Made Smarter Innovation - Materials Made Smarter Research Centre
Lead Research Organisation:
University of Sheffield
Department Name: Materials Science and Engineering
Abstract
The Materials Made Smarter Centre has been co-created by Academia and Industry as a response to the pressing need to revolutionise the way we manufacture and value materials in our economy. The UK's ability to manufacture advanced materials underpins our ambitions to move towards cleaner growth and a more resource efficient economy. Innovation towards a net zero-carbon economy needs new materials with enhanced properties, performance and functionality and new processing technologies, with enhanced manufacturing capability, to make and deliver economic and societal benefit to the UK. However, significant technological challenges must still be overcome before we can benefit fully from the transformative technical and environmental benefits that new materials and manufacturing processes may bring. Our capacity to monitor and control material properties both during manufacture and through into service affect our ability to deliver a tailored and guaranteed performance that is 'right-first-time' and limit capacity to manage materials as assets through their lifetime. This reduces materials to the status of a commodity - a status which is both undeserved and unsustainable. Future materials intensive manufacturing needs to add greater value to the materials we use, be that through reduction of environmental impact, extension of product life or via enhanced functionality. Digitalisation of the materials thread will help to enhance their value by developing the tools and means to certify, monitor and control materials in-process and in-service improving productivity and stimulating new business models.
Our vision is to put the UK's materials intensive manufacturing industries at the forefront of the UK's technological advancement and green recovery from the dual impacts of COVID and rapid environmental change. We will develop the advanced digital technologies and tools to enable the verification, validation, certification and traceability of materials manufacturing and work with partners to address the challenges of digital adoption. Digitisation of the materials thread will drive productivity improvements in materials intensive industries, realise new business models and change the way we value and use materials.
Our vision is to put the UK's materials intensive manufacturing industries at the forefront of the UK's technological advancement and green recovery from the dual impacts of COVID and rapid environmental change. We will develop the advanced digital technologies and tools to enable the verification, validation, certification and traceability of materials manufacturing and work with partners to address the challenges of digital adoption. Digitisation of the materials thread will drive productivity improvements in materials intensive industries, realise new business models and change the way we value and use materials.
Organisations
- University of Sheffield (Lead Research Organisation)
- German Aerospace Centre (DLR) (Collaboration)
- Rolls Royce Group Plc (Collaboration)
- UNIVERSITY OF GREENWICH (Collaboration)
- Australian Nuclear Science and Technology Organisation (Collaboration)
- Ford Motor Company (United Kingdom) (Collaboration)
- European Space Agency (Collaboration)
- UNIVERSITY OF SYDNEY (Collaboration)
- University College London (Collaboration)
- European Synchrotron Radiation Facility (Collaboration)
- Horiba (Collaboration)
- OXFORD BROOKES UNIVERSITY (Collaboration)
- NUCLEAR ADVANCED MANUFACTURING RESEARCH CENTRE (Collaboration)
- IPG Photonics (UK) Limited (Collaboration)
- BRUNEL UNIVERSITY LONDON (Collaboration)
- National University of Singapore (Collaboration)
- Pro Steel Engineering (Project Partner)
- Materials Processing Institute (MPI) (Project Partner)
- Sheffield City Region (Project Partner)
- Seco Tools (Project Partner)
- Knowledge Transfer Network KTN (Project Partner)
- Celsa Steel UK (Project Partner)
- National Composites Centre (Project Partner)
- Rolls-Royce (United Kingdom) (Project Partner)
- Diamond Light Source (Project Partner)
- The Alan Turing Institute (Project Partner)
- Science and Technology Facilities Council (Project Partner)
- ADVANCED MANUFACTURING RESEARCH CENTRE (Project Partner)
- Gestamp Tallent Ltd (Project Partner)
- ESI (United Kingdom) (Project Partner)
- Ferroday (United Kingdom) (Project Partner)
- Alloyed Limited (Project Partner)
- Constellium (United Kingdom) (Project Partner)
- Tata Group UK (Project Partner)
- Manufacturing Technology Centre (United Kingdom) (Project Partner)
Publications
Newton T
(2021)
Machine Learning for Sensor Transducer Conversion Routines
Ma S
(2022)
Additive Manufacturing Enabled Synergetic Strengthening of Bimodal Reinforcing Particles for Aluminum Matrix Composites
in SSRN Electronic Journal
Freeman F
(2022)
Multi-faceted monitoring of powder flow rate variability in directed energy deposition
in Additive Manufacturing Letters
Muller F
(2022)
Modelling and predictions of time-dependent local stress distributions around cracks under dwell loading in a nickel-based superalloy at high temperatures
in International Journal of Fatigue
Gao Z
(2022)
Additively manufactured high-energy-absorption metamaterials with artificially engineered distribution of bio-inspired hierarchical microstructures
in Composites Part B: Engineering
Anderson M
(2022)
An assessment of statistical models of competitive growth during transient Ostwald ripening in turbine disc nickel-based superalloys
in Modelling and Simulation in Materials Science and Engineering
Sinclair L
(2022)
Sinter formation during directed energy deposition of titanium alloy powders
in International Journal of Machine Tools and Manufacture
| Description | 2023-2024 Update MMSC focussed on continual development of robust digitally-led approaches to guide manufacturing technologies. The Centre has engaged with industrialists to define future scenarios for how these technologies will impact the way manufacturing is conducted and their impact on both the businesses and the skills required by the work force. Our interdisciplinary team of researchers from across the Hub, are developing new tools, insights and applications for advanced powder processing technologies (AM) - working closely with Industry and our University and Innovation partners to translate our work from the lab to application. To enable this smooth transition, we have several aligned research projects to MMSC ranging from collaborative R&D programmes supported by ATI and Innovate UK as well as training, through Industrially supported PhD the next generation of engineers for the sector. Highlights include: - A paid for trial of a web-based modelling platform developed - Novel process replicators, that probe advanced powder processes at high temporal and spatial resolution have uncovered new fundamental process understanding - for manufacture and repair of critical components, at the Diamond synchrotron. These critical insights are feeding into process models and metrology work in both high pressure die-casting and additive manufacturing - Machine learning and control researchers have developed data driven approaches to predict 'printability' in AM and worked with industry partners to solve issues of rapid defect identification and correction in AM systems - A two phase model, that accounts for the underlying differences occurring during cooling to coiling of strip steel products - A Machine-learning based model for texture predictions for high pressure die casting - A machine learning model for forecasting of hot metal silicon content in a blast furnace. During MMSC we demonstrated that in the case of AM that the MMSC approach of hybrid data driven and computational modelling approaches for process definition and control reduces the process failure rate and increases the efficiency of manufacture. We have now begun to demonstrate that in-process monitoring can assist in understanding in-service performance and will extend this to developing through life models for materials manufactured. |
| Exploitation Route | We have a portfolio of aligned projects with commercial and catapult partners to developments to higher Technology Readiness Level (TRL), funded by industry, Innovate UK and Aerospace Technologies Institute (see Narrative Impact). |
| Sectors | Aerospace Defence and Marine Digital/Communication/Information Technologies (including Software) Energy Manufacturing including Industrial Biotechology |
| Description | - Work performed at the Diamond Light Source in creating 'physical twins' has led to Performance-driven design of aluminium alloys for additive manufacturing (PAAM, £335,213), Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM, £399,163), Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing (TEAM, £331,295), and Manufacturing by Design. The digitalisation of manufacturing technologies has also progressed and supported by large industrial partners e.g. ATI (Aerospace Technology Institute) with Boeing, Renishaw and Alloyed (£13,990,000) as well as new collaborators in space applications through ESA (European Space Agency) on enabling active control of surface roughness during advanced manufacturing using laser pulse shaping technologies, and UKSA (UK Space Agency), in collaboration with Wayland Additive and MARS ltd., on electric Propulsion Innovations for Space and Electron Beam Manufacturing. Spinoff activity on digital technologies has progressed into two distinct opportunities; one exploring advanced design and monitoring tools for AM, which has received ICURe funding for market research activities and drafting patent documents to protect core IP. The second, a web-based and physics-based modelling platform, which has received funding (£10,000), permitting access for trial assessment. |
| First Year Of Impact | 2023 |
| Sector | Aerospace, Defence and Marine,Construction,Energy,Manufacturing, including Industrial Biotechology |
| Impact Types | Societal Economic |
| Description | 2022 University College London - University of Toronto Joint Call for Collaborative Projects in the Emerging Global Talents stream - Additive Manufacturing of Lightweight Metallic Materials |
| Amount | $20,000 (CAD) |
| Organisation | University of Toronto |
| Sector | Academic/University |
| Country | Canada |
| Start | 12/2022 |
| End | 12/2023 |
| Description | CLA Leung - International SDG Collaboration Program - Solid-State Additive Manufacturing For Recycled Aluminium Alloys |
| Amount | £172,490 (GBP) |
| Organisation | United Nations (UN) |
| Sector | Public |
| Country | United States |
| Start | 05/2022 |
| End | 06/2023 |
| Description | CLA Leung - Studentship with the STFC Scientific Machine Learning group: 'Application Of Machine-learning And Sensing Technologies On Additive Manufacturing (ML4AM)' |
| Amount | £100,000 (GBP) |
| Organisation | Science and Technologies Facilities Council (STFC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 08/2023 |
| End | 08/2026 |
| Description | CLAL Leung - CA studentship - Impact of powder quality on laser powder bed fusion process |
| Amount | £60,000 (GBP) |
| Organisation | Carpenter Technology Corporation |
| Department | Carpenter Additive |
| Sector | Private |
| Country | United States |
| Start | 08/2022 |
| End | 09/2026 |
| Description | DTP Harry Chapman |
| Amount | £90,000 (GBP) |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 08/2022 |
| End | 09/2026 |
| Description | Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
| Amount | £399,163 (GBP) |
| Funding ID | EP/W037483/1 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 11/2022 |
| End | 10/2025 |
| Description | Digital qualification Platform for Advanced Alloy Components |
| Amount | £13,893,451 (GBP) |
| Organisation | Aerospace Technology Institute |
| Sector | Charity/Non Profit |
| Country | United Kingdom |
| Start | 01/2023 |
| End | 12/2026 |
| Description | Digitisation of Powder Manufacturing |
| Amount | £46,522 (GBP) |
| Organisation | Henry Royce Institute |
| Sector | Academic/University |
| Country | United Kingdom |
| Start | 01/2022 |
| End | 03/2023 |
| Description | Establishing a Foundation for Artificial Intelligence in Additive Manufacturing |
| Amount | £88,480 (GBP) |
| Funding ID | 178761 |
| Organisation | Henry Royce Institute |
| Sector | Academic/University |
| Country | United Kingdom |
| Start | 03/2023 |
| End | 03/2024 |
| Description | ICURe Discover |
| Amount | £20,000 (GBP) |
| Organisation | Innovate UK |
| Sector | Public |
| Country | United Kingdom |
| Start | 03/2023 |
| End | 09/2023 |
| Description | ICURe Explore |
| Amount | £300,000 (GBP) |
| Organisation | Innovate UK |
| Sector | Public |
| Country | United Kingdom |
| Start | 03/2024 |
| End | 09/2024 |
| Description | Industrial CASE Account - University of Liverpool 2021 |
| Amount | £536,525 (GBP) |
| Funding ID | EP/W522193/1 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 08/2021 |
| End | 09/2026 |
| Description | Industrial Cooperative Awards in Science & Technology (iCASE) studentship with EPSRC/Renishaw |
| Amount | £129,000 (GBP) |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 09/2021 |
| End | 09/2025 |
| Description | Manufacturing by Design |
| Amount | £1,612,580 (GBP) |
| Funding ID | EP/W003333/1 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 03/2022 |
| End | 09/2027 |
| Description | Materials 4.0 - Digitisation of Powder Manufacturing - DoPoM |
| Amount | £32,018 (GBP) |
| Organisation | Henry Royce Institute |
| Sector | Academic/University |
| Country | United Kingdom |
| Start | 05/2021 |
| End | 03/2022 |
| Description | Novel AM processing: for new functionally graded microstructure materials |
| Amount | £66,946 (GBP) |
| Funding ID | 183011 |
| Organisation | Henry Royce Institute |
| Sector | Academic/University |
| Country | United Kingdom |
| Start | 07/2023 |
| End | 08/2024 |
| Description | Performance-driven design of Aluminium alloys for Additive Manufacturing (PAAM) |
| Amount | £358,183 (GBP) |
| Funding ID | EP/W006154/1 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 01/2023 |
| End | 07/2026 |
| Description | Performance-driven design of aluminium alloys for additive manufacturing (PAAM) |
| Amount | £335,214 (GBP) |
| Funding ID | EP/W006774/1 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 03/2023 |
| End | 04/2026 |
| Description | Physics-based Modelling of Microstructure Evolution in High-strength 6xxx Aluminium Alloys: |
| Amount | £88,862 (GBP) |
| Funding ID | 2742066 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 08/2022 |
| End | 09/2026 |
| Description | Prediction of Engineering Properties of Thermomechanically Treated Aluminium Alloys. Prof. Hamid Assadi Brunel Centre for Advanced Solidification Tech |
| Amount | £87,696 (GBP) |
| Funding ID | 2625243 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 01/2021 |
| End | 12/2024 |
| Description | Rolls Royce: Advanced Application Of External Fields To DED Additive Manufacturing - Chapman |
| Amount | £40,000 (GBP) |
| Organisation | Rolls Royce Group Plc |
| Sector | Private |
| Country | United Kingdom |
| Start | 09/2022 |
| End | 09/2026 |
| Description | Rolls Royce: In-situ Synchrotron X-ray Investigation Of Blown-powder Laser Additive Manufacturing Of Nickel Superalloys - Cowley |
| Amount | £5,000 (GBP) |
| Organisation | Rolls Royce Group Plc |
| Sector | Private |
| Country | United Kingdom |
| Start | 09/2022 |
| End | 09/2024 |
| Description | Royce Collaboration Programme - Alloyed |
| Amount | £63,960 (GBP) |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | |
| Description | Sheffield University - Feasibility Study - Digitalisation of Powder Processes => Directed Energy Deposition modular sensing and data framework |
| Amount | £26,985 (GBP) |
| Organisation | Henry Royce Institute |
| Sector | Academic/University |
| Country | United Kingdom |
| Start | 12/2021 |
| End | 03/2022 |
| Description | Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing (TEAM) |
| Amount | £451,915 (GBP) |
| Funding ID | EP/W032147/1 |
| Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
| Sector | Public |
| Country | United Kingdom |
| Start | 01/2023 |
| End | 08/2026 |
| Description | Unlocking the potential of laser 3D printing with ultrasound |
| Amount | € 212,934 (EUR) |
| Organisation | European Commission H2020 |
| Sector | Public |
| Country | Belgium |
| Start | 08/2022 |
| End | 08/2024 |
| Title | Dataset for 'Contextual Resources and Digital Attitudes (CResDA) Supporting Technology Adoption: Measurement and Conceptual Validation' |
| Description | This dataset is the cleaned-up dataset for our paper 'Contextual Resources and Digital Attitudes (CResDA) Supporting Technology Adoption: Measurement and Conceptual Validation'. To understand how to work with this datafile, please consult the attached README.txt document. |
| Type Of Material | Database/Collection of data |
| Year Produced | 2023 |
| Provided To Others? | Yes |
| URL | https://orda.shef.ac.uk/articles/dataset/Dataset_for_Contextual_Resources_and_Digital_Attitudes_CRes... |
| Description | A collaboration with The University of Sheffield Advanced Manufacturing Research Centre (AMRC) to acquire selective laser melting data and its corresponding X-ray computed tomography scans |
| Organisation | Nuclear Advanced Manufacturing Research Centre |
| Country | United Kingdom |
| Sector | Charity/Non Profit |
| PI Contribution | A collaboration with The University of Sheffield Advanced Manufacturing Research Centre (AMRC) to acquire selective laser melting data and its corresponding X-ray computed tomography scans. Collaboration with ACSE. |
| Collaborator Contribution | A collaboration with The University of Sheffield Advanced Manufacturing Research Centre (AMRC) to acquire selective laser melting data and its corresponding X-ray computed tomography scans |
| Impact | A collaboration with The University of Sheffield Advanced Manufacturing Research Centre (AMRC) to acquire selective laser melting data and its corresponding X-ray computed tomography scans |
| Start Year | 2022 |
| Description | Australian Nuclear Science and Technology Organisation (ANSTO) / University of Sydney |
| Organisation | Australian Nuclear Science and Technology Organisation |
| Country | Australia |
| Sector | Public |
| PI Contribution | Analysis of friction stirred additive manufacturing |
| Collaborator Contribution | Provision of friction stirred additive manufacturing specimens |
| Impact | None identified yet, due to recent commencement of the activity |
| Start Year | 2023 |
| Description | Australian Nuclear Science and Technology Organisation (ANSTO) / University of Sydney |
| Organisation | University of Sydney |
| Country | Australia |
| Sector | Academic/University |
| PI Contribution | Analysis of friction stirred additive manufacturing |
| Collaborator Contribution | Provision of friction stirred additive manufacturing specimens |
| Impact | None identified yet, due to recent commencement of the activity |
| Start Year | 2023 |
| Description | DLR/ESRF |
| Organisation | European Synchrotron Radiation Facility |
| Country | France |
| Sector | Charity/Non Profit |
| PI Contribution | Experiments and and analysis on a beamtime study pore characteristics on AM sample using holotomography |
| Collaborator Contribution | Financial support of the experimental program |
| Impact | Experimental results and analysis to support DLR research and development |
| Start Year | 2022 |
| Description | DLR/ESRF |
| Organisation | German Aerospace Centre (DLR) |
| Country | Germany |
| Sector | Public |
| PI Contribution | Experiments and and analysis on a beamtime study pore characteristics on AM sample using holotomography |
| Collaborator Contribution | Financial support of the experimental program |
| Impact | Experimental results and analysis to support DLR research and development |
| Start Year | 2022 |
| Description | Rolls Royce 1 day workshop at RDC with MAPP and Manchester University |
| Organisation | Rolls Royce Group Plc |
| Country | United Kingdom |
| Sector | Private |
| PI Contribution | Dr Chris Heason and Martyn Jones - 1 day Workshop at RDC with Manchester & MAPP |
| Collaborator Contribution | Dr Chris Heason and Martyn Jones - 1 day Workshop at RDC with Manchester & MAPP |
| Impact | Dr Chris Heason and Martyn Jones - 1 day Workshop at RDC with Manchester & MAPP |
| Start Year | 2023 |
| Description | Rolls Royce AM PDRA |
| Organisation | Rolls Royce Group Plc |
| Country | United Kingdom |
| Sector | Private |
| PI Contribution | PDRA in AM developing rapid qualification techniques for aerospace components |
| Collaborator Contribution | Providing knowledge and experience of qualification approaches |
| Impact | None identified yet, due to recent start |
| Start Year | 2022 |
| Description | Rolls Royce Process Modelling |
| Organisation | Rolls Royce Group Plc |
| Country | United Kingdom |
| Sector | Private |
| PI Contribution | Academic support to industrialise the microstructure-dependent inertia friction welding process modelling tool 'µ-iWeld'. Specifically, extended functionality is required related to informing controlling mechanisms and manufacturing variables influencing the weldability and quality of Nickel alloys welds, with focus on alloy RR1073. |
| Collaborator Contribution | Provision of data sets used to develop and validate the academic models generated. |
| Impact | No outputs yet, program has only recently just commenced |
| Start Year | 2023 |
| Description | Rolls Royce visit to Sheffield University (Future sustainable materials research discussions) |
| Organisation | Rolls Royce Group Plc |
| Country | United Kingdom |
| Sector | Private |
| PI Contribution | Neil Glover - 1 day at Sheffield for discussions on future sustainable materials research |
| Collaborator Contribution | Neil Glover - 1 day at Sheffield for discussions on future sustainable materials research |
| Impact | Neil Glover - 1 day at Sheffield for discussions on future sustainable materials research |
| Start Year | 2023 |
| Description | Rolls Royce visit to Sheffield University (PhD Discussions) |
| Organisation | Rolls Royce Group Plc |
| Country | United Kingdom |
| Sector | Private |
| PI Contribution | Dr Mark Hardy - 1 day at Sheffield for PhD discussions with MAPP-aligned PhD students |
| Collaborator Contribution | Dr Mark Hardy - 1 day at Sheffield for PhD discussions with MAPP-aligned PhD students |
| Impact | Dr Mark Hardy - 1 day at Sheffield for PhD discussions with MAPP-aligned PhD students |
| Start Year | 2023 |
| Description | Rolls Royce visits to Sheffield University (Powder Ti Research in repair) |
| Organisation | Rolls Royce Group Plc |
| Country | United Kingdom |
| Sector | Private |
| PI Contribution | Martyn Jones - 2 x 1 days at Sheffield for discussions on powder titanium research in repair. |
| Collaborator Contribution | Martyn Jones - 2 x 1 days at Sheffield for discussions on powder titanium research in repair. |
| Impact | Martyn Jones - 2 x 1 days at Sheffield for discussions on powder titanium research in repair. |
| Start Year | 2023 |
| Description | UCL and Anna Paradowska, University of Sydney/ANSTO collaboration |
| Organisation | Australian Nuclear Science and Technology Organisation |
| Country | Australia |
| Sector | Public |
| PI Contribution | Joint project - Solid-State Additive Manufacturing For Recycled Aluminium Alloys |
| Collaborator Contribution | Joint project - Solid-State Additive Manufacturing For Recycled Aluminium Alloys |
| Impact | Paper submitted |
| Start Year | 2023 |
| Description | UCL and DLR and ESRF consortium collaboration |
| Organisation | European Synchrotron Radiation Facility |
| Country | France |
| Sector | Charity/Non Profit |
| PI Contribution | Provide expertise and research support on nano/holotomography of AM Al alloys under heat treatment. |
| Collaborator Contribution | Provide expertise and support on nano/holotomography of AM Al alloys under heat treatment. |
| Impact | No output yet. |
| Start Year | 2022 |
| Description | UCL and DLR and ESRF consortium collaboration |
| Organisation | German Aerospace Centre (DLR) |
| Country | Germany |
| Sector | Public |
| PI Contribution | Provide expertise and research support on nano/holotomography of AM Al alloys under heat treatment. |
| Collaborator Contribution | Provide expertise and support on nano/holotomography of AM Al alloys under heat treatment. |
| Impact | No output yet. |
| Start Year | 2022 |
| Description | UCL and Ford, Brunel University London, Oxford Brookes University collaboration |
| Organisation | Brunel University London |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
| Collaborator Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
| Impact | No output yet. |
| Start Year | 2023 |
| Description | UCL and Ford, Brunel University London, Oxford Brookes University collaboration |
| Organisation | Ford Motor Company |
| Country | United States |
| Sector | Private |
| PI Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
| Collaborator Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
| Impact | No output yet. |
| Start Year | 2023 |
| Description | UCL and Ford, Brunel University London, Oxford Brookes University collaboration |
| Organisation | Oxford Brookes University |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
| Collaborator Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
| Impact | No output yet. |
| Start Year | 2023 |
| Description | UCL and Horiba collaboration |
| Organisation | Horiba |
| Country | Japan |
| Sector | Private |
| PI Contribution | Provide expertise and research support on applications of XRF in advanced manufacturing research. |
| Collaborator Contribution | Provide expertise and industrial support on applications of XRF in advanced manufacturing research. |
| Impact | No output yet. |
| Start Year | 2022 |
| Description | UCL and Horiba collaboration |
| Organisation | University College London |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | Provide expertise and research support on applications of XRF in advanced manufacturing research. |
| Collaborator Contribution | Provide expertise and industrial support on applications of XRF in advanced manufacturing research. |
| Impact | No output yet. |
| Start Year | 2022 |
| Description | UCL and IPG Photonics collaboration |
| Organisation | IPG Photonics (UK) Limited |
| Country | United Kingdom |
| Sector | Private |
| PI Contribution | Provide expertise and research support. |
| Collaborator Contribution | Provide materials and expertise. |
| Impact | No output yet. |
| Start Year | 2022 |
| Description | UCL and IPG Photonics collaboration |
| Organisation | University College London |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | Provide expertise and research support. |
| Collaborator Contribution | Provide materials and expertise. |
| Impact | No output yet. |
| Start Year | 2022 |
| Description | UCL and Michael Mallon, Gian Lorenzo Casini and Miguel Yagues Palazon from European Space Agency collaboration |
| Organisation | European Space Agency |
| Department | Harwell Centre |
| Country | United Kingdom |
| Sector | Public |
| PI Contribution | Joint project - Enable active control of surface roughness during advanced manufacturing using laser pulse shaping technologies |
| Collaborator Contribution | Joint project - Enable active control of surface roughness during advanced manufacturing using laser pulse shaping technologies |
| Impact | Joint PDRA Anastassia Milleret hired. |
| Start Year | 2024 |
| Description | UCL and University of Greenwich collaboration |
| Organisation | University College London |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | Joint research on Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing |
| Collaborator Contribution | Joint research on Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing |
| Impact | No output yet. |
| Start Year | 2023 |
| Description | UCL and University of Greenwich collaboration |
| Organisation | University of Greenwich |
| Country | United Kingdom |
| Sector | Academic/University |
| PI Contribution | Joint research on Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing |
| Collaborator Contribution | Joint research on Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing |
| Impact | No output yet. |
| Start Year | 2023 |
| Description | UCL and Wentao Yan, National University of Singapore collaboration |
| Organisation | National University of Singapore |
| Country | Singapore |
| Sector | Academic/University |
| PI Contribution | Provide expertise on AM experiment and data analytics. |
| Collaborator Contribution | Provide expertise on AM modelling. |
| Impact | No output yet. |
| Start Year | 2023 |
| Description | 2022 Workshop on Artificial Intelligence in Additive Manufacturing with MAPP and CAM2 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Postgraduate students |
| Results and Impact | Phillip Stanley-Marbell gave a talk titled "Data-Driven Materials Design and Control - Computational Physics in AM" |
| Year(s) Of Engagement Activity | 2022 |
| Description | 2022 Workshop on Artificial Intelligence in Additive Manufacturing with MAPP and CAM2 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Postgraduate students |
| Results and Impact | Felicity Freeman gave a talk titled "Control in Directed Energy Deposition (BeAM)" |
| Year(s) Of Engagement Activity | 2022 |
| Description | 2022 Workshop on Artificial Intelligence in Additive Manufacturing with MAPP and CAM2 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Postgraduate students |
| Results and Impact | Rob Snell gave a talk titled "Towards Parameterless AM" |
| Year(s) Of Engagement Activity | 2022 |
| Description | AAMS Conference - Madrid, Presentation by Oli Dew |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Professional Practitioners |
| Results and Impact | Oli Dew talk: "Manufacturing and producing nano-scale accurate surfaces in additive manufacturing" |
| Year(s) Of Engagement Activity | 2023 |
| URL | https://aams2023.com/ |
| Description | ACM5 Conference |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | ACM5 conference presentation "Developing a Testbed For Automated Fibre Placement Technologies" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.nccuk.com/events/acm5-2022-fifth-international-symposium-on-automated-composites-manufac... |
| Description | ASTM ICAM 2022 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | A. Leung invited Talk at ASTM ICAM 2022, "Application of in situ X-ray imaging of metal powders, powder bed fusion processes and manufactured components" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://amcoe.org/event/icam2022/ |
| Description | Action Planning Workshop |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | Regional |
| Primary Audience | Industry/Business |
| Results and Impact | Development of action plans for how future scenario (performance on demand) could be reached. |
| Year(s) Of Engagement Activity | 2022 |
| Description | Additive International Conference |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | I. Todd presentation on "Seeing opportunity in adversity, how AM can deliver innovative solutions" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.additiveinternational.com |
| Description | Advanced Metallics Systems CDT Summer School |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Postgraduate students |
| Results and Impact | B. Thomas invited to talk at Advanced Metallic systems CDT Summer School: "Data Workflows in Materials" |
| Year(s) Of Engagement Activity | 2022 |
| Description | BT - Networking at Formnext Additive Manufacturing Industrial Expo |
| Form Of Engagement Activity | Participation in an open day or visit at my research institution |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | Networking and market research at Formnext 2023 |
| Year(s) Of Engagement Activity | 2023 |
| Description | C.L.A. Leung and K. Kim were invited to give a talk at the Carpenter Additive, Widnes |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | Local |
| Primary Audience | Industry/Business |
| Results and Impact | 3 - 4 researchers attended to discuss and share the latest work related on the impact of powder oxidation on Additive Manufacturing, which sparked questions and discussion afterwards. |
| Year(s) Of Engagement Activity | 2023 |
| Description | C.L.A. Leung hosted an academic visit/knowledge exchange workshop with Dr. Wentao Yan from National University of Singapore, Singapore, Research Complex at Harwell, Harwell Campus |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | Local |
| Primary Audience | Postgraduate students |
| Results and Impact | Organised a knowledge exchange workshop on multiscale modelling of AM with Dr. Wentao Yan from National University of Singapore, Singapore. >20 early career researchers attended the workshop, which sparked questions and discussion afterwards in related subject areas. |
| Year(s) Of Engagement Activity | 2023 |
| Description | C.L.A. Leung hosted the 'IOM3 Road to Professional Membership and Chartership event' with UKRI RCaH, IOM3, and Renishaw plc. |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Professional Practitioners |
| Results and Impact | I co-host the upcoming event: 'Road to professional membership and chartership' with the Research Complex at Harwell, IOM3 (Institute of Materials, Minerals & Mining), UCL, and Renishaw. If you want to find answers to any of the following questions, please come along to our in person event at Harwell campus (29th Nov 2023). We have got an excellent line-up of speakers, e.g. Ms Sarah Boad, Dr. Sarah Glanvill, and Prof. Mark Miodownik. The goal is to showcase professional practitioners to learn more about the following areas: ? Are you interested in joining a professional body or the benefits of being a member of one? ? Do you want to join the Institute of Materials, Minerals, and Mining (IOM3)? ? Do you know how being chartered could benefit your career? ? Do you know the process for becoming chartered? ? Do you even know what chartership is? |
| Year(s) Of Engagement Activity | 2023 |
| URL | https://www.rc-harwell.ac.uk/events/road-professional-membership-and-chartership |
| Description | CAM2/MAPP AI Workshop |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Professional Practitioners |
| Results and Impact | "This joint workshop will focus on this research and the opportunities that the digitalisation of the AM process offers and the continuing research challenges that it presents. The workshop will cover the following topics: Quality Assurance and Sensors for AM - including thermal, hyperspectral, audio AI/ML and physically-based modelling for AM Ground Truth in AM processes Digital qualification of processes and materials" |
| Year(s) Of Engagement Activity | 2021 |
| URL | https://mapp.ac.uk/events/workshop-on-artificial-intelligence-in-additive-manufacture-joint-cam2-and... |
| Description | CG Presentation at Royce Institute Conference |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Postgraduate students |
| Results and Impact | Presentation entitled "Industrial AI: opportunities and challenges in Steel Manufacturing" at The Royce Institute Conference |
| Year(s) Of Engagement Activity | 2023 |
| Description | CLA Leung and PD Lee, Invited Talk at virtual seminar for academic and industry in Ireland |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | CLA Leung and PD Lee, Invited Talk at virtual seminar for academic and industry in Ireland, "Quantify melt pool and defect dynamics during additive manufacturing using physical twin coupled with X-ray imaging and digital twins", Ireland, January 2023 |
| Year(s) Of Engagement Activity | 2023 |
| Description | CLA Leung talk at AMRC |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | C L A Leung talk at AMRC (University of Sheffield Advanced Manufacturing Research Centre) "Progress towards intelligent manufacturing", UK |
| Year(s) Of Engagement Activity | 2023 |
| Description | CLA Leung talk at Centre for Artificial Intelligence and Robotics (CAIR) Hong Kong Institute of Science & Innovation |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | C L A Leung talk at Centre for Artificial Intelligence and Robotics (CAIR) Hong Kong Institute of Science & Innovation (Chinese Academy of Sciences), Hong Kong |
| Year(s) Of Engagement Activity | 2023 |
| Description | CLA Leung talk for Additive Manufacturing Defects |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | CLA Leung invited talk at Ulster University "Quantify melt pool and defect dynamics during additive manufacturing using physical twin coupled with X-ray imaging and digital twins" , Ulster |
| Year(s) Of Engagement Activity | 2023 |
| Description | CLA Leung, Invited Talk at virtual seminar series, Wuhan University of Technology |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | CLA Leung, Invited Talk at virtual seminar series, Wuhan University of Technology, "A journey to data-driven reliable efficient additive manufacturing (DREAM)", Wuhan, China, July 2022 |
| Year(s) Of Engagement Activity | 2022 |
| Description | CRC/TRR 270 Colloquium 2022 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Professional Practitioners |
| Results and Impact | AA. Leung invited Talk at CRC/TRR 270 Coloquium, "My journey to data-driven reliable efficient additive manufacturing (My DREAM)" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.tu-darmstadt.de/sfb270/about_crc/talks_1/index.en.jsp |
| Description | Cambridge Engineering - Modelling |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | Local |
| Primary Audience | Undergraduate students |
| Results and Impact | H. Basoalto invited to present to Cambridge Engineering Department on Emerging Modelling Approaches |
| Year(s) Of Engagement Activity | 2022 |
| Description | Cold Roll RUL KES Conference 2022 |
| Form Of Engagement Activity | A formal working group, expert panel or dialogue |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | C. Giannetti presentation "Data modelling and Remaining Useful Life estimation of rolls in a steel making cold rolling process" |
| Year(s) Of Engagement Activity | 2022 |
| URL | http://kes2022.kesinternational.org |
| Description | Composite Technology Pull Through Workshop |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | Workshop establishing technologies which would benefit from direct action on pull-through. |
| Year(s) Of Engagement Activity | 2022 |
| Description | DSTL Modelling Event |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | H. Basoalto presentation on "Crystal Plasticity Modelling" |
| Year(s) Of Engagement Activity | 2022 |
| Description | Digital Manufacturing Week Innovation Theatre |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | I. Todd Presentation overview of Materials Made Smarter Centre and examples of recent developments |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.mandeweek.co.uk/manufacturing-expo-home |
| Description | Dr Ben Thomas presented at ISCMM22 (the 13th Annual International Student Conference in Metallic Materials), in Dublin. |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Postgraduate students |
| Results and Impact | Dr Ben Thomas presented on "Data Workflows in Materials". |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.sheffield.ac.uk/metallicscdt/news/13th-annual-international-student-conference-metallic-... |
| Description | EPSRC ECR Manufacturing Forum |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Postgraduate students |
| Results and Impact | C. Giannetti invited to talk to the EPSRC Early Careers Manufacturing Forum "Deep Learning for Smart Manufacturing: challenges and opportunities" |
| Year(s) Of Engagement Activity | 2023 |
| Description | HB - Airbus Workshop |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | Participated in Airbus organised workshop on Additive Manufacturing |
| Year(s) Of Engagement Activity | 2023 |
| Description | Hosted Visit of Welsh Automotive Forum |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | Hosted and presented to The Welsh Autmotive Forum, entitled "improved efficiencies and Competitiveness via Industry 4.0" |
| Year(s) Of Engagement Activity | 2023 |
| Description | Interview with Primary Engineer |
| Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Schools |
| Results and Impact | A. Leung interviewed by the Primary Engineer Programme, 'If you were an ENGINEER, what would you do?" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.primaryengineer.com |
| Description | Invited Talk - Rolls Royce |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | Invited presentation at Rolls Royce "Future 50Forum", titled "Reimaging Materials and Manufacturing Together" |
| Year(s) Of Engagement Activity | 2023 |
| Description | Invited talk to UK ACerS (UK Chapter of American Ceramics Society) |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | H. Basolato presented on the increasing capability of materials modelling approaches applied in metallic systems, which could be applied to ceramic systems. |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://ceramics.org/members/member-communities/international-chapters/united-kingdom-chapter |
| Description | KL Poster at Faculty of Science PGR Conference |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | Local |
| Primary Audience | Postgraduate students |
| Results and Impact | Poster Presentation at Faculty of Science PGR Conference |
| Year(s) Of Engagement Activity | 2023 |
| Description | KL Presentation at International Conference on Knowledge-based and Intelligent Information & Engineerign Systems |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Other audiences |
| Results and Impact | Presentation entitled "Hybrid Modelling Approach Based on Deep Learning for the Prediction of the Silicon Content in the Blast Furnace" at the 27th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems. |
| Year(s) Of Engagement Activity | 2023 |
| Description | MAPP 2nd International Conference - Presentation by Hamid Toshani |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Professional Practitioners |
| Results and Impact | Hamid Toshani talk: The in-powder miniature sense-and-compute platform |
| Year(s) Of Engagement Activity | 2023 |
| URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
| Description | MMSC Digital Change Toolkit Workshop |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | MMSC Organisation workshop - The Materials Made Smarter Centre's "People-centred Transformation" - exploring the impact of digital technologies on the future of materials manufacturing. This workshop presents the Digital Change Toolkit. |
| Year(s) Of Engagement Activity | 2023 |
| Description | MMSC Digital Materials Passport Workshop |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | MMSC Organised Workshop - The Materials Made Smarter Centre's "Future of Materials" Series - exploring the impact of digital technologies on the future of materials manufacturing. This workshop is exploring the Digital Materials Passport. |
| Year(s) Of Engagement Activity | 2023 |
| Description | MMSC Performance on Demand Workshop |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | MMSC Organised Workshop - The Materials Made Smarter Centre's "Future of Materials" Series - exploring the impact of digital technologies on the future of materials manufacturing. This workshop is exploring Performance on Demand. |
| Year(s) Of Engagement Activity | 2023 |
| Description | MTC Physics Based Modelling |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | H. Basoalto presentation on Physics Based Modelling to the MTC |
| Year(s) Of Engagement Activity | 2022 |
| Description | Made Smarter Innovation Seminar |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | I. Todd, C. Giannetti, H. Basoalto, C. Axtell presented Made Smarter Innovation Webinar "An introduction to Materials Made Smarter Centre" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.madesmarter.uk/resources/news-made-smarter-innovation-webinar-series/ |
| Description | Manufacturing Expo, NEC Birmingham |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | Regional |
| Primary Audience | Industry/Business |
| Results and Impact | Demonstrator of Scenarios tool - describing current scenario in materials manufacturing |
| Year(s) Of Engagement Activity | 2022 |
| Description | Materials & Manufacturing Research Institute Community Event |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Professional Practitioners |
| Results and Impact | K. Lakshmanan participation in "Materials & Manufacturing Research Institute Community" workshop |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.swansea.ac.uk/science-and-engineering/research/materials-manufacturing/ |
| Description | Northumbria University |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | Regional |
| Primary Audience | Professional Practitioners |
| Results and Impact | C. Giannetti presentation "Talk on Machine Learning and Phase Transitions" |
| Year(s) Of Engagement Activity | 2022 |
| Description | PD Lee 2023 Organised Workshop at ESRF User Meeting |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | PD Lee organised a meeting on large scale sCT imaging at BM18 at the 2023 ESRF User Meeting with over 60 in person attendees and more on line. Presentations included imaging AM, composite, battery and bio-applications. |
| Year(s) Of Engagement Activity | 2023 |
| Description | PD Lee attended ESA/ESTEEC Meeting |
| Form Of Engagement Activity | A formal working group, expert panel or dialogue |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | PDL attended ESA/ESTEEC Meeting - Physical Sciences Working Group, The Netherlands |
| Year(s) Of Engagement Activity | 2023 |
| Description | PD Lee talk at ForMGE |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | PD Lee talk at ForMGE 2022 "Integrated Computational Materials Engineering", |
| Year(s) Of Engagement Activity | 2022 |
| Description | PD Lee talk for European XFEL |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | PD Lee invited talk for European XFEL "Scientific Opportunities with very Hard XFEL Radiation", Hamburg |
| Year(s) Of Engagement Activity | 2023 |
| Description | PD Lee, CLA Leung, AM hub Meeting |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | PD Lee and CLA Leung attended an meeting to form a hub for dynamic and large scale synchrotron imaging of additive manufacturing at ESRF. The proposal will be submitted in Jan 2024 and the Hub would start in Autumn 2024 if successful, bringing together groups from across Europe. |
| Year(s) Of Engagement Activity | 2023 |
| Description | PD Lee, Invited talk at WMG |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | PD Lee, Invited talk at WMG, In situ and operando synchrotron experiments for additive manufacturing model validation |
| Year(s) Of Engagement Activity | 2022 |
| Description | Penn State, Post Graduate course |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Postgraduate students |
| Results and Impact | I. Todd presentation to Penn State, Post Graduate course in Additive Manufacturing "Don't blame the metals, blame the way they're made" |
| Year(s) Of Engagement Activity | 2022 |
| Description | Plenary Talk at TU Delft |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Professional Practitioners |
| Results and Impact | P. Lee invited Plenary Talk at TU Delft, "Validating additive manufacturing models using In situ and operando synchrotron experiments" |
| Year(s) Of Engagement Activity | 2022 |
| Description | Presentation at "Alloys for Additive Manufacturing Symposium 2022 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | S. Hocine Presentation "Operando monitoring of laser powder bed fusion process using synchrotron X-rays and other correlative techniques" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.unibw.de/aams22-en |
| Description | Presentation at 32nd International Conference in Flexible Automation and Intelligent Manufacturing |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Professional Practitioners |
| Results and Impact | Presentation at 32nd International Conference in Flexible Automation and Intelligent Manufacturing |
| Year(s) Of Engagement Activity | 2023 |
| Description | Presentation at Alloys for Additive Manufacturing Symposium 2022 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | S. Bhagavath invited presentation "Image processing application -a hands-on session using Fiji ImageJ" at Alloys for Additive Manufacturing Symposium 2022 |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.unibw.de/aams22-en/program |
| Description | Presentation at Alloys for Additive Manufacturing Symposium 2022 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | D. Rees presentation "Capturing the effect of powder oxidation on hot cracking in LAM of CM247LC using in situ synchrotron X-ray imaging" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.unibw.de/aams22-en/program |
| Description | Presentation at New Frontiers in Materials Design for Laser Additive Manufacturing Conference |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Professional Practitioners |
| Results and Impact | A. Leung presentation on "Seeing melt pool dynamics during powder bed fusion with X-ray" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.dfg.de/foerderung/info_wissenschaft/2020/info_wissenschaft_20_91/index.html |
| Description | Presentation at the UK Solidification Meeting, Brunel University |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | P. Lee presented "New insights into additive manufacturing using synchrotron imaging" at the UK Solidification conference Meeting hosted by Brunel University |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.lime.ac.uk/events/the-uk-solidification-workshop-2022 |
| Description | Presentation of proposed toolkit for responsible co-design to Sustain's network (Swansea) |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | Presentation of proposed toolkit for responsible co-design - purpose to recruit potential interest from organisations to collaborate in the research. |
| Year(s) Of Engagement Activity | 2022 |
| Description | RCaH Research Showcase - keyhole imaging of LPBF |
| Form Of Engagement Activity | A magazine, newsletter or online publication |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | Research Showcase article - "New insights into laser 3D metal printing provide critical guidance in reducing porosity", Research Complex at Harwell |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.rc-harwell.ac.uk/success/showcase/new-insights-into-laser-3d-metal-printing-provide-crit... |
| Description | Research Showcase Article - Case Study: New study promises reduced wastage and energy consumption in automotive |
| Form Of Engagement Activity | A magazine, newsletter or online publication |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | Article to showcase the recent research developments aimed to promote research activities on "New study promises reduced wastage and energy consumption in automotive" |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwi47d3om7j9A... |
| Description | S.Lu presentation at ICCM |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | Presentation entitled "Application of Joule Heating in Automated Dry Fibre Placement" at International Conference on Composite Materials conference |
| Year(s) Of Engagement Activity | 2023 |
| Description | SJ (Brunel) - Session Chair and Presentation at TMS 2023 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Other audiences |
| Results and Impact | Presentation Magnesium Technology Session, Chair Advanced Joining Technologies for Automotive Lightweight Structures at TMS 2023 |
| Year(s) Of Engagement Activity | 2023 |
| Description | Scenario workshop |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | Regional |
| Primary Audience | Industry/Business |
| Results and Impact | Development of current scenario (how materials manufacturing works currently) and future scenario (for performance on demand). |
| Year(s) Of Engagement Activity | 2022 |
| Description | TMS 2024, Orlando, Florida - Presentation by Lucia Scotti |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Professional Practitioners |
| Results and Impact | Lucia Scotti talk: A Digital Thread for field assisted sintering of titanium components |
| Year(s) Of Engagement Activity | 2024 |
| URL | https://www.tms.org/TMS2024/Home/TMS2024/Default.aspx?hkey=54504ea7-8339-4a6d-855c-30ecc0bfe027 |
| Description | Talk Y Chen, AAMS22 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | Talk Y Chen, AAMS22, "New Insights into Laser Additive Manufacturing from Multimodal Synchrotron X-ray"m accpted |
| Year(s) Of Engagement Activity | 2022 |
| Description | Towards Digital Materials Passports in Materials Intensive Industries and Wider Supply Chain - Mapping Future Scenarios |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Industry/Business |
| Results and Impact | Workshop hosted by MMSC "Towards Digital Materials Passports in Materials Intensive Industries and Wider Supply Chain - Mapping Future Scenarios" |
| Year(s) Of Engagement Activity | 2023 |
| Description | V Yakubov poster at APICAM23 |
| Form Of Engagement Activity | A talk or presentation |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | V Yakubov poster at APICAM23 "Understanding residual stress and texture in additive friction stir deposited aluminium alloy" Australia |
| Year(s) Of Engagement Activity | 2023 |
| Description | Visit by Joseph Oluleke (Carpenter Additive) to ESRF |
| Form Of Engagement Activity | Participation in an activity, workshop or similar |
| Part Of Official Scheme? | No |
| Geographic Reach | International |
| Primary Audience | Industry/Business |
| Results and Impact | Visit by Joseph Oluleke (Carpenter Additive) to ESRF, "Study Effects of Powder Oxidation on Melt Pool Dynamics using Ultr-fast X-ray Imaging", Grenoble (France) |
| Year(s) Of Engagement Activity | 2023 |
| Description | Welsh Data Nation Accelerator |
| Form Of Engagement Activity | A formal working group, expert panel or dialogue |
| Part Of Official Scheme? | No |
| Geographic Reach | National |
| Primary Audience | Policymakers/politicians |
| Results and Impact | Workshop gaining insight, foresight and intelligence from diverse data assets for societal, health and economic impact. |
| Year(s) Of Engagement Activity | 2022 |
| URL | https://www.cardiff.ac.uk/innovation/our-partnerships/data-nation-accelerator |