AGATA Interim Funding

Lead Research Organisation: University of York
Department Name: Physics

Abstract

See Submission ST/T000546/1: AGATA: Precision Spectroscopy of Exotic Nuclei

Planned Impact

See Submission ST/T000546/1: AGATA: Precision Spectroscopy of Exotic Nuclei

Publications

10 25 50

publication icon
Ballan M (2023) Nuclear physics midterm plan at Legnaro National Laboratories (LNL) in The European Physical Journal Plus

publication icon
Bentley M (2023) Agata: in-beam spectroscopy with relativistic beams in The European Physical Journal A

publication icon
Bracco A (2023) Preface of AGATA: advancements in science and technology in The European Physical Journal A

publication icon
Clément E (2023) Organisation of the AGATA collaboration and physics campaigns in The European Physical Journal A

publication icon
Clément E (2023) Spectroscopic quadrupole moments in Xe 124 in Physical Review C

publication icon
Collado J (2023) AGATA phase 2 advancements in front-end electronics in The European Physical Journal A

publication icon
Crespi F (2023) AGATA: performance of $$\gamma $$-ray tracking and associated algorithms in The European Physical Journal A

publication icon
Girard-Alcindor V (2022) New narrow resonances observed in the unbound nucleus F 15 in Physical Review C

publication icon
Korten W (2020) Physics opportunities with the Advanced Gamma Tracking Array: AGATA in The European Physical Journal A

publication icon
Labiche M (2023) Simulation of the AGATA spectrometer and coupling with ancillary detectors in The European Physical Journal A

publication icon
Ljungvall J (2020) Performance of the Advanced GAmma Tracking Array at GANIL in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

publication icon
Simpson J (2023) The AGATA Spectrometer in Journal of Physics: Conference Series

publication icon
Smith R (2023) AGATA: mechanics and infrastructures in The European Physical Journal A

 
Description AGATA: Precision Spectroscopy of Exotic Nuclei
Amount £756,121 (GBP)
Funding ID ST/T000546/1 
Organisation Science and Technologies Facilities Council (STFC) 
Sector Public
Country United Kingdom
Start 04/2020 
End 03/2024
 
Description UK AGATA Collaboration 
Organisation Daresbury Laboratory
Country United Kingdom 
Sector Private 
PI Contribution Bentley is leading the UK AGATA STFC-funded project. Part of the AGATA project is the preparation of the AGATA phase at FAIR, part of HISPEC. This was one of the three major components of the UK NUSTAR project. Bentley has co-ordinated the collaboration, including the scientific and technical direction of the FAIR part of the AGATA project. The project will contribute to the mechanics, electronics, pulse-shape analysis and simulations for AGATA as part of the NUSTAR project.
Collaborator Contribution Partners are contributing science direction, and technical expertise to the project. The project will contribute to the mechanical design and construction, electronics and data acquisition, pulse-shape analysis and physics simulations for AGATA as part of the NUSTAR project.
Impact Full grant award from STFC 2019-2024
Start Year 2017
 
Description UK AGATA Collaboration 
Organisation University of Liverpool
Country United Kingdom 
Sector Academic/University 
PI Contribution Bentley is leading the UK AGATA STFC-funded project. Part of the AGATA project is the preparation of the AGATA phase at FAIR, part of HISPEC. This was one of the three major components of the UK NUSTAR project. Bentley has co-ordinated the collaboration, including the scientific and technical direction of the FAIR part of the AGATA project. The project will contribute to the mechanics, electronics, pulse-shape analysis and simulations for AGATA as part of the NUSTAR project.
Collaborator Contribution Partners are contributing science direction, and technical expertise to the project. The project will contribute to the mechanical design and construction, electronics and data acquisition, pulse-shape analysis and physics simulations for AGATA as part of the NUSTAR project.
Impact Full grant award from STFC 2019-2024
Start Year 2017
 
Description UK AGATA Collaboration 
Organisation University of the West of Scotland
Country United Kingdom 
Sector Academic/University 
PI Contribution Bentley is leading the UK AGATA STFC-funded project. Part of the AGATA project is the preparation of the AGATA phase at FAIR, part of HISPEC. This was one of the three major components of the UK NUSTAR project. Bentley has co-ordinated the collaboration, including the scientific and technical direction of the FAIR part of the AGATA project. The project will contribute to the mechanics, electronics, pulse-shape analysis and simulations for AGATA as part of the NUSTAR project.
Collaborator Contribution Partners are contributing science direction, and technical expertise to the project. The project will contribute to the mechanical design and construction, electronics and data acquisition, pulse-shape analysis and physics simulations for AGATA as part of the NUSTAR project.
Impact Full grant award from STFC 2019-2024
Start Year 2017
 
Description UK-NUSTAR 
Organisation Daresbury Laboratory
Department Nuclear Physics Support Group
Country United Kingdom 
Sector Academic/University 
PI Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany. Yorks contribution has been to construct and test the LYCCA device, including time-of-flight detectors, state of the art ASIC-based electronics systems and associated mechanical and electronic engineering.
Collaborator Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany.
Impact Construction of equipment for NUSTAR
Start Year 2009
 
Description UK-NUSTAR 
Organisation University of Birmingham
Department School of Physics and Astronomy
Country United Kingdom 
Sector Academic/University 
PI Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany. Yorks contribution has been to construct and test the LYCCA device, including time-of-flight detectors, state of the art ASIC-based electronics systems and associated mechanical and electronic engineering.
Collaborator Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany.
Impact Construction of equipment for NUSTAR
Start Year 2009
 
Description UK-NUSTAR 
Organisation University of Brighton
Country United Kingdom 
Sector Academic/University 
PI Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany. Yorks contribution has been to construct and test the LYCCA device, including time-of-flight detectors, state of the art ASIC-based electronics systems and associated mechanical and electronic engineering.
Collaborator Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany.
Impact Construction of equipment for NUSTAR
Start Year 2009
 
Description UK-NUSTAR 
Organisation University of Edinburgh
Department School of Physics and Astronomy
Country United Kingdom 
Sector Academic/University 
PI Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany. Yorks contribution has been to construct and test the LYCCA device, including time-of-flight detectors, state of the art ASIC-based electronics systems and associated mechanical and electronic engineering.
Collaborator Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany.
Impact Construction of equipment for NUSTAR
Start Year 2009
 
Description UK-NUSTAR 
Organisation University of Liverpool
Department Department of Physics
Country United Kingdom 
Sector Academic/University 
PI Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany. Yorks contribution has been to construct and test the LYCCA device, including time-of-flight detectors, state of the art ASIC-based electronics systems and associated mechanical and electronic engineering.
Collaborator Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany.
Impact Construction of equipment for NUSTAR
Start Year 2009
 
Description UK-NUSTAR 
Organisation University of Manchester
Country United Kingdom 
Sector Academic/University 
PI Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany. Yorks contribution has been to construct and test the LYCCA device, including time-of-flight detectors, state of the art ASIC-based electronics systems and associated mechanical and electronic engineering.
Collaborator Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany.
Impact Construction of equipment for NUSTAR
Start Year 2009
 
Description UK-NUSTAR 
Organisation University of Surrey
Country United Kingdom 
Sector Academic/University 
PI Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany. Yorks contribution has been to construct and test the LYCCA device, including time-of-flight detectors, state of the art ASIC-based electronics systems and associated mechanical and electronic engineering.
Collaborator Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany.
Impact Construction of equipment for NUSTAR
Start Year 2009
 
Description UK-NUSTAR 
Organisation University of the West of Scotland
Country United Kingdom 
Sector Academic/University 
PI Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany. Yorks contribution has been to construct and test the LYCCA device, including time-of-flight detectors, state of the art ASIC-based electronics systems and associated mechanical and electronic engineering.
Collaborator Contribution We all work towards constructing and exploiting equipment for NUSTAR at the FAIR facility in Darmstadt, Germany.
Impact Construction of equipment for NUSTAR
Start Year 2009