SAMULET Project 5: Processing Advanced Materials (Resubmission)
Lead Research Organisation:
University of Strathclyde
Department Name: Design Manufacture and Engineering Man
Abstract
See lead application (ref H765509)
Publications
Wood P.
(2011)
Predicting grain structure and defect locations in a cast nickel and chromium alloy tool for superplastic forming by casting simulation
in 8th European Conference on Superplastic Forming, EuroSPF2011
Wood P
(2014)
Numerical study on the effect of the thermo-mechanical properties of alloys on the behaviour of super plastic forming tools Numerische Studie des Einflusses der thermomechanischen Eigenschaften von Legierungen auf das Verhalten superplastisch umgeformter Werkzeuge
in Materialwissenschaft und Werkstofftechnik
Jerzy Dziewierz (Author)
(2012)
An application-specific design approach for 2D ultrasonic arrays
Dziewierz J
(2013)
Computationally efficient solution of Snell's law of refraction.
in IEEE transactions on ultrasonics, ferroelectrics, and frequency control
Anthony Gachagan (Author)
(2012)
Enhancing 2D phased array sensitivity and bandwidth using in probe electronics
Anthony Gachagan (Author)
(2013)
2D ultrasonic array transducer design to maximise coverage in composite material structures
Andrzej Rosochowski (Author)
(2011)
SAMULET 5.1.7 SPF tooling development; WP4 D4.2 SPF process simulation
Andrzej Rosochowski (Author)
(2013)
SAMULET 5.1.7 SPF tooling development; WP8 D8.4 Modelling user guidelines
Andrzej Rosochowski (Author)
(2012)
SAMULET 5.1.7 SPF tooling development; WP4 D4.5 identification of properties for the thermo-mechanical tool model
Andrzej Rosochowski (Author)
(2012)
SAMULET 5.1.7 SPF tooling development; WP4 D4.4 thermo-mechanical modelling of SPF tools
| Description | The project analysed different aspects of tooling and material flow in superplastic forming of titanium alloy Ti-6Al-4V. The tool analysis used finite element modelling of stress changes caused by varying mechanical and thermal loads. Another aspect of the project was material related and encompassed FE simulation of SPF processes and die-material interaction due to die corrosion and lubrication. The research findings helped identify the most promising tool materials and provided recommendation for SPF parameters. |
| Exploitation Route | Companies involved in superplastic forming of aerospace components made of Ti-6Al-4V can benefit from in depth analysis of tooling and the process. |
| Sectors | Aerospace, Defence and Marine |
| Description | Joint research with LOUGHBOROUGH UNIVERSITY |
| Organisation | Loughborough University |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | University of Strathclyde researchers worked on this project with researchers from LOUGHBOROUGH UNIVERSITY |
| Start Year | 2009 |
| Description | Joint research with SHEFFIELD UNIVERSITY |
| Organisation | University of Sheffield |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | University of Strathclyde researchers worked on this project with researchers from SHEFFIELD UNIVERSITY |
| Start Year | 2009 |
| Description | Joint research with University of Birmingham |
| Organisation | University of Birmingham |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | University of Strathclyde researchers worked on this project with researchers from University of Birmingham |
| Start Year | 2009 |
| Description | Joint research with University of Southampton |
| Organisation | University of Southampton |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | University of Strathclyde researchers worked on this project with researchers from University of Southampton |
| Start Year | 2009 |