Directed assembly of nanocrystals for tuneable semiconducting polymer composites
Lead Research Organisation:
Imperial College London
Department Name: Chemistry
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Organisations
People |
ORCID iD |
Saif Haque (Principal Investigator) | |
Jenny Nelson (Co-Investigator) |
Publications
Ding D
(2018)
Efficient Hybrid Solar Cells Based on Solution Processed Mesoporous TiO 2 /Tin(II) Sulfide Heterojunctions
in ACS Applied Energy Materials
Rath T
(2023)
Solution-Processable Cu3BiS3 Thin Films: Growth Process Insights and Increased Charge Generation Properties by Interface Modification.
in ACS applied materials & interfaces
Lanzetta L
(2017)
Two-Dimensional Organic Tin Halide Perovskites with Tunable Visible Emission and Their Use in Light-Emitting Devices
in ACS Energy Letters
Yang Y
(2017)
Emergent Properties of an Organic Semiconductor Driven by its Molecular Chirality
in ACS Nano
MacLachlan AJ
(2015)
Polymer/Nanocrystal Hybrid Solar Cells: Influence of Molecular Precursor Design on Film Nanomorphology, Charge Generation and Device Performance.
in Advanced functional materials
Aristidou N
(2015)
The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers.
in Angewandte Chemie (International ed. in English)
Matthews PD
(2018)
Black phosphorus with near-superhydrophobic properties and long-term stability in aqueous media.
in Chemical communications (Cambridge, England)
Rath T
(2015)
Formation of porous SnS nanoplate networks from solution and their application in hybrid solar cells.
in Chemical communications (Cambridge, England)
Bear JC
(2015)
Nanoparticle-sulphur "inverse vulcanisation" polymer composites.
in Chemical communications (Cambridge, England)
Brent JR
(2017)
Precursor determined lateral size control of monolayer MoS2 nanosheets from a series of alkylammonium thiomolybdates: a reversal of trend between growth media.
in Chemical communications (Cambridge, England)
Matthews PD
(2017)
Shining a light on transition metal chalcogenides for sustainable photovoltaics.
in Chemical science
Aziz A
(2019)
Understanding the Enhanced Stability of Bromide Substitution in Lead Iodide Perovskites
in Chemistry of Materials
Lewis E
(2015)
In Situ Synthesis of PbS Nanocrystals in Polymer Thin Films from Lead(II) Xanthate and Dithiocarbamate Complexes: Evidence for Size and Morphology Control
in Chemistry of Materials
Vaissier V
(2014)
Effect of Molecular Fluctuations on Hole Diffusion within Dye Monolayers
in Chemistry of Materials
Lewis E
(2016)
Diatom Frustules as a Biomineralized Scaffold for the Growth of Molybdenum Disulfide Nanosheets
in Chemistry of Materials
Mensah M
(2018)
Ricinoleic Acid as a Green Alternative to Oleic Acid in the Synthesis of Doped Nanocrystals
in ChemistrySelect
McNaughter PD
(2016)
The effect of alkyl chain length on the structure of lead(ii) xanthates and their decomposition to PbS in melt reactions.
in Dalton transactions (Cambridge, England : 2003)
Ezenwa TE
(2018)
Full compositional control of PbSxSe1-x thin films by the use of acylchalcogourato lead(ii) complexes as precursors for AACVD.
in Dalton transactions (Cambridge, England : 2003)
Bryant D
(2016)
Correction: Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells
in Energy & Environmental Science
Bryant D
(2016)
Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells
in Energy & Environmental Science
Hu Y
(2015)
Ruthenium Dyes with Azo Ligands: Light Harvesting, Excited-State Properties and Relevance to Dye-Sensitised Solar Cells
in European Journal of Inorganic Chemistry
Al-Shakban M
(2017)
Novel Xanthate Complexes for the Size-Controlled Synthesis of Copper Sulfide Nanorods.
in Inorganic chemistry
Boadi N
(2016)
The deposition of PbS and PbSe thin films from lead dichalcogenoimidophosphinates by AACVD
in Inorganica Chimica Acta
Matthews P
(2017)
Updating the road map to metal-halide perovskites for photovoltaics
in Journal of Materials Chemistry A
Pont S
(2017)
Tuning CH 3 NH 3 Pb(I 1-x Br x ) 3 perovskite oxygen stability in thin films and solar cells
in Journal of Materials Chemistry A
Aristidou N
(2017)
Insights into the increased degradation rate of CH 3 NH 3 PbI 3 solar cells in combined water and O 2 environments
in Journal of Materials Chemistry A
Prashanthan K
(2017)
Enhancement of hole mobility in hybrid titanium dioxide/poly(3-hexylthiophene) nanocomposites by employing an oligothiophene dye as an interface modifier
in Journal of Materials Chemistry C
Rath T
(2015)
Structural, optical and charge generation properties of chalcostibite and tetrahedrite copper antimony sulfide thin films prepared from metal xanthates.
in Journal of materials chemistry. A
Rath T
(2019)
Ligand-free preparation of polymer/CuInS2 nanocrystal films and the influence of 1,3-benzenedithiol on their photovoltaic performance and charge recombination properties.
in Journal of materials chemistry. C
Röhr JA
(2018)
Exploring the validity and limitations of the Mott-Gurney law for charge-carrier mobility determination of semiconducting thin-films.
in Journal of physics. Condensed matter : an Institute of Physics journal
Röhr JA
(2017)
On the correct interpretation of the low voltage regime in intrinsic single-carrier devices.
in Journal of physics. Condensed matter : an Institute of Physics journal
Kumar N
(2017)
Simultaneous topographical, electrical and optical microscopy of optoelectronic devices at the nanoscale.
in Nanoscale
Aristidou N
(2017)
Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells.
in Nature communications
Manke F
(2015)
Influence of a nearby substrate on the reorganization energy of hole exchange between dye molecules.
in Physical chemistry chemical physics : PCCP
Mokhtar MZ
(2017)
CH3NH3PbI3 films prepared by combining 1- and 2-step deposition: how crystal growth conditions affect properties.
in Physical chemistry chemical physics : PCCP
Röhr J
(2018)
Charge Transport in Spiro-OMeTAD Investigated through Space-Charge-Limited Current Measurements
in Physical Review Applied
McNaughter PD
(2017)
The in situ synthesis of PbS nanocrystals from lead(II) n-octylxanthate within a 1,3-diisopropenylbenzene-bisphenol A dimethacrylate sulfur copolymer.
in Royal Society open science
Vaissier V
(2016)
How mobile are dye adsorbates and acetonitrile molecules on the surface of TiO2 nanoparticles? A quasi-elastic neutron scattering study.
in Scientific reports
Wheeler S
(2017)
Transient Optoelectronic Analysis of the Impact of Material Energetics and Recombination Kinetics on the Open-Circuit Voltage of Hybrid Perovskite Solar Cells
in The Journal of Physical Chemistry C
Vaissier V
(2015)
Influence of Intermolecular Interactions on the Reorganization Energy of Charge Transfer between Surface-Attached Dye Molecules
in The Journal of Physical Chemistry C
Westbrook R
(2018)
Effect of Interfacial Energetics on Charge Transfer from Lead Halide Perovskite to Organic Hole Conductors
in The Journal of Physical Chemistry C
Lanzetta L
(2020)
Stability of Lead and Tin Halide Perovskites: The Link between Defects and Degradation.
in The journal of physical chemistry letters
Description | Hybrid organic-inorganic nanocomposites are attracting huge interest for range of applications such as solar cells, light emitting diodes and photonics. The ability to control the (i) structural morphology of the hybrid composite and (ii) interface function, are key challenges that have major implications for next generation optoelectronic devices. In this project, we focused on these tasks. Key highlights of this project are: 1) Development of a range of nanocrystal materials with tailored morphology and optical gap. 2) Improving the understanding of the interfacial energetics on electron and hole transfer in organic - inorganic semiconductor films. 3) Improved fundamental understanding of the factors influencing the stability of hybrid organic lead halide perovskite materials and solar cells. In particular, we have reported on the role of light and oxygen on the degradation of methyl ammonium lead triiodide perovskite films and devices. These findings are expected to impact fields beyond solar cells and will also be exploited in different areas, such as new nanomaterial-enabled technologies. |
Exploitation Route | The project team have continued to collaborate and have successfully obtained further EPSRC funding to work on hybrid solar cells and in particular perovskite devices. |
Sectors | Chemicals,Electronics,Energy,Environment |
Description | The finding have been used to publish a number of papers as indicated in this submission. The project team has continued to work together and collaborate and which has led to further EPSRC funding. |
First Year Of Impact | 2014 |
Sector | Energy,Environment |