Novel Brazing Filler Metals using High Entropy Alloys
Lead Research Organisation:
University of Sheffield
Department Name: Materials Science and Engineering
Abstract
Brazing is an important process for joining materials. It is quick and permits high strength, and is unique among high-temperature permanent joining methods in leaving the materials being joined largely unchanged; hence it can make complex joints and join dissimilar and difficult to weld materials (e.g. metals to ceramics and high Al/Ti content nickel superalloys respectively). It works by having a specific alloy, called a Brazing Filler Metal (BFM), introduced between the parts to be joined. Thermal treatment of the assembly is used to melt and solidify the BFM, forming a bond. These BFMs are designed specifically for different types of bonding situation, and can have many different compositions.
Brazing is a key technology for many advanced applications, including the aerospace and nuclear sectors, but it has limitations. As the service requirements become more demanding, and base metals are refined, new BFMs must be developed. Some specific problems facing brazing technology today include:
1) Widening the spectrum of materials that can be joined (including higher temperature materials, bonding metals to ceramics, and also lower process temperatures for materials that cannot survive those of existing brazing alloys; functional ceramics and high strength 7000 series aluminium alloys, for example), would open up a whole host of novel technologies, using both existing and advanced materials in new ways
2) High temperature brazing uses additions such as boron or silicon to suppress the BFM melting point. They do this well, but also introduce brittle intermetallic phases in the joint region, limiting mechanical performance.
3) In practice, the parameters for brazing are determined on an application-specific basis, by experimental trial and error. Greater fundamental understanding of the brazing process will render this more efficient, permitting the brazing conditions to be designed.
This project builds the understanding to address such challenges.
A new type of alloy, High Entropy Alloys (HEAs) has recently come to the fore for alloy design. In these alloys, similar amounts of many elements are combined, rather than the typical approach of main solvent element with small additions of other elements to adjust the properties. Some HEAs have reported properties desirable for BFMs; e.g. the ability to add large amounts of elements to control melting point or wetting and flow behaviour without inducing brittle phases, and the multicomponent nature could mediate the transition in a joint between dissimilar materials. However, the physical metallurgy of HEAs is still relatively poorly understood, and their use in brazing has only been explored to a very limited extent.
In this work we are investigating systematically the design, understanding and use of HEAs as BFMs. This both adds to our fundamental understanding of this intriguing new class of alloys, and provides the knowledge and skills to permit the design of new products for industry. The data and computer models of the brazing process we will generate give the design methods and data for the development of brazing parameters, which is currently done on a case-by-case basis.
The project brings together the UK academic and industrial community on brazing for the first time, and will act as a focus for brazing interest. Aided by our industrial partners we will demonstrate the outcome of this work by two example case studies of alloy development:
I) Reduced cost BFM for aero engines; current alloys contain significant amounts of Au and so a noble metal-free BFM, with appropriate performance, would reduce costs.
II) Fusion BFM; to build advanced fusion reactor designs, it is necessary to join tungsten blocks on the reactor interior to copper pipes for coolant. This is currently done with BFMs with melting points <325degC; this limits operating temperatures. A new BFM would improve the performance and give more design flexibility for fusion reactor components.
Brazing is a key technology for many advanced applications, including the aerospace and nuclear sectors, but it has limitations. As the service requirements become more demanding, and base metals are refined, new BFMs must be developed. Some specific problems facing brazing technology today include:
1) Widening the spectrum of materials that can be joined (including higher temperature materials, bonding metals to ceramics, and also lower process temperatures for materials that cannot survive those of existing brazing alloys; functional ceramics and high strength 7000 series aluminium alloys, for example), would open up a whole host of novel technologies, using both existing and advanced materials in new ways
2) High temperature brazing uses additions such as boron or silicon to suppress the BFM melting point. They do this well, but also introduce brittle intermetallic phases in the joint region, limiting mechanical performance.
3) In practice, the parameters for brazing are determined on an application-specific basis, by experimental trial and error. Greater fundamental understanding of the brazing process will render this more efficient, permitting the brazing conditions to be designed.
This project builds the understanding to address such challenges.
A new type of alloy, High Entropy Alloys (HEAs) has recently come to the fore for alloy design. In these alloys, similar amounts of many elements are combined, rather than the typical approach of main solvent element with small additions of other elements to adjust the properties. Some HEAs have reported properties desirable for BFMs; e.g. the ability to add large amounts of elements to control melting point or wetting and flow behaviour without inducing brittle phases, and the multicomponent nature could mediate the transition in a joint between dissimilar materials. However, the physical metallurgy of HEAs is still relatively poorly understood, and their use in brazing has only been explored to a very limited extent.
In this work we are investigating systematically the design, understanding and use of HEAs as BFMs. This both adds to our fundamental understanding of this intriguing new class of alloys, and provides the knowledge and skills to permit the design of new products for industry. The data and computer models of the brazing process we will generate give the design methods and data for the development of brazing parameters, which is currently done on a case-by-case basis.
The project brings together the UK academic and industrial community on brazing for the first time, and will act as a focus for brazing interest. Aided by our industrial partners we will demonstrate the outcome of this work by two example case studies of alloy development:
I) Reduced cost BFM for aero engines; current alloys contain significant amounts of Au and so a noble metal-free BFM, with appropriate performance, would reduce costs.
II) Fusion BFM; to build advanced fusion reactor designs, it is necessary to join tungsten blocks on the reactor interior to copper pipes for coolant. This is currently done with BFMs with melting points <325degC; this limits operating temperatures. A new BFM would improve the performance and give more design flexibility for fusion reactor components.
Planned Impact
The academic impact of the work, described in the academic beneficiaries section will be communicated through attendance at conferences related to joining and metallurgy, and through academic publication. The further research and alloy development projects arising from this work will include additional research partners, and seek funding from the EPSRC and Innovate UK for fundamental and development studies respectively. We will also add value through interaction with other major research and training investments of the EPSRC, such as the Future Manufacturing Hub in Manufacture using Advanced Powder Processes (MAPP, https://mapp.ac.uk/), and (subject to the current renewal process of specific centres), through sponsored PhD studentships through Centres for Doctoral Training, including the CDT in Innovative Metal Processing (IMPaCT) (for which Co-I Hong is the scientific director) and the CDT in Advanced Metallic Systems (in which PI Goodall is a named academic) (see AWE Letter of Support for an example of how this would work).
The nature of the research addressed is such that it will enable significant and rapid industrial advancement. Core questions of the viability of HEAs as BFMs, and the effective strategies for their design and implementation will validate the use of these materials and provide a route for them to be developed for many different brazing situations. These results will be visible immediately to the industrial partners forming the Industrial Steering Committee (ISC, see letters of support), and clear evidence of how the fundamental understanding gained can be used to provide new BFMs will be demonstrated by the two industrially focussed case studies of alloy development.
Core partners, and the wider brazing community, will be engaged in the final workshop to highlight key results. The project will reach out to other interested parties through the contacts and networks of the project team and ISC members, and the wider network of collaborations within both the universities and the membership base of TWI. For example, Goodall has identified brazing challenges in other industrial areas, with ElementSix (brazing of diamond to metal) and Meggitt (brazing of aluminium for heat exchanger manufacture); these partners have not been included in the current proposal as the intention is to focus the applied work on just two case studies, but the validated approach could be applied to solve issues in brazing in these materials as well. Staff time (business development manager at UoS) is requested to ensure good engagement with this workshop.
The application of the technology will introduce economic benefits for those industries and wider benefits to society from the enhanced products and processes that become available. Additional benefits will arise for individuals; the project will see three early-career researchers carry out focussed research in the area, contributing to their development and shaping their future research or industrial careers, and providing future skilled workforce in this area. The wider public outreach involvement of the team will also be enhanced by activities developed in this work.
The project also forms a UK community focussed on brazing, bringing together industrial suppliers and users, as well as academics working in this area. This forum will generate many further opportunities for collaborative work, improving the UK position in this technology.
The nature of the research addressed is such that it will enable significant and rapid industrial advancement. Core questions of the viability of HEAs as BFMs, and the effective strategies for their design and implementation will validate the use of these materials and provide a route for them to be developed for many different brazing situations. These results will be visible immediately to the industrial partners forming the Industrial Steering Committee (ISC, see letters of support), and clear evidence of how the fundamental understanding gained can be used to provide new BFMs will be demonstrated by the two industrially focussed case studies of alloy development.
Core partners, and the wider brazing community, will be engaged in the final workshop to highlight key results. The project will reach out to other interested parties through the contacts and networks of the project team and ISC members, and the wider network of collaborations within both the universities and the membership base of TWI. For example, Goodall has identified brazing challenges in other industrial areas, with ElementSix (brazing of diamond to metal) and Meggitt (brazing of aluminium for heat exchanger manufacture); these partners have not been included in the current proposal as the intention is to focus the applied work on just two case studies, but the validated approach could be applied to solve issues in brazing in these materials as well. Staff time (business development manager at UoS) is requested to ensure good engagement with this workshop.
The application of the technology will introduce economic benefits for those industries and wider benefits to society from the enhanced products and processes that become available. Additional benefits will arise for individuals; the project will see three early-career researchers carry out focussed research in the area, contributing to their development and shaping their future research or industrial careers, and providing future skilled workforce in this area. The wider public outreach involvement of the team will also be enhanced by activities developed in this work.
The project also forms a UK community focussed on brazing, bringing together industrial suppliers and users, as well as academics working in this area. This forum will generate many further opportunities for collaborative work, improving the UK position in this technology.
Publications
Strickland J
(2021)
On the origin of mosaicity in directionally solidified Ni-base superalloys
in Acta Materialia
Lv J
(2022)
Microstructure evolution and interfacial bonding mechanisms of ultrasonically soldered sapphire/Al dissimilar joints using Sn-based solders
in Ceramics International
Luo D
(2021)
High Entropy Alloys as Filler Metals for Joining.
in Entropy (Basel, Switzerland)
Xiong C
(2022)
Microstructure transformation and mechanical properties of Al alloy joints soldered with Ni-Cu foam/Sn-3.0Ag-0.5Cu (SAC305) composite solder
in Journal of Alloys and Compounds
Way M
(2021)
A new high entropy alloy brazing filler metal design for joining skutterudite thermoelectrics to copper
in Journal of Alloys and Compounds
He H
(2020)
Diffusion reaction-induced microstructure and strength evolution of Cu joints bonded with Sn-based solder containing Ni-foam
in Materials Letters
Hardwick L
(2023)
Design of higher temperature copper brazing filler metals with reduced brittle phase content
in Materials Today Communications
Hardwick L
(2021)
Development of a Novel Ni-Based Multi-principal Element Alloy Filler Metal, Using an Alternative Melting Point Depressant
in Metallurgical and Materials Transactions A
Strickland J
(2021)
On the Origin of Mosaicity in Directionally Solidified Ni-Base Superalloys
in SSRN Electronic Journal
Description | Designs, and laboratory scale experimental validation of new alloys for filler metals have been completed and >10 new such alloys have been examined. An extensive literature review highlighted that few systematic studies have been published on brazing of alloy 718. The brazing temperature for different classes of braze fillers (existing and novel) has been optimised. It was demonstrated that gap size and braze filler chemistry play a crucial role in the formation of intermetallics and in the solidification behaviour of the braze joint. Some of the new HEA braze fillers have shown good wettability and their brazing behaviour is currently under investigation in systematic trials at larger scale. |
Exploitation Route | The main immediate use will be for further testing and development within other workpackages of this project as planned, however the publications arising give details of the alloy design approach, which will be of interest for wider alloy design studies. The outcomes of the further work will be of direct use to industry in understanding and evaluating these materials. |
Sectors | Aerospace Defence and Marine Energy |
Description | The findings from this work have been directly communicated to brazing and joining experts within a range of industrial companies (through the ISC, TWI membership and publications arising from the work). These data are allowing the evaluation of HEAs as brazing filler metals in a systematic and detailed way, indicating what the true potential of this material innovation is, and where it could best be applied. |
First Year Of Impact | 2021 |
Sector | Aerospace, Defence and Marine,Energy,Transport |
Impact Types | Economic |
Description | R Goodall membership of EPSRC Advanced Materials Advisory Group |
Geographic Reach | National |
Policy Influence Type | Participation in a guidance/advisory committee |
Description | Alloy Development and Advanced Mechanical Evaluation and Experimentation: (ADAM&EVE Partnership) |
Amount | £22,293 (GBP) |
Funding ID | BB/X005046/1 |
Organisation | Biotechnology and Biological Sciences Research Council (BBSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2022 |
End | 09/2023 |
Description | Novel Active Soldering; Creating Enhanced joints Near-ambient Temperature (NASCENT) |
Amount | £212,483 (GBP) |
Funding ID | EP/V050788/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 07/2021 |
End | 05/2024 |
Title | Simulation of brazing |
Description | We have created new, efficient and accurate models to simulate the thermal profile evolution and elemental diffusion during brazing |
Type Of Material | Computer model/algorithm |
Year Produced | 2020 |
Provided To Others? | No |
Impact | Currently the imapact is within the project, as it is used to better understand the alloys we have created and inform design |
Description | Collaboration with EPFL on mechanical testing |
Organisation | Swiss Federal Institute of Technology in Lausanne (EPFL) |
Country | Switzerland |
Sector | Public |
PI Contribution | My team devised a series of experiments and created the experimental samples for testing |
Collaborator Contribution | The EPFL team collaborated in the design and manufacture of a bespoke test rig for the samples, and made available equipment to test these at a range of different temperatures |
Impact | New test method, dataset, publications in prepartion |
Start Year | 2023 |
Description | Involvement of Dr Chinnapat Panwisawas |
Organisation | University of Leicester |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | EPSRC UKRI Innovation Fellow Dr Chinnapat Panwisawas (EP/S000828/2) has become involved in the work at Leicester, inputting to the modelling. |
Collaborator Contribution | Dr Panwisawas has brought specialist experience in modelling dynamic situations, such as additive manufacture, to the brazing modelling. |
Impact | Outputs are still internal to the project, improving the modelling techniques and developing them further. |
Start Year | 2020 |
Description | DLS News bulletin |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | TWI News bulletin on the experimental work on brazing conducted at DLS |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.twi-global.com/media-and-events/press-releases/2023/twi-assisting-in-the-development-of-... |
Description | IIW meeting |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | We arranged to host the 9th Intermediate Meeting of the International Institute of Welding's Commission XVII - Brazing, Diffusion bonding & Soldering at TWI Cambridge in April 2023. This international forum, attended by experts from around the globe, heard a series of presentations about our work, and by other experts, and then engaged in discussions about the impact of these findings on their areas of interest. |
Year(s) Of Engagement Activity | 2023 |
Description | LOT Linkedin post |
Form Of Engagement Activity | Engagement focused website, blog or social media channel |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | TWI posted to their Linkedin channel about conference attendance |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.twi-global.com/media-and-events/press-releases/2022/twi-to-deliver-four-presentations-at... |
Description | Talk to Nuclear AMRC Research board |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Presentation to the Nuclear AMRC research board on High Entropy Alloys and opportunities for working with these materials in the nuclear sector |
Year(s) Of Engagement Activity | 2020 |