Cambridge Engineering Design Centre (IMRC Renewal)
Lead Research Organisation:
University of Cambridge
Department Name: Engineering
Abstract
Strategy=======The overall aim of the Cambridge EDC is to improve the effectiveness and efficiency of engineering designers and design teams by undertaking research into the theories that will underpin the design methods of the future. These methods will be embodied in software tools, workbooks and publications that support the creation of reliable, high-quality, cost-effective products.Research Themes==============The EDC's is structured under the following research Themes: * Healthcare Design: Design for Patient Safety * Inclusive Design: Designing for the Older and Disabled Users (1) * Process Modelling: Modelling the Design Process * Change Management: Tracking Changes in Products * Design Practice: Understanding Practice * Engineering Knowledge: Capture, Storage and Retrival (1) * Computational Design: Integrated Optimisation Methods and Tools Note (1) These Themes receive zero or minimal support from the IMRC Block Grant.
Organisations
- University of Cambridge (Lead Research Organisation)
- Philips (United Kingdom) (Project Partner)
- Autopolis (Project Partner)
- The Welding Institute (Project Partner)
- Yamazaki Mazak UK Ltd (Project Partner)
- N.A.Software (United Kingdom) (Project Partner)
- Philips (Netherlands) (Project Partner)
- TRUMPH GmbH and Co KG (Project Partner)
- University of Surrey (Project Partner)
- GlaxoSmithKline (United Kingdom) (Project Partner)
- BAE Systems Advanced Technology Centre (Project Partner)
- BT Group (United Kingdom) (Project Partner)
- 2020 Insights LLP (Project Partner)
- Nokia (Finland) (Project Partner)
- Rolls-Royce (United Kingdom) (Project Partner)
- Ford Motor Company (United Kingdom) (Project Partner)
- Loughborough University (Project Partner)
- Linde (United Kingdom) (Project Partner)
- University of Trinidad and Tobago (Project Partner)
- TRUMPF (United Kingdom) (Project Partner)
- Gatsby Charitable Foundation (Project Partner)
- TRUMPF (Germany) (Project Partner)
- Arup Group (United Kingdom) (Project Partner)
- Unilever (United Kingdom) (Project Partner)
- ARTTIC International Management Services (Project Partner)
- GKN (United Kingdom) (Project Partner)
- University College London (Project Partner)
- Oxford Lasers (United Kingdom) (Project Partner)
- Bentley Systems (United Kingdom) (Project Partner)
- Office of Naval Research (Project Partner)
- Kodak (United Kingdom) (Project Partner)
- Applied Spatial Management (Project Partner)
- Owlstone Medical (United Kingdom) (Project Partner)
- University of Birmingham (Project Partner)
- B A E Systems (Project Partner)
- Carl Zeiss (United Kingdom) (Project Partner)
- Doosan (United Kingdom) (Project Partner)
- Ricardo AEA (United Kingdom) (Project Partner)
- BAE Systems (United Kingdom) (Project Partner)
Publications
Kilpinen M.S.
(2007)
Change propagation at the interface of system and embedded software design: Characterising impact analysis tasks and techniques
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
De Weck O.
(2007)
A classification of uncertainty for early product and system design
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
Persad U.
(2007)
A framework for analytical inclusive design evaluation
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
Chalupnik M.J.
(2007)
Understanding design process robustness: A modelling approach
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
Eger T.
(2007)
Engineering change analysis during ongoing product development
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
Maier A.M.
(2007)
Associations between factors influencing engineering design communication
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
Keller R.
(2007)
Product models in design: A combined use of two models to assess change risks
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
Wynn D.C.
(2007)
Modelling iteration in engineering design
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
Ariyo O.O.
(2007)
Predicting change propagation on different levels of granularity: An algorithmic view
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
Flanagan T.
(2007)
Project structure: An important factor in design planning?
in Proceedings of ICED 2007, the 16th International Conference on Engineering Design
Medeiros A.C.B.
(2008)
The influence of ageing on product experience
in Proceedings from the 6th Conference on Design and Emotion 2008
Kerley W.P.
(2008)
Using simulation to support integration of life-cycle engineering activities into an existing design process: A case study
in Proceedings DESIGN 2008, the 10th International Design Conference
Chalupnik M.J.
(2008)
Analysing the relationship between design process composition and robustness to task delays
in Proceedings DESIGN 2008, the 10th International Design Conference
Boersting P.
(2008)
The relationship between functions and requirements for an improved detection of component linkages
in Proceedings DESIGN 2008, the 10th International Design Conference
Ariyo O.O.
(2008)
Hierarchical decompositions for complex product representation
in Proceedings DESIGN 2008, the 10th International Design Conference
Koh E.C.Y.
(2008)
Influence of feature change propagation on product attributes in concept selection
in Proceedings DESIGN 2008, the 10th International Design Conference
Parisini I
(2014)
Potential of a cyclone prototype spacer to improve in vitro dry powder delivery.
in Pharmaceutical research
De Lessio M.P.
(2010)
Analysing plan content using a matrix-based approach
in Managing Complexity by Modelling Dependencies - Proceedings of the 12th International DSM Conference
Ghisu T
(2011)
Robust Design Optimization of Gas Turbine Compression Systems
in Journal of Propulsion and Power
Moultrie J
(2007)
Development of a Design Audit Tool for SMEs *
in Journal of Product Innovation Management
Wyatt D
(2014)
A Scheme for Numerical Representation of Graph Structures in Engineering Design
in Journal of Mechanical Design
Giffin M
(2009)
Change Propagation Analysis in Complex Technical Systems
in Journal of Mechanical Design
Waller S
(2010)
Designing a More Inclusive World
in Journal of Integrated Care
Chalupnik M
(2013)
Comparison of ilities for protection against uncertainty in system design
in Journal of Engineering Design
Eckert C
(2012)
Change as little as possible: creativity in design by modification
in Journal of Engineering Design
Description | The overall aim if the Cambridge Engineering Design Centre (EDC) is to improve the effectiveness and efficiency of engineering designers and design teams by undertaking research into the theories that will underpin the design methods of the future. Methods developed under this grant were embodied in software tools (CAM), workbooks and publications that now support the creation of reliable, high-quality, cost-effective products. The EDC added Design Practice and Design Management to its existing research portfolio, retired the Service Design theme and added one lecturer to its academic staff. Many of the discoveries of note are captured in the academic papers, but highlights include: the delivery of a design process rational capture tool into a leading aerospace company; the further development of a design process modelling tool (Cambridge Advanced Modeller) and its application in a number of engineering companies; the publication of a book on design process improvement; the delivery of a project on risk management in healthcare to the Department of Health; the publication of an inclusive design toolkit and its delivery into school and industry. |
Exploitation Route | Many of the findings from this grant were developed further by the Cambridge Engineering Design Centre under new grants. Numerous collaborators also independently developed the findings. All key work was put in the public domain to encourage use by others. |
Sectors | Aerospace Defence and Marine Construction Education Healthcare Manufacturing including Industrial Biotechology Pharmaceuticals and Medical Biotechnology Transport |
URL | http://www-edc.eng.cam.ac.uk/ |
Description | The findings from this grant have been embedded in a number of tools and methods, most notably: the Inclusive Design Toolkit, which is available online, and associated training workshops for 15 international companies, leading directly to new products and services; the Cambridge Advanced Modeller (CAM) software has been downloaded by several hundred researchers and practitioners and continues to be refined; new optimisation algorithms have been applied in aerospace, nuclear engineering and electrical machines; and a risk management toolkit has been delivered to the healthcare sector and associated risk management training provided for more than 500 healthcare practitioners. |
First Year Of Impact | 2006 |
Sector | Aerospace, Defence and Marine,Digital/Communication/Information Technologies (including Software),Education,Healthcare,Manufacturing, including Industrial Biotechology,Transport |
Impact Types | Societal Economic |
Description | Advanced Manufacturing Supply Chain Initiative |
Amount | £900,000 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 09/2014 |
End | 09/2018 |
Description | Change Management |
Amount | £120,000 (GBP) |
Organisation | BP (British Petroleum) |
Sector | Private |
Country | United Kingdom |
Start | 01/2009 |
End | 12/2010 |
Description | Collaborations for Leadership |
Amount | £815,000 (GBP) |
Organisation | National Institute for Health Research |
Sector | Public |
Country | United Kingdom |
Start | 01/2014 |
End | 12/2018 |
Description | Collaborations for Leadership |
Amount | £1,030,000 (GBP) |
Organisation | National Institute for Health Research |
Sector | Public |
Country | United Kingdom |
Start | 09/2008 |
End | 09/2013 |
Description | Design and Delivery of Robust Hospital Environments in a Changing Climate (DeDeRHECC) |
Amount | £190,000 (GBP) |
Funding ID | EP/G061327/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 08/2009 |
End | 08/2012 |
Description | Full virtuality in design and product development |
Amount | £280,000 (GBP) |
Organisation | European Research Council (ERC) |
Sector | Public |
Country | Belgium |
Start | 04/2009 |
End | 04/2012 |
Description | Healthcare Design |
Amount | £70,000 (GBP) |
Organisation | The Health Foundation |
Sector | Charity/Non Profit |
Country | United Kingdom |
Start | 01/2014 |
End | 12/2015 |
Description | Knowledge Management |
Amount | £80,000 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 09/2009 |
End | 09/2011 |
Description | Process Modelling |
Amount | £480,000 (GBP) |
Organisation | BT Group |
Department | BT Research |
Sector | Private |
Country | United Kingdom |
Start | 03/2013 |
End | 03/2016 |
Description | Process Modelling |
Amount | £75,000 (GBP) |
Organisation | BP (British Petroleum) |
Sector | Private |
Country | United Kingdom |
Start | 01/2014 |
End | 12/2017 |
Description | Process Modelling |
Amount | £50,000 (GBP) |
Organisation | Rolls Royce Group Plc |
Sector | Private |
Country | United Kingdom |
Start | 03/2008 |
End | 03/2009 |
Description | Process Modelling |
Amount | £100,000 (GBP) |
Organisation | BT Group |
Department | BT Research |
Sector | Private |
Country | United Kingdom |
Start | 09/2009 |
End | 09/2012 |
Description | Research Into Global Healthcare Tools (RIGHT) |
Amount | £200,000 (GBP) |
Funding ID | EP/E019900/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2007 |
End | 04/2009 |
Description | SILOET |
Amount | £350,000 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 02/2010 |
End | 01/2013 |
Description | SILOET II |
Amount | £375,000 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 09/2013 |
End | 09/2016 |
Description | TOICA |
Amount | £335,000 (GBP) |
Funding ID | 604981 |
Organisation | European Research Council (ERC) |
Sector | Public |
Country | Belgium |
Start | 08/2013 |
End | 08/2016 |
Description | Theme 5/6 High Performance Computing (HPC) and Simulation Knowledge Mining and Abstraction (SKMA) |
Amount | £600,000 (GBP) |
Funding ID | EP/K014188/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 01/2013 |
End | 12/2017 |
Title | Cambridge Advanced Modeller |
Description | A software tool for modelling and analysing the dependencies and flows in complex systems - such as products, processes and organisations. |
Type Of Technology | Software |
Year Produced | 2008 |
Impact | numerous downloads new industry research awards |
URL | https://www-edc.eng.cam.ac.uk/cam/ |
Title | Exclusion Calculator |
Description | Calculates levels of exclusion for products and services |
Type Of Technology | Software |
Year Produced | 2011 |
Impact | Significant use on line and in conlsultancy |
URL | http://www.inclusivedesigntoolkit.com/betterdesign2/exclusioncalc/exclusioncalc.html |
Title | Impairment Simulation Software |
Description | Simulates some of the main effects of common vision and hearing impairments on image and sound files. |
Type Of Technology | Software |
Year Produced | 2011 |
Impact | Some sales - significant use on line |
URL | http://www.inclusivedesigntoolkit.com/betterdesign2/simsoftware/simsoftware.html |
Title | Inclusive Design Toolkit |
Description | Introduction to inclusive design |
Type Of Technology | Webtool/Application |
Year Produced | 2010 |
Impact | numerous downloads consultancy sales of simulators |
URL | http://www.inclusivedesigntoolkit.com/betterdesign2/ |