High Resolution Biomedical Imaging Using Ultrasonic Metamaterials
Lead Research Organisation:
University of Leeds
Department Name: Electronic and Electrical Engineering
Abstract
Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.
Publications
Laureti S
(2020)
Trapped air metamaterial concept for ultrasonic sub-wavelength imaging in water.
in Scientific reports
Nie L
(2021)
A Metallic Additively Manufactured Metamaterial for Enhanced Monitoring of Acoustic Cavitation-Based Therapeutic Ultrasound
in Advanced Engineering Materials
Nie L
(2018)
Combining Acoustic Trapping With Plane Wave Imaging for Localized Microbubble Accumulation in Large Vessels.
in IEEE transactions on ultrasonics, ferroelectrics, and frequency control
Nie L
(2019)
High-Frame-Rate Contrast-Enhanced Echocardiography Using Diverging Waves: 2-D Motion Estimation and Compensation.
in IEEE transactions on ultrasonics, ferroelectrics, and frequency control
Description | Acoustic metamaterials constructed from conventional base materials can exhibit exotic phenomena not commonly found in nature, achieved by combining geometrical and resonance effects. However, the use of polymer-based metamaterials that could operate in water is difficult, due to the low acoustic impedance mismatch between water and polymers. In this project we have developed the concept of "trapped air" metamaterial, fabricated via vat photopolymerization, which makes ultrasonic sub-wavelength imaging in water using polymeric metamaterials highly effective. This concept is demonstrated for a holey-structured acoustic metamaterial in water at 200-300 kHz, via both finite element modelling and experimental measurements, but it can be extended to other types of metamaterials. The new approach, which outperforms the usual designs of these structures, indicates a way forward for exploiting additive-manufacturing for realising polymer-based acoustic metamaterials in water at ultrasonic frequencies for sub-wavelength imaging. |
Exploitation Route | Experimental validation is still progressing but we have demonstrated the use of rapid prototype manufacture processes in the design of metamaterials for sub-wavelength imaging. Imaging with metamaterials in water is problematic and this research presents a solution applicable to biomedical imaging. |
Sectors | Aerospace Defence and Marine Electronics Energy Healthcare Manufacturing including Industrial Biotechology Pharmaceuticals and Medical Biotechnology |
Description | Responsive Mode |
Amount | £830,216 (GBP) |
Funding ID | EP/N034813/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 12/2016 |
End | 11/2019 |
Description | High Resolution Biomedical Imaging Using Ultrasonic Metamaterials |
Organisation | University of Nottingham |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Leeds provide experimental and simulation expertise. |
Collaborator Contribution | Our partners at Nottingham provide materials, materials manufacture and rapid prototyping of metamaterials for acoustic characterization by Leeds and Warwick |
Impact | Publications are reported elsewhere in this award. |
Start Year | 2016 |