Performance-driven design of aluminium alloys for additive manufacturing (PAAM)
Lead Research Organisation:
University College London
Department Name: Mechanical Engineering
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Publications
Bhatt A
(2023)
In situ characterisation of surface roughness and its amplification during multilayer single-track laser powder bed fusion additive manufacturing
in Additive Manufacturing
Chen R
(2024)
Exploring the Properties of Disordered Rocksalt Battery Cathode Materials by Advanced Characterization
in Advanced Functional Materials
Fan X
(2023)
Thermoelectric magnetohydrodynamic control of melt pool flow during laser directed energy deposition additive manufacturing
in Additive Manufacturing
Guo L
(2023)
Quantifying the effects of gap on the molten pool and porosity formation in laser butt welding
in International Journal of Heat and Mass Transfer
Leung C
(2023)
Correlative full field X-ray compton scattering imaging and X-ray computed tomography for in situ observation of Li ion batteries
in Materials Today Energy
Leung CLA
(2024)
Mapping of lithium ion concentrations in 3D structures through development of in situ correlative imaging of X-ray Compton scattering-computed tomography.
in Journal of synchrotron radiation
Ma S
(2023)
Additive manufacturing enabled synergetic strengthening of bimodal reinforcing particles for aluminum matrix composites
in Additive Manufacturing
Mu J
(2023)
Application of electrochemical polishing in surface treatment of additively manufactured structures: A review
in Progress in Materials Science
Priyadarshi A
(2023)
Effect of water temperature and induced acoustic pressure on cavitation erosion behaviour of aluminium alloys
in Tribology International
Wang A
(2023)
Blue laser directed energy deposition of aluminum with synchronously enhanced efficiency and quality
in Additive Manufacturing Letters
| Description | UCL and Anna Paradowska, University of Sydney/ANSTO collaboration |
| Organisation | Australian Nuclear Science and Technology Organisation |
| Country | Australia |
| Sector | Public |
| PI Contribution | Joint project - Solid-State Additive Manufacturing For Recycled Aluminium Alloys |
| Collaborator Contribution | Joint project - Solid-State Additive Manufacturing For Recycled Aluminium Alloys |
| Impact | Paper submitted |
| Start Year | 2023 |
| Description | UCL and Michael Mallon, Gian Lorenzo Casini and Miguel Yagues Palazon from European Space Agency collaboration |
| Organisation | European Space Agency |
| Department | Harwell Centre |
| Country | United Kingdom |
| Sector | Public |
| PI Contribution | Joint project - Enable active control of surface roughness during advanced manufacturing using laser pulse shaping technologies |
| Collaborator Contribution | Joint project - Enable active control of surface roughness during advanced manufacturing using laser pulse shaping technologies |
| Impact | Joint PDRA Anastassia Milleret hired. |
| Start Year | 2024 |
| Description | UCL and Wentao Yan, National University of Singapore collaboration |
| Organisation | National University of Singapore |
| Country | Singapore |
| Sector | Academic/University |
| PI Contribution | Provide expertise on AM experiment and data analytics. |
| Collaborator Contribution | Provide expertise on AM modelling. |
| Impact | No output yet. |
| Start Year | 2023 |
| Description | UCL and Xiao Shang, University of Toronto collaboration |
| Organisation | University of Toronto |
| Country | Canada |
| Sector | Academic/University |
| PI Contribution | Provision of beamtime experiment, expertise in AM machines, data analysis. |
| Collaborator Contribution | Participation in beamtime experiment, expertise in data analysis and AM |
| Impact | No output yet. |
| Start Year | 2023 |
| Description | CLA Leung talk at AMRC |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | C L A Leung talk at AMRC (University of Sheffield Advanced Manufacturing Research Centre) "Progress towards intelligent manufacturing", UK |
| Year(s) Of Engagement Activity | 2023 |
| Description | CLA Leung talk at Centre for Artificial Intelligence and Robotics (CAIR) Hong Kong Institute of Science & Innovation |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | C L A Leung talk at Centre for Artificial Intelligence and Robotics (CAIR) Hong Kong Institute of Science & Innovation (Chinese Academy of Sciences), Hong Kong |
| Year(s) Of Engagement Activity | 2023 |
| Description | K Zhang talk at FEMS EUROMAT 2023 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | K Zhang talk at FEMS EUROMAT 2023, "Pore evolution during directed energy deposition additive manufacturing", Frankfurt Germany |
| Year(s) Of Engagement Activity | 2023 |
| Description | PD Lee attended ESA/ESTEEC Meeting |
| Form Of Engagement Activity | A formal working group, expert panel or dialogue |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | PDL attended ESA/ESTEEC Meeting - Physical Sciences Working Group, The Netherlands |
| Year(s) Of Engagement Activity | 2023 |