Single Photons - Expanding the Spectrum (SPEXS)
Lead Research Organisation:
Heriot-Watt University
Department Name: Sch of Engineering and Physical Science
Abstract
Single-photon counting - the ability to faithfully capture the single quantum of light - is a critical capability for a wide range of new low-light sensing applications and a host of emerging photonic quantum technologies. This proposed Programme Grant aims to significantly expand the operational region of single-photon detectors well beyond silicon's 1000nm wavelength limit into the short-wave infrared (SWIR) region of wavelengths between 1400nm to 3000nm, and part of the mid-wave infrared (MWIR) region between 3000nm and 5000nm. By scaling up SWIR and MWIR semiconductor and superconductor single-photon detectors to large area focal plane arrays, we will produce revolutionary new cameras with picosecond timing resolution which can be used, for example, to see though fog in automotive lidar scenarios, as well as allowing imaging and sensing in new applications in environmental monitoring, healthcare, and security and defence.
The project will involve the design and fabrication of innovative new detector platforms of Ge-on-Si and III-V semiconductor detectors. The detectors are capable of single-photon sensitivity in the SWIR and MWIR regions, and will be fabricated in detector array format. We will also examine superconducting nanowires to expand their operation into the MWIR regions and fabricate arrayed detector configurations. A key part of the project is to integrate these arrayed detector technologies with read-out circuitry capable of rapid, low latency delivery of single-photon data. In addition, we will utilise micro-optic technology to optimise detection efficiency and demonstrate multiple wavelength filtering.
The cameras will be designed for use in a range of applications areas, including lidar, where the time-of-flight of the return photons can be used for the measurement of distance. In arrayed detector format, we will make cameras from which we will demonstrate three-dimensional imaging at long distance, where the sensitivity and time-resolution will enhance imaging through dense fog and other obscurants. We will demonstrate our detector technologies in quantum cryptography applications, where encryption keys can be shared between two users. By sending data encoded in single-photons it is possible for the sender and receiver to share a secure, random key known only to them. The most critical component in this form of quantum communication is the single-photon detector - we will demonstrate the use of our detectors both in optical fibre and free-space quantum key distribution scenarios. Other emerging applications in spectroscopy and biophotonics will be demonstrated.
The project will involve the design and fabrication of innovative new detector platforms of Ge-on-Si and III-V semiconductor detectors. The detectors are capable of single-photon sensitivity in the SWIR and MWIR regions, and will be fabricated in detector array format. We will also examine superconducting nanowires to expand their operation into the MWIR regions and fabricate arrayed detector configurations. A key part of the project is to integrate these arrayed detector technologies with read-out circuitry capable of rapid, low latency delivery of single-photon data. In addition, we will utilise micro-optic technology to optimise detection efficiency and demonstrate multiple wavelength filtering.
The cameras will be designed for use in a range of applications areas, including lidar, where the time-of-flight of the return photons can be used for the measurement of distance. In arrayed detector format, we will make cameras from which we will demonstrate three-dimensional imaging at long distance, where the sensitivity and time-resolution will enhance imaging through dense fog and other obscurants. We will demonstrate our detector technologies in quantum cryptography applications, where encryption keys can be shared between two users. By sending data encoded in single-photons it is possible for the sender and receiver to share a secure, random key known only to them. The most critical component in this form of quantum communication is the single-photon detector - we will demonstrate the use of our detectors both in optical fibre and free-space quantum key distribution scenarios. Other emerging applications in spectroscopy and biophotonics will be demonstrated.
Planned Impact
This Programme Grant investigates innovative single-photon detection platforms and their applications in a range of emerging application areas in the short-wave and mid-wave infrared. This project will have an impact on society, industry, academia and the UK economy and will be used as a focus for engagement with international academia, industry and government stakeholders.
UK academia has a lead in a number of aspects of single-photon detection, single-photon lidar and quantum communications. We are well-placed to deliver outstanding impact beyond only academic research as UK industry starts to meaningfully engage with the single-photon community. This Programme Grant will deliver a realistic opportunity to create a UK manufacturing chain in picosecond resolution infrared single-photon cameras. This will bring obvious economic benefits to the UK, as we develop innovative new designs of cameras that can be manufactured in this country. These cameras can be used in a number of other products by UK end-users for applications in, for example: in automotive lidar; terrain mapping; hyperspectral imaging; environmental remote sensing; and healthcare. This Programme Grant has already engaged 17 industrial partners as part of the manufacturing chain or end-user community who have committed almost £1.7M in in-kind contributions. We will work closely with our Industry Partners and External Advisory Board to maximise impact and appropriately transfer the technology to industry. In addition to the advice from our Industry Partners, we will establish a portfolio of patents to help protect the intellectual property created in this Programme Grant.
The societal benefits of this Programme Grant will be wide-ranging. For example, short-wave infrared automotive lidar will eventually be used with other sensors to provide fully autonomous vehicles which will eventually play a key role in reducing the overall costs of transportation, with potentially huge societal benefits in terms of road safety, traffic congestion, pollution, freight transportation, and individual mobility. Short-wave infrared single-photon detectors can provide singlet oxygen explicit dosimetry - a key step in the photodynamic therapy of cancer. These detectors can be used for greenhouse gas mapping in the short and mid-wave infrared, giving valuable information for climate change analysis and pollution monitoring. There are a number of routes towards impact for a project that delivers such disruptive enabling optical detector platform technologies.
UK academia has a lead in a number of aspects of single-photon detection, single-photon lidar and quantum communications. We are well-placed to deliver outstanding impact beyond only academic research as UK industry starts to meaningfully engage with the single-photon community. This Programme Grant will deliver a realistic opportunity to create a UK manufacturing chain in picosecond resolution infrared single-photon cameras. This will bring obvious economic benefits to the UK, as we develop innovative new designs of cameras that can be manufactured in this country. These cameras can be used in a number of other products by UK end-users for applications in, for example: in automotive lidar; terrain mapping; hyperspectral imaging; environmental remote sensing; and healthcare. This Programme Grant has already engaged 17 industrial partners as part of the manufacturing chain or end-user community who have committed almost £1.7M in in-kind contributions. We will work closely with our Industry Partners and External Advisory Board to maximise impact and appropriately transfer the technology to industry. In addition to the advice from our Industry Partners, we will establish a portfolio of patents to help protect the intellectual property created in this Programme Grant.
The societal benefits of this Programme Grant will be wide-ranging. For example, short-wave infrared automotive lidar will eventually be used with other sensors to provide fully autonomous vehicles which will eventually play a key role in reducing the overall costs of transportation, with potentially huge societal benefits in terms of road safety, traffic congestion, pollution, freight transportation, and individual mobility. Short-wave infrared single-photon detectors can provide singlet oxygen explicit dosimetry - a key step in the photodynamic therapy of cancer. These detectors can be used for greenhouse gas mapping in the short and mid-wave infrared, giving valuable information for climate change analysis and pollution monitoring. There are a number of routes towards impact for a project that delivers such disruptive enabling optical detector platform technologies.
Organisations
- Heriot-Watt University (Lead Research Organisation)
- Toshiba Europe Limited (Project Partner)
- HORIBA Jobin Yvon IBH (Project Partner)
- Helia Photonics (United Kingdom) (Project Partner)
- Kelvin Nanotechnology Ltd (Project Partner)
- Faraday Scientific Limited (Project Partner)
- Teledyne e2v (United Kingdom) (Project Partner)
- JAGUAR LAND ROVER LIMITED (Project Partner)
- STMicroelectronics (Project Partner)
- BT plc (Project Partner)
- Photon Force Ltd (Project Partner)
- Thales UK Limited (Project Partner)
- Compound Semiconductor Tech Global Ltd (Project Partner)
- Arqit Limited (Project Partner)
- ID Quantique (Project Partner)
- DSTL Porton Down (Project Partner)
- Leonardo Limited (Project Partner)
- IQE PLC (Project Partner)
Publications
Azem A
(2024)
Mid-infrared characterization of NbTiN superconducting nanowire single-photon detectors on silicon-on-insulator
in Applied Physics Letters
Belmekki M
(2022)
Fast Task-Based Adaptive Sampling for 3D Single-Photon Multispectral Lidar Data
in IEEE Transactions on Computational Imaging
Belmekki MAA
(2023)
3D target detection and spectral classification for single-photon LiDAR data.
in Optics express
Blain T
(2024)
Low Noise Equivalent Power InAs Avalanche Photodiodes for Infrared Few-Photon Detection
in IEEE Transactions on Electron Devices
Connolly PWR
(2021)
Simultaneous multi-spectral, single-photon fluorescence imaging using a plasmonic colour filter array.
in Journal of biophotonics
Fleming F
(2024)
Surface-normal illuminated pseudo-planar Ge-on-Si avalanche photodiodes with high gain and low noise
in Optics Express
Hadfield R
(2023)
Single-photon detection for long-range imaging and sensing
in Optica
| Title | Visualization 1.mp4 |
| Description | Demonstration in free space of the three dimensional reconstruction and visualization of the scene with low latency. The video was obtained by processing 50 binary frames with the RT3D method, resulting in a visualization of 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_1_mp4/22050194/1 |
| Title | Visualization 1.mp4 |
| Description | Demonstration in free space of the three dimensional reconstruction and visualization of the scene with low latency. The video was obtained by processing 50 binary frames with the RT3D method, resulting in a visualization of 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_1_mp4/22050194 |
| Title | Visualization 2.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation in clear water. The video was obtained by processing 50 binary frames with the Ensemble Method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_2_mp4/22050575 |
| Title | Visualization 2.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation in clear water. The video was obtained by processing 50 binary frames with the Ensemble Method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_2_mp4/22050575/1 |
| Title | Visualization 3.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation at a level of scattering water equivalent to 4.8 AL. The video was obtained by processing 50 binary frames with the Ensemble Method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_3_mp4/22050782/1 |
| Title | Visualization 3.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation at a level of scattering water equivalent to 4.8 AL. The video was obtained by processing 50 binary frames with the Ensemble Method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_3_mp4/22050782 |
| Title | Visualization 4.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation at a level of scattering water equivalent to 5.5 AL. The video was obtained by processing 50 binary frames with the Ensemble Method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_4_mp4/22051007/1 |
| Title | Visualization 4.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation at a level of scattering water equivalent to 5.5 AL. The video was obtained by processing 50 binary frames with the Ensemble Method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_4_mp4/22051007 |
| Title | Visualization 5.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation in clear water. The video was obtained by processing 50 binary frames with the Cross correlation method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_5_mp4/22051229/1 |
| Title | Visualization 5.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation in clear water. The video was obtained by processing 50 binary frames with the Cross correlation method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_5_mp4/22051229 |
| Title | Visualization 6.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation at a level of scattering water equivalent to 5.5 AL. The video was obtained by processing 50 binary frames with the Cross correlation method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_6_mp4/22051448 |
| Title | Visualization 6.mp4 |
| Description | Video of the point-cloud, 3D profile, and intensity map of the T-connector along the perpendicular orientation at a level of scattering water equivalent to 5.5 AL. The video was obtained by processing 50 binary frames with the Cross correlation method, which meant a video rate equivalent to 10 frames per second. |
| Type Of Art | Film/Video/Animation |
| Year Produced | 2023 |
| URL | https://opticapublishing.figshare.com/articles/media/Visualization_6_mp4/22051448/1 |
| Description | DSTL Advanced Vision |
| Amount | £396,595 (GBP) |
| Funding ID | ACC6012970 |
| Organisation | Defence Science & Technology Laboratory (DSTL) |
| Sector | Public |
| Country | United Kingdom |
| Start | 03/2020 |
| End | 03/2022 |
| Description | Single Photon Infrared Imaging, Detection and Ranging (SPIDAR) |
| Amount | £5,700,000 (GBP) |
| Funding ID | Application ref 44835 |
| Organisation | Innovate UK |
| Sector | Public |
| Country | United Kingdom |
| Start | 09/2020 |
| End | 09/2023 |
| Description | UK Quantum Technology Hub in Quantum Enhanced Imaging |
| Amount | £23,061,154 (GBP) |
| Funding ID | EP/M01326X/1 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 12/2014 |
| End | 11/2019 |
| Description | Ultrafast Single-photon Detection for Quantum Applications |
| Amount | £1,353,048 (GBP) |
| Funding ID | EP/W003252/1 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 03/2022 |
| End | 03/2027 |
| Title | Data for: InAs n-i-p Diodes Fabricated using S and Si Ion Implantation |
| Description | Files in this repository correspond to the results in "InAs n-i-p Diodes Fabricated using S and Si Ion Implantation" submitted to IEEE Transactions on Electron Devices.The figure files contain the graphical figures (.png) found within the manuscript and the data (.csv) required to replicate the figures.Manuscript Abstract:Planar Indium Arsenide (InAs) electron avalanche photodiodes (e-APDs) can provide significant avalanche gain with negligible excess noise. Reported InAs e-APDs are so far all top-side illuminated p-i-n diodes. Yet back-side illuminated n-i-p diodes are needed to be compatible with focal plane arrays (bump-bonding process). This work reports n-type ion implantation into i-InAs layer grown on p-InAs layers, forming n-i-p diodes for the first time. Electrical and optical characteristics of S and Si implanted mesa and planar photodiodes are investigated both experimentally and through simulation. The mesa InAs n-i-p diodes fabricated from implanted samples exhibit similar dark current densities to previously reported Be implanted mesa InAs p-i-n diodes. A peak responsivity of 1.09 A/W at 2004 nm wavelength was demonstrated using S implanted detectors after rapid thermal annealing at 600°C for 30s. The simple planar diodes exhibit higher dark current compared to Be implanted planar InAs p-i-n diodes. This is attributed to poor junction isolation resulting from n-type unintentional doping in intrinsic InAs layers. This was mitigated by adding isolation trenches around the diodes (removal of material or introducing p-doping). Therefore, we have demonstrated a promising approach for fabricating bump-bonding compatible and back-illuminated InAs n-i-p planar diodes. |
| Type Of Material | Database/Collection of data |
| Year Produced | 2025 |
| Provided To Others? | Yes |
| URL | https://orda.shef.ac.uk/articles/dataset/Data_for_InAs_n-i-p_Diodes_Fabricated_using_S_and_Si_Ion_Im... |
| Title | Fabrication of Infrared Linear Arrays of InAs Planar Avalanche Photodiodes |
| Description | These files correspond to the data presented in: Fabrication of Infrared Linear Arrays of InAs Planar Avalanche Photodiodes |
| Type Of Material | Database/Collection of data |
| Year Produced | 2022 |
| Provided To Others? | Yes |
| URL | https://figshare.shef.ac.uk/articles/dataset/Fabrication_of_Infrared_Linear_Arrays_of_InAs_Planar_Av... |
| Title | Fabrication of Infrared Linear Arrays of InAs Planar Avalanche Photodiodes |
| Description | These files correspond to the data presented in: Fabrication of Infrared Linear Arrays of InAs Planar Avalanche Photodiodes |
| Type Of Material | Database/Collection of data |
| Year Produced | 2022 |
| Provided To Others? | Yes |
| URL | https://figshare.shef.ac.uk/articles/dataset/Fabrication_of_Infrared_Linear_Arrays_of_InAs_Planar_Av... |
| Title | Low Noise Equivalent Power InAs Avalanche Photodiodes for Infrared Few-Photon Detection |
| Description | Data from "Low Noise Equivalent Power InAs Avalanche Photodiodes for Infrared Few-Photon Detection". Files include .png images of each figure and .csv files containing the data from each figure. Fig. 1 - Simulated Be implant profile produced using transport of ions in Matter software.Fig. 2 - Cross-sectional diagram of planar InAs APD device structure (not drawn to scale) (top). Scanning electron microscope image of several 80 × 80 µm2 pixels (bottom).Fig. 3 - Capacitance (open symbols) and depletion width (closed symbols) of a 200 × 200 µm2 pixel (top) and unintentional doping level extracted from the capacitance measurement (bottom).Fig. 4 - Reverse dark current density (solid line), avalanche gain (symbols), and gain normalized dark current density (dashed line) of a packaged 80 × 80 µm2 pixel measured in a liquid nitrogen cooled cryostat.Fig. 5 - 1550-nm wavelength NEP of the APD/preamp configuration measured around 10 kHz with a 100-Hz span (symbols) and theoretical NEP (solid line).Fig. 6 - SNR measurement (top) on a cooled 80 × 80 µm2 pixel optical power of 8.77 pW. Measured FFT spectra (bottom) at avalanche gains of 1 (solid black line), 54 (red dashed line), and 105 (dotted green line).Fig. 7 - FFT spectra around 10 kHz (12-Hz span) with the detectors illuminated with weak 10-kHz modulated 1550-nm wavelength pulses.Fig. 8 - Magnitudes of signal peaks at low optical powers (symbols) and linear fit (solid line).Fig. 9 - Comparison of current-voltage characteristics of 80 × 80 µm2 (red lines) and a 200 × 200 µm2 (black lines) pixels with (solid lines) and without (dashed lines) shielding from blackbody radiation.Fig. 10 - Reverse dark current density temperature dependence of a the temperature dependence of the diode's ideality factor extracted from shielded 200 × 200 µm2 pixel between 80 and 280 K. The inset shows the forward current-voltage data of Fig. 9.Fig. 11 - Temperature dependence of the dark current density at -0.1 V for a 200 × 200 µm2 pixel (symbols) and Arrhenius fits between 295 and 180 K (dashed line) and 180 and 120 K (dotted line).Fig. 12 - Dark currents at -0.1 V of pixels of different areas measured between 295 and 140 K (symbols) plotted with expected bulk dark currents extrapolated from the largest area pixels (dashed lines). |
| Type Of Material | Database/Collection of data |
| Year Produced | 2024 |
| Provided To Others? | Yes |
| URL | https://orda.shef.ac.uk/articles/dataset/Low_Noise_Equivalent_Power_InAs_Avalanche_Photodiodes_for_I... |
