UK Fusion Programme
Lead Research Organisation:
CCFE/UKAEA
Abstract
Fusion is the energy-releasing process that powers the sun and other stars. If it can be harnessed economically on earth it would be an essentially limitless source of safe, environmentally responsible energy. Fusion energy is therefore strongly mission-orientated. The most promising method uses strong magnetic fields in a tokamak configuration to allow a high temperature deuterium-tritium plasma to be generated while minimising contact with the surrounding material surfaces.The UK contributes to fusion research in two ways: (i) through the UK's own programme focused on the spherical tokamak experiment MAST, and (ii) by contributing to the Joint European Torus (JET) programme. The MAST and JET facilities are situated at Culham Science Centre. International co-operation is strong with the focus on the International Tokamak Experimental Reactor (ITER), which will be the first fusion device to achieve energy gain and sustained burn.Experimental programmes on the MAST and JET tokamaks are performed to help resolve and refine understanding of key physics issues for ITER. In addition, experimental programmes on MAST focus on testing the potential of the spherical tokamak as a more compact option for future fusion devices. A strong theory and modelling group supports the experimental programmes and contributes to the research and development of fusion materials and to studies of conceptual fusion power stations. Expansion of the research and development of ITER specialist (i.e. diagnostic and heating) systems, focuses on securing major roles for the UK in the provision of two or three of these large complex projects.The results of the research are presented in reports and publications, and at conferences, expert groups and specialist committees. Collaborations with researchers in other areas of science and technologies are pursued strongly, where the research overlaps with fusion R&D.
Organisations
People |
ORCID iD |
Christopher Llewellyn-Smith (Principal Investigator) |
Publications

Rozhansky V
(2006)
Modelling of radial electric field profile for different divertor configurations
in Plasma Physics and Controlled Fusion

McDonald D
(2006)
The dimensionless scaling of ELMy H-mode confinement
in Comptes Rendus Physique

Salmi A
(2006)
JET experiments to assess the clamping of the fast ion energy distribution during ICRF heating due to finite Larmor radius effects
in Plasma Physics and Controlled Fusion

Christiansen J
(2006)
Self-consistent plasma modelling by Monte Carlo test particles
in Plasma Physics and Controlled Fusion

Kaye S
(2006)
The role of aspect ratio and beta in H-mode confinement scalings
in Plasma Physics and Controlled Fusion

Darrow D
(2006)
Initial results from the lost alpha diagnostics on Joint European Torus
in Review of Scientific Instruments

Gimblett C
(2006)
The role of edge current-driven modes in ELM activity
in Plasma Physics and Controlled Fusion

Negus C
(2006)
Enhanced core charge exchange recombination spectroscopy system on Joint European Torus
in Review of Scientific Instruments

Tartari U
(2006)
Critical issues highlighted by collective Thomson scattering below electron cyclotron resonance in FTU
in Nuclear Fusion

Allan N
(2006)
Beyond the point defect limit: Simulation methods for solid solutions and highly disordered systems
in Computational Materials Science

Joiner N
(2006)
Electron temperature gradient driven transport in a MAST H-mode plasma
in Plasma Physics and Controlled Fusion

Counsell G
(2006)
On the use of a capacitive diaphragm gauge for dust detection in next-step fusion devices
in Review of Scientific Instruments

Hacquin S
(2006)
X-mode reflectometry measurements in the JET plasma core region
in Review of Scientific Instruments

Garcia O
(2006)
Radial interchange motions of plasma filaments
in Physics of Plasmas

Cruz N
(2006)
JET real-time project test-bench software structure
in Fusion Engineering and Design

DERLET P
(2007)
Million-atom molecular dynamics simulations of magnetic iron
in Progress in Materials Science

NGUYENMANH D
(2007)
Environmental dependence of bonding: A challenge for modelling of intermetallics and fusion materials
in Progress in Materials Science

Lönnroth J
(2007)
Effects of ripple-induced ion thermal transport on H-mode plasma performance
in Plasma Physics and Controlled Fusion

Lavrentiev M
(2007)
Monte Carlo study of thermodynamic properties and clustering in the bcc Fe-Cr system
in Physical Review B

AOKI M
(2007)
Atom-based bond-order potentials for modelling mechanical properties of metals
in Progress in Materials Science

Dudarev S
(2007)
Driven mobility of self-interstitial defects under electron irradiation
in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms

Forrest R
(2007)
Statistical analysis of cross sections-A new tool for data validation
in Fusion Engineering and Design

Neu R
(2007)
Investigation of tungsten coatings on graphite and CFC
in Physica Scripta

Mrovec M
(2007)
Bond-order potential for simulations of extended defects in tungsten
in Physical Review B

McKay R
(2007)
Fast Alfven Wave Heating and Acceleration of Ions in a Nonuniform Magnetoplasma
in The Astrophysical Journal

Newton S
(2007)
Collisional bulk ion transport and poloidal rotation driven by neutral beam injection
in Physics of Plasmas

Matthews G
(2007)
Overview of the ITER-like wall project
in Physica Scripta

Lungu C
(2007)
Beryllium coatings on metals for marker tiles at JET: development of process and characterization of layers
in Physica Scripta

Dnestrovskij Y
(2007)
Analysis of pressure profiles and transport simulations of MAST discharges
in Plasma Physics and Controlled Fusion

Duffy D
(2007)
Including the effects of electronic stopping and electron-ion interactions in radiation damage simulations
in Journal of Physics: Condensed Matter

Merrifield J
(2007)
Intermittency, dissipation, and scaling in two-dimensional magnetohydrodynamic turbulence
in Physics of Plasmas

CAWKWELL M
(2007)
Atomistic study of athermal cross-slip and its impact on the mechanical properties of iridium
in Acta Materialia

McDonald D
(2007)
Recent progress on the development and analysis of the ITPA global H-mode confinement database
in Nuclear Fusion

Valovic M
(2007)
On the correlation between density profile and particle flux in H-mode tokamak plasmas and the implication for ITER
in Nuclear Fusion

Loarte A
(2007)
Transient heat loads in current fusion experiments, extrapolation to ITER and consequences for its operation
in Physica Scripta

Cohen R
(2007)
Current and potential distribution in a divertor with toroidally-asymmetric biasing of the divertor plate
in Plasma Physics and Controlled Fusion

Saarelma S
(2007)
MHD stability analysis of ELMs in MAST
in Plasma Physics and Controlled Fusion

Frigione D
(2007)
Pellet injection and high density ITB formation in JET advanced tokamak plasmas
in Nuclear Fusion

Maier H
(2007)
Tungsten and beryllium armour development for the JET ITER-like wall project
in Nuclear Fusion

Hirai T
(2007)
Characterization and heat flux testing of beryllium coatings on Inconel for JET ITER-like wall project
in Physica Scripta

Kirk A
(2007)
Evolution of the pedestal on MAST and the implications for ELM power loadings
in Plasma Physics and Controlled Fusion

Pitts R
(2007)
ELM transport in the JET scrape-off layer
in Nuclear Fusion

Strachan J
(2008)
Modelling of carbon migration during JET 13 C injection experiments
in Nuclear Fusion

Meyer H
(2008)
Active control of the H-mode transition on MAST
in Plasma Physics and Controlled Fusion

De Vries P
(2008)
Effect of toroidal field ripple on plasma rotation in JET
in Nuclear Fusion

Maddison G
(2009)
Dimensionless pedestal identity plasmas on Alcator C-Mod and JET
in Nuclear Fusion

Meyer H
(2009)
Overview of physics results from MAST
in Nuclear Fusion

Llewellyn Smith C
(2009)
The path to fusion power
in The European Physical Journal Special Topics

Cottrell G
(2013)
A survey of plasma facing materials for fusion power plants
in Materials Science and Technology