Understanding Delamination Suppression at High Deformation Rates in Through-Thickness Reinforced Laminated Composites
Lead Research Organisation:
University of Oxford
Department Name: Engineering Science
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
People |
ORCID iD |
Nikica Petrinic (Principal Investigator) |
Publications
Thomson D
(2017)
Experimental and numerical study of strain-rate effects on the IFF fracture angle using a new efficient implementation of Puck's criterion
in Composite Structures
Thomson D
(2019)
A study on the longitudinal compression strength of fibre reinforced composites under uniaxial and off-axis loads using cross-ply laminate specimens
in Composites Part A: Applied Science and Manufacturing
Thomson D
(2018)
A Puck-based localisation plane theory for rate- and pressure-dependent constitutive modelling of unidirectional fibre-reinforced polymers
in Composite Structures
Schiffer A
(2015)
The response of circular composite plates to underwater blast: Experiments and modelling
in Journal of Fluids and Structures
Quino G
(2020)
Speckle patterns for DIC in challenging scenarios: rapid application and impact endurance
in Measurement Science and Technology
Pellegrino A
(2015)
The mechanical response of a syntactic polyurethane foam at low and high rates of strain
in International Journal of Impact Engineering
Pathan M
(2018)
Experimental characterisation of rate-dependent compression behaviour of fibre reinforced composites
in EPJ Web of Conferences
Montanari M
(2018)
OpenGJK for C, C# and Matlab: Reliable solutions to distance queries between convex bodies in three-dimensional space
in SoftwareX
Martínez-Hergueta F
(2019)
Modelling the in-plane strain rate dependent behaviour of woven composites with special emphasis on the non-linear shear response
in Composite Structures
Lißner M
(2018)
A rate dependent experimental and numerical analysis of adhesive joints under different loading directions
in The European Physical Journal Special Topics
Description | Interesting new experimental evidence on the rate dependent behaviour of through thickness reinforced laminated composites is emerging. This evidence is essential in providing the designers with critically important information absence of which could adversely affect the design. |
Exploitation Route | Comparison against experimental results generated by other researchers. Input into procedures for calibration of models for simulation of delamination and its suppression via through-thickness reinforcement adopted or developed by other researchers. Exploitation of previously developed methodologies and capabilities in current and future projects where improvements are sought. |
Sectors | Aerospace, Defence and Marine,Education,Environment,Manufacturing, including Industrial Biotechology,Transport |
Description | The generated (at Oxford's Impact Engineering Laboratory) experimental data has been (and continues to be) used to support the development of macroscopic cohesive models for simulation of through-thickness reinforced laminated composites. These models are already been used to explore the limits in the design of new generation of hybrid fan blades for large civil aviation gas turbine engines designed and manufactured by Rolls-Royce. Three subsequent projects funded by Innovate UK as a part of ATI programme have involved the researchers and equipment developed during this project. This has yielded methodologies and capabilities which are in the process of being broadened to smaller length scales and uplifted to Technology Readiness Level 6 and are as such being intensively utilised by our industrial colleagues at Rolls-Royce plc. |
First Year Of Impact | 2017 |
Sector | Aerospace, Defence and Marine,Digital/Communication/Information Technologies (including Software),Education,Environment,Manufacturing, including Industrial Biotechology,Transport |
Impact Types | Societal,Economic |
Description | The research findings have encouraged the manufacturers to use more composite materials as the research showed their ability to resist impact loading if the through thickness reinforcement was designed appropriately |
Geographic Reach | Multiple continents/international |
Policy Influence Type | Participation in a guidance/advisory committee |
Impact | The new design capability has resulted in the choice of materials fro more sustainable design and greater economic benefit, whilst protecting the environment. |
Description | Cornerstone: Mechanical Engineering Science to Enable Aero Propulsion Futures |
Amount | £6,143,615 (GBP) |
Funding ID | EP/R004951/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 11/2017 |
End | 04/2023 |
Description | Defending Engine against ICE impact in the compressor |
Amount | £6,900,000 (GBP) |
Organisation | University of Oxford |
Sector | Academic/University |
Country | United Kingdom |
Start | 02/2018 |
End | 06/2023 |
Description | Design of Engineered Lightweight Innovative Casings for Engines (DELICE) |
Amount | £5,000,000 (GBP) |
Funding ID | Innovate UK ref. 113106 |
Organisation | University of Oxford |
Sector | Academic/University |
Country | United Kingdom |
Start | 12/2016 |
End | 09/2021 |
Description | EPSRC - Responsive Mode |
Amount | £300,000 (GBP) |
Funding ID | EP/M015319/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 04/2015 |
End | 03/2017 |
Description | FAN Design And INtegrity, GO (FANDANGO), Innovate UK ref.no. 113232 |
Amount | £16,900,000 (GBP) |
Organisation | University of Oxford |
Sector | Academic/University |
Country | United Kingdom |
Start | 01/2020 |
End | 12/2024 |
Description | FAN Testing And STatistical Integrity CALibration (FANTASTICAL), Innovate UK reflno. 113190 |
Amount | £13,700,000 (GBP) |
Organisation | University of Oxford |
Sector | Academic/University |
Country | United Kingdom |
Start | 11/2018 |
End | 10/2023 |
Title | High-speed digital metrology |
Description | The ability to use multiple high-speed digital cameras has yielded the development of DIC based algorithm for tracking of selected markers in 3D for displacement/velocity and strain measurements. The algorithm takes care of physical and digital noise by scale separation and motion blur by custom edge detection thus providing more accurate data for validation of newly developed simulation models. |
Type Of Material | Improvements to research infrastructure |
Year Produced | 2015 |
Provided To Others? | No |
Impact | Ability to quantify experimental observations beyond previously known limits. |
Description | Follow up investigation |
Organisation | Frazer-Nash Consultancy |
Country | United Kingdom |
Sector | Private |
PI Contribution | The discussions on the collaboration in support of the development of the next generation of submarines are taking place whereby the research at the University of Oxford will be complemented by the work at Frazer-Nash Consultancy in order to provide Rolls-Royce with continuing support beyond the 'life expectancy' of a typical research student or postdoctoral researcher placed at the university. The topics discussed to-date are directly related to the previous and current research into the applications of composite materials in submarine structures. |
Collaborator Contribution | Rolls-Royce provided material in support of research into rate dependent properties of glass, reinforced polymer matrix composites, currently investigated at Oxford. |
Impact | Journal publications are planned (drafts are ready) to publicise the findings of experimental investigation of rate dependent behaviour of composites hygroscopically aged/preconditioned. |
Start Year | 2015 |
Description | Follow up investigation |
Organisation | Rolls Royce Group Plc |
Department | Rolls Royce Submarines |
Country | United Kingdom |
Sector | Private |
PI Contribution | The discussions on the collaboration in support of the development of the next generation of submarines are taking place whereby the research at the University of Oxford will be complemented by the work at Frazer-Nash Consultancy in order to provide Rolls-Royce with continuing support beyond the 'life expectancy' of a typical research student or postdoctoral researcher placed at the university. The topics discussed to-date are directly related to the previous and current research into the applications of composite materials in submarine structures. |
Collaborator Contribution | Rolls-Royce provided material in support of research into rate dependent properties of glass, reinforced polymer matrix composites, currently investigated at Oxford. |
Impact | Journal publications are planned (drafts are ready) to publicise the findings of experimental investigation of rate dependent behaviour of composites hygroscopically aged/preconditioned. |
Start Year | 2015 |
Title | Software modules for incorporation into larger commercial software packages |
Description | Many modules have been developed during the course of the project and related parallel activities, compatible with large commercially available software packages for engineering design. These modules have been uniquely contracted and verified against analytical solutions, as well as calibrated and validated against a whole range of experiments particularly designed to represent the in-service conditions which prompted the research. |
Type Of Technology | Software |
Year Produced | 2016 |
Impact | The engineers, members of our industrial collaborators, have been able to design components and structures capable of withstanding the impact loading previously not achieved. |
Description | Attendance of international conferences on mechanics of composite materials |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | The new manufacturing method investigated by the project, has yielded several novel experimental and modelling methodologies related to through thickness reinforcement of laminated composite materials. This has been reported by the project consortium at practically all relevant international conferences on composite materials since 2015. |
Year(s) Of Engagement Activity | 2016,2017 |