A New Correlative Approach for Structure Determination & Imaging of Molecular Materials
Lead Research Organisation:
University of Nottingham
Department Name: Faculty of Engineering
Abstract
Electron microscopy (EM) is now an indispensable tool for nanoscale imaging and analysis, enabling many important discoveries across the engineering, physical and life sciences. It is widely accepted that the level of structural, chemical and dynamic information currently accessible by EM is limited by material stability under the electron beam and/or the temporal resolution of the data capture system, rather than by microscope resolution. Recently developed fast-pixelated electron cameras (EC) have created a new paradigm for the investigation of challenging molecular and e-beam sensitive materials that are generally incompatible with conventional EM environments (vacuum, ionising radiation etc.). Their stabilisation and effective analysis necessitate combinations of low-dose, high-sensitivity and ultra-fast data acquisition approaches, often combined with cryogenic stabilisation. Here, we seek to install a complementary pair of high-performance & direct-detection electron cameras (HP-EC & DD-EC) on two transmission electron microscopes (TEM: Jeol 2100Plus and 2100F), housed in the interdisciplinary Nanoscale & Microscale Research Centre (nmRC), with associated high-tilt, cryo-transfer TEM holder (HT-CTH) and scanning TEM (STEM) diffraction system control, to create a new research capability in the UK for correlated morphological & molecular dynamic investigations.
Low-dose and/or cryogenically stabilised imaging will be used for the rapid acquisition of tilt-series for the tomographic reconstruction of materials, with greatly improved information content, for investigations of hydrogels to cell/scaffold interactions. Ultra-fast, dynamic imaging will be used to observe chemical reactions in real-time, towards the development of catalysts & energy materials. This EC capability will provide also for microcrystal electron diffraction (microED) for structure determination of sub-micron sized supramolecular crystals, for energy efficient separation reactions & drug-delivery strategies; whilst removing the requirement to grow large molecular crystals to facilitate structure determination. Correlated in operando approaches will be used to investigate functionalised framework materials, with unprecedented spatial & temporal resolution, targeting gas storage and separation reactions, cell / hydrogel interactions, and next generation electronics. This equipment will also underscore recent advances in correlative, cryogenic imaging across the length scales (CLSM to FIBSEM, to OrbiSIMS & TEM), using protocols pioneered at UoN (EP/S021434/1).
In recent years, development of ultra-fast / sensitive CMOS chips has revolutionised EM, where rapid acquisition of images from beam-sensitive samples under low fluence conditions is required. Indeed, cryo-EM (2017 Nobel Prize for Chemistry) is underpinned by such ECs, enabling rapid acquisition & summation of large, low-contrast image datasets. In simple terms, a state-of-the-art HP-EC will provide for an x16 improvement in field of view (with same level of resolution), combined with x10 increase in data acquisition rate, compared to our existing detector capability (2100Plus), ideal for cryogenic, low-dose, tomographic investigations; with acquisition of data-sets for reconstruction becoming facile (a minute rather than an hour), improving productivity. The DD-EC will provide for an x4 improvement in field of view combined with x100 increase in data acquisition rate, compared to our existing detector capability (2100F), appropriate for following chemical reactions in real-time (1500 fps). When combined with automatic alignment and real-time drift-correction, this capability will accelerate the development of functionalised framework materials, characterised using microED. Accordingly, we seek to sustain and elevate a broad range of interdisciplinary materials science research programmes, benefiting EPS research communities at the UoN, the wider East Midlands and across the UK.
Low-dose and/or cryogenically stabilised imaging will be used for the rapid acquisition of tilt-series for the tomographic reconstruction of materials, with greatly improved information content, for investigations of hydrogels to cell/scaffold interactions. Ultra-fast, dynamic imaging will be used to observe chemical reactions in real-time, towards the development of catalysts & energy materials. This EC capability will provide also for microcrystal electron diffraction (microED) for structure determination of sub-micron sized supramolecular crystals, for energy efficient separation reactions & drug-delivery strategies; whilst removing the requirement to grow large molecular crystals to facilitate structure determination. Correlated in operando approaches will be used to investigate functionalised framework materials, with unprecedented spatial & temporal resolution, targeting gas storage and separation reactions, cell / hydrogel interactions, and next generation electronics. This equipment will also underscore recent advances in correlative, cryogenic imaging across the length scales (CLSM to FIBSEM, to OrbiSIMS & TEM), using protocols pioneered at UoN (EP/S021434/1).
In recent years, development of ultra-fast / sensitive CMOS chips has revolutionised EM, where rapid acquisition of images from beam-sensitive samples under low fluence conditions is required. Indeed, cryo-EM (2017 Nobel Prize for Chemistry) is underpinned by such ECs, enabling rapid acquisition & summation of large, low-contrast image datasets. In simple terms, a state-of-the-art HP-EC will provide for an x16 improvement in field of view (with same level of resolution), combined with x10 increase in data acquisition rate, compared to our existing detector capability (2100Plus), ideal for cryogenic, low-dose, tomographic investigations; with acquisition of data-sets for reconstruction becoming facile (a minute rather than an hour), improving productivity. The DD-EC will provide for an x4 improvement in field of view combined with x100 increase in data acquisition rate, compared to our existing detector capability (2100F), appropriate for following chemical reactions in real-time (1500 fps). When combined with automatic alignment and real-time drift-correction, this capability will accelerate the development of functionalised framework materials, characterised using microED. Accordingly, we seek to sustain and elevate a broad range of interdisciplinary materials science research programmes, benefiting EPS research communities at the UoN, the wider East Midlands and across the UK.
Organisations
Publications
Cardillo-Zallo I
(2024)
Atomic-Scale Time-Resolved Imaging of Krypton Dimers, Chains and Transition to a One-Dimensional Gas
in ACS Nano
LeMercier T
(2024)
Synergy of nanocrystalline carbon nitride with Cu single atom catalyst leads to selective photocatalytic reduction of CO 2 to methanol
in Sustainable Energy & Fuels
Wang H
(2023)
Fluidisable mesoporous silica composites for thermochemical energy storage
in Energy
Whitehead R
(2023)
Selective Excitation of Pd-decorated Titania Enables Consecutive C-C Couplings and Hydrogenations under Ambient Conditions
in ChemCatChem
Woodliffe J
(2023)
Rapid microwave synthesis of sustainable magnetic framework composites of UTSA-16(Zn) with Fe 3 O 4 nanoparticles for efficient CO 2 capture
in Materials Advances
Title | Art installation at the nmRC |
Description | An art competition was held within the Nanoscale and Microscale Research Centre (nmRC), targeting staff and students who utilise our EPSRC instrumentation. We received over 30 entries, with winning entries curated into an exhibition wall within the nmRC. |
Type Of Art | Artistic/Creative Exhibition |
Year Produced | 2023 |
Impact | Launch of the public outreach programme (Under the Microscope). Positive feedback from visitors on the creativity of the centre. |
URL | https://www.nottingham.ac.uk/nmrc/under-the-microscope.aspx |
Description | As the project midpoint is approached, we report that procurement, installation and commissioning of the high-performance & direct-detection electron cameras, associated high-tilt, cryo-transfer TEM holder and scanning TEM diffraction system control systems, have all been completed. The development of protocols for effective investigation of challenging molecular and e-beam sensitive materials under conditions of low dose is already providing for research outputs on previously intractable material systems, e.g. ranging from MOFs to liposomes to endohedral fullerenes, benefiting a diverse user community. To date, and illustrative and consistent with core objectives, the project has facilitated: • The development of scalable novel iron oxide loaded MOFs, to create sustainable magnetic framework composites with high absorption capacity, selectivity and recyclability, for carbon dioxide capture mediated via induction heating. (Engineering Net Zero) • The demonstration of correlative TEM, PL and ODMR to reveal the effectiveness of nitrogen vacancy spin-active defects in fluorescent nano-diamond for sensing magnetic materials, towards solid state quantum technology memory storage and molecular switching nanodevices. (Quantum Technologies) • The development of high water-adsorption mesoporous silica composites containing CaCl2-based salts, for low-temperature thermochemical energy storage applications, to decarbonise heating/cooling in buildings. (Engineering Net Zero) • The development of a versatile heterogeneous (Pd@TiO2) photocatalyst, with the triggering of consecutive photocatalytic processes under mild reaction conditions by changing illumination. (Sustainable Chemistry) |
Exploitation Route | Academic champions for each project in collaboration with their industrial / academic partners, & supported by the university Knowledge Exchange hub, will continue to progress innovations in these areas towards practical applications and commercial adoption. |
Sectors | Agriculture Food and Drink Chemicals Digital/Communication/Information Technologies (including Software) Electronics Energy Environment Healthcare Manufacturing including Industrial Biotechology Pharmaceuticals and Medical Biotechnology |
Description | Atomic scale electron-beam processing and imaging of endohedral fullerenes has provided for fundamental investigations of Kr-Kr atom interactions, constrained within nested carbon nanotubes, leading to the demonstration of a 1D gas (https://doi.org/10.1021/acsnano.3c07853). Our report on this novel state of matter has already been picked up by 30 news outlets, leading to high levels of public engagement on social media. |
First Year Of Impact | 2024 |
Sector | Education |
Impact Types | Cultural |
Description | All Things Cryo 2023 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | 11 in person and 5 online attendees of Royal Microscopical Society course on cryo microscopy, including 2 days of workshops. Attendees from UK and overseas |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.rms.org.uk/rms-event-calendar/2023-events/all-things-cryo-2023.html |
Description | Under the microscope |
Form Of Engagement Activity | Engagement focused website, blog or social media channel |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Public/other audiences |
Results and Impact | An outreach activity called 'under the microscope' has been advertised online and via social media channels from the Nanoscale and Microscale Research Centre. This utilises EPSRC funded instrumentation to take a closer look at samples provided by the general public. This has been picked up by local news coverage and will advertised on TV and radio from 13th March 2023. |
Year(s) Of Engagement Activity | 2023 |
URL | http://under-the-microscope.aspx |