Low TRL Tools for Assessing Emissions and Operability

In recent years much work has concentrated on reducing the emissions produced by gas turbine combustion systems which has involved experimental activities over a range of Technology Readiness Levels (TRL's). However, the ability to assess other operability characteristics at a low TRL is somewhat limited, and often reduced emissions are achieved by compromising these other characteristics. For example, recent low emission combustion systems have eroded margins in (i) altitude relight and the probability of the flame surviving engine pull-away and (ii) the probability of achieving a successful ground start. Similarly, low smoke/emissions fuel injectors often have poor weak extinction characteristics. The focus of this project is to develop understanding and a low TRL tool set that can capture one or more of these operability characteristics at an early stage in an engine development programme. This could include, for example, understanding the reasons behind the observed variability on start-up performance and the development of a suitable network model (i.e., design tool) to capture this phenomenon which could also require an assessment of fuel injector atomisation at low flows. Alternatively, the development of an experimental capability to capture both high altitude relight and engine pull-away may also be considered. The changes observed in many of the operability characteristics are most likely associated with poor combustion efficiency. Hence it may be desirable to create (i) a capability by which combustion efficiency can be measured and/or (ii) generate understanding as an enabler to extend/improve low power efficiency.

1. Impact on the UK Aero-Propulsion and Power Generation Industry
The UK Propulsion and Power sector is undergoing disruptive change. Electrification is allowing a new generation of Urban Air Vehicles to be developed, with over 70 active programmes planning a first flight by 2024. In the middle of the aircraft market, companies like Airbus and Rolls-Royce, are developing boundary layer ingestion propulsion systems. At high speed, Reaction Engines Ltd are developing complex new air breathing engines. In the aero gas turbine sector Rolls-Royce is developing UltraFan, its first new architecture since the 1970s. In the turbocharger markets UK companies such as Cummins and Napier are developing advanced turbochargers for use in compounded engines with electrical drive trains. In the power generation sector, Mitsubishi Heavy Industries and Siemens are developing new gas turbines which have the capability for rapid start up to enable increased supply from renewables. In the domestic turbomachinery market, Dyson are developing a whole new range of miniature high speed compressors. All of these challenges require a new generation of engineers to be trained. These engineers will need a combination of the traditional Aero-thermal skills, and new Data Science and Systems Integration skills. The Centre has been specifically designed to meet this challenge.

Over the next 20 years, Rolls-Royce estimates that the global market opportunities in the gas turbine-related aftercare services will be worth over US$700 billion. Gas turbines will have 'Digital Twins' which are continually updated using engine health data. To ensure that the UK leads this field it is important that a new generation of engineer is trained in both the underpinning Aero-thermal knowledge and in new Data Science techniques. The Centre will provide this training by linking the University and Industry Partners with the Alan Turing Institute, and with industrial data labs such as R2 Data Labs at Rolls-Royce and the 'MindSphere' centres at Siemens.

2. Impact on UK Propulsion and Power Research Landscape
The three partner institutions (Cambridge, Oxford and Loughborough) are closely linked to the broader UK Propulsion and Power community. This is through collaborations with universities such as Imperial, Cranfield, Southampton, Bath, Surrey and Sussex. This will allow the research knowledge developed in the Centre to benefit the whole of the UK Propulsion and Power research community.

The Centre will also have impact on the Data Science research community through links with the CDT in Data Centric Engineering (DCE) at Imperial College and with the Alan Turning Institute. This will allow cross-fertilization of ideas related to data science and the use of advanced data analytics in the Propulsion and Power sectors.

3. Impact of training a new generation of engineering students
The cohort-based training programme of the current CDT in Gas Turbine Aerodynamics has proved highly successful. The Centre's independent Advisory Group has noted that the multi-institution, multi-disciplinary nature of the Centre is unique within the global gas turbine training community, and the feedback from cohorts of current students has been extremely positive (92% satisfaction rating in the 2015 PRES survey). The new CDT in Future Propulsion and Power will combine the core underlying Aero-thermal knowledge of the previous CDT with the Data Science and Systems Integration skills required to meet the challenges of the next generation. This will provide the UK with a unique cohort of at least 90 students trained both to understand the real aero-thermal problems and to have the Data Science and Systems Integration skills necessary to solve the challenges of the future.