Adaptive spatial control of soft x-rays for coherent microscopy applications

Lead Research Organisation: Swansea University
Department Name: College of Science

Abstract

Imaging the structure and motion of molecular-scale systems is of fundamental importance in science. Imaging such small spatial features requires the use of light with wavelengths of the order of a few nanometers, while resolving fast dynamics in these systems requires pulses of light with durations of attoseconds (1as = 1 thousandth of a billionth of a nanosecond). Producing bright light sources which meet these requirements represents a significant challenge but the potential rewards are huge, with applications spanning biomedical science to advanced engineering and nanotechnology.

One source of short wavelength radiation is high-harmonic generation (HHG). This is a nonlinear process which can occur when an intense laser pulse is focussed into a gas, causing the atoms to emit bursts of soft x-rays. HHG is a very attractive source for many applications since the resulting soft x-ray beams are coherent, or laser-like, and can be generated using compact laser systems. The HHG pulses are also extremely short - on the order of attoseconds - and correspond to the natural timescales of electronic motion.

Recent experiments have shown that HHG can be used to drive coherent diffractive imaging (CDI) experiments, previously only possible at large-scale facilities. In CDI an object is illuminated by a coherent beam of x-rays and the diffracted light recorded. Algorithms are then used to determine the shape of the object from the diffracted pattern. CDI performed at large-scale facilities has proven to be an extraordinarily powerful technique, enabling the structures of cells and nanocrystals to be determined. Laboratory-scale CDI driven by HHG is therefore an attractive route towards compact, ultrafast, nanoscale imaging, and would be a revolutionary scientific tool.

However, a key step in realizing the full potential of HHG is to control the spatial structure of these beams. CDI is very sensitive to the coherence and shape of the illuminating beam while the nonlinearity of the HHG process can result in beams which exhibit complex structures. Controlling these beams is non-trivial since conventional optics, such as lenses, absorb strongly at these wavelengths. In this programme we will achieve precise control of HHG beams by implementing two innovations. The first uses a new approach for manipulating the shape of intense laser pulses which was developed by our project partners at Oxford University. This technique combines two programmable optical elements, one reflective and one refractive, in order to allow arbitrary shaping of an ultrafast laser beam. The sensitively of the HHG process to the driving laser means that by precisely controlling the laser beam we will be able to modify the properties of the generated harmonics. The second innovation is that we will be able to measure directly, for the first time, the changes in the structure of the HHG field as the driving beam is varied. To do this we will implement a technique which we developed recently which uses a pair of pinholes in the HHG beam to create an interference pattern. By analysing the interference pattern as the pinholes are moved we can determine the intensity, curvature, and coherence of the HHG beam with high accuracy.

This control system will allow us to dramatically improve the power of HHG-driven CDI. For example, we will be able to greatly increase the brightness of the HHG source, improve its coherence, and control its wavefront curvature. This will result in much sharper images, higher resolutions, and faster image acquisitions. It will also enable us to image complex targets, such as viruses and nanoparticles.

This research programme will bring together powerful new techniques in pulse-shaping and x-ray metrology to dramatically extend the scope of compact x-ray imaging. The development of such a system is crucial for a variety of areas such as high-contrast biological imaging, advanced lithography, materials engineering, and medicine.

Planned Impact

The goal of this work is the development of new techniques for controlling the spatial structure of ultrafast x-ray pulses and their application to new imaging methods capable of probing matter at the molecular scale. The small size of HHG sources would bring to university-scale laboratories research which is currently limited to national facilities, greatly increasing access to ultrafast imaging and probing techniques.

There is little doubt that the techniques proposed in our research program could be a revolutionary tool in many areas of the medical, physical, and biological sciences, and would bring clear benefits to society. During this research proposal we will develop new methods for probing the structure of materials with nanometre-scale spatial resolution. The higher penetration depths of the soft x-ray sources we will develop, compared with those of electrons, will enable high resolution imaging of significantly thicker specimens than can be achieved using conventional techniques, such as scanning electron microscopy. In addition, the high-contrasts achievable with these sources will allow chemical-sensitive information of objects to be extracted. Such a novel laboratory-based imaging system would be particularly powerful for engineering and materials research, enabling the 3D chemical composition and morphology of nanostructures to be determined. This could be used to investigate processes ranging from heat transportation in lithographic devices, to in-situ monitoring of strain-induced deformations in field-effect transistors. By developing such a system we hope to provide a tool which will enable breakthroughs in areas such as data storage, ultrafast switching, novel materials, and light harvesting.

This project focusses on controlling the spatial properties of HHG sources for imaging applications. However, the duration of the pulses which are generated are at least two orders of magnitude shorter than possible with conventional RF-based sources. The extremely high spatial and temporal resolutions which can be achieved with these sources will open up a range of new scientific avenues. The long term objective of this research is to achieve a compact imaging system capable of resolving the chemical composition of materials at nanometre spatial resolutions and femtosecond timescales. Such dynamic imaging would revolutionize our understanding of many of the fundamental processes in science such as photosynthesis, energy coupling in magnetic systems, photo-induced phase transitions in strongly-correlated systems, and enzyme catalysis. Observing, and potentially controlling, the dynamics of such systems will lead to new techniques for designing pharmaceuticals and drug delivery systems; generating and storing energy; increasing the capacity and speed of memory storage; and controlling matter at the quantum level. There is no doubt that developing these capabilities will bring enormous benefits to society.
 
Description The main findings in this project have been:
1. The development of a new type of x-ray interferometer: This interferometer uses an optical effect, known as the Gouy phase, to introduce a delay between two very short bursts of coherent x-ray radiation, which are generated when an intense laser pulse interacts with two gas targets. Since the technique is all-optical it is extremely stable, and not prone to timing jitters inherent in other techniques. In contrast with other techniques, this interferometer also records the spatially-resolved profile of the interfering x-ray beams which gives rise to rich data sets. We have been able to demonstrate that by analysing these data sets the motion of electrons in the laser field can be determined with a time resolution of a few attoseconds (1 attosecond = 1 billion billionths of a second). Tracking the motion of electrons at this scales open new possibilities for measuring ultrafast chemical reactions in complex molecular systems.

2. Enhancement of the brilliance of ultrafast x-rays using shaped laser beams: Ultrafast x-ray beams can be generated when an intense laser pulse interacts with a gas. In a normal setup the laser beam which generates the x-rays has a Gaussian profile. However, since the laser-gas interaction is highly nonlinear the parameters of the laser can have a dramatic influence on the properties of the generated x-ray beam, such as its brightness and shape. We have demonstrated that by using a device known as a spatial light modulator, it is possible to manipulate the shape of the laser beam, and consequently control specific properties of the generated x-rays. By transforming the laser profile of the super-Gaussian profile we have shown that the x-ray brilliance (number of photons per time, solid angle and frequency) can be increased by almost an order of magnitude. This opens a new route for producing brighter, table-top sources of ultrafast coherent x-rays.

3. Comparison of ionization models used in coherent x-ray generation: Ionization (the removal of electrons from an atom) is a key stage in the generation of coherent x-rays using intense laser pulses. We developed a phenomenological model of the x-ray generation process, which incorporated two separate models of the ionization stage, namely the Yudin-Ivanov and Ammosov-Delone-Krainov models. By means of a tunable laser system we generated x-rays using a range of laser wavelengths and target gases, and compared the results with our phenomenological model. We established that the Yudin-Ivanov model gave superior agreement between theory and experiment.

4. Method to improve the signal-to-noise of x-ray Fourier transform holographic imaging: A spatial light modulator can be used to programmably manipulate the relative position and intensities of two x-ray beams. This allows holographic imaging to be performed with two, independently-controllable beams, yielding superior signal-to-noise than conventional single-beam imaging.
Exploitation Route The x-ray interferometry technique developed during this project may find applications in the metrology of ultrafast chemical reactions, although additional experimental work is needed to demonstrate this technique on complex molecular systems. In order to take these findings forward further research would be required to move beyond proof of concept to real applications. Potential applications include the characterization of transparent gases at extreme ultraviolet wavelengths, as well high-resolution spectroscopy of aligned molecules.

The work performed on controlling the brilliance of laser-driven x-rays may find applications in the areas of x-ray microscopy, holography, and material characterization. To take these findings forward the adaptive optics techniques demonstrated in this project would be applied to an x-ray imaging setup. The ability to manipulate the spatial profile and brilliance of an x-ray beam impinging on a sample could provide new opportunities for characterizing defects in materials and may be of interest for semiconductor inspection.

The work on improving the signal-to-noise of an x-ray-based holographic imaging system could find applications in high-resolution imaging of biological samples and nanostructured materials. To take these findings forward research in the development of adaptive optics capable of withstanding high average powers is needed, as the damage threshold of current devices limits the number of beams that can be generated.
Sectors Chemicals,Electronics,Manufacturing, including Industrial Biotechology

 
Description Adaptive shaping with Oxford 
Organisation University of Oxford
Department Department of Physics
Country United Kingdom 
Sector Academic/University 
PI Contribution My research team designed an x-ray metrology system and incorporated it into a beamline at Oxford. This was used to measure the spatial properties of ultrafast x-rays produced via high-intensity laser-matter interactions.
Collaborator Contribution Project partners provided access to a high intensity laser system necessary for the production of ultrafast x-rays. Project partners also provided intellectual input and knowledge transfer in the area of adaptive optics techniques for shaping laser beams.
Impact This is a multidisciplinary collaboration combining physics and engineering.
Start Year 2016