Sound bullets for enhanced biomedical ultrasound systems
Lead Research Organisation:
University of Leeds
Department Name: Electronic and Electrical Engineering
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Publications
Harput S
(2014)
New performance metrics for ultrasound pulse compression systems
Harput S
(2014)
Superharmonic imaging with chirp coded excitation: filtering spectrally overlapped harmonics.
in IEEE transactions on ultrasonics, ferroelectrics, and frequency control
Hutchins D
(2014)
The study of chain-like materials for use in biomedical ultrasound
Hutchins D
(2015)
Generation of Impulses from Single Frequency Inputs Using Non-linear Propagation in Spherical Chains
in Physics Procedia
Hutchins D
(2015)
Erratum: Evolution of ultrasonic impulses in chains of spheres using resonant excitation
in EPL (Europhysics Letters)
Hutchins D
(2015)
Evolution of ultrasonic impulses in chains of spheres using resonant excitation
in EPL (Europhysics Letters)
Hutchins DA
(2016)
Ultrasonic propagation in finite-length granular chains.
in Ultrasonics
Adams C
(2017)
An Adaptive Array Excitation Scheme for the Unidirectional Enhancement of Guided Waves
in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Harput S
(2017)
Generation of Ultrasound Pulses in Water Using Granular Chains with a Finite Matching Layer
in Physical Review Applied
Adams C
(2018)
HIFU Drive System Miniaturization Using Harmonic Reduced Pulsewidth Modulation.
in IEEE transactions on ultrasonics, ferroelectrics, and frequency control
Askari M
(2020)
An ultrasonic metallic Fabry-Pérot metamaterial for use in water
in Additive Manufacturing
Adams C
(2020)
HIFU Power Monitoring Using Combined Instantaneous Current and Voltage Measurement.
in IEEE transactions on ultrasonics, ferroelectrics, and frequency control
Askari M
(2020)
Additive manufacturing of metamaterials: A review
in Additive Manufacturing
Astolfi L
(2021)
Holey-structured tungsten metamaterials for broadband ultrasonic sub-wavelength imaging in water.
in The Journal of the Acoustical Society of America
Nie L
(2021)
A Metallic Additively Manufactured Metamaterial for Enhanced Monitoring of Acoustic Cavitation-Based Therapeutic Ultrasound
in Advanced Engineering Materials
Astolfi L
(2022)
Optimised polymer trapped-air lenses for ultrasound focusing in water exploiting Fabry-Pérot resonance.
in Ultrasonics
Description | The research developed new methods to convert simple excitation signals into broadband signals suitable for imaging. The technology is based on solitary waves progressing in closely grouped spheres, similar to newtons cradle but on the micro-scale. In this study, an analytical model is created to predict the motion of a finite material attached to a granular chain as a matching layer. An experimental setup is created to verify the estimated motion of the matching material with the new model. The setup consists of a one-dimensional chain of six aluminum spheres, a vitreous carbon matching layer, and an ultrasonic horn. The ultrasonic horn generates a narrow-band input of a 25-cycle sinusoidal tone burst with a center frequency of 73 kHz and a-6-dB bandwidth of 3.5 kHz.The output is measured in water as a train of wideband ultrasonic pulses with a-6-dB bandwidth of 280 kHz,which is predicted with the model as 252 kHz. The results derived in this research work indicate that such chain like systems may be of interest to the biomedical ultrasound community,where a train of high-frequency impulses might have applications in imaging, microbubble dynamics, and high-intensity therapy |
Exploitation Route | The technology could eventually lead to new types of transducers that can be used for both diagnostic imaging and therapeutic purposes. |
Sectors | Electronics Healthcare |
Description | The research findings are early stages but have been extensively published. The collaboration have led on to two successful grants "Therapy Ultrasound Network for Drug Delivery & Ablation Research (ThUNDDAR) Grant Reference: EP/N026942/1 with UCL, Imperial, ICR and Oxford and proposal EP/N034813/1 High Resolution Biomedical Imaging Using Ultrasonic Metamaterials with Warwick and Nottingham. Progressing the findings in both application led healthcare domain (therapeutic ultrasound) and physical metamaterials research. |
First Year Of Impact | 2015 |
Sector | Education,Electronics,Healthcare,Manufacturing, including Industrial Biotechology |
Description | Responsive Mode |
Amount | £830,216 (GBP) |
Funding ID | EP/N034813/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 12/2016 |
End | 11/2019 |
Description | Sound bullets for enhanced biomedical ultrasound systems |
Organisation | University College London |
Department | Mechanical Engineering |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Contribution of acoustic experimental facilities to Warwick as part of the grant. Contribution of robotics fabrication facilities as part of the grant |
Collaborator Contribution | Contribution of simulation facilities by UCL Contribution of micro-fabrication facilities from Warwick |
Impact | Warwick, School of Engineering (EP/K030159/1) UCL Mechanical Engineering (EP/K032070/1 |
Start Year | 2014 |
Description | Sound bullets for enhanced biomedical ultrasound systems |
Organisation | University College London |
Department | Mechanical Engineering |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Physical acoustics and advanced simulation of nonlinear systems. |
Collaborator Contribution | Experimental facilities including rapid prototyping of a new solitary wave transducer array. |
Impact | Yes this collaboration is multidisciplinary. 1. There has been a submitted grant on Metamaterials with Warwick 2. The formation of a successful grant for Healthcare Network Plus with UCL (Therapy Ultrasound Network for Drug Delivery & Ablation Research (ThUNDDAR) Grant Reference: EP/N026942/1) |
Start Year | 2014 |
Description | Sound bullets for enhanced biomedical ultrasound systems |
Organisation | University of Warwick |
Department | School of Engineering |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Contribution of acoustic experimental facilities to Warwick as part of the grant. Contribution of robotics fabrication facilities as part of the grant |
Collaborator Contribution | Contribution of simulation facilities by UCL Contribution of micro-fabrication facilities from Warwick |
Impact | Warwick, School of Engineering (EP/K030159/1) UCL Mechanical Engineering (EP/K032070/1 |
Start Year | 2014 |