Predictive Modelling for Incremental Cold Flow Forming: An integrated framework for fundamental understanding and process optimisation

Lead Research Organisation: University of Glasgow
Department Name: School of Engineering


Incremental cold flow forming (ICFF) is a metal forming process for the production of high-quality, rotationally-symmetric, hollow engineering components as widely utilised by the aerospace, automotive and oil & gas sectors.

In ICFF, a cylindrical preform is attached to a rotating mandrel and axially-translating rollers apply compression to the outer surface. This leads to extrusion of the workpiece material via significant plastic deformation. As a result of the incremental process - rollers are in contact with a small area of the exterior surface of the workpiece at any one time - the extrusion of the material occurs with significantly lower force than required for conventional forming processes. ICFF is thus well suited to high-strength, hard-to-deform materials. The process is "cold" as a coolant is applied where contact occurs between the workpiece and the roller. The deformation occurs significantly below the material's recrystallisation temperature. As a result, cold work hardening occurs leading to increased strength, stiffness and hardness of the final product.

A significant advantage of ICFF over conventional forging and deep drawing is the flexibility it gives engineers to design complex components of varying size. ICFF can result in considerable cost savings via improved yields, reduced production times and improved material properties, as compared to standard manufacturing routes. Furthermore, ICFF allows for rapid prototyping to support virtual product design, thereby reducing development cost and driving innovation.

Despite the significant advantages that ICFF has over conventional methods, considerable challenges remain. These must be overcome prior to its widespread adoption. Foremost is the unsatisfactory repeatability and reliability of the process; it can be unstable and failure of the material can occur. Controlling the complex ICFF process is challenging. This is compounded by the large number of process parameters and the highly nonlinear nature of the deformation. Critically, there is currently no accurate and robust model to elucidate the fundamental physical mechanisms that occur during ICFF. Without such a model, the application of ICFF to new products and materials will require costly trial-and-error component-scale testing and remain an art as opposed to a science. The primary aim of this collaborative research proposal between the Advanced Forming Research Centre (AFRC) and the Glasgow Computational Engineering Centre (GCEC) is to develop an engineering design framework to model ICFF.

Understanding the response of materials to the loading regime imposed by ICFF is a key component of the model development. To this end, we will undertake a detailed materials characterisation study at the AFRC. The loading on the workpiece will be measured using a highly-instrumented, research-dedicated ICFF machine. In addition, a materials characterisation procedure for ICFF will be developed that will allow industry to test new materials for ICFF thereby reducing the need for costly ICFF trials.

The computational model will build upon and significantly extend the existing framework provided by MoFEM - a state-of-the-art, general purpose finite element library developed within the GCEC. The model will account for all key features of ICFF, including significant deformations, contact between rotating parts, thermal effects and residual stresses. The highly non-linear and coupled nature of these processes makes modelling challenging. The modular nature of MoFEM allows us to focus on designing new, efficient and robust numerical methods for ICFF rather than developing the core of the library.

The ability of the model to accurately simulate a range of ICFF applications will be demonstrated using component scale testing conducted at the AFRC. Finally the predictive capabilities of the model will be assessed by numerically optimising the process parameters to achieve a desired net shape.

Planned Impact

The project will deliver significant impact to the aerospace, automotive and oil & gas sectors. They require high-precision, hollow components often made of expensive, hard-to-form materials for which the ICFF process is ideally suited. The modelling tool developed will help transform ICFF into a reliable and predictable process for producing such components. It will be used by engineers as part of the virtual product design process - an integral part of manufacturing in the future. The tool will deliver the flexibility and efficiency required for component optimisation (an iterative process).

Many aspects of the ICFF process are common to other forming, forging and joining applications (e.g. large deformations and contact). The modelling tool developed can be modified and adapted to improve predictions for these applications. The underlying code will be open source and freely available to researchers and industry.

The AFRC is led by its industrial members (Blackwell is Chair of the Technical Board) which include Boeing, Timet, Aubert & Duval, Baker Hughes GE, Bifrangi, Spirit AeroSystems, among others. We will regularly inform the industrial members of the AFRC, who represent many of the major UK manufacturing firms, on our progress and how our research could improve their manufacturing processes. Thus, our research will deliver significant impact on UK manufacturing as they will have access to state-of-the-art modelling tools and the researchers that develop them.

The library MoFEM is general purpose and can be applied to a vast range of important industrial processes. Industry and academia will benefit from the investment this project will make into the development of the library. This project will expose industry to the benefits of using quality open source tools, thereby saving them significant costs. In addition, by using MoFEM, they will be investing directly into growing capacity and skills in the UK.

The project will produce extensive experimental data on the ICFF process as well as on the evolution of material properties and microstructure. These data are expensive and hard to obtain - they require a facility like the AFRC. They will be used by materials scientists and engineers to develop their own models and ICFF operating procedures.

The new test methodology to generate material data specifically for ICFF will lead to significant cost savings for manufacturers. The methodology will replace costly ICFF trials. This is particularly important for the development of the next generation of materials where quantities are often small during the development stage.

The AFRC is a world-leading facility. The GCEC is a leading Computational Engineering research centre in the UK. This project will have significant impact for both Centres and the industry and research they support. The grand challenges in materials science and engineering require a multidisciplinary and collaborative approach. This new collaboration between these leading Centres will deliver exactly this multidisciplinary approach. It will lead to a strong partnership thereby reinforcing the investment made by the EPSRC and government.

The PDRAs will receive world-class training in integrated computational and experimental mechanics. They will work as a team to deliver this truly multidisciplinary project. They will also interact directly with leading UK industry.


10 25 50
publication icon
Lewandowski K (2023) Multifield finite strain plasticity: Theory and numerics in Computer Methods in Applied Mechanics and Engineering

publication icon
Tsagkari E (2022) The role of shear dynamics in biofilm formation. in NPJ biofilms and microbiomes

Title MoFEM 
Description MoFEM (Mesh Oriented Finite Element Method) is a C++ library supporting the solution of finite elements problems. It integrates advanced numerical tools for solving large-scale, multi-physics finite element analysis on multiple computer platforms, from laptops to high performance computers. It is a flexible, future-proof and sustainable software framework, enabling researchers to focus on the underlying physics and application of their work. It provides a shared software development platforms for new advances in FE technology and associated numerical techniques (e.g. parallel computing, mesh adaptivity and evolving geometries). It integrates software development infrastructure, with shared repositories, version control, continuous code testing, validation, code documentation software, naming conventions, etc. 
Type Of Technology Software 
Year Produced 2022 
Open Source License? Yes  
Impact MoFEM is being evaluated by the nuclear industry to be used for possible future safety cases related to life extension of the UK's fleet of Advanced Gas-Cooled Nuclear Reactors (AGRs). MoFEM provides a finite element analysis framework for the durability analysis of composites. MoFEM is being used for a wide array of multi-physics applications