SAMULET_Project_2_Combustion Systems for Low Environmental Impact
Lead Research Organisation:
University of Oxford
Department Name: Engineering Science
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Publications
Korsunsky A
(2012)
Analysis of the internal structure and lattice (mis)orientation in individual grains of deformed CP nickel polycrystals by synchrotron X-ray micro-diffraction and microscopy
in International Journal of Fatigue
Korsunsky A.M.
(2012)
Experimentally validated numerical modeling of material deformation across the scales: A review
in Lecture Notes in Engineering and Computer Science
Korsunsky A.M.
(2012)
X-ray texture analysis and imaging of engineering materials at oxford HEX-lab
in Lecture Notes in Engineering and Computer Science
Liu W
(2013)
Grain refinement and fatigue strengthening mechanisms in as-extruded Mg-6Zn-0.5Zr and Mg-10Gd-3Y-0.5Zr magnesium alloys by shot peening
in International Journal of Plasticity
Liu W
(2011)
Improvement of fatigue properties by shot peening for Mg-10Gd-3Y alloys under different conditions
in Materials Science and Engineering: A
Lunt A
(2017)
Characterisation of nanovoiding in dental porcelain using small angle neutron scattering and transmission electron microscopy.
in Dental materials : official publication of the Academy of Dental Materials
Lunt A
(2018)
On the origins of strain inhomogeneity in amorphous materials
in Scientific Reports
Ma L
(2013)
Fundamental Formulation for Transformation Toughening in Anisotropic Solids
in Journal of Applied Mechanics
Malik A
(2013)
Deep reactive ion etching of silicon moulds for the fabrication of diamond x-ray focusing lenses
in Journal of Micromechanics and Microengineering
Mostafavi M
(2013)
Three-dimensional crack observation, quantification and simulation in a quasi-brittle material
in Acta Materialia
Description | For the processes considered (linear friction welding and direct laser metal sintering), new numerical models were developed and validated against experimental data. |
Exploitation Route | Incorporation of the methods developed in this project into the design procedures used by companies such as Rolls-Royce. Validated numerical models used to optimise processing operations and thus to ensure best performance of engineering components and assemblies. |
Sectors | Aerospace, Defence and Marine,Construction,Creative Economy,Electronics,Energy,Environment,Manufacturing, including Industrial Biotechology,Transport |
URL | http://www.korsunsky.org |
Description | 3D printing is revolutionising manufacturing. We made (and are continuing to make) our contribution to understanding the structural integrity (strength and fracture toughness) of materials and components obtained by this route. |
First Year Of Impact | 2012 |
Sector | Aerospace, Defence and Marine,Chemicals,Construction,Energy,Environment,Manufacturing, including Industrial Biotechology,Transport |
Impact Types | Societal,Economic |
Description | Birmingham Dental School |
Organisation | University of Birmingham |
Department | School of Dentistry |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | We advise colleagues at Birmingham School of Dentistry on modern nanoscale characterisation techniques, and implications of these novel approaches for clinical, diagnostic, therapeutic and prosthetic dentistry. |
Collaborator Contribution | We work closely with Birmingham School of Dentistry who provide access to expertise in clinical, diagnostic, therapeutic and prosthetic dentistry, and supply samples for our microscopy and X-ray studies. |
Impact | Multiple publications, joint designs of experiments |
Description | DLS |
Organisation | Diamond Light Source |
Country | United Kingdom |
Sector | Private |
PI Contribution | We provide scientific leadership, ideas for tests, expertise and manpower for running complex experiments. |
Collaborator Contribution | Access to unique world class synchrotron beam lines. |
Impact | Multi-disciplinary - engineering, physics, chemistry; use of X-ray scattering, spectroscopy, imaging |