UK Fusion Programme 2008-2010
Lead Research Organisation:
CCFE/UKAEA
Department Name: Culham Centre for Fusion Energy
Abstract
Fusion is the main energy source of the universe; it is the process that powers the sun and the stars. If it can be harnessed economically on earth, it has the potential to be an important component of the portfolio of measures needed to ensure a secure, environmentally responsible, supply of energy, at a time when fossil fuels will be becoming increasingly expensive. There is increasing realisation of this potential as reflected by the launch of the International Tokamak Experimental Reactor (ITER) project, being built in France, which will be the first fusion device to achieve energy gain and sustained burn.In a fusion reaction, large amounts of energy are released when the nuclei of two light atoms fuse together at extremely high temperatures to create a nucleus of a larger atom. In the most promising way to achieve these conditions on earth, strong magnetic fields in a tokamak configuration are used to control and confine the high temperature plasma.UKAEA's Culham Science Centre in Oxfordshire is one of the world's leading fusion research centres, and contributes to fusion research in two ways: (i) through the UK's own programme focused on the spherical tokamak experiment MAST, and (ii) by contributing to the Joint European Torus (JET) programme. International co-operation is strong with the focus on the International Tokamak Experimental Reactor (ITER). EURATOM part-funds all national programmes in Europe including the UK's.Experimental programmes on the MAST and JET tokamaks are performed to help resolve and refine understanding of key physics issues for ITER. In addition, experimental programmes on MAST focus on testing the potential of the spherical tokamak as a more compact option for future fusion devices. A strong theory and modelling group, utilising parallel- and super-computing facilities, supports the experimental programmes and contributes to the research and development of fusion materials and to studies of conceptual fusion power stations. The UK leads the research and development of two ITER specialist (diagnostic and heating) systems, and participates in several others of these large complex projects.The results of the research are presented in reports and publications, and at conferences, expert groups and specialist committees. Collaborations with researchers in other areas of science and technology are pursued strongly, where the research overlaps with fusion R&D, and increasingly there are fusion researchers in universities with whom UKAEA works.The Engineering and Physical Sciences Research Council (EPSRC) and the European Commission fund, provide advice and monitor the UK fusion programme (some of the European funding / for work on ITER systems - is now channelled through the new Fusion for Energy Agency in Barcelona). The Fusion Advisory Board (FAB) advises EPSRC and UKAEA on the programme and on the longer-term strategy for fusion research at Culham; FAB receives reports from the MAST Programme Advisory Committee, a sub-group on ITER and industry, and an annual UK Fusion Materials Forum.
Organisations
Publications
Kreter A
(2009)
Dynamics of erosion and deposition in tokamaks
in Journal of Nuclear Materials
Coad J
(2009)
Testing of tungsten coatings in JET for the ITER-like wall
in Journal of Nuclear Materials
Andres D
(2019)
Application of the small punch test in combination with the master curve approach for the characterisation of the ductile to brittle transition region
in Journal of Nuclear Materials
Jakubowski M
(2009)
ELM filament interaction with the JET main chamber
in Journal of Nuclear Materials
Harrison J
(2009)
Interpretive modelling of scrape-off plasmas on the MAST tokamak
in Journal of Nuclear Materials
Bonny G
(2009)
Numerical prediction of thermodynamic properties of iron-chromium alloys using semi-empirical cohesive models: The state of the art
in Journal of Nuclear Materials
De Temmerman G
(2009)
Deuterium retention and release in tungsten co-deposited layers
in Journal of Nuclear Materials
Uytdenhouwen I
(2009)
Dimple optimization for XPS characterization of TEXTOR tile depositions
in Journal of Nuclear Materials
Tsui C
(2009)
Temperature dependence of D removal from JET codeposits by thermo-oxidation
in Journal of Nuclear Materials
Marot L
(2009)
Reactivity of rhodium during co-deposition of rhodium and carbon
in Journal of Nuclear Materials
Chiesa S
(2009)
Atomistic calculation of elastic constants of alpha-iron containing point defects by means of magnetic interatomic potentials
in Journal of Nuclear Materials
Roth J
(2009)
Recent analysis of key plasma wall interactions issues for ITER
in Journal of Nuclear Materials
Pitts R
(2009)
The impact of large ELMs on JET
in Journal of Nuclear Materials
Rapp J
(2009)
Highly radiating type-III ELMy H-mode with low plasma core pollution
in Journal of Nuclear Materials
Riccardo V
(2009)
Engineering challenges of the JET ITER-like Wall
in Journal of Nuclear Materials
Isoardi L
(2009)
Modelling SOL flow pattern spreading in the edge plasma
in Journal of Nuclear Materials
Rozhansky V
(2009)
Simulation of H-modes discharges in ASDEX-Upgrade and MAST
in Journal of Nuclear Materials
Zagórski R
(2009)
Self-consistent modeling of impurity seeded JET advanced tokamak scenarios
in Journal of Nuclear Materials
Brezinsek S
(2009)
The impact of divertor detachment on carbon sources in JET L-mode discharges
in Journal of Nuclear Materials
Krieger K
(2009)
Be wall sources and migration in L-mode discharges after Be evaporation in the JET tokamak
in Journal of Nuclear Materials
Liang Y
(2009)
Active control of edge localized modes with a low n perturbation fields in the JET tokamak
in Journal of Nuclear Materials
Huber A
(2009)
Plasma radiation distribution and radiation loads onto the vessel during transient events in JET
in Journal of Nuclear Materials
Silva C
(2009)
Intermittent transport in the JET far-SOL
in Journal of Nuclear Materials
Tamain P
(2009)
3D modelling of edge parallel flow asymmetries
in Journal of Nuclear Materials
Alonso J
(2009)
Fast visible imaging of ELM-wall interactions on JET
in Journal of Nuclear Materials
Jachmich S
(2009)
Effect of external perturbation fields on divertor particle and heat loads during ELMs at JET
in Journal of Nuclear Materials
Duffy D
(2009)
Including electronic effects in damage cascade simulations
in Journal of Nuclear Materials
Mertens P
(2009)
Development and qualification of a bulk tungsten divertor row for JET
in Journal of Nuclear Materials
Van Rooij G
(2009)
Appearance of hot spots due to deposits in the JET MKII-HD outer divertor
in Journal of Nuclear Materials
Rubel M
(2009)
An overview of a comprehensive First Mirror Test for ITER at JET
in Journal of Nuclear Materials
Arnoux G
(2009)
Divertor heat load in ITER-like advanced tokamak scenarios on JET
in Journal of Nuclear Materials
Fundamenski W
(2009)
Power and particle exhaust in tokamaks: Integration of plasma scenarios with plasma facing materials and components
in Journal of Nuclear Materials
Lehnen M
(2009)
Runaway generation during disruptions in JET and TEXTOR
in Journal of Nuclear Materials
Cook I
(2009)
Evolving targets for DEMO: Implications for materials development
in Journal of Nuclear Materials
V Kiptily (Co-Author)
(2008)
Super-heated fluid detectors for neutron measurements at JET
in Journal of Optoelectronics and Advanced Materials
V Kiptily (Co-Author)
(2008)
Mechanical design of the upgraded JET gamma-ray cameras
in Journal of Optoelectronics and Advanced Materials
Sjöstrand H
(2008)
Triton burn-up neutron emission in JET low current plasmas
in Journal of Physics D: Applied Physics
Itoh N
(2009)
Making tracks: electronic excitation roles in forming swift heavy ion tracks.
in Journal of physics. Condensed matter : an Institute of Physics journal
Gilbert M
(2008)
Structure and metastability of mesoscopic vacancy and interstitial loop defects in iron and tungsten
in Journal of Physics: Condensed Matter
Kirk A
(2008)
Comparison of the spatial and temporal structure of type-I ELMs
in Journal of Physics: Conference Series
Michael C
(2008)
Change of fluctuation properties during non-local temperature rise in LHD from 2d phase contrast imaging
in Journal of Physics: Conference Series
Valovic M
(2008)
Particle confinement of pellet-fuelled H-mode plasmas in the Mega Ampere Spherical Tokamak
in Journal of Physics: Conference Series
Oyama N
(2008)
Effect of toroidal field ripple and toroidal rotation on H-mode performance and ELM characteristics in JET/JT-60U similarity experiments
in Journal of Physics: Conference Series
Meyer H
(2008)
The structure, evolution and role of the radial edge electric field in H-mode and L-mode on MAST
in Journal of Physics: Conference Series
Sircombe N
(2008)
On the role of electron acoustic waves and beam acoustic modes in laser backscatter from plasmas
in Journal of Physics: Conference Series
Nicholls R
(2008)
How the bond length can affect C 70 DOS and EEL spectra
in Journal of Physics: Conference Series
Kirk A
(2008)
Comparison of the filament behaviour observed during type I ELMs in ASDEX upgrade and MAST
in Journal of Physics: Conference Series
AYED N
(2009)
Alfvén eigenmodes in magnetic X-point configurations with strong longitudinal fields
in Journal of Plasma Physics
Cackett A
(2019)
Spherical indentation of copper: Crystal plasticity vs experiment
in Materialia
Duffy D
(2009)
Modeling plasma facing materials for fusion power
in Materials Today
Description | Fusion research is focused on ITER (the international experiment being built in France) followed by a demonstration power station (DEMO). The Culham Centre for Fusion Energy (CCFE) is a world-leading fusion research centre. Some highlights from the last two years are summarised below (many the result of collaborations with universities and overseas laboratories). Additional information is in Annual Reports (http://www.ccfe.ac.uk/annual_reports.aspx). Reacting plasmas: The UK programme, funded by EPSRC and EURATOM, is focused on the MAST experiment. Physics studies benefited from high power heating systems and improvements to diagnostics. A major upgrade to the system to measure temperature and density profiles (part funded by York University) was completed and provides unmatched spatial resolution. Important progress from both MAST, and the linked Theory and Modelling programme, has been made in several key areas directly relevant to optimising ITER performance:- energy confinement, enabling more reliable prediction of plasma performance in future devices; control of potentially damaging instabilities; improved understanding of performance limiting core and edge plasma instabilities; gas injection to mitigate the effects of rapid plasma terminations (disruptions), etc. CCFE has contributed to the European JET programme, with notable achievements including operation at high power and current, and substantial progress in scenarios that are suitable for steady state operation in ITER. The EPSRC grant pays the UK contribution to JET operation. Materials: Work included: development of techniques for modelling iron-chromium alloys in the high-temperature limit; modelling of steels and tungsten to compare with experimental data from Oxford University; Ion Beam Analysis measurements of erosion, deposition and hydrogen-isotope retention in tiles removed from the JET tokamak. ITER Systems: CCFE has secured lead roles in two major grants to develop ITER heating systems, and leads a consortium to bid for the LIDAR temperature and density measurement system. CCFE has smaller roles in several other areas. Optimised power plants: Work has concentrated on a detailed assessment of the advantages and disadvantages of pulsed and steady-state DEMOs. Several clear advantages in a steady-state device were identified, however the potential simplification in a pulsed device (greatly reduced need for current drive) is a significant counter-advantage. Conceptual design studies of a spherical tokamak Component Test Facility have continued. A big challenge for any fusion system is dealing with the large exhaust power from burning plasmas. One novel promising option, for both DEMO and CTF, which will be part of the MAST upgrade, is the "Super-X" expanded divertor. Major upgrade to MAST: the design has been developed. The purpose is to give higher performance, longer pulse plasmas allowing definitive tests of the physics of an ST-based CTF, and more exacting studies of ITER physics. In late 2009, RCUK reviewed UK fusion research and following this EPSRC approved funding for the upgrade. In addition CCFE has promoted industry involvement in fusion and significantly assisted UK companies in winning ITER business, increased university involvement (e.g. PhDs), and developed its skills-base for an increased emphasis on technology as recommended by the RCUK review. |
Exploitation Route | In addition CCFE has promoted industry involvement in fusion and significantly assisted UK companies in winning ITER business, increased university involvement (e.g. PhDs), and developed its skills-base for an increased emphasis on technology as recommended by the RCUK review. |
Sectors | Energy |
URL | http://www.ccfe.ac.uk/annual_reports.aspx |
Description | As well as its long term task, developing fusion power, CCFE has promoted industry involvement in fusion. |
First Year Of Impact | 2008 |
Sector | Energy |
Impact Types | Economic |