University of Bristol - Equipment Account
Lead Research Organisation:
University of Bristol
Department Name: Finance Office
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Publications
Zhu C
(2018)
High Stiffness Cellulose Fibers from Low Molecular Weight Microcrystalline Cellulose Solutions Using DMSO as Co-Solvent with Ionic Liquid
in Macromolecular Materials and Engineering
Zhu C
(2016)
High Modulus Regenerated Cellulose Fibers Spun from a Low Molecular Weight Microcrystalline Cellulose Solution
in ACS Sustainable Chemistry & Engineering
Zhou L
(2019)
Graphene surface structure in aqueous media: Evidence for an air-bubble layer and ion adsorption
in Carbon
Zhang L
(2017)
Gelatin freeze casting of biomimetic titanium alloy with anisotropic and gradient pore structure.
in Biomedical materials (Bristol, England)
Zhang C
(2018)
Phase Noise in Full-Duplex Radios Using Off-the-Shelf Oscillators
in IEEE Wireless Communications Letters
Wrobel R
(2014)
Derivation and Scaling of AC Copper Loss in Thermal Modeling of Electrical Machines
in IEEE Transactions on Industrial Electronics
Wood NJ
(2015)
Chlorhexidine hexametaphosphate nanoparticles as a novel antimicrobial coating for dental implants.
in Journal of materials science. Materials in medicine
Warzok F
(2016)
Experimental characterisation of fatigue damage in single Z-pins
in Composites Part A: Applied Science and Manufacturing
Warren AD
(2015)
Comparison between magnetic force microscopy and electron back-scatter diffraction for ferrite quantification in type 321 stainless steel.
in Ultramicroscopy
Description | This account currently includes the following: Composites Innovation: from Atoms to Applications Power Electronics Capital Funding High-resolution scanning electron microscope (HRSEM) The above equipment has been successfully procured, installed and commissioned and is in use supporting world leading Engineering and Physical Sciences research |
Exploitation Route | The equipment will continue to be used to support world leading Engineering and Physical Sciences research. |
Sectors | Aerospace Defence and Marine Chemicals Electronics Energy Manufacturing including Industrial Biotechology |
Description | Outreach activities have included the SEM being used to produce a series of YouTube videos on microscience with the BBC (https://www.youtube.com/playlist?list=PLtra-MWzIvZHnCrVgNbE5BPDo7jKXY4uM) and the AFM featuring in a video on nanomaterials on Things You Might Not Know, Tom Scott You Tube channel 'Things You Might Not Know' (https://www.youtube.com/watch?v=t60EfnqZKrQ). Industrial impact has arisen directly through short term projects to support solving formulation and supply-chain problems for companies and indirectly through the support of the industrial projects of our internal users (eg BCFN Syngenta-Bridge project) |
First Year Of Impact | 2014 |
Sector | Chemicals,Education,Other |
Impact Types | Societal Economic |
Description | EPSRC Future Composites Manufacturing Hub (the instrumented process vessel will be extensively used by this) |
Amount | £10,296,792 (GBP) |
Funding ID | EP/P006701/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 01/2017 |
End | 12/2023 |
Description | EPSRC Impact Acceleration Account Commercialisation Award to Tom Scott for Commercialisation of diamond-based radiation detectors for civil nuclear applications |
Amount | £75,712 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 12/2015 |
End | 03/2017 |
Description | EPSRC Impact Acceleration Account Startegic Engagement Award to Tom Scott for A coherent approach to marketing our Materials Research Capability |
Amount | £90,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 11/2015 |
End | 03/2017 |
Title | CCDC 1562964: Experimental Crystal Structure Determination |
Description | Related Article: Benjamin M. Mills, Zhecheng Shao, Stephanie R. Flynn, Patrice Rannou, David M. Lindsay, Natalie Fey, Charl F. J. Faul|2018|MSDE|4|103|doi:10.1039/C8ME00082D |
Type Of Material | Database/Collection of data |
Year Produced | 2018 |
Provided To Others? | Yes |
URL | http://www.ccdc.cam.ac.uk/services/structure_request?id=doi:10.5517/ccdc.csd.cc1pgd6r&sid=DataCite |
Title | CCDC 1840214: Experimental Crystal Structure Determination |
Description | Related Article: Ana M. Fuentes-Caparrós, Francisco de Paula Gómez-Franco, Bart Dietrich, Claire Wilson, Christopher Brasnett, Annela Seddon and Dave J. Adams|2019|Nanoscale|11|3275|doi:10.1039/C8NR09423C |
Type Of Material | Database/Collection of data |
Year Produced | 2019 |
Provided To Others? | Yes |
URL | http://www.ccdc.cam.ac.uk/services/structure_request?id=doi:10.5517/ccdc.csd.cc1zrwrc&sid=DataCite |
Title | CCDC 2053987: Experimental Crystal Structure Determination |
Description | Related Article: Demetra Giuri, Libby J. Marshall, Claire Wilson, Annela Seddon, Dave J. Adams|2021|Soft Matter|17|7221|doi:10.1039/D1SM00770J |
Type Of Material | Database/Collection of data |
Year Produced | 2021 |
Provided To Others? | Yes |
URL | http://www.ccdc.cam.ac.uk/services/structure_request?id=doi:10.5517/ccdc.csd.cc26ybn5&sid=DataCite |
Title | Correlating Orbital Composition and Activity of LaMnxNi1-xO3 Nanostructures Towards Oxygen Electrocatalysis |
Description | Detailed correlation between electronic structure of transition metal oxides and their oxygen electrocatalytic activity |
Type Of Material | Database/Collection of data |
Year Produced | 2022 |
Provided To Others? | Yes |
URL | https://data.bris.ac.uk/data/dataset/3544nql45ox1o2ptxhejnmmzjk/ |
Title | Data from "Anisotropic viscoelastic phase separation in polydisperse hard rods: non-sticky gelation" |
Description | Data supporting publication "Anisotropic viscoelastic phase separation in polydisperse hard rods: non-sticky gelation" by Ferreiro et al., PNAS 2020 |
Type Of Material | Database/Collection of data |
Year Produced | 2020 |
Provided To Others? | Yes |
URL | https://data.bris.ac.uk/data/dataset/1gfhyy3l2qipg2t8wg6t6f1c0k/ |
Title | Data from AlO diamond termination paper in PSSB |
Description | This is the data repository for the paper 'Experimental Studies of Electron Affinity and Work Function from Aluminium on Oxidised Diamond (100) and (111) Surfaces' by Michael C. James, Mattia Cattelan, Neil A. Fox, Rui F. Silva, Ricardo M. Silva and Paul W. May. Physica Status Solidi B (2021). |
Type Of Material | Database/Collection of data |
Year Produced | 2021 |
Provided To Others? | Yes |
URL | https://data.bris.ac.uk/data/dataset/3ohhlefvl13zr23pcl9u55a21f/ |
Title | Data from photoluminescence spectroscopy, admittance spectroscopy, photoelectron emission microscopy, current-voltage characteristics, and spectral response of quantum efficiency measurements on Cu2ZnZnSnS4 (CZTS) films and solar cells as a function of... |
Description | This is the dataset used in the journal article to be published in American Chemical Society's Applied Energy Materials. Article Title: Mapping the Energetics of Defect States in Cu2ZnSnS4 films and the Impact of Sb DopingAuthors: Devendra Tiwari, Michael V. Yakushev, Tristan Koehler, Mattia Cattelan, Neil Fox, Robert W. Martin, Reiner Klenk and David J FerminDOI: https://10.1021/acsaem.1c03729 The dataset was produced in collaboration with colleagues from University of Bristol, Strathclyde University and Helmholtz Zentrum Berlin. The dataset contains .csv files and can be accessed can be using any text editor or any spreadsheet software. |
Type Of Material | Database/Collection of data |
Year Produced | 2022 |
Provided To Others? | Yes |
URL | https://figshare.northumbria.ac.uk/articles/dataset/Data_from_photoluminescence_spectroscopy_admitta... |
Title | Dataset for: Modelling the filtration efficiency of a woven fabric: The role of multiple lengthscales |
Description | This is data for: "Modelling the filtration efficiency of a woven fabric: The role of multiple lengthscales", on arXiv Files are (this is also in README file): 1) FinalFused.tif : stack of slices taken with confocal at Bristol by Ioatzin Rios de Anda. This is the imaging data of the fabric used 2) processDataTo3D_PAPER.py : Python code to analyse 1) to produce mask of fibre voxels needed for LB simulation, by Jake Wilkins 3) LBregionstack.tiff : image stack for region in LB simulations 4) masknx330ny280nz462_t10.txt : mask in right format to be read in to Palabos LB code to specify which voxels are fibre and so need bounce-back 5) Ioatzin3D.cpp : C++ code for Palabos LB. NB need Palabos LB code: https://palabos.unige.ch/, should go in directory "~/palabos-v2.2.0/examples/Ioatzin/3D ". Needs 4) 6) make_pkl.py : converts output of LB code into Python pickled format for .py codes below. 7) IoatzinDarcy_pkl.py : takes pickled output of LB code and computes Darcy k etc 8) traj2_pkledge.py : computes trajectories of particles and so filtration efficiency, needs pickled output of LBC code and 9) 9) lattice_params.yaml : parameter values for 7) and 8) 10) eff_filter_edges.txt : filtration efficiencies computed by 8) WITH inertia 11) eff_filter0Stokes.txt : filtration efficiencies computed by 8) WITHOUT inertia 12) plot_filtration.py : plots 10) and 11) 13) Final_render.mp4 : rotating animation showing region simulated by LB code, by Jake Wilkins 14) alpha_ofz.txt : alpha - fraction of fibres voxels as function of z 15) plot_justalpha.py : plots 14) 16) vtk01.vti : flow field velocity field in vti format - as used by Paraview 17) vel3D.pkl : flow field velocity field in Python's pkl format 18) slice_heatmap.py : produces heatmap of velocities in xy slice through the flow field 19) plot_sigma_streamlines.py : plots Sigma (curvature lengthscale) from 20), 21), 22), 23) 20) stream4.txt: streamline for flow field 21) stream5.txt: streamline for flow field 22) stream6.txt: streamline for flow field 23) stream7.txt: streamline for flow field 24) plot_Stokes.py : plots Stokes number as function of particle diameter 25) 0traj20.0_47.xyz : trajectory in format that Paraview can read 26) intraj20.0_47.xyz : another trajectory 27) streamlines_pkl.py : calculates streamlines, eg 20), 21), 22) and 23) 28) this README file Abstract of that work: During the COVID-19 pandemic, many millions have worn masks made of woven fabric, to reduce the risk of transmission of COVID-19. Masks are essentially air filters worn on the face, that should filter out as many of the dangerous particles as possible. Here the dangerous particles are the droplets containing virus that are exhaled by an infected person. Woven fabric is unlike the material used in standard air filters. Woven fabric consists of fibres twisted together into yarns that are then woven into fabric. There are therefore two lengthscales: the diameters of: (i) the fibre and (ii) the yarn. Standard air filters have only (i). To understand how woven fabrics filter, we have used confocal microscopy to take three dimensional images of woven fabric. We then used the image to perform Lattice Boltzmann simulations of the air flow through fabric. With this flow field we calculated the filtration efficiency for particles around a micrometre in diameter. We find that for particles in this size range, filtration efficiency is low ($\sim 10\%$) but increases with increasing particle size. These efficiencies are comparable to measurements made for fabrics. The low efficiency is due to most of the air flow being channeled through relatively large (tens of micrometres across) inter-yarn pores. So we conclude that our sampled fabric is expected to filter poorly due to the hierarchical structure of woven fabrics. |
Type Of Material | Database/Collection of data |
Year Produced | 2021 |
Provided To Others? | Yes |
URL | https://zenodo.org/record/5552356 |
Title | Dataset for: X-ray Absorption Spectroscopy and Electrochemical Studies of Pt-Sn Electrocatalysts |
Description | This dataset supports the thesis entitled 'X-ray Absorption Spectroscopy and Electrochemical Studies of Pt-Sn Electrocatalysts'. |
Type Of Material | Database/Collection of data |
Year Produced | 2022 |
Provided To Others? | Yes |
URL | http://eprints.soton.ac.uk/id/eprint/447389 |
Title | High Interfacial Hole-Transfer Efficiency at GaFeO3 Thin Film Photoanodes |
Description | Data associated with the article entitled: 'High Interfacial Hole-Transfer Efficiency at GaFeO3 Thin Film Photoanodes' published in the journal Advanced Energy Materials DO: 10.1002/aenm.202002784I |
Type Of Material | Database/Collection of data |
Year Produced | 2020 |
Provided To Others? | Yes |
URL | https://data.bris.ac.uk/data/dataset/c4w8vwn8xfr2kozw9k8lb7o1/ |
Title | Mapping Shunting Paths at the Surface of Cu2ZnSn(S,Se)4 Films via Energy-Filtered Photoemission Microscopy |
Description | This deposition includes the data of the experiments and calculations used and presented in the article published in the Cell press journal: iScience titled:"Mapping Shunting Paths at the Surface of Cu2ZnSn(S,Se)4 Films via Energy-Filtered Photoemission Microscopy" authored by Devendra Tiwari, Mattia Cattelan, Robert L. Harniman, Andrei Sarua, Ali Abbas, Jake W. Bowers, Neil A. Fox, David J. Fermin. DOI: 10.1016/j.isci.2018.10.004 |
Type Of Material | Database/Collection of data |
Year Produced | 2018 |
Provided To Others? | Yes |
URL | https://data.bris.ac.uk/data/dataset/3ms4y4q5ois072dq5vtfbtqnrt/ |
Title | The Impact of Sb and Na Doping on the Surface Electronic Landscape of Cu2ZnSnS4 Thin-Films |
Description | This deposition includes the data of the experiments and calculations used and presented in the article published in the Journal: ACS energy letters, Authors: Devendra Tiwari, Mattia Cattelan, Robert L. Harniman, Andrei Sarua, Neil Fox, Tristan Koehler, Reiner Klenk and David J Fermin, DOI: https://10.1021/acsenergylett.8b02081 |
Type Of Material | Database/Collection of data |
Year Produced | 2018 |
Provided To Others? | Yes |
URL | https://data.bris.ac.uk/data/dataset/24jmymb29xwli2t9uykgo7swgt/ |
Description | Enabling Sharing access to ultra-high sensitivity NMR spectroscopy for Bath University |
Organisation | University of Bath |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Dr Dan Pantos has been using the 13C-cryoprobe and spectrometer to analyse samples which are completely inaccessible using the existing Bath NMR capabilities (<1 milligram of large molecules). This has further led to data being obtained with Bristol's 600MHz 1H-cryoprobe system, which has enabled us to measure data on even more demanding samples (<500micrograms of large molecules). |
Collaborator Contribution | Dr Dan Pantos has been using the 13C-cryoprobe and spectrometer to analyse samples which are completely inaccessible using the existing Bath NMR capabilities (<1 milligram of large molecules). This has further led to data being obtained with Bristol's 600MHz 1H-cryoprobe system, which has enabled us to measure data on even more demanding samples (<500micrograms of large molecules). |
Impact | Data has been obtained with Bristol's 600MHz 1H-cryoprobe system, which has enabled us to measure data on even more demanding samples (<500micrograms of large molecules). |
Start Year | 2015 |
Description | Rolls-Royce PLC, Advanced Remanufacturing Technology Centre (ARTC), University of Bristol |
Organisation | Advanced Remanufacturing Technology Centre |
Country | Singapore |
Sector | Private |
PI Contribution | A partnership between Rolls-Royce PLC, Advanced Remanufacturing Technology Centre (ARTC) in Singapore and ourselves started in March 2014 and continues today. ARTC are now engineering our development to be an on-line inspection tool for Rolls-Royce PLC for the inspection of turbine blades. |
Collaborator Contribution | . |
Impact | ARTC are now engineering our development to be an on-line inspection tool for Rolls-Royce PLC for the inspection of turbine blades. |
Start Year | 2014 |
Description | Rolls-Royce PLC, Advanced Remanufacturing Technology Centre (ARTC), University of Bristol |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | A partnership between Rolls-Royce PLC, Advanced Remanufacturing Technology Centre (ARTC) in Singapore and ourselves started in March 2014 and continues today. ARTC are now engineering our development to be an on-line inspection tool for Rolls-Royce PLC for the inspection of turbine blades. |
Collaborator Contribution | . |
Impact | ARTC are now engineering our development to be an on-line inspection tool for Rolls-Royce PLC for the inspection of turbine blades. |
Start Year | 2014 |