MAPP: EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder Processes
Lead Research Organisation:
University of Sheffield
Department Name: Materials Science and Engineering
Abstract
Manufacture Using Advanced Powder Processes - MAPP
Conventional materials shaping and processing are hugely wasteful and energy intensive. Even with well-structured materials circulation strategies in place to recondition and recycle process scrap, the energy use, CO2 emitted and financial costs associated are ever more prohibitive and unacceptable. We can no longer accept the traditional paradigm of manufacturing where excess energy use and high levels of recycling / down cycling of expensive and resource intensive materials are viewed as inevitable and the norm and must move to a situation where 100% of the starting material is incorporated into engineering products with high confidence in the final critical properties.
MAPP's vision is to deliver on the promise of powder-based manufacturing processes to provide low energy, low cost, and low waste high value manufacturing route and products to secure UK manufacturing productivity and growth. MAPP will deliver on the promise of advanced powder processing technologies through creation of new, connected, intelligent, cyber-physical manufacturing environments to achieve 'right first time' product manufacture. Achieving our vision and realising the potential of these technologies will enable us to meet our societal goals of reducing energy consumption, materials use, and CO2 emissions, and our economic goals of increasing productivity, rebalancing the UK's economy, and driving economic growth and wealth creation.
We have developed a clear strategy with a collaborative and interdisciplinary research and innovation programme that focuses our collective efforts to deliver new understanding, actions and outcomes across the following themes:
1) Particulate science and innovation. Powders will become active and designed rather than passive elements in their processing. Control of surface state, surface chemistry, structure, bulk chemistry, morphologies and size will result in particles designed for process efficiency / reliability and product performance. Surface control will enable us to protect particles out of process and activate them within. Understanding the influence between particle attributes and processing will widen the limited palette of materials for both current and future manufacturing platforms.
2) Integrated process monitoring, modelling and control technologies. New approaches to powder processing will allow us to handle the inherent variability of particulates and their stochastic behaviours. Insights from advanced in-situ characterisation will enable the development of new monitoring technologies that assure quality, and coupled to modelling approaches allow optimisation and control. Data streaming and processing for adaptive and predictive real-time control will be integral in future manufacturing platforms increasing productivity and confidence.
3) Sustainable and future manufacturing technologies. Our approach will deliver certainty and integrity with final products at net or near net shape with reduced scrap, lower energy use, and lower CO2 emissions. Recoupling the materials science with the manufacturing science will allow us to realise the potential of current technologies and develop new home-grown manufacturing processes, to secure the prosperity of UK industry.
MAPP's focused and collaborative research agenda covers emerging powder based manufacturing technologies: spark plasma sintering (SPS), freeze casting, inkjet printing, layer-by-layer manufacture, hot isostatic pressing (HIP), and laser, electron beam, and indirect additive manufacturing (AM). MAPP covers a wide range of engineering materials where powder processing has the clear potential to drive disruptive growth - including advanced ceramics, polymers, metals, with our initial applications in aerospace and energy sectors - but where common problems must be addressed.
Conventional materials shaping and processing are hugely wasteful and energy intensive. Even with well-structured materials circulation strategies in place to recondition and recycle process scrap, the energy use, CO2 emitted and financial costs associated are ever more prohibitive and unacceptable. We can no longer accept the traditional paradigm of manufacturing where excess energy use and high levels of recycling / down cycling of expensive and resource intensive materials are viewed as inevitable and the norm and must move to a situation where 100% of the starting material is incorporated into engineering products with high confidence in the final critical properties.
MAPP's vision is to deliver on the promise of powder-based manufacturing processes to provide low energy, low cost, and low waste high value manufacturing route and products to secure UK manufacturing productivity and growth. MAPP will deliver on the promise of advanced powder processing technologies through creation of new, connected, intelligent, cyber-physical manufacturing environments to achieve 'right first time' product manufacture. Achieving our vision and realising the potential of these technologies will enable us to meet our societal goals of reducing energy consumption, materials use, and CO2 emissions, and our economic goals of increasing productivity, rebalancing the UK's economy, and driving economic growth and wealth creation.
We have developed a clear strategy with a collaborative and interdisciplinary research and innovation programme that focuses our collective efforts to deliver new understanding, actions and outcomes across the following themes:
1) Particulate science and innovation. Powders will become active and designed rather than passive elements in their processing. Control of surface state, surface chemistry, structure, bulk chemistry, morphologies and size will result in particles designed for process efficiency / reliability and product performance. Surface control will enable us to protect particles out of process and activate them within. Understanding the influence between particle attributes and processing will widen the limited palette of materials for both current and future manufacturing platforms.
2) Integrated process monitoring, modelling and control technologies. New approaches to powder processing will allow us to handle the inherent variability of particulates and their stochastic behaviours. Insights from advanced in-situ characterisation will enable the development of new monitoring technologies that assure quality, and coupled to modelling approaches allow optimisation and control. Data streaming and processing for adaptive and predictive real-time control will be integral in future manufacturing platforms increasing productivity and confidence.
3) Sustainable and future manufacturing technologies. Our approach will deliver certainty and integrity with final products at net or near net shape with reduced scrap, lower energy use, and lower CO2 emissions. Recoupling the materials science with the manufacturing science will allow us to realise the potential of current technologies and develop new home-grown manufacturing processes, to secure the prosperity of UK industry.
MAPP's focused and collaborative research agenda covers emerging powder based manufacturing technologies: spark plasma sintering (SPS), freeze casting, inkjet printing, layer-by-layer manufacture, hot isostatic pressing (HIP), and laser, electron beam, and indirect additive manufacturing (AM). MAPP covers a wide range of engineering materials where powder processing has the clear potential to drive disruptive growth - including advanced ceramics, polymers, metals, with our initial applications in aerospace and energy sectors - but where common problems must be addressed.
Planned Impact
The Impact of MAPP : The impact of research within MAPP will be on many fronts; technological, economic, on society and well-being and, through the people we train and the next generation we inspire, on the scientific and engineering workforce of the UK. We aim to deliver EPSRC impact across the full range of current themes: Resilient Nation, Productive Nation, Healthy Nation and Connected Nation through our work in developing the supply chain, a cyber-physical advanced powder manufacturing environment and in reducing waste and manufacturing costs. Specific impacts are projected to be:
Technological: MAPP will be instrumental in maintaining a leading and differentiated technology base within the UK, which is imperative to securing the future success of key industry sectors. Our vision - to deliver on the promise of advanced powder processes - will yield a number of impacts:
1. Achieving 'right first time' manufacturing in powder processes with new levels of process control reducing material waste, energy use and component rejection whilst assuring quality for the high value manufacturing sectors.
2. Develop smart production systems and through engineering manufacturing solutions for the factories of the future.
3. Develop new, homegrown manufacturing technologies for UK industry in an important and rapidly moving area, and one where homegrown developments have been sorely lacking.
Economic: MAPP will impact on broadly on the materials and manufacturing sector (15% of UK GDP) with applications from transport to energy. MAPP aims to help sustain the existing sector, by protecting their current market at the same time as generating growth in the existing market position, and to achieve growth in new markets through the development and application of novel manufacturing processes. In particular we envisage the following economic impacts:
1. Enable UK technology leadership in key global industries, by maintaining and growing a strong knowledge base in manufacturing to support our high value manufacturing sectors.
2. Reduce manufacturing costs via reduced energy use in process, reduced materials inputs, and new design freedoms that reduce component numbers and assembly operations.
3. Supporting the development of a complete and robust supply chain for UK industry in powder-based manufacturing.
Societal, Policy and People Impacts: MAPP will deliver a number of benefits in these areas:
1. Reduction in energy use (and CO2) in manufacturing of products and during lifetime
2. Have a positive impact on jobs and investment in the UK
3. Improve the health (reduced pollution) and wealth of the nation (jobs, economic growth).
4. Shape and contribute the national debate and development of strategies for UK manufacturing research and development with the community, funders and policy makers.
5. Train and nurture a new generation of manufacturing and engineering leaders.
Outreach: We seek to create an inclusive academic, research and industrial user community within MAPP, one that provides easy, supported and collaborative access to the facilities and research we will develop. Our community outreach activities are therefore designed to draw people into MAPP and establish a network of linked and complementary collaborative projects.
Public engagement: Our activities here are intended to contribute to the important narrative to increase the profile and prestige of manufacturing and engineering within the UK, which is critical to help address the nation's skills gap. We will develop our existing outreach activities with schools, including visits and talks, and producing videos such the Tomorrow's Engineers targeted at developing passion for engineering and physical sciences in teachers and school children.
Technological: MAPP will be instrumental in maintaining a leading and differentiated technology base within the UK, which is imperative to securing the future success of key industry sectors. Our vision - to deliver on the promise of advanced powder processes - will yield a number of impacts:
1. Achieving 'right first time' manufacturing in powder processes with new levels of process control reducing material waste, energy use and component rejection whilst assuring quality for the high value manufacturing sectors.
2. Develop smart production systems and through engineering manufacturing solutions for the factories of the future.
3. Develop new, homegrown manufacturing technologies for UK industry in an important and rapidly moving area, and one where homegrown developments have been sorely lacking.
Economic: MAPP will impact on broadly on the materials and manufacturing sector (15% of UK GDP) with applications from transport to energy. MAPP aims to help sustain the existing sector, by protecting their current market at the same time as generating growth in the existing market position, and to achieve growth in new markets through the development and application of novel manufacturing processes. In particular we envisage the following economic impacts:
1. Enable UK technology leadership in key global industries, by maintaining and growing a strong knowledge base in manufacturing to support our high value manufacturing sectors.
2. Reduce manufacturing costs via reduced energy use in process, reduced materials inputs, and new design freedoms that reduce component numbers and assembly operations.
3. Supporting the development of a complete and robust supply chain for UK industry in powder-based manufacturing.
Societal, Policy and People Impacts: MAPP will deliver a number of benefits in these areas:
1. Reduction in energy use (and CO2) in manufacturing of products and during lifetime
2. Have a positive impact on jobs and investment in the UK
3. Improve the health (reduced pollution) and wealth of the nation (jobs, economic growth).
4. Shape and contribute the national debate and development of strategies for UK manufacturing research and development with the community, funders and policy makers.
5. Train and nurture a new generation of manufacturing and engineering leaders.
Outreach: We seek to create an inclusive academic, research and industrial user community within MAPP, one that provides easy, supported and collaborative access to the facilities and research we will develop. Our community outreach activities are therefore designed to draw people into MAPP and establish a network of linked and complementary collaborative projects.
Public engagement: Our activities here are intended to contribute to the important narrative to increase the profile and prestige of manufacturing and engineering within the UK, which is critical to help address the nation's skills gap. We will develop our existing outreach activities with schools, including visits and talks, and producing videos such the Tomorrow's Engineers targeted at developing passion for engineering and physical sciences in teachers and school children.
Organisations
- University of Sheffield (Lead Research Organisation, Project Partner)
- Olympus (Collaboration)
- University of Surrey (Collaboration)
- University of Shimane (Collaboration)
- Culham Centre for Fusion Energy (Collaboration)
- Solar Turbines (Collaboration)
- Aeromet International (Collaboration)
- Alloyed (Collaboration)
- McMaster University (Collaboration)
- National Institute of Applied Sciences of Lyon (Collaboration)
- Carpenter Technology Corporation (Collaboration)
- Queen's University (Collaboration)
- UNIVERSITY OF BIRMINGHAM (Collaboration)
- Tata Steel (United Kingdom) (Collaboration)
- European Space Agency (Collaboration)
- Saudi Basic Industries Corporation (Collaboration)
- Phoenix Materials Testing Ltd (Collaboration)
- European Space Research Institute (Collaboration)
- North East Automotive Alliance (Collaboration)
- Freeman Technology (Collaboration)
- Population Services International (Collaboration)
- Phoenix Scientific Industries (UK) Ltd (Collaboration)
- RMIT University (Collaboration)
- Airbus Group (Collaboration)
- RELIANCE PRECISION LIMITED (Collaboration)
- MRC Harwell Institute (Collaboration)
- Horiba (Collaboration)
- UNIVERSITY OF OXFORD (Collaboration)
- PSI (Collaboration)
- Alan Turing Institute (Collaboration)
- BRUNEL UNIVERSITY LONDON (Collaboration)
- Science and Technologies Facilities Council (STFC) (Collaboration)
- ArcelorMittal (Collaboration)
- HRL Laboratories, LLC (Collaboration)
- High Value Manufacturing Catapult (Collaboration)
- Boeing (Collaboration)
- The Manufacturing Technogy Centre (Collaboration)
- Oxford Instruments (United Kingdom) (Collaboration)
- US Navy (Collaboration)
- Fraunhofer Society (Collaboration)
- Tripal Group (Collaboration)
- McLaren Group (Collaboration)
- The Welding Institute (Collaboration)
- Shanghai Jiao Tong University (Collaboration)
- Seco Group (Collaboration)
- Materialise (Collaboration)
- Seco Tools (Collaboration, Project Partner)
- Argonne National Laboratory (Collaboration)
- Doncasters Group Ltd (Collaboration)
- HiETA Technologies Limited (Collaboration)
- Sheffield City Region Local Economic Partnership (Collaboration)
- UNIVERSITY OF EDINBURGH (Collaboration)
- Braskema America Inc (Collaboration)
- Carl Zeiss AG (Collaboration)
- Inovar Communications Ltd (Collaboration)
- Britishvolt (Collaboration)
- Netzsch Instruments (Collaboration)
- INNOVATE UK (Collaboration)
- Jiangsu Delin Environment Protection Technology Co Ltd (Collaboration)
- Alfa Laval AB (Collaboration)
- University of Bristol (Collaboration)
- Autodesk (Collaboration)
- Quintus Technologies (Collaboration)
- Insphere Ltd (Collaboration)
- ESI Group (Collaboration)
- UNIVERSITY OF LEICESTER (Collaboration)
- STFC Laboratories (Collaboration)
- XAAR PLC (Collaboration)
- LSN Diffusion Ltd (Collaboration)
- Reaction Engines (Collaboration)
- IMPERIAL COLLEGE LONDON (Collaboration)
- OXFORD BROOKES UNIVERSITY (Collaboration)
- NUCLEAR ADVANCED MANUFACTURING RESEARCH CENTRE (Collaboration)
- Henry Royce Institute (Collaboration)
- Meenakshi Academy of Higher Education and Research (Collaboration)
- Photocentric (Collaboration)
- Rutherford Appleton Laboratory (Collaboration)
- Force Technology A/S (Collaboration)
- Liberty Steel (Collaboration)
- GKN (Collaboration)
- University of Mondragón (Collaboration)
- Dr Fritsch (Collaboration)
- Thermocalc (Collaboration)
- Centre Modelling and Simulation (CFMS) (Collaboration)
- United Kingdom Atomic Energy Authority (Collaboration)
- BAE Systems (United Kingdom) (Collaboration)
- Centre for Process Innovation (CPI) (Collaboration)
- COVENTRY UNIVERSITY (Collaboration)
- Jaguar Land Rover Automotive PLC (Collaboration)
- Granutools (Collaboration)
- Lucideon (Collaboration)
- Weir Group PLC (Collaboration, Project Partner)
- TWI The Welding Institue (Collaboration)
- University of Warwick (Collaboration)
- Rolls Royce Group Plc (Collaboration)
- UNIVERSITY OF STRATHCLYDE (Collaboration)
- DIAMOND LIGHT SOURCE (Collaboration)
- UNIVERSITY OF GREENWICH (Collaboration)
- Helmholtz Association of German Research Centres (Collaboration)
- Transition International Ltd (Collaboration)
- Ford Motor Company (United Kingdom) (Collaboration)
- Sandvik Osprey Ltd (Collaboration)
- University of Sheffield (Collaboration)
- Retsch GmbH (Collaboration)
- National Composites Centre (NCC) (Collaboration)
- Oregon State University (Collaboration)
- Motion Systems (Collaboration)
- Composite Metal Technologies (Collaboration)
- Morgan Advanced Materials (Collaboration)
- Johnson Matthey (United Kingdom) (Collaboration, Project Partner)
- Institut Laue–Langevin (Collaboration)
- TU Wien (Collaboration)
- Oerlikon Group (Collaboration)
- Metalysis Ltd (Collaboration)
- Wayland Additive (Collaboration)
- Addmaster (UK) Ltd, Staffordshire Technology Park (Collaboration)
- Atomising Systems (Collaboration)
- European Synchrotron Radiation Facility (Collaboration)
- Defence Science & Technology Laboratory (DSTL) (Collaboration)
- University of Melbourne (Collaboration)
- IPG Photonics (UK) Limited (Collaboration)
- MANCHESTER METROPOLITAN UNIVERSITY (Collaboration)
- De Beers Group (Collaboration)
- National University of Singapore (Collaboration)
- Bentley Motors (Collaboration)
- University of Toronto (Collaboration)
- SWANSEA UNIVERSITY (Collaboration)
- Ferroday (Collaboration)
- Monash University (Collaboration)
- ACCESS (Collaboration)
- Carbolite Gero (Collaboration)
- German Aerospace Centre (DLR) (Collaboration)
- National Physical Laboratory (Collaboration)
- Manufacturing Technology Centre (MTC) (Collaboration)
- Gestamp Automoción (Collaboration)
- Malvern Panalytical (Collaboration)
- European Organization for Nuclear Research (CERN) (Collaboration)
- Photron Europe (Collaboration)
- Australian Nuclear Science and Technology Organisation (Collaboration)
- University of Kassel (Collaboration)
- Oxford Lasers Ltd (Collaboration)
- TISICS (Collaboration)
- Verder Group (Collaboration)
- Coherent (Collaboration)
- University of Queensland (Collaboration)
- Indian Institute of Technology Bombay (Collaboration)
- University of Manchester (Collaboration)
- University College London (Collaboration)
- UNIVERSITY OF NOTTINGHAM (Collaboration)
- Archer Tehnicoat Ltd (Collaboration)
- Victoria Drop Forgings Co Ltd (Collaboration)
- Renishaw (United Kingdom) (Collaboration, Project Partner)
- Shell Global Solutions International BV (Collaboration)
- Additive Industries B.V. (Collaboration)
- Advanced Manufacturing Research Centre (Collaboration)
- MATERIALS PROCESSING INSTITUTE (Collaboration)
- LPW Technology Ltd (Collaboration)
- Siemens AG (Collaboration)
- Diamond Centre Wales (Collaboration)
- Constellium (Collaboration)
- Morgan Advanced Materials (United Kingdom) (Project Partner)
- Centre for Process Innovation (Project Partner)
- Metalysis Ltd (Project Partner)
- Element Six (United Kingdom) (Project Partner)
- LPW Technology (United Kingdom) (Project Partner)
- Freemantechnology (Project Partner)
- Safran (United Kingdom) (Project Partner)
- National Composites Centre (Project Partner)
- University of Strathclyde (Project Partner)
- GKN (United Kingdom) (Project Partner)
- Eastman Chemical Company (United States) (Project Partner)
- University of Warwick (Project Partner)
- MAHER Limited (Project Partner)
- Phoenix Scientific Industries (United Kingdom) (Project Partner)
- Carl Zeiss (Germany) (Project Partner)
- Nuclear AMRC (Project Partner)
- Rolls-Royce (United Kingdom) (Project Partner)
- Xaar (United Kingdom) (Project Partner)
- Manufacturing Technology Centre (United Kingdom) (Project Partner)
Publications
Wang S
(2020)
Slip-hydride interactions in Zircaloy-4: Multiscale mechanical testing and characterisation
in Acta Materialia
Wang S
(2022)
The effect of hydrogen on the multiscale mechanical behaviour of a La(Fe,Mn,Si)13-based magnetocaloric material
in Journal of Alloys and Compounds
Wang S
(2024)
Shear and delamination behaviour of basal planes in Zr3AlC2 MAX phase studied by micromechanical testing
in Scripta Materialia
Wang S
(2023)
Determining the fundamental failure modes in Ni-rich lithium ion battery cathodes
in Journal of the European Ceramic Society
Wang S
(2023)
Near-atomic scale chemical analysis of interfaces in a La(Fe,Mn,Si)13-based magnetocaloric material
in Scripta Materialia
Wang H
(2019)
High-energy, high-resolution, fly-scan X-ray phase tomography.
in Scientific reports
Wang A
(2023)
Blue laser directed energy deposition of aluminum with synchronously enhanced efficiency and quality
in Additive Manufacturing Letters
W.Mycroft
(2020)
A data-driven approach for predicting printability in additive manufacturing processes
in Journal of Intelligent Manufacturing
Velasco-Castro M
(2019)
The effect of oxygen pickup during selective laser melting on the microstructure and mechanical properties of Ti-6Al-4V lattices.
in Heliyon
V Rocha
(2020)
Direct ink writing advances in multi-material structures for a sustainable future
in Royal Society of Chemistry
Unnikrishnan R
(2022)
Functionalization of Metallic Powder for Performance Enhancement
in SSRN Electronic Journal
Unnikrishnan R
(2022)
Functionalization of metallic powder for performance enhancement
in Materials & Design
Turner R
(2020)
Use of silver-based additives for the development of antibacterial functionality in Laser Sintered polyamide 12 parts
in Scientific Reports
Todd I
(2017)
Metallurgy: No more tears for metal 3D printing.
in Nature
Todd I
(2017)
Metallurgy: Printing steels.
in Nature materials
Tarver J
(2024)
An investigation into the mechanisms that influence laser sintered polyamide-12 top surfaces
in Rapid Prototyping Journal
Tammas-Williams S
(2017)
The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components.
in Scientific reports
Tammas-Williams S
(2017)
Design for additive manufacturing with site-specific properties in metals and alloys
in Scripta Materialia
Tammas-Williams S
(2017)
Design for additive manufacturing with site-specific properties in metals and alloys
in Scripta Materialia
Title | Comparison of Monitoring Methods during L-DED of Inconel 718 |
Description | Videos showing 4 different monitoring techniques during L-DED (BeAM Magic 2.0) of Inconel 718 |
Type Of Art | Film/Video/Animation |
Year Produced | 2022 |
URL | https://zenodo.org/record/6760220 |
Title | L-DED Printing of 316L Steel Cylinders |
Description | Two videos showing building of 316L Steel Cylinders using L-DED process (BeAM Magic 2.0) |
Type Of Art | Film/Video/Animation |
Year Produced | 2022 |
URL | https://zenodo.org/record/6760036 |
Description | 2023-2024 Update Update MAPP has focused on removing and reducing barriers to adoption of emerging powder based manufacturing technologies so that their full potential for reducing the negative impacts of manufacture and enabling new, enhanced functionality in components, can be reached. Our interdisciplinary team of researchers from across the Hub, have developed new tools, insights and applications for advanced powder processing technologies - they have worked closely with Industry and our University and Innovation partners to translate our work from the lab to application. To enable this smooth transition MAPP ran aligned research projects which range from Feasibility Studies and KTPs to collaborative R&D programmes supported by ATI and Innovate UK. In addition MAPP has supported training of the next generation of engineers in the sector, through industrially supported PhD's. On 28th and 29th June 2023 MAPP held its Second International Conference at which presentations were made from all research teams across MAPP as well as a series of invited talks from both industry and academia. The conference, attended by over 120 delegates, was a great opportunity to celebrate the collaborative research efforts across all the partners in MAPP. Over its duration, MAPP has delivered on its vision, creating a critical mass of intellectual effort and leading infrastructure and acting as an international focal point for research, development, innovation and training on advanced powder processes. It has drawn together industrial, academic, and innovation communities to deliver the maximum academic, technological, societal, and economic impact for the UK in the advanced powder processing field. MAPP has attracted a total of more than £30 million aligned and leveraged income from across Industry and Academia and published around 200 international journal papers. Highlights include: - In situ research on Laser Powder Bed Fusion that paves the way for using synchrotron-calibrated digital twins for process prediction and suggests new ways to improve process reliability. - The creation of a second generation Blown-powder Additive Manufacturing Process Replicator, BAMPR-II, as a physical twin to provide deeper insights and process optimisation of key new alloys being used for repair applications in aerospace. - Demonstration of calibrated closed-loop control in reducing the effects that geometry can have on mechanical behaviour in Directed Energy Deposition (DED). - Research and publications on understanding the role of additive manufacturing in the development of astronomical hardware. - The feasibility of using Field Assisted Sintering Technology (FAST) to consolidate powder of a Nb-silicide based alloy for high temperature aerospace applications. - Techniques developed using calibrated closed-loop monitoring and control of the Directed Energy Deposition process to achieve geometry-agnostic builds with more repeatable mechanical properties. - Recommendation that a Spreadability Index is measured as a new property for Metal Powders used in Additive Manufacturing applications. - Useful insights into the Hot Isostatic Pressing (HIPing) process of a novel Ti-Fe binary alloy via in-situ mimic HIPing experiments under synchrotron X-ray. For the first time, the whole densification process has been recorded by X-ray imaging. - The extension of robocasting to the fabrication of ceramic composites and glasses. - Work that opens new opportunities for the extension of digital light processing to non-oxide ceramics. - Characterising a library of powders at the individual and bulk level. - Methods to coat stainless steel powders to prevent oxidation. - Using Field Assisted Sintering Technology (FAST) to optimise and improve process control. - Developing deep-learning algorithms to enable rapid process parameter development, monitoring components as they are manufactured to enable 'right first time' manufacturing. - The most in-depth understanding to date of porosity and pore formation as a result of varying levels of energy input in High Speed Sintering (HSS). - New understanding in process models through the development of a laser powder bed Additive Manufacturing (AM) replicator, a Directed Energy Deposition (DED) replicator and an in-situ synchrotron rig for investigating the FAST process. - Use of machine learning to develop data driven approaches to predict printability in AM. |
Exploitation Route | We have a portfolio of aligned projects with commercial and catapult partners to developments to higher Technology Readiness Level (TRL), funded by industry, Innovate UK and Aerospace Technologies Institute (see Narrative Impact). Much of MAPPs research is covered in international journal publications and has been presented at major international conferences across the range of themes in the partnership. More of the outcomes in MAPP are being written into further publications and patents. A number of spin-out companies are also in development through the research undertaken in MAPP. |
Sectors | Aerospace Defence and Marine Digital/Communication/Information Technologies (including Software) Energy Healthcare Manufacturing including Industrial Biotechology Pharmaceuticals and Medical Biotechnology Transport |
URL | http://www.mapp.ac.uk |
Description | Work performed at the Diamond Light Source and at The University of Sheffield in an aligned MAPP programme has been used in support of many industrial applications including: Blisk and Blade Repair at Rolls Royce - March 2020, Carpenter Additive on the impact of powder quality in the Laser Powder Bed Fusion Process (£60,000 - Sept 2022), Renishaw in their manufacture of a Quad ISOPR system (£480,000 - 2022) and IPG Photonics in the X-ray imaging of Process Dynamics during EV Welding (2023). DAM (Diode Area Melting) developed in MAPP has been used with the Diamond Centre Wales in an now completed Innovate UK Project JewelPrint - January 2021. Advanced metrology for Additive Manufacturing (AM) process monitoring and control has resulted in further work and research grants with SMEs, corporates and other networks including: Innovate UK grants with Reliance Precision (£666,000) (March 2017), Wayland Additive (£267,000 - May 2019) ; large industrial partners, e.g. Aerospace Technology Institute funded project with GKN Aerospace, Autodesk and AMRC (£7,100,000) and HVM Catapult partners (March 2018). Activity related to Diode Area Melting (DAM) built a very strong working relationship with the Manufacturing Technology Centre (MTC) who supported an EPSRC industrial CASE Studentship (£40,000 - October 2018) to assist collaboration and support benchmarking with established technologies for application mainly in the automotive sector. MAPP supported work on Diode Area Melting (DAM )leading to a new partnership with Diamond Centre Wales (DCW) on Additive Manufacture (AM) of precious metals, creating a hybrid AM system incorporating standard Selective Laser Melting (SLM) with the novel diode array that forms the basis for DAM. This supported by an Innovate UK funded project (£129,000) and delivered a working prototype of very efficient, low power, single mode blue laser array for high resolution parts with smooth surface finish ideal for application in jewellery and the manufacture of critical and high precision components - (Completed January 2021). Spinoff activity in graphene reduction from graphene oxide in rolltoroll production initiated with Multilase Ltd and the Graphene Engineering Innovation Centre (GEIC) is aimed at developing an industrially applicable, high speed and low cost solution for at scale manufacture of this increasingly sought after material (Initiated January 2020). |
First Year Of Impact | 2017 |
Sector | Aerospace, Defence and Marine,Energy,Manufacturing, including Industrial Biotechology,Pharmaceuticals and Medical Biotechnology,Transport |
Impact Types | Societal Economic |
Description | Candice Majewski joined TIGERS - an external group dedicated to Equality and Diversity in STEM. |
Geographic Reach | National |
Policy Influence Type | Participation in a guidance/advisory committee |
URL | https://www.tigerinstemm.org/ |
Description | Iain Todd - member of DRAMA (Digital Reconfigurable Additive Manufacturing facilities for Aerospace) steering group arranged by MTC |
Geographic Reach | National |
Policy Influence Type | Participation in a guidance/advisory committee |
URL | http://ncam.the-mtc.org/drama/overview |
Description | PD Lee appointed to "MoD Manufacturing Technology Working Group" |
Geographic Reach | Europe |
Policy Influence Type | Participation in a guidance/advisory committee |
Description | PD Lee appointed to ESA SciSpacE Strategy Advisory Committee |
Geographic Reach | Europe |
Policy Influence Type | Participation in a guidance/advisory committee |
Description | Prof Peter D Lee, Organiser, Town Hall Meeting "Manufacturing the Future utilising the UK's Large Facilities", Jan 2020 |
Geographic Reach | Europe |
Policy Influence Type | Contribution to a national consultation/review |
URL | https://mapp.ac.uk/events/town-hall-meeting-manufacturing-the-future-utilising-the-uks-large-facilit... |
Description | (AMITIE) - Additive Manufacturing Initiative for Transnational Innovation in Europe |
Amount | € 877,500 (EUR) |
Funding ID | 734342 |
Organisation | European Commission |
Sector | Public |
Country | European Union (EU) |
Start | 03/2017 |
End | 02/2021 |
Description | 2022 University College London - University of Toronto Joint Call for Collaborative Projects in the Emerging Global Talents stream - Additive Manufacturing of Lightweight Metallic Materials |
Amount | $20,000 (CAD) |
Organisation | University of Toronto |
Sector | Academic/University |
Country | Canada |
Start | 12/2022 |
End | 12/2023 |
Description | ATI Programme Strategic Batch |
Amount | £799,624 (GBP) |
Organisation | Department for Business, Energy & Industrial Strategy |
Sector | Public |
Country | United Kingdom |
Start | 05/2021 |
End | 05/2025 |
Description | Advanced Metallic CDT (Manchester) "X-ray Computer Tomography and Microstructural Characterisation of Additive Structures for Advanced Repair of Aeroengine Components" |
Amount | £85,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2023 |
End | 09/2027 |
Description | Advanced Metallics CDT Phase 2 (Todd I, Jackson M) |
Amount | £1,620,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2019 |
End | 04/2024 |
Description | Aerospace Technology Institute - Additive Innovation of Recycling, Reuse and Revert (AIR 3D) - (Todd I, Jackson M) |
Amount | £10,880,912 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 01/2019 |
End | 12/2020 |
Description | Aerospace Technology Institute - Airlift with GKN (Todd I, Panoutsos G) |
Amount | £8,720,700 (GBP) |
Organisation | Aerospace Technology Institute |
Sector | Charity/Non Profit |
Country | United Kingdom |
Start | 04/2018 |
End | 02/2022 |
Description | Aerospace Technology Institute - DAM with GKN (Todd I, Panoutsos G, Willmott J) |
Amount | £7,141,800 (GBP) |
Organisation | Aerospace Technology Institute |
Sector | Charity/Non Profit |
Country | United Kingdom |
Start | 03/2018 |
End | 03/2021 |
Description | Aerospace Technology Institute, DRASTIC |
Amount | £1,842,787 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 05/2021 |
End | 06/2024 |
Description | An integrated (ICME) approach to multiscale modelling of the fabrication and joining of powder processed parts |
Amount | £1,003,550 (GBP) |
Funding ID | EP/P005284/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 12/2016 |
End | 11/2021 |
Description | Anti Infectives for Additive Manufacturing |
Amount | £19,168 (GBP) |
Funding ID | 182283 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2023 |
End | 03/2024 |
Description | Anti Infectives for Additive Manufacturing, KE funds via University of Sheffield EPSRC Impact Acceleration Account funding |
Amount | £19,168 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 07/2023 |
End | 03/2024 |
Description | Application of machine-learning and dynamic X-ray imaging for optimisation of laser additive manufacturing (Lee, UCL) |
Amount | £72,000 (GBP) |
Funding ID | MG23702-1 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 02/2020 |
End | 02/2020 |
Description | Beamtime (University of Manchester - Additive repairing for turbine blisk aerofoils) |
Amount | £54,000 (GBP) |
Funding ID | 27479 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start |
Description | Beamtime (University of Manchester - Additive repairing for turbine blisk aerofoils) |
Amount | £72,000 (GBP) |
Funding ID | 27479 |
Organisation | Institut Laue–Langevin |
Sector | Academic/University |
Country | France |
Start |
Description | Beamtime (University of Manchester - Determination of residual stress in additive repaired turbine blisk aerofoils ) |
Amount | £72,000 (GBP) |
Funding ID | 01-02-0381 |
Organisation | Institut Laue–Langevin |
Sector | Academic/University |
Country | France |
Start | 02/2024 |
End | 02/2024 |
Description | Beamtime (University of Manchester - Mapping the residual stress distribution on additive repaired turbine blisk aerofoils ) |
Amount | £54,000 (GBP) |
Funding ID | MA-6075 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 02/2024 |
End | 02/2024 |
Description | CLA Leung - International SDG Collaboration Program - Solid-State Additive Manufacturing For Recycled Aluminium Alloys |
Amount | £172,490 (GBP) |
Organisation | United Nations (UN) |
Sector | Public |
Country | United States |
Start | 05/2022 |
End | 06/2023 |
Description | CLA Leung - Studentship with the STFC Scientific Machine Learning group: 'Application Of Machine-learning And Sensing Technologies On Additive Manufacturing (ML4AM)' |
Amount | £100,000 (GBP) |
Organisation | Science and Technologies Facilities Council (STFC) |
Sector | Public |
Country | United Kingdom |
Start | 08/2023 |
End | 08/2026 |
Description | CLAL Leung - CA studentship - Impact of powder quality on laser powder bed fusion process |
Amount | £60,000 (GBP) |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Sector | Private |
Country | United States |
Start | 08/2022 |
End | 09/2026 |
Description | Catapult Researcher in Residence - Thermal Metrology at the AFRC RinR ( Willmott J) |
Amount | £67,910 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 01/2018 |
End | 12/2020 |
Description | Connected / Digital Additive Manufacturing (TACDAM) (Panoutsos G, Kadirkamanathan V, Todd I, Katzman M (Sheffield)) |
Amount | £1,071,094 (GBP) |
Funding ID | EP/P030262/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 01/2017 |
End | 12/2018 |
Description | Correlative high speed IR thermography & X-ray radiography of laser additive manufacturing (Lee, UCL) |
Amount | £72,000 (GBP) |
Funding ID | MT15250-1 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 02/2017 |
End | 02/2017 |
Description | DTP Harry Chapman |
Amount | £90,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 08/2022 |
End | 09/2026 |
Description | DTP PhD Studentship (MAPP Aligned) |
Amount | £85,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2020 |
End | 04/2024 |
Description | Dame Julia Higgins Engineering Postdoc Collaborative Research Fund |
Amount | £2,663 (GBP) |
Organisation | Imperial College London |
Sector | Academic/University |
Country | United Kingdom |
Start | 01/2023 |
Description | Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
Amount | £399,163 (GBP) |
Funding ID | EP/W037483/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 11/2022 |
End | 10/2025 |
Description | Development of novel 3D printing Technologies (Todd, Sheffield) |
Amount | £170,135 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 04/2020 |
End | 05/2021 |
Description | Diamond Lightsource |
Amount | £24,000 (GBP) |
Organisation | Diamond Light Source |
Sector | Private |
Country | United Kingdom |
Start |
Description | Digital Research Infrastructure Call |
Amount | £6,562 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2022 |
Description | Digital qualification Platform for Advanced Alloy Components |
Amount | £13,893,451 (GBP) |
Organisation | Aerospace Technology Institute |
Sector | Charity/Non Profit |
Country | United Kingdom |
Start | 01/2023 |
End | 12/2026 |
Description | Digitisation of Powder Manufacturing |
Amount | £46,522 (GBP) |
Organisation | Henry Royce Institute |
Sector | Academic/University |
Country | United Kingdom |
Start | 01/2022 |
End | 03/2023 |
Description | Diode area melting - a novel re-configurable multi-laser approach for efficient additive manufacturing with enhanced thermal process control |
Amount | £629,880 (GBP) |
Funding ID | EP/W024764/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 07/2022 |
End | 02/2025 |
Description | Disrupting Hot Cracking During Laser Additive Manufacturing (Lee, UCL) |
Amount | £72,000 (GBP) |
Funding ID | MT19354-1 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 08/2018 |
End | 09/2018 |
Description | Dynamic multi-modal x-ray imaging |
Amount | € 100,000 (EUR) |
Organisation | European Commission H2020 |
Sector | Public |
Country | Belgium |
Start | 07/2019 |
End | 08/2019 |
Description | Dynamic multi-modal x-ray imaging (DM-MX) for additive manufacturing and beyond |
Amount | £72,000 (GBP) |
Funding ID | MG23760-1 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 03/2020 |
End | 03/2020 |
Description | EPSRC - MAPP Quick Spend (Equipment) |
Amount | £96,000 (GBP) |
Funding ID | EP/X038661/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2022 |
End | 03/2023 |
Description | EPSRC / Royce Y5 Small Equipment Fund |
Amount | £198,900 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 12/2020 |
End | 03/2021 |
Description | EPSRC Doctoral Training Partnership studentship - Development and Application of Chemical Sensing Technology for Additive Manufacturing |
Amount | £93,000 (GBP) |
Funding ID | EP/T517793/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 08/2020 |
End | 08/2024 |
Description | EPSRC IAA: Chemical Imaging device for additive manufacturing processes (EP/R511638/1) |
Amount | £99,924 (GBP) |
Funding ID | EP/R511638/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2020 |
End | 03/2022 |
Description | ESA: Hierarchically structuring space systems from the nano to whole component scale using Synchrotron tuned Additive Manufacturing |
Amount | £71,998 (GBP) |
Organisation | European Space Agency |
Sector | Public |
Country | France |
Start | 03/2020 |
End | 03/2023 |
Description | Engineering for a prosperous nation 'When the drugs don't work - Manufacturing of pathogen defenses' (Majewski C) |
Amount | £149,031 (GBP) |
Funding ID | EP/R036748/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 01/2018 |
End | 01/2019 |
Description | Establishing a Foundation for Artificial Intelligence in Additive Manufacturing |
Amount | £88,480 (GBP) |
Funding ID | 178761 |
Organisation | Henry Royce Institute |
Sector | Academic/University |
Country | United Kingdom |
Start | 03/2023 |
End | 03/2024 |
Description | Extension to MIAMI Flagship Project 2 (Groom, Mumtz, Willmott, Majewski, Sheffield) |
Amount | £42,900 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 11/2019 |
End | 03/2020 |
Description | FORD: HPDC simulation for AM replicas |
Amount | $200,000 (USD) |
Organisation | Ford Motor Company |
Sector | Private |
Country | United States |
Start | 08/2018 |
End | 08/2023 |
Description | Fast, in-situ X-ray imaging of melt pool development of metallic powders by rapid heating (Lee, UCL) |
Amount | £54,000 (GBP) |
Funding ID | EE13641-2 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 08/2016 |
End | 09/2016 |
Description | Fusion CDT studentship (Oxford) |
Amount | £90,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2023 |
End | 09/2027 |
Description | Future Manufacturing Research |
Amount | £146,730 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start |
Description | H2020 - InnovaXN Marie-Curie Action Award, Capturing additive manufacturing's laser-matter interactions |
Amount | £78,261 (GBP) |
Organisation | European Commission H2020 |
Sector | Public |
Country | Belgium |
Start | 08/2020 |
End | 08/2023 |
Description | HEFCE funding for Industrial Strategy MAPP/MIRIAM HEFCE IS (Willmott J, Groom K, Mumtaz K, Majewski C, Todd I) |
Amount | £85,000 (GBP) |
Organisation | Higher Education Funding Council for England |
Sector | Public |
Country | United Kingdom |
Start | 12/2017 |
End | 03/2020 |
Description | High Temperature Joints Fabricated Using Transient Liquids (Saiz, Imperial) DASA funded |
Amount | £6,560,699 (GBP) |
Organisation | Ministry of Defence (MOD) |
Sector | Public |
Country | United Kingdom |
Start | 08/2019 |
End | 04/2020 |
Description | Horizon 2020 - INNOVATION ACTION - FAST TRACK INNOVATION PILOT SCHEME (FTI) - Integradde (Todd I, Panoutsos G, Kadirkamanathan V) |
Amount | £40,451,037 (GBP) |
Funding ID | 820776 |
Organisation | European Commission |
Sector | Public |
Country | European Union (EU) |
Start | 01/2019 |
End | 12/2022 |
Description | IIKE Collaborative R&D Infrared Thermometry (Willmott J) |
Amount | £25,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2017 |
End | 10/2018 |
Description | IIKE Collaborative R&D: Hyperspectral Imaging (Willmott J) |
Amount | £50,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 08/2018 |
End | 08/2019 |
Description | ILL Neutron Source - Beamtime |
Amount | £60,000 (GBP) |
Organisation | ISIS Neutron Source Facility |
Sector | Learned Society |
Country | United Kingdom |
Start |
Description | Impact Acceleration Account (ICL) |
Amount | £80,000 (GBP) |
Organisation | United Kingdom Research and Innovation |
Sector | Public |
Country | United Kingdom |
Start | 11/2023 |
End | 10/2024 |
Description | Impact Acceleration Account (ICL) |
Amount | £80,000 (GBP) |
Organisation | United Kingdom Research and Innovation |
Sector | Public |
Country | United Kingdom |
Start | 11/2023 |
End | 10/2024 |
Description | Impact Acceleration Account 2020-2022 |
Amount | £8,800 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start |
Description | Imperial Fellowships |
Amount | £750,000 (GBP) |
Organisation | Imperial College London |
Sector | Academic/University |
Country | United Kingdom |
Start | 09/2022 |
End | 10/2026 |
Description | In situ evaluation of phase transformation and residual stresses (Lee, UCL) |
Amount | £72,000 (GBP) |
Funding ID | ESRF MA 3971 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 04/2018 |
End | 06/2018 |
Description | Industrial CASE Account - University College London 2019 |
Amount | £780,664 (GBP) |
Funding ID | EP/T517628/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2019 |
End | 09/2024 |
Description | Industrial CASE Account - University of Liverpool 2021 |
Amount | £536,525 (GBP) |
Funding ID | EP/W522193/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 08/2021 |
End | 09/2026 |
Description | Industrial Cooperative Awards in Science & Technology (iCASE) studentship with EPSRC/Renishaw |
Amount | £129,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2021 |
End | 09/2025 |
Description | Industrial Strategy Challenge Funding -MIRIAM (Todd I, Panoutsos G and Willmott J ) |
Amount | £666,383 (GBP) |
Funding ID | 103461 |
Organisation | Innovate Pharmaceuticals Ltd |
Sector | Private |
Country | United Kingdom |
Start | 09/2017 |
End | 03/2019 |
Description | Innovate UK (TSB) TSB KTP |
Amount | £24,591 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start |
Description | Innovate UK - 'Jewelprint - Innovative Jewellery Manufacturing Process using 3D printing' (Mumtaz K, Groom K) |
Amount | £401,528 (GBP) |
Funding ID | 105025 |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 05/2019 |
End | 05/2020 |
Description | Innovate UK - Materials and Manufacturing - 'Fast Step 3 - Swarf Titanium to Engine Parts in 3 steps' (Jackson M) |
Amount | £1,327,001 (GBP) |
Funding ID | 104040 |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 08/2018 |
End | 06/2020 |
Description | Innovate UK, Solid State Cooling |
Amount | £278,883 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 11/2019 |
End | 11/2022 |
Description | Knowledge Exchange Flagship Award - MIAMI (Willmott J, Groom K, Mumtaz K, Majewski C, Todd I, Stillman E (Sheffield)) |
Amount | £195,557 (GBP) |
Organisation | University of Sheffield |
Sector | Academic/University |
Country | United Kingdom |
Start | 06/2017 |
End | 03/2020 |
Description | Knowledge Transfer Partnership - Optimal processes and material for use in the manufacture of footwear using Additive Manufacturing KTP 010747 (Majewski C) |
Amount | £190,258 (GBP) |
Funding ID | KTP010747 |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 08/2017 |
End | 03/2020 |
Description | MAPP Hub - EPSRC Future Manufacturing Hubs Rapid Spend Opportunity |
Amount | £447,486 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 09/2022 |
End | 03/2023 |
Description | MIDAS - Mechanistic understanding of Irradiation Damage in fuel Assemblies |
Amount | £7,226,655 (GBP) |
Funding ID | EP/S01702X/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 04/2019 |
End | 04/2025 |
Description | Made Smarter Innovation - Materials Made Smarter Research Centre |
Amount | £4,049,203 (GBP) |
Funding ID | EP/V061798/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 08/2021 |
End | 02/2025 |
Description | Magflex |
Amount | £557,766 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 01/2019 |
End | 01/2022 |
Description | Making Manufacturing Add Up: In operando X-ray imaging of the layer by layer process during Additive Manufacturing (Lee, UCL) |
Amount | £72,000 (GBP) |
Funding ID | EE16214-1 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 05/2017 |
End | 06/2017 |
Description | Manufacturing by Design |
Amount | £1,612,580 (GBP) |
Funding ID | EP/W003333/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2022 |
End | 09/2027 |
Description | Manufacturing by Design (University of Manchester total) |
Amount | £1,612,580 (GBP) |
Funding ID | EP/W003333/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2022 |
End | 03/2027 |
Description | Materials 4.0 - Digitisation of Powder Manufacturing - DoPoM |
Amount | £32,018 (GBP) |
Organisation | Henry Royce Institute |
Sector | Academic/University |
Country | United Kingdom |
Start | 05/2021 |
End | 03/2022 |
Description | Materials 4.0 - Robust Data-Centric Cyber-Physical Systems for Materials 4.0 |
Amount | £54,647 (GBP) |
Organisation | Henry Royce Institute |
Sector | Academic/University |
Country | United Kingdom |
Start | 01/2022 |
End | 03/2022 |
Description | Materials and Manufacturing - STEP3 MM3 (Jackson M) |
Amount | £507,551 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 03/2018 |
End | 02/2021 |
Description | Metal flow in laser Additive Manufacturing Using X-ray imaging and machine learning |
Amount | £170,347 (GBP) |
Organisation | European Commission H2020 |
Sector | Public |
Country | Belgium |
Start | 02/2021 |
End | 01/2023 |
Description | Metron KTP - Gamma Titanium Aluminide Alloys (TiAl) component manufacture through the use of Additive Manufacturing technology (Mumtaz K & Todd I) |
Amount | £164,329 (GBP) |
Funding ID | 510917 |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 03/2017 |
End | 03/2019 |
Description | Multi-modal imaging of laser-based Additive Manufacturing (Lee, UCL) |
Amount | £108,000 (GBP) |
Funding ID | EE17520-2 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 01/2018 |
End | 01/2018 |
Description | NICOP Living Materials (Saiz E) |
Amount | £254,718 (GBP) |
Funding ID | N62909-18-1-2056 |
Organisation | ONRG Office of Naval Research Global |
Sector | Public |
Country | United States |
Start | 06/2018 |
End | 12/2021 |
Description | Newton Fund UK - Thailand STFC-NARIT |
Amount | £49,163 (GBP) |
Organisation | Science and Technologies Facilities Council (STFC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2020 |
End | 03/2022 |
Description | Novel AM processing: for new functionally graded microstructure materials |
Amount | £66,946 (GBP) |
Funding ID | 183011 |
Organisation | Henry Royce Institute |
Sector | Academic/University |
Country | United Kingdom |
Start | 07/2023 |
End | 08/2024 |
Description | ONR: Transforming Additive Manufacturing via in situ and operando imaging |
Amount | $350,000 (USD) |
Organisation | ONRG Office of Naval Research Global |
Sector | Public |
Country | United States |
Start | 06/2019 |
End | 07/2022 |
Description | OPTICON (Todd, Sheffield) |
Amount | £8,532,872 (GBP) |
Organisation | European Commission H2020 |
Sector | Public |
Country | Belgium |
Start | 01/2017 |
End | 12/2020 |
Description | Optimised High Performance Ductile Cast Iron Using 4D X-ray Analysis And Microstructural Modelling |
Amount | 5,627,953 kr. (DKK) |
Organisation | Independent Research Fund Denmark |
Sector | Public |
Country | Denmark |
Start | 09/2018 |
End | 09/2022 |
Description | PRISMM and Rolls Royce Additive Manufacturing (Todd I, Willmott J) |
Amount | £69,153 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 06/2017 |
End | 03/2018 |
Description | Performance-driven design of Aluminium alloys for Additive Manufacturing (PAAM) |
Amount | £358,183 (GBP) |
Funding ID | EP/W006154/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 01/2023 |
End | 07/2026 |
Description | PhD Project - Robocasting Entropy Stabilised Ultra-High Temperature Ceramics for Hypersonic Applications |
Amount | £106,662 (GBP) |
Organisation | Defence Science & Technology Laboratory (DSTL) |
Sector | Public |
Country | United Kingdom |
Start |
Description | RAEng CiET: Transforming Additive Manufacturing Via Multiscale Imaging (TAMMI) |
Amount | £2,687,000 (GBP) |
Organisation | Royal Academy of Engineering |
Sector | Charity/Non Profit |
Country | United Kingdom |
Start | 03/2019 |
End | 03/2029 |
Description | Rolls Royce/MAPP: Clean Sky 2 WP5.5.1 In-situ beamline analysis of the blown powder process for high temperature materials repair applications |
Amount | £170,951 (GBP) |
Organisation | Rolls Royce Group Plc |
Sector | Private |
Country | United Kingdom |
Start | 05/2017 |
End | 12/2019 |
Description | Rolls Royce/MAPP: In situ beamline experiments LAMPR - 2nd beamtime |
Amount | £60,903 (GBP) |
Organisation | Rolls Royce Group Plc |
Sector | Private |
Country | United Kingdom |
Start | 05/2017 |
End | 12/2019 |
Description | Rolls Royce/MAPP: Synchrotron experiments for in situ observation of ALM processes on CM247 alloy, SoW-DNS207278 |
Amount | £13,619 (GBP) |
Organisation | Rolls Royce Group Plc |
Sector | Private |
Country | United Kingdom |
Start | 05/2017 |
End | 09/2019 |
Description | Rolls Royce/MAPP: iCASE PhD Top-up Rees |
Amount | £40,000 (GBP) |
Organisation | Rolls Royce Group Plc |
Sector | Private |
Country | United Kingdom |
Start | 09/2019 |
End | 09/2023 |
Description | Rolls Royce: ATI Reinstate Programme:Blown powder process for high temperature materials repair applications |
Amount | £90,000 (GBP) |
Organisation | Rolls Royce Group Plc |
Sector | Private |
Country | United Kingdom |
Start | 02/2021 |
End | 07/2021 |
Description | Rolls Royce: Advanced Application Of External Fields To DED Additive Manufacturing - Chapman |
Amount | £40,000 (GBP) |
Organisation | Rolls Royce Group Plc |
Sector | Private |
Country | United Kingdom |
Start | 09/2022 |
End | 09/2026 |
Description | Rolls Royce: In situ beamline experiments and analysis of the blown powder process for repair application: Sinclair PhD Support |
Amount | £40,000 (GBP) |
Organisation | Rolls Royce Group Plc |
Sector | Private |
Country | United Kingdom |
Start | 05/2017 |
End | 09/2021 |
Description | Rolls Royce: In-situ Synchrotron X-ray Investigation Of Blown-powder Laser Additive Manufacturing Of Nickel Superalloys - Cowley |
Amount | £5,000 (GBP) |
Organisation | Rolls Royce Group Plc |
Sector | Private |
Country | United Kingdom |
Start | 09/2022 |
End | 09/2024 |
Description | Royce Collaboration Programme - Alloyed |
Amount | £63,960 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start |
Description | Royce Facility Year 6 - April 2021 to March 2022 |
Amount | £1,011,998 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2021 |
End | 03/2022 |
Description | Royce Facility Year 7 - April 2022 to March 2023 |
Amount | £1,515,512 (GBP) |
Funding ID | 176682 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2022 |
End | 03/2023 |
Description | SECO project with Imperial (Saiz E) |
Amount | £100,000 (GBP) |
Organisation | Swedish Research Council |
Sector | Public |
Country | Sweden |
Start | 09/2016 |
End | 12/2016 |
Description | SPARC: Mitigation of porosity in high pressure and AM |
Amount | £13,774 (GBP) |
Organisation | Scheme for Promotion of Academic and Research Collaboration |
Sector | Academic/University |
Country | India |
Start | 01/2020 |
End | 12/2020 |
Description | SPARC: Mitigation of porosity in high pressure and AM (Lee, UCL) |
Amount | £6,887 (GBP) |
Organisation | UK-India Education and Research Initiative (UKIERI) |
Sector | Academic/University |
Country | United Kingdom |
Start | 01/2020 |
End | 12/2020 |
Description | Sheffield University - Feasibility Study - Digitalisation of Powder Processes => Directed Energy Deposition modular sensing and data framework |
Amount | £26,985 (GBP) |
Organisation | Henry Royce Institute |
Sector | Academic/University |
Country | United Kingdom |
Start | 12/2021 |
End | 03/2022 |
Description | Shining new light on laser additive manufacturing by multi-modal imaging (Lee, UCL) |
Amount | £54,000 (GBP) |
Funding ID | ESRF MA4061 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 03/2018 |
End | 04/2018 |
Description | Silicon carbide / boron carbide ceramic nanocomposites for armour (Saiz, Imperial) |
Amount | £185,383 (GBP) |
Organisation | Defence Science & Technology Laboratory (DSTL) |
Sector | Public |
Country | United Kingdom |
Start | 09/2019 |
End | 09/2022 |
Description | Standards Grant, EPSRC, See More Make More |
Amount | £34,481 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 02/2021 |
End | 01/2025 |
Description | Sustainable advanced manufacturing via machine learning assisted exploitation of sensing and data infrastructure |
Amount | £46,522 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2022 |
Description | Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing (TEAM) |
Amount | £451,915 (GBP) |
Funding ID | EP/W032147/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 01/2023 |
End | 08/2026 |
Description | Tata Steel IIKE Award (Willmott, Sheffield) |
Amount | £45,000 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 03/2018 |
End | 03/2020 |
Description | TiPOW (Titanium Powder for Net-shape Component Manufacture) |
Amount | £1,507,966 (GBP) |
Funding ID | 113051 |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 03/2015 |
End | 02/2020 |
Description | Towards high speed manufacturing of graphene supercapacitors (Groom, Mumtaz, Sheffield) |
Amount | £24,750 (GBP) |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 01/2019 |
End | 01/2020 |
Description | Transforming the Foundation Industries: a Network+ Towards Value by Innovation |
Amount | £2,259,077 (GBP) |
Funding ID | EP/V026402/1 |
Organisation | Engineering and Physical Sciences Research Council (EPSRC) |
Sector | Public |
Country | United Kingdom |
Start | 01/2021 |
End | 12/2023 |
Description | Transpiration Cooling to Enable Sharp Leading Edge Technology |
Amount | £314,033,292 (GBP) |
Organisation | Defense Advanced Research Projects Agency (DARPA) |
Sector | Public |
Country | United States |
Start | 12/2019 |
End | 11/2023 |
Description | Unlocking the potential of laser 3D printing with ultrasound |
Amount | € 212,934 (EUR) |
Organisation | European Commission H2020 |
Sector | Public |
Country | Belgium |
Start | 08/2022 |
End | 08/2024 |
Description | VULCAN (Panoutsos, Willmott and Todd,Sheffield) |
Amount | £267,650 (GBP) |
Organisation | Innovate UK |
Sector | Public |
Country | United Kingdom |
Start | 01/2020 |
End | 12/2021 |
Description | X-ray Imaging and Diffraction of Blown Powder Additive Manufacturing (Lee, UCL) |
Amount | £54,000 (GBP) |
Funding ID | MT20096-2 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 02/2019 |
End | 02/2019 |
Description | X-ray Imaging and Diffraction of Blown Powder Additive Manufacturing (Lee, UCL) |
Amount | £36,000 (GBP) |
Funding ID | MT20096-3 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 04/2019 |
End | 05/2019 |
Description | X-ray Imaging and Diffraction of Blown Powder Additive Manufacturing (Lee, UCL) |
Amount | £90,000 (GBP) |
Funding ID | MT20096-5 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 11/2019 |
End | 12/2019 |
Description | X-ray Imaging and Diffraction of Blown Powder Additive Manufacturing (Lee, UCL) |
Amount | £36,000 (GBP) |
Funding ID | MT20096-4 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 08/2019 |
End | 09/2019 |
Description | X-ray Imaging and Diffraction of Blown Powder Additive Manufacturing (Lee, UCL) |
Amount | £36,000 (GBP) |
Funding ID | MT20096-1 |
Organisation | European Synchrotron Radiation Facility |
Sector | Charity/Non Profit |
Country | France |
Start | 11/2019 |
End | 11/2019 |
Title | Data for 'Is ink heating a relevant concern in the High Speed Sintering process?' |
Description | High Speed Sintering (HSS) is a novel polymer additive manufacturing process which utilises inkjet printing of an infrared-absorbing pigment onto a heated polymer powder bed to create 2D cross-sections which can be selectively sintered using an infrared lamp. Understanding and improving the accuracy and repeatability of part manufacture by HSS are important, ongoing areas of research. In particular, the role of the ink is poorly understood; the inks typically used in HSS have not been optimised for it, and it is unknown whether they perform in a consistent manner in the process. Notably, the ambient temperature inside a HSS machine increases as a side effect of the sintering process, and the unintentional heating to which the ink is exposed is expected to cause changes in its fluid properties. However, neither the extent of ink heating during the HSS process nor the subsequent changes in its fluid properties have ever been investigated. Such investigation is important, since significant changes in ink properties at different temperatures would be expected to lead to inconsistent printing and subsequently variations in part accuracy and even the degree of sintering during a single build. For the first time, we have quantified the ink temperature rise caused by unintentional, ambient heating during the HSS process, and subsequently measured several of the ink's fluid properties across the ink temperature range which is expected to be encountered in normal machine operation (25 to 45 °C). We observed only small changes in the ink's density and surface tension due to this heating, but a significant drop (36%) in its viscosity was seen. By inspection of the ink's Z number throughout printing, it is concluded that these changes would not be expected to change the manner in which droplets are delivered to the powder bed surface. In contrast, the viscosity decrease during printing is such that it is expected that the printed droplet sizes do change in a single build, which may indeed be a cause for concern with regard to the accuracy and repeatability of the inkjet printing used in HSS, and subsequently to the properties of the polymer parts obtained from the process. |
Type Of Material | Database/Collection of data |
Year Produced | 2021 |
Provided To Others? | Yes |
Impact | No impacts - this is a data set accompanying a research paper. |
URL | https://figshare.shef.ac.uk/articles/dataset/Data_for_Is_ink_heating_a_relevant_concern_in_the_High_... |
Title | Data package for "Revealing The Morphology of Ink and Aerosol Jet Printed Palladium-Silver Alloys Fabricated from Metal Organic Decomposition Inks" |
Description | Palladium films hold signicance due to their remarkable affinity for hydrogen diffusion, rendering them valauble for the seperation and purification of hydrogen in membrane reactors. However, palladium is expensive, and its films can become brittle after only a few cycles of hydrogen separation. Alloying with silver has been shown to overcome the problem of palladium embrittlement. Palladium-silver films have been produced via several methods but all have drawbacks, such as difficulties controlling the alloy composition. This study explores two promising jet printing methods: Inkjet and Aerosoljet. Both methods offer potential advantages such as direct patterning, which reduces waste, enables thin film production, and allows for the control of alloy composition. For the first time, palladium-silver alloys have been produced via inkjet printing using a palladium-silver metal organic decomposition (MOD) ink, which alloys at a temperature of 300 °C with nitrogen. Similarly, this study also demonstrates a pioneering approach for Aerosol Jet printing, showing the potential of a novel room-temperature method, for the deposition of palladium-silver MOD inks. This low temperature approach is considered an important development as palladium-silver MOD inks are originally designed for deposition on heated substrates.Contact: SM3 (SEE MORE MAKE MORE) project PI, Professor Cornelia Rodenburg, c.rodenburg@shefield.ac.uk. |
Type Of Material | Database/Collection of data |
Year Produced | 2024 |
Provided To Others? | Yes |
URL | https://orda.shef.ac.uk/articles/dataset/Data_package_for_Revealing_The_Morphology_of_Ink_and_Aeroso... |
Title | Hardness Variation in DED produced Inconel 718 |
Description | Raw data associated with a paper submission. "Hardness Variation in DED produced Inconel 718" submitted to Materialia. Contained are all the raw images used in figures, as well as csv's of any data plotted in graphs. Raw images captured during printing of various processing parameters EBSD scans, Hardness maps and DSC scans of all discussed samples Additionally, Matlab scripts for melt pool thermal fields included, as well as precipitation potential times. |
Type Of Material | Database/Collection of data |
Year Produced | 2022 |
Provided To Others? | Yes |
URL | https://zenodo.org/record/6451774 |
Title | Inconel 718 two ways: Powder Bed Fusion vs. Directed Energy Deposition |
Description | Raw data associated with a paper submission. "Inconel 718 two ways: Powder Bed Fusion vs. Directed Energy Deposition" submitted to Additive Manufacturing Letters. Contained are all the raw data used in the analysis, as well as csv's of any data plotted in graphs. Raw coaxial images captured during printing of various processing parameters Optical Micrographs from which melt pool size and PDAS were measured EBSD scans (.crc and .oip) of all disucssed samples Raw Hardness Data Position/Power logs from the build |
Type Of Material | Database/Collection of data |
Year Produced | 2022 |
Provided To Others? | Yes |
URL | https://zenodo.org/record/7350663 |
Title | SEHI (Secondary Electron Hyperspectral Imaging) dataset of Metal alloy and Carbon film (Palladium Silver Carbon complex film) |
Description | Contact: SM3 (SEE MORE MAKE MORE) project PI, Professor Cornelia Rodenburg, c.rodenburg@shefield.ac.uk.This data repository can be used as benchmark data for the purpose of material characterization, particularly for investigating nanostructures in materials using SEHI (Secondary Electron Hyperspectral Imaging), as well as research in instrumentations (Scanning Electron Microscopy), and advanced image processing and data analysis (computer vision and machine learning) techniques.The complex metal alloy (palladium silver, abbreviated as PdAg) and carbon films were printed by University of Liverpool, and a Helios Nanolab G3 UC microscope was used to acquire the raw image stacks [1]. One can find information from [1] regarding the sample preparation, and experimental conditions. This dataset contains four processed SEHI stacks (cropped), and the associated metadata.[1] Abrams, K.J., Dapor, M., Stehling, N., Azzolini, M., Kyle, S.J., Schäfer, J., Quade, A., Mika, F., Kratky, S., Pokorna, Z., et al., 2019. Making sense of complex carbon and metal/carbon systems by secondary electron hyperspectral imaging. Advanced Science 6, 1900719. |
Type Of Material | Database/Collection of data |
Year Produced | 2023 |
Provided To Others? | Yes |
URL | https://figshare.shef.ac.uk/articles/dataset/SEHI_Secondary_Electron_Hyperspectral_Imaging_dataset_o... |
Title | SEHI (Secondary Electron Hyperspectral Imaging) dataset of Metal alloy and Carbon film (Palladium Silver Carbon complex film) |
Description | Contact: SM3 (SEE MORE MAKE MORE) project PI, Professor Cornelia Rodenburg, c.rodenburg@shefield.ac.uk.This data repository can be used as benchmark data for the purpose of material characterization, particularly for investigating nanostructures in materials using SEHI (Secondary Electron Hyperspectral Imaging), as well as research in instrumentations (Scanning Electron Microscopy), and advanced image processing and data analysis (computer vision and machine learning) techniques.The complex metal alloy (palladium silver, abbreviated as PdAg) and carbon films were printed by University of Liverpool, and a Helios Nanolab G3 UC microscope was used to acquire the raw image stacks [1]. One can find information from [1] regarding the sample preparation, and experimental conditions. This dataset contains four processed SEHI stacks (cropped), and the associated metadata.[1] Abrams, K.J., Dapor, M., Stehling, N., Azzolini, M., Kyle, S.J., Schäfer, J., Quade, A., Mika, F., Kratky, S., Pokorna, Z., et al., 2019. Making sense of complex carbon and metal/carbon systems by secondary electron hyperspectral imaging. Advanced Science 6, 1900719. |
Type Of Material | Database/Collection of data |
Year Produced | 2023 |
Provided To Others? | Yes |
URL | https://figshare.shef.ac.uk/articles/dataset/SEHI_Secondary_Electron_Hyperspectral_Imaging_dataset_o... |
Title | Variation of texture anisotropy and hardness with build parameters and through height in direct energy deposited 316L steel |
Description | Raw data associated with a paper submission.
"Variation of texture anisotropy and hardness with build parameters and through height in direct energy deposited 316L steel" submitted to Additive Manufacturing. Contained are all the raw images used in figures, as well as csv's of any data pltoted in graphs. Raw images captured during printing of various processing parameters EBSD scans (.ctf) of all disucssed samples Wall definitions (EBSD compared to paper) Wall 1 - Wall A1 300 W 2750 mm/s Wall 2 - Wall D 500 W 2250 mm/s Wall 3 - Wall B 300 W 2250 mm/s Wall 4 - Wall C 500 W 2750 mm/s Wall 5 - Wall A2 300 W 2750 mm/s |
Type Of Material | Database/Collection of data |
Year Produced | 2020 |
Provided To Others? | Yes |
URL | https://zenodo.org/record/3957923 |
Title | Variation of texture anisotropy and hardness with build parameters and wall height in directed-energy-deposited 316L steel |
Description | Raw data associated with a paper submission.
" Variation of texture anisotropy and hardness with build parameters and wall height in directed-energy-deposited 316L steel" submitted to Additive Manufacturing. Contained are all the raw images used in figures, as well as csv's of any data pltoted in graphs. Raw images captured during printing of various processing parameters EBSD scans (.ctf) of all disucssed samples Wall definitions (EBSD compared to paper) Wall 1 - Wall A1 300 W 2750 mm/s Wall 2 - Wall D 500 W 2250 mm/s Wall 3 - Wall B 300 W 2250 mm/s Wall 4 - Wall C 500 W 2750 mm/s Wall 5 - Wall A2 300 W 2750 mm/s |
Type Of Material | Database/Collection of data |
Year Produced | 2020 |
Provided To Others? | Yes |
URL | https://zenodo.org/record/3957922 |
Description | 1 Rolls Royce staff visit to Manchester University for MAPP meeting |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | 1 Rolls Royce staff visit to Manchester University for MAPP meeting |
Collaborator Contribution | 1 Rolls Royce staff visit to Manchester University for MAPP meeting |
Impact | 1 Rolls Royce staff visit to Manchester University for MAPP meeting |
Start Year | 2022 |
Description | 2 Carpenter Additive Staff hosted visit of Leeds University and Sheffield University for 1/2 day |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | 2 Carpenter Additive Staff hosted visit of Leeds University and Sheffield University for 1/2 day |
Collaborator Contribution | 2 Carpenter Additive Staff hosted visit of Leeds University and Sheffield University for 1/2 day |
Impact | 2 Carpenter Additive Staff hosted visit of Leeds University and Sheffield University for 1/2 day |
Start Year | 2022 |
Description | 2 Carpenter Additive Staff visited Leeds University for a MAPP meeting |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | 2 Carpenter Additive Staff visited Leeds University for a MAPP meeting |
Collaborator Contribution | 2 Carpenter Additive Staff visited Leeds University for a MAPP meeting |
Impact | 2 Carpenter Additive Staff visited Leeds University for a MAPP meeting |
Start Year | 2022 |
Description | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on Additive Layer Manufacturing projects |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on Additive Layer Manufacturing projects |
Collaborator Contribution | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on Additive Layer Manufacturing projects |
Impact | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on Additive Layer Manufacturing projects |
Start Year | 2022 |
Description | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on FAST projects |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on FAST projects |
Collaborator Contribution | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on FAST projects |
Impact | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on FAST projects |
Start Year | 2022 |
Description | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on Field Assisted Sintering Technology and Directed Energy Deposition projects |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on Field Assisted Sintering Technology and Directed Energy Deposition projects |
Collaborator Contribution | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on Field Assisted Sintering Technology and Directed Energy Deposition projects |
Impact | 3 Rolls Royce staff visit to Sheffield University for MAPP meeting on Field Assisted Sintering Technology and Directed Energy Deposition projects |
Start Year | 2022 |
Description | 5 Kg of Powder (Scalmalloy) for FAST feasibility. UoS / Carpenter Additive |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | 5 Kg of Powder (Scalmalloy) for FAST feasibility (S. Graham) |
Collaborator Contribution | 5 Kg of Powder (Scalmalloy) for FAST feasibility (S. Graham) |
Impact | 5 Kg of Powder (Scalmalloy) for FAST feasibility (S. Graham) |
Start Year | 2022 |
Description | 5 batches of different Aluminium and titanium powder grades sent to Leeds University - 5 kg each batch at £200 / kg powder |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | 5 batches of different Aluminium and titanium powder grades sent to Leeds University - 5 kg each batch at £200 / kg powder |
Collaborator Contribution | 5 batches of different Aluminium and titanium powder grades sent to Leeds University - 5 kg each batch at £200 / kg powder |
Impact | 5 batches of different Aluminium and titanium powder grades sent to Leeds University - 5 kg each batch at £200 / kg powder |
Start Year | 2022 |
Description | A collaboration with The University of Sheffield Advanced Manufacturing Research Centre (AMRC) to acquire selective laser melting data and its corresponding X-ray computed tomography scans |
Organisation | Nuclear Advanced Manufacturing Research Centre |
Country | United Kingdom |
Sector | Charity/Non Profit |
PI Contribution | A collaboration with The University of Sheffield Advanced Manufacturing Research Centre (AMRC) to acquire selective laser melting data and its corresponding X-ray computed tomography scans. Collaboration with ACSE. |
Collaborator Contribution | A collaboration with The University of Sheffield Advanced Manufacturing Research Centre (AMRC) to acquire selective laser melting data and its corresponding X-ray computed tomography scans |
Impact | A collaboration with The University of Sheffield Advanced Manufacturing Research Centre (AMRC) to acquire selective laser melting data and its corresponding X-ray computed tomography scans |
Start Year | 2022 |
Description | AMS CDT 2022 Rolls Royce Top-up (Jackson) - Development of enhanced titanium alloys from recycled powder through the FAST processing route |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | PhD Researcher |
Collaborator Contribution | Financial and industrial expertise |
Impact | Ongoing |
Start Year | 2023 |
Description | Aeromet (with University of Sheffield) |
Organisation | Aeromet International |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects(eg Air3D) |
Collaborator Contribution | Input into development of R&D applications and projects (eg Air3D) |
Impact | Developed relationship further with Aeromet requesting their Input into development of R&D applications and projects (Air3D) |
Start Year | 2019 |
Description | Airbus (with University of Sheffield) |
Organisation | Airbus Group |
Country | France |
Sector | Academic/University |
PI Contribution | Research project on Conform of Ti-6Al-4V machining swarf into wire |
Collaborator Contribution | Funding of research project 'Conform of Ti-6Al-4V machining swarf into wire' |
Impact | Research collaboration developed with Airbus |
Start Year | 2017 |
Description | Analysis of Additively Manufactured Titanium Fatigue Test Pieces using X-ray Computer Tomography |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Analysis of Additively Manufactured Titanium Fatigue Test Pieces using X-ray Computer Tomography |
Collaborator Contribution | Materials/equipment |
Impact | No impact yet |
Start Year | 2021 |
Description | Analysis of Metal Powders and Additively Repaired Aerofoils for Blisk repair using X-ray Computer Tomography |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Analysis of Metal Powders and Additively Repaired Aerofoils for Blisk repair using X-ray Computer Tomography |
Collaborator Contribution | Materials/equipment |
Impact | No impact yet |
Start Year | 2021 |
Description | Arcelor Mitall (with Imperial College London) Electrophoretic deposition of graphene on steel |
Organisation | ArcelorMittal |
Country | Luxembourg |
Sector | Private |
PI Contribution | Electrophoretic deposition of graphene on steel (1 year project) |
Collaborator Contribution | Electrophoretic deposition of graphene on steel (1 year project) |
Impact | Development of research and development collaboration with Arcelor Mittal. |
Start Year | 2019 |
Description | Atomising Systems Ltd (with University of Leeds) |
Organisation | Atomising Systems |
Country | United Kingdom |
Sector | Private |
PI Contribution | Expertise in measuring and modelling powder flows (University of Leeds) |
Collaborator Contribution | powder and powder production expertise (Atomising Systems Ltd) |
Impact | Development of research collaboration with Atomising Systems Ltd |
Start Year | 2019 |
Description | BAE (with University of Sheffield) |
Organisation | BAE Systems |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Input into development of R&D applications and projects |
Collaborator Contribution | Input into development of R&D applications and projects |
Impact | Developed relationship further with BAE requesting their Input into development of R&D applications and projects (eg Air3D) |
Start Year | 2019 |
Description | Carbolite Gero (with University of Sheffield) |
Organisation | Carbolite Gero |
Country | United Kingdom |
Sector | Private |
PI Contribution | Provided an exhibition space for Carbolite Gero at University of Sheffield, for them to have the opportunity to discuss their products with University staff. |
Collaborator Contribution | Carbolite Gero paid an amount for the exhibition space, |
Impact | Developed relationship with Carbolite Gero, and enabled discussions between this supplier and University staff including MAPP staff. |
Start Year | 2019 |
Description | Cash contribution to PhD project (Kubra Genc) Magnetic Materials |
Organisation | HiETA Technologies Limited |
Country | United Kingdom |
Sector | Private |
PI Contribution | PhD Research - magnetic materials |
Collaborator Contribution | Funding of PhD Research - magnetic materials |
Impact | Cash contribution to PhD project (Kubra Genc) Magnetic Materials PhD Research |
Start Year | 2020 |
Description | Collaborator input for approved IAA stage 1 trial - characterisation of powders and parts for polymer AM |
Organisation | Malvern Panalytical |
Country | United Kingdom |
Sector | Private |
PI Contribution | Collaborator input for approved IAA stage 1 trial - characterisation of powders and parts for polymer AM |
Collaborator Contribution | Collaborator input for approved IAA stage 1 trial - characterisation of powders and parts for polymer AM |
Impact | Collaborator input for approved IAA stage 1 trial - characterisation of powders and parts for polymer AM |
Start Year | 2020 |
Description | Collaborator input for approved IAA stage 1 trial - characterisation of powders and parts for polymer AM |
Organisation | Netzsch Instruments |
Country | United States |
Sector | Private |
PI Contribution | Collaborator input for approved IAA stage 1 trial - characterisation of powders and parts for polymer AM |
Collaborator Contribution | Collaborator input for approved IAA stage 1 trial - characterisation of powders and parts for polymer AM |
Impact | Collaborator input for approved IAA stage 1 trial - characterisation of powders and parts for polymer AM |
Start Year | 2020 |
Description | Culham Centre for Fusion Energy (CCFE) (with University of Oxford) |
Organisation | Culham Centre for Fusion Energy |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Research collaboration with CCFE and Oxford |
Collaborator Contribution | Research collaboration with CCFE and Oxford |
Impact | Research collaboration with University of Oxford |
Start Year | 2019 |
Description | DSTL (with University of Sheffield) PhD studentship |
Organisation | Defence Science & Technology Laboratory (DSTL) |
Country | United Kingdom |
Sector | Public |
PI Contribution | PhD project (James Pepper) |
Collaborator Contribution | Funding of PhD Research Project with Martin Jackson |
Impact | PhD Research project - Additive Manufacturing with Martin Jackson |
Start Year | 2019 |
Description | Develop W coating on EUROFER 97 Steel with UKAEA. Collaboration with Oxford University |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Joint research on sintering W coating on EUROFER 97 steels |
Collaborator Contribution | Joint research on sintering W coating on EUROFER 97 steels |
Impact | Trials on W coating on EUROFER 97 steels |
Start Year | 2022 |
Description | Develop of multi material sintering methods. Collaboration between Dr Friesch and Oxford University |
Organisation | Dr Fritsch |
Country | Germany |
Sector | Private |
PI Contribution | Joint research on sintering powder. |
Collaborator Contribution | Joint research on sintering powder |
Impact | Joint research on sintering powder |
Start Year | 2021 |
Description | Development of MgWOxB Ceramic Neutron Shielding Material - CASC group at Imperial University |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Development of MgWOxB Ceramic Neutron Shielding Material - CASC group at Imperial University |
Collaborator Contribution | Development of MgWOxB Ceramic Neutron Shielding Material - CASC group at Imperial University |
Impact | Development of MgWOxB Ceramic Neutron Shielding Material - CASC group at Imperial University |
Start Year | 2021 |
Description | Diamond Centre Wales (with University of Sheffield) JewelPrint |
Organisation | Diamond Centre Wales |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Input into development of R&D applications and projects. |
Impact | Research collaboration developed through Jewel Print project at University of Sheffield. |
Start Year | 2019 |
Description | Direct PhD funding |
Organisation | Saudi Basic Industries Corporation |
Country | Saudi Arabia |
Sector | Private |
PI Contribution | Direct PhD funding |
Collaborator Contribution | Direct PhD funding |
Impact | Direct PhD funding |
Start Year | 2020 |
Description | Effect of Powder ageing on Polymer performance in PBF |
Organisation | Malvern Panalytical |
Country | United Kingdom |
Sector | Private |
PI Contribution | Ageing of powders, production of High Speed Sintered parts, mechanical testing. |
Collaborator Contribution | Material characterisation of powders and parts. |
Impact | No impact yet |
Start Year | 2020 |
Description | Effect of Powder ageing on Polymer performance in PBF |
Organisation | Netzsch Instruments |
Country | United States |
Sector | Private |
PI Contribution | Ageing of powders, production of High Speed Sintered parts, mechanical testing. |
Collaborator Contribution | Material characterisation of powders and parts. |
Impact | No impact yet |
Start Year | 2020 |
Description | Expertise,loan of DLP printer, consumables (photopolymers)-DLP - Photocentric |
Organisation | Photocentric |
Country | United Kingdom |
Sector | Private |
PI Contribution | Expertise,loan of DLP printer, consumables (photopolymers)-DLP |
Collaborator Contribution | Expertise,loan of DLP printer, consumables (photopolymers)-DLP |
Impact | Expertise,loan of DLP printer, consumables (photopolymers)-DLP |
Start Year | 2020 |
Description | Exploratory Research Project - Jiangsu Delin Environment Protection Technology |
Organisation | Jiangsu Delin Environment Protection Technology Co Ltd |
Country | China |
Sector | Private |
PI Contribution | Exploratory Research Project |
Collaborator Contribution | Exploratory Research Project |
Impact | Exploratory Research Project |
Start Year | 2020 |
Description | FAST consolidation of Nb-Si powders UoS/Rolls Royce |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | FAST consolidation of Nb-Si powders UoS/Rolls Royce |
Collaborator Contribution | FAST consolidation of Nb-Si powders UoS/Rolls Royce |
Impact | FAST consolidation of Nb-Si powders UoS/Rolls Royce |
Start Year | 2022 |
Description | FAST consolidation of Nb-Si powders produced by arc melting |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Active TRL1/2 research on NbSi alloy processing using arc melting and FAST |
Collaborator Contribution | Weekly meetings and technical advice, advice on future property targets for NbSi |
Impact | Continued NbSi research in 2022. More feasibility projects with Manchester (XCT) through same technical contacts |
Start Year | 2021 |
Description | FAST consolidation of Nb-Si powders produced by arc melting. UoS / Rolls Royce |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | FAST consolidation of Nb-Si powders produced by arc melting. UoS / Rolls Royce |
Collaborator Contribution | FAST consolidation of Nb-Si powders produced by arc melting. UoS / Rolls Royce |
Impact | FAST consolidation of Nb-Si powders produced by arc melting. UoS / Rolls Royce |
Start Year | 2022 |
Description | HIPping Fe-Ti alloys |
Organisation | Monash University |
Country | Australia |
Sector | Academic/University |
PI Contribution | HIPping Fe-Ti alloys |
Collaborator Contribution | HIPping Fe-Ti alloys |
Impact | HIPping Fe-Ti alloys |
Start Year | 2022 |
Description | IAB chair (Hugh Hamilton) 1/2 day catch up and visit to RDC |
Organisation | Johnson Matthey |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into the development of R&D applications and projects. |
Collaborator Contribution | Engagement opportunity. |
Impact | Input into the development of R&D applications and projects. |
Start Year | 2022 |
Description | Imperial College London - UKAEA Consultancy Round 2 |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Academic expertise through consultancy advice |
Collaborator Contribution | Financial contribution |
Impact | Consultancy advice given to partner. |
Start Year | 2022 |
Description | Imperial College London collaboration with DSTL (High entropy carbides) |
Organisation | Defence Science & Technology Laboratory (DSTL) |
Country | United Kingdom |
Sector | Public |
PI Contribution | Imperial have funding from DSTL for High Entropy Carbides from Oct 2022 to March 2026 (3.5 yrs) |
Collaborator Contribution | Imperial have funding from DSTL for High Entropy Carbides from Oct 2022 to March 2026 (3.5 yrs) |
Impact | Imperial have funding from DSTL for High Entropy Carbides from Oct 2022 to March 2026 (3.5 yrs) |
Start Year | 2022 |
Description | Imperial College London collaboration with ESA (Bioinspired Composite Materials Based On Synthetic Mother of Pearl for Space Applications) ESA ITT 10934 |
Organisation | European Space Agency |
Country | France |
Sector | Public |
PI Contribution | Erik Poloni, Florian Bouville, Eduardo Saiz |
Collaborator Contribution | Azimut Space is a partner, they are funded by ESA. |
Impact | Collaboration ongoing. |
Start Year | 2022 |
Description | Imperial College London collaboration with UKAEA (Scalable manufacturing of tungsten boride neutron shielding) |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | "Scalable manufacturing of tungsten boride neutron shielding" with proposed funding of £100K. |
Collaborator Contribution | "Scalable manufacturing of tungsten boride neutron shielding" with proposed funding of £100K. |
Impact | Scalable manufacturing of tungsten boride neutron shielding |
Start Year | 2021 |
Description | Imperial/Jiangsu Delin Environment Protection Technology - DLP Manufacturing of a Microfluidic Chip |
Organisation | Jiangsu Delin Environment Protection Technology Co Ltd |
Country | China |
Sector | Private |
PI Contribution | Additive manufacturing of a microfluidic chip to test water quality |
Collaborator Contribution | Provide designs |
Impact | New additive manufacturing process for ceramics |
Start Year | 2019 |
Description | Imperial/MCT - Additive manufacturing of carbides |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Development of additive manufacturing process for non-oxide ceramics |
Collaborator Contribution | Upscale of manufacturing process |
Impact | New additive manufacturing process for ceramics |
Start Year | 2019 |
Description | Imperial/Photocentric - DLP of ceramics |
Organisation | Photocentric |
Country | United Kingdom |
Sector | Private |
PI Contribution | Development of additive manufacturing process for non-oxide ceramics |
Collaborator Contribution | Provide photocurable materials, equipment and advice |
Impact | New additive manufacturing process for ceramics |
Start Year | 2019 |
Description | Imperial/Rolls-Royce - The effect of fibre interface chemistry and thickness on CMC mechanical and environmental performance |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Micromechanical characterizations of CMC |
Collaborator Contribution | Provide materials |
Impact | No outputs |
Start Year | 2021 |
Description | Imperial/SECO Tools - Hard materials for cutting tools: analysis of carbide boundary character and strength in cemented carbide. |
Organisation | SECO Tools |
Country | United Kingdom |
Sector | Private |
PI Contribution | Micromechanical testing of carbide tools |
Collaborator Contribution | Fabrication of cutting tools |
Impact | 1 paper published, new characterization technologies developed. |
Start Year | 2019 |
Description | Imperial/UKAEA - Cold sintering of materials for fusion technologies |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Cold sintering process for materials for fusion |
Collaborator Contribution | Provide guidelines and discuss progress |
Impact | Cold sintering process developed. |
Start Year | 2020 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Alfa Laval AB |
Country | Sweden |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Atomising Systems |
Country | United Kingdom |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Boeing |
Country | United States |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Freeman Technology |
Country | United Kingdom |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Jaguar Land Rover Automotive PLC |
Department | Jaguar Land Rover |
Country | United Kingdom |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Knowledge Transfer Network |
Country | United Kingdom |
Sector | Charity/Non Profit |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Malvern Panalytical |
Country | United Kingdom |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Phoenix Scientific Industries (UK) Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Quintus Technologies |
Country | Sweden |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry Attendance at MAPP Second International Conference - 28th and 29th June 2023 |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | The MAPP Second International Conference was held on 28th and 29th June 2023 in Sheffield. The conference contained presentations from MAPP Researchers and Industry Speakers, an Early Career Flash Presentation Session and a Poster Competition. The conference was attended by over 120 delegates from academia and Industry. |
Collaborator Contribution | Delegates from the companies listed attended the conference and/or gave a presentation. |
Impact | Networking and further research opportunities with the industries involved. |
Start Year | 2023 |
Description | Industry partner tours of Factory 2050/Royce Transactional Centre at MAPP/CAM2 conference on 6 October 2022 |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | Industry partner tours of Factory 2050/Royce Transactional Centre at MAPP/CAM2 conference on 6 October 2022 |
Collaborator Contribution | Industry partner tours of Factory 2050/Royce Transactional Centre at MAPP/CAM2 conference on 6 October 2022 |
Impact | Industry partner tours of Factory 2050/Royce Transactional Centre at MAPP/CAM2 conference on 6 October 2022 |
Start Year | 2022 |
Description | Industry partner tours of Factory 2050/Royce Transactional Centre at MAPP/CAM2 conference on 6 October 2022 |
Organisation | Thermocalc |
Country | Sweden |
Sector | Private |
PI Contribution | Industry partner tours of Factory 2050/Royce Transactional Centre at MAPP/CAM2 conference on 6 October 2022 |
Collaborator Contribution | Industry partner tours of Factory 2050/Royce Transactional Centre at MAPP/CAM2 conference on 6 October 2022 |
Impact | Industry partner tours of Factory 2050/Royce Transactional Centre at MAPP/CAM2 conference on 6 October 2022 |
Start Year | 2022 |
Description | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Collaborator Contribution | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Impact | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Start Year | 2022 |
Description | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Collaborator Contribution | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Impact | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Start Year | 2022 |
Description | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Organisation | Thermocalc |
Country | Sweden |
Sector | Private |
PI Contribution | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Collaborator Contribution | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Impact | Industry presentations at MAPP/CAM2 conference - Workshop on Artificial Intelligence in Additive Manufacture - 5 October 2022 |
Start Year | 2022 |
Description | Joining of dissimilar metals using the powder interlayer bonding technique |
Organisation | Swansea University |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Design of experiments, materials characterisation with scanning electron microscopy |
Collaborator Contribution | Application of the powder interlayer bonding technique to manufacture test coupons |
Impact | Joint publications in development. |
Start Year | 2022 |
Description | Low temperature sintering of neutron shielding materials |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Developing low temperature sintering of carbides for neutron shielding applications |
Collaborator Contribution | Provide advice on compositions and materials evaluation |
Impact | Developing low temperature sintering of carbides for neutron shielding applications |
Start Year | 2022 |
Description | Lucideon |
Organisation | Lucideon |
Country | United Kingdom |
Sector | Private |
PI Contribution | Flash sintering of CMCs testing |
Collaborator Contribution | Equipment and technical expertise contributed |
Impact | Ongoing collaboration |
Start Year | 2018 |
Description | Lucy Farquhar - Understanding Additive Manufacturing for Aerospace - 4 year PhD on designing a High Entropy Alloy funded through the Centre Doctoral Training with £17500 P.A. top-up from Boeing |
Organisation | Boeing |
Country | United States |
Sector | Private |
PI Contribution | Lucy Farquhar - Understanding Additive Manufacturing for Aerospace - 4 year PhD on designing a High Entropy Alloy funded through the Centre Doctoral Training with £17500 P.A. top-up from Boeing |
Collaborator Contribution | Lucy Farquhar - Understanding Additive Manufacturing for Aerospace - 4 year PhD on designing a High Entropy Alloy funded through the Centre Doctoral Training with £17500 P.A. top-up from Boeing |
Impact | Lucy Farquhar - Understanding Additive Manufacturing for Aerospace - 4 year PhD on designing a High Entropy Alloy funded through the Centre Doctoral Training with £17500 P.A. top-up from Boeing |
Start Year | 2019 |
Description | MAPP HVMC partner - Advanced Forming Research Centre (AFRC) |
Organisation | University of Strathclyde |
Department | Advanced Forming Research Centre |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Input into development of R&D applications and projects. Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Hosting MAPP investigator via Catapult Researcher in Residence scheme. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP HVMC partner - Advanced Manufacturing Research Centre (AMRC) |
Organisation | University of Sheffield |
Department | Advanced Manufacturing Research Centre (AMRC) |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Co-location of facilities between AMRC's National Metals Technology Centre and the Royce Translation Centre in Sheffield - development of equipment specifications and portfiolio. Input into development of R&D applications and projects. Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Staff time on project. Co-location of facilities between AMRC's National Metals Technology Centre and the Royce Translation Centre in Sheffield - development of equipment specifications and portfiolio. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP HVMC partner - Centre for Process Innovation (CPI) |
Organisation | Centre for Process Innovation (CPI) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP HVMC partner - Manufacturing Technology Centre (MTC) |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. Advisory role on projects (ATI DRAMA). Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Partner on collaborative R&D - sponsorship of PhD students. PhD in Sheffield. Sit on MAPP Industrial Advisory Board. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP HVMC partner - Nuclear Advanced Manufacturing Research Centre (NAMRC) |
Organisation | Nuclear Advanced Manufacturing Research Centre |
Country | United Kingdom |
Sector | Charity/Non Profit |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP HVMC partner - Warwick Manufacturing Group (WMG) |
Organisation | University of Warwick |
Department | Warwick Manufacturing Group |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP Image Competition - Sponsorship and Judging Panel |
Organisation | Freeman Technology |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP Image Competition. All MAPP stakeholders invited to submit images. Event sponsored by Freeman Technology and Verder Scientific. |
Collaborator Contribution | MAPP Image Competition. All MAPP stakeholders invited to submit images. Event sponsored by Freeman Technology and Verder Scientific. |
Impact | New images received for MAPP for use in MAPP promotional materials. |
Start Year | 2021 |
Description | MAPP Image Competition - Sponsorship and Judging Panel |
Organisation | Verder Group |
Department | Verder Scientific |
Country | Germany |
Sector | Private |
PI Contribution | MAPP Image Competition. All MAPP stakeholders invited to submit images. Event sponsored by Freeman Technology and Verder Scientific. |
Collaborator Contribution | MAPP Image Competition. All MAPP stakeholders invited to submit images. Event sponsored by Freeman Technology and Verder Scientific. |
Impact | New images received for MAPP for use in MAPP promotional materials. |
Start Year | 2021 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | GKN |
Department | GKN Aerospace |
Country | United Kingdom |
Sector | Private |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | Johnson Matthey |
Country | United Kingdom |
Sector | Private |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | Wayland Additive |
Country | United Kingdom |
Sector | Private |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | Weir Group plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2020 |
Organisation | Xaar plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Collaborator Contribution | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Impact | The membership of IAB shall be appointed by the MAPP Executive Board. It's Chair and Deputy Chair shall we decided by the IAB and the appointments ratified by the MAPP Executive Board The IAB brings together senior figures from MAPP's industry and High Value Manufacturing Catapult HVMC partners. The IAB will appraise and advise on the research programme to ensure the link to industry's longer-term challenges The IAB will appraise and advise on the impact activities to maximise the opportunities for knowledge exchange and ensure the Hub delivers impact for UK industry The IAB will advise on and help support the development and growth of MAPP, including its leadership role within the national research and innovation landscape. To review the hub's performance relative to other National and International equivalents The IAB will meet twice annually: An annual one-day face to face meeting - held over two days - at the MAPP Conference or MAPP Dissemination Event - joint with the Scientific Advisory Board One mid-year remote meeting via teleconference or videoconference. |
Start Year | 2020 |
Description | MAPP Industrial Advisory Board - Attendance 2021 |
Organisation | GKN |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Provision of expertise, materials and analysis. |
Impact | No outputs |
Start Year | 2021 |
Description | MAPP Industrial Advisory Board - Attendance 2021 |
Organisation | Johnson Matthey |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Provision of expertise, materials and analysis. |
Impact | No outputs |
Start Year | 2021 |
Description | MAPP Industrial Advisory Board - Attendance 2021 |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Provision of expertise, materials and analysis. |
Impact | No outputs |
Start Year | 2021 |
Description | MAPP Industrial Advisory Board - Attendance 2021 |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Provision of expertise, materials and analysis. |
Impact | No outputs |
Start Year | 2021 |
Description | MAPP Industrial Advisory Board - Attendance 2021 |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Provision of expertise, materials and analysis. |
Impact | No outputs |
Start Year | 2021 |
Description | MAPP Industrial Advisory Board - Attendance 2021 |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Provision of expertise, materials and analysis. |
Impact | No outputs |
Start Year | 2021 |
Description | MAPP Industrial Advisory Board - Attendance 2021 |
Organisation | Wayland Additive |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Provision of expertise, materials and analysis. |
Impact | No outputs |
Start Year | 2021 |
Description | MAPP Industrial Advisory Board - Attendance 2021 |
Organisation | Weir Group plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Provision of expertise, materials and analysis. |
Impact | No outputs |
Start Year | 2021 |
Description | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Organisation | Alloyed |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Collaborator Contribution | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Impact | Provision of expertise, materials and analysis to the MAPP project. |
Start Year | 2022 |
Description | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Organisation | GKN |
Department | GKN Aerospace |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Collaborator Contribution | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Impact | Provision of expertise, materials and analysis to the MAPP project. |
Start Year | 2022 |
Description | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Organisation | Johnson Matthey |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Collaborator Contribution | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Impact | Provision of expertise, materials and analysis to the MAPP project. |
Start Year | 2022 |
Description | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Collaborator Contribution | MAPP Industrial Advisory Board Meeting - 14 November 2022 |
Impact | Provision of expertise, materials and analysis to the MAPP project. |
Start Year | 2022 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Additive Industries B.V. |
Country | Netherlands |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Boeing |
Department | Phantom Works |
Country | United States |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Centre for Process Innovation (CPI) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Ford Motor Company |
Department | Ford UK |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Freeman Technology |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Liberty Steel |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Malvern Panalytical |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Meenakshi Academy of Higher Education and Research |
Country | India |
Sector | Academic/University |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Metalysis Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Oxford Instruments |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Photocentric |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | SECO Tools |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Siemens AG |
Department | Siemens plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | University of Sheffield |
Department | Advanced Manufacturing Research Centre (AMRC) |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Wayland Additive |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Industry Partner Day - July 2020 |
Organisation | Weir Group plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Engagement Opportunity - Organised MAPP Industry Partner Day |
Collaborator Contribution | Engagement Opportunity - MAPP Industry Partner Day attendance |
Impact | Engagement Opportunity |
Start Year | 2020 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Atomising Systems |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Carl Zeiss AG |
Country | Germany |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Centre for Process Innovation (CPI) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Freeman Technology |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Johnson Matthey |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | LPW Technology Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Metalysis Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Morgan Advanced Materials |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Nuclear Advanced Manufacturing Research Centre |
Country | United Kingdom |
Sector | Charity/Non Profit |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | PSI |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Photocentric |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | SECO Tools |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | University of Sheffield |
Department | Advanced Manufacturing Research Centre (AMRC) |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Research Meeting - with Industry Partners 26.01.2021 |
Organisation | Weir Group plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Invited MAPP industry partners to the Quarterly Researchers Meeting. Researchers presented their projects and invited questions and collaboration. |
Collaborator Contribution | Attendance at the MAPP Quarterly Review meeting to hear update presentations from MAPP Researchers. Input into development of R&D applications and projects. Engagement Opportunity |
Impact | Follow up meetings arranged. |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | Centre for Process Innovation (CPI) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | GKN |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | High Value Manufacturing Catapult |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | Johnson Matthey |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | LPW Technology Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | Morgan Advanced Materials |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | University of Warwick |
Department | WMG |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | Wayland Additive |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners Jan 22 |
Organisation | Weir Group plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | High Value Manufacturing Catapult |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | Johnson Matthey |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | LPW Technology Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | Morgan Advanced Materials |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | SECO Tools |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | University of Warwick |
Department | WMG |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | Weir Group plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP Quarterly Review Meeting with Industry Partners July 21 |
Organisation | Xaar plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Engagement Opportunity |
Impact | Engagement Opportunity |
Start Year | 2021 |
Description | MAPP industry partner - Element 6 |
Organisation | De Beers Group |
Department | Element Six |
Country | Luxembourg |
Sector | Private |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - Freeman Technology |
Organisation | Freeman Technology |
Country | United Kingdom |
Sector | Private |
PI Contribution | Supply of materials for testing. Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. Leeds Uni (2019 offered expertise in measuring and modelling powder flows |
Collaborator Contribution | Provision of powder testing, analysis and support to develop methods. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. Sponsorship of the MAPP First International Conference. Offered Leeds Uni (2019) Measurement equipment expertise |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - GKN Aerospace |
Organisation | GKN |
Department | GKN Aerospace |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into partner R&D programmes and bid development. Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. Expertise in powder modelling(Leeds Uni) |
Collaborator Contribution | Sponsorship of Director RAEng Chair; support for PhD studentships; partner on aligned collaborative R&D projects (financial contribution & further funding). Sit on MAPP Industrial Advisory Board. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. Leeds Uni - Materials and expert/discussion |
Impact | Our research activities are supporting the industrialisation of manufacturing processes within the business, including troubleshooting challenges at higher TRLs and informing decisions on the company's technology selection and capital spending. |
Start Year | 2015 |
Description | MAPP industry partner - Johnson Matthey |
Organisation | Johnson Matthey |
Country | United Kingdom |
Sector | Private |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Sit on MAPP Industrial Advisory Board. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - LPW/Carpenter |
Organisation | LPW Technology Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into partner R&D programmes. Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Sit on MAPP Industrial Advisory Board. Partner in aligned collaborative R&D grants and applications. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | Our collaboration is supporting the development of LPW's strategy around use of data in materials supply chain and implementation of industrial IoT technologies. |
Start Year | 2015 |
Description | MAPP industry partner - Maher |
Organisation | Meenakshi Academy of Higher Education and Research |
Country | India |
Sector | Academic/University |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - Metalysis |
Organisation | Metalysis Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Partner on aligned collaborative R&D projects (TACDAM - further funding). Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. Sponsorship of AAMS (Alloys for Additive Manufacturing Symposium) at 3/4 September 2018 & Presentation (inkind contribution of time) provided by Ian Mellor of Metalysis for AAMS. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - Morgan Advanced Materials |
Organisation | Morgan Advanced Materials |
Country | United Kingdom |
Sector | Private |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. Sponsorship of CASC consortium in the last two years (master students) -materials and expertise |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - PSI |
Organisation | Population Services International |
Country | United States |
Sector | Charity/Non Profit |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - Renishaw |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Sit on MAPP Industrial Advisory Board. Contribution of equipment and data into the programme. Partner on collaborative R&D programmes (TACDAM - further funding). Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - Rolls-Royce |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Activities at multiple MAPP sites (Sheffield and Manchester). Input into partner R&D programmes and bid development. Hosting research teams on site. Input into development of R&D applications and projects. Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Activities at multiple MAPP sites (Sheffield and Manchester). Partner on collaborative R&D projects; contract R&D work; sponsorship of PhD students; embedded staff on site at Sheffield; input into specifications on procurement of capital equipment. Sit on MAPP Industrial Advisory Board. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | Our research activities are helping Rolls-Royce better understand powder materials used in additive manufacturing processes and and are leading to changes in material specifications for these manufacturing process |
Start Year | 2015 |
Description | MAPP industry partner - SECO |
Organisation | SECO Tools |
Country | United Kingdom |
Sector | Private |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. SECO co-funding a project with PhD student at Imperial College London ( their contribution is £70k) for 3.5 years. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - Weir |
Organisation | Weir Group plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into partner R&D programmes. Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Partner on collaborative research programme. Sit on MAPP Industrial Advisory Board. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP industry partner - Xaar |
Organisation | Xaar plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Facilitation of MAPP partner workshop & follow up meetings - discussion of core research programme to develop collaborations. |
Collaborator Contribution | Sit on MAPP Industrial Advisory Board. Participation in MAPP partner workshop and follow on meetings to identify and agree key areas of interest across the core research programme to develop collaborations. |
Impact | n/a |
Start Year | 2015 |
Description | MAPP/Royce workshop visit to AFRC - 3 staff 1/2 day and 1 senior staff all day |
Organisation | University of Strathclyde |
Department | Advanced Forming Research Centre |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | MAPP/Royce workshop visit to AFRC - 3 staff 1/2 day and 1 senior staff all day |
Collaborator Contribution | MAPP/Royce workshop visit to AFRC - 3 staff 1/2 day and 1 senior staff all day |
Impact | MAPP/Royce workshop visit to AFRC - 3 staff 1/2 day and 1 senior staff all day |
Start Year | 2022 |
Description | MCT - Additive Manufacturing of Carbides. Analysis of Carbide Boundary Character and Strength in Cemented Carbide |
Organisation | Composite Metal Technologies |
Country | United Kingdom |
Sector | Private |
PI Contribution | MCT - Additive Manufacturing of Carbides. Analysis of Carbide Boundary Character and Strength in Cemented Carbide. Collaboration with Imperial College London. |
Collaborator Contribution | MCT - Additive Manufacturing of Carbides. Analysis of Carbide Boundary Character and Strength in Cemented Carbide |
Impact | No impact yet |
Start Year | 2022 |
Description | MTC (with University of Manchester) Collaboration to create miniture HIP cans |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Research Collaboration to create miniture HIP cans |
Collaborator Contribution | Research Collaboration to create miniture HIP cans |
Impact | Research collaboration with MTC and University of Sheffield. |
Start Year | 2017 |
Description | Manchester Metropolitan University (with University of Manchester) |
Organisation | Manchester Metropolitan University |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | coating of powder without charging |
Collaborator Contribution | magneton sputtering research work |
Impact | bringing in other UK academic institution |
Start Year | 2019 |
Description | Material sample to try |
Organisation | Addmaster (UK) Ltd, Staffordshire Technology Park |
Country | United Kingdom |
Sector | Private |
PI Contribution | Material sample to try |
Collaborator Contribution | Material sample to try |
Impact | Material sample to try |
Start Year | 2020 |
Description | McMaster University Canada ( with UCL) AM processing of elemental powders to form alloys in situ |
Organisation | McMaster University |
Country | Canada |
Sector | Academic/University |
PI Contribution | A joint project to develop the AM processing of elemental powders to form alloys in situ, reducing the cost of production of bespoke powders whilst increasing recyclability. Multiple Bi-laterial visits, up to 1 week in duration (Prof. Lee to McMaster; Prof. Phillion to UCL@Harwell & ESRF) |
Collaborator Contribution | A joint project to develop the AM processing of elemental powders to form alloys in situ, reducing the cost of production of bespoke powders whilst increasing recyclability. Multiple Bi-laterial visits, up to 1 week in duration (Prof. Lee to McMaster; Prof. Phillion to UCL@Harwell & ESRF) |
Impact | A joint project to develop the AM processing of elemental powders to form alloys in situ, reducing the cost of production of bespoke powders whilst increasing recyclability. This project supports Farheen Ahmed a MSc student's research project and has contributed to a conference paper and oral presentation at the TMS 2020 |
Start Year | 2017 |
Description | Mechanical characterisation of materials fabricated by additive manufacturing |
Organisation | National Institute of Applied Sciences of Lyon |
Country | France |
Sector | Academic/University |
PI Contribution | Developing new approaches to additive manufacture of composites |
Collaborator Contribution | Support in mechanical testing |
Impact | Developing new approaches to additive manufacture of composites |
Start Year | 2022 |
Description | Model based multi objective optimisation for AM - George Panoutsos |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Model based multi objective optimisation for AM - George Panoutsos |
Collaborator Contribution | Model based multi objective optimisation for AM - MTC |
Impact | No impact yet |
Start Year | 2020 |
Description | New Academic Partner (with UCL) The Royal Melbourne Institute of Technology (RMIT) University |
Organisation | University of Melbourne |
Country | Australia |
Sector | Academic/University |
PI Contribution | Project to investigate crack formation mechanisms in Al-based alloys via the addition of inoculants |
Collaborator Contribution | Support part of David Rees's PhD Scholarship |
Impact | A publication under preparation. |
Start Year | 2018 |
Description | New Academic Partner David Colins, University of Birmingham |
Organisation | University of Birmingham |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | in situ ded experiement |
Collaborator Contribution | co-development of data analysis techniques |
Impact | Collaboration paper submitted. |
Start Year | 2020 |
Description | New Academic Partner EPSRC - Harwell XPS National Facility |
Organisation | MRC Harwell |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Collaboration on AM powder surface characterisation |
Collaborator Contribution | Access to XPS analysis and support on materials characterisations for several additive manufacturing projects |
Impact | Collaboration paper in preparation |
Start Year | 2018 |
Description | New Academic Partner MINH-SON (SON) PHAM, Imperial College London |
Organisation | Imperial College London |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | in situ ded experiment and analysis |
Collaborator Contribution | new alloy development |
Impact | Collaboration paper in preparation. |
Start Year | 2019 |
Description | New Academic Partner Mondragon University |
Organisation | University of Mondragón |
Country | Spain |
Sector | Academic/University |
PI Contribution | Performing XRD experiments and analysing experimental data for use in models |
Collaborator Contribution | Modelling Near Solidus Forming for Industrial applications |
Impact | Collaboration paper in preparation. |
Start Year | 2019 |
Description | New Academic Partner Natalia Shevchenko - Helmholtz-Zentrum Dresden-Rossendorf |
Organisation | Helmholtz Association of German Research Centres |
Department | Helmholtz-Zentrum Dresden-Rossendorf |
Country | Germany |
Sector | Academic/University |
PI Contribution | In situ experiment for Freckle |
Collaborator Contribution | Equipment developer and experimental design |
Impact | No outcomes yet. |
Start Year | 2019 |
Description | New Academic Partner Queen's University at Kingston |
Organisation | Queen's University |
Country | Canada |
Sector | Academic/University |
PI Contribution | Provision of expertise, materials, analysis and experiments |
Collaborator Contribution | Visiting scientist |
Impact | No outcomes yet. |
Start Year | 2020 |
Description | New Academic Partner STFC - ISIS neutron source |
Organisation | Science and Technologies Facilities Council (STFC) |
Department | ISIS Neutron and Muon Source |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Perform in situ imaging of additive manufacturing experiments |
Collaborator Contribution | Access to equipment - Provide a wide range of material characterisation suite, including XRF, XRD, etc. |
Impact | Collaboration paper in preparation |
Start Year | 2017 |
Description | New Academic Partner Thomas Niendorf, Universität Kassel |
Organisation | University of Kassel |
Country | Germany |
Sector | Academic/University |
PI Contribution | in situ diffraction experiment and analysis |
Collaborator Contribution | new alloy development |
Impact | ESRF beamtime awarded |
Start Year | 2019 |
Description | New Academic Partner UK Atomic Energy Authority |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Support on a beam time experiment to study additive manufacturing of Tungsten |
Collaborator Contribution | Co-written several funding proposals with our team; provide insights into additive manufacturing technology for fusion sectors |
Impact | Funding proposals |
Start Year | 2019 |
Description | New Academic Partner UKRI - Scientific Technology Facilities Council -Scientific - Central laser facility |
Organisation | Rutherford Appleton Laboratory |
Department | Central Laser Facility |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Leading an Engineering Physical Science Research Council (EPSRC) Impact Acceleration Account project (EP/R511638/1): 'CHemical imaging device for Additive Manufacturing Processes (CHAMP)' (~£99k); Supervise a student via the EPSRC Doctoral Training Partnership studentship (EP/N509577/1 and EP/T517793/1): 'Development and Application of Chemical Sensing Technology for Additive Manufacturing' (~£93k) |
Collaborator Contribution | Provide expertise in laser spectroscopy and co-supervise PhD student / PDRA; provide support on raman spectroscopy |
Impact | No outcomes yet. |
Start Year | 2015 |
Description | New Industry Partner (with UCL) Advanced Photon Source (APS), Argonne National Laboratory |
Organisation | Argonne National Laboratory |
Country | United States |
Sector | Public |
PI Contribution | A two years joint development project on laser additive manufacturing functionally graded structures via in situ alloying. |
Collaborator Contribution | Visit by Prof. Lee, 4xPDRA's, 3xPhD stds to Argone labs for 3 person months in total spent there |
Impact | N/a |
Start Year | 2018 |
Description | New Industry Partner (with UCL) Diamond Light Source |
Organisation | Diamond Light Source |
Country | United Kingdom |
Sector | Private |
PI Contribution | Development of in situ rigs |
Collaborator Contribution | "A long-term large facility grant on the development of X-ray Imaging and Diffraction for blown powder additive manufacturing. This project supports 3 early career researchers and 6 PhD students. A short-term project on "Application of machine-learning and dynamic X-ray imaging for optimisation of laser additive manufacturing" This project supports 2 early career researchers and 3 PhD students." |
Impact | "Dr Atwood from Diamond has been appointed Honourary Lecturer at UCL and has now visited extensively, and is co-supervising PhD students on MAPP MAPP Academics have spent over year of person time at Diamond Light Source performing experiments." |
Start Year | 2018 |
Description | New Industry Partner (with UCL) European Space Agency |
Organisation | European Space Agency |
Country | France |
Sector | Public |
PI Contribution | Multiple Bi-laterial visits, up to 1 week in duration (Prof. Lee to ESTEC; INCOMING IND: Dr Mesinar to UCL@Harwell) and Co-funding of a Ph.D. studentship on "Hierarchically structuring space systems from the nano to whole component scale using Synchrotron tuned Additive Manufacturing" |
Collaborator Contribution | Partner is co-funding a Ph.D. studentship on "Hierarchically structuring space systems from the nano to whole component scale using Synchrotron tuned Additive Manufacturing" |
Impact | PhD Studentship |
Start Year | 2018 |
Description | New Industry Partner (with UCL) European Synchrotron Radiation Facility (ESRF) |
Organisation | European Synchrotron Radiation Facility |
Country | France |
Sector | Charity/Non Profit |
PI Contribution | Development of correlative X-ray imaging and diffraction to study microstructural evolution during powder bed fusion additive manufacturing. This work is part of deliverable for the EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder Processes (MAPP) and supports 3 early career researchers and 6 PhD students. |
Collaborator Contribution | Joint studentship on "Capturing additive manufacturing's laser-matter interactions" between ESRF, UCL, and Rolls Royce plc. (UK) |
Impact | Visitis to ESRF for Two x 1 wk long out-going visits by Prof. Lee, 3xPDRA's, 3xPhD stds (for 2 person months in total spent there) |
Start Year | 2018 |
Description | New Industry Partner (with UCL) HRL laboratories |
Organisation | HRL Laboratories, LLC |
Country | United States |
Sector | Private |
PI Contribution | Perform in situ syne experiments |
Collaborator Contribution | Provision of expertise, materials and analysis |
Impact | Publication in preparation |
Start Year | 2017 |
Description | New Industry Partner (with UCL) LPW |
Organisation | LPW Technology Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Collaboration on recyclability of powders for AM |
Collaborator Contribution | Provision of expertise, materials and analysis |
Impact | n/a |
Start Year | 2018 |
Description | New Industry Partner (with UCL) Office of Naval Research (ONR) |
Organisation | US Navy |
Department | US Office of Naval Research Global |
Country | United States |
Sector | Academic/University |
PI Contribution | Develop control algorithms via correlating synchrotron imaging to optical/IR/DIC, and development of novel zero-defect alloys using insights gained from synchrotron studies |
Collaborator Contribution | Funding of a UCL Design Engineer S. Marussi (Eng.), UCL Research Fellow, Samuel Clark (RF) and Oregon State University PhD Student. |
Impact | Multiple Incoming visits, Dr Goldwasser, ONR |
Start Year | 2018 |
Description | New Industry Partner (with UCL) Oxford Lasers Ltd. |
Organisation | Oxford Lasers Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Application of ultrafast optical imaging to AM |
Collaborator Contribution | Provision of expertise, materials and analysis |
Impact | n/a |
Start Year | 2018 |
Description | New Industry Partner (with UCL) Photron Ltd. |
Organisation | Photron Europe |
Country | United Kingdom |
Sector | Private |
PI Contribution | Application of ultrafast optical imaging to AM |
Collaborator Contribution | Support of beamtimes via loaning of high speed camera and working together on optics. |
Impact | n/a |
Start Year | 2018 |
Description | New Industry Partner (with UCL) Rolls-Royce |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Funded studentship on blown powder additive manufacturing for blisk repair |
Collaborator Contribution | n/a |
Impact | Our research activities are helping Rolls-Royce better understanding microstructural feature formation mechanisms in additive manufacturing processes and and are leading to changes in production practices for these manufacturing process |
Start Year | 2016 |
Description | New Industry Partner (with UCL) Sandvik Osprey |
Organisation | Sandvik Osprey Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP Fisrt International Conference - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2017 |
Description | New Industry Partner (wuth UCL) Ford |
Organisation | Ford Motor Company |
Country | United States |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned research project (direct funded) |
Impact | N/a |
Start Year | 2018 |
Description | New Industry Partner European Space Agency |
Organisation | European Space Agency |
Country | France |
Sector | Public |
PI Contribution | Provide data to verify a new multiphase, multiphysics simulation of laser powder bed fusion technology |
Collaborator Contribution | Development of next-generation digital twins. |
Impact | Collaboration paper in preparation |
Start Year | 2018 |
Description | New Industry Partner Gowtham Soundarapandiyan - The Welding Insitute (TWI) |
Organisation | TWI The Welding Institue |
Country | United Kingdom |
Sector | Private |
PI Contribution | Surface roughness analysis and image processing data |
Collaborator Contribution | Providing powder and porosity study |
Impact | No outcomes yet. |
Start Year | 2019 |
Description | New Industry Partner Oxford Polymer Group |
Organisation | University of Oxford |
Department | Department of Materials |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Study Ti-6Al-4V and TPGDA adhesion - Surface roughness and adhesion analysis |
Collaborator Contribution | TPGDA printing via R2R systems |
Impact | No outcomes yet. |
Start Year | 2019 |
Description | New Industry Partner Reaction engines |
Organisation | Reaction Engines |
Country | United Kingdom |
Sector | Private |
PI Contribution | Provide expert opinions on in situ monotiring of additive manufacturing process |
Collaborator Contribution | Co-develop new materials and processing technology for laser powder bed fusion technology in the aerospace sector |
Impact | No outcomes yet. |
Start Year | 2021 |
Description | New Industry Partner Renishaw |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | Provision of research staff, expertise, materials and experiments |
Collaborator Contribution | Provision of research equipment and expertise |
Impact | No outcomes yet. |
Start Year | 2020 |
Description | New Industry Partner UKRI (with UCL) - Scientific Technology Facilities Council - Central laser facility |
Organisation | Rutherford Appleton Laboratory |
Department | Central Laser Facility |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | To co-develop a laser additive manufacturing process replicator that can be used for in situ X-ray imaging of powder bed fusion additive manufacturing. |
Collaborator Contribution | To co-develop a laser additive manufacturing process replicator that can be used for in situ X-ray imaging of powder bed fusion additive manufacturing. This work supports an early career researcher to complete his PhD |
Impact | 6 academic awards, 3 high-impact presentations, over 40 oral presentations, and over 10 large facility proposals. Royal Academy of Engineering Chair in Emerging Technologies Fellowship (ca. £2.6M) for Prof. Peter D.Lee. |
Start Year | 2016 |
Description | New Industry Partner UKRI (with UCL) - Scientific Technology Facilities Council -Scientific - machine learning (Sci-ML) group |
Organisation | Science and Technologies Facilities Council (STFC) |
Country | United Kingdom |
Sector | Public |
PI Contribution | "Joint supervision of an early career researcher, on In situ flaw defection in Laser Additive Manufacturing via Machine Learning, Data Fusion and Imaging Correlation. S Support two early career researchers on the application of machine-learning in feature recognition for X-ray images. " |
Collaborator Contribution | "Joint supervision of an early career researcher, on In situ flaw defection in Laser Additive Manufacturing via Machine Learning, Data Fusion and Imaging Correlation. S Support two early career researchers on the application of machine-learning in feature recognition for X-ray images. " |
Impact | Dr Thiyagalingam from Diamond has been appointed Honourary Lecturer at UCL and is now visiting regularly, and is co-supervising a PDRA on MAPP |
Start Year | 2019 |
Description | New Partner Access |
Organisation | Access |
Country | Germany |
Sector | Public |
PI Contribution | Provision of in situ synchrotron data to inform and validate models |
Collaborator Contribution | Provision of modelling expertise and software to simulate AM processes |
Impact | No outcomes yet. |
Start Year | 2020 |
Description | New collaboration with "ATL-Advanced Coating Solutions" to coat SiC fiber and analyse the coating chemistry. |
Organisation | Archer Tehnicoat Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | New collaboration with "ATL-Advanced Coating Solutions" to coat SiC fibre and analyse the coating chemistry. Collaboration with Imperial College London. |
Collaborator Contribution | New collaboration with "ATL-Advanced Coating Solutions" to coat SiC fibre and analyse the coating chemistry. Collaboration with Imperial College London. |
Impact | No outputs to date. |
Start Year | 2022 |
Description | New industry partner - Autodesk |
Organisation | Autodesk |
Country | United States |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D projects (AIRLIFT - due to start next ResearchFish reporting year) |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - BeAM |
Organisation | European Organization for Nuclear Research (CERN) |
Department | Beam Instrumentation Group |
Country | Switzerland |
Sector | Public |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Bentley Motors |
Organisation | Bentley Motors |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (FASTSTEP 3 - due to start next ResearchFish reporting year) |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Braskema America Inc |
Organisation | Braskema America Inc |
Country | United States |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned research project (direct funded) |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - CFMS |
Organisation | Centre Modelling and Simulation (CFMS) |
Country | United Kingdom |
Sector | Charity/Non Profit |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D projects (AIRLIFT - due to start next ResearchFish reporting year) |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Force Technology |
Organisation | Force Technology A/S |
Country | Denmark |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (FASTSTEP 3 - due to start next ResearchFish reporting year) |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Ford |
Organisation | Ford Motor Company |
Country | United States |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned research project (direct funded) |
Impact | n/a |
Start Year | 2016 |
Description | New industry partner - Granutools |
Organisation | Granutools |
Country | Belgium |
Sector | Private |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - HiETA Technologies |
Organisation | HiETA Technologies Limited |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (TACDAM - further funding) |
Impact | n/a |
Start Year | 2016 |
Description | New industry partner - Inovar Communications |
Organisation | Inovar Communications Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship AAMS (Alloys for Additive Manufacturing Symposium) held on 3rd and 4th September 2018 - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. Sponsorship of AAMS (Alloys for Additive Manufacturing Symposium) held on 3rd and 4th September 2018. |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Insphere |
Organisation | Insphere Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (TACDAM - further funding) |
Impact | n/a |
Start Year | 2016 |
Description | New industry partner - KTN |
Organisation | Knowledge Transfer Network |
Country | United Kingdom |
Sector | Charity/Non Profit |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - LSN Diffusion |
Organisation | LSN Diffusion Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (TACDAM - further funding) |
Impact | n/a |
Start Year | 2016 |
Description | New industry partner - Materialise |
Organisation | Materialise |
Department | Materialise UK Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - McLaren Automotive |
Organisation | McLaren Group |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (TACDAM - further funding) |
Impact | n/a |
Start Year | 2016 |
Description | New industry partner - Northern Automotive Alliance |
Organisation | North East Automotive Alliance |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (FASTSTEP 3 - due to start next ResearchFish reporting year) |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Olympus |
Organisation | Olympus |
Country | Global |
Sector | Private |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Phoenix Materials Testing Ltd |
Organisation | Phoenix Materials Testing Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Reliance Precision |
Organisation | Reliance Precision Limited |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D projects (MIRIAM, MIAMI - further funding) |
Impact | n/a |
Start Year | 2016 |
Description | New industry partner - Retsch |
Organisation | Retsch GmbH |
Country | Germany |
Sector | Private |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship Alloys for Additive Manufacturing Symposium - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. Sponsorship of the Alloys for Additive Manufacturing Symposium 3/4th September |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Sandvik Osprey |
Organisation | Sandvik Osprey Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Siemens |
Organisation | Siemens AG |
Country | Germany |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on collaborative R&D - sponsorship of PhD students. |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Transition International |
Organisation | Transition International Ltd |
Country | Netherlands |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (FASTSTEP 3 - due to start next ResearchFish reporting year) |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Tripal |
Organisation | Tripal Group |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (KTP - further funding) |
Impact | n/a |
Start Year | 2017 |
Description | New industry partner - Victoria Drop Forgings |
Organisation | Victoria Drop Forgings Co Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects. |
Collaborator Contribution | Partner on aligned collaborative R&D project (FASTSTEP 3 - due to start next ResearchFish reporting year) |
Impact | n/a |
Start Year | 2017 |
Description | New partner - University of Nottingham - Manufacturing Metrology Team |
Organisation | University of Nottingham |
Department | Manufacturing Metrology Team |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | MAPP First International Conference - marketing/PR/engagement opportunity via sponsorship |
Collaborator Contribution | Sponsorship of the MAPP First International Conference. |
Impact | n/a |
Start Year | 2017 |
Description | Oerlikon |
Organisation | Oerlikon Group |
Country | Switzerland |
Sector | Private |
PI Contribution | Alloys for Additive Manufacturing - invited Dr Blanka Szost (Head of Additive Manufacturing Competence Centre) to give a keynote speech at the Symposium. Also - Oerlikon took up Marketing/PR opportunity by being one of the sponsors of the symposium (banner displayed) |
Collaborator Contribution | Alloys for Additive Manufacturing - Dr Blanka Szost (Head of Additive Manufacturing Competence Centre) gave a keynote speech at the Symposium. Also - Oerlikon took up Marketing/PR opportunity by being one of the sponsors of the symposium (banner displayed) |
Impact | No outputs as yet. Developed relationship further with AM Centre at Oerlikon. |
Start Year | 2018 |
Description | One Rolls Royce staff visit to Sheffield University for MAPP meeting on XRay Computed Tomography (XCT) and ongoing programmes |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | One Rolls Royce staff visit to Sheffield University for MAPP meeting on XRay Computed Tomography (XCT) and ongoing programmes |
Collaborator Contribution | One Rolls Royce staff visit to Sheffield University for MAPP meeting on XRay Computed Tomography (XCT) and ongoing programmes |
Impact | One Rolls Royce staff visit to Sheffield University for MAPP meeting on XRay Computed Tomography (XCT) and ongoing programmes |
Start Year | 2022 |
Description | Oregon State University (with UCL) |
Organisation | Oregon State University |
Country | United States |
Sector | Academic/University |
PI Contribution | Multiple visits by Prof. Bay to UCL and UCL@Harwell, for up to 3 weeks duration This is a long-term collaboration to apply Prof. Bay's digital image correlation (DIC) and digital volume correlation (DVC) codes, and to co-develop new algorithms with UCL. |
Collaborator Contribution | Multiple visits by Prof. Bay to UCL and UCL@Harwell, for up to 3 weeks duration. This is a long-term collaboration to apply Prof. Bay's digital image correlation (DIC) and digital volume correlation (DVC) codes, and to co-develop new algorithms with UCL. |
Impact | This work has resulted in successful application to ONR for funding of a PDRA at UCL and a PhD student at OSU, as well as a new open source DVC and Diamond-DVC (https://zenodo.org/record/3228175#.XZdBRkZKguE). The application of DVC has been used to study nanoscale strains in loaded whole joints, resulting in a high impact journal in Nature Biomedical (https://www.nature.com/articles/s41551-019-0477-1). |
Start Year | 2017 |
Description | Oxford University Engineering Department / IIL Neutron (France) |
Organisation | Institut Laue–Langevin |
Department | ILL Neutrons for Society |
Country | France |
Sector | Academic/University |
PI Contribution | Oxford University Engineering Department IIL Neutron (France) |
Collaborator Contribution | Unknown |
Impact | Unknown |
Start Year | 2020 |
Description | PhD studentship - HIP Materials - Emmanoul Stavroulakis (just completed). |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | PhD studentship - HIP Materials - Emmanoul Stavroulakis (just completed). |
Collaborator Contribution | PhD studentship - HIP Materials - Emmanoul Stavroulakis (just completed). |
Impact | PhD studentship - HIP Materials - Emmanoul Stavroulakis (just completed). |
Start Year | 2020 |
Description | PhD studentship - HIP Materials - Pawel Stuglik. |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | PhD studentship - HIP Materials - Pawel Stuglik. |
Collaborator Contribution | PhD studentship - HIP Materials - Pawel Stuglik. |
Impact | PhD studentship - HIP Materials - Pawel Stuglik. |
Start Year | 2020 |
Description | PhD studentship - MTC |
Organisation | Manufacturing Technology Centre (MTC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | PhD studentship |
Collaborator Contribution | PhD studentship |
Impact | PhD studentship |
Start Year | 2020 |
Description | PhD top-up (Adv Met CDT with Martin Jackson). |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Student (MAPP-aligned) - Joe Hopkinson - starts PhD on CDT in 2023 for 3 years. |
Collaborator Contribution | Total funds awarded by Rolls-Royce = £24,000 |
Impact | PhD top-up (Adv Met CDT with Martin Jackson). Student (MAPP-aligned) - Joe Hopkinson - starts PhD on CDT in 2023 for 3 years, total funds awarded by Rolls-Royce = £24,000 |
Start Year | 2023 |
Description | Photocentric - DLP of Carbides |
Organisation | Photocentric |
Country | United Kingdom |
Sector | Private |
PI Contribution | Photocentric - DLP of Carbides. Collaboration with Imperial. |
Collaborator Contribution | Photocentric - DLP of Carbides. Collaboration with Imperial. |
Impact | Photocentric - DLP of Carbides. Collaboration with Imperial. |
Start Year | 2022 |
Description | Photocentric - with Imperial College and University of Oxford |
Organisation | Photocentric |
Country | United Kingdom |
Sector | Private |
PI Contribution | Characterizaion of ceramic materials fabricated by 3D printing using visible light curing at Imperial College London |
Collaborator Contribution | Development of 3D printing using visible light with Imperial College London Submitted Eureka Proposal together with Imperial Photocentric have given £7.5k contribution inkind (equipment and technical support) for the work with University of Oxford |
Impact | Ongoing activity |
Start Year | 2018 |
Description | Processing of Copper using DAM (part of EPSRC funded project, IAA) |
Organisation | HiETA Technologies Limited |
Country | United Kingdom |
Sector | Private |
PI Contribution | Processing of Copper using DAM (part of EPSRC funded project, IAA) |
Collaborator Contribution | Processing of Copper using DAM (part of EPSRC funded project, IAA) |
Impact | Processing of Copper using DAM (part of EPSRC funded project, IAA) |
Start Year | 2020 |
Description | Purchase of optical pre-heat system |
Organisation | University of Sheffield |
Department | Advanced Manufacturing Research Centre (AMRC) |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Purchase of optical pre-heat system |
Collaborator Contribution | Purchase of optical pre-heat system |
Impact | Purchase of optical pre-heat system |
Start Year | 2020 |
Description | Rolls Royce 1 day workshop at RDC with MAPP and Manchester University |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Dr Chris Heason and Martyn Jones - 1 day Workshop at RDC with Manchester & MAPP |
Collaborator Contribution | Dr Chris Heason and Martyn Jones - 1 day Workshop at RDC with Manchester & MAPP |
Impact | Dr Chris Heason and Martyn Jones - 1 day Workshop at RDC with Manchester & MAPP |
Start Year | 2023 |
Description | Rolls Royce funded PDRA for 2 years Will Philpott) |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | PDRA Researcher - Will Philpott |
Collaborator Contribution | Financial and Industrial expertise. |
Impact | Research is ongoing at this stage. |
Start Year | 2023 |
Description | Rolls Royce visit to Sheffield University (Future sustainable materials research discussions) |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Neil Glover - 1 day at Sheffield for discussions on future sustainable materials research |
Collaborator Contribution | Neil Glover - 1 day at Sheffield for discussions on future sustainable materials research |
Impact | Neil Glover - 1 day at Sheffield for discussions on future sustainable materials research |
Start Year | 2023 |
Description | Rolls Royce visit to Sheffield University (PhD Discussions) |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Dr Mark Hardy - 1 day at Sheffield for PhD discussions with MAPP-aligned PhD students |
Collaborator Contribution | Dr Mark Hardy - 1 day at Sheffield for PhD discussions with MAPP-aligned PhD students |
Impact | Dr Mark Hardy - 1 day at Sheffield for PhD discussions with MAPP-aligned PhD students |
Start Year | 2023 |
Description | Rolls Royce visits to Sheffield University (Powder Ti Research in repair) |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Martyn Jones - 2 x 1 days at Sheffield for discussions on powder titanium research in repair. |
Collaborator Contribution | Martyn Jones - 2 x 1 days at Sheffield for discussions on powder titanium research in repair. |
Impact | Martyn Jones - 2 x 1 days at Sheffield for discussions on powder titanium research in repair. |
Start Year | 2023 |
Description | Ross & Catherall (with University of Sheffield) |
Organisation | Doncasters Group Ltd |
Department | Ross & Catherall |
Country | United Kingdom |
Sector | Private |
PI Contribution | Input into development of R&D applications and projects |
Collaborator Contribution | Input into development of R&D applications and projects |
Impact | Developed relationship further with Ross & Catherall requesting their Input into development of R&D applications and projects (Air3D) |
Start Year | 2019 |
Description | SECO Tools - hard materials for cutting tools |
Organisation | SECO Tools |
Country | United Kingdom |
Sector | Private |
PI Contribution | SECO Tools - hard materials for cutting tools. Collaboration with Imperial College London. |
Collaborator Contribution | SECO Tools - hard materials for cutting tools |
Impact | SECO Tools - hard materials for cutting tools |
Start Year | 2022 |
Description | Seco employees onsite 1day per month |
Organisation | Seco Group |
Country | Czech Republic |
Sector | Private |
PI Contribution | Seco employees onsite 1day per month |
Collaborator Contribution | Seco employees onsite 1day per month |
Impact | Seco employees onsite 1day per month |
Start Year | 2020 |
Description | Shell Global Solutions International BV |
Organisation | Shell Global Solutions International BV |
Department | Shell Global Solutions UK |
Country | Netherlands |
Sector | Private |
PI Contribution | High Voltage Ceramic Heating |
Collaborator Contribution | High Voltage Ceramic Heating |
Impact | High Voltage Ceramic Heating |
Start Year | 2022 |
Description | Sintering of carbides |
Organisation | Lucideon |
Country | United Kingdom |
Sector | Private |
PI Contribution | Sintering of carbide materials |
Collaborator Contribution | Sintering of carbide materials |
Impact | Sintering of carbide materials |
Start Year | 2022 |
Description | Solar Turbines - Studentship (with University of Sheffield) |
Organisation | Solar Turbines |
Country | United States |
Sector | Private |
PI Contribution | PhD project (Elaine Livera) |
Collaborator Contribution | PhD project (Elaine Livera) - funding studentship |
Impact | PhD Research project - Additive Manufacturing |
Start Year | 2019 |
Description | Sponsorship of CASC consortium in the last two years (master students) -materials and expertise x 2 |
Organisation | Morgan Advanced Materials |
Department | Morgan Technical Ceramics |
Country | United Kingdom |
Sector | Private |
PI Contribution | Sponsorship of CASC consortium in the last two years (master students) -materials and expertise x 2 |
Collaborator Contribution | Sponsorship of CASC consortium in the last two years (master students) -materials and expertise x 2 |
Impact | Sponsorship of CASC consortium in the last two years (master students) -materials and expertise x 2 |
Start Year | 2020 |
Description | Sponsorship of Pablo Rodriguez Lago PhD studentship - Rolls Royce |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Sponsorship of Pablo Rodriguez Lago PhD studentship |
Collaborator Contribution | Sponsorship of Pablo Rodriguez Lago PhD studentship |
Impact | Sponsorship of Pablo Rodriguez Lago PhD studentship |
Start Year | 2018 |
Description | Swansea University / University of Leeds collaboration on Powder Interlayer Bonding |
Organisation | Swansea University |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Swansea Univerisity / University of Leeds collaboration on Powder Interlayer Bonding |
Collaborator Contribution | Swansea Univerisity / University of Leeds collaboration on Powder Interlayer Bonding |
Impact | Swansea Univerisity / University of Leeds collaboration on Powder Interlayer Bonding |
Start Year | 2022 |
Description | TWI Ltd (with University of Manchester) Studentship |
Organisation | TWI ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | PhD project on Additive Manufacturing |
Collaborator Contribution | Funding of PhD Research Project at MAPP, University of Manchester |
Impact | Development of research collaboration with TWI, and funding of studentship. |
Start Year | 2019 |
Description | Technical University Vienna (with University of Manchester) |
Organisation | Vienna University of Technology |
Country | Austria |
Sector | Academic/University |
PI Contribution | coating of powder without charging |
Collaborator Contribution | inkind contribution of £1k |
Impact | Increased awareness of MAPP outside UK |
Start Year | 2019 |
Description | The Royal Melbourne Institute of Technology (RMIT) University, Australia (with UCL) |
Organisation | RMIT University |
Department | School of Engineering |
Country | Australia |
Sector | Academic/University |
PI Contribution | Multiple Bi-laterial visits, up to 1 week in duration (Prof. Lee to RMIT; Prof. Easton to UCL) A joint project to investigate crack formation mechanisms in Al-based alloys via the addition of inoculants, which supports a part of David Rees's PhD project, with a publication under preparation.• This research has led to a proposal being submitted in Australia to develop more iron tolerant alloys. |
Collaborator Contribution | Multiple Bi-laterial visits, up to 1 week in duration (Prof. Lee to RMIT; Prof. Easton to UCL) A joint project to investigate crack formation mechanisms in Al-based alloys via the addition of inoculants, which supports a part of David Rees's PhD project, with a publication under preparation.• This research has led to a proposal being submitted in Australia to develop more iron tolerant alloys. |
Impact | This research has led to a proposal being submitted in Australia to develop more iron tolerant alloys. |
Start Year | 2018 |
Description | Thermocalc |
Organisation | Thermocalc |
Country | Sweden |
Sector | Private |
PI Contribution | Sponsorship - Marketing and PR opportunity at Alloys for Additive Manufacturing held at University of Sheffield on 3/4th September 2018. |
Collaborator Contribution | Sponsorship - Marketing and PR opportunity at Alloys for Additive Manufacturing held at University of Sheffield on 3/4th September 2018. Thermocalc took up the Silver level of Sponsorship. |
Impact | No outputs |
Start Year | 2018 |
Description | UCL and Anna Paradowska, University of Sydney/ANSTO collaboration |
Organisation | Australian Nuclear Science and Technology Organisation |
Country | Australia |
Sector | Public |
PI Contribution | Joint project - Solid-State Additive Manufacturing For Recycled Aluminium Alloys |
Collaborator Contribution | Joint project - Solid-State Additive Manufacturing For Recycled Aluminium Alloys |
Impact | Paper submitted |
Start Year | 2023 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | BritishVolt |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | European Space Research Institute |
Country | Italy |
Sector | Public |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | European Synchrotron Radiation Facility |
Country | France |
Sector | Charity/Non Profit |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | Fraunhofer Society |
Department | Fraunhofer Institute FKIE |
Country | Germany |
Sector | Academic/University |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | Jaguar Land Rover Automotive PLC |
Department | Jaguar Land Rover |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | Johnson Matthey |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | National Composites Centre (NCC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | National Physical Laboratory |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | TISICS |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | The Manufacturing Technogy Centre |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Britishvolt, European Synch Radiation Facility - ESRF, Fraunhofer Institut (Multiple, Grouped), Jaguar Land Rover Limited, Johnson Matthey, National Composites Centre, National Physical Laboratory, Renishaw, Rolls-Royce Plc (UK), The European Space Research and Tech Ctr, The Manufacturing Technology Centre Ltd, TISICS Ltd, UK Atomic Energy Authority, University of Bristol, collaboration |
Organisation | University of Bristol |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Collaborator Contribution | Joint research on creating a International Centre for Manufacturing by Design |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Carpenter Additive collaboration |
Organisation | Carpenter Technology Corporation |
Department | Carpenter Additive |
Country | United States |
Sector | Private |
PI Contribution | Provide training, expertise and research support. |
Collaborator Contribution | Fund a PhD studentship. |
Impact | Joint studentship is ongoing. |
Start Year | 2021 |
Description | UCL and Constellium collaboration |
Organisation | Constellium |
Country | France |
Sector | Private |
PI Contribution | Provide expertise and research support. |
Collaborator Contribution | Provide materials. |
Impact | Joint research proposal and project. |
Start Year | 2021 |
Description | UCL and DLR and ESRF consortium collaboration |
Organisation | European Synchrotron Radiation Facility |
Country | France |
Sector | Charity/Non Profit |
PI Contribution | Provide expertise and research support on nano/holotomography of AM Al alloys under heat treatment. |
Collaborator Contribution | Provide expertise and support on nano/holotomography of AM Al alloys under heat treatment. |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and DLR and ESRF consortium collaboration |
Organisation | German Aerospace Centre (DLR) |
Country | Germany |
Sector | Public |
PI Contribution | Provide expertise and research support on nano/holotomography of AM Al alloys under heat treatment. |
Collaborator Contribution | Provide expertise and support on nano/holotomography of AM Al alloys under heat treatment. |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and European Space Agency (International), European Synch Radiation Facility - ESRF, Renishaw, STFC Laboratories (Grouped) collaboration |
Organisation | European Space Agency |
Country | France |
Sector | Public |
PI Contribution | Joint research on Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
Collaborator Contribution | Joint research on Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and European Space Agency (International), European Synch Radiation Facility - ESRF, Renishaw, STFC Laboratories (Grouped) collaboration |
Organisation | European Synchrotron Radiation Facility |
Country | France |
Sector | Charity/Non Profit |
PI Contribution | Joint research on Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
Collaborator Contribution | Joint research on Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and European Space Agency (International), European Synch Radiation Facility - ESRF, Renishaw, STFC Laboratories (Grouped) collaboration |
Organisation | Renishaw PLC |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
Collaborator Contribution | Joint research on Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and European Space Agency (International), European Synch Radiation Facility - ESRF, Renishaw, STFC Laboratories (Grouped) collaboration |
Organisation | STFC Laboratories |
Country | United Kingdom |
Sector | Public |
PI Contribution | Joint research on Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
Collaborator Contribution | Joint research on Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM) |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Ford, Brunel University London, Oxford Brookes University collaboration |
Organisation | Brunel University London |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
Collaborator Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
Impact | No output yet. |
Start Year | 2023 |
Description | UCL and Ford, Brunel University London, Oxford Brookes University collaboration |
Organisation | Ford Motor Company |
Country | United States |
Sector | Private |
PI Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
Collaborator Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
Impact | No output yet. |
Start Year | 2023 |
Description | UCL and Ford, Brunel University London, Oxford Brookes University collaboration |
Organisation | Oxford Brookes University |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
Collaborator Contribution | Joint research on Performance-driven design of aluminium alloys for additive manufacturing (PAAM). |
Impact | No output yet. |
Start Year | 2023 |
Description | UCL and HiETA collaboration |
Organisation | HiETA Technologies Limited |
Country | United Kingdom |
Sector | Private |
PI Contribution | Provide expertise and research support. |
Collaborator Contribution | Provide processing parameters. |
Impact | Joint research proposal. |
Start Year | 2021 |
Description | UCL and Horiba collaboration |
Organisation | Horiba |
Country | Japan |
Sector | Private |
PI Contribution | Provide expertise and research support on applications of XRF in advanced manufacturing research. |
Collaborator Contribution | Provide expertise and industrial support on applications of XRF in advanced manufacturing research. |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Horiba collaboration |
Organisation | University College London |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Provide expertise and research support on applications of XRF in advanced manufacturing research. |
Collaborator Contribution | Provide expertise and industrial support on applications of XRF in advanced manufacturing research. |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and IPG Photonics collaboration |
Organisation | IPG Photonics (UK) Limited |
Country | United Kingdom |
Sector | Private |
PI Contribution | Provide expertise and research support. |
Collaborator Contribution | Provide materials and expertise. |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and IPG Photonics collaboration |
Organisation | University College London |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Provide expertise and research support. |
Collaborator Contribution | Provide materials and expertise. |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Indian Institute of Technology Bombay collaboration |
Organisation | Indian Institute of Technology Bombay |
Country | India |
Sector | Academic/University |
PI Contribution | Provide training, technical support and intellectual contribution. Hosted visits at Harwell of scholars from IITB. |
Collaborator Contribution | Workshop on in situ X-ray imaging: applications and modelling. |
Impact | Collaboration paper and conference talks. |
Start Year | 2019 |
Description | UCL and Michael Mallon, Gian Lorenzo Casini and Miguel Yagues Palazon from European Space Agency collaboration |
Organisation | European Space Agency |
Department | Harwell Centre |
Country | United Kingdom |
Sector | Public |
PI Contribution | Joint project - Enable active control of surface roughness during advanced manufacturing using laser pulse shaping technologies |
Collaborator Contribution | Joint project - Enable active control of surface roughness during advanced manufacturing using laser pulse shaping technologies |
Impact | Joint PDRA Anastassia Milleret hired. |
Start Year | 2024 |
Description | UCL and Shanghai Jiao Tong University collaboration |
Organisation | Shanghai Jiao Tong University |
Country | China |
Sector | Academic/University |
PI Contribution | Provide expertise and research support. |
Collaborator Contribution | Provide materials. |
Impact | Joint research and beamtime experiment at Advanced Photon Source in the US. |
Start Year | 2021 |
Description | UCL and Siemens collaboration |
Organisation | Siemens AG |
Department | Siemens plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Provide expertise and research support. |
Collaborator Contribution | Provide expertise and research support. |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Greenwich collaboration |
Organisation | University College London |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing |
Collaborator Contribution | Joint research on Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing |
Impact | No output yet. |
Start Year | 2023 |
Description | UCL and University of Greenwich collaboration |
Organisation | University of Greenwich |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing |
Collaborator Contribution | Joint research on Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing |
Impact | No output yet. |
Start Year | 2023 |
Description | UCL and University of Leicester collaboration |
Organisation | University of Leicester |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Provide expertise and research support. |
Collaborator Contribution | Provide expertise and research support - computational support. |
Impact | Joint project to reveal the molten pool dynamics in laser powder bed fusion of polymers. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Advanced Manufacturing Research Centre |
Country | United Kingdom |
Sector | Public |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Alan Turing Institute |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Alloyed |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Brunel University London |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Constellium |
Department | Constellium UK Ltd |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Diamond Light Source |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | ESI Group |
Country | France |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Ferroday |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Gestamp Automoción |
Department | Gestamp Tallent Ltd. |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Knowledge Transfer Network |
Country | United Kingdom |
Sector | Charity/Non Profit |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Materials Processing Institute |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | National Composites Centre (NCC) |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | SECO Tools |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | STFC Laboratories |
Country | United Kingdom |
Sector | Public |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Sheffield City Region Local Economic Partnership |
Department | Sheffield City Region (SCR) Growth Hub |
Country | United Kingdom |
Sector | Public |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | Swansea University |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | TATA Steel |
Department | Tata Limited UK |
Country | United Kingdom |
Sector | Private |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | The Manufacturing Technogy Centre |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | University College London |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | University of Nottingham |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Nottingham, Brunel University London, Swansea University, Advanced Manufacturing Research Centre, Alloyed Limited, Celsa Steel UK, Constellium UK Limited, Diamond Light Source, ESI, Ferroday Ltd, Gestamp Tallent Ltd, Knowledge Transfer Network KTN, Materials Processing Institute (MPI), National Composites Centre, Pro Steel Engineering, Rolls-Royce Plc (UK), Seco Tools, Sheffield City Region, STFC Laboratories (Grouped), Tata Steel, The Alan Turing Institute, The Manufactur |
Organisation | University of Nottingham |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Joint research on creating a Made Smarter Hub |
Collaborator Contribution | Joint research on creating a Made Smarter Hub |
Impact | No output yet. |
Start Year | 2021 |
Description | UCL and University of Shimane collaboration |
Organisation | University of Shimane |
Country | Japan |
Sector | Academic/University |
PI Contribution | Provide expertise and research support. |
Collaborator Contribution | Provide expertise and research support. |
Impact | Joint project to reveal the molten pool dynamics in laser powder bed fusion of polymers. |
Start Year | 2021 |
Description | UCL and University of Warwick collaboration |
Organisation | University of Warwick |
Department | Warwick Evidence |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Provide expertise and research support. |
Collaborator Contribution | Provide polymer characterisation using solid state NMR. |
Impact | No output yet. |
Start Year | 2022 |
Description | UCL and Wentao Yan, National University of Singapore collaboration |
Organisation | National University of Singapore |
Country | Singapore |
Sector | Academic/University |
PI Contribution | Provide expertise on AM experiment and data analytics. |
Collaborator Contribution | Provide expertise on AM modelling. |
Impact | No output yet. |
Start Year | 2023 |
Description | UCL and Xiao Shang, University of Toronto collaboration |
Organisation | University of Toronto |
Country | Canada |
Sector | Academic/University |
PI Contribution | Provision of beamtime experiment, expertise in AM machines, data analysis. |
Collaborator Contribution | Participation in beamtime experiment, expertise in data analysis and AM |
Impact | No output yet. |
Start Year | 2023 |
Description | University of Coventry & TWI (with UCL) |
Organisation | Coventry University |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Two joint projects to understand the impacts of powder oxidation and powder contaminations on additive manufacturing processes and component performance as well as on powder recyclability using in situ X-ray imaging. These research projects support three early career researchers: Gowtham Soundarapandiyan from TWI, Dr. Chu Lun Alex Leung and David Rees (University College London). |
Collaborator Contribution | Two joint projects to understand the impacts of powder oxidation and powder contaminations on additive manufacturing processes and component performance as well as on powder recyclability using in situ X-ray imaging. These research projects support three early career researchers: Gowtham Soundarapandiyan from TWI, Dr. Chu Lun Alex Leung and David Rees (University College London). Visits by Gowtham Soundarapandiyan (PhD student, up to one week) and Prof. Michael Fitzpatrick visited Materials, Structural Manufacturing group at Harwell (MSM@Harwell), University College London and Diamond Light Source for beamtime in Oct 2018 and Feb 2020 |
Impact | These research projects support three early career researchers: Gowtham Soundarapandiyan from TWI, Dr. Chu Lun Alex Leung and David Rees (University College London). |
Start Year | 2019 |
Description | University of Greenwich (and UCL) |
Organisation | University of Greenwich |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Multiple bi-directional visits, including several 1 week visits |
Collaborator Contribution | Multiple bi-directional visits, including several 1 week visits Joint MAPP (UCL and CSC funded) PhD student investigating the application of thermoelectric magnetohydrodynamic control of additive manufacturing microstructure in. |
Impact | Based on this PhD proposal, Xianqiang Fan (PhD candidate) has successfully obtained a China State Council funded scholarship for 4 years, and a beamtimes have been awarded for Feb. and July 2020 |
Start Year | 2019 |
Description | University of Leeds collaboration with Henry Royce Institute, University of Manchester (In-situ imaging of powders packing and flow) |
Organisation | Henry Royce Institute |
Department | Henry Royce Institute – University of Manchester Facilities |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Prepare the specimens and perform preliminary characterisation |
Collaborator Contribution | X-ray imaging and data processing |
Impact | Future publication |
Start Year | 2023 |
Description | University of Leeds collaboration with University of Edinburgh (Effect of temperature on powder flow) |
Organisation | University of Edinburgh |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Measure powders spreadability at different temperatures |
Collaborator Contribution | Measure powders flowability at different temperatures |
Impact | Future publication. |
Start Year | 2023 |
Description | University of Manchester - Residual Stress analysis of Additively Manufactured nickel-based superalloy |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | Residual Stress analysis of Additively Manufactured nickel-based superalloy |
Collaborator Contribution | Residual Stress analysis of Additively Manufactured nickel-based superalloy |
Impact | Residual Stress analysis of Additively Manufactured nickel-based superalloy |
Start Year | 2022 |
Description | University of Manchester and Rolls Royce funded PhD student (Ramsey) |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | PhD student "X-ray Computer Tomography and Microstructural Characterisation of Additive Structures for Advanced Repair of Aeroengine Components" |
Collaborator Contribution | Payments of £14,500 per year for 4 years as industrial contribution to PhD of Ramsey at the University of Manchester. |
Impact | PhD student started. |
Start Year | 2023 |
Description | University of Manchester collaboration with AFRC Strathclyde |
Organisation | University of Strathclyde |
Department | Advanced Forming Research Centre |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Collaborative research pipeline |
Collaborator Contribution | Collaborative research pipeline |
Impact | Journal paper. |
Start Year | 2023 |
Description | University of Manchester collaboration with Monyash University |
Organisation | Monash University |
Country | Australia |
Sector | Academic/University |
PI Contribution | Jie Luo is a post doc at Monash University working with Michael Preuss and she is continuing some work on the CP-Ti with the Fe powder mixed in in terms of understanding the micro mechanics of the materials Jiaqi produced during her PhD at Manchester University |
Collaborator Contribution | Jie Luo is a post doc at Monash University working with Michael Preuss and she is continuing some work on the CP-Ti with the Fe powder mixed in in terms of understanding the micro mechanics of the materials Jiaqi produced during her PhD at Manchester University |
Impact | Jie Luo is a post doc at Monash University working with Michael Preuss and she is continuing some work on the CP-Ti with the Fe powder mixed in in terms of understanding the micro mechanics of the materials Jiaqi produced during her PhD at Manchester University |
Start Year | 2023 |
Description | University of Nottingham (with UCL) |
Organisation | University of Nottingham |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Collaboration charactering AM builds, including functionally graded materials and coatings for directed energy deposition additive manufacturing. Impact has been two papers submitted for publication, with more in preparation Over 20 visits to UCL and Harwell |
Collaborator Contribution | Collaboration charactering AM builds, including functionally graded materials and coatings for directed energy deposition additive manufacturing. Impact has been two papers submitted for publication, with more in preparation Over 20 visits to UCL and Harwell |
Impact | Impact has been two papers submitted for publication, with more in preparation |
Start Year | 2018 |
Description | University of Nottingham (with University of Sheffield) |
Organisation | University of Nottingham |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | This follows on from EPSRC-funded work investigating the potential to produce anti-bacterial parts using polymer Laser Sintering. Previously we have used 'off the shelf' additives, but starting this collaboration gives us the ability to control the composition and behaviour of the additive. |
Collaborator Contribution | This follows on from EPSRC-funded work investigating the potential to produce anti-bacterial parts using polymer Laser Sintering. Previously we have used 'off the shelf' additives, but starting this collaboration gives us the ability to control the composition and behaviour of the additive. |
Impact | This follows on from EPSRC-funded work investigating the potential to produce anti-bacterial parts using polymer Laser Sintering. Previously we have used 'off the shelf' additives, but starting this collaboration gives us the ability to control the composition and behaviour of the additive. |
Start Year | 2019 |
Description | University of Oxford / Oxford Micromechanics Group |
Organisation | University of Oxford |
Department | Department of Materials |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Unknown |
Collaborator Contribution | Unknown |
Impact | Unknown |
Start Year | 2020 |
Description | University of Oxford collaboration with UKAEA (Tungsten coatings on Eurofer steel) |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | Collaboration and developing first wall armour for nuclear fusion reactors |
Collaborator Contribution | Materials and industrial expertise |
Impact | Future publication |
Start Year | 2023 |
Description | University of Oxford collaboration with University of Manchester (FEM simulation of cracking in tungsten coating) |
Organisation | University of Manchester |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Experimental results and validation |
Collaborator Contribution | Modelling of the mechanics of cracking behaviour |
Impact | Future publication |
Start Year | 2022 |
Description | University of Queensland (with UCL) |
Organisation | University of Queensland |
Country | Australia |
Sector | Academic/University |
PI Contribution | Multiple bi-directional visits, including several 1 week visits by Y. Chen (UCL PDRA) to UQ A joint project to perform ex situ characterisation of additive manufactured processed stainless steel and titanium alloys. This work supports an early career researcher, Yunhui Chen, to use a wide range of characterisation suite at University of Queensland. |
Collaborator Contribution | Multiple bi-directional visits, including several 1 week visits by Y. Chen (UCL PDRA) to UQ A joint project to perform ex situ characterisation of additive manufactured processed stainless steel and titanium alloys. This work supports an early career researcher, Yunhui Chen, to use a wide range of characterisation suite at University of Queensland. |
Impact | This work supports an early career researcher, Yunhui Chen, to use a wide range of characterisation suite at University of Queensland. |
Start Year | 2018 |
Description | University of Sheffield - Additive Manufacturing builds with defocussed layers |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | University of Sheffield - Additive Manufacturing builds with defocussed layers |
Collaborator Contribution | University of Sheffield - Additive Manufacturing builds with defocussed layers |
Impact | University of Sheffield - Additive Manufacturing builds with defocussed layers |
Start Year | 2022 |
Description | University of Sheffield - Nickel powder for ALM programme (Additional IN713 powder (28 kg)) |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | University of Sheffield - Nickel powder for ALM programme (Additional IN713 powder (28 kg)) |
Collaborator Contribution | University of Sheffield - Nickel powder for ALM programme (Additional IN713 powder (28 kg)) |
Impact | University of Sheffield - Nickel powder for ALM programme (Additional IN713 powder (28 kg)) |
Start Year | 2022 |
Description | University of Sheffield - Nickel powder for ALM programme (Additional IN713 powder (30 kg)) Rolls-Royce |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | University of Sheffield - Nickel powder for ALM programme (Additional IN713 powder (30 kg)) Rolls-Royce |
Collaborator Contribution | University of Sheffield - Nickel powder for ALM programme (Additional IN713 powder (30 kg)) Rolls-Royce |
Impact | University of Sheffield - Nickel powder for ALM programme (Additional IN713 powder (30 kg)) Rolls-Royce |
Start Year | 2022 |
Description | University of Sheffield - Nickel powder for ALM programme (Initial 150 kg of CM247) |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | University of Sheffield - Nickel powder for ALM programme (Initial 150 kg of CM247) |
Collaborator Contribution | University of Sheffield - Nickel powder for ALM programme (Initial 150 kg of CM247) |
Impact | University of Sheffield - Nickel powder for ALM programme (Initial 150 kg of CM247) |
Start Year | 2022 |
Description | University of Sheffield - PDRA for 2 years funded by Rolls-Royce. |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | University of Sheffield - PDRA for 2 years funded by Rolls-Royce. |
Collaborator Contribution | University of Sheffield - PDRA for 2 years funded by Rolls-Royce. |
Impact | University of Sheffield - PDRA for 2 years funded by Rolls-Royce. |
Start Year | 2023 |
Description | University of Sheffield - Phase 1 of Field Assisted Sintering Technology project (Simon Graham) |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | University of Sheffield - Phase 1 of FAST project that Simon Graham is working on - Royce reference R@S211 |
Collaborator Contribution | University of Sheffield - Phase 1 of FAST project that Simon Graham is working on - Royce reference R@S211 |
Impact | University of Sheffield - Phase 1 of FAST project that Simon Graham is working on - Royce reference R@S211 |
Start Year | 2022 |
Description | University of Sheffield - Rolls-Royce sponsored PhD student (MAPP-aligned), Matthew Gianetti. MAPP linked through Simon Graham (FAST and Gavin Baxter) |
Organisation | Rolls Royce Group Plc |
Country | United Kingdom |
Sector | Private |
PI Contribution | University of Sheffield - Rolls-Royce sponsored PhD student (MAPP-aligned), Matthew Gianetti. MAPP linked through Simon Graham (FAST and Gavin Baxter) |
Collaborator Contribution | University of Sheffield - Rolls-Royce sponsored PhD student (MAPP-aligned), Matthew Gianetti. MAPP linked through Simon Graham (FAST and Gavin Baxter) |
Impact | University of Sheffield - Rolls-Royce sponsored PhD student (MAPP-aligned), Matthew Gianetti. MAPP linked through Simon Graham (FAST and Gavin Baxter) |
Start Year | 2022 |
Description | University of Sheffield - Simon Graham collaborative research at Henry Royce Institute - sample preparation |
Organisation | European Space Agency |
Country | France |
Sector | Public |
PI Contribution | University of Sheffield - Simon Graham collaborative research at Henry Royce Institute - sample preparation |
Collaborator Contribution | University of Sheffield - Simon Graham collaborative research at Henry Royce Institute - sample preparation |
Impact | University of Sheffield - Simon Graham collaborative research at Henry Royce Institute - sample preparation |
Start Year | 2022 |
Description | University of Sheffield / Coherent Lasers |
Organisation | Coherent |
Country | United States |
Sector | Private |
PI Contribution | Unknown |
Collaborator Contribution | Unknown |
Impact | Unknown |
Start Year | 2020 |
Description | University of Sheffield / Motion Systems (Poland) |
Organisation | Motion Systems |
Country | Poland |
Sector | Private |
PI Contribution | Unknown |
Collaborator Contribution | Unknown |
Impact | Unknown |
Start Year | 2020 |
Description | University of Sheffield PHASE 2 of Field Assisted Sintering Technology project (Simon Graham) |
Organisation | UK Atomic Energy Authority |
Country | United Kingdom |
Sector | Public |
PI Contribution | University of Sheffield PHASE 2 of Field Assisted Sintering Technology project that Simon Graham is working on - Royce reference R@S211 |
Collaborator Contribution | University of Sheffield PHASE 2 of Field Assisted Sintering Technology project that Simon Graham is working on - Royce reference R@S211 |
Impact | University of Sheffield PHASE 2 of Field Assisted Sintering Technology project that Simon Graham is working on - Royce reference R@S211 |
Start Year | 2023 |
Description | University of Strathclyde (with University of Leeds) (powder) |
Organisation | University of Strathclyde |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | Providing experimental data on powder characterization (University of Leeds) |
Collaborator Contribution | modelling of laser beam interaction with spread powder layers (University of Strathclyde) |
Impact | Development of research collaboration with University of Strathclyde. |
Start Year | 2019 |
Description | University of Surrey(with University of Leeds) -characterisation of powders |
Organisation | University of Surrey |
Country | United Kingdom |
Sector | Academic/University |
PI Contribution | experimental data on powder characterization and spreading (University of Leeds) |
Collaborator Contribution | Further characterisation of powders at low stresses (University of Surrey, Colin Hare) |
Impact | Development of collaboration with University of Surrey on powder research |
Start Year | 2019 |
Description | Zeiss |
Organisation | Carl Zeiss AG |
Department | Carl Zeiss X-ray Microscopy |
Country | United States |
Sector | Private |
PI Contribution | Alloys for Additive Manufacturing Symposium - opportunity for marketing/PR by sponsorship and exhibition stand Opportunity for talk at Alloys for Additive Manufacturing Symposium. |
Collaborator Contribution | Alloys for Additive Manufacturing Symposium - Sponsorship by Zeiss for the Symposium. Representative (Mark Parsons) also gave presentation |
Impact | No impacts as yet. |
Start Year | 2018 |
Title | A METHOD AND COMPUTER PROGRAM FOR FORMING AN OBJECT |
Description | A method for forming an object, comprising: providing at least a first material having a melting point at a first temperature and a second material having a melting point at a second temperature; heating at least a portion of the first and second materials above the first and second temperatures to form a substantially molten alloy, the molten alloy having a solidifying point at a third temperature, the third temperature being less than the first temperature and the second temperature; providing substantially solid further material to at least a portion of the molten alloy, the further material having a melting point at a temperature greater than the third temperature; and heating at least a portion of the substantially solid further material above the temperature of the melting point of the further material. |
IP Reference | EP2467504 |
Protection | Patent / Patent application |
Year Protection Granted | 2012 |
Licensed | No |
Impact | Awaiting feedback |
Title | A method of manufacturing a magnetically graded material |
Description | A method of manufacturing a magnetically graded material including depositing a steel filler material to a substrate and applying a directed energy source to first and second regions of the filler material to thereby join the filler material to form a joined material. |
IP Reference | |
Protection | Patent / Patent application |
Year Protection Granted | 2019 |
Licensed | No |
Impact | A method of manufacturing a magnetically graded material |
Title | APPARATUS AND METHOD FOR PRODUCING THERMAL IMAGE DATA |
Description | A thermal imaging device is provided, comprising: a detector for receiving radiation and outputting a detector signal corresponding thereto; a steerable mirror device arranged in relation to the detector; wherein the mirror device is steerable to scan an entrance pupil over a plurality of locations such that the detector outputs respective detector signals indicative of temperatures of respective portions of the object corresponding to the said locations of the entrance pupil, and wherein the thermal imaging device is configured to provide a substantially constant etendue for all of the entrance pupil locations of the said plurality of entrance pupil locations. |
IP Reference | WO2018046939 |
Protection | Patent / Patent application |
Year Protection Granted | 2018 |
Licensed | No |
Impact | Awaiting feedback |
Title | ELECTRODE STRUCTURE AND METHOD OF MANUFACTURE THEREOF |
Description | An electrode structure comprises a conductive substrate or current collector and a first layer comprising a first electrochemically active material, the first active material being characterized by one or more first electrochemical properties. A second layer comprises a second electrochemically active material, the second active material being characterized by one or more second electrochemical properties, at least one of which is different from said one or more first electrochemical properties. The first and second layers are provided at predefined locations within the electrode structure based on the respective first and second electrochemical properties of the first and second electrochemically active materials to maximise the performance of each of the first and second layers. A method of fabricating such an electrode structure is also provided. |
IP Reference | WO2016075465 |
Protection | Patent / Patent application |
Year Protection Granted | 2016 |
Licensed | No |
Impact | Awaiting feedback |
Title | Enhanced feedstock for additive manufacturing |
Description | A method to improve the efficiency of additive manufacturing process by enchancing the infrared absorbance of feedstock materials. |
IP Reference | |
Protection | Patent application published |
Year Protection Granted | 2020 |
Licensed | No |
Impact | N/A |
Title | HYBRID DIODE AREA MELTING |
Description | A method of forming a metal component comprising at least one bulk volume and at least one surface layer. The method comprises: a) depositing a layer of metal powder onto a substrate; b) using a laser array to melt and fuse a first portion of the layer of metal powder; c) using one or more galvanometer mirror deflected lasers to melt and fuse a second portion of the layer of metal powder. The actions in b) and/or c) also fuses said first portion to said second portion. The second portion of the layer of metal powder is the portion which will comprise a surface layer of the finished component. The invention further includes an apparatus capable of performing the method of forming a metal component, a kit for upgrading an existing apparatus to perform the method of forming a metal component and a metal component formed from said method. |
IP Reference | WO2022180403 |
Protection | Patent / Patent application |
Year Protection Granted | 2022 |
Licensed | No |
Impact | A method of forming a metal component comprising at least one bulk volume and at least one surface layer. |
Title | METAL COIL FABRICATION |
Description | A method is provided for fabricating an insulated metal coil for an electrical machine. The method includes 3D printing a metal coil having a plurality of turns. The method further includes subsequently infiltrating insulating material between the turns of the metal coil to electrically insulate the turns from each other. |
IP Reference | US2019260252 |
Protection | Patent / Patent application |
Year Protection Granted | 2019 |
Licensed | Yes |
Impact | A method is provided for fabricating AM insulated metal coil for an electrical machine. The method includes 3D printing a metal coil having a plurality of turns. The method further includes subsequently infiltrating insulating material between the turns of the metal coil to electrically insulate the turns from each other. |
Title | TITANIUM ALLOY AND METHODS OF MANUFACTURE |
Description | A titanium alloy comprising Al 4.78 to 6.44 wt.%; V 3.65 to 5.15 wt.%; Mo 1.32 to 3.58 wt.%; Cr 0.75 to 2.28 wt.%; Fe 0.00 to 0.42 wt.%; C 0.00 wt.% to 0.10 wt.%; S 0.00 wt.% to 0.10 wt.%; N up to 500 ppm; O up to 2000 ppm and H up to 150 ppm; the balance being Ti and incidental elements and unavoidable impurities. Such a titanium alloy is useful for manufacturing gas turbine engine components including turbine blades and stators. |
IP Reference | EP4327964 |
Protection | Patent / Patent application |
Year Protection Granted | 2024 |
Licensed | No |
Impact | Awaiting feedback |
Title | "Beat the Machine (Learning)" Game |
Description | Game created as way of demonstrating the application and usefulness of specifically for additive manufacturing, but then can also be used to explain ML for other manufacturing processes. |
Type Of Technology | Webtool/Application |
Year Produced | 2019 |
Impact | Used at MRE and STEM for Girls events to generate interest in the subject and stimulate discussions. |
Title | Scripts for Process Control of Laser Directed Energy Deposition Manufacturing |
Description | Matlab scripts allowing for process control (both power and velocity) of laser directed energy deposition (additive manufacturing) manufacturing. Includes a Read-Me, explaining the logic behind the code, allowing for implementation on similar systems. |
Type Of Technology | Software |
Year Produced | 2022 |
Open Source License? | Yes |
URL | https://zenodo.org/record/7234172 |
Title | Scripts for thermal monitoring, EBSD Analysis and Melt Pool Modelling of L-DED |
Description | Scripts for monitoring and analysis of L-DED. Includes: Demonstration of MTEX EBSD analysis Example G-code scripts for L-DED construction Matlab scripts for melt pool modelling (Rosenthal-type calculations) Matlab scripts for coaxial melt pool monitoring and control script for keeping thermal intensity constant |
Type Of Technology | Software |
Year Produced | 2022 |
Open Source License? | Yes |
URL | https://zenodo.org/record/6760053 |
Description | "Candice Majewski blogpost 'When Science meets policy - a week in Westminster' " |
Form Of Engagement Activity | Engagement focused website, blog or social media channel |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Candice shares her thoughts on "A Week in Westminster" in a blogpost for The Science Talk |
Year(s) Of Engagement Activity | 2022 |
URL | https://thesciencetalk.com/when-science-meets-policy-a-week-in-westminster/ |
Description | 10th International Workshop on Interfaces in Santiago de Compostela Spain |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Ollie Osborn delivered a workshop on Interfaces in Santiago de Compostela Spain |
Year(s) Of Engagement Activity | 2022 |
Description | 17th European Ceramic Society Conference 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Ollie Osborn delivered a talk on, "Stereolithography of SiC" at the 17th European ceramic society conference 2022. |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.ceramicsineurope2022.org/ |
Description | 19th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing MMM 2022, 15-18 August 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | George Panoutsos's team (Taha Al-Saadi, J. Anthony Rossiter) did a presentation on Fuzzy Logic Control in Metal Additive Manufacturing: A Literature Review and Case Study, Control, Optimization and Automation in Mining, Mineral and Metal Processing |
Year(s) Of Engagement Activity | 2022 |
URL | https://ifacmmm2022.org/ |
Description | 1DRAC Meeting |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Shitong Zhou from Imperial College London presented his research at the 1 DRAC meeting. |
Year(s) Of Engagement Activity | 2020 |
Description | 2018 ASPE and Euspen Summer Topical Meeting - Dr Sam Tammas-Williams (MAPP PDRA) gave oral presentation 2 day event (start date 22/8/18) |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Correlating Volume and Surface Features in Additively Manufactured Metal Parts -2018 ASPE and euspen Summer Topical Meeting - Dr Sam Tammas-Williams attended and gave oral presentation on 'Correlating Volume and Surface Features in Additively Manufactured Metal Parts' . ASPE - American Society for Precision Engineering - Board of Directors Board of Directors was elected with members drawn from industry, private laboratories, government and academia. |
Year(s) Of Engagement Activity | 2018 |
URL | http://aspe.net/technical-meetings/2018-summer-topical-meeting/program/ |
Description | 2022 MRS Fall Meeting & Exhibit |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Max Emmanuel did a talk on "Study of the Effect of Chromium Doping on the Grain Boundary Character of WC-Co". |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.mrs.org/meetings-events/fall-meetings-exhibits/2022-mrs-fall-meeting/symposium-sessions/... |
Description | 2022 UKACC 13th International Conference on Control (CONTROL) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | M Aftab, J.A Rossiter and G Panoutsis delivered a talk on Predictive Functional Control for Difficult Dynamic Processes with a Simplified Tuning Mechanism |
Year(s) Of Engagement Activity | 2022 |
URL | https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=9781444&tag=1 |
Description | 2022 Workshop on Artificial Intelligence in Additive Manufacturing with MAPP and CAM2 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Phillip Stanley-Marbell gave a talk titled "Data-Driven Materials Design and Control - Computational Physics in AM" |
Year(s) Of Engagement Activity | 2022 |
Description | 2022 Workshop on Artificial Intelligence in Additive Manufacturing with MAPP and CAM2 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Felicity Freeman gave a talk titled "Control in Directed Energy Deposition (BeAM)" |
Year(s) Of Engagement Activity | 2022 |
Description | 2022 Workshop on Artificial Intelligence in Additive Manufacturing with MAPP and CAM2 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Rob Snell gave a talk titled "Towards Parameterless AM" |
Year(s) Of Engagement Activity | 2022 |
Description | 4th International Congress on 3D Materials Science (3DMS 2018) Prof Peter Lee 10/06/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Yue (Industrial Collaborator with Prof Peter Lee (MAPP PI)) presented 'Through-process quantification of additive manufactured industrial parts using X-ray micro-tomography' at 4th International Congress on 3D Materials Science (3DMS 2018) |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.tms.org/3dms2018 |
Description | 88 Pianists activity |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Schools |
Results and Impact | 88 Pianists is a National Outreach activity, led by Cambridge University, aimed at encouraging schoolchildren across the country to think of themselves as potential engineers and inventors, and breaking a world record at the end of it! Candice Majewski is the Sheffield member of the organising committee for this venture, and has coordinated visits with local primary schools (approximately 140 schoolchildren), and is currently leading a team of of Engineers from the University of Sheffield in the manufacturing stage of the project. |
Year(s) Of Engagement Activity | 2018,2019 |
URL | http://www.88pianists.com/ |
Description | 8th International Conference on Discrete Element Methods, Netherlands - 1 oral presentation by Yi He |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Oral presentation by Yi (PDRA, MAPP, Leeds). Raised profile of MAPP activity. |
Year(s) Of Engagement Activity | 2019 |
URL | https://mercurylab.co.uk/dem8/ |
Description | 9th UK-China Powder Technology Forum, Greenwich, London - Plenary Presentation by Ali Hassanpour |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Ali Hassanpour Plenary Talk: Particle Technology and Additive Manufacturing: current advances and future prospects |
Year(s) Of Engagement Activity | 2023 |
URL | https://constableandsmith.com/events/uk-china-PTF9-2023 |
Description | 9th UK-China Powder Technology Forum, Greenwich, London - Presentation by Mozhdeh Mehrabi |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Mozhdeh Mehrabi Talk: The effect of temperature on spreading behavior of metal powders for additive manufacturing |
Year(s) Of Engagement Activity | 2023 |
URL | https://constableandsmith.com/events/uk-china-PTF9-2023 |
Description | A Bhatt attended Code First |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | A Bhatt attended Code First girls UCL instructor with Bank of America |
Year(s) Of Engagement Activity | 2020 |
URL | https://codefirstgirls.org.uk/courses/ |
Description | A Bhatt, Royce Materials PhD Virtual Research Sandpit |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | A Bhatt attended Royce Materials PhD Virtual Research Sandpit |
Year(s) Of Engagement Activity | 2020 |
URL | https://www.royce.ac.uk/events/royce-materials-phd-virtual-research-sandpit/ |
Description | A* Institute Singapore 27.5.19 - Invited Talk Eduardo Saiz |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | "Structural Control in Additive Manufacturing of Ceramics", Eduardo Saiz gave seminar talk , 27th May 2019, A* Institute Singapore. Raised profile of MAPP. |
Year(s) Of Engagement Activity | 2019 |
Description | AAMS - Sweden - Iain Todd attended |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd (MAPP Director) attended AAMS (Alloys for Additive Manufacturing Symposium) 2019. 18-19 September 2019. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.chalmers.se/en/centres/cam2/conferences%20and%20events/conference%20AAMS2019/Pages/defau... |
Description | AAMS Conference - Madrid, Presentation by Elaine Livera |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Elaine Livera talk: "Microstructural control of LPBF Inconel 718 through post processing of intentionally placed AM discontinuity distributions" |
Year(s) Of Engagement Activity | 2023 |
URL | https://aams2023.com/ |
Description | AAMS Conference - Madrid, Presentation by Frances Livera |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Frances Livera talk: "The influence of intrinsic additively manufactured component properties on subsequent brazed joint formation," |
Year(s) Of Engagement Activity | 2023 |
URL | https://aams2023.com/ |
Description | AAMS Conference - Madrid, Presentation by Lucy Farquhar |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Lucy Farquhar talk: "Assessing additive manufacturing processability of novel refractory high entropy alloys prior to powder manufacture" |
Year(s) Of Engagement Activity | 2023 |
URL | https://aams2023.com/ |
Description | AAMS Conference - Madrid, Presentation by Oli Dew |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Oli Dew talk: "Manufacturing and producing nano-scale accurate surfaces in additive manufacturing" |
Year(s) Of Engagement Activity | 2023 |
URL | https://aams2023.com/ |
Description | AAMS Conference - Madrid, Presentation by Rob Snell |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Rob Snell Talk: Controlling additive manufacturing defects in conductive alloys |
Year(s) Of Engagement Activity | 2023 |
URL | https://aams2023.com/ |
Description | AMITIE - Berlin, Iuliia Elizarova, MAPP PDRA attended and gave presentation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Iuliia Elizarova (MAPP PDRA at Imperial College London) gave presentation at AMITIE. Attendees comprised delegates from industry and academia. |
Year(s) Of Engagement Activity | 2018 |
Description | AMITIE workshop - 12/9/18 - Imperial College London |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Workshop on ceramics 3D printing. Members of Amitie Consortium (from academia and industry) attending. Opportunity for interaction between AMITIE members and organisation of collaboration and secondments. Organised by Imperial College London, and involving MAPP PI - Prof Eduardo Saiz and MAPP PDRA - Iuliia Elizarova. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.rise-amitie.eu/news-events/ |
Description | ASTM ICAM 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | A. Leung invited Talk at ASTM ICAM 2022, "Application of in situ X-ray imaging of metal powders, powder bed fusion processes and manufactured components" |
Year(s) Of Engagement Activity | 2022 |
URL | https://amcoe.org/event/icam2022/ |
Description | ATI Event - Exhibition - Richard France at exhibition stand 18/9/18 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Dr Richard France (MAPP BDM) attended Aerospace Supply Chain Consortium Event on 18th September, with an exhibition stand. Opportunity to talk to ATI and network with other aerospace companies for potential research collaborations. Screen reader support enabled. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.ati.org.uk/resources/presentations/ |
Description | Additive Insight Podcast 24th January 2022 |
Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Innovators on Innovators: Alex Kingsbury and Candice Majewski on polymers, metals & standards in 3D printing |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.tctmagazine.com/3d-printing-resource-center/podcast/81-innovators-on-innovators-alex-kin... |
Description | Additive International - IT gave presentation at pre-summit event - 9th July. |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd gave presentation during pre-event summit (Tuesday 9th July). Raised MAPP profile. (In 2020 MAPP will be co-badging the Additive International Pre-Summit event). |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.additiveinternational.com/about-additive-international/ |
Description | Additive International - MAPP Exhibition stand |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Exhibition stand by MAPP (Richard France, Karen Wood attending). Raising profile of MAPP. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.additiveinternational.com/about-additive-international/ |
Description | Additive International - MAPP Exhibition stand - Karen Wood and Richard France attending as delegates/exhibitors - 2 days (start date 10/7/18) |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talking to industry, having MAPP stand.The Additive International summit, formerly known as the International Conference on Additive Manufacturing & 3D Printing, is a two-day event, bringing together academic and industry experts to share their knowledge and ideas. The summit attracts over 250 delegates from more than 170 institutions, with interests in all the newest technological developments for the AM industry |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.additiveinternational.com |
Description | Additive International - Prof Iain Todd - speaking on Don't blame the metals: looking at additive manufacturing from the Material Perspective. 11/7/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Iain Todd presented on Don't blame the metals: looking at additive manufacturing from the Material Perspective.'The Additive International summit, formerly known as the International Conference on Additive Manufacturing & 3D Printing, is a two-day event, bringing together academic and industry experts to share their knowledge and ideas. The summit attracts over 250 delegates from more than 170 institutions, with interests in all the newest technological developments for the AM industry |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.additiveinternational.com |
Description | Additive Manufacturing of Ceramics (2.7.19) - Iuliia Elizarova gave presentation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Iuliia Elizarova gave seminar talk "The Challenge of Multiscale Control" at the Cardiff school seminar event. Raised MAPP profile. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.cardiff.ac.uk/engineering/events/school-seminars |
Description | Additive Workshop with NARIT, Chiang Mai University and the Thai Space Consortium - Rob Snell held a seminar |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Rob Snell held a seminar at the Workshop. |
Year(s) Of Engagement Activity | 2023 |
Description | Alex C. L. Leung @ 2017 TMS Annual Meeting & Exhibition |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | TMS2017 International Conference in San Diego. Alex Lung delivered a poster entitled "Additive Manufacturing of Metals: Establishing Location-Specific, Processing-Microstructure-Property-Relationships" |
Year(s) Of Engagement Activity | 2017 |
URL | http://www.tms.org/meetings/annual-17/AM17home.aspx |
Description | Alex C. L. Leung @ Amaze Open Forum |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Alex Leung, University of Manchester, gave a presentation on "In operando study of laser-powder interaction by synchrotron X-ray imaging" |
Year(s) Of Engagement Activity | 2017 |
URL | https://www.eventbrite.co.uk/e/amaze-project-technology-forum-2017-tickets-32461611554# |
Description | Andrew Bayly @ MAPP First International Conference |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Andrew Bayly was a speaker at this event, speaking on 'Modelling particulate systems, the effect of particle shape and structure', as well as session chair. The 2018 symposium will be held in Sheffield, organised by MAPP. |
Year(s) Of Engagement Activity | 2018 |
URL | https://mapp.ac.uk/news/mapp-epsrc-future-manufacturing-hub-in-manufacture-using-advanced-powder-pr |
Description | Anna Getley talk at TMS2023 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Anna Getley talk at TMS2023, Characterising the Vapour Plume and Preferential Vaporisation of Alloy Elements during Laser Powder Bed Fusion Additive Manufacturing, California |
Year(s) Of Engagement Activity | 2023 |
Description | Appointment, A Leung, Diamond Light Source beamline I12 User Working Group |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | CLA Leung has been appointed as the Chair of the Diamond Light Source beamline I12 User Working Group. |
Year(s) Of Engagement Activity | 2020 |
Description | Appointment, A Leung, Recruitment Advisory Board (RAB) for ESRF/ILL InnovaXN MSCA Cofund Programme |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | CLA Leung has been appointed as a member of the Recruitment Advisory Board (RAB) for ESRF/ILL InnovaXN MSCA Cofund Programme. |
Year(s) Of Engagement Activity | 2020 |
Description | Arkwright Mentor, D Rees |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | Regional |
Primary Audience | Schools |
Results and Impact | D Rees became an Arkwright Mentor from April 2020 who commited a few hours per month to an A-level student. He provided the student a structural design project to develop and test a quadcopter rotor arm, gave them hands-on experience with CAD design, FEA modelling, materials selection, manufacturing, and testing. |
Year(s) Of Engagement Activity | 2020 |
Description | Attending International Solid Freeform Fabrication Symposium Austin, Texas 13/8/18 - Prof Andrew Bayly |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Andrew Bayly attended Symposium (Leeds MAPP Co-I) International Solid Freeform Fabrication Symposium (4 day conference). The conference covered various topics of Additive Manufacturing and materials science. |
Year(s) Of Engagement Activity | 2018 |
URL | http://sffsymposium.engr.utexas.edu/ |
Description | BBC Radio Wiltshire Interview |
Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Media (as a channel to the public) |
Results and Impact | Interview between University of Sheffield and BBC Radio Wiltshire on 16th November 2020. |
Year(s) Of Engagement Activity | 2020 |
Description | BEAM Customer Day, Paris - Oliver Hatt attended ( University of Sheffield) |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Oliver Hatt (PDRA, University of Sheffield) attended BEAM Customer Day, Paris 5 November 2019. |
Year(s) Of Engagement Activity | 2019 |
Description | Betatype |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Meeting with Sarat Babu, CEO at Betatype - discussed potential for collaboration and KTP application. |
Year(s) Of Engagement Activity | 2017 |
Description | Boeing - Pete Hoffman visit |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Visit from Pete Hoffman, VP of Intellectual Property, Boeing US. To review proposal and discuss potential for collaboration with MAPP. |
Year(s) Of Engagement Activity | 2017 |
Description | Boeing visit February 2017 |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | A visit from Kelly Moran (Head of Boeing Research and Technology for materials in the UK) and Fatmata Barrie (Boeing, based Oakridge National Labs), around the potential for collaboration arising from the annoucement of the Boeing site at Sheffield. This has potential to impact upon the technology offer of the University to Boeing. |
Year(s) Of Engagement Activity | 2017 |
Description | C.L.A. Leung and K. Kim were invited to give a talk at the Carpenter Additive, Widnes |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Industry/Business |
Results and Impact | 3 - 4 researchers attended to discuss and share the latest work related on the impact of powder oxidation on Additive Manufacturing, which sparked questions and discussion afterwards. |
Year(s) Of Engagement Activity | 2023 |
Description | C.L.A. Leung hosted an academic visit/knowledge exchange workshop with Dr. Wentao Yan from National University of Singapore, Singapore, Research Complex at Harwell, Harwell Campus |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Postgraduate students |
Results and Impact | Organised a knowledge exchange workshop on multiscale modelling of AM with Dr. Wentao Yan from National University of Singapore, Singapore. >20 early career researchers attended the workshop, which sparked questions and discussion afterwards in related subject areas. |
Year(s) Of Engagement Activity | 2023 |
Description | C.L.A. Leung hosted the 'IOM3 Road to Professional Membership and Chartership event' with UKRI RCaH, IOM3, and Renishaw plc. |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | I co-host the upcoming event: 'Road to professional membership and chartership' with the Research Complex at Harwell, IOM3 (Institute of Materials, Minerals & Mining), UCL, and Renishaw. If you want to find answers to any of the following questions, please come along to our in person event at Harwell campus (29th Nov 2023). We have got an excellent line-up of speakers, e.g. Ms Sarah Boad, Dr. Sarah Glanvill, and Prof. Mark Miodownik. The goal is to showcase professional practitioners to learn more about the following areas: ? Are you interested in joining a professional body or the benefits of being a member of one? ? Do you want to join the Institute of Materials, Minerals, and Mining (IOM3)? ? Do you know how being chartered could benefit your career? ? Do you know the process for becoming chartered? ? Do you even know what chartership is? |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.rc-harwell.ac.uk/events/road-professional-membership-and-chartership |
Description | CAM2 - IT attending as speaker - 3 day event (start date 21/7/18) |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Iain Todd attended CAM2 in Sweden. In the competence centre of CAM2, universities, research institutes, companies and public actors conduct research in close cooperation within the area of additive manufacturing of metal. More than 20 companies are partners in the centre, either on core or basic level, or as a small or medium sized enterprise. |
Year(s) Of Engagement Activity | 2018 |
Description | CAM2 - Iain Todd gave presentation (3 day event) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd (MAPP Director) gave presentation and also attended as CAM2 Board member. Raised profile of MAPP. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.chalmers.se/en/centres/cam2/Pages/default.aspx |
Description | CAM2/MAPP AI Workshop |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | "This joint workshop will focus on this research and the opportunities that the digitalisation of the AM process offers and the continuing research challenges that it presents. The workshop will cover the following topics: Quality Assurance and Sensors for AM - including thermal, hyperspectral, audio AI/ML and physically-based modelling for AM Ground Truth in AM processes Digital qualification of processes and materials" |
Year(s) Of Engagement Activity | 2021 |
URL | https://mapp.ac.uk/events/workshop-on-artificial-intelligence-in-additive-manufacture-joint-cam2-and... |
Description | CASC Industry Day |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | CASC organised industry day with 7 presentations from CASC researchers and industry. Imperial College London delivered talks on diverse aspects of ceramic processing and characterisation and work done with MAPP / opening of contacts with industry. |
Year(s) Of Engagement Activity | 2020 |
Description | CASC Industry Day 18/1/19 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | The Industry day will provide an opportunity to:Interact with world leading experts from academy and industry. Explore the mutual benefits of being a CASC industrial consortium member. Assist to technical presentations from academy and industry |
Year(s) Of Engagement Activity | 2019 |
URL | http://www.imperial.ac.uk/structural-ceramics/meetings/ |
Description | CASC Seminar |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Undergraduate students |
Results and Impact | Shitong Zhou from Imperial College London presented her work to researchers working on ceramics in the Centre for Advanced Structural Ceramics. |
Year(s) Of Engagement Activity | 2020 |
URL | https://twitter.com/CASC_Imperial/status/1207622252453388288/photo/1 |
Description | CASC Seminar |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Postgraduate students |
Results and Impact | Imperial College London presented to the members of the Centre for Advanced Structural Ceramics on work to date and future plans. |
Year(s) Of Engagement Activity | 2020 |
Description | CIRP Manufacturing Research Day - Iain Todd gave presentation 10/05/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Iain Todd gave a 30 minute presentation on Manufacturing using Advanced Powder Processes. CIRP is the world leading organisation in production engineering research and is at the forefront of design, optimisation, control and management of processes, machines and systems. The Academy has restricted membership based on demonstrated excellence in research and has some 600 academic and industrial members from 50 industrialised countries. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.cirp.net/about-cirp.html |
Description | CLA Leung and PD Lee, Invited Talk at virtual seminar for academic and industry in Ireland |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | CLA Leung and PD Lee, Invited Talk at virtual seminar for academic and industry in Ireland, "Quantify melt pool and defect dynamics during additive manufacturing using physical twin coupled with X-ray imaging and digital twins", Ireland, January 2023 |
Year(s) Of Engagement Activity | 2023 |
Description | CLA Leung talk at AMRC |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | C L A Leung talk at AMRC (University of Sheffield Advanced Manufacturing Research Centre) "Progress towards intelligent manufacturing", UK |
Year(s) Of Engagement Activity | 2023 |
Description | CLA Leung talk at Centre for Artificial Intelligence and Robotics (CAIR) Hong Kong Institute of Science & Innovation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | C L A Leung talk at Centre for Artificial Intelligence and Robotics (CAIR) Hong Kong Institute of Science & Innovation (Chinese Academy of Sciences), Hong Kong |
Year(s) Of Engagement Activity | 2023 |
Description | CLA Leung talk for Additive Manufacturing Defects |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | CLA Leung invited talk at Ulster University "Quantify melt pool and defect dynamics during additive manufacturing using physical twin coupled with X-ray imaging and digital twins" , Ulster |
Year(s) Of Engagement Activity | 2023 |
Description | CLA Leung, Chair of the EPSRC Training Committee for the MAPP Future Manufacturing Hub |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | CLA Leung, Chair of the EPSRC Training Committee for the MAPP Future Manufacturing Hub -- leading 8 early career researchers to appraise and review training policy for the Hub |
Year(s) Of Engagement Activity | 2020,2021,2022 |
Description | CLA Leung, Co-organiser of the IOM3 event |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | CLA Leung, Co-organiser of the 'Road to Chartership' event with the IOM3 |
Year(s) Of Engagement Activity | 2021 |
Description | CLA Leung, Invited Talk at virtual seminar series, Wuhan University of Technology |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | CLA Leung, Invited Talk at virtual seminar series, Wuhan University of Technology, "A journey to data-driven reliable efficient additive manufacturing (DREAM)", Wuhan, China, July 2022 |
Year(s) Of Engagement Activity | 2022 |
Description | CLA Leung, News article - CLF |
Form Of Engagement Activity | A magazine, newsletter or online publication |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Supporters |
Results and Impact | News article - CLF - 'Analyzing the impact of powder quality on Complex 3D Objects made by Laser Additive Manufacturing' |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.clf.stfc.ac.uk/Pages/Analyzing-the-impact-of-powder-quality-on-Complex-3D-Objects-made-b... |
Description | CLA Leung, News article - CLF |
Form Of Engagement Activity | A magazine, newsletter or online publication |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | News article - RCaH - 'British Science Week 2021 - A conversation with Early Career Researcher Dr Chu Lun Alex Leung' |
Year(s) Of Engagement Activity | 2021 |
Description | CLA Leung, Public Engagement STEM event, June 2021 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Undergraduate students |
Results and Impact | Public Engagement STEM event: Spring into STEM, Seeing inside metal 3D printing with X-ray vision, Virtual lecture Series |
Year(s) Of Engagement Activity | 2021 |
Description | CLA, Leung, Recruitment Advisory Board (RAB) member for ESRF/ILL InnovaXN MSCA Cofund Programme |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | CLA, Leung, Recruitment Advisory Board (RAB) member for ESRF/ILL InnovaXN MSCA Cofund Programme |
Year(s) Of Engagement Activity | 2020,2021,2022 |
Description | CRC/TRR 270 Colloquium 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | AA. Leung invited Talk at CRC/TRR 270 Coloquium, "My journey to data-driven reliable efficient additive manufacturing (My DREAM)" |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.tu-darmstadt.de/sfb270/about_crc/talks_1/index.en.jsp |
Description | Candice Majewski 'Peek Behind the Paper' Article |
Form Of Engagement Activity | A magazine, newsletter or online publication |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | In this 'Peek behind the paper', we speak to Candice Majewski from the University of Sheffield (UK) about her recent editorial piece published in the Journal of 3D Printing in Medicine. In this interview, Candice outlines why choosing materials for 3D printing can be a difficult process, how we can ensure 3D-printed objects are safe for humans to utilize and more |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.3dmednet.com/peek-behind-the-paper-getting-started-with-functional-materials-for-3d-prin... |
Description | Candice Majewski - Talk at the TCT Conference, Birmingham, 26th September 2018, 'More than just a GeometryLaser Sintered Parts with Anti-Bacterial Properties |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Candice Majewski ( TUOS MAPP Co-I) gave talk at TCT Conference Birmingham on 'More than just a GeometryLaser Sintered Parts with Anti-Bacterial Properties'. TCT is a design-to-manufacturing event showcasing the latest in additive manufacturing, 3D printing, design and engineering technology. Those attending include those from academia and industry. |
Year(s) Of Engagement Activity | 2018 |
URL | https://tctshow.com/tctshow/en/page/home |
Description | Candice Majewski @ 'Big Draw' |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Public/other audiences |
Results and Impact | Candice Majewski presented a 3D printing activity at the 'Big Draw' in Walkley, a local community-based event. |
Year(s) Of Engagement Activity | 2017 |
URL | http://sheffieldcityofmakers.co.uk/calendar/big-draw-in-walkley |
Description | Candice Majewski @ MaP Distinguished Lecture Series on Additive Manufacturing |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Candice Majewksi gave a lecture on 'Pushing the Boundaries of Polymer Sintering', at this event. At this interdisciplinary colloquium different internationally renowned speakers from academia and industry give lectures about their cutting-edge research, which highlights the state-of-the-art and frontiers in the AM field. |
Year(s) Of Engagement Activity | 2017 |
Description | Candice Majewski @ Polymers, Soft Matter and Colloids CDT Summer School |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Candice Majewski gave a talk at this Summer School, presenting on polymer sintering processes. |
Year(s) Of Engagement Activity | 2017 |
URL | https://www.polymercdt.org.uk/ |
Description | Candice Majewski Royal Society pairing scheme 'Week in Westminster' paired with Paul Blomfield, shadowing his work. |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Policymakers/politicians |
Results and Impact | Along with 29 other scientists from a wide range of different research specialisms, Candice spent a few days in London learning about the ways in which scientists can engage with Government and other high-level policy-makers. Another key part of the Week in Westminster was for participants to spend time shadowing an MP or Civil Servant. Candice was paired with Sheffield MP Paul Blomfield, discussing his work as an MP, sitting in on some of his meetings, and hearing from one of his researchers about what goes on behind the scenes. |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.sheffield.ac.uk/mecheng/news/when-science-meets-policy-week-westminster |
Description | Candice Majewski featured in TCT Magazine article for IWD22 |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Discussion on What more can the additive manufacturing industry do to ensure diversity & inclusion? And why does it matter? |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.tctmagazine.com/additive-manufacturing-3d-printing-news/latest-additive-manufacturing-3d... |
Description | Candice Majewski has created a case study which has gone live on Wevolver |
Form Of Engagement Activity | Engagement focused website, blog or social media channel |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Media (as a channel to the public) |
Results and Impact | Candice Majewski has created a case study which has gone live on Wevolver |
Year(s) Of Engagement Activity | 2021 |
URL | https://www.wevolver.com/article/introducing-antibacterial-properties-into-additive-manufactured-par... |
Description | Candice Majewski is a panel member at the Global Virtual Roundtable: Manufacturing Education |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Candice Majewski is a panel member at the Global Virtual Roundtable: Manufacturing Education |
Year(s) Of Engagement Activity | 2021 |
URL | https://us02web.zoom.us/webinar/register/WN_3O4FMiexRX6WM5tmSY-Ndw |
Description | Candice Majewski speaking at "Race at the Intersection" a UCL panel Discussion |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Candice Majewski to speak at a series of UCL panel discussions to explor how certain protected characteristics have shaped speakers experiences as engineers. |
Year(s) Of Engagement Activity | 2021 |
URL | https://www.ucl.ac.uk/engineering/events/2021/may/race-intersection-gender-and-race-online-panel-dis... |
Description | Candice Majewski speaking at the Transforming Industry with Additive Manufacturing event. |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Candice Majewski speaking at the Transforming Industry with Additive Manufacturing event. |
Year(s) Of Engagement Activity | 2021 |
URL | https://www.eventbrite.co.uk/e/transforming-industry-with-additive-manufacturing-tickets-14982879094... |
Description | Candice Majewski@ Liverpool Women in Engineering society panel event |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Candice Majewski was an invited panel member at the Liverpool Women in Engineering society panel event, discussing the future of AM. |
Year(s) Of Engagement Activity | 2017 |
URL | https://mapp.ac.uk/views/liverpool-women-in-science-and-engineering-society-whats-the-future-...-3d- |
Description | Candice Majewski@ Novel RF Materials and Manufacturing Techniques for Antennas |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Candice Majewski was an invited speaker at this event, speaking on 'Challenges and Opportunities for Materials in Additive Manufacturing'. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.theiet.org/events/tpn/novel/index.cfm |
Description | Case study article |
Form Of Engagement Activity | A magazine, newsletter or online publication |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Schools |
Results and Impact | I was invited to write an article for Create Education, summarising the research from this work for their more general audience. |
Year(s) Of Engagement Activity | 2021 |
URL | https://www.wevolver.com/article/introducing-antibacterial-properties-into-additive-manufactured-par... |
Description | Caterina Iantaffi talk at TMS2023 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Caterina Iantaffi talk at TMS2023, In-situ Monitoring and Post Operando Analysis of Additively Manufacturing Lunar Regolith Simulants Parts, California |
Year(s) Of Engagement Activity | 2023 |
Description | Ceramics Additive Manufacturing, 16th May 2019, Lucideon, Stoke-On-Trent. Eduardo Saiz gave invited talk |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Eduardo Saiz (co-investigator Imperial College London) gave invited talk on Multiscale structural control in robotic assisted deposition," Raised MAPP Profile. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.lucideon.com/ceramics/insight-hub/events/additive-manufacturing-workshop |
Description | Chair Plenary Session, ICASP-5 and CSSCR-5, June 2019 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Peter D. Lee, Plenary Session Chair, 5th International Conference on Advances in Solidification Process (ICASP-5) and 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5) |
Year(s) Of Engagement Activity | 2019 |
URL | http://www.icasp5-csscr5.org/ |
Description | Conference and Exhibition of the European Ceramic Society, Lyon - Poster Presentation by Rohit Malik |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Poster presentation by Rohit Malik: Novel design of metal-ceramic joints using additive manufacturing |
Year(s) Of Engagement Activity | 2023 |
URL | http://ecers2023.org/data/onglet34/module0/modalPreview.php?langue=fr¶mProjet=7173 |
Description | Conference and Exhibition of the European Ceramic Society, Lyon - Presentation by Rohit Malik |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Rohit Malik talk: Processing and properties of robocasted alumina-based ceramic matrix composites |
Year(s) Of Engagement Activity | 2023 |
URL | http://ecers2023.org/data/onglet34/module0/modalPreview.php?langue=fr¶mProjet=7173 |
Description | Connected Everything Everything: Industrial Systems in the Digital Age Conference 2018 - Iain Todd gave presentation 26/06/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Iain Todd was a panel member at the Connected Everything Conference. The 90 minute Panel session was on' Industry perspectives on digital disruption'. Connected Everything is an EPSRC-funded research network for the Digital Manufacturing community which is addressing the question 'how do we support the future of manufacturing in the UK? 200 registered members, representing over 80 different organisations. |
Year(s) Of Engagement Activity | 2018 |
URL | https://connectedeverything.ac.uk/activities/events/conference-2018/ |
Description | Core shell printing of composites-Euromat 21-Graz Austria, 2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Disseminating the work of the group between international academic and industrial audience |
Year(s) Of Engagement Activity | 2021 |
Description | Cutting through the hype about 3D printing |
Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Undergraduate students |
Results and Impact | University of Sheffield created a Podcast and Twitter takeover for RealSciNano |
Year(s) Of Engagement Activity | 2020 |
Description | D Rees, participation of exhibition of Embassy of Japan in the UK |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | D Rees participation of exhibition - "Access + Ability in the Arts, Design & Technology" Embassy of Japan in the UK, Oct to Dec 2021. |
Year(s) Of Engagement Activity | 2021 |
Description | Danish Technical University (DTU) Workshop - Invited talk by Phil Withers |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Philip J Withers Invited talk to Additive Workshop |
Year(s) Of Engagement Activity | 2023 |
Description | Data driven approach and its application in materials science - Webinar (Leicester University) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Postgraduate students |
Results and Impact | The University of Oxford presented to a broad audience of materials and data scientists. |
Year(s) Of Engagement Activity | 2020 |
Description | David Rees talk at TMS2023 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | David Rees talk at TMS2023, Capturing Cracking during Blown Powder Additive Manufacturing Using Correlative Synchrotron X-ray and IR Imaging, California |
Year(s) Of Engagement Activity | 2023 |
Description | Design for AM - A Focus on Polymers |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Candice Majewski organised and led a one day seminar on Polymer Additive Manufacturing featuring a range of speakers from Industry and academia with over 100 attendees. |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.designforam.ac.uk/design-for-am-a-focus-on-polymers/ |
Description | Designed Materials |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Meeting with company to discuss potential collaboration and scope out project |
Year(s) Of Engagement Activity | 2017 |
Description | Develop 3D - Sheffield Universities Managing Directors Club - Richard France attending |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | MAPP stand at Develop 3D Live event. Raised MAPP profile |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.develop3d.com/features/develop3d-live-2019-show-report-sheffield-additive-manufacturing-... |
Description | Develop 3D - Sheffield Universities Managing Directors Club - Iain Todd (MAPP Director) attending |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Regional |
Primary Audience | Industry/Business |
Results and Impact | Develop 3D - organised by Sheffield Universities Managing Directors Club - Iain Todd (MAPP Director) attending. Additive Manufacturing sessions were held on the day. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.develop3d.com/features/develop3d-live-2019-show-report-sheffield-additive-manufacturing-... |
Description | Digital Catapult visit February 2017 |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Delegation from the UK's Digital Catapult Centre under the theme of Digital Manufacturing. Purpose was to help Digital Catapult staff understand the manufacturing sector and think about possible future collaborations. Visit included discussions around MAPP's research programme the impacts of digital technologies, some of the challenges being faced by industry in the sector and a tour of facilities. |
Year(s) Of Engagement Activity | 2017 |
Description | Dr Ben Thomas presented at ISCMM22 (the 13th Annual International Student Conference in Metallic Materials), in Dublin. |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | Dr Ben Thomas presented on "Data Workflows in Materials". |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.sheffield.ac.uk/metallicscdt/news/13th-annual-international-student-conference-metallic-... |
Description | Dr Candice Majewski - presentation on 'Realising the potential of powder-based manufacturing' National Engineering Summit, Milton Keynes 18/09/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Candice Majewski (TUOS MAPP Co-I)gave a talk at National Engineering Summit. Attendees included senior engineers and management from leading global and Irish construction companies, manufacturers, building owners, energy companies, technology companies, data centres etc that are instrumental in building, maintaining and improving the performance of Irelands, buildings, industrial projects , infrastructure and products. The purpose of the event was to facilitate knowledge sharing and collaboration and to connect buyers and sellers. |
Year(s) Of Engagement Activity | 2018 |
URL | http://engineeringsummit.ie/ |
Description | Dr Candice Majewski and Ben Thomas met with Lithoz |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Dr Candice Majewski (MAPP Co-I) and Ben Thomas (MAPP PDRA) met with Lithoz to discuss their range of ceramic processes and materials, and look at potential areas for collaboration. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.lithoz.com/en |
Description | Dr Candice Majewski gave a presentation at Material Characterisation Additive Manufacturing Seminar |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Candice gave a presentation on "Characterisation for Polymer Additive Manufacturing". |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.malvernpanalytical.com/en/learn/events-and-training/webinars/W220913Additive?utm_source=... |
Description | Dr Candice Majewski spoke on BBC Essex (TV) on what 3D printing is and how it works. |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | Regional |
Primary Audience | Public/other audiences |
Results and Impact | Candice was interviewed on BBC Essex (TV) who were talking about 3D printers taking over flatpack furniture. |
Year(s) Of Engagement Activity | 2022 |
Description | Dr Martin Jackson - invited speaker at PARTICULATE ENGINEERING FOR INDUSTRY 4.0 - FROM FEEDSTOCK TO END USE IOM3 Conference - 27/11/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Martin Jackson (University of Sheffield Co-Investigator) spoke at IOM event - Organised by IOM Communications on behalf of the Particulate Engineering Committee of the Institute of Materials, Minerals and Mining. Delegates from academia & industry. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.iom3.org/particulate-engineering-committee/event/particulate-engineering-industry-40-fee... |
Description | Dr Richard France - attended Cambridge IfM (Institute for Manufacturing) 2 day event 27-28 September |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Dr Richard France (MAPP Senior Business Development Manager) attended Cambridge IfM conference as delegate. Networking with other delegates to raise MAPP profile. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.ifm.eng.cam.ac.uk/aboutifm/ |
Description | Dr Richard France - attended Rolls Royce UTP Meeting 25/10/18 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Dr Richard France (MAPP SBDM) attended Rolls Royce UTP meeting (University Technology Partnership) at Derby. Academia and industry represented at the meeting. |
Year(s) Of Engagement Activity | 2018 |
Description | Dr Richard France - attended TCT Conference 26/9/18 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Richard France (MAPP SBDM) attended TCT conference as delegate. Networking with other delegates to raise MAPP profile. |
Year(s) Of Engagement Activity | 2018 |
URL | https://tctshow.com/tctshow/en/page/home |
Description | Dr Rob Snell spoke at SPIE Astronomical Telescopes + Instrumentation 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | He gave a talk on "Towards understanding and eliminating defects in additively manufactured CubeSat mirrors". |
Year(s) Of Engagement Activity | 2022 |
URL | https://spie.org/astronomical-telescopes-instrumentation/presentation/Towards-understanding-and-elim... |
Description | Dr Simon Graham and Dr Oliver Levano Blanch presented at the 10th anniversary of FAST/SPS expert group in May 2022 in Germany. |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Dr Oliver Levano Blanch reported about the processing of a low cost titanium feedstock via FAST/SPS" |
Year(s) Of Engagement Activity | 2022 |
URL | https://dgm.de/en/article?tx_news_pi1%5Baction%5D=detail&tx_news_pi1%5Bcontroller%5D=News&tx_news_pi... |
Description | Dr Simon Graham and Dr Oliver Levano Blanch presented at the 10th anniversary of FAST/SPS expert group in May 2022 in Germany. |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Simon Graham presented how FAST/SPS can be effectively used to process aluminium powders that are out of size specifications for usage in additive manufacturing. |
Year(s) Of Engagement Activity | 2022 |
URL | https://dgm.de/en/article?tx_news_pi1%5Baction%5D=detail&tx_news_pi1%5Bcontroller%5D=News&tx_news_pi... |
Description | Dr Simon Graham and Dr Oliver Levano Blanch presented at the 10th anniversary of FAST/SPS expert group in May 2022 in Germany. |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Dr Oliver Levano Blanch shared results on the influence of current induced thermal profiles in titanium during FAST/SPS processing. |
Year(s) Of Engagement Activity | 2022 |
URL | https://dgm.de/en/article?tx_news_pi1%5Baction%5D=detail&tx_news_pi1%5Bcontroller%5D=News&tx_news_pi... |
Description | Dress to Impress - Interviews at Forge Valley School - Prof Iain Todd - 21/06/18 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Schools |
Results and Impact | Prof Iain Todd was involved in giving 'mock'interviews at Forge Valley School, to give pupils experience of interviews to improve their employability opportunities. |
Year(s) Of Engagement Activity | 2018 |
Description | Droplets 2023, Beijing, China - Presentation by Andrew Bayly |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Andrew Bayly talk: Powders and droplets particles collision |
Year(s) Of Engagement Activity | 2023 |
URL | https://droplets2023.buaa.edu.cn/#/home |
Description | EBAM(2nd International Conference on Electron Beam Additive Manufacturing) - given by Dr Sam Tammas Williams, MAPP PDRA - 3 day event (start date 11/4/18) |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Sam Tammas-Williams was keynote speaker (30 mins) at EBAM. The scientific focus for EBAM 2018 was extended by recent research issues regarding new electron beam additive manufacturing technologies and processing of material composites. Organised by EAM(Engineering of Advanced Materials) with industry partners including projects with BASF, Süd-Chemie, Bayer Technologies, BMW, and Merck Keynote on' Understanding and exploiting variability in electron beam melted components' |
Year(s) Of Engagement Activity | 2018 |
URL | https://eam.fau.de/ebam2018/ |
Description | ECerS 16-20 June 2019, Torino, Italy - Iuliia Elizarova gave presentation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Iullia Elizarova (MAPP PDRA Imperial College London) gave talk on "Robocasting of Foldable Ceramics". Raised MAPP profile. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.ecers2019.org/ |
Description | ECerS 16-20 June 2019, Torino, Italy - Eduardo Saiz (Imperial) - invited talk |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Additive Manufacturing and Structural Control of Ceramics" Eduardo Saiz (MAPP Co-Investigator, Imperial Sheffield) , Invited talk ECerS 16-20 June 2019, Torino, Italy |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.ecers2019.org/ |
Description | EDEM - DEM Powder Calibration Meeting - Dr Ben Thomas (MAPP PDRA) provided talk 21/6/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Ben Thomas (University of Sheffield MAPP PDRA) attended to give talk at EDEM Dem Powder Calibration Meeting - involved representatives from leading pharmaceutical companies, researchers from universities as well as powder testing equipment providers Freeman Technology and Granutools. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.edemsimulation.com/news/new-dem-powder-calibration-initiative-to-improve-simulation-of-p... |
Description | ESRF Invited Talk - Prof Peter Lee (31/05/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Invited Talk - Peter Lee (MAPP PI) on 'FAST IN SITU SYNCHROTRON IMAGING OF LASER ADDITIVE MANUFACTURING' hosted by ESRF on 31/5/18. Prof Peter Lee (UCL MAPP PI)giving talk at ESRF (The European Synchrotron Radiation Facility) Seminar. ESRF is an international organisation with the cooperation of 22 partner nations, of which 13 are Members and 9 are Associates. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.esrf.eu/home/events/Seminars/area-events/esrf-seminars-list/fast-in-situ-synchrotron-imag... |
Description | Eduardo Saiz @ Frontiers of Ceramics and Materials, Cologne |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Eduardo Saiz was an invited speaker and spoke on 'Building hierarchical structures with ceramics'. |
Year(s) Of Engagement Activity | 2017 |
Description | Embedded Printing of Ceramic Composites-45th International Conference & Exposition on Advanced Ceramics & Composites 2021(ICACC 2021) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Disseminating the work of the group between international academic and industrial audience |
Year(s) Of Engagement Activity | 2021 |
Description | Energy Cluster Opening reception |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Prof Peter Lee (MAPP PI) Participated in Energy Cluster Opening reception (implementing policy) |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.harwellcampus.com/news/harwell-energytec-cluster-launches-today-faraday-institution-anno... |
Description | Engineering Designer Interview |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | The University of Sheffield interviewed Will Dalrymple regarding medical applications of AM. |
Year(s) Of Engagement Activity | 2020 |
URL | http://journal-download.co.uk/digitalmagazines/edr/EDR01JUL2020FULLEDR.pdf |
Description | Engineering Integrity Society - IT gave talk |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Iain Todd (MAPP Director) gave presentation at Engineering Integrity Society 'Structural Integrity in Additive Manufacturing' on 18.6.19. The Engineering Integrity Society is a long established charitable society focusing on the areas of fatigue, testing and durability. Raised profile of MAPP activity. |
Year(s) Of Engagement Activity | 2019 |
URL | http://e-i-s.org.uk/ |
Description | Exhibition at International Conference on Additive Manufacturing and 3D Printing |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | MAPP exhibited at the International Conference on Additive Manufacturing and 3D Printing in Nottingham, 10th-12th July 2017. |
Year(s) Of Engagement Activity | 2017 |
URL | https://www.am-conference.com/ |
Description | Exploring STEM Event at Sheffield University |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Schools |
Results and Impact | MAPP stand at Exploring STEM Event at Sheffield University. 280 pupils from 10 local schools attended the event. |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/exploring-stem-4th-may-2023 |
Description | Exploring STEM Event, Sheffield University Octagon Centre - 27th February 2024 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Schools |
Results and Impact | MAPP Project Researchers had a stand at this event with 3D pens, powder matching game and 3D printer. |
Year(s) Of Engagement Activity | 2024 |
URL | https://www.sheffield.ac.uk/engineering/news/event-inspires-next-generation-engineers |
Description | FEMS EUROMAT 2023, Frankfurt, Germany - Plenary talk by Phil Withers |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Philip J Withers Plenary Talk: Seeing is believing: Correlative time resolved electron and x-ray imaging of materials behaviour |
Year(s) Of Engagement Activity | 2023 |
URL | https://euromat2023.fems.eu/ |
Description | FMLWebinar Series #3 - Sultan Ageng Tirtayasa Tirtayasa University (Untirta), Indonesia |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Undergraduate students |
Results and Impact | University of Oxford presented research to an audience from a metallurgy department including students, researchers and academics. Audience was mainly from Indonesia, with a limited number of attendees from Europe. |
Year(s) Of Engagement Activity | 2020 |
Description | Festival of the Mind - Sheffield 20-30 September 2018 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Public/other audiences |
Results and Impact | Candice Majewski/Kamran Mumtaz (TUOS MAPP Co-I's) featured in Sheffield wide public engagement event Festival of the Mind within iconic portraits of engineers. |
Year(s) Of Engagement Activity | 2018 |
URL | http://festivalofthemind.group.shef.ac.uk/iconic-portraits-of-mechanical-engineering/ |
Description | Future Materials at Cardiff University |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Iuliia Elizarova (PDRA - Imperial College London) invited to give talk on CASC progress and collaborations |
Year(s) Of Engagement Activity | 2019 |
Description | Girls in STEM Event |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Regional |
Primary Audience | Schools |
Results and Impact | MAPP stand with activities to engage/inform Y9-Y11 girls about STEM careers. 7 schools and 168 Girls attended. |
Year(s) Of Engagement Activity | 2022 |
Description | Goodfellows visit to MAPP |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Goodfellow (supplier of materials for research) visited MAPP at the University of Sheffield on 16.7.19. Karen Wood (MAPP Project Manager) hosted. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.goodfellow.com/ |
Description | Grain boundary character distribution of WC-Co compared with measure WC grain boundary fracture energy-European Congress and Exhibition on Advanced Materials and Processes POSTER (EUROMAT 2021) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Disseminating the work of the group between international academic and industrial audience |
Year(s) Of Engagement Activity | 2021 |
Description | Granular Flow SIG meeting - Dr Yi He gave presentation 21/6/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Yi He (MAPP PDRA) gave a talk on recent advances in modelling capabilities of multiphase flows to Granular Flow SIG meeting. |
Year(s) Of Engagement Activity | 2018 |
URL | https://fluids.ac.uk/ |
Description | Granular Flow SIG meeting - Prof Andrew Bayly gave oral presentation 21/6/18 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Andrew Bayly (MAPP PI) gave presentation on "The effect of particle shape and adhesion on granular segregation" at Granular Flow SIG meeting |
Year(s) Of Engagement Activity | 2018 |
URL | https://fluids.ac.uk/ |
Description | Greenwich University - CHAMP workshop |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Meeting with University of Greenwich, Leeds, MTC and AMRC to discuss potential conortium on powder testing for AM |
Year(s) Of Engagement Activity | 2019 |
Description | H Chapman poster talk at MAPP 2nd international conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | H Chapman poster talk at MAPP conference, "Synchrotron X-ray Imaging of Directed Energy Deposition (DED) Additive Manufacturing of Nickel Alloy IN718Plus", UK |
Year(s) Of Engagement Activity | 2023 |
Description | HEA 2023, Pittsburgh, USA - Presentation by Lucy Farquhar |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Lucy Farquhar talk: Assessing Additive Manufacturing Processability of Novel Refractory High Entropy Alloys Prior to Powder Manufacture: |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.tms.org/portal/portal/Meetings___Events/2023/HEA2023/default.aspx |
Description | HEA 2023, Pittsburgh, USA - Presentation by Lucy Farquhar |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Lucy Farquhar talk: Development and Characterisation of a New TiVNbMo-based Refractory High Entropy Alloy for High Temperature Applications |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.tms.org/portal/portal/Meetings___Events/2023/HEA2023/default.aspx |
Description | Hosted Visit from Sir David McMurtry |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | UCL Hosted visit of Sir David McMurtry, founder of Renishaw PLC. Including presentations and demonstrations of research |
Year(s) Of Engagement Activity | 2023 |
Description | ICAA11 Conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | University of Oxford presentation at the International Conference on Aluminium Alloys 2020. |
Year(s) Of Engagement Activity | 2020 |
Description | ICNSC 2023, Marseilles, France - Presentation by Emad Grais |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Emad Talk: Reinforcement Learning for Multiple-Input Multiple-Output Control in Metal Additive Manufacturing |
Year(s) Of Engagement Activity | 2023 |
URL | https://icnsc2023.lis-lab.fr/ |
Description | IFAC European Control Conference, ECC 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | G Panoutsos's team (Aftab, A J Rossiter) did a presentation on Exploiting Laguerre Polynomials and Steady-State Estimates to Facilitate Tuning of PFC |
Year(s) Of Engagement Activity | 2022 |
Description | IFAC European Control Conference, ECC 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | G Panoutsos's team (Aftab, A J Rossiter) did a presentation on A Novel Approach to PFC for Nonlinear Systems |
Year(s) Of Engagement Activity | 2022 |
Description | IFAC World Congress, Yokahama, Japan - Presentation by George Panoutsos |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | George Panoutsos talk: Stability in Reinforcement Learning Process Control for Additive Manufacturing |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.ifac2023.org/ |
Description | IFAC World Congress, Yokahama, Japan - Presentation by T.M. Al-Saadi |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | T.M. Al-Saadi, A.J. Rossiter, George Panoutsos talk: In-situ process control strategies for selective laser melting |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.ifac2023.org/ |
Description | IFPRI - Poster Presentation by Mozdeh Mehrabi (University of Leeds) 25/6/18 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Poster presentation by Mozdeh Mehrabi (MAPP PhD student at University of Leeds) at IFPRI - International Fine Particle Research Institute on 25/6/18 |
Year(s) Of Engagement Activity | 2018 |
Description | ILL/ESS user meeting in Grenoble - Michael Preuss (Manchester University) |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | ILL/ESS user meeting in Grenoble -Michael Preuss (Co-Investigator MAPP Manchester University) was invited speaker |
Year(s) Of Engagement Activity | 2019 |
URL | https://europeanspallationsource.se/event/2018/10/10/ill-and-ess-european-users-meeting |
Description | ISCF Made Smarter Workshop 1.5.19 - Richard France attending |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Richard France (MAPP Senior Business Development Manager) participated in ISCF Made Smarter workshop - scoping ISCF activities and future calls |
Year(s) Of Engagement Activity | 2019 |
Description | IWAC - International Workshop on Advanced Ceramics, Limoges, France - Presentation by Rohit Malik |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Rohit Malik talk: Processing and properties of direct light processed alumina-based ceramic matrix composites |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.unilim.fr/iwac-registration/program/ |
Description | Iain Todd @ AAMS2017 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Iain Todd was an invited speaker at this event, as well as session chair. The 2018 symposium will be held in Sheffield, organised by MAPP. |
Year(s) Of Engagement Activity | 2017 |
URL | https://www.mpie.de/aams2017 |
Description | Iain Todd @ AM3PS 2017 - Additive Manufactured Metallic Materials Properties & Structures |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Iain Todd gave a keynote address Manufacture using Advanced Powder Processes : Performance by Design in AM. |
Year(s) Of Engagement Activity | 2017 |
URL | https://www.iom3online.org/iom/frontend/reg/thome.csp?pageID=365709&eventID=732&traceRedir=2&eventID... |
Description | Iain Todd @ EPSRC Website |
Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Media (as a channel to the public) |
Results and Impact | Interview with Professor Iain Todd - Director, Future Manufacturing Hub in Manufacture using Advanced Powders and Processes (MAPP), covering industry trends in powder based manufacturing. |
Year(s) Of Engagement Activity | 2017 |
URL | https://www.epsrc.ac.uk/newsevents/multimedia/professoriaintodd/ |
Description | Iain Todd @ Expert Workshop on Future Trends in Manufacturing and their Implications for Energy Usage: The Case for Additive Manufacturing |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Iain Todd attended an expert workshop looking at additive manufacturing and energy usage, as part of the Academy of Engineering's partnership with BP. |
Year(s) Of Engagement Activity | 2017 |
Description | Iain Todd @ ILAS 2017: The 5th Industrial Laser Applications Symposium |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | "Iain Todd presented on 'Manipulating microstructure through process control in laserbased Additive Manufacturing'" |
Year(s) Of Engagement Activity | 2017 |
URL | http://ilas2017.co.uk/ |
Description | Iain Todd @ Manufacturing Review Website |
Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Media (as a channel to the public) |
Results and Impact | UK Manufacturing Review is an annual review of manufacturing, engineering and technology sectors, written by experts and produced by Stirling Media. Short interview with Professor Iain Todd - Director of MAPP about industry trends in powder based manufacturing. Part of the UK Manufacturing Review's video wall - pieces from thought leaders across industry, academia, government and catapult centres. |
Year(s) Of Engagement Activity | 2016 |
URL | http://www.ukmanufacturingreview.com/2016/video-wall/ |
Description | Iain Todd @ Quality Control for Additive Manufacturing |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | European Society for Precision Engineering and Nanotechnology (euspen). Special Interest Group Meeting: Quality Control for Additive Manufacturing. Iain Todd delivered a lecture titled "In-situ monitoring and machine learning" - an overview of MAPP and our research on process monitoring, machine learning and control. |
Year(s) Of Engagement Activity | 2017 |
URL | http://www.euspen.eu/our-events/programme-quality-control-for-additive-manufacturing/ |
Description | Iain Todd @ RCaH Seminar |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Iain Todd was invited to take part in the RCaH seminar series, and spoke on "Metallurgical Challenges in Additive Manufacturing" |
Year(s) Of Engagement Activity | 2018 |
Description | Iain Todd @ Titanium Information Group |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | 1 hour presentation/lecture introducing MAPP and discussing additive manufacturing of titanium. TIG is part of the Materials, Minerals and Mining group, hosted at different sites on a quarterly basis. The audience was a mix of academics working with titanium, PhD students and practioners in the field. Two presentations were given in addition to Iain Todd's: one by GKN Aerospace, and one from AMRC discussing additive manufacturing in titainum. The event generated follow-up conversations with representatives from VSMPO (the host institution) and Leco. |
Year(s) Of Engagement Activity | 2017 |
URL | https://www.iom3online.org/iom/frontend/reg/thome.csp?pageID=356280&eventID=712&traceRedir=2&eventID... |
Description | Iain Todd @ Workshop on machine learning and data analytics in advanced metals processing |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Iain Todd particpated in this workshop, aimed at bringing together experts in computational materials design, machine learning and high-performance computing with those in metallurgy and materials characterisation to consider the particular challenges in exploiting modern computational methods in designing new metallic materials and to explore opportunities and exchange ideas for major collaborative projects. |
Year(s) Of Engagement Activity | 2017 |
URL | https://sites.google.com/view/machinelearningandmetals/home |
Description | Iain Todd talk to Professional Engineers South Cumbria |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | IT talk to Professional Engineers South Cumbria, 30th September 2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Imogen Cowley talk at TMS2023 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Imogen Cowley talk at TMS2023, Mapping Directed Energy Deposition of Nickel Superalloys Through In-situ Synchrotron Radiography, California |
Year(s) Of Engagement Activity | 2023 |
Description | Imperial Ceramic Summer School, 16-18 September 2018 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | The Summer School aims to offer information on current developments in manufacturing and properties of ceramics with content delivered through a mixture of tutorials, laboratory sessions and master classes given by experts in the field. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www3.imperial.ac.uk/newsandeventspggrp/imperialcollege/engineering/materials/eventssummary/ev... |
Description | Indian delegation March 2017 |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Organised by UKTI under the theme Design for Manufacturing. Delegation from Indian Institute of Science (Design and Prototyping Centre) and the Central Manufacturing Technology Institute (equivalent to the UK's Catapult Centre). Tour of facilities, presentations on research programmes and discussions with a view to seeding new collaborations. |
Year(s) Of Engagement Activity | 2017 |
Description | Integrated Metrology for Additive Manufacturing |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd (MAPP Director) gave talk to Integrated Metrology for Additive Manufacturing conference in Nottingham on 17.7.19 on Machine learning for control of process outcomes in AM' . Raised profile of MAPP. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.nottingham.ac.uk/conference/fac-eng/metmap-2019/ |
Description | International Conference on Advanced Manufacturing 2023, Washington DC - Invited presentation by Ryan Brown |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Ryan Brown invited talk: Towards Quantum Cascade Laser Sintering of Polymer Parts - Extension of Diode Area Melting to the Mid-IR |
Year(s) Of Engagement Activity | 2023 |
URL | https://amcoe.org/event/icam2023/ |
Description | International Conference on Control, Decision and Information Technologies - CoDIT |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Atakan Sahin and George Panoutsis delivered a talk on Self-tuning multi-model statistical process control for process monitoring in additive manufacturing |
Year(s) Of Engagement Activity | 2022 |
URL | https://codit2022.com/Final_Program_CoDIT_2022.pdf |
Description | International Conference on Materials for Humanity 2022 at the National University of Singapore |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Ming Li delivered a talk on "Robust Underwater Oil-repellent Biomimetic Ceramic Surfaces: Combining the Stability and Reproducibility of Functional Structures" at the International Conference on Materials for Humanity 2022 at the National University of Singapore. |
Year(s) Of Engagement Activity | 2022 |
URL | https://mrs.org.sg/event/mh22/ |
Description | International Fine Particle Research Institute (IFPRI) Edinburgh - Prof Iain Todd gave presentation 27/06/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Iain Todd was invited to give a 40 minute presentation on Additive Manufacturing to IFPRI.IFPRI (International Fine Particle Research Institute) is an industry driven consortium of large companies (Merck, DuPont, Unilever, Johnson Matthey, Syngenta) with an interest in particle technology. Each year the membership meets to review IFPRI funded programs, determine new programs in particle technology, and hear invited speakers in new areas that may be of interest to the membership. |
Year(s) Of Engagement Activity | 2018 |
URL | https://ifpri.net/mission-statement |
Description | International Solid Freeform Fabrication Symposium, Austin, Texas on Manufacture using advanced powder processes' 4 day event 13-16 August 2018 - Dr Candice Majewski speaking |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Candice Majewski (MAPP Co-I TUOS) speaking on Manufacture using advanced powder processes' at International Solid Freeform Fabrication Symposium, Austin, Texas on Manufacture using advanced powder processes' 4 day event 13-16 August 2018 |
Year(s) Of Engagement Activity | 2018 |
URL | http://sffsymposium.engr.utexas.edu/ |
Description | Interview CLA Leung, Final Broadening your Horizons Talk |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Interview CLA Leung, 'Seeing inside the additive manufacturing process with X-ray vision', Final Broadening your Horizons Talk for Term 2, UCL MechEng. |
Year(s) Of Engagement Activity | 2021 |
Description | Interview with Primary Engineer |
Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Schools |
Results and Impact | A. Leung interviewed by the Primary Engineer Programme, 'If you were an ENGINEER, what would you do?" |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.primaryengineer.com |
Description | Interview, P D Lee, by CGTN Europe for RAZOR programme. |
Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Media (as a channel to the public) |
Results and Impact | P D Lee was interviewed by S Somara from CGTN Europe for RAZOR TV prgogramme, topics include 3D printing for aerospace industry and volcano programme. |
Year(s) Of Engagement Activity | 2020 |
Description | Invited Talk - European Space Agency Workshop, Workshop on additive manufacturing in space, Dr A Leung (UCL) (09/07/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Regional |
Primary Audience | Professional Practitioners |
Results and Impact | Invited Talk - European Space Agency Workshop - Leung, C. L. A. (MAPP PDRA UCL), Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J.(MAPP Co-I Manchester), & Lee, P. D (MAPP PI UCL). (2018), 'Revealing defect dynamics in laser additive manufacturing by multimodal imaging', Workshop on additive manufacturing in space, European Space Agency - Rutherford Appleton laboratory: advanced manufacturing laboratory, Harwell, 9th July 2018 |
Year(s) Of Engagement Activity | 2018 |
Description | Invited Talk, 2018 TMS Annual Meeting - Prof Peter Lee (11/03/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Invited Talk, Prof Peter Lee (MAPP PI), on 'Fast synchotron x-ray imaging of the mechanisms controlling laser additive manufacturing ' at TMS (The Minerals, Metals and Materials Society) Annual Meeting on 11th March 2018. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.tms.org/tms2018 |
Description | Invited Talk, APICAM2019 Asia-Pacific International Conference on Additive Manufacturing, June 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Yunhui Chen invited to give a talk at the APICAM2019 Asia-Pacific International Conference on Additive Manufacturing, June 2019, on "In situ and Operando X-ray Imaging of Molten Pool Dynamics and Defect Formation Mechanism in Direct Energy Deposition Additive Manufacturing" |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.apicam2019.com.au/ |
Description | Invited Talk, Additive Manufacturing advanced technologies for accelerator application 2019, April 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Chu Lun Alex Leung invited to give a talk at the Additive Manufacturing advanced technologies for accelerator application 2019, April 2019, on "AM and beamlines applications" |
Year(s) Of Engagement Activity | 2019 |
URL | https://indico.cern.ch/event/775278/contributions/3228100/ |
Description | Invited Talk, CLA Leung, Artificial Intelligence in Additive Manufacture workshop |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Invited Talk, CLA Leung, Artificial Intelligence in Additive Manufacture workshop organised by MAPP/CAM, 'In situ multi-modal imaging of additive manufacturing' |
Year(s) Of Engagement Activity | 2021 |
Description | Invited Talk, CLA Leung, Artificial Intelligence in Additive Manufacture workshop |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Invited Talk, CLA Leung, Artificial Intelligence in Additive Manufacture workshop |
Year(s) Of Engagement Activity | 2021 |
Description | Invited Talk, CLA Leung, CDT-DIS seminar, UCL |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Invited Talk, CLA Leung, CDT-DIS seminar, University College London, 'A journey to data-driven reliable efficient additive manufacturing (DREAM)' |
Year(s) Of Engagement Activity | 2021 |
Description | Invited Talk, CLA Leung, Engineering Alloy Seminar |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Invited Talk, CLA Leung, Engineering Alloy Seminar, 'A journey to data-driven reliable efficient additive manufacturing (DREAM)' |
Year(s) Of Engagement Activity | 2021 |
Description | Invited Talk, CLA Leung, Image-Based Simulation for Industry 2021, Institute of Physics |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Invited Talk, CLA Leung, Image-Based Simulation for Industry 2021, Institute of Physics, London, UK, 'Seeing inside powder bed fusion with X-ray imaging and image-based modelling' |
Year(s) Of Engagement Activity | 2021 |
Description | Invited Talk, DIAM Additive Manufacturing Workshop 2019, Sept 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Chu Lun Alex Leung invited to give a talk at the DIAM Additive Manufacturing Workshop 2019, Sept 2019 on "Unravelling defect evolution mechanisms during laser additive manufacturing using multi-modal imaging" |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.youtube.com/watch?v=L6ocd2TxP38&list=PLBPO0Ndq3b-HZzvF7oSaLE2Gp2xl2J_Uv&index=4&t=18350s |
Description | Invited Talk, Diamond II - Benefits & opportunities of the Diamond upgrade for Bio-Cryo Imaging and Imaging & Microscopy - Prof Peter Lee UCL (18/09/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Invited Talk, Prof Peter Lee (MAPP PI UCL), 'Capturing ultra-fast phenomena during the processing of advanced materials' The aims of this workshop was to introduce Diamond-II, to discuss its potential benefits for the existing facilities, and to develop the science case for the machine upgrade. Attendees from academia, and industry. The aims of this workshop was to introduce Diamond-II, to discuss its potential benefits for the existing facilities, and to develop the science case for the machine upgrade. Attendees from academia, and industry. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.diamond.ac.uk/Home/Events/2018/DiamondIIBioIma.html |
Description | Invited Talk, P.D. Lee, TMS 2022 Annual Meeting, |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk, P.D. Lee, TMS 2022 Annual Meeting, Utilising high-speed synchrotron X-ray imaging to understand the response of AM alloys under realistic processing conditions |
Year(s) Of Engagement Activity | 2021 |
Description | Invited Talk, Symposium Honouring Prof. John Campbell's 80th Birthday, March 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Peter Lee invited to give a dinner talk at the Symposium Honouring Prof. John Campbell's 80th Birthday |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.tms.org/tms2019 |
Description | Invited Talk, TMS 2019 Annual Meeting, March 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Profesor Peter D. Lee invited to give a talk at the TMS 2019 Annual Meeting, San Antonio, Texas, USA, 10th-14th March, 2019 on 'Capturing microstructure and defect formation during laser additive manufacturing using synchrotron imaging" |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.tms.org/tms2019 |
Description | Invited Talk, TMS 2020 Annual Meeting & Exhibition, Feb 2020 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Chu Lun Alex Leung invited to give a talk at the TMS 2020 Annual Meeting & Exhibition, February 2020, on "Resolving pore evolution mechanisms during laser powder bed fusion additive manufacturing by multi-modal imaging" |
Year(s) Of Engagement Activity | 2020 |
URL | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/F674E89D45757EBF8525842A002C98E9?OpenDocume... |
Description | Invited Talk, Ultrafast X-ray Studies on Dynamic Irrepressible Process - Prof Peter Lee (25/04/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Invited talk, Prof Peter Lee (MAPP PI) , presented on 'Capturing ultra-fast phenomena during materials processing'. Beijing, Workshop on Ultra-fast dynamic processes. |
Year(s) Of Engagement Activity | 2018 |
Description | Invited talk CLA Leung at 2021 Virtual Denver X-ray Conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Invited talk/session chair: Leung, C.L.A, 'Probing the heart of laser powder bed fusion using X-ray', 2021 Virtual Denver X-ray Conference, 2-6 August 2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Invited talk CLA Leung at 2nd Annual Advanced Smart Materials Online Conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Invited talk: Leung, C.L.A, Elizarova, I, Isaacs, M, Marathe, S, Saiz, E, Lee, P. D., 'Next Generation Manufacturing Technologies for Smart Materials', 2nd Annual Advanced Smart Materials Online Conference, 6th of October 2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Invited talk CLA Leung at 3rd International Metallurgical Processes Workshop for Young Scholars |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Invited talk: Leung, C. L. A., Marussi, S., Sinclair, L., Huang, Yuze, Clark, S. J., Olbinado, M. P., Boller, E, Rack, A., Lee, P. D, 'Probing laser powder bed fusion additive manufacturing using x-ray imaging and process replicators' 3rd International Metallurgical Processes Workshop for Young Scholars, July 26-28, 2021. |
Year(s) Of Engagement Activity | 2021 |
Description | Invited talk CLA Leung at Baker Hughes Additive Manufacturing Symposium 2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | Invited talk: Leung C.L.A., Lee, P.D., Huang, Y, Clark, S. J., Marussi, S., Sinclair, L, Atwood, R.C., Bodey, A., Marathe, S., Fezzaa, K., Rack, A. 'Seeing inside the additive manufacturing process with X-ray vision', Baker Hughes Additive Manufacturing Symposium 2021, 30th Augsut - 10th Sep 2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Invited talk, 2018 Workshop on Advances in X-ray Imaging, Diamond Light Source -Dr Alex Leung UCL (15/06/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Dr Alex Leung (UCL MAPP PDRA) spoke at Diamond workshop- Advances in X-ray Imaging: Expanding the Frontiers of Knowledge, on 'Revealing defect dynamics in laser additive manufacturing by in situ and operando X-ray imaging' 15/06/18 |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.diamond.ac.uk/Home/Events/2018/Advances-in-X-ray-Imaging0.html |
Description | Invited talk, CLA Leung, ESRF User Meeting |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Invited talk, CLA Leung, "Seeing inside laser additive manufacturing processes using physical twins and fast-speed X-ray imaging", ESRF User Meeting |
Year(s) Of Engagement Activity | 2021 |
Description | Invited talk, Methods for Characterizing Defects in Advanced Manufacturing Processes Workshop at Cornell University New York, Oct 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Peter D. Lee invited to give a talk at the Methods for Characterizing Defects in Advanced Manufacturing Processes Workshop at Cornell University New York, Oct 2019, on "Industrial problems with defects solved through in situ characterization methods" |
Year(s) Of Engagement Activity | 2019 |
URL | https://indico.classe.cornell.edu/event/315/overview |
Description | Invited talk, PD Lee, History of X-ray Imaging of Materials |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee gave an invited talk entittled "History of X-ray Imaging of Materials" at the in situ X-ray imaging: applications from aerospace to biotechnology workshop |
Year(s) Of Engagement Activity | 2021 |
Description | Invited talk, PD Lee, Imaging of Additive Manufacturing |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee gave an invited talk entittled "Imaging of Additive Manufacturing " at the in situ X-ray imaging: applications from aerospace to biotechnology workshop |
Year(s) Of Engagement Activity | 2021 |
Description | Invited talk, PD Lee, at International Symposium on the Science and Processing of Cast Iron conference in Japan |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee, Invited to talk on the paper written with N. S. Tiedje, C. L. Xu1, T. Andriollo, T. Wigger M. Azeem, J. H. Hattel and P. D. Lee: An in-situ study of formation of compact graphite during solidification of cast iron using X-ray tomography and radiography` |
Year(s) Of Engagement Activity | 2021 |
Description | Invited talk, PD Lee/RT, Bio applications - Covid case study |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee gave an invited talk entitled "Bio applications - Covid case study" at the in situ X-ray imaging: applications from aerospace to biotechnology workshop |
Year(s) Of Engagement Activity | 2021 |
Description | Journal, Aerospace Testing International , Oct 2019 |
Form Of Engagement Activity | A magazine, newsletter or online publication |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Peter Lee 's research work on "How 3D printing is being improved using advanced non-destructive testing" featured on the Aerospace Testing International |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.aerospacetestinginternational.com/opinion/improving-3d-printing-with-ndt.html |
Description | K Zhang talk at FEMS EUROMAT 2023 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | K Zhang talk at FEMS EUROMAT 2023, "Pore evolution during directed energy deposition additive manufacturing", Frankfurt Germany |
Year(s) Of Engagement Activity | 2023 |
Description | Kai Zhang talk at TMS2023 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Kai Zhang talk at TMS2023, Pore Dynamics and Formation Mechanisms during Directed Energy Deposition Additive Manufacturing, California |
Year(s) Of Engagement Activity | 2023 |
Description | Kamran Mumtaz @ 3D Gala in Ulsan, South Korea |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Kamran Mumtaz was an invited speaker at this event ru by KAMUG (Korea Additive Manufacturing User Group) |
Year(s) Of Engagement Activity | 2017 |
URL | http://www.kamug.or.kr/ |
Description | Kamran Mumtaz @ Shanghai Additive Manufacturing Association conference |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Kamran Mumtaz was an invited speaker, and presented on MAPP and elaborated on programme of work. |
Year(s) Of Engagement Activity | 2017 |
URL | http://namic.sg/node/176 |
Description | Keynote N. Shevchenko EPM 2021 Riga |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Keynote N. Shevchenko EPM 2021 Riga; "The Effect of Magnetic Fields on Feeckle Evolution During Solidification". |
Year(s) Of Engagement Activity | 2021 |
Description | Keynote talk, P D Lee, Industrial Workshop on Additive Manufacturing |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | P D Lee gave a presentation entitled "Quantifying dynamic phenomena during laser additive manufacturing using synchrotron imaging" at the Industrial Workshop on Additive Manufacturing |
Year(s) Of Engagement Activity | 2020 |
Description | Keynote talk: 18th International conference on experimental mechanics - Dr Philip Withers (Manchester) & Prof Peter Lee (UCL) 01/07/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Keynote speaker, Philip Withers (MAPP Co-I Manchester University), with collaboration from Prof Peter Lee (MAPP PI UCL), on ' Insights into additive manufacturing and mechanical performance by real time and time lapse X-ray imaging' at ICEM (International Conference on Experimental Mechanics) Conference 01/07/18 |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.icem18.org/ |
Description | Keynote, APICAM2019 The 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM), June 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Peter Lee invited to give a keynote presentation on APICAM2019 The 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM), June 2019, on "In situ Synchrotron Imaging of Additive Manufacturing" |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.apicam2019.com.au/ |
Description | Keynote, Euromat 2019 European Congress & Exhibition on Advanced Materials & Processes, Sept 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Professor peter D Lee invited to give a keynote presentation at the Euromat 2019 European Congress & Exhibition on Advanced Materials & Processes, Sept 2019, on 'In situ and operando fast imaging of additive manufacturing' |
Year(s) Of Engagement Activity | 2019 |
URL | https://euromat2019.fems.eu/ |
Description | Keynote, ICASP-5 and CSSCR-5, June 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Peter D. Lee was invited to give a keynote presentation at the 5th International Conference on Advances in Solidification Process (ICASP-5) and 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5) on "Capturing rapid solidification during laser additive manufacturing using synchrotron imaging" |
Year(s) Of Engagement Activity | 2019 |
URL | http://www.icasp5-csscr5.org/ |
Description | Keynote, plenary talk, P D Lee, Technical University of Denmark |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | P D Lee gave a keynote plenary presentation entitled "Seeing Materials Through a Synchrotron Looking Glass: Inside Additive Manufacturing to Intact Covid-19 Injured Organs with Micron Resolution" at Technical University of Denmark |
Year(s) Of Engagement Activity | 2020 |
Description | LMT2023, Melbourne, Australia - Keynote talk by Enzo Liotti |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Enzo Liotti presented a keynote talk: In-situ study of hot-tear formation and interdendritic flow in Al-Cu and Al-Cu-Fe alloys by X-ray imaging |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.lmt2023.com/speakers.html |
Description | LPW Round Table event - Prof Iain Todd and Dr Richard France attended 03/07/18 |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Iain Todd and Richard France attended an LPW event 'Applying Digital Technology and New Applications of Additive Manufacturing' This included a tour of LPW new facilities and a round table style debate to explore how digital tech can help SMEs. SME's were invited to the event. |
Year(s) Of Engagement Activity | 2018 |
Description | Liberty Steel |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Meeting with Gill Thornton, James Ashby, Simon Pike and Xinjiang Hao - discuss potential collaboration. |
Year(s) Of Engagement Activity | 2017 |
Description | MAPP 2nd International Conference - Presentation by Candice Majewski |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Candice Majewski talk: What lies beneath... Unlocking the mystery of Powdered Polymer AM |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
Description | MAPP 2nd International Conference - Presentation by Felicity Freeman |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Felicity Freeman talk: Advances in LPBF and DED Processing |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
Description | MAPP 2nd International Conference - Presentation by Hamid Toshani |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Hamid Toshani talk: The in-powder miniature sense-and-compute platform |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
Description | MAPP 2nd International Conference - Presentation by Kamran Mumtaz |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Kamran Mumtaz talk: Multi-laser powder bed fusion using diode area melting |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
Description | MAPP 2nd International Conference - Presentation by Martin Jackson |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Martin Jackson talk: The exploitation and future opportunities for FAST/SPS technology |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
Description | MAPP 2nd International Conference - Presentation by Mozhdeh Mehrabi |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Mozhdeh Mehrabi talk: Advanced characterisation of AM powders |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
Description | MAPP 2nd International Conference - Presentation by Rahul Unnikrishnan |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Rahul Unnikrishnan talk: The exploitation and future opportunities for FAST/SPS technology |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
Description | MAPP 2nd International Conference - Presentation by Rohit Malik |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Rohit Malik talk: Robocasting of alumina-based ceramic matrix composites: processing and properties |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
Description | MAPP 2nd International Conference - Presentation by Scott Notley |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Scott Notley talk: AI-enabled advanced optimisation and control in AM |
Year(s) Of Engagement Activity | 2023 |
URL | https://mapp.ac.uk/news/mapp-2nd-international-conference |
Description | MAPP First International Conference |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | MAPP's First International Conference attracted 180 delegates and featuring keynotes from world-leading experts from MAPP's International Scientific Advisory Board. The event attracted delegates and speakers from America, France, Germany, Spain and across the UK, with representatives from over 35 companies and 20 universities. Session topics included: in-situ process and performance characterisation; advanced characterisation; and modelling, optimisation and control. An expert panel, chaired by Sophie Jones, General Manager, Added Scientific, looking at the question 'From Research to Results: Is powder research responding to industry's needs?'. |
Year(s) Of Engagement Activity | 2018 |
URL | https://mapp.ac.uk/news/mapp-epsrc-future-manufacturing-hub-in-manufacture-using-advanced-powder-pr |
Description | MAPP Industry Briefing Event |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | MAPP Investigators and Researchers delivered short talks and Q&A sessions to industry partners on the MAPP Research Programme, with the aim to identify any collaboration opportunities. |
Year(s) Of Engagement Activity | 2020 |
Description | MAPP Lecture - Adam Clare |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Adam T. Clare, University of Nottingham, was our guest speaker on Monday 7th June, from 14:00 to 15:30. He gave the lecture Metal Additive Manufacturing: What Next? via Blackboard Collaborate. It was followed by a short talk, titled Towards Perfect Powders: New Methods for Powder Modification and Re-Use in AM, to be given by Dr James Murray, University of Nottingham. |
Year(s) Of Engagement Activity | 2021 |
URL | https://mapp.ac.uk/events/mapp-lecture-professor-adam-t-clare-university-of-nottingham |
Description | MAPP Lecture - Andrew Moore from Heriot-Watt University giving MAPP lecture |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Andrew Moore gave MAPP lecture on 'Fluid and particle dynamics in laser powder bed fusion' as part of the MAPP lecture series. Local academics and PDRA's attended the lecture. |
Year(s) Of Engagement Activity | 2018 |
URL | https://mapp.ac.uk/events/mapp-lecture-series-professor-andrew-moore |
Description | MAPP Lecture - Dr Carolyn Atkins |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Dr Carolyn Atkins, STFC UK Astronomy Technology Centre, gave the online lecture "Additive manufacture & astronomical instrumentation: down the rabbit hole" in May 2022. 30 attendees |
Year(s) Of Engagement Activity | 2022 |
Description | MAPP Lecture - Dr Hector Basoalto |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | The second lecture in the MAPP Lecture Series - 13th February 2018, by Dr Hector Basoalto, University of Birmingham, who spoke on 'Multiscale Materials Modelling of Microstructure Variations and Property Scatter in Additive Manufacturing'. This lecture was attended by industry colleague, and internal and external academics. |
Year(s) Of Engagement Activity | 2018 |
Description | MAPP Lecture - Dr Matteo Seita |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | In March 2022 Dr Matteo Seita, Nanyang Technological University, Singapore, gave the in-person lecture Microstructure heterogeneity in metal additive manufacturing: A double-edged sword? 29 attendees. |
Year(s) Of Engagement Activity | 2022 |
Description | MAPP Lecture - Dr Paul Hooper (Imperial College London) 13/9/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Paul Hooper from Imperial gave a lecture on 'In-situ monitoring for additive manufacturing (AM): a revolution in process control and inspection?' This was attended by TUOS academics, PDRA's, and external industry/academic delegates. |
Year(s) Of Engagement Activity | 2018 |
URL | https://mapp.ac.uk/events/mapp-lecture-series-dr-paul-hooper |
Description | MAPP Lecture - Dr Philip Stanley-Marbell (Cambridge) 12.12.19 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Professional Practitioners |
Results and Impact | MAPP Lecture given by Philip Stanley Marbell (Cambridge)on Augmenting Raw Materials with Sensing and Computation. |
Year(s) Of Engagement Activity | 2019 |
URL | https://mapp.ac.uk/events/mapp-lecture-series-dr-phillip-stanley-marbell |
Description | MAPP Lecture - Dr Sarah Everton |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Professional Practitioners |
Results and Impact | MAPP Lecture by Sarah Everton,Added Scientific provided insight into the opportunities for additive manufacturing (AM) within quantum technologies.. Invite to MAPP partners and UoS staff and PGR students. |
Year(s) Of Engagement Activity | 2018 |
URL | https://mapp.ac.uk/news/dr-sarah-everton-added-scientific-presented-the-sixth-mapp-lecture |
Description | MAPP Lecture - Dr Simon Hogg (Loughborough University) |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Professional Practitioners |
Results and Impact | MAPP Lecture - Dr Simon Hogg invited to give talk at MAPP (hosted at University of Sheffield) Gave talk on Processing and Characterisation of High Entropy and Spray Formed Alloys |
Year(s) Of Engagement Activity | 2019 |
URL | https://mapp.ac.uk/events/mapp-lecture-series-dr-simon-hogg |
Description | MAPP Lecture - Dr Sophie Cox |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | In September 2022 Dr Sophie Cox, Associate Professor in Healthcare Technologies, University of Birmingham gave the in-person lecture An Overview of the Centre for Custom Medical Devices. 26 attendees. |
Year(s) Of Engagement Activity | 2022 |
Description | MAPP Lecture - Dr Tom Flint |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | MAPP Lecture given by Dr Tom Flint from Manchester University at the MAPP Quarterly Review Meeting at Sheffield. Tom Flint talk: Recent Developments in Mathematical Modelling Frameworks for Advanced Manufacturing Processes. |
Year(s) Of Engagement Activity | 2023 |
Description | MAPP Lecture - Nick Lavery |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Nick Lavery, Director of the Materials Advanced Characterisation Centre (MACH1) and lead academic of the Swansea Manufacturing Research (SAMR) group joined us online to speak about Developing High Entropy Alloys for Additive Manufacturing. |
Year(s) Of Engagement Activity | 2021 |
URL | https://mapp.ac.uk/events/mapp-lecture-series-professor-nick-lavery |
Description | MAPP Lecture - Peter Green 23/02/2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | This MAPP Lecture was delivered by Dr Peter Green, Lecturer in Uncertainty and Engineering at the University of Liverpool on AI Approaches for Automatic Defect Detection in Laser Powder Bed Fusion Builds. It was attended by academics and researchers from the University of Sheffield and other MAPP partner Universities. 30 attendees. |
Year(s) Of Engagement Activity | 2022 |
Description | MAPP Lecture - Prof Richard Todd |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | MAPP Lecture given by Prof Richard Todd of Oxford University at the MAPP Quarterly Review Meeting meeting at ICL. Richard Todd Talk: Accelerated Sintering through Rapid Heating: Evidence, Mechanisms and Prospects. |
Year(s) Of Engagement Activity | 2023 |
Description | MAPP Lecture - Professor Richard Leach |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Professional Practitioners |
Results and Impact | The MAPP Lecture Series began in November 2017 with a lecture by Prof. Richard Leach, University of Nottingham, who spoke on "Enriching additive manufacturing metrology". This lecture was attended by internal academic colleagues. |
Year(s) Of Engagement Activity | 2017 |
URL | https://mapp.ac.uk/news/mapp-lecture-series |
Description | MAPP Lecture - Stefania Soldini |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | The MAPP Lecture 'Connected Everything Feasibility Study on Manufacturing of 3D-printed morphing origami solar sails for next generation of CubeSat' was delivered by Dr Stefania Soldini, Lecturer in Space Engineering at the University of Liverpool, on Thursday 9 December, 2pm - 3.30pm, via Zoom. |
Year(s) Of Engagement Activity | 2021 |
URL | https://mapp.ac.uk/events/mapp-lecture-series-dr-stefania-soldini |
Description | MAPP Lecture Series - Dr Catrin Mair Davies |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Dr Catrin Mair-Davies delivered a lecture to MAPP on Residual Stress Prediction, Mitigation and Model Validation in Laser Powder Bed Fusion of 316H Stainless Steel. |
Year(s) Of Engagement Activity | 2021 |
Description | MAPP Lecture Series - Dr Colin Hare |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Dr Colin Hare delivered a lecture to MAPP on Measuring Powder Flow Under Low Stress Conditions. |
Year(s) Of Engagement Activity | 2020 |
Description | MAPP Lecture Series - Dr Kate Black - 09/05/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Professional Practitioners |
Results and Impact | This lecture was part of the MAPP lecture series. Dr Kate Black, of Liverpool University gave a lecture on Broadening the materials pallet for Additive Manufacturing (AM). This was attended by internal academic colleagues and postgraduate students and researchers at TUOS. |
Year(s) Of Engagement Activity | 2018 |
URL | https://mapp.ac.uk/events/mapp-lecture-series-dr-kate-black |
Description | MAPP Partner Workshop |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Over 50 people, including MAPP's academic investigators and senior representatives from MAPP's industry and High Value Manufacturing Catapult partners, attended the workshop, at the AMRC's Knowledge Transfer Centre. Industry sectors from across the advanced powder process supply chain were represented including end users from aerospace and energy, equipment manufacturers and advanced materials companies. |
Year(s) Of Engagement Activity | 2017 |
URL | https://mapp.ac.uk/news/mapp-partner-workshop |
Description | MAPP Quarterly Researcher Meeting (Day 2) with Industry Partners |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | MAPP Researchers delivered presentation and Q&A sessions on their current work to industry partners with the aim of identifying any collaboration opportunities. |
Year(s) Of Engagement Activity | 2021 |
Description | MAPP Solid State Processing Workshop (Sheffield/Oxford/Imperial) |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | MAPP Solid State Processing Workshop - meeting held 6.11.19 between Sheffield, Oxford and Imperial MAPP Investigators on this specific part of the MAPP research. |
Year(s) Of Engagement Activity | 2019 |
Description | MAPP launch event |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | 150 delegates from industry, academia and HVMC centres attended our launch event in Sheffield. The event included presentations from a mix of MAPP researchers and MAPP industry partners, discussing the core science programme within MAPP and industry's perspective on some of the opportunities and challenges for the technologies. There was a poster session and networking for all delegates. The event prompted significant debate in the sessions and led to discussions with new potential commercial partners. |
Year(s) Of Engagement Activity | 2017 |
URL | https://mapp.ac.uk/news/mapp-launch-a-great-sucess |
Description | MAPP organising & hosting Alloys for Additive Manufacturing Symposium at University of Sheffield. 2 day event 3&4/9/18 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | This international event covered additive manufacturing technologies [AM] which include a metallic phase and was divided into 5 themes over two days : Phase transformations in AM-produced alloys, Alloy design, Advances in processing, Structural control by design, Novel concepts in alloy metamaterials. The AAMS was attended by 105 delegates from industry and academia with 7 keynote speakers from industry and academia. |
Year(s) Of Engagement Activity | 2018 |
URL | https://mapp.ac.uk/news/successful-alloys-for-additive-manufacturing-symposium-aams2018 |
Description | MAPP press release around MAPP 1st International Conference |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Media (as a channel to the public) |
Results and Impact | Press release about the success of the 1st MAPP International Conference. |
Year(s) Of Engagement Activity | 2017 |
URL | https://mapp.ac.uk/news/mapp-epsrc-future-manufacturing-hub-in-manufacture-using-advanced-powder-pr |
Description | MAPP press release around launch event |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Media (as a channel to the public) |
Results and Impact | Announcement that MAPP, the EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder Processes launched on Tuesday 31st January in Sheffield. Story covered by The Manufacturer and other engineering news media. |
Year(s) Of Engagement Activity | 2017 |
URL | https://www.sheffield.ac.uk/materials/news/mapp-hub-launches-1.677769 |
Description | MAPP website launch |
Form Of Engagement Activity | Engagement focused website, blog or social media channel |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Launch of MAPP website giving an overview of the research programme, aligned projects, researchers, membership of industrial and scientific advisory boards, events, news and blogs. |
Year(s) Of Engagement Activity | 2016 |
URL | https://mapp.ac.uk/ |
Description | MAPP, CiET, ONR, DRees, RR (Rolls-Royce) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | D Rees gave a presentation entitled "Synchrotron Imaging of the Influence of Oxidation with Powder Age on Cracking Phenomena during Laser Powder Bed Fusion of CM247" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | MAPP-Birmingham Visit |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | To discuss potential future collaboration with MAPP. |
Year(s) Of Engagement Activity | 2017 |
Description | MCWASP XVI Conference, Banff, Canada - Presentation by Enzo Liotti |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Enzo Liotti presented a talk: In-situ study of hot-tear formation and interdendritic flow in Al-Cu and Al-Cu-Fe alloys by X-ray imaging |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.meet-here.ca/mcwaspxvi/HOME |
Description | MMC (Microscience Microscopy Congress) 2023, Manchester, UK - Plenary talk by Phil Withers |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Philip J Withers Plenary Talk: Correlative 3D and 4D Electron and X-Ray Microscopy |
Year(s) Of Engagement Activity | 2023 |
Description | MS&T Conference, USA - Prof Iain Todd gave presentation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd attended and gave presentation at MS&T Conference, USA (Materials Science Technology) 1-3 October 2019 Raised MAPP profile |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.showsbee.com/fairs/42389-Materials-Science-Technology-2019.html |
Description | MSE 2022 conference, Germany |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Mozhdeh Mehrabi gave a talk at the conference - Characterization of metal powder for additive manufacturing process. |
Year(s) Of Engagement Activity | 2022 |
Description | MTC PhD Competition (replacing MTC PhD Conference) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Ollie Osbourne from Imperial College London updated the MTC and their industry members on the progress and future plans in ceramics DPL |
Year(s) Of Engagement Activity | 2020 |
Description | Mark Swan @ AWE Visit |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Visit by Mark Swan from AWE - discussed potential for collaboration. |
Year(s) Of Engagement Activity | 2010,2017 |
Description | Masaki Taneike @ Mitsubishi Heavy Industries |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Visit by Masaki Taneike from Mitsubishi - discussed potential for collaboration. |
Year(s) Of Engagement Activity | 2018 |
Description | Materials Research Exchange - MAPP Exhibition stand |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Richard France & Karen Wood attended event. MAPP represented on Sheffield's stand - promoting information about the Hub and upcoming opportunities. |
Year(s) Of Engagement Activity | 2019 |
URL | https://ktn-uk.co.uk/events/live-materials-research-exchange-2020 |
Description | Materials Science and Technology 2023 - Eduardo Saiz was a session chair |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Eduardo Saiz was a session chair |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.matscitech.org/mst23/downloads/MST23-FinalProgram.pdf |
Description | Materials Science and Technology 2023 - Two invited talks by Eduardo Saiz |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Eduardo Saiz Invited Talks: Embedded Printing in Ceramics and Printing of Ceramic Composites |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.matscitech.org/mst23/downloads/MST23-FinalProgram.pdf |
Description | MechEng Night: For The Love of Engineering - Prof Peter Lee (UCL) 14/02/2019 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Public/other audiences |
Results and Impact | Presentation of Research in our group to the general public in a London West End Theatre |
Year(s) Of Engagement Activity | 2018 |
URL | https://mecheng.ucl.ac.uk/events/for-the-love-of-engineering/ |
Description | Mechanical performance of Embedded 3D Printing ceramic composites- European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2021) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Disseminating the work of the group between international academic and industrial audience |
Year(s) Of Engagement Activity | 2021 |
Description | Meeting with Additive Manufacturing Technologies - 15/2/19 - Dr Candice Majewski |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Dr Candice Majewski met with AMT to discuss a potential KTP collaboration |
Year(s) Of Engagement Activity | 2018 |
URL | https://amtechnologies.co.uk/ |
Description | Meeting with Embassy of Japan, D Rees |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Public/other audiences |
Results and Impact | D Rees attended a meeting with M McEvoy from the Embassy of Japan for an exhibition on accessibility in the arts. |
Year(s) Of Engagement Activity | 2020 |
Description | Meeting with Inovink - Dr Candice Majewski |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Dr Candice Majewski hosted a meeting to discuss potential collaboration regarding ink development |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.inovink.com/ |
Description | Meeting with Knorr-Bremse - Dr Candice Majewski |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Dr Candice Majewski (MAPP Investigator) hosted a meeting to discuss potential uses of AM with Knorr-Bremse. Manufacturer of braking systems for both commercial road and all rail vehicles and subsystems. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.knorr-bremse.co.uk/en/ |
Description | Meeting with YEH group - Dr Candice Majewski - 24/10/18 |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Dr Candice Majewski hosted a meeting with the YEH group to discuss potential collaboration regarding polymer materials |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.yeh-group.com/ |
Description | Member, Advisory Board of EPSRC CDT in Innovative Metal Processing (IMPaCT), Feb 2019 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Peter D Lee invited to be part of the Advisory Board of EPSRC CDT in Innovative Metal Processing (IMPaCT) |
Year(s) Of Engagement Activity | 2019 |
Description | Member, IEEE International Conference on Multimedia and Expo (ICME) 2019 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Peter Lee invited to to act as a member of the International Advisory Committee (IAC) for ICME 2019 |
Year(s) Of Engagement Activity | 2019 |
URL | http://www.icme2019.org/ |
Description | Member, STFC Scientific Advisory Board Meeting, Feb 2019 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Peter D Lee invited to be a member of the Scientific Advisory Board of the STFC Annual Meeting |
Year(s) Of Engagement Activity | 2019 |
Description | Michael Preuss - HexMat HCP Alloys Workshop - speaking |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Michael Preuss gave a 30 minute presentation to the HexMat HCP Alloys Workshop. The HexMat Programme Grant brings together a consortium of three UK universities, Imperial College London (lead), University of Oxford and University of Manchester, with industrial partners from the aerospace, energy and defence sectors, aiming to make the UK a world leader in hexagonal alloy systems. Michael Preuss also chaired one of the workshop sessions. This workshop was attended by both University and industry partners. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.imperial.ac.uk/hexmat |
Description | Multi-material Printing with Ceramics and Metals-Materials for Humanity MH21-July 21- Singapore |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Disseminating the work of the group between international academic and industrial audience |
Year(s) Of Engagement Activity | 2021 |
Description | NARIT - Thailand. Outreach event |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Rob Snell - Outreach with NARIT in Thailand to showcase latest project. |
Year(s) Of Engagement Activity | 2022 |
Description | NNUMAN community workshop 3/10/18 - Michael Preuss invited speaker |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | NNUMAN community workshop - Michael Preuss (MAPP Co-Investigator, University of Manchester was invited speaker. Raised MAPP profile. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.dalton.manchester.ac.uk/research/impact/new-nuclear-manufacturing/ |
Description | NNUMAN community workshop at Culham 31.1.20 - Michael Preuss invited speaker |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | NNUMAN (New Nuclear Manufacturing )community workshop at Culham 2020 - Michael Preuss invited speaker |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.dalton.manchester.ac.uk/research/impact/new-nuclear-manufacturing/ |
Description | NUMAT22 Conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Rahul Unnikrishnan presented MAPP research at NUMAT22 Conference (24th October-28th October in Ghent). Solid state joining of austenitic and ferritic steels using field assisted sintering (FAST) |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.elsevier.com/events/conferences/the-nuclear-materials-conference/program |
Description | Nanomechanical Testing in Materials Research and Development VII, Torremolinos/Malaga, Spain - Max Emmanuel gave poster presentation (Imperial College London) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Measuring the fracture energy of WC grain boundaries" - poster presentation given by Max Chester Jude Emmanuel (MAPP PhD student - Imperial College London) Raised profile of MAPP. |
Year(s) Of Engagement Activity | 2019 |
URL | http://www.engconf.org/conferences/mechanical-engineering-heat-transfer-without-mass-transfer/nanome... |
Description | National Institute of Additive Manufacturing (China) visit (hosted by Prof Iain Todd) |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) hosted delegates from NIAM (China) to discuss future possible collaborations |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.niiam.cn/col.jsp?id=130 |
Description | News Scientist (Human Brains Organioids in Cheap 3D Printed Bioreactor) |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Media (as a channel to the public) |
Results and Impact | Interview on the Drive show - BBC Radio Berkshire. Candice Mekewski was invited to talk about the limitation of 3D printing. |
Year(s) Of Engagement Activity | 2021 |
URL | https://institutions.newscientist.com/article/2273694-human-brain-organoids-grown-in-cheap-3d-printe... |
Description | News article - Lee and Luo named Fellows of the Royal Academy of Engineering |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Public/other audiences |
Results and Impact | News article on UCL website: Lee and Luo named Fellows of the Royal Academy of Engineering. P D Lee |
Year(s) Of Engagement Activity | 2020 |
Description | News article - Ultra-fast X-ray imaging of keyhole dynamics during laser 3D printing |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | News article on ESRF website, "Ultra-fast X-ray imaging of keyhole dynamics during laser 3D printing". A Leung and P D Lee. |
Year(s) Of Engagement Activity | 2020 |
Description | Opening talk at the University of Seville |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | Eduardo Siaz from Imperial College London delivered an opening talk in the VII meeting on Research and Innovation at the University of Seville |
Year(s) Of Engagement Activity | 2020 |
Description | Organise symposium, PD Lee, TMS2022 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | PD Lee organised and chaired "Defects and Properties of Cast Metals" symposium at TMS2022 |
Year(s) Of Engagement Activity | 2021 |
Description | Organise workshop - SPARC - Workshop on in situ X-ray imaging: applications and modelling |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Online workshop on in situ X-ray imaging: applications and modelling. 150 registrants, 8 Talks by world experts covering applications in metals, additive manufacturing, biomedical studies including Covid, Hands-on sessions in image processing and quantification in 2D and 3D |
Year(s) Of Engagement Activity | 2021 |
Description | Outreach Activity - 3D Printing an Being a Scientist |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Schools |
Results and Impact | Dr Rob Snell delivered to a class via Skype about 3D printing and being a scientist |
Year(s) Of Engagement Activity | 2020 |
Description | Outreach Activity - Materials and Nanoscience Twitter Takeover |
Form Of Engagement Activity | Engagement focused website, blog or social media channel |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Media (as a channel to the public) |
Results and Impact | The University of Sheffield curated a sci comm Twitter account called @Realsci_Nano_scientists involved in materials and nano-science take over for a week and post a "week in the life of a real scientist" |
Year(s) Of Engagement Activity | 2020 |
URL | https://www.twitter.com/realsci_nano?lang=en |
Description | Outreach Activity with the Trinity Academy Doncaster |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Schools |
Results and Impact | University of Sheffield (Alex Goodall) has created a university style modules about 3D printing through and organisation called The Brilliant Club. Alex delivers this module to give valuable extra curricular experience to people who are less privileged to attend prestigious universities. |
Year(s) Of Engagement Activity | 2020 |
Description | PACRIM13 27 October - 1 November 2019, Okinawa, Japan |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Iuliia Elizarova (MAPP PDRA Imperial College London) gave presentation on "Robocasting of Conformable Ceramics" at PACRIM |
Year(s) Of Engagement Activity | 2019 |
URL | http://www.ceramic.or.jp/pacrim13/ |
Description | PARTEC -2023, International Congress on Particle Technology, Nuremberg, Germany - Presentation by Mozhdeh Mehrabi |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Mozhdeh Mehrabi talk: Effect of particle characteristics and environmental conditions on the spreading behaviour of metal powders |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.partec.info/en |
Description | PARTEC2019 - oral presentation by Jabbar Gardy (Uni of Leeds) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Jabbar Gardy (PDRA at University of Leeds) gave presentation: Effects of temperature and base plate surface roughness on powder spreading in Additive Manufacturing process |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.partec.info/en/congress-info/about-2019 |
Description | PD Lee 2023 Organised Workshop at ESRF User Meeting |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee organised a meeting on large scale sCT imaging at BM18 at the 2023 ESRF User Meeting with over 60 in person attendees and more on line. Presentations included imaging AM, composite, battery and bio-applications. |
Year(s) Of Engagement Activity | 2023 |
Description | PD Lee attended ESA/ESTEEC Meeting |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PDL attended ESA/ESTEEC Meeting - Physical Sciences Working Group, The Netherlands |
Year(s) Of Engagement Activity | 2023 |
Description | PD Lee attending an event at the Royal Society |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | PD Lee attending an event at the Royal Society to hear the Royal Society Clifford Paterson Medal and Lecture, UK |
Year(s) Of Engagement Activity | 2022 |
Description | PD Lee talk at ForMGE |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee talk at ForMGE 2022 "Integrated Computational Materials Engineering", |
Year(s) Of Engagement Activity | 2022 |
Description | PD Lee talk for European XFEL |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee invited talk for European XFEL "Scientific Opportunities with very Hard XFEL Radiation", Hamburg |
Year(s) Of Engagement Activity | 2023 |
Description | PD Lee, CLA Leung, AM hub Meeting |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee and CLA Leung attended an meeting to form a hub for dynamic and large scale synchrotron imaging of additive manufacturing at ESRF. The proposal will be submitted in Jan 2024 and the Hub would start in Autumn 2024 if successful, bringing together groups from across Europe. |
Year(s) Of Engagement Activity | 2023 |
Description | PD Lee, Invited talk at WAM2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Invited speaker at WAM 2021, (ESRF) C/ In-operando characterization |
Year(s) Of Engagement Activity | 2021 |
Description | PD Lee, Invited talk at WMG |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee, Invited talk at WMG, In situ and operando synchrotron experiments for additive manufacturing model validation |
Year(s) Of Engagement Activity | 2022 |
Description | Paper for proceedings - Ryan Brown - International Solid Freeform Fabrication Symposium, Austin, Texas ,4 day event 13-16 August 2018 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | TUOS - Paper was submitted for proceedings of International Solid Freeform Fabrication Symposium by Ryan Brown (TUOS MAPP aligned) |
Year(s) Of Engagement Activity | 2018 |
URL | http://sffsymposium.engr.utexas.edu/ |
Description | Particle Technology Forum, Edinburgh - 1 oral presentation Yi He |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | UK-China International Particle Technology Forum VII Edinburgh 28-31 July 2019 Oral presentation from Yi He (PDRA MAPP - University of Leeds) Raised profile of MAPP |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.ptf7.eng.ed.ac.uk/ |
Description | Particle Technology Forum, Edinburgh - 1 poster by Mozdeh Mehrabi (Leeds Uni) |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | UK-China International Particle Technology Forum VII,, Edinburgh - 1 poster by Mozdeh Mehrabi (MAPP PhD student, Leeds) Raised profile of MAPP 28-31 July 2019 |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.ptf7.eng.ed.ac.uk/ |
Description | Patrick Grant - Plenary: 9th Int. Conf. Adv. Materials and Processing (ICAMP-9), China (September) 25-28 September |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Patrick Grant (MAPP PI, Oxford) - Plenary: 9th Int. Conf. Adv. Materials and Processing (ICAMP-9), China (September) 25-28 September Promoted latest research findings related to powder processing and engaged in latest scientific and technological debates; established new international links for potential future collaborations. |
Year(s) Of Engagement Activity | 2018 |
URL | http://conf.neu.edu.cn/icamp-9/page1.html |
Description | Patrick Grant - plenary talk at 15th Int. Symp. Functionally Graded Materials, Japan (5/8/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Promoted latest research findings related to powder processing and engaged in latest scientific and technological debates; established new international links for potential future collaborations. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.fgms.net/isfgms2018/ |
Description | Paul Goodwin @ TWI |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Visit by Paul Goodwin from TWI - discussed potential for collaboration. |
Year(s) Of Engagement Activity | 2017 |
Description | Peter Lee @ Frontiers In Material Processing Applications, Research & Technology (FiMPART) meeting, Bordeaux, France |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Peter Lee was an invited speaker, and presented on: 'Informing and validating ICME models using synchrotron imaging'. |
Year(s) Of Engagement Activity | 2017 |
URL | http://www.fimpart.org/2017/wp/ |
Description | Peter Lee @ Quality Control for Additive Manufacturing |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | European Society for Precision Engineering and Nanotechnology (euspen). Special Interest Group Meeting: Quality Control for Additive Manufacturing. Peter Lee gave a lecture - "X-ray tomography for additive manufacturing: from metrology to in situ process control" (with Alex C. L. Leung) - covering research activities at the Diamond Light Source and Harwell Research Complex. |
Year(s) Of Engagement Activity | 2017 |
URL | http://www.euspen.eu/our-events/programme-quality-control-for-additive-manufacturing/ |
Description | Peter Lee @ Queen Mary University London |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Peter Lee was an invited speaker, and presented on 'Seeing materials through a synchrotron looking glass'. |
Year(s) Of Engagement Activity | 2017 |
Description | Peter Lee @ Richmond Scientific Society |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Peter Lee was an invited speaker, and presented on '4D Science; how we use synchrotron x-ray glasses to see inside a volcano'. |
Year(s) Of Engagement Activity | 2017 |
URL | http://www.hampsteadscience.ac.uk/rss_prog_16.htm |
Description | Peter Lee @ Symposium: The Application of Computed Tomography in Earth, Material and Engineering Sciences, The University of Strathclyde |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Peter Lee was an invited speaker, and presented on 'In situ synchrotron tomography imaging of advanced manufacturing processes to magma flows'. |
Year(s) Of Engagement Activity | 2017 |
URL | http://www.ogic.co.uk/symposium-application-computed-tomography-earth-material-engineering-sciences/ |
Description | Peter Lee @ The European Congress and Exhibition on Advanced Materials and Processes (EUROMAT), Thessaloniki, Greece |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Peter Lee was an invited speaker, and presented on 'Revealing the melting and solidification behavior of light metals using in situ synchrotron x-ray imaging' |
Year(s) Of Engagement Activity | 2017 |
URL | http://euromat2017.fems.eu/ |
Description | Phantoms for Medical Researh |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Undergraduate students |
Results and Impact | Candice Majewski pre recorded a speech for the virtual mini-symposium 'Phantoms for Medical Research' |
Year(s) Of Engagement Activity | 2020 |
URL | https://www.ucl.ac.uk/interventional-surgical-sciences/events/2020/dec/phantoms-medical-research |
Description | Photography competition entered by Dr Jabbar Gardy - Thermo Fisher Scientific - October 2018 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Photographic image - Electron microscope image entered into national photographic competition run by Thermo Fisher Scientific by Dr Jabbar Gardy (MAPP PDRA at University of Leeds) He won a prize in October 2018 ( the prize is also recorded under Awards outcome) |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.fei.com/image-contest/2018-monthly-winners/ |
Description | Pilot TV show - Candice Majewski |
Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Candice Majewski took part in a pilot TV show production, invited as a 3D Printing expert |
Year(s) Of Engagement Activity | 2023 |
Description | Pint of Science |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Public/other audiences |
Results and Impact | Approximately 60 people attended over two days of a Pint of Science event in Sheffield. These events take place in local pubs and include talks and demos. We ran a 3D Printing demonstration, enabling us to show and discuss the benefits and context of AM. The PDRA employed on this project produced the following blog post with more detail: |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.sheffield.ac.uk/mecheng/news-events/additive-manufacturing-pint-of-science-1.782944 |
Description | Plenary Speaker, 5th UK-China steel Research Forum - Prof Peter Lee (UCL) 04/07/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Plenary talk, Prof Peter Lee (MAPP PI UCL), on 'Synchrotron imaging of laser additive manufacturing of steels' 5th UK-China steel Research Forum - Prof Peter Lee (UCL) 04/07/18 Also chaired workshop session Co-authors of talk: P. D. Lee, S. Clark (MAPP PDRA), C. L. A. Leung (MAPP PDRA), & R.C. Atwood |
Year(s) Of Engagement Activity | 2018 |
URL | https://more.bham.ac.uk/ukchinasrf5/ |
Description | Plenary Talk at TU Delft |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | P. Lee invited Plenary Talk at TU Delft, "Validating additive manufacturing models using In situ and operando synchrotron experiments" |
Year(s) Of Engagement Activity | 2022 |
Description | Plenary Talk, European Powder Metallurgy Association - Euro PM2019 Congress & Exhibition, Oct 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Chu Lun Alex Leung was invited to give a plenary talk at the European Powder Metallurgy Association - Euro PM2019 Congress & Exhibition, Oct 2019, on "X-ray imaging of powder consolidation during laser additive manufacturing" |
Year(s) Of Engagement Activity | 2019 |
URL | https://thesiscompetition.epma.com/ |
Description | Plenary talk, Powder Meet 2018 - Stockholm - Prof Peter Lee (UCL) 05/11/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Plenary talk, Prof Peter Lee (MAPP PI UCL), "Capturing rapid solidification during laser additive manufacturing using synchrotron imaging", at Powder Meet 2018 Conference Stockholm |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.jernkontoret.se/sv/publicerat/nytt-fran-jernkontoret/nyheter/2018/Natverka-med-nordiska-... |
Description | Podcast 3 Degrees Discussion |
Form Of Engagement Activity | A broadcast e.g. TV/radio/film/podcast (other than news/press) |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | Candice Majewski discussion on YouTube with Mike Vasquez PhD - 3 Degrees Discussion. |
Year(s) Of Engagement Activity | 2020 |
URL | https://www.youtube.com/watch?v=QY393WX3fD8&feature=youtu.be |
Description | Poster Y Huang, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Y Huang gave a presentation entitled "In situ X-ray Observation and Quantification of Keyhole-induced Porosity during Laser Additive Manufacturing" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Poster (2 posters) presentation on powder flow at Granular Matters Conference, Boston, USA, 22-27 July 2018 - Prof Andrew Bayly |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Poster (2 posters) presentation on powder flow at Granular Matters Conference, Boston, USA, 22-27 July 2018 by Prof Andrew Bayly (MAPP PI for University of Leeds) |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.grc.org/granular-matter-conference/2018/ |
Description | Poster Presentation - ChemEng Day UK 2018 held at University of Leeds - Mozdeh Mehrabi 27/28 March |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Poster Presentation - ChemEng Day UK 2018 held at University of Leeds 27/28 March - Mozdeh Mehrabi (MAPP PhD student - University of Leeds) ChemEng Day 'Molecules to Manufacturing' was held at University of Leeds and abstract headings included Process and product characterisation • Influence of structure and components on product functionality • Modelling between scales • Process monitoring and control of manufacturing processes • Education & Dissemination of research |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.wikicfp.com/cfp/servlet/event.showcfp?eventid=69899©ownerid=105251 |
Description | Poster Presentation - ChemEng Day UK 2018 held at University of Leeds - Jabbar Gardy 27/28 March |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Poster Presentation - ChemEng Day UK 2018 held at University of Leeds - 27/28 March - Jabbar Gardy (MAPP Post Doctoral Research Associate at University of Leeds) presented poster on MAPP research. ChemEng Day 'Molecules to Manufacturing' was held at University of Leeds and abstract headings included Process and product characterisation • Influence of structure and components on product functionality • Modelling between scales • Process monitoring and control of manufacturing processes • Education |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.wikicfp.com/cfp/servlet/event.showcfp?eventid=69899©ownerid=105251 |
Description | Poster presentation by David Rees at TMS2023 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Poster presentation by David Rees, A-56: Synchrotron X-ray Imaging of the Effect of TiB2 Additions on Laser Powder Bed Fusion (LPBF) of Al-2139, California |
Year(s) Of Engagement Activity | 2023 |
Description | Poster presentation by Elena Ruckh at TMS2023 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Poster presentation by Elena Ruckh, Additive Manufacturing Process Map of Ti6Al4V Using In Situ and Operando Synchrotron Radiography, California |
Year(s) Of Engagement Activity | 2023 |
Description | Poster presentation, D Rees, 2020 TMS Annual Meeting & Exhibition |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | D Rees presented a poster (other authors, CLA Leung, J Elambasseril, S Marussi, S Shah, S Marathe, M Brandt, M Easton, PD Lee) entitled "Synchrotron imaging of the influence of TiB2 on cracking phenomena during laser powder bed fusion of Al2139" at 2020 TMS Annual Meeting & Exhibition |
Year(s) Of Engagement Activity | 2020 |
Description | Poster, A Bhatt, ICTMS 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Poster, A Bhatt, ICTMS 2022, Characterisation of Surface Roughness During Laser Powder Bed Fusion Additive Manufacturing by In-Situ X-Ray Imaging |
Year(s) Of Engagement Activity | 2022 |
Description | Poster, A Bhatt, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | A Bhatt gave a presentation entitled "Quantifying Surface Roughness in Additive Manufactured Ti-6AI-4V Using In-situ X-ray Imaging" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Poster, ICASP-5 and CSSCR-5, June 2019 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Samuel Clark presented a poster at the 5th International Conference on Advances in Solidification Process (ICASP-5) and 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5), on "In Situ and Operando Synchrotron Quantification of Primary Solidification in IN713C during Additive Manufacturing" |
Year(s) Of Engagement Activity | 2019 |
URL | http://www.icasp5-csscr5.org/ |
Description | Poster, TMS 2019 Annual Meeting, March 2019 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Lorna Sinclair presented a Poster at the TMS 2019 Annual Meeting, on "Quantifying laser-matter interactions and their impact on defect formation during additive manufacturing of Ti-6Al-4V using in situ synchrotron X-ray imaging" |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.tms.org/TMS2019/Home/TMS2019/Default.aspx?hkey=18424fbe-f410-46d8-92a5-a7ca19c54ee3 |
Description | Powders and Granular Materials Challenges and Future Trends, France - Oral presentation by Mozdeh Mehrabi (PhD student, MAPP, Leeds) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Oral presentation by Mozdeh Mehrabi (PhD student, MAPP, Leeds) Raised profile of MAPP activity. |
Year(s) Of Engagement Activity | 2019 |
URL | https://pgm2019.sciencesconf.org/ |
Description | Presentation at "Alloys for Additive Manufacturing Symposium 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | S. Hocine Presentation "Operando monitoring of laser powder bed fusion process using synchrotron X-rays and other correlative techniques" |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.unibw.de/aams22-en |
Description | Presentation at Alloys for Additive Manufacturing Symposium 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | D. Rees presentation "Capturing the effect of powder oxidation on hot cracking in LAM of CM247LC using in situ synchrotron X-ray imaging" |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.unibw.de/aams22-en/program |
Description | Presentation at Alloys for Additive Manufacturing Symposium 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | S. Bhagavath invited presentation "Image processing application -a hands-on session using Fiji ImageJ" at Alloys for Additive Manufacturing Symposium 2022 |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.unibw.de/aams22-en/program |
Description | Presentation at EMAG 2020: Microscopy Enables by Direct Electron Detection |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Other audiences |
Results and Impact | IOP webinar for the physics community to show-case the modelling, development , use and analysis of direct electron detectors within electron microscopy. University of Sheffield presented here. |
Year(s) Of Engagement Activity | 2020 |
Description | Presentation at New Frontiers in Materials Design for Laser Additive Manufacturing Conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | A. Leung presentation on "Seeing melt pool dynamics during powder bed fusion with X-ray" |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.dfg.de/foerderung/info_wissenschaft/2020/info_wissenschaft_20_91/index.html |
Description | Presentation at University of Manchester PDRA Forum |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Postgraduate students |
Results and Impact | The University of Manchester MAPP Researchers presented their work at the University of Manchester PDRA Forum. |
Year(s) Of Engagement Activity | 2020 |
Description | Presentation at the Idea Forum Workshop on Multi-scale imaging and modelling organised by the University of Manchester at Harwell (6th July 2021) - Rahul Unnikrishnan |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Presentation at the Idea Forum Workshop on Multi-scale imaging and modelling organised by the University of Manchester at Harwell (6th July 2021) - Rahul Unnikrishnan |
Year(s) Of Engagement Activity | 2022 |
Description | Presentation at the UK Solidification Meeting, Brunel University |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | P. Lee presented "New insights into additive manufacturing using synchrotron imaging" at the UK Solidification conference Meeting hosted by Brunel University |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.lime.ac.uk/events/the-uk-solidification-workshop-2022 |
Description | Presentation at the University of Manchester Post Doctorate Forum |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Postgraduate students |
Results and Impact | University of Manchester researchers presented their MAPP work at their post doctorate forum. |
Year(s) Of Engagement Activity | 2020 |
Description | Presentation by Yun Deng at the MSE 2022 conference, Germany |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | MSE Congress is the leading international Materials Science and Engineering Congress in Germany. The scientific program features world-renowned experts and aspiring young researchers. |
Year(s) Of Engagement Activity | 2022 |
URL | https://dgm.de/mse/2022 |
Description | Presentation of research findings and their use - Field Assisted Sintering of ODS Steels for Advanced Fission Applications'', Oral presentation at MAPP 1st International Conference, Sheffield, 30-31 January, 2018 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Gained audience interest and questions; furthered knowledge in the field |
Year(s) Of Engagement Activity | 2018 |
Description | Presentation to Industry and Academics at MAPP First International Conference 30-31 Jan. 2018 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Invited speaker, presented on 'Shining new light on the mechanisms controlling laser additive manufacturing using synchotron imaging'. |
Year(s) Of Engagement Activity | 2018 |
URL | https://mapp.ac.uk/events/mapp-1st-international-conference |
Description | Presented a poster on post-HIPping study using XCT at ToScA UK & Europe 2021 (1-3 September 2021) - Rahul Unnikrishnan |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Presented a poster on post-HIPping study using XCT at ToScA UK & Europe 2021 (1-3 September 2021) - Rahul Unnikrishnan |
Year(s) Of Engagement Activity | 2022 |
Description | Press Release, ESRF The European Synchrotron, May 2018 |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Peter Lee's Work featured on the ESRF The European Synchrotron Webpage: "Taking additive manufacturing's heart beat #weekendusers" |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.esrf.eu/home/news/general/content-news/general/taking-additive-manufacturings-heart-beat... |
Description | Press release, Diamond Light Source (DLS) |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Peter Lee's Work featured on the Diamond Light Source Web page: "Shedding new light on laser additive manufacturing" |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.diamond.ac.uk/Science/Research/Highlights/2018/laser-additive-manufacturing.html |
Description | Press release, PD Lee, ESRFnews June |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | Press release, "Need for Speed", ESRFnews June, PD Lee |
Year(s) Of Engagement Activity | 2021 |
Description | Primary Engineer Grading Day - South Yorkshire Region |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Regional |
Primary Audience | Schools |
Results and Impact | E. Chao, R. Brown and M. Mehrabi assisted with the Primary Engineer Judging Day for the applications from the South Yorkshire region. |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.primaryengineer.com/ |
Description | Primary Engineer Judging Day - South Yorkshire Region |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Regional |
Primary Audience | Schools |
Results and Impact | E. Chao, M.Pham and J. Samuel assisted with the Primary Engineer Judging Day for the applications from the South Yorkshire region. |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.primaryengineer.com/ |
Description | Prof Iain Todd - Meeting with Imerys (organised by Research Services) 17/04/18 |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | To identify mutual benefits and shared interests and agree on initial collaboration projects with Imerys |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.imerys.com/scopi/group/imeryscom/imeryscom.nsf |
Description | Prof Iain Todd - Meeting with TWI Sheffield (with MSE BDM) 19/10/18 |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) and MSE BDM (Neil Lowrie) met TWI representative to discuss TWI Innovation Centres and collaboration opportunities |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.twi-global.com/ |
Description | Prof Iain Todd - meeting with representative from Johnson Matthey |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) - meeting with representative from Johnson Matthey to show facilities on Additive Manufacturing |
Year(s) Of Engagement Activity | 2018 |
URL | https://matthey.com/ |
Description | Prof Iain Todd - meeting with representative from KUKA systems |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd met with rep from KUKA to discuss Additive Manufacturing |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.kuka.com/en-gb |
Description | Prof Iain Todd - met researchers from Dublin City University |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd - met researchers from Dublin City University to look at potential research collaboration with MAPP/RTC |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.dcu.ie/ |
Description | Prof Iain Todd and Dr Martin Jackson met with Doncasters Bramah to discuss possible collaboration activities 1/5/18 |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) and Dr Martin Jackson (MAPP Co-I) met with Doncasters Bramah to disseminate information on current research and discuss possible future collaborations. |
Year(s) Of Engagement Activity | 2018 |
Description | Prof Iain Todd and Dr Richard France met with Sandvik |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) and Dr Richard France (MAPP SBDM) met with Sandvik - who wanted to learn more about MAPP, and the full AMRC set up. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.home.sandvik/en/ |
Description | Prof Iain Todd and Dr Richard France met with TTP (Technology Partnership Cambridge) 19/04/18 |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd(MAPP Director) and Dr Richard France (MAPP SBDM) met with Technology Partnership Cambridge discuss possible collaboration powder manufacturing /AM |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.ttp.com/ |
Description | Prof Iain Todd and PhD students met GKN to showcase research undertaken by PhD students |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd and PhD students met GKN to showcase research undertaken by PhD students |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.gkn.com/ |
Description | Prof Iain Todd and Prof Mark Rainforth met (with other MSE academics) ALFED - Aluminium Federation |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) & Prof Mark Rainforth (MAPP Co-I) met (with other MSE academics) ALFED - Aluminium Federation to discuss potential links between MSE & ALFED |
Year(s) Of Engagement Activity | 2018 |
URL | https://alfed.org.uk/ |
Description | Prof Iain Todd and Richard France met with ATI (Aerospace Technology Partnership) 27/03/2018 |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | to discuss EPSRC MAPP Hub, Royce Centre and the ALFA proposal |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.ati.org.uk/ |
Description | Prof Iain Todd hosted visit from Industrial Steering Group DRAMA group (MTC - Manufacturing Technology Centre) 24/04/18 |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | DRAMA visited UOS to gain an overview of MAPP capability and projects, especially those that might be relevant to the DRAMA project. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.the-mtc.org/ |
Description | Prof Iain Todd met with Additive Industries |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) met Additive Industries setting up New UK & Ireland AM Process and Development Centre. They wanted to engage with a number of key organisations to establish exactly what services the centre should offer and also investigate how they can support UK organisations involved in AM through partnerships and collaborations. |
Year(s) Of Engagement Activity | 2018 |
URL | https://additiveindustries.com/ |
Description | Prof Iain Todd met with Aeromet |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) met with head of Metallurgical science for Aeromet International Ltd, to discuss possible future collaboration |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.aeromet.co.uk/ |
Description | Prof Iain Todd met with Solar Turbines (arranged in conjunction with MSE Business Development Manager) |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) met with Solar Turbines for continuing discussions on potential collaborations. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.solarturbines.com/en_US/index.html |
Description | Prof Iain Todd speaking at PTSIG - (Particle Technology Special Interest Group) IChemE AGM - 15/2/19 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd invited to speak at PTSIG (Particle Technology Special Interest Group) IChemE AGM - speaking on Performance on Demand: delivering on the promise of Additive Manufacture". |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.icheme.org/agm-2019 |
Description | Prof Mark Rainforth - HexMat HCP Alloys workshop - speaking 05/04/18 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Mark Rainforth (MAPP Co-Investigator at University of Sheffield) gave a 30 minute presentation to the HexMat HCP Alloys Workshop. The HexMat Programme Grant brings together a consortium of three UK universities, Imperial College London (lead), University of Oxford and University of Manchester, with industrial partners from the aerospace, energy and defence sectors, aiming to make the UK a world leader in hexagonal alloy systems. This session was attended by University and industry partners. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.imperial.ac.uk/hexmat |
Description | Project progress workshops in SECO |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Study participants or study members |
Results and Impact | Imperial College London presented the progress of the PhD project to the audience. |
Year(s) Of Engagement Activity | 2020 |
Description | RAMS 2019, 8th-9th September, 2019, Liverpool, UK - Eduardo Saiz gave invited talk |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Eduardo Saiz (Co-Investigator Imperial College London) gave invited talk "Additive Manufacturing and Structural Control of Ceramics". Raised MAPP Profile |
Year(s) Of Engagement Activity | 2019 |
URL | https://rams-uk.com/invited-speakers/ |
Description | RCaH Research Showcase - keyhole imaging of LPBF |
Form Of Engagement Activity | A magazine, newsletter or online publication |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Research Showcase article - "New insights into laser 3D metal printing provide critical guidance in reducing porosity", Research Complex at Harwell |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.rc-harwell.ac.uk/success/showcase/new-insights-into-laser-3d-metal-printing-provide-crit... |
Description | Rahul Unnikrishnan visited Swansea university to further discuss powder interlayer bonding work |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Postgraduate students |
Results and Impact | Rahul Unnikrishnan visited Swansea university to further discuss powder interlayer bonding work |
Year(s) Of Engagement Activity | 2022 |
Description | Renault Sport - IT invited to give presentation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Industry/Business |
Results and Impact | IT gave keynote talk to representatives from Renault on Additive Manufacturing on 24.4.19. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.renault.co.uk |
Description | Research Showcase Article - Case Study: New study promises reduced wastage and energy consumption in automotive |
Form Of Engagement Activity | A magazine, newsletter or online publication |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Article to showcase the recent research developments aimed to promote research activities on "New study promises reduced wastage and energy consumption in automotive" |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwi47d3om7j9A... |
Description | Rheology of emulsion-based inks for robocasting", Qiaosong Cai gave presentation (Imperial College) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Rheology of emulsion-based inks for robocasting", Qiaosong Cai (Imperial College London - PhD student) gave presentation. Raised profile of MAPP. |
Year(s) Of Engagement Activity | 2019 |
Description | Richard France @ Industrial Strategy Challenge Fund Materials Mission 2 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Richard France participated in workshop organised by Innovate UK and EPSRC to scope ideas for Materials and Manufacturing ISCF |
Year(s) Of Engagement Activity | 2017 |
Description | Richard France @ UK Manufacturing Forum |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Richard France gave an overview of MAPP in a session on lower TRL manufacturing research activities. UK Manufacturing Forum - this was the first event organised by UK High Value Manufacturing Catapult (Sam Tuner) and UK Manufacturing Professors Forum (Mike Gregory). The aim was to bring together manufacturing research communities across universities (e.g. CIMs, Hubs, Manufacturing Professors Forum), the HVMC Catapult, industry and BEIS to discuss the UK's manufacturing research landscape and strategy in the context of the UK's Industrial Strategy and ISCF / IUK funding opportunities. |
Year(s) Of Engagement Activity | 2017 |
URL | https://hvm.catapult.org.uk/news-events-gallery/news/uk-manufacturing-forum-research-uk-success/ |
Description | Richard France @ UK Manufacturing Review Round Table Discussion |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Richard France participated in a Round Table Discussion on Additive Manufacturing, organised by the UK Manufacturing Review (Will Stirling) and the UK HVM Catapult. Particpants included companies with interest in AM, funders and HVM Catapult. The discussion featured in the 2017/2018 UK Manufacturing Review - hard copy of this went out to > 1000 contacts (manufacturing industries). |
Year(s) Of Engagement Activity | 2017 |
URL | http://www.ukmanufacturingreview.com/2017/ |
Description | Richard France @ UK Materials Research Exchange |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Richard France attended event. MAPP represented on Sheffield's stand - promoting information about the Hub and upcoming opportunities. |
Year(s) Of Engagement Activity | 2018 |
URL | http://www.mre2018.co.uk/ |
Description | Rolls Royce Hard Facings 2019 Community meeting - Rahul Unnikrishnan (PDRA Manchester) gave a 20 min oral presentation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | 25.9.2019 Rahul Unnikrishnan (MAPP PDRA Manchester) gave a 20 min oral presentation at RR Hardfacing 2019 meeting at Univ of Nottingham. The idea of coating alloy powders to generate a wide range of composition of HiPPed components were mentioned. This meeting was attended by Rolls Royce and UK Universities. |
Year(s) Of Engagement Activity | 2019 |
Description | Rolls Royce Service's Technology Student Conference, Derby - Presentation by Sam Lister |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Sam Lister talk: FAST forge process development . |
Year(s) Of Engagement Activity | 2023 |
Description | Rubén Lambert-Garcia talk at TMS2023 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Rubén Lambert-Garcia talk, Mapping the Laser Additive Manufacturing Process of Aluminium Alloys Through In-situ Synchrotron Radiography, California |
Year(s) Of Engagement Activity | 2023 |
Description | SABIC |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Meeting to discuss and scope out collaborative project |
Year(s) Of Engagement Activity | 2017 |
Description | SES Madrid - Prof Iain Todd - invited speaker ,10-12 October 2018 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd (MAPP Director) - invited speaker at SES (Society of Engineering Science) 55th Annual Technical meeting on 'Don't blame the metals: looking at additive manufacturing from the Material Perspective' |
Year(s) Of Engagement Activity | 2018 |
URL | http://ses2018.org/ |
Description | SV Notley, Presentation IJCNN 2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Variance Stabilised Optimisation of Neural Networks: A Case Study in Additive Manufacturing [#1491] |
Year(s) Of Engagement Activity | 2021 |
Description | Sandvik Materials Technology visit |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Visit from Micheal Hillring and Jan Lundstrom from Sandvik. Facilitated by Mark Priest, Specialist Advisor for Advanced Engineering, Manufacturing and Energy at Depertment for International Trade. Sandvik looking to set up two AM Applications Centres - one in EU and one in US. Sheffield (MAPP) was one of three potential sites in the UK. Discussion of our activities and Sandvik's ambitions and requirements. Further information submitted to Michael and Jan for their discussions with Board of Directors. |
Year(s) Of Engagement Activity | 2018 |
Description | School Internal Research Exchange Event 2019 - Jabbar Gardy gave presentation (Uni of Leeds) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Professional Practitioners |
Results and Impact | Jabbar Gardy gave presentation: Assessing triboelectric charging of metal/polymer powders used in Additive Manufacturing |
Year(s) Of Engagement Activity | 2019 |
Description | School Internal Research Exchange Event 2019 held at the University of Leeds - 3 Posters Presented (Jabbar Gardy, Yi He, Mozhdeh Mehrabi) 18/1/19 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | School of Chemical and Process Engineering, University of Leeds Internal Research Exchange Event 2019 - to disseminate research by the school. 3 posters presented Dr Jabbar Gardy - MAPP PDRA Dr Yi He - MAPP PDRA Mozhdeh Mehrabi - MAPP PhD student |
Year(s) Of Engagement Activity | 2018 |
URL | https://engineering.leeds.ac.uk/events/event/289/internal_research_exchange_event |
Description | School visit from Kirk Balk Academy on 18.9.19 to University of Sheffield |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | Local |
Primary Audience | Schools |
Results and Impact | 30 Y10 children from Kirk Balk Academy (Barnsley) visited MAPP labs at University of Sheffield to learn more about Additive Manufacturing Team. Kamran Mumtaz (MAPP Co-I) gave mini lecture. PDRA's and PhD students also involved in the visit. |
Year(s) Of Engagement Activity | 2019 |
Description | Second FAST/SPS Conference, Warsaw, Poland - Martin Jackson Keynote talk |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Martin Jackson keynote talk: Exploitation of FAST/SPS to Recycle Surplus Metal Powder for Sustainable Solutions and Near-Net Shape Components. (Sam Lister delivered on behalf of MJ) |
Year(s) Of Engagement Activity | 2023 |
URL | https://fast-sps.pit.lukasiewicz.gov.pl/conference-program-framework-2nd-2/ |
Description | Session Keynote, 23rd International Conference on Electrical Machines (ICEM'2018) Prof P Withers (Manchester) 03/09/18 with co-authors Prof Peter Lee/ Dr Leung /Todd/ Tammas-Williams on paper |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Keynote talk, Withers, 'Insights into additive manufacturing and mechanical performance by real time and time lapse x-ray imaging' - 23rd International Conference on Electrical Machines (ICEM'2018) Authors Withers (Manchester MAPP Co-I, Leung (UCL MAPP PDRA), Lee (UCL MAPP PI), Tammas-Williams (Sheffield MAPP PDRA), Todd (Sheffield MAPP Director/PI) |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.icem.cc/2018/ |
Description | Sheffield-Leicester PhD/RA Seminar on AI for manufacturing |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Postgraduate students |
Results and Impact | Networking event-workshop with MAPP and non-MAPP PhDs/RAs from Leicester University. |
Year(s) Of Engagement Activity | 2017 |
Description | Solar Turbine |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Meeting with Solar Turbine - Doug Rawlins (Advanced Technology Manager) and David Voss (University Liaison Manager) - discuss potential collaboration. |
Year(s) Of Engagement Activity | 2017 |
Description | Solid Freeform Fabrication (SFF) Conference, Texas, USA - Presentation by H. Cagler |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | H.Caglar talk: Multiple 450nm Diode Laser Processing of Ti64 Powder |
Year(s) Of Engagement Activity | 2023 |
URL | https://utw10945.utweb.utexas.edu/2023-table-contents |
Description | Speaking at International Solid Freeform Fabrication Symposium, Austin, Texas - talk by Zicheng Zhu 'An Experimental Study of the Influence of Energy Input on Porosity and Mechanical Properties of Nylon 12 Parts Produced via High Speed Sintering' |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Presentation authored by Zicheng Zhu (MAPP PDRA), Sam Tammas-Williams(MAPP PDRA) Candice Majewski(MAPP Co-I) on An Experimental Study of the Influence of Energy Input on Porosity and Mechanical Properties of Nylon 12 Parts Produced via High Speed Sintering |
Year(s) Of Engagement Activity | 2018 |
URL | http://sffsymposium.engr.utexas.edu/ |
Description | Speaking at International Solid Freeform Fabrication Symposium, Austin, Texas 13-16 August 2018 'Introduction of antimicrobial properties into Laser Sintered polymers' |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Speaking at International Solid Freeform Fabrication Symposium, Austin, Texas on 'Introduction of antimicrobial properties into Laser Sintered polymers' 4 day event 13-16 August 2018 Presentation authored by TUOS - Candice Majewski (MAPP Co-I) James Wingham (MAPP aligned), Robert Turner (MAPP aligned), Thomas Paterson(MAPP aligned), Joanna Shepherd (MAPP aligned), |
Year(s) Of Engagement Activity | 2018 |
URL | http://sffsymposium.engr.utexas.edu/ |
Description | Speaking at International Solid Freeform Fabrication Symposium, Austin, Texas on 'Interactions between microbes and laser sintered polymers' 4 day event 13-16 August 2018 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Speaking at International Solid Freeform Fabrication Symposium, Austin, Texas on 'Interactions between microbes and laser sintered polymers' 4 day event 13-16 August 2018 Presentation authored by Candice Majewski (TUOS MAPP Co-I) and Robert Turner, James Wingham, Thomas Paterson, Joanna Shepherd (MAPP aligned PDRA's) |
Year(s) Of Engagement Activity | 2018 |
URL | http://sffsymposium.engr.utexas.edu/ |
Description | Speaking at International Solid Freeform Fabrication Symposium, Austin, Texas on 'Not just Nylon... improving the range of materials for High Speed Sintering' |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Speaking at International Solid Freeform Fabrication Symposium, Austin, Texas on 'Not just Nylon... improving the range of materials for High Speed Sintering' Paper authored by Candice Majewski (TUOS MAPP Co-I) Ryan Brown, Tace Morgan (MAPP aligned PDRA's) |
Year(s) Of Engagement Activity | 2018 |
URL | http://sffsymposium.engr.utexas.edu/ |
Description | Sustain Hub Launch - Royal Society - Iain Todd attended |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd attended SUSTAIN Hub Launch (Royal Society) on 4.12.19 Raised MAPP profile for potential future collaborations |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.sustainsteel.ac.uk/ |
Description | TCT Conference - Karen Wood and Danielle Harvey attended 25/9/18 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Karen Wood, (MAPP Project Manager) and Danielle Harvey (MAPP Marketing & Communications Officer) both attended TCT Conference, raising MAPP profile and networking. |
Year(s) Of Engagement Activity | 2018 |
URL | https://tctshow.com/tctshow/en/page/home |
Description | TCT Magazine Article - Candice Majewski |
Form Of Engagement Activity | A magazine, newsletter or online publication |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Candice Majewski features in - What more can the additive manufacturing industry do to ensure diversity & inclusion? And why does it matter? |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.tctmagazine.com/additive-manufacturing-3d-printing-industry-insights/latest-additive-man... |
Description | TIPE Women in 3D printing conference |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Candice Majewski was a moderator for the Technology Track at this conference |
Year(s) Of Engagement Activity | 2022 |
URL | https://womenin3dprinting.com/ |
Description | TMS 2019 Annual Meeting, March 2019 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | UCL group attending presenting "Ultrasonic Processing of Liquid and Solidifying Alloys' abstract" |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.tms.org/TMS2019/Home/TMS2019/Default.aspx?hkey=18424fbe-f410-46d8-92a5-a7ca19c54ee3 |
Description | TMS 2024, Orlando, Florida - Presentation by Alex Slaone |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Alex Sloane talk: From Part Geometry to Melt Pool Geometry: Scan Strategies to Predict and Prevent Defects |
Year(s) Of Engagement Activity | 2024 |
URL | https://www.tms.org/TMS2024/Home/TMS2024/Default.aspx?hkey=54504ea7-8339-4a6d-855c-30ecc0bfe027 |
Description | TMS 2024, Orlando, Florida - Presentation by James Pepper |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | James Pepper talk: Controlling and Designing Thermal Gradients during FAST Processing of Titanium Alloy /Composite |
Year(s) Of Engagement Activity | 2024 |
URL | https://www.tms.org/TMS2024/Home/TMS2024/Default.aspx?hkey=54504ea7-8339-4a6d-855c-30ecc0bfe027 |
Description | TMS 2024, Orlando, Florida - Presentation by K. Christofidou |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | K. Christofidou talk: Grain structure control through site selective exploitation of recrystallisation mechanisms in LPBF Ni-based superalloys |
Year(s) Of Engagement Activity | 2024 |
URL | https://www.tms.org/TMS2024/Home/TMS2024/Default.aspx?hkey=54504ea7-8339-4a6d-855c-30ecc0bfe027 |
Description | TMS 2024, Orlando, Florida - Presentation by Lucia Scotti |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Lucia Scotti talk: A Digital Thread for field assisted sintering of titanium components |
Year(s) Of Engagement Activity | 2024 |
URL | https://www.tms.org/TMS2024/Home/TMS2024/Default.aspx?hkey=54504ea7-8339-4a6d-855c-30ecc0bfe027 |
Description | TMS2023, San Diego, Poster Presentation by Lucy Farquhar |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Poster presentation by Lucy Farquhar: Development and Assessment of a Novel TiVNbMo-based Refractory High Entropy Alloy Manufactured by Laser Powder Bed Fusion for High Temperature Application |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.tms.org/TMS2023/TMS2023/Default.aspx |
Description | TMS2023, San Diego, Presentation by Cameron Barrie |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Cameron Barrie talk: AddFAST: A Hybrid Technique for Tailoring Microstructures in Titanium-Titanium Composites |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.tms.org/TMS2023/TMS2023/Default.aspx |
Description | TMS2023, San Diego, Presentation by Elaine Livera |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Elaine Livera talk: Microstructural Control of LPBF Inconel 718 through Post Processing of Intentionally Placed AM Discontinuity Distributions |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.tms.org/TMS2023/TMS2023/Default.aspx |
Description | TMS2023, San Diego, Presentation by Sam Lister |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Sam Lister talk: A New Hybrid Manufacturing Approach to Diffusion Bond and Functionally Grade Materials Demonstrated Through Titanium Alloys and Nickel-based Superalloys |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.tms.org/TMS2023/TMS2023/Default.aspx |
Description | Talk Y Chen, AAMS22 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk Y Chen, AAMS22, "New Insights into Laser Additive Manufacturing from Multimodal Synchrotron X-ray"m accpted |
Year(s) Of Engagement Activity | 2022 |
Description | Talk given at Alloys for Additive Manufacturing Symposium, Dr S Clark, Alloys for Additive Manufacturing Symposium (04/09/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Dr Sam Clark (MAPP PDRA)- gave 20 minutes oral presentation at AAMS. This international event covered additive manufacturing technologies [AM] which include a metallic phase and was divided into 5 themes over two days : Phase transformations in AM-produced alloys, Alloy design, Advances in processing, Structural control by design, Novel concepts in alloy metamaterials. The AAMS was attended by 105 delegates from industry and academia. |
Year(s) Of Engagement Activity | 2018 |
URL | https://mapp.ac.uk/news/successful-alloys-for-additive-manufacturing-symposium-aams2018 |
Description | Talk, ASTM International Conference on Additive Manufacturing |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | G Soundarapandiyan, CLA Leung, C Johnston, A Bhatt, RHU Khan, RC Atwood, C Chen, PD Lee, ME Fitzpatrick - Presentation at the ASTM International Conference on Additive Manufacturing entitled "Effect of poswer feedstock blending on the structural integrity of laser powder bed fused Ti6AI4V components". |
Year(s) Of Engagement Activity | 2020 |
Description | Talk, "For the love of engineering show - feature a unique blend of short films, music, science comedy and engineering research", UCL, Oct 2019 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Public/other audiences |
Results and Impact | Peter D Lee & Le Gall gave a presentation of the research carried out in our group to the general public in a London West End Theatre |
Year(s) Of Engagement Activity | 2019 |
URL | https://mecheng.ucl.ac.uk/events/for-the-love-of-engineering/ |
Description | Talk, A Bhatt, MAPP Virtual Meeting |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | A Bhatt gave a presentation entitled "Analysing Surface Roughness for Fabrication of Nano Biomedical Sensors Printing for Hybrid AM Techniques" at MAPP Virtual Meeting |
Year(s) Of Engagement Activity | 2020 |
Description | Talk, A Kao, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | A Kao gave a presentation entitled "Controlling Additive Manufacturing Processes with Magnetic Fields" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, C Iantaffi, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | C Iantaffi gave a presentation entitled "The Mechanisms Behind the Effect of Oxygen on DED AM Ti Alloy Build" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, C Xu, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | C Xu gave a presentation entitled "Synchrotron Examination of Nucleation and Growth of Nodular and Compacted Graphite Particles during Cyclic Solidification of Ductile Cast Iron" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, C. Lantaffi, TMS 2022 Annual Meeting, |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk, C. Lantaffi, TMS 2022 Annual Meeting, Large-Strain Compressive Response and Failure Mechanisms of Additively Manufactured Cubic Chiral Lattices |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, C. Lantaffi, TMS 2022 Annual Meeting, |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk, C. Lantaffi, TMS 2022 Annual Meeting, In situ monitoring and post operando analysis of additive manufactured dissimilar alloys: AlSi10Mg and Ti6Al4V |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, CLA Leung, TMS 2022 Annual Meeting |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | "Talk, CLA Leung, TMS 2022 Annual Meeting, Improved near-infrared absorption for additive manufacturing feedstock using reduced graphene oxide" |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, CLA Leung, TMS 2022 Annual Meeting, |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk, CLA Leung, TMS 2022 Annual Meeting, |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, CLA Leung, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | CLA Leung gave a presentation entitled "Quantifying the Influence of Local Layer Thickness on Pore Evolution during Laser Powder Fusion Using High-speed X-ray Imaging" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, D Rees, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | D Rees gave a presentation entitled "Synchrotron Imaging of the Influence of TiB2 in Suppressing Hot Cracking during Laser Powder Bed Fusion of Al-2139" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, D.Rees, TMS 2022 Annual Meeting, |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | "Talk, D.Rees, TMS 2022 Annual Meeting, Synchrotron X-ray imaging of cracking during laser powder bed fusion (LPBF) of aged CM247 powder with varying oxygen content" |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, Farheen Ahmed, TMS, Feb 2020, "Phase Evolution During Selective Laser Melting ... |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Farheen Ahmed gave a talk at the TMS 2020 Annual Meeting & Exhibition, on "Phase Evolution During Selective Laser Melting of a High-Fe ß-Ti Alloy From Elemental Powder" |
Year(s) Of Engagement Activity | 2020 |
URL | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/1DED883D92983DDE85258424005A1971?OpenDocume... |
Description | Talk, J Jakumeit, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | J Jakumeit gave a presentation entitled "Particle Resolved Simulation of Laser Powder-bed Fusion Including Metal Evaporation and Vapor Plume Dynamics" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, L Sinclair, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | L Sinclair gave a presentation entitled "In Situ Imaging of the Effect of Gas Flowrates on Directed Energy Deposition" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, L Yuan, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | L Yuan gave a presentation entitled "Prediction of Columnar-to-equiaxed Transition in Single Tracks during Laser Powder Bed Fusion Additive Manufacturing" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, M. Fitzpatrick, TMS 2022 Annual Meeting, |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk, M. Fitzpatrick, TMS 2022 Annual Meeting, Comparison of benefits and limitations of high temporal versus low temporal resolution of in situ in operando AM imaging of superalloys |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, MAPP Industry Partner Briefing Day, April 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Chu Lun Alex Leung gave a talk at the MAPP Industry Partner Briefing Day, on "Shedding new light into laser powder bed fusion process with synchrotron X-ray" |
Year(s) Of Engagement Activity | 2019 |
URL | https://mapp.ac.uk/galleries/mapp-industry-partner-briefing-2019 |
Description | Talk, N Shevchenko,EUROMAT2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | N Shevchenko, A Kao, X Fan, C Tonry, R Atwood, P Lee, K Pericleous, S Eckert, "Segregation Channel Dynamics in Directionally Solidifying Ga-In Alloy with and without a Magnetic Field" at EUROMAT2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, PD Lee, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | PD Lee gave an invited plenary presentation entitled "In Situ and Operando Synchrotron Experiments for Additive Manufacturing Model Validation" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, S Bhagavath, TMS 2022 Annual Conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk, S Bhagavath, TMS 2022 Annual Conference, Porosity defects in High pressure die castings: Mechanisms and Uncertainties. |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, S Clark, MCWASP XV, virtual conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | S Clark gave a presentation entitled "Capturing Marangoni flow via Synchrotron Imaging of Selective Laser Melting" at the Modelling of Casting, Welding and Advanced Solidification Processes 2020 virtual conference. |
Year(s) Of Engagement Activity | 2020 |
Description | Talk, S Clark, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | S Clark gave a presentation entitled "Synchrotron Calibrated Lagrangian Particle Tracking of Melt-pool Ejections during Laser Powder Bed Fusion" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, S Marussi, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | S Marussi gave a presentation entitled "An In Situ and Operando Additive Manufacturing Process Replicator for High Speed Optical, Infra-red and Synchrotron X-ray Imaging" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, S.Marussi, TMS 2022 Annual Meeting |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk, S.Marussi, TMS 2022 Annual Meeting, Blown powder additive manufacturing process replicator for high speed optical, infra-red and synchrotron X-ray imaging |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, Solidification Workshop, Brunel University, Oct 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Samuel Clark gave a talk at the Solidification Workshop, Brunel University on "Observations of Solidification in Selective Laser Melting and Directed Energy Deposition using Process Replicators for Synchrotron X-rays" |
Year(s) Of Engagement Activity | 2019 |
Description | Talk, T Wigger, EUROMAT2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | T Wigger, T Andriollo, C Xu, S Clark, R Atwood, N Tiedje, PD Lee, M Azeem, talk entitled "In situ quantification of degenerate graphite nodule formation during the solidification of ductile cast iron" at EUROMAT2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, T Wigger, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | T Wigger gave a presentation entitled "In Situ Quantification of Degenerate Graphite Nodule Formation during the Solidification of Ductile Cast Iron" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, T Wigger, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | T Wigger gave a presentation entitled "In-situ X-Ray Diffraction Investigation of High-strain Rate, High-temperature Deformation in Microalloyed Steel" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, TMS 2019 Annual Meeting, March 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Chu Lun Alex Leung gave a talk at the TMS 2019 Annual Meeting, on 'Unravelling cracking phenomena during laser additive manufacturing of Ni-based superalloy by multi-modal imaging" |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.tms.org/tms2019 |
Description | Talk, TMS 2019 Annual Meeting, March 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Yunhui Chen gave a talk at the TMS 2019 Annual Meeting, on 'In situ and operando synchrotron quantification of transient defect dynamics during Additive Manufacturing of Ti-6Al-4V' |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.tms.org/tms2019 |
Description | Talk, TMS 2019 Annual Meeting, March 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Samuel Clark gave a talk at the TMS 2019 Annual Meeting, San Antonio, Texas, USA, 10th-14th March, 2019 on "Operando quantification of the phase transformations in additive manufacturing" |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.tms.org/tms2019 |
Description | Talk, TMS 2020 Annual Meeting & Exhibition, Feb 2020 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Professor Peter D Lee gave a talk at the TMS 2020 Annual Meeting & Exhibition, on "Capturing Pore Formation during Laser Blown Powder Directed Energy Deposition" |
Year(s) Of Engagement Activity | 2020 |
URL | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/1DED883D92983DDE85258424005A1971?OpenDocume... |
Description | Talk, TMS 2020 Annual Meeting & Exhibition, Feb 2020 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | "Samuel Clark gave a talk at the TMS 2020 Annual Meeting & Exhibition on ""Capturing Marangoni flow via Synchrotron Imaging of Laser Blown Powder Directed Energy Deposition""" |
Year(s) Of Engagement Activity | 2020 |
URL | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/1DED883D92983DDE85258424005A1971?OpenDocume... |
Description | Talk, TMS 2020 Annual Meeting & Exhibition, Feb 2020 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Chu Lun Alex Leung gave a talk at the TMS 2020 Annual Meeting & Exhibition, on "Synchrotron validated simulations of pore formation during laser powder bed fusion of nickel superalloys" |
Year(s) Of Engagement Activity | 2020 |
URL | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/1DED883D92983DDE85258424005A1971?OpenDocume... |
Description | Talk, TMS 2020 Annual Meeting & Exhibition, Feb 2020 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Tim Wigger gave a talk at the TMS 2020 Annual Meeting & Exhibition, on "In-situ Tomographic Investigation of Co-base Alloy Solidification Features" |
Year(s) Of Engagement Activity | 2020 |
URL | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/1DED883D92983DDE85258424005A1971?OpenDocume... |
Description | Talk, TMS 2020 Annual Meeting & Exhibition, Feb 2020 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Yunhui Chen gave a talk at the TMS 2020 Annual Meeting & Exhibition, on "In situ and Operando X-ray Imaging of the Laser Blown Powder Directed Energy Deposition Process" |
Year(s) Of Engagement Activity | 2020 |
URL | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/1DED883D92983DDE85258424005A1971?OpenDocume... |
Description | Talk, TMS 2020 Annual Meeting & Exhibition, Feb 2020 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Lorna Sinclair gave a talk at the TMS 2020 Annual Meeting & Exhibition on "In situ synchrotron X-ray imaging of titanium alloy powder sintering during Laser Blown Powder Directed Energy Deposition" |
Year(s) Of Engagement Activity | 2020 |
URL | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/1DED883D92983DDE85258424005A1971?OpenDocume... |
Description | Talk, TMS 2020 Annual Meeting & Exhibition, Feb 2020 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Tim Wigger gave a talk at the TMS 2020 Annual Meeting & Exhibition, on "In-situ Synchrotron Examination of the Evolution and Transition of Nodular, Compacted and Laminar Graphite During Solidification of Cast Iron" |
Year(s) Of Engagement Activity | 2019 |
URL | http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/1DED883D92983DDE85258424005A1971?OpenDocume... |
Description | Talk, Tempmeko Conference, Chengdu, China, June 2019 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | L. Stanger gave a talk at the Tempmeko Conference in Chengdu, China on "High temperature near infra-red thermal microscopy for selective laser melting additive manufacturing" |
Year(s) Of Engagement Activity | 2019 |
Description | Talk, X Fan at UK-Russia links workshop |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | X Fan gave a talk entitled "Thermoelectric magnetohydrodynamic control of melt pool dynamics and microstructure evolution in direct energy deposition additive manufacturing" at UK-Russia links workshop on 'Phase Transition in External Fields'. |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, X Fan, TMS 2022 Annual Meeting, |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk, X Fan, TMS 2022 Annual Meeting, Thermoelectric magnetohydrodynamic control of melt pool dynamics and microstructure evolution in direct energy deposition additive manufacturing |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, X Fan, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | X Fan gave a presentation entitled "Understanding the Role of Magnetic Fields on Freckle Formation during Solidification through In Situ Imaging" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, Y Chen, MCWASP XV, virtual conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Y Chen gave a presentation entitled "In situ and Operando X-ray Imaging of the Laser Blown Powder Directed Energy Deposition Process" at the Modelling of Casting, Welding and Advanced Solidification Processes 2020 virtual conference. |
Year(s) Of Engagement Activity | 2020 |
Description | Talk, Y Chen, NIST virtual conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Y Chen gave a presentation entitled "Insitu and operando x-ray imaging and diffraction of the laser blown powder directed energy deposition process / Technical aspects of synchrotron x-ray and neutron measurements for diffraction microstructure imaging" at the NIST virtual conference. |
Year(s) Of Engagement Activity | 2020 |
Description | Talk, Y Chen, NIST webinar |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Y Chen gave a presentation entitled "Understanding Directed Energy Deposition Additive Manufacturing Process using In situ and Operando X-Ray Imaging and Diffraction" at the NIST webinar. |
Year(s) Of Engagement Activity | 2020 |
Description | Talk, Y Chen, Rolls-Royce |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Yunhui Chen gave a presentation entitled "Overview of in situ DED AM research activities at Harwell" to Rolls-Royce Holdings plc at Derby, UK. |
Year(s) Of Engagement Activity | 2020 |
Description | Talk, Y Chen, TMS2021 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Y Chen gave a presentation entitled "In Situ Synchrotron Observation of Directed Energy Deposition Additive Manufacturing Process" at TMS2021 |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, Y Huang at UK-Russia links workshop |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Y Huang gave a talk entitled "Keyhole pore evolution during laser powder bed additive manufacturing" at UK-Russia links workshop on 'Phase Transition in External Fields'. |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, Y Huang, MAPP Virtual Meeting |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Y Huang, gave a presentation entitled "Observation and Quantification of Keyhole and Keyhole Pore Dynamics in High-speed Laser Melting" at MAPP Virtual Meeting |
Year(s) Of Engagement Activity | 2020 |
Description | Talk, Y Huang, TMS 2022 Annual Conference |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | Talk, Y Huang, TMS 2022 Annual Conference, Keyhole melting regimes and porosity formation during laser powder bed fusion additive manufacturing |
Year(s) Of Engagement Activity | 2021 |
Description | Talk, Y. Chen, TMS 2022 Annual Meeting, |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Talk, Y. Chen, TMS 2022 Annual Meeting, Deformation and Microstructure Development in DED-AM structures via Dark Field X-ray Microscopy and in situ imaging |
Year(s) Of Engagement Activity | 2021 |
Description | ToScA 2018 - RMS 6th annual Tomography for Scientific Advancement (ToScA) symposium - Prof Peter Lee (10/09/18) |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Keynote talk, Prof Peter Lee (UCL MAPP PI), ' In situ and operando synchrotron tomographic characterisation of semi-solid processing' at 6th annual Tomography for Scientific Advancement (ToScA) symposium , Royal Microscopical Society (10-12 Sept 3 day event) |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.rms.org.uk/discover-engage/event-calendar/tosca-2018.html |
Description | Town Hall Meeting - Manufacturing the Future utilising the UK's Large Facilities - event organised by UCL |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Peter Lee (MAPP Co-Investigator UCL) organised Town Hall meeting on Manufacturing the Future and utilising UK's Large Facilities - bringing together all EPSRC Hubs, sponsors and industry. Objectives - set the national agenda for Hubs and industry engagement with large facilities, strategic industry input on how to increase translation from large facilities, options and funding mechanisms to take forward. Several representatives from MAPP including Iain Todd and Richard France attended. |
Year(s) Of Engagement Activity | 2019 |
Description | Toyko-Opticon SPIE |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Multiple papers submitted by Rob Snell from the University of Sheffield. |
Year(s) Of Engagement Activity | 2020 |
URL | https://spie.org/AS/entireprogram/2020-12-15 |
Description | UK Fluids Conference 2023, Glasgow, UK - Presentation by Tushar Srivastava |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Tushar Srivastava talk: An Experimental Study of Droplets Colliding with Airborne Particles |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.gla.ac.uk/events/conferences/ukfc2023/ |
Description | UK Manufacturing Forum - Richard France attended |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Richard France (MAPP Senior Business Development Manager attended UK Manufacturing Forum and participated in workshop activities on developing University - HVM Catapult collaboration Attended 09.12.19 - 10.12.19 |
Year(s) Of Engagement Activity | 2019 |
Description | UK Research and Innovation Launch Event |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | PDL Participated in UK Research and Innovation (implementing policy) |
Year(s) Of Engagement Activity | 2018 |
URL | https://blogs.bl.uk/living-knowledge/2018/05/uk-research-and-innovation-launched-at-the-british-libr... |
Description | UKRI Research Infrastructure Roadmap Workshop |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | PDL Participated in UKRI Research Infrastructure Roadmap Workshop (implementing policy) on 14 June |
Year(s) Of Engagement Activity | 2018 |
Description | UKRI Research Infrastructures Roadmap Workshop: Physical Sciences and Engineering (PS&E) Sector - Prof Peter Lee (UCL) 29/01/19 |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Peter Lee (MAPP UCL PI) participated in UKRI Research Infrastructures Roadmap Workshop: Physical Sciences and Engineering (PS&E) Sector workshop (implementing policy) |
Year(s) Of Engagement Activity | 2018 |
Description | University press release on 5th December announcement |
Form Of Engagement Activity | A press release, press conference or response to a media enquiry/interview |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Media (as a channel to the public) |
Results and Impact | Announcement confirmed a £10million investment from Engineering and Physical Sciences Research Council (EPSRC) for the University of Sheffield to lead The Manufacture using Advanced Powder Processes (MAPP) Hub. |
Year(s) Of Engagement Activity | 2016 |
URL | https://www.sheffield.ac.uk/news/nr/university-of-sheffield-takes-centra-role-in-uks-new-future-manu... |
Description | V Yakubov poster at APICAM23 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | V Yakubov poster at APICAM23 "Understanding residual stress and texture in additive friction stir deposited aluminium alloy" Australia |
Year(s) Of Engagement Activity | 2023 |
Description | Visit by Joseph Oluleke (Carpenter Additive) to ESRF |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Visit by Joseph Oluleke (Carpenter Additive) to ESRF, "Study Effects of Powder Oxidation on Melt Pool Dynamics using Ultr-fast X-ray Imaging", Grenoble (France) |
Year(s) Of Engagement Activity | 2023 |
Description | Visit by Solar Turbines to MAPP (hosted by Iain Todd) 22.3.19 |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Solar Turbines visited University of Sheffield to discuss going forwards with supporting an Additive Manufacturing PhD student, which they then supported. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.solarturbines.com/en_US/index.html |
Description | Visit from Oerlikon to MAPP at University of Sheffield 17.9.19 |
Form Of Engagement Activity | Participation in an open day or visit at my research institution |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd (MAPP Director) and Dr Richard France (MAPP SBDM) met with senior delegation from Oerlikon (CTO, Head of AM) to discuss potential collaboration |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.oerlikon.com/en/ |
Description | Visit to TWI Sheffield - Prof Iain Todd 4/2/19 |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | Prof Iain Todd, MSE Business Development Manager and Russell Goodall (academic from MSE) met with reps from TWI to discuss potential future collaborations. |
Year(s) Of Engagement Activity | 2018 |
URL | https://www.twi-global.com/ |
Description | Winter school on Additive Manufacturing of Metals, Madrid - Prof Iain Todd giving presentation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Prof Iain Todd (MAPP Director) attended IMDEA Winter school (14.1.20 - 15.1.20 ) on Additive Manufacturing of Metals, Madrid and gave invited talk. Raised MAPP profile |
Year(s) Of Engagement Activity | 2019 |
URL | https://materials.imdea.org/ |
Description | Women in 3D Printing Happy Hour |
Form Of Engagement Activity | A formal working group, expert panel or dialogue |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Candice Majewski was a panelist on a round table discussion to discuss careers in 3D printing. |
Year(s) Of Engagement Activity | 2020 |
URL | https://www.linkedin.com/posts/elvira-leon-moreno_womenin3dprinting-activity-6731985285162307584-PmE... |
Description | World PM 2022 |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Industry/Business |
Results and Impact | Simon Graham delivered a keynote at WorldPM 2022 Conference titled "Solid-State Processing of Surplus Aluminum Alloy Powders through a Combination of Field Assisted Sintering Technology and Hot Rolling |
Year(s) Of Engagement Activity | 2022 |
URL | https://www.worldpm2022.com/keynote-papers/ |
Description | World Titanium Alloy Conference - Ben Thomas and Martin Jackson (Sheffield) attended |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | plenary and keynote presentations Ben Thomas (PDRA MAPP) , Martin Jackson (Co-I MAPP,) both University of Sheffield attended. Impacts include 1) Development and networking opportunties for MAPP related staff/students; (2) Raised the profile of MAPP activities to an international audience; (3) The UK will be hosting the next World Ti conference and will be Chaired by MAPP Co-I. That Sheffield and MAPP are world leading in FAST and AM activities. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.titanium2019.com/ |
Description | World Titanium Conference - Presentation by Hugh Banes |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Hugh Banes talk: A microstructural modelling framework for additive manufacture of Ti-6AL-4V |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference - Presentation by James Pepper |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | James Pepper talk: Titanium/Titanium Diboride Composite Field-Assisted Sintering Technology (FAST) Process Mapping for Potential Armour Production |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference - Presentation by Jiaqi Xu |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Jiaqi Xu talk: Consolidation study of Ti-Fe elemental powders during Hot Isostatic Pressing by Time-Lapse X-Ray computed Tomography |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference - Presentation by Sam Lister |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Sam Lister talk: A ballistic Assessment of waste titanium processed using field-assisted sintering rechnology (FAST) |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference in Edinburgh, Chairman's Welcome Talk |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Martin Jackson was the conference chair and gave the Chairman's Wecome Talk at the World Titanium Conference in Edinburgh |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference in Edinburgh, Plenary talk |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Martin Jackson gave a Plenary Talk at the World Titanium Conference in Edinburgh: Titanium Research Developments in the United Kingdom |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference, Gavin Baxter Session Chair |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Gavin Baxter was a session chair |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference, James Pepper Session Chair |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | James Pepper was a session chair. |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference, Martin Jackson Session Chair |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Martin Jackson was a session chair |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference, Presentation by Cameron Barrie |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Cameron Barrie talk: AddFAST: A Hybrid Technique for Tailoring Microstructures in Titanium-Titanium Composites |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | World Titanium Conference, Sam Lister Session Chair |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Sam Lister was a session chair |
Year(s) Of Engagement Activity | 2023 |
URL | https://www.iom3.org/events-awards/world-titanium-conference-2023.html |
Description | X Fan and D Rees, DLS SR school |
Form Of Engagement Activity | Participation in an activity, workshop or similar |
Part Of Official Scheme? | No |
Geographic Reach | National |
Primary Audience | Industry/Business |
Results and Impact | X Fan and D Rees attend the DLS SR School |
Year(s) Of Engagement Activity | 2021 |
Description | YCAM Forum (Italy) Eduardo Saiz gave keynote |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | ES gave Keynote at 2018 yCAM Forum, Padova, Italy, May 2018.Robotic assisted deposition of ceramics. Raised profile of MAPP activity |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.euroceram.org/en/events/ycam-2018-forum/ |
Description | YCAM Poster |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Postgraduate students |
Results and Impact | Shitong Zhou from Imperial College London presented her work at YCAM to researchers working on 3D printing of ceramics in industry and ademy. |
Year(s) Of Engagement Activity | 2020 |
URL | https://www.euroceram.org/en/events/ycam-2020-forum/ |
Description | Young Ceramists Additive Manufacturing Forum (yCAM) - Qiasong Cai gave presentation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Qiaosong Cai (MAPP PhD Student) gave presentation at young Ceramists Additive Manufacturing Forum (yCAM)"Robocasting of structural ceramics with core-shell structures" Raised profile of MAPP |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.euroceram.org/en/events/ycam-2019-forum/ |
Description | Young Ceramists Additive Manufacturing Forum (yCAM) 2019 -Iuliia Elizarova gave presentation |
Form Of Engagement Activity | A talk or presentation |
Part Of Official Scheme? | No |
Geographic Reach | International |
Primary Audience | Professional Practitioners |
Results and Impact | Iuliia Elizarova (MAPP PDRA, Imperial College London) gave presentation at young Ceramists Additive Manufacturing Forum (yCAM)Raised profile of MAPP. |
Year(s) Of Engagement Activity | 2019 |
URL | https://www.euroceram.org/en/events/ycam-2019-forum/ |