Copy of UHF-120 Polytec Ultra-High Frequency Laser Vibrometer

Lead Research Organisation: Newcastle University
Department Name: Sch of Engineering

Abstract

The past decade has seen an explosion in the number of high frequency micro-manufactured devices being developed. Well-known examples include RF-Micro-Electro-Mechanical-Systems (RF-MEMS), Surface Acoustic Wave (SAW) devices for applications in biosensing, SAW devices for applications in digital signal processing (DSP), ultrasound transducers for applications in medical imaging and finally micromachined sonotrodes used in ultrasonic welding technology. This growth will continue as Nano-Electro-Mechanical (NEMS) become more prevalent due to developments in fabrication techniques and materials. For example, the unique electrical and mechanical properties offered by graphene will see devices developed with ever increasing resonant frequencies. An essential part in the development of high frequency devices is the measurement of their dynamic behaviour. This includes natural frequencies, modeshapes, displacement fields and support loss mechanisms. This is critical for design optimisation, optimising process steps and validating any model or simulation. The measurement options available for high frequency systems where displacements may be of the order of picometres are extremely limited and only a few options exist. Contacting characterisation techniques e.g. AFM, load the device and therefore prevent a true accurate measurement of its dynamics. High frequency laser vibrometry presents the only non-invasive measurement option.

We aim to purchase a ultra-high frequency laser vibrometer to enable dynamic characterisation of high frequency microsystems. This equipment will allow the displacement or velocity field of any structure will greater than 4% reflectivity to be measured with picometre resolution and up to a frequency of 1.2 GHz. It will therefore be ideal for characterising SAW devices, high frequency N/MEMS sensors and RF MEMS.

Planned Impact

There has been substantial growth in the number of high frequency devices and sensors for applications in RF communications, biological diagnostics, inertial sensing and signal processing. Characterising the dynamic behaviour of these devices is always an essential step in the development process and currently the UHF-120 represents the best solution for frequencies in excess of 20MHz. Since the trend is towards continually higher frequency it is imperative that the measurement capability keeps apace with developments in fabrication technology and material science that enable this trend to continue. The measurement range of the UHF-120 is from 0 to 1.2 GHz and with picometre resolution. This will therefore meet the measurement needs for both current and future NEMS/MEMS, SAW devices and other high frequency devices.

Publications

10 25 50
 
Description characterisation of surface acoustic waves via LASER vibrometry.
The picometre detection resolution allows for characterisation of inplane vibrating devices through parasitic out of plane motion.
Exploitation Route This is a piece of characterisation equipment. Others may used it.
Sectors Aerospace, Defence and Marine,Electronics,Healthcare

 
Description Using equipment to develop several new high frequency acoustic wave devices for application in biosensing These include polar form Love Wave and Rayleigh wave devices. Extensive use was required. Also, the equipment was used in developing a new horizontal shear high frequency elastic wave device for application of mass sensing in fluid.
First Year Of Impact 2016
Sector Aerospace, Defence and Marine,Electronics,Healthcare