Nanofluids in confined geometries: understanding and controlling the behaviour
Lead Research Organisation:
University of Leeds
Department Name: Inst of Particle Science & Engineering
Abstract
This research will further our fundamental understanding of the structural behaviour of nanofluids in confined geometries. A combination of the state-of-the-art devices including a high resolution near field microscope, a total internal reflection microscope (TIRM), an optical reflectometry and an atomic force microscope (AFM) will be used to observe directly nanoparticle structuring in the confined geometries and nanoparticle deposition on the confining walls, and to measure the structural force arising from the confinement-induced nanoparticle structuring. The recently developed Combined Continuous, Discrete and Statistic mechanics (CCDS) method will be employed to model the nanoparticle structuring. The ultimate aim is to establish a relationship between the structural behaviour of the confined nanofluids and the physical and chemical properties of the solution, the suspending nanoparticles, and the confining walls, thus enabling industry to formulate nanofluids based products and to predict how the material properties and solution chemistry impact on the performance of the products.
People |
ORCID iD |
Yulong Ding (Principal Investigator) | |
Simon Biggs (Co-Investigator) |
Publications
Anagnostopoulos A
(2020)
Effect of SiO2 nanoparticle addition on the wetting and rheological properties of solar salt
in Solar Energy Materials and Solar Cells
Anagnostopoulos A
(2020)
Giant Effect of Negative Compressibility in a Water-Porous Metal-CO2 System for Sensing Applications.
in ACS applied materials & interfaces
Anagnostopoulos A
(2021)
Simplified force field for molecular dynamics simulations of amorphous SiO2 for solar applications
in International Journal of Thermal Sciences
Anagnostopoulos A
(2021)
Red mud-molten salt composites for medium-high temperature thermal energy storage and waste heat recovery applications.
in Journal of hazardous materials
Anagnostopoulos A
(2019)
Molecular dynamics simulation of solar salt (NaNO3-KNO3) mixtures
in Solar Energy Materials and Solar Cells
Anagnostopoulos A
(2019)
Effect of temperature on the internal structure of solar salt-SiO2
Chen H
(2009)
Predicting thermal conductivity of liquid suspensions of nanoparticles (nanofluids) based on rheology
in Particuology
Chen H
(2008)
Heat transfer and flow behaviour of aqueous suspensions of titanate nanotubes (nanofluids)
in Powder Technology
Chen H
(2008)
Rheological and heat transfer behaviour of the ionic liquid, [C4mim][NTf2]
in International Journal of Heat and Fluid Flow
Ding Y
(2007)
Heat Transfer Intensification Using Nanofluids
in KONA Powder and Particle Journal
Ding Y
(2010)
Relationship between the thermal conductivity and shear viscosity of nanofluids
in Physica Scripta
Ge Z
(2014)
Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage
in Particuology
Grosu Y
(2020)
Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power
in Solar Energy Materials and Solar Cells
He Y
(2011)
Lattice Boltzmann simulation of alumina-water nanofluid in a square cavity.
in Nanoscale research letters
He Y
(2007)
Heat transfer and flow behaviour of aqueous suspensions of TiO2 nanoparticles (nanofluids) flowing upward through a vertical pipe
in International Journal of Heat and Mass Transfer
He Y
(2009)
Numerical investigation into the convective heat transfer of TiO2 nanofluids flowing through a straight tube under the laminar flow conditions
in Applied Thermal Engineering
Hodges C
(2010)
The influence of nanoparticles on polystyrene adhesion
in Advanced Powder Technology
Hodges CS
(2010)
The influence of nanoparticle shape on the drying of colloidal suspensions.
in Journal of colloid and interface science
Jiang Y
(2015)
Zinc oxide nanoparticle-coated films: fabrication, characterization, and antibacterial properties
in Journal of Nanoparticle Research
Jiang Z
(2015)
Form-stable LiNO 3 -NaNO 3 -KNO 3 -Ca(NO 3 ) 2 /calcium silicate composite phase change material (PCM) for mid-low temperature thermal energy storage
in Energy Conversion and Management
Jin Y
(2010)
A one-step method for producing microencapsulated phase change materials
in Particuology
Lasfargues M
(2016)
In situ production of titanium dioxide nanoparticles in molten salt phase for thermal energy storage and heat-transfer fluid applications.
in Journal of nanoparticle research : an interdisciplinary forum for nanoscale science and technology
Lasfargues M
(2015)
Mechanical Dispersion of Nanoparticles and Its Effect on the Specific Heat Capacity of Impure Binary Nitrate Salt Mixtures.
in Nanomaterials (Basel, Switzerland)
Lee W
(2009)
Effects of laponite and silica nanoparticles on the cleaning performance of amylase towards starch soils
in Particuology
Liu H
(2013)
Three-dimensional graphene/polyaniline composite material for high-performance supercapacitor applications
in Materials Science and Engineering: B
Description | We discovered i) nano-fluids containing non-spherical inorganic nano-particles confined in the wedge region between a substrate and a micro-particle adhered on the substrate also produced a structural force vertical to the surface; and ii) the structural force is normally insufficient for removing the particles from the surface, but upon shearing of the fluidthe structural force plays a significant role in removing the surface particle. Based on such discoveries, nano-fluid based surface cleaning agents were formulated and lab scale tests were very successful. However, formulations from large scale manufacture did not perform as expected. This opens two new research questions - (a) Why the scale-up affects the properties and behaviour of the nano-fluids formulation? (b) Can we turn the liquid based nano-fluids formulation into dry particulate form that can re-disperse in liquid at the user end to reduce transportation costs? These questions led to subsequent sustained collaborations with Procter & Gamble until today (2016). |
Exploitation Route | The project has a strategic industrial sponsor, Procter and Gamble (P&G), so a clear route was identified at the beginning of the project that commercialisation of the research findings is taken forward by P&G. |
Sectors | Aerospace Defence and Marine Chemicals Education Energy Environment |
Description | The findings led to a patent 'Cleaning Method' filed (WO/2007/109239; US20090090387). The project has also led to a long-term collaborative relationship with P&G with sustained support in various forms until today (2016). So far six of my PhD students have been supported by them, of which, two are now employed by P&G. Through the relationship, P&G has also offered both research and design projects for our final year MEng students in chemical engineering. Their inputs in the design projects are particularly important due to their significant industrial experience that hard to obtain in the class room. |
Sector | Aerospace, Defence and Marine,Chemicals,Energy,Environment |
Impact Types | Economic |
Description | Abengoa Solar |
Amount | £200,000 (GBP) |
Funding ID | Leeds-IPSE483360 |
Organisation | Abengoa |
Department | Abengoa Solar |
Sector | Private |
Country | Spain |
Start | 01/2012 |
End | 12/2014 |
Description | Abengoa Solar NT |
Amount | £22,000 (GBP) |
Funding ID | Abengoa - TOK - Leeds |
Organisation | Abengoa |
Department | Abengoa Solar |
Sector | Private |
Country | Spain |
Start | 04/2010 |
End | 05/2011 |
Description | EPSRC Programme Grant |
Amount | £4,227,886 (GBP) |
Funding ID | EP/P00945X/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 12/2016 |
End | 11/2021 |
Description | Energy Stoage Grand Challenge |
Amount | £924,591 (GBP) |
Funding ID | EP/P003435/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2016 |
End | 09/2019 |
Description | Procter & Gamble |
Amount | £36,000 (GBP) |
Funding ID | Structured Particles |
Organisation | Procter & Gamble |
Sector | Private |
Country | United States |
Start | 09/2010 |
End | 09/2013 |
Description | Reduce of End Use Energy Demand |
Amount | £1,573,522 (GBP) |
Funding ID | EP/P004709/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 12/2016 |
End | 12/2020 |
Description | Studentship |
Amount | £10,000 (GBP) |
Funding ID | Crystallisation 2011 |
Organisation | Procter & Gamble |
Sector | Private |
Country | United States |
Start | 07/2011 |
End | 07/2012 |
Description | Studentship |
Amount | £36,000 (GBP) |
Funding ID | Structured Particles |
Organisation | Procter & Gamble |
Sector | Private |
Country | United States |
Start | 09/2010 |
End | 09/2013 |
Description | n-COSH |
Amount | £924,591 (GBP) |
Funding ID | EP/P003435/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2016 |
End | 10/2019 |