Glasgow Precision Diagnostics and Therapeutics

Lead Research Organisation: University of Glasgow
Department Name: UNLISTED

Abstract

Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.

Technical Summary

The Confidence in Concept scheme is a key part of MRC’s translational research strategy and provides annual awards to institutions, to be used flexibly to support the earliest stages of multiple translational research projects. The award can be used by the institution to support a number of preliminary-stage translational projects. The projects supported should aim to provide sufficient preliminary data to establish the viability of an approach –– before seeking more substantive funding. It is intended to accelerate the transition from discovery research to translational development projects by supporting preliminary work or feasibility studies to establish the viability of an approach.

People

ORCID iD

Publications

10 25 50

publication icon
Hoare D (2019) The Future of Cardiovascular Stents: Bioresorbable and Integrated Biosensor Technology. in Advanced science (Weinheim, Baden-Wurttemberg, Germany)

 
Description Acrodysostosis Patient Support and Research group
Geographic Reach Local/Municipal/Regional 
Policy Influence Type Contribution to new or Improved professional practice
 
Description Engagement with FAO - Participating in a panel as expert on a Risk profile
Geographic Reach Multiple continents/international 
Policy Influence Type Implementation circular/rapid advice/letter to e.g. Ministry of Health
Impact In Singapore during 2015, Group B Streptococcus (GBS) sequence type 283 (ST283) caused the only reported foodborne outbreak of invasive GBS disease. Over 20 percent of cases were healthy adults without comorbidities, which is unusual for GBS. The outbreak was linked to the consumption of raw freshwater fish. Subsequent investigations found that ST283 GBS has been common among GBS causing disease in humans and in tilapia across Southeast Asia for at least 20 years, whereas it was almost non-existent outside this region. Given the novelty of the outbreak, this risk profile consolidates the current knowledge to identify data gaps about GBS ST283 along the freshwater fish supply chain in Southeast Asia. - 2021. Risk profile - Group B Streptococcus (GBS) - Streptococcus agalactiae sequence type (ST) 283 in freshwater fish. Bangkok.
URL https://www.fao.org/documents/card/en/c/cb5067en
 
Description DTP 2018-19 University of Glasgow
Amount £6,275,971 (GBP)
Funding ID EP/R513222/1 
Organisation Engineering and Physical Sciences Research Council (EPSRC) 
Sector Public
Country United Kingdom
Start 09/2018 
End 09/2023
 
Description Deciphering Gram-negative phage-inducible chromosomal island strategies for spreading in nature
Amount £710,774 (GBP)
Funding ID MR/S00940X/1 
Organisation Medical Research Council (MRC) 
Sector Public
Country United Kingdom
Start 06/2019 
End 05/2022
 
Description Developing Systems able to identify resistance to certain antibiotics and potential new prophylactic measures
Amount £3,000 (GBP)
Funding ID 12490/13212 
Organisation Daiwa Anglo-Japanese Foundation 
Sector Charity/Non Profit
Country United Kingdom
Start 06/2018 
End 05/2019
 
Description Early Stage Covid Pre Seed Grant
Amount £23,000 (GBP)
Organisation Scottish Enterprise 
Sector Public
Country United Kingdom
Start 10/2020 
 
Description Glasgow - Confidence in Concept 2019
Amount £582,660 (GBP)
Funding ID MC_PC_19039 
Organisation Medical Research Council (MRC) 
Sector Public
Country United Kingdom
Start 03/2020 
End 03/2023
 
Description Glasgow 2nd intake 2018 4-Year PhD Studentship (4th) Scheme: Mr Jack Beazer; Ms Emily Gallen; Mr Jithin Kuriakose; Ms Rebecca Rooney (4 years)
Amount £612,156 (GBP)
Funding ID FS/18/58/34179 
Organisation British Heart Foundation (BHF) 
Sector Charity/Non Profit
Country United Kingdom
Start 10/2018 
End 09/2022
 
Description Glasgow Knowledge Exchange (GKE) develop wireless antenna vascular graft
Amount £2,000 (GBP)
Organisation University of Glasgow 
Sector Academic/University
Country United Kingdom
Start  
 
Description Glasgow Knowledge Exchange Fund
Amount £2,000 (GBP)
Organisation University of Glasgow 
Sector Academic/University
Country United Kingdom
Start  
 
Description Helper and satellite pathogenicity islands: the discovery of two novel subcellular elements with a huge impact on bacterial pathogenesis and evolution
Amount £411,276 (GBP)
Funding ID BB/S003835/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 04/2019 
End 04/2022
 
Description How do REDOX regulators control Apicoplast functions in the parasites causing Toxoplasmosis and Malaria
Amount £333,615 (GBP)
Funding ID MR/S024573/1 
Organisation Medical Research Council (MRC) 
Sector Public
Country United Kingdom
Start 01/2019 
End 09/2022
 
Description ICURe
Amount £48,000 (GBP)
Organisation SETsquared Partnership 
Sector Charity/Non Profit
Country United Kingdom
Start 01/2018 
End 07/2018
 
Description John Mercer - VascuStent: Development of therapeutic telemetry
Amount £80,000 (GBP)
Organisation Philips Healthcare 
Sector Private
Country Netherlands
Start 08/2022 
 
Description MRC
Amount £0 (GBP)
Funding ID MR/V035401/1 
Organisation Medical Research Council (MRC) 
Sector Public
Country United Kingdom
Start  
 
Description Molecular and patho-physiological analysis of the G protein-coupled receptor GPR84
Amount £901,395 (GBP)
Funding ID BB/T000562/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 01/2020 
End 12/2023
 
Description New Generation of Nebulisers for Efficient Respiratory Drug Delivery
Amount £159,579 (GBP)
Funding ID 80831 
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 09/2020 
End 06/2021
 
Description New Generation of Nebulisers for Precision Respiratory Drug Delivery
Amount £812,899 (GBP)
Funding ID 10016661 
Organisation Innovate UK 
Sector Public
Country United Kingdom
Start 04/2022 
End 04/2024
 
Description Paper-based platform for onsite, rapid and multiplexed pathogen detection in shrimp farms
Amount £252,639 (GBP)
Funding ID BB/T012528/1 
Organisation Biotechnology and Biological Sciences Research Council (BBSRC) 
Sector Public
Country United Kingdom
Start 04/2020 
End 09/2021
 
Description RSE Unlocking Ambition Fellowship
Amount £45,000 (GBP)
Organisation Royal Society of Edinburgh (RSE) 
Sector Charity/Non Profit
Country United Kingdom
Start 06/2018 
End 06/2019
 
Description Rapid Onsite Tools to Combat Antimicrobial Resistant Mastitis in Dairy Cattle
Amount £141,747 (GBP)
Funding ID 623818418 
Organisation British Council 
Sector Charity/Non Profit
Country United Kingdom
Start 02/2021 
End 02/2023
 
Description SMART Feasibility award from Scottish Enterprise EN
Amount £85,000 (GBP)
Organisation Scottish Enterprise 
Sector Public
Country United Kingdom
Start 09/2021 
 
Description UofG Reinvigorating Research Award
Amount £40,000 (GBP)
Organisation University of Glasgow 
Sector Academic/University
Country United Kingdom
Start 12/2021 
 
Title Autophagy/ULK1 deficient cell line models 
Description We have generated autophagy/ULK1 deficient cell line models that are shared with the leukaemia/autophagy research community upon request. 
Type Of Material Cell line 
Year Produced 2019 
Provided To Others? Yes  
Impact Used further within leukaemia/autophagy research community. 
 
Title Novel knock-in transgenic mouse line expressing human GPR84 
Description Generated both a novel knock-in transgenic mouse line expressing human GPR84, in collaboration with the company 7TM antibodies. 
Type Of Material Cell line 
Year Produced 2021 
Provided To Others? Yes  
Impact Collaboration with company 7TM antibodies enabling further analysis. 
URL https://uk.7tmantibodies.com/
 
Title Phospho-site specific antisera against GPR84 
Description Generated a number of phospho-site specific antisera against GPR84 that are now available commercially. 
Type Of Material Antibody 
Year Produced 2021 
Provided To Others? Yes  
Impact Now commercially available through collaboration with company, 7TM antibodies. 
URL https://uk.7tmantibodies.com/7tm-phosphosite-specific-antibodies/free-fatty-acid-receptors/
 
Title AI algorithm for diagnosis cell populations - Vascular Graft 
Description Development of Artificial Intelligence (AI) algorithm for discerning different cell populations for diagnosis or cell killing. 
Type Of Material Data analysis technique 
Year Produced 2021 
Provided To Others? No  
Impact N/A 
 
Description Aptamer Group in-kind contribution 
Organisation Aptamer Group
Country United Kingdom 
Sector Private 
PI Contribution Image based screening of aptamer libraries for novel immunomodulators. Dr. James Brewer's team expanded analysis of enriched aptamer pool.
Collaborator Contribution Costs of aptamer synthesis and labelling have been subsidised by Aptamer Group as an in-kind contribution to the project.
Impact Aptamer analysis pool expanded, toll receptor test completed, formulation optimised.
Start Year 2019
 
Description Bacteriocins for microbiome engineering 
Organisation Enterobiotix
Country United Kingdom 
Sector Private 
PI Contribution Identification, production and characterisation of bacteriocins targeting vancomycin-resistant Enterococci.
Collaborator Contribution The project was 50% funded by our industrial partner EnteroBiotix, who provided £33,229 in cash.
Impact N/A
Start Year 2018
 
Description EnteroBiotix Collaboration - Dr. D. Walker protein antibiotics active against Vancomycin Resistant Enterococcus 
Organisation Enterobiotix
Country United Kingdom 
Sector Private 
PI Contribution Walkers team identifying, characterising and engineering of highly specific protein antibiotics active against Vancomycin Resistant Enterococcus (VRE)
Collaborator Contribution This project was 50% funded by our industrial partner EnteroBiotix, who provided £33,229 in cash. We have held monthly meetings with EnteroBiotix throughout the project.
Impact Candidates were identified and produced, in vitro activity and stability was successfully tested, leading to accelerated and long term stability testing of the compounds.
Start Year 2019
 
Description Enterobiotix 
Organisation Enterobiotix
Country United Kingdom 
Sector Private 
PI Contribution Testing the concept for development of new class of medicine
Collaborator Contribution development of the medicine
Impact Ongoing
Start Year 2018
 
Description Jichi Medical University 
Organisation Jichi Medical University
Country Japan 
Sector Academic/University 
PI Contribution Dr. Kiga Kotaro (Jichi Medical University) spent 2 moths at the University of Glasgow to collaborate on project entitled 'Development of a novel biotechnology-derived antimicrobial approach for therapy and diagnostics using synthetic Phage-Inducible Chromosomal Islands (PICIs).'
Collaborator Contribution Dr. Rodrigo Ibarra-Chavez (University of Glasgow) spent 1 month in Japan at Jichi Medical University.
Impact Two papers: 10.34133/2020/5783064 and 10.1038/s41467-020-16731-6. Awarded Daiwa Support Award for travel to Japan from the Daiwa Anglo-Japanese Foundation.
Start Year 2019
 
Description Medicines for Malaria Venture 
Organisation Medicines for Malaria Venture (MMV)
Country Switzerland 
Sector Charity/Non Profit 
PI Contribution Partnership to help seek and generate networking opportunities to gain investment and industry collaborations.
Collaborator Contribution Generation of networking opportunities
Impact Industry negotiations now underway with potential manufacturer.
Start Year 2019
 
Description Nebu-Flow Ltd industrial partnerships 
Organisation Aerogen
Country Ireland 
Sector Private 
PI Contribution A spin-out company from University of Glasgow, Nebu-Flow, was formed in March 2019 and has successfully engaged with leading companies in the field who evaluated the technology. This enabled the team to identify the shortcoming of current devices around limited acceptable formulations, including biologics, suspensions and surface-active molecules. They have shown that they can increase inhalable fraction to above 90% (up to 60% higher than current devices in the market).
Collaborator Contribution The industrial partnership was pursued during this project through industry engagements and validation of the technology with leading medical device companies including Pari GmbH and Aerogen Ltd. Both companies evaluated the technology and currently engaged in co-development agreement discussions.
Impact Technology evaluation and currently engagement in the co-development of a miniaturised platform.
Start Year 2020
 
Description Nebu-Flow Ltd industrial partnerships 
Organisation PARI GmbH
Country Germany 
Sector Private 
PI Contribution A spin-out company from University of Glasgow, Nebu-Flow, was formed in March 2019 and has successfully engaged with leading companies in the field who evaluated the technology. This enabled the team to identify the shortcoming of current devices around limited acceptable formulations, including biologics, suspensions and surface-active molecules. They have shown that they can increase inhalable fraction to above 90% (up to 60% higher than current devices in the market).
Collaborator Contribution The industrial partnership was pursued during this project through industry engagements and validation of the technology with leading medical device companies including Pari GmbH and Aerogen Ltd. Both companies evaluated the technology and currently engaged in co-development agreement discussions.
Impact Technology evaluation and currently engagement in the co-development of a miniaturised platform.
Start Year 2020
 
Description Novel Platform for Precision Pulmonary Delivery of High Value Therapeutics 
Organisation Aerogen
Country Ireland 
Sector Private 
PI Contribution Development of novel nebuliser technology
Collaborator Contribution Testing of proprietary formulation using nebuliser technology
Impact In development
Start Year 2019
 
Description Novel Platform for Precision Pulmonary Delivery of High Value Therapeutics 
Organisation Chiesi
Country Italy 
Sector Private 
PI Contribution Development of novel nebuliser technology
Collaborator Contribution Testing of proprietary formulation using nebuliser technology
Impact In development
Start Year 2019
 
Description Novel Platform for Precision Pulmonary Delivery of High Value Therapeutics 
Organisation PARI GmbH
Country Germany 
Sector Private 
PI Contribution Development of novel nebuliser technology
Collaborator Contribution Testing of proprietary formulation using nebuliser technology
Impact In development
Start Year 2019
 
Description Partnership with Mologic Ltd 
Organisation Mologic
Country United Kingdom 
Sector Private 
PI Contribution Dr. J. Reboud & Prof. J. Cooper have established a partnership with Mologic Ltd on the same grants, with a broad remit from human diagnostics to aquaculture for their project entitled 'Translation of origami LAMP research into a novel point-of-care diagnostic for Group B Streptococcus (GBS).' The team collaborate on several applications with Mologic ltd.
Collaborator Contribution Mologic ltd.based initially around work in aquaculture but now including aspects of human health are developing rapid diagnostic tests for a range of diseases, including with the UK Government on COVID-19. This has enabled Reboud to go through design iterations of a swab-based sample preparation system, taking into account the company's knowledge of end-users perceptions, as well as potential for manufacturability.
Impact 3 rounds of further funding; BB/T012528/1, AH/V000586/1 and MR/V035401/1.
Start Year 2020
 
Description Smart Stent - Meko Inc 
Organisation Meko
Country Germany 
Sector Private 
PI Contribution Development of a SMART intravascular biosensor for Cardiovascular disease; design, fabricate and test a working prototype device by transitioning our 2D sensor onto a flexible substrate.
Collaborator Contribution Aiding in the manufacturing of medical devices. Dr. J. Mercer partnered with Meko Inc and moved from a purely 3D printed design to a mass producible custom stent and custom graft that incorporates a new sensor platform.
Impact The sensor and graft approach was identified as optimal as advances in the telemetry package can be included extravascularly, this make surgical deployment realistic and helped us identify AVGrafts as the best device class. Work still ongoing.
Start Year 2020
 
Description Smart Stent Commercial Collaborators 
Organisation Altex Technologies Corporation
Country United States 
Sector Private 
PI Contribution Mercers group fabricated flexible sensors for the stent device, incorporated the sensor onto the device prototype and developed a telemetry system and software with a iOS/android interface to link the device to a handheld device.
Collaborator Contribution All partners aid in the future refinement of the project. In 2020 both Alter, Meko and Zeus were able to produce scalable product for Mercer and continue to develop required post processing steps. After successful trials, Meko Inc. mass produced the custom stents.
Impact Scalable device now made. Gained the support of 2 additional clinicians with an interest in this area to ensure the compliance and direction of the work. Clinical advisor group formalised. Designed bespoke AI algorithms to aid the measurement analysis from the sensor.
Start Year 2019
 
Description Smart Stent Commercial Collaborators 
Organisation Blanson
Country United Kingdom 
Sector Private 
PI Contribution Mercers group fabricated flexible sensors for the stent device, incorporated the sensor onto the device prototype and developed a telemetry system and software with a iOS/android interface to link the device to a handheld device.
Collaborator Contribution All partners aid in the future refinement of the project. In 2020 both Alter, Meko and Zeus were able to produce scalable product for Mercer and continue to develop required post processing steps. After successful trials, Meko Inc. mass produced the custom stents.
Impact Scalable device now made. Gained the support of 2 additional clinicians with an interest in this area to ensure the compliance and direction of the work. Clinical advisor group formalised. Designed bespoke AI algorithms to aid the measurement analysis from the sensor.
Start Year 2019
 
Description Smart Stent Commercial Collaborators 
Organisation Eccel Technologies
Country United Kingdom 
Sector Private 
PI Contribution Mercers group fabricated flexible sensors for the stent device, incorporated the sensor onto the device prototype and developed a telemetry system and software with a iOS/android interface to link the device to a handheld device.
Collaborator Contribution All partners aid in the future refinement of the project. In 2020 both Alter, Meko and Zeus were able to produce scalable product for Mercer and continue to develop required post processing steps. After successful trials, Meko Inc. mass produced the custom stents.
Impact Scalable device now made. Gained the support of 2 additional clinicians with an interest in this area to ensure the compliance and direction of the work. Clinical advisor group formalised. Designed bespoke AI algorithms to aid the measurement analysis from the sensor.
Start Year 2019
 
Description Smart Stent Commercial Collaborators 
Organisation Meko
Country Germany 
Sector Private 
PI Contribution Mercers group fabricated flexible sensors for the stent device, incorporated the sensor onto the device prototype and developed a telemetry system and software with a iOS/android interface to link the device to a handheld device.
Collaborator Contribution All partners aid in the future refinement of the project. In 2020 both Alter, Meko and Zeus were able to produce scalable product for Mercer and continue to develop required post processing steps. After successful trials, Meko Inc. mass produced the custom stents.
Impact Scalable device now made. Gained the support of 2 additional clinicians with an interest in this area to ensure the compliance and direction of the work. Clinical advisor group formalised. Designed bespoke AI algorithms to aid the measurement analysis from the sensor.
Start Year 2019
 
Description Smart Stent Commercial Collaborators 
Organisation Zeus Scientific
Country United States 
Sector Private 
PI Contribution Mercers group fabricated flexible sensors for the stent device, incorporated the sensor onto the device prototype and developed a telemetry system and software with a iOS/android interface to link the device to a handheld device.
Collaborator Contribution All partners aid in the future refinement of the project. In 2020 both Alter, Meko and Zeus were able to produce scalable product for Mercer and continue to develop required post processing steps. After successful trials, Meko Inc. mass produced the custom stents.
Impact Scalable device now made. Gained the support of 2 additional clinicians with an interest in this area to ensure the compliance and direction of the work. Clinical advisor group formalised. Designed bespoke AI algorithms to aid the measurement analysis from the sensor.
Start Year 2019
 
Description University of Glasgow - University of Edinburgh Smart Stent 
Organisation University of Edinburgh
Country United Kingdom 
Sector Academic/University 
PI Contribution The University of Glasgow supported this project with £10K of funds to support Dr. J. Mercer's (UofG) project to develop a SMART intravascular biosensor for Cardiovascular disease to aid in the design, fabrication and testing of a working prototype device.
Collaborator Contribution The University of Edinburgh also provided ~£65K to part fund the 2xPDRA who worked on this project.
Impact Further funding from the Glasgow Knowledge Exchange fund was awarded. Industry collaborations were established to manufacture the devices at a larger scale.
Start Year 2020
 
Description University of Glasgow - University of Edinburgh Smart Stent 
Organisation University of Glasgow
Country United Kingdom 
Sector Academic/University 
PI Contribution The University of Glasgow supported this project with £10K of funds to support Dr. J. Mercer's (UofG) project to develop a SMART intravascular biosensor for Cardiovascular disease to aid in the design, fabrication and testing of a working prototype device.
Collaborator Contribution The University of Edinburgh also provided ~£65K to part fund the 2xPDRA who worked on this project.
Impact Further funding from the Glasgow Knowledge Exchange fund was awarded. Industry collaborations were established to manufacture the devices at a larger scale.
Start Year 2020
 
Description VascuSens Graft Development - JM Stent Custom Graft Fabrication 
Organisation Eccel Technologies
Country United Kingdom 
Sector Private 
PI Contribution UofG Reinvigorating Research Award, Wellcome and MRC funding utilised to develop graft technology; three researchers in UofG supported and working on graft and sensor development.
Collaborator Contribution 1) Zeus Inc - contract service for custom graft fabrication and regular supply of samples and service to the value or £2000. 2) Vascular flow Ltd - contract services and collaborator on sensor encapsulation and Arran Biomedical Ltd for secondary processing. 3) Merlin Ltd - contract service from sensor array design and fabrication 4) NHS - lead clinical advisor and lead surgeon on porcine trial 5) Eccel Technologies Ltd - contract service for custom PCB and encapsulation design service in kind to the value of £2000.
Impact Follow on funding awarded. Multidisciplinary: UofG School of Engineering, College of Medical, Veterinary and Life Sciences Bioelectronics Unit.
Start Year 2020
 
Description VascuSens Graft Development - JM Stent Custom Graft Fabrication 
Organisation Merlin Circuit Tech Ltd
Country United Kingdom 
Sector Private 
PI Contribution UofG Reinvigorating Research Award, Wellcome and MRC funding utilised to develop graft technology; three researchers in UofG supported and working on graft and sensor development.
Collaborator Contribution 1) Zeus Inc - contract service for custom graft fabrication and regular supply of samples and service to the value or £2000. 2) Vascular flow Ltd - contract services and collaborator on sensor encapsulation and Arran Biomedical Ltd for secondary processing. 3) Merlin Ltd - contract service from sensor array design and fabrication 4) NHS - lead clinical advisor and lead surgeon on porcine trial 5) Eccel Technologies Ltd - contract service for custom PCB and encapsulation design service in kind to the value of £2000.
Impact Follow on funding awarded. Multidisciplinary: UofG School of Engineering, College of Medical, Veterinary and Life Sciences Bioelectronics Unit.
Start Year 2020
 
Description VascuSens Graft Development - JM Stent Custom Graft Fabrication 
Organisation NHS Scotland
Department NHS 24
Country United Kingdom 
Sector Public 
PI Contribution UofG Reinvigorating Research Award, Wellcome and MRC funding utilised to develop graft technology; three researchers in UofG supported and working on graft and sensor development.
Collaborator Contribution 1) Zeus Inc - contract service for custom graft fabrication and regular supply of samples and service to the value or £2000. 2) Vascular flow Ltd - contract services and collaborator on sensor encapsulation and Arran Biomedical Ltd for secondary processing. 3) Merlin Ltd - contract service from sensor array design and fabrication 4) NHS - lead clinical advisor and lead surgeon on porcine trial 5) Eccel Technologies Ltd - contract service for custom PCB and encapsulation design service in kind to the value of £2000.
Impact Follow on funding awarded. Multidisciplinary: UofG School of Engineering, College of Medical, Veterinary and Life Sciences Bioelectronics Unit.
Start Year 2020
 
Description VascuSens Graft Development - JM Stent Custom Graft Fabrication 
Organisation Vascular Flow Technologies
Country United Kingdom 
Sector Private 
PI Contribution UofG Reinvigorating Research Award, Wellcome and MRC funding utilised to develop graft technology; three researchers in UofG supported and working on graft and sensor development.
Collaborator Contribution 1) Zeus Inc - contract service for custom graft fabrication and regular supply of samples and service to the value or £2000. 2) Vascular flow Ltd - contract services and collaborator on sensor encapsulation and Arran Biomedical Ltd for secondary processing. 3) Merlin Ltd - contract service from sensor array design and fabrication 4) NHS - lead clinical advisor and lead surgeon on porcine trial 5) Eccel Technologies Ltd - contract service for custom PCB and encapsulation design service in kind to the value of £2000.
Impact Follow on funding awarded. Multidisciplinary: UofG School of Engineering, College of Medical, Veterinary and Life Sciences Bioelectronics Unit.
Start Year 2020
 
Description VascuSens Graft Development - JM Stent Custom Graft Fabrication 
Organisation Zeus Inc
Country United States 
Sector Private 
PI Contribution UofG Reinvigorating Research Award, Wellcome and MRC funding utilised to develop graft technology; three researchers in UofG supported and working on graft and sensor development.
Collaborator Contribution 1) Zeus Inc - contract service for custom graft fabrication and regular supply of samples and service to the value or £2000. 2) Vascular flow Ltd - contract services and collaborator on sensor encapsulation and Arran Biomedical Ltd for secondary processing. 3) Merlin Ltd - contract service from sensor array design and fabrication 4) NHS - lead clinical advisor and lead surgeon on porcine trial 5) Eccel Technologies Ltd - contract service for custom PCB and encapsulation design service in kind to the value of £2000.
Impact Follow on funding awarded. Multidisciplinary: UofG School of Engineering, College of Medical, Veterinary and Life Sciences Bioelectronics Unit.
Start Year 2020
 
Title DEVICE AND METHOD FOR THE NEBULISATION OF LIQUIDS 
Description A device is disclosed for the preparation of nebulised droplets, for inhalation. The device has: a surface acoustic wave (SAW) transmission surface; a SAW transducer adapted to generate and propagate SAWs along the SAW transmission surface; and an array of cavities opening at the SAW transmission surface for containing a liquid. In operation, SAWs propagating along the SAW transmission surface interact with the liquid in the cavities to produce nebulised droplets of the liquid. Operation of the device results in a nebulised plume of droplets of average diameter in the range 1-5µm. 
IP Reference CA2967124 
Protection Patent application published
Year Protection Granted 2016
Licensed Yes
Impact Spin-out company, Acu-Flow Ltd (SC624449).
 
Title NEBULISATION OF LIQUIDS 
Description A device is disclosed for the preparation of nebulised droplets, for inhalation. The device has: a surface acoustic wave (SAW) transmission surface; a SAW transducer adapted to generate and propagate SAWs along the SAW transmission surface; and an array of cavities opening at the SAW transmission surface for containing a liquid. In operation, SAWs propagating along the SAW transmission surface interact with the liquid in the cavities to produce nebulised droplets of the liquid. Operation of the 
IP Reference EP3218033 
Protection Patent granted
Year Protection Granted 2017
Licensed Yes
Impact Spin-out company, Acu-Flow Ltd (SC624449).
 
Title NEBULISATION OF LIQUIDS 
Description A device is disclosed for the preparation of nebulised droplets, for inhalation. The device has: a surface acoustic wave (SAW) transmission surface; a SAW transducer adapted to generate and propagate SAWs along the SAW transmission surface; and an array of cavities opening at the SAW transmission surface for containing a liquid. In operation, SAWs propagating along the SAW transmission surface interact with the liquid in the cavities to produce nebulised droplets of the liquid. Operation of the device results in a nebulised plume of droplets of average diameter in the range 1-5µm. 
IP Reference WO2016075209 
Protection Patent application published
Year Protection Granted 2016
Licensed Yes
Impact Spin-out company Acu-Flow Ltd (SC624449).
 
Title Nebulisation of Liquids 
Description A device is disclosed for the preparation of nebulised droplets, for inhalation. The device has: a surface acoustic wave (SAW) transmission surface; a SAW transducer adapted to generate and propagate SAWs along the SAW transmission surface; and an array of cavities opening at the SAW transmission surface for containing a liquid. In operation, SAWs propagating along the SAW transmission surface interact with the liquid in the cavities to produce nebulised droplets of the liquid. Operation of the device results in a nebulised plume of droplets of average diameter in the range 1-5 µm. 
IP Reference US2017333644 
Protection Patent application published
Year Protection Granted 2017
Licensed Yes
Impact Spin-out company Acu,-Flow Ltd (SC624449).
 
Title Nebulisation of Liquids 
Description A device is disclosed for the preparation of nebulised droplets, for inhalation. The device has: a surface acoustic wave (SAW) transmission surface; a SAW transducer adapted to generate and propagate SAWs along the SAW transmission surface; and an array of cavities opening at the SAW transmission surface for containing a liquid. In operation, SAWs propagating along the SAW transmission surface interact with the liquid in the cavities to produce nebulised droplets of the liquid. Operation of the device results in a nebulised plume of droplets of average diameter in the range 1-5µm. 
IP Reference GB1420061.2A 
Protection Patent application published
Year Protection Granted
Licensed Yes
Impact Spin-out created Acu-Flow Ltd (SC624449).
 
Title Nebulisation of liquids 
Description A device is disclosed for the preparation of nebulised droplets, for inhalation. The device has: a surface acoustic wave (SAW) transmission surface; a SAW transducer adapted to generate and propagate SAWs along the SAW transmission surface; and an array of cavities opening at the SAW transmission surface for containing a liquid. In operation, SAWs propagating along the SAW transmission surface interact with the liquid in the cavities to produce nebulised droplets of the liquid. Operation of the device results in a nebulised plume of droplets of average diameter in the range 1-5µm. 
IP Reference AU2015345130 
Protection Patent application published
Year Protection Granted 2017
Licensed Yes
Impact Spin-out company, Acu-Flow Ltd (SC624449).
 
Title App software for vascular data 
Description iOS/Android App software for wireless interrogation of data sets. 
Type Of Technology Webtool/Application 
Year Produced 2022 
Impact N/A 
 
Title HCV-GLUE 
Description The Genes Linked by Underlying Evolution (GLUE), software system is to enable a range of sequence data resources for various viruses. GLUE is a toolkit for storage and data analysis with functionalities for diagnostic and viral analysis problems. Projects with viral sequence DNA are hosted within GLUE. 
Type Of Technology Webtool/Application 
Year Produced 2017 
Open Source License? Yes  
Impact collaboration with Public Health England 
URL http://tools.glue.cvr.ac.uk/#/home
 
Company Name Nebu-Flow Ltd (previously Acu-Flow Ltd) 
Description A spin-out company, Nebu-Flow Ltd., was formed in March 2019 with the aim to transform respiratory drug delivery platform, commercialising the nebuliser technology. 
Year Established 2019 
Impact They have shown that we can increase inhalable fraction to above 90% (up to 60% higher than current devices in the market).
Website https://nebuflow.com/
 
Company Name PROTOBIOTIX LIMITED 
Description for development of novel therapeutics 
Year Established 2018 
Impact none yet
 
Description Oxford Global inhalation Drug Delivery formulations 2021 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Industry/Business
Results and Impact Senior experts in the pharmaceutical science community to address critical strategic developments and technical innovation in formulation, drug delivery and drug product development. Over 500 pharmaceutical scientists working across formulation, drug delivery and drug product manufacturing science & technologies, representing global pharmaceutical organisations, leading biotechnology companies and internationally-renowned academic institutions.
Year(s) Of Engagement Activity 2021
URL https://www.oxfordglobal.co.uk/formulation-delivery-series-uk-virtual/formulation/
 
Description Presentation at Formulation & Delivery Series UK 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Policymakers/politicians
Results and Impact Presentation given
Year(s) Of Engagement Activity 2019
URL https://www.oxfordglobal.co.uk/formulation-delivery-series-uk/
 
Description Presentation at Glasgow Microbiology Collective 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Conference event
Year(s) Of Engagement Activity 2019
URL https://twitter.com/glasgowmicrocol?lang=en
 
Description Presentation at MicroTAS 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Presentation given.
Year(s) Of Engagement Activity 2019
URL https://microtas2019.org/
 
Description presentation at Phages 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Presentation - 'Synthetic Phage-inducible Chromosomal Islands, the Trojan Horse against AMR'
Year(s) Of Engagement Activity 2019
URL http://lpmhealthcare.com/phages-2019/speakers-agenda/