Phase Change Materials based Tunable NEMS

Lead Research Organisation: University of Exeter
Department Name: Engineering Computer Science and Maths

Abstract

Tunable resonators have wide ranging applications such as in positioning systems (eg. portable GPS) and in many satellite systems, as well as in almost all wireless devices such as the mobile phone. Better the resonator, more favorable it is for the application in terms of speed, as well as signal quality. MEMS and NEMS have potential for very high quality factors, which can be taken advantage of for designing such resonators. One of the important characteristics of a resonator is its ability to adjust its frequency quickly, so that it can lock in to a signal speedily. In this project we propose a novel NEMS resonator whose frequency can be tuned rapidly (on the order of a few nanoseconds). In addition, this resonator would use materials that have potentially dual-functionality, to help not only in tuning the frequency, but also in sensing the frequency. Such a resonator would reduce costs, take up very much less space than existing resonators, and would be much simpler to fabricate. Furthermore, this research project would shed light on physical mechanisms such as the piezoresistivity of phase change materials, as well as the mechanical properties of such materials.

Planned Impact

The research performed during the course of this project will be widely disseminated in prestigious conferences such as the IEEE MEMS conference or the Micro-and NanoEngineering Conference (MNE) and Materials Research Society's (MRS) March Meeting. These conferences provide an effective medium for researchers in the industry and academia to benefit from the results derived during our research. Furthermore, results of this work will be published in peer-reviewed journals such as IEEE Transactions on Nanotechnology, Nanotechnology and Applied Physics Letters.
The research will be carried out in close collaboration with a UK-based SME (Small and Medium Enterprise) company involved in Phase Change materials, Plarion Ltd. Thus, promising developments during the project can be evaluated further by Plarion who are highly skilled in product commercialization. The Principal Investigator has previously been actively involved in much international collaboration, and has facilitated the commercialization of developed technology to an external company. He holds seven patent/ patent applications in both the EU and the US and has good connections with many industrial companies such as IBM, Plarion, Nanosensors, Asylum Research and the Swiss Microelectronics Center (CSEM). Thus any new result will be effectively communicated through this network in order to assess potential for commercialization. In addition, any patents arising out this project will be effectively managed via the University's Intellectual Property Team, and marketed to relevant companies interested in commercialization.
The work will result in helping train a postdoctoral researcher in the field. They will in-turn benefit the UK economy by entering the workforce with skills in two emerging Science and Technology fields - NEMS and Phase Change Memories. As we enter the realm of a global society, no one country can claim monopoly on knowledge as most large enterprises have a global presence. The presence of qualified people in the UK would thus benefit the UK by encouraging more companies to set up their facilities here. This would not only increase jobs in one sector, but also contribute to employment in the entire range of support and administrative staff that such a facility would need. Thus, there are potentially large benefits to helping educate and train people in high-technology fields. In addition, these technologies have the potential to impact society directly, with superior guidance systems resulting in faster positioning, better communication channels as well as aid in the research and study of new material systems that can impact society in positive ways.

Thus, the pathways to impact can be summarized as:
-Publications in high quality journals of international readership, and presentations in prestigious international conferences
-Training of a postdoctoral research associate in two emerging fields of high value - phase change materials and nanoelectromechanical systems. Furthermore, the postdoctoral research associate will attend public communications training in order to help her/him become an effective public speaker, fully capable of publicizing the research.
-Close collaboration and development of the device with an UK-based SME, Plarion Ltd., which could lead to commercial exploitation of the technology developed in this project
 
Description We found that in order to create tunable NEMS using phase change materials, we must use 2D materials as electrodes. This study was published in the journal IEEE Access and is part of a Patent Application.

This grant was awarded to develop fundamental concepts of employing a class of materials termed phase change materials in nanoelectromechanical systems to enable fine tuning for RF applications. Our key findings were:
1) The total tuning possible using simple cantilever beam structures was very low, typically under 1%
2) It is very difficult to "switch" these materials electrically for laterally connected materials
3) New designs employing graphene provide the best possibility, but this requires a lot of experimental development in future.
4) We have developed the world's first piezoresistive sensing of graphene to go one part into achieving the goals of this project.
5) We have come up with a plausible design for being able to tune phase change materials with graphene electrodes.
Exploitation Route Please see EP/J00541X/2 - already entered once.
Sectors Digital/Communication/Information Technologies (including Software),Electronics,Manufacturing, including Industrial Biotechology

URL http://nanoeng.materials.ox.ac.uk/Advanced_Nanoscale_Engineering_at_Oxford/Home.html
 
Description It will be clear over a few years what impact it will have that we have developed the world's first piezoresistive sensing of graphene and published our design how to tune phase change materials with graphene electrodes. One PDRA employed on this grant obtained a position at a UK-based firm.
First Year Of Impact 2016
Sector Aerospace, Defence and Marine,Digital/Communication/Information Technologies (including Software),Electronics,Manufacturing, including Industrial Biotechology
Impact Types Economic

 
Description Designing Nanosystems: the CMOS Way; Standard Research - NR1
Amount £298,001 (GBP)
Funding ID EP/N010159/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 01/2016 
End 11/2017
 
Description ICT31: Fun-Comp
Amount £3,996,951 (GBP)
Funding ID 780848 
Organisation European Commission 
Sector Public
Country European Union (EU)
Start 03/2018 
End 02/2022
 
Description Invited Renewal - EPSRC Manufacturing Fellowship
Amount £1,116,378 (GBP)
Funding ID EP/R001677/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 01/2019 
End 01/2022
 
Description Next Generation Chalcogenides (ChAMP); MaFuMa grant
Amount £2,508,176 (GBP)
Funding ID EP/M015130/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 02/2015 
End 01/2020
 
Description Wearable and Flexible Technologies (WAFT); MaFuMa grant
Amount £2,476,881 (GBP)
Funding ID EP/M015173/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 05/2015 
End 04/2020
 
Title High current conductive AFM 
Description Our set-up on an Asylum MFP 3D atomic force microscope allows us to induce up to 1 mA of current through a conductive AFM tip. This allows us to probe the nanoscale electrical properties of functional materials at current densities commonly used in real world devices, helping accelerate real-world usability of such materials in devices that have dimensions of devices, eliminating the need for lithographic patterning in order to screen novel materials. We have successfully used this to characterize phase change materials, and more recently are adapting this for 2D materials. 
Type Of Material Improvements to research infrastructure 
Year Produced 2017 
Provided To Others? Yes  
Impact A spin out company Bodle. Several papers and patents resulting from the development of this technique. 
 
Title Optoelectronic testing station - Fiber Coupling with nanometer precision 
Description Set-ups used for combined optoelectronic testing of nanoscale and microscope devices have several limitations with respect to mechanical, electrical and optical operation properties. Therefore, in order to continue with the study of mixed mode electro-optical operation of functional materials, a new experimental set-up with better characteristics was required. The following features were identified. In order to aim the laser accurately on the device, a raster reflectivity scan was necessary. This, in turn, called for the improvement in reproducibility of the stage position, as well as a reduction of the drift due to thermal expansion and mechanical relaxation of the components. Additionally, by reducing mechanical drift, the time available to perform the test would also increase, allowing for better focusing and aiming into the area of interest. Improvement in the scan step resolution was also required, in comparison to the 100nm step resolution provided by the pico-motors of the former setup. Also, nano-second range optical and electrical pulses were needed to induce amorphization of GST devices. All of the before mentioned requirements were subsequently incorporated into a new experimental setup in a way which is described in detail in a thesis submitted by Gerardo Rodriguez Henandez whilst working in Harish Bhaskaran's laboratory. The requirements for the optical component of the experimental setup corresponded closely to a laser-scanning microscope. Such an instrument produces images by raster scanning a focused laser beam on a given sample and acquiring the intensity of the reflected signal at every point during the scan. However, higher power than that required to simply acquire reflectance scans (3mW) was also needed to optically induce phase changes of phase change materials (~60mW). One important feature in the current design was the use of fibre-coupled optical components. Such components allow a reduction of the setup footprint, simplify the alignment and improve the sensitivity to vibration and are generally safer to use. 
Type Of Material Improvements to research infrastructure 
Year Produced 2017 
Provided To Others? Yes  
Impact A paper and a research thesis was published. 2 new patents have been filed. 
 
Description Invited Manufacturing Fellowship Extension 
Organisation IBM
Department IBM Research Zurich
Country Switzerland 
Sector Private 
PI Contribution industrial collaboration
Collaborator Contribution industrial advice
Impact N/A
Start Year 2018
 
Description WAFT Industrial Partners 
Organisation BASF
Country Germany 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Bodle Technologies Ltd
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Centre for Process Innovation (CPI)
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation CreaPhys GmbH
Country Germany 
Sector Academic/University 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Defence Science & Technology Laboratory (DSTL)
Country United Kingdom 
Sector Public 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Eckersley O'Callaghan
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Fraunhofer Society
Country Germany 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Heliatek GmbH
Country Germany 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation IBM
Department IBM Research Zurich
Country Switzerland 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Kurt J Lesker Company
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Msolv Ltd
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Oxford Instruments
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Oxford Instruments Asylum Research
Country United States 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Oxford Photovoltaics
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Oxford Photovoltaics
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Plasma App Ltd
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Pragmatic Printing Ltd
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation SONY
Country Japan 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Sharp Laboratories of Europe Ltd
Country United Kingdom 
Sector Private 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation Swiss Center for Electronics and Microtechnology
Country Switzerland 
Sector Charity/Non Profit 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation University of Münster
Country Germany 
Sector Academic/University 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Description WAFT Industrial Partners 
Organisation University of Pennsylvania
Country United States 
Sector Academic/University 
PI Contribution The WAFT Research Team works in four research strands contributing to experimental research in metrology for process control and waste reduction, developing the flexible and functional components integration, focusing on modelling and reliability and scale-up via Roll-to-Roll process development.
Collaborator Contribution The WAFT IAB's purpose is to strengthen the WAFT research project by advising, assisting, supporting and advocating on the formulation of goals, objectives, priorities and plans for this exploratory programme and research. The WAFT IAB has no legislative, administrative or programmatic authority and is advisory only. Members are volunteers who share expert knowledge of the research or product development tasks and competency requirements for specific research outputs. The role of the Industry Advisory Board is to facilitate the exchange of ideas between the board members, the academic staff and the students in the WAFT Project. The WAFT IAB members bring a wide range of backgrounds and real-world experience to the table; these can be applied to situations faced by the team. The IAB members can also act as mentors to students in specific areas. In addition to their expertise and advice, IAB members can provide a wealth of other resources such as networking contacts, sponsorship, employment/volunteer experiences, access to facilities or equipment to name a few.
Impact Industrial Advisory Board Meeting with Science Meeting was held in October 2015 with 33 delegates. The WAFT Scientific Meeting was held in October 2016 with 55 delegates from the academic and industrial partners. The number of industrial partner companies increased from 8 to 17 over a year, and 15 industrial partner representatives attended the WAFT Industrial Advisory Board Meeting on 21 October 2016. The number of industrial partner increased to 20 in 2017. The WAFT Annual Meeting showcased 10 academic talks and 3 presentations from Industrial Partners: BASF, Oxford Instruments (Asylum Research), Fraunhofer FEPP and closed with a poster session.
Start Year 2015
 
Title H Bhaskaran 1321429.1 
Description Patent Application Status: File. Type: Priority. Application Date: 4 Dec 2013. 
IP Reference GB1321429.1 
Protection Patent application published
Year Protection Granted 2013
Licensed No
Impact No impact yet.
 
Title H Bhaskaran 1322912.5 
Description Patent Application Status: File. Type: Priority. Application Date: 23 Dec 2013. 
IP Reference GB1322912.5 
Protection Patent application published
Year Protection Granted 2013
Licensed No
Impact No impact yet.
 
Title H Bhaskaran 1322917.4 
Description Patent Application Status: File. Type: Priority. Application Date: 23 Dec 2013. 
IP Reference GB1322917.4 
Protection Patent application published
Year Protection Granted 2013
Licensed No
Impact No impact yet.
 
Title H Bhaskaran 1417974.1 
Description Patent Application Status: File. Type: Priority. Application Date: 10 Oct 2014. 
IP Reference GB1417974.1 
Protection Patent application published
Year Protection Granted 2014
Licensed No
Impact No impact yet.
 
Title H Bhaskaran 1417976.6 
Description Patent Application Status: File. Type: Priority. Application Date: 10 Oct 2014 
IP Reference GB1417976.6 
Protection Patent application published
Year Protection Granted 2014
Licensed No
Impact No impact yet.
 
Title H Bhaskaran 1509992.2 
Description Patent Application Status: File, Type: Priority. Application Date: 9 June 2015. 
IP Reference GB1509992.2 
Protection Patent application published
Year Protection Granted 2015
Licensed No
Impact No impact yet.
 
Title H Bhaskaran 1512914.1 
Description Patent Application Status: File, Type: Priority. Application Date: 22 July 2015. 
IP Reference GB1512914.1 
Protection Patent application published
Year Protection Granted 2015
Licensed No
Impact No impact yet.
 
Title H Bhaskaran 1516579.8 
Description Patent Application Status: File, Type: Priority. Application Date: 18 Sept 2015 
IP Reference GB1516579.8 
Protection Patent application published
Year Protection Granted 2015
Licensed No
Impact No impact yet.
 
Title H Bhaskaran 1518371.8 
Description Patent Application Status: File, Type: Priority. Application Date: 16 Oct 2015. 
IP Reference GB1518371.8 
Protection Patent application published
Year Protection Granted 2015
Licensed No
Impact No impact yet.
 
Company Name Bodle Technologies Limited 
Description Bodle develops and commercialises a new class of active smart glazing products and displays. 
Year Established 2015 
Impact Bodle's core technology is about the creation and manipulation of colour that is reflected off a surface by changing the refractive index of ultra-thin functional layers. The technology is completely revolutionary, as it can achieve all of the following: • Extremely high resolution, with pixel sizes of sub-100 nm already demonstrated (compared to several micrometers for the best current technology). • Capable of very deep colour hues matching and even exceeding the range of colours possible by the latest technologies in displays • Can be clearly viewed in bright lighting conditions • Eye fatigue minimal as displays similar to paper • Very low power similar to electrochromic displays • Extremely high speed switching capable of video rendition in reflective mode, and even holographic displays possible as switching speeds are much lower than microseconds.
Website http://www.bodletechnologies.com