Multiscale in-situ characterisation of degradation and reactivity in solid oxide fuel cells
Lead Research Organisation:
University College London
Department Name: Chemical Engineering
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Organisations
People |
ORCID iD |
Daniel Brett (Principal Investigator) |
Publications
Alexander S
(2012)
A combinatorial nanoprecursor route for direct solid state chemistry: Discovery and electronic properties of new iron-doped lanthanum nickelates up to La4Ni2FeO10-d
in Solid State Ionics
Manage M
(2014)
A modelling approach to assessing the feasibility of the integration of power stations with steam electrolysers
in Chemical Engineering Research and Design
Robinson JB
(2014)
A novel high-temperature furnace for combined in situ synchrotron X-ray diffraction and infrared thermal imaging to investigate the effects of thermal gradients upon the structure of ceramic materials.
in Journal of synchrotron radiation
Toleuova A
(2013)
A Rotating Electrolyte Disc (RED) for Operation in Liquid Metal Anode SOFCs
in ECS Transactions
Millichamp J
(2013)
A study of carbon deposition on solid oxide fuel cell anodes using electrochemical impedance spectroscopy in combination with a high temperature crystal microbalance
in Journal of Power Sources
Bharath V
(2017)
Alkaline anion exchange membrane degradation as a function of humidity measured using the quartz crystal microbalance
in International Journal of Hydrogen Energy
Meyer Q
(2015)
Combined current and temperature mapping in an air-cooled, open-cathode polymer electrolyte fuel cell under steady-state and dynamic conditions
in Journal of Power Sources
Meyer Q
(2014)
Dead-ended anode polymer electrolyte fuel cell stack operation investigated using electrochemical impedance spectroscopy, off-gas analysis and thermal imaging
in Journal of Power Sources
Ang S
(2012)
Design of fuel-cell micro-cogeneration systems through modeling and optimization
in WIREs Energy and Environment
Robinson J
(2015)
Detection of Internal Defects in Lithium-Ion Batteries Using Lock-in Thermography
in ECS Electrochemistry Letters
Description | So far this project has allowed us to develop correlative metrology techniques for the analysis of solid oxide fuel cells. This includes the ability to examine the temperature distribution in electrode materials and relate this to strain within the structure. We have also developed an in-situ SOFC cell capable of viewing, with an infrared thermal camera, the temperature distribution within an operational system. We will use these results to inform model development in the next phase of work. |
Exploitation Route | Our thermal imaging technique will provide unparalleled insight into the internal workings of SOFCs and allow advanced models describing electro-thermal operation to be developed and validated, so leading to the development of commercial SOFC technology. |
Sectors | Energy |
URL | http://www.ucl.ac.uk/electrochemical-innovation-lab |
Description | Findings of the operation of solid oxide fuel cell materials under thermal gradients are being communicated to out industrial collaborator, Ceres Power, and we have recently applied for a Supergen H2FC Early Career Researcher award with Ceres to apply thermal imaging alongside X-ray computed tomography to help understand how electrodes function in devices. |
First Year Of Impact | 2014 |
Sector | Energy,Environment |
Impact Types | Societal,Economic |