ARUA CoE in Materials, Energy & Nanotechnology Research.

Lead Research Organisation: University of the Witwatersrand
Department Name: Research Office

Abstract

Under the theme of Energy, Materials Development and Nanotechnology, ARUA CoE-MEN will use materials and nanotechnology to develop energy solutions for Africa, as well as materials development for efficiency and sustainability, and also develop personnel. The main aim is to develop materials and new technologies to benefit Africa, in both infrastructure and human development, to enable global competition. There will be a range of projects around the technological use of materials, from fundamental to devices up to prototype level and application. The projects should help to identify, and later develop, new opportunities in an African context. This is necessary because often solutions from more temperate climates cannot withstand the harsher conditions in Africa (higher temperatures and humidity), and so are not suitable. This will facilitate the development of new opportunities in an African context (e.g. sustainable manufacturing, off-grid energy technologies, improved materials, and materials recycling - obtaining more useful materials, as well as removing waste), developing the people to do it, and to help Africa become more competitive. ARUA CoE-MEN will investigate barriers to upscaling and uptake of sustainable technologies in Africa. As well as improving materials, strategies for creating and encouraging new technological pathways to facilitate transitions to sustainability in emerging water and energy technologies will be explored. Improved energy security will help the economies develop, leading to more stability with jobs, facilite people to become entrepreneurs, and help to improve the welfare and the wealth of citizens in the different countries.
Some of projects target efficiency of materials and hence safety, e.g. by improving buildings and infrastructure (recent flood damage in southern Africa has shown that houses need to be more robust). Improved materials could have even larger long-term benefits on the environment, and help to improve other living conditions, e.g. improving water storage efficiency and cleanliness by combatting corrosion. The potential benefit to the African countries is improved development, improved environments and better education, for researchers and more widely, for the public, by outreach.
ARUA CoE-MEN will also try to support more part-time higher degree students, who struggle to balance work, family and their research. This is an untapped source of students, and is an opportunity to increase the skills and work more closely with industry, and possibly entrepreneurs. The benefit to the UK is the strengthening of ties with the different African countries involved, and the potential to enter into business relationships for manufacturing in the future. The hub will be at the University of the Witwatersrand, which has a long-term history of running very successful networks and groups in materials science, and also provides world-class equipment and infrastructure to be shared.

Planned Impact

Beneficiaries?
The beneficiaries from the research are firstly the researchers and their students who will work on useful and relevant projects, and extend their expertise and experience. The students will also benefit because they will be trained to undertake cutting-edge research, so that they can publish widely and grow their careers. But the programme is much wider; it seeks solutions to many problems holding Africa back, and which affect much of its population. If successful, the projects will have a wide impact across many different levels of the populations in Ghana, Kenya, Nigeria, South Africa and Uganda.

How will they benefit from this research?
The projects have high potential of succeeding, because the researchers include many different disciplines, with environmental scientists (with ecology and sustainability expertise) to help break through the implementation barriers. Sustainable electricity and water supply is very beneficial to Africa, because these depress living conditions, and unreliable electricity is also stalling economies. Lack of potable water is a huge health hazard, and there are many waterborne diseases in Africa. Making materials more efficient will help the economies, because much time and money is wasted rectifying the problems caused by unsuitable materials, or materials which have been processed incorrectly. Developing better materials and processes will help Africa become more competitive globally, giving good, exportable products, to increase income and boost the economies. Another large benefit will be from increasing recycling, which not only removes waste (a pollutant and health hazard), but also creates revenue. Recycling can improve building materials, giving safer housing. Outreach activities can show people how to improve their lives with fairly easy habits, e.g. recycling household waste to realise income, and simultaneously improving the environment, and the improved education of (even a small number) of young people will enable them to contribute to the economy.
Providing evidence of energy consumption, use and practice in local communities to national and regional policy makers will help regulation, governance and service delivery. Understanding efficiencies will benefit many stakeholders, e.g. governments, NGOs, aid agencies, and providers of energy and energy related services. The new international network will maximise opportunities to foster and share knowledge between countries: research knowledge and best practice working with non-academic partners. Active engagement with national funders throughout the project will help to ensure a sustainable legacy.
Social impacts will arise because the researchers will actively engage communities, agencies and local leaders to promote the development of appropriate energy solutions, and ensure these solutions are responsive to local needs. This will empower communities to voice their energy needs and aspirations, provide insights into local social practices and customs, facilitating the research team and local energy champions to promote responsible energy behaviour. Careful dissemination will increase knowledge and awareness of responsible energy consumption and production, impacting social practices and promoting sustainable behavior for positive environmental outcomes.

What will be done to ensure opportunities to benefit?
To ensure that people will benefit from the activities, there will be meetings with relevant stakeholders (local community, government, scientists etc.), and one part of the project is designed around meetings and implementation. This is a large part of the programme, and is totally different from the usual academic promulgation of the results in journals and conferences, which will also occur for some projects. Outreach activities will be run in the different African countries involved, and the courses given by the U. Pretoria participants will also help promulgate the project and the underlying science.

Publications

10 25 50

publication icon
Agbe H (2019) Recent advances in photoinduced catalysis for water splitting and environmental applications in Journal of Industrial and Engineering Chemistry

 
Description Over a number of different areas we are undertaking research, which all fits under the umbrella of Materials, Energy and Nanotechnology. Under materials, we are developing new materials (hence work on platinum alloys, titanium alloys), as well as the effect of different pocessing techniques, and we are developing those techniques as well as testing them: Laser Shick Peeniing. This is our largest collaboration within ARUA CoE-MEN, and involves serveral universities in the UK as well as entities in Souith Africa. The technology is being improved and tested all the time, and the aim is to move it to a higher technology readiness level. The phase diagram of the platinum-aluminium-niobium added to our knowledge of the platinumun-based alloys for high temperature use in agressive environments. Different ways of undertaking computation for materials are being developed, and materials are "tested" by computation, and the good one are then tested experiemntally.
Exploitation Route The most successful part of ARUA CoE-MEN is the laser shock peening, which already has an active consortium, even though it was severely held back by all the COVID-19 restrictions. Aleady, there are industrial partners in South Africa and universities in the UK as well as an airline manufacturer.
The knowledge of alloy development is available for other interested people - mainly researchers at this stage.
The computer codes for materials computation will be available to all (some are already).
Sectors Aerospace

Defence and Marine

Digital/Communication/Information Technologies (including Software)

Education

Energy

Manufacturing

including Industrial Biotechology

Transport

 
Description African-UK Physics Partnerships
Geographic Reach Africa 
Policy Influence Type Participation in a guidance/advisory committee
 
Description Erasmus+ Programme (ERASMUS); Call: ERASMUS-EDU-2022-CBHE-STRAND-2 - Capacity Building in the field of Higher Education: Strand 2 - Partnerships for transformation in higher education
Amount € 792,707 (EUR)
Funding ID 101083243 - SME2KE 
Organisation European Union 
Sector Public
Country European Union (EU)
Start 03/2023 
End 02/2026
 
Description Biomass and waste to energy 
Organisation University of Ghana
Country Ghana 
Sector Academic/University 
PI Contribution In the past, there were several students supervised under AMSEN at the Universities of Nairobi and Ghana, and in 2019 two papers were published by these students. We included the Universities of Nairobi and Ghana as original partners in ARUA CoE-MEN, and worked with them from the beginning, and have been looking for student funds. In the past, there were several students supervised under AMSEN at the Universities of Nairobi and Ghana, and in 2019 two papers were published by these students. We included the Universities of Nairobi and Ghana as original partners in ARUA CoE-MEN, and worked with them from the beginning, and have been looking for student funds. The Universities of the Witwatersrand, Nairobi and Ghana all contributed to the workshop at the ARUA Conference in Nairobi in November 2019. U. Nairobi and U. Ghana presented at the MINI-CONFERENCE: 19 August 2022, hosted by the African Material Research Society. Four Wits personnel (Dr Yolanda Davids, Dr Renee le Roux, Prof. Lesley Cornish and Prof. Michael Witcomb) presented at the WRITING WORKSHOP, 24-25 October 2022, Nairobi, which was hosted by Prof. George Rading, U. Nairobi, as part of the 4th Engineering Conference (EC 2022) at the University of Nairobi. The Grant Proposal Writing Workshop was held on 24 October, and was presented by Dr Yolanda Davids, Dr Renee le Roux, Dr Duncan O. Mbuge and Dr Jean Paul Obiero. The Publication Writing Workshop was given by Prof. Elly Grossman, with Prof. Lesley Cornish and Prof. Michael Witcomb, and the latter two gave one-on-one online feedback in the weeks following to those who had submitted outputs.
Collaborator Contribution The Universities of Nairobi and Ghana planned more projects and have been looking for funding for students in Africa. The Universities of Nairobi and Ghana gave Inputs to the workshop which was part of the ARUA Conference in Nairobi in November 2019. The Writing Workshop, 24-25 October 2022, Nairobi was hosted by Prof. George Rading, U. Nairobi, as part of the 4th Engineering Conference (EC 2022) at the University of Nairobi. U. Ghana have been running a campaign (which also fits under "Environmental pollution remediation materials") where they are making fuel out of plastics, and have even given demonstrations and talks on local Ghana TV. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact Publications: Several papers prior to 2020. Amaniampong P.N., Asiedu N.Y., Fletcher E., Dodoo-Arhin D., Olatunji O.J., Trinh Q.T. (2020) Conversion of Lignocellulosic Biomass to Fuels and Value-Added Chemicals Using Emerging Technologies and State-of-the-Art Density Functional Theory Simulations Approach. In:i Daramola M., Ayeni A. (eds) Valorization of Biomass to Value-Added Commodities. Green Energy and Technology. Springer, Cham pp.193-220. DOI: https://doi.org/10.1007/978-3-030-38032-8_10 Clarisa Naa Shormeh Darko, Benjamin Agyei-Tuffour, Dorcas Funmilayo Faloye, Neill Jurgens Goosen, Emmanuel Nyankson & David Dodoo-Arhin, (2022). Biomethane Production from Residual Algae Biomass (Ecklonia maxima): Effects of Inoculum Acclimatization on Yield. Waste and Biomass Valorization, vol. 13, 497-509. https://doi.org/10.1007/s12649-021-01497-9 J. A Tuah, B. Agyei-Tuffour, E. Nyankson, D. Dodoo-Arhin, M. Oteng-Preprah, Salifu T. Azeko, Ali Salifu Azeko, Oluwaseun K. Oyewole, Abu Yaya (2021). Comparative analyses of rice husk cellulose fiber and kaolin particulate reinforced thermoplastic cassava starch biocomposites using the solution casting technique. Polymer Composites, 42[7],3216-3230. DOI: https://doi.org/10.1002/pc.26052 M. Commeh, D. Dodoo-Arhin, E. Acquaye, I. N. Baah, N. K. Amoatey, J. H. Ephraim, D. O. Obada, D. Pham Minh and A. Nzihou (2020). Plastic Fuel Conversion and Characterisation: A Waste Valorization Potential for Ghana. MRS Advance 5, [26], 1349-1356. https://doi.org/10.1557/adv.2020.127. Workshop on Waste Conversion, Modelling and 3D Printing- University of Ghana, 2022.
Start Year 2019
 
Description Biomass and waste to energy 
Organisation University of Nairobi
Country Kenya 
Sector Academic/University 
PI Contribution In the past, there were several students supervised under AMSEN at the Universities of Nairobi and Ghana, and in 2019 two papers were published by these students. We included the Universities of Nairobi and Ghana as original partners in ARUA CoE-MEN, and worked with them from the beginning, and have been looking for student funds. In the past, there were several students supervised under AMSEN at the Universities of Nairobi and Ghana, and in 2019 two papers were published by these students. We included the Universities of Nairobi and Ghana as original partners in ARUA CoE-MEN, and worked with them from the beginning, and have been looking for student funds. The Universities of the Witwatersrand, Nairobi and Ghana all contributed to the workshop at the ARUA Conference in Nairobi in November 2019. U. Nairobi and U. Ghana presented at the MINI-CONFERENCE: 19 August 2022, hosted by the African Material Research Society. Four Wits personnel (Dr Yolanda Davids, Dr Renee le Roux, Prof. Lesley Cornish and Prof. Michael Witcomb) presented at the WRITING WORKSHOP, 24-25 October 2022, Nairobi, which was hosted by Prof. George Rading, U. Nairobi, as part of the 4th Engineering Conference (EC 2022) at the University of Nairobi. The Grant Proposal Writing Workshop was held on 24 October, and was presented by Dr Yolanda Davids, Dr Renee le Roux, Dr Duncan O. Mbuge and Dr Jean Paul Obiero. The Publication Writing Workshop was given by Prof. Elly Grossman, with Prof. Lesley Cornish and Prof. Michael Witcomb, and the latter two gave one-on-one online feedback in the weeks following to those who had submitted outputs.
Collaborator Contribution The Universities of Nairobi and Ghana planned more projects and have been looking for funding for students in Africa. The Universities of Nairobi and Ghana gave Inputs to the workshop which was part of the ARUA Conference in Nairobi in November 2019. The Writing Workshop, 24-25 October 2022, Nairobi was hosted by Prof. George Rading, U. Nairobi, as part of the 4th Engineering Conference (EC 2022) at the University of Nairobi. U. Ghana have been running a campaign (which also fits under "Environmental pollution remediation materials") where they are making fuel out of plastics, and have even given demonstrations and talks on local Ghana TV. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact Publications: Several papers prior to 2020. Amaniampong P.N., Asiedu N.Y., Fletcher E., Dodoo-Arhin D., Olatunji O.J., Trinh Q.T. (2020) Conversion of Lignocellulosic Biomass to Fuels and Value-Added Chemicals Using Emerging Technologies and State-of-the-Art Density Functional Theory Simulations Approach. In:i Daramola M., Ayeni A. (eds) Valorization of Biomass to Value-Added Commodities. Green Energy and Technology. Springer, Cham pp.193-220. DOI: https://doi.org/10.1007/978-3-030-38032-8_10 Clarisa Naa Shormeh Darko, Benjamin Agyei-Tuffour, Dorcas Funmilayo Faloye, Neill Jurgens Goosen, Emmanuel Nyankson & David Dodoo-Arhin, (2022). Biomethane Production from Residual Algae Biomass (Ecklonia maxima): Effects of Inoculum Acclimatization on Yield. Waste and Biomass Valorization, vol. 13, 497-509. https://doi.org/10.1007/s12649-021-01497-9 J. A Tuah, B. Agyei-Tuffour, E. Nyankson, D. Dodoo-Arhin, M. Oteng-Preprah, Salifu T. Azeko, Ali Salifu Azeko, Oluwaseun K. Oyewole, Abu Yaya (2021). Comparative analyses of rice husk cellulose fiber and kaolin particulate reinforced thermoplastic cassava starch biocomposites using the solution casting technique. Polymer Composites, 42[7],3216-3230. DOI: https://doi.org/10.1002/pc.26052 M. Commeh, D. Dodoo-Arhin, E. Acquaye, I. N. Baah, N. K. Amoatey, J. H. Ephraim, D. O. Obada, D. Pham Minh and A. Nzihou (2020). Plastic Fuel Conversion and Characterisation: A Waste Valorization Potential for Ghana. MRS Advance 5, [26], 1349-1356. https://doi.org/10.1557/adv.2020.127. Workshop on Waste Conversion, Modelling and 3D Printing- University of Ghana, 2022.
Start Year 2019
 
Description Career enhancing Videos 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution To help early career researchers in the ARUA CoE-MEN (and other early career researchers anywhere), a series of videos have been made available on different research techniques and other skills necessary for researchers, such as improving writing skills, presentations, and writing research proposals. Here "early career researcher" is a wide definition, starting with students who are undertaking research and continuing to when they are employed as researchers, scientists and engineers. More videos will be added as they are made. Dr Michael Bodunrin (Wits): Introduction to Metal Processing; Vacuum Induction Melting (Parts 1 - 3); Thermomechanical testing using a Gleeble (Parts 1 - 6). Dr Brett Freeman (Wits): Cold Gas Dynamic Spraying. Ms Kiyaasha Dyal Ukabhai (Wits): Using Thermo-Calc for phase proportions. Dr Paul den Hoed (Wits): Charpy impact testing; Hardness Testing; Metallography; Tensile testing Prof. Trevor Derry (Wits): Experimental error analysis. Prof. Lesley Cornish (Wits): Interpreting ternary isothermal sections; Interpreting ternary liquidus surface projections. Prof. Lesley Cornish (Wits): Why we need to work together; Women in Science. Dr Robin Drennan (Wits): How to write winning proposals (Parts 1 - 10). Prof. Elly Grossman (ex-Wits): The Paragraph; Punctuation; Thinking about Writing a Paper; Proofreading; The Art of Creating a "Read Me" Journal Article Title; Signposting Your Writing; Scientific Argument; Voice in Scientific Writing.
Collaborator Contribution Videos: Prof. George Rading (University of Nairobi): Fatigue Test. Nombulelo Nkosi (Stellenbosch University): Stereolithography. Nolutambo Tembu (Stellenbosch University): Fused Deposition Modelling. Prof. Angela Last (Leicester University): The geopolitical life of nanotechnology. Dr Michael Bodunrin (University of the Witwatersrand): Introduction to Metal Processing; Vacuum Induction Melting Parts 1 - 5; Thermomechanical testing using a Gleeble Parts 1 - 5 and Part 6 Looking at the Results. Dr Brett Freeman (University of the Witwatersrand): Cold Gas Dynamic Spraying. Ms Kiyaasha Dyal Ukabhai (University of the Witwatersrand): Using Thermo-Calc for phase proportions. Dr Sandy Knowles (University of Birmingham): Nuclear Materials - Current Fission; Nuclear Materials - Generation IV Fission; Nuclear Materials - Fusion; Nuclear Materials - Space Nuclear Batteries. Dr Paul den Hoed (University of the Witwatersrand): Elementary Testing Techniques: Charpy impact testing; Hardness Testing; Metallography; Tensile testing. Prof. Lesley Cornish (University of the Witwatersrand): Interpreting ternary isothermal sections; Interpreting ternary liquidus surface projections; Interpreting microstructures; Tips on Analysis; Why we need to work together; Women in Science; How NOT to write presentations and presentations Parts 1 and 2. Prof. Trevor Derry (University of the Witwatersrand): Experimental Error Analysis. Dr Robin Drennan (University of the Witwatersrand): How to write winning proposals parts 1 - 10. Prof. Elly Grossman (Private consultant): The Paragraph; Punctuation; Thinking about Writing a Paper; Proofreading; The Art of Creating a "Read Me" Journal Article Title; Signposting Your Writing; Scientific Argument; Your Voice in Scientific Writing.
Impact 44 videos available online.
Start Year 2021
 
Description Career enhancing Videos 
Organisation University of Leicester
Country United Kingdom 
Sector Academic/University 
PI Contribution To help early career researchers in the ARUA CoE-MEN (and other early career researchers anywhere), a series of videos have been made available on different research techniques and other skills necessary for researchers, such as improving writing skills, presentations, and writing research proposals. Here "early career researcher" is a wide definition, starting with students who are undertaking research and continuing to when they are employed as researchers, scientists and engineers. More videos will be added as they are made. Dr Michael Bodunrin (Wits): Introduction to Metal Processing; Vacuum Induction Melting (Parts 1 - 3); Thermomechanical testing using a Gleeble (Parts 1 - 6). Dr Brett Freeman (Wits): Cold Gas Dynamic Spraying. Ms Kiyaasha Dyal Ukabhai (Wits): Using Thermo-Calc for phase proportions. Dr Paul den Hoed (Wits): Charpy impact testing; Hardness Testing; Metallography; Tensile testing Prof. Trevor Derry (Wits): Experimental error analysis. Prof. Lesley Cornish (Wits): Interpreting ternary isothermal sections; Interpreting ternary liquidus surface projections. Prof. Lesley Cornish (Wits): Why we need to work together; Women in Science. Dr Robin Drennan (Wits): How to write winning proposals (Parts 1 - 10). Prof. Elly Grossman (ex-Wits): The Paragraph; Punctuation; Thinking about Writing a Paper; Proofreading; The Art of Creating a "Read Me" Journal Article Title; Signposting Your Writing; Scientific Argument; Voice in Scientific Writing.
Collaborator Contribution Videos: Prof. George Rading (University of Nairobi): Fatigue Test. Nombulelo Nkosi (Stellenbosch University): Stereolithography. Nolutambo Tembu (Stellenbosch University): Fused Deposition Modelling. Prof. Angela Last (Leicester University): The geopolitical life of nanotechnology. Dr Michael Bodunrin (University of the Witwatersrand): Introduction to Metal Processing; Vacuum Induction Melting Parts 1 - 5; Thermomechanical testing using a Gleeble Parts 1 - 5 and Part 6 Looking at the Results. Dr Brett Freeman (University of the Witwatersrand): Cold Gas Dynamic Spraying. Ms Kiyaasha Dyal Ukabhai (University of the Witwatersrand): Using Thermo-Calc for phase proportions. Dr Sandy Knowles (University of Birmingham): Nuclear Materials - Current Fission; Nuclear Materials - Generation IV Fission; Nuclear Materials - Fusion; Nuclear Materials - Space Nuclear Batteries. Dr Paul den Hoed (University of the Witwatersrand): Elementary Testing Techniques: Charpy impact testing; Hardness Testing; Metallography; Tensile testing. Prof. Lesley Cornish (University of the Witwatersrand): Interpreting ternary isothermal sections; Interpreting ternary liquidus surface projections; Interpreting microstructures; Tips on Analysis; Why we need to work together; Women in Science; How NOT to write presentations and presentations Parts 1 and 2. Prof. Trevor Derry (University of the Witwatersrand): Experimental Error Analysis. Dr Robin Drennan (University of the Witwatersrand): How to write winning proposals parts 1 - 10. Prof. Elly Grossman (Private consultant): The Paragraph; Punctuation; Thinking about Writing a Paper; Proofreading; The Art of Creating a "Read Me" Journal Article Title; Signposting Your Writing; Scientific Argument; Your Voice in Scientific Writing.
Impact 44 videos available online.
Start Year 2021
 
Description Career enhancing Videos 
Organisation University of Nairobi
Country Kenya 
Sector Academic/University 
PI Contribution To help early career researchers in the ARUA CoE-MEN (and other early career researchers anywhere), a series of videos have been made available on different research techniques and other skills necessary for researchers, such as improving writing skills, presentations, and writing research proposals. Here "early career researcher" is a wide definition, starting with students who are undertaking research and continuing to when they are employed as researchers, scientists and engineers. More videos will be added as they are made. Dr Michael Bodunrin (Wits): Introduction to Metal Processing; Vacuum Induction Melting (Parts 1 - 3); Thermomechanical testing using a Gleeble (Parts 1 - 6). Dr Brett Freeman (Wits): Cold Gas Dynamic Spraying. Ms Kiyaasha Dyal Ukabhai (Wits): Using Thermo-Calc for phase proportions. Dr Paul den Hoed (Wits): Charpy impact testing; Hardness Testing; Metallography; Tensile testing Prof. Trevor Derry (Wits): Experimental error analysis. Prof. Lesley Cornish (Wits): Interpreting ternary isothermal sections; Interpreting ternary liquidus surface projections. Prof. Lesley Cornish (Wits): Why we need to work together; Women in Science. Dr Robin Drennan (Wits): How to write winning proposals (Parts 1 - 10). Prof. Elly Grossman (ex-Wits): The Paragraph; Punctuation; Thinking about Writing a Paper; Proofreading; The Art of Creating a "Read Me" Journal Article Title; Signposting Your Writing; Scientific Argument; Voice in Scientific Writing.
Collaborator Contribution Videos: Prof. George Rading (University of Nairobi): Fatigue Test. Nombulelo Nkosi (Stellenbosch University): Stereolithography. Nolutambo Tembu (Stellenbosch University): Fused Deposition Modelling. Prof. Angela Last (Leicester University): The geopolitical life of nanotechnology. Dr Michael Bodunrin (University of the Witwatersrand): Introduction to Metal Processing; Vacuum Induction Melting Parts 1 - 5; Thermomechanical testing using a Gleeble Parts 1 - 5 and Part 6 Looking at the Results. Dr Brett Freeman (University of the Witwatersrand): Cold Gas Dynamic Spraying. Ms Kiyaasha Dyal Ukabhai (University of the Witwatersrand): Using Thermo-Calc for phase proportions. Dr Sandy Knowles (University of Birmingham): Nuclear Materials - Current Fission; Nuclear Materials - Generation IV Fission; Nuclear Materials - Fusion; Nuclear Materials - Space Nuclear Batteries. Dr Paul den Hoed (University of the Witwatersrand): Elementary Testing Techniques: Charpy impact testing; Hardness Testing; Metallography; Tensile testing. Prof. Lesley Cornish (University of the Witwatersrand): Interpreting ternary isothermal sections; Interpreting ternary liquidus surface projections; Interpreting microstructures; Tips on Analysis; Why we need to work together; Women in Science; How NOT to write presentations and presentations Parts 1 and 2. Prof. Trevor Derry (University of the Witwatersrand): Experimental Error Analysis. Dr Robin Drennan (University of the Witwatersrand): How to write winning proposals parts 1 - 10. Prof. Elly Grossman (Private consultant): The Paragraph; Punctuation; Thinking about Writing a Paper; Proofreading; The Art of Creating a "Read Me" Journal Article Title; Signposting Your Writing; Scientific Argument; Your Voice in Scientific Writing.
Impact 44 videos available online.
Start Year 2021
 
Description Career enhancing Videos 
Organisation University of Stellenbosch
Country South Africa 
Sector Academic/University 
PI Contribution To help early career researchers in the ARUA CoE-MEN (and other early career researchers anywhere), a series of videos have been made available on different research techniques and other skills necessary for researchers, such as improving writing skills, presentations, and writing research proposals. Here "early career researcher" is a wide definition, starting with students who are undertaking research and continuing to when they are employed as researchers, scientists and engineers. More videos will be added as they are made. Dr Michael Bodunrin (Wits): Introduction to Metal Processing; Vacuum Induction Melting (Parts 1 - 3); Thermomechanical testing using a Gleeble (Parts 1 - 6). Dr Brett Freeman (Wits): Cold Gas Dynamic Spraying. Ms Kiyaasha Dyal Ukabhai (Wits): Using Thermo-Calc for phase proportions. Dr Paul den Hoed (Wits): Charpy impact testing; Hardness Testing; Metallography; Tensile testing Prof. Trevor Derry (Wits): Experimental error analysis. Prof. Lesley Cornish (Wits): Interpreting ternary isothermal sections; Interpreting ternary liquidus surface projections. Prof. Lesley Cornish (Wits): Why we need to work together; Women in Science. Dr Robin Drennan (Wits): How to write winning proposals (Parts 1 - 10). Prof. Elly Grossman (ex-Wits): The Paragraph; Punctuation; Thinking about Writing a Paper; Proofreading; The Art of Creating a "Read Me" Journal Article Title; Signposting Your Writing; Scientific Argument; Voice in Scientific Writing.
Collaborator Contribution Videos: Prof. George Rading (University of Nairobi): Fatigue Test. Nombulelo Nkosi (Stellenbosch University): Stereolithography. Nolutambo Tembu (Stellenbosch University): Fused Deposition Modelling. Prof. Angela Last (Leicester University): The geopolitical life of nanotechnology. Dr Michael Bodunrin (University of the Witwatersrand): Introduction to Metal Processing; Vacuum Induction Melting Parts 1 - 5; Thermomechanical testing using a Gleeble Parts 1 - 5 and Part 6 Looking at the Results. Dr Brett Freeman (University of the Witwatersrand): Cold Gas Dynamic Spraying. Ms Kiyaasha Dyal Ukabhai (University of the Witwatersrand): Using Thermo-Calc for phase proportions. Dr Sandy Knowles (University of Birmingham): Nuclear Materials - Current Fission; Nuclear Materials - Generation IV Fission; Nuclear Materials - Fusion; Nuclear Materials - Space Nuclear Batteries. Dr Paul den Hoed (University of the Witwatersrand): Elementary Testing Techniques: Charpy impact testing; Hardness Testing; Metallography; Tensile testing. Prof. Lesley Cornish (University of the Witwatersrand): Interpreting ternary isothermal sections; Interpreting ternary liquidus surface projections; Interpreting microstructures; Tips on Analysis; Why we need to work together; Women in Science; How NOT to write presentations and presentations Parts 1 and 2. Prof. Trevor Derry (University of the Witwatersrand): Experimental Error Analysis. Dr Robin Drennan (University of the Witwatersrand): How to write winning proposals parts 1 - 10. Prof. Elly Grossman (Private consultant): The Paragraph; Punctuation; Thinking about Writing a Paper; Proofreading; The Art of Creating a "Read Me" Journal Article Title; Signposting Your Writing; Scientific Argument; Your Voice in Scientific Writing.
Impact 44 videos available online.
Start Year 2021
 
Description Construction and structural materials for a sustainable future 
Organisation Coventry University
Country United Kingdom 
Sector Academic/University 
PI Contribution L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were two chapters in a books which is in press (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". On 4 May 2022, Prof Cornish visited Coventry University, for a short presentation on ARUA CoE-MEN and her work on titanium-based alloys, followed by an open discussion with several researchers on potential collaboration and was given a mini-tour of the facilities. There was interest in collaboration. She met with post doc Dr Mitchell Leering, who obtained his PhD from Wits fairly recently, and who is part of Prof. Claudia Polese's (Wits) collaboration there.
Collaborator Contribution Prof. Mark Tyrer helped us connect with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volumes 20 and 21, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3, although this did not occur as the latter downgraded their activities in the appropriate area. A project was initiated at U. Nairobi to utilize quarry dust, thus removing waste and producing something useful. An attempt to get a collaboration within this project with a new academic at Wits was unsuccessful.
Impact Although the people have now left, due to cutbacks to to COVID-19, there were plans for a course on phase equilibria, and they helped to introduce us to other potential collaborators, which resulted in two book chapters published in 2021 (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, pp. 514-525. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, pp. 152-164. ISBN 978-3-932120-13-8. Natalie Bochvar, Bernard Legendre, Ortrud Kubaschewski, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Aluminium - Iron - Sulfur, Ternary Alloys. A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, Volume 21 "Selected Al-Fe-X Ternary Systems for Industrial Applications," Editors: Frank Stein and Martin Palm, ISBN 978-3-932120-51-0 © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2022, 368-380 (596). Several papers were produced by U. Nairobi, and there was an attempt to collaborate between different people at U. Nairobi and Wits. Although other collaborations were tried, we could not resuscitate the construction part of this programme.
Start Year 2019
 
Description Construction and structural materials for a sustainable future 
Organisation University of Birmingham
Country United Kingdom 
Sector Academic/University 
PI Contribution L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were two chapters in a books which is in press (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". On 4 May 2022, Prof Cornish visited Coventry University, for a short presentation on ARUA CoE-MEN and her work on titanium-based alloys, followed by an open discussion with several researchers on potential collaboration and was given a mini-tour of the facilities. There was interest in collaboration. She met with post doc Dr Mitchell Leering, who obtained his PhD from Wits fairly recently, and who is part of Prof. Claudia Polese's (Wits) collaboration there.
Collaborator Contribution Prof. Mark Tyrer helped us connect with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volumes 20 and 21, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3, although this did not occur as the latter downgraded their activities in the appropriate area. A project was initiated at U. Nairobi to utilize quarry dust, thus removing waste and producing something useful. An attempt to get a collaboration within this project with a new academic at Wits was unsuccessful.
Impact Although the people have now left, due to cutbacks to to COVID-19, there were plans for a course on phase equilibria, and they helped to introduce us to other potential collaborators, which resulted in two book chapters published in 2021 (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, pp. 514-525. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, pp. 152-164. ISBN 978-3-932120-13-8. Natalie Bochvar, Bernard Legendre, Ortrud Kubaschewski, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Aluminium - Iron - Sulfur, Ternary Alloys. A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, Volume 21 "Selected Al-Fe-X Ternary Systems for Industrial Applications," Editors: Frank Stein and Martin Palm, ISBN 978-3-932120-51-0 © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2022, 368-380 (596). Several papers were produced by U. Nairobi, and there was an attempt to collaborate between different people at U. Nairobi and Wits. Although other collaborations were tried, we could not resuscitate the construction part of this programme.
Start Year 2019
 
Description Construction and structural materials for a sustainable future 
Organisation University of Ghana
Country Ghana 
Sector Academic/University 
PI Contribution L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were two chapters in a books which is in press (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". On 4 May 2022, Prof Cornish visited Coventry University, for a short presentation on ARUA CoE-MEN and her work on titanium-based alloys, followed by an open discussion with several researchers on potential collaboration and was given a mini-tour of the facilities. There was interest in collaboration. She met with post doc Dr Mitchell Leering, who obtained his PhD from Wits fairly recently, and who is part of Prof. Claudia Polese's (Wits) collaboration there.
Collaborator Contribution Prof. Mark Tyrer helped us connect with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volumes 20 and 21, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3, although this did not occur as the latter downgraded their activities in the appropriate area. A project was initiated at U. Nairobi to utilize quarry dust, thus removing waste and producing something useful. An attempt to get a collaboration within this project with a new academic at Wits was unsuccessful.
Impact Although the people have now left, due to cutbacks to to COVID-19, there were plans for a course on phase equilibria, and they helped to introduce us to other potential collaborators, which resulted in two book chapters published in 2021 (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, pp. 514-525. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, pp. 152-164. ISBN 978-3-932120-13-8. Natalie Bochvar, Bernard Legendre, Ortrud Kubaschewski, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Aluminium - Iron - Sulfur, Ternary Alloys. A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, Volume 21 "Selected Al-Fe-X Ternary Systems for Industrial Applications," Editors: Frank Stein and Martin Palm, ISBN 978-3-932120-51-0 © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2022, 368-380 (596). Several papers were produced by U. Nairobi, and there was an attempt to collaborate between different people at U. Nairobi and Wits. Although other collaborations were tried, we could not resuscitate the construction part of this programme.
Start Year 2019
 
Description Construction and structural materials for a sustainable future 
Organisation University of Pretoria
Country South Africa 
Sector Academic/University 
PI Contribution L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were two chapters in a books which is in press (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". On 4 May 2022, Prof Cornish visited Coventry University, for a short presentation on ARUA CoE-MEN and her work on titanium-based alloys, followed by an open discussion with several researchers on potential collaboration and was given a mini-tour of the facilities. There was interest in collaboration. She met with post doc Dr Mitchell Leering, who obtained his PhD from Wits fairly recently, and who is part of Prof. Claudia Polese's (Wits) collaboration there.
Collaborator Contribution Prof. Mark Tyrer helped us connect with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volumes 20 and 21, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3, although this did not occur as the latter downgraded their activities in the appropriate area. A project was initiated at U. Nairobi to utilize quarry dust, thus removing waste and producing something useful. An attempt to get a collaboration within this project with a new academic at Wits was unsuccessful.
Impact Although the people have now left, due to cutbacks to to COVID-19, there were plans for a course on phase equilibria, and they helped to introduce us to other potential collaborators, which resulted in two book chapters published in 2021 (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, pp. 514-525. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, pp. 152-164. ISBN 978-3-932120-13-8. Natalie Bochvar, Bernard Legendre, Ortrud Kubaschewski, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Aluminium - Iron - Sulfur, Ternary Alloys. A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, Volume 21 "Selected Al-Fe-X Ternary Systems for Industrial Applications," Editors: Frank Stein and Martin Palm, ISBN 978-3-932120-51-0 © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2022, 368-380 (596). Several papers were produced by U. Nairobi, and there was an attempt to collaborate between different people at U. Nairobi and Wits. Although other collaborations were tried, we could not resuscitate the construction part of this programme.
Start Year 2019
 
Description Environmental pollution remediation materials 
Organisation Open University
Country United Kingdom 
Sector Academic/University 
PI Contribution With the University of Ghana, there has been email contacts and contributions to ARUA workshops. Attended and contributed to the ARUA Conference in Nairobi, Kenya in November 2019. Work on sensors for pollution. Organised online conferences: MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS.
Collaborator Contribution The University of Ghana has been in email contact and has given contributions to workshops, 2019. The University of Ghana attended and contributed to the ARUA Conference in Nairobi, Kenya in November 2019. The University of Ghana finished a joint paper with the University of the Witwatersrand, which is now published. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023. U. Ghana is running a successful project (also fits under "Biomass and waste to energy") where they are making fuel out of plastics, and have even given demonstrations and talks on local Ghana TV. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact Paper: DNA hybridisation sensors for product authentication and tracing: State of the art and challenge, by Gloria Hlongwane, D. Dodoo-Arhin, Daniel Wamwangi, Michael Daramola, K. Moothi and Sunny Iyuke in South African Journal of Chemical Engineering, 27 (2019) 16 - 34, authors from University of the Witwatersrand and University of Ghana. Several papers from U. Ghana: D. Dodoo-Arhin, E E. Mbu, S. K. Ntwampe, E. N. Malenga, E. Fosso-Kankeu, B. Agyei-Tuffour, E. Nyankson, A. Yaya and H. Agbe. Synthesis of Nanostructured Cupric Oxide for Visible Light Assisted Degradation of Organic Wastewater Pollutants. (2021). Cogent Engineering 8(1): 1920563. https://doi.org/10.1080/23311916.2021.1920563 David Dodoo-Arhin, Elsie Bowen-Dodoo, Benjamin Agyei-Tuffour, Emmanuel Nyankson, John. D. Obayemi, Ali A. Salifu, Abu Yaya, Henry Agbe, Winston O. Soboyejo. (2020). Modified Nanostructured Titania Photocatalysts for Aquatic Disinfection Applications. Materials today: proceedings., https://doi.org/10.1016/j.matpr.2020.07.710 D. Dodoo-Arhin, T. Asiedu, B. Agyei-Tuffour, E. Nyankson, D. Obada, J.M. Mwabora (2020). Photocatalytic degradation of Rhodamine dyes using zinc oxide nanoparticles, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.04.597 Benjamin Agyei-Tuffour, Selassie Gbogbo, David Dodoo-Arhin, Lucas N.W. Damoah, Johnson K. Efavi, Abu Yaya, Emmanuel Nyankson (2020). Photocatalytic degradation of fractionated crude oil: potential application in oil spill remediation. Cogent Engineering 7: 1744944. DOI: https://doi.org/10.1080/23311916.2020.1744944 Henry Agbe, Nadeem Raza, David Dodoo-Arhin, R Vasant Kumar, Ki-Hyun Kim (2019). A simple sensing of hazardous photo-induced superoxide anion radicals using a molecular probe in ZnO-Nanoparticles aqueous medium. Environmental Research. 176, 108424 https://doi.org/10.1016/j.envres.2019.03.062 Henry Agbe, Emmanuel Nyankson, Nadeem Raza, David Dodoo-Arhin, Aditya Chauhan, Gabriel Osei, Vasant Kumar, Ki-Hyun Kim (2019). Recent advances in photoinduced catalysis for water splitting and environmental applications. Journal of Industrial and Engineering Chemistry 72, 31-49. https://doi.org/10.1016/j.jiec.2019.01.004 Lois Damptey, Bright N. Jaato, Camila Silva Ribeiro, Silvia Varagnolo, Nicholas P. Power, Vimalnath Selvaraj, David Dodoo-Arhin, R. Vasant Kumar, Sithara P. Sreenilayam, Dermot Brabazon, Vijay Kumar Thakur and Satheesh Krishnamurthy, (2022). Surface Functionalised MXenes for Wastewater treatment - A Comprehensive Review. Global Challenges, 2100120, 1-30. https://doi.org/10.1002/gch2.202100120. Demonstration of U. Ghana's fuel made from plastic, involving the French Embassador to Ghana, 2023.
Start Year 2019
 
Description Environmental pollution remediation materials 
Organisation University of Ghana
Country Ghana 
Sector Academic/University 
PI Contribution With the University of Ghana, there has been email contacts and contributions to ARUA workshops. Attended and contributed to the ARUA Conference in Nairobi, Kenya in November 2019. Work on sensors for pollution. Organised online conferences: MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS.
Collaborator Contribution The University of Ghana has been in email contact and has given contributions to workshops, 2019. The University of Ghana attended and contributed to the ARUA Conference in Nairobi, Kenya in November 2019. The University of Ghana finished a joint paper with the University of the Witwatersrand, which is now published. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023. U. Ghana is running a successful project (also fits under "Biomass and waste to energy") where they are making fuel out of plastics, and have even given demonstrations and talks on local Ghana TV. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact Paper: DNA hybridisation sensors for product authentication and tracing: State of the art and challenge, by Gloria Hlongwane, D. Dodoo-Arhin, Daniel Wamwangi, Michael Daramola, K. Moothi and Sunny Iyuke in South African Journal of Chemical Engineering, 27 (2019) 16 - 34, authors from University of the Witwatersrand and University of Ghana. Several papers from U. Ghana: D. Dodoo-Arhin, E E. Mbu, S. K. Ntwampe, E. N. Malenga, E. Fosso-Kankeu, B. Agyei-Tuffour, E. Nyankson, A. Yaya and H. Agbe. Synthesis of Nanostructured Cupric Oxide for Visible Light Assisted Degradation of Organic Wastewater Pollutants. (2021). Cogent Engineering 8(1): 1920563. https://doi.org/10.1080/23311916.2021.1920563 David Dodoo-Arhin, Elsie Bowen-Dodoo, Benjamin Agyei-Tuffour, Emmanuel Nyankson, John. D. Obayemi, Ali A. Salifu, Abu Yaya, Henry Agbe, Winston O. Soboyejo. (2020). Modified Nanostructured Titania Photocatalysts for Aquatic Disinfection Applications. Materials today: proceedings., https://doi.org/10.1016/j.matpr.2020.07.710 D. Dodoo-Arhin, T. Asiedu, B. Agyei-Tuffour, E. Nyankson, D. Obada, J.M. Mwabora (2020). Photocatalytic degradation of Rhodamine dyes using zinc oxide nanoparticles, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.04.597 Benjamin Agyei-Tuffour, Selassie Gbogbo, David Dodoo-Arhin, Lucas N.W. Damoah, Johnson K. Efavi, Abu Yaya, Emmanuel Nyankson (2020). Photocatalytic degradation of fractionated crude oil: potential application in oil spill remediation. Cogent Engineering 7: 1744944. DOI: https://doi.org/10.1080/23311916.2020.1744944 Henry Agbe, Nadeem Raza, David Dodoo-Arhin, R Vasant Kumar, Ki-Hyun Kim (2019). A simple sensing of hazardous photo-induced superoxide anion radicals using a molecular probe in ZnO-Nanoparticles aqueous medium. Environmental Research. 176, 108424 https://doi.org/10.1016/j.envres.2019.03.062 Henry Agbe, Emmanuel Nyankson, Nadeem Raza, David Dodoo-Arhin, Aditya Chauhan, Gabriel Osei, Vasant Kumar, Ki-Hyun Kim (2019). Recent advances in photoinduced catalysis for water splitting and environmental applications. Journal of Industrial and Engineering Chemistry 72, 31-49. https://doi.org/10.1016/j.jiec.2019.01.004 Lois Damptey, Bright N. Jaato, Camila Silva Ribeiro, Silvia Varagnolo, Nicholas P. Power, Vimalnath Selvaraj, David Dodoo-Arhin, R. Vasant Kumar, Sithara P. Sreenilayam, Dermot Brabazon, Vijay Kumar Thakur and Satheesh Krishnamurthy, (2022). Surface Functionalised MXenes for Wastewater treatment - A Comprehensive Review. Global Challenges, 2100120, 1-30. https://doi.org/10.1002/gch2.202100120. Demonstration of U. Ghana's fuel made from plastic, involving the French Embassador to Ghana, 2023.
Start Year 2019
 
Description How Society is affected by materials 
Organisation University of Cape Town
Country South Africa 
Sector Academic/University 
PI Contribution This was badly held back by COVID-19, but we did continue with the African Materials Research Society (AMRS) which helped us to host the events in 2021. We organised four online conferences and several workshops where the other universities and partners contributed.in 2023 and 2023: MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS; MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS; MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS.
Collaborator Contribution This was badly held back by COVID-19. They contributed to the workshops or organised them in their own country: WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022); Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023; Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact Blog on AMRS Portal. Discussions with other entities. All the online conferences had an electronic Book of Abstracts.
Start Year 2019
 
Description How Society is affected by materials 
Organisation University of Leicester
Country United Kingdom 
Sector Academic/University 
PI Contribution This was badly held back by COVID-19, but we did continue with the African Materials Research Society (AMRS) which helped us to host the events in 2021. We organised four online conferences and several workshops where the other universities and partners contributed.in 2023 and 2023: MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS; MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS; MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS.
Collaborator Contribution This was badly held back by COVID-19. They contributed to the workshops or organised them in their own country: WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022); Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023; Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact Blog on AMRS Portal. Discussions with other entities. All the online conferences had an electronic Book of Abstracts.
Start Year 2019
 
Description How Society is affected by materials 
Organisation University of Pretoria
Country South Africa 
Sector Academic/University 
PI Contribution This was badly held back by COVID-19, but we did continue with the African Materials Research Society (AMRS) which helped us to host the events in 2021. We organised four online conferences and several workshops where the other universities and partners contributed.in 2023 and 2023: MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS; MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS; MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS.
Collaborator Contribution This was badly held back by COVID-19. They contributed to the workshops or organised them in their own country: WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022); Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023; Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact Blog on AMRS Portal. Discussions with other entities. All the online conferences had an electronic Book of Abstracts.
Start Year 2019
 
Description Improving the effectiveness and efficiency of materials 
Organisation Coventry University
Country United Kingdom 
Sector Academic/University 
PI Contribution There are a number of projects under this, some being entirely research to develop better materials and some being problem solving, which include why some materials failed. The projects include developing alloys for implants, improving materials by laser shock peening. L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were three book chapters (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". Prof. Cornish also visited Coventry University in April 2022, which helped the ongoing collaboration there and gave a presentation. She also visited Birmingham University in April 2022, giving a talk and asked for input for the videos. The Universities of Botswana and Nairobi, and the Federal University of Technology, Akure (FUTA), Nigeria are part of the group that are working on phase diagram research with Wits, and their personnel and students would have been recipients of the modelling workshop/course on alloy design using ab initio methods and/or CALPHAD (CALculation of PHAse Diagrams). The ARUA-UKRI intervention has given impetus to this work, and three papers on phase diagrams have been published or accepted recently. The phase diagram work is important because it underlies what is possible with alloy development. Prof. C. Polese has been working on laser shock peening with several universities: Coventry, Cranfield, Leicester, Mauritius and Southampton, and several students have graduated, with more in progress. MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Open day, Cold Spray Lab, Wits, 28 March 2023. MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS
Collaborator Contribution Nelson Mandela University hosts the Centre for High Resolution Transmission Microscopy (CHRTEM) which has helped characterise samples and provide training. . Cranfield University is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022). Contributed to MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS The University of Southampton is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. In the past, there were several students supervised under AMSEN, and using the impetus of ARUA CoE-MEN in 2019 a paper was finalised and published by one of these students. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed from the beginning with work on aluminium alloys. The University of Nairobi was part of the ARUA Conference in Nairobi in November 2019 and contributed (remotely) to that in Pretoria 2021. Prof. Mark Tyrer helped put us in touch with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volume 20, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3. Phase diagram work is done at the Universities of Nairobi, Botswana and FUTA (Federal University of Technology, Akure), and each has recently had a paper published on this. There are two part-time students enrolled at the University of Botswana undertaking this work, and potential students at U. Nairobi and FUTA. When travel is allowed, FUTA wants to send personnel to the Material Science International (MSI) meetings.
Impact Nelson Mandela University has contributed to at least two papers, with more pending. Cranfield University and the University of Southampton are re-planning the contributions to the work after the affects of COVID-19. One paper with the University of Nairobi; one paper jointly with the University of Botswana and the Federal University of Technology, Akure, (FUTA), Nigeria. Electronic Books of Abstracts form the online conferences. At least six papers. Student prizes: 11th African Materials Research Society Conference prize for Biomaterials, Dakar, 3rd prize, K. Dyal Ukabhai, 15th December 2022. FameLab SA 2023, Runner-up, Ayesha Osman, 21st September 2023. 8th ICLPRP, Gyeongju, South Korea, A Best Poster Award, N. Shonai, 8th ICLPRP, 22nd-27th October 2023. Although the people concerned lost their positions at Coventry University, due to cutbacks to to COVID-19, there was plans for a workshop/course on ab initio and phase equilibria, and the University of Coventry helped to introduce us to other potential collaborators, which resulted in three book chapters (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8. Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82)
Start Year 2019
 
Description Improving the effectiveness and efficiency of materials 
Organisation Cranfield University
Country United Kingdom 
Sector Academic/University 
PI Contribution There are a number of projects under this, some being entirely research to develop better materials and some being problem solving, which include why some materials failed. The projects include developing alloys for implants, improving materials by laser shock peening. L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were three book chapters (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". Prof. Cornish also visited Coventry University in April 2022, which helped the ongoing collaboration there and gave a presentation. She also visited Birmingham University in April 2022, giving a talk and asked for input for the videos. The Universities of Botswana and Nairobi, and the Federal University of Technology, Akure (FUTA), Nigeria are part of the group that are working on phase diagram research with Wits, and their personnel and students would have been recipients of the modelling workshop/course on alloy design using ab initio methods and/or CALPHAD (CALculation of PHAse Diagrams). The ARUA-UKRI intervention has given impetus to this work, and three papers on phase diagrams have been published or accepted recently. The phase diagram work is important because it underlies what is possible with alloy development. Prof. C. Polese has been working on laser shock peening with several universities: Coventry, Cranfield, Leicester, Mauritius and Southampton, and several students have graduated, with more in progress. MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Open day, Cold Spray Lab, Wits, 28 March 2023. MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS
Collaborator Contribution Nelson Mandela University hosts the Centre for High Resolution Transmission Microscopy (CHRTEM) which has helped characterise samples and provide training. . Cranfield University is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022). Contributed to MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS The University of Southampton is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. In the past, there were several students supervised under AMSEN, and using the impetus of ARUA CoE-MEN in 2019 a paper was finalised and published by one of these students. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed from the beginning with work on aluminium alloys. The University of Nairobi was part of the ARUA Conference in Nairobi in November 2019 and contributed (remotely) to that in Pretoria 2021. Prof. Mark Tyrer helped put us in touch with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volume 20, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3. Phase diagram work is done at the Universities of Nairobi, Botswana and FUTA (Federal University of Technology, Akure), and each has recently had a paper published on this. There are two part-time students enrolled at the University of Botswana undertaking this work, and potential students at U. Nairobi and FUTA. When travel is allowed, FUTA wants to send personnel to the Material Science International (MSI) meetings.
Impact Nelson Mandela University has contributed to at least two papers, with more pending. Cranfield University and the University of Southampton are re-planning the contributions to the work after the affects of COVID-19. One paper with the University of Nairobi; one paper jointly with the University of Botswana and the Federal University of Technology, Akure, (FUTA), Nigeria. Electronic Books of Abstracts form the online conferences. At least six papers. Student prizes: 11th African Materials Research Society Conference prize for Biomaterials, Dakar, 3rd prize, K. Dyal Ukabhai, 15th December 2022. FameLab SA 2023, Runner-up, Ayesha Osman, 21st September 2023. 8th ICLPRP, Gyeongju, South Korea, A Best Poster Award, N. Shonai, 8th ICLPRP, 22nd-27th October 2023. Although the people concerned lost their positions at Coventry University, due to cutbacks to to COVID-19, there was plans for a workshop/course on ab initio and phase equilibria, and the University of Coventry helped to introduce us to other potential collaborators, which resulted in three book chapters (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8. Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82)
Start Year 2019
 
Description Improving the effectiveness and efficiency of materials 
Organisation Nelson Mandela University
Country South Africa 
Sector Academic/University 
PI Contribution There are a number of projects under this, some being entirely research to develop better materials and some being problem solving, which include why some materials failed. The projects include developing alloys for implants, improving materials by laser shock peening. L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were three book chapters (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". Prof. Cornish also visited Coventry University in April 2022, which helped the ongoing collaboration there and gave a presentation. She also visited Birmingham University in April 2022, giving a talk and asked for input for the videos. The Universities of Botswana and Nairobi, and the Federal University of Technology, Akure (FUTA), Nigeria are part of the group that are working on phase diagram research with Wits, and their personnel and students would have been recipients of the modelling workshop/course on alloy design using ab initio methods and/or CALPHAD (CALculation of PHAse Diagrams). The ARUA-UKRI intervention has given impetus to this work, and three papers on phase diagrams have been published or accepted recently. The phase diagram work is important because it underlies what is possible with alloy development. Prof. C. Polese has been working on laser shock peening with several universities: Coventry, Cranfield, Leicester, Mauritius and Southampton, and several students have graduated, with more in progress. MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Open day, Cold Spray Lab, Wits, 28 March 2023. MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS
Collaborator Contribution Nelson Mandela University hosts the Centre for High Resolution Transmission Microscopy (CHRTEM) which has helped characterise samples and provide training. . Cranfield University is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022). Contributed to MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS The University of Southampton is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. In the past, there were several students supervised under AMSEN, and using the impetus of ARUA CoE-MEN in 2019 a paper was finalised and published by one of these students. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed from the beginning with work on aluminium alloys. The University of Nairobi was part of the ARUA Conference in Nairobi in November 2019 and contributed (remotely) to that in Pretoria 2021. Prof. Mark Tyrer helped put us in touch with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volume 20, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3. Phase diagram work is done at the Universities of Nairobi, Botswana and FUTA (Federal University of Technology, Akure), and each has recently had a paper published on this. There are two part-time students enrolled at the University of Botswana undertaking this work, and potential students at U. Nairobi and FUTA. When travel is allowed, FUTA wants to send personnel to the Material Science International (MSI) meetings.
Impact Nelson Mandela University has contributed to at least two papers, with more pending. Cranfield University and the University of Southampton are re-planning the contributions to the work after the affects of COVID-19. One paper with the University of Nairobi; one paper jointly with the University of Botswana and the Federal University of Technology, Akure, (FUTA), Nigeria. Electronic Books of Abstracts form the online conferences. At least six papers. Student prizes: 11th African Materials Research Society Conference prize for Biomaterials, Dakar, 3rd prize, K. Dyal Ukabhai, 15th December 2022. FameLab SA 2023, Runner-up, Ayesha Osman, 21st September 2023. 8th ICLPRP, Gyeongju, South Korea, A Best Poster Award, N. Shonai, 8th ICLPRP, 22nd-27th October 2023. Although the people concerned lost their positions at Coventry University, due to cutbacks to to COVID-19, there was plans for a workshop/course on ab initio and phase equilibria, and the University of Coventry helped to introduce us to other potential collaborators, which resulted in three book chapters (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8. Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82)
Start Year 2019
 
Description Improving the effectiveness and efficiency of materials 
Organisation University of Botswana
Country Botswana 
Sector Academic/University 
PI Contribution There are a number of projects under this, some being entirely research to develop better materials and some being problem solving, which include why some materials failed. The projects include developing alloys for implants, improving materials by laser shock peening. L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were three book chapters (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". Prof. Cornish also visited Coventry University in April 2022, which helped the ongoing collaboration there and gave a presentation. She also visited Birmingham University in April 2022, giving a talk and asked for input for the videos. The Universities of Botswana and Nairobi, and the Federal University of Technology, Akure (FUTA), Nigeria are part of the group that are working on phase diagram research with Wits, and their personnel and students would have been recipients of the modelling workshop/course on alloy design using ab initio methods and/or CALPHAD (CALculation of PHAse Diagrams). The ARUA-UKRI intervention has given impetus to this work, and three papers on phase diagrams have been published or accepted recently. The phase diagram work is important because it underlies what is possible with alloy development. Prof. C. Polese has been working on laser shock peening with several universities: Coventry, Cranfield, Leicester, Mauritius and Southampton, and several students have graduated, with more in progress. MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Open day, Cold Spray Lab, Wits, 28 March 2023. MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS
Collaborator Contribution Nelson Mandela University hosts the Centre for High Resolution Transmission Microscopy (CHRTEM) which has helped characterise samples and provide training. . Cranfield University is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022). Contributed to MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS The University of Southampton is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. In the past, there were several students supervised under AMSEN, and using the impetus of ARUA CoE-MEN in 2019 a paper was finalised and published by one of these students. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed from the beginning with work on aluminium alloys. The University of Nairobi was part of the ARUA Conference in Nairobi in November 2019 and contributed (remotely) to that in Pretoria 2021. Prof. Mark Tyrer helped put us in touch with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volume 20, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3. Phase diagram work is done at the Universities of Nairobi, Botswana and FUTA (Federal University of Technology, Akure), and each has recently had a paper published on this. There are two part-time students enrolled at the University of Botswana undertaking this work, and potential students at U. Nairobi and FUTA. When travel is allowed, FUTA wants to send personnel to the Material Science International (MSI) meetings.
Impact Nelson Mandela University has contributed to at least two papers, with more pending. Cranfield University and the University of Southampton are re-planning the contributions to the work after the affects of COVID-19. One paper with the University of Nairobi; one paper jointly with the University of Botswana and the Federal University of Technology, Akure, (FUTA), Nigeria. Electronic Books of Abstracts form the online conferences. At least six papers. Student prizes: 11th African Materials Research Society Conference prize for Biomaterials, Dakar, 3rd prize, K. Dyal Ukabhai, 15th December 2022. FameLab SA 2023, Runner-up, Ayesha Osman, 21st September 2023. 8th ICLPRP, Gyeongju, South Korea, A Best Poster Award, N. Shonai, 8th ICLPRP, 22nd-27th October 2023. Although the people concerned lost their positions at Coventry University, due to cutbacks to to COVID-19, there was plans for a workshop/course on ab initio and phase equilibria, and the University of Coventry helped to introduce us to other potential collaborators, which resulted in three book chapters (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8. Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82)
Start Year 2019
 
Description Improving the effectiveness and efficiency of materials 
Organisation University of Leicester
Country United Kingdom 
Sector Academic/University 
PI Contribution There are a number of projects under this, some being entirely research to develop better materials and some being problem solving, which include why some materials failed. The projects include developing alloys for implants, improving materials by laser shock peening. L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were three book chapters (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". Prof. Cornish also visited Coventry University in April 2022, which helped the ongoing collaboration there and gave a presentation. She also visited Birmingham University in April 2022, giving a talk and asked for input for the videos. The Universities of Botswana and Nairobi, and the Federal University of Technology, Akure (FUTA), Nigeria are part of the group that are working on phase diagram research with Wits, and their personnel and students would have been recipients of the modelling workshop/course on alloy design using ab initio methods and/or CALPHAD (CALculation of PHAse Diagrams). The ARUA-UKRI intervention has given impetus to this work, and three papers on phase diagrams have been published or accepted recently. The phase diagram work is important because it underlies what is possible with alloy development. Prof. C. Polese has been working on laser shock peening with several universities: Coventry, Cranfield, Leicester, Mauritius and Southampton, and several students have graduated, with more in progress. MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Open day, Cold Spray Lab, Wits, 28 March 2023. MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS
Collaborator Contribution Nelson Mandela University hosts the Centre for High Resolution Transmission Microscopy (CHRTEM) which has helped characterise samples and provide training. . Cranfield University is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022). Contributed to MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS The University of Southampton is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. In the past, there were several students supervised under AMSEN, and using the impetus of ARUA CoE-MEN in 2019 a paper was finalised and published by one of these students. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed from the beginning with work on aluminium alloys. The University of Nairobi was part of the ARUA Conference in Nairobi in November 2019 and contributed (remotely) to that in Pretoria 2021. Prof. Mark Tyrer helped put us in touch with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volume 20, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3. Phase diagram work is done at the Universities of Nairobi, Botswana and FUTA (Federal University of Technology, Akure), and each has recently had a paper published on this. There are two part-time students enrolled at the University of Botswana undertaking this work, and potential students at U. Nairobi and FUTA. When travel is allowed, FUTA wants to send personnel to the Material Science International (MSI) meetings.
Impact Nelson Mandela University has contributed to at least two papers, with more pending. Cranfield University and the University of Southampton are re-planning the contributions to the work after the affects of COVID-19. One paper with the University of Nairobi; one paper jointly with the University of Botswana and the Federal University of Technology, Akure, (FUTA), Nigeria. Electronic Books of Abstracts form the online conferences. At least six papers. Student prizes: 11th African Materials Research Society Conference prize for Biomaterials, Dakar, 3rd prize, K. Dyal Ukabhai, 15th December 2022. FameLab SA 2023, Runner-up, Ayesha Osman, 21st September 2023. 8th ICLPRP, Gyeongju, South Korea, A Best Poster Award, N. Shonai, 8th ICLPRP, 22nd-27th October 2023. Although the people concerned lost their positions at Coventry University, due to cutbacks to to COVID-19, there was plans for a workshop/course on ab initio and phase equilibria, and the University of Coventry helped to introduce us to other potential collaborators, which resulted in three book chapters (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8. Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82)
Start Year 2019
 
Description Improving the effectiveness and efficiency of materials 
Organisation University of Nairobi
Country Kenya 
Sector Academic/University 
PI Contribution There are a number of projects under this, some being entirely research to develop better materials and some being problem solving, which include why some materials failed. The projects include developing alloys for implants, improving materials by laser shock peening. L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were three book chapters (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". Prof. Cornish also visited Coventry University in April 2022, which helped the ongoing collaboration there and gave a presentation. She also visited Birmingham University in April 2022, giving a talk and asked for input for the videos. The Universities of Botswana and Nairobi, and the Federal University of Technology, Akure (FUTA), Nigeria are part of the group that are working on phase diagram research with Wits, and their personnel and students would have been recipients of the modelling workshop/course on alloy design using ab initio methods and/or CALPHAD (CALculation of PHAse Diagrams). The ARUA-UKRI intervention has given impetus to this work, and three papers on phase diagrams have been published or accepted recently. The phase diagram work is important because it underlies what is possible with alloy development. Prof. C. Polese has been working on laser shock peening with several universities: Coventry, Cranfield, Leicester, Mauritius and Southampton, and several students have graduated, with more in progress. MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Open day, Cold Spray Lab, Wits, 28 March 2023. MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS
Collaborator Contribution Nelson Mandela University hosts the Centre for High Resolution Transmission Microscopy (CHRTEM) which has helped characterise samples and provide training. . Cranfield University is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022). Contributed to MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS The University of Southampton is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. In the past, there were several students supervised under AMSEN, and using the impetus of ARUA CoE-MEN in 2019 a paper was finalised and published by one of these students. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed from the beginning with work on aluminium alloys. The University of Nairobi was part of the ARUA Conference in Nairobi in November 2019 and contributed (remotely) to that in Pretoria 2021. Prof. Mark Tyrer helped put us in touch with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volume 20, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3. Phase diagram work is done at the Universities of Nairobi, Botswana and FUTA (Federal University of Technology, Akure), and each has recently had a paper published on this. There are two part-time students enrolled at the University of Botswana undertaking this work, and potential students at U. Nairobi and FUTA. When travel is allowed, FUTA wants to send personnel to the Material Science International (MSI) meetings.
Impact Nelson Mandela University has contributed to at least two papers, with more pending. Cranfield University and the University of Southampton are re-planning the contributions to the work after the affects of COVID-19. One paper with the University of Nairobi; one paper jointly with the University of Botswana and the Federal University of Technology, Akure, (FUTA), Nigeria. Electronic Books of Abstracts form the online conferences. At least six papers. Student prizes: 11th African Materials Research Society Conference prize for Biomaterials, Dakar, 3rd prize, K. Dyal Ukabhai, 15th December 2022. FameLab SA 2023, Runner-up, Ayesha Osman, 21st September 2023. 8th ICLPRP, Gyeongju, South Korea, A Best Poster Award, N. Shonai, 8th ICLPRP, 22nd-27th October 2023. Although the people concerned lost their positions at Coventry University, due to cutbacks to to COVID-19, there was plans for a workshop/course on ab initio and phase equilibria, and the University of Coventry helped to introduce us to other potential collaborators, which resulted in three book chapters (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8. Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82)
Start Year 2019
 
Description Improving the effectiveness and efficiency of materials 
Organisation University of Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution There are a number of projects under this, some being entirely research to develop better materials and some being problem solving, which include why some materials failed. The projects include developing alloys for implants, improving materials by laser shock peening. L.A. Cornish visited Coventry University in February 2020, and discussed a joint course, as well as other potential collaborations. There were three book chapters (Andy Watson was author who was at Coventry). They also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". Prof. Cornish also visited Coventry University in April 2022, which helped the ongoing collaboration there and gave a presentation. She also visited Birmingham University in April 2022, giving a talk and asked for input for the videos. The Universities of Botswana and Nairobi, and the Federal University of Technology, Akure (FUTA), Nigeria are part of the group that are working on phase diagram research with Wits, and their personnel and students would have been recipients of the modelling workshop/course on alloy design using ab initio methods and/or CALPHAD (CALculation of PHAse Diagrams). The ARUA-UKRI intervention has given impetus to this work, and three papers on phase diagrams have been published or accepted recently. The phase diagram work is important because it underlies what is possible with alloy development. Prof. C. Polese has been working on laser shock peening with several universities: Coventry, Cranfield, Leicester, Mauritius and Southampton, and several students have graduated, with more in progress. MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Open day, Cold Spray Lab, Wits, 28 March 2023. MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS
Collaborator Contribution Nelson Mandela University hosts the Centre for High Resolution Transmission Microscopy (CHRTEM) which has helped characterise samples and provide training. . Cranfield University is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022). Contributed to MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS The University of Southampton is part of the group working on Laser Shock Peening. Their role is to help prepare and study samples under different conditions and also student training and exchange was planned, and this is hoped to happen in the future, once COVID-19 restrictions have been reduced. Online work is also planned. In the past, there were several students supervised under AMSEN, and using the impetus of ARUA CoE-MEN in 2019 a paper was finalised and published by one of these students. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed from the beginning with work on aluminium alloys. The University of Nairobi was part of the ARUA Conference in Nairobi in November 2019 and contributed (remotely) to that in Pretoria 2021. Prof. Mark Tyrer helped put us in touch with other potential collaborators. Prof. Andy Watson helped us become involved with the Ternary Alloy book, Volume 20, and two chapters were written, one with him. I met him in 1999 and have been collaborating with him in different ways since 2000, and it was he who introduced us to Coventry University and Prof. Mark Tyrer. Prof. Andy Watson has also encouraged us to work more with IoM3. Phase diagram work is done at the Universities of Nairobi, Botswana and FUTA (Federal University of Technology, Akure), and each has recently had a paper published on this. There are two part-time students enrolled at the University of Botswana undertaking this work, and potential students at U. Nairobi and FUTA. When travel is allowed, FUTA wants to send personnel to the Material Science International (MSI) meetings.
Impact Nelson Mandela University has contributed to at least two papers, with more pending. Cranfield University and the University of Southampton are re-planning the contributions to the work after the affects of COVID-19. One paper with the University of Nairobi; one paper jointly with the University of Botswana and the Federal University of Technology, Akure, (FUTA), Nigeria. Electronic Books of Abstracts form the online conferences. At least six papers. Student prizes: 11th African Materials Research Society Conference prize for Biomaterials, Dakar, 3rd prize, K. Dyal Ukabhai, 15th December 2022. FameLab SA 2023, Runner-up, Ayesha Osman, 21st September 2023. 8th ICLPRP, Gyeongju, South Korea, A Best Poster Award, N. Shonai, 8th ICLPRP, 22nd-27th October 2023. Although the people concerned lost their positions at Coventry University, due to cutbacks to to COVID-19, there was plans for a workshop/course on ab initio and phase equilibria, and the University of Coventry helped to introduce us to other potential collaborators, which resulted in three book chapters (Andy Watson was author who was at Coventry), and also enabled L.A. Cornish to give a talk at Sheffield University on 12 February 2020: "Titanium-based alloys with copper additions for dental applications". L.A. Cornish is still collaborating with Andy Watson: Volodymyr Ivanchenko, updated by Lesley Cornish, Kiyaasha Dyal Ukabhai and Andy Watson, Manganese - Titanium - Zirconium Ternary Phase Diagram Evaluation, Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8 Marius Hubert-Protopopescu and Hildegard Hubert, updated by Lesley Cornish and Kiyaasha Dyal Ukabhai, Aluminium - Tin - Zinc Phase Diagram Evaluation, for Ternary Alloys, Volume 20, "Selected Systems for Lead-free Soldering and Brazing Applications", Editors: Andrew Watson, Ales Kroupa; Publisher: © Materials Science International Services GmbH, D-70565 Stuttgart (Federal Republic of Germany), 2021, in press. ISBN 978-3-932120-13-8. Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82)
Start Year 2019
 
Description Recycling of waste, including carbon dioxide 
Organisation Open University
Country United Kingdom 
Sector Academic/University 
PI Contribution Work on sensors. We have had discussions with the partners on the likely projects to collaborate on, and encouraged them to engage. With the University of Nairobi, we have planned more projects and have been looking for funding for students in AfricaL two funding opportunities were identified and worked towards, but nothing was submitted as the industrial partners pulled out.
Collaborator Contribution The University of Pretoria was part of the original ARUA CoE proposal. They have come to the early workshops, and have corresponded by email. They had planned to give a course, but this was stopped by COVID-19. However, there is now a stronger leader for our ARUA CoE-MEN, and this collaboration should continue. A book chapter was written by the University of Pretoria in 2020. The University of Pretoria applied for funding for their project in 2020, but unfortunately were not successful. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed to plans from the beginning. Part of the ARUA Conference in Nairobi in November 2019.
Impact Book chapter written by the University of Pretoria. The Universities of Pretoria and Ghana gave inputs to the Workshop at the ARUA Conference in Nairobi, November 2019, and in Pretoria in November 2021 (online). MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Most contributed. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. Most contributed. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS.
Start Year 2019
 
Description Recycling of waste, including carbon dioxide 
Organisation University of Ghana
Country Ghana 
Sector Academic/University 
PI Contribution Work on sensors. We have had discussions with the partners on the likely projects to collaborate on, and encouraged them to engage. With the University of Nairobi, we have planned more projects and have been looking for funding for students in AfricaL two funding opportunities were identified and worked towards, but nothing was submitted as the industrial partners pulled out.
Collaborator Contribution The University of Pretoria was part of the original ARUA CoE proposal. They have come to the early workshops, and have corresponded by email. They had planned to give a course, but this was stopped by COVID-19. However, there is now a stronger leader for our ARUA CoE-MEN, and this collaboration should continue. A book chapter was written by the University of Pretoria in 2020. The University of Pretoria applied for funding for their project in 2020, but unfortunately were not successful. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed to plans from the beginning. Part of the ARUA Conference in Nairobi in November 2019.
Impact Book chapter written by the University of Pretoria. The Universities of Pretoria and Ghana gave inputs to the Workshop at the ARUA Conference in Nairobi, November 2019, and in Pretoria in November 2021 (online). MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Most contributed. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. Most contributed. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS.
Start Year 2019
 
Description Recycling of waste, including carbon dioxide 
Organisation University of Nairobi
Country Kenya 
Sector Academic/University 
PI Contribution Work on sensors. We have had discussions with the partners on the likely projects to collaborate on, and encouraged them to engage. With the University of Nairobi, we have planned more projects and have been looking for funding for students in AfricaL two funding opportunities were identified and worked towards, but nothing was submitted as the industrial partners pulled out.
Collaborator Contribution The University of Pretoria was part of the original ARUA CoE proposal. They have come to the early workshops, and have corresponded by email. They had planned to give a course, but this was stopped by COVID-19. However, there is now a stronger leader for our ARUA CoE-MEN, and this collaboration should continue. A book chapter was written by the University of Pretoria in 2020. The University of Pretoria applied for funding for their project in 2020, but unfortunately were not successful. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed to plans from the beginning. Part of the ARUA Conference in Nairobi in November 2019.
Impact Book chapter written by the University of Pretoria. The Universities of Pretoria and Ghana gave inputs to the Workshop at the ARUA Conference in Nairobi, November 2019, and in Pretoria in November 2021 (online). MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Most contributed. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. Most contributed. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS.
Start Year 2019
 
Description Recycling of waste, including carbon dioxide 
Organisation University of Pretoria
Country South Africa 
Sector Academic/University 
PI Contribution Work on sensors. We have had discussions with the partners on the likely projects to collaborate on, and encouraged them to engage. With the University of Nairobi, we have planned more projects and have been looking for funding for students in AfricaL two funding opportunities were identified and worked towards, but nothing was submitted as the industrial partners pulled out.
Collaborator Contribution The University of Pretoria was part of the original ARUA CoE proposal. They have come to the early workshops, and have corresponded by email. They had planned to give a course, but this was stopped by COVID-19. However, there is now a stronger leader for our ARUA CoE-MEN, and this collaboration should continue. A book chapter was written by the University of Pretoria in 2020. The University of Pretoria applied for funding for their project in 2020, but unfortunately were not successful. University of Nairobi was one of the original partners in ARUA CoE-MEN, and has contributed to plans from the beginning. Part of the ARUA Conference in Nairobi in November 2019.
Impact Book chapter written by the University of Pretoria. The Universities of Pretoria and Ghana gave inputs to the Workshop at the ARUA Conference in Nairobi, November 2019, and in Pretoria in November 2021 (online). MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. Most contributed. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. Most contributed. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS.
Start Year 2019
 
Description Research on energy materials 
Organisation University of Ghana
Country Ghana 
Sector Academic/University 
PI Contribution Planning research and finding collaborators, e.g. the Light Source for Africa. Some papers have been published by the University of the Witwatersrand. Organised online conferences: MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. Lightning Protection of Energy and Power Systems: Industrial Applications and Research Development Workshop, Sandton, South Africa, 30 - 31 May 2023. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS. Building Capacity for Sustainable Development in Materials, Energy, and Nanotechnology: 30 July - 3 August 2023.
Collaborator Contribution The University of Pretoria was part of the original application for an ARUA CoE, and have been part of the negotiations since the start. They have sent someone to all the workshops.and were part of the ARUA Conference in Nairobi in 2019. The University of Johannesburg lately came aboard the project and is dealing with computation issues. A presentation was made at the workshop at the ARUA Conference in Nairobi, November 2019. Many contributed to Building Capacity for Sustainable Development in Materials, Energy, and Nanotechnology: 30 July - 3 August 2023. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact A book chapter from the University of Pretoria. Several publications have been made jointly between the University of Johannesburg and the University of the Witwatersrand, and more are pending. Online conferences and physical or hybrid workshops.
Start Year 2019
 
Description Research on energy materials 
Organisation University of Johannesburg
Country South Africa 
Sector Academic/University 
PI Contribution Planning research and finding collaborators, e.g. the Light Source for Africa. Some papers have been published by the University of the Witwatersrand. Organised online conferences: MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. Lightning Protection of Energy and Power Systems: Industrial Applications and Research Development Workshop, Sandton, South Africa, 30 - 31 May 2023. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS. Building Capacity for Sustainable Development in Materials, Energy, and Nanotechnology: 30 July - 3 August 2023.
Collaborator Contribution The University of Pretoria was part of the original application for an ARUA CoE, and have been part of the negotiations since the start. They have sent someone to all the workshops.and were part of the ARUA Conference in Nairobi in 2019. The University of Johannesburg lately came aboard the project and is dealing with computation issues. A presentation was made at the workshop at the ARUA Conference in Nairobi, November 2019. Many contributed to Building Capacity for Sustainable Development in Materials, Energy, and Nanotechnology: 30 July - 3 August 2023. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact A book chapter from the University of Pretoria. Several publications have been made jointly between the University of Johannesburg and the University of the Witwatersrand, and more are pending. Online conferences and physical or hybrid workshops.
Start Year 2019
 
Description Research on energy materials 
Organisation University of Pretoria
Country South Africa 
Sector Academic/University 
PI Contribution Planning research and finding collaborators, e.g. the Light Source for Africa. Some papers have been published by the University of the Witwatersrand. Organised online conferences: MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. Lightning Protection of Energy and Power Systems: Industrial Applications and Research Development Workshop, Sandton, South Africa, 30 - 31 May 2023. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS. Building Capacity for Sustainable Development in Materials, Energy, and Nanotechnology: 30 July - 3 August 2023.
Collaborator Contribution The University of Pretoria was part of the original application for an ARUA CoE, and have been part of the negotiations since the start. They have sent someone to all the workshops.and were part of the ARUA Conference in Nairobi in 2019. The University of Johannesburg lately came aboard the project and is dealing with computation issues. A presentation was made at the workshop at the ARUA Conference in Nairobi, November 2019. Many contributed to Building Capacity for Sustainable Development in Materials, Energy, and Nanotechnology: 30 July - 3 August 2023. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact A book chapter from the University of Pretoria. Several publications have been made jointly between the University of Johannesburg and the University of the Witwatersrand, and more are pending. Online conferences and physical or hybrid workshops.
Start Year 2019
 
Description Research on energy materials 
Organisation University of Southampton
Department PublicPolicy@Southampton
Country United Kingdom 
Sector Academic/University 
PI Contribution Planning research and finding collaborators, e.g. the Light Source for Africa. Some papers have been published by the University of the Witwatersrand. Organised online conferences: MINI-CONFERENCE: "Materials, Energy and Nanotechnology", 19 August 2022, hosted by AMRS. MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS. Lightning Protection of Energy and Power Systems: Industrial Applications and Research Development Workshop, Sandton, South Africa, 30 - 31 May 2023. MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS. Building Capacity for Sustainable Development in Materials, Energy, and Nanotechnology: 30 July - 3 August 2023.
Collaborator Contribution The University of Pretoria was part of the original application for an ARUA CoE, and have been part of the negotiations since the start. They have sent someone to all the workshops.and were part of the ARUA Conference in Nairobi in 2019. The University of Johannesburg lately came aboard the project and is dealing with computation issues. A presentation was made at the workshop at the ARUA Conference in Nairobi, November 2019. Many contributed to Building Capacity for Sustainable Development in Materials, Energy, and Nanotechnology: 30 July - 3 August 2023. Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023. Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023.
Impact A book chapter from the University of Pretoria. Several publications have been made jointly between the University of Johannesburg and the University of the Witwatersrand, and more are pending. Online conferences and physical or hybrid workshops.
Start Year 2019
 
Description Titanium-based alloys as potential dental implants 
Organisation Nelson Mandela University
Country South Africa 
Sector Academic/University 
PI Contribution Four academics at Wits co-supervised 7 students (5 submitted and 2 ongoing) in different projects based on developing Ti-based alloys for dental implants. Several conference presentations were made and 3 papers published with the other team members, with more in draft. Three workshops were held.
Collaborator Contribution On student was supervised at Nelson Mandela University (but did not finish). Contributions from Uppsala, Nelson Mandela and Mintek to the workshops and to the papers. Sweden upplied some of the alloys. Mintek allowed the corrosion testing to be done there. AMAZEMET atomised the powders with their customised equipment.
Impact 6 postgraduate students completed, at least 4 journal papers published, at least 2 conference papers published and several potential alloys identified. Approximately R 500 000 (which is continuing) from Collaborative Programme for Additive Manufacturing (CPAM), with Prof. Claudia Polese for Engineering of Metal Additive Manufacturing for Aeronautical & Biomedical Applications. New collaboration with AMAZEMET, Poland, and the results look good. 11th African Materials Research Society Conference prize for Biomaterials, Dakar, 3rd prize, K. Dyal Ukabhai, 15th December 2022. 8th ICLPRP, Gyeongju, South Korea, A Best Poster Award, N. Shonai, 8th ICLPRP, 22nd-27th October 2023. Scoping report for 7dental alloys in South Africa.
Start Year 2019
 
Description Titanium-based alloys as potential dental implants 
Organisation Uppsala University
Country Sweden 
Sector Academic/University 
PI Contribution Four academics at Wits co-supervised 7 students (5 submitted and 2 ongoing) in different projects based on developing Ti-based alloys for dental implants. Several conference presentations were made and 3 papers published with the other team members, with more in draft. Three workshops were held.
Collaborator Contribution On student was supervised at Nelson Mandela University (but did not finish). Contributions from Uppsala, Nelson Mandela and Mintek to the workshops and to the papers. Sweden upplied some of the alloys. Mintek allowed the corrosion testing to be done there. AMAZEMET atomised the powders with their customised equipment.
Impact 6 postgraduate students completed, at least 4 journal papers published, at least 2 conference papers published and several potential alloys identified. Approximately R 500 000 (which is continuing) from Collaborative Programme for Additive Manufacturing (CPAM), with Prof. Claudia Polese for Engineering of Metal Additive Manufacturing for Aeronautical & Biomedical Applications. New collaboration with AMAZEMET, Poland, and the results look good. 11th African Materials Research Society Conference prize for Biomaterials, Dakar, 3rd prize, K. Dyal Ukabhai, 15th December 2022. 8th ICLPRP, Gyeongju, South Korea, A Best Poster Award, N. Shonai, 8th ICLPRP, 22nd-27th October 2023. Scoping report for 7dental alloys in South Africa.
Start Year 2019
 
Description Training and experience in writing 
Organisation University of Ghana
Country Ghana 
Sector Academic/University 
PI Contribution Under this part of the programme, there were workshops to help early career researchers write for both publications and also grant-writing. There were also videos made, which are described in the videos section. The writing also culminated in the Materials Science International (MSI) workshops where the early career researchers were put into small groups and were given a Phase equlibria Evaluation Reports system to prepare under the supervision of a Group Leader. This gave them experience of reading data, extracting the relevant information and writing it to a strict specification on the template. Prior to this, several early career researchers had been trained by MSI at their annual workshops, e.g., Dr Klenam in 2023 and earlier Liberty Chipise and Kiyaasha Dyal Ukabhai.
Collaborator Contribution WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022): Hybrid: Grant Proposal Writing Workshop 24 October 2022, by 4 presenters (U. Nairobi and Wits). Publication Writing Workshop, 25 October 2022 with one presenter and two helpers who critiqued the submitted work. 30 participants. MSIT Workshop, Ghana, 29 May - 2 June 2023: Physical: 6 Evaluation Reports for publication submitted to MSI by groups of 4 or 5. Experience in reading, writing and deadlines. 29 participants. MSIT Workshop, Ghana, 14 - 18 August 2023: Physical: 6 Evaluation Reports for publication submitted to MSI by groups of 4 or 5. Experience in reading, writing and deadlines. 20 participants Writing Workshop, Ghana, 21 - 25 August 2023: Physical: One lecturer, with two helpers who also read the submissions. 20 participants
Impact Outputs from MSIT (Materials Science International Team) Winter School, Schloss Ringberg, Tegernsee, Germany, 12 - 17 March 2023; Accra, Ghana, 29 May - 2 June 2023; Accra, Ghana, 14 - 18 August 2023 Published or submitted on Eureka: Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82) (published) Daniel Narh, Thomas Ochuku Mbuya, Eliakim Niva Akhusama, Christian Amoako, Maame Yaa Adomakos, Lesley Cornish, "Hf - Pd (Hafnium - Palladium)", revised and resubmitted on 10 January 2024. Benjamin Agyei-Tuffour, Emmanuel Nyankson, Beatrice Naa Ayeley Ardayfio, Edwinner Ohema Animuonyam Ayitey and Lesley Cornish, "Rh - Ru (Rhodium - Ruthenium)", revised and resubmitted on 10 January 2024. Aubin Aholouvi, Lesley Cornish, David Dodoo-Arhin, Kwame Kwakye Marfo, Phillimon Molepo, Pearline Ami Newlands, "Pd - Ru (Palladium - Ruthenium) Phase Diagram Evaluation", revised and resubmitted on 10 January 2024. Lucas Nana Wiredu Damoah, Daniel Amusah, Abdul Razak Gumah, Phillimon Molepo, Emmanuella Okyere, Lesley Cornish, "Hf - Pt (Hafnium - Platinum) Phase Diagram Evaluation", accepted on 5 January 2024. Lesley Cornish, Rhodalyn Dowuona, Solomon Felicien, Bashiru Kadiri-English, Phillimon Molepo, Bernard Odera, "Al - Pt (Aluminium - Platinum) Phase Diagram Evaluation", submitted on 1 January 2024, and under review. Chapters in Ternary Alloys. A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, Volume 22, 2023/2024, accepted: Aubin Aholouvi, Bashiru Kadiri-English, John Yirijor, Kiyaasha Dyal Ukabhai, Lesley Cornish, "Boron - Chromium - Tungsten Phase Diagram Evaluation", accepted 13 September 2023. David Dodoo-Arhin, Kiyaasha Dyal Ukabhai, Kwame Kwakye Marfo, Eric Njoroge and Andrew Tieku, "Carbon - Silicon - Tungsten Phase Diagram Evaluation", accepted October 2023. Benjamin Agyei-Tuffour, Joshua Tuah Asante, Lesley Cornish, Desmond Edem Primus Klenam, Jemima Baaba Haywood-Dadzie, "Cobalt - Nickel - Vanadium Phase Diagram Evaluation", accepted by 6 December 2023. Beatrice Ardayfio, Alfred Muchangi, Selassie Gbogbo, Michael Bodunrin, Lesley Cornish, "Molybdenum - Nickel - Tantalum Phase Diagram Evaluation", accepted 6 December 2023. Lucas Nana Wiredu Damoah, Tendai Carol Matani, Daniel Amusah, Liberty Chipise, Lesley Cornish, "Carbon - Hafnium - Tungsten", accepted by 6 December 2023. Alice Owusu Gyimah, John Ekow Ampah-Essel, Joshua Asante Tuah, Lesley Cornish, Rebecca Boamah "B - Si - V (Boron - Silicon - Vanadium)", accepted October 2023.
Start Year 2020
 
Description Training and experience in writing 
Organisation University of Nairobi
Country Kenya 
Sector Academic/University 
PI Contribution Under this part of the programme, there were workshops to help early career researchers write for both publications and also grant-writing. There were also videos made, which are described in the videos section. The writing also culminated in the Materials Science International (MSI) workshops where the early career researchers were put into small groups and were given a Phase equlibria Evaluation Reports system to prepare under the supervision of a Group Leader. This gave them experience of reading data, extracting the relevant information and writing it to a strict specification on the template. Prior to this, several early career researchers had been trained by MSI at their annual workshops, e.g., Dr Klenam in 2023 and earlier Liberty Chipise and Kiyaasha Dyal Ukabhai.
Collaborator Contribution WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022): Hybrid: Grant Proposal Writing Workshop 24 October 2022, by 4 presenters (U. Nairobi and Wits). Publication Writing Workshop, 25 October 2022 with one presenter and two helpers who critiqued the submitted work. 30 participants. MSIT Workshop, Ghana, 29 May - 2 June 2023: Physical: 6 Evaluation Reports for publication submitted to MSI by groups of 4 or 5. Experience in reading, writing and deadlines. 29 participants. MSIT Workshop, Ghana, 14 - 18 August 2023: Physical: 6 Evaluation Reports for publication submitted to MSI by groups of 4 or 5. Experience in reading, writing and deadlines. 20 participants Writing Workshop, Ghana, 21 - 25 August 2023: Physical: One lecturer, with two helpers who also read the submissions. 20 participants
Impact Outputs from MSIT (Materials Science International Team) Winter School, Schloss Ringberg, Tegernsee, Germany, 12 - 17 March 2023; Accra, Ghana, 29 May - 2 June 2023; Accra, Ghana, 14 - 18 August 2023 Published or submitted on Eureka: Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82) (published) Daniel Narh, Thomas Ochuku Mbuya, Eliakim Niva Akhusama, Christian Amoako, Maame Yaa Adomakos, Lesley Cornish, "Hf - Pd (Hafnium - Palladium)", revised and resubmitted on 10 January 2024. Benjamin Agyei-Tuffour, Emmanuel Nyankson, Beatrice Naa Ayeley Ardayfio, Edwinner Ohema Animuonyam Ayitey and Lesley Cornish, "Rh - Ru (Rhodium - Ruthenium)", revised and resubmitted on 10 January 2024. Aubin Aholouvi, Lesley Cornish, David Dodoo-Arhin, Kwame Kwakye Marfo, Phillimon Molepo, Pearline Ami Newlands, "Pd - Ru (Palladium - Ruthenium) Phase Diagram Evaluation", revised and resubmitted on 10 January 2024. Lucas Nana Wiredu Damoah, Daniel Amusah, Abdul Razak Gumah, Phillimon Molepo, Emmanuella Okyere, Lesley Cornish, "Hf - Pt (Hafnium - Platinum) Phase Diagram Evaluation", accepted on 5 January 2024. Lesley Cornish, Rhodalyn Dowuona, Solomon Felicien, Bashiru Kadiri-English, Phillimon Molepo, Bernard Odera, "Al - Pt (Aluminium - Platinum) Phase Diagram Evaluation", submitted on 1 January 2024, and under review. Chapters in Ternary Alloys. A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, Volume 22, 2023/2024, accepted: Aubin Aholouvi, Bashiru Kadiri-English, John Yirijor, Kiyaasha Dyal Ukabhai, Lesley Cornish, "Boron - Chromium - Tungsten Phase Diagram Evaluation", accepted 13 September 2023. David Dodoo-Arhin, Kiyaasha Dyal Ukabhai, Kwame Kwakye Marfo, Eric Njoroge and Andrew Tieku, "Carbon - Silicon - Tungsten Phase Diagram Evaluation", accepted October 2023. Benjamin Agyei-Tuffour, Joshua Tuah Asante, Lesley Cornish, Desmond Edem Primus Klenam, Jemima Baaba Haywood-Dadzie, "Cobalt - Nickel - Vanadium Phase Diagram Evaluation", accepted by 6 December 2023. Beatrice Ardayfio, Alfred Muchangi, Selassie Gbogbo, Michael Bodunrin, Lesley Cornish, "Molybdenum - Nickel - Tantalum Phase Diagram Evaluation", accepted 6 December 2023. Lucas Nana Wiredu Damoah, Tendai Carol Matani, Daniel Amusah, Liberty Chipise, Lesley Cornish, "Carbon - Hafnium - Tungsten", accepted by 6 December 2023. Alice Owusu Gyimah, John Ekow Ampah-Essel, Joshua Asante Tuah, Lesley Cornish, Rebecca Boamah "B - Si - V (Boron - Silicon - Vanadium)", accepted October 2023.
Start Year 2020
 
Description Training and experience in writing 
Organisation University of Pretoria
Country South Africa 
Sector Academic/University 
PI Contribution Under this part of the programme, there were workshops to help early career researchers write for both publications and also grant-writing. There were also videos made, which are described in the videos section. The writing also culminated in the Materials Science International (MSI) workshops where the early career researchers were put into small groups and were given a Phase equlibria Evaluation Reports system to prepare under the supervision of a Group Leader. This gave them experience of reading data, extracting the relevant information and writing it to a strict specification on the template. Prior to this, several early career researchers had been trained by MSI at their annual workshops, e.g., Dr Klenam in 2023 and earlier Liberty Chipise and Kiyaasha Dyal Ukabhai.
Collaborator Contribution WRITING WORKSHOP, 24-25 October 2022, hosted by U. Nairobi, as part of the 4th Engineering Conference (EC 2022): Hybrid: Grant Proposal Writing Workshop 24 October 2022, by 4 presenters (U. Nairobi and Wits). Publication Writing Workshop, 25 October 2022 with one presenter and two helpers who critiqued the submitted work. 30 participants. MSIT Workshop, Ghana, 29 May - 2 June 2023: Physical: 6 Evaluation Reports for publication submitted to MSI by groups of 4 or 5. Experience in reading, writing and deadlines. 29 participants. MSIT Workshop, Ghana, 14 - 18 August 2023: Physical: 6 Evaluation Reports for publication submitted to MSI by groups of 4 or 5. Experience in reading, writing and deadlines. 20 participants Writing Workshop, Ghana, 21 - 25 August 2023: Physical: One lecturer, with two helpers who also read the submissions. 20 participants
Impact Outputs from MSIT (Materials Science International Team) Winter School, Schloss Ringberg, Tegernsee, Germany, 12 - 17 March 2023; Accra, Ghana, 29 May - 2 June 2023; Accra, Ghana, 14 - 18 August 2023 Published or submitted on Eureka: Watson, A.; de Abreu, D.; Cornish, L.; Klenam, D., "Mo-Ti-Zr Ternary Phase Diagram Evaluation", in MSI Eureka, Watson, A. (Ed.), MSI, Materials Science International Services GmbH, Stuttgart (2023), Document ID: 10.18033.2.8, https://doi.org/10.7121/msi-eureka-10.18033.2.8 (Crys. Structure, Phase Diagram, Phase Relations, Assessment, 82) (published) Daniel Narh, Thomas Ochuku Mbuya, Eliakim Niva Akhusama, Christian Amoako, Maame Yaa Adomakos, Lesley Cornish, "Hf - Pd (Hafnium - Palladium)", revised and resubmitted on 10 January 2024. Benjamin Agyei-Tuffour, Emmanuel Nyankson, Beatrice Naa Ayeley Ardayfio, Edwinner Ohema Animuonyam Ayitey and Lesley Cornish, "Rh - Ru (Rhodium - Ruthenium)", revised and resubmitted on 10 January 2024. Aubin Aholouvi, Lesley Cornish, David Dodoo-Arhin, Kwame Kwakye Marfo, Phillimon Molepo, Pearline Ami Newlands, "Pd - Ru (Palladium - Ruthenium) Phase Diagram Evaluation", revised and resubmitted on 10 January 2024. Lucas Nana Wiredu Damoah, Daniel Amusah, Abdul Razak Gumah, Phillimon Molepo, Emmanuella Okyere, Lesley Cornish, "Hf - Pt (Hafnium - Platinum) Phase Diagram Evaluation", accepted on 5 January 2024. Lesley Cornish, Rhodalyn Dowuona, Solomon Felicien, Bashiru Kadiri-English, Phillimon Molepo, Bernard Odera, "Al - Pt (Aluminium - Platinum) Phase Diagram Evaluation", submitted on 1 January 2024, and under review. Chapters in Ternary Alloys. A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, Volume 22, 2023/2024, accepted: Aubin Aholouvi, Bashiru Kadiri-English, John Yirijor, Kiyaasha Dyal Ukabhai, Lesley Cornish, "Boron - Chromium - Tungsten Phase Diagram Evaluation", accepted 13 September 2023. David Dodoo-Arhin, Kiyaasha Dyal Ukabhai, Kwame Kwakye Marfo, Eric Njoroge and Andrew Tieku, "Carbon - Silicon - Tungsten Phase Diagram Evaluation", accepted October 2023. Benjamin Agyei-Tuffour, Joshua Tuah Asante, Lesley Cornish, Desmond Edem Primus Klenam, Jemima Baaba Haywood-Dadzie, "Cobalt - Nickel - Vanadium Phase Diagram Evaluation", accepted by 6 December 2023. Beatrice Ardayfio, Alfred Muchangi, Selassie Gbogbo, Michael Bodunrin, Lesley Cornish, "Molybdenum - Nickel - Tantalum Phase Diagram Evaluation", accepted 6 December 2023. Lucas Nana Wiredu Damoah, Tendai Carol Matani, Daniel Amusah, Liberty Chipise, Lesley Cornish, "Carbon - Hafnium - Tungsten", accepted by 6 December 2023. Alice Owusu Gyimah, John Ekow Ampah-Essel, Joshua Asante Tuah, Lesley Cornish, Rebecca Boamah "B - Si - V (Boron - Silicon - Vanadium)", accepted October 2023.
Start Year 2020
 
Description 5th Engineering Conference 2023 (EC 2023), Nairobi, 26 - 27 October 2023. 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Postgraduate students
Results and Impact Lesley A. Cornish presented: Developing titanium-based alloys with copper additions for dental applications, as an Invited Speaker for 5th Engineering Conference 2023 (EC 2023), Nairobi, 26 - 27 October 2023. It was done online.
Year(s) Of Engagement Activity 2023
 
Description AMRS-UNECA Nanotechnology Boot Camp (online), 10 - 13 August 2021 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact This was an online "bootcamp" covering nanotechnology and its uses. Prof. Cornish gave an overview of ARUA CoE-MEN, and Dr C. Freemantle (asked by Prof. Cornish) from a South African company gave a presentation on a commercial nanoproduct.
Year(s) Of Engagement Activity 2021
 
Description ARUA 2021 Biennial International Conference, 18 - 20 November 2021 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Although no abstracts were submitted to the conference, because the work being done has little relevance for the theme of "Global Public Health Challenges: Facing Them in Africa", and two projects which could have been relevant were not yet initiated, a half-day workshop, was held, discussing current collaborations and potential collaborations, e.g. Brookhaven National Laboratories, USA. Presentations were also made by: Prof. Rading (University of Nairobi); Fildah Ayaa (Makerere University, Uganda, now studying at the University of Pretoria) and Dr Samuel Chigome (President of the AMRS).
Prof. Cornish also chaired two breakaway sessions.
Year(s) Of Engagement Activity 2021
 
Description ARUA 2023 Biennial International Conference, University of Lagos, 15 - 17th November 2023 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Other audiences
Results and Impact Lesley Cornish presented: Using People to Strengthen Science and Engineering Education in Africa, at the ARUA 2023 Biennial International Conference, University of Lagos, 15 - 17th November 2023. She also submitted a full length paper, but the organisers did not find find a publisher for the proceedings, so this paper will be submitted elsewhere subsequently.
Year(s) Of Engagement Activity 2023
 
Description ARUA-Carnegie Early Career Researcher Fellowship 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Study participants or study members
Results and Impact For the first postdoc position, there were seven applicants, with two females, and most did not state that they would come to the Host University (Wits), with two applicants wanting to stay in their home universities, making them ineligible. One applicant was not from an ARUA university, which made her ineleigible. One applicant wanted to go from Wits to the University of Ghana, and was a good candidate. Another applicant wanted to go to UCT, which is not part of our network. The best candidate, Dr Joseph Nzabahimana, was from the University of Rwanda to Wits. He was hosted by Prof. Kenneth Ozoemena who also has a SARChI chair (South African Research Chair Initiative). Unfortunately, visa restrictions meant he could only come to South Africa for a month.
It would have been very beneficial if some of the UKRI funds could have been used to send the other good applicant, Siziwe Gqoba, from Wits to the University of Ghana to work with Dr David Dodoo-Arhin, but UKRI disallowed this.
In the 2nd round, Dr Francis Otieno was selected from four candidates, and even though not from an ARUA university, he was allowed to come to Wits to be hosted by Profs. Daniel Wamwangi and Rudolf Erasmus. His initial award was for 6 months, but permission was granted to extend it. He has submitted one conference abstract, and completed some papers from his earlier related work.
Year(s) Of Engagement Activity 2021,2022,2023
 
Description Africa-UK Physics Partnerships programme working group 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Profs. Quandt and Cornish are part of the Working Group which is to facilitate meaningful collaborations between the UK and Africa in Physics. There were meetings on 16 December 2021 (online - joined after the last ARUA Advisory Board Meeting), 21 January 2022 (online) 7 March 2022 (physical at Wits) and 17 March 2023 (online). There was also an online meeting on 15 March 2022 with Oxford Policy Management (OPM) to provide more background to help OPM draft the policy documents. The broad areas of Weather & Climate and Energy are still the target areas. The first part of the planning is now nearly completed and the IOP is now designing the overview phase. They plan to use some ARUA CoEs to help run the projects, and collaboration is expected across at least two African countries, as well as the UK.
The target countries are: Kenya, Rwanda, South Africa, Tanzania and Uganda. The targets are: Academic and staff capital, Training and education pipeline, Large-scale research facilities, Research infrastructure, Gender inclusivity, Funders and partners, R&D and innovation outputs and Collaborations and networks. The first part of the planning is now nearly completed and the IOP is now designing the overview phase. They plan to use some ARUA CoEs to help run these, and collaboration is expected across at least two African countries, as well as the UK.
Year(s) Of Engagement Activity 2021,2022
 
Description African Materials Research Society (AMRS) Conference, Dakar, Senegal, 12 - 15 December 2022 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact This was the first time that the African Materials Research Society (AMRS) Conference took place since 2019, due to COVID-19. Early career researchers were encouraged to attend, for networking. Eleven 11 ARUA participants attended. There were also two days of workshops prior to the conference which the early career researchers attended. Prof. Cornish gave a presentation and also chaired a breakaway session. Several researchers from ARUA CoE-MEN also presented.
Year(s) Of Engagement Activity 2022
 
Description African Synchrotron Network for Advanced Energy Materials (ASNAEM) workshop, Johannesburg, South Africa, July 2020 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Prof. Alex Quandt gave a presentation "Solar Cell Simulations (Made Easy )".
Year(s) Of Engagement Activity 2020
 
Description Building Capacity for Sustainable Development in Materials, Energy, and Nanotechnology: 30 July - 3 August 2023 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Hybrid workshop at Wits with contributions from all African ARUA CoE-MEN universities. 15 invited speakers from industry and academia. Hands-on activities: speed networking, role-playing, proposal writing for a grant application and preparation of a compelling application letter.
Participants were from 17 African countries, including Ghana, India, Kenya and South Africa. Prof. Cornish gave an overview of the ARUA CoE-MEN.
Year(s) Of Engagement Activity 2023
 
Description Colloquium (Town and Gown programme), Covenant University, Nigeria, July 2021 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Prof. Alex Quandt gave his presentation "Power from the Sun" at the event.
Year(s) Of Engagement Activity 2021
 
Description Lecture at Sheffield University 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact As part of my visit to the UK, and working with Prof. Andy Watson, I was also invited to give a presentation at Sheffield University, entitled "Titanium-based alloys with copper additions for dental applications", as well as talking about ARUA.
Year(s) Of Engagement Activity 2019
 
Description Lightning Protection of Energy and Power Systems: Industrial Applications and Research Development Workshop, Sandton, South Africa, 30 - 31 May 2023 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Physical: To minimize the negative impacts of lightning in the industry and showcase the R&D capacity at the lightning research group at Wits to attract postgraduate students and industry-academia collaborations.
Year(s) Of Engagement Activity 2023
 
Description MINI-CONFERENCE: "Energy Solutions for Africa", 17 May 2023, hosted by AMRS 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Online conference: 13 presentations, 4 Plenary Speakers (Wits). Electronic Book of Abstracts. Participants from Algeria, Botswana, Cameroon, Canada, Chad, Colombia, Congo, Egypt, Ethiopia, Germany, Ghana, India, Iraq, Japan, Kenya, Korea, Lesotho, Malawi, Morocco, Nigeria, Rwanda, Senegal, Somalia, South Africa, Sudan, Sweden, Tanzania, Tunisia, Uganda, USA and Zimbabwe.
Year(s) Of Engagement Activity 2023
URL https://www.youtube.com/@AfricanMRS/playlists?view=50&sort=dd&shelf_id=1
 
Description MINI-CONFERENCE: "Materials, Energy and Nanotechnology". 19 August 2022, hosted by the African Material Research Society for ARUA CoE-MEN 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact There were 27 individual presentations, from institutes in eleven African countries were represented (Bénin, Botswana, Côte d'Ivoire, Egypt, Ethiopia, Ghana, Kenya, Nigeria, South Africa, Sudan and Tunisia), as well as collaborators in five non-African countries (Canada, China, India, Korea and Malaysia). There were with the four plenary speakers. Questions were dealt with at the end in the wrap-up section, or in the chat box. All the presenters were sent electronic certificates of participation, as were the registered attendees. There were 200 unique viewers and the maximum was 117 at a given time. An electronic Book of Abstracts was compiled and shared on the site.
Year(s) Of Engagement Activity 2022
URL https://youtube.com/playlist?list=PLieb5v0ZzbkTfYCMHFR1Nin5CWS5XeksK
 
Description MINI-CONFERENCE: "Nanotechnology", 19 July 2023, hosted by AMRS 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Study participants or study members
Results and Impact Online: 18 presentations, 3 Plenary Speakers (Wits, U. Ghana). Electronic Book of Abstracts.
Participants were from Botswana, Côte d'Ivoire, Congo, Egypt, Ethiopia, France, Germany, Ghana, Greece, Kenya, Malawi, Morocco, Nigeria, Rwanda, Senegal, Singapore, South Africa, Tanzania, Togo, Uganda, USA, Western Sahara and Zimbabwe.
Year(s) Of Engagement Activity 2023
URL https://www.youtube.com/@AfricanMRS/playlists?view=50&sort=dd&shelf_id=1
 
Description MINI-CONFERENCE: "Urgent Materials Needs for Africa", 24 May 2023, hosted by AMRS 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Online: 11 presentations, 3 Plenary Speakers (Wits, U. Cape Town, U. Pretoria). Electronic Book of Abstracts.
Participants were from Botswana, Egypt, Kenya, Mauritius, Netherlands, South Africa, Sweden and Tunisia, although not all countries were recorded.
Year(s) Of Engagement Activity 2023
URL https://www.youtube.com/@AfricanMRS/playlists?view=50&sort=dd&shelf_id=1
 
Description MSI Workshop, Ghana, 14 - 18 August 2023 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Physical: 6 Evaluation Reports for publication submitted to MSI by groups of 4 or 5. Experience in reading, writing and deadlines.
Participants were from Ghana, Kenya and South Africa.
Year(s) Of Engagement Activity 2023
 
Description MSIT Workshop, Ghana, 29 May - 2 June 2023 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Physical: 6 Evaluation Reports for publication submitted to materials Science International (MSI) by groups of 4 or 5. Experience in reading, writing and deadlines.
Participants were from Ghana and Kenya, South Africa.
Year(s) Of Engagement Activity 2023
 
Description Member of "Physics tackling the impact of climate change in Africa" panel, precursor for COP27, online: 3rd November 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact This was an online panel held just before COP27 to heighten interest. There were several panel members who spoke, and then there was a debate afterwards. This arose from the Africa-UK Physics Partnerships programme working group.
Year(s) Of Engagement Activity 2022
 
Description N8 - ARUA Collaboration 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact 9th -10th May 2019. Meeting between ARUA CoEs and N8 universitis. Put into a group with university personnel interested in Energy. Stronger contacts with Stellenbosch, Sheffield and York. Also met UKRI personnel.
Year(s) Of Engagement Activity 2019
 
Description Open Day, part of the CBAS-IAST industry-Academia Exhibitions, U. Ghana, 28 March 2023 
Form Of Engagement Activity Participation in an open day or visit at my research institution
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact Physical: Included a demonstration of fuel made from waste polymers, which was put into the French ambassador's car.
Year(s) Of Engagement Activity 2023
 
Description Open day, Cold Spray Lab, Wits, 28 March 2023 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Physical: Opening of the Cold Spray Lab after refurbishment, showcasing work done, and demonstrated the potential for research and industrial applications. Eight presentations from academia and industry.
Participants from at least 20 companies from Australia, Canada, Germany, India, Italy, South Africa, UK and USA.
Year(s) Of Engagement Activity 2023
 
Description Peer-Learning for Emerging Researchers' Knowledge and Advancement (PERKA) project 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Professional Practitioners
Results and Impact After attending the first meeting on the Peer-Learning for Emerging Researchers' Knowledge and Advancement (PERKA) project) on 13 December 2021, Prof Cornish was interviewed about postdoctoral fellows on 22 April 2022, and Dr Drennan was also interviewed subsequently. It is interesting that PERKA considers undergraduate students to be early / emerging career researchers.
Two early career researchers from ARUA CoE-MEN, Dr Francis Otieno and Dr Adefunke Fabuyide, attended the high-level convening on early career researcher development in the post-PhD phase, at the Cape Town International Convention Centre (CTICC), 6 - 7 December 2022.
Year(s) Of Engagement Activity 2022
 
Description SPIE Optics and Photonics, San Diego, USA, August 2020 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Prof. Alex Quandt gave a presentation "Optical topological materials and winding numbers".
Year(s) Of Engagement Activity 2020
 
Description SPIE Photonics Europe, Strasbourg, France, March-April 2020 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Prof. Alex Quandt gave a talk "Simulations in Glass Photonics".
Year(s) Of Engagement Activity 2020
 
Description Stony Brook University, USA 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On 23 February 2022, Prof. Cornish gave an invited online talk on developing titanium-based alloys with copper additions for dental applications, as an Online Departmental Colloquium, Department of Materials Science and Chemical Engineering. She also described ARUA CoE-MEN.
Year(s) Of Engagement Activity 2022
 
Description The Faraday Institute 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact On 3 May 2022, Prof Cornish met with Elvis Skoko, an Energy Storage Consultant from The Faraday Institute, in London, to discuss possible collaboration, and introduced him to Prof. Kenneth Ozoemena by email.
Year(s) Of Engagement Activity 2022
 
Description UON AFRETEC Faculty Enrichment Training Workshop Grant Management and Proposal Writing Program, University of Nairobi, Kenya, presented online, 5th October 2023 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Postgraduate students
Results and Impact Lesley Cornish presented: Perspectives of a successful researcher from University of the Witwatersrand: Tips on Proposals and Running Networks and Centres" at the UON AFRETEC Faculty Enrichment Training Workshop Grant Management and Proposal Writing Program, University of Nairobi, Kenya, 5th October 2023.

She was invited to do this by the organisers.
Year(s) Of Engagement Activity 2023
 
Description Visit to Brookhaven National Laboratory, USA, 22 - 23 October 2019 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Five ARUA collaborators met with about a dozen BNL workers to find out how the collaborations work, and have a tour of some of the facilities. ARUA Members were told there is no fee for collaboration, just own transport costs.
Year(s) Of Engagement Activity 2019
 
Description Visit to Coventry University 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact We had In depth discussions with academics from Coventry University on planning for the Modelling and Phase Diagram Roadshow to teach a wide range of students in Africa. We had been in e-mail contact for this for several months, but this was the first time we could bring the interested parties together. There was also discussions on degree structure and various forms of co-supervision between different universities.
Year(s) Of Engagement Activity 2019
 
Description Visit to Coventry University 4 May 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Prior to this event, there was an ARUA - Coventry University meeting, online, on 23 February 2022 to discuss potential collaborations, with Ms Renee le Roux (Head Pre Award Support, Wits), Prof. Cornish (Wits) and Nelson Ijumba (Rwanda University/Coventry University).

On 4 May 2022, Prof. Cornish visited Coventry University, for a short presentation on ARUA CoE-MEN followed by an open discussion with several researchers on potential collaboration and was given a mini-tour of the facilities. There was interest in collaboration and some of the original work on the UKRI funding should continue. Prof Cornish met a former PhD student Dr Mtchell Leering of Prof. Claudia Polese who is now a postdoc at Coventry University.
Year(s) Of Engagement Activity 2022
 
Description Visit to University of Birmingham 5 May 2022 
Form Of Engagement Activity A talk or presentation
Part Of Official Scheme? No
Geographic Reach Regional
Primary Audience Professional Practitioners
Results and Impact There had been prior contact with the University of Birmingham, and Prof. Cornish had been invited to give a talk in the Refractory Metals Symposium at the TMS 2022 Meeting in California in February 2022. She spoke about the technical aspect as well as describing ARUA CoE-MEN in her presentation. She also had a lunchtime meeting to discuss collaborative work with Dr Sandy Knowles and others in the refractory materials area.
On 5 May 2022, Prof. Cornish visited the University of Birmingham, was given a mini-tour of the facilities, met several researchers, including the Head of the School, Prof. A. Davenport, and gave a talk on developing titanium-based alloys with copper additions for dental applications. The talk also described ARUA CoE-MEN and raised much interest. She also had a lunchtime meeting to discuss collaborative work with Dr Sandy Knowles and Dr Sophie Cox. Dr A. Knowles agreed to make some videos, and has done so.
Year(s) Of Engagement Activity 2022
 
Description WRITING WORKSHOP, 24-25 October 2022, Nairobi, Kenya 
Form Of Engagement Activity A formal working group, expert panel or dialogue
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact Hosted by Prof. George Rading, U. Nairobi, as part of the 4th Engineering Conference (EC 2022) at the University of Nairobi. The Grant Proposal Writing Workshop was held on 24 October, and was presented by Dr Yolanda Davids, Dr Renee le Roux, Dr Duncan O. Mbuge and Dr Jean Paul Obiero. The Publication Writing Workshop was given by Prof. Elly Grossman, with Prof. Lesley Cornish and Prof. Michael Witcomb, who also read and critiqued the submitted work from the applicants. Feedback was given on a one-to-one session (mostly online) the following week. Both workshops were hybrid.
Year(s) Of Engagement Activity 2022
 
Description Wits Inter-faculty Symposium on Climate, Sustainability and Inequality, Wits, South Africa, August 2022 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach Local
Primary Audience Professional Practitioners
Results and Impact The was arranged across Wits to look at the different effects of Climate, Sustainability and Inequality from different angles. It was over two days and presentations were given by various Wits academics, with time for short questions after each presentation. Prof. Alex Quandt prese "Anything new under the Sun?" and Prof. Dave Bill also presented.
Year(s) Of Engagement Activity 2022
 
Description Workshop on Waste Conversion, Modelling and 3D Printing- University of Ghana 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Professional Practitioners
Results and Impact The workshop was opened by the Vice Chancellor in the company with the French Ambassador. It involved keynote presentations on "Strengthening research and innovation capacities in sustainable energy production from waste and biomass in response to global challenges" and Waste as a global challenge: two case studies in metal recovery and biodegradable electronics from organic waste. There was hands on practical sessions on techniques such as DFT/COMSOL/ABAQUS, MATLAB Coding, and 3-D Printing.
Year(s) Of Engagement Activity 2023
URL https://www.ug.edu.gh/news/iast-and-partners-hold-workshop-waste-conversion-and-modeling
 
Description Workshop on Waste Conversion, University of Ghana, 6 - 10 February 2023 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach National
Primary Audience Industry/Business
Results and Impact Physical: Showcased some of the work being done at U. Ghana on waste conversion and trained the attendees in different techniques.
Year(s) Of Engagement Activity 2023
 
Description Writing Workshop, Ghana, 21 - 25 August 2023 
Form Of Engagement Activity Participation in an activity, workshop or similar
Part Of Official Scheme? No
Geographic Reach International
Primary Audience Postgraduate students
Results and Impact Physical: One lecturer, with two helpers who also read the submissions which comprised their research work: eith for submission for their degrees or as journal articles.

Participants were mainly from Ghana and the facilitators were from South Africa.

The four undergraduate students have all graduated with their BSc (Hons) degrees.

The six Master's students successfully submitted dissertations and are awaiting external assessment.

The six PhD students have all submitted their Research Proposals and Review papers and they are currently under review by the department and later, to the journals.
Year(s) Of Engagement Activity 2023