Numerical investigation of aerofoil noise

Lead Research Organisation: University of Southampton
Department Name: Faculty of Engineering & the Environment

Abstract

With the sustained increase in air travel, noise from aeroplanes remains a significant environmental problem. Due to the considerable reduction in jet noise that has been achieved by designing turbofan jet engines with increasingly large bypass ratios, for modern aircraft in approach, fan noise and airframe noise are among the most important contributors to the perceived sound on the ground. At the same time, aerofoil noise from onshore wind turbines considerably limits their public acceptance despite the economical and political need for renewable energy production. Therefore, a detailed understanding of the physical mechanisms responsible for aerofoil noise and accurate prediction methods would be highly beneficial for a wide range of applications. A large percentage of the overall aerofoil noise can be attributed to aerofoil self-noise, i.e. noise produced by the interaction between the aerofoil with its own boundary layers and wake, with trailing edge noise being the dominant noise source. For that reason, most currently used noise prediction models consider trailing edge noise only.A preliminary fundamental study has shown that for cases where separation events occur on aerofoils, the current noise prediction models are not adequate because noise sources other than trailing edge noise exist. Therefore, there clearly is a need for a detailed investigation of noise generation mechanisms on aerofoils at moderate Reynolds number. For this type of research, it is paramount to perform Direct Numerical Simulations (DNS) to eliminate the disadvantages encountered when using Large Eddy Simulations, such as uncertainties with modelling small scale turbulence, and problems with predicting laminar-turbulent transition. Until recently, DNS of flow separation events were only possible for simplified geometries, such as flat plates, and could not include a trailing edge or the interaction of the separation with the potential flow. However, with the current and future generations of supercomputers, DNS can now be performed of entire aerofoil configurations.
 
Description Additional noise sources other than trailing-edge noise were identified and quantified. Also, the mechanisms of noise reduction by trailing-edge serrations were found. Prior to this study there had been no direct simulations that could provide details on how serrated trailing edges reduce aerofoil noise.
Exploitation Route Manufacturers of, e.g., wind turbine blades could use serrations to reduce noise from wind turbines.
Sectors Aerospace, Defence and Marine,Energy

 
Description The findings are being used as baseline for further research in this area. At this point we are only aware of academic impact of the work.
First Year Of Impact 2010
Sector Aerospace, Defence and Marine,Energy
 
Description Royal Society International Exchange Scheme
Amount £12,000 (GBP)
Organisation The Royal Society 
Sector Charity/Non Profit
Country United Kingdom
Start 01/2014 
End 12/2015