Towards Self-scrubbing Stable and Scalable Perovskite Solar Cells
Lead Research Organisation:
Imperial College London
Department Name: Chemistry
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Organisations
Publications
Aziz A
(2019)
Understanding the Enhanced Stability of Bromide Substitution in Lead Iodide Perovskites
in Chemistry of Materials
Calado P
(2021)
Ionic screening in perovskite p-n homojunctions
in Nature Energy
Calado P
(2022)
Driftfusion: an open source code for simulating ordered semiconductor devices with mixed ionic-electronic conducting materials in one dimension
in Journal of Computational Electronics
Calado P
(2019)
Identifying Dominant Recombination Mechanisms in Perovskite Solar Cells by Measuring the Transient Ideality Factor
in Physical Review Applied
Ding D
(2021)
Ultrathin polymethylmethacrylate interlayers boost performance of hybrid tin halide perovskite solar cells.
in Chemical communications (Cambridge, England)
Du T
(2018)
Elucidating the Origins of Subgap Tail States and Open-Circuit Voltage in Methylammonium Lead Triiodide Perovskite Solar Cells
in Advanced Functional Materials
Hu Y
(2018)
Identifying and controlling phase purity in 2D hybrid perovskite thin films
in Journal of Materials Chemistry A
Lanzetta L
(2021)
Degradation mechanism of hybrid tin-based perovskite solar cells and the critical role of tin (IV) iodide.
in Nature communications
Lanzetta L
(2022)
Halide Chemistry in Tin Perovskite Optoelectronics: Bottlenecks and Opportunities
in Angewandte Chemie International Edition
Lanzetta L
(2020)
Stability of Lead and Tin Halide Perovskites: The Link between Defects and Degradation.
in The journal of physical chemistry letters
Lanzetta L
(2022)
Halide Chemistry in Tin Perovskite Optoelectronics: Bottlenecks and Opportunities
in Angewandte Chemie
Macdonald TJ
(2023)
Engineering Stable Lead-Free Tin Halide Perovskite Solar Cells: Lessons from Materials Chemistry.
in Advanced materials (Deerfield Beach, Fla.)
Macdonald TJ
(2021)
Phosphorene Nanoribbon-Augmented Optoelectronics for Enhanced Hole Extraction.
in Journal of the American Chemical Society
Moia D
(2022)
Dynamics of Internal Electric Field Screening in Hybrid Perovskite Solar Cells Probed Using Electroabsorption
in Physical Review Applied
Moia D
(2019)
Ionic-to-electronic current amplification in hybrid perovskite solar cells: ionically gated transistor-interface circuit model explains hysteresis and impedance of mixed conducting devices
in Energy & Environmental Science
Mokhtar MZ
(2021)
Bioinspired scaffolds that sequester lead ions in physically damaged high efficiency perovskite solar cells.
in Chemical communications (Cambridge, England)
Rakowski R
(2022)
High Power Irradiance Dependence of Charge Species Dynamics in Hybrid Perovskites and Kinetic Evidence for Transient Vibrational Stark Effect in Formamidinium.
in Nanomaterials (Basel, Switzerland)
Rombach F
(2021)
Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells
in Energy & Environmental Science
Van Thor JJ
(2019)
Advances and opportunities in ultrafast X-ray crystallography and ultrafast structural optical crystallography of nuclear and electronic protein dynamics.
in Structural dynamics (Melville, N.Y.)
Van Thor JJ
(2019)
Coherent two-dimensional electronic and infrared crystallography.
in The Journal of chemical physics
Webb T
(2022)
A Multifaceted Ferrocene Interlayer for Highly Stable and Efficient Lithium Doped Spiro-OMeTAD-based Perovskite Solar Cells
in Advanced Energy Materials
Webb T
(2022)
A Multifaceted Ferrocene Interlayer for Highly Stable and Efficient Lithium Doped Spiro-OMeTAD-based Perovskite Solar Cells
in Advanced Energy Materials
Westbrook RJE
(2021)
2D Phase Purity Determines Charge-Transfer Yield at 3D/2D Lead Halide Perovskite Heterojunctions.
in The journal of physical chemistry letters
Description | The project falls in the area of solar energy based renewable energy technologies and photovoltaic devices. Of all the renewable energy technologies, solar energy has the greatest potential as a world power source. For this reason, solar photovoltaic, the direct conversion of sunlight to electricity, is expected to play a significant role in future electricity supply. Solar cells based on perovskite semiconductors are generating huge interest for this purpose. However, the potentially enormous impact of low-cost perovskite solar cells has not been fully realised to date because of limited stability and concerns about the use of lead. This project focussed on addressing these bottlenecks. In particular, we focussed on the development of new lead-based and lead-free perovskites of enhanced stability and minimised environmental impact. Potential release of heavy metals (e.g. lead) into the environment in the event of integrity failure of the packaged cell has been investigated by the use of a new "green" lead scavenging scaffold. Key factors determining the stability of perovskite solar cells have been established. We have also elucidated the degradation of mechanism of tin perovskite materials under ambient operation conditions paving the way to more environmentally friendly stable solar cells. |
Exploitation Route | The findings (e.g. mechanistic insights of stability / degradation pathways in tin perovskites) will help facilitate the development of a wide range of optoelectronic / electrical devices using lead-free tin perovskites - e.g. solar cells, field effect transistors, light emitting diodes etc. |
Sectors | Electronics,Energy,Environment |
Title | Driftfusion |
Description | First official release of Driftfusion. The recent application of lead-halide perovskites as an active layer material in thin film semiconductor devices including solar cells, light emitting diodes (LEDs), and memristors has motivated the development of several new drift-diffusion models that can include the effects of both mobile electronic and ionic charge carriers. Here, we present Driftfusion, a versatile simulation tool built for simulating one-dimensional ordered semiconductor devices with mixed ionic-electronic conducting layers. Driftfusion enables users to simulate devices with virtually any number of layers and with up to four charge carrier species (electrons and holes by default plus up to two ionic species). The time-dependent carrier continuity equations are fully-coupled to Poisson's equation enabling transient optoelectronic device measurement protocols to be simulated. In addition to the material parameters, users have direct access to adapt carrier transport, recombination and generation models as well as the system boundary conditions. Furthermore, a graded-interface approach circumvents the requirement for boundary conditions at material interfaces and enables interface-specific properties, such as high rates of interfacial recombination, to be introduced. |
Type Of Technology | Software |
Year Produced | 2020 |
Open Source License? | Yes |
URL | https://zenodo.org/record/3670154 |
Title | Driftfusion |
Description | First official release of Driftfusion. The recent application of lead-halide perovskites as an active layer material in thin film semiconductor devices including solar cells, light emitting diodes (LEDs), and memristors has motivated the development of several new drift-diffusion models that can include the effects of both mobile electronic and ionic charge carriers. Here, we present Driftfusion, a versatile simulation tool built for simulating one-dimensional ordered semiconductor devices with mixed ionic-electronic conducting layers. Driftfusion enables users to simulate devices with virtually any number of layers and with up to four charge carrier species (electrons and holes by default plus up to two ionic species). The time-dependent carrier continuity equations are fully-coupled to Poisson's equation enabling transient optoelectronic device measurement protocols to be simulated. In addition to the material parameters, users have direct access to adapt carrier transport, recombination and generation models as well as the system boundary conditions. Furthermore, a graded-interface approach circumvents the requirement for boundary conditions at material interfaces and enables interface-specific properties, such as high rates of interfacial recombination, to be introduced. |
Type Of Technology | Software |
Year Produced | 2020 |
Open Source License? | Yes |
URL | https://zenodo.org/record/3670155 |