UK Fusion Programme
Lead Research Organisation:
EURATOM/CCFE
Department Name: Culham Centre for Fusion Energy
Abstract
Fusion is the energy-releasing process that powers the sun and other stars. If it can be harnessed economically on earth it would be an essentially limitless source of safe, environmentally responsible energy. Fusion energy is therefore strongly mission-orientated. The most promising method uses strong magnetic fields in a tokamak configuration to allow a high temperature deuterium-tritium plasma to be generated while minimising contact with the surrounding material surfaces.The UK contributes to fusion research in two ways: (i) through the UK's own programme focused on the spherical tokamak experiment MAST, and (ii) by contributing to the Joint European Torus (JET) programme. The MAST and JET facilities are situated at Culham Science Centre. International co-operation is strong with the focus on the International Tokamak Experimental Reactor (ITER), which will be the first fusion device to achieve energy gain and sustained burn.Experimental programmes on the MAST and JET tokamaks are performed to help resolve and refine understanding of key physics issues for ITER. In addition, experimental programmes on MAST focus on testing the potential of the spherical tokamak as a more compact option for future fusion devices. A strong theory and modelling group supports the experimental programmes and contributes to the research and development of fusion materials and to studies of conceptual fusion power stations. Expansion of the research and development of ITER specialist (i.e. diagnostic and heating) systems, focuses on securing major roles for the UK in the provision of two or three of these large complex projects.The results of the research are presented in reports and publications, and at conferences, expert groups and specialist committees. Collaborations with researchers in other areas of science and technologies are pursued strongly, where the research overlaps with fusion R&D.
People |
ORCID iD |
| Christopher Llewellyn-Smith (Principal Investigator) |
Publications
Ovsyannikov D
(2006)
Mathematical methods of plasma vertical stabilization in modern tokamaks
in Nuclear Fusion
Borba D
(2006)
Confinement transitions (H-mode) in JET inner wall limiter plasmas
in Plasma Physics and Controlled Fusion
Cruz N
(2006)
JET real-time project test-bench software structure
in Fusion Engineering and Design
Mahajan S
(2006)
Exact two-body bound states with Coulomb repulsion in a periodic potential
in Journal of Physics A: Mathematical and General
Counsell G
(2006)
On the use of a capacitive diaphragm gauge for dust detection in next-step fusion devices
in Review of Scientific Instruments
Scannell R
(2006)
Enhanced edge Thomson scattering on MAST
in Review of Scientific Instruments
Eriksson L
(2006)
On ion cyclotron current drive for sawtooth control
in Nuclear Fusion
Shibaev S
(2006)
MAST data acquisition system
in Fusion Engineering and Design
Fülöp T
(2006)
Destabilization of magnetosonic-whistler waves by a relativistic runaway beam
in Physics of Plasmas
Gryaznevich M
(2006)
Perturbative and non-perturbative modes in START and MAST
in Nuclear Fusion
Garcia O
(2006)
Radial interchange motions of plasma filaments
in Physics of Plasmas
Andrew Y
(2006)
Improved charge exchange spectroscopy on the Joint European Torus for ion temperature and rotation velocity profiles
in Review of Scientific Instruments
Counsell G
(2006)
Tritium retention in next step devices and the requirements for mitigation and removal techniques
in Plasma Physics and Controlled Fusion
Batista A
(2006)
An FPGA-based multi-rate interpolator with real-time rate change for a JET test-bench system
in IEEE Transactions on Nuclear Science
McArdle G
(2006)
Results from evaluation of a long pulse pilot data acquisition system on MAST
in Fusion Engineering and Design
AOKI M
(2007)
Atom-based bond-order potentials for modelling mechanical properties of metals
in Progress in Materials Science
Pitts R
(2007)
ELM transport in the JET scrape-off layer
in Nuclear Fusion
CAWKWELL M
(2007)
Atomistic study of athermal cross-slip and its impact on the mechanical properties of iridium
in Acta Materialia
Frigione D
(2007)
Pellet injection and high density ITB formation in JET advanced tokamak plasmas
in Nuclear Fusion
Saarelma S
(2007)
MHD stability analysis of ELMs in MAST
in Plasma Physics and Controlled Fusion
Valovic M
(2007)
On the correlation between density profile and particle flux in H-mode tokamak plasmas and the implication for ITER
in Nuclear Fusion
Newton S
(2007)
Collisional bulk ion transport and poloidal rotation driven by neutral beam injection
in Physics of Plasmas
Maier H
(2007)
Tungsten and beryllium armour development for the JET ITER-like wall project
in Nuclear Fusion
Lungu C
(2007)
Beryllium coatings on metals for marker tiles at JET: development of process and characterization of layers
in Physica Scripta
DERLET P
(2007)
Million-atom molecular dynamics simulations of magnetic iron
in Progress in Materials Science
Kirk A
(2007)
Evolution of the pedestal on MAST and the implications for ELM power loadings
in Plasma Physics and Controlled Fusion
McKay R
(2007)
Fast Alfven Wave Heating and Acceleration of Ions in a Nonuniform Magnetoplasma
in The Astrophysical Journal
Lavrentiev M
(2007)
Monte Carlo study of thermodynamic properties and clustering in the bcc Fe-Cr system
in Physical Review B
Neu R
(2007)
Investigation of tungsten coatings on graphite and CFC
in Physica Scripta
Dnestrovskij Y
(2007)
Analysis of pressure profiles and transport simulations of MAST discharges
in Plasma Physics and Controlled Fusion
Mrovec M
(2007)
Bond-order potential for simulations of extended defects in tungsten
in Physical Review B
Lönnroth J
(2007)
Effects of ripple-induced ion thermal transport on H-mode plasma performance
in Plasma Physics and Controlled Fusion
NGUYENMANH D
(2007)
Environmental dependence of bonding: A challenge for modelling of intermetallics and fusion materials
in Progress in Materials Science
Hirai T
(2007)
Characterization and heat flux testing of beryllium coatings on Inconel for JET ITER-like wall project
in Physica Scripta
Duffy D
(2007)
Including the effects of electronic stopping and electron-ion interactions in radiation damage simulations
in Journal of Physics: Condensed Matter
Cohen R
(2007)
Current and potential distribution in a divertor with toroidally-asymmetric biasing of the divertor plate
in Plasma Physics and Controlled Fusion
McDonald D
(2007)
Recent progress on the development and analysis of the ITPA global H-mode confinement database
in Nuclear Fusion
Loarte A
(2007)
Transient heat loads in current fusion experiments, extrapolation to ITER and consequences for its operation
in Physica Scripta
Merrifield J
(2007)
Intermittency, dissipation, and scaling in two-dimensional magnetohydrodynamic turbulence
in Physics of Plasmas
Dudarev S
(2007)
Driven mobility of self-interstitial defects under electron irradiation
in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
Matthews G
(2007)
Overview of the ITER-like wall project
in Physica Scripta
Forrest R
(2007)
Statistical analysis of cross sections-A new tool for data validation
in Fusion Engineering and Design
Strachan J
(2008)
Modelling of carbon migration during JET 13 C injection experiments
in Nuclear Fusion
Meyer H
(2008)
Active control of the H-mode transition on MAST
in Plasma Physics and Controlled Fusion
De Vries P
(2008)
Effect of toroidal field ripple on plasma rotation in JET
in Nuclear Fusion
Llewellyn Smith C
(2009)
The path to fusion power
in The European Physical Journal Special Topics
Maddison G
(2009)
Dimensionless pedestal identity plasmas on Alcator C-Mod and JET
in Nuclear Fusion
Meyer H
(2009)
Overview of physics results from MAST
in Nuclear Fusion
Cottrell G
(2013)
A survey of plasma facing materials for fusion power plants
in Materials Science and Technology