CASTECH
Lead Research Organisation:
University of Cambridge
Department Name: Chemical Engineering and Biotechnology
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Organisations
- University of Cambridge (Lead Research Organisation)
- QUEEN'S UNIVERSITY BELFAST (Project Partner)
- Robinson Brothers (United Kingdom) (Project Partner)
- Sasol Technology Research Laboratory (Project Partner)
- Borregaard (Norway) (Project Partner)
- Johnson Matthey (United Kingdom) (Project Partner)
- Forestry Commission Research Agency (Project Partner)
Publications
D'Agostino C
(2017)
Increased Affinity of Small Gold Particles for Glycerol Oxidation over Au/TiO 2 Probed by NMR Relaxation Methods
in ACS Catalysis
Robbins D
(2012)
CFD modeling of single-phase flow in a packed bed with MRI validation
in AIChE Journal
Chen X
(2020)
Hydrogenation of benzoic acid to benzyl alcohol over Pt/SnO2
in Applied Catalysis A: General
D'Agostino C
(2014)
Deactivation studies of a carbon supported AuPt nanoparticulate catalyst in the liquid-phase aerobic oxidation of 1,2-propanediol
in Catal. Sci. Technol.
Ralphs K
(2014)
Assessing the surface modifications following the mechanochemical preparation of a Ag/Al 2 O 3 selective catalytic reduction catalyst
in Catal. Sci. Technol.
D'Agostino C
(2016)
Solvent inhibition in the liquid-phase catalytic oxidation of 1,4-butanediol: understanding the catalyst behaviour from NMR relaxation time measurements
in Catalysis Science & Technology
Gladden L
(2010)
MRI: Operando measurements of temperature, hydrodynamics and local reaction rate in a heterogeneous catalytic reactor
in Catalysis Today
Roberts S
(2013)
Operando magnetic resonance: monitoring the evolution of conversion and product distribution during the heterogeneous catalytic ethene oligomerisation reaction
in Chemical Communications
Wu Y
(2014)
In situ study of reaction kinetics using compressed sensing NMR.
in Chemical communications (Cambridge, England)
Holland D
(2012)
Bubble size measurement using Bayesian magnetic resonance
in Chemical Engineering Science
Youngs T
(2011)
Neutron diffraction, NMR and molecular dynamics study of glucose dissolved in the ionic liquid 1-ethyl-3-methylimidazolium acetate
in Chemical Science
Youngs T
(2013)
Probing chemistry and kinetics of reactions in heterogeneous catalysts
in Chemical Science
D'Agostino C
(2013)
Solvent effect and reactivity trend in the aerobic oxidation of 1,3-propanediols over gold supported on titania: NMR diffusion and relaxation studies.
in Chemistry (Weinheim an der Bergstrasse, Germany)
D'Agostino C
(2014)
Interpretation of NMR relaxation as a tool for characterising the adsorption strength of liquids inside porous materials.
in Chemistry (Weinheim an der Bergstrasse, Germany)
Robbins D
(2013)
Development of accurate, robust liquid equations of state for multi-phase CFD simulations with a modified AUSM+-up scheme
in Computers & Fluids
Gladden L
(2013)
Magnetic resonance in reaction engineering: beyond spectroscopy
in Current Opinion in Chemical Engineering
McManus I
(2016)
Selective hydrogenation of halogenated arenes using porous manganese oxide (OMS-2) and platinum supported OMS-2 catalysts
in Faraday Discussions
McManus I
(2015)
Effect of solvent on the hydrogenation of 4-phenyl-2-butanone over Pt based catalysts
in Journal of Catalysis
Akpa B
(2012)
Solvent effects in the hydrogenation of 2-butanone
in Journal of Catalysis
Wilkinson S
(2015)
A kinetic analysis methodology to elucidate the roles of metal, support and solvent for the hydrogenation of 4-phenyl-2-butanone over Pt/TiO2
in Journal of Catalysis
Rozmyslowicz B
(2015)
Selective hydrogenation of fatty acids to alcohols over highly dispersed ReO /TiO2 catalyst
in Journal of Catalysis
D'Agostino C
(2018)
Inhibitory effect of oxygenated heterocyclic compounds in mesoporous catalytic materials: A pulsed-field gradient NMR diffusion study
in Microporous and Mesoporous Materials
Gladden L
(2011)
Measuring adsorption, diffusion and flow in chemical engineering: applications of magnetic resonance to porous media
in New Journal of Physics
Vecino PA
(2015)
Determining adsorbate configuration on alumina surfaces with (13)C nuclear magnetic resonance relaxation time analysis.
in Physical chemistry chemical physics : PCCP
Description | There were 3 main project outputs from Cambridge in this collaborative project. (1) The development of T1-T2 magnetic resonance relaxation time measurements to characterise liquid phase adsorption processes in situ in catalytic systems (2) the development of an in situ catalytic reactor which could sit inside a superconducting magnet. Funding from other grants was used to supplement funding from the CASTech project to achieve this. The reactor can reach a temperature of 350 C and 30 bar. (3) The development of robust CFD simulation codes to predict air-water and air-hydrocarbon simulations in fixed-bed reactors. A single-phase flow code was also validated against MRI data. |
Exploitation Route | The industrial collaborator on this project is exploring ways of taking the relaxometry methods in-house. Further details are available from JM. We are working closely with a number of industrial partners to use the in situ reactor and relaxometry techniques to study heterogeneous catalytic processes. 4 companies are now sponsoring work associated with the in situ reactor capability. |
Sectors | Chemicals |
Description | The magnetic resonance relaxometry methods developed in this project now provide a robust screening tool for solvent selection and materials selection in catalysis. This was demonstrated in a satellite project (totally funded by industry) on a particular catalytic conversion. Added in 2019: The NMR relaxometry method developed in this project is now used widely by other researchers and as a screening and characterisation tool for molecule-surface interactions in many academic and industrial laboratories. |
First Year Of Impact | 2016 |
Sector | Chemicals |
Impact Types | Economic |