Future reliable renewable energy conversion systems & networks: A collaborative UK-China project.
Lead Research Organisation:
Newcastle University
Department Name: Electrical, Electronic & Computer Eng
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Organisations
- Newcastle University (Lead Research Organisation)
- Hebei University of Technology (Collaboration)
- Nanjing University of Aeronautics and Astronautics (Collaboration)
- Chongqing University (CQU) (Project Partner)
- Zhejiang University (Project Partner)
- Tsinghua University (Project Partner)
- GE Global Research (Project Partner)
- Sichuan University (Project Partner)
- EM Renewables Ltd (Project Partner)
- Emerson (United Kingdom) (Project Partner)
- Chinese Academy of Sciences (Project Partner)
- New & Renewable Energy Ctr NaREC (Project Partner)
- Mott Macdonald (United Kingdom) (Project Partner)
- Goldwind (China) (Project Partner)
Publications
Zhou G
(2017)
High Sensitivity Refractometer Based on Reflective Smf-Small Diameter No Core Fiber Structure.
in Sensors (Basel, Switzerland)
Zhang X
(2019)
CFRP Impact Damage Inspection Based on Manifold Learning Using Ultrasonic Induced Thermography
in IEEE Transactions on Industrial Informatics
Zhang H
(2016)
Identification and characterisation of steel corrosion using passive high frequency RFID sensors
in Measurement
Zhang D
(2015)
Thickness measurement of multi-layer conductive coatings using multifrequency eddy current techniques
in Nondestructive Testing and Evaluation
Yu Y
(2017)
Conductivity Invariance Phenomenon of Eddy Current NDT: Investigation, Verification, and Application
in IEEE Transactions on Magnetics
Yi Q
(2019)
New features for delamination depth evaluation in carbon fiber reinforced plastic materials using eddy current pulse-compression thermography
in NDT & E International
Yang H
(2014)
Transient-spatial pattern mining of eddy current pulsed thermography using wavelet transform
in Chinese Journal of Mechanical Engineering
Wen D
(2019)
Extraction of LOI Features From Spectral Pulsed Eddy Current Signals for Evaluation of Ferromagnetic Samples
in IEEE Sensors Journal
Wang Y
(2018)
Thermal Pattern Contrast Diagnostic of Microcracks With Induction Thermography for Aircraft Braking Components
in IEEE Transactions on Industrial Informatics
Wang P
(2014)
Features extraction of sensor array based PMFL technology for detection of rail cracks
in Measurement
Wan Z
(2011)
Investigation of drag effect using the field signature method
in Measurement Science and Technology
Song J
(2020)
Ensemble tensor decomposition for infrared thermography cracks detection system
in Infrared Physics & Technology
Ren W
(2013)
Quantitative non-destructive evaluation method for impact damage using eddy current pulsed thermography
in Composites Part B: Engineering
Qiu F
(2017)
Characterization of applied tensile stress using domain wall dynamic behavior of grain-oriented electrical steel
in Journal of Magnetism and Magnetic Materials
Peng J
(2015)
Investigation into eddy current pulsed thermography for rolling contact fatigue detection and characterization
in NDT & E International
Liu S
(2014)
Analytical solutions of cracks emanating from an elliptic hole in an infinite plate under tension
in Chinese Journal of Mechanical Engineering
Liu J
(2014)
Investigation of thermal imaging sampling frequency for eddy current pulsed thermography
in NDT & E International
Liu J
(2019)
Domain wall characterization inside grain and around grain boundary under tensile stress
in Journal of Magnetism and Magnetic Materials
Liang T
(2016)
Low energy impact damage detection in CFRP using eddy current pulsed thermography
in Composite Structures
Li X
(2017)
Quantitative Surface Crack Evaluation Based on Eddy Current Pulsed Thermography
in IEEE Sensors Journal
Li K
(2014)
State Detection of Bond Wires in IGBT Modules Using Eddy Current Pulsed Thermography
in IEEE Transactions on Power Electronics
Huang D
(2016)
Thermal pattern reconstruction of surface condition on freeform-surface using eddy current pulsed thermography
in Sensors and Actuators A: Physical
Hu Y
(2017)
Efficiency Improvement of Nonuniformly Aged PV Arrays
in IEEE Transactions on Power Electronics
Hu Y
(2015)
Online Two-Section PV Array Fault Diagnosis With Optimized Voltage Sensor Locations
in IEEE Transactions on Industrial Electronics
He Y
(2013)
Eddy current step heating thermography for quantitatively evaluation
in Applied Physics Letters
He Y
(2014)
Impact evaluation in carbon fiber reinforced plastic (CFRP) laminates using eddy current pulsed thermography
in Composite Structures
He Y
(2014)
An investigation into eddy current pulsed thermography for detection of corrosion blister
in Corrosion Science
He Y
(2014)
Non-destructive testing of low-energy impact in CFRP laminates and interior defects in honeycomb sandwich using scanning pulsed eddy current
in Composites Part B: Engineering
Han W
(2016)
Cuckoo Search and Particle Filter-Based Inversing Approach to Estimating Defects via Magnetic Flux Leakage Signals
in IEEE Transactions on Magnetics
Han W
(2014)
Fast estimation of defect profiles from the magnetic flux leakage signal based on a multi-power affine projection algorithm.
in Sensors (Basel, Switzerland)
Gao Y
(2017)
Electromagnetic pulsed thermography for natural cracks inspection.
in Scientific reports
Gao B
(2014)
Automatic Defect Identification of Eddy Current Pulsed Thermography Using Single Channel Blind Source Separation
in IEEE Transactions on Instrumentation and Measurement
Gao B
(2016)
Multidimensional Tensor-Based Inductive Thermography With Multiple Physical Fields for Offshore Wind Turbine Gear Inspection
in IEEE Transactions on Industrial Electronics
Gao B
(2018)
Physics-Based Image Segmentation Using First Order Statistical Properties and Genetic Algorithm for Inductive Thermography Imaging.
in IEEE transactions on image processing : a publication of the IEEE Signal Processing Society
Gao B
(2014)
Thermography pattern analysis and separation
in Applied Physics Letters
Fan M
(2017)
Pulsed eddy current thickness measurement using phase features immune to liftoff effect
in NDT & E International
Ding S
(2017)
Analysis of domain wall dynamics based on skewness of magnetic Barkhausen noise for applied stress determination
in Journal of Magnetism and Magnetic Materials
Cumanan K
(2014)
Secrecy Rate Optimizations for a MIMO Secrecy Channel With a Multiple-Antenna Eavesdropper
in IEEE Transactions on Vehicular Technology
Cheng L
(2012)
Comparison of Nondestructive Testing Methods on Detection of Delaminations in Composites
in Journal of Sensors
Cheng L
(2011)
Surface Crack Detection for Carbon Fiber Reinforced Plastic (CFRP) Materials Using Pulsed Eddy Current Thermography
in IEEE Sensors Journal
Cheng L
(2014)
Impact Damage Detection and Identification Using Eddy Current Pulsed Thermography Through Integration of PCA and ICA
in IEEE Sensors Journal
Buhari M
(2019)
Microwave-Based SAR Technique for Pipeline Inspection Using Autofocus Range-Doppler Algorithm
in IEEE Sensors Journal
Bai L
(2014)
Reducing the Effect of Surface Emissivity Variation in Eddy Current Pulsed Thermography
in IEEE Sensors Journal
Bai L
(2013)
Spatial and Time Patterns Extraction of Eddy Current Pulsed Thermography Using Blind Source Separation
in IEEE Sensors Journal
Bai L
(2013)
A comparative study of principal component analysis and independent component analysis in eddy current pulsed thermography data processing.
in The Review of scientific instruments
Alamin M
(2012)
Principal Component Analysis of Pulsed Eddy Current Response From Corrosion in Mild Steel
in IEEE Sensors Journal
Description | Integration of NDE and SHM have good application potentials in line with robotics and big data. RFID based IOT monitoring systems can be developed and applications beyond renewable energy. AS general chair, ENDE2019 will take place in China |
Exploitation Route | New international collaboration will be explored. Several new grants and industrial applications take place. More industrial projects and research links are developed. |
Sectors | Aerospace, Defence and Marine,Digital/Communication/Information Technologies (including Software),Electronics,Energy,Environment,Healthcare,Manufacturing, including Industrial Biotechology,Retail,Transport,Other |
URL | http://www.hemow.eu |
Description | Condition based maintenance and intelligent monitoring based on simulation and experimental studies are developed. Several NSFC grants including key instrument projects have been granted. New sensing and imaging studies have some progression. More international collaboration were established |
Sector | Aerospace, Defence and Marine,Construction,Electronics,Energy,Environment,Transport,Other |
Impact Types | Societal,Economic |
Description | Chinese Scholarship Council |
Amount | £10,000 (GBP) |
Funding ID | Yunze He |
Organisation | University of Leeds |
Department | China Scholarship Council |
Sector | Academic/University |
Country | United Kingdom |
Start | 02/2011 |
End | 02/2012 |
Description | Chongqing University |
Amount | ¥120,000 (CNY) |
Organisation | Chongqing University |
Sector | Academic/University |
Country | China |
Start | 03/2010 |
End | 02/2013 |
Description | Commission of the European Communities |
Amount | £225,000 (GBP) |
Funding ID | HEMOW 269202 |
Organisation | European Commission |
Sector | Public |
Country | European Union (EU) |
Start | 03/2011 |
End | 03/2015 |
Description | Game changer Proposal and Poster |
Amount | £5,000 (GBP) |
Organisation | National Nuclear Laboratory |
Sector | Public |
Country | United Kingdom |
Start | 09/2016 |
End | 03/2017 |
Description | NDTonAIR: Training Network in Non-Destructive Testing and Structural Health Monitoring of Aircraft structures |
Amount | £189,034 (GBP) |
Funding ID | 722134 |
Organisation | European Commission |
Sector | Public |
Country | European Union (EU) |
Start | 04/2017 |
End | 04/2020 |
Description | Natural Science Foundation of China |
Amount | £150,000 (GBP) |
Funding ID | 51007069 and 51377015 |
Organisation | National Science Foundation China |
Sector | Public |
Country | China |
Start | 03/2014 |
End | 12/2017 |
Description | Hebei University of Technology, China |
Organisation | Hebei University of Technology |
Country | China |
Sector | Academic/University |
PI Contribution | Newcastle University Install one ECPTsystem for Hebei University of Technology, China |
Collaborator Contribution | Research link and knowledge transfer |
Impact | Visiting research Equipment installation |
Start Year | 2012 |
Description | Nanjing University of Aeronautics and Astronautics |
Organisation | Nanjing University of Aeronautics and Astronautics |
Country | China |
Sector | Academic/University |
PI Contribution | Joint PhDs, CSC funded visitors FP7 grants |
Collaborator Contribution | Newcastle Provide one eddy current pulsed thermography to NUAA |
Impact | Joint publication |
Start Year | 2009 |
Description | Panellist in ENDE 2015 |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | The 20th International Workshop on Electromagnetic NonDestructive Evaluation, ENDE2015, was successfully held at the Katahira Sakura Hall, Tohoku University, Sendai, Japan, 21-23, September. A keynote lecture by Professor Gerd Dobmann titled 'Global trend of ENDE studies' was held on 22nd to review the development of studies of electromagnetic non-destructive evaluations in the last couple of decades. The recent trends of the studies were then discussed in a subsequent panel session titled 'ET&ENDE - Where we are and where we want to go?' where three distinguished professors, Professor Antonello Tamburrino, Professor Gui Yui Tian, and Professor Lalita Udpa, were invited as panelists. |
Year(s) Of Engagement Activity | 2015 |