The Flexible Fuel Cell
Lead Research Organisation:
University College London
Department Name: Chemical Engineering
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
People |
ORCID iD |
Daniel Brett (Principal Investigator) |
Publications
Obeisun O
(2014)
Development of open-cathode polymer electrolyte fuel cells using printed circuit board flow-field plates: Flow geometry characterisation
in International Journal of Hydrogen Energy
Obeisun O
(2015)
Study of water accumulation dynamics in the channels of an open-cathode fuel cell through electro-thermal characterisation and droplet visualisation
in International Journal of Hydrogen Energy
Obeisun O
(2017)
Ex-situ characterisation of water droplet dynamics on the surface of a fuel cell gas diffusion layer through wettability analysis and thermal characterisation
in International Journal of Hydrogen Energy
Millichamp J
(2015)
Mechanisms and effects of mechanical compression and dimensional change in polymer electrolyte fuel cells - A review
in Journal of Power Sources
Meyer Q
(2013)
A multichannel frequency response analyser for impedance spectroscopy on power sources
in Journal of Electrochemical Science and Engineering
Meyer Q
(2014)
Dead-ended anode polymer electrolyte fuel cell stack operation investigated using electrochemical impedance spectroscopy, off-gas analysis and thermal imaging
in Journal of Power Sources
Mason T
(2013)
A study of the effect of water management and electrode flooding on the dimensional change of polymer electrolyte fuel cells
in Journal of Power Sources
Gabreab E
(2014)
An electrochemical treatment to improve corrosion and contact resistance of stainless steel bipolar plates used in polymer electrolyte fuel cells
in Journal of Power Sources
Engebretsen E
(2016)
Electro-thermal impedance spectroscopy applied to an open-cathode polymer electrolyte fuel cell
in Journal of Power Sources
Engebretsen E
(2017)
Electrochemical pressure impedance spectroscopy applied to the study of polymer electrolyte fuel cells
in Electrochemistry Communications
Daniels F
(2014)
Current collector design for closed-plenum polymer electrolyte membrane fuel cells
in Journal of Power Sources
Bharath V
(2017)
Effect of humidity on the interaction of CO2 with alkaline anion exchange membranes probed using the quartz crystal microbalance
in International Journal of Hydrogen Energy
Bharath V
(2017)
Alkaline anion exchange membrane degradation as a function of humidity measured using the quartz crystal microbalance
in International Journal of Hydrogen Energy
Bharath V
(2016)
Measurement of water uptake in thin-film Nafion and anion alkaline exchange membranes using the quartz crystal microbalance
in Journal of Membrane Science
Ang S
(2011)
Fuel cell systems optimisation - Methods and strategies
in International Journal of Hydrogen Energy
Adam A
(2015)
Options for residential building services design using fuel cell based micro-CHP and the potential for heat integration
in Applied Energy
Description | A completely new class of fuel cell hardware has been developed based on the use of printed circuit board (PCB) technology. This allows very low cost and high manufacture capacity. |
Exploitation Route | We were the winners of the Carbon Trust Fuel Cell Challenge adn are currently planning the formation of a spin-out company to exploit our patented technology. |
Sectors | Aerospace, Defence and Marine,Digital/Communication/Information Technologies (including Software),Energy,Leisure Activities, including Sports, Recreation and Tourism,Manufacturing, including Industrial Biotechology,Transport |
URL | http://www.ucl.ac.uk/electrochemical-innovation-lab |
Description | Our new class of fuel cell has demonstrated >30% cost reduction over conventional fuel cells and the ability to be used in auto and portable power electronics devices, as well as more niche markets such as unmanned aerial vehicles. This technology won the Carbon Trust Fuel Cell Challenge and our patented technology is currently being planned to be spun out into a company. |
First Year Of Impact | 2014 |
Sector | Energy,Environment,Manufacturing, including Industrial Biotechology,Transport |
Impact Types | Societal,Economic |
Company Name | Amalyst |
Description | Diagnostic techniques developed in this project were key to doing the research on fuel cell catalysts that led to the spin out of Amalyst from UCL in 2012. |
Year Established | 2012 |
Impact | Development of a fuel cell catalyst as a replacement for platinum that is <40% the cost. |
Website | http://www.amalyst.com |