technology. Sessions on the biofilm matrix, medical biofilms, and industrial biofilms will convene via WebEx from 9:15 a.m. to 1 p.m. MDT July 13-15, with presentations lasting 30 to 40 minutes, including live Q&A sessions. We're also hosting a panel discussion, virtual open house, and a strategic planning meeting for our industrial associates.

The panel discussion from 1-2 p.m. Tues., July 13, will focus on the hidden potential and challenges of the biofilm matrix. This panel will explore what is known about the biofilm matrix, and what gaps exist in our understanding and how this knowledge may be used to implement better control strategies in industrial and medical contexts.

Join us from 1-3 p.m. Wed., July 14 for our virtual open house featuring posters, lab demos, and office hours with CBE faculty, researchers, and students. On Thurs., July 15 industrial members are encouraged to join us for a strategic planning meeting, where we will discuss future research directions for the CBE.
Year(s) Of Engagement Activity 2021
URL https://www.montana.edu/calendar/events/38404
 
Description CBE Pathways to Product Development Meeting (Mark Richardson, presentation) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Presented a talk called : UK perspective on biofilm regulation.
The goal of this meeting is to engage industry, academia, and federal agencies on the impact of biofilm in our daily lives. This meeting offers in-person and virtual attendance options.
Year(s) Of Engagement Activity 2022
 
Description CBS Commersilisation Workshop 2020 (Shaun Robertson) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Other audiences
Results and Impact CBS commersilisation workshop covering intellectual properties, TRLs, translating ideas to technology, confidentiality agreements, industrial commersilisation and managing meetings.
Year(s) Of Engagement Activity 2020
 
Description CF AMR Network Launch Event (Miguel Camara, Speaker) 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact The purpose of this activity was to launch the Cystic Fibrosis Network bringing together clinicians, researchers, patients and industry to discuss the areas of opportunities that this network will bring to develop novel therapeutic interventions against CF infections with a view to improve the wellbeing of patients with CF. Talk entitled: An antibody-mediated strategy to interfere with the quorum sensing regulated virulence of Pseudomonas aeruginosa in cystic fibrosis.
The aim was to promote the work carried out with VIA funding on the design of antibodies against P. aeruginosa with therapeutic and diagnostic potential with a view to estimate future collaboration with stakeholders.
The talk was given by an NBIC BITE student-Simone Lucanto also funded by VIA.
Year(s) Of Engagement Activity 2021
 
Description CHEMEXPO 2022 (Katerina Steventon) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact https://catchuk.org/chemuk-2022-expo-returns-this-may-visitor-registration-is-now-open/
Year(s) Of Engagement Activity 2022
URL https://catchuk.org/chemuk-2022-expo-returns-this-may-visitor-registration-is-now-open/
 
Description CITER research webinar: Biofilms in Health and Disease (Freya Harrison) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/biofilms-in-health-and-disease/
 
Description CMD-29, Manchester 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact CMD29 is a large international conference covering all aspects of condensed matter physics. It the 29th in the series of General conferences of the Condensed Matter Division of the European Physical Society, organised together with the Institute of Physics.
Year(s) Of Engagement Activity 2022
URL https://www.iop.org/events/cmd-29
 
Description CONFERENCE PRESENTATION TITLE: Addressing the challenges with the interference of bacterial signalling in biofilms. 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact This was a presentation given at Eurobiofilms 2019 in Glasgow. The session was on translational research and hence had a very mixed audience of academics, researchers, industrialist etc.
Year(s) Of Engagement Activity 2019
URL https://www.biofilms.ac.uk/eurobiofilms-2019-nbic-highlights/
 
Description CONFERENCE PRESENTATION TITLE: Microbiome and quorum sensing communications in skin health 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Presentation given at the SCS Formulate Conference 2019 in Coventry. There was a mixed audience mainly of companies working in skin care. A number of meetings took place during the day with different companies triggered by this presentation.
Year(s) Of Engagement Activity 2019
URL https://www.scsformulate.co.uk
 
Description CONTRIBUTION TO DSM BLOG - THE SECRET LIFE OF SKIN Quarterly review (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact CONTRIBUTION TO A BLOG ON INNOVATION IN THE SKIN MICROBIOME SPACE - WITH MULTIPLE AUTHORS
Quarterly review: Q2 2021 the future of science and innovation
The future of science and innovation in the skin microbiome from a wide range of experts in the field. 'For this edition of our quarterly review series, we are diving into the future of science and innovation within the skin microbiome. We put five key questions to a range of experts across academia and industry (scroll-down for the full list of contributors) to find out what they see as the most prominent innovation-driven trends and challenges in this rapidly developing field.'
Year(s) Of Engagement Activity 2021
URL https://thesecretlifeofskin.com/2021/05/26/quarterly-review-q2-2021/
 
Description Call for 2023 NBIC Collaborative Training Partnerships Project Proposals 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on the NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/nbic-collaborative-training-partnerships-project-proposals/
 
Description Call for Evidence: Technological Innovations and Climate Change (Geothermal Technologies) 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/technological-innovations-and-climate-change/
 
Description Call for NBIC Collaborative Training Partnerships Project Proposals 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/nbic-collaborative-training-partnerships-project-proposals/
 
Description Caol Ceilidh 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Community event featuring physics activities and a "science ceilidh", where the dances played are linked to the activities. Also featured a show and prize giving for the pupils we visited the day before.
Year(s) Of Engagement Activity 2018
 
Description Cardiff Institute for Tissue Engineering and Repair (CITER) Biofilms Workshop: "Finding Solutions for Sticky Problems" (Jeremy Webb, invited keynote speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Increasing the reputation of the University of Southampton and the National Biofilms Innovation Centre.
Year(s) Of Engagement Activity 2018
URL https://www.cardiff.ac.uk/news/view/1180790-citer-research-biofilm-workshop
 
Description Castleview Primary School club visit (J C Denis) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Help at a school club in the most deprived primary school in Edinburgh.
Year(s) Of Engagement Activity 2018
 
Description Catch UK News Blast of NBIC 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact News story published by Catch UK on NBIC.
Year(s) Of Engagement Activity 2019
 
Description Celebrating 20 years of Cosmetic (R)evolution at London College of Fashion (Katerina Steventon - panel member) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Undergraduate students
Results and Impact On 10 June 2021 The Fashion Business School hosted a series of panel talks and presentations to celebrate 20 years of Cosmetic Science at London College of Fashion. Cosmetic (R)evolution, an online summit, included an industry panel discussion, led by Gabriela Daniels featuring Dr Paul Matts, Dr Carol Treasure and Dr Katerina Steventon. Topics discussed included the future of cosmetics, biofilm innovation and the importance of digital imaging within the sector.
The kind of dialogue around the industry is that it's very multidisciplinary at the moment, and it's very early days. I'm working for the National Biofilms Innovation Centre, where I connect academia to the industry, and I am a witness to these very early discussions.
Year(s) Of Engagement Activity 2021
URL https://www.arts.ac.uk/colleges/london-college-of-fashion/stories/celebrating-20-years-of-cosmetic-r...
 
Description Cell UK 2021 Conference (Veeren Chauhan, speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Conference connecting regenerative medicine and bioprocessing experts to transform cell research and therapies.
Presentation titled Cell And Gene Therapy Analytics And Quality Control.
Year(s) Of Engagement Activity 2021
URL https://www.oxfordglobal.co.uk/cell-series-uk/
 
Description Cell-Cell Communication In Bacteria: Fundamental And Applied Aspects, 28-30 June 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/cell-cell-communication-in-bacteria/
 
Description Cell-Cell Communication conference (Miguel Camara, Organising Committee) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact This was an International conference on Cell-Cell communication in bacteria. Miguel Camara was in the Scientific organising committee and several members of the NBIC Team at Nottingham University gave poster and oral presentations.
Year(s) Of Engagement Activity 2022
URL https://microbiologysociety.org/event/society-events-and-meetings/cell-cell-communication-in-bacteri...
 
Description Center for Biofilm Engineering: 2020 Montana Biofilm Science & Technology virtual meeting (Mark Richardson) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Center for Biofilm Engineering is pleased to bring their 2020 Montana Biofilm Science & Technology meeting to you in a virtual format. The goal of this meeting is to engage interdisciplinary researchers from academia and industry with stakeholders to discuss the latest developments in biofilm research and technology. Sessions will convene on the mornings of each day, with 25-30-minute presentations to be delivered via Webex. Each presentation will feature live Q&A sessions, and the presentations, as permitted, will be archived on their member website.
Year(s) Of Engagement Activity 2020
URL https://www.montana.edu/cope/rsvp/front-end/rsvp.php?unique_id=5eda70b48a3ca5eda70b48a409
 
Description Change of plan for new Hull ice arena, local Dragon's Den green challenge. (Georgios Efthimiou) 
Form Of Engagement Activity A broadcast e.g. TV/radio/film/podcast (other than news/press)
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact BBC Radio Humberside invited speaker given the opportunity to provide listeners with further information about NBIC, the Coccus Pocus 2021 competition and the #BifoilmAware campaign.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/wp-content/uploads/2021/10/Coccus-Pocus-2021-GE-interview-NBIC-mention.mp...
 
Description China Biofilms 2019 - 2nd International Conference on Biofilms. Guangzhou, China. Oct 11-13, 2019. (University of Southampton, Paul Stoodley) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Invited keynote speaker. The role of biofilms in orthopaedic periprosthetic joint infections. China Biofilms 2019 - 2nd International Conference on Biofilms. Guangzhou, China. Oct 11-13, 2019.
Year(s) Of Engagement Activity 2019
URL http://www.chinabiofilms.org/2019#:~:text=2nd%20International%20Conference%20on%20Biofilms%20(ChinaB...
 
Description Cleaning surgical instruments and the effect of surface roughness - YouTube video 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact 3 minute video in which NAMRIP members Dr Tom Secker and Dr Illaria Corni explain the interdisciplinary approach they are taking to understand the effect of surface roughness in the cleaning process of surgical instruments.
Year(s) Of Engagement Activity 2017
URL https://www.youtube.com/watch?v=PIwh7iN0eOc&t=0s&index=14&list=PLdoU820Bg57dzlMP4hMpXCPzzG6pAXDqB
 
Description Climate Change -'Transition to Net Zero' - Parliamentary & Scientific Committee 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 05/07/2021
Delegates: 300
We have an excellent panel of speakers including :
Professor Jason A. Lowe OBE, Head of Climate Services for Government at the Met Office;
Professor Jim Skea CBE, Professor of Sustainable Energy . Imperial College London and Co-Chair of IPCC Working Group III;
Dr Alex Archibald , Associate Professor and Group Leader for the atmospheric chemistry modelling group in the Yusuf Hamied Department of Chemistry, University of Cambridge.
Professor Jason Lowe will introduce our evening's discussion setting out the current challenges posed by climate change.
Professor Jim Skea will then outline the different mitigation paths and explain how some climate change is already locked into the system.
Our next Speaker, who will also be from the Met Office, will explain how Resilience and Adaptation to the changes depends on the actions taken by other countries.
Dr Alex Archibald will conclude the presentations referencing the wider co-benefits of climate mitigation such as improved air quality and considerations beyond Net Zero.
Year(s) Of Engagement Activity 2021
URL https://www.youtube.com/watch?v=YBDw9Ftogps&t=1s
 
Description Climate Change, Dolphins and Antimicrobial Resistance - The Impact of Bubble Acoustics 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact On 18 Sept 2018 Professor Leighton gave a lecture on NAMRIP's work to a meeting of the Institute of Physics. The talk was hosted by the Institute of Physics South West Branch and held at Sarum College, 19 The Close, Salisbury.
Year(s) Of Engagement Activity 2018
URL http://www.southampton.ac.uk/namrip/news/2018/09/leighton-inst-physics.page
 
Description Coccus Pocus 2019 (Georgios Efthimiou) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact A horror sci-fi short story competition highlighting the importance of antibiotic resistance and biofilms. In an ambitious attempt to inform young people about the importance of antibiotic resistance and microbial biofilms, we will organise a horror sci-fi short story competition for this Halloween (31/10/2019), named Coccus Pocus 2019. The participants will be encouraged to write an engaging scary story, incorporating valid scientific information about AMR and biofilms. This will motivate them to read about these topics, understand the basic principles and use this information in their post-apocalyptic horror scenarios, in an educational and enjoyable way. The event can be hosted again next year (if we secure new funding) or it can be replicated by other universities, ensuring a wider outreach and a stronger impact.
Year(s) Of Engagement Activity 2019
URL https://www.biofilms.ac.uk/coccus-pocus-2019-a-microbiology-inspired-scary-story-competition/
 
Description Coccus Pocus 2020 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact A horror sci-fi short story competition highlighting the importance of antibiotic resistance and biofilms. In an ambitious attempt to inform young people about the importance of antibiotic resistance and microbial biofilms, we will organise a horror sci-fi short story competition for this Halloween. The participants will be encouraged to write an engaging scary story, incorporating valid scientific information about AMR and biofilms. This will motivate them to read about these topics, understand the basic principles and use this information in their post-apocalyptic horror scenarios, in an educational and enjoyable way.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/coccus-pocus-2020-halloween/
 
Description Coccus Pocus 2021 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Schools
Results and Impact A horror sci-fi short story competition highlighting the importance of antibiotic resistance and biofilms. In an ambitious attempt to inform young people about the importance of antibiotic resistance and microbial biofilms, we will organise a horror sci-fi short story competition for this Halloween. The participants will be encouraged to write an engaging scary story, incorporating valid scientific information about AMR and biofilms. This will motivate them to read about these topics, understand the basic principles and use this information in their post-apocalyptic horror scenarios, in an educational and enjoyable way.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/coccus-pocus-2021-halloween/
 
Description Coccus Pocus 2021 Winning Stories 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/coccus-pocus-2021-winning-stories/
 
Description Combatting Cystic Fibrosis (Declan Power) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/cystic-fibrosis/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz-8aK7Oec1PrOjpluJ...
 
Description Complex Polymicrobial Biofilms (Shaun Robertson) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/complex-polymicrobial-biofilms/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz-9...
 
Description Concluding the Oral Care Industry Appeal with CCUK (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/concluding-the-oral-care-industry-appeal-with-ccuk/
 
Description Conference participation (Central European Symposium on Antimicrobials and Antimicrobial Resistant (CESAR)) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Presentation of the data from SENBIOTAR at an antimicrobials conference in Croatia. There were around 120 participants form a wide range of academic and research institutions in Europe. There was a significant level of discussion amounts all participants around the data presented and this has resulted in the triggering of some discussions for future collaborative work.
Year(s) Of Engagement Activity 2018
URL http://hmd-cms.hr/cesar2018/
 
Description Controlling Listeria in Food Production Facilities (NBIC case study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC funded proof of concept project.
Year(s) Of Engagement Activity 2019
URL https://www.biofilms.ac.uk/controlling-listeria-in-food-production-facilities/
 
Description Craigour Park Primary School Science Fair (JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Co-designed Science Fair and Craigour Park Primary School on 13/03/2020.
Year(s) Of Engagement Activity 2020
 
Description Craigour Park Primary School interview project (Cait MacPhee and JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact School visit to P7 pupils, who had been given training to do science interviews. They interviewed our researchers and produced journal articles. The aim was to break barriers associated with science and research, while linking science with literacy.
Year(s) Of Engagement Activity 2020
URL https://blogs.ed.ac.uk/physics-astronomy/2020/09/21/interview-with-cait-macphee/
 
Description Craigour Park Primary Science Fair (University of Edinburgh, JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Contributed to a large science event to celebrate science weeks in a local promary school. We presented biofilms reserach and engaged with a large number of families.
Year(s) Of Engagement Activity 2020
 
Description Cross-institutional Networking and Profile Building online course (Shaun Robertson) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Other audiences
Results and Impact Course developed between 8 Research intensive universities in the U.K. specifically aimed at early career researchers to facilitate the participants to network with other researchers across the sector, as well as provide professional development opportunity in networking and profile building in the online environment as well as in person. It encompassed academic sectors as well as industry, business and policy. With consideration of networking for collaborations and partnerships, or sector changes for the career-flexible. Speaker on Building confidence to network and taking first steps. Attendance on 22nd & 29th April and 11 & 18th May 2021 each session was 1 h 30 minutes long.
Year(s) Of Engagement Activity 2021
 
Description Cross-institutional Networking and Profile Building online course (Shaun Robertson, speaker) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Other audiences
Results and Impact Course developed between 8 Research intensive universities in the U.K. specifically aimed at early career researchers to facilitate the participants to network with other researchers across the sector, as well as provide professional development opportunity in networking and profile building in the online environment as well as in person. It encompassed academic sectors as well as industry, business and policy. With consideration of networking for collaborations and partnerships, or sector changes for the career-flexible. Speaker on Building confidence to network and taking first steps. Date of event: 03/02/2022.
Year(s) Of Engagement Activity 2022
 
Description Daily Mail Article: How chlorinated chicken STILL has bacteria on it (Callum Highmore) 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact Interviewed for news article in the Daily Mail.
Year(s) Of Engagement Activity 2020
URL https://www.dailymail.co.uk/femail/food/article-8296365/How-chlorinated-chicken-bacteria-it.html
 
Description December 2021 Funding Landscape: Latest Funding, Awards and Grants 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofilm-funding-awards-grants/
 
Description Deodorant Innovation: Opportunities and emerging technologies (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/deodorant-innovation/
 
Description Deodorants and the Microbiome: 9 Common Myths (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/common-myths-deodorants/
 
Description Diagnosing Infection in Chronic Wounds (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC funded proof of concept project.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/diagnosing-infection-in-chronic-wounds/
 
Description Discussion with Oxford school students attending Maurice Lubbock Memorial Lecture 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Schools
Results and Impact Prior to giving the 44th annual Maurice Lubbock Memorial Lecture (the most prestigious lecture in Oxford University's engineering calendar) on 14 May 2018, Professor Timothy Leighton spent the afternoon talking to school students who had come to hear the lecture. They discussed a wide range of issues, such as careers in science and engineering, ethics, valuing co-workers, building a team, and the challenge of a multidisciplinary career. They subsequently attended the lecture.
Year(s) Of Engagement Activity 2018
URL http://www.southampton.ac.uk/namrip/publicengagment/oxford-school-may-18.page
 
Description Dispatches: demonstrating research into microbial safety of food (Callum Highmore) 
Form Of Engagement Activity A broadcast e.g. TV/radio/film/podcast (other than news/press)
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact Channel 4 commissioned an episode of Dispatches exploring the science behind the argument surrounding chlorine washed chicken following Brexit. This led to a resurgence of discussion about the topic in the media and by the general public.
Year(s) Of Engagement Activity 2019
URL https://www.channel4.com/programmes/truth-about-chlorinated-chicken-dispatches
 
Description Don't flake it: Improving scalp health (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Article.
Year(s) Of Engagement Activity 2019
URL https://www.cosmeticsbusiness.com/news/article_page/Dont_flake_it_Improving_scalp_health/156994
 
Description Don't settle. More research needs to be done on the microbiome skincare (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Blog.
Year(s) Of Engagement Activity 2019
URL https://www.cosmeticsbusiness.com/news/article_page/Dont_settle_More_research_needs_to_be_done_on_th...
 
Description Drug-free Antibacterial Technology for Medical Applications-HyMedPoly (Jeremy Webb) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Professor Jeremy Webb introduced the National Biofilms Innovation Centre to the audience, who were interested in Drug-free Antibacterial Technology for Medical Applications advances and needs in these technologies from business, clinical and research perspectives.
Year(s) Of Engagement Activity 2018
URL https://hymedpoly.eu/2018/10/29/drug-free-antibacterial-technology-for-medical-applications-14-decem...
 
Description Dundee Science Centre International Women's Day Campaign 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact The goal was to capture stories of female role models who inspired people in STEM to get into their respective fields. The role models do not necessarily need to have an obvious STEM background; it may be a family member, a teacher, a coach or anyone else. The stories provided were shared with Dundee Science Centre (DSC). The content will be a part of their campaign during International Women's Day w/c 7th March. DSC will promote some of these stories on their website, social media platforms, and in their reception area throughout March so that visitors can also be inspired. The University of Dundee will also use the materials for similar purposes.
Year(s) Of Engagement Activity 2022
URL https://discovery.dundee.ac.uk/en/activities/dundee-science-centre-international-womens-day-campaign
 
Description EBNet Webinar: "How to Engineer a Microbial Ecosystem" (Jeremy Webb) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 26/01/2021.
Delegates: 100.
In place of our Research Colloquium 2021, EBNet are hosting a series of specialist webinars to support knowledge exchange amongst members. Register now to join the EBNet webinar "How to Engineer a Microbial Ecosystem - Fundamentals of Environmental Biotech". Join Professor Tom Curtis, Newcastle University, to explore the topic and participate in the online chat.

Featuring presentations from: Professor Tom Curtis, Newcastle University - How to Engineer a Microbial Ecosystem.
Year(s) Of Engagement Activity 2021
URL https://www.eventbrite.co.uk/e/ebnet-webinar-how-to-engineer-a-microbial-ecosystem-registration-1356...
 
Description EBNet: Using big data approaches to understand microbial communities (Jeremy Webb) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 10/02/2022
Delegates: ~70
This fascinating session is brought to you by Chair(s):

Dr Sarah Forrester, the Chong Group, Dept. of Biology, University of York & Dr Bing Guo, Dept. of Civil and Environmental Engineering, University of Surrey.
Full title: "EBNet Bioinformatics Working Group: Using Big Data Approaches to Understand Microbial Communities "
Featuring:
Professor James Chong, University of York
Dr Umer Zeeshan Ijaz, University of Glasgow
Dr Sophie Nixon, University of Manchester
Prof. James Chong leads the Chong Group at the University of York and heads the EBNet Bioinformatics Working Group.
Dr Umer Zeeshan Ijaz is a Reader in Information Engineering at the University of Glasgow.
Dr Sophie Nixon is a a BBSRC David Philips and Dame Kathleen Ollerenshaw Research Fellow.
Year(s) Of Engagement Activity 2022
URL https://www.eventbrite.co.uk/e/ebnet-using-big-data-approaches-to-understand-microbial-communities-t...
 
Description EBnet webinar 6 July 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact EBnet water webinar, attended by over 70 companies and universities
Year(s) Of Engagement Activity 2022
 
Description EFB Microbial Stress meeting 2020 (Nicola Stanley-Wall, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Request to present research findings to a broad range of scientists at a conference that was switched to be online.
Increased exposure of the research undertaken by the laboratory to the international research community.
Year(s) Of Engagement Activity 2020
URL http://www.efbiotechnology.org/microbialstress/speakers
 
Description EIT Food North West (Nicola Holden) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact EIT Food NW: Partnering meeting, Iceland, 3rd-5th October 2022

EIT Food North-West teamed up with Matis, Orkidea, Iceland Ocean Cluster and Rannis to connect food businesses and scale up facilities from the UK with those in Iceland, a country renowned for sustainable and innovative food production. They hosted a 'show and tell' for SMEs, agrifood support organisations and scale-up facilities to connect and collaborate. SRUC and SAC Consulting were invited to join the event. I presented work on SRUC, the Safe and Improved Food challenge centre that I lead, and interacted specifically with those in the controlled environment agriculture sector. This included Listeria control for mushroom production. I also contributed to other sectors where there was microbiology and food safety relevance.
Year(s) Of Engagement Activity 2022
URL https://www.eitfood.eu/events/connecting-agri-tech-companies-and-scale-up-facilities-in-iceland-even...
 
Description EMBL in the UK event: Translating Discovery into Impact (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Other audiences
Results and Impact Attended the EMBL in the UK event: Translating Discovery into Impact, 30/05/22.
Year(s) Of Engagement Activity 2022
URL https://www.embl.org/about/info/alumni/blog/events/embl-in-the-uk-2022/
 
Description EPRS online roundtable on The future of pandemics (Jeremy Webb, Invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact Delegates: 200
Date: 11/05/2022
European Parliamentary Research Service Online Policy Roundtable. Invited speaker for an event on the topic of 'The future of pandemics: Preparing for health shocks in the 21st century'. My talk focused on Emerging health threats: AMR as the next pandemic.
Year(s) Of Engagement Activity 2022
URL https://www.europarl.europa.eu/thinktank/en/events/details/eprs-online-policy-roundtable-preparing-/...
 
Description EPSRC Informative workshop (Yuri Antonio Diaz Fernandez) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact EPSRC Informative workshop related to funding opportunities for ECR.
Year(s) Of Engagement Activity 2019
 
Description EURAMET News Story EMPIR project develops a new method in the fight against antibiotic resistance 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact News Story of successful outcomes of European Metrology Project MetVBadBugs looking into development of methods to study antibiotic penetration though biofilms.
Year(s) Of Engagement Activity 2020
URL https://www.euramet.org/publications-media-centre/news/news/empir-project-develops-a-new-method-in-t...
 
Description EURAMET News Story EMPIR project develops a new method in the fight against antibiotic resistance (Paulina Rakowska) 16/11/2020 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact News Story of successful outcomes of European Metrology Project MetVBadBugs looking into development of methods to study antibiotic penetration though biofilms.
Year(s) Of Engagement Activity 2020
URL https://www.euramet.org/publications-media-centre/news/news/empir-project-develops-a-new-method-in-t...
 
Description EXPERT PANEL PARTICIPANT FOR AN EVENT: University of Sheffield and Bruntwood SciTech - Alderley Park (Katerina Steventon) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact The University of Sheffield and Bruntwood SciTech- Alderley Park - An event dedicated to linking the academic partners with the industry.
So far we have 76 academic staff and students registered to dial into the event, so we are expecting a lively Q&A.
Around 50% of those registered are PhD students, at various stages of study, with many actively looking for employment or internship options. We also have a number of academic staff, looking for research collaboration and innovation opportunities.
Year(s) Of Engagement Activity 2021
 
Description Ed-SKIN network meeting February 2022 (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Other audiences
Results and Impact Attended the Edinburgh Skin Interest Network (ed-SKIN) meeting on 01/02/22.
Year(s) Of Engagement Activity 2022
 
Description Ed-SKIN network meeting November 2021 (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Other audiences
Results and Impact Attended the Edinburgh Skin Interest Network (ed-SKIN) meeting on 02/11/21.
Year(s) Of Engagement Activity 2021
 
Description Edinburgh AMR Forum seminar series (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Other audiences
Results and Impact Attended the Edinburgh AMR Forum seminar series launch on 10/11/2021.
Year(s) Of Engagement Activity 2021
 
Description Edinburgh Biofilm Tour 
Form Of Engagement Activity A broadcast e.g. TV/radio/film/podcast (other than news/press)
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Public/other audiences
Results and Impact As part of BiofilmWeek 2022, created a tour of interesting sites in Edinburgh and where on those sites you can find biofilms (Biofilms in the wild, so to say) and part of a citizen science project to encourage people in Edinburgh (or anywhere else) to recognise and find biofilms in any city.

Video currently viewed over 52 times.

Scientist involved (Gavin Melaugh) is now inlcuidng research in some of the areas encountered during the shooting of this video. Also, video planned to be duplicated in other core partner cities.

Collaboration: Gavin Melaugh, Jean-Christophe Denis
Year(s) Of Engagement Activity 2022
URL https://media.ed.ac.uk/media/1_jhlmurd9
 
Description Edinburgh Biofilms Innovation Website 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Other audiences
Results and Impact Launched as part of the BiofilmWeek 2021, we have created an Edinburgh Biofilms Innovation page, where we collate Edinburgh-specific research that involves biofilms research in the first instance. Secondly, it engaged local researchers with NBIC and the BiofilmWeek and brought to light new projects that included biofilms research.
Involved in creation: Ines Foidl, Jean-Christophe Denis, Cait MacPhee
Year(s) Of Engagement Activity 2021
URL https://www.ed.ac.uk/edinburgh-biofilms-innovation
 
Description Edinburgh Infectious Diseases Winter Lecture 2021 (Susana Direito) 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Other audiences
Results and Impact Attended the 2021 Edinburgh Infectious Diseases Winter Lecture on 16/11/2021.
Year(s) Of Engagement Activity 2021
URL https://www.ed.ac.uk/edinburgh-infectious-diseases/news/upcoming-events/edinburgh-infectious-disease...
 
Description Establishing a Biofabrication Centre (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact NBIC case study.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofabrication-centre/
 
Description Eurobiofilms 2017 (Paul Stoodley) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact Biofilm mechanics and implications for control in orthopaedic implant infections. Invited speaker session chair Mechanics and physics in and of biofilms and Biofilm Workshop Organizer. Eurobiofilms 2017. Amsterdam, Netherlands. 19 to 22 September 2017.
Year(s) Of Engagement Activity 2017
 
Description Eurobiofilms 2019 (multiple members of NBIC attended) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact NBIC provided sponsorship for the event.
NBIC Staff and researchers have engaged in presentations for academic and public engagement purposes, 197 organisation representatives were present.
This included a poster presentation from I. Douterelo: Influence of phosphate dosing to prevent plumbosolvency on biofilm formation and risk of mobilization in an experimental chlorinated Drinking Water Distribution Systems.
Year(s) Of Engagement Activity 2019
URL https://www.biofilms.ac.uk/eurobiofilms-2019-nbic-highlights/
 
Description Eurobiofilms 2022 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Eurobiofilms conference, increased awareness of the National Biofilms Innovation Centre
Year(s) Of Engagement Activity 2022
 
Description Eurobiofilms 2022, 31 August - 3 September 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/eurobiofilms-2022/
 
Description Eurobiofilms 2022: Call for Abstracts 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/eurobiofilms-2022/
 
Description Eurobiofilms Conference (Laura Barrientos Moreno) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact The 7th Eurobiofilms Conference hold in Mallorca (Spain) from 31st August to 3rd September 2022 was an international event whose purpose was to share different aspects related to biofilm research among the scientific community. More specifically, I presented a poster focus on the work I conducted as a NBIC reseach fellow. The work presented was titled "High-throughput screening for the identification of anti-biofilm compounds aganinst polymicrobial communities."
Year(s) Of Engagement Activity 2022
 
Description European Astrobiology Network Association (EANA) 2021 virtual conference (Susana Direito, organising committee) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact Part of the Portuguese Local Organising Committee and chair for one session of the European Astrobiology Network Association (EANA) 2021 virtual conference that took place on 7-10 Sep 2021. This is a very interdisciplinatry meeting where several talks on biofilms or biofilm-related topics took place, including:
Rosa Santomartino, Uni. Edinburgh - Microbial interaction with terrestrial and extraterrestrial rocks on the International Space Station.
and Marta Cortesão, German Aerospace Center (DLR) - Mold, you're indestructible! Aspergillus niger in space habitats
Year(s) Of Engagement Activity 2021
URL https://eana2021.wixsite.com/website
 
Description European Congress of Clinical Microbiology & Infectious Diseases (ECCMID) 2021 Conference (Sandra Wilks, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Invited speaker at 'Slimes Online' Biofilms expert group meeting arranged by ECCMID.
Year(s) Of Engagement Activity 2021
URL https://2021.eccmid.org/
 
Description European MIC Network - Webinar #10 Introduction to MIC research in Japan (23/02/2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 23/02/2021
Presented by VIA University College & Bundesanstalt für Materialforschung und -prüfung (BAM),
Dr. Torben L Skovhus & Dr. Andrea Koerdt.
Speaker: Satoshi Wakai (Japan Agency for Marine-Earth Science and Technology)
Year(s) Of Engagement Activity 2021
URL https://www.bam.de/Content/EN/Events/2021/2021-02-23-mic-webinars-2021.html
 
Description Exploring Microbiology 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Public/other audiences
Results and Impact We developed a creative interactive booklet for school children and members of the public that highlights the role of microbes in our world. Biofilms are represented in the content with links to dental health.
Year(s) Of Engagement Activity 2020
URL https://discovery.dundee.ac.uk/en/publications/exploring-microbiology
 
Description Exploring Novel Anti-biofilm Technology Use in New Areas (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC funded project.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/anti-biofilm-technology/
 
Description FUJIFILM Diosynth Biotechnologies - Advanced Bioprocessing of Biopharmaceuticals (or Biologics) expressed in Microbial Hosts workshop (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Industry/Business
Results and Impact Attended the FDB - Advanced Bioprocessing of Biopharmaceuticals (or Biologics) expressed in Microbial Hosts workshop on 16/11/2021.
Year(s) Of Engagement Activity 2021
 
Description FUJIFILM Diosynth Biotechnologies - Workshop 2 (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Industry/Business
Results and Impact Attended the FUJIFILM Diosynth Biotechnologies - Workshop 2 on 06/12/2021.
Year(s) Of Engagement Activity 2021
 
Description February 2022 Funding Landscape: Latest Funding, Awards and Grants 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/?s=February+2022+Funding+
 
Description Feminine health and hygiene: an exciting category with a potential for growth (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/feminine-health-and-hygiene/
 
Description Fighting back: tackling biofilms on the frontline of healthcare (Sourav Ghosh) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Research was published in The Engineer, a monthly magazine focusing on technological innovation, news and the latest developments in the engineering sector. This raised the visibility of the work within the industry.
Year(s) Of Engagement Activity 2021
URL https://www.theengineer.co.uk/content/in-depth/fighting-back-tackling-biofilms-on-the-frontline-of-h...
 
Description Finding Treatments for Eye Infections (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact Highlight the success of an NBIC funded proof of concept project.
Year(s) Of Engagement Activity 2019
URL https://www.biofilms.ac.uk/finding-treatments-for-eye-infections/
 
Description First Accelerated ICURe Programme Dedicated to Commercialising Biofilm Innovations Kicks Off 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/first-accelerated-biofilms-icure-programme/
 
Description First meeting of Biofilms Panel BSI CH/216/3 (Mark Richardson) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact The role of the panels is firstly to identify any immediate requirements for tests to support product claims that are unlikely to be filled by the current CEN 216 Work Programme - in effect a high-level gap analysis. Following this, the panels will define specific needs and work towards developing methodologies designed to meet these identified needs.
Year(s) Of Engagement Activity 2022
 
Description Fluorescent Nanosensors: Real-Time Biochemical Measurement for Cell and Gene Therapies (Veeren Chauhan) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact A news article.
Year(s) Of Engagement Activity 2020
 
Description Food Unwrapped: Chaos at the Checkout? (Callum Highmore) 
Form Of Engagement Activity A broadcast e.g. TV/radio/film/podcast (other than news/press)
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact I was invited onto the Channel 4 television show Food Unwrapped, to explain the dangers of using chlorine washes on chicken. This was to inform the public and change perception of food safety and chemical washing of food, at a time where there is a lot of misinformation being broadcast throughout the media.At the time of writing the program has not aired, but is expected to reach an audience of millions.
Year(s) Of Engagement Activity 2019
URL https://www.channel4.com/programmes/food-unwrapped/on-demand/69792-001
 
Description Forming Biofilms Within 3D Environments (Eirini Velliou) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofilms-within-3d-environments/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz-...
 
Description From Academic to Entrepreneur (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/from-academic-to-entrepreneur/
 
Description From Cradle to Grave (Katherine Fish) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact The lifecycle of water management - Wednesday 8th June 2022 - University of Greenwich, London Academic and indsutry event, with ~50 attendees, to raise the profile of water safety in healthcare settings and start to create a network with links academia, industry, and the client together where problems can be addressed collaboratively. Katherine Fish was invited to give a talk highlighting the importance of considering the upstream networks supplying the premises plumbing within healthcare settings. A report of the event was published in Waterline in November 2022, showcasing Katherine's research.
Year(s) Of Engagement Activity 2022
URL https://www.waterlinepublication.org.uk/articles/event-report-from-the-cradle-to-the-grave-the-lifec...
 
Description Funding planning meeting with UKHSA (Mark Richardson) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Third sector organisations
Results and Impact Discussion with UKHSA (previously known as PHE) to consider joint funding competitions in Phase 2 of NBIC.
Year(s) Of Engagement Activity 2022
 
Description Futures: A Festival of Discovery (Katherine Fish) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact Biofilm research outputs, images and quotes from an interview with Katherine Fish were used to showcase the world of biofilms and UK research in this area at "Futures: Festival of Discovery" in Bristol. The Futures festival is a unique public engagement collaboration between the University of Bath, Bath Spa University, University of Bristol, University of Exeter and University of Plymouth. This was an exciting opportunity to connect with the engagement team across these universities.
Year(s) Of Engagement Activity 2022
URL https://futuresnight.co.uk
 
Description GISMO: Methods to Understand and Prevent Biofilm Progression, 2 June 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/prevent-biofilm-progression/
 
Description GP2A Medicinal Chemistry Conference 2019 (Miguel Camara) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact GP2A Medicinal Chemistry Conference 2019 to disseminate new discoveries in medicinal chemistry. The primary aim of this conference to enable exchange of ideas and experience between academics, PhD student and post-doctoral researchers and industry.

Miguel Camara gave three talks:
- Discovery of novel Pseudomonas quinolone signal (pqs) antagonists for Pseudomonas aeruginosa infections
- Novel strategies to target antimicrobial resistance: Inhibition of the pqs quorum sensing system in Pseudomonas aeruginosa to attenuate virulence
- Design, Synthesis and Evaluation of Novel PqsR Inhibitors as Adjuvant Therapy to Treat Pseudomonas aeruginosa Infections
Year(s) Of Engagement Activity 2019
URL http://gp2a.org/index.php/category/gp2a2019/
 
Description Girlguiding Virtual Sleepover (Nicola Stanley-Wall, organiser) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact PEOPLE INVOLVED: A co-development between WCAIR researchers, the Girlguiding Dundee committee, and 2 senior female scientists from SLS
WHAT WAS IT? A series of activity packs released over the course of a weekend to create the feeling of a sleepover. The packs were accompanied by a series of videos, a Teams Live event, and interaction on social media, particularly using a Facebook group
KEY OUTCOMES: 1600 people from across the UK signed up to take part, and the packs received over 6000 downloads. We had an incredibly busy weekend with thousands of images uploaded onto the Facebook group, and thousands of views on our YouTube videos. Well over 1000 people also signed up to receive their badge after the event.
FUTURE PLANS: Continue our relationship with Girlguiding so that we can have an in-person sleepover in the future, and continue to use the resources developed for other projects, such as with Glasgow Science Centre.
Quote: Amazing range of activities and useful downloadable resources which we can use again. It was also a great way of introducing science to young people and to de-mystify it for them. So often it is taught in schools in such a dull way - excellent weekend!
Virtual Sleepover attendee
Year(s) Of Engagement Activity 2021
URL https://discovery.dundee.ac.uk/en/publications/girlguiding-dundeewcair-virtual-sleepover-science-cam...
 
Description Global-NAMRIP 2021 conference (presentations from Callum Highmore and Timothy Leighton) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Online event on 10/06/2021. Research was presented to an audience that spans multiple disciplines, businesses, and interests. Results were discussed as to how our research could impact and reduce the continuing global problem of antimicrobial resistance.
Year(s) Of Engagement Activity 2021
URL https://www.southampton.ac.uk/namrip/news/events/2021/06/virtualconf.page?
 
Description Global-NAMRIP attend Parliamentary AMR Reception - 25 Feb 2020 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact Three Global-NAMRIP teams showcased their research tackling AMR at a Parliamentary reception on Tuesday 25th February 2020. The event included a keynote talk by Professor Whitty, the Chief Medical Officer. The audience of over 200 people included MP's, Members of the House of Lords and parliamentary staff, researchers from all career stages and members of the public. The Global-NAMRIP teams invited to the event were: 1/Professor Timothy Leighton, Maryam Malakoutikhah and Yvonne Richardson represented Global-NAMIRP and the various research projects underway including Liquid Acoustic Stream Technology; 2/ Dr Merlin Wilcox, Professor Michael Moore, Dr Xiao-Yang Hu, Dr Bertrand Graz and Jeanne Trill talked about the various clinical trials of herbal medicine to reduce antibiotic use including the treatment of lung disease; 3/Dr Collins Sones, Dr Ioannis Katis, Dr Peijun He and Anto John demonstrated their paper-based diagnostic sensors to detect urinary tract infections.
Year(s) Of Engagement Activity 2020
URL https://www.southampton.ac.uk/namrip/news/2020/02/post-event.page?
 
Description Global-NAMRIP talk at "Tackling Antimicrobial Resistance in Food Retailers' Supply Chains: Best Practice and New Horizons" event 19 Nov 2018 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact The event celebrated the achievments of a research project tackling AMR in food retailers' poultry and pork supply chains, conducted by a team of researchers at Newcastle University and the University of Southampton, and supported by the Food Standards Agency, the Veterinary Medicines Directorate and the Economic & Social Research Council. The project report was launched at the event and provided opportunities to explore the next steps for food supply chain collaboration on AMR across three key areas of concern: evolving science and evidence needs for tackling AMR in the food industry; new challenges for addressing AMR in international supply chains; and developing a global code of practice on stewardship for tackling AMR across supply chains.
Year(s) Of Engagement Activity 2018
 
Description Global-NAMRIP talk at Department of Health & Social Care - 15 May 2019 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact On 15 May 2019 Professor Leighton gave an invited address to the Department of Health & Social Care in London on Global-NAMRIP, covering the challenges of AMR, the way various philosophies shape the policy response and Global-NAMRIP's response to the issue. This includes forming multidisciplinary teams and engaging them with end-users to identify the problems where interventions might be an effective game-changer, pursing possible interventions through rigorous research, and then engaging with translators to ensure successful interventions are validated and translated for societal benefit.
Year(s) Of Engagement Activity 2019
URL https://www.southampton.ac.uk/namrip/publicengagment/tim-dept-health.page
 
Description Global-NAMRIP talk at Oxford Music Festival 2 May 2019 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact Professor Leighton gave an invited talk on Global-NAMRIP's work to a mixed audience of academics and the public at an event during Oxford May Music Festival. The festival combines Music, Science and the Arts (2 May 2019).
Year(s) Of Engagement Activity 2019
URL https://www.southampton.ac.uk/namrip/publicengagment/tim-oxfordfestival.page
 
Description Global-NAMRIP talk to members of the Salisbury branch of the University of the Third Age (U3A) - 25 March 2019 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact Professor Leighton spoke about the role and mission of Global-NAMRIP, including his recent trip to Uganda and to Accra in Ghana in 2018. The U3A is a worldwide organisation. In the UK there are some 400,000 members. It is intended to cater for people who are no longer in full-time employment, generally because they are retired. Professor Leighton's talk to the "Spire U3A", held at Harnham Memorial Hall, was at the invitation of the Science and Technology Group (a mixed group, some do not have a background in Science or Technology, while a number have retired from the NHS, Porton Down Research Establishment, or various branches of the Military).
Year(s) Of Engagement Activity 2019
URL https://www.southampton.ac.uk/namrip/news/2019/03/u3a-talk.page?
 
Description Global-NAMRIP's Festival of Early Career Research in AMR - 26 June 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Early Career Researchers (ECR's) from a wide range of disciplines came together for Global-NAMRIP's Festival of Early Career Research in AMR, Infection Prevention and Vaccination, held at the University of Southampton Boldrewood Innovation Campus. MSc/PhD students and research fellows presented over 40 posters to a large audience of fellow students, academics, clinicians and guests from government and industry including Public Health England, the Department of Health and Social Care and GlaxoSmithKline. Many new connections were made and future collaborations discussed.
Year(s) Of Engagement Activity 2019
URL https://www.southampton.ac.uk/namrip/news/2019/06/ecr-festival.page?
 
Description HEEP Mission meeting (Katerina Steventon, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact SPEAKING ENGAGEMENT 09.50-10.05am Katerina Steventon NBIC: facilitating translational research in Biofilms
HEEP program ( https://www.leedsth.nhs.uk/assets/e1acc94afb/HEEP-Participant-Guide-LTHT-final-version-CSM-24-Sep-20-1.pdf ) that AP is co- organising together with one of the largest hospitals in Barcelona (Bcn)- Germans Trias i Pujol Hospital and NHS Leeds. The objective of this mission is to establish and strengthen (inter)national relationships between the
Key stakeholders: governmental organisations (NHSA, NIHR), hospitals (Bcn, Leeds) and the science park (AP).
https://www.leedsth.nhs.uk/assets/e1acc94afb/HEEP-Participant-Guide-LTHT-final-version-CSM-24-Sep-20-1.pdf
Year(s) Of Engagement Activity 2021
URL https://www.leedsth.nhs.uk/assets/e1acc94afb/HEEP-Participant-Guide-LTHT-final-version-CSM-24-Sep-20...
 
Description Healthy Skin Microbiome Summit 2021 (Katerina Steventon) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Curtis & Wyss Group - Healthy Skin Microbiome Summit Presentation: New Product Development Considerations to Foster Healthy Skin Microbiome: Partnering with Academia for Successful Collaboration.
The virtual event aimed to address the latest technological, scientific and commercialization trends in the industry. Our first collaboration with the Curtis & Wyss Group.
30th June 2021, 10:20 (9.20UK - tbc.) Barcelona, Spain (Virtual)
Healthy Skin Microbiome Summit
TITLE: New Product Development Considerations to Foster Healthy Skin Microbiome: Partnering with Academia for Successful Collaboration - RECORDED 28/6/21
contact: Marzhan Aliyeva, Curtis & Wyss Group
Year(s) Of Engagement Activity 2021
URL https://twitter.com/ukbiofilms/status/1409788937191804932
 
Description Hidradenitis Suppurativa: Can biofilm research support treatment? (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/hidradenitis-suppurativa-blog/
 
Description Highlights from our Marine Biofouling Webinars (William Green) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/marine-biofouling-webinar-highlights/
 
Description Highlights from the Biofilms and BioActive Fluids Workshop 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/biofilms-and-bioactive-fluids-workshop/
 
Description House of Commons Science and Technology Committee 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact Pitched to the House of Commons Science and Technology Committee, giving oral evidence on 'My Science Inquiry' . We asked the committee to undertake a programme of work to investigate how biofilm innovation currently reaches UK citiz\ens, and how a new regulatory framework could bring down barriers to market and de-risk innovation while minimising the potential for its abuse.
Year(s) Of Engagement Activity 2022
URL https://committees.parliament.uk/event/14625/formal-meeting-oral-evidence-session/
 
Description How to manage and influence the skin microbiome (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/manage-and-influence-skin-microbiome/
 
Description Hydrating the Facial Skin (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Blog.
Year(s) Of Engagement Activity 2019
URL https://thesecretlifeofskin.com/2019/02/11/hydrating-the-facial-skin/
 
Description I'm A Scientist, Stay At Home! (University of Warwick, Freya Harrison) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Schools
Results and Impact I'm a Scientist, Stay at home was a special instance of the online event I'm a Scientist, get me out of here to allow school students to stay connected with STEM during the COVID-19 lockdown. Students could log in and take part whether they were at school or at home, reconnecting with their teachers and each other. I (FH) was one of 135 scientists (academia/industry, PGRs to established researchers) in the Medical Research Zone, which was funded by the Medical Research Council with additional funding from UKRI. This involved talking to students about science, university and careers via live chats with groups from the same school, and asynchronous Q&A via the I'm A Scientist website. 1,248 students from 53 schools all over the UK logged into the Zone. 8% of active students were from widening participation schools, and 55% from underserved schools. A full reports is available at https://about.imascientist.org.uk/files/2020/08/Medical-Research-Zone-Final.pdf
Year(s) Of Engagement Activity 2020
URL https://about.imascientist.org.uk/files/2020/08/Medical-Research-Zone-Final.pdf
 
Description IADR conference Summer 2019 (Paul Stoodley, presentation) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact Development of a Model System to Investigate Oral Antibacterial Technologies
Objectives: The oral cavity is home to over 600 bacterial species which form the oral microbiome, the composition of which is associated with health and disease states. The use of active compounds in oral healthcare products can alter this microbial community. Imbalances (dysbioses) of the oral microbiome are linked to a range of oral pathologies, including dental caries and periodontal disease. Furthermore, cardiovascular disease (Leishman et al., 2010), neurodegeneration (Astafurov et al., 2014), type 2 diabetes (Long et al., 2017)and Alzheimer's disease (Shoemark and Allen, 2015)have also been linked to oral microbiome dysbiosis. To investigate the links between changes to the oral microbiome, disease and the potential for altering the microbiome through the use of active compounds, we have developed a model system utilising a Centre for Disease Control (CDC) bioreactor.
Methods: CDC bioreactors containing hydroxyapatite disks were used to produce planktonic and biofilm oral communities resembling those of healthy individuals. Bioreactors were inoculated with the pooled saliva of healthy human volunteers and the composition of the biofilms formed on the hydroxyapatite disks was determined through 16S rRNA sequencing over an 8-day time course.
Results: We identified the presence of key oral taxa including Firmicutes, Bacteroidetes, Actinobacteria, Proteobacteria and Fusobacteria. The composition of biofilms changed at each timepoint, however no significant differences were observed between independent bioreactor systems, indicating that this methodology is reproducible. In the initial 24-hour colonisation phase the pH dropped to 5.63, however this was followed by a rapid increase to a stable non-cariogenic pH of 6.70.
Conclusions: The development of this model will facilitate standardised assessment of oral healthcare products and active compounds and allow their impact on the oral microbiome to be investigated.
Division: IADR/AADR/CADR General Session
Meeting: 2019 IADR/AADR/CADR General Session (Vancouver, BC, Canada)
Year(s) Of Engagement Activity 2019
URL https://iadr.abstractarchives.com/abstract/19iags-3178849/development-of-a-model-system-to-investiga...
 
Description IBS-NBIC-SCELSE Joint Webinar 1 - Health 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact The National Biofilm Innovation Centre (NBIC) in the UK, the India Biofilms Society (IBS) in India, and the Singapore Center for Environmental Life Sciences Engineering (SCELSE) have joined hands to host a biofilm webinar series, to foster interactions between biofilm researchers in the UK, India, and Singapore that may translate into future collaborations. The theme for the first webinar is Health/Clinical.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/uk-india-singapore-health-clinical/
 
Description IBS-NBIC-SCELSE Joint Webinar 2 - Engineered Systems 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 09/02/2022
Delegates: 58
The National Biofilm Innovation Centre (NBIC) in the UK, the India Biofilms Society (IBS) in India, and the Singapore Centre for Environmental Life Sciences Engineering (SCELSE) have joined hands to host a biofilm webinar series, to foster interactions between biofilm researchers in the UK, India, and Singapore that may translate into future collaborations.
These webinars are aimed at initiating dialog between researchers in the UK, India, and Singapore, and will help identify complementing technologies and ideas for long-term partnerships. The first webinar took place in September 2021 and focused on the theme, 'Health/Clinical'. Recordings from this session are available on the NBIC website.
The second webinar in the series will focus on 'Biofilms and Engineered Systems' and will take place on Wednesday 9 February 2022.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/biofilms-engineered-systems/
 
Description ICURe Biofilm Sprint Options Roundabout 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Expert panel participation in the Biofilms ICURe sprint panel. This resulted in 5 of the 6 teams progressing to spin out from their respective universities
Year(s) Of Engagement Activity 2022
 
Description IDEAC / MICROBIOME SEMINAR (18/02/21) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 18/02/2021
Topic: Oral Microbiome & Dementia
Speakers included Dr Tanya Cerajewska
Year(s) Of Engagement Activity 2021
URL https://www.ideac.org/events
 
Description IKC Directors Group Meeting (Jeremy Webb, invited representative) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact Date: 22/11/2021
Delegates: 30
I have been invited by Engineering and Physical Sciences Research Council to represent NBIC at this meeting. Agenda items include an Economic Evaluation Presentation and Discussion on IKC sustainability plans.
Year(s) Of Engagement Activity 2021
 
Description IbioIC Annual Conference 2022 (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Attented the IbioIC Annual Conference 6-7/06/2022. Made contact with Horiba and uFraction8.
Year(s) Of Engagement Activity 2022
 
Description Improving hull management on the UK surface fleet (Karen Tait) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Discussion with the UK MoD about using this technology to improve hull management on the UK surface fleet to save fuel consumption, reduce GHG emissions and improve biosecurity status. Subject to further feasibility trials, there is potential for the MoD to adopt this technology as part of their new hull management policy which requires them to be much more aware of the condition of their hulls.
Year(s) Of Engagement Activity 2022
 
Description Improving scalp health: Industry approaches (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/dandruff-improving-scalp-health/
 
Description India Biofilms Society: Building a Community of Researchers (Snehal Kadam and Karishma S Kaushik) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/india-biofilms-society-building-a-community-of-researchers/
 
Description Industrial Partners Engagement 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Since the establishment of NBIC in December 2017, our CEO and Co-Directors from four leading universities have been actively engaging industrial partners in dialogues about what biofilms resources we have, and to discover industrial needs in biofilms research. We have invited some to be on our industrial advisory board, and others we have, or in the process of establishing, partnerships in funding PhD research. We have met with 10 companies as of 14 March 2018, they are: Smith and Nephew, GSK, Akzo Nobel, BP, Mondelez, Perfectus  Biomed, Vitacress, AB Agri, Anglian Water and 3M. Our partnership PhD with Mondelez is already in recruitment process.
Year(s) Of Engagement Activity 2017,2018
 
Description Industry lab tour for delegates from Nunano AFM tip company, UK (Peng Bao) 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact A group of two people from Nunano has visited our lab, seen the AFM facility we used in our lab, discussed the petential collaborations with us on AFM imaging in liquid. I have shown the high-resolution images of membrane protein arrays we got using our AFM and their tips. These results have surprised them and they said "this might be the best images we saw so for around UK universities."
Year(s) Of Engagement Activity 2022
 
Description Industry visitor (Peng Bao) 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Industry/Business
Results and Impact Three groups of delegates from different companies have visited our lab, and I showed our facility (Bruker multi-mode AFM) to them. And I showed them our best results, the ability of our AFM, and potential applications of our AFM and discussed with them about potential collaborations.
Year(s) Of Engagement Activity 2022,2023
 
Description Infection Prevention & Control 2019 conference (Sandra Wilks, invited keynote speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Invited keynote speaker on behalf of Nanovibronix.
Year(s) Of Engagement Activity 2019
URL http://britishinfection.org/events/infection-events/infection-prevention-conference-2019
 
Description Ingham Institute/Liverpool Hospital. Sydney Australia. 28 July 2017. Joint clinician academic lecture with Dr. Iain Gosbell. (University of Southampton, Paul Stoodley) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact Bacterial Biofilms and Chronic Infection: A Clinical and Scientific Perspective. Ingham Institute/Liverpool Hospital. Sydney Australia. 28 July 2017. Joint clinician academic lecture with Dr. Iain Gosbell. Presented to physicians and surgeons.
Year(s) Of Engagement Activity 2017
 
Description Innovate UK Fast Start: Innovation Funding Competition 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/fast-start-innovation-innovate-uk/
 
Description Innovate UK North West family meeting (Mark Richardson) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact Katerina Steventon and Mark Richardson were invited speakers at the Innovate UK regional event.
Year(s) Of Engagement Activity 2019
 
Description Innovation in Deodorants: A New Perspective (Mark Richardson) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/innovation-deodorants-new-perspective/
 
Description Innovation in Skin Microbiome Diversity (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL http://biofilms.ac.uk/innovation-in-skin-microbiome-diversity/
 
Description Innovative Wound Care (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC funded proof of concept project.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/innovative-wound-care/
 
Description Inspiring Future Scientists (Rob Hull) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Schools
Results and Impact Students were invited to the School of Biological Sciences Building to participate in exhibition and interactive games with researchers in areas of healthy and life. NBIC representative was hosting Biofilm: When Slime Gets Serious activity where participants could touch and feel a block of algae with beads concreted in. They were told that this would be biofilms in one's body in real life and how this is stronger than individual microbiomes and how this poses a challenge in drug treatment, and we need further research in such anti-microbial resistance.
Year(s) Of Engagement Activity 2018
 
Description International Biodeterioration and Biodegradation Symposium (IBBS) 18 (Mark Richardson and Jeremy Webb, Panel Members) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact During the 18th International Biodeterioration and Biodegradation Symposium a panel session was held with leading research and industry experts to discuss industrial and academic perspectives on the importance of standard biofilm test methods.
Discussions included the need for biofilm methods in the oil and gas industry, the advantages and disadvantages of a standard test method versus best practices guidelines, and how regulatory hurdles are placing constraints on biofilm technology development and innovation.
Year(s) Of Engagement Activity 2021
URL https://ibbsonline.org/biofilm-standards/
 
Description International Biofilms Markets 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/international-biofilm-markets/
 
Description International conference for pharmaceutical sciences ICPS 2021 (Fadi Soukarieh, speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact Participation in the (International conference for pharmaceutical sciences ICPS 2021), and presenting a talk titled (SENBIOTAR: Sensitising Pseudomonas aeruginosa biofilms to antibiotics and reducing virulence through novel target inhibition). The conference had over 150 participants from Academia and industry mainly from Middle east but also there were participation from USA, UK and Europe.
Year(s) Of Engagement Activity 2021
 
Description Interview for Radio 5 live (Eleanor Jameson) 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact I gave an interview on Naga Munchetty's lunch time national radio show following discussion of Christiano Ronaldo's move to Manchaster.
Year(s) Of Engagement Activity 2021
URL https://www.bbc.co.uk/programmes/m000z696
 
Description Introduction to Commercialisation Course for PhD students 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/event/commercialisation-course/?utm_medium=email&_hsmi=201049120&_hsenc=p...
 
Description Introduction to Entrepreneurship 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Introduction to Entrepreneurship programme run by Alderley Park on 11/06/2019. 16 delegates in attendance.
Year(s) Of Engagement Activity 2019
 
Description Introduction to Entrepreneurship 2020 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Introduction to Entrepreneurship programme run by Alderley Park on 13/01/2020. 7 delegates in attendance.
Year(s) Of Engagement Activity 2020
 
Description Invited Lecture: Making an Impact Week - Welcome and Accelerating Innovation through the Industrial Strategy (Rasmita Raval) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact Lecture to introduce industrial collaboration
Year(s) Of Engagement Activity 2018
URL https://www.liverpool.ac.uk/media/livacuk/researcher/documents/MaIW,2018,Report,FINAL.pdf
 
Description Invited presentation at the Big Infection Day - Developing our Interdisciplinary Infection Research (Rasmita Raval) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Invited presentation at the Big Infection Day- Developing our Interdisciplinary Infection Research, with the aim to create cross-disciplinary thinking and partnerships to combat infection. This sparked discussions and initiated collaborations across different disciplines.
Year(s) Of Engagement Activity 2018
URL https://www.evensi.uk/big-infection-day-developing-interdisciplinary-research-gallery-foresight-cent...
 
Description Invited presentation at the In The Know breakfast event on Infection and Disease (Rasmita Raval) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Industry/Business
Results and Impact Invited presentation at the In The Know breakfast event on Infection and Disease at Liverpool Science Park, 30 Mar 2017 to highlight research and innovation in the region.
A number of interactions with regional institutes and national/global industry were initiated.
Year(s) Of Engagement Activity 2017
URL https://www.linkedin.com/pulse/breakfast-event-thurs-30-march-know-liverpools-fight-matt-biagetti
 
Description Invited presentation titled: "The UK's standpoint on biofilm claims and methods in the medical devices sector" at the annual CBE Regulatory Pathways Meeting 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Invited presentation titled: "The UK's standpoint on biofilm claims and methods in the medical devices sector" given at the annual CBE Regulatory Pathways Meeting. Also, several other delegates from NBIC network attended the meeting to learn about regulatory frameworks in the USA and discuss plans for future collaborations in the area of harmonised biofilm standards and methods.
Year(s) Of Engagement Activity 2023
URL https://biofilm.montana.edu/news/article.html?id=22471
 
Description Invited presentation to SCELSE: New light on 3D biofilm heterogeneity (Bill Keevil) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Following an invitation from SCELSE for a knowledge exchange visit, on 04/07/2019 Bill Keevil presented on the topic of New light on 3D biofilm heterogeneity.
Year(s) Of Engagement Activity 2019
 
Description Invited speaker at SCS Formulate (Katerina Steventon) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Invited speaker on skin health and mental wellbeing at the SCS Formulation on the 16th November 2022 in Coventry
Year(s) Of Engagement Activity 2022
URL https://www.scsformulate.co.uk/
 
Description Invited speaker. Challenges and Opportunities in Anti-Biofilm Surface Modification, Design and Control Strategies. (Paul Stoodley) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Invited speaker. Challenges and Opportunities in Anti-Biofilm Surface Modification, Design and Control Strategies. Biomaterials Discovery Workshop. University of Nottingham, UK. 16th January 2019
Year(s) Of Engagement Activity 2019
URL https://www.nottingham.ac.uk/home/featureevents/2018/annual-biomaterials-discovery-workshop-2019.asp...
 
Description Invited speaker. Department of Orthopaedics and Traumatology, Nanfang Hospital, Southern Medical University, Guangzhou, China. Oct 14 2019. (University of Southampton, Paul Stoodley) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Invited speaker. The Role of Biofilms in Orthopedic Periprosthetic Joint Infections (PJI) Department of Southern Medical University Department of Orthopaedics and Traumatology, Nanfang Hospital, Southern Medical University, Guangzhou, China. Oct 14 2019. Presentation to orthopedic surgeons on biofilm infections.
Year(s) Of Engagement Activity 2019
 
Description Invited talk on biofilm models at CCP5 40th anniversary Conference and AGM (Rosalind Allen) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Invited talk on biofilm models at CCP5 Online conference
Year(s) Of Engagement Activity 2020
URL https://agm40.ccp5.ac.uk/
 
Description Invited talk- London Microbiome Meeting 2017 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Hosted by the Department of Twin Research at King's College London and held twice a year, the London Microbiome Meeting aim to create a forum to share research that explores the field of microbiomics, providing a broad overview to both research and methodology. It aims to develop a microbiome research network between the various research groups and institutions across London and surrounding area undertaking this work. The title of the presentation was 'Targeting quorum sensing signalling as an antimicrobial strategy' and it has resulted in further engagement activities with a company that attended the meeting.
Year(s) Of Engagement Activity 2018
URL http://londonmicrobiome.org/program.html
 
Description Joint Research Strategy Board, University of Southampton and University Hospital Southampton (Peter Smith) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Coordinating clinical, health and research activities across the University of Southampton and the University of Southampton foundation Trust.
Year(s) Of Engagement Activity 2018,2019,2020,2021
 
Description Joint Tissue and Cell Engineering Society And Physical Sciences Research Council Centres For Doctoral Training Conference 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Other audiences
Results and Impact Poster presentation. Title:Enhancing the effect of antibiotics released from HA/ß-TCP bone grafts (BG) on biofilm mediated osteomyelitis using quorum sensing inhibitors.

Over 500 scholars, students, and industry partners from various universities gathered for the annual TCES/EPSRC Doctoral Programme conference. The posters presented at the event generated significant interest among researchers and students in the field of Biomedical Science, especially those working on Tissue Engineering and Biomaterials to intervene pathological complications arising from bacterial infections. The conference also provided an opportunity for networking and potential future scientific collaboration.
Year(s) Of Engagement Activity 2022
URL https://uobevents.eventsair.com/tissue-and-cell-conference/
 
Description July 2022 Funding Landscape: Latest Funding, Awards and Grants 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/july-2022-funding/
 
Description KTN Microbiome Workshop 2018 (Mark Richardson) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact The workshop was carried out in order to engage industry from across several sectors, together with key academic/technology providers to identify what is needed to stimulate translation of microbiome research into commercial reality and ensure the UK stays competitive in this emerging area. In the workshop major industry challenges and needs: technical, regulatory, infrastructure, skills and models for collaborative work to expedite delivery of commercial solutions were explored.
Year(s) Of Engagement Activity 2018
URL https://biofilms.ac.uk/ktn-workshop-report-on-the-exploitation-of-microbiome/
 
Description KTN workshop 'Identifying and Prioritising Industrial Challenges and Potential Solutions for the Prevention, Detection, Management and Engineering of Biofilms' 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact NBIC attended a workshop organised by the Knowledge Transfer Network (KTN)
This was a one day session attended by Companies and Universities to get a common understanding of the unmet needs across a range of industrial sectors in the context of Biofilms. This ranged from Marine, Medical, Oil , Water, Personal Care, and Agriculture. NBIC representative presented the introduction of NBIC and the services we provide.
Year(s) Of Engagement Activity 2018
URL https://admin.ktn-uk.co.uk/app/uploads/2018/05/Biofilm-Workshop-Report-May2018.pdf
 
Description Key note Presentation at 17 SAMIGE Meeting in Argentina 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact This was an invited key note presentation at a the SAMIGE 17 conference. During the talk an overview of NBIC and some of the research activities taking place in in the Centre were highlighted with a particular emphasis on those taking place at Nottingham University. There was a discussion around the data presented from academics, postdoctoral researchers and PhD students.
Year(s) Of Engagement Activity 2022
URL https://samige.org.ar
 
Description Kinlochleven Music & Physics Party (JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact With over 300 attendees, a fantastic response from the local community, new partnerships created, and the validation of an innovative way to conduct community events, this project is a massive success. We met most of our objectives and plan to develop this project further, in this region of Scotland.
Year(s) Of Engagement Activity 2018
URL https://www.facebook.com/events/183817788942484/
 
Description Labroots' Microbiology Virtual Week, 6-8 September 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on the NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/labroots-microbiology-virtual-week/
 
Description Launch event: Additive Biofabrication Facility at the Biodiscovery Institute University of Nottingham (Miguel Camara) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Industry/Business
Results and Impact The activity was the Launch Event for the new Additive Biofabrication Facility located in the Nottingham Biodiscovery Institute at Nottingham University Sponsored by the UoN Interdisciplinary Research Cluster (IRC) in Additive Biofabrication.
Year(s) Of Engagement Activity 2022
URL https://www.nottingham.ac.uk/research/research-areas/additive-biofabrication/index.aspx
 
Description Launch of the National Biofilm Innovation Centre, The Royal Society London (NBIC CEO and Co-directors) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact Official launch of the £26M National Biofilm Innovation Centre (NBIC), The Royal Society London, November 2017, as part of the the award of the BBSRC IKC and Government's Industry Strategy.
NBIC was launched to restructure Biofilms research and innovation in the UK and will drive a national agenda to this effect. It is led by the 4 co-leads:
Prof J Webb (U of Southampton); Prof R Raval (U of Liverpool), M. Camara (U of Nottingham) and C. MacPhee (U of Edinburgh) who represent a multi- and inter-disciplinary team.
Year(s) Of Engagement Activity 2017
URL https://www.nottingham.ac.uk/news/pressreleases/2017/november/nottingham-scientists-help-launch-nati...
 
Description Launch of the Singapore National Biofilm Consortium next pahse 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Presented the work of the National Biofilms Innovation Centre at the launch of the Singapore National Biofilm Consortium (SNBC)
Year(s) Of Engagement Activity 2022
URL https://www.snbc.sg/
 
Description Life Science in the central Southampton launch 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Industry/Business
Results and Impact Launch of the Life Sciences Narrative, leading to awareness of the National Biofilms Innovation Centre and further discussion.
Year(s) Of Engagement Activity 2022
 
Description Liverpool Enterprise Partnership Innovation Board June 2018 (Rasmita Raval, presentation) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Other audiences
Results and Impact Presentation (13/06/2018) on translation of research to innovation to the Liverpool Enterprise Partnership Innovation Board. A number of follow-on interactions resulted.
Year(s) Of Engagement Activity 2018
 
Description Living in the Extreme (Susana Direito, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Invited scientist for a Native Scientist, the Native Schools project takes scientists to schools to talk about science with the pupils.
Year(s) Of Engagement Activity 2019
 
Description Living with hydrogen - Microbial influence on hydrogen storage webinar (Miguel Camara) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Webinar to stimulate collaborations between academia and industrial partners interested in hydrogen storage as a source of energy.
Year(s) Of Engagement Activity 2022
URL https://www.linkedin.com/events/livingonhydrogen-microbialinflu6778253700247949313/
 
Description Living with hydrogen - Microbial influence on hydrogen storage. Webinar (Miguel Camara) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Webinar to stimulate collaborations between academia and industrial partners interested in hydrogen storage as a source of energy.
Year(s) Of Engagement Activity 2021
URL https://www.linkedin.com/events/livingonhydrogen-microbialinflu6778253700247949313/
 
Description MEDILINK EAST MIDLANDS WEBINAR: Infectious Diseases Special Interest Group (Katerina Steventon, Speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Medilink East Midlands SiG meeting held on 23rd Sept 2021, with the theme for the meeting being 'The Microbiome: Emerging and Innovative Technologies'.
Recent advances in microbiome research have highlighted the significant influence these microbial populations have on our wellbeing. The upcoming SIG will be focussing on this rapidly accelerating field, looking at the role of the microbiome in human health and how imbalances lead to disease. It will also look at the application of emerging technologies that can be used to better understand the microbiome, and the development of new therapeutic approaches for associated diseases.

TITLE: Open Innovation in Biofilms R&D: Translation of Academic Research to Address Industry Needs

This event is in partnership with De Montfort University and led by Dr Katie Laird, Professor of Microbiology and also Head of the Infectious Disease Research Group at De Montfort University.
Year(s) Of Engagement Activity 2021
URL https://www.medilinkem.com/event/webinar-infectious-diseases-special-interest-group-the-microbiome-e...
 
Description Magnificent Microbes 2018 (Nicola Stanley-Wall) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Schools
Results and Impact The public engagement aims of the School of Life Sciences are to:
1. Build on our creative partnerships to deliver a high quality, innovative engagement programme.
2. Engage a range of people with our research.
3. Collaborate with our local communities to meet their needs and widen our reach.
4. Promote and support a culture of active participation in public engagement within our life sciences community. This includes students, research and non-research staff.
Magnificent Microbes is a 2-day event with the objective of helping school pupils, teachers and the public to learn about the wide and varied role of microbes in our world and the research taking place at the School of Life Sciences at the University of Dundee. There is a significant component of microbiology within the Scottish school curriculum. Prior to the event participating teachers take part in a microbiology-theme CPD (Continued Professional Development) session and are able to take a Microbiology Resource Box back to the classroom with them in order to explore the topic further with their pupils.
During the two day event researchers and students from the Division of Molecular Microbiology facilitated interactive activities at 'stands' in the Dundee Science Centre - the first day welcomed over 180 P6 and P7 school pupils, while the second saw over 450 members of the public. These stands touched on topics like antibiotic resistance, the human microbiome and biofilm formation.
Professor Nicola Stanley-Wall was represented in this programme of work by and interactive stand that highlights the form and function of bacterial biofilms. The children are invited to build their own biofilm and to try and blast it away. This allows discussions about chronic infections and the need to brush teeth daily.
Following the event, the schools were offered an in class visit and support from researchers. This was to guide the in-class learning and curriculum enhancement. The programme of events culminated with a visit by the teachers and pupils from the participating schools to the School of Life Sciences to share their learning with their peers from other schools and with participating scientists.
Evaluation was undertaken through collecting comments from the children and marking the development of teachers' confidence and knowledge base. Feedback from pupils and public showed an increased knowledge of the uses of microbes in our everyday life for example in food and energy production. There was also more varied and positive association of terms linked with the topic "microbes" coupled with improved hygiene practice as a result of the activities they undertook at the Dundee Science Centre facilitated by researchers from the School of Life Sciences.
Year(s) Of Engagement Activity 2018
URL https://www.dundee.ac.uk/news/2018/university-scientists-aim-to-inspire-with-celebration-of-life-in-...
 
Description Magnificent Microbes 2020 (Nicola Stanley-Wall and Natalie Bamford) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Schools
Results and Impact Magnificent Microbes is a 2-day event focused on helping school pupils, teachers and the public learn about the wide and varied role of microbes in our world and the research taking place at the University of Dundee School of Life Sciences. Prior to the event participating teachers take part in a microbiology-theme CPD (Continued Professional Development) session and are able to take a Microbiology Resource Box back to the classroom with them in order to explore the topic further with their pupils.
During the two day event researchers and students from the Division of Molecular Microbiology facilitated interactive activities at 'stands' in the Dundee Science Centre - the first day welcomed over 150 P6 and P7 school pupils, while the second saw over 500 members of the public. These stands touched on topics like antibiotic resistance, the human microbiome and biofilm formation.
My research was represented in this program of work by inclusion of an interactive stand that highlighted what biofilms are and the role of the matrix. We also developed a craft activity for younger children that highlighted the diversity of microbes in the environment.
Feedback from pupils and public showed an increased knowledge of the uses of microbes in our everyday life for example in food and energy production. There was also more varied and positive association of terms linked with the topic microbes coupled with improved hygiene practice because of the activities they undertook at the centre.
Year(s) Of Engagement Activity 2020
URL https://discovery.dundee.ac.uk/en/activities/magnificent-microbes-2020
 
Description Magnificent Microbes 2022 (Natalie Bamford) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact In previous years we have run this as two in-person days at Dundee Science Centre, but with the uncertainties around COVID-19 still rampant we opted for doing things a little differently this year and used the opportunity to expand what we can offer to schools. We had five participating classes from two Dundee area schools. They received a full week's worth of fun and hands-on science activities centred around the world of microbes, complete with a packed resource box full of materials and lots of chances to interact with our scientists through video and text chats. This took place the week of April 25th-29th, 2022, with materials and lesson plans delivered to schools the week before. About 150 pupils ages 10-12 were involved. The teachers said that it was well received with high levels of engagement among their students. Teachers requested to keep all materials for future use and these requests were granted.
Year(s) Of Engagement Activity 2022
URL https://blog.dundee.ac.uk/one-dundee/magnificent-microbes/
 
Description Managing Air in the Built Environment: Creating Benefits for Human Health and Wellbeing (Angela Sherry) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/air-in-the-built-environment/
 
Description Marine Anti-Fouling: a force for environmental good and commercial opportunity (William Green) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/marine-anti-fouling/
 
Description Marketing video recording with Virustatic Ltd (Farshid Sefat) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact Virustatic Ltd attended University of Bradford laboratory and recorded marketing video which will be released in their website and social media channels and we predict to have great impact on international audience.
Year(s) Of Engagement Activity 2022
 
Description Mass Vaccination: The Bradford Story (Dinesh Saralaya and Faiz Ilyas, speakers) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact To celebrate European Antibiotic Awareness Day on 18 November and in honour of the Professor Kevin Kerr Memorial Lecture, we have two speakers who will give different perspectives on vaccination in the Bradford area.

European Antibiotic Awareness Day promotes public awareness about antimicrobial resistance. Antimicrobial resistance is a global health and development threat. Antibiotic resistance can be reduced by using antibiotics sensibly when patients have bacterial infections, and preventing infection by measures such as infection control and vaccinations. The World Health Organization (WHO) estimates that vaccines save two to three million lives each year (excluding Covid-19).

Each speaker will share their personal experiences, followed by a panel Q&A session.

Speaker 1: Dr Dinesh Saralaya: Consultant Respiratory Physician, Associate Medical Director at Bradford Teaching Hospitals NHS Foundation Trust and Associate Director for Research at the Bradford Institute for Health Research. He is also Honorary Visiting Professor at the University of Bradford and Honorary Senior Lecturer at University of Leeds. Dr Saralaya will describe the theory behind vaccination, public health benefits, and local experiences of running mass vaccination campaigns in Bradford.

Speaker 2: Mr Faiz Ilyas: Student Survey Support Officer at the University of Bradford, Ilyas Cars Director, Councillor for Clayton Parish Council, and Clayton and Fairweather Green Labour Branch Youth Officer. Faiz has recently won an award for promoting vaccination for difficult-to-reach communities. Faiz will share his experiences of promoting vaccination in these communities.
Year(s) Of Engagement Activity 2021
URL https://www.scienceandmediamuseum.org.uk/whats-on/cafe-scientifique
 
Description May 2022 Funding Landscape: Latest Funding, Awards and Grants 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/?s=May+2022+Funding+Landscape
 
Description MedTech Market Access (Peter Smith) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Online course over 6 weeks for education researchers and businesses on the process of taking a product idea through to deployment within the health and care system. 150 attendees from 17 countries - organised and funded by the UoS Institute for Life Sciences. Run with input from collaborators in Leeds and Birmingham.
Year(s) Of Engagement Activity 2021
URL https://www.southampton.ac.uk/life-sciences/news/2021/05/5-market-access-for-medtech-online-course.p...
 
Description Meet DASA event (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Other audiences
Results and Impact Attended the Meet DASA event on 27/01/2022.
Year(s) Of Engagement Activity 2022
URL https://w2.irm.ed.ac.uk/DL-DASA-Jan2022
 
Description Meeting with Simon Chater, FCDO LATAM 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact Miguel Camara and Paulina Rakowska met with Simon Chater (Head of Science and Innovation, FCDO LATAM (UK Embassy in Buenos Aires)) and gave an overview on the outcomes from the "Biofilms in Agriculture" and the 3 key priority areas identified by the workshop participants, addressing key unmet needs in agriculture and drawing on synergism between the two countries. A draft of the white paper (based on the outcome from the workshop discussions) was requested by Simon to aid his further discussions with UK and Argentina funders on the 'Biofilm in Agriculture' initiative.
Year(s) Of Engagement Activity 2023
 
Description MicroBattle - Strategy Card Game (Rebecca Thompson) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact The aim of the 'MicroBattle' project is to develop a strategy-based card game with accompanying online materials that communicates the importance of bacterial diversity within biofilms beyond their context as pathogens. The project will also highlight the role of biofilms in ecological niche occupation by symbionts, archaea and other organisms. Character artwork for specific microbes will be heavily stylised to make the game fun and engaging, while at the same time translating the canonical biology into easy-to-understand images. Using exemplar microbes and particular game mechanics will allow core microbiological concepts to be introduced and demonstrated, such as the role of biofilm formation in increasing bacterial resistance to antibiotics and environmental stressors. Twitter, Instagram and YouTube will be used to gain feedback from potential users, e.g. on the illustrations, and to showcase game development through demonstration. Small webtoons (budget-dependent) will be illustrated to communicate single concepts in an appealing way. Social media will also allow us to monitor reach, outcomes and impact. Whilst the game can be printed off for public use and widely distributed by NBIC and QIB as free downloads, a physical product will also be demonstrated online and at targeted live public engagement events.
Year(s) Of Engagement Activity 2020
 
Description Microbe Zone Activity Book (Nicola Stanley-Wall, creator) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact A large-scale physical exhibit, the microbe zone features prominently in Dundee Science Centre's brand-new exhibition space. It presents a rich variety of microbe images. Scientists at the University of Dundee, alongside collaborators at other Scottish institutions, contributed images of microbes to highlight their research. Short descriptions accompany the images to empower our audiences to explore the wonderful world of microbiology. The images in the exhibit include images of biofilms that were taken by researchers of all career stages.

To go alongside the Images of Microbiology booklet we generated an activity book with elements of the content. We have designed it to be suitable for most ages. To disseminate both the book at activity book we worked with the Library and Learning Centre to self-publish the material to 'Discovery', the University's key research repository. This platform allows tracking of the number and country of downloads.

Almost 30k people have visited Dundee Science Centre since the installation of the Microbe Zone, providing the opportunity to reach many people. Staff at the Centre have observed and spoken to visitors at the Zone. Their feedback stated that interest in the Zone is mostly positive, and discussions are often related to current experience of science in the news. They have been downloaded over 1,100 and 250 times respectively from people based in over 45 countries globally.
Year(s) Of Engagement Activity 2021
URL https://discovery.dundee.ac.uk/ws/portalfiles/portal/58789023
 
Description Microbes Week on Dundee Science Centre Home Learning Programme 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Schools
Results and Impact Dundee Science Centre launched a Home Learning Digital Programme in collaboration with the University of Dundee (dentistry, forensic science and life sciences) and others in response to a national need for STEM Learning resources for parents and children who suddenly found themselves home schooling. The University of Dundee was approached to support tackling equity and wellbeing in some of the most disadvantaged areas of our region.

Each week (Monday to Friday) had a new theme and they invite participants to complete the activities in order or to jump in and out as they please. There are hands on activities that are easy to complete at home with no complicated equipment required and straightforward easy to follow instructions.

My research was represented in this program of work. My team and I created content for a week about microbes for the programme. There is a range of fun activities including a scavenger hunt, yeast races, biofilm hunts, creative challenges and games, children will discover a variety of microbes, from harmful to helpful, how they work and what they do. Topics covered research that takes place in the Division of Molecular Microbiology and the Wellcome Centre for Anti-Infectives Research. We also generated a booklet for parents and teachers to use alike.

Our Science@Home kits were also designed and provided the same activities as the home learning digital programme, with the necessary equipment and guides, but without the need for digital resource. For 10 weeks, 350 children received kits alongside their foodbank deliveries, giving families a real boost and some science learning in the process. We will share this story through the voices of the people involved. The viewer will discover the positive, meaningful impacts from these initiatives for our partner's and local community and families. Importantly, we now have a model to sustain our engagement beyond a direct response to COVID-19.

A number of local organisations have come together in partnership to support this project. This includes The Gate Church International, Dundee City Council Education department, University of Dundee and Dundee Bairns.

Project partners include Dundee Science Centre (initiative leads), University of Dundee (Leverhulme Research Centre for Forensic Science, Dundee Dental School, School of Life Sciences, Wellcome Centre for Anti-Infectives Research) Gate Church Wellbeing Project, Dundee City Council, Dundee Bairns, ChildSmile.
Year(s) Of Engagement Activity 2020
URL https://discovery.dundee.ac.uk/en/activities/microbes-week-on-dundee-science-centre-home-learning-pr...
 
Description Microbial Impacts Conference 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact Date: 03/12/21
Delegates: 65
The ability to manage and control the activities of microbes presents enormous opportunities and challenges and is now a focus of considerable interdisciplinary research and innovation strengths regionally.
This networking event aims to:
Connect and accelerate new collaborations across the life sciences, physical sciences, medicine and engineering disciplines in order to set new directions and technology development relevant to microbes and microbial communities.
Catalyse discussion, exchange of ideas, and new collaborations addressing global challenges relevant to the field,
Build on research and innovation strengths regionally*.
*(Wessex and South Coast region).
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/microbial-impacts/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz-_aqBjtk3kBxf57...
 
Description Microbial communities: current approaches and open challenges, 10-14 October 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/microbial-communities-current-approaches-and-open-challenges/
 
Description Microbiology Lessons in the classroom 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Input to primary school microbiology lessons provided for a year group. Provided printed materials and physical resources to the teacher including agar plates, microscope and books. Also provided support to teacher in enhancing knowledge of content.
Year(s) Of Engagement Activity 2022
URL https://discovery.dundee.ac.uk/en/activities/microbiology-lessons-in-the-classroom
 
Description Microbiology Society Annual Conference 2017 (Paul Stoodley, invited speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Distribution and structure of biofilms in clinical specimens - a paradox emerging. Invited talk.
Edinburgh, UK. 3 - 6 April 2017
Year(s) Of Engagement Activity 2017
URL https://microbiologysociety.org/event/annual-conference/annual-conference-2017.html
 
Description Microbiology Society Annual Conference 2021 (Kim Hardie and Dean Walsh) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Kim Hardie as attendee and supervisor of a PGR student who presented (Dean Walsh).
Year(s) Of Engagement Activity 2021
URL https://microbiologysociety.org/event/full-events-listing/annual-conference-online-2021.html
 
Description Microbiology Society Annual Conference 2022 (Jeremy Webb, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Delegates: ~200
Date: 04/04/2022
Invited speaker. Annual Conference features an extensive programme designed to cover the breadth of microbiology, as well as professional development sessions, social activities and plenty of networking opportunities.
Year(s) Of Engagement Activity 2022
URL https://microbiologysociety.org/event/annual-conference/annual-conference-2022.html
 
Description Microbiology Society focus group on AMR (Jeremy Webb) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact The focus group, chaired by Professor Stephen Baker, will be an opportunity to discuss the role of microbiological research in tackling antimicrobial resistance and, in particular, what more could be done if there were fewer barriers and the interventions needed to take this forward.

The discussions will then provide the basis of a Microbiology Society report and a set of recommendations about the ways microbiology can contribute to achieve a more Sustainable Future. The report and the underpinning evidence will be used to engage and inform decision makers involved in sustainability debates in the UK and the Republic of Ireland.
Year(s) Of Engagement Activity 2020
URL https://microbiologysociety.org/blog/a-sustainable-future-online-focus-groups.html
 
Description Microbiology Virtual Week 2020 (Jo Slater-Jefferies) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Microbiology Virtual Week 2020 will offer a 3-day content-rich program offering invited lectures, thought-provoking discussions and posters to explore global developments for the prevention, diagnosis, and treatment of Infectious Diseases, discoveries in Microbiology & Immunology research to improve human, animal, and plant health, including virology, pathogenesis, genomics and epidemiology, microbial communities and biofilms, and research to find improved vaccines, diagnostics, and antiviral drugs for Influenza.
Year(s) Of Engagement Activity 2020
URL https://www.labroots.com/virtual-event/microbiology-immunology-2020
 
Description Microbiome Connect: Europe, 6-7 July 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/microbiome-connect-europe/
 
Description Microbiome-targeted skincare (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/microbiome-targeted-skincare/
 
Description Mind the lab 2018 (JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact A one-day STEM awareness campaign at Haymarket train station, Edinburgh.
Year(s) Of Engagement Activity 2018
 
Description Mind the lab 2019 (JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact A one-day STEM awareness campaign at Haymarket train station, Edinburgh.
Year(s) Of Engagement Activity 2019
 
Description Models for the study of acne' for the Soft Matter and Functional Interfaces Centre for Doctoral Training (SOFI CDT) 2020 (invited speaker, Susana Direito) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Invited lectures on 'Models for the study of acne' for the Soft Matter and Functional Interfaces Centre for Doctoral Training (SOFI CDT) Case Study 4 'Develop a Topical
Hydrogel Formulation for the Treatment of Acne' on 10/12/2020.
Year(s) Of Engagement Activity 2020
 
Description Models for the study of acne' for the Soft Matter and Functional Interfaces Centre for Doctoral Training (SOFI CDT) 2021 (invited speaker, Susana Direito) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Invited lectures on 'Models for the study of acne' for the Soft Matter and Functional Interfaces Centre for Doctoral Training (SOFI CDT) Case Study 4 'Develop a Topical
Hydrogel Formulation for the Treatment of Acne' on 10/12/2021.
Year(s) Of Engagement Activity 2021
 
Description Moderator at the International Federation of Societies of Cosmetic Chemists (IFSCC) congress (Katerina Steventon) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Moderated session 6A of the programme on behalf of the IFSCC (London 19 - 22 September 2022). This brought awareness and highlighted credibility.
Year(s) Of Engagement Activity 2022
URL https://www.ifscc2022.com/programme/
 
Description Molecular Microbe-Host Interactions (Shi-qi An) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/microbe-host-interactions/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz--rfC1-...
 
Description Moving Mucus Battles Biofilms (Katie Horton) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Patients, carers and/or patient groups
Results and Impact I want to collaborate with Animate Your Science to create a simple infographic to improve understanding of respiratory physiology in health and disease and to raise awareness of biofilm infections in PCD, CF and COPD. 'Moving Mucus', or lack thereof, will be used to explain how the lung 'Battles Biofilms'. Content will be guided by patients and their families to ensure that we address important questions, give meaningful answers and tailor it appropriately to a lay audience. Suggested topics thus far include: • What is the mucociliary escalator? • What diseases cause the mucociliary escalator to not work properly? • What is a biofilm infection and why is it bad? • How can we prevent and treat biofilm infection? • What research needs to be done? Main aims are to: • Educate about respiratory physiology in health and disease • Increase awareness of biofilms • Emphasise the importance of physiotherapy and medication adherence to reduce chances or persistence of infection • Get people actively engaging in research (answering surveys, providing samples e.t.c.) This resource will be used for: • Meet the Scientist • Pint of Science • PCD Live • New Forest and Hampshire County Show • The Brilliant Club tutorial sessions • Promotion on Twitter
Year(s) Of Engagement Activity 2021
 
Description N8 Research Partnership Advocates Event 2018 (Rasmita Raval, presentation) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Increasing the reputation of the University of Liverpool and the National Biofilms Innovation Centre.
Year(s) Of Engagement Activity 2018
 
Description NAMRIP Exhibit at 2017 Science & Engineering Day 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact Around 7000 visitors visited the University of Southampton Science & Engineering Day on 18th March 2017. Professor Tim Leighton (and his team), in collaboration with the Winchester Science Centre, exhibited one of the games from 'The most dangerous game in the world' at the event. The team met with members of the public raising awareness of the issue of AMR.
Year(s) Of Engagement Activity 2017
 
Description NAMRIP exhibit at Biological Science Outreach Festival, University of Southampton 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Industry/Business
Results and Impact NAMRIP's 'Most Dangerous Game in the World' featured at the School of Biological Sciences Outreach Festival on Wednesday 7th November. Part of Robert Hull's popular Biofilms stand 'When Slime gets Serious', the exhibit generated lots of interest with great feedback from the attendees which included industry sponsors, local school teachers and academic colleagues. The festival also attracted students studying Science Communication who were inspired to write blogs about the various activities.The festival was organised by the Committee for Outreach & Research Engagement (CORE) to showcase the various public engagement activities within the School and inspire attendees to get involved in Outreach.
Year(s) Of Engagement Activity 2018
URL http://www.southampton.ac.uk/namrip/news/2018/11/outreach-festival.page
 
Description NAMRIP exhibit at Pop-up Science Centre 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact Dr Sandra Wilks, in collaboration with Winchester Science Centre, displayed the NAMRIP exhibit at a pop-up Science Centre in West Quay Shopping Centre on 19th March. Sandra spoken to members of the public, raising awareness of the issue of AMR.
Year(s) Of Engagement Activity 2017
 
Description NAMRIP exhibit at West Quay Shopping Centre 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact The NAMRIP exhibit 'The most dangerous game in the world' was taken to West Quay Shopping Centre in Southampton as part of the Winchester Science Centre pop-up Science exhibition on 17 March 2018. NAMRIP volunteers spoke to members of the public about the issue of AMR and how NAMRIP are tackling the issue.
Year(s) Of Engagement Activity 2018
 
Description NAMRIP talk at 'Clinicians meet Engineers' event at University Hospital Southampton 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact On 9 November 2018, Professor Leighton gave a talk on NAMRIP at an event chaired by Professor Salim Khakoo entitled "Clinicians meet Engineers" at the University Hospital Southampton. The event was organised under the auspices of the MRC Confidence in Concept grant, an annual rolling grant won in part to replace the NAMRIP pump priming projects originally funded by EPSRC.
Year(s) Of Engagement Activity 2018
URL https://www.southampton.ac.uk/namrip/news/2018/11/clinicians-engineers.page?
 
Description NAMRIP's 'Most Dangerous Game in World' at Southampton's Science & Engineering Day 16 March 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact As part of the University of Southampton's Science and Engineering Day, the full 6 piece NAMRIP exhibit attracted large numbers of visitors throughout the day. While NAMRIP volunteers spoke to adults about the issue of Antimicrobial Resistance (AMR) and the research underway at Southampton to tackle this issue, children played the various games around the AMR theme with great enthusiasm, often returning several times to play the games again. Winchester Science Centre, where the exhibit is on permanent display, transported the exhibit to Southampton for the day. The Science and Engineering Day, an annual event, took place on Saturday 16th March and was attended by over 7000 visitors of all ages and a variety of backgrounds.
Year(s) Of Engagement Activity 2019
URL https://www.southampton.ac.uk/namrip/news/2019/03/sotsef.page?
 
Description NAMRIP's Summer Sandpit with BRC, NBIC & CIC 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Supporters
Results and Impact Together with representatives from 3 research councils, over 45 NAMRIP members attended the event at Chilworth Manor Hotel on 5 July 2018. It was an opportunity for members to make new collaborations, understand the expertise within AMR research that exists within the network and discuss ideas for future projects.
Year(s) Of Engagement Activity 2018
URL https://www.southampton.ac.uk/namrip/news/2018/07/5-namrip-sandpit.page?
 
Description NBIC - BioActive Fluids Group conference - Biofilms and BioActive Fluids (Cait MacPhee, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Delegates: 60
Dates: 06-08/06/22
A joint conference between NBIC and the BioActive fluids group
There are major societal health challenges associated with bacterial infection and ultimately the emergence of anti-microbial resistance fomented in biofilms. The aim of this workshop is to
1. Showcase research by academics and industry
2. Increase understanding of the applied challenges
3. Develop new collaborations between academic and industrial partners
The workshop is a joint venture between the BioActive Fluids group (formerly known as UK Fluids Network | Bioactive Fluids SIG) and the National Biofilms Innovation Centre NBIC | Harnessing the UK's Academic & Industrial Strength in Biofilms and is supported by EP/S033211/1 Shape, shear, search & strife; mathematical models of bacteria (ukri.org).
Year(s) Of Engagement Activity 2022
URL https://sites.google.com/view/biofilms-and-bioactive-fluids/home
 
Description NBIC BITE-DTP course 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Postgraduate students and postdoctoral researches from Liverpool, Southampton and Nottingham attended to a 1 week course training on Biofilms. Postgraduates were between their 1st and 4th year and from different background fields such as: Microbiology, Molecular biology, Chemistry, Biology and Biomedical sciences. The course evolved in complexity smoothly to allow the attendees to understand the basis of biofilms. This was especially helpful to those early in their PhD as well as those coming from a different background. They worked in groups to address a real life case study, that was pitched at the end of the course by the different groups. A prize was given to the group that best approached treating a biofilm infection.
Year(s) Of Engagement Activity 2022
 
Description NBIC Biofilm Create Photography and Art Competition 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact We launched the competition in July 2022 as part of our #BiofilmAware campaign, which works to raise awareness of NBIC and its research, and the many societal and economic impacts of biofilms. The competition had two categories: photography and art, and was a great opportunity for members of the public, budding artists and photographers to explore biofilms in their everyday environments and is also a chance for scientists to look at creative ways of showcasing their cutting-edge research. Amazon gift cards were awarded to first (£500), second (£250) and third place (£125) in both categories. We received 60 entries for NBIC Biofilm Create Photography and Art Competition. 31 in the art category and 29 in the photography category. All of the entries from the photography category were added to the Biofilm Image Gallery on our website and we used all of the entries from the art category to create a new Biofilm Art Gallery on our website.

The competition web page received 1,756 views, the winners announcement received 20 views, the Biofilm Image Gallery received 2,678 views and the Biofilm Art Gallery received 183 views.
Year(s) Of Engagement Activity 2021,2022
URL https://www.biofilms.ac.uk/biofilm-create-competition-2022-winners/
 
Description NBIC Biofilm Management Workshop 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact 25/02/20
Delegates: 65
This workshop was aimed at exploring unmet industrial needs in the field of Biofilm Management. NBIC partner organisations shared their unmet needs and the 65 attendees (34 from industry) worked in syndicates to discuss the key challenges and ways to overcome them. The resultant report is available to download here: https://www.biofilms.ac.uk/biofilm-management-report-now-available-for-download/
Background
This will be an essential session for anyone in an industrial or academic setting with an interest in killing and /or removing established biofilms or in controlling them via exploiting their life cycle dynamics. This could be across multiple sectors- for example from marine biofouling to wound infection and dental plaque to industrial cleaning / hygiene control. This could involve multiple a range of scientific fields from the study of biofilm dynamics and laboratory model development to targeted interventions via novel physical, chemical or biological means.
This event is open to all commercial/industrial concerns with an interest in the subject and to UK academics whose institution is currently, or plans to be, a member of NBIC. There will be an initial plenary session led by NBIC summarising and discussing an outline scope of the needs, followed by cross industry / academia group sessions, and an opportunity for short pitches of ideas or problems
Outputs will be
New connections and new collaboration Opportunities
Additions to our evolving NBIC map of the Biofilm Scientific / needs landscape
Agreed priorities and opportunities for translational projects and Research Investment to influence funders and drive NBIC activities.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/biofilm-management-report-now-available-for-download/
 
Description NBIC Biofilm Prevention Workshop 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact Date: 24/11/21
Delegates: 59
Our Biofilm Prevention Workshop took place on Wednesday 24 November 2021 in Birmingham. This workshop provided a unique forum for accelerating academic-industry partnerships to allow prevent-based research approaches to be translated into innovation across multiple sectors. An initial plenary session was led by NBIC to summarise and discuss an outline scope of the needs, followed by cross industry/academia group sessions, and an opportunity for short pitches of ideas or problems.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofilm-prevention-workshop/?utm_medium=email&_hsmi=194767935&_hsenc=p2AN...
 
Description NBIC Biofilm Standards and Regulatory Needs - Industry Feedback Session 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Date: 17/01/22
Delegates: 17
There are a lack of standard biofilm models and standardised measurement / test methods. NBIC and CBE as part of the IBSTG has reached the consensus that Our national and international academic-industry road-mapping has consistently identified the establishment of global standards in biofilms as a priority need.[ref to NBIC reports] Availability of standards would facilitate translational innovation and stimulate business growth by allowing industries to make claims for their products and support global societal, environmental and healthcare challenges.The main objective of this US-UK partnership is to address the need for standardization in biofilm field and to bring together complementary expertise (academic, industrial, metrology, standardization and regulatory). We initially aim to hold a workshop focused on one sector / area and have chosen health.
Objective
The purpose of this first workshop is to understand the needs and current status in this sector considering both Medical Devices and Pharma and establish industry and regulatory participation in a forward task /working group. In parallel CBE and NBIC (and the IBSTG) will pursue approaches to establishing a Joint programme in biofilm standardisation and prenormative activities informed by the outputs of this meeting with the goal of progressing to normative activities and international standardisation.
Year(s) Of Engagement Activity 2022
 
Description NBIC Biofilms Photography Competition (2021) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact Our two national NBIC photo competitions which formed part of our #BiofilmAware campaign ran from January through to 31 May 2021. 'Biofilms in Real Life' received 53 entries and 'Biofilms in the Lab' received 42. A diverse panel of 6 judges took into account creativity, originality, composition, imagination used, scientific value and the overall artistic impression and Amazon gift cards were awarded to first, second and third place in both competitions. During the competition run, the competition webpage received 4,865 views and our news item received 536 views. The #BiofilmIRL hashtag was used 94 times, and the #BiofilmsInTheLab hashtag 84 times.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofilm-photo-competitions/
 
Description NBIC Biofilms Road-mapping 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Consultant and NBIC Staff travelled to UK academic partners or held online-meetings (total 15 institution and 80 academics involved) to develop knowledge based roadmap.
Year(s) Of Engagement Activity 2019
 
Description NBIC Blog Page (April - June 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 122 page views, ranked 30th highest page on the NBIC site.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/blog/
 
Description NBIC Blog Page (January - March 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 130 page views, ranked 33rd highest page on the NBIC site.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/blog/
 
Description NBIC Blog Page (October - December 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 601 page views, ranked 29th highest page on the NBIC site.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/blog/
 
Description NBIC Blog page 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 656 page views, ranked Research in Focus blog page and main blog page ranked 34th and 35th highest viewed on the NBIC site
Year(s) Of Engagement Activity 2021,2022
URL https://www.biofilms.ac.uk/blog
 
Description NBIC Blog page activity (April - June 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 370 page views, ranked 17th highest page on the NBIC site.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/blog/
 
Description NBIC Blog page activity (January - March 2021) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 507 page views, ranked 15th highest page on the NBIC site.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/blog/
 
Description NBIC Blog page activity (July - September 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 234 page views, ranked 9th highest page on the NBIC site.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/blog/
 
Description NBIC Blog page activity (October - December 2020) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 1,963 page views, ranked 13th highest page on the NBIC site.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/blog/
 
Description NBIC Business Engagement (April - June 2018) (38 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
3M
5D Health Protection Group
AB Vista
ABAgri
AHSN
biotechnology company: bio-pharmaceutical
biotechnology company: microfluidics and seaweed biopolymers
biotechnology company: seaweed biopolymers
Akzonobel
Amey Ltd
Antabio
Astra Biotech Ltd.
Belfry
Biogen
BP
Bradgate Bakery
Chemical industry
Chemical industry
Chilled Food Association
Croda
Destiny Pharma plc
ELLIPSON LIMITED
Gencoa
Genesis Biosciences
GSK
Hartmann
Jaguar Land Rover
JVS (SME)
Mondelez
Moy Park
Proctor and Gamble
Product Development Industry
Raft (SME)
Sainsburys
Smith & Nephew
Unilever
Westward Labs
Zeiss
Year(s) Of Engagement Activity 2018
 
Description NBIC Business Engagement (April - June 2019) (91 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
DNV GL
Abagri
ABR Agri
Admark Health
Akzo Nobel
Alvim
anaerobic digestion
Analytical methods company
Anglian Water
Anti-infective Industry
Aqualution Systems Ltd
ARM Reed beds
Bactigon
Biocomposites
BMG Labtec
Boots
Bouygues
Buckingham Health
Carbogenics
Cellucomp
Centre for Innovation Excellence in Livestock
Chelsea Technologies Group
Chemical supplier multinational company
Constructed wetland association
Convatec
Cosmetics Cluster
CPI
Croda
Cutest Systems CRO
Cutitronics
Destiny Pharma
Devro
e3design
Eco Tech Systems
eco3spa
EEEGR
Enviropro
Fujifilm Diosynth Biotechnologies
Gallinee
Gama Healthcare
Gel4Med
Gencoa Ltd.
GSK
Hartmann
iboxit UK
Insight Health
IVCC
JVS Products
Kimal
Kohler
Lab Tech
Labskin
LGC Group
Mary Rose Museum
Membranology
Milltrust
Mira Showers
Moy Park
N8
NatureMetrics Ltd
Oats
Oxi-Tech Solutions
paints & coatings
Pepsico
Perfectus Biomed
Perlemax
Pharmaceutical formulation SME
Philips 66
Plantwork Systems Ltd
Primerdesign
Proctor and Gamble
RADA
Recircle Ltd
recycling
S-Biomedic
Scotmas
Sensor industry
SkinBioTherapeutics PLC
Skinthinking
Smith and Nephew
sustainable materials
Thor
Unilever
Unilever Ventures
Varicon aqua
Veolia
Wallgreens Alliance Boots
Walter Gibson Tarporle
Water treatment company
Westward Laboratories
XCellr8
Year(s) Of Engagement Activity 2019
 
Description NBIC Business Engagement (April - June 2020) (74 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
5D Health Protection
AB Agri Ltd
ACTIVE COMMUNICATIONS EUROPE
ADQUOT
ALDERLEY PARK ACCELERATOR
ALLURED US
Aqdot Limited
AYTON RESEARCH
Bear Valley Ventures
Bekker Consultancy
BGI
BIOPHYS LTD
Blutest
Boots
Brightcure
CCUK
Ceramysis
Chem Aqua
Cider Solutions Limited
CLR
COMSATS
Cosmos ID
Croda
Cutest
DR RODNEY OGRIN
EAGLE GENOMICS
ECFP
ESSITY
EUROMONITOR INT
Fernox
GALLINEE
GeekTech
GLOBAL COSMETIC DEVELOPMENTS
GREEN CHEMIST CONSULTANCY
GreenTeck Global Limited
GSK
HEXISLAB
HUTTON INSTITUTE
INNOSPEC
Innovate UK
JMC SCIENTIFIC CONSULTING
Keracol Limited
KIMAL
KISACO
KTN
Labskin
LCM Environmental
Lebarde Natural Skincare
LEBARDE SKINCARE
LG
LGC Limited
LONZA
Luye Pharma Group
MAGNITUDE BIOSCIENCES
Microbiome Special Interest Group
NAVA DAYAN US
OBJ AUSTRALIA
P&G
Perfectus Biomed
PERLEMAX
Peroxigen Uk
Pilkington NSG European Technical Centre
Quadram Institute
RB
Smith and Nephew
Southern Water
SYMCEL
Symrise
THE LONDON LABS
Trigenex
UNILEVER
VINK CHEMICALS
WILLINGSFORD
Xiros
Year(s) Of Engagement Activity 2020
 
Description NBIC Business Engagement (April - June 2021) (84 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
5D Health Protection
ACI
ALDERLEY PARK
ALLURED INC (US)
ANDREW THOMPSON
Antabio
Aseptium
BEAR VALLEY VENTURES
BioSPX
BLUEBERRY THERAPEUTICS
BRIGHTCURE
CCUK
Cellevate
Cellexus
CELLINK
CIDER SOLUTIONS
ConvaTec
CPD Biotech
CURTIS & WYSS
CUTEST
Cytacoat SE
DEANNA UTROSKE (US)
Debrichem
DEBx Medical
Destiny Pharma
DIT
DSM (SWITZERLAND)
Dyson
Ebba Biotech
ECFP
Ecolab
EIT international
Exogenesis
FUTURE WORLDS
GAMA Healthcare
Gem Conservation Ltd
GLOBAL ENGAGE
GSK
IMAGINE IF
INNOGET
J CHUNG
John Innes Centre
K THOMPSON
KIMAL
KISACO
LONZA
MARVELBIOTICS
MedTech
MIRA
Modern Botany
MODERN BOTANY (IRELAND)
Mondelez International
MY MICROBIOME (GERMANY)
N CLIFFE
Neudrive
NTUitive
OODEE SKINCARE
ORIFLAME
PACIFI
Perfectus Biomed
Proctor and Gamble
PRUEX
Rapid Fluidics
RB
S-BIOMEDIC (BELGIUM)
SEQUENTIAL (US)
SIGNUM BIO (US)
Simon Cohen
SKIN MICROBIOME COUNCIL
STERLING PRESENTATION
SUMMIT EVENTS
SYMRISE
TECREA
The Watercress Company
TRUE SEARCH
TumorGenesis
UltraZonic
Unilever
United States Biological (USBiological)
Vance Chemicals
Varicon Aqua
VIRUSTATIC
VYTRUS BIOTECH (SPAIN)
XCELLER8
Year(s) Of Engagement Activity 2021
 
Description NBIC Business Engagement (April - June 2022) (330 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact The ICURe programme encouraged the six participating researchers to actively seek out over 300 business engagements. Sectors included environmental, pharmaceutical, farming, consumer products, supply chain, and charities.

NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
3M Medtech
BIOASTER
BMG LABTECH Ltd
BOOTS
BP Plc
Bruntwood SciTech
Business Hampshire
Ceramysis Ltd
Cosmetics Cluster UK
D Young and Co
GlaxoSmithKline (GSK)
Horiba
Innovate UK
LabCycle
Mapcap Tech
Mind-Point
Mondelez International
MYMICROBIOME GERMANY
Peak Contracts
Perfectus Biomed
Peroxigen UK
Pipeline Cleaning Solutions
Plant Works Systems
Proctor & Gamble
SMINK
TIOGA RESEARCH
Unilever
Upperton Pharma Solutions
Varicon Aqua
Wickham Laboratories
Year(s) Of Engagement Activity 2022
 
Description NBIC Business Engagement (January - March 2018) (16 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
2 Sisters Food Group
5D Health Protection Group Ltd (SME)
Aqualution Systems Ltd
Chemical supplier multinational company
Christeyns Food Hygiene
Clear water revival ltd (SME)
Cosmetic industry
Devro (Scotland) Ltd
FOLIUM Science (SME)
GreenTech Corporation Ltd
Mars Inc
Medtrade Products Ltd
Neem Biotech Ltd (SME)
OGIC - the Oil and Gas Innovation Centre
Surface coatings company
WRC plc
Year(s) Of Engagement Activity 2018
 
Description NBIC Business Engagement (January - March 2019) (50 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
3M
5D Health Protection Group Ltd.
Acquire Control
Adina Cosmetic Ingredients
Analytical methods company
Antimicrobial coating SME
Aston Chemicals
Bear Valley Ventures
Bioquell
Bioxydyn
BP
Cam Stent
Centre for Innovation Excellence in Lifestock
Centre for Process Innovation Ltd.
Chemical Industry
Cornelius Group PLC
Croda
Cutest
Danone
Erasmus MC
Fourth State
GAMA Healthcare Ltd.
Gencoa Ltd.
GSK
Holden-Pigg
Innospec
Innovate UK
Jaguar Land Rover
Jellagen
JRH Water Management
Kohler
Lake Personal Care
Life Sciences Company
Marine Biosensing
Marine coatings industry
Medical device R&D SME
Medicines Catapult
Mondelez
Oats
PepsiCo
Proctor and Gamble
ProTec Ingredia Ltd.
Quadralene Ltd
Smith and Nephew
Symrise
Unilever
Varicon Aqua
Water treatment company
Willingsford
Zeiss
Year(s) Of Engagement Activity 2019
 
Description NBIC Business Engagement (January - March 2020) (97 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
2 Sisters Food Group
Agroscope
ALDERLEY PARK ACCELERATOR
AME plc
AMT
Aqualution Systems
B Braun (Malaysia)
BASF
Bear Valley Ventures
BETATEC
BetaTec Hop Products
Biofilm
BIOMx
Biovale
BLUTEST
Boots
BP plc
Buckingham Healthcare
Campden BRI
CELLINK
Cellink
Chilled Food Association
COSMELINK
COSMETICS CLUSTER
Croda plc
CTPA
Cutest
Cystic Fibrosis Trust
Demuris
Destiny Pharma
DNV GL
Eagle Genomics
ENTERPRISE EUROPE NETWORK
ESSITY
European working community for food inspection and consumer protection
FCO SINGAPORE
Fernox
Firth of forth lobster hatchery
Fourth State Medicine
Freedom Hygiene
Gallinée
Greenteck Global
GSK
Holiferm
Ian Steel ltd
IDEPS
iFormulate
INNOSPEC
JLP COSMETICS
KERACOL
Kimal
KISACO RESEARCH
KTN
LABSKIN
LGC
Lonza
Molendotech
Mondelez International
Moy Park
National Physical Laboratory
NCIMB
NIHR
Oat Cosmetics
OPEN Health
Oxi-Tech Solutions
Perfectus Biomed
Peroxigen Uk
Portsmouth Aviation
Proctor and Gamble
PZ Cussons
RAHN
Reckitt Benckiser
SCS
SEQUENTIAL
Severn Trent Water
SHELL
Shimyatech
SKINNOVATION
Smith and Nephew
Society for Applied Microbiology
SPECIALITY DIAGNOSTIX
Sterilex Co
Symcel
Symrise
Tecrea Ltd
THIS IS MATRIX
THOR
Touchlab
Unilever
Varicon Aqua
Veolia
VINK CHEMICALS
VIVIMED LABS
Water Inducstry Research Centre
Westward Laboratories
Xiros plc
Xirox
Year(s) Of Engagement Activity 2020
 
Description NBIC Business Engagement (January - March 2021) (78 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
5D Health Protection
A Pugh
ACI
Agecurve Ltd.
Alderley Park
Allured Inc. US
APC Microbiome
Aqualutions
Aspira Solutions
Ayton Research
Bear Valley Ventures
Biogelx
Bioquell
Black-Kite
Boots
Brightcure Ltd.
Campden BRI
Cellevate
Cellexus
Centre for Innovation Excellence in Livestock (CIEL)
Ceramysis Ltd
Chilled Food Association
Church and Dwight
Cider Solutions
CitroxBio
Cleanity
Cosmetics Cluster UK
Cosmos ID
CubeLabs
Curtis & Wyss
Cutest
Deanna Utroske
DEbX
Destiny Pharma
Diamond Pet Food
DIT
Dr Adam Glen
Draper Biotech
Electrox
ENE BIo
Freedom Hygiene
Gallinee
GISMO
GSK
HansonWade
Hexislab
Iformulate
ImagineIF
J Chung
JVS
Kersia
kisaco
Kohler
KTN
Lake CM
Lebarde
LGC
L'Oreal
Lynam Pharma
M Tatlow
Magnitude
Marvel Biotics
Modern Botany
My Microbiome
NPL
Peroxigen UK Limited
Protlab
Purex
QMS Consultancy Ltd
Quadram
RIC . CO .UK
S-Biomedic
Shimyatech
Skin Microbiome Council
Skin Thinking
Society of Cosmetic Scientists UK
Symbiome
Symrise
Unilever
Upperton Pharma Solutions
USDA Agricultural Research Service
Virustatic
Vytrus Biotech
Water Cress
XCellR8
Year(s) Of Engagement Activity 2021
 
Description NBIC Business Engagement (January - March 2022) (67 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
5D Health Protection Group Ltd
ACI
ALDERLEY PARK
ALLURED MEDIA
AOBIOME
AromaTherapy Shed
BEAR VALLEY VENTURES
BELANO MEDICAL
Biocidin
Biofilm (Journal)
BLUTEST
BOOTS
Brightcure
Camstent Ltd.
Cider Solutions Ltd
Conidia
Cosmetics Cluster UK
Cosmos ID
Croda
CTPA
CURTIS WYSS
CUTEST
DERMALA
Destiny Pharma
Ecolab
EMMA NASH
Exogenesis
FARAPACK
FRONTIER IP
GALLINEE
GINGER LEADERSHIP
HANDSON WADE
Innoventions
IoCyte
ITN
Johnson & Johnson
Kimal
KIND TO BIOME
LABSKIN
LGC
Little Butterfly London
LONZA
M NAIM
Micramed
Mondelez International
MYMICROBIOME AG
National Physical Laboratory
Oat Cosmetics
Penrhos Bio
Perfectus Biomed
PERLEMAX
Peroxigen UK
Proctor & Gamble
PZ CUSSONS
Reckitt Benckiser Group plc
S-BIOMEDIC BELGIUM
SC JOHNSON
SCINDO BIO
SEQUENTIAL SKIN
SMINK
Smith & Nephew
TELEFLEX
TIOGA RESEARCH
UNILEVER
VIRUSTATIC
Wickham Laboratories
XCellR8
Year(s) Of Engagement Activity 2022
 
Description NBIC Business Engagement (July - September 2018) (56 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
3M
5D Health Protection
Akzonobel
Anglian Water
BioCity
Biocomposites
BluTest Laboratories Ltd
BP
Cammell Laird
Camstent Ltd
CEIDR
Cellucomp
Centre for Process Innovation
Chelsea Technologies Group
Chemical Industry
Chilled Food Association
Destiny Pharma
Ellipson
Eurofarma
Functional coatings SME
Gencoa
Genesis Biosciences
GSK
Ingenza
Innovation Agency NWC, AHSN for the North West Coast
Jaguar Land Rover
Knowledge Transfer Network
Liverpool City Region LEP
Medicines Discovery Catapult
Moy Park
Neem Biotech
Nottingham LEP
Novolab Ltd
NSG European Technical Centre
NSG Group Pilkington
Oral Dent
Oscar Mayer
Ozo Innovations
Pall
Pennotec
Perfectus Biomed
Plymouth Marine Laboratories Applications
Proctor and Gamble
Sainsbury's
Sefton Technologies Ltd
Sensor City
Seven Trent Water
Shimyatech Ltd
Smith & Nephew
Stefilex
The Roslin Institute
UNILEVER
Vector control SME
Veolia
Virtual Engineering Centre
WRC plc
Year(s) Of Engagement Activity 2018
 
Description NBIC Business Engagement (July - September 2019) (88 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
Admark Herbals
Agile
Agile Sciences
Akzonobel
Alderley Park
ALGAIA
AME Group Ltd
Analytical methods company
Antabio
Anti-infective Industry
Aqualation
Aseptium
Bear Valley Ventures
Bioclad
Biocomposites
Bioloop
Biorenewables Dev Centre 
Biovale 
Blutest
Boots
Bouygues E&S Contracting
BP International
Buckingham Healthcare
Butantan
Byotrol
Camstent Ltd.
Carbogenics Ltd
Centre for Innovation Excellence in Livestock
Ceramisys
Chemical industry
Clean Room Representative
Coloplast
Convatec
CosmeLink
CPI Wilton 
Croda
Crop Health and Protection Innovation 
Destiny Pharma
DNV GL
EMS
Fourth State Medicine
Freegiene
Gallinee Ltd.
Gel4med
GSK
Holchem
IDEP
IMCD
Inospin
JVS Products
Kimal
Kohler
KTN
Labtech
LCM Environmental
Life Sciences Company
Lipoid Kosmetik AG
Lubrizol
Medical device
Medtrade
Megalabs
Membranology
Metallinear
Mike Dudbridge 
National Physical Laboratory
NCIMB
NovaBiotics
Oat Cosmetics
Organox
Origimm GmbH
Oxford Nanopore
PALL Corportation
Perfectus Biomed
Personal and Homecare
PML applications
Proctor & Gamble
Recircle Ltd.
RTC North
Samworth Brothers
Severn Trent
Shimyatech
Siemens
Smith and Nephew
Symrise
Unilever
Veolia
Viadynamics
Whiteley corporation
Year(s) Of Engagement Activity 2019
 
Description NBIC Business Engagement (July - September 2020) (66 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
5D Health Protection
ACI EUROPE
ALDERLEY PARK ACCELERATOR
AMWAY
AYTON RESEARCH
B. Braun
Bear Valley Ventures
BEIERSDORF
BetaTec Hop Products
Brightcure
CC Bio
CCUK
Cellexus
Chem Aqua
Citrox Biosciences Ltd
Cleanity
ConvaTec Ltd
CORNELIUS
CRODA
Cutest
D&Consultants
DAVID ELLIOTT CONSULTANCY
DR JONATHAN CROWTHER CONSULTANCY
DR PAPPAS CONSULTANCY
FROST & SULLIVAN
GSK
HGF Limited
HPCI MEDIA
Innoventions
J&J
JC & ASSOCIATES
Keracol Limited
Kimal
Labskin
LCM Environmental
Lonza
Magnitude Biosciences
MITRA BIO
MY MICROBIOME
Needlers Ltd
ORALDENT
ORIGIMM BIOTECH
P&G
Perfectus Biomed
Peroxigen Uk
PETER CARTWRIGHT CONSULTANCY
PHIL WATERFIELD CONSULTANCY
PMP CONSULTING
PZ Cussons
Reckitt Benckiser Group plc
SCHAPERA - OBJ GLOBAL
SCS (UK)
SET SQUARED
Smith and Nephew
STEP EXHIBITIONS
SUMMIT EVENTS
Sygnature Discovery
Symcel
TARA BIOLOGICS
TeeGene Biotech
THE RED TREE
TRI
TRIGENEX
Unilever
Veolia
VINK CHEMICALS
Year(s) Of Engagement Activity 2020
 
Description NBIC Business Engagement (July - September 2021) (99 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
3M Company
Abbvie
ACI Ltd
Adtec
Akzo Nobel
Alderley Park
AlgiPharma
ALS Global
Amprologix
Andrew Thompson
Anglian Water Services
Aperam
Arkema
Baseclear
Bayer Corporation
Bear Valley Ventures
Belmana
Blutest
Boots
BOS
Brenta
Brightcure
Cairn
Cambridge Network
Century Water
Chemexpo UK
Colgate
Corrosion Alliance
Cosmetics Cluster UK
CosmosID
Croda
Cutest
Cystic Fibrosis Foundation, USA
Cystic Fibrosis Trust
Cytacoat
Delta Corporation Limited
Destiny Pharma
Diamond Light Source
DNV GL
Dr Elsa Jungman
Dr Pappas
DSM
EagleGenomics
Exogenesis
Fourth State Medicine
GAMA Healthcare
Gencoa
Global Engage
GSK
Hanson Wade
Hussein
Ibioci
Ingenza
Innoventions Ltd
ITC Limited
JFE Engineering Corporation
Kimal
Kisaco Research
Labskin
LANXESS
LGC
Liew Strategics
Lipoid Gmbh
L'Oreal
Medilink East Midlands
Medilink Ltd
Mondelez International
Mymicrobiome
Neem
Nippon Shokubai
NTUitive
Orange Grove Bio
Owens Corning
Oxitech Solutions
Pacifi
Perfectus Biomed
Peroxigen
Proctor and Gamble
Protecnica Solutions
Protlab
Pruex Ltd
QIB
REACT Specialist Cleaning
Realco
Reckitt Benckiser
Sanipur
SEPPURE
Sequential Skin
Smith and Nephew
Smith's Medical
Sooba medical
Sorted Skin
Syngulon
Tatasteel
Varicon Aqua
Vienna Water Monitoring Solutions (VWMS)
Vink Chemicals
Virustatic
Westgate Consultancy
Year(s) Of Engagement Activity 2021
 
Description NBIC Business Engagement (October - December 2018) (58 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
3M
AkzoNobel
AMR Centre
Antabio
Aquaculture
Aslan Pharmaceuticals
Belfry Therapeutics
Biocity
Biopolis
Biosurface Technologies
Blafar Ltd
Blue Biotech
Bristol Robotics Laboratory
Byotrol
Chelsea Technologies
Clear Water Revival Ltd
Croda
Cryosphere Services Ltd
Destiny Pharma
EMPA
Eurofarma
Firecrest Films
Fluxion Biosciences
Functional coatings SME
GSK
JVS
Lake Personal Care
LCM Environmental
Lucideon
Matoke Holdings
Medical device R&D SME
Medicines Discovery Catapult
Medicoat
Metalinear Ltd
Mondelez
Nu Angle
Pall Filters
Pedanious Therapeutics
Proctor and Gamble
PZ Cussons
REPSOL
Repsol
Severn Trent Water
Sloan global
Smith and Nephew
SuSos
Symcel
Temasek Life Sciences Accelerator
The BioFactory
The Clinical Trials Co
The Micron Group
Unilever
Vitacress
Vornion Biomaterials
Vytrus
Water treatment company
Willingsford Healthcare
Zeiss
Year(s) Of Engagement Activity 2018
 
Description NBIC Business Engagement (October - December 2019) (118 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
3M
A GOODYEAR JSCI
Aelius Biotech
Akzo Nobel
ALINE DELOBELLE COSMELINK CONSULTANCY (FRANCE)
AMR Centre
AMT
Antabio
AntonPaar
Aseptium
BAE Systems
BASF
BBSRC
BEAR VALLEY VENTURES
BETATEC HOP PRODUCTS
BioGaia
BIOMX ISRAEL
Bioquell Inc
BIORENEWABLE DEV CENTRE
BIOVALE
BLUTEST
Boots
BP
Bradgate Bakery / Samworths / Westward Labs
British Association for Chemical Specialities
Campden BRI
Camstent
Canal de Isabel II
CAROCELLBIO
Ceramisys
CFSA
CHAP SOLUTIONS
Chelsea Technologies Group
Chronic Urinary Tract Infection Clinic at 10 Harley Street
CLR BERLIN
ConvaTec
Corbion
CPI WILTON
Croda
CTI Biotech
CTPA
Cutest
Deinove
Destiny Pharma
DNV GL
DuPont
E4 Structures Ltd
Eagle Genomics ltd
Earlham insitute commercial wing
Eco Mist
EKP Advisory
EPCC
Equinor
ESSE
Exxon Mobil Corporation
FERNOX
Fourth State Medicine
Freegiene
Gel4Med
Giuliani S.p.A
GSK
Hallstar
Helios CORP.
HOLCHEM
Ian Steel
iCURe
Iformulate
INNOSPEC
ITRAM
Jaguar Land Rover
JVS Products
Kew Gardens
Kimal PLC
KISACO RESEARCH
Kypwell
Labskin
LAKE CM
Lucideon
Medical Innovation Centre
MediplusPharma
Mondelez
NC Group
NEEM BIOTECH
NICK MONSUL MD (USA)
OATS COSMETICS
Oilfield Microbiology Services
OPEN Health
OXFORD ANTIMICROBIALS
Oxi-Tech Solutions
Paul Hartmann AG
PERFECTUS BIOMED
PML applications
Primerdesign
Proctor & Gamble
Pukka Herbs
PZ CUSSONS
Rawwater Engineering
RB
RCT NORTH
Recircle Ltd
Repsol
Saudi Aramco
S-Biotech
SCJ
SCS UK
SEQUENTIAL
Shell
SkinBioTherapeutics Plc
Smith and Nephew
STEP EXHIBITIONS
Symprove
Symrise
THOR UK
UKCPI
Unilever
Veolia
Viadynamics
VINK CHEMICALS
Year(s) Of Engagement Activity 2019
 
Description NBIC Business Engagement (October - December 2020) (74 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
5D Health Protection
ACI
AELIUSBIOTECH
AKZONOBEL
ALDERLEY PARK
ALVIM
AYTON RESEARCH
Bear Valley Ventures
BLOOM
Brightcure Ltd
CC Bio
CCUK
Chugoku Marine Paints
Citrox Biosciences Ltd
Cleanity
CUTEST
DAVID ELLIOTT CONSULTANCY
DEBx Medical
Destiny Pharma
DNV-GL
FROST & SULLIVAN
Gallinée
General Graphene Corp
GILL WESTGATE CONSULTANCY
GLOBAL ENGAGE
GSK
Hempel
HEXISLAB
HGF Limited
HGI
I-Tech AB
IP Pragmatic
Jesmond Engineering
JORDAN GOLDSTEIN ISRAEL
JVS Products
KIMAL
KISACO GROUP
LABSKIN
Level Two: Microbiome
Lonza Ltd
L'Oreal
MAPCAP Technology Ltd
Marvelbiotics
METALINEAR
MICROBIOME MOVEMENT
Modern Botany
MY MICROBIOME GERMANY
NIBSC
NPL
ORALDENT
PERFECTUS BIOMED
Peroxigen UK Limited
React Cleaning
Reckitt Benckiser Group plc
SABA ALZABIN CONSULTANCY
Safinah Group
S-BIOMEDIC
SCS
SILAB/CORNELIUS
SKINNOVATION
Society for Applied Microbiology SFAM
SRIJAN JINDAL START-UP
SUMMIT EVENTS
Symrise
TANAY INSTEM INDIA
Teamac Marine Paints
TONY MURRAY AUSTRALIA
Unilever
Virustatic
Virustatic Shield
Vytrus Biotech
Water Innovation 2050
WELSH WATER
XCellR8
Year(s) Of Engagement Activity 2020
 
Description NBIC Business Engagement (October - December 2021) (64 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
5D Health Protection
30-Technology
ADTEC
Agroscope
ALDERLEY PARK
ALEX SEGAL
Allured Business Media
Bactiview Ltd
BEAR VALLEY VENTURE
BOOTS
Brightcure
C&T
Ceramysis
Chilled Food Association
Conidia
ConvaTec
Cosmetics Cluster UK
Cosmos ID
Croda
Cromerix
CUTEST
DANIEL YACHIA
East Midlands Trains
ECFP
EIT International
ERS Remediation
Fourth State Medicine
GLOBAL ENGAGE
HANDSON WADE
Innoget
KIND TO BIOME
KISACO
KTN
Labskin
LGC
LONZA
Madcap Technologies
Mondelez International
MRC
MYMICROBIOME
NORTHUMBRIAN WATER
Novozymes
Oxi-Tech Solutions
PERFECTUS BIOMED
Perfectus Biomed
Peroxigen UK
Proctor and Gamble
PUB, Singapore's National Water Agency
Public Utilities Board, Singapore
PZCUSSONS
Reckitt Benckiser
SEAWEED & CO
Sequential Skin
Severn Trent Water
Sinnac
SYMRISE
TATA STEEL
TELEFLEX
TusPark
Unipart Rail
Upperton Pharmaceuticals
Veolia
Virustatic
WELSH WATER
Year(s) Of Engagement Activity 2021
 
Description NBIC Business Engagement (September - December 2017) (15 companies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact NBIC regularly meet with and contact businesses across all sectors relevant to biofilms. Sometimes this is introducing NBIC to them and establishing initial links before establishing unmet needs in relation to biofilms. This can lead to us facilitating contacts with other businesses and our network of academics across our partner research institutions. We set up two way discussions with parties which can lead to projects or consultancy. In this quarter we had productive interactions with the following companies:
3M
AB Agri
Akzo Nobel
Anglian Water
Blutest Laboratories Ltd
BP
Chilled Foods Association
Croda
GSK
HARTMANN
Mondelez
Perfectus Biomed
Smith and Nephew
Unilever
Vitacress
Year(s) Of Engagement Activity 2017
 
Description NBIC CBE Biofilm Regulations and Standards workshop 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 29/04/2022
Delegates: 38
The purpose of this first workshop is to understand the needs and current status in this sector considering both Medical Devices and Pharma and establish industry and regulatory participation in a forward task /working group. In parallel CBE and NBIC (and the IBSTG) will pursue approaches to establishing a Joint programme in biofilm standardisation and prenormative activities informed by the outputs of this meeting with the goal of progressing to normative activities and international standardisation.
Year(s) Of Engagement Activity 2022
 
Description NBIC CCUK Baby Baby Skin and the Microbiome Webinar 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 29/03/22
Delegates: 82
Our fourth joint webinar with Cosmetics Cluster UK (CCUK) took place in March 2022 and brought together academic and industry expertise to focus on personal care innovation in the area of infant and baby care with a focus on skin microbiome.
The webinar took a broader approach to encompass all possible R&D developments in gentle formulations and mildness testing, sustainable ingredient trends and baby skin/microbiome biology, and also covered innovation, regulatory aspects and brand/consumer attitudes.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/baby-skin-and-the-microbiome-webinar
 
Description NBIC CCUK In Vitro Microbiome/Biofilm Models in Personal Care 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 19/10/21
Delegates: 47
The joint 'Women's Health and Feminine Care' webinar from NBIC and Cosmetics Cluster UK (CCUK) brought together both academic and industry expertise and took a broad approach to research and development in skin and vaginal health and through life stages with a particular focus on non-invasive sampling methods and pre-clinical models.
This webinar focused on the latest research and innovation as well as market trends, consumer needs and new technology solutions in the popular subject of women's health. The first part of the webinar featured speakers from industry and academia and the second part included an expert panel discussion to address questions such as, what is important to a start up? what is new in the market? what are the current opportunities and biggest technical challenges? and does a company manufacturing probiotic products need a diagnostic test? NBIC Senior Innovation Consultant, Dr Katerina Steventon said,
"At NBIC, our goal is to translate academic research and promote excellence in science in microbiome/biofilm R&D in personal care. This is our third webinar in collaboration with the CCUK, and having focused on the rising appeal of women's health and feminine care across the lifespan in research and changing consumer attitudes, the event presented the industry with a number of exciting ideas and opportunities for innovation".
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/watch-womens-health-and-feminine-care/
 
Description NBIC CCUK The science behind the skin microbiome and biofilms - evidence and claims 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 27/04/2021
Delegates: 72
This joint webinar between the National Biofilms Innovation Centre (NBIC) and Cosmetics Cluster UK (CCUK) will look at innovation trends and market opportunities in deodorants, translational research in skin microbiome/biofilms, in vitro alternatives to animal testing, new technology and small brand perspectives promoting consumer health and sustainability.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/event/innovation-in-deodorants-webinar/
 
Description NBIC CCUK The science behind the skin microbiome and biofilms - evidence and claims 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact 08/12/20
Delegates: 87
Run in collaboration with Cosmetics Cluster UK (CCUK).
Skin microbiome claims are becoming a trend in many categories yet the science is relatively in its infancy. This free webinar from Cosmetics Cluster UK (CCUK) and the National Biofilms Innovation Centre (NBIC) will include presentations and discussions which cover the market, research and innovation, as well as address questions like can pro/prebiotics be used in cosmetics? and how can the claims be credible and relevant to the consumers?
'Microbiome Growth Opportunities in Personal Care and Dermatology' Dr Sudeep Basu, Frost & Sullivan
This presentation focuses on recent development in the areas of microbiome-driven therapeutics and consumer products. An overview of key research groups, clinical and consumer focus areas and trends will be provided. The discussion will encompass a review of select technologies, markets and products as well.
Sudeep has a Ph.D. in Microbiology & Immunology and has chaired and given keynote talks at multiple Microbiome conferences. Dr Basu has experience in managing in global consulting and project management across various industries, At Frost & Sullivan he leads the Innovation Services practice to present an integrated IP-Tech-Market perspective and advises corporate R&D, governments, universities, and government R&D institutions on technology innovation and Intellectual Property strategy, energy policy and R&D policy. He has first-hand experience in working across value chain from IP development to IP commercialization.
'Skin Microbiome vs. Biofilms: A New Approach to Formulation' from Dr Katerina Steventon, NBIC and Dr Kristin Neumann, MyMicrobiome
In a dialogue between two approaches, Dr Kristin Neumann and Dr Katerina Steventon will discuss a juxtaposition of skin microbiome and the presence of biofilms on human skin. Dr Neumann will talk about testing for 'skin microbiome friendly' formulations that aim to maintain healthy skin microbiome on human body. Dr Steventon helps innovative companies with new research to explore potential shifts of skin microbiome to dysbiosis (imbalance) and biofilms. She will explore biofilm features in skin conditions (like acne and dermatitis), scalp health and in intertriginous niches (axilla, feminine health). Formulating new personal care products should take both approaches into consideration. Given that our understanding of the healthy skin microbiome baseline is in infancy, we strongly advocate for advancing fundamental research in both of these areas and keeping the dialogue alive.
Dr Katerina Steventon is a healthcare specialist with substantial experience of working at the clinical, commercial and research interface. She holds a MSc in Clinical Biochemistry, a PhD in Transdermal Absorptions and over 20 years of global work experience in the personal care and wound care industry. Katerina has an in-depth knowledge of skin biology in both its healthy and diseased states. The strengths Katerina brings to NBIC comprise a comprehensive understanding of the industry and academia, commercialisation of research in a spectrum of healthcare areas and an experience of running an innovation consultancy with a focus on functional skincare.
Dr Kristin Neumann holds a PhD in microbiology and has been researching in the field of microbiology and microbiome for more than 12 years. In 2018, she founded MyMicrobiome.info, which has since become the leading microbiome education platform, to make the topic of microbiome, which is so important for health, accessible to non-scientists. In addition, Kristin and her partner Tanja developed the world's first and only quality standard for microbiome-friendly skin and care products.
'Microbiome - The Regulatory Landscape' from Olivia Santoni, Bloom Regulatory
Olivia Santoni will discuss the legal status of ingredients to explore the use of pro/prebiotics in cosmetic products, the purpose of adding pre/probiotics in cosmetic products, and if there are medicinal and cosmetic functions to discover. Olivia will also look at claims substantiation.
Olivia has an extensive knowledge of the cosmetics industry globally. She studied business law and healthcare product law before specialising in regulatory affairs. In 2008 She joined the UK Cosmetics Toiletry and Perfumery Association (CTPA) and was appointed in 2016 Director, Regulatory and International Services. Olivia managed the Regulatory and International team to deliver support and advice to members as well as advocate for the interest of the industry. She has been leading the Association's work on Brexit and international regulatory affairs. Over the years Olivia has been an active participant at Cosmetics Europe groups on both regulatory and international issues. Previously, she worked for the French Agence Nationale de Sécurité du Médicament et des Produits de Santé (ANSM) and was part of the international department of the French cosmetics trade association (FEBEA). In 2019 Olivia founded Bloom Regulatory Ltd to provide regulatory and strategic support to cosmetics companies.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/skin-microbiome-and-biofilms/
 
Description NBIC Core Partners to Advance New Treatments for Cystic Fibrosis Infections (Miguel Camara) 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/new-treatments-cystic-fibrosis/
 
Description NBIC CosmosID Utilising Metagenomics in early to late-stage R&D 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 23/02/22
Delegates: 51
Our new series of webinar talks will feature speakers from across industry and academia aimed primarily at PhD and postdoctoral researchers in our partner universities and networks.
'Utilising Metagenomics in Early to Late-Stage R&D' with Jennifer Mackay and Dana Walsh of CosmosID was the first in this new series of talks and was targeted at those interested in learning more about metagenomics workflows, the challenges involved and those things that need to be controlled to provide a quality outcome. For the first part of the webinar Jennifer looked at metagenomics workflows and provided an introduction to CosmosID. In the second part of the webinar Dana presented data showcasing analysis techniques for microbiome research.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/utilising-metagenomics?utm_medium=email&_hsmi=204922491&_hsenc=p2ANqtz-8c...
 
Description NBIC Detection of Biofilms Workshop 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact NBIC held its first Industry /Research Partner meeting on the 24th September in Birmingham on the subject of Biofilm Detection. This is one of the four core strategic interventional themes (the others being Prevent, Manage and Engineer) NBIC is centring its research and engagement strategy around. There were approximately 70 delegates in attendance (75 registrations) with approximately 40% from Industry. There were twenty different companies represented from SME to large and from multiple sectors. Fifteen different Research Institutions (members or affiliates of NBIC) also attended, We discussed, in a workshop format led by industry problem owners , approaches to achieve accurate quantitative and actionable biofilm detection across multiple scales and sectors (e.g. the built & natural environment , manufacturing processes and supply chain, finished products, food, human and veterinary). Fifteen different industry partners had already provided their summation of unmet needs and all delegates received these ahead of time. Outputs are: 1. Report for all attendees and wider dissemination; 2. Translational priorities for possible funding calls, 3. Identifying gaps in current research; 4. Key basic science challenges, 5. Industry-relevant solutions to immediately addressable challenges, 6. Collaboration opportunities between academic partners, 7. Possible responses to additional funding / grant routes both UK/International, 8. Building our map of the biofilm field. We will in addition be following up directly with industry members to further explore how the workshop output can help them progress their identification of solutions.
Year(s) Of Engagement Activity 2018
URL https://www.biofilms.ac.uk/detection-of-biofilms-report-now-available-for-download-2/
 
Description NBIC Engineering Biofilms workshop 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Explore Biofilm understanding, opportunity and challenge in industry and research in Biofilm Engineering Area. Group discussion and presentations.
Year(s) Of Engagement Activity 2019
URL https://www.biofilms.ac.uk/biofilm-engineering-workshop-highlights/
 
Description NBIC Facebook Channel 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 35 New Followers, 369 Total Engagements, 108 Referrals to NBIC website
Year(s) Of Engagement Activity 2021,2022
URL https://www.facebook.com/ukbiofilms
 
Description NBIC Facebook Channel activity (April - June 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 20 New Followers, 123 Total Engagements, 261 Referrals to NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.facebook.com/ukbiofilms
 
Description NBIC Facebook Channel activity (July - September 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 26 New Followers, 160 Total Engagements, 111 Referrals to NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.facebook.com/ukbiofilms
 
Description NBIC Facebook channel activity (April - June 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 20 New Followers, 123 Total Engagements, 20 Referrals to NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.facebook.com/ukbiofilms
 
Description NBIC Facebook channel activity (January - March 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 45 New Followers, 97 Total Engagements, 44 Referrals to NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.facebook.com/ukbiofilms
 
Description NBIC Facebook channel activity (October - December 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 7 New Followers, 170 Total Engagements, 49 Referrals to NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.facebook.com/ukbiofilms
 
Description NBIC Focus Group with Cellexus and Cellevate 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 15/06/2021
Delegates: 40
This event is a must for anyone working in the field of biofilm culturing, who is interested in developing improved model systems. This will be particularly useful if you would like these systems to better reflect different 3D geometries and novel culturing conditions for preparing biofilms or materials produced by biofilms in single or multispecies systems.
Year(s) Of Engagement Activity 2021
URL https://www.eventbrite.co.uk/e/cellexus-and-cellevate-focus-group-tickets-152331897807?utm_medium=em...
 
Description NBIC Individual Introductions (April - June 2019) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact We make individual introductions to contacts in our network where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil. As a result of these communications we made connections for the following company: Labskin.
Year(s) Of Engagement Activity 2019
 
Description NBIC Individual Introductions (April - June 2020) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact We make individual introductions to contacts in our network where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil. As a result of these communications we made connections for the following companies:
Bear Valley Ventures
Bekker Consultancy
Blutest
Brightcure
Cider Solutions Limited
Cosmos ID
Croda
Cutest
Keracol Limited
KTN
Labskin
Lebarde Natural Skincare
Perfectus Biomed
Pilkington NSG European Technical Centre
Smith and Nephew
Symrise
Trigenex
Xiros
Year(s) Of Engagement Activity 2020
 
Description NBIC Individual Introductions (April - June 2021) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact We make individual introductions to contacts in our network where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil. As a result of these communications we made connections for the following companies:
AME Group
Clean Blue Ltd
Exogenesis
Symrise
Year(s) Of Engagement Activity 2021
 
Description NBIC Individual Introductions (April - June 2022) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact We have made 1 individual introductions between contacts in our network. Such introductions are made where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil.
Year(s) Of Engagement Activity 2022
 
Description NBIC Individual Introductions (January - March 2020) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact We make individual introductions to contacts in our network where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil. As a result of these communications we made connections for the following companies:
Bear Valley Ventures
BetaTec Hop Products
Boots
BP plc
GSK
IDEPS
Kimal
Lonza
NIHR
OPEN Health
P&G
Portsmouth Aviation
PZ Cussons
Reckitt Benckiser Group plc
Smith and Nephew
Symrise
Unilever
Xiros
Year(s) Of Engagement Activity 2020
 
Description NBIC Individual Introductions (January - March 2021) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact We make individual introductions to contacts in our network where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil. As a result of these communications we made connections for the following companies:
Agecurve
ERM Group, Inc
GSK
Micramed
Symcel
Year(s) Of Engagement Activity 2021
 
Description NBIC Individual Introductions (January - March 2022) (6) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact We have made 6 individual introductions between contacts in our network. Such introductions are made where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil.
Year(s) Of Engagement Activity 2022
 
Description NBIC Individual Introductions (July - September 2019) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact We make individual introductions to contacts in our network where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil. As a result of these communications we made connections for the following companies:
AME Group Ltd
Bear Valley Ventures
Bioclad
Boots
Buckingham Healthcare
Destiny Pharma
GSK
NovaBiotics
Symrise
Year(s) Of Engagement Activity 2019
 
Description NBIC Individual Introductions (July - September 2020) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact We make individual introductions to contacts in our network where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil. As a result of these communications we made connections for the following companies:
B. Braun
BetaTec Hop Products
Brightcure
Citrox Biosciences Ltd
ConvaTec Ltd
Cutest
D&Consultants
GSK
HGF Limited
Innoventions
Keracol Limited
Kimal
Labskin
Needlers Ltd
Perfectus Biomed
PZ Cussons
Reckitt Benckiser Group plc
Smith and Nephew
Sygnature Discovery
TeeGene Biotech
Unilever
Year(s) Of Engagement Activity 2020
 
Description NBIC Individual Introductions (July - September 2021) (4) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact We have made 4 individual introductions between contacts in our network. Such introductions are made where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil.
Year(s) Of Engagement Activity 2021
 
Description NBIC Individual Introductions (October - December 2019) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact We make individual introductions to contacts in our network where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil. As a result of these communications we made connections for the following companies:
Aelius Biotech
Akzo Nobel
Aseptium
Bioquell Inc
Kimal
Repsol
Smith and Nephew
Symrise
Year(s) Of Engagement Activity 2019
 
Description NBIC Individual Introductions (October - December 2020) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact We make individual introductions to contacts in our network where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil. As a result of these communications we made connections for the following companies:
Citrox Biosciences Ltd
DEBx
Gallinée
HGF Limited
Level Two: Microbiome
L'Oreal
MAPCAP Technology Ltd
Reckitt Benckiser Group plc
Year(s) Of Engagement Activity 2020
 
Description NBIC Individual Introductions (October - December 2021) (2) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact We have made 2 individual introductions between contacts in our network. Such introductions are made where we believe that the parties have a shared interest in research and development or where one party has an industrial or academic need that the other party is able to fulfil.
Year(s) Of Engagement Activity 2021
 
Description NBIC Instagram Channel 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 75 New Followers, 462 Profile Visits, 548 Post Engagements
Year(s) Of Engagement Activity 2021,2022
URL https://www.instagram.com/ukbiofilms/
 
Description NBIC Instagram Channel activity (April - June 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 59 New Followers, 330 Profile Visits, 316 Post Engagements.
Year(s) Of Engagement Activity 2021
URL https://www.instagram.com/ukbiofilms/
 
Description NBIC Instagram Channel activity (April - June 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 8 New Followers, 45 Profile Visits, 43 Post Engagements.
Year(s) Of Engagement Activity 2022
URL https://www.instagram.com/ukbiofilms/
 
Description NBIC Instagram Channel activity (January - March 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 27 New Followers, 79 Profile Visits, 154 Post Engagements.
Year(s) Of Engagement Activity 2022
URL https://www.instagram.com/ukbiofilms/
 
Description NBIC Instagram Channel activity (July - September 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 50 New Followers, 311 Profile Visits, 508 Post Engagements.
Year(s) Of Engagement Activity 2021
URL https://www.instagram.com/ukbiofilms/
 
Description NBIC Instagram Channel activity (October - December 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 11 New Followers, 77 Profile Visits, 120 Post Engagements.
Year(s) Of Engagement Activity 2021
URL https://www.instagram.com/ukbiofilms/
 
Description NBIC Introduction to Commercialisation (February 2022) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 31 January and 9, 10, 16 and 18 February 2022. Delegates: 19. Run by Entrepreneur Business School (EBS) for PhD Students and Interdisciplinary Research Fellows. Goals: The objective is to introduce Doctoral candidates to innovation, entrepreneurship, the basics of business acumen and how to build collaboration and networks.
Year(s) Of Engagement Activity 2022
 
Description NBIC Introduction to Commercialisation (January 2021) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact 06, 12, 13, 19 and 20 January 2021.
Delegates: 13.
Run by Entrepreneur Business School (EBS) for PhD Students and Interdisciplinary Research Fellows. Goals: The objective is to introduce Doctoral candidates to innovation, entrepreneurship, the basics of business acumen and how to build collaboration and networks.
Year(s) Of Engagement Activity 2021
 
Description NBIC Introduction to Commercialisation (June 2020) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact 03, 04, 08 and 09 June 2020
Delegates: 11
Run by Entrepreneur Business School (EBS) for PhD Students and Interdisciplinary Research Fellows.
Goals: The objective is to introduce Doctoral candidates to innovation, entrepreneurship, the basics of business acumen and how to build collaboration and networks.
Year(s) Of Engagement Activity 2020
 
Description NBIC Launch Biofilm Create! Photography and Art Competition 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on the NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/nbic-launch-biofilm-create-photography-art-competition/
 
Description NBIC Launch Open Innovation Partnering Platform 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/open-innovation/
 
Description NBIC LinkedIn channel 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 920 new followers, 2150 NBIC LinkedIn page views, 6,655 engagements, 953 referrals to the NBIC website
Year(s) Of Engagement Activity 2021,2022
URL https://www.linkedin.com/company/national-biofilms-innovation-centre
 
Description NBIC LinkedIn channel (April - June 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 163 new followers, 700 NBIC LinkedIn page views, 1,366 engagements, 202 referrals to the NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.linkedin.com/company/national-biofilms-innovation-centre
 
Description NBIC LinkedIn channel (January - March 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 211 new followers, 711 NBIC LinkedIn page views, 1,636 engagements, 311 referrals to the NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.linkedin.com/company/national-biofilms-innovation-centre
 
Description NBIC LinkedIn channel (October - December 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 100 new followers, 544 NBIC LinkedIn page views, 757 engagements, 94 referrals to the NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.linkedin.com/company/national-biofilms-innovation-centre
 
Description NBIC LinkedIn channel activity (April - June 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact 153 new followers, 775 NBIC LinkedIn page views, 1,421 engagements, 292 referrals to the NBIC website
Year(s) Of Engagement Activity 2021
URL https://www.linkedin.com/company/national-biofilms-innovation-centre
 
Description NBIC LinkedIn channel activity (January - March 2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 202 new followers, 810 NBIC LinkedIn page views, 1,261 engagements, 497 referrals to the NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.linkedin.com/company/national-biofilms-innovation-centre
 
Description NBIC LinkedIn channel activity (July - September 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 196 new followers, 1029 NBIC LinkedIn page views, 1,556 engagements, 108 referrals to the NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.linkedin.com/company/national-biofilms-innovation-centre
 
Description NBIC LinkedIn channel activity (October - December 2020) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 4,983 new followers, an increase of 143%
2,436 NBIC LinkedIn page views, 3,746 engagements, 1,087 referrals to the NBIC website.
Year(s) Of Engagement Activity 2020
URL https://www.linkedin.com/company/national-biofilms-innovation-centre
 
Description NBIC Marine Webinar 1: Biocide use in Antifouling Coatings - The Regulatory Framework 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact 12/10/20
Delegates: 69
Guest speakers: Tomoyoshi Chiba, from Chugoku Marine Paints, in Japan and Geoff Mackrill, Teamac Marine Paints in the UK.
Jointly organised by National Biofilms Innovation Centre UK (NBIC UK), Singapore Centre for Environmental Life Sciences Engineering (SCELSE), Singapore National Biofilm Consortium (SNBC), and PML Applications Ltd.
Proudly supported by the Singapore's National Mirror Working Group for Anti-Fouling and Ballast Water Treatment (NMWG AF & BWT), and the Singapore Manufacturing Federation - Standards Development Organisation (SMF-SDO). The NMWG AF & BWT, one of the standards development committees managed by SMF-SDO under the Singapore Standardisation Programme, represents Singapore in the development of selected International Standards under the ISO/TC 8 Ships and Marine Technology as well as the ISO/TC 8/SC 2/WG 5 Anti-fouling systems on ships. Biocide use in antifouling coatings - The regulatory framework, The challenges and opportunities of antifouling biocide regulations - An industrial perspective.
Are you developing the next best antifouling solution? Perhaps you are looking for such a solution? If so, this webinar series is for you.
Biofouling control on vessel hulls is receiving plenty of attention with recent changes in commercial vessel activity patterns, together with an increasing spotlight on vessel efficiency, fuel consumption, and bio-security. However, increasing pressure to decrease the reliance on biocides in antifouling coatings is providing antifouling coating manufacturers with both compliance issues and technology development opportunities. This series of webinars is designed to inform cross-sector participants on the challenges faced under the current regulatory framework for producing efficacious antifouling coatings, as well as explore novel antifouling technology development opportunities under this legislation.
Bringing together antifouling technology users and developers, these webinars present an ideal platform to discuss new ideas and concepts, with the potential for future collaborative projects on marine biofilm control technologies, either directly funded or via applications to funding bodies such as Innovate UK, National Research Foundation (Singapore), NBIC UK and SNBC, Singapore.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/marine-biofouling-webinars/
 
Description NBIC Marine Webinar 2: The challenges and opportunities of antifouling biocide regulations - An industrial perspective 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact 26/10/20.
Delegates: 64
Jointly organised by National Biofilms Innovation Centre UK (NBIC UK), Singapore Centre for Environmental Life Sciences Engineering (SCELSE), Singapore National Biofilm Consortium (SNBC), and PML Applications Ltd.

Introduction and welcome (5 minutes, by NBIC, PML Applications Ltd and SNBC)
Talk by Neil Oxtoby, International Paint Ltd (20 minutes)
Open questions (20 minutes)

This webinar will provide a brief overview of the challenges and opportunities that increasing pressure on the use of biocides places on antifouling coating manufacturers, and how they are responding.

The speaker will cover:
1. How do the current biocide rules and regulations affect their business, and what is the direction of travel in the future?
2. Are there opportunities for technology development?
3. What are the industrial needs either in terms of novel technology or regulatory support / justification?
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/marine-biofouling-webinars/
 
Description NBIC Marine Webinar 3: Biofilm Control of the Future 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact 09/11/20
Delegates: 60
Jointly organised by National Biofilms Innovation Centre UK (NBIC UK), Singapore Centre for Environmental Life Sciences Engineering (SCELSE), Singapore National Biofilm Consortium (SNBC), and PML Applications Ltd.

Agenda
Introduction and welcome (5 minutes by NBIC and SNBC)
Review of content covered in Webinars 1 and 2 (5 minutes by PML)
6-8 rapid pitches from SMEs, technology producers and researchers (5 minutes each)
Close including future networking and funding opportunities (10 minutes by NBIC and SNBC)

This last session in the series will provide an opportunity to learn about new marine biofilm control approaches and technologies that could be used to ensure that hulls remain clean despite restrictions on traditional antifouling technologies. We will hear short updates from a range of technology developers and researchers together with learning about possible funding routes to take marine biofilm control technologies forward including from NBIC / SNBC.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/marine-biofouling-webinars/
 
Description NBIC Microbe-Metal interactions workshop 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact The main objective of this workshop was to bring together key complementary academic and industry expertise and thought-leadership in biofilms, contamination of metal surfaces and biocorrosion processes across the life and physical sciences and engineering domains within NBIC, CBE and internationally in order to identify the key knowledge gaps and research challenges for future projects and research collaboration.
Year(s) Of Engagement Activity 2019
 
Description NBIC NBIC Data Carpentry (R) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact 13-14/10/20
Delegates: 18
Delivered by the Software Sustainability Institute for the members of the NBIC community.
Data Carpentry develops and teaches workshops on the fundamental data skills needed to conduct research. Its target audience is researchers who have little to no prior computational experience, and its lessons are domain specific, building on learners' existing knowledge to enable them to quickly apply skills learned to their own research. Participants will be encouraged to help one another and to apply what they have learned to their own research problems.
Who: The course is aimed at graduate students and other researchers. You don't need to have any previous knowledge of the tools that will be presented at the workshop.
A video of the event is available here: https://www.youtube.com/user/SoftwareSaved
Year(s) Of Engagement Activity 2020
URL https://softwaresaved.github.io/2020-10-13-ssi-online/
 
Description NBIC NBIC Software Carpentry workshop (Python) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact 10-11/11/20
Delegates: 12
Run by the Software Sustainability Institute for the members of the NBIC community.
Software Carpentry aims to help researchers get their work done in less time and with less pain by teaching them basic research computing skills. This hands-on workshop will cover basic concepts and tools, including program design, version control, data management, and task automation. Participants will be encouraged to help one another and to apply what they have learned to their own research problems.
During these sessions participants will learn the basics of writing code and data management in Python to solve research problems, as well as managing code using version control and working with files and programs from command line shell. Workshop will be delivered online (via Zoom) in an interactive and informal setting where participants will code along live with instructors and will have the opportunity to have many of their questions answered.
A video of the event is available here: https://www.youtube.com/playlist?list=PLpX1jXuNTXGr2EBLqN7eYnDqjQiYxj4hr
Year(s) Of Engagement Activity 2020
URL https://softwaresaved.github.io/2020-11-10-ssi-online/
 
Description NBIC Networking Event 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact 13-14/01/20
Delegates: 30
Attendance: NBIC Executive Management Team, Operational Management Group, Interdisciplinary Research Fellows and PhD students.
Networking within NBIC core partner institutions. Objectives:
To bring the whole NBIC community from our 4 core Universities together.
To share successes and future goals.
To help build a sustainable NBIC.
Including training sessions for Public Engagement and Outreach and Entrepreneurship (provided by Alderley Park).
Year(s) Of Engagement Activity 2020
 
Description NBIC Open Innovation Webinar 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 03/11/21
Delegates: 40
Connecting academic and industry partners to pair problem with solution and opportunity with need, has been one of the most valued offerings to our members. The NBIC Open Innovation Partnering Platform is our new collaborative online platform for sharing research, funding, and innovation opportunities between NBIC's industry and research partners.
Our webinar with Innoget, focused on the benefits of Open Innovation, whilst highlighting the platform's key features. We encourage you to watch the webinar recording below if you are interested in sharing opportunities and making direct connections with other partners in a fast and secure environment.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/nbic-open-innovation-webinar?utm_medium=email&_hsmi=179209273&_hsenc=p2AN...
 
Description NBIC Partner Searches (April - June 2019) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. As a result of these communications we made connections for the following companies:
Akzo Nobel
Aqualution Systems Ltd
Centre for Innovation Excellence in Livestock
Chelsea Technologies Group
CPI
Destiny Pharma
e3design
Gama Healthcare
Gel4Med
Kimal
Kohler
Perfectus Biomed
Smith and Nephew
Westward Laboratories
Year(s) Of Engagement Activity 2019
 
Description NBIC Partner Searches (April - June 2020) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. As a result of these communications we made connections for the following companies:
AB Agri Ltd
Aqdot Limited
Croda
De Montfont University
Fernox
GreenTeck Global Limited
Symcel
Trigenex
Year(s) Of Engagement Activity 2020
 
Description NBIC Partner Searches (April - June 2021) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. As a result of these communications we made connections for the following companies:
5D Health Protection
Electrox Water
IMI Critical Engineering
Molecular Plasma Group (MPG)
Reckitt Benckiser Group plc
Year(s) Of Engagement Activity 2021
 
Description NBIC Partner Searches (January - March 2020) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. As a result of these communications we made connections for the following companies:
2 Sisters Food Group
Aqualution Systems
Chilled Food Association
Fourth State Medicine
Freedom Hygiene
Gallinée
LGC Group
National Physical Laboratory
Oat Cosmetics
P&G
Shimyatech
Smith and Nephew
Tecrea Ltd
Westward Laboratories
Xirox
Year(s) Of Engagement Activity 2020
 
Description NBIC Partner Searches (January - March 2021) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. In the period January - March 2021 we sent 16 partner searches (10 for industry, 5 for academics and 1 for a collaboration between an industry and academic partner) and received 27 responses.
As a result of these communications we made connections for the following companies:
Aspira Solutions
B. Braun
Boots
General Graphene Corporation (GGC)
iFormulate
MarvelBiotics
Tecrea Ltd
The Watercress Company
Year(s) Of Engagement Activity 2021
 
Description NBIC Partner Searches (January - March 2022) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. In the period January - March 2022 we sent 1 partner search.
Year(s) Of Engagement Activity 2022
 
Description NBIC Partner Searches (July - September 2018) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. As a result of these communications we made connections for the following companies:
5D Health Protection
Cellucomp
Chilled Food Association
Destiny Pharma
Genesis Biosciences
Ingenza
Jaguar Land Rover
NSG European Technical Centre
Oral Dent
Perfectus Biomed
Stefilex
Unilever
Year(s) Of Engagement Activity 2018
 
Description NBIC Partner Searches (July - September 2019) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. As a result of these communications we made connections for the following companies:
Admark Herbals
ALGAIA
Aqualation
Bouygues E&S Contracting
BP International
Byotrol
Camstent Ltd.
Carbogenics Ltd
Centre for Innovation Excellence in Livestock
Gel4med
Inospin
KTN
Labtech
Membranology
National Physical Laboratory
NCIMB
Oat Cosmetics
Perfectus Biomed
Recircle Ltd.
Severn Trent
Shimyatech
Year(s) Of Engagement Activity 2019
 
Description NBIC Partner Searches (July - September 2020) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. As a result of these communications we made connections for the following companies:
CC Bio
Cellexus
Cleanity
Innoventions
Magnitude Biosciences
Year(s) Of Engagement Activity 2020
 
Description NBIC Partner Searches (October - December 2019) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. As a result of these communications we made connections for the following companies:
Chelsea Technologies Group
ConvaTec
E4 Structures Ltd
Fourth State Medicine
Gel4Med
Jaguar Land Rover
Kimal
Labskin
Paul Hartmann AG
Year(s) Of Engagement Activity 2019
 
Description NBIC Partner Searches (October - December 2021) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. In the period October - December 2021 we sent 1 partner search..
Year(s) Of Engagement Activity 2021
 
Description NBIC Partner Searches (September - December 2020) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On behalf of individual academic and industrial partners we sent emails to our network a) outlining projects or initiatives and b) asking for potential collaborators to respond. We then connected the individuals concerned such that further discussion could take place for further collaborative work. As a result of these communications we made connections for the following companies:
Cleanity
Virustatic Shield
Year(s) Of Engagement Activity 2020
 
Description NBIC PhD/postdoc talk: Utilising Metagenomics in early to late-stage R&D 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/event/metagenomics/
 
Description NBIC Public Engagement and Outreach: why and how? 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact NBIC in house training on public outreach and engagement lead by JC Denis. This event took place on 23/09/2020 with 22 delegates in attendance.
Year(s) Of Engagement Activity 2020
 
Description NBIC Research Partner Meeting (16/02/2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 16/02/2021.
Delegates: 82.
Each NBIC research partner institution was asked to nominate two representatives to attend this online event. During this time we provided an update on NBIC activities and progress and showcase up to three of our Proof Of Concept Projects from our Project calls to date.
Agenda
• NBIC Update - 45 minutes with Q&A
• POC Showcases - 60 minutes with Q&A
This meeting included representation from 49 NBIC partner research institutions.
Year(s) Of Engagement Activity 2021
URL https://www.youtube.com/watch?v=-sKNDuaFfCQ&feature=youtu.be
 
Description NBIC Research Partner Meeting (23/11/2021) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Delegates: 58
This was an opportunity for the NBIC community to review progress, successes, and challenges since our formation in December 2017, and to discuss how the UK biofilm community can continue to leverage its strength. This meeting has two main goals we hope to achieve with your help:
• Firstly for the whole NBIC community to review progress (successes and challenges) against the original NBIC goals set by the funders and ourselves since our formation in December 2017.
• Secondly, we wish to seek your input on guiding NBICs future direction and how we can best help grow further Biofilm research, translation and education in the UK. We will provide further details ahead of the meeting later.
Webpage password: partner21
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/watch-nbic-research-partner-meeting-2021/?utm_medium=email&_hsmi=2&_hsenc...
 
Description NBIC SCELSE Drinking water systems and alternative water resources (webinar 1) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Bringing together academics and industry members from both countries, this water webinar series aims to address problems relating to the water cycle, from source to tap, and expound on the innovations that have been developed to combat these issues.

In the first of three 'R&D and Innovation in the Water Sector' webinars, this webinar will focus on biofilms in the water distribution systems and membrane development for reverse osmosis (RO).

This is a joint event from the National Biofilms Innovation Centre (NBIC), Singapore National Biofilm Consortium (SNBC), Singapore Membrane Consortium (SGMEM) and Singapore Centre for Environmental Life Sciences Engineering (SCELSE).

Who should attend?
Academic and water industry members from both Singapore and the UK, also industry members who are interested in translating their technology into the water sector and wish to learn more about the problems they face and what any potential solution would have to look like.

Why attend?
This event will give a snapshot into the issues caused by biofilms in water distribution and the research that has been carried out to combat them. There will be opportunities to ask the speakers questions and follow up with additional networking after the event. The second webinar of this series will focus on wastewater treatment, while the third will be on reservoir management. Attendance of all three events will give a good level of understanding to those new to the sector.

Benefits
Delegates will:
• Understand how research & innovation in the water sector is evolving in both UK and Singapore;
• Identify strengths and weakness in their products / research;
• Network with leading academics and industry members.

Speakers
Stuart Knott, Innovation project manager at Anglian Water. Title: An overview of biofilm issues in Anglian Water's water distribution systems.
Representative from Sheffield Water Centre (SWC) at the University of Sheffield. Title: An overview of SWC's biofilm research and how it can be applied in real world settings.
Dr Cheng Dan, Senior Research Fellow at SCELSE. Title: Monitoring and managing biofilms in water distribution networks.
Dr Wang Rong, Director at the Nanyang Environment And Water Research Institute (NEWRI). Title: Development of novel biomimetic RO hollow fibre membranes without aquaporin - from lab study toward commercialization."
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/event/drinking-water-distribution-systems-and-alternative-water-resources...
 
Description NBIC SCELSE Reservoir and storm water management (webinar 3) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact Date: 28/10/21
Delegates: 55
Bringing together academics and industry members from the UK and Singapore, the 'R&D and Innovation in the Water Sector' webinar series aims to address problems relating to the water cycle, from source to tap, and expand on the innovations that have been developed to combat these issues.
This is a joint series from the National Biofilms Innovation Centre (NBIC), Singapore National Biofilm Consortium (SNBC), Singapore Membrane Consortium (SGMEM) and Singapore Centre for Environmental Life Sciences Engineering (SCELSE).
The third and final webinar in this series focused on managing emerging pollutants, and other innovations in reservoir and stormwater management.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/water-cycle-reservoir-and-stormwater-management?utm_medium=email&_hsmi=17...
 
Description NBIC SCELSE Wastewater treatment and distribution (webinar 2) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact Date: 12/10/21
Delegates: 84
Bringing together academics and industry members from the UK and Singapore, the 'R&D and Innovation in the Water Sector' webinar series aims to address problems relating to the water cycle, from source to tap, and expand on the innovations that have been developed to combat these issues.
This is a joint series from the National Biofilms Innovation Centre (NBIC), Singapore National Biofilm Consortium (SNBC), Singapore Membrane Consortium (SGMEM) and Singapore Centre for Environmental Life Sciences Engineering (SCELSE).
The second webinar focused on tackling industrial and greasy wastewater and also using ecological theory to evaluate microbial process performance. Additionally, we considered innovations in wastewater treatment.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/watch-innovation-in-wastewater-treatment-webinar/?utm_medium=email&_hsmi=...
 
Description NBIC Secure 180K from BBSRC for FTMA3 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/nbic-ftma3/
 
Description NBIC Skin Health and Mental Health Wellbeing 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Delegates: 22
Date: 27/05/22
The purpose is to facilitate sharing and further developing the emerging expertise in this area in a cross-functional approach. This would be the first step towards generating translatable solutions to address industry, clinical and patient/consumer needs. It would be my pleasure to invite you to this multi-disciplinary academic workshop.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/skin-health-mental-wellbeing-project/
 
Description NBIC Software Sustainability Workshop - 28 November 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact The 2019 National Biofilms Innovation Centre workshop brought together 20 attendees from seven UK universities, plus Unilever, in a hi-tech but cosy space at the Malmaison in the heart of Birmingham.

The National Biofilms Innovation Centre (NBIC) is a national Innovation Knowledge Centre, established in 2017, with a remit to link, support and catalyse research into biofilms. We ran this event alongside the Software Sustainability Institute in a bid to raise awareness of the need for sustainability in software, particularly when it comes to the potential risks to software reproducibility. This had become particularly apparent when reading the responses from the biofilms community to a BBRSC (Biotechnology and Biological Sciences Research Council) consultation on data intensive bioscience in the summer of 2019

We were very lucky to get help from the Institute. Having discussed the responses to the consultation, we agreed to run a joint workshop to spread some best practice, and to help both organisations get an idea of how things stood in UK biofilms research and software.

The event was held on 28 November and involved four breakout sessions and short talks throughout the day. There was lots of time to reflect and to network in coffee and lunch breaks, and attendees and facilitators mixed freely - helped no doubt by the caffeine and snacks provided throughout.

The day's sessions introduced participants to the idea of software sustainability, to how to achieve software that is accessible and reproducible, and to how software sustainability helps to drive data management, accessibility and reuse.

Speakers had to take into account the broad range of experience in the room, with attendees ranging from microbiologists who work in Excel to physicists coding agent-based simulations in C.

Breakout group responses were captured on flipcharts, which are currently being transcribed, and on online forms. In some exercises the participants self-reflected on their own practice, and these thoughts will be sent to them later by email.

It was a successful day for both the NBIC and the Institute, and feedback from attendees has been positive. One call to action was to build "a platform to ask question, find resources, and share training information". We are exploring this possibility by using platforms available across our partner universities.

Attendees came away with a range of techniques and best-practice tips to improve the sustainability of their research software including simple things such as organising computer folders for each project so that data, analyses and outputs are separated, with plain text files describing each analysis with brief details of when and why it was carried out, and by whom.

The event was an experiment, but it appears there is a place for an annual meeting in this area. Next year's event is expected to focus on training on software and data carpentry for doctoral students and high-career researchers.
Year(s) Of Engagement Activity 2019
URL https://software.ac.uk/blog/2019-12-16-2019-national-biofilms-innovation-centre-workshop
 
Description NBIC Summit and ISAB 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Delegates: 76
Dates: 14-16/06/22
A 2 day event bringing together researchers and operations staff from the four core NBIC research institutions with our three governance boards for the purpose of discussing our progress, future plans and the science being undertaken by those involved.
Year(s) Of Engagement Activity 2022
 
Description NBIC Summit and ISAB 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact On 20 May 2019 the National Biofilm Innovation Centre (NBIC) undertook its first NBIC Summit. This meeting was held at the Royal Society and gave the International Scientific Advisory Board a first chance to meet to see presentations on the strategy and work of NBIC including a talk from Prof Leighton on a selection of NAMRIP's biofilm-related projects.
Year(s) Of Engagement Activity 2019
URL https://www.southampton.ac.uk/namrip/news/2019/05/tim-nbic-summit.page?
 
Description NBIC Twitter and LinkedIn communication update 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact NBIC has setup Twitter and LinedIn account as social media outlet to communicate with our academic and industrial audience. We have managed to engage around 400 active followers who are researchers, stakeholders from both UK and international community. We expect the quality followers to increase beyond 500 in 2019.
Year(s) Of Engagement Activity 2018,2019
 
Description NBIC Twitter channel 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 495 new followers, 2,665 engagements, 831 referrals to the NBIC website, 67,884 visits to the NBIC Twitter page
Year(s) Of Engagement Activity 2021,2022
URL https://twitter.com/ukbiofilms
 
Description NBIC Twitter channel (April - June 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 90 new followers, 1,286 engagements, 117 referrals to the NBIC website, 16,905 visits to the NBIC Twitter page.
Year(s) Of Engagement Activity 2022
URL https://twitter.com/ukbiofilms
 
Description NBIC Twitter channel (January - March 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 104 new followers, 2,165 engagements, 289 referrals to the NBIC website, 16,235 visits to the NBIC Twitter page.
Year(s) Of Engagement Activity 2022
URL https://twitter.com/ukbiofilms
 
Description NBIC Twitter channel (October - December 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact 127 new followers, 1,443 engagements, 250 referrals to the NBIC website, 14,510 visits to the NBIC Twitter page.
Year(s) Of Engagement Activity 2021
URL https://twitter.com/ukbiofilms
 
Description NBIC Twitter channel activity (April - June 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 194 new followers, 4,623 engagements, 587 referrals to the NBIC website, 21,933 visits to the NBIC Twitter page
Year(s) Of Engagement Activity 2021
URL https://twitter.com/ukbiofilms
 
Description NBIC Twitter channel activity (January - March 2021) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 265 new followers, 5,628 engagements, 988 referrals to the NBIC website, 18073 visits to the NBIC Twitter page.
Year(s) Of Engagement Activity 2021
URL https://twitter.com/ukbiofilms
 
Description NBIC Twitter channel activity (July - September 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact 165 new followers, 2,094 engagements, 379 referrals to the NBIC website, 24,848 visits to the NBIC Twitter page.
Year(s) Of Engagement Activity 2021
URL https://twitter.com/ukbiofilms
 
Description NBIC Twitter channel activity (October - December 2020) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 865 new followers, which is an 85% increase since Jan 2020.
22,685 engagements, 4,049 referrals to the NBIC website, 1,134 tagged mentions of NBIC, 13,917 visits to the NBIC Twitter page
Year(s) Of Engagement Activity 2020
URL https://twitter.com/ukbiofilms
 
Description NBIC and Argentina Partnering Workshop 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact we organised a workshop in Argentina (funded by BBSRC to NBIC) to identify priority areas of collaboration between the two countries on the impact of biofilms in agriculture which can have a significant impact on economic growth. We brought together researchers and representatives from industry and government bodies from both countries. This meeting was also facilitated by the Argentinian Society for Microbiology (SAMIGE). During this meeting we identified 3 key priority areas addressing key unmet needs in Agriculture and showing a real synergism between the two countries.
Year(s) Of Engagement Activity 2022
 
Description NBIC and India Biofilms Society Symposium (meeting 1) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 05/09/20
Delegates: 47
NBIC and IBS joint research symposiums between 3 UK biofilm researchers from the NBIC academic community, and 3 from the newly formed India Biofilms Society. Speakers were each asked to give a 10-minute presentation providing an overview of their areas and expertise.
Karishma Kaushik - Savitribai Phule Pune University, Pune, India. Human-relevant approaches to biofilm infection states.
Deepti Jain - Regional Centre for Biotechnology, Faridabad, India. Transcription Regulation of biofilm gene expression in Pseudomonas aeruginosa.
Ankita Pagedar Singh - A D Patel Institute of Technology, Anand, India. Efficacy of DNase to prevent and eradicate biofilms formed by pathogens.
Esther Karunakaran - University of Sheffield, UK. SCARAB: in vitro and ex vivo models of biofilms.
Naveen Kumar Devanga Ragupathi - University of Sheffield, UK. The missing link between antimicrobial resistance and biofilms.
Sourav Ghosh - Loughborough University, UK. Rapid point-of-care phenotypic detection of bacteria and antimicrobial sensitivity.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/watch-nbic-and-india-biofilms-society-symposiums/
 
Description NBIC and India Biofilms Society Symposium (meeting 2) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 12/09/20
Delegates: 45
NBIC and IBS joint research symposiums between 3 UK biofilm researchers from the NBIC academic community, and 3 from the newly formed India Biofilms Society. Speakers were each asked to give a 10-minute presentation providing an overview of their areas and expertise.
Gavin Melaugh - University of Edinburgh, UK. The soft matter physics of biofilms.
Campbell Gourlay - University of Kent, UK. Detection and treatment of fungal biofilms on medical implants.
Miraz Rahman - King's College London, UK. Development of new anti-biofilm agents through repurposing of existing licensed drugs.
Ashwini Chauhan - Tripura University, Agartala, India. Central Venous Catheter-associated biofilms: Eradication strategies.
Neha Jain - Indian Institute of Technology, Jodhpur, India. Fighting Fire with Fire: Novel strategies to combat biofilm infections.
Sriram Varhan - Institute of Stem Cell Science and Regenerative Medicine, Bangalore, India. Metabolite plasticity drives the emergence of specialised cell states in isogenic yeast biofilms.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/watch-nbic-and-india-biofilms-society-symposiums/
 
Description NBIC and India Biofilms Society Symposium (meeting 3) 13/02/2021 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 13/02/21.
Delegates: 32.

We have recently connected with the newly formed India Biofilm Society with the goal of better connecting the UK and India biofilms communities. We're pleased to report that our first series of joint NBIC and India Biofilms Society symposiums took place in September and were a complete success. We saw an amazing diversity of work and many opportunities for collaborations. You can watch the full meetings here if you were unable to attend originally.

Following on from the success of our last series, we will be holding another webinar from 10:30am - 12:00pm, UK time, on Saturday 13 February 2021.

Our goal is to find ways to connect and link the two research communities' for mutual benefit and in order to explore possible collaborations and joint grant applications between researchers. There will be a series of 10-minute presentations from both India and UK based scientists - each providing an overview of their areas and expertise.
NBIC and IBS joint research symposiums between 3 UK biofilm researchers from the NBIC academic community, and 3 from the newly formed India Biofilms Society. Speakers were each asked to give a 10-minute presentation providing an overview of their areas and expertise.
Schedule (times tbc)
The role and control of the alternative oxidase in Candida biofilm formation - Anthony Moore, University of Sussex
Understanding and harnessing bacterial population behaviours - Chien-Yi Chang, Newcastle University
Development and testing of 3D printed biofilm bioreactors for biotransformation reactions - Selva M Athi Narayanan, University of Edinburgh
Marine Biofilms on Manmade Surfaces - Maria Salta, University of Portsmouth
Survival games that biofilm cells play - Chakravarthy Srinandan, SASTRA Deemed University, Thanjavur, Tamil Nadu, India
Biofilms and Antimicrobial resistance in enteric pathogens - Vijaya Kumar Deekshit, Nitte University Centre for Science Education and Research, Mangaluru
Riverine environmental biofilms as a tool to river health monitoring: A case from global biodiversity hotspots - Karthick Balasubramanian, Agharkar Research Institute
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/event/nbic-and-india-bioifilms-society-symposium/
 
Description NBIC and SfAM Microbes and Biofilms in the Food Industry (2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 04/02/2021.
Delegates: 284.
We are excited to be hosting a webinar with the Society for Applied Microbiology (SfAM) titled 'Microbes and Biofilms in the Food Industry' which will take place on Thursday 4 February from 10am - 4pm.

The webinar will include a series of talks from industry professionals and academics discussing the challenges facing the food industry in managing microbes & biofilms and the evolving regulatory context of achieving microbial control using interventional approaches.

There will be 8 UK and international speakers from industry and academia, including speakers from Campden BRI, Center for Biofilm Engineering (US), Diamond Pet Foods (US), Kersia, Chilled Food Association, APC Microbiome Ireland, Cardiff University and the USDA. The full speaker list, including timings and subjects are given below.

Who will be interested in the event?
This should be of interested to anyone working in either the production of food or in researching/controlling the role that microbes and biofilms play in the whole food chain.

Schedule
10:00 - Introduction from Dr Mark Richardson, CEO NBIC and Prof Brendan Gilmore, Queen's University Belfast and President of SfAM.
10:05 - 'Food Hygiene Biocides - Regulation and Reality' from Karin Goodburn MBE, Director General, Chilled Food Association.
10:40 - 'Drawing back the veil: a metagenomic study of species diversity in UK food industry biofilms' from Rob Limburn. Heat Resistance & Decontamination Group Manager, Campden BRI.
11:15 - 'Control of Listeria and Salmonella 'biofilms' in the Food Chain' from Dr John Holah, Principal Corporate Scientist: Food Safety & Public Health, Kersia.
11:50 - 'Food and the microbiome; from farm to colon' from Prof Colin Hill, Principal Investigator, APC Microbiome.
12:25 - 'CIELs engagement in microbial control within the food supply chain' from Lyndsay Chapman, CEO, Centre for Innovation Excellence in Livestock (CIEL).
12:40 - 13:30 Lunch
13:30 - 'Beware of Dry surface biofilms: implications for the food processing environment' from Prof Jean-Yves Maillard, Professor of Pharmaceutical Microbiology, Cardiff University.
14:05 - 'Cold plasma as a novel nonthermal control process for foodborne pathogen biofilms' from Dr Brendan Niemira, Research Leader, USDA Agricultural Research Service.
14:40 - 'Evaluation of the effect of Chlorine Dioxide gas and a liquid probiotic application on hydrated and dehydrated biofilms' from Dr Michele Sayles, Executive Director, Food Safety & Quality, Diamond Pet Food.
15:15 - 'US EPA regulatory guidance: the path to anti-biofilm products in the marketplace' from Darla Goeres. Research Professor of Regulatory Science, Center For Biofilm Engineering.
15:50 - Final wrap up.
16:00 - Webinar ends.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/event/microbes-and-biofilms-in-the-food-industry/
 
Description NBIC to Present at ACI Skin Microbiome Industry Summit 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/aci-skin-microbiome-industry-summit/
 
Description NBIC website 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 61,904 page views, 10,987 visitors, 10,779 new visitors, average of 3 pages viewed per visit, average visit is 2 minutes
Year(s) Of Engagement Activity 2021,2022
URL https://www.biofilms.ac.uk
 
Description NBIC website activity (April - June 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 31,891 page views, 6,335 visitors, 5,888 new visitors, average of 3 pages viewed per visit, average visit is 2 mins.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk
 
Description NBIC website activity (April - June 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 14,489 page views, 2,362 visitors, 2,059 new visitors, average of 4 pages viewed per visit, average visit is 2 minutes.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk
 
Description NBIC website activity (January - March 2021) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 44,322 page views, 8,470 visitors, 8,081 new visitors, average of 3 pages viewed per visit, average visit is 2 mins.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk
 
Description NBIC website activity (January - March 2022) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 13,675 page views, 2,102 visitors, 1,993 new visitors, average of 4 pages viewed per visit, average visit is 2.5 minutes.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk
 
Description NBIC website activity (July - September 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 13,904 page views, 2,364 visitors, 2,118 new visitors, average of 4 pages viewed per visit, average visit is 2 mins.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk
 
Description NBIC website activity (October - December 2020) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 130,984 page views, 20,341 visitors, 20,149 new visitors (82% of traffic to our website this year was from new visitors), average of 4 pages viewed per visit, average visit is 2 mins,
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk
 
Description NBIC website activity (October - December 2021) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 10,644 page views, 1,265 visitors, 1,165 new visitors, average of 4 pages viewed per visit, average visit is 3 minutes.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk
 
Description NBIC-ECFP Wastewater workshop 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Wastewater treatment (WWT) is arguably the most important biotechnological process in world. The science behind WWT is well-established and has been in use for more than 100 years, yet unexplained and costly failures happen regularly and unpredictably. With increasing public awareness, and regulatory and sustainability pressures, plus the threat of rising sea levels on coastal WWT plants, the sector is at a crossroads, requiring an injection of fundamental understanding in order drive disruptive innovation.

This Edinburgh Complex Fluids Partnership (ECFP) event, run in collaboration with NBIC, brought together industry practitioners, interdisciplinary academics and regulatory professionals to discuss sectoral challenges and strategic objectives towards improving efficiency, minimising environmental impacts, and enhancing public perception. The aim of the event was to increase awareness of how soft matter and biological physics could be applied in WWT and to identify joint problems across industry, academia and regulators that could be worked on together.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/ecfp-nbic-wastewater-treatment-event-2022/
 
Description NBIC-SCELSE Bioaerosol Characterisation, the Air Microbiome and Covid-19 Transmission (25/05/2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 25/05/2021
Delegates: 119
Join us for the second in a series of webinars looking at the challenges and opportunities offered by studying, managing and influencing the air microbiome. This webinar is hosted by the National Biofilms Innovation Centre (NBIC), Singapore Centre for Environmental Life Sciences Engineering (SCELSE) and Singapore National Biofilm Consortium (SNBC). This webinar will be of interest to researchers, companies and regulators involved in either studying or directly influencing and intervening in the air microbiome in different contexts and climatic conditions. There will be presentations on a number of aspects of, bioaerosols and the air microbiome and their impact on public health, from the UK and Singapore. Beyond scientific sharings, members of the Singapore COVID-19 Cleaning and Disinfectant Industry Task Force will be on hand to share their practical experiences and advice in usage of surface disinfectants during this pandemic. Your questions can be answered during the Q&A session.
Year(s) Of Engagement Activity 2021
URL https://air-microbiome-2.eventbrite.co.uk/
 
Description NBIC-SCELSE Studying and Controlling the Microbiome of the Air Webinar (09/03/21) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 09/03/2021.
Delegates: 97.
This is the latest in the joint webinar series from National Biofilms Innovation Centre (NBIC), Singapore Centre for Environmental Life Sciences Engineering (SCELSE) and Singapore National Biofilm Consortium (SNBC). This webinar 'Studying and Controlling the Microbiome of the Air' will address the emerging area of the microbiome of the air and how to investigate and control this environment.

It is increasingly recognised that the air is not just a space though which organisms are transmitted but that it has its own population dependent on location and environment. Our speakers will consider approaches to investigating the air and controlling its microbial composition.

Who is this webinar for?
This will be of interest to anyone in industry and academia with an interest in transmission of bacteria and viruses in both outdoor and built environment and what the evidence is starting to tell us about this field and the future work that is needed.

Speakers
We have four speakers from the UK and Singapore, giving 15-minute overviews of their work or business:
Prof Stephan Schuster - Deputy Centre Director (Facilities & Capacities); Research Director (Meta-'omics & Microbiomes), Professor, School of Biological Sciences, NTU, Singapore
Dr Angela Sherry - VC Senior Fellow in the Hub for Biotechnology in the Built Environment (HBBE) at Northumbria University UK
Dr Irvan Luhung - Research Fellow, Meta-'omics & Microbiomes cluster, SCELSE, Singapore
Richard Thomas - Managing Director, Citrox Biosciences Ltd, UK
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/event/webinar-air-microbiome/
 
Description NBIC: Realising our potential (Mark Richardson) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/nbic-realising-our-potential/
 
Description Nanosciences@Surfaces Summer School, IOP, Liverpool 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Students participated in a 3-day Summer School covering the fundamentals and applications of Surface Science techniques for probing molecular interactions and manipulation of surfaces at the nanoscale. Techniques included: Scanning Probe and Electron Microscopies, Electron and Optical Spectroscopies, Surface Structure from Diffraction Techniques and the Modelling of Surfaces and Adsorption on Surfaces. These can be applied to study of surfaces of strongly correlated materials, surface and thin-film magnetism, bio-interfaces, atmospheric sciences, astrochemistry, battery science and electrochemistry and catalysis.
Year(s) Of Engagement Activity 2022
URL https://iop.eventsair.com/nsss2022/
 
Description Native Scientists (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact Biofilm activities for Portuguese speakers.
Year(s) Of Engagement Activity 2020
 
Description Networking Delegation to South Korea (Jeremy Webb, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Delegates: 150
Dates: 03/06-09/06/2022
Invited speaker. Seung Seo Lee, University of Southampton, has been awarded a UK Global Partnership Fund grant to support networking activities with their partner in South Korea, Dr Choong-Min Ryu, the head of the Infectious Disease Research Center under the Korea Research Institute of Bioscience and Biotechnology. They have invited me to join a delegation to South Korea 3-9 June 2022. I will be presenting on the topic of Novel strategies for the control of biofilm-associated AMR and also have the opportunity to network with a number of the infectious disease experts of South Korea. We will visit a number of institutions and the trip includes the following:
7 June: Symposium, Daejeon Convention Center
8 June: mini symposium, Sunkyunkwan University School of Medicine & Institute for Antimicrobial Resistance Research & Therapeutics. http://www.skkumed.ac.kr/eng/ and https://iamrt.skku.edu/iamrt/index.jsp
Year(s) Of Engagement Activity 2022
 
Description New Generation Coatings with Intrinsic Antimicrobial Action (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact NBIC case study.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/coatings-antimicrobial-action/
 
Description New Scientist Live event 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact We delivered biofilms engagement activities as part of a 3 days event in London, one day being open to school pupils only, the other days to the public.
The delivery team was made of 12 staff and PhD students.
We engaged with more than 1400 visitors and had many long conversations about our research.
However the biggest impact was on our team. It enabled us to get team members much closer, give them an intense experience of public engagement, and train our PhD students with public engagement and motivate and enthuse all of us.
Year(s) Of Engagement Activity 2022
URL https://live.newscientist.com/
 
Description New method to promote biofilm formation and increase efficiency of biocatalysis 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on the NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/method-to-increase-efficiency-in-biocatalysis/
 
Description Newspaper article Scotsman 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact Microbes: Greater understanding of how tiny life forms work together could lead to remarkable scientific breakthroughs was an article published in The Scotsman.
Year(s) Of Engagement Activity 2022
URL https://discovery.dundee.ac.uk/en/activities/microbes-greater-understanding-of-how-tiny-life-forms-w...
 
Description Next Generation Wound Treatment (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC funded project.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/next-generation-wound-treatment/
 
Description Nottingham Fesitival of Science and Curiosity 2020 (Shaun Robertson and Morgan Alexander) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact Stand at a local library to share research as part of a city wide festival of science.
Year(s) Of Engagement Activity 2020
URL https://www.nottingham.ac.uk/currentstudents/news/nottingham-festival-of-science-and-curiosity-2020
 
Description Nottingham Festival of Science and Curiosity 2019 (Shaun Robertson) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact Lead delivery of an activity at the Nottingham festival of Science and Curiosity titled 'The good, the bad and the ugly of biofilms'. This activity involved young children learning what microbes were and how they often live as communities called biofilms. Interactive activities provided were: build your own microbe from modelling clay, spot the difference on plant pathogen infected potato slices (shows biofilm formation in later days), colouring activities, giant microbes themed around topics of conversation e.g. teeth and dental biofilms and the importance of brushing teeth to disrupt these communities and demonstration of a flow cell model.
Year(s) Of Engagement Activity 2019
URL https://www.ntu.ac.uk/about-us/news/news-articles/2019/02/nottingham-festival-of-science-and-curiosi...
 
Description Nottingham Festival of Science and Curiosity 2021 (Shaun Robertson) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact Lead delivery of an activity at the Nottingham festival of Science and Curiosity titled 'The good, the bad and the ugly of biofilms'. This activity involved young children learning what microbes were and how they often live as communities called biofilms. Interactive activities provided were: build your own microbe from modelling clay, spot the difference on plant pathogen infected potato slices (shows biofilm formation in later days), coloring activities, giant microbes themed around topics of conversation e.g. teeth and dental biofilms and the importance of brushing teeth to disrupt these communities and demonstration of a flow cell model.
Year(s) Of Engagement Activity 2021
URL https://nottsfosac.co.uk/2021-festival/
 
Description One Health 2021: Big ideas in One Health Commercial Solutions to Global Problems (Keynote speaker: Jo-Slater Jefferies) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 24/03/21.
Delegates: 75.
Keynote speaker: Jeremy Webb
The conference will explain the concept of One Health and present business innovations key to a successful green economy in Dorset and beyond. This year's event will also launch the One Health Nucleus.

Keynotes include: Innovate UK, National Biofilms Innovation Centre and the Department for International Trade. Companies which will showcase their innovations include: Galago/Ramboll, Royal Academy of Engineering Industry International Fellows, AgriChat, Cropdesk and Wessex Internet.

Full event details and link to sign up are now available: https://bit.ly/2MRFsfK
Year(s) Of Engagement Activity 2021
URL https://www.dorsetlep.co.uk/news-article/one-health-conference-2021--big-ideas-in-one-health
 
Description One Health 2022 Conference (Jo Slater-Jefferies) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Industry/Business
Results and Impact Dorset LEP's fourth national One Health conference, One Health 22: Sustainable Agri-innovation and Foodtech, brought more than 60 senior decision makers from academia, industry, and government together for a day of advice, knowledge sharing and planning.
Year(s) Of Engagement Activity 2022
URL https://www.dorsetlep.co.uk/one-health
 
Description Online SfAM magazine December 2020 edition (NBIC article) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact A written double page feature in the Microbiologist magazine on NBIC, highlighting our mission, growth, and future plans.
Year(s) Of Engagement Activity 2020
URL https://sfam.org.uk/knowledge/microbiologist-magazine.html
 
Description Open Innovation for SMEs in the Personal Care Sector (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/innovation-in-skin-microbiome-diversity/
 
Description Oral Care Innovation: Hygiene and consumer behaviour (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/oral-care-innovation-hygiene-and-consumer-behaviour/
 
Description Oral Care Innovation: Toothpastes and Biofilms (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/oral-care-innovation-toothpaste-and-biofilms/
 
Description POST Thematic Research Lead Pilot Positions 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/post-thematic-research-lead/
 
Description PRESENTATION TITLE: Complexity of the quorum sensing signalling systems and their exploitation as a therapeutic target. 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Postgraduate students
Results and Impact This was a research seminar at the University of Quilmes in Buenos Aires (Argentina). It was attended by a mixed audience including academics etc and the seminar recorded for a wider audience. Further discussions took place after the meeting which have resulted in new collaborations.
Year(s) Of Engagement Activity 2019
URL https://www.youtube.com/watch?v=RmvJT8OnCYg&feature=youtu.be
 
Description Panel for the Future of Science and Technology - Health and economic benefits of microbiomes. WebStream. 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Date: 11/05/2021
Delegates: 350
In recent years, a lot of scientific knowledge has made its way to the greater public, raising interest in the human microbiomes, which are mostly understood as the universe of gut bacteria that determine our health status and wellbeing, as well as our immune and hormonal systems. The microbiomes are key players to many natural processes in agriculture, food and drinking systems, waste degradation, recycling, and the creation of new materials. Besides the production of healthier, and more natural and sustainable foods, innovations involving microbiomes can already be seen in agriculture and crop production, for example in plant protection through bio-pesticides or in climate-friendly waste degradation systems reusing and recycling materials and energy. Many exciting microbiome-related scientific discoveries and innovations in microbiological and microbial systems can be expected in the coming decades, which may help to address challenges in human health, sustainable food production, biodiversity, and climate change.

The STOA workshop is organised in two sessions: the first will discusses the clinical implications of microbiomes, whilst the second will analyse the economic and regulatory aspects of microbiomes.
Year(s) Of Engagement Activity 2021
URL https://multimedia.europarl.europa.eu/en/panel-for-future-of-science-and-technology-health-and-econo...
 
Description Participating in microbiology training courses at University of Nottingham (Xinyi Zhu) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Postgraduate students
Results and Impact This activity involved attending the microbiology course, as well as learning some Industry work. Around 20 people took part, with most of them being PhD students in chemistry, biology and physics.
Year(s) Of Engagement Activity 2022
 
Description Participation in Biofilm Engineering Workshop, Edinburgh International Conference Center, 30th April 2019 (The University of Sheffield, Isabel Doutelero) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Study participants or study members
Results and Impact Workshop organized by the National Biofilm Center (NBIC/BBSRC) to discuss national research on biofilms.
Year(s) Of Engagement Activity 2019
URL https://www.biofilms.ac.uk/biofilm-engineering-workshop-highlights/
 
Description Participation in Industry / Academia / Government Workshop on Modelling of Cleaning and Decontamination (ModCaD) leading to a roadmap report 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Please see www.modcad.org

The intended purpose was to quantify the need across practically all sectors of the economy for quantitative modelling of cleaning and decontamination to inform best practise in this highly multidisciplinary sector, underpin innovation (particularly with scientific and engineering based design), and address new challenges such as sustainability, risk, diversity, networking, training, sensors and supporting sciences. From that quantification, the workshop developed a roadmap to tackle strateic investment in communication, community, training and features of the sceince base.
From the point of view of nbic and my feasibility study, my contribution to the roadmap was to highlight the innovations explored with biofilm removal, the need for further development work under conditions appropriate for endusers, and engineering science based modelling for design and understanding of fundamental mechanisms. A similar effort was extended to plasma activated microbubbles to underscore its potential and needs for development.
Year(s) Of Engagement Activity 2021
URL http://www.modcad.org
 
Description Participation in an International Panel on Innovation - to assess projects for Pitt University USA (Mark Richardon) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Participation in an International Panel on Innovation - to assess projects for Pitt University USA - involved reviewing three innovation project submissions and discussing them with a panel reviewers to make decision on project funding.
Year(s) Of Engagement Activity 2022
 
Description Partner search for SYMCEL: calScreener 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact We were approached by Symcel with a request for us to assist them in finding an academic partner to test their calScreener product. We assisted in designing a questionnaire and contacting our network of academics to find a suitable match.
Year(s) Of Engagement Activity 2020
 
Description Plant Science (Tayport) (Nicola Stanley-Wall) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact We initiated a citizen science project with a local community garden organisation. We had multiple interactions with the volunteers at PLANT and we also ran two events where members of the public were encouraged to bring soil and isolate spore forming bacteria called Bacillus subtilis. We have used these strains in our research.
Year(s) Of Engagement Activity 2017
URL https://tayportgarden.org/2017/06/20/summer-plant-science-everyone/
 
Description Poster at the 32nd European Congress of Clinical Microbiology & Infectious Diseases (Mohamed El Mohtadi) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact I have presented my fellowship-related research findings at the 32nd European Congress of Clinical Microbiology & Infectious Diseases (Lisbon, Portugal on 23 - 26 April 2022). ECCMID is labelled as the world's premier Clinical Microbiology & Infectious Diseases event, which was attended by an audience of over 14,000 colleagues from National and International institutions.
Year(s) Of Engagement Activity 2022
 
Description Poster presentation at University of Nottingham (Charlotte May) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Poster presentation on 26/07/2019 on the topic of Impact of RsmA, ToxR and BifA on c-di-GMP-mediated regulation of motility in Pseudomonas aeruginosa.
Year(s) Of Engagement Activity 2019
 
Description Poster presentation at University of Nottingham (Fadi Soukarieh) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Poster presentation on 21/08/2019 on the topic of Design, Synthesis and Evaluation of Novel PqsR Inhibitors as Adjuvant Therapy to Treat Pseudomonas aeruginosa Infections.
Year(s) Of Engagement Activity 2019
 
Description Power-FULL Biofilms (Pavlina Theodosiou) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Power-FULL Biofilms intents to bring to schools an interactive workshop which will enthuse, inspire, and engage children with the world of Microbial Fuel Cells (MFCs). MFCs turn organic matter or waste into electricity through electroactive biofilms, that as part of their metabolism release electrons. The project investigates the possibility of producing electricity from waste (mud from the school ground) and using the harnessed electricity to power a small gadget. The students during this 5-week workshop series will build their own MFCs, inoculate them using mud, feed them with nutrients and monitor their growth by recording their voltage output. At the end of the 5-weeks the students will connect the MFCs electrically and see if they can power-up a small gadget. This workshop series will introduce the kids to microbiology, biofilm growth, electricity, engineering, renewable energy and experimental design. This workshop can be both delivered inside and outside the classroom, to comply with COVID restrictions with the assistance of the lead applicant and student ambassadors. Schools now are lacking enrichment activities, so this project is very timely. Power-FULL Biofilms is a hands-on workshop series accompanied by weekly interactive presentation sessions which will encourage the children to think scientifically about problem solving.
Year(s) Of Engagement Activity 2021
 
Description Presentation at University of Nottingham: Micro-scale topographies instruct bacterial attachment to surfaces (Charlotte May) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Presentation.
Year(s) Of Engagement Activity 2019
 
Description Presentation of the outcomes from 'Biofilms in Agriculture' workshop as part of NBIC international strategy 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Third sector organisations
Results and Impact Miguel Camara met with Professor Sir Robin Grimes (Foreign Secretary, Royal Society), Ian Wiggins (Director of International, Royal Society), Susie Kitchens (Deputy Director Global Research & Innovation, BEIS), Frances Wood (Director of International, UKRI) and Dr Paul Hollinshead OBE (Chief Executive, Defence Science and Technology Laboratory) to present on NBIC internaitonal strategy. The workshop in Argentina was discussed and the outcomes from the workshop presented, including identified priority areas in the use of biofilms in agriculture, where the international collaboration between the UK and Argentina could be beneficial.
The meeting was followed by further email exchanges and sharing the draft of a white paper, summarising findings and decisions from the workshop, ahead of the visit of a delegation from CONICET ( National Scientific and Technical Research Council is an Argentine) to the UK.
Year(s) Of Engagement Activity 2023
 
Description Presentation to India Biofilms Society about NBIC (Mark Richardson) 20/02/2021 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact Mark Richardson presented to IBS about NBIC.
Year(s) Of Engagement Activity 2021
 
Description Presentation to International Consortium called BARCOD about NBIC (Mark Richardson) 18/02/2021 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact An international workshop of those working on AMR led by India. MCR presented on NBIC and helped shape future research programme.
Year(s) Of Engagement Activity 2021
URL https://www.linkedin.com/in/naveenkumar-dr?originalSubdomain=in
 
Description Presentation: Innovations to Prevent & Treat Infectious Disease (Mark Richardson) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Presentation on the topic of Delivering innovations in the prevention, detection, management and engineering of biofilms to MSc students at University of Warwick on 07/05/2020.
Year(s) Of Engagement Activity 2020
 
Description Press release on reducing infection hazard from the consumption of salads by using technology of Sloan Water Technology Ltd.,, led to worldwide reporting including TV in USA 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Media (as a channel to the public)
Results and Impact Following publication of the journal paper on a collaboration, initiated by this grant, between Southampton University, Sloan Water Technology and Vitacress, the university put out a press release that was reported on in newspapers and online from USA to India, including a TV interview for USA. The work was on use of ultrasonic technology of Sloan Water Technology Ltd to reduce infection risk from, and shelf life of, salads for human consumption.
Year(s) Of Engagement Activity 2021
URL https://www.southampton.ac.uk/namrip/news/2021/03/salad-paper.page
 
Description Probiotics in Acne (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/probiotics-in-acne/
 
Description Prof Leighton talk at Thomas Hardye School, Dorset 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Schools
Results and Impact Professor Tim Leighton was invited to Thomas Hardye School to present a talk on research underway in Southampton into Antimicrobial Resistance. As part of the talk a collection of £542 was presented to Mary-Jane Butler for her charity Widows and Orphans in Rural Kenya. Mary-Jane is a member of the Global-NAMRIP Steering Group.
Year(s) Of Engagement Activity 2017
 
Description Promoting Biofilms in Personal Care (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact NBIC case study.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofilms-personal-care/
 
Description Promoting awareness of Nano Science and technology capabilities in preventing biofilm formation and bacterial growth (Shimyatech Ltd) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Shimyatech Ltd has designed training programs for promoting Nanoscience and Nanotechnology and their applications (i.e. Nano/Bio-Films) by offering educational course package comprised of workshops at two levels of fundamentals and advanced skills.
A successful programme was initiated on "NanoBiomaterials" in November 2019, and the new programme is aiming to extend our offering to a wider audience and with specific focus on "NanoFilms" and their applications in anti-biofilm surfaces. The first part of the programme will cover fundamentals and basic concepts of the subject preparing the learners for the second advanced and practice based stage.
Based on our initial experience and through some early market research we have identified younger generation, especially A-Level students to be a highly appealing group to engage with this line of science and technology. As such, we believe providing a number of sponsored places in our first workshop can provide a strong ground for public engagement and promote the missions and objectives of the NBIC network to the society. The proposal therefore will be for NBIC to sponsor places for six students to be offered to Liverpool region sixth-form institutions, which they may promote in their schools through an internal call and competition. We believe this award will induce a considerable level of awareness in the regional science education and helps attraction and development of future talents to industry and enterprising.
Year(s) Of Engagement Activity 2020
 
Description Prosthetic Joint Infection Meeting: Changing Paradigms and Modern Concepts (Paul Stoodley, invited speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Understanding the enemy: Biofilm Prosthetic Joint Infection and invited speaker Anti Biofilms and Bioactive matter. Prosthetic Joint Infection Meeting: Changing Paradigms and Modern Concepts, Central Hall Westminster, London. UK. Dec. 11th 2018.
Year(s) Of Engagement Activity 2018
 
Description Quorum Sensing Symposium (Miguel Camara, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Invited to give a plenary talk at the Quorum Sensing symposium organised in Germany.
Year(s) Of Engagement Activity 2022
 
Description RSC Biomaterials Chemistry Annual Conference 2019 (Rasmita Raval, Plenary Lecture) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Plenary lecture titled Biofilms: Biology Meets Surface Science.
Year(s) Of Engagement Activity 2019
URL https://www.rsc.org/events/detail/35364/rsc-biomate%20rials-chemistry-annual-conference-2019
 
Description RSE Curious 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact This was a public engagement event co-ordinated by the Royal Society of Edinburgh titled "Bacteria, the true rulers of the world". It was open to the general public and conducted as an "in conversation" event. We had 63 attendees in the end and a number of questions from the floor that sparked a discussion among the scientists.
Year(s) Of Engagement Activity 2021
 
Description Radio interview on chlorine washed chicken (Callum Highmore) 
Form Of Engagement Activity A broadcast e.g. TV/radio/film/podcast (other than news/press)
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact I was invited onto Three Counties Radio to give an expert opinion on the use of chlorine washed chicken, due to the possibility of its introduction into the UK market. The interview informed the public that chlorine washing chicken may produce viable but nonculturable pathogens that are more difficult to detect, compromising food safety in the UK.
Year(s) Of Engagement Activity 2021
 
Description Raman Against Respiratory Infection (Callum Highmore) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/raman-respiratory-infection/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz--Zfe...
 
Description Rapid Method Shown to Detect Infection in Cystic Fibrosis 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/rapid-method-shown-to-detect-infection-in-cystic-fibrosis/
 
Description Reducing Biofilm Formation (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC funded proof of concept project.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/reducing-biofilm-formation/
 
Description Research Council visit to NAMRIP projects and exhibit 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Supporters
Results and Impact NAMRIP welcomed 3 Research Council visitors to Southampton on 4th July, for a tour of our facilities and to meet those directly involved in Anti-Microbial Resistance (AMR) research.
Dr Jessica Boname is the Programme Manager for Bacteriology & AMR at the Medical Research Council, Dr Phil Packer the Innovation Lead for AMR & vaccines at Innovate UK, and Dr Stephen Webb the Strategy and Policy Manager for AMR at the Biotechnology and Biological Sciences Research Council. The visit included a trip to Winchester Science Centre to see the NAMRIP exhibit in action.
Year(s) Of Engagement Activity 2018
URL http://www.southampton.ac.uk/namrip/news/2018/07/4-research-council-tour.page
 
Description Research featured in international science magazine 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Public/other audiences
Results and Impact Wired Magazine (online) featured research on bacterial route finding to a general audience.
Year(s) Of Engagement Activity 2020
URL https://www.wired.com/story/these-bacteria-ate-their-way-through-a-really-tricky-maze/
 
Description Research visit to Institut de Ciència de Materials de Barcelona (CSIC) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Visit to the Institut de Ciència de Materials de Barcelona (CSIC) to discuss research results and initiate new discussions of collaborations between your institute and the Open Innovation Hub for Antimicrobial Surfaces, Surface Science Research Centre and School of Chemistry.
Year(s) Of Engagement Activity 2022
 
Description Research, Innovation and University Engagement (Gill Westgate) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/research-and-innovation-and-university-engagement/
 
Description Research, science communication and everything in between: International Women's Day (Snehal Kadam) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/international-womens-day/
 
Description Reservoir Microbiology Forum (RMF) 2020 (Jeremy Webb) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 11-12/11/20
Delegates: 70

The Energy Institute's Reservoir Microbiology Forum (RMF) is an excellent multi-disciplinary platform which brings together oil producers, scientists, technologists, engineers, academics, and researchers from around the world to present, share and discuss the widespread and versatile effects of microbes in oil reservoirs.

The Energy Institute are offering the National Biofilms Innovation Centre community 20% off the published price - please use promo code NBICRMF20 when booking to take advantage.

Speakers include:
Dr Bart Lomans, Principal Researcher, Shell Global Solutions International
Mike Wilkins, Associate Professor, Soil and Crop Sciences, Colorado State University
Dr Kenneth Wunch, Energy Technology Advisor, DuPont
Matthew Snape, Principal Consultant - Facility Integrity & Oilfield Microbiology (MiRAS), SGS
Mohita Sharma, Postdoctoral Fellow, University of Calgary, Department of Biological Sciences
Nicole Dopffel, Researcher, NORCE
Charles David Armstrong, Biocides Technology Manager, Solvay
Dr Tony Mitchell, Specialist, Production Technology, Equinor ASA
Birger Hagemann, Scientific Assistant, Clausthal University of Technology
Mohammed Sindi, PhD Student/Lab Scientist, Newcastle University/Saudi Aramco
Kathryn Thomas, Materials Engineer, DNV GL
Laura L. Machuca, Senior Research Fellow, Curtin University
Andre de Araujo Abilio, MIC Engineering Researcher - MSc Student, University of Alberta

Topics explored:
Session 1: Subsurface Microbiology and Processes, and Microbial Control
Microbial and geochemistry impact assessment for carbon capture, usage and storage (CCUS), industry challenges and options for mitigating operational risk
Tracking the evolution of microorganisms in Alberta shale operations: implications for microbiologically influenced corrosion (MIC) and natural reservoir pressure
Effects of downhole biofilm growth on reservoir productivity
Effects of the anti-adhesive compound zosteric acid against anaerobic and corrosive biofilms
The effects of increasing TDS on biocidal efficacies

Session 2 - Souring and Corrosion
Novel solutions for remediation and control of reservoir souring
High salinity and temperature effects on hydrogen sulfide production in injected seawater - produced water (ISW-PW) microcosms
Microbially influenced corrosion and internal flowcoat biodegradation in dry gas transmission pipelines: a case study
Integration of MIC management and risk based inspection activities
Aggressive internal corrosion of oil production equipment in presence of deposits and microorganisms
Gap analysis of failure investigation methods for assessing microbiologically influenced corrosion

Why attend RMF?
Gain new technical knowledge and experience
Raise your company's profile and build new partnerships
Support the industry by sharing experiences that will benefit future microbial work
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/reservoir-microbiology-forum-2020/
 
Description Reservoir Microbiology Forum, 16-17 November 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/?s=Reservoir+Microbiology+Forum%2C+16-17+November+2022
 
Description Royal Society Summer Exhibition 2019 (Kim Hardie, Morgan Alexander, Paul Williams) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact 12,000 people attended the event including policy makers, school children, companies, media. Radio broadcasts and newspaper articles as well as blogs occurred afterwards, potential collaborators for ongoing research were identified. Ongoing invitations for outreach included awarded lectures and invited articles in scientific publications. Ongoing invitations to repeat the engagement locally at events in the city and also organised through the university. Videos created are viewed online and also used in our building and further afield by the University. It was an engagement delivered by researchers and also NHS staff. Impact will include publications within education and infection control.

Paul Williams: The Royal Society Summer Science Exhibition is a week long activity designed to showcase to the public (all ages) the latest cutting edge science through exhibits of hands-on science and technology. We presented the topic of super bugs, biofilms, antibiotic resistance and super biomaterials that prevent biofilm-centred infections. In addition to the hands-on exhibits we commissioned two short films focusing on 'scales of resistance' and 'superbugs and superbiomaterials'.
Year(s) Of Engagement Activity 2019
URL https://royalsociety.org/science-events-and-lectures/2019/summer-science-exhibition/exhibits/
 
Description Royal Society Summer Science Exhibition 2020 (Morgan Alexander and Shaun Robertson) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact Participation in this online event.
Year(s) Of Engagement Activity 2020
URL https://royalsociety.org/science-events-and-lectures/2020/summer-science-online/programme/
 
Description SAIB-SAMIGE Annual Meeting 2021 (Miguel Camara, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact There were follow up discussions which may lead to future collaborations.
Year(s) Of Engagement Activity 2021
URL https://www.samige.org.ar/congreso/
 
Description SEMINAR TITLEL: Intercellular Signalling through quorum sensing: an area of unlimited opportunities 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Postgraduate students
Results and Impact A research seminar at the University of Rio Cuarto in Argentina. There was a mixture of students, academics and researchers. As a consequence of the discussion that took place during the presentation further collaborations have arisen.
Year(s) Of Engagement Activity 2019
 
Description SIGHT (Supporting Innovation and Growth in Healthcare Technologies) FortisNet webinar (2020) (Jeremy Webb) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact 19/11/2020
Delegates: 20
The invention and development of prosthetics has progressed dramatically in recent years, opening the door to a new world of possibilities - and accompanying challenges - for amputees. Research into robotics, 3D printing, AI-driven design and new, smart materials are all being pursued in order to meet the needs of the next generation of prostheses. This free online event will explore the latest challenges in prosthetics design, implementation, and post-prosthetic surgery rehabilitation, outlining the ways in which world-leading research is moving towards solutions in a number of areas. You'll hear perspectives on these challenges from patients, clinicians, academics and industry experts. We invite you to attend and explore the possible solutions with us.

Agenda
1. Housekeeping
2. Prof Gordon Blunn - introduction to SIGHT and regional engagement in healthtech sector
3. Prof Peter Smith - introduction to FortisNet
4. Alex Lewis and Nate Macabuag - patient perspective-led research
5. Chantel Ostler - challenges in post-surgery rehabilitation
6. Alasdair Gilbertson - industry update on technology landscape
7. Dr Alice Mortlock, PTTU - how to develop technologies for clinical use .
8. Prof JianJun Zhang, University of Bournemouth - Computer animation for medical visualisation and simulation
9. Matt Chapman - KTN presentation on the funding landscape.
10. Q&A

Webinar Hosts:
FortisNet - The University of Southampton's FortisNet is an interdisciplinary network of clinical, academic and industrial partners that aims to develop research, products and services that will to transform musculoskeletal health. With expertise in regenerative medicine, engineering, orthopaedics, prosthetics and orthotics, rehabilitation and assistive technologies, epidemiology and clinical trial design, FortisNet aims to improve lives by delivering better treatments, increasing the speed to market of musculoskeletal focused technology and training the next generation of scientists and engineers. FortisNet is hosted by the Institute for Life Sciences: https://www.southampton.ac.uk/life-sciences/health-and-medicine/active-bodies/fortisnet.page

SIGHT - SIGHT (Supporting Innovation and Growth in Healthcare Technologies) is an ERDF-funded business support project led by the University of Portsmouth in conjunction with the Wessex CRN and Portsmouth Hospitals University NHS Trust, designed to enhance the competitiveness of SMEs in the healthcare sector. The programme provides SMEs with the insight and specific evidence required to ensure their products meet real, identified market needs along with the necessary guidance and support to enter and expand in new healthcare markets. https://www.sightprogramme.co.uk/
Year(s) Of Engagement Activity 2020
URL https://www.eventbrite.co.uk/e/sight-fortisnet-online-event-registration-123446512843#
 
Description SIGHT (Supporting Innovation and Growth in Healthcare Technologies) Stakeholder Committee Meeting (2020) (Jeremy Webb) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact 10/12/2020
Delegates: 20
SIGHT (Supporting Innovation and Growth in Healthcare Technologies) Stakeholder Committee Meeting.

SIGHT is an ERDF-funded business support project led by the University of Portsmouth in conjunction with the Wessex CRN and Portsmouth Hospitals University NHS Trust, designed to enhance the competitiveness of SMEs in the healthcare sector.
The programme provides SMEs with the insight and specific evidence required to ensure their products meet real, identified market needs along with the necessary guidance and support to enter and expand in new healthcare markets.
Year(s) Of Engagement Activity 2020
 
Description SIGHT Stakeholder Reference Group Meeting (29/06/2021) (Jeremy Webb) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Date: 29/06/2021
Delegates: 15
SUPPORTING INNOVATION AND GROWTH IN HEALTHCARE TECHNOLOGIES (SIGHT). SIGHT is a business support programme developed by the University of Portsmouth to provide help and guidance to small and medium-sized businesses (SMEs) in the healthcare technology sector.
Year(s) Of Engagement Activity 2021
URL https://www.port.ac.uk/collaborate/business/business-services/sight
 
Description SMBE 2019 (Joe Parker, presentation) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Increased awareness of research.
Year(s) Of Engagement Activity 2019
URL https://smbe.org/smbe/SMBE2019Meeting/www.smbe2019.org/index.html
 
Description SMIHA Board meeting (Mark RIchardson) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Skin Microbiome in Healthy Ageing (SMiHA) Network. Last year I was invited to be an advisory board member by Professor Julie Thornton/ Dr Gill Westgate for a BBSRC/MRC funded grant to create the Skin Microbiome in Healthy Ageing (SMiHA) network. The grant bid was successful, and the network is now formed.
Year(s) Of Engagement Activity 2022
 
Description SOCIETY OF COSMETIC SCIENTISTS EVENT - MICROBIOME, CLAIMS & HERE TO HELP (Katerina Steventon, invited speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact I was an invited speaker on the expert panel discussing Biofilms in Personal Care.

Katerina Steventon representing the National Biofilm Innovation Centre, will discuss the presence of biofilms on the surface of the human body and their relevance to personal care. She will talk about the imbalance of skin microbiome and formation of biofilms in chronic skin conditions (like acne and dermatitis), scalp health and in intertriginous niches (axilla, feminine health), reminding the scientifically minded audience that our research and understanding in this space are truly embryonic.
Year(s) Of Engagement Activity 2021
URL https://www.scs.org.uk/news.aspx?pageid=235&newsid=251&archive=true
 
Description SPM 2018 - 4th International Conference on Scanning Probe Microscopy on Soft and Polymeric Materials (Rasmita Raval, presentation) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Presentation title: Scanning Probe Microscopy of Soft Molecular Layers on Hard Surfaces.
The goal of SPMonSPM 2018 is to gather together the top specialists from all over the world, as well as students, offering them the opportunity to present their most recent research findings and to discuss the latest ideas, discoveries and innovations in the field of scanning probe microscopies applied to molecular systems, and (bio)polymer science and engineering.
Year(s) Of Engagement Activity 2018
URL https://kuleuvencongres.be/spmonspm2018/pages
 
Description SPOTY event (J C Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Schools
Results and Impact Buffet followed by a talk on Mars bar physics and award ceremony.
Year(s) Of Engagement Activity 2018
 
Description STEM boxes for Edinburgh pupils inspire next generation of scientists 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact News article on the University of Edinburgh website announcing that curiosity boxes packed with fun STEM (science, technology, engineering, and maths) activities have been given the thumbs up by primary school pupils in Edinburgh.
Year(s) Of Engagement Activity 2020
URL https://www.ph.ed.ac.uk/news/2020/stem-boxes-for-edinburgh-pupils-inspire-next-generation-of-scienti...
 
Description STEM for Britain 2020 (Praveen kumar, invited speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact This was a national competition. Praveenkumar Kaveri was selected from 2000 initial applicants to go and present his research at the UK Parliament in London. Loughborough MP Jane Hunt was present at the session to support Praveen's research on application of single-step fluorescence test for rapid infection diagnosis. Mrs Hunt also visited the Centre for Biological Engineering to learn more about our research in this area.
Year(s) Of Engagement Activity 2020
URL https://www.lboro.ac.uk/departments/meme/news/2020/students-present-research-to-mps-in-stem-for-brit...
 
Description Safeguarding Water Quality for the Future (Katherine Fish) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/water-quality/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz-8q6iv-bqy5qFPdAL7V...
 
Description Sanitising the world: a year on, what have we learned and what challenges remain? Webinar (Tiffany Wood and Susana Direito) 17/02/2021 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact This event was for industrial and academic participants interested in the scientific challenges behind creating effective sanitisation products given the, sometimes competing, requirements of efficacy, affordability, formulation stability, safety and supply.

Formulations to sanitise surfaces have reached the forefront of our daily lives in the effort to prevent the SARS-CoV-2 virus from spreading, protecting our loved-ones and the vulnerable. Production and sales of hand sanitisers and surface disinfectants soared in response to the pandemic with many new producers entering the market.
During this event, we will explore the science behind the sanitisation of skin and their surfaces, how can these deliver efficacy whilst remaining affordable, legally compliant safe and profitable for the manufacturers. A year on from the onset of the pandemic, what lessons have been learned and what scientific challenges remain? Given that sanitisers are now a cultural norm, can science deliver innovation in their formulation?

Tiffany Wood: I was a co-organiser of this event and another NBIC Co-Investigator (Wilson Poon) was a speaker, as was one of NBIC's industry partners (Bioquell).
Susana Direito: Was an attendee.
Year(s) Of Engagement Activity 2021
URL https://www.soci.org/events/formulation-forum/2021/sanitising-the-world-a-year-on-what-have-we-learn...
 
Description School Careers Interview (Huntingdon Academy Year 3 classes) (Paul Williams) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact On line zoom call - careers discussion with two classes of year 3 children (7-8 year olds) asking me questions about where I work, who I work with and what I do.
Year(s) Of Engagement Activity 2022
 
Description School Physicist of the Year 2019 (JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Public science engagement activity to inspire school children about biofilms. Award ceremony for "best" physics high school students.
Year(s) Of Engagement Activity 2019
 
Description School Visit (Totton) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact 60 pupils attended a careers fair at which I talked about the work carried out by microbiologists and the things we do within the National Biofilms Centre.
Year(s) Of Engagement Activity 2020
 
Description School of Physical Sciences Collaborative Research Workshop 2018 (Yuri Antonio Diaz Fernandez) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Dr Y Diaz presentation to the School of Physical Sciences 'Collaborative Research Workshop outlining the collaborative and multidisciplinary activities of the research group. This initiated cross-disciplinary discussions for future projects.
Year(s) Of Engagement Activity 2018
 
Description School visit to Gartocharn Primary School 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact 90 school children learned about the importance of biofilms. We made biofilms bacteria on Petri dishes with PlayDoh and investigated bacteria from the mouth with a micrscope.
Year(s) Of Engagement Activity 2022
URL https://twitter.com/ramage_gordon?lang=en-GB
 
Description School visits as STEM ambassador (Kim Hardie) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact A range of activities related to microbiology and effective hand hygiene that are aligned with the school curriculum are delivered in different schools. It has been recognised by STEM Ambassador award certificate for 250 hours accumulated, contributed to development of an educational interactive device, been incorporated into blogs and web sites.
Year(s) Of Engagement Activity 2017,2018,2019
URL http://glo-yo.co.uk/
 
Description Science ceilidh: class visits (J C Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Workshops on the physics of music and creams, liquids, etc., taught through traditional art. Involves experiential learning.
Year(s) Of Engagement Activity 2018
 
Description Science in a summer evening (Stuart Dunbar) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Event featuring two research talks, for local school. Presented some activities during the break.
Year(s) Of Engagement Activity 2018
 
Description Science in the Park Spring 2019 (University of Nottingham) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact Public engagement activity to increase awareness of science held on 10/03/2019.
Year(s) Of Engagement Activity 2019
URL https://www.nottingham.ac.uk/research/groups/nbic/events/science-in-the-park-public-event.aspx
 
Description Science in the Park Spring 2020 (University of Nottingham) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact Public engagement activity to increase awareness of science held on 07/03/2020.
Year(s) Of Engagement Activity 2020
URL https://www.nottingham.ac.uk/research/groups/nbic/events/science-in-the-park-public-event.aspx
 
Description Science in the Park Winter 2019 (University of Nottingham) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact On 13/12/2019 we demonstrated the positive and negative implications of microbial biofilms to a large age range. Stand and activity titled: The good, the bad and the ugly of biofilms.
Year(s) Of Engagement Activity 2019,2020
 
Description Science journalism project (JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Pupils interviewing scientists to inspire them about biofilms.
Year(s) Of Engagement Activity 2020
 
Description Second International Consensus on Periprosthetic Joint Infection (Paul Stoodley) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Participant in biofilm consensus for treatment and diagnosis for orthopedic surgeons and infectious disease physicians.
Year(s) Of Engagement Activity 2018
URL https://icmphilly.com/
 
Description Secrets of your supermarket food (Callum Highmore) 
Form Of Engagement Activity A broadcast e.g. TV/radio/film/podcast (other than news/press)
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Public/other audiences
Results and Impact Appeared in this programme discussing issues surrounding chlorine washed chicken.
Year(s) Of Engagement Activity 2020
URL https://www.my5.tv/secrets-of-your-supermarket-food/season-2/secrets-of-your-supermarket-food-22da1f...
 
Description Seminar on biofilm models for Center for Biofilm Engineering at Montana State University. (Rosalind Allen) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Online seminar for the Center for Biofilm Engineering at Montana State University.
Year(s) Of Engagement Activity 2020
 
Description Seminar: Quorum sensing and Pseudomonas aeruginosa: signals, networks, biomarkers and infection 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Other audiences
Results and Impact This presentation was given by Prof Paul Williams as part of the University of Manchester Infection Seminar Series. There was an opportunity to talk to students and staff about this topic before and after the presentation.
Year(s) Of Engagement Activity 2019
 
Description Sense about Science Quality and Peer Review Workshop, 17 June 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/sense-about-science-workshop/
 
Description Sherlock Holmes and the Biofilms mystery (University of Edinburgh) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact We have created an online self guided tour for the general public, about Biofilms. We use Sherlock Holmes to be appealing to all and because the location of the tour, in one of Edinburgh lowest SIMD are, relates to Sir Arthu Conan Doyle.
Year(s) Of Engagement Activity 2021
URL https://storymaps.arcgis.com/stories/83be7dc3978d48f1932760c034f5afcf
 
Description Skin Health and Mental Wellbeing: NBIC Senior Innovation Consultant Awarded Project Funding 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/skin-health-mental-wellbeing-project/
 
Description Skin Microbiome in Healthy Ageing (SMiHA) Network 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/skin-microbiome-in-healthy-ageing-network/
 
Description Skin Microbiome in Healthy Ageing (SMiHA) network's first 'sandpit' meeting (Katerina Steventon) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact https://www.biofilms.ac.uk/skin-microbiome-in-healthy-ageing-network/
https://www.bradford.ac.uk/news/archive/2022/skin-microbiome-research-set-for-rapid-growth-in-next-decade.php
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/skin-microbiome-in-healthy-ageing-network/
 
Description SoBS Seminar Series - Topic: Bacterial signalling, communication and pathogenesis (10/03/2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Date: 10/03/2021.
Delegates: 62.
During the current pandemic, NIHR Southampton Biomedical Research Centre hold a weekly forum to discuss the latest research. Speaker: Shi-qi An
Year(s) Of Engagement Activity 2021
URL https://www.uhs.nhs.uk/ClinicalResearchinSouthampton/For-researchers/BRC-Science-Forum.aspx
 
Description Social Biofilms Meeting 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact International conference talking about recent research attended by over 500 biofilm researchers.
Year(s) Of Engagement Activity 2020
 
Description Speaker at EBNet Webinar: "Sustainable Biological Removal of N and P - Advances and Challenges for Environmental Biotech" (Yongqiang Liu) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Other audiences
Results and Impact A webinar was organized by Dr Yongqiang Liu on the platform of EBNet, BBSRC, UK. The main topic of the webinar is Sustainable Biological Removal of N and P - Advances and Challenges for Environmental Biotech, which is closely relevant to our awarded project and the engineer from PWS, i.e. our industry partner, is one of the key speakers. Around 100 researchers and engineers registered for this webinar and finally, more than 50 attended with good discussion at the end of webinar.
Year(s) Of Engagement Activity 2020
 
Description Speaker at Leamington Café Sci (Freya Harrison, invited speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact I (FH) was invited to give a talk, with Q&A session, for the Leamington Café Sci. The talk centred on microbiology, biofilms and antibiotic testing/discovery, with a complementary emphasis on reducing animal use in infection research. The event was held via Zoom and 21 people attended. The event was very well received - the Q&A session went on for almost an hour!
Year(s) Of Engagement Activity 2020
URL https://www.leamingtoncafesci.org/2020/12/04/monday-14th-december-can-we-make-a-realistic-and-ethica...
 
Description Spotlight on Industry event (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Industry/Business
Results and Impact Attended the Spotlight on Industry event on 20/01/2022.
Year(s) Of Engagement Activity 2022
URL https://events.irm.ed.ac.uk/Events/Event/7015J000000HSxwQAG
 
Description Spotlight on Industry event: Tioga Research (Susana Direito) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Industry/Business
Results and Impact Attended the Spotlight on Industry event: Tioga Research, 05/05/2022.
Year(s) Of Engagement Activity 2022
URL https://events.irm.ed.ac.uk/Events/Event/7015J000000HVfFQAW
 
Description Spring SCIX conference (Xinyi Zhu) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Hundreds of academics including researchers and PhD candidates attended. The related field including spectroscopy has been presented, where academics reported more knowledge has been learned.
Year(s) Of Engagement Activity 2022
 
Description Street Food 2018 (Dundee Science Festival) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact 75 adults attended the School of Life Sciences for an evening event as part of both Dundee Science Festival and the University's newly launched Festival of the Future. Included in the attendees were secondary school teachers from local schools who were invited specifically to allow them to learn from, and ask questions inspired by, our research and facilities.
The event combined food and drink makers, from Dundee, Angus, Fife and beyond, with our own researchers to explore the surprising, inspiring ways that research meets repast. Scientists and makers set up stalls together with activities and samples using links with food as an entry point to discuss particular areas of research. For example, Gin and the quinine in tonic was an opportunity to discuss malaria prevention and the research undertaken in Dundee on developing new therapeutics to tackle malaria. Or for example, ice cream was used as a tool to discuss emulsifiers in food and the production of such qualities by bacterial biofilms.
Professor Nicola Stanley-Wall's team were involved through the demonstration of how proteins first identified in the biofilm matrix can be repurposed for biotechnology purposes. The visitors were treated to ice cream and invited to handle 3D printed biofilms.
The audience reported that they had enjoyed the event, particularly the chance to meet scientists in such an informal, friendly setting. One teacher said "It's interesting to see science live and to make the connection with real life." Audience members also used social media such as Twitter and Instagram to share their images from the evening.
Year(s) Of Engagement Activity 2018
URL https://www.evensi.uk/foodstreet-food-university-dundee/266575057
 
Description Street Food 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Public/other audiences
Results and Impact 65 adults attended the School of Life Sciences for an evening event as part of both Dundee Science Festival and the University's Festival of the Future. Included in the attendees were secondary school teachers from local schools and members of local community groups. They were invited specifically to allow them to learn and ask questions inspired by our research and facilities which will allow us to continue to build relationships with these groups for future activity.
The event combined food and drink makers, from Dundee, Angus, Fife and beyond, with our own researchers to explore the surprising, inspiring ways that research meets repast. Scientists and makers set up stalls together with activities and samples, explaining their work and the links. Examples included the links between malaria and quinine in tonic and artemisinins in absinthe, as well as bacterial biofilms and ice cream. Lab tours were also available.
My team were involved through the development of an interactive stand with Jannetta's Gelataria (who unfortunately needed to pull out on the day due to staff illness)
The audience reported that they had enjoyed the event, particularly the chance to meet scientists in such an informal, friendly setting. Their general feedback about Street Food ranged from "How approachable all the different research information tables were." to "Loved how interactive it was." to "Speaking to the researchers about their amazing work"
The partners all enjoyed the evening as well - "Thank you so much for having us along! We found it a really valuable experience." Street Food partner
Please select comments related to your activity:
Examples from questionnaire question 'Was there anything you discovered that shocked, surprised or amazed you?':
• Learning about the biofilms and their uses was very interesting, as with the neuron research being carried out.
• I enjoyed the ice cream, and hearing all about the waterproof bacteria.
Question 'What was your favourite thing about Street Food?'
• All, but I liked so much the use of bacterial proteins in food biotechnology.
Year(s) Of Engagement Activity 2019
 
Description Superbugs vs Superheroes: Getting creative with antimicrobial resistance 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact The Medical Research Council (MRC) Insight Blog featured the NAMRIP exhibit in their article entitled 'Superbugs vs Superheroes: Getting creative with antimicrobial resistance', on 10 May 2018. The feature is based on the Superbugs Lates event at the Science Museum on 25 April 2018, where the NAMRIP exhibit was on display. The event attracted over 1000 visitors.
Year(s) Of Engagement Activity 2018
URL http://mrc.ukri.org/news/blog/superbugs-vs-superheroes-getting-creative-with-antimicrobial-resistanc...
 
Description Sustainability and Circular Economy Industry Dinner 2022 (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Attended the Sustainability and Circular Economy Industry Dinner, 16/06/22.
Year(s) Of Engagement Activity 2022
URL https://edinburgh-innovations.ed.ac.uk/news/10-year-partnership-with-epsrc-celebrated-at-showcase-an...
 
Description SynbiCITE Webinar Series: SynBio SME Experiences (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Industry/Business
Results and Impact Was an attendee. Took place on 19/05/2021.
Year(s) Of Engagement Activity 2021
URL http://www.synbicite.com/news-events/events/webinar-series-sme-experience/
 
Description TALK TITLE: Interfering with biofilm formation, signalling and virulence 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact This talk was part of the launch fo the Singapore National Biofilm Consortium. There was a mixed audience from the government, University VIPs (NUS and NTU Singapore), academics, industry and researchers. This presentation was part of the opening of a debate around different research priorities in the biofilm arena.
Year(s) Of Engagement Activity 2019
 
Description Tableau Map: Levelling Up 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact This map shows the UK small and medium sized businesses involved in NBIC funded projects
Year(s) Of Engagement Activity 2022
URL https://public.tableau.com/app/profile/nbic/viz/Levellingup_16461694924450/Dashboard1
 
Description Tableau Map: NBIC Event Participation 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Delegates from all of the countries pinpointed on this map have attended NBIC events including conferences, workshops, webinars and training.
Year(s) Of Engagement Activity 2022
URL https://public.tableau.com/app/profile/nbic/viz/NBICEventparticipation/Dashboard1
 
Description Tableau Map: NBIC Partners 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact A map showing the locations and names of all of the UK organisations engaged with NBIC.
Year(s) Of Engagement Activity 2022
URL https://public.tableau.com/app/profile/nbic/viz/NBICpartners_16461672226550/Dashboard1
 
Description Tableau Map: NBIC Projects 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact This map shows NBIC funded projects. Each dot represents a project at the associated institution with a text box providing details of the project, status and the PI from the lead institution.
Year(s) Of Engagement Activity 2022
URL https://public.tableau.com/app/profile/nbic/viz/NBICprojects/Projectsindetail
 
Description Tableau Map: SME to partners spider map 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact This map shows the UK small and medium sized businesses involved with NBIC funded projects and there associated links to research insitutions.
Year(s) Of Engagement Activity 2022
URL https://public.tableau.com/app/profile/nbic/viz/SMEtopartnersspidermap_16461698328170/Dashboard1
 
Description Talk at Universidad Politecnica de Valencia, Spain (Isabel Doutelero) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Isabel Douterelo gave a talk on the Impact of Climate Change on Drinking Water Distribution Systems.
Year(s) Of Engagement Activity 2019
 
Description Talk by Professor Leighton at the Institute of Advanced Studies "Sound Theme Launch" at Loughborough University 30 Oct 2019 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Professor Leighton invited to present talk at the Institute of Advanced Studies "Sound Theme Launch" at Loughborough University 30 Oct 2019
Year(s) Of Engagement Activity 2019
URL https://www.lboro.ac.uk/research/ias/themes/sound/
 
Description Talk with JVS products and Winchester University about a clinical trial of JVS products (Will Green) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Industry/Business
Results and Impact Conversation with JVS projects and Professor David Vogelli of the University of Winchester regarding clinical trial of JVS products novel antimicrobial in wound healing.
Year(s) Of Engagement Activity 2020
 
Description Technical visit to BEWISe, Europe's leading state of the art Wastewater Facility and Northern Area Innovation Awards 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/technical-visit-to-bewise/
 
Description Technology Support Programme 2 Round 3: i4i PDA 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/?s=Technology+Support+Programme+2
 
Description Technology Support Programme 2 Round 4: i4i PDA 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/i4i-pda/
 
Description The 5th Stevens Conference on Bacteria-Material Interactions. (Paul Stoodley, invited panel member) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Invited panel member. Infection-Resisting Implants - Is Anything Changing? Moderator: Matt Libera, Stevens Institute of Technology. Javad Parvizi, MSIS Workgroup, Paul Stoodley, OSU, Scott Philips, FDA, Imran Khan, Zimmer-Biomet. The 5th Stevens Conference on Bacteria-Material Interactions. Stevens Institute of Technology, Hoboken, NJ. June 12-13, 2019
Year(s) Of Engagement Activity 2019
URL https://www.stevens.edu/schaefer-school-engineering-science/research/bacteria-material-interactions-...
 
Description The Academy of Medical Sciences South-East Region Annual Scientific Lecture and Dinner 2019 (Tim Leighton, Lecture) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact Lecture and dinner on 14/10/2019 for networking and knowledge exchange to promote wider regional engagement and awareness of the academics work. Tim Leighton presented on the topic of Combatting AMR and infection using just sound, water and air.
Year(s) Of Engagement Activity 2019
URL https://acmedsci.ac.uk/more/events/south-east-region-annual-scientific-lecture-and-dinner-2019
 
Description The Bare Minimum: Skinmalism and the Microbiome (Katerina Steventon) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Co-author of a peer reviewed article in the international publication Cosmetics and Toiletries.Written with MYMICROBIOME.
Year(s) Of Engagement Activity 2022
URL https://cosmeticsandtoiletries.texterity.com/cosmeticsandtoiletries/march_2022/MobilePagedArticle.ac...
 
Description The Big Little Trend: Where to Start with a Microbiome-focused Skincare Brand (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/microbiome-skincare/
 
Description The Edinburgh Complex Fluids Partnership (ECFP): The Physics Of Cleaning And Disinfection (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Workshop participation. Increased awareness of research.
Year(s) Of Engagement Activity 2019
URL https://www.rehis.com/event/edinburgh-complex-fluids-partnership-ecfp-physics-cleaning-and-disinfect...
 
Description The Fourth State of Matter (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC funded project.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/the-fourth-state-of-matter/
 
Description The Future of Clean Skincare with Cosmetics Business (Katerina Steventon, Invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact I gave a virtual talk on the biofilm modality relevant to personal care, skin microbiome, new technologies and introduced NBIC.
Year(s) Of Engagement Activity 2020
URL https://cosmeticsbusiness.com/news/article_page/The_Future_of_Clean_Skincare_with_Cosmetics_Business...
 
Description The National Biofilms Innovation Centre (NBIC) Launch Event (Perfectus Biomed) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact News article by Perfectus Biomed advertising the NBIC launch event in November 2017.
Year(s) Of Engagement Activity 2017
URL https://perfectusbiomed.com/national-biofilms-innovation-centre-nbic-launch-event/
 
Description The Physics of Viruses workshop (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Attended the 'The Physics of Viruses workshop', 24/06/22.
Year(s) Of Engagement Activity 2022
URL https://www.physicsoflife.org.uk/physics-of-viruses.html
 
Description The Social Biofilm Network Conference 2020 (Nicola Stanley-Wall, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact The invitation was made as researchers internationally wanted to learn about the latest developments from the laboratory.
Year(s) Of Engagement Activity 2020
URL https://twitter.com/social_biofilms
 
Description The Stavros Niarchos Foundation Complex Joint Reconstruction Center Biofilm Symposium (Paul Stoodley, invited panel member) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Invited panel member. The Stavros Niarchos Foundation Complex Joint Reconstruction Center Biofilm Symposium. New York, NY. Thursday, August 1, 2019. Presentation to the Hospital for Special Surgery orthopedic surgeons and infectious disease physicians.
Year(s) Of Engagement Activity 2019
 
Description The Water Biofilms Seminar Series with EBNet: 6 July 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/event/the-water-biofilms-seminar-series-with-ebnet/
 
Description The Water Biofilms seminar series: "Granular Activated Carbon Biofilms for Biomethanation from Wastewater" by Dr Po-Heng Lee, Imperial College London 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on the EbNet website advertising a webinar which will be run jointly with NBIC.
Year(s) Of Engagement Activity 2022
URL https://ebnet.ac.uk/the-water-biofilms-seminar-series-granular-activated-carbon-biofilms-for-biometh...
 
Description The World News Article: How chlorinated chicken STILL has bacteria on it (Callum Highmore) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Public/other audiences
Results and Impact Article reporting on a TV show in which Callum featured.
Year(s) Of Engagement Activity 2020
URL https://twnews.co.uk/uk-news/how-chlorinated-chicken-still-has-bacteria-on-it
 
Description The biologist magazine of the Royal Society of Biology. Article and front cover (Susana Direito) 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Public/other audiences
Results and Impact On the back of the promotion for the NBIC #BiofilmAware campaign we were approached by the Royal Society of Biology with an opportunity for one of our scientists to write an article on biofilms for their digital and print magazine, 'The Biologist'.
NBIC IRF Susana Direito's article on biofilm awareness in a time of Covid-19 titled 'Breaking down barriers' is featured in the summer issue of the magazine, and has made the front cover. There is also web article version article on their website.
Year(s) Of Engagement Activity 2021
URL https://thebiologist.rsb.org.uk/biologist-features/breaking-down-barriers
 
Description The future of biofilms 
Form Of Engagement Activity A magazine, newsletter or online publication
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact News article on the Chilled Food Association website on the topic of biofilm prevention specifically referencing the related NBIC workshop.
Year(s) Of Engagement Activity 2022
URL https://www.chilledfood.org/the-future-of-biofilms/?utm_source=emailmarketing&utm_medium=email&utm_c...
 
Description The impact of a pandemic on the skin microbiome (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/the-impact-of-a-pandemic-on-the-skin-microbiome-sector/
 
Description This Week in Microbiology Podcast (Callum Highmore) 
Form Of Engagement Activity A broadcast e.g. TV/radio/film/podcast (other than news/press)
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact NBIC research Callum's research on chlorine wash and food safety was picked up the the ASM community and his work was included in one of the podcast. The session concerning his work lasts about 10 minutes. The associated paper was VBNC Listeria and Salmonella induced by chlorine stress remain infectious.
Year(s) Of Engagement Activity 2018
URL https://www.microbe.tv/twim/twim-179-transcript/
 
Description Transforming 16S Sequencing (NBIC case study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Highlight the success of an NBIC funded project.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/transforming-16s-sequencing/
 
Description Treating Polymicrobial Biofilms (NBIC Case Study) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact NBIC case study.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/polymicrobial-biofilms/
 
Description UK BioIndustry Association (BIA) 16th Annual bioProcessUK Conference 2019 (Veeren Chauhan, speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact The Annual bioProcess UK Conference is took place on 27-28 November 2019.

This year's event will be the sixteenth in a series of increasingly successful conferences first held in Newcastle in 2004 and then in numerous other UK cities including: Liverpool, Edinburgh, Cardiff, Brighton, York, Manchester, Glasgow, Bristol, London and Cambridge.

The conference aims to be the lead showcase event for biopharmaceutical innovation and will be made up of keynote presentations, focused workshops, the Peter Dunnill award and lecture, exhibition, 1-1 speed-partnering and the popular networking conference dinner.
Year(s) Of Engagement Activity 2019
URL https://www.bioindustry.org/event-listing/bioprocessuk-conference-2019.html
 
Description UK Continence Society Annual Meeting 2021 (Sandra Wilks, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Invited speakers at the UK Continence Society Annual Meeting.
Year(s) Of Engagement Activity 2021
URL http://ukcs.uk.net/Thursday2021-programme
 
Description UK-India-Singapore Biofilm Webinar Series: Biofilms and Engineered Systems 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/event/uk-india-singapore-biofilm-webinar-series-biofilms-and-engineered-s...
 
Description UK-International Coronavirus Network Launch Event (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact Attended the UK-International Coronavirus Network Launch Event on 06/11/2021.
Year(s) Of Engagement Activity 2021
 
Description UK-Singapore Engagement 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Meeting with SCELSE on 18/02/2019 to discuss collaborative partnership opportunities.
Year(s) Of Engagement Activity 2019
 
Description UK-Singapore Engagement 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact In January 2017, the UK Dept. for Business, Energy and Industrial Strategy (BEIS) led a delegation to Singapore to inaugurate the UK-Singapore Science Dialogue, building upon the UK-Singapore Innovation and Research Partnership signed by David Cameron, then UK PM, and Lee Hsien Loong, PM of the Republic of Singapore. Following on from this delegation a number of strategic dialogues have taken place. In Feb 2017 the UK High Commission in Singapore facilitated a 2-day meeting between the Singapore Centre for Environmental Life Sciences Engineering (SCELSE), and the UK's recently awarded National Biofilms Innovation Centre (NBIC) (meeting attendees included NRF, British High Commission representation and SCLESE Governing Board Chair Mr Peter Ho). These discussions have identified a number of clear strengths and synergies that will allow us to amplify our efforts to address the core scientific challenges caused by biofilms, on a cutting edge platform of basic and translational research.
Year(s) Of Engagement Activity 2018
 
Description UK-Singapore S&I Strategic Dialogue 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact International Collaboration Dialogue on 12/02/2019 to establish collaboration between Singapore and UK research and industry. Main participants invited by the UKDC.
Year(s) Of Engagement Activity 2019
 
Description UKRI Infrastructure Roadmap Programme 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Contribution to the roadmapping exercise which lead to the UKRI policy report titled The UK's research and innovation infrastructure: opportunities to grow our capability.
Year(s) Of Engagement Activity 2019
URL https://www.ukri.org/wp-content/uploads/2020/10/UKRI-201020-UKinfrastructure-opportunities-to-grow-o...
 
Description UKRI Strategy Launch - Southampton - Stakeholder (Transforming tomorrow together) (Jeremy Webb) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Delegates: 100
Date: 20/05/2022
Professor Dame Ottoline Leyser, Chief Executive of UKRI, would like to invite you to join us to hear about UKRI's first five-year strategy and how it will catalyse an outstanding research and innovation system in the UK that gives everyone the opportunity to contribute and to benefit, enriching lives locally, nationally and globally.
Research and innovation are central to tackling the biggest challenges we face: post-pandemic recovery, achieving Net Zero and building a vibrant knowledge economy that benefits the whole of the UK. The multi-year financial commitment to R&D at the Spending Review sends a strong signal of confidence in its importance and provides an opportunity for us to work together to turn these challenges into opportunities and shape a dynamic, diverse and inclusive system for the future.
UKRI is the UK's largest public funder of research and innovation, investing more than £8 billion each year. We bring together expertise across all disciplines and sectors to advance our understanding of society and the world around us, and to capture and deliver value from knowledge and ideas.
This event builds on discussions with stakeholders that have taken place throughout the development of our Strategy and marks the start of a programme of activity that will see UKRI engaging with communities across the UK to explore how we can work together to deliver on the transformative opportunities for our society from research and innovation.
Year(s) Of Engagement Activity 2022
URL https://www.eventbrite.co.uk/e/ukri-strategy-launch-southampton-stakeholder-tickets-314464330277
 
Description University of Liverpool Chemistry Industry Engagement Day 2018 (Rasmita Raval, Presentation) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Industry engagement day on 13/09/18 to showcase research and innovation within the department of chemistry, University of Liverpool. This led to a number of follow-up interactions with industry,
Year(s) Of Engagement Activity 2018
URL https://news.liverpool.ac.uk/2018/09/13/industry-event-showcasing-chemistry-research-and-facilities/
 
Description University of Liverpool Infectious Diseases Theme Advisory Group 2018 (Yuri Antonio Diaz Fernandez) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Strategy Meeting.
Year(s) Of Engagement Activity 2018
 
Description University of Nottingham 2017 (Wonder) (Kim Hardie) 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact We invited families to explore the huge range of research and teaching activities that celebrated the Year of the Periodic Table. Activities had a fun link to the elements and ranged from art workshops through to science experiments.
Year(s) Of Engagement Activity 2017
URL https://www.nottingham.ac.uk/wonder/
 
Description University of Nottingham 2019 (Wonder) (Kim Hardie and Morgan Alexander) 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact 5000 people attend this public engagement, previously called May Fest. Media attends and reports on it, and our activities have been captured in this. Feedback has been sought from participants who report behavioural change in hand hygiene. as part of this an educational intervention was licensed and research on its effectiveness conducted in schools and the NHS. The research has been published in relevant scientific journals.
Year(s) Of Engagement Activity 2019
 
Description University of Pittsburgh Gap Fund selection review meeting (Mark Richardson) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Workshop (15/07/21) on best practice in project assessment for POC funding. Links with US Universities (Pittsburgh) and their partner companies on Innovation/ Translation Practice. This involved Pittsburgh Uni, Abbvie, Orange Grove Bio, Queen Mary's university London, Bayer Corporation and MIT.
Year(s) Of Engagement Activity 2021
 
Description University of Southampton Bioengineering Seminar Series (Mark Richardson, presentation) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact On 25/10/2019 Mark Richardson presented on the topic of Antimicrobial Technologies - Delivering the Economic Potential in the Prevention Detection Management and Engineering of Biofilms. The purpose was to raise awareness of NBIC opportunities to young researchers locally
Year(s) Of Engagement Activity 2019
 
Description University of Southampton Microbiology Seminar (01/06/21) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Date: 01/06/21
Delegates: 30
University of Southampton Microbiology Seminar. Speakers Dan Noel and Declan Power.
Year(s) Of Engagement Activity 2021
 
Description University of Southampton Microbiology Seminar (06/07/2021) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact University of Southampton Microbiology Seminar.
Year(s) Of Engagement Activity 2021
 
Description University of Southampton Microbiology Seminar (08/06/21) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Date: 08/06/21
Delegates: 30
University of Southampton Microbiology Seminar. Speakers Ying Hu and Zhi-Xiu Yan.
Year(s) Of Engagement Activity 2021
 
Description University of Southampton Microbiology Seminar (11/05/21) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Date: 11/05/21
Delegates: 30
University of Southampton Microbiology Seminar. Speaker: Ellie Wareham.
Year(s) Of Engagement Activity 2021
 
Description University of Southampton Microbiology Seminar (18/05/21) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Date: 18/05/21
Delegates: 30
Year(s) Of Engagement Activity 2021
 
Description University of Southampton Microbiology Seminar (22/06/21) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Date: 22/06/21
Delegates: 30
University of Southampton Microbiology Seminar.
Year(s) Of Engagement Activity 2021
 
Description University of Southampton UCAS Open Day 2019 (Jeremy Webb, presentation) 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Schools
Results and Impact Presentation at the University of Southampton open day on 12/10/2019 to prospective students and their parents. Presentation title: New treatments for antibiotic resistant infections. Impact: Promote University of Southampton and increase awareness of Antibiotic Resistant and new treatment as well as NBIC.
Year(s) Of Engagement Activity 2019
 
Description University of Southampton and University Hospital Southampton Foundation Trust COVID-19 Assessment Panel (Peter Smith) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Research and clinical assessment panel to fund and focus activities on the Covid-19 pandemic and possible interventions, or discouraging activity that would defocus the response.
Year(s) Of Engagement Activity 2020,2021
 
Description University of Southampton, School of Biological Sciences (SoBS) Ecology Research Presentations 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Date: 20/05/21
Delegates: 30
Presentations from Jan Janouskovec, Robert Holland, Jesus Aguirre Gutierrez and Peter Graystock.
Year(s) Of Engagement Activity 2021
 
Description Unlocking the different skincare approaches from microbiome (Katerina Steventon) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Article
Year(s) Of Engagement Activity 2019
URL https://thesecretlifeofskin.com/2019/05/08/unlocking-the-different-skincare-approaches-from-the-micr...
 
Description Unruly Objects Exhibition (Suzie Hingley-Wilson) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Public/other audiences
Results and Impact Unruly Objects explores ways of capturing carbon using cyanobacteria encapsulated into a kind of 'living latex' to mitigate climate change. It also investigates the possibility of conserving antiquities through the enhancement of their microbiomes, the place of BioArt within museums, and the use of blockchain technologies to store conservation data. Project developed by Anna Dumitriu in collaboration with Simone Krings, Dr. Suzie Hingley-Wilson and Professor Joseph Keddie from the University of Surrey.
Join the Unruly Objects Lab to create your own tiny marble 'unruly objects' painted with 'living latex' and keep your tiny sculpture or leave it with us to become part of a new BioArt work.
Activity open to adults and children (5+ years) accompanied with an adult.
Year(s) Of Engagement Activity 2022
URL https://www.vam.ac.uk/event/4KODrMy2bB/unruly-objects
 
Description Using AI to Detect Bacteria in Wastewater (Gavin Melaugh) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/using-ai-to-detect-bacteria/?utm_medium=email&_hsmi=2&_hsenc=p2ANqtz-_J-i...
 
Description Using the sound of bubbles against two apocalypses 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Prof Tim Leighton presented the Inaugural Lecture for the Southampton Branch of Biomedical Engineering Division of the Institution of Mechanical Engineers (IMechE). Presentation at the University of Southampton on 24 April 2018.
Year(s) Of Engagement Activity 2018
URL http://www.southampton.ac.uk/namrip/publicengagment/tim-imeche-talk.page
 
Description V&A BioArt Exhibition: Unruly Objects, 24-25 September 2022 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/bioart-exhibition/
 
Description Value proposition workshop by Boutique Innovation (Susana Direito) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact Attended the Value proposition workshop (07/04/22) by Boutique Innovation.
Year(s) Of Engagement Activity 2022
 
Description Videos highlighting Biofilms Research at the University of Edinburgh 
Form Of Engagement Activity A broadcast e.g. TV/radio/film/podcast (other than news/press)
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Other audiences
Results and Impact Launched as part of the BiofilmWeek 2021, a video was produced with some NBIC researchers (Co-Investigators, IRFs, and Co-Director) based at the School of Physics and Astronomy, discussing their past and future research on biofilms.
Requests have been made to produce a video with different Schools/Institutes based at Edinburgh University in future as well.
Year(s) Of Engagement Activity 2021
URL https://www.ed.ac.uk/edinburgh-biofilms-innovation/biofilms-research/biofilms-research-video
 
Description Virtual AMR Innovation Mission UK 2021 (Kim Hardie) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Attendee and networking meeting contributor.
Year(s) Of Engagement Activity 2021
URL https://virtual-amr-innovation-mission-uk.b2match.io/participants
 
Description Virtual Public Engagement and Outreach (JC Denis) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL http://biofilms.ac.uk/virtual-public-engagement-and-outreach/
 
Description Visit to Professor Leighton's lab by Lady Cobham 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Supporters
Results and Impact On 19th July 2017, Lady Cobham visited Professor Leighton and had a tour of his lab including a demonstration of his StarStream invention.
Year(s) Of Engagement Activity 2017
 
Description Visit toi NAMRIP by Alana Dowling, fellow from the Parliamentary Office of Science and Technology (POST) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Policymakers/politicians
Results and Impact On 7th November 2018, Alana Dowling, a fellow from the Parliamentary Office of Science and Technology (POST), visited NAMRIP for a day of interviews and demos. The visit was to gather information for input into a POSTnote briefing for Parliament on AMR factors in human and animal pathogens and the environment. Alana heard about NAMRIP via our website. POSTnotes are four page summaries of public policy issues based on reviews of the research literature and interviews with stakeholders from across academia, industry, government and the third sector.
Year(s) Of Engagement Activity 2018
URL https://www.southampton.ac.uk/namrip/news/2018/11/alana-dowling-visit.page?
 
Description Watch: Baby Skin and the Microbiome Webinar 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/baby-skin-and-the-microbiome-webinar
 
Description Watch: Microbial Impacts - Wessex and South Coast Regional Meeting 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/microbial-impacts/
 
Description Watch: NBIC Biofilm Prevention Workshop 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/biofilm-prevention-workshop/
 
Description Watch: NBIC Open Innovation Webinar 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/nbic-open-innovation-webinar/
 
Description Watch: NBIC PhD/Postdoc Talk - Utilising Metagenomics in Early to Late-Stage R&D 
Form Of Engagement Activity A press release, press conference or response to a media enquiry/interview
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/utilising-metagenomics?utm_medium=email&_hsmi=204922491&_hsenc=p2ANqtz-8c...
 
Description Watch: The Water Cycle, Reservoir and Stormwater Management Webinar 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2021
URL https://www.biofilms.ac.uk/water-cycle-reservoir-and-stormwater-management/
 
Description Watch: UK-India-Singapore Biofilm Series, Health/Clinical Webinar 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact News article on NBIC website.
Year(s) Of Engagement Activity 2022
URL https://www.biofilms.ac.uk/uk-india-singapore-health-clinical/?utm_medium=email&_hsmi=201049120&_hse...
 
Description Welcome to microbe city (JC Denis) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Public/other audiences
Results and Impact On 14/10/2019 we held a workshop about biofilms in IKEA to inspire and raise public awareness of biofilms.
Year(s) Of Engagement Activity 2019
 
Description Wessex AHSN at NHS Expo 2019 (Sandra Wilks, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Invited speaker for Wessex AHSN.
Year(s) Of Engagement Activity 2019
URL https://wessexahsn.org.uk/news/1905/register-now-for-the-wessex-ahsn-primary-care-expo
 
Description Wessex Health Partners Working Group, Lead discovery (Peter Smith) 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact Coordination of Wessex biomedical discovery, translation and innovation across all Universities and NHS Hospital Trusts.
Year(s) Of Engagement Activity 2020,2021
 
Description Wessex Immunology Forum Spring 2018 Meeting (Jeremy Webb, invited speaker) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact Increasing the reputation of the University of Southampton and the National Biofilms Innovation Centre.
Year(s) Of Engagement Activity 2018
URL https://generic.wordpress.soton.ac.uk/reech/2018/07/11/phd-students-enjoy-attending-a-local-conferen...
 
Description What is the microbiome and how does this impact on biofilms? (Mark Richardson) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/what-is-the-microbiome-and-how-does-this-impact-on-biofilms/
 
Description Work Experience Week 2018 (Nicola Stanley-Wall) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact The public engagement aims of the School of Life Sciences are to:
1. Build on our creative partnerships to deliver a high quality, innovative engagement programme.
2. Engage a range of people with our research.
3. Collaborate with our local communities to meet their needs and widen our reach.
4. Promote and support a culture of active participation in public engagement within our life sciences community. This includes students, research and non-research staff.
We have identified with local schools that access to laboratory experience and scientific workshops is a gap in the current provision by schools that could help to encouraging pupils to consider science as a future career. The Work Experience week is a programme with the objective of engaging pupils in scientific research and transferable skills. Priority is given for students from schools in areas of low income. It ran from July 30-August 3, 2018 for 24 S6 pupils from a variety of local secondary schools. As part of this week they took part in a variety of activities facilitated by the School of Life Sciences including a careers speeding dating session, tours of various scientific facilities, visits to the James Hutton Institute and the School of Medicine, ethics discussions, group presentations and four separate sessions of lab-based practical work.
Along with my lab, I hosted a small group of pupils for a 3-hour lab session, giving them hands-on experience in a working lab and answering questions about careers and study
Evaluation was undertaken to assess the quality of the Work Experience Week for pupils. Feedback was overwhelmingly positive, including one student who said: The work experience week at the SLS gave me a real insight into the different aspects of studying a course at Life Sciences from drug discovery to plant sciences. The week has really made me consider choosing Dundee University as a place to study as all the staff and students were so welcoming and the different range of facilities was amazing. The experience has also made me less nervous and more excited about applying to a science degree at university if my first choice doesn't work out. I gained a lot of useful information that will benefit me in real life and in applying to university in the near future.
Year(s) Of Engagement Activity 2018
 
Description Work Experience Week 2022 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact The Work Experience Week ran from July 25-29, 2022 for twelve S5/6 pupils from Dundee schools. The week had a hybrid approach, with two days taking place within the School of Life Sciences buildings/labs, and three days taking place online. Pupils engaged with careers stories from students and researchers, scientific experiments and data analysis activities, and workshops on animals in research and science in the media.

My lab supervised pupils during hands-on sessions in the laboratory.

Feedback was positive from the students involved; one stated "It was great to be able to go into the labs and get some experience doing experiments, we didn't get a lot of chances to do that last year because of COVID."
Year(s) Of Engagement Activity 2022
 
Description World Antibiotic Awareness Week 2019 (University of Bradford) 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Schools
Results and Impact Fairs on antibiotic resistance and biofilms as part of the University of Bradford initiative to raise awareness of antibiotic resistance and the impact it may have on society in a series of events for World Antibiotic Awareness Week.
Year(s) Of Engagement Activity 2019
URL https://www.bradford.ac.uk/news/archive/2019/university-highlights-antibiotic-resistance-threat.php
 
Description Wound Healing and Cleaning with just water, air and Sound 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Policymakers/politicians
Results and Impact Presentation by Prof Tim Leighton at Global-NAMRIP Conference in Kampala, Uganda, 4-7 March 2019. 140 participants including Minister of Health
Year(s) Of Engagement Activity 2019
URL http://www.southampton.ac.uk/namrip/news/2019/02/uganda-conference.page?
 
Description YMS2020: Inspiring the next generation of scientistsonline (Shi-qi An) 
Form Of Engagement Activity Engagement focused website, blog or social media channel
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Blog.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/yms2020-inspiring-the-next-generation-of-scientists-online/
 
Description YORKSHIRE BIO-PARTNERING EVENT, BIONOW (Katerina Steventon, invited speaker) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Industry/Business
Results and Impact University of Bradford, Faculty of Life Sciences Yorkshire Bio-Partnering event bringing together academia and industry on 13th April at its city campus, with a focus on Healthcare Innovation and Bioscience.
Year(s) Of Engagement Activity 2022
URL https://www.bradford.ac.uk/ict/yorkshire-biopartnering/7th-proof---Yorkshire-BioPartnering-Event-Spo...
 
Description Young Microbiologists Symposium 2020 (Shi-Qi An, Jo Slater-Jefferies, Paul Stoodley) 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact 6th Young Microbiologists Symposium on Microbe Signalling, Organisation and Pathogenesis, 26th - 27th August 2020.
Shi-Qi An: Organising committee.
Presentation by Paul Stoodley titled 'Microbe Signalling, Organisation and Pathogenesis': Jackson, A. et al. Development of elastomeric 'artificial' biofilms as model systems for studying the relationship between marine biofilm physico-mechanical properties and drag penalty.
Year(s) Of Engagement Activity 2020
URL https://www.biofilms.ac.uk/young-microbiologists-symposium-26-27th-august-2020-southampton-uk/#