Experimental Equipment Call
Lead Research Organisation:
University of Sheffield
Department Name: Physics and Astronomy
Abstract
The research activity that will be supported by this proposal supports a wide range of advanced materials research and will focus on seven key areas including:
*High Speed Additive Manufacturing
*Fabrication and Characterisation of Functional Molecular Films
*New Frontiers in Material Characterisation
*Nuclear Materials
*Advanced Nanomaterials and Devices
*Polymer Science, Soft Matter and Colloids
*Functional Property Characterisation
*High Speed Additive Manufacturing
*Fabrication and Characterisation of Functional Molecular Films
*New Frontiers in Material Characterisation
*Nuclear Materials
*Advanced Nanomaterials and Devices
*Polymer Science, Soft Matter and Colloids
*Functional Property Characterisation
Planned Impact
The experimental equipment detailed in this proposal will deliver a range of benefits to the beneficiaries outlined below:
Firstly, industrial partners (both new and with whom the University already maintains close and productive relationships) will benefit from direct access to otherwise unobtainable cutting-edge equipment, as well as to the outputs/results of research conducted Sheffield academics and third parties on this equipment. This is expected to: offer greater design freedom for product designers and manufacturers by eliminating prohibitive up front tooling costs; remove the key barriers to wider adoption of additive manufacturing, i.e. cost and speed of production; generate new IP and new materials for fields such as energy, optical devices and photonic applications. The availability of this equipment is also expected to attract interest from new partners and act as a catalyst for new partnerships and collaborations.
SMEs in particular have already expressed interest in developing new types of product and optimising their quality using this new equipment, which would otherwise be beyond their reach. Among the names already interested in the commercial opportunities on offer are Attocube Systems, Helia Photonics, M2 Lasers and Toshiba Europe.
Secondly, a large number of the projects planned for the proposed equipment offer strong environmental benefits e.g. lower emissions by reducing weight in transport applications and offering digital 'transportation' of CAD files instead of transportation of products; and low-carbon technology using thin film techniques such as low-cost photovoltaics, low-energy lighting and thin-film batteries.
Care will be taken to ensure that the new equipment will also benefit students of the University at all levels but particularly at PhD and Early career levels giving them valuable practical and technical skills and experience on cutting edge machinery that are much sought after by (and of great benefit to) industrial employers.
By offering access, such as Dual Beam FIB beam time to other regional universities, the scientific and research benefits of the equipment will be shared and maximised and concrete opportunities for new collaborative and multi-disciplinary projects to foster innovation in this expanding sector will be.
The participating teams boast strong track records in communication and public engagement that will ensure that interested members of the public will be given every chance to find out more about a new and exciting field with myriad potential applications, in engaging and vivid ways.
Firstly, industrial partners (both new and with whom the University already maintains close and productive relationships) will benefit from direct access to otherwise unobtainable cutting-edge equipment, as well as to the outputs/results of research conducted Sheffield academics and third parties on this equipment. This is expected to: offer greater design freedom for product designers and manufacturers by eliminating prohibitive up front tooling costs; remove the key barriers to wider adoption of additive manufacturing, i.e. cost and speed of production; generate new IP and new materials for fields such as energy, optical devices and photonic applications. The availability of this equipment is also expected to attract interest from new partners and act as a catalyst for new partnerships and collaborations.
SMEs in particular have already expressed interest in developing new types of product and optimising their quality using this new equipment, which would otherwise be beyond their reach. Among the names already interested in the commercial opportunities on offer are Attocube Systems, Helia Photonics, M2 Lasers and Toshiba Europe.
Secondly, a large number of the projects planned for the proposed equipment offer strong environmental benefits e.g. lower emissions by reducing weight in transport applications and offering digital 'transportation' of CAD files instead of transportation of products; and low-carbon technology using thin film techniques such as low-cost photovoltaics, low-energy lighting and thin-film batteries.
Care will be taken to ensure that the new equipment will also benefit students of the University at all levels but particularly at PhD and Early career levels giving them valuable practical and technical skills and experience on cutting edge machinery that are much sought after by (and of great benefit to) industrial employers.
By offering access, such as Dual Beam FIB beam time to other regional universities, the scientific and research benefits of the equipment will be shared and maximised and concrete opportunities for new collaborative and multi-disciplinary projects to foster innovation in this expanding sector will be.
The participating teams boast strong track records in communication and public engagement that will ensure that interested members of the public will be given every chance to find out more about a new and exciting field with myriad potential applications, in engaging and vivid ways.
People |
ORCID iD |
Richard Jones (Principal Investigator) |
Publications
Zolgharnein J
(2017)
Crossed mixture process design optimization and adsorption characterization of multi-metal (Cu(II), Zn(II) and Ni(II)) removal by modified Buxus sempervirens tree leaves
in Journal of the Taiwan Institute of Chemical Engineers
Zhang Y
(2018)
Effect of fullerene acceptor on the performance of solar cells based on PffBT4T-2OD.
in Physical chemistry chemical physics : PCCP
Zhang Y
(2017)
Understanding and controlling morphology evolution via DIO plasticization in PffBT4T-2OD/PC71BM devices.
in Scientific reports
Zhang Y
(2016)
PCDTBT based solar cells: one year of operation under real-world conditions.
in Scientific reports
Zhang Y
(2017)
Comparative indoor and outdoor stability measurements of polymer based solar cells.
in Scientific reports
Wong-Stringer M
(2017)
Efficient perovskite photovoltaic devices using chemically doped PCDTBT as a hole-transport material
in Journal of Materials Chemistry A
Warren NJ
(2018)
Critical Dependence of Molecular Weight on Thermoresponsive Behavior of Diblock Copolymer Worm Gels in Aqueous Solution.
in Macromolecules
Rymaruk MJ
(2021)
Small-Angle X-Ray Scattering Studies of Block Copolymer Nano-Objects: Formation of Ordered Phases in Concentrated Solution During Polymerization-Induced Self-Assembly.
in Angewandte Chemie (International ed. in English)
Robshaw T
(2019)
Highly efficient fluoride extraction from simulant leachate of spent potlining via La-loaded chelating resin. An equilibrium study.
in Journal of hazardous materials
O'Brien C
(2021)
Control of the aqueous solubility of cellulose by hydroxyl group substitution and its effect on processing
in Polymer
Neal TJ
(2021)
Control of Particle Size in the Self-Assembly of Amphiphilic Statistical Copolymers.
in Macromolecules
Neal T
(2018)
Self-Assembly of Amphiphilic Statistical Copolymers and Their Aqueous Rheological Properties
in Macromolecules
Mohamad D
(2016)
Spray-Cast Multilayer Organometal Perovskite Solar Cells Fabricated in Air
in Advanced Energy Materials
Lishchuk A
(2018)
A synthetic biological quantum optical system.
in Nanoscale
Lishchuk A
(2019)
Turning the challenge of quantum biology on its head: biological control of quantum optical systems.
in Faraday discussions
Levenstein MA
(2022)
Serial small- and wide-angle X-ray scattering with laboratory sources.
in IUCrJ
Laity PR
(2022)
Seeking Solvation: Exploring the Role of Protein Hydration in Silk Gelation.
in Molecules (Basel, Switzerland)
Jennings J
(2018)
Stearyl Methacrylate-Based Polymers as Crystal Habit Modifiers for Triacylglycerols
in Crystal Growth & Design
Hunter SJ
(2020)
How Do Charged End-Groups on the Steric Stabilizer Block Influence the Formation and Long-Term Stability of Pickering Nanoemulsions Prepared Using Sterically Stabilized Diblock Copolymer Nanoparticles?
in Langmuir : the ACS journal of surfaces and colloids
Hunter SJ
(2020)
Effect of Salt on the Formation and Stability of Water-in-Oil Pickering Nanoemulsions Stabilized by Diblock Copolymer Nanoparticles.
in Langmuir : the ACS journal of surfaces and colloids
Dunderdale GJ
(2020)
Flow-induced crystallisation of polymers from aqueous solution.
in Nature communications
Derry MJ
(2019)
Correction: Thermoreversible crystallization-driven aggregation of diblock copolymer nanoparticles in mineral oil.
in Chemical science
Derry MJ
(2018)
Thermoreversible crystallization-driven aggregation of diblock copolymer nanoparticles in mineral oil.
in Chemical science
Cosby J
(2021)
Co-assembly and Structure of Sodium Dodecylsulfate and other n-Alkyl Sulfates in Glycerol: n-Alkyl Sulfate-Glycerol Crystal Phase.
in Journal of colloid and interface science
Cockram AA
(2017)
Effect of Monomer Solubility on the Evolution of Copolymer Morphology during Polymerization-Induced Self-Assembly in Aqueous Solution.
in Macromolecules
Claronino P
(2023)
Organic copolymer lasing from single defect microcavity fabricated using laser patterning
in Journal of Materials Chemistry C
Cassella E
(2023)
Ultrasonic Spray Deposition of a Passivating Agent for Spray-Coated, Methylammonium-Free Perovskite Solar Cells
in Solar RRL
Canning SL
(2017)
pH-Responsive Schizophrenic Diblock Copolymers Prepared by Polymerization-Induced Self-Assembly.
in Macromolecules
Byard SJ
(2020)
Unique aqueous self-assembly behavior of a thermoresponsive diblock copolymer.
in Chemical science
Bracher C
(2017)
Degradation of inverted architecture CH 3 NH 3 PbI 3- x C l x perovskite solar cells due to trapped moisture
in Energy Science & Engineering
Bishop JE
(2017)
Spray-cast multilayer perovskite solar cells with an active-area of 1.5 cm2.
in Scientific reports
Bianco A
(2017)
Control of the Porous Structure of Polystyrene Particles Obtained by Nonsolvent Induced Phase Separation
in Langmuir
Bernardo G
(2018)
Does 1,8-diiodooctane affect the aggregation state of PC71BM in solution?
in Royal Society open science
Bento A
(2021)
Quantification of Structure-Property Relationships for Plant Polyesters Reveals Suberin and Cutin Idiosyncrasies.
in ACS sustainable chemistry & engineering
Beattie DL
(2021)
Rational synthesis of novel biocompatible thermoresponsive block copolymer worm gels.
in Soft matter
Batey DJ
(2021)
X-Ray Ptychography with a Laboratory Source.
in Physical review letters
Batey D
(2021)
X-ray Ptychography with a Laboratory Source
Althagafi T
(2016)
A New Precursor Route to Semiconducting Zinc Oxide
in IEEE Electron Device Letters
Description | The new multidisciplinary collaborations that the equipment has led to have led to new engagements with non-academic users, for example the multinational coatings company AkzoNobel and the Cambridge based SME Eight19, and has consolidated existing collaborations, e.g. with Sellafield Ltd., the Nuclear Decommissioning Authority and National Nuclear Laboratory. |
First Year Of Impact | 2017 |
Sector | Chemicals,Digital/Communication/Information Technologies (including Software),Electronics,Energy,Manufacturing, including Industrial Biotechology |
Description | EPSRC Impact Acceleration Account via University of Sheffield IIKE |
Amount | £25,000 (GBP) |
Funding ID | EP/K503812/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 06/2016 |
End | 03/2017 |
Description | Akzo-Nobel collaboration |
Organisation | AkzoNobel |
Department | AkzoNobel UK |
Country | United Kingdom |
Sector | Private |
PI Contribution | We plan to help our industrial partner understand and improve the development of a high value commercial product |
Collaborator Contribution | Materials, expertise and market access. |
Impact | Akzo-Nobel Marine coatings division to fund a CDT phd studentship in the area of anti-fouling research. This studentship (£40k) will start in September 2017 |
Start Year | 2016 |
Description | Big Solar Ltd collaboration |
Organisation | Big Solar Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Sheffield have been working with back-contact groove architecture electrodes supplied by Big Solar Ltd, and have been exploring their combination with perovskite semiconductors. We have been making and testing devices, and helping Big Solar tune the electronic properties of their n and p electrode materials. |
Collaborator Contribution | Big solar have fabricated the back-contact electrode substrates, and have provided advice and guidance about the direction of the project. |
Impact | No technical outputs - it is commercially sensitive. |
Start Year | 2016 |